PDF-datasheet van de Karren en trolleys voor engineers van het merk Treston en Sovella van de leverancier Sovella Human Workspace B.V..

PDF-datasheet van de Karren en trolleys voor engineers van het merk Treston en Sovella van de leverancier Sovella Human Workspace B.V..
DE DI C AT E D TO H U M A N WO R KS PAC E
About us
Dedicated to human workspace
4
Ergonomics in our workspaces
8
Decorating with colour
10
ESD protection
12
Workbenches and accessories
14
WB
18
Concept
26
MultiLine and FlexFlow
38
TP and TPH
40
Lighting
50
Lighting ergonomics
52
Magnifying light ZL3
53
HilLite, ProLite, SatelLite and Task light
54
Overlight OL 254 and sidelight SL224
55
Chairs
56
X-chairs
59
Saddle chairs
60
Foot rests
60
Accessories for chairs
61
Trolleys
62
Universal trolley WTR
66
Adjustable trolley TRTA
70
Multi trolley
67
Mobile workstation MLC
72
Basic trolley
69
Trolleys for additional workspace
73
Drawer units
74
Light steel cabinets LMC
79
Drawer units 30 and 35
79
Drawer unit 45
80
Drawer unit 75
82
Shelves and cabinets
84
Storage system and cabinets
88
Industrial cabinets
90
Shelf cabinets and light shelf cabinets
94
Small parts shelving
95
Industrial screens
96
Industrial office screen system
99
Perforated industrial screens
101
Perforated panels
102
Perforated panels
105
Panel hooks
106
4
Ergonomic workspaces product catalogue 2014-2015
For a Better Work Environment
Dedicated to
human workspace
Treston Group is among the world’s leading suppliers
of industrial furniture and workstations.
Our workstation design and implementation process
always begins with the person performing the work. In this
way, we pay close attention to ergonomics, functionality
and efficiency.
The four cornerstones of our operations are customerfocus, reliability, high quality and continuity. We listen to
your needs and reliably deliver high-quality and durable
solutions, which last from one generation to the next,
thanks to our optimal design.
Our own sales network and distributors dedicated to our
products provide worldwide assistance and service in
support of Treston Group products.
Ergonomic workspaces product catalogue 2014-2015
5
Industrial furniture and workstations for
different working environments
Treston Group’s product range is divided into three categories, a separate catalogue is available for each category.
Please contact our agents or email us at: [email protected] to get your own copy.
Ergonomic workstations
Swift in-house logistics
The seamless efficiency of material flows is emphasised in
assembly workstations.
Treston storage furniture encompasses both ease of
use and design. Our selection provides solutions to a
surprisingly broad range of storage challenges, regardless
of the users and sector.
Process changes in production or operations require
reconfigureable workstations that take account of
individual ergonomics requirements. Our modular product
solutions allow you to react to new situations and the
resulting needs in an agile manner, enabling smooth,
continuous operations. Thanks to our extensive selection
of accessories, we are able to satisfy even the most
individual of needs.
Our own design and years of experience enable us
to customise each solution to best suit its purpose. For
the needs of the electronics industry, we make ESDprotected workstations, suitable for furnishing EPAs.
These workstations are also highly suitable for precision
mechanics and mechanical engineering.
Distinctive workshops
6
Our plastic storage drawers are durable and easy to
clean, and can be customised into a complete storage
system if necessary. Our product range also includes
various stand and trolley solutions, for the more efficient
use of storage space and easier movement of stored
goods.
We also have storage furniture for environments that
require ESD protection. In addition, some of our storage
solutions are moulded from reprocessed plastic.
Packaging and shipping departments are often found at
the end of production processes. Their logistic efficiency
can be easily improved through sensible workstation
design.
Our workshop drawer cabinets, tool panels and
workbenches are designed to withstand heavy loads and
strenuous use in workshops, repair shops and industrial
environments.
A great deal of manual labour and quality assurance are
typical of the packaging stage, in both individual stations
and line solutions. Our solution for the needs of these
segments often builds on the idea of “more for less”.
The long lifetime of our furniture guarantees productivity
and a satisfied user. Our workshop furniture is also well
known in teaching environments.
When accessories are located and positioned according
to LEAN principles, you can significantly speed up
throughput and reduce work strain. Cutters, pens, knives,
rubbish bins and displays can be positioned in a way that
provides the user with the best possible ergonomics, while
also ensuring a free and uncluttered workspace.
Ergonomic workspaces product catalogue 2014-2015
Workstations for every need
Optimising workstation functionality may prove
difficult without well-chosen accessories that increase
usability. When a workstation is well-planned and
well-equipped, workflow becomes easier and more
efficient, improving ergonomics and making it easier
to keep tools in place.
Modular means adaptable
Our world keeps changing at an ever-increasing pace.
Until recently, products could be manufactured the
same way for decades, but now we must be prepared
to make changes to our work practices at a much faster
rate. In order to revise the production process to meet
new requirements, an extremely flexible and adaptable
workstation system is essential. Our system is designed
particularly with this in mind. The same basic units,
equipped with accessories that meet your needs, offer a
wide range of applications.
Customised for your application and
your operator
The purpose of a workstation determines its basic
requirements and accessories. The needs and requirements
may change considerably from one employee to another,
but we understand that no two people are alike. When
a workstation is equipped for and adjusted to an
individual’s needs, each phase of the production process
can be completed without delay, with accuracy and with
maximum comfort.
Treston Group offers a wide range of ergonomic
workstations to choose from, from those that can be
delivered quickly to those that provide versatile options to
meet any need.
Ergonomic workspaces product catalogue 2014-2015
7
Ergonomics in our workstations
Costs associated with health and safety problems are an
ever increasing concern to all industries. This concern drives
industries to seek solutions to provide a healthy, safe and
productive working environment. Designing a workplace
with ergonomics in mind improves the employees’
wellbeing which in turn improves productivity.
The modular design of Treston Group workstations
enables proper ergonomics. With a wide range of
accessories and adjustments we can provide customers
with a customized solution using standard components.
Modularity and accessories are individually adjustable
according to the task and operator requirements. The
aim is to create an uncluttered workstation and utilise the
available workspace as efficiently as possible.
Treston Group’s workstations and accessories can be
adjusted for operators of different heights working with left
or right hand. Correctly adjusted workstations decrease
stress in the muscles and enable productive work
throughout the shift.
Please do remember that ergonomy is not only adjusting
your chair. Real ergonomy has to do with proper lighting,
noise absorption, body movements and air quality. More
information about lighting ergonomics on page 52.
Location of the correct view angle
Focus point should follow these guidelines:
• Continual movement of view should be in 30
degree sector
• Continuous view angle should keep the head in a
comfortable position (line of view should be 10 to
40 degrees below the horizontal line)
• Displays should be posiotioned 20 degrees below
the horizontal line
8
Ergonomic workspaces product catalogue 2014-2015
Seated or standup work?
The choice of a seated or standing working position is
dependent upon the task to be executed. The height of
the work surface is determined by such factors as size
and weight of the part, precision requirement, assembly
process, repetitiveness etc.
When designing the work space for a seated operation
leg space requirements must be considered. The
recommended space should be at least 80 cm wide and
90 cm deep at floor level. For standing work, the required
space is much smaller.
Height adjustability is especially useful when the size
of the products being handled varies or when several
people use the same workstation.
min. depth 55 cm
men 75 - 90 cm
HEAVY
women 70 - 85 cm
LIGHT
women 85 - 90 cm
men 90 - 95 cm
women 95 -105 cm
men 100-110 cm
ACCURATE
leg space 90 cm
Standing work
Seated work
Reaching distances and heights
To improve working postures in assembly work, the
most-often used parts should be placed into the optimal
horizontal working area within the operator’s sight. Avoid
overly large or deep workbenches, which can cause
improper reach and reduced productivity. Assembly work
is most ergonomic when parts are within easy view and
reach.
The vertical work area and reach zone can be fine-tuned
with accessories. Our height adjustable arms optimize
work movements and keep parts or tools within easy
access. Operators can work with wrists and arms in
optimal posture with shoulders relaxed. Tilted bin rails and
shelves keep the wrist in a neutral position when picking
parts. The tilt angle also provides easy identification of the
parts with the proper viewing angle.
!
Lighting ergonomics, see page 52.
Ergonomic workspaces product catalogue 2014-2015
9
Decorating with colour
The working environment can also look good and be
inspirational. By choosing the colours of your equipment
to match your corporate colours, you can reinforce your
corporate image whilst creating a pleasant working
environment.
10
Ergonomic workspaces product catalogue 2014-2015
Doors, drawers and perforated panels all come in various
colours. The combination of different colours creates
an interesting effect. Colours can also act as codes or
identifiers.
Colour codes
Workbench, cabinet, shelving and drawer frames are all light grey (RAL 7038 or RAL 7035) or dark grey (RAL 7045).
Outside of the standard colour range, additional colours are available on request. Please contact our agents or email us
at: [email protected]
Colour
code
Light grey
RAL code
Doors
Drawers
Perforated panels
and back panels
RAL 7035
STD
A/STD
A/STD
Light grey *
35 & 41
RAL 7038
STD
A/STD
A/STD
Dark grey
45
RAL 7045
A
A
A
Blue
07
RAL 5007
STD
A/STD
STD
Red
25
RAL 3002
A
A
A
!
The colour code is included
in those product codes that
are formed with numbers.
It is either at the end, following the hyphen (e.g.
860 804-35), or in the middle (e.g. C 334 07
000).
*35 is ESD protected light grey, 41 is non-ESD protected light grey. Please remember that ESD
protection will result in a slightly darker shade of colour than the given RAL code.
STD = Standard factory colour, normal warehouse delivery, listed price
A = Factory colour, delivery 15 days from the factory, listed price
Light grey
RAL 7035
Light grey
RAL 7038
Blue
RAL 5007
Red
RAL 3002
Dark grey
RAL 7045
Printed colours do not give a fully accurate representation of painted colours. Please ask our agent about various samples.
Ergonomic workspaces product catalogue 2014-2015
11
ESD protection guarantees
a safe working environment
Particularly in the electronics industry, work is often
carried out in an EPA that is protected from static
discharge. Protection in this case means effective earthing,
which involves both earthing equipment and painting the
frame of the ESD workstation with semi-conductive paint.
We have extensive experience in developing,
manufacturing and supplying ESD furnishings. All our
workstations and related products are supplied with
an electrically semi-conductive coat of paint and we
supply furnishings, seats and earthing components for
ESD-protected workstations. We also build complete
production systems equipped with ESD-protection. Our
products meet the requirements specified in the IEC
61340-5-1 standard.
Static electricity
Adjustable
fabric
wristband
Ground
connection
cord
Ground
junction box
Spiral cord
Wristband
junction box
12
Ergonomic workspaces product catalogue 2014-2015
The abbreviation ESD stands for Electrostatic Discharge,
a process that occurs between two objects of differing
electric potential. Normally, electric charges are
discharged slowly from objects’ surfaces. If the difference
in electric potential becomes too great, the electrical
current accelerates resulting in a sudden current surge.
An ESD protected area is called an EPA. In an EPA, ESD
protection must be observed in all materials, employees’
clothing and air humidity. Workstations and employees in
an EPA must also be earthed with protective resistance (1
Mohm) to an ESD earth.
Our standards comply with
the highest certification requirements
Quality certification
Environmental Management System
certification
ISO 9001:2008
ISO 14001:2004
ESD-approval certification
GS certification
for lighting and TP workbench
Packaging treatment
according to EU directives.
IPA Qualification Certificate
The Concept workstation is suitable
for use in class 10.000 clean rooms
in accordance with US Federal
Standard 209E.
Our ESD products fulfill the basic
requirements of IEC 61340-5-1.
To obtain a copy of our certificates, please contact [email protected]
!
All our steel products have a 5-year warranty.
Ergonomic workspaces product catalogue 2014-2015
13
14
Ergonomic workspaces product catalogue 2014-2015
Workbenches and
accessories
Ergonomic workspaces product catalogue 2014-2015
15
Upright tube
300
C-profile upright
TP / TPH frame
Upright tube
CONCEPT frame
Aluminium upright
WB frame
200
KG
500
KG
KG
WB workbench, page 18
•
•
•
•
Ergonomic and easily adjustable
Suitable for use in demanding assembly environments
Adaptable to a large variety of tasks
Offering a wide range of accessories to meet any need
Concept workbench, page 26
•
•
•
•
Ergonomic and highly adaptable to the needs of the user
Easy to reconfigure thanks to the modular design
Suitable for heavy loads
Offering a wide range of accessories to meet any need
TP workbench, page 40
•
•
•
•
Steel structure
A cost-effective option to start with
Easy to equip with a variety of accessories
Concept accessories available
TPH workbench, page 45
• Available from stock
• Includes basic elements
• Provides its own selection of accessories
17
WB workbenches
The WB workbench has been designed for use in
demanding assembly environments. The concept is
one of simplicity and good ergonomics, allowing each
bench to be adapted to a variety of tasks.
WORKBENCHES WB
Electric motor, manual hand crank or allen key height
adjustment cater for standing or seated users, while the
generous worktop depth and broad accessory range
ensure that everything is within easy reach. Another feature
of this new design is the flush bench footprint; benches
can be placed side-by-side, back-to-back, or right up
against walls with no unnecessary gaps. You can design
your workstation to fit your needs perfectly.
18
Worktop height can be adjusted between 700-1100 mm.
The adjustment system in both cases utilises interlocking
aluminium profiles, providing a strong, rigid frame. Steel
frame parts are epoxy powder coated light grey paint,
RAL 7035. Worktops are of 25 mm laminated particle
board, adjustable feet are provided for fine levelling.
Ergonomic workspaces product catalogue 2014-2015
200
KG
2
years
GUARANTEE
• Ergonomic and easily adjustable
• Suitable for use in demanding assembly
environments
• Adaptable to a large variety of tasks
• Offering a wide range of accessories to
meet any need
WB benches examples
WB electric adjustable workbench
WB allen-key adjustable workbench
Qty
Name
Code
Qty
Name
Code
1
Electric adjustable bench
WB815 EL
1
Allen-key adjustable bench
WB811
1
Upright profiles
AL2X150 W
1
Upright profiles
AL2X110 W
1
Accessory frame
AKK150
1
Shelf
ALH110
1
Shelf
ALH150
1
Support bracket
HSB110
1
Support bracket
HSB150
1
Overlight
OL254
1
Adjustable shelf
ASH70
1
Adjustable shelf
ASH100
1
Swivel arm with tray
AKV400
1
Power channels
CJK
1
Overlight
OL254
1
Power channels
CJK70 SET
2
Bin profile
BP70
1
LCD bracket
MA
1
Light steel cabinet
LMC02
WB allen-key adjustable workbench ESD
Qty
Name
Code
Qty
Name
1
Electric adjustable bench
WB815 EL ESD
1
Allen-key adjustable bench
WB815 ESD
1
Upright profiles
AL2X150 W
1
Upright profiles
AL2X150 W
1
Accessory frame
AKK150
1
Accessory frame
AKK150
1
Shelf
ALH150 ESD
1
Shelf
ALH150 ESD
2
Adjustable shelf
ASH70 ESD
1
Support bracket
HSB150
1
Overlight
OL254
1
Adjustable shelf
ASH70 ESD
1
Perforated panel
ARL70
1
Power channels
CJK SET
2
Sidelight
SL224
Code
Ergonomic workspaces product catalogue 2014-2015
WORKBENCHES WB
WB electric adjustable workbench ESD
19
WB workbench
700-1100 mm
• Select the height adjustment method: allen-key,
electric or crank.
• Stepless height adjustment between 700-1100 mm.
• Select a bench top to suit the frame: laminate or ESD
bench top.
700-1100 mm
WB allen-key adjustable bench
Bench size W x D mm
Max load kg
Code
Code ESD
1073 x 800
250
WB811
WB811 ESD
1500 x 800
250
WB815
WB815 ESD
1800 x 800
250
WB818
WB818 ESD
WB electric adjustable bench
Bench size
W x D mm
Max load kg
Code
Code ESD
1073 x 800
200
WB811 EL •
WB811 EL ESD •
1500 x 800
200
WB815 EL
WB 815 EL ESD
1800 x 800
200
WB818 EL
WB818 EL ESD
Adjustment speed using the motor is 19 seconds min. to max.
700-1100 mm
Cable tidy as standard.
WB crank adjustable bench
Bench size W x D mm
Max load kg
Code
Code ESD
1073 x 800
200
WB811 C •
WB811 C ESD •
1500 x 800
200
WB815 C
WB815 C ESD
1800 x 800
200
WB818 C
WB818 C ESD
Cable tidy as standard.
• = non stock item
Laminate bench top
WORKBENCHES WB
•
•
•
20
25 mm low pressure laminate
Light grey surface
Plastic edging
ESD bench top
•
•
•
•
•
Grey laminate surface
Grey edging
Thickness 25 mm
CTR trolley
Height adjustment with allen key between 690990 mm. A lower shelf is integrated. Swivel castors
(Ø 100 mm), two of which have brakes. Dimensions 700
x 500 mm, lower shelf 700 x 415 mm.
Fixed with screws
Semi-conductive (ESD)
Ergonomic workspaces product catalogue 2014-2015
Size W x D mm
Max load kg
Code
Code ESD
700 x 500
75 / shelf
CTR705
CTR705 ESD
WB extension benches
1. WB side worktop
2. WB corner worktop
This side worktop can be installed on either the right or left
hand side of an WB bench to increase the surface area.
Installation can be either at the same height, or lower
than the main worktop with the brackets provided. Load
capacity is 50 kg, and it is suitable for all WB models in the
range.
A corner worktop can be used with two WB benches to
create a 90° angle setup. This unit consists of a worktop
and all necessary components. It requires no additional
leg frames, simply mounting to the standard benches with
the brackets provided. Load capacity for this worktop is
50 kg. Suitable for WB EL to order.
Size W x D mm
Max load kg
Code
Code ESD
Size W x D mm
Max load kg
Code
Code ESD
800 x 400
50
WB804 ST
WB804 ST ESD
1154 x 1154
50
WB1212 CT
WB1212 CT ESD
WB811
0
50
WB1212 CT
1073
WB811
1
2
800
Ergonomic workspaces product catalogue 2014-2015
WORKBENCHES WB
1153
1153
800
1073
21
Accessories for WB
Upright profiles AL2X
Size W x H mm
Suitable for
Code
Code ESD
1063 x 900
WB811
AL2X110 W
AL2X110 W
1489 x 900
WB815
AL2X150 W
AL2X150 W
1789 x 900
WB818
AL2X180 W
AL2X180 W
Needed for mounting accessories to WB benches. Includes 2 vertical and 1
horizontal profile. With 3 cable clips (CC8).
Upright profiles AL2X
Accessory frame AKK
Accessory frame AKK
Size W x D mm
Suitable for
Code
Code ESD
730 x 540
AL2X150 W
AL2X180 W
AKK70
AKK70
690 x 500 +
690 x 500
AL2X150 W
AKK150
AKK150
690 x 500 +
990 x 500
AL2X180 W
AKK180
AKK180
The accessory frame divides the space between the upright profiles into 2
modules. AKK frame includes 1 vertical and 1 horizontal profile. Useable
height 500 mm.
Shelf ALH
Shelf ALH
Size W x D mm
Suitable for
Code
Code ESD
1073 x 310
AL2X110 W, combination
AL2X180 W + AKK180
ALH110
ALH110 ESD
1500 x 310
AL2X150 W
ALH150
ALH150 ESD
1800 x 310
AL2X180 W
ALH180
ALH180 ESD
Height adjustable shelf. 25 mm laminated particle board. Load capacity 50
kg. Mount on upright profiles.
Lower shelf AT
WORKBENCHES WB accessories
Size
W x D mm
Lower shelf AT
Suitable
for
Code
Code ESD
828 x 400 •
50
WB811
AT110 WB
AT110 WB ESD
1255 x 400 •
50
WB815
AT150 WB
AT150 WB ESD
1555 x 400 •
50
WB818
AT180 WB
AT180 WB ESD
Height adjustable lower shelf, 25 mm laminated particle board. Mount
between the legs.
• = non stock item
Backstop LIST
Backstop LIST
22
Max
load kg
Ergonomic workspaces product catalogue 2014-2015
Size
W x D x H mm
Suitable
for
Code
1400 x 52 x 27
ALH150, AT150 WB,
AT150 TPH
LIST150
1700 x 52 x 27
ALH180, AT180 WB,
AT180 TPH
LIST180
Prevents items from falling off the shelf. Can be fixed on the lower shelf AT or
on the shelf ALH.
Divider hoops PDH
Height mm
Suitable for
Code
330
ALH
PDH
Used in combination with shelf ALH. Comes in sets of 5.
Perforated panel ARL
Size
W x H mm
Suitable for
Code
Code ESD
668 x 500
AKK70, AKK150
ARL70
ARL70
968 x 500
AKK180
ARL100
ARL100
Divider hoops PDH
Mount on accessory frame AKK. The size of the perforation is 9 x 9 mm,
center to center 38 mm.
Perforated panel ARL
Adjustable shelf ASH
Size W x D mm
Suitable for
Code
Code ESD
660 x 400
AKK70, AKK150,
AKK180
ASH70
ASH70 ESD
960 x 400
AKK180
ASH100
ASH100 ESD
Continuous adjustment for depth, height and angle. Shelf of 25 mm
laminated particle board. Lipped front edge. Load capacity 35 kg static
load. Mount on accessory frame AKK.
Adjustable shelf ASH
Bin profile BP
Length mm
Suitable for
Code
Code ESD
685
AKK 70, AKK150,
AKK180
BP70
BP70 ESD
985
AKK180
BP100
BP100 ESD
Aluminium profile for stacking and picking bins. Mount on accessory frame
AKK.
Bin profile BP
Swivel arm with tray AKV
Size W x D mm
Suitable for
Code
Code ESD
460 x 210 (tray)
AL2X upright
profiles
AKV400
AKV400 ESD
Lockable, angle adjustable steel tray with swivel radius of 360°. Length of
swivel arm 590 mm. Max. load 15 kg.
Size
W x D x H mm
Suitable
for
Shelves
number
Code ESD
455 x 200 x 290
AKV
3
EPL12 ESD
Rack with three fixed shelves. Semiconductive epoxy powder coated steel in
light grey (RAL 7035). Bins ordered separately, page 36.
Component rack holds:
•
12 stacking bins 1015-4ESD or 12 picking bins 30-1L-4ESD or 6 picking bins 30-2L-4ESD or 6 picking bins 30-23L-4ESD.
Component rack EPL
Document stand WDA
Size W x H mm
Suitable for
Code
Code ESD
440 x 300
AL2X upright
profiles
WDA
WDA ESD
Document stand A3 with swivel arm. Epoxy powder coated steel: light grey.
Arm length 220 mm. Tilt 75°.
WORKBENCHES WB accessories
Swivel arm with tray AKV
Component rack EPL
Document stand WDA
Ergonomic workspaces product catalogue 2014-2015
23
Bottle holder CH
Size W x D x H mm Ø mm
Suitable for
Code
Code ESD
110 x 105 x 120
AL2X upright
profiles
CH
CH
Ø 80
Practical holder for bottle or cup. Made of black polypropylene.
Bottle holder CH
Recycling material bin PRMB
Size
W x D x H mm
Suitable for
Code
530 x 280 x 585
WB benches
PRMB2
530 x 280 x 585
TP benches
PRMB
The 60 ltr bin with steel brackets has a maximum load of 15 kg and can be
positioned on either side or rear of the bench.
Recycling material bin PRMB
Tool holder box PPH
Size
W x D x H mm
Suitable for
Code
Code ESD
400 x 300 x 140
WB and TP benches
PPH TXL
PPH TXL
186 x 500 x 182
WB and TP benches
PPH-TL
PPH-TL
PPH TXL with two plastic bins type 3020 and the PPH-TL with one red plastic
bin type 1950.
Tool holder box PPH
Tool tray PTH
Size
W x D mm
Suitable for
Code
1000 x 60
WB benches
PTH100
The tool tray guarantees a clean working space, while tools are close to
hand.
Tool tray PTH
WORKBENCHES WB accessories
Support bracket HSB
Support bracket HSB
Suitable for
Code
Code ESD
AL2X110 W
HSB110
HSB110
1500
AL2X150 W
HSB150
HSB150
1800
AL2X180 W
HSB180
HSB180
Support bracket of steel for suspending power tools and lighting units.
Mount on upright profiles.
Cable tidy WBCT
Size W x D x H mm
Suitable for
Code
Code ESD
948 x 64 x 204 •
WB811
WBCT110
WBCT110
1375 x 64 x 204
WB815
WBCT150
WBCT150
1675 x 64 x 204
WB818
WBCT180
WBCT180
Mount on leg frame. A cable tidy is standard equipment on WB C and WB
EL models.
Cable tidy WBCT
24
Length mm
1073
Ergonomic workspaces product catalogue 2014-2015
• = non stock item
Cable clip set CC
Set
Suitable for
Code
Code ESD
5 pieces
AL2X upright
profiles
CC8
CC8
The cable clip set will hold cables etc. securely and neatly in place along
the bench frame. The clips locate in the 8 mm profile slot.
Cable clip set CC
Keyboard shelf WKA
Size W x D mm
Suitable for
Code
Code ESD
500 x 220 (shelf)
AL2X upright
profiles
WKA
WKA ESD
Keyboard shelf with swivel arm. Epoxy powder coated steel. Load capacity
15 kg. Arm length 220 mm.
PC stand CPU
Width
130240 mm
340460 mm
Height
395500 mm
180285 mm
Suitable for
WB and TP/TPH
benches
SAP, CTR, WTR
trolleys
Code
CPU
Code ESD
CPU
Keyboard shelf WKA
An adjustable holder for either vertical or horizontal CPU, to mount underneath the table worktop.
LCD bracket MH
Max
load kg
15
Suitable for
Code
Code ESD
AL2X upright profiles
MH
MH
PC stand CPU
The quick-release mechanism is equipped with the standard used flat-screen
mount 75 x 75 and 100 x 100 for the mounting of all normal flat-screens.
LCD swivel arm MA
Max
Suitable for
Code
Code ESD
load kg
10
AL2X upright profiles
MA
MA
The quick-release mechanism is equipped with the standard flat-screen mount
75 x 75 and 100 x 100 for the mounting of all normal flat-screens. The arm
is double articulated, turns through a radius of 180° and will extend between
95-425 mm from the upright.
LCD bracket MH
LCD swivel arm MA2
LCD swivel arm MA
Power channels CJK
Dims mm
Suitable for
Code
Profile 631
AL2X upright profiles
CJK70
Profile 931
AL2X upright profiles
CJK100
3 double sockets (E1) and a switch (E2)
CJK70 SET
Double socket
E1
Switch
E2
Automatic fuse 10 A
E3
Automatic fuse/earth leakage switch 10 A/30 mA
E4
Emergency-stop-switch
E5
Data connector/shielded for Cat.6 cable
E6
Data connector/without screen for Cat.5 cable
E7
Pneumatic, quick coupling 3/8”
E8
Can be fitted with a choice of components, ordered separately. All meet with
CE requirements. 3 m cable is included. Supplied wired and ready for use. A
finished CJK 70 SET includes 3 double sockets (E1) and a switch (E2). Other
sets are also available.
LCD swivel arm MA2
WORKBENCHES WB accessories
Max
Suitable for
Code
Code ESD
load kg
15
AL2X upright profiles
MA2
MA2
The quick-release mechanism is equipped with the standard, widely used
flat-screen mount 75 x 75 and 100 x 100 for the mounting of all normal flatscreens. The arm is double articulated, turns through a radius of 180° and will
extend between 95-425 mm from the upright.
CJK70 SET
Ergonomic workspaces product catalogue 2014-2015
25
Concept workbenches
WORKBENCHES CONCEPT
Concept workbenches are designed for the needs of
the electronics industry, where ergonomic qualities
are the most important requirement. There are many
possible adjustments, all components fit together
seamlessly, and each detail is practical in use.
26
500
KG
2
years
GUARANTEE
• Ergonomic and highly adaptable to the
needs of the user
The workstation adapts to the work process and the needs
of the operator. As a result all movements of the operator
can be optimised, which in turn increases performance
and productivity and decreases work-related stress.
• Flexible to changes thanks to the modular
design
Modular design provides total integration with the existing
system and the potential to flexibly adapt to changes in the
environment. Concept workbenches are typically used in
work such as assembly, quality control, and repair.
• Offering a wide range of accessories to
meet any need
Concept workbenches are also available in motorised
and hand crank versions.
Ergonomic workspaces product catalogue 2014-2015
• Suitable for heavy loads
Concept workbench examples
Concept workbench Code C 100 41 037
Name
1
Frame
1
Laminate bench top
Code
Qty
Name
Size mm
Code
1500 x 750
100 35 032
1
Frame
1500 x 750
103 35 032
1500 x 750
860 029-69
1
Laminate bench top
1500 x 750
860 029-69
Size mm
Concept crank adjustable bench Code C 101 41 037
Size mm
Concept workstation Code C 100 41 207
Qty
Name
Size mm
Code
Qty
Name
1
Frame
1500 x 750
101 35 032
1
Frame
1500 x 750
100 35 032
1
Laminate bench top
1500 x 750
860 029-69
1
Laminate bench top
1500 x 750
860 029-69
The Concept bench
can be equipped
with castors!
Code
1
Upright module
2 x M750
903 35 001
1
Drawer unit 30/15
300 x 454 x 150
859 330-35
1
Fixing set
860 930-35
1
Bar Concept
1500
860 088-35
1
Footrest, bar
550 x 350
860 136-35
1
Light/balancer rail
2 x M750
918 35 006
1
Light HiLite 54
1230
861 954-00
2
Adjustable shelf
720 x 505
920 41 005
2
Perforated back panel
861 511-35
1
LCD-holder
930 35 002
1
Energy rail
440
910 51 001
2
Bin rail
M750
859 151-35
14
Stacking bins
1015-5
WORKBENCHES CONCEPT
Qty
Concept electric adjustable bench Code C 103 41 037
Castor set Ø100 ESD Code 860 429 -00
Castor set Ø100 Code 834 734 -00
Load capacity with castors 300 kg.
Ergonomic workspaces product catalogue 2014-2015
27
Designing Concept workstation
00
6, 20
• Select the bench frame and the height adjustment
method: allen key, crank or electric.
• Select a bench top to suit the frame: laminate or ESD bench top.
670-1120 allen-key
675-1025 crank
700-1100 electric
600
, 75
0, 9
00
0, 1
, 120
1000
180
500,
Concept workbench frame
Workbench
frame size
W x D mm
Bench frame,
allen key
Bench frame
max load kg
Bench frame,
crank adjustable
Bench frame
max load kg
Bench frame
max load kg
Code
Code
Code
Bench frame,
electric adjustable
1000 x 600 •
1000 x 750
100 35 015
100 35 030
200
500
101 35 015
101 35 030
200
200
103 35 015
103 35 030
300
300
1200 x 600 •
1200 x 750
100 35 016
100 35 031
200
500
101 35 016
101 35 031
200
200
103 35 016
103 35 031
300
300
1500 x 600 •
1500 x 750
100 35 017
100 35 032
200
500
101 35 017
101 35 032
200
200
103 35 017
103 35 032
300
300
1800 x 600 •
1800 x 750
100 35 018
100 35 033
200
500
101 35 018
101 35 033
200
200
103 35 018
103 35 033
300
300
2000 x 600 •
2000 x 750
100 35 019
100 35 034
200
500
103 35 019
103 35 034
300
300
Bench height
steplessly adjustable
670 - 1120 mm
675 - 1025 mm
700 - 1100 mm
WORKBENCHES CONCEPT
Concept bench tops
Size W x D mm
Code
Code ESD
Laminate bench top -69
1000 x 600 •
860 026-69
TT10060-ESD
•
•
•
Light-grey, speckled laminate surface
1000 x 750
860 590-69
TT10075-ESD
Plastic edging
1000 x 900 •
860 593-69
TT10090-ESD
1200 x 600 •
860 027-69
TT12060-ESD
1200 x 750
860 554-69
TT12075-ESD
1200 x 900 •
860 594-69
TT12090-ESD
1500 x 600 •
860 028-69
TT15060-ESD
1500 x 750
860 029-69
TT15075-ESD
Thickness 25 mm
ESD bench top
•
•
•
•
•
1500 x 900
860 031-69
TT15090-ESD
Grey laminate surface
1806 x 600 •
860 580-69
TT18060-ESD
Grey edging
1806 x 750
860 030-69
TT18075-ESD
Thickness 25 mm
1806 x 900
860 032-69
TT18090-ESD
Fixed with screws
2000 x 600 •
860 591-69
TT20060-ESD
2000 x 750
860 592-69
TT20075-ESD
2000 x 900
860 033-69
TT20090-ESD
Semi-conductive (ESD)
750 mm deep frames are used with 900 mm deep bench tops.
• = non stock item
28
Ergonomic workspaces product catalogue 2014-2015
900 mm deep bench tops
The extension part 860 634-35 should be used with 900
mm deep bench tops to ensure stability when handling
objects heavier than 50 kg on the bench. It is fixed
between bench legs and rear case. 2 pieces needed/
bench.
Transport skate
With a transport skate, one person can easily move
benches. For long-distance moving, you will need two
transport skates.
Name
Max load kg
Code
Code ESD
Transport skate •
180
854 061-41
854 061-35
Compatible with tables with a max depth of 750 mm.
• = non stock item
Colour stripes
You can add colour to the sides of Concept bench legs
with plastic stickers. There are four standard colours: blue,
green, red and yellow. Colour stripes are not included in
the bench frame packs.
Name
Size mm
Colour
Code
Colour stripe pair
530 x 80
green
860 850-00
Colour stripe pair
530 x 80
red
860 851-00
Colour stripe pair
530 x 80
yellow
860 852-00
Colour stripe pair
530 x 80
blue
860 853-00
Concept extension benches
3
1. Workbench frame,
2. Extension bench frame
3. Corner bench frame
Concept corner bench frame (right)
Concept extension bench frame (right)
Name
Size W x D mm
Code
Corner bench frame for a
standard bench 600 mm deep •
1000 x 600
111 35 001
Corner bench frame for a
standard bench 750 mm deep •
1200 x 600
111 35 002
Name
Size W x D mm
Code
Extension bench frame •
1500 x 600
112 35 001
Extension bench frame •
1500 x 70
112 35 002
Extension bench frame •
1806 x 750
112 35 003
• = non stock item
!
WORKBENCHES CONCEPT
2
1
The W x D x H rule
All our dimensions follow a WDH rule, where the first dimension is the
width (W), the middle the depth (D), and the last the height (H).
Ergonomic workspaces product catalogue 2014-2015
29
Accessories for Concept
These accessories also suit TP benches (NOTE! Not TPH benches).
Straight bracket
Corner bracket
Horizontal tube
Upright tube
Upright tubes
Accessories are attached to the Concept bench with the
aid of upright tubes or a pre-assembled, upright tube
module. The module includes upright tubes, horizontal
tube/tubes, corner bracket pair and straight bracket (if
module has more than one horizontal tube). The tubes or
the module are attached to the back of the bench.
h=
l=
Upright tubes
Name
Size
W x D mm
Length (l) mm Code
Upright tube
30 x 60
500
860 991-35
Upright tube
30 x 60
800
860 142-35
Upright tube
30 x 60
996
860 367-35
Upright tube
30 x 60
1359
860 024-35
Upright tube
30 x 60
1582
860 025-35
Horizontal tube
M500
860 819-35
Horizontal tube
M750
847 402-35
Horizontal tube
M900
840 104-35
Corner bracket pair
848 336-35
Straight bracket
851 827-35
Upright tube modules and compatibility
WORKBENCHES CONCEPT accessories
Code
Code
Suitable for bench widths
l =1359 mm l =1582 mm
C = Concept
1000 1200 1500 1800 2000 h =1075 mm h =1300 mm
1 x M750 C
C/TP C
C
C
900 35 001 900 35 002
1 x M900 C
C/TP C
C
C
901 35 001 901 35 002
2 x M500 C
C
2 x M750
902 35 001 902 35 002
C/TP C
2 x M900
3 x M500
The modular (M) size refers to the distance between two
upright tubes from the middle of the tube. The modular
size is used to find the appropriate accessories.
4 x M500
C
C
903 35 001 903 35 002
C/TP C
904 35 001 904 35 002
C
C
905 35 001 905 35 002
C
906 35 001 906 35 002
h = module's height measured from Concept bench's top surface.
Aluminium bracket
Name
Code
Aluminium bracket
846 554-00
A separate aluminium bracket (846 554-00) can
be used to attach a single tube to any bench.
30
Ergonomic workspaces product catalogue 2014-2015
Light and balancer rail (includes one sliding piece)
Modular size
Width of the front Max load kg
profile mm
Code
2 x M500
1000
15
918 35 001
2 x M500/1500
4 x M500
M750
M750/1500
2 x M750
3 x M750
M900
2 x M900
M900/1500
M1200
M1350
1500
2000
750
1500
1500
2250
900
1800
1500
1200
1350
15
15
15
15
15
15
15
15
15
15
15
918 35 002
918 35 003
918 35 004
918 35 005
918 35 006
918 35 012
918 35 007
918 35 008
918 35 009
918 35 010
918 35 011
Width of th
e front profil
e 1500 mm
Modular size M750
Width of the
front
Apart from task lights all luminares are fitted to light/balancer rails which are
height and depth adjustable. Tool balancer rails and sliding pieces faciliate
the use of heavy equipment. A tool balancer is fixed to the light/balancer rail.
profile 1500
mm
Modular size 2 x M750
Tool balancers and other supplies
Tool weight kg
Code
Tool balancer 2DU
Tool balancer 4DU
Sliding piece
0,5 - 1
1-2
939 502-00
939 503-00
940 453-00
Tool balancer
Sliding piece
WORKBENCHES CONCEPT accessories
Name
Ergonomic workspaces product catalogue 2014-2015
31
Energy rails (brackets for uprights included)
1
2
4
Width mm fixing
Code
1
440
8 sockets + on/off switch
910 51 001
2
440
6 sockets + fault current protection
910 51 002
3
M750
6 sockets + on/off switch
911 51 002
M900
7 sockets + on/off switch
911 51 003
Bracket pair for perforated panel
853 185-51
Energy rails are available in three module sizes: M500, M750 and M900.
Distributor for compressed air
3
Connections, Ø 8 mm
In
Out Fixing
4
1
2
Distributor for compressed air
Code
horiz./vert. 859 861-00
Connectors are compatible with the CEJN 3200 series.
Can be fitted to all Treston Group benches with upright tubes.
Cable ducts
Tailor-made solutions also available
Name
Size W x H mm
Suitable for module
Code
Cable duct
467 x 360
M500
860 808-35
Cable duct
717 x 360
M750
860 044-35
Cable duct
870 x 360
M900
860 045-35
Fitted to upright tube.
Cable ducts hide the untidy cables from other equipment. This makes it easy to
keep the back of the workstation and its surroundings tidy.
Cable troughs
Name
Size
W x D x H mm
Horizontal cable trough 737 x 97 x 45
WORKBENCHES CONCEPT accessories
Code
M750
854 553-35
Horizontal cable trough 890 x 97 x 45
M900
854 554-35
Horizontal cable trough 1187 x 97 x 45
M1200
854 555-35
Horizontal cable trough 1487 x 97 x 45
M1500
854 556-35
Horizontal cable trough 1793 x 97 x 45
M1800
Vertical cable trough
Hide wires and cables with a cable duct.
Suitable
for module
52 x 62 x 1360
854 557-35
861 130-35
Horizontal troughs effectively conceal the cables, without preventing
maintenance access.
Fitted to upright tubes, the horizontal cable trough enables
cables to be hidden at the top of the workstation.
The vertical cable trough is fitted
on the side of the upright tube.
32
Ergonomic workspaces product catalogue 2014-2015
Shelves M500
Name
Suitable for
module
Size
W x D mm
Max
load kg
Code
Steel shelf
M500
490 x 300
50
860 804-35
Steel shelf
M500
490 x 400
50
860 805-35
Adjustable shelf •
M500
470 x 505
100
920 35 001
Adjustable shelf •
Adjustable shelf,
stepless depth adjustment •
Adjustable shelf, stepless depth
adjustment •
Document shelf (tilting 10-75°)
M500
M500
470 x 650
470 x 505
100
50
920 35 002
920 35 003
M500
470 x 650
50
920 35 004
M500
470 x 265
5
860 806-35
Name
Suitable for
module
Size
W x D mm
Max
load kg
Code
Steel shelf
M750
740 x 300
50
836 028-35
Steel shelf
Shelves M750
Steel shelf
M750
740 x 400
50
852 770-35
Adjustable shelf
M750
720 x 505
100
920 35 005
Adjustable shelf
Adjustable shelf,
stepless depth adjustment
Adjustable shelf, stepless depth
adjustment
Extendable shelf •
Document shelf (tilting 10-75°)
M750
M750
720 x 650
720 x 505
100
50
920 35 006
920 35 007
M750
720 x 650
50
920 35 008
M750
M750
720 x 390
720 x 265
30
5
925 35 002
860 115-35
Name
Suitable for
module
Size
W x D mm
Max
load kg
Code
Steel shelf
M900
890 x 300
50
852 283-35
Steel shelf
M900
890 x 400
50
852 769-35
Adjustable shelf
M900
870 x 505
100
920 35 009
Adjustable shelf
Adjustable shelf,
stepless depth adjustment
Adjustable shelf, stepless depth
adjustment
Extendable shelf •
Document shelf (tilting 10-75°)
M900
M900
870 x 650
870 x 505
100
50
920 35 010
920 35 011
M900
870 x 650
50
920 35 012
M900
M900
870 x 390
870 x 265
30
5
925 35 003
860 399-35
Adjustable shelf
Steplessly adjustable shelf
Shelves M900
Shelves M1200
Extendable shelf
Document shelf
Shelves M1500
Name
Suitable
Size
for module W x D mm
Max load
kg
Code
Steel shelf •
M1200
1167 x 300
80
854 480-35
Steel shelf •
M1500
1467 x 300
80
854 481-35
Steel shelf •
M1200
1167 x 400
80
854 483-35
Steel shelf •
M1500
1467 x 400
80
854 484-35
Max load
kg
Code
Suitable for Size
module
W x D mm
Max load
kg
Code
Shelves M1800 + corner shelf
Name
Suitable
Size
for module W x D mm
Max load Code
kg
Name
Suitable
Size
for module W x D mm
Steel shelf •
M1350
1340 x 300
50
860 787-35
Steel shelf •
M1800
1773 x 300
80
854 482-35
Steel shelf •
M1350
1340 x 400
50
860 788-35
Steel shelf •
M1800
1773 x 400
80
854 485-35
Adjustable shelf • M1350
1320 x 505
100
920 35 013
Corner shelf•
1318 x 400
80
854 479-35
Adjustable shelf • M1350
1320 x 650
100
920 35 014
Divider pair for shelves M500, M750 and M900
Name
Size W x D mm
Code
Divider pair
285 x 190
010 004-35
Divider pair
385 x 190
010 005-35
WORKBENCHES CONCEPT accessories
Shelves M1350
Name
Divider pair for shelves M1200, M1500 and M1800
Name
Size W x D mm
Code
Divider pair
285 x 190
861 116-35
• = non stock item
Ergonomic workspaces product catalogue 2014-2015
33
Adjustable auxiliary shelf
Name
Size W x D mm
Tilting
Max load kg
Code
Adjustable auxiliary top
560 x 340
0-25°
15
927 41 001 927 35 001
Adjustable auxiliary top
605 x 405
0-25°
15
927 41 002 927 35 002
Code ESD
Adjustable auxiliary shelf
IT shelves and trays
Monitor shelf & keyboard tray
Name
Size W x D mm
Max load kg
Code
Monitor shelf with arm
365 x 365
25
930 35 001
Keyboard tray for monitor shelf •
480 x 270
5
860 904-35
Keyboard and mouse tray for monitor shelf
620 x 270
5
860 903-35
15
930 35 002
Keyboard tray for LCD holder
480 x 260
5
860 941-35
Keyboard and mouse tray for LCD holder
620 x 260
5
860 942-35
Keyboard tray (attached to the bench top)
630 x 400
10
925 35 001
LCD holder with double arm
• = non stock item
LCD-holder & keyboard tray
Keyboard tray
Document holders
Name
Size W x D mm
Max load kg
Code
Document holder A4
290 x 330
5
928 35 008
Document holder A3
418 x 330
5
928 35 009
Replacement arms (spare parts)
Name
Length mm
Max load kg
Code
Double arm, 40 mm
200+200
10
880 020-35
Double arm, 60 mm
200+200
15
880 010-35
Heavy arm, 60 mm
287+221
30
860 993-35
Height-adjustable arm with gas spring, 60 mm
375
15
860 985-35
15
860 997-35
Height-adjustable profile
WORKBENCHES CONCEPT accessories
Document holder
Double arm
!
Heavy arm
Height-adjustable arm
When a position changes, the height
must be adjusted
Frequent changes in the working position, such
as changing from a sitting position to a standing
position, require height-adjustable arm (860 98535). The height-adjustable profile (860 997-35)
can be attached to any rack with arm (such as the
PC rack) that is pulled down and lifted back up
according to the working position. The adjustment
range is 450 mm.
Height-adjustable
profile
Auxiliary top, fixed brackets
Name
Ergonomic workspaces product catalogue 2014-2015
Max load kg
Code
Code ESD
Auxiliary top left
400 x 500
40
926 41 001
926 35 001 •
Auxiliary top right
400 x 500
40
926 41 002
926 35 002 •
• = non stock item
34
Size
W x D mm
Trays
Name
Size W x D mm
Max load kg
Code
Equipment tray
250 x 250 x 90
10
928 35 001
Equipment tray
500 x 250 x 125
15
928 35 002
Equipment tray *
500 x 250 x 125
30
928 35 003
Bin shelf
560 x 175 x 125
15
928 35 005
Bin shelf •
600 x 220 x 125
15
928 35 006
Stand for picking bins** •
560 x 165 x 355
931 35 000
Equipment tray
*Comes with heavy arm.
**Space for 15 picking bins 30-1L-4ESD
• = non stock item
Bin rails with arms
Name
Size W x D mm
Max load kg
Curved bin rail with arm
770 x 54
15
Extension for curved bin rail with arm
770 x 54
Code
929 35 002
Bin shelf
860 911-35
Tool panel
Name
Size W x D mm
Max load kg
Code
Tool panel
267 x 305
5
928 35 010
Stand for stacking bins
Rotating tool panels
Name
Size W x D mm
Max load kg
Rotating tool panel, height-adjustable arm
513 x 320
15
860 864-35
Rotating tool panel, double arm
513 x 320
15
880 865-35
Perforated panel
470 x 300
Tool trough M500
470 x 150
Bin rail M500
492 x 90
50
860 811-35
Light bin rail M500
492 x 54
10
860 953-35
Plastic bins, hooks and tools in
pictures are not included.
860 951-35
860 952-35
Rotating tool panel with M500 perforated panel, M500 bin rails and 8
plastic ESD bins
!
Curved bin rail with extension rail
Tool panel
WORKBENCHES CONCEPT accessories
Rotating tool panel with perforated
panel and R-hooks
Code
Rotating tool panel
The rotating tool panel can be equipped with perforated panels
and tool troughs. The rotating tool panel is compatible with all
M500 accessories, such as the tool trough and the bin rails.
Other supplies
Name
Code
Bottle holder (Ø 100) for upright tube
859 063-35
Roll holder for upright tube
(roll ø height 150 mm, width 175 mm)
860 841-35
Bottle holder
Roll holder
Ergonomic workspaces product catalogue 2014-2015
35
Bin rails
Extension bracket pair
Name
Suitable for Size
module
W x D mm
Max
load kg
Code
Bin rail
M500
492 x 100
50
859 150-35
Light bin rail *
M500
492 x 54
10
860 953-35
Bin rail
M750
742 x 100
50
859 151-35
Light bin rail *
M750
742 x 54
10
860 955-35
Bin rail
M900
895 x 100
50
859 152-35
Light bin rail *
M900
895 x 54
10
860 956-35
Bin rail
M1350
1343 x 100 50
859 153-35
Bin rail
M1500
1493 x 100 50
859 154-35
Bin rail
M1800
1799 x 100 50
859 155-35
60
860 919-35
Extension bracket
pair
Bin rail M750 with brackets and blue stacking bins.
50
*Suitable only for picking bins 30-1L, 30-2L and 30-23L.
Another way of ensuring an ergonomic working position and saving space is
to use bin rails. The higher the stacks are, the further they are from the workstation. To ensure an ergonomic working position, use extension bracket pair on
the top. The bin rails are available in six standard module sizes.
Light bin rail M750 with brackets and red stacking bins.
Stacking bins
No.
1
2
Capacity
l
Labels and cross dividers
Outer dims
W x D x H mm
Inner dims
W x D x H mm
Pack
pcs
Code.*
blue
Code.*
red
Code.*
ESD black
Labels +
shields
Pack min.
order
Cross
divider
1,0
105 x 165 x 75
90 x 105 x 65
60
1015-6
1015-5
1015-4 ESD
E10
60
3,6
149 x 250 x 130
125 x 185 x 115
30
1525-6
1525-5
1525-4 ESD
E15
30
V-14
6,5
186 x 300 x 156
155 x 230 x 140
24
1930-6
1930-5
1930-4 ESD
E20
24
V-19
8,7
186 x 400 x 156
155 x 330 x 140
24
1940-6
1940-5
1940-4 ESD
E20
24
V-19
1,0
99 x 160 x 70
85 x 100 x 62
60
30-1L-6
30-1L-4 ESD
1,7
1,7
198 x 160 x 70
198 x 160 x 70
175 x 100 x 62
175 x 100 x 62
(2 fixed length dividers)
30
30
30-2L-6
30-23L-6
30-2L-4 ESD
30-23L-4 ESD
*) Order number/one item. All bins are also available in grey colour.
1
WORKBENCHES CONCEPT accessories
Fixing stacking bins on the bin rail
Bin rail
M500
M750
M900
M1350 M1500 M1800 Curved
bin rail
1015
4
7
8
12
14
17
1525
3
5
6
9
10
12
1930 & 1940
2
4
4
7
8
9
30-1L
5
7
9
13
15
17
30-2L & 30-23L
2
3
4
7
7
9
5
2
Shelf bins
Capacity
l
Outer dims
W x D x H mm
Cross dividers
Inner dims
W x D x H mm
Pack Code* Code.* Code.*
pcs blue
red
ESD black
Code* Number
/bin
1,9
92 x 400 x 82 75 x 357 x 70 30
4010-6 4010-5 4010-4 ESD D-10
6
2,4
92 x 500 x 82 75 x 457 x 70 30
5010-6 5010-5 5010-4 ESD D-10
8
4,2
186 x 400 x 82 167 x 357 x 70 15
4020-6 4020-5 4020-4 ESD D-20
6
5,3
186 x 500 x 82 167 x 457 x 70 15
5020-6 5020-5 5020-4 ESD D-20
8
6,5
186 x 600 x 82 167 x 557 x 70 15
6020-6 6020-5 6020-4 ESD D-20
10
*) Order number/one items. All bins are also available in grey colour.
Red shelf bins
36
Ergonomic workspaces product catalogue 2014-2015
Small storage cabinets
Name
Module size
Size W x D x H mm
Max load kg
Code
Perforated tool cabinet
M500
470 x 250 x 600
20
854 039-07
Perforated tool cabinet
M750
720 x 255 x 900
60
852 629-07
Sliding door cabinet
M750
720 x 370 x 400
40
860 970-35
715 x 175 x 15
10
836 273-35
Shelf for M750 perforated tool cabinet
File cabinet with two shelves
M750
720 x 330 x 900
60
860 980-35
CD/folder box, fitted to upright tube
M750
130 x 290 x 330
5
860 983-35
Perforated tool cabinet
Sliding door cabinet
File cabinet with two shelves
CD/folder box
CPU cabinets and holders
Name
Size W x D x H mm
Max load kg
Suitable for
1.
CPU holder, bar clamp
>150 x 500 x 85
20
Concept benches
860 551-35
CPU holder
180-225 x 450 x 50
20
Concept benches
860 552-35
CPU holder
180-225 x 450 x 50
20
Concept benches,
electric adj.
860 740-35
2.
CPU holder
180-225 x 450 x 50
20
TP upright frame
860 553-35
3.
CPU holder
180-225 x 450 x 50
20
TP benches
854 440-35
4.
CPU cabinet *
325 x 550 x 560
40
all benches, except
TP upright frame
861 120-35
5.
Tool cabinet *
325 x 525 x 560
40
all benches, except
TP upright frame
861 121-35
*Fixed under bench top, fastening set for Concept bench see page 82 (same as fastening set for drawer unit 45). In
WB/TP benches brackets are included.
1. CPU holder, bar clamp
2. CPU holder
5. Tool cabinet
3. CPU holder
4. CPU cabinet
Footrests
Bars
Name
Size
W x D mm
860 084-35
Footrest, bar
550 x 350
90-280 5-30
Concept
860 136-35
860 085-35
Footrest, bar,
550 x 350
with gas action
90-260 5-30
Concept
860 196-35
Name
Bench frame
widht mm
Depth
adjustment mm
Code
Bar Concept •
1000
-
Bar Concept
1200
-
Bar Concept
1500
150
860 088-35
Bar Concept
1800
150
860 089-35
Bar Concept
2000
150
860 090-35
Height
Tilting Suitable
for
Code ESD
The bar can be used to fix a footrest, a small cabinet or a CPU holder. The
bar is included with the crank and electric adjustable Concept benches.
WORKBENCHES CONCEPT accessories
Code
• = non stock item
Footrest, bar
Footrest, bar, with gas action
Ergonomic workspaces product catalogue 2014-2015
37
MultiLine assembly solutions
Material flow to effective workstations
Optimised for WIP
In the assembly industry, workstations are well planned
and designed since they must function as well as possible.
MultiLine is expressly designed as an accessory for Treston
Group workspace solutions. Its underlying concept is
simple: by connecting workstations to a transfer line you
can achieve a more flexible and controllable material flow
between workstations without sacrificing characteristics
such as usability or ergonomics.
The core of WIP logic (work in process) comprises
allocating a value to stored items between production
phases. Money is wasted when half-ready products or
components lie unused e.g. in a trolley used as a buffer.
If MultiLine is used, only a small quantity of half-finished
products lies waiting between production phases.
WORKBENCHES MULTILINE
Low investment costs
38
The MultiLine transfer system has two characteristics,
due to which its investment costs remain low. Firstly, it is
integrated with an existing system, complementing current
processes and thereby avoiding the need for additional
investments. Secondly, it is built using standard parts and
design, which makes it easy to adapt to any situation and
space. It can also be easily and quickly modified when
the layout changes.
Trolley used as a buffer
Manual transfer line
Ergonomic workspaces product catalogue 2014-2015
This problem is amplified if a mistake made in one
phase remains unnoticed until a trolley full of defective
components is brought to the next phase. With MultiLine
both the cost per mistake and the number of mistakes are
significantly minimised, because only a few faulty products
can be produced before the mistake is noticed.
!
More information on MultiLine assembly
solutions on a separate brochure.
• = Faulty product
Mistake is made
in this phase
FlexFlow flow-through shelving
FlexFlow flow-through shelving can be used as
a standalone solution or integrated into a single
workstation or assembly line, resulting in faster
throughput, less work in process, higher productivity
and managed inventories. Your assembly process as a
whole will become simpler and more efficient.
!
More information on FlexFlow flow-through
shelving on a separate brochure.
FlexFlow is a flexible solution that allows easy addition
and removal of components as the role of the workstation
changes. FlexFlow can easily be customised to your
application and operator using a wide range of
accessories. When FlexFlow is equipped for, and adjusted
to individual needs the whole production process benefits.
FlexFlow module sizes
WORKBENCHES FLEXFLOW
FlexFlow is based on module sizes in order to allow it to
be easily integrated with other Treston Group workspace
solutions and the MultiLine
)
M750
50 +
7
transfer
system.
The
M
(
0
th 150
available sizes are M750 Wid
and M900. Both the width
and the depth can be
increased by combining
standard modules that
are M750, M900 and
M1350 in width, and
900 mm in depth.
Ergonomic workspaces product catalogue 2014-2015
39
TP and TPH workbenches
300
The classically designed TP workbench is the ideal
basic bench, the simplest and the most cost-effective
option in our range of workbenches. TP workbenches
are standard benches that are suitable for a broad range
of tasks and environments when fitted with accessories:
testing, packing, repairing, inspecting. TP bench is
guaranteed for regular use with loads up to 300 kg.
KG
2
years
GUARANTEE
• Steel structure
• A cost-effective option to start with
WORKBENCHES TP and TPH
• Easy to equip with a variety of accessories
40
Designed for use in today’s production and assembly
environments, this definitive modular system, developed
over more than 35 years, provides a high quality working
environment. Customise your workstation to your own
requirements.
Stepless height adjustment
The height of workbenches in our TP range can be
steplessly adjusted from 650 to 900 mm, which makes
these benches suitable for work while sitting or standing.
Packing is a typical example of work where the workbench
height must be set correctly for the height of the user.
Ergonomic workspaces product catalogue 2014-2015
• Concept accessories available
TP and TPH workbench examples
TP workbench Code C 120 41 300
TP upright frame with bench top Code C 123 35 102
Qty
Name
Size mm
Code
Qty
Name
Size mm
Code
1
Workbench TP
1500 x 700
TP715
1
TP upright frame
M900 x 1850
123 35 008
1
Accessory frame
1500
TPK15-35
1
ESD bench top
1200 x 600
TT12060-ESD
1
Upright tube module
2 x M750
903 350 01
1
Bracket pair
TPH workbench
Qty
Name
Size mm
Code
Qty
Name
Size mm
Code
1
Workbench TP
1500 x 700
TP715
1
Workbench TPH
1500 x 700
TPH715
1
Accessory frame
1500
TPK15-35
1
Drawer unit 45/14, 1x100 drawer
1
Upright tube module
2 x M750
903 350 01
1
Light/balancer rail
2 x M750
918 350 06
1
ProLite 28 light
1230
861 928 00
2
Metal shelf
M750 x 300
836 028-35
2
Bin profile
M750
859 151-35
10
Stacking bin
1525-5
603 35 002
The TP bench
can be equipped
with castors!
Castor set Ø100 Order No 834 734 -00
Castor set Ø100 ESD Order No 860 429 -00
Load capacity with castors 300 kg.
Ergonomic workspaces product catalogue 2014-2015
WORKBENCHES TP and TPH
TP workbench Code C 120 41 302
860 139-35
41
TP workbench
• Stepless height adjustment with allen-key between
650-900 mm.
• Frames are of epoxy powder coated steel in grey
RAL 7035.
• Upright tubes (ordered separately) allow to attach a
wide range of accessories.
TP workbench
Bench size
W x D mm
Max
load kg
Code
Code ESD
Laminate bench top
700 x 500
150
TP507
TP507 ESD
•
•
•
1000 x 500
150
TP510
TP510 ESD
25 mm low pressure laminate
Light grey surface
Plastic edging
1500 x 500
150
TP515
TP515 ESD
1000 x 700
300
TP710
TP710 ESD
1200 x 700
300
TP712
TP712 ESD
1500 x 700
300
TP715
TP715 ESD
1800 x 700
300
TP718
TP718 ESD
ESD bench top
1500 x 900
300
TP915
TP915 ESD
•
•
•
•
1800 x 900
300
TP918
TP918 ESD
Grey laminate surface
Grey edging
Thickness 25 mm
Semi-conductive (ESD)
Lower shelf for TP
Not enough space above the workstation? Then utilise the
space below. The lower shelf for TP bench simply hangs
on the horizontal bars.
Name
Size
W x D mm
Max
load kg
Code
Lower shelf
1080 x 500
50
AT120 TPH
Lower shelf
1380 x 500
50
AT150 TPH
Lower shelf
1680 x 500
50
AT180 TPH
SAP trolley
WORKBENCHES TP and TPH
Construction as TP bench. Height adjustment with allen
key between 650-900 mm. Swivel castors (Ø 100 mm),
two of which have brakes. Load capacity 150 kg. Lower
shelf and push handle available separately.
Trolley with a lower shelf and handle.
42
Ergonomic workspaces product catalogue 2014-2015
Name
Size
W x D mm
Max
load kg
Code
Code ESD
Trolley
700 x 500
150
SAP507
SAP507 ESD
Trolley
1000 x 700
150
SAP710
SAP710 ESD
Trolley
1500 x 700
150
SAP715
SAP715 ESD
Lower shelf
700 x 500
40
AT507
AT507 ESD
Lower shelf
1000 x 700
40
AT710
AT710 ESD
Handle
depth 500
PUSH50
PUSH50
Handle
depth 700
PUSH70
PUSH70
TP extension benches
TP715 L
TP line extension
TP715
Each standard TP bench may also be supplied as a line
extension. Fitted to side of main bench.
Bench size W x D mm
Max load kg
Code
Code ESD
1000 x 700
150
TP710 L
TP710 L ESD
1200 x 700
150
TP712 L
TP712 L ESD
1500 x 700
150
TP715 L
TP715 L ESD
1800 x 700
150
TP718 L
TP718 L ESD
1500 x 900
150
TP915 L
TP915 L ESD
1800 x 900
150
TP918 L
TP918 L ESD
TP715
TP510 K
TP angle extension
Each standard TP bench may also be supplied as an
angle extension. Fitted to front angle of main bench.
Bench size W x D mm Max load kg
Code
Code ESD
1000 x 500
150
TP510 K
TP510 K ESD
1200 x 700
150
TP712 K
TP712 K ESD
TP707 KK
TP715*
TP715*
TP corner workbench
A corner workbench can be used with two TP benches (with
one H-frame pair) to create a 90° angle setup.
* Workbench with one H-frame pair.
Code
Code ESD
1100 x 1100
150
TP707 KK
TP707 KK ESD
1300 x 1300
150
TP909 KK
TP909 KK ESD
This unit consists of a worktop, two side frames
and a leg in the middle. Front side 565 mm.
TP upright tubes
Horizontal
tube
The TP workbench is a cost-effective option to the modular
Concept workbench. Accessories are attached to both
benches with the aid of upright tubes or a pre-assembled,
upright tube module.
The module includes upright tubes, horizontal tube/tubes,
corner bracket pair and straight bracket (if module has
more than one horizontal tube). The upright tubes or the
upright tube module are attached to the back of the TP
bench with accessory frame (ordered separately).
Straight bracket
Corner bracket
Upright
tube
h=
l=
Accessory frame
!
Accessories from page 30
WORKBENCHES TP and TPH
Bench size W x D mm Max load kg
TP bench with upright tubes can be equipped with
Concept accessories.
Ergonomic workspaces product catalogue 2014-2015
43
Accessory frame
Bench frame
width mm
Fixing points for uprights
Code
1200
1 x M750, 1 x M900, 1 x M1200
TPK12-35
1500
1 x M1500, 2 x M750
TPK15-35
1800
1 x M1800, 2 x M900
TPK18-35
Upright tubes or the upright tube module are always attached to TP bench
with accessory frame. The accessory frame cannot be used on line or corner
extensions.
Accessory frame
Upright tubes
Upright tube modules and compatibility
Name
Size
W x D mm
Length Code
(l) mm
Upright tube
30 x 60
500
860 991-35
Upright tube
30 x 60
800
860 142-35
1 x M750 C
C/TP C
C
C
900 35 001 900 35 002
Upright tube
30 x 60
996
860 367-35
1 x M900 C
C/TP C
C
C
901 35 001 901 35 002
Upright tube
30 x 60
1359
860 024-35
2 x M500 C
C
Upright tube
30 x 60
1582
860 025-35
2 x M750
C/TP C
C
903 35 001 903 35 002
Horizontal tube
M500
860 819-35
2 x M900
C/TP C
904 35 001 904 35 002
Horizontal tube
M750
847 402-35
3 x M500
C
C
905 35 001 905 35 002
Horizontal tube
M900
840 104-35
4 x M500
C
906 35 001 906 35 002
Corner bracket pair
848 336-35
h = module’s height measured from the bench top surface
Straight bracket
851 827-35
Code
Code
Suitable for bench widths
l =1359 mm l =1582 mm
C = Concept
1000 1200 1500 1800 2000 h =1075 mm h =1300 mm
902 35 001 902 35 002
C
Aluminium bracket
Upright tube with
aluminium bracket
attached to the bench.
Name
Code
Aluminium bracket
846 554-00
Bracket can be used to attached a single tube to the bench.
TP upright frame with bench top
WORKBENCHES TP and TPH
600
TP upright frame
Size W x D mm
Max load kg
Code
M750 x 1500 •
300
123 35 005
M750 x 1850 •
300
123 35 006
M900 x 1500 •
300
123 35 007
M900 x 1850 •
300
123 35 008
0
83
Laminate bench top -69
Bench top & brackets for TP upright frame
Size
W x H mm
Max
load kg
Code
laminate bench top
Code
ESD bench top
1200 x 600
60
860 027-69
TT12060-ESD
Corner bracket pair
44
1200
1500, 1850
TP upright frame with bench top is a lighter version of the
TP workbench. In addition to the bench top attached to
the frame, it can be equipped with any of the Concept
accessories. It’s ideal for lighter use, when some additional
workspace is needed.
860 139-35
Ergonomic workspaces product catalogue 2014-2015
•
•
•
Light-grey, speckled laminate surface
Plastic edging
Thickness 25 mm
TPH workbench
The TPH workbench already includes a pair of uprights
and one shelf; composing our best selling workstation
set. It has its own range of accessories, also in stock, and
covering the essential, basic needs of any professional
workstation.
Height adjustment with allen-key between 650-900
mm. Workbench with upright profiles and a laminate
shelf, height adjustment between 1080-1550 mm, load
capacity 50 kg. Construction as TP.
Workbench TPH
Bench size
W x D mm
Shelf size
W x D mm
Max
load kg
Code
Code ESD
1200 x 700
1200 x 310
300
TPH712
TPH712 ESD
1500 x 700
1500 x 310
300
TPH715
TPH715 ESD
1800 x 700
1800 x 310
300
TPH718
TPH718 ESD
1500 x 900
1500 x 310
300
TPH915
TPH915 ESD
1800 x 900
1800 x 310
300
TPH918
TPH918 ESD
There is a large range of workbench accessories available.
TPH corner workbench
TPH715*
* Workbench with one H-frame pair.
A corner workbench can be used with two TPH workstations
(with one H-frame pair) to create a 90° angle setup. This
unit consists of a worktop and all necessary components.
Load capacity 150 kg. Front side 565 mm.
Bench size
W x D mm
Max load kg
Code
Code ESD
1100 x 1100
150
TPH707 KK
TPH707 KK ESD
1300 x 1300
150
TPH909 KK
TPH909 KK ESD
Power channels for TPH
Power channels for TPH
Dims mm
Suitable for
Profile 1058
TPH712
Profile 1358
TPH715/ 915
Profile 1658
TPH718/ 918
Includes 3 x E1, E2 TPH715/ 915
Includes 3 x E1, E2 TPH718/ 918
Double socket
Switch
Automatic fuse 10 A
Automatic fuse/earth leakage switch 10 A/30 mA
Emergency-stop-switch
Data connector/shielded for Cat.6 cable
Data connector/without screen for Cat.5 cable
Pneumatic, quick coupling 3/8”
Accessories on page 46
Code
TJK120
TJK150
TJK180
TJK150 SET
TJK180 SET
E1
E2
E3
E4
E5
E6
E7
E8
The finished TJK 150 SET and TJK 180 SET include 3 double sockets (E1)
and a switch (E2). (Other SETs are also available.)
Constructed from aluminium profile, this range of compact
power channels provides power distribution for TPH
benches. Pre-assembled with a choice of components,
ordered separately. The power channel is isolated from
the workbench. 3 m cable is included. Aluminium profile
72 x 72 mm. All meet with CE requirements.
WORKBENCHES TP and TPH
TPH707 KK
TPH715*
!
Power channel TJK
Ergonomic workspaces product catalogue 2014-2015
45
Accessories for TPH
Metal shelf TH
Metal shelf TH
Size
W x D mm
Max
load kg
Suitable for
Code
Code
ESD
1119 x 145
1419 x 145
1719 x 145
30
30
30
TPH712
TPH715/ 915
TPH718/ 918
TH120
TH150
TH180
TH120 ESD
TH150 ESD
TH180 ESD
Adjustment for depth, height and angle. For stacking and picking bins. Load
capacity 30 kg.
Bin profile BP
Width mm
Max load kg Suitable for
profile 1115 15
profile 1415 15
profile 1715 15
Code
Code ESD
TPH712
BP120
TPH715/ 915 BP150
TPH718/ 918 BP180
BP120 ESD
BP150 ESD
BP180 ESD
Aluminium profile for stacking and picking bins.
Bin profile BP
Auxiliary shelf SH
Size
W x D mm
Max
load kg
Suitable for
Code
Code ESD
1200 x 310
1500 x 310
1800 x 310
50
50
50
TPH712
TPH715/ 915
TPH718/ 918
SH120
SH150
SH180
SH120 ESD
SH150 ESD
SH180 ESD
Height adjustable shelf. 25 mm laminated particle board .
Auxiliary shelf SH
Perforated panel RL
Perforated panel RL
Size W x H mm
Suitable for
Code
Code ESD
1115 x 750
1415 x 750
1715 x 750
Panel hooks for TPH
TPH712
TPH715/ 915
TPH718/ 918
TPH
RL120
RL150
RL180
RK1
RL120
RL150
RL180
RK1
Robust, perforated steel panel. 9 mm perforations at 38 mm centres. Mount
on TPH-benches with connectors RK 1. Can also be attached to a wall with
screws (included).
Tool and lighting support KT
WORKBENCHES TPH accessories
Size
W x D mm
1200 x 600
1500 x 600
1800 x 600
Extra C-profile 1500
Extra C-profile 1800
Tool and lighting support KT
Suitable for
Code
Code ESD
TPH712
TPH715/ 915
TPH718/ 918
KT150
KT180
KT120
KT150
KT180
SPR150
SPR180
KT120
KT150
KT180
SPR150
SPR180
For suspending power tools and lighting units. Includes one C-profile bar with
sliding hook.
Swivel arm with tray CKV
Size
W x D mm
Max
Suitable for
load kg
Code
Code ESD
Tray 210 x 460
15
CKV400
CKV400 ESD
TPH
Swivel arm with lockable, angle adjustable steel tray. Load 15 kg. Mount
on C-profile.
Swivel arm with tray CKV
Upright profiles HKCP
Height mm
Suitable for
Code
Code ESD
1470
TPH
HKCP147
HKCP147
If you mount both perforated panel RL and cable channel TJK to TPH
benches, you must order extra-high upright profiles.
46
Ergonomic workspaces product catalogue 2014-2015
Component rack EPL
Size
W x D x H mm
Suitable for
Shelves
number
Code ESD
455 x 200 x 290
CKV
3
EPL12 ESD
Rack with three fixed shelves. Of semiconductive epoxy powder coated steel
in light grey (RAL 7035).
Component rack EPL
Cable tidy TPHCT
Size W x D x H mm
Suitable for
Code
Code ESD
1115 x 45 x 205
1415 x 45 x 205
1715 x 45 x 205
TPH712
TPH715/ 915
TPH718/ 918
TPHCT120
TPHCT150
TPHCT180
TPHCT120
TPHCT150
TPHCT180
Mounted between C-profiles below worktop. Of perforated epoxy powder
coated steel.
Cable tidy TPHCT
Cable clip set CC
Set
5 pcs/set
Max load kg
15
Suitable for
TPH
Code
CC12
Code ESD
CC 12
The cable clip set will hold cables etc. securely and neatly in place along
the bench frame. The clips locate in the 12 mm profile slot.
PC stand CPU
Width mm
Height mm
Suitable for
130-240
340-460
395-500
180-285
WB and TP/TPH benches, CPU
SAP/CTR/WTR trolleys
Code
Code ESD
Cable clip set CC
CPU
An adjustable holder for either vertical or horizontal CPU, to mount underneath
the bench worktop.
LCD bracket MH
Max load kg
Suitable for
15
WB/TPH benches and WTR trolley MH
Code
Code ESD
MH
The quick-release mechanism is equipped with the standard used flat-screen
mount 75 x 75 and 100 x 100 for the mounting of all normal flat-screens.
Connector HKC-MH/MA needed for mounting to TPH benches, ordered
separately.
PC stand CPU
LCD swivel arm MA
Suitable for
10
WB/TPH benches and WTR trolley MA
Code
Code ESD
MA
The quick-release mechanism is equipped with the standard flat-screen mount
75 x 75 and 100 x 100 for the mounting of all normal flat-screens. The arm
is double articulated, turns through a radius of 180° and will extend between
95-425 mm from the upright. Connector HKC-MH/MA needed for mounting
LCD swivel arm MA to TPH benches, ordered separately.
LCD bracket MH
LCD swivel arm MA2
Max
load kg
Suitable for
15
WB/TPH benches and WTR trolley MA2
Code
Code ESD
MA2
The quick-release mechanism is equipped with the standard, widely used flatscreen mount 75 x 75 and 100 x 100 for the mounting of all normal flat-screens.
The arm is double articulated, turns through a radius of 180° and will extend
between 95-425 mm from the upright. Connector HKC-MH/MA needed for
mounting LCD swivel arm MA2 to TPH benches, ordered separately.
LCD swivel arm MA
Connector HKC
Suitable for
Code
LCD bracket MH
LCD swivel arm MA/MA2
HKC-MH
HKC-MA
Connector HKC-MH/MA is needed for mounting LCD bracket /swivel arm
MA to TPH benches.
WORKBENCHES TPH accessories
Max
load kg
LCD swivel arm MA2
Ergonomic workspaces product catalogue 2014-2015
47
Accessories that suit all benches
Accessories attached to the bench top
Name
Size
W x D x H mm
Max
load kg
Suitable for
Code
Equipment tray with bench top fixing •
250 x 250 x 90
5
all benches
860 885-35
Document holder A4 with bench top fixing •
290 x 330
5
all benches
860 882-35
Tool panel with bench top fixing •
267 x 305
5
all benches
860 883-35
Bin rail with bench top fixing •
315 x 72
5
all benches
860 884-35
Light arm, bench top fixing •
200
5
all benches
860 990-35
all benches
860 840-35
Bag holder for bench top lower edge
Keyboard tray NT
500 x 250 x 110
WB and TP/TPH benches, SAP/WTR trolleys
NT 500 ESD
Bench top turntable, ESD
Ø 475
all benches
847 145-00
CPU cabinet*
325 x 550 x 560
40
all benches, except TP upright frame
861 120-35
Tool cabinet*
325 x 525 x 560
40
all benches, except TP upright frame
861 121-35
WORKBENCHES Accessories that suit all benches
*Fixed under bench top, fastening set for Concept bench see page 82 (same as fastening set for drawer unit 45). In WB/TP benches brackets are included.
48
Equipment tray
Document holder
Tool panel
Bin rail
Light arm
Bag holder
Keyboard tray NT
Bench top turntable
CPU cabinet
Tool cabinet
Outlet panel PRK 5
Dims mm
5 Schuco wall sockets,
switch and 3 m cable
Suitable for
WB and TP/TPH benches, CTR/SAP/WTR trolleys.
Code
PRK5
Mount on upright profiles with connectors (included). Can also be attached under the laminate shelf with screws.
Ergonomic workspaces product catalogue 2014-2015
Footrests
Name
Size W x D mm
Height
Tilting
Suitable for
Footrest, floor •
550 x 350
100
5-30
All benches
860 947-35
Footrest, floor, height adjustable
550 x 350
90-280
5-30
All benches
860 137-35
Footrest, floor, with gas action
550 x 350
90-260
5-30
All benches
Footrest JT2*
500 x 370
100
Code
Code ESD
860 224-35
All benches
JT2
JT2 ESD
*The feature of this foot rest is the fluted exercise roller which revitalises the feet while working. The surface is corrugated to prevent slipping. Colour grey. Material
polystyrene.
• = non stock item
Footrest, floor
Footrest, floor, height
adjustable
Footrest JT2
Footrest, floor, with
gas action
ESD accessories
2
1
Earthing supplies
Name
Press button Resistance Code
1 Earthing box
3 x 10 mm 1 Mohm
2 Earth junction box, yellow
J6603
860 522-00
3 Earthing cable, black, 1,5 m
10 mm /
1 Mohm
M5 terminal
860 520-00
4 Earthing cable 5 m
10 mm
MK3040
5 Press stud
10 mm / female
1 Mohm
3
4
PN3034
Wrist straps
Press button
Resistance Code
6 Adjustable wrist strap
7 mm
1 Mohm
R2216
7 Metal wrist strap
7 mm
1 Mohm
R2206
5
Wrist strap set includes wrist band and coiled cord. Earth lead with 1
megaohm resistor, length 3,6 m. Includes 7 mm press stud for connection to
wrist strap and 10 mm press stud for connection to earthing point.
6
7
ESD mats
Name
Size W x D mm
Code
8 ESD Ergo floor mat
950 x 650
852 880-00
9 Bench top ESD-mats* 1,22 x 10,00 m (12,20 m²)
PM157
8
Resistant to heat, solder flux, most chemicals and solvents. The ESD mats are to
EN 61340-5-1 standards. Abraded non slip underside. Does not contain PVC.
Supplied by the metre or on rolls. Colour: platinum grey. Resistance surface to
ground: 7,5 x 10 5 - 10 7 ohm.
ESD-flooring LM 9500
Name
Roll size m
Resistance
Code
10 ESD-flooring
1,5 x 25
100K ohm
LM9500
9
10
WORKBENCHES Accessories that suit all benches
Name
Dissipative, hard wearing vinyl flooring requiring permanent on site installation. Supplied by the metre or on rolls. Accessories: Press stud and earthing
cable. Colour: grey.
Ergonomic workspaces product catalogue 2014-2015
49
50
Ergonomic workspaces product catalogue 2014-2015
Lighting
Ergonomic workspaces product catalogue 2014-2015
51
Lighting ergonomics
When designing workstations and their lighting, we
observe the recommendations of the EN 124641 standard on indoor workplace lighting. These
recommendations apply mainly to the actual workstation
and its immediate surroundings. The conditions set by
the standard must be met in every location where the
workstation could be placed. This becomes possible only
with adequate, ambient lighting or quality workstation
lighting, the latter often being the more cost-efficient
solution.
When designing the workstation lighting, the requirements
of the work are determined first. A task that demands a
good eye for detail usually calls for a spotlight. If the
viewed object is square, at least two lights are necessary,
in order to remove shadows. If the viewed object is a level
surface, it can be illuminated with one long fluorescent
lamp – though it is important to remember to direct any
reflections away from the user.
Another important requirement is adequate and glarefree lighting. In particular, poor viewing conditions affect
presbyopic people (on average above 45 years of age)
whose closest possible viewing-point is at a distance of
around 50 cm. If the employee uses reading glasses at
work, the position of the viewed object and the lighting
require some additional attention.
When optical ergonomics have been integrated in the
environment and the working position is well adjusted,
you can expect to save time and money due to fewer
absences and decreased stress.
LIGHTTING
Optical ergonomics requires optimised
conditions
52
Optical ergonomics relates to optimal viewing conditions;
where the work performed does not unduly stress the
eyes, even when working constantly over long periods of
time. This requires the viewed object, such as a piece of
equipment being assembled, to be at a suitable distance
and direction, in order to keep eye movements at an
acceptable level and ensure that the details can be seen
without problems.
Ergonomic workspaces product catalogue 2014-2015
Optical ergonomics requires the viewed object to be at
a suitable distance and direction, in order to keep eye
movements at an acceptable level
LED magnifying task light
The magnifying task light is suitable for precise
work for professionals in industry, research and
development, laboratories, the medical profession,
precision crafts, beauty clinics, the visually impaired etc.
Distance 20 cm
Magnifying light ZL3
60
The new technology LED light creates the same amount of
bright, flicker free light as a comparative fluorescent light
but saves up to 75% electricity. The light has a 3 dioptre
magnifying lense and an easy to use multi joint arm to be
connected to a bench top.
50
Lamp power
Code
18 W
ZL3
10
0
0
cm
10
20
30
40
50
60
5◦
-15
2000 - 2400
1600 - 2000
1200 - 1600
800 - 1200
400 - 800
0 - 400
lx
Distance 50 cm
60
50
40
30
20
40
10
700 - 800
600 - 700
500 - 600
400 - 500
300 - 400
200 - 300
0
0
0
165
400
(40◦)
00◦
±105◦
40
70-2
±105◦
160◦
10
20
30
40
50
60
0 - 200
lx
Graph of light intensity
Work surface dimensions: 60 x 60 cm. Distance of light
from surface: 20 cm and 50 cm. Unit of measure: lux (lx).
The higher the number, the stronger the light.
Ergonomic workspaces product catalogue 2014-2015
LIGHTTING LED magnifying task light
Width mm
310
20
Max. 800 lx
Name
Magnifying light
30
Max. 2800 lx
Light is produced by 6 powerful LED’s that can be
adjusted according to needs; the left and right sides can
be independently adjusted in steps. The light has a lastsetting memory and the original settings can be reset.
Environmentally friendly and long life LED’s do not flicker
or react to bumps and vibrations.
40
2400 - 2800
53
Lighting units
NEW
HiLite LED Lighting level 1 m ~ 1800 lx
HiLite LED lamp is a top model representing state-of-theart technology. The lamp has an excellent price-quality
ratio, since it consumes little energy and consequently has
a long service life. The HiLite LED is particularly suited to
lighting tasks that require precision, such as assembly and
inspection.
HiLite 54 is a powerful workbench light for the precise
illumination of tasks that require high accuracy, such
as electronics assembly, fine mechanical assembly,
laboratories and testing.
ProLite 28 is a standard light for workbenches where
good general lighting is required but high accuracy is not
necessary, for example packing stations.
HiLite 54 Lighting level 1 m ~ 1350 lx
SatelLite 36 is a side light designed to illuminate areas
not reached by general lighting.
Task Light is an adjustable spotlight for tasks that require
high accuracy, for example electronics repair and fine
detailed mechanical work.
ProLite 28 Lighting level 1 m ~ 750 lx
Name
Width mm Lamp power Suitability
Code
HiLite LED
1230
861 956-00
LED
all benches
HiLite 54*
1230
54 W
all benches
861 954-00
ProLite 28*
1230
28 W
all benches
861 928-00
SatelLite 36* 500
36 W
Concept and TP
benches
861 936-00
Task light
36 W
Concept and TP
benches
860 181-35
485
* equipped with an electronic starter
Apart from task light luminares can be mounted on all lamp mounts produced
by Treston Group (WB: support bracket HSB, page 24 /Concept and TP: light
and balancer rail, page 31 / TPH: tool and lighting support KT, page 46).
LIGHTTING Lighting units
SatelLite 36 Lighting level 1 m ~ 800 lx
Task Light Lighting level 1 m ~ 400 lx
Optical ergonomics require adequate
and glare-free lighting
54
Ergonomic workspaces product catalogue 2014-2015
Overlight OL 254 and sidelight SL 224 are suitable for
use with moving machinery giving asymmetric lighting with
minimal shadow. (Flicker free tubes ensure that rotating
objects will not appear to be stationery, a common
optical effect when standard fluorescent tubes are used.)
Silver grey anodized aluminium frame with an anti-dazzle
screen. Angle continuously adjustable. With own switch
and 3 m cable. The lighting units are isolated from the
workbench.
Overlight OL 254 D
Name
Width
mm
Lamp Suitability
power
Code
Overlight OL254
1200
54 W
all benches
OL254
Overlight with
dimmer OL254 D
1200
54 W
all benches
OL254 D
Sidelight SL224
590
24 W
WB and TPH benches
SL224
Overlights can be mounted on all lamp mounts produced by Treston Group
(WB: support bracket HSB, page 24 /Concept and TP: light and balancer
rail, page 31 / TPH: tool and lighting support KT, page 46).
Distance100 cm
0
Graph of light intensity
Light intensity (lux) is tested on a horizontal worktop
using the OL 254. The diagram below shows the results.
Worktop size is 700 x 1500 mm, height of light unit
above worktop is 1000 mm. The lux (lx) is the SI unit of
illuminance and luminous emittance measuring luminous
power per area.
15
1200 lx
30
1000 lx
45
800 lx
LIGHTTING Lighting units
Mounting kit SL-HKC required for use of sidelight with TPH benches; ordered
separately.
Sidelight SL 224
70
cm
0
30
60
90
120
150
Ergonomic workspaces product catalogue 2014-2015
55
56
Ergonomic workspaces product catalogue 2014-2015
Chairs
Ergonomic workspaces product catalogue 2014-2015
57
Chairs that are not only
ergonomic but also stylish
The chair is a very important part of the ergonomics
of a workstation. Even if the workstation is designed
according to all the rules of ergonomics, a bad chair
can destroy the final result. An ergonomic chair and a
well-designed workstation make working productive
and comfortable.
Upholstered chairs
Seat height
Seat tilt
Backrest tilt
Backrest height
Our upholstered chair range fulfils seating requirements
from the production environment through to the office and
meeting room. Optimum ergonomics improve workplace
efficiency.
Industrial chairs
CHAIRS
Durable industrial chairs constructed with a cushioned
polyurethane seat and back that can be washed or steam
cleaned. The chairs are very comfortable to sit on and
offer excellent lumbar support. The grooves act as lines
giving the chairs a new strong visual effect and style.
58
Ergonomic seating
The chair is a very important part of the ergonomics of
a workstation. In order to get the best possible support
in various working positions the chair must be adjusted
correctly to every user.
Ergonomic workspaces product catalogue 2014-2015
Armrests can be adjusted front- or backwards (X-series)
1. Task chair X30
2. Task chair X32
3. Task chair X35
•
adjustment for seat height, seat tilt,
backrest height and backrest tilt
•
two positions possible: normal sitting and
half-sitting
•
adjustment for seat height, seat tilt,
backrest height and backrest tilt
•
abrasion resistance: 100 000 Martindale
(40 000 Martindale with ESD-textile)
•
adjustment for seat height, seat tilt, backrest
height and backrest tilt
•
abrasion resistance: 100 000 Martindale
(40 000 Martindale with ESD-textile)
•
•
castors brake when unloaded
•
abrasion resistance: 100 000 Martindale
(40 000 Martindale with ESD-textile)
•
•
floor glides and foot ring included
•
•
castors brake when unloaded
arm rests as an option
arm rests as an option
arm rests as an option
4. Task chair X40
5. Task chair X40L
6. Task chair S
•
•
•
•
adjustment for seat height, backrest height
and backrest tilt (+ seat tilt on ESD version)
synchronized mechanism for adjusting the
seat and backrest tilt
as X40, but without head rest
arm rests optional
•
adjustment for seat height, seat depth, backrest height and backrest tilt
•
abrasion resistance: 60 000 Martindale
(60 000 Martindale with ESD-textile)
•
abrasion resistance: >50 000 Martindale
(40 000 Martindale with ESD-textile)
•
•
castors (no break)
•
•
castors brake when unloaded
ESD conductivity
ESD conductivity is in accordance with
IEC 61340-5-1. Flammability class is
EN1021/1-2
CHAIRS
arm rests as an option
arm rests and higher gas spring as an option
Ergonomic workspaces product catalogue 2014-2015
59
7. Polyurethane chair X20 PU
8. Polyurethane chair X25 PU
9. Stool X10 PU
•
•
seat and backrest are formed polyurethane
•
•
seat and backrest are formed polyurethane
•
•
•
•
•
castors brake when unloaded
•
•
floor glides and foot ring included
adjustment for seat height, seat tilt, backrest height
and backrest tilt
arm rests as an option
adjustment for seat height, seat tilt, backrest height
and backrest tilt
11. Saddle chair
•
•
•
•
•
Blue
textile
1
Red
textile
adjustment for seat height
castors brake when unloaded
arm rests as an option
10. Stool X15 PU
construction as X10, but slightly higher
seat is formed polyurethane
freedom of movement with ergonomic sitting position
adjustment for seat height, seat tilt
abrasion resistance: >50 000 Martindale with ESD-textile
castors (no break)
Grey
textile
Dark blue
textile
2
Grey
ESD-textile
3
Black
ESD-textile
4
CHAIRS
Footrests
Name
Size W x D mm
Height
Tilting
1. Footrest, floor •
550 x 350
100
5-30
860 947-35
2. Footrest, floor, height adjustable
550 x 350
90-280
5-30
860 137-35
3. Footrest, floor, with gas action
550 x 350
90-260
5-30
4. Footrest JT2*
500 x 370
100
Code ESD
860 224-35
JT2
JT2 ESD
*The feature of this foot rest is the fluted exercise roller which revitalises the feet while working. The surface is corrugated to prevent slipping. Colour grey. Material
polystyrene.
• = non stock item
60
Code
Ergonomic workspaces product catalogue 2014-2015
Product
1
Task chair X30 B, blue
Task chair X30 R, red
Task chair X30 G, grey
Task chair X30 G ESD, grey
2
Task chair X32 B, blue •
Task chair X32 R, red •
Task chair X32 G, grey
Task chair X32 G ESD, grey
3
Task chair X35 B, blue
Task chair X35 R, red •
Task chair X35 G, grey •
Task chair X35 G ESD, grey •
4
Task chair X40 B, dark blue
Task chair X40 R, red
Task chair X40 G, grey
Task chair X40 G ESD, grey
Task chair X40 BL ESD, black
5
Task chair X40L B, dark blue •
Task chair X40L R, red •
Task chair X40L G, grey •
Task chair X40L G ESD, grey •
Task chair X40L BL ESD, black •
6
Task chair S, grey
Task chair S ESD, black
7
Polyurethane chair X20 PU, black
Polyurethane chair X20 PU ESD, black
8
Polyurethane chair X25 PU, black
Polyurethane chair X25 PU ESD, black
9
Stool X10 PU, black
Stool X10 PU ESD, black
10 Stool X15 PU, black
Stool X15 PU ESD, black
11 Saddle chair B, blue
Saddle chair ESD, blue
Saddle chair G ESD, grey
Saddle chair AL ESD, black (artificial leather)
Saddle chair AL Antib, black (artificial leather)
Saddle chair L, black (leather)
Height adjust
410-550
410-550
410-550
410-550
450-650
450-650
450-650
450-650
500-740
500-740
500-740
500-740
420-560
420-560
420-560
420-560
420-560
420-560
420-560
420-560
420-560
420-560
400-550
400-550
400-540
400-540
490-730
490-730
370-510
370-510
490-730
490-730
575-820
550-730
575-820
575-820
575-820
575-820
Seat size mm
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
445 x 455
475 x 455
475 x 455
475 x 455
475 x 455
475 x 455
475 x 455
475 x 455
475 x 455
475 x 455
475 x 455
480 x 470
480 x 470
370 x 425
370 x 425
370 x 425
370 x 425
Ø 350
Ø 350
Ø 350
Ø 350
Backrest size mm
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
370 x 275
510 x 430
510 x 430
510 x 430
510 x 430
510 x 430
510 x 430
510 x 430
510 x 430
510 x 430
510 x 430
420 x 380
420 x 380
350 x 265
350 x 265
350 x 265
350 x 265
Code
X30 B
X30 R
X30 G
Code ESD
X30 G ESD
X32 B
X32 R
X32 G
X32 G ESD
X35 B
X35 R
X35 G
X35 G ESD
X40 B
X40 R
X40 G
X40 G ESD
X40 BL ESD
X40L B
X40L R
X40L G
X40L G ESD
X40L BL ESD
862 013-00
862 001-00
X20 PU
X20 PU ESD
X25 PU
X25 PU ESD
X10 PU
X10 PU ESD
X15 PU
X15 PU ESD
Saddle B
420 x 350
862010-00
Saddle G ESD
Saddle AL ESD
Saddle AL Antib
Saddle L
• = non stock item
Accessories for chairs
Product
Height adjust mm
Arm rests X-series
140-220
Arm rests X-series ESD
140-220
Arm rests, task chair S
160-220
Arm rests ESD, task chair S
160-220
Gas lift
400-540/410-550/420-560
Gas lift
450-650
Gas lift
500-740
Gas lift
370-510
Gas lift, black
530-720
Gas lift, ESD, chrome
530-720
Foot ring, chrome
Foot ring, chrome
Black - swivelling twin castor for soft floors (brake unloaded), standard in X10 - X30
Black/grey - SOFT swivelling twin castor for hard floors (brake unloaded),
standard in X40
Dimension mm
Ø 440
Ø 50
Ø 50
Compatibility
X-series
X-series, ESD
Task chair S
Task chair S, ESD
X20 PU/X30/X40
X32
X35/X25 PU
X10
Task chair S
Task chair S, ESD
X35, X25PU
Task chair S
all chairs
all chairs
Black - ESD swivelling twin castor for ESD floors (brake unloaded),
standard in X10 - X40 ESD
Black/grey - ESD SOFT swivelling twin castor for ESD floors (brake unloaded),
TO ORDER
Black/grey - ESD SOFT swivelling twin castor for ESD floors (brake loaded),
TO ORDER
Crome swivelling twin castor for soft floor (brake loaded), TO ORDER
Floor glide, standard in X25 PU, X35
High ESD floor glide, TO ORDER
Ø 50
all chairs
4045
Ø 50
all chairs
9692
Ø 50
all chairs
9722
Ø 50
Ø 14/50, h: 39,5
Ø 36/50, h: 59,5
all chairs
X10, X20, X30
Code
AR
Code ESD
AR ESD
862 007-00
862 006-00
4046
4062
4047
4046
862 008-00
862 009-00
9723
4043
CHAIRS
8766
831 190-50
4044
4061
4060
4088
Ergonomic workspaces product catalogue 2014-2015
61
62
Ergonomic workspaces product catalogue 2014-2015
Trolleys
Ergonomic workspaces product catalogue 2014-2015
63
Freedom of mobility with trolleys
Increased productivity with mobility
Work is not always confined to a single workstation and
tools must be moved around accordingly. Lightweight
trolleys are ideal for this situation, significantly increasing
productivity up to 30%.
The trolleys provide extra work or storage space and can
be used, for example, to transport various items, to store
measuring units and keep a buffer stock on a production
line.
TROLLEYS
Each task is different and requires dedicated tools. Due
to their modularity and versatile accessory components,
trolleys are easy to design and adapt to suit a multitude of
users and applications.
64
Ergonomic workspaces product catalogue 2014-2015
300
350
KG
KG
KG
Universal trolley WTR
Multi trolley
Basic trolley
Most often combined with WB
workstations to provide extra storage
space. A good adjustable PC
station, measuring station or mobile
storage, best suitable for moving
equipment around the workstation.
With three widths and two heights
available this trolley is suitable for
a wide range of needs. The sturdy
shelves can be adjusted and tilted,
making it easy to arrange different
types of equipment, even heavy loads.
This trolley can be equipped with
shelves, tops and other accessories
to fit any application, such as
transportation or tool storage.
150
300
90
KG
KG
KG
Adjustable trolley TRTA
Mobile workstation MLC
Storage trolley
For general use wherever a good
transportation and storage solution
is needed. Two or four shelves
available; height of the shelves can
be adjusted. Mesh panels can be
installed at the ends or on the sides.
Also a SMD reel holder version
available.
An ergonomic and versatile tool with
key qualities such as light weight,
small size and excellent mobility.
Used wherever a laptop is needed
on the go.
Simple solution for mobile storage.
The shelves are fitted with rubber
mats and the middle shelf is
adjustable.
150
150
150
KG
KG
KG
Ergo trolley
SAP trolley
CTR trolley
Most often combined with Concept
workstations to provide extra
work and storage space. Can
be equipped with a lower shelf,
available separately.
Most often combined with TP
workstations to provide extra
workspace. Can be equipped with a
lower shelf, available separately.
Most often combined with WB
workstations to provide extra workspace. Lower shelf is integrated.
Ergonomic workspaces product catalogue 2014-2015
TROLLEYS
150
65
Universal trolley WTR
A good quality, versatile trolley, PC-station, measuring station or
mobile storage trolley. Modern industrial design.
The standard trolley has 3 shelves (TS 605), size 650 x 530 mm.
Height adjustment of shelves is by allen-key. The vertical profiles are
of aluminium. Frames are of epoxy powder coated steel: light grey
RAL 7035. The worktops are of 25 mm laminated particle board. Four
swivel castors (Ø 125 mm) two of which have brakes, overall height of
castor 141 mm.
5
2
Universal trolley WTR
Name
Size
W x D x H mm
Max
Code
load kg
1. Universal trolley
660 x 650 x 1415 150
WTR140
WTR140 ESD
2. Extra shelf
530 x 650
50
TS605
TS605 ESD
3. Adjustable shelf*
530 x 650
50
TAS605
TAS605 ESD
4. Bin profile
Length 525
BP50
BP50 ESD
WJK40
WJK40
5. Power channel WJK 40** Length 470 mm
Code ESD
*Continuous adjustment for depth, height and angle.
** May be fitted with a choice of components, ordered separately. All meet with CE requirements. 3 m cable is included.
**COMPONENTS FOR POWER CHANNEL WJK 40
E1
E2
E3
E4
Double socket (max. 5 pcs/1 cable)
Switch
Automatic fuse 10 A
Automatic fuse/earth leakage switch
10 A/30 mA
E5 Emergency-stop-switch
E6 Data connector/shielded for
Cat.6 cable
E7 Data connector/without screen
for Cat.5 cable
E8 Pneumatic, quick coupling 3/8”
4
TROLLEYS Universal trolley WTR
3
66
1
1
Ergonomic workspaces product catalogue 2014-2015
Multi trolley
Multi trolleys provide an ergonomic mobile workstation.
Multi trolleys are available in three different widths: M500,
M750 and M900. This means that all our module-sized
accessories can be used with the trolleys.
Multi trolleys support heavy loads, but they are easy
to move as well, making it simple to transport heavy
equipment, such as measuring units. They are equipped
with four swivel castors (Ø 100 mm), two of which have
brakes.
Multi trolleys
Name
Module
Code
Code ESD
Multi trolley 1
M500
C 721 41 001 •
C 721 35 001 •
Multi trolley 1
M750
C 721 41 002 •
C 721 35 002 •
Multi trolley 1
M900
C 721 41 003 •
C 721 35 003 •
Multi trolley 2
M500
C 722 41 001
C 722 35 001
Multi trolley 2
M750
C 722 41 002
C 722 35 002
Multi trolley 2
M900
C 722 41 003
C 722 35 003
Adjustable shelf
Bottom shelf
Multi trolley 2
TROLLEYS Multi trolley
The sturdy shelves can be height-adjusted and tilted. They
are also equipped with borders and rubber mats, which
keep the load in place.
Multi trolley 1
• = non stock item
Ergonomic workspaces product catalogue 2014-2015
67
0
50/M90
7
M500/M
Multi trolley frame
990
Name
Module Size
W x D x H mm
Multi trolley 1
frame
Code ESD
Multi trolley 1 frame • M500
530 x 715 x 1130 300
Multi trolley 2 frame
M500
530 x 715 x 1630 300
860 818-41 860 818-35
Multi trolley 1 frame • M750
780 x 715 x 1130 300
860 154-41 860 154-35
Multi trolley 2 frame
860 812-41 860 812-35
M750
780 x 715 x 1630 300
860 156-41 860 156-35
Multi trolley 1 frame • M900
935 x 715 x 1130 300
860 155-41 860 155-35
Multi trolley 2 frame
935 x 715 x 1630 300
860 157-41 860 157-35
M900
140
110
Max
Code
load kg
715
Bottom shelf
ø 100
0
50/M90
7
M500/M
Name
Module
Size
W x D mm
Max
load kg
Code
Code ESD
Bottom shelf*
M500
470 x 505
100
860 846-41
860 846-35
Bottom shelf
M500
470 x 650
100
860 847-41
860 847-35
Bottom shelf*
M750
720 x 505
100
860 057-41
860 057-35
Bottom shelf
M750
720 x 650
100
860 067-41
860 067-35
Bottom shelf*
M900
870 x 505
100
860 059-41
860 059-35
Bottom shelf
M900
870 x 650
100
860 069-41
860 069-35
*Compatible only with Multi trolley 1.
1490
Adjustable shelves are equipped with an ESD mat (35) or rubber mat (41).
Adjustable shelf for trolleys
317
140
,5
715
ø 100
Multi trolley 2
frame
Name
Module
Size
W x D mm
Max load
kg
Code ESD
Adjustable shelf
M500
470 x 505
100
921 35 001
Adjustable shelf
M500
470 x 650
100
921 35 002
Adjustable shelf
M750
720 x 505
100
921 35 005
Adjustable shelf
M750
720 x 650
100
921 35 006
Adjustable shelf
M900
870 x 505
100
921 35 009
Adjustable shelf
M900
870 x 650
100
921 35 010
Adjustable shelves are equipped with an ESD mat (35) or rubber mat (41).
Adjustable shelf, stepless depth adjustment
50
5/
65
0
0
87
720/
470/
Name
Module
Size
W x D mm
Max
Code ESD
load kg
Adjustable shelf, stepless depth adjustment
M500
470 x 505
50
921 35 003
Adjustable shelf, stepless depth adjustment
M500
470 x 650
50
921 35 004
Adjustable shelf, stepless depth adjustment
M750
720 x 505
50
921 35 007
Adjustable shelf, stepless depth adjustment
M750
720 x 650
50
921 35 008
Adjustable shelf, stepless depth adjustment
M900
870 x 505
50
921 35 011
Adjustable shelf, stepless depth adjustment
M900
870 x 650
50
921 35 012
TROLLEYS Multi trolley
Adjustable shelves are equipped with an ESD mat (35) or rubber mat (41).
68
!
Ergonomic workspaces product catalogue 2014-2015
Modular size
The modular (M) size refers to the distance
between two upright tubes from the middle of
the tube. The modular size is used to find the
appropriate accessories.
Basic trolley
Equip your trolleys with shelves, tops and other
accessories to fit any application, such as transportation
or tool storage. All trolleys are equipped with four swivel
castors (Ø 125 mm), two of which have brakes. The basic
trolley can be combined with all the M750 accessories.
Basic trolleys
Name
Size
W x D x H mm
Max
load kg
Code
Basic trolley 1
800 x 715 x 1625
350
C 740 35 101
Basic trolley 2
800 x 715 x 1625
350
C 740 07 102
Basic trolley 3
800 x 715 x 1625
350
C 740 41 003
Basic trolley 4
800 x 715 x 1625
350
C 740 07 004
Basic trolley 5
800 x 715 x 1625
350
C 740 41 105
Basic trolley frame
800 x 715 x 1625
350
C 740 41 000
Basic trolley 1
Basic trolley 2
Basic trolley accessories
Name
Size
W x D x H mm
720 x 560 x 32
Max
load kg
Code
150
852 719-41
Bottom shelf with
HDPE plastic covering
720 x 560 x 32
150
852 683-41
Shelf with rubber mat*
Shelf with HDPE
plastic covering*
720 x 560 x 32
720 x 560 x 32
150
150
852 720-41
852 684-41
Steel shelf*
720 x 560 x 32
150
852 685-35
Steel shelf
720 x 560 x 32
150
852 665-35
Bottom shelf with
rubber mat
Extendable shelf*
720 x 580 x 33
50
852 687-35
Wash basket L-300
380 x 302 x 110
20
839 116-51
Waste basket
839 159-00
Waste basket holder
Paper roll holder
835 773-35
860 310-35
Roll dimensions max:
width 240 mm, Ø 230 mm)
Basic trolley 3
Basic trolley 4
M750
Trolleys can be combined with all the M750 accessories. For perforated
panels, see p. 105, for R-hooks, see p. 106.
125
Basic trolley 5
Basic trolley frame
Ergonomic workspaces product catalogue 2014-2015
TROLLEYS Basic trolley
1625
*including brackets
69
Adjustable trolley TRTA
For general use in workshops, offices, production areas and hospitals.
Epoxy powder coated RAL 7035 ESD shelves, depth 28 mm. All
shelves are individually adjustable. The structure is light but sturdy. The
end-frames of the trolley are made of round, powder coated steel
tube (25 mm). Four turning castors (Ø 125 mm), two of which have
brakes.
Adjustable trolley TRTA
Name
Size
W x D x H mm
Shelf size
W x D mm
2-shelf trolley*
890 x 530 x 1020 800 x 430
150
TRTA4082 TRTA4082 ESD
2-shelf trolley*
1090 x 530 x 1020 1000 x 430 150
TRTA4102 TRTA4102 ESD
2-shelf trolley*
890 x 630 x 1020
150
TRTA5082 TRTA5082 ESD
2-shelf trolley*
1090 x 630 x1020 1000 x 530 150
TRTA5102 TRTA5102 ESD
4-shelf trolley** 1090 x 530 x 1515 1000 x 430 300
TRTA4104 TRTA4104 ESD
4-shelf trolley** 1090 x 630 x 1515 1000 x 530 300
TRTA5104 TRTA5104 ESD
800 x 530
Max
Code
load kg
Code ESD
* Shelf adjustments between 200-770 mm
** Shelf adjustments between 215-1340 mm
Extra shelves TRHA
Name
Shelf size
W x D mm
Max load kg
Extra shelf
800 x 430
50
TRHA408
TRHA408 ESD
Extra shelf
1000 x 430
50
TRHA410
TRHA410 ESD
Extra shelf
800 x 530
50
TRHA508
TRHA508 ESD
Extra shelf
1000 x 530
50
TRHA510
TRHA510 ESD
Code
Code ESD
End mesh panels NET2
Name
Size W x D mm
Set
Code
Code ESD
End mesh panel
604 x 364
Incl. 2 panels
NET2
NET2 ESD
The mesh panels can be installed at the ends of the trolley or on the sides. An angle bracket
is set on the edge of the upper and lower shelf and the mesh is screwed into place. The
4-shelf trolley can hold 2 mesh panels on top of each other.
TROLLEYS Adjustable trolley TRTA
Document holder DSA4
Name
Size
Code
Code ESD
Document holder
A4
DSA4
DSA4 ESD
Semiconductive epoxy powder coated steel. Includes two magnets.
Document holder
70
Ergonomic workspaces product catalogue 2014-2015
Reel holder trolley RRT
The adjustable reel holder trolley is compatible with SMD
reels, and suitable for transport and stocking of them. All
parts are powder coated steel, RAL 7035 ESD. The trolley
has four perforated steel shelves, depth 28 mm. All shelves
are individually adjustable.
3
The reel racks that fit into the shelves are to be ordered
separately. The structure is light but sturdy. The end-frames
of the trolley are made of round, powder coated steel tube
(25 mm). Four turning castors (Ø 125 mm), two of which
have brakes. The load capacity of one shelf is 50 kg, and
the load capacity of the trolley is 200 kg.
Reel holder trolley RRT
Name
Size
W x D x H mm
Max
load kg
1. Reel holder trolley
1100 x 530 x 1780
200
RRT ESD
2. Reel rack
960 x 426 x 254
50
RR ESD
3. Document holder
A4
Code ESD
DSA4 ESD
2
1
B
TROLLEYS Reel holder trolley RRT
A
In picture A: Side view of spools and reel racks. The
capacity of one rack is 30 fixed compartments for 7” spools
of 60 mm width.
In picture B: Side view of spools and reel racks. The capacity
of one rack is15 fixed compartments for 13” and 15”
spools of 60 mm width.
Ergonomic workspaces product catalogue 2014-2015
71
Mobile workstation MLC
A laptop computer can be used either on the work surface or housed
in the enclosure underneath. In the latter case only the screen is visible
and a separate keyboard can be kept on a keyboard and mouse tray
(optional accessory) keeping the worksurface clear. The worksurface is
surrounded by a Euro rail for mounting accessories.
Mobile workstation MLC
Name
Size
W x D x H mm
Code
Mobile workstation
590 x 540 x 800-1200
MLC405 G
Top size 520 x 370 mm.
4
1
2
3
5
6
7
TROLLEYS Mobile workstation MLC
Mobile workstation accessories
72
Name
1. Keyboard and mouse tray
210 x 620 mm. Equipped with a wrist support.
Code
KH620
2. Binder mount
Fits a single 75 mm wide binder.
FH1
3. Binder mount
Fits three 75 mm wide binders.
FH3
4. Accessories basket
5. LCD bracket
AB1930
MH
6. LCD swivel arm
Blue bin, int. dim. 230 x 155 x 140 mm
Load capacity 15 kg, mounting holes
75 x 75 / 100 x 100 apart
For the attachment of MH and MY supports. Max 22” screen.
MS
7. Tablet bracket
For 7-10” tablets. Requires either an MH, MA or MA2 swivel arm.
MY
Ergonomic workspaces product catalogue 2014-2015
Trolleys for additional workspace
Storage trolley is an easy solution for mobile storage, the
storage trolley has an adjustable middle shelf, and the shelves
are fitted with standard rubber mats.
1.
Ergo trolley provides extra workspace for the Concept
workbench. Lower shelf is available separately. Height
adjustment with allen key between 650-900 mm.
SAP trolley provides extra workspace for the TP workbench.
Lower shelf is available separately. Height adjustment with allen
key between 650-900 mm.
CTR trolley provides extra workspace for the WB workbench.
Lower shelf is integrated. Height adjustment with allen key
between 690-990 mm.
Storage trolley
2.
Trolleys for additional workspace
Name
Size
W x D x H mm
1. Storage trolley
2. Ergo trolley
650 x 450 x 775 3 x 30
750 x 500 x
150
650-900
852 773-41 852 773-35
860 422-35
595 x 480
-
3. SAP trolley
SAP trolley
Code ESD
Ergo trolley
860 425-35
700 x 500
150
SAP507
SAP507 ESD
1000 x 700
150
SAP710
SAP710 ESD
SAP trolley
1500 x 700
150
SAP715
SAP715 ESD
Lower shelf for
SAP trolley
700 x 500
40
AT507
AT507 ESD
Lower shelf for
SAP trolley
1000 x 700
40
AT710
AT710 ESD
Handle for SAP trolley depth 500
PUSH50
PUSH50
Handle for SAP trolley depth 700
PUSH70
PUSH70
CTR705
CTR705 ESD
4. CTR trolley
700 x 500
75 /
shelf
3.
All the light-duty trolleys are equipped with four swivel castors (ø 100 mm), two of
which have brakes. ESD versions are also available.
SAP trolley
4.
TROLLEYS Trolleys for additional workspace
Lower shelf for
Ergo trolley
Max
Code
load kg
CTR trolley
Ergonomic workspaces product catalogue 2014-2015
73
74
Ergonomic workspaces product catalogue 2014-2015
Drawer units
Ergonomic workspaces product catalogue 2014-2015
75
Versatile drawer units
Since work is not always performed in the same place, we provide a comprehensive range of different drawer units
for a variety of purposes. You can fix any drawer unit from the same series under a worktop or on a plinth, or equip
them with castors to take along to your next workstation.
Efficient storage and control
Our drawer units are great for storing tools and supplies. It
is surprising how much time is spent finding tools and other
items if they are not stored systematically. The versatile
interior combinations of our drawer units guarantee that
your supplies are always at hand and in good order.
DRAWER UNITS
A comprehensive range of drawer units
76
We promise that you will find a drawer unit that meets
your requirements in our comprehensive range. You
can choose from several different heights and drawer
and interior combinations. We have selected some
combinations for this brochure. For more options, please
contact: [email protected]
Drawer units for light loads
These drawer units are designed for storing lightweight
items, for example in a testing laboratory or in an office
environment.
Ergonomic workspaces product catalogue 2014-2015
Drawer units 30 and 35
These steel cabinets are an ideal way of providing
individual secure storage for your staff. Drawers are
mounted on telescopic ball race slides. Four cabinet sizes,
including one drawer/cupboard combination.
These drawer units are fastened under a workbench to
provide storage space. Choose from single drawer, two
drawers or drawer cabinet. If additional drawers are
needed, they can be easily attached to each other. The
drawers can be locked to protect the contents.
Drawer unit 45
Drawer unit 75
Choose from two frame heights: 56 or 66 cm, with a
plinth for a stand alone solution or with castors for a trolley
version. The drawer unit 45 can also be attached under
the worktop. All the drawer units have central locking.
Choose from two frame heights: 56 or 66 cm, with a plinth
for the stand alone solution or with castors for a trolley
version. All the drawer units have central locking.
Ergonomic workspaces product catalogue 2014-2015
DRAWER UNITS
Light steel cabinet LMC
77
Three-level locking system
The majority of our drawer units and cabinets can be equipped with a three-level locking system. This allows
both serialisations of individual and identical locks. Contact your Treston Group representative for additional
information. The locking services are always specified for the order.
Department
ABCDEFGH
Team ABCD
A
B
C
Department AB
D
E
F
G
H
A
A
A
Team B
A
B
B
B
B
Serialisation of individual locks
Serialisation of identical locks
Each drawer or cabinet has an individual lock in a
production unit, but a master key opens all the locks of
the unit. The master keys can also be serialised and the
third-level key opens all the drawers and cabinets of all
the production units.
Each team member needs only one key to access all the
drawers and cabinets in a production unit. A master key
opens all the drawers and cabinets of all the production
units and can also be serialised.
DRAWER UNITS
78
Team A
Team EFGH
Ergonomic workspaces product catalogue 2014-2015
Light steel cabinet LMC
These steel cabinets are an ideal way of providing individual
secure storage for your staff. Drawers are mounted on
telescopic ball race slides. Four cabinet sizes, including
one drawer/cupboard combination. These cabinets suit
any Treston Group workbenches. The cabinet frames are
epoxy powder coated steel; drawer fronts are composite
board with aluminium handles. Colour light grey, RAL
7035. Mount on benches with brackets (included).
Suitable for WB/TP
workbenches and
SAP710/SAP715/
WTR trolleys
Light steel cabinet, load capacity 15 kg/drawer
Code
LMC01
LMC02
LMC04
LMC04D
Code ESD
LMC01 ESD
LMC02 ESD
LMC04 ESD
LMC04D ESD
Outer dims W x D x H mm
370 x 460 x 140
370 x 460 x 245
370 x 460 x 455
370 x 460 x 455
Includes drawers
(outer height mm)
1 x 100
2 x 100
4 x 100
1 x 100 + cupboard, height
300 mm, open to right
Internal drawer dimensions: 278 x 438 x 75
Cover LMCK2
Description
Code
Needed for mounting cabinets to WB benches and WTR trolley.
LMCK2
These drawer units are fastened under a workbench to
provide storage space. Choose from single drawer, two
drawers or drawer cabinet. If additional drawers are
needed, they can be easily attached to each other. The
drawers can be locked to protect the contents.
Drawer cabinet 35/47 is suitable
for storing upright folders.
Drawer units 30 and 35, load capacity 10 kg/drawer
30/15
30/22
35/47
Code
859 330-35
859 340-35
860 972-35
Outer dims W x D x H mm
300 x 454 x 150
300 x 454 x 220
350 x 470 x 470
Includes drawers
(outer height mm)
1 x 100
2 x 100
1 x 100
+ cupboard , height
Internal drawer dimensions: 255 x 400 x 120 / 300 x 400 x 70
Fastening sets for drawer units 30 and 35 The fastening set should be selected according to the type of the bench.
Depth
600 mm
700 mm
750 mm
900 mm
Concept workbench
860 931-35
-
860 930-35
860 239-35
Concept workbench with crank
-
-
860 930-35
-
TP workbench
-
855 054-35
-
855 054-35
DRAWER UNITS Light steel cabinet LMC, drawer units 30 and 35
Drawer units 30 and 35
Fastening set for the Concept motor bench (all drawer units) 854 463-35. Not adapted to Concept hand crank bench (depth 600 mm).
Ergonomic workspaces product catalogue 2014-2015
79
Drawer unit 45
Centrally locked high quality steel drawer units for
storage of tools and small components. Mounted under
workbenches with brackets. Also available with castors as
a trolley version. Drawer units are epoxy powder coated in
grey, RAL 7035. Central locking. Full width drawer handle
in anodised aluminium. Smooth and quiet telescopic ballrace runners and clear opening of 375 mm. Load capacity
30 kg/drawer. Drawer size 380 x 500 mm.
660/760 mm
700 / 800 mm
560 / 660 mm
All of our drawer units are also available as 100%
extendable versions with a load-bearing capacity of 60
kg/drawer. Our drawer units are suitable for use in EPAs.
Our mobile trolleys are available in both ESD and nonESD versions.
0
52
mm
450 mm
Choose the drawer unit according
to your needs; with castors, plinth or
no plinth.
Load capacity 150 kg, 4 swivel castors
(ø 100 mm), 2 with brakes. The trolley
version comes with a rubber mat that
stops items from sliding on the surface.
Combination name
Bold font indicates
that the product
is available
from stock.
45/56-1
Width
Height
Version
DRAWER UNITS Drawer unit 45
Drawer unit 45/56, 75% opening, load capacity 30 kg/drawer
L-45/56-1
L-45/56-2
L-45/56-3
L-45/56-4
L-45/56-7
L-45/56-11
Standard
606 35 001
606 35 002
606 35 003
606 35 004
606 35 007
606 35 0011
With plinth
606 35 011
606 35 012
606 35 013
606 35 014
606 35 017
606 35 0021
With castors
606 35 021
606 35 022
606 35 023
606 35 024
606 35 027
-
Height (mm) of the drawer
5 x 100
2 x 100
3 x 100
1 x 100
2 x 150
1 x 200
2 x 150
1 x 200
2 x 200
1 x 200
1 x 300
Internal drawer dimensions: 380 x 500 x 90/140/190 mm.
Drawer unit 45/66, 75% opening, load capacity 30 kg/drawer
Standard
L-45/66-1
L-45/66-2
L-45/66-3
L-45/66-4
L-45/66-5
L-45/66-6
L-45/66-7
607 35 001
607 35 002
607 35 003
607 35 004
607 35 005
607 35 006
607 35 007
With plinth
607 35 011
607 35 012
607 35 013
607 35 014
607 35 015
607 35 016
607 35 017
With castors
607 35 021
607 35 022
607 35 023
607 35 024
607 35 025
607 35 026
607 35 027
Height (mm) of the drawer
6 x 100
3 x 100
1 x 100
4 x 150
4 x 100
2 x 100
3 x 200
2 x 150
2 x 150
1 x 200
2 x 200
1 x 200
Internal drawer dimensions: 380 x 500 x 90/140/190 mm.
80
Ergonomic workspaces product catalogue 2014-2015
Drawer unit 45/56, 100% opening, load capacity 60 kg/drawer
45/56-1
45/56-2
45/56-3
45/56-4
45/56-7
45/56-10
45/56-11
Standard
606 35 101
606 35 102
606 35 103
606 35 104
606 35 107
606 35 110
606 35 111
With plinth
606 35 201
606 35 202
606 35 203
606 35 204
606 35 207
606 35 210
606 35 211
With castors
606 35 301
606 35 302
606 35 303
606 35 304
606 35 307
-
-
Height (mm) of the drawer
5 x 100
2 x 100
3 x 100
1 x 100
2 x 150
2 x 100
1 x 200
2 x 150
1 x 200
2 x 200
1 x 200
1 x 300
1 x 300
45/66-4
45/66-5
45/66-6
45/66-7
Internal drawer dimensions: 380 x 500 x 90/140/190/290 mm.
Drawer unit 45/66, 100% opening, load capacity 60 kg/drawer
45/66-1
45/66-2
45/66-3
Standard
607 35 101
607 35 102
607 35 103
607 35 104
607 35 105
607 35 106
607 35 107
With plinth
607 35 201
607 35 202
607 35 203
607 35 204
607 35 205
607 35 206
607 35 207
With castors
607 35 301
607 35 302
607 35 303
607 35 304
607 35 305
607 35 306
607 35 307
Height (mm) of the drawer
6 x 100
3 x 100
1 x 100
4 x 150
4 x 100
2 x 100
3 x 200
2 x 150
2 x 150
1 x 200
2 x 200
1 x 200
Internal drawer dimensions: 380 x 500 x 90/140/190 mm.
Drawer unit 45/66, 100% opening, load capacity 60 kg/drawer
Internal drawer dimensions mm
45/66-12
45/66-13
45/66-14
45/66-15
Width 380
Depth 500
Standard
607 35 112
607 35 113
607 35 114
607 35 115
Outer height mm
Inner height mm
With plinth
607 35 212
607 35 213
607 35 214
607 35 215
100
90
Height (mm) of the
drawer
3 x 100
2 x 150
1 x 100
2 x 300
150
140
200
190
300
290
1 x 300
1 x 300
1 x 200
1 x 300
!
Drawer units with castors are also
available as non ESD-versions
(code 41 instead of 35).
Cabinets include one bottom shelf and one
adjustable shelf, shelf load capacity 50 kg.
560/660 mm
Cabinet 45/56, door right
Drawer cabinet 45/66, door right
w/o lock
with lock
drawer 1 x 100 w/o lock
with lock
Standard
606 35 105
606 35 108
Standard
607 35 110
With plinth
606 35 205
606 35 208
With plinth
607 35 208
607 35 210
With castors
606 35 305
606 35 308
With castors
607 35 308
607 35 310
Cabinet 45/56, door left
607 35 108
Drawer cabinet 45/66, door left
w/o lock
with lock
drawer 1 x 100 w/o lock
with lock
Standard
606 35 106
606 35 109
Standard
607 35 109
607 35 111
With plinth
606 35 206
606 35 209
With plinth
607 35 209
607 35 211
With castors
606 35 306
606 35 309
With castors
607 35 309
607 35 311
Ergonomic workspaces product catalogue 2014-2015
DRAWER UNITS Drawer unit 45
Internal drawer dimensions: 380 x 500 x 90/140/190/290 mm.
81
Drawer units 45/14 and 45/26
Opening
Load capacity
kg / drawer
Outer dims
W x D x H mm
Height (mm)
of the drawer
Code
45/14-1
100%
60
450 x 520 x140
1 x 100
603 35 001
L-45/14-1
75%
30
450 x 520 x140
1 x 100
603 35 002
45/26-1
100%
60
450 x 520 x 260
2 x 100
604 35 001
L-45/26-1
75%
30
450 x 520 x 260
2 x 100
604 35 002
Model
Internal drawer dimensions: 380 x 500 x 90 mm.
Fastening sets for drawer unit 45
The maximum
load capacity of
100% extendable
drawers is
60 kg!
The fastening set should be selected according to the type of the bench. For WB/TP benches
brackets are included.
600 mm
Concept workbench 860 931-35
700 mm
-
750 mm
900 mm
860 930-35
860 239-35
Fastening set for the Concept motor bench (all drawer units) 854 463-35. Not adapted to
Concept handcrank bench or Concept motor bench (depth 600 mm).
For heavy loads we recommend adding a plinth or castors to the cabinet.
Cover
Description
Order no
Needed for mounting from-stock sortiment’s drawers to WB benches.
855 060-35
A fully extendable drawer is perfect for laboratory use, for example.
Combination name
Horizontal dividers
4 x horizontal divider
Order no
Drawer 45/100
872 982-35
Drawer 45/150 and 45/200
872 983-35
45/56-1
Width
Height
Version
mm
750 mm
Trolley model: load capacity 150 kg,
4 swivel castors (ø 100 mm), 2 with
brakes. The trolley version comes with a
rubber mat that stops items from sliding
on the surface.
Ergonomic workspaces product catalogue 2014-2015
750 mm
Choose the drawer unit according
to your needs; with castors, plinth
or no plinth.
560/660 mm
660/760 mm
700/800 mm
0
82
Choose from two frame heights: 56 or 66 cm, with plinth for a stand alone solution or with castors for a trolley version. All
the drawer units have central locking.
52
DRAWER UNITS Drawer unit 45, drawer unit 75
Drawer unit 75
750 mm
Cabinets include a bottom shelf and
one adjustable shelf. Shelf load
capacity 50 kg.
Drawer unit 75/56, 100 % opening, load capacity 60 kg/drawer
75/56-1
75/56-2
75/56-3
75/56-4
75/56-7
Standard
608 35 101
608 35 102
608 35 103
608 35 104
608 35 107
With plinth
608 35 201
608 35 202
608 35 203
608 35 204
608 35 207
With castors
608 35 301
608 35 302
608 35 303
608 35 304
608 35 307
Height (mm) of the drawer
5 x 100
2 x 100
3 x 100
1 x 100
2 x 150
2 x 150
1 x 200
2 x 200
1 x 200
Internal drawer dimensions: 670 x 500 x 90/140/190 mm.
Drawer unit 75/66, 100 % opening, load capacity 60 kg/drawer
75/66-1
75/66-2
75/66-3
75/66-4
75/66-5
75/66-6
75/66-7
Standard
609 35 101
609 35 102
609 35 103
609 35 104
609 35 105
609 35 106
609 35 107
With plinth
609 35 201
609 35 202
609 35 203
609 35 204
609 35 205
609 35 206
609 35 207
With castors
609 35 301
609 35 302
609 35 303
609 35 304
609 35 305
609 35 306
609 35 307
Height (mm) of the drawer
6 x 100
3 x 100
1 x 100
4 x 150
4 x 100
2 x 100
3 x 200
2 x 150
2 x 150
1 x 200
2 x 200
1 x 200
Internal drawer dimensions: 670 x 500 x 90/140/190 mm
Cabinet 75/56 double-door
w/o lock
with lock
Standard
608 35 105
608 35 106
With plinth
608 35 205
608 35 206
With castors
608 35 305
608 35 306
!
The maximum
load capacity of
100% extendable
drawers is
60 kg!
Drawer cabinet 75/66 double-door
drawer 1 x 100
w/o lock
with lock
Standard
609 35 108
609 35 109
With plinth
609 35 208
609 35 209
With castors
609 35 308
609 35 309
Drawer units with castors are also available
as non ESD-versions (code 41 instead of 35).
Fastening sets for drawer unit 75
The fastening set should be selected according to the type of workbench
TP workbench
-
700 mm
855 055-35
750 mm
900 mm
860 930-35 860 239-35
-
855 055-35
Fastening set for the Concept motor bench (all drawer units) 854 463-35. Not
adapted to Concept handcrank bench or Concept motor bench (depth 600 mm).
For heavy loads we recommend adding a plinth or castors to the cabinet.
In the picture, the drawer unit 75/66 double door with
a 100 mm drawer.
Horizontal dividers
Vertical dividers
4x horizontal divider
3x vertical divider
Drawer 75/100
872 985-35
Drawer 75/100
872 988-35
Drawer 75/150
872 986-35
Drawer 75/150
872 989-35
Drawer 75/200
872 986-35
Drawer 75/200
872 989-35
Ergonomic workspaces product catalogue 2014-2015
DRAWER UNITS Drawer unit 75
600 mm
Concept workbench 860 931-35
83
84
Ergonomic workspaces product catalogue 2014-2015
Shelves and cabinets
Ergonomic workspaces product catalogue 2014-2015
85
There’s a place for each item
Shelving units and cabinets are an essential element
in keeping the workplace tidy and in good order.
Shelving units can also be used as room divider
elements and are available with ESD protection.
Extended tool life
SHELVES AND CABINETS
The service life and condition of tools can be significantly
improved through their appropriate storage. They are
stored in their own places, protected from dust and dirt,
in a locked cabinet.
86
A versatile storage solution is created
by using suitable accessories
An open shelf is not always the best way to store things.
Tools, expensive equipment, and small items need another
type of solution. Through using lockable drawers or adding
doors and walls, an open shelving system is turned into
a versatile storage solution. Drawers can be fitted with a
variety of interior combinations, to suit the tools stored in
them.
Ergonomic workspaces product catalogue 2014-2015
The Treston Group storage system is
modifiable
Our storage system is built around the basic component,
and extension parts, doors, screens, and other accessories
can be added to create an efficient overall solution.
In addition the shelf heights can easily be adjusted as
needed. Even the load capacity can be increased by
adding additional supports.
Treston Group industrial cabinets allow
for a tidy, efficient working environment
No unnecessary time should be used looking for tools
and materials. This interrupts work and causes stress. In a
well organised cabinet, everything is where it should be.
SHELVES AND CABINETS
A ready-assembled cabinet is easy to move to the
most convenient location. There are adjustable glides
underneath that make it easy to adjust the cabinet so
that it stands straight on uneven surfaces. All M750 and
accessories, such as shelves, drawer units, perforated
panels, and extendable shelves, can be used in selecting
accessories for the cabinet.
Ergonomic workspaces product catalogue 2014-2015
87
Storage system
The Treston Group storage system can be built as a
combination of cabinets and shelves and you can use it
as a space divider. The storage system is available in two
standard heights, 200 cm and 240 cm and two widths,
80 cm and 100 cm.
1. Standard parts
Name
Size W x D x H mm
Standard part 80/30/200
824 x 300 x 2000
C 313 35 001
Standard part 80/40/200
824 x 400 x 2000
C 314 35 001
Standard part 100/30/200
1024 x 300 x 2000
C 313 35 002
Standard part 100/40/200
1024 x 400 x 2000
C 314 35 003
Standard part 100/50/200
1024 x 500 x 2000
C 315 35 001
Standard part 100/60/200
1024 x 600 x 2000
C 316 35 001
Code
Standard part 80/40/240
824 x 400 x 2400
C 314 35 002
Standard part 100/40/240
1024 x 400 x 2400
C 314 35 004
Standard part 100/50/240
1024 x 500 x 2400
C 315 35 002
Standard part 100/60/240
1024 x 600 x 2400
C 316 35 002
2. Extension parts
1
2
Load capacity 1000 kg/part
150 kg/shelf
width 824 mm
Name
Size W x D x H mm
Code
Extension part 80/30/200
804 x 300 x 2000
C 323 35 001
Extension part 80/40/200
804 x 400 x 2000
C 324 35 001
Extension part 100/30/200
1004 x 300 x 2000
C 323 35 002
Extension part 100/40/200
1004 x 400 x 2000
C 324 35 003
Extension part 100/50/200
1004 x 500 x 2000
C 325 35 001
Extension part 100/60/200
1004 x 600 x 2000
C 326 35 001
Extension part 80/40/240
804 x 400 x 2400
C 324 35 002
Extension part 100/40/240
1004 x 400 x 2400
C 324 35 004
Extension part 100/50/240
1004 x 500 x 2400
C 325 35 002
Extension part 100/60/240
1004 x 600 x 2400
C 326 35 002
All standard and extension parts include 6 shelves.
150 kg/shelf
width 1024 mm
Storage cabinets
The W x D x H rule
!
SHELVES AND CABINETS Storage system
All our dimensions follow a WDH rule, where the first
dimension is the width (W), the middle the depth (D),
and the last the height (H).
Qty Name
Size mm
Code blue
Code light grey
1
Storage cabinet 1024 x 400 x 2000 C 344 07 000 C 344 35 000
4
Shelf
1000 x 400
852 231-35
852 231-35
2. 100/40/200-4
C 344 07 004 (blue), C 344 35 004 (light grey)
Qty Name
2
Ergonomic workspaces product catalogue 2014-2015
Size mm
Code blue
Code light grey
1
Storage cabinet 1024 x 400 x 2000 C 344 07 000 C 344 35 000
2
Shelf
852 231-35
852 231-35
2
Perforated panel 983 x 500
852 145-07
852 145-35
3
Drawer 400
834 513-35
834 513-35
!
1
88
1. 100/40/200-1
C 344 07 001 (blue), C 344 35 001 (light grey)
1000 x 400
Move with a pallet truck
The cabinet can be moved with a pallet truck or a forklift
when the plinth front panel has been removed. Cabinets are
equipped with adjustment screws.
The Treston Group storage system includes a wide range of different
parts which can be used to create a fully tailor-made solution.
Perforated plate
Steel divider pair
Drawer
Cross
support pair
Back
sheet
Door pair
Steel divider
Shelf
End frame, closed
End frame,
open
Shelves
Name
Size W x D mm
Code
Name
Size W x D mm
Max load kg
Code
End frame, open
300 x 2000
830 615-35
Shelf
800 x 300
150
852 235-35
End frame, open
400 x 2000
830 895-35
Shelf
800 x 400
150
852 234-35
Sidewall
400 x 2000
859 440-35
Shelf
1000 x 300
150
852 175-35
End frame, open
500 x 2000
851 719-35
Shelf
1000 x 400
150
852 231-35
Sidewall
500 x 2000
859 450-35
Shelf
1000 x 500
150
852 185-35
End frame, open
600 x 2000
851 725-35
Shelf
1000 x 600
150
852 187-35
Sidewall
600 x 2000
859 460-35
End frame, open
400 x 2400
851 717-35
End frame, open
500 x 2400
851 721-35
End frame, open
600 x 2400
851 724-35
Shelf dividers
852 176-35
Name
Size W x D mm
Cabinet 100/40/200
1030 x 430 x 2010
C 344 07 000
Pair of steel dividers
190 x 285
861 116-35
Cabinet 100/50/200
1030 x 530 x 2010
C 345 07 000
Shelf divider 400
400 x 180
832 839-35
Cabinet 100/60/200
1030 x 630 x 2010
C 346 07 000
Shelf divider 400
400 x 260
832 847-35
859 447-35
Shelf divider 400
400 x 370
832 855-35
830 917-07
Shelf divider 500
500 x 260
852 271-35
838 440-51
Shelf divider 500
500 x 370
852 273-35
852 145-07
Shelf divider 600
600 x 260
852 797-35
852 267-35
Shelf divider 600
600 x 370
852 798-35
Cross support pair 1000
Back sheet 1000
Perforated end plate 400
340 x 2000
Screw set (fixing back to back)
Perforated panel 1000
983 x 500
Additional support for shelf 1000
Code
Drawers and interior combinations
Name
Size W x D x H mm Max
load kg
Code
Drawer 100/100, for 400 deep cabinet
920 x 345 x 107
30
834 513-35
Drawer 100/100, for 500 deep cabinet
920 x 345 x 107
30
834 514-35
1 Middle divider and middle plates
834 507-35
2 Middle divider and middle plates
834 508-35
3 Middle divider and middle plates
834 509-35
4 Pick up bins
834 512-00
1
2
3
4
Ergonomic workspaces product catalogue 2014-2015
SHELVES AND CABINETS Storage system
Storage system components
89
Industrial cabinets
A versatile storage solution can be created using the appropriate accessories. Treston Group industrial cabinets include a
wide range of accessories e.g. for tool storage.
SHELVES AND CABINETS Industrial cabinets
Industrial cabinet combinations
55/100-1 C 301 07 001
80/100-1 C 305 07 001001
80/100-2 C 305 07 002
Qty
Name
Code
Qty
Name
Code
Qty
Name
Code
1
Cabinet frame 55/100
C 301 07 000
1
Cabinet frame 80/100
C 305 07 000
1
Cabinet frame 80/100
C 305 07 000
2
Steel shelf 55
854 349-35
2
Steel shelf 80
854 345-35
2
Steel shelf 80
854 345-35
1
Drawer 80
854 346-35
Combination name
55/100-1
Width cm
Height cm
Version
Depth of cabinet: 425 mm
90
Ergonomic workspaces product catalogue 2014-2015
!
Practical!
100 cm high cabinets have a
backstop and rubber mat to be
used as an additional work top.
Computer cabinet
Computer cabinet protects equipment from dust and dirt, even
in the most demanding conditions. The computer cabinet is
pressurised and equipped with an air filter that keeps the dust
out. A screen up to a maximum size of 19” will fit in the computer
cabinet.
Computer cabinets
Size W x D x H mm Code
Computer cabinet
800 x 500 x 1600 854 358-35
Computer cabinet
(without the energy rail)
800 x 500 x 1600 854 364-35
55/160-1 C 303 07 001
80/160-1 C 307 07 001
80/160-2 C 307 07 102
Qty Name
Code
Qty Name
Code
Qty Name
Code
1
Cabinet frame 55/160
C 303 07 000
1
Cabinet frame 80/160
C 307 07 000
1
Cabinet frame 80/160
C 307 07 000
3
Steel shelf 55
854 349-35
3
Steel shelf 80
854 345-35
2
Steel shelf 80
854 345-35
4
Bin rail, M750
859 151-35
21
Stacking bin
1015-5
5
Stacking bin
1525-5
80/160-3 C 307 07 003
Qty Name
Code
1
Cabinet frame 80/160
C 307 07 004
3
Steel shelf 80
854 345-35
1
Extendable shelf 80
854 347-35
Ergonomic workspaces product catalogue 2014-2015
SHELVES AND CABINETS Industrial cabinets
Name
91
SHELVES AND CABINETS Industrial cabinets
!
92
Move with a pallet truck
The cabinet can be moved with
a pallet truck or a forklift when
the plinth front panel has been
removed. Cabinets are equipped
with adjustment screws.
80/200-3 C 309 07 103
80/200-1 C 309 07 001
80/200-2 C 309 07 102
Qty Name
Qty Name
Code
Code
1
Cabinet frame 80/200 C 309 07 000
1
Cabinet frame 80/200
C 309 07 000
4
Steel shelf 80
2
Drawer 80
854 346-35
2
Steel shelf 80
854 345-35
5
Stacking bin
1525-5
1
Bin rail, M750
859 151-35
1
Extendable shelf 80
854 347-35
1
Perforated panel 736 x 640 835 633-07
2
Perforated panel 288 x 712 854 353-07
1
Pair of support feet
854 345-35
80/200-4 C 309 07 004
Qty Name
Code
1
Cabinet frame 80/200
C 309 07 000
2
Drawer 80
854 346-35
2
Steel shelf 80
854 345-35
3
Shelf divider H 370/400
832 855-35
1
Perforated panel 736 x 640
835 633-07
1
Extendable shelf 80
854 347-35
1
Pair of support feet
864 730-35
1
Pair of steel dividers
861 116-35
1
Drawer for suspension folders
854 348-35
Ergonomic workspaces product catalogue 2014-2015
Includes 2 pcs steel shelves 80 , 854 345-35.
!
An extendable shelf for
the cabinet
When the cabinet is used for storing
folders, a separate extending shelf is
a good idea. This shelf makes it easy
to browse through the folders.
864 730-35
Industrial cabinet accessories
Cabinet frames
All the M750 accessories fit the cabinet 80
and can be easily installed inside.
Name
Size W x D x H mm
Code
Cabinet 55/100 •
550 x 425 x 1000
C 301 07 000
Cabinet 80/100
800 x 425 x 1000
C 305 07 000
Cabinet 55/160
550 x 425 x 1600
C 303 07 000
Cabinet 80/160
800 x 425 x 1600
C 307 07 000
Cabinet 80/160, half doors
800 x 425 x 1600
C 307 07 004
Cabinet 80/200
800 x 425 x 2000
C 309 07 000
Cabinet accessories
Name
Size
W x D x H mm
Max
Code
load kg
Perforated panel for the door or side wall
280 x 740
854 353-07
Perforated panel for the back wall M500
487 x 295
860 951-35
Perforated panel for the back wall M750
736 x 640
835 633-35
Perforated panel for the back wall M750
718 x 1003
835 641-35
Pair of steel dividers
1 x 285 x 190
861 116-35
Steel shelf 55
545 x 391 x 32
100
854 349-35
Steel shelf 80
730 x 396 x 32
100
854 345-35
Shelf divider
1 x 400 x 180
832 839-35
Shelf divider
1 x 400 x 260
832 847-35
Shelf divider
1 x 400 x 370
832 855-35
Extendable shelf 80
730 x 362 x 42
30
854 347-35
Drawer 55 •
480 x 362 x 90
30
854 344-35
Drawer 80
730 x 362 x 90
30
854 346-35
Drawer for suspension folders
724 x 350 x 240 30
854 348-35
Pair of support feet
40 x 220 x 6
Bin rails M750
742 x 100
864 730-35
859 151-35
Spare parts for industrial cabinets
Cabinet spare parts
Product
Code
Rubber mat 550 x 420
Industrial cabinet 55/100
836 716-00
Rubber mat 799 x 420
Industrial cabinet 80/100
836 715-00
• = non stock item
Name
Ergonomic workspaces product catalogue 2014-2015
SHELVES AND CABINETS Industrial cabinets
50
93
Shelf cabinets
High-quality shelf cabinet is made of semiconductive
epoxy powder coated, profiled steel, light grey RAL
7038. Standard fittings: cabinet lock with two keys, sturdy
double leaf-doors, 2 or 4 shelves, adjustable feet and
cabinet base of steel. The robust base is welded together.
The cabinet unit can be moved with a pallet truck or a
forklift when the plinth front plate has been removed. This
cabinet is pre-assembled.
Shelf cabinets
Name
Shelves
number
Size
W x D x H mm
Max load Code ESD
kg / shelf
Shelf cabinet
2
800 x 425 x 1000 100
C 305 35 001
Shelf cabinet
4
800 x 425 x 2000 100
C 309 35 001
Shelf cabinet accessories
Name
!
Max
load kg
100
Steel shelf 80
730 x 396 x 32
Perforated panel
736 x 640
Drawer 80
730 x 362 x 90 (outer)
Code ESD
854 345-35
835 633-35
30
854 346-35
More accessories on page 93
Industrial cabinet accessories suit also shelf cabinets.
Light shelf cabinets
SHELVES AND CABINETS Shelf cabinets, light shelf cabinets
94
Size
W x D x H mm
Designed for use in light storage. This cabinet is flat
packed in an individual carton with all necessary fittings
and instructions. Steel cabinets are epoxy powder coated
in light grey. The shelves can be adjusted on 50 mm
centres. Standard fittings: Locking bar system, steel double
doors, 2 or 3 shelves and cabinet base.
Light shelf cabinets
Name
Shelves
number
Size
W x D x H mm
Max load Code ESD
kg / shelf
Shelf cabinet
2
915 x 460 x 1015 50
HK100 ESD
Shelf cabinet
3
915 x 460 x 1830 50
HK180 ESD
Shelf cabinet accessories
Ergonomic workspaces product catalogue 2014-2015
Name
Size
W x D mm
Extra shelf
Perforated panel
910 x 385
880 x 550
Max
load kg
Code
Code ESD
RLHK49
H49 K ESD
RLHK49 ESD
Small parts shelving
Shelving unit
Extension unit
An ESD protected, effective storage system. Shelving unit includes 6 adjustable shelves. Small parts shelving with accessories
are of semiconductive epoxy powder coated steel in light grey RAL 7035. Earth via protective 1 megohm resistor. Height
2020 mm, length 1040 mm. Extension unit includes 6 adjustable shelves.
Accessories
Name
Size
W x D x H mm
Max load kg /
one shelf
Code ESD
Name
Size
W x D mm
Max load kg /
one shelf
Code ESD
Shelving unit
1040 x 410 x 2020
150
PH410 ESD
Extra shelf
1000 x 400
150
H410 ESD
Shelving unit
1040 x 510 x 2020
200
PH510 ESD
Extra shelf
1000 x 500
200
H510 ESD
Shelving unit
1040 x 610 x 2020
200
PH610 ESD
Extra shelf
1000 x 600
200
Extension unit
1020 x 410 x 2020
150
PH410L ESD
Dividing panel • 335 x 2015
VS4 ESD
Extension unit
1020 x 510 x 2020
200
PH510L ESD
Dividing panel • 435 x 2015
VS5 ESD
Extension unit
1020 x 610 x 2020
200
PH610L ESD
Dividing panel • 535 x 2015
VS6 ESD
H610 ESD
Side panel •
400 x 2015
PS4 ESD
Side panel •
500 x 2015
PS5 ESD
Side panel •
600 x 2015
PS6 ESD
Back panel •
1000 x 1920
TS10 ESD
• = non stock item
Ergonomic workspaces product catalogue 2014-2015
SHELVES AND CABINETS Small parts shelving
Small parts storage shelving
95
96
Ergonomic workspaces product catalogue 2014-2015
Industrial screens
Ergonomic workspaces product catalogue 2014-2015
97
Industrial screens work
INDUSTRIAL SCREENS
as noise insulators and space dividers
The compact and modern Treston Group industrial
office screen system with panel and accessory options
can be used almost anywhere; from production
facilities to offices. Noise from production areas or
loud voices from neighbouring workstations are often
disturbing factors. One way of reducing the noise level is
to divide workspaces from each other and/or separate
them from production areas. This can be easily done
with Treston Group screens. An individual workstation
aids concentration and improves accuracy. With Treston
Group screens noise levels can be reduced on average,
by 7-9 dB to the standard ISO 10053 (VTT Research
Centre Finland).
An anodized aluminium frame holds
panels made of blue or grey fabric
panelling or perforated panel
98
Ergonomic workspaces product catalogue 2014-2015
Divider screen panels can be used individually, in straight
lines, or at right angles to form enclosed spaces. Create
a uniform, stylish look with screens throughout your
company!
Industrial office screen system
Blue fabric
Grey fabric
Perf. panel
Suitability of legs (ordered separately, 1 pc per pack)
Code ESD
Panel size
Code
T-leg 400
Code
T-leg 600
Code
L-leg 250
Code
Corner leg set
P0712 FB
P0712 FB ESD
750 x 1245
TLEG400
-
LLEG250
CLEG
P0720 FB
P0720 FB ESD
750 x 2000
TLEG400* TLEG600
1050 x 1245 P1012 FB
P1012 FB ESD
1050 x 1245 TLEG400
Blue fabric
1050 x 2000 P1020 FB
P1020 FB ESD
1050 x 2000 TLEG400* TLEG600
Screen panel
Grey fabric
750 x 1245
P0712 FG P0712 FG ESD
Screen panel
Grey fabric
750 x 2000
P0720 FG P0720 FG ESD
Screen panel
Grey fabric
1050 x 1245 P1012 FG P1012 FG ESD
Screen panel
Grey fabric
1050 x 2000 P1020 FG P1020 FG ESD
Screen panel
Perf. panel* 750 x 1245
P0712 S
P0712 S
Screen panel
Perf. panel* 750 x 2000
P0720 S
P0720 S
Screen panel
Perf. panel* 1050 x 1245 P1012 S
P1012 S
Screen panel
Perf. panel* 1050 x 2000 P1020 S
P1020 S
Material
Size
L x H mm
Screen panel
Blue fabric
750 x 1245
Screen panel
Blue fabric
750 x 2000
Screen panel
Blue fabric
Screen panel
Code
Legs are ordered separately.
T-leg 600
L-leg 250
CLEG
LLEG250
CLEG
LLEG250*
CLEG
* We recommend this leg for the low panels but it can be mounted to
high fabric panels and all corner layouts.
•
TLEG 400 is suitable for all low panels, and high fabric panels. Complete
assembly’s height:
1275 -1315 mm (low panels)
2030 -2070 mm (high panels)
•
TLEG 600 is suitable for all high panels, fabric and steel. Adjustable
feet are provided for fine levelling. Complete assembly’s height: 2070 2080 mm.
•
CLEG- corner leg set for all panels. Can be used with two panels to
create a 90 deg corner.
•
LLEG 250 is suitable for all low panels, and high fabric panels. Complete
assembly’s height:
1275 -1315 mm (low panels)
2030 -2070 mm (high panels)
•
One screen panel will need a panel and two legs, which are ordered
separately.
•
Straight line assemblies require two legs for the first panel and one leg for
each additional panel.
* light grey RAL 7035, 9 mm perforations at 38 mm centres.
T-leg 400
-
LLEG250*
INDUSTRIAL SCREENS
Screen panels
Name
Corner leg set
Ergonomic workspaces product catalogue 2014-2015
99
No. 1 Combination includes
6 pcs acoustic panel P1012 FB, 1050 x 1245 mm
6 pcs leg TLEG 400
1 pcs corner leg GLEG
2 pcs workbench WB811, 800 x 1073 mm
1 pc corner worktop WB1212 CT, 1153 x 1153 mm
1 pc aluminiumprofile AL2X110
1 pc adjustable shelf ASH110, 400 x 960 mm
1 pc support bracket HSB110
1 pc lighting unit OL254
1 pc cable channel CJK100 SET
1 pc chair X40L R
1
No. 2 Combination includes
2 pcs acoustic panel P1012 FG, 1050 x 1245 mm
3 pcs leg TLEG 400
3 pcs bin rail PBP100 ESD
No. 3 Combination includes
4 pcs perforated steel panel P0720 S, 750 x 2000 mm
5 pcs leg TLEG 600
1 pc bin rail PBP100 ESD
No. 4 Combination includes
2
4 pcs acoustic panel P1012 FB, 1050 x 1245 mm
4 pcs leg TLEG 400
1 pc corner leg GLEG
2 pcs steel shelf PSS100 ESD
3
Bin rail PBP
Aluminium rail for stacking bins 1015, 1520, 1525 and 1930.
Load capacity 10 kg. Aluminium profile/semiconductive
epoxy powder coated steel. Max 3 profiles/one side.
Steel shelf PSS
Steel semiconductive epoxy powder coated shelf. The
shelf can sit on the brackets as normal or hang from the
brackets to provide end stops. Load capacity 10 kg.
Max. 3 shelves/one side.
4
Power channel PJK
May be fitted with a choice of components, ordered
separately. All meet with CE requirements. 3 m cable is
included. Supplied wired and ready for use.
Industrial screen accessories
Steel shelf PSS
INDUSTRIAL SCREENS
Bin rail PBP
Size mm
Code ESD
700
PBP70 ESD
Bin rail
1000
PBP100 ESD
Steel shelf
170 x 710
PSS70 ESD
Steel shelf
170 x 1010
PSS100 ESD
Power channel
640
PJK70
Power channel
940
PJK100
**COMPONENTS FOR POWER CHANNEL PJK
E1
E2
E3
E4
Power channel PJK
100
Name
Bin rail
Ergonomic workspaces product catalogue 2014-2015
Double socket
Switch
Automatic fuse 10 A
Automatic fuse/earth leakage
switch10 A/30 mA
E5 Emergency-stop-switch
E6 Data connector/shielded for
Cat.6 cable
E7 Data connector for Cat.5 cable
E8 Pneumatic, quick coupling 3/8” Cat 5
Perforated industrial screens
These industrial screens are modular, and they can be
equipped with all M750 accessories. Industrial screens
can be used as space dividers. They also provide noise
insulation; the combinations available have perforated
back panels on both sides and one side is insulated.
Industrial screens
Name
Size W x D x H mm
Code
Standard part, T-feet
780 x 60 x 1850
C 520 07 101
Extension part, T-foot
750 x 560 x 1850
C 520 07 102
Extension part, L-foot
750 x 310 x 1850
C 520 07 103
Extension part, I-foot
750 x 60 x 1850
C 520 07 104
Includes 6 perforated back panels, 3 pcs/side.
The standard part includes two feet.
The extension part includes one foot.
Extension part,
I-foot
Parts
Name
T-foot
Size W x D x H mm
1850
Code
836 516-35
L-foot
1850
836 532-35
I-foot
1850
836 597-35
Spacer bar
750
835 838-35
Corner joint pair
Standard part,
T-foot
Extension part,
T-foot
847 615-51
Perforated back panel M750 718 x 17 x 612
861 512-07/-35
Perforated back panel M750, 718 x 17 x 612
insulated*
Upper list
718 x 65
861 701-07/-35
851 907-07
The wall module requires two spacer bars.
!
The colour code is included in those product
codes that are formed with numbers.
It is either at the end, following the hyphen (e.g. 860 804-35), or
in the middle (e.g. C 334 07 000).
* The insulation material used is polyether foam.
All M750 accessories are suitable for the industrial screen.
Size W x D mm
Max load kg
Code
Steel shelf M750
740 x 300
50
836 028-35
Steel shelf M750
740 x 400
50
852 770-35
Bin rail M750
742 x 100
50
859 151-35
!
Steel shelf
More accessories starting from page 33
M750 accessories suit these industrial screens.
Bin rail M750 with brackets and stacking bins.
Ergonomic workspaces product catalogue 2014-2015
INDUSTRIAL SCREENS
Industrial screen accessories
Name
101
102
Ergonomic workspaces product catalogue 2014-2015
Perforated panels
Ergonomic workspaces product catalogue 2014-2015
103
Perforated panels are a part of
a good organisation
Perforated panels are efficient dividers of space and,
at the same time, practical storage facilities for tools
and equipment. An industrial screen can be used as
a sound-insulating space divider by equiping it with
back panel elements with fireproof insulation.
PERFORATED PANELS
Order and tidiness are appreciated
104
Order and tidiness cannot be achieved and maintained
without there being a place for each tool. Perforated
Ergonomic workspaces product catalogue 2014-2015
panels and hooks offer a practical and versatile solution
for storing tools and equipment. Perforated panel products
are available for direct fastening to the wall or for fastening
to upright profiles or tubes.
Hooks also for heavy loads
The hooks can withstand loads
of up to 20 kg.
Perforated panels
The perforated back panels are fastened either to the upright tubes (with Concept and TP benches) or accessory frame
AKK (with WB bench). The size of the perforation is 9 x 9 mm, center to center 38 mm.
1. Perforated panels for concept and TP benches
Name
Module
Size
W x H mm
Code ESD
Perforated back panel
M500
468 x 389
861 501-35
Perforated back panel
M750
718 x 194
861 510-35
Perforated back panel
M750
718 x 389
861 511-35
Perforated back panel
Perforated back panel,
insulated
M750
M750
718 x 612
718 x 612
861 512-35
861 701-35
Perforated back panel
M750
718 x 1003
861 514-35
Perforated back panel
M900
871 x 389
861 516-35
Perforated back panel •
M1350
1318 x 389
861 521-35
Perforated back panel •
M1500
1474 x 389
861 526-35
Perforated back panel •
M1800
1774 x 389
861 531-35
Fastened to the upright tubes (see pages 30 & 44).
2
1
3
2. Back panels for concept and TP benches
Name
Module
Size
W x H mm
Code ESD
Back panel •
M500
468 x 389
861 541-35
Back panel
M750
718 x 194
861 550-35
Back panel
M750
718 x 389
861 551-35
Back panel
M750
718 x 612
861 552-35
Back panel
M900
871 x 389
861 556-35
4
Fastened to the upright tubes (see pages 30 & 44).
3. Perforated panels for TPH benches
4. Perforated panels for WB benches
Size W x H mm
Suitable for
Code
Code ESD
1115 x 750
1415 x 750
1715 x 750
Panel hooks
TPH712
TPH715/ 915
TPH718/ 918
TPH
RL120
RL150
RL180
RK1
RL120
RL150
RL180
RK1
Size
W x H mm
Suitable for
Code ESD
668 x 500
AKK70, AKK150
ARL70
968 x 500
AKK180
ARL100
Mount on accessory frame AKK (see page 22).
PERFORATED PANELS
Mount on TPH benches with panel hooks RK1. Can also be attached to a
wall with screws (included).
Ergonomic workspaces product catalogue 2014-2015
105
Panel hooks
Our selection includes more than 50 different kinds of hooks
and brackets for the efficient storage and organisation of
tools. All the hooks and brackets can be easily attached to
our perforated panels.
Hook R1
R1
R2
Name
L
Ø
Max load kg
Code
Hook R1
30
3
10
853 207-51
Hook R1
50
4
10
853 208-51
Hook R1
50
6
10
853 241-51
Hook R1
80
6
10
853 209-51
Hook R1
100
4
8
853 210-51
Hook R1
100
6
10
853 211-51
Hook R1
150
4
4
853 212-51
Hook R1
150
6
10
853 213-51
Hook R1
200
4
2
853 214-51
Hook R1
200
6
6
853 215-51
Hook R1
300
6
3
853 216-51
Hook R1
300
8
8
853 217-51
L = hook length mm
All order numbers include 5 pcs.
Hook R2
R3
Name
L
Ø
A
Max load kg
Code
Hook R2
33
3
17
10
853 218-51
Hook R2
43
4
25
10
853 219-51
Hook R2
43
4
40
10
853 220-51
Hook R2
100
6
25
10
853 221-51
Hook R2
150
4
15
6
853 222-51
Hook R2
150
6
25
10
853 223-51
Hook R2
200
6
25
10
853 224-51
L = hook length mm
A = free gap mm
All order numbers include 5 pcs.
Hook R3
R10
Name
L
Ø
Max load kg
Code
Hook R3
10
6
10
853 225-51
Hook R3
50
6
10
853 226-51
Max load kg
Code
L = hook length mm
PERFORATED PANELS Panel hooks
All order numbers include 5 pcs.
Hook R10
Name
L
A
Hook R10
28
9
10
853 227-51
Hook R10
33
17
10
853 228-51
L = hook length mm
R13
A = free gap mm
All order numbers include 5 pcs.
Hook R13
Name
L
Ø
Max load kg
Code
Hook R13
157
3
1
853 229-51
L = hook length mm
The order number includes 5 pcs.
106
Ergonomic workspaces product catalogue 2014-2015
Hook R16
R16
R19
Name
L
Max load kg
Code
Hook R16
20
10
831 514-51
Hook R16
46
10
831 506-51
L = hook length mm
All order numbers include 1 pc.
Hook R19
R21
Name
Ø
Code
Hook R19
13
853 231-51
Hook R19
19
853 232-51
Hook R19
22
853 233-51
All order numbers include 5 pc.
Hook R21
Name
L
Ø
Code
Hook R21
220
12
831 646-51
L = hook length mm
R24
The order number includes 1 pc.
Hook R24
Name
L
Ø
Code
Hook R24
65
17
831 700-51
Hook R24
80
26
831 719-51
Hook R24
100
42
852 167-51
L = hook length mm
All order numbers include 1 pc.
R26
Hook R26
Name
L
Ø
Code
Hook R26
160
10
838 896-51
L = hook length mm
The order number includes 1 pc.
Hook R29
Name
L
Max load kg
Code
Hook R29
40
5
853 234-51
Hook R29
60
5
853 235-51
Hook R29
80
10
853 236-51
All order numbers include 5 pcs.
R29
Hook R30
Name
L
Ø
Max load kg
Code
Hook R30
35
4
10
853 237-51
Hook R30
85
6
10
853 238-51
L = hook length mm
All order numbers include 5 pcs.
R30
R33
Hook R33
Name
H
Ø
Code
Hook R33
30
90
832 162-51
PERFORATED PANELS Panel hooks
L = hook length mm
H = hook height mm
The order number includes 1 pc.
Ergonomic workspaces product catalogue 2014-2015
107
Hook R35
R35
R37
Name
L
A
Code
Hook R35
17
35
853 239-51
Hook R35
17
55
853 240-51
L = hook length mm
A = free gap mm
All order numbers include 5 pcs.
Hook R37
R41
Name
Ø
Max load kg
Code
Hook R37
40
10
831 433-51
Hook R37
60
10
831 441-51
Hook R37
80
10
831 603-51
All order numbers include 1 pc.
Hook R41
R42
Name
L
Code
Hook R41
556
838 357-51
L = hook length mm
The order number includes 1 pc.
Hook R42
R43
Name
L
Code
Hook R42
238
838 365-51
L = hook length mm
The order number includes 1 pc.
Hook R43
R46
Name
L
Code
Hook R43
238
838 373-51
L = hook length mm
The order number includes 1 pc.
Hook R46
Name
L
Hook R46
112
for stacking bins
1015 and 30-1L
831 794-51
Hook R46
634
bin rail for six
stacking bins
1015 and 30-1L
839 086-51
Code
R47
L = hook length mm
PERFORATED PANELS Panel hooks
All order numbers include 1 pc.
Hook R47
Name
WxD
Max load kg
Code
Hook R47
350 x 120
4
831 654-35
The order number includes 1 pc.
R48
Hook R48
Name
WxDxH
Code
Hook R48
240 x 70 x 465
838 380-51
The order number includes 1 pc.
Paper roll holder
Name
L
Code
Paper roll holder
300
854 043-35
L = max roll width mm
108
Ergonomic workspaces product catalogue 2014-2015
Other supplies
Name
Size
W x D x H mm
Max
load kg
Code
Box holder for four pick up boxes
456 x 165 x 48
5
854 042-35
Utility box
410 x 155 x 90
4
854 041-35
Folder compartment
466 x 90 x 240
4
854 040-35
Box holder
Utility box
Folder compartment
Hook sets
Ready-made hook sets help you to get started.
Choose the most suitable hook set for your needs from the following
possibilities:
Hook set 1
Hook set 2
Hook set 3
Hook set 4
Hook set 5
Basic light hook set
Basic hook set for hand tools
Hook set for perforated tool cabinet
All inclusive set for hand tools
Hook set for heavy tools in perforated tool cabinet
Hook sets
Hooks sets
Hooks
included in the sets
(Code)
L mm
Ø mm
R1 (853 207-51)
30
3
R1 (853 208-51)
50
4
R1 (853 211-51)
100
6
R2 (853 218-51)
33
3
17
R2 (853 219-51)
43
4
25
R2 (853 220-51)
43
4
40
5
R10 (853 227-51)
28
9
5
R10 (853 228-51)
33
17
A mm
Set 1
Set 2
Set 3
Set 4
Set 5
855 001-51
855 002-51
855 003-51
855 004-51
855 005-51
5
15
10
10
10
10
5
5
5
5
10
5
5
5
5
R19 (853 232-51)
19
R19 (853 233-51)
22
5
5
5
R21 (831 646-51)
220
12
1
R24 (831 719-51)
80
26
1
R24 (852 167-51)
100
42
R29 (853 235-51)
60
R30 (853 237-51)
35
4
R33 (832 162-51)
30
90
R35 (853 239-51)
17
35
R35 (853 240-51)
17
55
5
5
1
5
7
1
2
35
238
R43 (838 373-51)
42
238
3
3
5
5
35
40
10
1
1
2
1
5
5
5
1
3
3
1
1
100
107
5
60
R42 (838 365-51)
5
5
5
5
5
1
1
PERFORATED PANELS Panel hooks
13
Pieces
5
5
R19 (853 231-51)
R37 (831 441-51)
5
1
20
45
69
L = hook length mm
A = free gap mm
Ergonomic workspaces product catalogue 2014-2015
109
Drawer unit spare parts
Name
Compatibility
Code
Cover with rubber mat, ESD
45 drawer unit
872 242-35
Shelf for cabinet version
45 drawer unit
872 043-35
Bracket pair for the shelf
45 and 75 drawer units
872 045-51
Cover with rubber mat, ESD
75 drawer unit
872 243-35
Shelf for cabinet version
75 drawer unit
872 044-35
Castor set Ø 100 ESD
45 and 75 drawer units
852 774-00
Name
Compatibility
Code
Divider H=100, lateral
45/100 drawer
872 950-35
Divider H=100, lateral
75/100 drawer
872 952-35
Divider H=150, lateral
45/150 drawer
872 951-35
Divider H=150, lateral
75/150 and 200 drawers
872 953-35
Divider holder, side wall
45 and 75 drawers
872 960-35
Divider H=100, longitudinal
75/100 drawer
872 954-35
Divider H=150, longitudinal
75/150 drawer
872 955-35
Divider holder, rear wall
75 drawer
872 961-35
Name
Compatibility
Code
Rubber mat 550 x 420
Industrial cabinet 55/100
836 716-00
Rubber mat 799 x 420
Industrial cabinet 80/100
836 715-00
Compatibility
Code
Drawer interior spare parts
Spare parts for industrial cabinets
Castors
Name
Castor set Ø 100 ESD
45 and 75 drawer units
852 774-00
Castor set Ø 100
Worktop trolley, Storage trolley, Ergo trolley
852 768-00
Castor set Ø 100
Concept and TP benches
834 734-00
Castor set Ø 125
Basic trolley
834 740-00
Castor set Ø 100 ESD
Worktop trolley, Storage trolley, Ergo trolley
852 774-00
Castor set Ø 100 ESD
Multi trolley, Concept and TP benches
860 429-00
Castor set Ø 50
Transport skate
853 176-00
Castor set Ø 50 ESD
Transport skate ESD
853 175-00
Spare parts for chairs
Name
Height adjust mm
Arm rests X-series
140-220
Arm rests X-series ESD
140-220
Arm rests, task chair S
160-220
Arm rests ESD, task chair S
160-220
Gas lift
400-540/410-550/420-560
Gas lift
450-650
Gas lift
500-740
Gas lift
370-510
Gas lift, black
530-720
Gas lift, ESD, chrome
530-720
Foot ring, chrome
Foot ring, chrome
Black - swivelling twin castor for soft floors (brake unloaded), standard in X10 - X30
Black/grey - SOFT swivelling twin castor for hard floors (brake unloaded),
standard in X40
110
Dimension mm
Compatibility
Code
AR
Ø 440
Ø 50
Ø 50
X-series
X-series, ESD
Task chair S
Task chair S, ESD
X20 PU/X30/X40
X32
X35/X25 PU
X10
Task chair S
Task chair S, ESD
X35, X25PU
Task chair S
all chairs
all chairs
Code ESD
AR ESD
862 007-00
862 006-00
4046
4062
4047
4047
862 008-00
862 009-00
8766
831 190-50
4044
4061
Black - ESD swivelling twin castor for ESD floors (brake unloaded), standard in X10 Ø 50
- X40 ESD
Black/grey - ESD SOFT swivelling twin castor for ESD floors (brake unloaded),
Ø 50
TO ORDER
Black/grey - ESD SOFT swivelling twin castor for ESD floors (brake loaded),
Ø 50
TO ORDER
all chairs
4045
all chairs
9692
all chairs
9722
Crome swivelling twin castor for soft floor (brake loaded), TO ORDER
Floor glide, standard in X25 PU, X35
High ESD floor glide, TO ORDER
all chairs
Ergonomic workspaces product catalogue 2014-2015
Ø 50
Ø 14/50 mm, h: 39,5
Ø 36/50 mm, h: 59,5
X10, X20, X30
9723
4043
4060
4088
Discover our product ranges!
Distinctive Workshops
Our workshop drawer cabinets, tool panels and
workbenches are designed to withstand heavy
loads and strenuous use in workshops, repair
shops and industrial environments.
The long lifetime of our furniture guarantees
productivity and a satisfied user. Our workshop
furniture is also well known in teaching
environments.
Storage systems
Our plastic storage drawers are durable and easy
to clean, and can be customised into a complete
storage system if necessary. Our product range
also includes various stand and trolley solutions,
for the more efficient use of storage space and
easier movement of stored goods.
We also have storage furniture for EPAs. In addition,
some of our storage solutions are based on
reprocessed plastic.
Ergonomic Workspaces
Process changes in production or operations
require reconfigureable workstations that take
account of individual ergonomics requirements.
Our modular product solutions allow you to react
to new situations and the resulting needs in an agile
manner, enabling smooth, continuous operations.
For the needs of the electronics industry, we also
make ESD-shielded workstations.
Treston Medi
The Treston Medi furniture series has been
designed in close cooperation with healthcare
experts, resulting in user-friendly furniture for nursing
staff. Our furniture includes various treatment and
sampling trolleys for procedures, basket trolleys
for moving, transporting and storing objects and
implements, mobile workstations for mobile work
such as doctor’s rounds, equipment trolleys for
diagnostics equipment, workstations for equipment
maintenance rooms, and saddle and workchairs.
HEADQUARTERS
FACTORY - FINLAND
Treston Group
Sorakatu 1
20730 Turku
Tel. +358 10 4469 11
Fax +358 10 4469 789
[email protected]
www.trestongroup.com
Treston Group, Turku plant
Sorakatu 1
20730 Turku
Tel. +358 10 4469 11
Fax +358 10 4469 789
[email protected]
www.trestongroup.fi
FACTORY - GERMANY
Treston Group, Jyväskylä plant
PO Box 33
40351 Jyväskylä
Tel. +358 10 4469 11
Fax +358 10 4469 290
[email protected]
www.trestongroup.fi
Treston Deutschland GmbH
Profiltechnik
Sülkampweg 20
32278 Kirchlengern
Tel. +49 5223 18 02 70
Fax +49 5223 18 02 72
[email protected]
www.trestongroup.de
FRANCE
GERMANY
Sovella SARL
Z.A.C. de la Bonne Rencontre
1, voie Gallo Romaine,Quincy-Voisins
77334 Meaux Cedex
Tel. +33 1 64 17 11 11
Fax +33 1 64 17 11 10
[email protected]
www.trestongroup.fr
Treston Deutschland GmbH
Thomas-Mann-Str. 21
22175 Hamburg
Tel. +49 40 8816 5022 0
Fax +49 40 8816 5022 10
[email protected]
www.trestongroup.de
Treston Deutschland GmbH
Niederlassung Raunheim
Frankfurter Straße 101
65479 Raunheim
Tel. +49 6142 992 50
Fax +49 6142 218 75
[email protected]
www.trestongroup.de
UNITED KINGDOM
USA
BENELUX
Treston Group AB
Bultgatan 40
442 40 Kungälv
Tel. +46 31 23 33 05
Fax +46 31 23 33 65
[email protected]
www.trestongroup.se
Treston Ltd
Treston House
5b Bone Lane, Newbury
Berkshire, RG14 5SH
Tel. +44 1635 521521
Fax +44 1635 37452
[email protected]
www.trestongroup.co.uk
Sovella, Inc.
156 Bluffs Court
Canton, GA 30114
Tel. +1 770 424 0004
+1 800 437 6772
Fax +1 770 424 8066
[email protected]
www.sovella.us
Human Workspace b.v.
Mechelaarstraat 17
4903 RE Oosterhout
Tel. +31(0) 162 454 383
Fax. +31(0)162 434 712
[email protected]
www.humanworkspace.nl
SWEDEN
Treston Group AB
Tumstocksvägen 9 A
187 66 Täby
Tel. +46 8 511 791 60
Fax +46 8 511 797 60
[email protected]
www.trestongroup.se
RUSSIA
Treston Group Russia LLC
197375, Russia, Saint-Petersburg,
Marshala Novikova street 42
Tel. +7 812 677 76 20
www.trestongroup.com
HUMAN WORKSPACE
Treston Group has a long history in professional furniture
Thanks to our global sales network, you can receive local support
design and manufacture, and well over three decades of
and customer service anywhere in the world. We have ofces in
experience in ergonomic workspace development. Our
Europe and North America as well as an extensive network of
design and manufacturing facilities are located in Finland
selected dealers in more than 30 countries.
and Germany.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement