Samsung HW-F750 User manual

Samsung HW-F750 User manual
Crysta Surround Air Track
(Active Speaker System)
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www. samsung. com/register
featlJres
SoundShare
SoundShare produces TV sound on your SAT via a Bluetooth connection and controls the sound.
HOM I
HDMI transmits video and audio signals simultaneously, and provides a clearer picture.
The unit is also equipped with the ARC function which lets you listen to sound from your TV via an HDMI cable through the Crystal
Surround Air Track. This function is only available if you connect the unit to an ARC compliant T\f.
30 Sound Plus
The 3D OOUND PLUS feature adds depth and spaciousness to your listening experience.
Wireless Subwoofer
Sannsung's wireless module does EJ:Nay with cables running between the main unit and the subwoofer.
Instead, the subwoofer connects to a compact wireless module that communicates with the mai'n unit.
Special Sound mode
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, and OFF (Original Sound) depending on the type of content you want to enjoy.
Multi-function Remote Control
The supplied remote control can be used to control the TV connected to this unit. (Works only for Samsung lVs)
The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button.
Active Speak·er System
This unit features an Active Speaker System that provides high sound quality in a single slim unit.
This unit does not require any satellite loudspeakers or speaker cabling, which are normally associated with conventional surround
sound systems.
USB Host support
You can connect and play music files from external USB storage devices such as MP3 players,
USB flash memory, etc. using the Air Track's USB HOST function.
Bluetooth Function
You can use connect a Bluetooth device to the SAT and enjoy music with high quality stereo sound, all without wires!
LICENSE
[I] DOLBY
t:*irTAL i
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
8 dts
2.0""'""'
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Ucensing LLC in the United States and other countries.
Hi:Jml
- To send inquiries and requests regarding open sources, contact Samsung via Email ([email protected]).
2
safety information
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER.SERVlCEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUAUFIEO SERVICE PERSONNEL
A
The lighting flash and Arrowhead within the
triangle are warning signs alerting you to
dangerous voltage Inside the prod ~Lt
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER P R BACK). NO USER SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamaUon point within Uhe triangle is a
warning sign alerting you to important
instrucUons accompanying the prod ~Lt.
WARNING
• To reduce the nsk of fire or electric shock, do not expose this appliance to rain or moisture.
• To prevent irjury, this apparatus must be securely attached to Uhe ftoormall in accordance v.ith the installaUon instrucUons.
CAUTION
• Do not expose this apparatus to dlippng or splashing. Do not put ot:jects filled With liquds, suCh as vases on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the Wall socket. Consequently, the power plug must be easily and readily
accessible at all times.
This product sa'tisfies FCC regulations When shielded cables and connectors are used to connect the untt to other equipment. To prevent
electronnagnetic interference v.ith electlic appliances, such as radios and te19\Asions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply v.ith the limits for a Class B dgital deiAce, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance v.ith the instructions, may cause
harmful interference to rado communications. However, there is no guarantee that interference v.ill not occur in a particular installation.
If this equipment does ceuse hannful interference to radio or television reception, Which cen be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the folloNing measures:
• Reolient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet that is on a different drcuit than the rado or TV.
• Consult the dealer or an expelienced rado/TV teehnidan for help.
caution : FCC regulations state that any unautholized changes or modficetions to this equipment may void! the user's autholity to oparate it.
Important Safety Instructions
Read these operating instrucUons cerefully before using 1he uit. Folk:JW all the safety instructions isted bek:JW. Keep these operating instr!Ltlons hancty for
futtre reference.
1)
2)
3)
4)
5)
6)
7)
Read these instrucUons.
Keep these Instructions.
Heed all warrings.
Follow all instructions.
Do not use this apparatus near water.
Clean only 'Aith dry Cloth.
Do not block any ventilation openings. Install in
accordance v.ith the manufacturer's instructions.
8) Do not install near any heat sources suCh as
radators, heat registers, stoves, or other apparatus Qncluding
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the pdalized or grounding-type
plug. A polarized plug has two blades 'Aith one 'lAder than the other.
A grounding type plug has ~NO blades and a third grounding prong.
The 'lAde blade or the third prong are provided for your safety. If the
proiAded plug does not fit into your outlet, consult an electlidan for
replacement of the obsolete outlet.
10) Protect the power oord from being walked on or p nehed
particularly at plugs, convenience receptaCles, and the point Where
they exit from Uhe apparatus.
11) Only use attaehmenvaccessones
spedfied by the manufacturer.
12) Use only v.ith the cart, stand, tripod,
bracket, or table spedfied by the
manufacturer, or sold 'lAth the apparatus.
When a cart is used, use caution When
moving the cart/apparatus comtination
to avdd irjury from tip-over.
13) Unplug this apparatus duling Hghtning storms or when unused for
long peliods of time.
14) Refer all seriAdng to qualified seriAoe personnel. Ser\Adng is
required when the apparatus has been damaged in any way, such
as When the poNer-supply cord or plug is damaged, liquid has
been splled or ot:jects have fallen into the apparatus, the
apparatus has been exposed to rain or mdsture, does not operate
normally, or has been dropped.
3
PRECAUTIONS
Ensure that the AC J:OWer supply in your house complies with the power requirements listed on the identificaUon sUcker located on the
back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for venUiation (3-4 inches). Make sure the venUiation slots are not covered. 0:> not place the unit on amplifiers or other equipment which may become hot. This
unit is designed for conUnuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to
leave it unused for a long period of Ume.
During thunderstonms, Cisconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the untt to direct sunight or other heat sources.
llis could lead to overheating and cause the unit to malfunction.
Protect the product from moisture Q.e. vases), and excess heat (e.g.
a fireplace) or equipment creating strong magnetic or electric fields
Disconnect the power cable from the AC supply if the unit malfunctions.
Your product is not intended for industrial use. Tl'is product is for personal use only.
Condensation may occur ff your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2
hours until the unit has reaChed room temperature before uSing.
The batteries used v.i111 this product contain chemicals that are harmful to
the environment.
Do not dispose of batteries in the general household trash.
4
ENG
contents
FEATURES
2
2
Features
License
SAFETY INFORMATION
3
4
Safety warnings
Precautions
GETTING STARTED
6
6
Before reading the user’s manual
What’s included
DESCRIPTIONS
7
8
Front/Bottom Panel
Rear Panel
REMOTE CONTROL
9
Tour of the remote control
10
11
12
14
Installing the wall mount
Connecting the Wireless Subwoofer
Attaching the Toroidal Ferrite Core to the Power
Cord of the Subwoofer
Looping the power cable around the toroidal
core
Auto Sound Calibration (ASC)
Connecting an external device using HDMI
cable
Connecting an external device using Audio
(Analog) cable or Optical (Digital) cable
Assembling the Cable clip
FUNCTIONS
15
15
17
18
19
22
Input mode
Bluetooth
SoundShare
USB
Using the remote control
Software upgrade
TROUBLESHOOTING
23
Troubleshooting
APPENDIX
24
Specifications
2
3
6
7
9
10
CONNECTIONS
12
12
13
14
15
23
24
5
getting started
BEFORE READING THE USER'S MANUAL
Note the following terms before reading the user manual.
Icons used in this manual
Icon
Term
Definition
OJ
Caution
Indicates a situation where a function does not operate or settings may be
canceled.
rEJ
Note
Indicates tips or instructions on the page that help you operate a function.
Safety Instructions and Troubleshooting
1) Be sure to familiarize yourself with the Safety Instructions before using this product. (See page 3)
2) If a problem occurs, check Troubleshooting. (See page 23)
Copyright
©2013 Samsung Electronics Co.,Ltd.
All rights reserved; no part or whole of this user's manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.,Ltd.
WHAT'S INCLUDED
Check for the supplied accessories shown below.
0
(Holder-screw:2EA)
6> (Screw:2EA)
Remote Control/
Batteries (AM size)
(AH59-02545A/
4301-00011 6)
User Manual
(AH68-02617A)
? y
Power Corti
(3903.000598)
DC Adapter
(BN44-00639B)
Bracket-Wall Mount
(AH61-03627A)
Screw
(AH61-CX3342A/
0001-001961)
fiPwn ~
AUX Cable
(BN39.01286A)
ASC Microphone
(AH59-02570A)
USB Cable
(AH39-011 78B)
(For Subwoofer
power cable 1EA)
t;;
Toroidal ferrite core
(3301-000144)
• The appearance of the accessories may differ slightly from the illustrattons above.
• Use· the dedicated USB cable to connect external USB devices to the unit.
6
Cable Clip
(AH65.000128 )
descriptions
FRONT/ BOTTOM PANEL
VOLUME+/-
VACUUM
TUBE AMP
0
m
en
()
~
"0
.....
0
z
GJ
DISPLAY
Dsplays the current mode.
- If there is no input from the product or remote oontrol for 15
seconds, the display will turn off automatically.
- The display ~Mil not turn off automatically in BT READY, TV
READY and USB Playing modes.
USB PORT
Connect USB devices such as MP3 players here to the play files
on the devices.
POWER BUTTON
Turns the Crystal Surround Air Track on and off.
FUNCTION
BUTTON
Selects the D.IN, AUX. HDMI, BT, TY, USB input.
- While the unit is powered, pressing the (F".) button for more than
3 seconds sets the button to act as MUTE button.
To cancel MUTE button setup, press (F.) button for more than 3
seconds again.
• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
• Do not bring cellular phones or mobile devices near the vacuum tube amp, or put other
electronic devices on the top of the product. Signals from these devices can noise or
distortion in the audio.
• Do not let children touch the product's surface when the set is on. It ~Mil be hot.
7
descriptions
REAR PANEL
GJ
ASC IN JACK
(ID
POWER SUPPLY
Used to connect the ASC Microphone.
IN
Connect the AC power adaptor jack to the power supply jack
properly, and then connect the AC power adaptor plug to the wall
outlet.
~
OPTICAL IN
Connect to the digital {optical) output of an external device.
rn
AUXIN
Connect to the Analog output of an external device.
@)
HDMIOUTJACK
Outputs digital video and audio signals simultaneously using an
HDMI cable.
cru
HDMIINJACK
Receives digital video and audio signals simultaneously from an
external source using an HDMI cable.
w
• When disconnecting the power cable of the AC power adaptor from the wall outlet, pull
the plug. Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until all connections
between components are complete.
8
remote control
TOUR OF THE REMOTE CONTROL
POWER BUTTON
1V POWER BUTTON
Tuns tte Crystal SuTOllld Air Track
on and oil.
llms y<:n Samsung TV on and oil.
SOURCE
Tl"jS bUtton abNs you to Choose to
lsten to ado rrom the Nr track or your
SPEAKER
Press toSEIIecta comectect SAT
SOU"Ce. (SAT:SurroundAir~
TV
AUTO POWER
Syndrorizes the !>lr l1"ad< to a connacted
qJiica souce 'Jia the Optical Jock so It tl.mS
on a.rtomallcally 'M1M ~ h.m on yr:xx lY.
m
Press to select a connected TV's video
sou roe.
_ __. SOUNDSHARE
REPEAT
Select Repeat Rle, All, Random.
Adjusts the TV volume level.
Anynet+
Anynet+ Is a function that enables you to
control other Sannsung De\Aces IMth your
Samsung TV's rerrote control.
lVMUTE
Mutes the sound from the TV Press
again to restore the sound to the
previous volume level.
AUDIO SYNC
1V INFO, 1V PRE-CH
Used to help sync video to audio
when connected to a digital TV
Display current TV status.
Moves to the pre\Aous TV Channel.
VTDIMMER
You can control the brightness of the
CONTROL BUTTON
Play, pause, or stop playing
a music file, or search forwards or
backwardS for a music ftle.
VACUUM TUBE AMP's display.
lV CHANNEL
SwitChes between the available TV
channels.
SOUND EFFECT
Selects the Sound Ellect:
(MUSIC, NEWS, DRAMA. CINEMA,
SPORTS, GAME, OFF (Orlg"nal Sot.nd))
SMART VOLUME
Reg..Cates and stabilzes the wl.rne revet
aganst a drastic VOlume Change.
3D SOU ND PLUS
VOLUME, SIW LEVEL
llis feature addS depth and
spaciousness to the SOtnl.
A(fusts the VOlume tevel a tne lilt
~\Jsts the Sut:N.oofer level.
MUTE
Mutes the sound from the u-it. Press
agan to restore the sound to the
DRC
You can use ttiS 1\.nctbn to (!l;jOf Ddby
~al SOUld vAMln watdWlg mo\Aes at
low 'A:lll.me at right {Sta1dml, MAX, MIN).
previous VOlume lellel.
• SAT stands for Surround Air Track, which is a Samsung's proprietary name.
• The remote control can operate TVs made by SAMSUNG only.
• Depending on the TV you are using, you may not be able to operate your TV with this remote control. If you can't,
operate the TV using the TV's remote control.
Installing batteries in the Remote Control
1.
Uft the cover at the back of
the remote control upward as
shown.
2. Install tvw AAA size batteries.
Make sure to match the"+" and·-· ends
of the batteries with the aagram ins'de the
compartment.
~
m
This produces TV sound on your SAT
V1a a Bluetooth connecuon and controlS
the sound.
lVVOLUME
•
s
:Il
:r-""t"''r-----.1 1V SOURCE
3. Replace the cover.
Assurring typcal 1V usage,
the batteries last for about
one yeer.
Operational Range of the Remote Control
You can use the remote control up to 23 feet (7 meters) in a straight line from the unt. You can also operate the
remote at a horizontal angle of up to 30° from the remote control sensor.
9
()
0
:z
-f
~
r
connections
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.
Installation Precautions
• Install on a vertical wall only.
• For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the
weight of the set.
• Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or
install the unit on different wall that can support the unit's weight.
• Purchase and use the fixing screws or mollys appropriate for the kind of wall you have (plaster board, iron
board, wood, etc.). If possible, fix the support screws into wall studs.
• Connect cables from the unit to external devices before you install it on the wall .
• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
1. Place the wall mount bracket on a wall surface and then
secure it with two screNs.
If you are hanging the unit below a TV, be sure to install the
wall mount bracket so that the arrow (t ) is placed in the
center of the TV.
Also make sure the unit is at least two inches (5 em)
below the· TV.
2. Align the two HOLDER-SCREWs with the screw holes
on the left and right sides of the MAIN UNIT, and then fix
them to the main unit with the supplied screws.
3. Fit the unit into the corresponding slots of the wall mount
bracket. For secure installation, make sure the mounting
studs slide firmly down into the bottom of the slots.
4. The installation is complete.
• Do not hang onto the installed unit and avoid any impact to the unit.
• Secure the unit firmly to the 'Nail so that it does not fall off. If the unit falls off, it may cause an
injury or damage the product.
• When the unit is installed on a wall, please make sure that children do not pull any of the
connecting cables, as it may cause it to fall.
• For the optimal performance of a wall mount installation, install the speaker system at least 2
inches (5 em) below the TV.
• For your safety, please use the product laid down on a secure surface in case you don't install it
on a wall mount.
10
CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking 10 is preset at the factory and the main unit and subwoofer should link (connect
wirelessly) automatically when the main unit is turned on. If the LINK indicator cloes not light when the main
unit and subwoofer are turned on, please set the 10 by following the procedure below.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the 10 SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
•
• The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
()
0
z
z
m
g
0
z
(/)
ID SET
e
STANDBY
LI NK
•
3. While the main unit is powered off (STANDBY mode),
press MUTE on the remote control for 5 seconds.
4. The 10 SET message appears on the main unit's OLEO display.
5. To finalize the link, turn the main unit's power on while the
subwoofer's LINK LED blinks.
• The main unit and the subwoofer are now linked (connected).
• The LINK indicator {blue LED) on the subwoofer is turned on.
• You can enjoy better sound from the wireless subwoofer by
selecting the sound effect. (See page 20)
• Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.
• If the main unit is powered off, the wireless subwoofer will be ir1l the standby mode and the
STANDBY LED on the upper side will come on after the LINK indicator (Blue LED) blinks for 30
seconds.
• If you use a devioe that uses the same frequency (2.4GHz) near the system, interference may
cause some sound interruption.
• The transmission distance of the wireless signal betvveen the main unit and subwoofer is about
33 ft., but may vary depending on your operating environment. If a steel-concrete or metallic
wall is betvveen the main unit and the wireless subwoofer, the system may not operate at all,
because the wireless signal cannot penetrate metal.
• If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the
connection between the main unit and wireless subwoofer.
! • The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from
water and moisture.
• For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.
11
connections
ATTACHIING THE TOROIDAL FERRITE CORE TO THE POWER CORD
OF THE SUBWOOFER
Attaching the Toroidal ferrite core to the power cord of the subwoofer helps
prevent RF interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make two loops around the core with the power cable of the subwoofer.
3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure
shows and press it until it clicks.
LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE
miD
~
·· ··· .
...
0
b
Lift up to release the
lock and open the core.
•
Make two loops around the core
with the power cable. (Start
Close the lock.
winding 5-1 Ocm (12.75- 25.5
in.) away from the core).
AUTO SOUND CALIBRATION
For your best sound experience, ASC provides re-positioning and calibrating Air Track and sound devices
including the Sub Woofer, by automatically adjusting sound balance considering the distance between devices
and frequency characteristics.
1. Place the ASC Microphone at the listening position.
• You should place the ASC Microphone at the actual listening
location first, and then connect the ASC Microphone to the
ASC IN jack on the Air Track for precise calibration
2. Connect ~he ASC Microphone into the ASC IN jack on the Air
track. The Calibration starts automatically and it may take
about 2 minutes.
• If you turn off the Air Track or unplug the ASC microphone
before the completion message appears on the display,
calibration will be cancelled and incomplete. In such a case,
plug the ASC microphone into the ASC IN jack again.
• When the Calibration completes, you can choose the ASC
mode by pressing the Sound Effect button on the remote
control.
• During the ASC calibration, all other buttons do not work except the power button.
• ASC will abort with error if you change the set's position in the middle of ASC calibration.
12
CONNECTING AN EXTERNAL DEVICE USING HDMI CABLE
HOM I is the standard digital interface for connecting to such devices as a TVs, projectors, DVD players,
Blu-ray players, set top boxes, and more.
HOM I removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality
as it was originally created in the digital source.
0
0
z
z
m
0
::::1
0
z
HOM I Cable
~
__
HDMIIN
\..._
.
-~ ~ rn~,. ,j..........
~
TV
i5
en
...)
HDMIIN
Connect an HOMI cable (not supplied) from the HDMIIN jack on the back of the product to the HDMI OUT
jack on your digital devices.
and,
HDMI OUT (HDMI)
• Connect an HOMI cable from the HDMI OUT jack on the back of the product to the HDMIIN jack on your TV.
• HOMI is an interface that enables the digital transmission of video and audio data with just
a single connector.
HDMI OUT (ARC)
• The ARC 1unction allows digital audio to output via the HDMI OUT (ARC) port.
It can be enabled only when the Air Track is connectEd to a TV that supports the ARC function.
• Anynet+ must be turned on.
lt:J •
Tlis function is not available if the HDMI cable does not support ARC.
13
connections
CONNECTING AN EXTERNAL DEVICE USING AUDIO {ANALOG)
CABLE OR OPTICAL {DIGITAL) CABLE
This unit comes equipped with one optical in digital jack and one audio analog in ]ack, giving you two ways to
connect it to a lY.
1 b=iJ:ol
[~~]
6
~·
~ lCJ
€@liD;m>
BD/DVD player/
Set-top box/
Game console
Optical Cable
(not supplied)
or
UDIO
T
[IJ ~udioCab~®
AUXIN
AUXIN
Connect AUX IN (Audio) on the main unit to the AUDIO OUT of the TV or Source Device.
Be sure to match connector colors.
or,
OPTICAL IN
Connect the Digital Input on the main unit to the OPTICAL OUT of the TV or Source Device.
lt::J • connections
Do not connect the power cord of this product or your TV to the wall outlet until all
between components are complete.
• Before moving or installing this product, be sure to turn off the power and disconnect the power
cord.
ASSEMBLING THE CABLE CLIP
.; "'
/"
rj
• '.v
~( -.
• WJ
14
•!
-
~
/"
\e '.nV
•
~·
{ I•
. ,~
'
1J;
•!
"
~
"'
flJnctions
INPUT MODE
You can select D.IN, AUX, HOM I, BT, TV input or USB input.
Press an appropriate button on the remote control to select a desired mode, or press::::·. to select one from:
D.IN, AUX, HDMI, BT, TV or USB mode.
Input mode
Display
Optical Digital input
D.IN
AUXinput
AUX
HDMI input
HDMI
BLUETOOTH mode
BT
TV mode
TV
USB mode
USB
•~
z
()
-1
5
z
(/)
F.
The unit tunns off automatically in the following situations:
• BT!TV/USBIHDMI!ARC/D.IN MODE
- If there is no audio signal for 20 minutes.
• AUX Mode
- If no KEY input is entered for 8 hours when the cable is connected.
- If the AUX cable is disconnected for 20 minutes.
• Th.e ARC function is activated in D.IN mode if the unit is connected to an ARC supporting T\1.
• To turn off the ARC function, turn Anynet off.
• Use the provided cable if a USB flash memory device cannot be connected directly to the unit.
BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using
a short wireless connection.
• A Bluetooth device may cause noise or malfunction, depending on usage, when:
- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Air
Track.
It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
- It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
• Pair the Air Track with the Bluetooth device while they are close together.
• The further the distance is between Air Track and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
• The Bluetooth connection only works when it is close to the set. The connection will be automatically cut off if
the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles
such as walls or doors.
• This wireless device may cause electric interference during its operation.
15
flJnctions
To connect the Air Track to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
•
•• Connect
•
•
(!c
ID
>J)
Btuetooth device
1. Press the SOURCE button on the remote control of the AirTrack to display the BT message.
• You will see WAIT for 4 seconds and then BT READY on the front display of the Air Track.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth
device's user manual.)
3. Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "(Samsung) AirTrack" from the list.
• Whel1l the Air Track is connected to the Bluetooth device, it 'Nill display BT CONNECTED • BT on the front
display.
• If the Bluetooth device has failed to pair with the Air Track, delete the previous "[Samsung] AirTrack" found
by the Bluetooth device and have it search for the Air Track again.
5. Play music on the connected device.
• You can listen to the music playing on the connected Bluetooth device over the Crystal Surround Air Track
system.
• In BT mode, Play/RepeaVStop/NexVPrev functions are not available.
• You may be required to enter a PIN code (passvvord} when connecting the Bluetooth device to
the Air Track. If the PIN code input window appears, enter <0000>.
• The Air Track supports SBC data(44.1kHz, 48kHz).
• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports the A2DP (AV) function.
• You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.
• Only one Bluetooth device can be paired at a time.
• Once you have turned off Air Track and the pairing is disconnected, the pairing will not be
restored automatically. To reconnect, you must pair the device again.
• Search or connection may not be performed properly by Air Track in the following cases:
- If there is a strong electrical field around Air Track.
- If several Bluetooth devices are simultaneously paired with AirTrack
- If the Bluetooth device is turned off, not in place, or ma~unctions
- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas
stoves use the same frequency range as the Bluetooth device, whtich can cause electric
interference.
16
To disconnect the Bluetooth device from the Air Track
You can disconnect the Bluetooth device from the Nr Track.
For instructions, see the Bluetooth device's user manual.
• The Air Track will be disconnected.
• When the Nr Track is disconnected from the Bluetooth device the Nr Track will <isplay BT DISCONNECTED
on the front <isplay.
To disconnect the Air Track from the Bluetooth device
Press the ( F. ) button on the front panel of the Nr Track to switch from BT to another mode or tum off the Air Track.
"'1'1
c
z
• The connected Bluetooth device will wait a certain amount of time for a response from the Nr Track before
terminating the connection.
(Disconnection time may offer, depending on the Bluetooth device)
()
.....
0
z
en
• The currently connected device will be disconnected.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Nr
Track and the Bluetooth device exceeds 16.25 ft. (5m).
• If the Bluetooth device comes back into the effective range after disconnecting, you can restart the Nr
Track to restore the pairing with the Bluetooth device.
• The Nr Track automatically turns off after 20 minutes in the Ready state.
SOUNDSHARE
This section explains how to connect the Crystal Surround Ajr Track to a Bluetooth compatible SAMSUNG TV.
To connect the Crystal Surround Air Track to a Bluetooth compatible
Samsung TV
I
I
' -----
---~/ ~
Connect
Press the ( F~. ) button to select the TV mode, and then connect the TV to the Crystal Surround Nr Track.
• The unit will play the TV's audio when it is connected to the TV.
• If you change to another mode, except the TV SoundShare mode, or turn off the Air Track, you will hear audio
from the TV again.
<To pai r to your TV>
To produce TV sound on your Air Track via a Bluetooth connection, you need to pair your system to the
Bluetooth comp~ant TV first. Once the pairing is established, the pairing information is recorded and kept and no
further Bluetooth connection message will appear. Bring the Nr Track and the TV close together before pairing.
1. Tum on the Samsung TV and Air Track.
• Set Add New Device in the TV's SoundShare Setting menu to On.
17
flJnctions
2. When you change the mode of the Air Track to TV, a message asking whether to proceed with
Bluetooth pairing is displayed. "[Samsung] AirTrack" appears on the 1V screen.
3. Select <Yes> on the 1V screen. The pairing with the Air Track will be completed.
• Once the pairing is established, when you change the Air Track to the 1V mode from other input modes, it
v.Jill automatically oonnect to the 1V.
• Changing the Air Track from 1V mode to any other mode will cancel the SoundShare connection.
• If you want to cancel the existing pairing of the SAT to a 1V and pair your SAT to a different 1V.
- Press the PLAY/PAUSE button on the SAT for 5 seconds in the 1V input mode to cancel the existing
pairing. You can now pair it to a different TV.
• In the SoundShare mode, you can control the volume and mute using either the 1V remote or the SAT remote.
• 1V SoundShare operation range
- recommended pairing range: within 20 inches (within 50cm)
- recommended operation range: within 16.25 ft. (5m)
• If the distance between the Air Track and Samsung 1V is over 16.25 ft. (5m), the connection or the
sound can be cut off. If this occurs, oonnect to the Bluetooth device again within the operational range.
• Make sure the Samsung 1V's SoundShare mode is on before you use this function.
• The PLAY, NEXT, PREV, STOP buttons will not work in the SoundShare mode.
• Bluetooth Standby On function
- Air Track will be powered on automatically when you turn the 1V on if you connected 1V and Air Track with
SoundShare function.
You can toggle this fucntion On/Off by pressing SOURCE button over 5 seconds when AirTrack is
powered off. If set to Off, the product turns off automatically when the 1V turns off, but it does not turn on
automatically.
• The SoundShare function is supported by some Sarnsung 1Vs released after 2013. Check whether
your 1V supports SoundShare before you begin. (For more information, refer to the user' s guide of your
1V.}
USB
I
.........
.....
.....
•J
--~/,_
! _ _---....
.. -..--.
t
~
.a
,..-.......
,. a . a
1. Connect the USB device to the USB port of the product.
2. Press the (F.) button on the front panel of the Air Track repeatedly until USB appears.
3. USB appears on the display screen and then disappears.
• The Crystal Surround Air Track connection is complete.
• The SAT automatically turns off (Auto Power Off) if no USB device has been connected for more than 20 minutes.
• Playback will stop if you change the set's position during playing files from USB device.
Before you connect a USB device
Be aware of the following:
• If the file name of a folder on a USB device exceeds 10
characters, it is not displayed on the OLEO.
• This product may not be compatible with certain types of USB
storage media.
• The Air Track supports the FAT16 and FAT32 file systems.
- The NTFS file system is not supported.
18
I
• Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a USB
compatibility problem.
• Do not connect multiple storage devices to the product via a multi-card reader. It may not operate
property.
• Digital camera PTP protocols are not supported.
• Do not remove the USB de\rice while it is being read.
• DAM-protected music files (MP3, WMA) from a commercial web site will not be played.
• External HODs are not supported.
• Mobile phone devices are not supported.
• File Format Type Compatibiity list:
Fonnat
Codec
MPEG 1 Layer2
MPEG 1 Layer3
MPEG 2 Layer3
•.mp3
z
()
-I
0
z
en
W~
•.wma
Format MSAudio1
WElle Format MSAudio2
•.aac
MG
MG-LG
HE-MG
-
•.wav
•.Ogg
OGG 1.1.0
FLAG 1.1.0, FLAG 12.1
•.Fiac
* Supporting Sampling Rate above i 6KHz
USING THE REMOTE CONTROL
Play/ Pause/Stop
During playback, press the
•n.• button.
• Press the •n button agan to stop playing the file temporarily.
Press the •n button to play the selected file.
• To stop playback, press the Stop (• ) button during playback.
Skip Forward/Back
During playback, press the ,.._ ,lil+l button.
• When there is more than one file and you press the lil+l button, the next file
is selected.
- ,_
®
•c•
@
A...,.,..,..~:~
ODD~
!~!so
c:±J0c:±J
[email protected]
• When there is more than one file and you press the ,.. button, the
previous file is selected.
Using the REPEAT function
Repeat playback allows you to repeatedly play a file, repeat all, randomly play
files, or tum Repeat off.
Press the REPEAT button.
•
•
•
•
•~
REPEAT OFF : cancels Repeat Playback.
REPEAT FILE : Repeat playing a track.
REPEAT ALL : Repeat playing all tracks.
REPEAT RANDOM : Plays tracks in random order. (A track that has
already been played may be played again.)
• You can set the REPEAT function ci.lring the playback of music from
a USB drive.
19
flJnctions
Muting the sound
This is useful when answering a doorbell or telephone call.
1. To mute the sound of this unit, press the MUTE button on the remote
control.
2. To mute the 1V, press the TV MUTE (Ci{') button on the remote control.
3. Press MUTE/ TV MUTE (Ci{') on the remote control again (or press
VOLUME +/-) to restore the sound.
Using the 30 SOUND PLUS function
The 3D Sound Plus feature adds depth and spaciousness to the sound.
Press 3D SOUND PLUS on the remote control.
• Each time the button is pressed, the selection changes as follows :
3D SOUND PLUS OFF • 3D SOUND PLUS MUSIC • 3D SOUND
PLUS MOVIE
• When you turn on 30 Sound Plus, the Sound Effect function will
automatically change to OFF.
Using the SMART VOLUME function
This will regulate and stabilize the volume level against a drastic volume
change caused by a channel change or scene transition.
Press SMART VOLUME on the remote control.
• Each time the button is pressed, the selection changes as follows :
SMART VOLUME ON • SMART VOLUME OFF
Using the Sound effect function
You can select from 7 different sound modes - MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME, and OFF (Original Sound) - depending on the
type of sources you want to enjoy.
Press SOUND EFFECT on the remote control.
• Select the OFF mode if you want to enjoy the original sound.
• We recommend that you select a Sound Effect based on the
source material and your personal taste.
• When you choose a Sound Effect mode (except OFF), 3D Sound
Plus will automatically be turned OFF.
• Once completed ASC calibration, the ASC mode will be added.
(See page 12)
Using the S/W LEVEL function
You can control the base volume with the SN.J Level button on the remote
control.
1. Press the S/W LEVEL button on the Remote control.
2. •sw o• appears on the display.
3. Press< or > button on the LEVEL key if you want to increase or decrease
the subwoofer volume. You can set it from SW -6 to SW +6.
20
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automaticaNy turned on when you tum on the
1V or any device connected to the Air Track with ttle optical cable.
Press AUTO POWER on the remote control of ttis unt.
• The Auto power link function ttms on and off each time you press AUTO
POWER.
AUTO POWER LINK
ON
OFF
Display
PO'M:A LINK ON
PO'M:A LINK OFF
•~
z
()
• If a TV or any device connected to Air Track with the optical cable is off
and there is no digital input, the Nr Track is turned off after 20 minutes.
• These functions are available onty when the Anynet+ (HDMI-CEC) Is
turned off.
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Nr Track is connected to a
digitallY. If this occurs, adjust the audio delay time to match the video.
Press AUDIO SYNC +1-. on the remote control of this unit.
• You can use the + , - buttons to set ttle audio delay time between 0 ms
and 300 ms.
• In USB mode, TV mode or BT mode, the Audio Sync function may
not work.
Using the DRC function
This feature balances the range between the loudest and quietest sounds.
You can use ths function to ef1oy Dolby Digital sound when watching movies
at low volume at night.
Press DRC on the remote control of ths unit.
• Each time the button is pressed, the selection changes as folloos :
DRC STANDARD • DAC MAX • DRC MIN
Using the VT DIMMER function
This feature controls the brightness of the VACUUM TUBE AMP.
Press VT DIMMER on the remote control of this unit.
• Each time the button is pressed, the selection changes as follows :
VT DIMMER OFF • VT DIMMER MIN • VT DIMMER MAX
• The VT DIMMER does not function for 30 seconds when you
turned on the product for the very first time.
SPEAKER button
If the TV and Air Track are connected via HDMI, this button lets you select
between ~stening to audio through your TV or through the Nr Track.
Press SPEAKER on the remote control of this unt.
AUDIO MODE
HDMIIN
ARC
SPEAKER
TV
Air Track
TV
Air Track
Scroll Display
TV SPEAKER
AVRSPEAKER
TV SPEAKER
AVA SPEAKER
Display
1VSPK
HDMI
SMUTE
TV ARC
21
-1
0
z
en
flJnctions
-
N-
@
®
auaP1:& siQ&tv~DU~a
DOD @
:·····....: .........
~iG:l!D
;
:
........
CD0CD
8 @8
Using the Anynet+{HDMI-CEC) function
Anynet+ is a function that enables you to control other Samsung Devices
with your Samsung TV's remote control.
The Anynet + function turns on and off each time you press Anynet+.
1. Connect the product to a Samsung TV with an HDMI cable.
(See page 13)
2. Set the Anynet+ function on your TV and the SAT to ON. (See the
TV instruction manual for more inforrnat1ion.)
• Depending on your TV, certain HDMI output resolutions may not work.
• Please refer to the user's manual of your TV and check for the
~D!C logo (If your TV has an ~ logo, then it supports the
Anynet+ function.)
Using the TV functions {with Samsung TVs only)
• Press TV SOURCE on the remote control to change the TV's input
source.
• Press TV INFO on the remote control to display the TV channel
information.
• Press TV CH on the remote control to select the TV channel.
• Press TV VOL on the remote control to increase or decrease the volume
level.
• Use TV PRE-CH button to move to the previous TV channel in TV mode.
• When you press the SoundS hare button, the TV's sound is
transmitted through the Air Track system via a Bluetooth
connection. The Air Track also controls the sound volume,
sound quality, etc.
• The remote control can operate TVs made by SAMSUNG only.
SOFTWARE UPGRADE
Samsung may offer upgrades for the Crystal Surround Air
Track's system firmware in the future.
If an upgrade is offered, you can upgrade the firmware by
connecting a USB drive with the firmware upgrade stored on
it to the USB port on your Air Track.
Note that if there are multiple upgrade files, you must load them
onto the USB drive singly and use them to upgrade the firmware
one at a time.
t-===~='""=~F====='\
Please visit Samsung.com or contact the Samsung call center
to receive more information about downloading upgrades files.
I
• lnserit a USB drive containing the firmware upgrade into the USB port on the· main unit.
• Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will
turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
• Once upgrading the product software is completed, turn off the product and then press and hold (• l button for
a while to reset the product.
• If the firmware fails to upgrade, we recommend formatting the USB device in FAT1 6 and trying again.
• For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
• Depending on the manufacturer, some USB devices may not be supported.
22
trol Jbleshooting
Before requesting service, please check the following.
I
Symptom
The unit will not turn on.
Check
Remedy
• Is the power cord plugged into
the outlet?
• Connect the power plug to the
outlet.
I
•;xj
0
A function does not work when the
button is pressed.
• Is there static electricity in the
air?
• Disconnect the power plug and
connect it again.
c
m
r
m
(/)
:::t
Sound is not produced.
8-1
z
• Is the unit properly connected
to your TV?
• Is the Mute function on?
• Connect it correctly.
• Press the Mute button to
cancel the function.
• Is the volume set to minimum?
• Adjust the volume.
The Picture does not appear on a TV
when the function is selected.
• Is the TV connected properly?
• Connect it correctly.
The remote control does not work.
• Are the batteries drained?
• Is the distance between remote
control and main unit too far?
• Replace with new batteries.
• Move closer to the unit.
The sound from the lefVright
channels are reversed.
• Are the left/right audio output
cables from the TV connected
properly?
• Check the left/right channel and
connect iVthem correctly.
The SoundShare (TV pairing) failed.
• Does your TV support
SoundShare?
• SoundShare is supported by
some Samsung TVs released
after 2013. Check your TV to
see if it supports SoundShare.
• Is your TV firmware the latest
version?
• Does an error occur when
connecting?
• Reset the TV MODE and
connect again.
G>
• Update your TV with the latest
firmware.
• Contact the call center.
• Press ll>l button for 5 seconds
to reset the product.
23
appendix
SPECIFICATIONS
Model name HW-F750
Main unit
GENERAL
DC24V
Power supply Subwoofer
(PS-WF750)
AC 120V-60Hz
Standby power consumption
0.45W
Main unit
Power
consumption Subwoofer
(PS-WF750)
29W
USB
5V/0.5A
20W
-------------------Main unit
7.72 1bs
Weight
Subwoofer
(PS-WF750)
15.98 1bs
Main unit
36.73 x 1.81 x 4.72 inches
Subwoofer
(PS-WF750)
6.89 x 13.78 x 11.61 inches
---------
Dimensions
(WxHxD)
Operating temperature range
+41 °F to +95°F
Operating humidity range
----------------------------------40W/CH, 60HM, THD = 1%, 1kHz
~--------
AMPLIFIER
Main Front
Rated output Main Top
power
Subwoofer
(PS-WF750)
SIN ratio (analog input)
Separation (1kHz)
10 % to 75 %
40W/CH, 60HM, THO = 1%, 1kHz
150W, 30HM, THD = 10%, 100Hz
65 dB
----------------------------------65 dB
* S/N ratio, distortion, separation and usable sensitivity are based on measurement using AES (Audio
Engineering Society) guidelines.
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-Weight and dimensions are approximate.
As an ENERGY STAR Partner, Samsung
has determined that this product or product
models meets the ENERGY STAR guidelines
for energy efficiency.
24
WARRANTY
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new,
in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To
receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service
can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as
proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from
the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the
property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty,
or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent
otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including,
but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not
intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other
acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs,
external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems;
incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning,
maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation;
reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG
does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND
NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE
TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED
BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF
ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG
AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG customer care center.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
U.S.A
1-800-SAMSUNG
(726-7864)
www.samsung.com
Samsung Electronics America, Inc. 85 Challenger
Road Ridgefield Park, NJ 07660
A H68-02617A-00
HW-F750
rystal Surround Air Track
ctive Speaker System)
Setup Guide
This quick setup guide explains steps to connect a TV to the unit in a quick and
easy manner. For more detailed instructions, refer to the user manual.
Precautions __
,,':_i--i.}~i~~~-:
·-~~ _':,~..-i6
• Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
• Install the unit near the AC outlet and where the AC power plug can be reached easily.
• Be sure to connect external devices to the unit before installing.
• Before moving or installing the product, be sure to turn off the power and disconnect the
power cord. Otherwise, it may cause electric shock.
AH68-02620K-OO
1
Using the Bracket-Wall Mount
0
Place the wall mount bracket on a wall surface and
then secure it with two screws.
If you are hanging the unit below a TV, be sure to
install the wall mount bracket so that the arrow (t}
is placed in the center of the TV.
Also make sure the unit is at least two inches (5
em} below the TV.
If the strength of the wall is insufficient for the
product installation, make sure to reinforce the wall
before the installation.
~ Align the screw holes on both sides of
~ the MAIN UNIT to the screw holes of the
HOLDER-SCREW, and fix it with screws.
~ Then, fit the unit into the corresponding
~ slots of the wall
mount bracket. For secure installation,
make sure the mounting studs slide
firmly down into the bottom of the slots.
o=
If you do not install this unit firmly, it may fall down
and cause injury.
2
~ This is the completion of the suggested
. . . , wall mount installation.
o=
···'j•,~~>i'>''~J
. ...
1
1
I~
For your safety, please use the product laid down
on a secure surface in case you don't install it on a
wall mount.
'
*
SI\MSUHG
~
2 inches (5 em} or more
2
••
.. \ :·.
\'·•·
. .....
I
. -- ·.-;~~~!:•
'-
Conneq$im'g
When the main unit is connected to a TV with optical cable (Digital input), it is
automatically turned on when you turn on the power of your TV.
METHOD : HDMIIN, OUT
Digital Devices
TV
HDMI IN
HDMIOUT
Main unit - HW-F750
HDMI Cable
(not supplied)
HDMI Cable
(not supplied)
t------ ~
METHOD 2 : DIGITAL AUDIO IN
METHOD 1 : AUDIO IN
AUDIO
OUT
0
HDMI OUT
·
BD/DVD player/
Set-top box/
Game console
TV
OPTICAL
OUT
0
Main unit - HW-F750
Audio Cable
Optical Cable
(not supplied)
OPTICAL IN
CJ= •
See page 11 of the user manual to connect the Wireless Subwoofer.
3
Using the 30 SOUND PLUS function
Using the AUTO POWER LINK function
The 3D Sound Plus feature adds depth and
spaciousness to the sound.
When you tum on 3D Sound Plus, the Sound Effect will
automatically change to OFF.
The Crystal Surround Air Track is automatically turned on
when you turn the power on of a TV or any device
connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
• Auto power link function turns on and off each time
Press 30 SOUND PLUS on the remote control.
you press AUTO POWER.
•
AUTO POWER LINK
•
•
Display
ON
POWER LINK ON
OFF
POWER LINK OFF
Each time the button is pressed, the selection
changes as follows :
3D SOUND PLUS OFF • 3D SOUND PLUS
MUSIC • 3D SOUND PLUS MOVIE
Using the input mode
If a TV or any device connected to Air Track with the
optical cable is off and there is no digital input, the
Air Track is turned off after 20 minutes.
These functions are available only when Anynet+
(HDMI-CEC) is turned off.
You can select D.IN, AUX, HDMI, BT, TV input or USB
input.
SOUNDSHARE
This section explains how to connect the Crystal
Surround Air Track to a Bluetooth compatible
SAMSUNGTV.
•
I
'
.,
-
'
~
..,
_:,;
~=
•
•"
I·.
Press an appropriate button on the remote control to select
a desired mode, or press (F.l to select one from:
D.IN, AUX, HDMI, BT, TV or USB mode.
•
• Connect
(<<
TV
>))
Press the (F.) button to select the TV mode, and then
connect the TV to the Crystal Surround Air Track.
•
•
The unit will play the TV's audio when it is connected
to the TV.
If you change to other mode except TV SoundShare
mode or turn it off, you will hear audio from the TV
again.
CJ='
Input mode
Display
Optical Digital input
D.IN
AUXinput
AUX
HDMI input
HOMI
BLUETOOTH mode
BT
TV mode
IV
USB mode
USB
The unit turns off automatically in the following
situations:
• BT!TV/USB/HDMIIARC/D.IN MODE: If there is no
audio signal for 20 minutes.
• AUX Mode: If no KEY input is entered for 8 hours
when the cable is connected. If the AUX cable is
disconnected for 20 minutes.
See page 17 of the user manual to the SoundShare.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement