Terratec NOXON WLAN Stick QSG Vista 7 EN NL Owner Manual

Add to my manuals
26 Pages

advertisement

Terratec NOXON WLAN Stick QSG Vista 7 EN NL Owner Manual | Manualzz

Quick Setup Guide

Windows 7

Installation der WLAN-Adapters unter Windows 7

Installing the WLAN adapter in Windows 7

Installation de la clé WLAN sous Windows 7

Installatie van de WLAN-adapter onder Windows 7

Inhalt

Installation der WLAN-Adapters unter Windows 7 ............................................................................3

Installing the WLAN adapter in Windows 7 .........................................................................................9

Installation de la clé WLAN sous WINDOWS 7 ................................................................................. 15

Installatie van de WLAN-adapter onder WINDOWS 7..................................................................... 21

2

Installation der WLAN-Adapters unter Windows 7

Legen Sie die mitgelieferte CD mit den erforderlichen Treibern in das DVD-Laufwerk. Ein

Requester öffnet sich und fragt, wie Sie fortfahren wollen. Wählen Sie -> Autorun.exe aufrufen

Klicken Sie anschließend auf die Sprache, in der das Setup ausgeführt werden soll.

3

Die CD läuft kurz an, um die Installation vorzubereiten.

Klicken Sie im folgenden Fenster auf -> Weiter

4

Wählen Sie -> Installieren, um mit der Installation zu beginnen.

Ein Balken zeigt den Fortschritt der Installation an. Warten Sie, bis er das Ende erreicht hat.

5

Ist die Installation abgeschlossen klicken Sie auf -> Ja, Computer jetzt neu starten.

Nachdem Ihr PC neu gestartet ist, stecken Sie den WLAN-Adapter in eine freie USB-Buchse Ihres Computers. Windows 7 erkennt den Adapter und installiert selbstständig noch einige Treiber - das dauert nur ein paar Sekunden.

6

Das Fenster zur Verbindungseinrichtung zwischen WLAN-Adapter und Router öffnet sich automatisch. Sollte das nicht der Fall sein, können Sie das auch selber mit einem Doppelklick auf das „Realtek 11n USB“ Icon erledigen. Klicken Sie in dem geöffneten Fenster auf den Reiter -> Verfügbares Netzwerk. (Sollte Ihr Router WPS unterstützen, so öffnen

Sie den Reiter -> WiFi-Protected Setup und verfahren wie dort angegeben)

Öffnen Sie mit einem Doppelklick das Netzwerk Ihrer Wahl und geben Sie anschließend - falls erforderlich - den Netzwerkschlüssel ein. Bestätigen Sie diesen und klicken Sie dann auf -> OK.

7

Im Fenster -> Allgemein (öffnet sich automatisch nach Eingabe des Schlüssels) können

Sie Verbindungsqualität und Signalstärke kontrollieren.

Die Installation ist abgeschlossen, der WLAN-Adapter ist betriebsbereit.

8

Installing the WLAN adapter in Windows 7

Place the provided CD with the required drivers into the DVD drive. A request dialogue opens and asks how you would like to proceed. Select -> Call up Autorun.exe

Then click the language in which the setup is to be carried out.

9

The CD runs briefly to prepare the installation.

In the following window click -> Next.

10

Select -> Install to begin the installation.

A bar shows the progress of the installation. Wait until it has reached the end.

11

When the installation is complete, click -> Yes, restart computer now.

After your computer has been restarted, plug the WLAN adapter into a free USB port of your computer. Windows 7 detects the adapter and independently installs some drivers— this takes only a couple of seconds.

12

The window for the connecting device between the WLAN adapter and router opens automatically. If it does not, you can also open it by double-clicking the „Realtek 11n USB“ icon. In the window that opens, click the -> Available network tab. (If your router supports WPS, open the -> WiFi-protected setup tab and proceed as specified there.)

Double-click to open the network of your choice and then—if necessary—enter the network key. Confirm this and then click -> OK.

13

In the -> General window (opens automatically after entering the key), you can check the connection quality and signal strength.

The installation is complete, the WLAN adapter is ready for operation.

14

Installation de la clé WLAN sous WINDOWS 7

Insérez le CD-ROM fourni contenant les pilotes nécessaires dans le lecteur de DVD. Une fenêtre est affichée dans laquelle vous pouvez choisir l‘action à exécuter. Sélectionnez ->

Exécuter Autorun.exe.

Cliquez ensuite sur la langue d‘installation souhaitée.

15

Le CD-ROM démarre brièvement pour préparer l‘installation.

Dans la fenêtre suivante, cliquez sur -> Suivant

16

Sélectionnez -> Installer pour commencer l‘installation.

Une barre montre la progression de l‘installation. Attendez la fin de l‘installation.

17

A la fin de l‘installation, cliquez sur -> Oui, redémarrer l‘ordinateur maintenant.

Après le redémarrage de votre ordinateur, insérez la clé WLAN dans un port USB libre de votre ordinateur. Windows 7 détecte la clé et installe automatiquement les pilotes nécessaires – ceci ne prend en général que quelques secondes.

18

La fenêtre de configuration de la connexion entre la clé WLAN et le routeur s‘ouvre automatiquement. Si cette fenêtre ne s‘affiche pas automatiquement, double-cliquez sur l‘icône « Realtek 11n USB ». Dans la fenêtre ouverte, cliquez sur l‘onglet -> Réseau dis-

ponible. (Si votre routeur prend en charge WPS, sélectionnez l‘onglet -> WiFi-Protec-

ted Setup et suivez les indications fournies.)

Ouvrez le réseau voulu avec un double-clic puis entrez – si elle est nécessaire – la clé de réseau. Confirmez les données saisies puis cliquez sur -> OK.

19

Dans la fenêtre -> Général (qui est affichée automatiquement après la saisie de la clé), vous pouvez contrôler la qualité de la connexion et l‘intensité du signal.

L‘installation est terminée, la clé WLAN est prête à fonctionner.

20

Installatie van de WLAN-adapter onder WINDOWS 7

Plaats de meegeleverde CD met de benodigde drivers in het DVD-station. Een requester wordt geopend en vraagt, hoe u verder wilt gaan. Kies -> Autorun.exe utvoeren

Klik aansluitend op de taal, waarin de setup moet worden uitgevoerd.

21

De CD draait kort om de installatie voor te bereiden.

Klik in het volgende venster op -> Volgande

22

Kies -> Installeren, om met de installatie te beginnen.

Een balk geeft de voortgang van de installatie aan. Wacht, tot het einde is bereikt.

23

Wanneer de installatie is afgerond klikt u op -> Ja, ik wil mijn computer nu opnieuw

opstarten.

Nadat uw PC opnieuw is gestart, plaatst u de WLAN-adapter in een vrije USB-poort van uw computer. Windows 7 herkent de adapter en installeert automatisch nog enkele drivers; dat duurt enkele seconden.

24

Het venster voor het maken van de verbinding tussen WLAN-adapter en router wordt automatisch geopend. Wanneer dit niet het geval is, dan kunt u dit ook zelf door dubbelklikken op het „Realtek 11n USB“ icoon starten. Klik in het geopend venster op het tabblad

-> Beschikbaar netwerk. (Wanneer uw router WPS ondersteunt, dan opent u het tabblad -> WiFi-Protected Setup en gaat u verder zoals daar beschreven.)

Open met een dubbelklik het netwerk van uw keuze en voer daarna, indien nodig, de netwerktoegangscode in. Bevestig deze en klik dan op -> OK.

25

In het venster -> Algemeen (wordt automatisch geopend na invoer van de toegangscode) kunt u de verbindingskwaliteit en de signaalsterkte controleren.

De installatie is afgerond, de WLAN-adapter is gereed voor gebruik.

26

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement