Citizen U040 Specification

Citizen U040 Specification
2
CONTENTS
1. Main Features
1. Main Features ................................................................................. 3
2. Component Parts and their Functions ............................................ 4
3. Switching Digital Functions (Modes) .............................................. 6
4. How to Call the Time or Calendar of Each City in the World .......... 7
5. How to Turn on the EL Light ........................................................... 9
6. Setting the Analog Time ................................................................ 10
7. Setting the Digital Time [TME] ....................................................... 11
8. Using the Calendar [CAL] .............................................................. 13
9. Using the Alarm [AL1/AL2] ............................................................ 16
10. Using the Chronograph [CHR] ....................................................... 18
11. Using the Timer [TMR] ................................................................... 20
12. Using the Zone Set Mode [SET] .................................................... 23
13. Low Battery Warning Function ....................................................... 25
14. All Reset Function ......................................................................... 26
15. Precautions .................................................................................... 27
16. Specifications ................................................................................ 33
This watch is a combination quarts watch equipped with world time functions
which can easily call and display through button operations the time and calendar of 30 cities in the world and UTC (Coordinated Universal Time).
In addition to the alarm, chronograph and timer, it is equipped with an EL light
function to allow you to see the display in the dark.
3
2. Component Parts and their Functions
Name of Parts/Modes
Time
Calendar
Press button once
A Button A
Press button for 2
seconds or longer
Alarm 1
Alarm 2
Chronograph
Timer
ON/OFF switching
ON/OFF switching
Start/Stop
Start/Stop
Alarm monitor
Alarm monitor
–
–
EL light illuminated
Zone Set
EL light iluminated
Press button once
Switching of city
Switching of city
Switching of city
Switching of city
Split/Reset
Restart/Reset
Switching of city
Press button for 2
seconds or longe
To correction
state
To correction
state
To correction
state
To correction
state
–
–
To correction
state
TMR
Minute, Second,
Set time (minute)
SET
Hour, Minutes,
On/OF, City name
B Button B
M Button M Press button once
1 Mode mark
2 Digital display
4
3 Time difference
display from UTC
4 Crown
5 Hour hand
6 Minute hand
7 Second hand
Switching of mode
TME
Hour, Minute,
Second, City Name
CAL
Month, Date,
City name or Day
Switching of mode
AL1
Hour, Minute,
On/OF, City name
Display the time difference of indicated cities from UTC
To be used to set analog time
Always indicates “hours”
Always indicates “minutes”
Always indicates “seconds”
AL2
Hour, Minute,
On/OF, City name
CHR
Hour, Minute, Second,
1/100 seconds
Display the time difference of indicated cities from UTC
To be used to set analog time
Always indicates “hours”
Always indicates “minutes”
Always indicates “seconds”
5
3. Switching Digital Functions (Modes)
4. How to Call the Time or Calendar of Each City in the World
This watch has the following functions (modes).
Every time the button M is pressed, the mode is changed sequentially. With the
mode mark, you can check the current mode.
You can easily call through button operations the time or calendar of a city set to
"On (display)" in the Zone Set mode.
Time difference
from UTC
Mode mark
M
Mode Mark
Mode (Function)
TME
CAL
AL1
AL2
CHR
TMR
SET
Time
Calendar
Alarm 1
Alarm 2
Chronograph
Timer
Zone Set
M
B
City name
* If no button operation is done for 2 minutes or longer in Alarm 1, Alarm 2
and Zone Set modes, the watch will automatically return to Time mode.
6
<Operation Method>
(1) Select the time mode or calendar mode
by pressing the button M.
A (2) Every time the button B is pressed, the
time or calendar of the next city is displayed in the order (in the direction to
increase time difference) shown in the
table on the following page.
Every time the button A is pressed with
the button B pressed, the time or calendar of the next city is displayed in the
reverse direction (direction to decrease
Time (calendar)
corresponding to a the time difference).
city name
7
Cities and Time Difference from UTC (Universal Time Coordinated) Displayed
by This Watch
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Watch
display
Name of
City
UTC
LON
PAR
ROM
CAI
IST
MOW
KWI
DXB
KHI
DEL
DAC
BKK
SIN
HKG
PEK
Universal Time
Coordinated
London
Paris
Rome
Cairo
Istanbul
Moscow
Kuwait
Dubai
Karachi
New Delhi
Dacca
Bangkok
Singapore
Hong Kong
Beijing
Time Summer
Difference time
±0
±0
+1
+1
+2
+2
+3
+3
+4
+5
+5.5
+6
+7
+8
+8
+8
–
○
○
○
○
○
○
×
×
×
×
×
×
×
×
×
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Watch
display
Name of
City
TYO
SYD
NOU
AKL
HNL
ANC
LAX
DEN
CHI
MEX
NYC
YUL
CCS
RIO
BUE
Tokyo
Sydney
Nouméa
Auckland
Honolulu
Anchorage
Los Angeles
Denver
Chicago
Mexico City
New York
Montreal
Caracas
Rio de Janeiro
Buenos Aires
Time Summer
Difference time
+9
+10
+11
+12
-10
-9
-8
-7
-6
-6
-5
-5
-4
-3
-3
×
○
×
○
×
○
○
○
○
×
○
○
×
○
×
* It is possible to change through the same operations the city display in the
Alarm 1 mode, Alarm 2 mode, and Zone Set mode.
* A city set to non-display (OFF) in the Zone Set mode is not displayed.
* Mark ○ in the table indicates a city (region) implementing summer time and
mark × a city (region) not implementing it.
* The time difference and summer time implementation in the table may change
depending on the circumstances of each country. (The table as of year 1999)
5. How to Turn on the EL Light
• If the button A is pressed in the Time, Calendar, or Zone Set mode, the EL
light turns on. While the button is pressed, the EL light is kept turned on.
• The EL light turns on at the time of split time or stop operation during chronograph measuring.
9
6. Setting the Analog Time
Second hand
Normal
position
7. Setting the Digital Time [TME]
(1) When the crown is pulled, the
second hand stops.
(2) Turn the crown and set the
hands to the correct time.
(3) After the time is adjusted, push
the crown neatly to its normal
position. When the crown is
pushed in, the second hand
starts.
If the time of any of 30 cities and UTC is adjusted, the time of other cities is
automatically calculated and corrected on the basis of time difference.
[Normal Time Display]
Time difference
from UTC
M
Crown
Time adjustment position
B
* Stop the second hand at the 0 position and then press the crown when the
digital display reaches zero seconds. The second hand will start moving in
synchronization with the digital display.
10
City name
(1) Press button M to set the Time mode
[TME].
(2) Press the button B to show a city whose
time is to be corrected.
A (3) If the button B is pressed continuously
for about 2 seconds, "SMT (abbreviation
of summer time)" and "On" or "OF" blink
and watch enter the correction state. The
blinking figures can be corrected.
(4) Press the button A and switch summer
time setting (On) or non-setting (OF) of
the city.
Time (5) Every time the button B is pressed, the
blinking figures change in the sequence
of [second → minute → hour → 12 hours/
11
24 hours]. Have a desired figures blink.
(6) Press the button A to correct the blinking figures.
• If the button A is pressed in the state of second correction, the second is
corrected to 00. (When the second is 30 to 59, the minute is carried 1
minute.)
• Every time the button A is pressed in the state of hour or minute correction, the display advances one by one, and press and hold button A for
rapid advancement.
• 12/24 hour system switching is done every time the button A is pressed.
(7) Press the button M to return to the normal display.
* If the summer time is set (On), the time is advanced 1 hour from the current
time, and "SMT" is shown in the digital display. No summer time is available
for UTC.
* Make sure that the AM/PM indication is correct when setting the time in the
12-hour display system.
* Auto-Return to the normal Time display will be activated when the watch is
left in the correction state (blinking display) for about 2 minutes.
* If the button M is pressed in the Time correction state, a quick return is
made to the normal Time display.
12
8. Using the Calendar [CAL]
Every time the button A is pressed for 2 seconds or longer in the calendar mode,
city name display and day of week display are changed.
[Normal Calendar Display]
<City name display>
Time difference from UTC
M
B
City name
<Day of week display>
A
A
Press the button A
for 2 seconds or
longer
Month, Date
Day
13
<Setting the Calendar>
If the calendar of any of 30 cities and UTC is set, the calendar of other cities is
automatically calculated and corrected on the basis of the time difference.
(1) Press the button M to set the calendar mode (city name display).
(2) Press the button B and show a city whose calendar is to be corrected.
(3) If the button B is pressed continuously for about 2 seconds, "Month" blinks
and watch enter the correction state. The blinking figures can be corrected.
(4) Every time the button B is pressed in the correction state, the blinking figures change in the sequence of [Month → Date → Year]. Have a desired
figure blink.
(5) Press the button A to correct the blinking figures. (Press and hold button A
for rapid advancement)
(6) Press the button M to return to the normal display.
14
* Auto-Return to normal Calendar display will be activated when the watch is
left in Calendar correction state for about 2 minutes.
* If the button M is pressed in the Calendar correction state, a quick return is
made to the normal Calendar display.
* Calendar can be set from 2001 through 2099 (displayed only at the time of
correction).
* Day of the week is automatically set with adjustment of Year, Month and
Date.
* The calendar is a full auto calendar. Once it is set, no month-end correction
including the leap year is required.
* If the calendar is set to a non-existing day, it is automatically corrected to
the first day of the following month when the normal display is restored.
(Example : February 30 → March 1)
15
9. Using the Alarm [AL1/AL2]
Alarm 1 and Alarm 2 are different in sound only, and operating methods etc. are
all same. Once the alarm is set (On), the alarm sounds for about 15 seconds at
the set time every day. The alarm is stopped by pressing any of the buttons.
[Normal Alarm Display "ON"]
Alarm time
M
Time difference
from UTC
A
B
City name
16
On or
OF (OFF)
<How to Set Alarm>
(1) Press the button M to set Alarm
1 or Alarm 2 mode.
(2) Press the button B to show a city
whose alarm is to be set.
(3) If the button B is pressed continuously for about 2 seconds, the
alarm is turned On and "Hour"
blinks.
(4) Press the button A to correct the
"Hour." (Press and hold button A
for rapid advancement.)
(5) Press the button B to blink the
"Minute".
(6) Press the button A to correct the "Minute."
(7) Press the button M to return to the normal display.
* If the watch is set to 12-hour display of Time mode, Alarm will also be set
to 12-hour display.
* Auto-Return to normal Alarm display will be activated when the watch is
left in Alarm correction state for about 2 minutes.
* If the button M is pressed in the Alarm correction state, a quick return is
made to the normal Alarm display.
<To Switch Alarm On/OFF>
When button A is pressed in normal Alarm display, "On" and "OF (OFF)" are
changed each time the button is pressed. When Alarm is set to "On", "A1" or
"A2" turns on in the digital display.
<Alarm Monitor>
Press and hold button A in Alarm mode to make the Alarm monitor sound.
17
10. Using the Chronograph [CHR]
This chronograph allows you to measure and display to maximum "23 hours 59
minutes 59 seconds 99" in units of 1/100 of a second. After the completion of 24hour measurement, it returns to the reset display and stops. It is also possible to
measure split time (elapsing time).
<Split Time Measurement>
Every time the button B is pressed during chronograph measuring, the newest
split time is displayed for about 10 seconds. (During the split display, "SPL" blinks
in the mode mark display portion.)
[Chronograph Reset Display]
Time difference from UTC
A
M
A
Chronograph
Measuring
B
A
Stop
A
B
*1
A
Split Time
B
18
Hour, minute, second,
1/100 seconds
<Elapsed Time Measurement>
(1) Press the button M to set the chronograph mode.
(2) When the button A is pressed, it starts, and if the button A is pressed while
measuring, it stops. Each time you press button A, start/stop is repeated.
(3) If the button B is pressed while stopped, it returns to the reset display.
* The mode can be changed by pressing the button M even during the chronograph measuring. If the mode is returned to the chronograph mode again,
the continued measuring can be displayed. If the measuring exceeds 24
hours, however, return is made to the reset display.
B
*1: Auto-Return after 10 seconds.
19
11. Using the Timer [TMR]
Timer can be set in units of 1 minute up to 60 minutes.
When the timer measuring is completed, the time-up sounds for about 5 seconds.
[Timer Setting Display]
<To Set Timer Measurement>
(1) Press the button M to set the timer mode.
(2) If the button A is pressed, the timer starts from the set time.
(3) If the button A is pressed during measuring, it stops, and if the button A is
pressed again, it restarts.
(4) If the button B is pressed during stoppage, it returns to the set time.
Time difference from UTC
M
Auto-return to the set time
A
B
Set time (minutes)
20
Remaining time
(Minute, second)
<To Set Timer>
(1) Press the button M to set the
timer mode.
(2) Ever y time the button B is
pressed, the set time is corrected
-1 minute.
(Press and hold button B for rapid
advancement.)
B *1
Set Time
Measuring
A
Time up
A
A
B
Stop
*1 : Timer restart function
If the button B is pressed
during timer measuring, it
quickly returns to the set
time and restarts.
21
* The mode can be changed by pressing the button M even during timer
measuring. If it is returned to the timer mode again, the continued measuring can be displayed. If the measuring of the set time is completed, however, it returns to the set time display.
12.Using the Zone Set Mode [SET]
As to the 30 cities and UTC (Coordinated Universal Time) to be displayed by this
watch, display setting or non-display setting can be done for each city, and the
summer time of each city except UTC can be set. Only the cities having the city
display set (On) can be displayed in Timer, Calendar and Alarm modes.
[Normal Zone Set Display]
Time
M
Time difference
from UTC
A
B
22
City name (blinking)
On or
OF (OFF)
<To Set the Zone Set Mode>
(1) Press the button M to set the Zone
Set mode.
(2) Press the button B and show a city
to be set.
(3) If the button B is pressed continuously for about 2 seconds or longer,
"On" or "OF" blinks.
(4) Press the button A to select display (On) or non-display (OF) of the
city.
(5) If the button B is pressed, "SMT
(abbreviation of summer time)" and
"On" or "OF" blink.
23
(6) Press the button A to select the summer time setting (On) or cancel (OF).
In order to set for another city, watch enter the correction state for the next
city by pressing the button B again. Through the same operations sequentially, display or non-display of cities should be selected and the summer time
setting should be done. (The city names can be advanced rapidly by continuously pressing the button B.)
(7) After the setting for the cities is completed, press the button M to return to
the normal display.
* If the display is set to "OF" for all the cities, the city name to be displayed
in each mode is only UTC.
* Auto-Return to normal Zone Set display will be activated when the watch
is left in Zone Set correction state for about 2 minutes.
* If the button M is pressed in the Zone Set correction state, a quick return
is made to the normal Zone Set display.
24
13. Low Battery Warning Function
When the battery approaches its life, the
movement of second hand is changed to 2second interval movement (2-graduation
movement every 2 seconds).
Although the time is correctly displayed, the
function will be limited as follows.
• EL light does not turn on.
• No sounding of alarm, time-up etc.
In such a case, you are advised to replace
the battery as soon as possible.
2 seconds
2 seconds
25
14. All Reset Function
15. Precautions
After the battery is replaced, be sure to do the following all-reset operation.
If a strong impact or static electricity is applied to the watch, the watch may make
abnormal display or malfunction (no display, continuous alarm sounding etc.),
though in a rare case. In such a case, do the following all-reset operation.
M
A
B
Crown
26
(1) Pull the crown out.
(2) Press buttons A, B and M simultaneously. (All displays turn on.)
(3) If the crown is pushed in to its normal position, confirming sound is
heard.
This has completed the all-reset operation.
After the all-resetting, correctly set the
time and modes before using.
CAUTION Water-Resistance Performance
There are several types of water-resistant watches, as shown in the following
table. For correct use within the design limits of the watch, confirm the level of
water-resistance of your watch, as indicated on the dial and case, and consult
the table.
• Water-resistance for daily use (to 3 atmospheres): This type of watch is waterresistant to minor exposure to water. For example, you may wear the watch
while washing your face; however, it is not designed for use underwater.
• Upgraded water-resistance for daily use (to 5 atmospheres): This type of watch
is water-resistant to moderate exposure to water. You may wear the watch while
swimming; however, it is not designed for use while skin diving.
• Upgraded water-resistance for daily use (to 10/20 atmospheres): This type of
watch may be used for skin diving; however, it is not designed for scuba or
saturated diving using helium gas.
27
Examples of Use
(The unit “bar” is roughly equal to 1 atmosphere.)
Indication
Minor exposure to water
(washing face, rain, etc.)
Moderate exposure to Marine sports (skin
water (washing, kitchen diving)
work, swimming, etc.)
Scuba diving (with air Operation of the
tank)
crown or button with
moisture visible
Dial
Case (caseback)
WATER RESIST
or no indication
WATER
RESIST(ANT)
Waterresistant to 3
atmospheres
OK
NO
NO
NO
NO
WR 50 or
WATER RESIST 50
WATER RESIST(ANT)
5 bar or
WATER RESIST (ANT)
Waterresistant to 5
atmospheres
OK
OK
NO
NO
NO
WATER RESIST(ANT) Water-resistant
10/20 bar or
to 10/20
WATER RESIST (ANT) atmospheres
OK
OK
OK
NO
NO
WR 100/200 or
WATER RESIST
100/200
28
Specification
* WATER RESIST(ANT) xx bar may also be indicated as W.R. xx bar.
29
CAUTION
• Be sure to use the watch with the crown pressed in (normal position). If your
watch has a screw-type crown, be sure to tighten the crown completely.
• Do NOT operate the crown or button with wet fingers or when the watch is wet.
Water may enter the watch and compromise water-resistance.
• If the watch is used in seawater, rinse with fresh water afterward and wipe with
a dry cloth.
• If moisture has entered the watch, or if the inside of the crystal is fogged up
and does not become clear within a day, immediately take the watch to your
dealer or Citizen Service Center for repair. Leaving the watch in such a state
will allow corrosion to form inside.
• If seawater enters the watch, place the watch in a box or plastic bag and immediately take it in for repair. Otherwise, pressure inside the watch will increase,
and parts (crystal, crown, buttons, etc.) may come off.
CAUTION
Keep Your Watch Clean
• Leaving dust and dirt deposited between the case and crown may result in
difficulty in pulling the crown out. Rotate the crown while in its normal position,
from time to time, to loosen dust and dirt and then brush it off.
• Dust and dirt tend to be deposited in gaps in the back of the case or band.
Deposited dust and dirt may cause corrosion and soil your clothing. Clean the
watch occasionally.
30
Cleaning the Watch
• Use a soft cloth to wipe off dirt, perspiration and water from the case and
crystal.
• Use a soft, dry cloth to wipe off perspiration and dirt from the leather band.
• To clean a metal, plastic, or rubber watchband, wash away dirt with mild soap
and water. Use a soft brush to remove dust and dirt jammed in the gaps in the
metal band. If your watch is not water-resistant, take it to your dealer.
NOTE: Avoid using solvents (thinner, benzine, etc.), as they may mar the finish.
WARNING Handling of the Battery
• Keep the battery out of the reach of small children. If a child swallows the
battery, contact a physician immediately.
CAUTION Replacing the Battery
• For replacement of the battery, take your watch to your dealer or Citizen Service Center.
• Replace the battery as soon as possible if the service life of the battery has
expired. Leaving a depleted battery in the watch may result in leakage, which
can damage the watch severely.
CAUTION Operating Environment
• Use the watch within the operating-temperature range specified in the instruction manual.
31
•
•
•
•
•
•
32
Using the watch where temperatures are outside the specified range, may result in deterioration of functions or even stoppage of the watch.
Do NOT use the watch in places where it is exposed to high temperature, such
as in a sauna.
Doing so may result in a skin burn.
Do NOT leave the watch in a place where it is exposed to high temperature,
such as the glove compartment or dash-board of a car.
Doing so may result in deterioration of the watch, such as deformation of plastic parts.
Do NOT place the watch close to a magnet.
Timekeeping will become inaccurate if you place the watch close to magnetic
health equipment such as a magnetic necklace or a magnetic latch of a refrigerator door or handbag clasp or the earphone of a mobile phone. If this has
occurred, move the watch away from the magnet and reset the time.
Do NOT place the watch close to household appliances that generate static
electricity.
Timekeeping may become inaccurate if the watch is exposed to strong static
electricity, such as is emitted from a TV screen.
Do NOT subject the watch to a strong shock such as dropping it onto a hard floor.
Avoid using the watch in an environment where it may be exposed to chemicals or corrosive gases.
If solvents, such as thinner and benzine, or substances containing such solvents come in contact with the watch, discoloration, melting, cracking, etc. may
result. If the watch comes in contact with mercury used in thermometers, the
case, band or other parts may become discolored.
16. Specifications
1. Caliber No.:
2. Type:
3. Accuracy:
U040
Combination quartz watch
Within ±20 seconds/month
(Within a normal temperature range of +5˚C to +35˚C (41˚F to
95˚F when worn.)
4. Operating Temperature Range : 0˚C to +55˚C (32˚F to 131˚F)
5. Display Functions
Analog:
• Hours, Minutes, Seconds (3 hands)
Digital:
• Time:
Hours, Minutes, Seconds, City name, Time difference from UTC
• Calendar:
Month, Date, Day, City name, Year (only at the time
of adjustment), Time difference from UTC
• Alarm:
Hours, Minutes, On or OF (OFF), City name, Time
difference from UTC
• Chronograph: Hours, Minutes, Seconds, 1/100 seconds, Time difference from UTC, Split Time (24-hour measurement)
33
• Timer:
Minutes, Seconds, Setting time (60-minute measurement), Time difference from UTC
• Zone Set:
Display of city names/non-display setting, summer
time setting
6. Additional Functions: • World time (Time and Calendar display of UTC and
30 cities in the world)
• EL Light Function
• Low Battery Warning Function
7. Battery:
Battery No.: 280-207, Battery Code: CR2012
8. Battery Life
Approx. 2 years. (Based on assumed use of Alarm 1
sound: 15 seconds/day, Alarm 2 sound: 15 seconds/2
days, Timer time-up sound: 5 seconds/day, EL Light: 3
seconds/day and Chronograph: 24-hour/week)
• These specifications are subject to change, for product improvement, without
prior notice.
34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement