FDUA/M Series Inverter Ducted Air Conditioners MHIAA is proudly sponsoring Monika’s Doggie Rescue 2 FD Series. Inverter Ducted Air Conditioners. A Mitsubishi Heavy Industries ducted system lets you and your family enjoy the comfort of powerful air conditioning in every part of your home all year round. Quiet, efficient and reliable our ducted systems have a 5 year warranty so you can be sure you’ll get quality air conditioning for years to come. FDUA.FDUM series Inverter Ducted Air Conditioners 2013 FDUA Indoor Unit. Duct Connected - High Static Pressure. Products Automatic external static pressure (E.S.P.) control By using a DC motor, the optimum air flow volume can be achieved by this automatic control. The indoor unit will recognize external static pressure automatically and keep rated air flow volume. New FDUA Duct Duct Longer Duct Ceiling Keep the same air flow volume Setting No. 1 E.S.P. (Pa) 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 200 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 E.S.P. button External static pressure can be set by E.S.P. button. Improved servicing Fan unit (impeller and motor) can be pulled out from the right side of the unit. Maintenance is available from the right side or from beneath. Pipe Unit Fan unit Maintenance hole Service space 3 FDUA Indoor Unit. Duct Connected - High Static Pressure. Wired Remote Control RC-EX1A Wireless Remote Control RC-E5 RCH-E3 RCN-KIT3-E Wired Remote Control W FduA71~160VF RC-EX1A RC-E5 RCH-E3 Dimension H 398 H 280 (1) Indoor units Model FDUA71VF 65 39 Drain can be discharged upwards by 600mm from the ceiling surface. It allows a piping layout with a high degree of freedom depending on the installation location. FDUA71VF Unit:mm 740 Duct dimension Symbol A Gas piping B Liquid piping C1 Drain piping Drain piping C2 Gravity drainage D Hole for wiring E Suspension bolts F Inspection hole 185 41 600mm Drain Pump 200 Duct dimension FDUA100/125/140/160VF Return air duct Drain hose piece Accessory Content 15.88 5 8" Flare 9.52 3 8" Flare VP25 I.D.25,O.D.32 VP20 I.D.20,O.D.26 M10 450X450 Installed on site 100 1300 Inspection hole 55 880 Duct dimension 55 C2 30 635 510 471 413 175 280 250 105 Max. drain lift 76 D 600 or less 295 325 15 Suspension bolts pitch 43 Air supply duct 620 Note 1 The model name label is attached on the lid of the control box. B A 135 E Under 60 FDUA.FDUM series Inverter Ducted Air Conditioners 2013 C1 69 58 67 Duct dimension less than 600mm 472 Control box 600 Flexible hose From bottom of unit or more Case 2 18 284 82 or more 18 28 Hanger plate for suspension bolt 986 Suspension bolts pitch 950 170 4 467 30 FDUA FDUA100VNVF FDUA100VNXVF FDUA125VNXVF FDUA140VNXVF FDUA160VSVF FDUA71VF FDUA100VF FDUA100VF FDUA125VF FDUA140VF FDUA160VF Outdoor FDC71VNX FDC100VN FDC100VNX FDC125VNX FDC140VNX Power supply Outdoor Unit Cooling T1 Capacity Heating H1 Input FDC160VS 1 Phase 230V 50Hz kW 3 Phase 415V 58Hz 7.1 (3.2-8.0) 10 (4.0-11.2) 10 (4.0-11.2) 12.5 (5.0-14.0) 14.0 (5.0-14.5) 16.0 (7.0-20.0) 8.0 (3.6-9.0) 11.2 (4.0-12.5) 11.2 (4.0-12.5) 14.0 (4.0-17.0) 16.0 (4.0-18.0) 18.0 (7.6-22.4) Heating H2 5.9 10.0 13.5 14.0 15.0 15.0 Cooling T1 2.22 3.05 2.85 3.83 4.44 5.02 kW Heating H1 2.22 2.87 2.74 3.68 4.41 4.96 3.20 3.28 3.51 3.26 3.15 3.19 EER Cooling T1 COP Heating H1 3.60 3.90 4.09 3.80 3.63 3.63 Indoor P-Hi:38 Hi:33 Me:29 Lo:25 P-Hi:43 Hi:42 Me:40 Lo:37 P-Hi:43 Hi:42 Me:40 Lo:37 P-Hi:45 Hi:43 Me:41 Lo:37 P-Hi:47 Hi:40 Me:43 Lo:40 P-Hi:49 Hi:48 Me:45 Lo:42 51 49 48 48 49 57 Sound pressure level (JIS C9612) dB(A) Outdoor Sound power level (JIS C9612) Airflow Outdoor dB(A) 66 70 70 70 72 74 Indoor l/s P-Hi: 400 Hi: 317 Me: 250 Lo: 167 P-Hi:650 Hi:600 Me:550 Lo:483 P-Hi:650 Hi:600 Me:550 Lo:483 P-Hi:717 Hi:650 Me:600 Lo:500 P-Hi:850 Hi:800 Me:700 Lo:600 P-Hi:850 Hi:800 Me:700 Lo:600 280 x 950 x 635 398 x 1150 x 650 398 x 1150 x 650 398 x 1150 x 650 398 x 1150 x 650 398 x 1150 x 650 750 x 880(+88) x 340 845 x 970 x 370 1300 x 970 x 370 1300 x 970 x 370 1300 x 970 x 370 1505 x 970 x 370 External Static Pressure Pa Indoor External dimensions (HXWXD) mm Outdoor Indoor Net weight Liquid line Refrigerant piping 200 kg Outdoor mm Gas line 34 52 52 52 52 52 60 81 105 105 105 140 Ø9.52 Ø9.52 Ø9.52 Ø9.52 Ø9.52 Ø12.7 Ø15.88 Ø15.88 Ø15.88 Ø15.88 Ø15.88 Ø22.22 Connection method Refrigerant R410A Flare Connection kg 2.95 3.8 4.5 4.5 4.5 7.2 Pre charged to pipe length m 30 30 30 30 30 30 50 100 100 100 70 Maxium Pipe Length m 50 mm 170 x 880 Return Air Connection mm 200 x 740 348 x 898 348 x 898 Controller RC-E5, RC-EX1 or RCN-KIT3-E UA-SP1-E (Optional) UA-SP2-E (Optional) 898 Duct dimension 181 VP25 I.D.25,O.D.32 M10 450X450 12.7 1 2" 22.22 7 8" 100 B A 40 G Under 60 or less 15 215 295 325 111 898 Duct dimension 182 181 192 C2 650 Notes 1) The model name label is attached on the lid of the control box. (2) Connect the piping with local pipe by using the pipe of the attachment. Liquid side and Gas side 61 74 Air supply duct 600 472 Inspection hole C1 69 E Flare Brazing From bottom of unit or more 17.5 284 86 150 506 Case 2 VP25 I.D.25,O.D.32 1500 1150 C2 111 Drain piping Drain piping Gravity drainage Hole for wiring Suspension bolts Inspection hole Connecting position of the local pipe. liquid side Connecting position of the local pipe. gas side Control box 24 Duct dimension 40 Flare or more 100 1500 Max. drain lift or less 600 215 398 370 248 172 15 D 650 531 498 458 348 150 40 295 325 Suspension bolts pitch Hanger plate for suspension bolt 61 74 Air supply duct 17.5 600 650 B A E 24 Inspection hole C1 69 Under 60 Duct dimension Suspension bolts pitch 472 Control box Drain hose piece Accessory 28 From bottom of unit or more Case 2 17.5 284 82 Flare 9.52 3 8" 26 Return air duct 1185 or more 1150 28 17.5 15.88 5 8" Connecting position of the attached connecting pipe liquid side D E F G H Installed on site Suspension bolts pitch Suspension bolts pitch Connecting position of the attached connecting pipe gas side B C2 Installed on site 1185 A C1 VP25 I.D.25,O.D.32 M10 450X450 Content Max. drain lift Drain hose piece Accessory 15.88 5 8" Flare 9.52 3 8" Flare VP25 I.D.25,O.D.32 Symbol 181 H D 650 531 498 458 40 398 370 248 172 24 Return air duct Content Duct dimension Symbol A Gas piping B Liquid piping C1 Drain piping Drain piping C2 Gravity drainage D Hole for wiring E Suspension bolts F Inspection hole 898 Duct dimension 348 181 Unit:mm Model FDUA160VF 111 24 898 Duct dimension 26 111 Unit:mm 348 Duct dimension Models FDUA100VF, 125VF, 140VF 600 Safety Pan 348 Brazed Quantity Supply Air Connection Hanger plate for suspension bolt Products FDUA71VNXVF Indoor 506 Note 1 The model name label is attached on the lid of the control box. Outline drawing (Unit:mm) 5 Model FDUM50VF Models FDUM60,71VF 6 With flexible set up options, you can tailor a Mitsubishi Heavy Industries ducted system to suit the needs of your family and home. Talk to one of our dealers today to discuss how to design a ducted system that’s right for you. FDUA.FDUM series Inverter Ducted Air Conditioners 2013 FDUM Indoor Unit. Duct Connected - Medium Static Pressure. Products Automatic external static pressure (E.S.P.) control By using a DC motor, the optimum air flow volume can be achieved by this automatic control. The indoor unit will recognize external static pressure automatically and keep rated air flow volume. New FDUM Duct Duct Longer Duct Ceiling Keep the same air flow volume E.S.P. button Setting No. No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 E.S.P. 10Pa 20Pa 30Pa 40Pa 50Pa 60Pa 70Pa 80Pa 90Pa 100Pa No.10 External static pressure can be set by E.S.P. button. Improved servicing Fan unit (impeller and motor) can be pulled out from the right side of the unit. Maintenance is available from the right side or from beneath. Pipe Fan unit Unit Maintenance hole Service space Reduced noise level dB(A) Air flow sound has been reduced by a new fan and casing design. Refrigerant flow sound was been decreased by advanced refrigerant distributor design. FDUM50VF FDUM60VF FDUM71VF FDUM100VF FDUM125VF FDUM140VF 5.0kW 6.0kW 7.1kW 10.0kW 12.5kW 14.0kW NEW FDUM 26 25 25 30 30 30 Current FDUM 28 28 29 32 33 33 Improvement -2 -3 -4 -2 -3 -3 Indoor model name Nominal cooling capacity 7 FDUM Indoor Unit. 8 Duct Connected - Medium Static Pressure. Wired Remote Control RC-EX1A Wireless Remote Control RC-E5 RCH-E3 RCN-KIT3-E Wired Remote Control RC-EX1A RC-E5 Thin design Drain can be discharged upwards by 600mm from the ceiling surface. It allows a piping layout with a high degree of freedom depending on the installation location. The height of all FDUM models is only 280mm. 70mm less less than 600mm 19mm less H 350 H 299 H 280 H 280 FDUM100/125/140VF FduM60VF Model FDUM60VF 55 C2 76 Suspension bolts pitch 18 284 81 Control box 635 510 471 413 30 M FDUA.FDUM series Inverter Ducted Air Conditioners 2013 4 4 Holes for tapping screws 139 58 67 E Air supply duct Hole 295 325 D 55 467 262 170 880 Duct dimension 55 F G View M 30 Max. drain lift 30 152 124 or less 90 2" Flare 6.35 1 4" Flare VP20 standard:I.D.20, O.D.26 or VP25 Used with attached socket:I.D.25, O.D.34 Note 2 Drain piping VP20 standard:I.D.20, O.D.26 or VP25 C2 Gravity drainage Used with attached socket:I.D.25, O.D.34 D Hole for wiring E M10 Suspension bolts Outside air opening F 150 Knock out for ducting Air outlet opening 125 Knock out G for ducting H 450X450 Inspection hole Notes 1 The model name label is attached on the lid of the control box. 2 Prepare the connecting socket VP20 or VP25 on site. B A 76 G C1 69 G 600 472 F 135 139 F 170 Drain piping 113 4 4 Holes for tapping screws 15 262 C1 4 4 Holes for tapping screws 28 950 Liquid piping 105 31 170 31 986 18 Hanger plate for suspension bolt Content 12.7 1 B 90 635 510 471 413 170 30 175 Duct dimension 41 200 39 Return air duct 14 4 Holes for tapping screw 50 15 D 680 Duct dimension 152 Hole 295 325 Drain hose piece Accessory Installed on site 450X450 View M 50 43 Air supply duct Symbol A Gas piping 65 46 200 125 Knock out 170 Max. drain lift E 150 Knock out Suspension bolts pitch 135 B A 600 or less 472 69 4 4 Holes for tapping screws 124 C1 860 Duct dimension 4 200=800 M10 Notes 1 The model name label is attached on the lid of the control box. 2 Prepare the connecting socket VP20 or VP25 on site. 18 284 81 28 750 58 67 170 Hole for wiring Suspension bolts Outside air opening for ducting Air outlet opening for ducting Inspection hole H Suspension bolts pitch G Duct dimension Suspension bolts pitch D E F Control box 55 Drain piping Gravity drainage G F M C2 105 786 18 Drain piping 65 46 43 Return air duct 12 4 Holes for tapping screw C1 12.7 1 2" Flare 6.35 1 4" Flare VP20 standard:I.D.20, O.D.26 or VP25 Used with attached socket:I.D.25, O.D.34 Note 2 VP20 standard:I.D.20, O.D.26 or VP25 Used with attached socket:I.D.25, O.D.34 280 250 175 39 31 Installed on site Gas piping Liquid piping Duct dimension 170 Drain hose piece Accessory Content A B 170 65 46 113 660 Duct dimension 200 200 200 31 41 200 Duct dimension Symbol Hanger plate for suspension bolt FDUM50/60/71VF 280 250 FduM50VF Model FDUM50VF 65 46 RCH-E3 600mm Drain Pump Flexible hose W C2 467 Outline drawing (Unit:mm) Model FDUM50VF FDUM FDUM50ZJXVF Outdoor Power supply FDUM71VNXVF FDUM100VNVF FDUM125VNXVF FDUM140VNXVF FDUM50VF FDUM60VF FDUM71VF FDUM100VF FDUM125VF FDUM140VF SRC50ZJX-S SRC60ZJX-S FDC71VNX FDC100VN FDC125VNX FDC140VNX 5.0 (2.2-5.6) 5.6 (2.8-6.3) 7.1 (3.2-8.0) 10.0 (4.0-11.2) 12.5 (5.0-14.0) 14.0 (5.0-14.5) 5.4 (0.6-6.3) 6.7 (0.6-7.1) 8.0 (3.6-9.0) 11.2 (4.0-12.5) 14.0 (4.0-17.0) 16.0 (4.0-18.0) Outdoor Unit 1 Phase 230V 50Hz Cooling T1 Capacity Heating H1 Input kW Heating H2 4.3 4.9 7.0 11.4 13.7 14.3 Cooling T1 1.56 1.75 2.20 2.92 3.60 4.40 1.70 2.00 2.20 3.20 3.90 4.54 3.18 kW Heating H1 EER Cooling T1 3.21 3.20 3.23 3.42 3.47 COP Heating H1 3.18 3.35 3.64 3.50 3.59 3.52 Indoor P-Hi:37 Hi:32 Me:29 Lo:26 P-Hi:36 Hi:31 Me:28 Lo:25 P-Hi:38 Hi:33 Me:29 Lo:25 P-Hi:44 Hi:38 Me:36 Lo:30 P-Hi:45 Hi:40 Me:34 Lo:29 P-Hi:47 Hi:40 Me:35 Lo:30 50 54 60 49 50 49 Sound pressure level (JIS C9612) dB (A) Outdoor Sound power level (JIS C9612) Outdoor dB(A) 63 64 66 70 70 72 Indoor l/s P-Hi: 217 Hi: 167 Me: 150 Lo: 133 P-Hi:333 Hi:250 Me:217 Lo:167 P-Hi: 400 Hi: 316 Me: 250 Lo: 166 P-Hi:600 Hi:467 Me:417 Lo:317 P-Hi:650 Hi:533 Me:433 Lo:333 P-Hi:800 Hi:583 Me:467 Lo:367 Airflow External Static Pressure Pa Indoor External dimensions (HXWXD) Indoor 100@400 l/s 100@600 l/s 100@650 l/s 100@800 l/s 280 x 950 x 635 280 x 1370 x 740 280 x 1370 x 740 280 x 1370 x 740 640 x 800 (+71) x 290 640 x 800 (+71) x 290 750 x 880 (+88) x 340 840 x 970 x 370 1300 x 970 x 370 1300 x 970 x 370 29 34 34 54 54 54 45 45 60 81 105 105 kg Outdoor Liquid line Refrigerant piping 100@333 l/s 280 x 950 x 635 mm Outdoor Net weight 100@217 l/s 280 x 750 x 635 mm Gas line Ø6.35 Ø6.35 Ø9.52 Ø9.52 Ø9.52 Ø9.52 Ø12.7 Ø12.7 Ø15.88 Ø15.88 Ø15.88 Ø15.88 Connection method Refrigerant R410A Products Indoor FDUM60ZJXVF Flare Connection Quantity kg 1.5 1.5 2.95 3.8 4.5 4.5 Pre charged to pipe length m 15 15 30 30 30 30 Maxium Pipe Length m 30 30 50 50 100 100 Supply Air Connection mm 170 x 680 170 x 880 170 x 880 170 x 1200 170 x 1200 170 x 1200 Return Air Connection mm 200 x 660 200 x 860 200 x 860 235 x 1280 235 x 1280 235 x 1280 Controller RC-E5, RC-EX1 or RCN-KIT3-E FDUM71VF FDUM100VF, 125VF, 140VF Models FDUM100VF, 125VF, 140VF 1404 55 124 B A G 71 170 C1 Hole 180 104 D 1200 Duct dimension 104 C2 Max. drain lift 92 15 Air supply duct 295 325 30 600 or less 280 250 184.5 134.5 E 43 467 18 284 81 59 69 M C2 Hole for wiring Suspension bolts M10 Outside air opening 150 Knock out for ducting Air outlet opening G 125 Knock out for ducting 450X450 H Inspection hole Notes 1 The model name label is attached on the lid of the control box. 4 4 2 Prepare the connecting socket VP20 or VP25 on site. 4 4 Holes for Holes for tapping screws 152 285 tapping screws Control box Suspension bolts pitch 30 Duct dimension 635 510 471 413 170 Drain piping Drain piping Gravity drainage F F 530 113 G View M 90 C1 15.88 5 8" Flare 9.52 3 8" Flare VP20 standard:I.D.20, O.D.26 or VP25 Used with attached socket:I.D.25, O.D.34 Note 2 VP20 standard:I.D.20, O.D.26 or VP25 Used with attached socket:I.D.25, O.D.34 D E Return air duct 1368 Content Gas piping Liquid piping 113 24.5 205 24.5 14 4 Holes for tapping screw 18 Hanger plate for suspension bolt 139 30 or less 880 Duct dimension C2 76 50 D F 105 295 325 15 Air supply duct Hole Max. drain lift E 43 262 4 4 Holes for tapping screws 170 600 472 135 Suspension bolts pitch 152 124 B A 58 67 Duct dimension C1 69 G 170 Installed on site 45 4 4 Holes for tapping screws Drain hose piece Accessory 28 18 284 81 28 950 Suspension bolts pitch Suspension bolts pitch A B 64 100 139 Air outlet opening 125 Knock out for ducting H 450X450 Inspection hole Notes 1 The model name label is attached on the lid of the control box. 2 Prepare the connecting socket VP20 or VP25 on site. Control box 55 D E 1280 Duct dimension 4 280=1120 280 G F M C1 C2 Symbol 64 100 170 986 18 Hanger plate for suspension bolt 9.52 3 8" Flare VP20 standard:I.D.20, O.D.26 or VP25 Used Drain piping with attached socket:I.D.25, O.D.34 Note 2 Drain piping VP20 standard:I.D.20, O.D.26 or VP25 Gravity drainage Used with attached socket:I.D.25, O.D.34 Hole for wiring M10 Suspension bolts Outside air opening 150 Knock out for ducting F Return air duct 14 4 Holes for tapping screw Liquid piping 175 39 31 170 Installed on site Flare 235 Drain hose piece Accessory Duct dimension B Content 15.88 5 8" 23.5 Symbol A Gas piping 65 46 21.5 860 Duct dimension 4 200=800 200 31 41 200 65 46 280 250 Duct dimension Model FDUM71VF F G View M 90 738 635 468 405 170 30 467 9 10 Simple setting by tapping button only Run / Stop High power operation Energy-saving operation Maximum capacity operation (Max 15 minutes) • Increased compressor speed • Increased air ﬂow • Changes set temperature at 28ºC in cooling mode and 22ºC in heating mode, 25ºC in auto mode. • Operation correction by outdoor temperature Main functions Energy management Peak cut timer • Automatic temperature set back • Weekly timer • Set ON/OFF timer by hour • Set ON/OFF timer by clock • Fan only operation • Sleep timer Comfort Individual ﬂap control • High power operation • External ventilation ON/OFF • Warm up operation Automatic fan speed • Temperature increment setting by 0.5ºC FDUA.FDUM series Inverter Ducted Air Conditioners 2013 Easy operation coNtroL Advanced touch screen panel with full dot Liquid Crystal Display All settings done by tapping touch screen panel Operation mode setting screen Setting temperature screen The operation mode can be selected by simply tapping this button. You can select the desired temperature by tapping the ▲▼ button. Operation mode Cooling Dry Auto Fan Heating Convenience LCD contrast setting • Back light setting • Filter clean sign • Control sound • Outdoor silent mode • Summer time setting • Home leave mode • Indoor & outdoor temperature display • Heating standby display • Defrosting operation display • Auto cooling/heating display • ºC/ºF display • Administrator settings • Room name setting Service Error code display • Operation data display • Next service data display • Contact company display • USB connection (mini-B) 11 12 Advanced Technology. Our advanced technology has allowed us to achieve high efficiency, powerful heating and long distance refrigerant piping specifications. This feature permits installation of the units when a heating operation under temperature conditions down to -20˚C is required. Design flexibility has been improved by an extension of the refrigerant piping length to 100m (12.5 & 14.0kW). Blue Fin Micro 5.0 & 6.0kW 7.1kW Blue Fin 10.0kW Long piping (in case of 12.5 & 14.0kW) Height difference (Outdoor higher than Indoor) Piping length 30m 12.5 & 14kW Strong heating (in case of 7.1~14.0kW) -20C -15C : Heating operation down to -20C : Nominal heating capacity maintained at -15C Heating -20C -30 -20 +20C Cooling -15C 100m FDUA.FDUM series Inverter Ducted Air Conditioners 2013 16kW -10 0 10 20 +43C 30 40 50 Powerful heating capacity Heating capacity (in case of 12.5kW) (kW) 18.0 Keeping nominal heating capacity at -15C 14.5 14.0 Hyper Inverter -15C Hyper Inverter 40C nominal heating capacity 14.0kW 2C Heating capacity 50C 30C Micro Inverter 8.8 0 Temperature of supply air can reach 40C in 4 minutes after start up under low temperature operation conditions (at both indoor and outdoor temperature of 2C) and can reach 50C in 8 minutes after that. FEAturEs Maximum heating capacity has been increased by optimising refrigeration control, the use of electronic expansion valves and our twin rotary compressors. The Hyper Inverter series can reach the set temperature very quickly. Normal heating capacity can be maintained when the outdoor temperature is -15°C. It is very effective for use in cold areas. 20C 7C Micro Inverter 10C Micro Inverter 0C 4minutes 8minutes Compact design of outdoor units FDC100VN 10.0kW Our single fan micro 10.0kW condenser is one of the most compact in the industry being only 845(h)x970(w)x370(d) Size reduction and high efficiency performance of the DC twin rotary compressor Outside diameter of shell ø185mm Former compressor Reduction in height by 22.3% Reduction in volume by 44.1% ø133mm Height at 342mm Height at 440 mm The DC twin rotary compressor can operate at speeds as high as 120 rps to achieve the required capacity. Vector control provides perfect compressor control. Starting current has reduced significantly and vibration has been minimized. New model DC rotary compressor * Vector control: To convert the current wave to a smooth sinusoidal waveform. Improved efficiency of the heat exchanger Re-designing the fins to a straight shape has reduced the pressure loss of the air flow in the heat exchanger. A new surface treatment on the fins has enhanced the frost resistance capacity compared to former models. A high speed fan motor has increased the airflow which allows cooling capacity to be maintained even at high outdoor air temperatures. Former model Current model Protection Improved operation of the electronic expansion valve allows for more reliable oil return and this assists to protect the compressor. 13 14 Hyper Inverter Outdoor Unit. 5.0~16.0kW. Micro SRC50ZJX-S SRC60ZJX-S FDC71VNX FDC100VN FDC125VNX FDC140VNX Blue Fin 7.1-14.0kW Due to application of blue coated fins (KS101) for the heat exchanger of the new outdoor unit, corrosion resistance has been improved compared to previous models. FDC160VSX Base heater kit (option) This kit is recommended to be used in an area where the temperature drops below 0˚C. Blue Fin CW-H-E applied for FDC100VN FDC125~140VNX Installation workability Enhanced installation workability thanks to the extended pipe length – one of the longest levels in the industry. Units are pre-charged with refrigerant. Piping length–100m (Hyper Inverter 12.5~14.0kW) Micro Inverter Height difference Height difference (Outdoor higher than Indoor) (Outdoor higher than Indoor) Piping length Piping length Piping length Height difference 5~6 30m 20m 7.1 50m 30m 12.5~14 100m 30m 16 70m 30m kW kW 10 Piping length Height difference 50m 30m Refrigerant precharged piping length extending to 30m Refrigerant precharged piping length extends up to 30m. (5.0 & 6.0kW up to 15m) This eliminates the need to add refrigerant on site, which sets it free from the trouble of excessive or insufficient charging of refrigerant and allows carrying out the installation smoothly. FDUA.FDUM series Inverter Ducted Air Conditioners 2013 High efficiency Increase of heat transfer efficiency Heat transfer efficiency has improved by using high efficiency piping and by the redesign of the heat exchanger from 2 to 1 piece. FEAturEs Reduction of air flow pressure loss Pressure caused by air flow in the indoor unit is reduced by making the air outlet larger. The reduction of pressure reduces the load on the fan motor so efficiency increases. Convenience CnT terminal XR2 XR3 XR4 XR5 output1 (run) output2 (heat) output3 (comp on) output4 (alarm) in put Power source CnT A dry contact is fitted to each indoor unit which is used when a signal output is required. common XR1 XR2 XR3 XR4 XR1 XR5 XR1~5 : approx. DC12v Monitoring Function Condensers are fitted with RS232C so you can connect directly to your PC for monitoring. MHI service software, Mente PC makes service tasks simple. Remote control RC-E5 The new remote control for all indoor units. Non-polar 2 core wiring is used. Installation is easier. Previous 3-core Current 2-core All models employ R410A with RoHS* directive Employment of lead free solder Adapt to RoHS In order to comply with RoHS standard, the new inverter series use lead free solder. Employment of refrigerant All models of the FD inverter series use refrigerant R410A characterized by the ozone depletion coefficient being 0. *"RoHS" is the abbreviation of the new European standard, which means Restriction of Hazardous Substances. 15 Before starting use Heating performance Refrigerant leakage The heating performance values (kW) described in catalog are the values obtained by operating at an outdoor temperature of 7C and indoor temperature of 20C as set forth in the ISO Standards. As the heating performance decreases as the outdoor temperature drops, if the outdoor temperature is too low and the heating performance is insufficient, use other heating appliances as well. The refrigerant (R410A) used for Air conditioner is non-toxic and nonflammable in its original state. However, in consideration of a state where the refrigerant leaks into the room, measures against refrigerant leaks must be taken in small rooms where the tolerable level could be exceeded. Take measures by installing ventilation devices, etc. Indication of sound values The sound values are the values (A scale) measured in a chamber such as an anechoic chamber following the ISO Standards. In the actual installation state, the value is normally larger than the values given in the catalog due to the effect of surrounding noise and echo. Take this into consideration when installing. Use in oil atmosphere Avoid installing this unit in as atmosphere where oil scatters or builds up, such as in a kitchen or machine factory. If the oil adheres to the heat exchanger, the heat exchanging performance will drop, mist may be generated, and the synthetic resin parts may deform and break. Use in acidic or alkaline atmosphere If this unit is used in acidic atmosphere such as hot spring areas having high level of sulfuric gases or in alkaline atmosphere including ammonia or calcium chloride, places where the exhaust of the heat exchanger is sucked in, or at coastal areas where the unit is subject to salt breezes, the outer plate or heat exchanger, etc., will corrode. Please ask a dealer or specialist when you use an air conditioner in places differing from a general atmosphere. Use in snowy areas Take the following measures when installing the outdoor unit in snowy areas. Snow prevention Install a snow-prevention hood so that the snow does not obstruct the air intake port or enter and freeze in the outdoor unit. Snow piling In areas with heavy snow fall, the piled snow could block the air intake port. In this case, a frame that is 50cm or higher than the estimated snow fall must be installed underneath the outdoor unit. Automatic defrosting device If the temperature is low, and the humidity is high, frost will stick to the heat exchanger of the outdoor unit. If use is continued, the heating performance will drop. The “Automatic defrosting device” will function to remove this frost. After heating for approx, three to ten minutes, it will stop, and the frost will be removed. After defrosting, hot air will be blown again. Servicing the air-conditioner Use in places with high ceilings If the ceiling is high, install a circulator to improve the heat and air flow distribution when heating. After the air-conditioner is used for several seasons, dirt will build up in the air-conditioner causing the performance to drop. In addition to regular servicing, we recommend the maintenance contract (charged for) by a specialist. Safety Precautions Air-conditioner usage target Installation The air-conditioner described in this catalog is a dedicated cooling/heating device for human use. Do not use it for special applications such as the storage of foodstuffs, animals or plants, computer server rooms, precision devices or valuable art, etc. This could cause the quality of the items to drop, etc. Do not use this for cooling vehicles or ships. Water leakage or current leaks could occur. Always commission the installation to a dealer or specialist. Improper installation will lead to water leakage, electric shocks and fires. Make sure that the outdoor unit is stable in installation. Fix the unit to stable base. Before use Always read the “User,s Manual” thoroughly before starting use. Usage place Do not install in places where combustible gas could leak or where there are sparks. Installation in a place where combustible gas could be generated, flow or accumulate, or places containing carbon fibers could lead to fires. Only persons that are qualified and licensed are permitted to install and service products that contain refrigerants in Australia, go to www.arctick.org. Suitable access for service must be provided in compliance with industry standards and local regulations. MHIAA is proudly sponsoring Monika’s Doggie Rescue Australia: New Zealand: ABN 92 133 980 275 G.S.T. 105-673-620 Phone: 1300 138 007 Fax: 1800 644 329 NSW & Head Office Victoria Queensland Western Australia Phone: 0800 138 007 Fax: 09 442 5346 Auckland 9C Commercial Road Kingsgrove NSW 2208 PO Box 318 Kingsgrove NSW 1480 2/24 Lakeside Drive Burwood East VIC 3151 5/26 Flinders Parade North Lakes QLD 4509 Unit 3A 2 Mulgul Rd Malaga WA 6090 PO Box 667 Belmont WA 6104 Unit 2 100 Bush Road Albany 0632 PO Box 300552 Albany 0632 www.mhiaa.com.au www.mhiaa.co.nz MrE sPArE PArts www.mrespareparts.com.au Tel: +61 (0) 2 9600 7444 Fax: +61 (0) 2 9600 8044 ISO9001 ISO14001 BIWAJIMA PLANT Mitsubishi Heavy Industries, Ltd. Air-conditioning & Refrigeration Systems Headquarters Certified ISO 9001 Certificate number : JQA-0709 MITSUBISHI HEAVY INDUSTRIESMAHAJAK AIR CONDITIONERS CO., LTD. Certified ISO 9001 Certificate Number : 04100 1998 0813 Our Air Conditioning & Refrigeration Systems Headquarters has been assessed and found to comply with the requirements of ISO14001. ISO 14001 Certificate 04104 1998 0813 E5 BIWAJIMA PLANT Mitsubishi Heavy Industries, Ltd. Air-conditioning & Refrigeration Systems Headquarters Certified ISO 14001 Certificate number : JQA-EM0256 MITSUBISHI HEAVY INDUSTRIESMAHAJAK AIR CONDITIONERS CO.,LTD. Certificate Number : 04104 1998 0813 E5 Because of our policy of continuous improvement, we reserve the right to make changes in all specifications without notice. E&OE. MHIAA314_FD 12_2012 Our Air Conditioning & Refrigeration Systems Headquarters is an ISO9001 approved factory for residential air conditioners and commercial-use air conditioners (including heat pumps).
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project