advertisement
Lighting Controls
iLight Product Catalogue
English - Issue 7.0
iLight Lighting Controls
Creatively translating our clients' lighting visions into reality is at the heart of what we do.
the intelligence and breadth of our product range is extensive; from powerful yet easy to use software, to elegant control panels and a range of source controllers to dim and control all load types and save energy. What’s more, as our products are both practical and upgradeable, they are easy to install and economical to own.
For more than 40 years our staff have led the way setting exacting standards of service. We pride ourselves on providing rapid response to enquiries, detailed quotations and autoCaD system drawings as well as our helpful customer support, experienced commissioning teams and flexible 24 hour maintenance contracts to complete the equation. iLight control products can be found in any environment where pre-programmed or timed lighting control is required. there are a huge variety of applications including hotels, restaurants, retail shopping developments, places of worship, conference centres, office buildings, ocean liners, theme parks, 'smart' homes and more.
2 eaton Corporation eaton's Cooper Controls Group
eaton's Cooper Controls Business
Eaton's Cooper Controls Business is a specialist lighting controls manufacturer with more than 40 years of operational expertise in the design, supply and support of lighting control systems in the architectural, entertainment and energy saving markets. Our focus is to deliver innovation, reliability and flexibility through our portfolio of industry leading systems including iLight Series, Zero
88 Series and Greengate Series.
Lighting Controls Code Compliance
• improves BreeaM & LeeD scoring for building sustainability.
• Contributes to energy reduction targets under Climate Change
•
Levy (CCL) and Carbon reduction Commitment (CrC).
Qualifies for Enhanced Capital Allowance (ECA) applications.
• Delivers lighting control requirements under UK Building regs
- L2a & L2b and Bre: 498.
achievable energy Savings
50%
our product Series
iLight Series
Global offering of architectural lighting control systems designed to create stunning visual impact and atmosphere in hospitality, restaurant, retail, residential, commercial & exterior applications.
•
•
•
Intuitive user interfaces
Scaleable network with distributed intelligence
Dimming and switching of all load types
www.ilight.co.uk
Greengate Series
•
•
•
Global offering of energy management lighting controls for commercial and industrial applications for both the
230V & 110V markets.
Flexible, scaleable lighting control networks
Occupancy sensors
Daylight harvesting
www.greengatecontrols.co.uk
Eaton & Cooper United
Cogent Series
•
•
•
Comprehensive range of single and colour changing LED luminaires including high quality downlights, wall lights, ground lights, flexible & modular strip systems.
Wide range of LED systems
Drivers and controls included
Custom solutions
www.cogentlighting.com
our combined strength enables us to look at the world through a larger lens, to see more possibilities and better opportunities. enabling you to more efficiently manage energy consumption, increase uptime and lower costs - while keeping personnel, equipment and data safe.
today’s eaton is building on a legacy of innovation in product design and manufacturing processes to bring you holistic solutions to your most critical power management challenges. We’re drawing a history of over 100 years of electrical power management expertise to create technology platforms that help accelerate the pace of new construction; modernize aging infrastructure; manage energy consumption; protect people, equipment and data.
We want to work closely with you to understand and solve the challenges you face today and those that may come tomorrow.
Zero 88 Series
Entertainment lighting control equipment and software for theatrical and performance applications around the world.
•
•
•
Lighting consoles and dimming racks
Colour changing LED controls
Control of moving and effect lighting
www.zero88.com
iLight Series - product Catalogue 3
The iLight Product Range
iLight's range of control products have been carefully designed to meet the needs of all people involved with a project including lighting and interior designers, installers and the final users of the system.
Design
We relish working with creative teams during the design phase. the exhaustive choice of products and peripherals within the iLight range can enhance the design process. the iLight range includes a comprehensive selection of source controllers that can control virtually any light source including LeD, resistive, capacitive and inductive loads, fluorescent 0-10V, DaLi and DSi, cold cathode, neon, DMX512 and switched loads.
Enjoy
at the front end of the system we offer a wide choice of user interfaces in a variety of styles and finishes to match in with individual tastes or themes. Cooper Controls offers a custom service for generating bespoke control panels. our cost effective LCD colour touchscreens can import graphics, logo’s or 3D building plans to create unique designs.
Installation
For those installing our products we have worked hard to ensure that they are straight forward and easy to install. the iLight network is connected using readily available network cabling and uses the extremely robust 'Canbus' protocol for communicating network messages.
Peace of Mind
When installed, operated and maintained correctly, the iLight product range is designed to be durable and reliable. We take our Ce compliance very seriously, utilising both in-house and independent test houses to ensure we comply. Cooper
Controls is iSo9001:2008 accredited and we offer a 30 month warranty on all of our products when using an iLight trained installer.
Distributed intelligence across the range also means that the system is easily scalable and unlike many alternative systems, is not reliant on a single central processor.
4 eaton Corporation eaton's Cooper Controls Group
Integration
The iLight network, products and associated accessories are designed to offer comprehensive, flexible and cost effective solutions for both lighting and integrated control systems. Our products offer a range of connectivity options and specialist features to ensure we can seamlessly integrate with third party equipment and control systems.
Architainment
The iLight network backbone can be built up over many kilometres, employing over 65,000 devices and where required, can interface with Ethernet networks (via cable or wireless). Entertainment 'show' control from DMX512 controllers, source controllers and control of intelligent fixtures or LED arrays are all part of the package.
Integration with a wide variety of devices is possible, from MIDI,
Radio Modems, RS232, RS485 as well as analogue voltage controls.
Residential
Smart Home owners increasingly expect fully integrated controls in their homes. With iLight’s scalable solutions, control of lighting, motorised curtains & blinds, audio visual, heating, integration with security systems and water features are all part of our offering.
Bespoke colour LCD touchscreen controllers, provide the ideal interface to control any system in the home.
Where integration is needed with AV systems such as Crestron or AMX, iLight offers a number of choices for efficient two way communication.
Commercial
When iLight lighting controls are the system of choice for the board room, meeting rooms, entrance halls, lifts, lobbies and exteriors, these can be effectively integrated with the building management systems, fire alarms and security. iLight offers a range of options from simple dry loop contact closure interfaces through to bespoke hardware and software integration. Standards employed include Ethernet, CAN, RS232,
RS485 and BACnet. In addition to this we offer a range of smart and programmable interface devices some with sequencing and programmable logic control.
iLight Series - product Catalogue 5
User Interfaces iLight user interfaces are flexible, powerful and easy to use. The simplicity of one button push hides the intelligence and sophistication of the iLight control system behind it; no matter how complex the change.
6 eaton Corporation eaton's Cooper Controls Group
A single button may instigate a series of timed events, colour changes or dynamic effects, or simply select pre-set levels and scenes to make great lighting design repeatable time after time.
Panels may be configured to match virtually any specification or finish. Touchscreens extend control capabilities with custom graphics and multiple pages to deliver against the most demanding customer requirement. All standard panels are supplied pre-loaded with a basic program for immediate use and to allow on-site testing prior to commissioning.
iLight control panels also integrate with Audio Visual and
Building Management Systems for an elegant, seamless building wide control solution.
iLight Series - product Catalogue 7
User Interfaces
Sencia
Sencia Series is a new range of highly refined control panels designed for good looks and flexibility.
Text legends are backlit, with text or graphic legends etched into them. The ultraflush buttons are individually dimmable to user requirements. Day mode provides clear illumination whilst night mode dims buttons down to a soft non invasive light level. As well as a wide range of standard button legends, custom text and graphics can also be provided.
Buttons come in four sizes which can be used to populate either single or double column plate formats. A maximum of 12 single height buttons can be used where multiple scene control is required. Alternatively double height buttons could be used to differentiate blind control functions.
With white illumination as standard, button caps can also be removed to insert a colour filter to change the button colours to one of 6 standards hues.
Sencia control panels are available in a range of high quality metal finishes including, Brushed Stainless Steel, Bright Chrome,
Polished Brass and White with other finishes available on special order.
•
•
•
Key Features
•
•
•
•
•
Up to 14 configurable push buttons with integral LED backlighting on a single gang panel.
Integral programming point.
Fully configurable functionality including room joining, sequencing and programmable logic functions.
Flash memory for future proof upgradeability.
Variable fade times programmable from 0.1 seconds to 60 minutes per button.
Dimensions: 86mm (h) x 86mm (w).
Compatible with both standard UK back box (35mm) and European back box (40mm).
12Vdc powered direct from iLight network.
Any button can be configured to one of the following:
•
•
•
•
•
•
•
•
•
Scene selection.
16 Sequences with up to 128 steps per sequence.
Scene Raise / Lower.
Channel Raise / Lower.
Toggle On / Off, toggle Raise / Lower.
True off.
Open / Stop / Close (for curtains & blinds).
Raise / Lower (motorised screens/blinds)
Start / Pause / Stop a sequence.
Choice of button sizes
8 eaton Corporation eaton's Cooper Controls Group
Custom Backlit Button Engraving Examples
Kensington
Kensington control panels are designed for discretion and simplicity with panels featuring white LEDs and contemporary looks. Panels are available in a range of high quality metal finishes including, Brushed Stainless Steel, Bright Chrome, Polished Brass and White with other finishes available on special order.
Kensington control panels stand just 4mm off the wall for a sleek, elegant and modern look.
Choose between 2, 5, 7 and 9 standard button configurations with or without Infra-red control. All plates fit a 35mm deep UK single gang back box and have a screw less fixing.
•
•
•
•
•
•
•
•
Key Features
• Up to 10 configurable push buttons with integral LED indicators on a single gang panel.
Integral RJ12 programming point.
Optional IR remote control receiver (not available with 10 button panels).
Fully configurable functionality including room joining, sequencing and programmable logic functions.
Flash memory for future proof upgradeability.
Variable fade times programmable from 0.1 seconds to 60 minutes per button.
Dimensions: 86mm (h) x 86mm (w).
Fits standard 35mm deep UK back box.
12Vdc powered direct from iLight network.
Any button can be configured to one of the following:
•
•
•
•
•
•
•
•
•
•
Scene selection.
16 Sequences with up to 128 steps per sequence.
Scene Raise / Lower.
Channel Raise / Lower.
Toggle On / Off, toggle Raise / Lower.
True off.
Open / Close (for curtains & blinds).
Raise / Lower (motorised screens/blinds)
Program (to record a scene locally).
Start / Pause / Stop a sequence.
Custom Button Engraving Examples
Optional panel engraving iLight Series - product Catalogue 9
User Interfaces
Classic
10 eaton Corporation eaton's Cooper Controls Group
Classic control panels are supplied with a choice of Wandsworth
Series 2 or Series 3 face plates in different finishes and configurations and with integral blue LED indicators.
Classic control panels are modular in design and are therefore completely flexible. Hardware provision allows any single gang panel to have up to 10 buttons (A double gang version is available with up to 20 buttons). This means that if control requirements of an installation change during its lifetime, buttons may be easily added or removed. All that is required is a new faceplate to match the new button configuration and a reprogram of the control panel functionality.
Key Features
•
•
•
•
•
•
•
•
•
•
•
Screw type (Series 2) or Screwless (Series 3) fixing.
Up to 10 configurable buttons with integral LED indicators on a single gang panel and up to 20 buttons on the double gang panel.
Integral RJ12 programming point.
Optional IR remote control receiver (not available with fully populated 10 or 20 button panels).
Fully configurable functionality including room joining, sequencing and programmable logic functions.
Keyswitch inputs.
Flash memory for future proof upgradeability.
Variable fade times programmable from 0.1 seconds to 60 minutes per button.
Dimensions: 86mm (h) x 86mm (w). Single Gang & 86mm (h) x
146mm (w) Double Gang.
Fits standard 35mm deep UK back box.
12Vdc powered direct from iLight network.
Any button can be configured to one of the following:
•
•
•
•
•
•
•
•
•
•
Scene selection.
16 Sequences with up to 128 steps per sequence.
Scene Raise / Lower.
Channel Raise / Lower.
Toggle On / Off, toggle Raise / Lower.
True off.
Open / Close (for curtains & blinds).
Raise / Lower (motorised screens/blinds).
Program (to record a scene locally).
Start / Pause / Stop a sequence.
Custom Button Engraving Examples
architrave
The slim and elegant Architrave range brings stylish control capability to any space.
With a screwless fixing and a choice of custom finishes the slim design is equally suited for unobtrusive placement or for use where space is limited.
Key Features
•
•
•
•
•
•
•
•
Available with 2, 5 or 7 push buttons with integral LED indicators.
Fully configurable functionality including room joining, sequencing and programmable logic functions.
Flash memory for future proof upgradeability.
Variable fade times programmable from 0.1 seconds to 60 minutes per button.
Optional Infra-red receiver (In place of button 7).
Dimensions: 90mm (h) x 42mm (w).
Uses iLight custom backbox (included).
12Vdc powered direct from iLight network.
Any button can be configured to one of the following:
•
•
•
•
•
•
•
•
•
•
Scene selection.
16 Sequences with up to 128 steps per sequence.
Scene Raise / Lower.
Channel Raise / Lower.
Toggle On / Off, toggle Raise / Lower.
True off.
Open / Close (for curtains & blinds).
Raise / Lower (motorised screens/blinds)
Program (to record a scene locally).
Start / Pause / Stop a sequence.
Custom Button Engraving Examples
iLight Series - product Catalogue 11
ineo
Ineo control panels are a versatile range of specification grade control panels that set new standards in intuitive layout and operation. Users are quickly drawn to the large on/off button controls with associated up/down adjustments. Panels may be ordered engraved in up to 10 standard layouts. There is even a choice of button size and colour.
Ineo control panels can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.
Ineo is the clean, elegant, and simple way to control lighting on your project.
Key Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Available in Black, White & Ivory finishes.
10 standard panel layouts.
Each button individually configurable via iCANsoft.
Variable fade times programmable from 0.1 seconds to 60 minutes per button.
Built-in infrared receiver with learnable remote codes.
Flash memory for future proof upgradeability.
Buttons include Scene, Raise, Lower, On, Off functionality.
12Vdc powered direct from iLight network.
16 Sequences with up to 128 steps per sequence.
Choice of large or small button caps.
Standard or custom engraving on buttons.
Tap on/off feature to override fade time.
All plastic construction with a separate snap-on surround.
Dimensions: 121mm (h) x 83mm (w).
Requires NEMA (US Style) backbox 77mm (h) x 51mm (w) x
64mm (d). Order separately.
Choice of button sizes
12 eaton Corporation eaton's Cooper Controls Group
Custom Button Engraving Examples
revio
Revio controls panels are highly intuitive touch control user interfaces that provide advanced lighting control in a hightech design. This control eliminates end user confusion by combining an easily identifiable power button with a light icon at the centre of a rotary control, with up to 8 touch sensitive buttons under a customisable descriptive insert. While traditional rotary dimmers control just one area of lights, the
Revio rotary dimmer controls multiple groups of lights either individually or together.
The Revio low level backlit displays behind each touchpad complete the design and make it easy to select the right lighting even when entering the space when dark.
Key Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8 touch sensitive switches with legends individually backlit with the selected scene brightly lit.
Audible feedback when a switch is activated.
Rotary control provides raise / lower function.
Variable fade times programmable from 0.1 seconds to 60 minutes per button.
Built-in infrared receiver with learnable remote codes.
Flash memory for future proof upgradeability.
16 Sequences with up to 128 steps per sequence.
Labelling, color, style, language and logos completely customisable.
12Vdc powered direct from iLight network.
Tap on/off feature to override fade time.
Liquid glass style polycarbonate cover ensuring UV protection, longevity of colour/graphics, and an easily cleanable surface.
'Clean' switch, when pressed , allows the control panel to be wiped clean without changing light levels.
Dimensions: 123mm (h) x 70mm (w).
Requires NEMA (US Style) backbox: 77 (h) x 51 (w) x 64mm (d).
Order separately.
Custom Printed Inserts
touch Sensitive Buttons
Revio's printed inserts are capable of describing the unique zone or scene configurations of any project. The insert is covered in UV-protected, clear plastic providing longevity of graphics and a surface that can be wiped clean. From subtle tones to match interior decoration to personalised themes.
iLight Series - product Catalogue 13
User Interfaces
Colour touchscreens
The LCD colour touchscreens offer the ultimate solution in flexible, intuitive and user friendly interfacing to the lighting control system and for controlling linked systems. They offer a manageable solution to control a wide range of functions in an individual location or as a central control for multiple areas.
Building plans, photos and 3D graphics can all be used to customise the display to meet individual tastes and themes.
The touchscreens can also be used to provide control of other integrated systems such as audio visual, curtains, blinds and heating systems.
The PC Control Solution allows iLight graphic control of any size screen - Ideal for control rooms or where a big impact is needed.
3.5" Screen
5.7" Screen pC Control - any Screen Size
Key features
•
•
•
•
•
•
•
•
•
•
•
•
TFT LCD screen with analogue touch overlay.
1/4 VGA 320 x 240 pixel resolution.
65000 Colours available.
Selection of Bezel finishes with screwless fixing.
Supplied with basic configuration installed.
Standard buttons and backgrounds supplied with configuration software.
All graphics and buttons can be customised.
Programmable backlight level to automatically reduce screen brightness to a non-intrusive level after time out period.
Password feature to allow different access levels.
Large memory allows for up to 250 pages depending on graphics used.
3.5" Touchscreen
Dimensions: 86mm (h) x
146mm (w) - Fits standard
UK double gang backbox.
5.7" Touchscreen
Dimensions: 169mm (h) x
220mm (w)
Used with custom backbox
(Supplied).
Functionality
•
•
•
•
•
•
•
Available in 3.5” (TSC30) or 5.7” (TSC50) screen formats.
Can control an entire building or the adjacent area.
Full graphical 'tell back' control of each and every circuit.
Full scene set programming functions with “PIN” security options which allows the user to adjust preset levels on lighting scenes.
Ability to input customers' graphics and building plans to provide a bespoke interface.
Easy to use iCANsoft software for programming via built-in USB port.
White powder coat or
Stainless Steel finishes as standard. Many other finishes available on special order.
14 eaton Corporation eaton's Cooper Controls Group
Smartphone & tablet apps
•
•
•
•
•
Residential Applications include:
Private Homes
Apartments
Home Cinemas
Hotel Suites
Smarthomes
Ideal for extending existing mobile devices to control lighting.
•
•
•
•
•
Commercial Applications include:
Meeting Rooms
Hotel Ball Rooms
Board Rooms
Lecture Theatres
Leisure and Restaurant Chains
Ideal hand held device for maintenance or operational adjustment not requiring a service engineer.
iLight mobile applications for iPhone®, iPod touch®, iPad® and Android now bring fast and intuitive control of a complete lighting system to a hand held device. Navigate floors and rooms to choose, adjust and save lighting scenes with simple touch control operation.
Mobile applications must be used in conjunction with iLight
EG2 and EG2-NA Ethernet Gateway devices for network access.
At turn on, the network will recognise each mobile device and auto populate with the latest layout, scene and level settings for immediate use. Networks require initial commissioning and setup.
Installations may support multiple devices and varying security levels permitting only authorised user to make alterations.
Screen views can be personalised with custom background images via the mobile device. Area, room and floor labels may be individually tailored for the installation at setup.
Application includes demo program to preview and learn operational capabilities prior to commissioning.
•
•
•
•
Key features
•
•
•
•
Mobile user interface for controlling iLight lighting network.
Bi-directional control and feedback.
Supports multiple iOS or Android devices on same network.
Automatically loads room and scene information when connected.
Selective password protection.
Adjust and save changes.
Customisable background images.
Intuitive fader and switch icons.
http://www.apple.com/itunes https://play.google.com/store/apps iLight Series - product Catalogue 15
Control Panel Styles, Finishes & Configurations
Sencia panel Configuration examples
SSR-12SB-BS-
CUSTOM
12 button panel with brushed stainless steel finish.
SRR-5SB-RL-
PC
4 scenes, off, raise and lower panel in polished chrome
Finish Codes
PB Polished Brass
SB Satin Brass*
BS Brushed Stainless Steel
SRR-12SB-PC-
CUSTOM
12 button custom panel with raise and lower function.
SSR-4LB-BS-
CUSTOM
4 large button
'Front Door' style panel.
BC Bright Chrome
BB Brushed Antique Brass*
SRR-5SB-
3MB-RL-BB
4 scene, off, raise, lower and blind control.
SSR-6SB-W
5 scene and off, standard scene control panel in white finish.
BK Black Nickel*
B Black*
W White
Kensington panel Configuration examples
XSR093IBS
9 button panel with infra-red and brushed stainless steel finish.
XRP073-AB
7 button panel with antique brass finish.
Finish Codes
PB Polished Brass
SB Satin Brass*
XSR023-BS
2 button panel with brushed stainless steel finish.
XRP073-BS
7 button panel with polished brass finish.
XRP073-W
7 button panel with white finish.
XSR053-BC
5 button panel with bright chrome finish.
BS Brushed Stainless Steel
BC Bright Chrome
BB Brushed Antique Brass*
BK Black Nickel*
B Black*
W White
architrave Configuration examples
ARP073-SS
ASR053-SS
Screwless type 7 & 5 button panels in satin stainless steel
.
Finish Codes
the architrave Series are available in Satin Stainless as standard.
Custom finishes are available by Special order
Many of which are similar to the finishes available for the Classic range.
16 eaton Corporation eaton's Cooper Controls Group
Classic panel Configuration examples
Finish Codes
PB Polished Brass
PD Polished Desert Brass*
AB Antique Bronze*
BN Bright Nickel*
SS Satin Stainless Steel SN Satin Nickel*
QZ Quartz*
MS Mirror Stainless Steel
SL Satin Silver* DG Desert Gold*
LB Light Bronze*
AR Antique Brass*
AC Antique Copper*
AS Antique Silver*
SD Satin Desert Brass*
MB Matt Black*
W White
CW Cream White*
* these finishes are special order and can take a longer lead time.
Classic panels are also available in an etched primer finish ready to be colour matched to a particular raL colour.
CSR023-SD
2 button Series
3 panel with satin desert brass finish.
CSR053-MS
5 button panel with mirror stainless steel finish. (Custom engraving)
CRP043-SS
4 button Series
3 panel with satin stainless steel finish.
CRP073-PB
7 button Series
3 panel with polished brass finish.
CSR023-AB
2 button Series
3 panel with antique bronze finish.
(Custom layout)
CSR053-AR
5 button Series
3 panel with antique brass finish.
CRP073-W
7 button Series
3 panel with a white finish.
(Custom white buttons)
CSR092IPB
9 button Series
2 panel with
IR receiver and polished brass finish.
ineo Configuration examples
Finish Codes
B Black IV Ivory
W White
revio Configuration examples
Finish Codes
B Black
W White
IV Ivory
G Grey
CSR053-KMS
5 button double gang panel with key switch function.
(Custom engraving).
TSC30-W
Mini Colour Touchscreen with white surround.
CLS-2LB-RL-B-IR
Ineo control panel,
2 big buttons, raise/ lower, on/off and integral IR in a black finish.
CLS-4SB-RL-W-IR
Ineo control panel,
4 small buttons, raise/lower, on/off and integral IR in a white finish.
CLV-44Z-RL-G-IR
Revio Wallstation,
4 buttons + 4 zones and integral
IR in a grey finish.
CLV-44Z-RL-B-IR
Revio Wallstation,
4 buttons + 4 zones and integral
IR in a grey finish.
iLight Series - product Catalogue 17
Network overview
one network - fully scaleable
The iLight network has been designed to offer total freedom and flexibility in system design.
The iLight network features distributed data processing and is truly scaleable from 2 to 65,000 devices. There are virtually no limits as to what can be added to the system and with no central memory, components can easily be added or removed as required without major redesign.
The extensive iLight product range includes source controllers, interfaces and accessories that provide control solutions across residential, commercial and entertainment style projects. All common communications protocols are catered for, ensuring that the iLight system seamlessly integrates with other control components within an installation.
The network utilises standard widely available network cable eg. Belden 1502R.
Connectivity
The iLight system provides connectivity to the following protocols;
• DSI
• DALI
• 1-10V
• CAN
• RS232
• RS485
• DMX512
• KNX via KNX Gateways
• Ethernet
• BACnet
SeCUritY
SYSteM
Fire
SYSteM rS485
SCi1205 inductive
Source Controller
SCLeD1205
Mains LeD
Source Controller
Bn-2 network Bridge node
SCS2110
Switching
Source Controller
Bn-2 network Bridge node
SCMH0410
HF Controller
SCMD6400
DaLi Controller
SCMa0402 adaptive Source Controller tC-1 time Clock
UiM
Universal interface third party
Light Switch network Sensor
18 eaton Corporation eaton's Cooper Controls Group
SCH1210
HF
Source Controller
SCD96
DMX
Source Controller
HH17ir remote Control ri-2 relay interface
CUrtain /
BLinD
ControL
Si-2
System integrator node rS232 aV SYSteMS
SCreenS, proJeCtorS,
BMS
UiG
Universal interface rooM
Join
Mini Colour touchscreen
SCMi0402 inductive Controller
SCMC0410
Change over relay
& HF Controller
SCMr0816 relay Controller
SCMS0410
Switching Controller
SCMS0810
Switching Controller
MpM2400
Master Controller
MpM2400
Master Controller
Control panel
Control panel
Link to energy
Management
System
UiS
Sensor interface third party
Sensors remote pC eG-2 ethernet Gateway
Local pC
WWW
WiFi router
Laptop /
Wireless Device example project riser Drawing iLight Series - product Catalogue 19
Software
iCansoft - programming Software
iCANsoft is the iLight application software. It allows users to set up, configure, programme and monitor the iLight system. It’s intuitive, wizard based format has been especially designed to provide simple, easy to follow on screen help functions that guide system integrators, electrical contractors and end users through the programming process.
Monitoring - Network Monitor
iCANsoft’s monitoring options are an invaluable tool for larger iLight systems. They provide maintenance staff and commissioning engineers with a comprehensive diagnostics package for managing the system.
Programming – Network Explorer
This view provides a physical view of the network and all devices connected to it. Intuitive wizards allow quick and easy set up of the iLight system. Components can be added easily via drop down menus or drag and drop. It is also possible to name and configure the devices.
Configuring – Area Explorer
Area Explorer is the virtual view of the network. In this view it is possible to create up to 255 areas within a single network segment. In a hotel for example these areas might include the lobby, reception, ballroom, and the restaurant. Using iCANsoft you can name these areas logically so they are easy to identify and program.
Monitoring - iCANview
The addition of an iCANview Floorplan or Scene Control software enhancement package enables a graphic layout view or operation of an installation with full interaction with iCANsoft. Requires external PC and additional commissioning.
Touchscreen Editor
iCANsoft also provides a dedicated Touchscreen Editor package to help create stunning bespoke touch screens in the minimum of time. Templates allow you to configure and programme the number and action of the buttons on the screen whilst an ever increasing number of design styles allow totally unique graphics to be created.
20 eaton Corporation eaton's Cooper Controls Group
Source Controllers
internal view of an iLight Source Controller
iLight source controllers are mechanically elegant, safe and practical to use.
The iLight range of convection cooled source controllers may be configured for a wide variety of breaker and load types making them one of the most versatile and flexible control solutions on the market today.
A wealth of detailed features such as lockable hinged doors and top and bottom cable access make these units suitable for installation in almost any location, contractor friendly and convenient to live with.
Earth fixing point
Main PCB
Variations
Inductive Source Controllers
Dim resistive, inductive and low voltage electronic transformer loads (that are compatible with leading edge dimmers).
Adaptive Source Controllers
Controller outputs can be adapted to resistive, inductive and capacitive load types. Very quiet operation.
Complete with iProtect lamp protection and auto short circuit protection. Channels may be selected for leading and trailing edge operation.
LED Source Controllers
Dim resistive, inductive and electronic loads (leading and trailing edge). Very quiet operation. Complete with iProtect lamp protection and auto short circuit protection.
Combined Controllers
Cost effective combined controller for inductive,
HF ballast and switched loads.
Suitable for AV applications.
4 circuits of inductive, 4 circuits of 1-10V, DSI and DALI ballast control and 4 relays for power switching of non-dim loads.
HF Ballast Source Controllers
Suitable for 1-10 volt analogue,
Tridonic DSI or DALI control configurable from iCANsoft.
230V switched relay outputs.
Switched Relay Controllers
Switching of resistive, inductive or capacitive lighting loads.
Quiet operation.
Load terminals
Mains voltage cable entry/exit
Lockable point for MCB cover CPU card
Main
Isolator
MCBs
Lockable hinged cover iLight Series - product Catalogue 21
Source Controllers
Product
Code
SCMH0410
SCH0410
SCH1210
SCH1220
SCD24
SCD96
SCMS0410
SCMS0810
SCMC0410
SCMR0816
SCS0410
SCS1210
SCS0420
SCS1220
SCLED0405
SCLED1205
SCMI0402
SCI0405
SCI1205
SCI0110
SCI0410
SCI1210
SCI0420
SCI1220
SCI0805
SCMA0402
SCA0410
SCA1210
SCH1200T
SCMD6400T
Mains Load
Dimming / Switching Technology
Wall Mount or DINrail
Supply
Capability
Number of
Channels
Leading or Trailing Edge
Leading or Trailing Edge
Leading Edge
Leading Edge
Leading Edge
Leading Edge
Leading Edge
Leading Edge
Leading Edge
Leading Edge
Leading Edge, 1-10V, DSI, Broadcast DALI
Leading or Trailing Edge
Leading or Trailing Edge
Leading or Trailing Edge
1-10V, DSI, Broadcast DALI
Fully Addressable DALI
1-10V, DSI, Broadcast DALI
1-10V, DSI, Broadcast DALI
1-10V, DSI, Broadcast DALI
1-10V, DSI, Broadcast DALI
DMX
DMX, Change-Over Relay
Switched Relay
Switched Relay
Change-Over Relay, 1-10V, DSI, Broadcast DALI
Feed-Through Relay
Switched Relay
Switched Relay
Switched Relay
Switched Relay
D
D
W
W
W
W
D
D
W
W
D
W
W
W
W
W
W
D
W
W
W
D
W
W
W
W
W
W
W
D
4
8
4
12
4
12
4
8
24
96
4
4
12
12
4
12
12
64
8
4
4
12
1
4
4
12
12
4
12
4
SP
SP
SP
SP
***
SP
SP or TP
N/A
N/A
SP
SP
SP or TP
SP or TP
SP
SP
SP
SP
SP
SP
SP
SP or TP
SP
SP or TP
SP
***
***
SP
SP or TP
SP
SP or TP
Amps per
Channel
Silent
Dimming
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
10
16
10
10
20
20
N/A
N/A
10
10
10
10
10
20
10
10
N/A
N/A
5
2
20
20
5
5
10
10
10
5
5
2*
Minimum
Load
Key: W
- Wall Mounted,
D
- Dinrail mounted,
SP
- Single phase,
TP
- three phase,
Y
- Yes,
N
- no,
*
- Max amps per device = 6a,
**
- no power switching for analogue ballasts,
***
- Feed through, channels can be different phases
LE
- Leading edge,
TE
- trailing edge,
S
- Switching only.
Note:
always refer to lamp manufacturer's instructions for Le or te dimming capability.
•
•
•
•
•
•
•
•
Source Controller Key features
•
•
•
Choice of loads for high frequency ballasts, resistive, inductive, capacitive and switched loads.
Choice of 1, 4, 8 or 12 channel units to match size of installation required.
Low noise for standard dimmers or silent operation for adaptive dimmers.
128 Scene memory and fully configurable personality.
Fade rates of 0.1 to 60 minutes per scene.
rJ12 programming point.
iLight network port with loop in, loop out terminals for network cable.
audio Visual (rS485) port.
optional DMX input.
auxiliary over-ride port.
Ce compliant.
22 eaton Corporation eaton's Cooper Controls Group
S
S
S
S
S
S
/
S
/
S
S
S
S
/
S
Le
Le
Le
Le
Le, te
Le, te
/
Le, te
Le
Le
Le
Le
Le, te
Le, te
Le
Incandescent Mains
(Retrofit)
LED
Fluorescent Dimmable
Compact
Fluorescent
Cold
Cathode
S
S
S
S
S
S
/
S
/
S
S
S
S
/
S
Le
Le
Le
Le
Le, te
Le, te
/
Le, te
Le
Le
Le
Le
Le, te
Le, te
Le addressable DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
/
S
/
1-10, DSi, DaLi
S
S
S
S
S
S
S, 1-10, DSi, DaLi
Le
Le
Le
Le
Le, te
Le, te
Le
Le
Le
Le
Le
Le, te
Le, te
Le, te
1-10**, DSi, DaLi addressable DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
/
S
/
1-10, DSi, DaLi
S
S
S
S
S
S
S, 1-10, DSi, DaLi
/
/
/
/
/
/
/
/
/
/
1-10, DSi, DaLi
/
/
/
1-10**, DSi, DaLi addressable DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
/
S
/
1-10, DSi, DaLi
S
S
S
S
S
S
S, 1-10, DSi, DaLi
Le
Le
Le
Le
Le, te
Le, te
Le
Le
Le
Le
Le
Le, te
Le, te
Le, te
1-10**, DSi, DaLi
S
S
S
S
S
S
/
S
/
S
S
S
S
/
S
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
Discharge
(Metal
Halide)
Electronic
Low Voltage
Transformers
Magnetic
Low Voltage
Transformers
LED
Driver
S
S
S
S
S
S
/
S
/
S
S
S
S
/
S
Le
Le
Le
Le
Le, te
Le, te
/
Le, te
Le
Le
Le
Le
Le, te
Le, te
Le
S
S
S
S
S
S
/
S
/
S
S
S
S
/
S
/
/
/
/
Le
Le
Le
Le
Le
Le
Le
Le
/
/
Le addressable DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
1-10, DSi, DaLi
/
S
/
1-10, DSi, DaLi
S
S
S
S
S
S
S, 1-10, DSi, DaLi
Le
Le
Le
Le
Le, te
Le, te
Le
Le
Le
Le
Le
Le, te
Le, te
Le, te
1-10**, DSi, DaLi
•
•
•
•
•
Electronic
•
•
Circuit and device protection from a choice of MCB styles to comply with most regulatory standards
(single pole, double pole, neutral disconnect, rCBo or terminals).Voltage and current (real-time) monitoring and shut-down (trailing edge & adaptive only).
patented iprotect system to protect lamps and devices from excessive in-rush current and short circuit conditions
(trailing edge & adaptive only).
emergency lighting terminals.
LeD status indication of channel status levels, iLight network watchdog and electronic bypass status.
Fail to full on for all units on CpU failure.
test switch and electronic bypass switch.
overheat protection.
Emergency Test
• iLight can also offer source controllers with inbuilt contactors and timers designed to assist in the duration testing of integral battery emergency light fittings.
Mechanical
•
•
Lockable hinged cover over MCB’s to prevent unauthorised access to interior.
Standard knock-outs to accommodate UK and european conduit.
iLight Series - product Catalogue 23
Source Controllers - Wall Mounted
Leading or trailing edge Source Controllers - Suitable for Mains LeD dimming
SCLED0405S
SCLED0405N
SCLED0405D
SCLED0405RCBO
SCLED0405RCBOX
•
•
•
•
•
•
•
4 x 5 Amp combined leading edge & trailing edge source controller module
Suitable for 20 Amp single phase supply
No minimum load
Silent operation
MCB protection behind lockable hinged cover
Dimensions: 280x220x155mm
(D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm)
Weight: 4 Kg (RCBO & RCBOX - 4.5 Kg)
Not suitable for magnetic loads. Input isolator only included on RCBO and RCBOX versions
SCLED1205S
SCLED1205N
SCLED1205D
SCLED1205RCBO
SCLED1205RCBOX
•
•
•
•
•
•
•
•
12 x 5 Amp combined leading edge & trailing edge source controller module
Suitable for 40 Amp single phase supply
No minimum load
Silent operation
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions: 550x220x155mm
(D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm)
Weight: 10 Kg (RCBO & RCBOX - 11.5 Kg)
Not suitable for magnetic loads.
Leading edge Source Controllers
SCI0405S
SCI0405N
SCI0405D
SCI0405RCBO
SCI0405RCBOX
•
•
•
•
•
4 x 5 Amp inductive source controller module
Suitable for 20 Amp single phase supply
MCB protection behind lockable hinged cover
Dimensions: 280x220x155mm
(D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm)
Weight: 4 Kg (RCBO & RCBOX - 4.5 Kg)
Input isolator only included on RCBO and RCBOX versions
SCI1205S
SCI1205N
SCI1205D
SCI1205RCBO
SCI1205RCBOX
•
•
•
•
•
•
12 x 5 Amp inductive source controller module
Suitable for 40 Amp single phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions: 550x220x155mm
(D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm)
Weight: 10 Kg (RCBO & RCBOX - 11.5 Kg)
SCI0110T
24 eaton Corporation eaton's Cooper Controls Group
•
•
•
1 x 10 Amp inductive source controller module
Suitable for 10 Amp single phase supply
Dimensions: 240x220x90mm
• Weight: 2.5 Kg
Breaker and Input isolator not included
S
- Single Pole,
N
- Neutral Disconnect,
D
- Double Pole,
T
- Terminals,
RCBO
- RCBO Breakers,
RCBOX
- Field fitting of RCBOs
Leading edge Source Controllers - continued
•
•
•
4 x 10 Amp inductive source controller module
Suitable for 40 Amp single phase supply
MCB protection behind lockable hinged cover
•
•
Dimensions: 400x220x155mm
Weight: 7 Kg (D, RCBO & RCBOX - 8 Kg)
Input isolator only included on RCBO and RCBOX versions
SCI0410S
SCI0410N
SCI0410D
SCI0410RCBO
SCI0410RCBOX
•
•
•
•
•
•
12 x 10 Amp inductive source controller module
Suitable for 40 Amp 3 phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions: 850x330x155mm
(RCBO & RCBOX - 850x374x155mm)
Weight: 18 Kg (D, RCBO, RCBOX - 19.5 Kg)
SCI1210S
SCI1210N
SCI1210D
SCI1210RCBO
SCI1210RCBOX
•
•
•
•
4 x 20 Amp inductive source controller module
Suitable for 80 Amp single phase supply
MCB protection behind lockable hinged cover
Dimensions: 375x330x155mm
(D - 450x330x155mm. RCBO & RCBOX - Consult iLight)
• Weight: 9 Kg (SCI0420D - 12 Kg)
Input isolator only included on RCBO and RCBOX versions
SCI0420S
SCI0420N
SCI0420D
SCI0420RCBO
SCI0420RCBOX
•
•
•
•
•
•
12 x 20 Amp inductive source controller module
Suitable for 80 Amp 3 phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions 850x330x155mm
(RCBO & RCBOX - 850x374x155mm)
Weight 22 Kg (SCI1220D - 23.5 Kg)
SCI1220S
SCI1220N
SCI1220D
SCI1220RCBO
SCI1220RCBOX
Combined Leading edge, 1-10V, DSi, Broadcast DaLi Source Controller
•
•
•
•
8 x 5 Amp combined source controller, 40 Amp single phase supply
4 circuits of inductive leading edge, 4 circuits of 1-10V, DSI and
DALI ballast control and 4 relays for power switching of non-dim loads.
Dimensions 400x220x155mm
(RCBO & RCBOX - 440x255x155mm)
Weight: 7 Kg (RCBO & RCBOX - 8 Kg)
Which product to use? - refer to the product selector, Page 22-23
SCI0805T
SCI0805S
SCI0805N
SCI0805RCBO
SCI0805RCBOX
iLight Series - product Catalogue 25
Source Controllers - Wall Mounted
adaptive Leading or trailing edge Source Controllers
SCA0410S
SCA0410N
SCA0410D
SCA0410RCBO
SCA0410RCBOX
•
•
•
•
4 x 10 Amp adaptive source controller module
Suitable for 40 Amp single phase supply
MCB protection behind lockable hinged cover
Dimensions: 375x330x155mm (RCBO & RCBOX - Consult iLight)
• Weight: 9 Kg (SCA0410D - 10 Kg)
Input isolator not included
SCA1210S
SCA1210N
SCA1210D
SCA1210RCBO
SCA1210RCBOX
•
•
•
•
12 x 10 Amp adaptive source controller module
Suitable for 40 Amp 3 phase supply
MCB protection behind lockable hinged cover
Dimensions: 850x330x155mm (RCBO & RCBOX - Consult iLight)
• Weight: 18 Kg (SCA1210D - 19.5 Kg)
Input isolator not included
1-10V, DSi, Broadcast DaLi Source Controllers
SCH1200T
•
•
•
12 Channel 1-10V/DSI/ Broadcast DALI ballast controller.
(Control only, no power switching)
Dimensions: 240x220x90mm
Weight: 3 Kg
SCH0410S
SCH0410N
SCH0410D
SCH0410RCBO
SCH0410RCBOX
•
•
•
•
•
•
4 x 10 Amp HF ballast controller module
1-10V, DSI or Broadcast DALI control
Suitable for 40 Amp single phase supply
MCB protection behind lockable hinged cover
Dimensions: 280x220x155mm
(D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm)
Weight: 4 Kg (D, RCBO & RCBOX - 5 Kg)
Input isolator only included on RCBO and RCBOX versions
SCH1210S
SCH1210N
SCH1210D
SCH1210RCBO
SCH1210RCBOX
26 eaton Corporation eaton's Cooper Controls Group
•
•
•
•
•
•
•
12 x 10 Amp HF ballast controller module
1-10V, DSI or Broadcast DALI control
Suitable for 40 Amp 3 phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions: 550x220x155mm
(D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm)
Weight: 9 Kg (D, RCBO & RCBOX - 10.5 Kg)
S
- Single Pole,
N
- Neutral Disconnect,
D
- Double Pole,
T
- Terminals,
RCBO
- RCBO Breakers,
RCBOX
- Field fitting of RCBOs
1-10V, DSi, Broadcast DaLi Source Controllers - continued
•
•
•
•
•
•
•
12 x 20 Amp HF ballast controller module
1-10V, DSI or Broadcast DALI control
Suitable for 80 Amp 3 phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions: 550x220x155mm
(D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm)
Weight: 9 Kg (D, RCBO & RCBOX - 10.5 Kg)
Switched relay Controllers
•
•
•
•
4 x 10 Amp switched relay source controller module
Suitable for 40 Amp single phase supply
MCB protection behind lockable hinged cover
Dimensions: 280x220x155mm
•
(D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm)
Weight: 4 Kg (D, RCBO & RCBOX - 5 Kg)
Input isolator only included on RCBO and RCBOX versions
SCH1220S
SCH1220N
SCH1220D
SCH1220RCBO
SCH1220RCBOX
SCS0410S
SCS0410N
SCS0410D
SCS0410RCBO
SCS0410RCBOX
•
•
•
•
•
4 x 20 Amp switched relay source controller module
Suitable for 80 Amp single phase supply
MCB protection behind lockable hinged cover
Dimensions: 280x220x155mm
(D - 400x220x155mm. RCBO & RCBOX - 340x255x155mm)
Weight: 4 Kg (D, RCBO & RCBOX - 5 Kg)
Input isolator only included on RCBO and RCBOX versions
SCS0420S
SCS0420N
SCS0420D
SCS0420RCBO
SCS0420RCBOX
•
•
•
•
•
•
12 x 10 Amp switched relay source controller module
Suitable for 40 Amp 3 phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions: 550x220x155mm
(D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm)
Weight: 9 Kg (D, RCBO & RCBOX - 10.5 Kg)
•
•
•
•
•
•
12 x 20 Amp switched relay source controller module
Suitable for 80 Amp 3 phase supply
MCB protection behind lockable hinged cover
Input isolator included (except 'D' version)
Dimensions 550x220x155mm
(D - 690x220x155mm. RCBO & RCBOX - 550x255x155mm)
Weight: 9 Kg (D, RCBO & RCBOX - 10.5 Kg)
Which product to use? - refer to the product selector, Page 22-23
SCS1210S
SCS1210N
SCS1210D
SCS1210RCBO
SCS1210RCBOX
SCS1220S
SCS1220N
SCS1220D
SCS1220RCBO
SCS1220RCBOX
iLight Series - product Catalogue 27
Source Controllers - DINrail Mounted
Dinrail range
an alternative to the iLight Cabinet Source Controller system is the Dinrail mounted system. the Dinrail range offers the same scope of control capability as our other products but is designed specifically for the panel building market. all of the key components are Din rail mounting enabling installers and integrators to construct their own systems to suit particular projects.
iLight DINrail systems are both powerful and flexible. They can be fully integrated with other iLight devices on the iLight network.
MPM2400 Master Controller, SCMA0402 Adaptive Dimmer and
SCMD6400 Addressable DALI Controller sit directly on the iCAN network. These devices have the same processing capability as the iCAN source controllers and feature;
•
•
•
•
128 scene memory
Fade times from 0.1 seconds to 60 minutes
An auxiliary connection for the selection of any scene (e.g an emergency lighting state)
LED status indicators
The MPM unit is complemented by a range of low cost power modules which can be used in various combinations. The MPM connects to the modules via short serial link cables (included).
Modules include a choice of a 4-circuit leading edge controller
(SCMI), an HF ballast controller for 1-10 volt/DSI (SCMH), 4 & 8 channel power relay units (SCMS & SCMR) as well as curtain and blind control (SCMC).
All of the DINrail devices can be used with the full range of user interfaces and peripherals that are available with the iLight system detailed earlier in this brochure.
Consult iLight for complete packages ready built, tested and mounted in Din cabinets.
Dinrail range - Stand alone
no master required
SCMA0402
•
•
•
•
4 x 2 Amp adaptive leading or trailing edge source controller
Max total load 10A
Dimensions: 227x90x48 mm
Weight: 1 Kg
SCMD6400
no master required
28 eaton Corporation eaton's Cooper Controls Group
•
•
•
64 x Addressable DALI ballasts controller module, 16 groups
Dimensions: 160x90x58 mm
Weight: 1 Kg
Dinrail range - Master & output Modules
•
•
•
•
•
Master control of up to 48 channels of switching and dimming
Built in system power supply
Use with SCMI, SCMS, SCMH, SCMR & SCMC modules
Dimensions: 160x90x58 mm
Weight: 1 Kg
•
•
•
•
4 x 2 Amp inductive leading edge source controller
Max total load 5A
Dimensions: 160x90x58 mm
Weight: 1 Kg
•
•
•
•
4 x 10 Amp switching source controllers
Max total load 16A
Dimensions: 160x90x58 mm
Weight: 1 Kg
•
•
•
•
8 x 10 Amp switching source controllers
Max total load 16A
Dimensions: 160x90x58 mm
Weight: 1 Kg
•
•
•
•
•
4 x 10 Amp change over relay & HF controller
4 x Independent low voltage outputs
Max total load 40A
Dimensions: 160x90x58 mm
Weight: 1 Kg
•
•
•
•
•
8 x 16 Amp feed-through relay controller
Switches resistive, inductive and capacitive lighting loads
Max total load 128A
Dimensions: 160x90x58 mm
Weight: 1 Kg
•
•
•
•
•
4 x 10 Amp HF ballast controller
1-10V, DSI or DALI control output
Max total load 16A
Dimensions: 160x90x58 mm
Weight: 1 Kg
Which product to use? - refer to the product selector, Page 22-23
Master (MpM)
MPM2400
Connects to MpM
SCMI0402
Connects to MpM
SCMS0410
Connects to MpM
SCMS0810
Connects to MpM
SCMC0410
Connects to MpM
SCMR0816
Connects to MpM
SCMH0410
iLight Series - product Catalogue 29
Source Controllers
DMX Source Controllers
SCD24
SCD96
SCDServer
SCDServerPro
The SCD24 is a 24 channel DMX source controller. It is designed to provide scene set dimming output for any DMX512 controlled load.
•
•
•
•
24 channels.
128 scene memory
8 sequences with a maximum of 30 actions
Dimensions: 240 x 220 x 90 mm
• 2.5 Kg
•
•
•
•
The SCD96 is a 96 channel DMX source controller. It is designed to provide scene set dimming output for any DMX512 controlled load. The unit also incorporates 8 general purpose 3A change over relays which are DMX addressable as some of the 96 channel DMX outputs.
•
•
96 channels
8 x 3A general rating change over relays
128 scene memory
16 sequences with a maximum of 128 actions
Dimensions: 240 x 220 x 90 mm
2.5 Kg
The SCD Server is a 19" rack mounted, fully featured, DMX lighting control system ideal for use in larger performance installations and networks where show replay, tracking backup or standalone operation is required.
SCD Server has 1024 channels, the SCD Server Pro has 2048 channels
(upgradable to 4096)
• A stand alone or remotely controlled event replay controller for complex permanent installations such as facades, landscapes or
•
• theme parks.
A fully tracking Backup to any Zero 88 ZerOS lighting console
A bridge between a performance lighting system and an architectural lighting control network making it ideal for theatres, conference centres and other public building applications.
Interfaces
iLight manufactures a range of integration tools to assist with the construction and configuration of the iLight network and for interfacing with external system components.
System integrator node
SI2
•
•
•
•
•
•
•
The bi-directional System Integrator Node allows control of a wide range of RS232 compatible third party equipment through the iLight user interfaces including audio systems, TVs, projectors, blinds, curtains, heating and HVAC systems, security & fire alarms, surveillance and CCTV.
Configurable RS232 COMMS via 9 pin female D type (Send/Recieve)
Adjustable baud rates of 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200
1 x CAN bus data connection via screw terminals
Status LEDs
20 programmable serial commands - triggered from the iLight network
16 sequences each with a maximum of 128 actions
Dimensions: 124 x 49 x 23 mm
30 eaton Corporation eaton's Cooper Controls Group
Interfaces
ethernet Gateway
The Ethernet Gateway provides a connection between an iCAN network and an Ethernet LAN. This allows a user to control and configure the iLight system using iCANsoft on a LAN network
PC or via the internet rather than by connecting directly into the iLight network. Where a wireless LAN is in place (or by connecting a wireless router into the Ethernet Gateway) the user can access the network with a Wi-Fi enabled PC.
The Ethernet Gateway is also the host for the iLight series of remote applications including Android and iOS (iPhone®/ iPod touch®/ iPad®) and a webserver front end where applications are downloaded separately. Coupling the EG-2 to a WIFI network enables secure scene control, visual feedback and modification from your hand held device.
The Ethernet Gateway also facilitates connection to the internet when used with iCANsoft, a firewall, ISP and a Ethernet switch, this then enables remote connection for controlling, programming & obtaining diagnostics of the lighting control system.
•
•
•
•
•
•
•
•
Connects iLight CAN network to 10/100 Mbps Ethernet/LAN.
Configurable IP address.
Facilitates internet and Wi-Fi LAN connection into the iLight network.
Integral web server.
Time clock.
Supports iLight applications via mobile devices. Android and iOS (iPhone®/ iPod touch®/ iPad®)
Supports ASCII control strings.
16 Sequences, each with a maximum of 128 actions.
The Ethernet Gateway is available in two versions:
EG2
- Ethernet Gateway in DINrail enclosure (power supply and metal DINrail enclosure available to order separately).
•
•
Dimensions: 160x90x58 mm
1 Kg
EG2-NA
- Ethernet Gateway including power supply and steel enclosure.
•
•
Dimensions: 240 x 220 x 90 mm
2.5 Kg iLight mobile applications for Android and iOS (iPhone®, iPod touch®, iPad®) now bring fast and intuitive control of a complete lighting system to a hand held device. Navigate floors and rooms to choose, adjust and save lighting scenes with simple touch control operation.
At turn on, the network will recognise each mobile device and auto populate with the latest layout, scene and level settings for immediate use. Networks require initial commissioning and setup.
Installations may support multiple devices and varying security levels permitting only authorised user to make alterations.
Screen views can be personalised with custom background images via the mobile device. Area, room and floor labels may be individually tailored for the installation at setup.
Application includes demo program to preview and learn operational capabilities prior to commissioning. To view the EG2 demo video and download our free iOS and Android apps go to: www.ilight.co.uk/eg2
EG2
EG2-NA iOS &
Android
Apps
iLight Series - product Catalogue 31
Interfaces
relay interface
RI2
The Relay Interface provides a versatile interface between the iLight network and other control systems. The unit is fully configurable and may be programmed to perform switching functions for curtain or blind control, AV and presentation equipment or drive contactors for heavier power applications.
•
•
•
•
•
•
8 relay outputs
8 inputs - programmable as analogue or digital used for volt free switches or motion detectors
16 sequences each with a maximum of 128 actions
Audio Visual RS485 port, 2 alarm inputs
Dimensions: 240 x 220 x 90 mm
2.5 Kg
optional plugin DMX interface Board
DI1
Plugin interface board for DMX control input to any source controller
(When installed, RS485 port is no longer available for ASCII control using RS485).
Bridge
BN2
The BN-2 bridging module allows 2 or more iCAN network segments to be connected together or arranged logically into floors or areas for ease of management. The bridge is also used to extend the network as a repeater where longer network segments or large numbers of devices are required. BN-2 also allows network messages to be filtered to ensure optimal performance in larger networks.
•
•
•
•
•
Repeater where cable lengths exceed network limits
16 sequences each with a maximum of 128 actions
Programmable sequence capability
Message filtering and isolation for large networks
Dimensions: 124 x 49 x 23 mm
Starbox
STARBOX
32 eaton Corporation eaton's Cooper Controls Group
•
•
•
•
Star wire interface provides network branch capability by allowing all cables from the iLight network to be connected back to one central point.
The device enables an existing lighting control system in need of modernisation/updating to be successfully converted to an iLight lighting control system. Up to six network segments may be connected per box.
Six way segment split
Includes power supply
Dimensions: 240 x 220 x 90 mm
2.5 Kg
Sensor interface
The UIS features 3 sensor inputs for connecting analogue or third party sensors to the iLight lighting control network. Each sensor input is suitable for either a single occupancy detector or daylight sensor or a combined PIR, Photocell with built in infrared control.
Each UIS installed adds three independent daylight linking engines to the network making this unit ideal for maximising daylight harvesting across all areas.
•
•
•
•
•
•
•
•
•
•
This small compact device can be deployed anywhere on the iLight network and uses RJ12 sockets and cables for fast installation.
3 x connections for sensors to iCAN network
RJ12 type sockets for rapid sensor connection
3 independent daylight linking engines
Presence or absence detection support
Infra-red support for HH17IR remote controller
Supports Infra-red identification
16 Sequences, each with a maximum of 128 actions
Status LEDs
Message filtering and isolation for large networks
Dimensions: 124 x 49 x 23 mm
Universal interface
The UIG allows other items such as partition switches to provide inputs to the iLight network. When configured for a room join, moving the partition will open or close a magnetic proximity switch contact (not included) and automatically re-program the function of the control panels within the room.
•
•
•
•
•
4 x 0-10V analogue inputs for volt free switches or motion detectors
4 volt free contact closure inputs
4 switch outputs for LED indication
16 sequences each with a maximum of 128 actions
Fits standard UK style double gang 35mm deep back box
Mini UiG
The Mini UIG also allows other items to provide inputs to the iLight network and is often used with third party and custom faders and switches.
•
•
•
6 inputs which each can be individually configured as 0-10V analogue, digital or photoelectric cell inputs
8 sequences with up to 30 steps per sequence
Only 42mm Ø so easily fits in European and UK junction and back boxes
UIS
UIG2
UIM
iLight Series - product Catalogue 33
Accessories
In addition to interfacing tools, iLight also provide a number of accessories to further enhance the capability of the iLight control system.
astronomical time Clock
TC1
The TC-1 is a surface mounting electronic time clock with astronomical facility and LCD display. It connects to the iLight network and is fully programmable using either the front panel keyboard or iCANsoft™ PC based software for daily or date specific events.
•
•
•
•
255 events
8 sequences with up to 30 steps per sequence
Scene selection and programming
Channel level raise and lower
Low Voltage Sensors
NS-3
Network Sensor with Combined PIR, Daylight and Infrared Control
The NS3 multi sensor can be connected directly to the iLight Network via CAN terminals. It features 3 functions: PIR motion detection, daylight measurement and an infra-red receiver. All three functions may be programmed within the iLight software according to specific user needs.
This sensor features a movement detection coverage of up to 8.5m diameter depending on installation height with PIR detection optimised for
Slight Motion for superior performance.
PI1C
PE1C
Ceiling Mounted Motion Detector
Low voltage Passive Infrared Detector with open collector output, suitable for flush mounting to suspended ceilings, includes retaining clip. Detection range approx 5m from ceiling height 2.4m. May be used in groups to cover larger areas. On time duration after trigger fully programmable within iCANsoft. Interior use only.
May be used with UIM, UIG2 and UIS - See Page 33
Ceiling Mounted Photocell
Low voltage Photocell Detector, suitable for flush mounting to suspended ceilings, includes retaining clip. May be used as a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range at surface 0-1000 lux approx.
Positioned as look down detector. Interior use only.
May be used with UIM and UIS - See Page 33
PE1EXT
External Photocell
Low voltage exterior Photocell Detector, suitable for surface mounting.
May be used for a daylight switching threshold or continuous level output for control of functions programmable within iCANsoft. Daylight sensitivity range approx 0-10,000 lux IP54 rated.
May be used with UIM and UIS - See Page 33
AXCS01SRJ
34 eaton Corporation eaton's Cooper Controls Group
Combined PIR & Daylight Sensor with I/R Receiver
Low-voltage multisensor includes passive infrared detector with open collector output and photocell. Suitable for flush mounting to suspended ceilings. Includes retaining clip and RJ12 connection. Interior use only.
May be used with UIS - See Page 33
A range of custom sensor solutions are also available, consult iLight with your specific requirements.
ir transmitter
•
•
iLight hand held remote
• 8 scene buttons
• Off button
Raise and lower controls
6 additional configurable buttons
Software accessories
Software Kit
This kit allows engineers to connect their PC to the iLight system and configure the network using iCANsoft.
•
•
•
PC Node - Serial Port to iLight network interface
Includes a copy of iCANsoft on CD to allow the iLight network to be configured from a PC
Includes USB cable
Available for accredited dealers only
Also available is the PC node only for adding RS485 input to any iLight network
•
•
•
•
•
•
•
•
iCANview - Floorplan
This stand alone software is used for monitoring a lighting installation using a floor plan layout based on original customer supplied drawings.
Ideal for monitoring large or complex installations
Each system customised to your project
Navigate multiple floors
Selectable levels of detail
Virtual device control and feedback, including DALI reporting where applicable
Zoom & pan functions
Includes iCANview-Scene Control capabilities
Windows XP, Vista, 7 & 8
•
•
•
•
•
•
•
•
iCANview - Scene Control
This stand alone software is used for operating a lighting installation from a PC using graphic layouts based on original customer supplied images.
Simple intuitive operation - ideal for general staff
Clear navigation and labeling
Fast scene selection and replay by area
Adjustable fade times for scenes.
Customised visual presentation based on JPG or Bitmap images
Locked for users only
Each system customised to your project
Windows XP, Vista, 7 & 8
Photographs courtesy of the following:
Lighting Design International
Charles Marsden-Smedley
Intercontinental Hotels
The Atlantis Hotel, The Palm. Photographer: Paul Thuysbaert.
Radisson Hotels
Hilton Hotels
HH17IR
SW2 iCANview
Floorplan iCANview
Scene Control
iLight Series - product Catalogue 35
Eaton’s electrical business is a global leader with expertise in power distribution and circuit protection; backup power protection; control and automation; lighting and security; structural solutions and wiring devices; solutions for harsh and hazardous environments; and engineering services. Eaton is positioned through its global solutions to answer today’s most critical electrical power management challenges. solutions that help our customers effectively manage electrical, hydraulic and mechanical power. A global technology leader,
Eaton acquired Cooper Industries plc in November 2012. The
2012 revenue of the combined companies was $21.8 billion on a pro forma basis. Eaton has approximately 102,000 employees and sells products to customers in more than 175 countries. For more information, visit www.eaton.com.
DISTRIBUIDOR EXCLUSIVO EM PORTUGAL
R. Sá de Figueiredo 6 – C
2790-233 Carnaxide
Telef. (+351) 21 417 76 21 Fax. (+351) 21 030 00 31
Web: www.sislite.pt
- email: [email protected]
Eaton's Cooper Controls Group
20 Greenhill Crescent
Watford Business Park
Watford, Herts
WD18 8JA. UK
T: +44 (0)1923 495496
F: +44 (0)1923 228796
www.coopercontrol.com
Eaton Industries Manufacturing GmbH
Electrical Sector EMEA
Route de la Longeraie
71110 Morges, Switzerland
Eaton.eu
© Copyright 2014
Eatons Cooper Controls Group
All Rights Reserved
Stock Number: ILM05 Issue: 7.0
Changes to the products, to the information contained in this document, and to prices are reserved; so are errors and omissions.
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
An ISO 9001:2008 accredited company
Awarded to:
Cooper Industries (UK) Ltd
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project