LP SERIES All-Plastic Pictogram Exit Sign Commercial-grade,

LP SERIES All-Plastic Pictogram Exit Sign Commercial-grade,
N
Type:
new product
LP SERIES
Project/Location:
Contractor:
Prepared By:
All-Plastic Pictogram Exit Sign
Commercial-grade,
universal-mount and snap-fit
FEATURES
The Lumacell® LP Series is a compact pictogram Exit Sign with an all-in-one,
snap-fit design. Easy to install and affordable, the LP Series Exit Sign is ideally
suited for commercial applications, especially those in which large numbers of
Exit Signs are required.
∙∙ Durable, factory white, thermoplastic housing
∙∙ Universal mounting: wall, end, or ceiling mount
∙∙ Long-life white LED light source
∙∙ Certified CSA 22.2 No.141-10 for pictogram safety signs
∙∙ Two-wire universal AC input: 120 to 347VAC; two-wire standard
DC input: 6 to 24VDC
∙∙ Energy efficient – consumes less than 2.5W in
AC mode and only 1W in DC-remote
∙∙ Self-Powered model delivers standard two hours of back-up lighting
∙∙ Optional vandal-proof shield and tamper-proof screws
Date:
Model No.:
TYPICAL SPECIFICATIONS
Supply and install the Lumacell® LP pictogram Exit Sign. The equipment shall
operate with universal 2-wire AC input voltage of 120 to 347VAC at less than
2.5W and universal 2-wire DC input voltage from 6 to 24VDC at 1W consumption
for single and double face signs. The sign shall come standard with a canopy
and shall be suitable for wall, end, or ceiling mounting. The frame, faceplates,
back plate and canopy shall each be constructed of a one-piece UV-stabilized
thermoplastic material colored factory white. The light source shall be white
light-emitting diodes (LED) and shall provide even illumination in normal and
emergency operation. The equipment in a Self-Powered configuration shall use
a sealed Nickel-Cadmium battery of 2.4V nominal voltage. The equipment shall
recharge the battery in 24 hours and stay illuminated at least two hours upon
AC failure.The pictogram Exit Sign shall be listed to the CSA 22.2 No.141-10
standard.
Equipment is Lumacell® Model: ________________________________
DIMENSIONS
Dimensions are approximate and subject to change.
< PICTOGRAM
LEFT FROM HERE
PICTOGRAM
STRAIGHT FROM HERE
PICTOGRAM >
RIGHT FROM HERE
8-7/8” [22.5 cm]
8” [20.3 cm]
6-1/8” [15.6 cm]
4-1/2” [11.4 cm]
12-1/8” [30.7 cm]
2-1/4” [5.7 cm]
13” [33.0 cm]
POWER CONSUMPTION AND UNIT RATING
MODEL
AC only
AC/DC standard
AC/Special DC
AC SPECS
DC SPECS
120 to 347VAC
120 to 347VAC
120 to 347VAC
Less than 2.5W
Less than 2.5W
Less than 2.5W
6 to 24VDC
36, 48, 120VDC
Less than 1.5W
Less than 2.5W
Two-wire 120V AC/DC
120Vac
Self-Powered
120 to 347VAC
Less than 2.5W
120VDC
Less than 2.5W
Less than 3W
Nickel-Cadmium Battery
Min. 2 hours
ORDERING INFORMATION
SERIES
LP= plastic
pictogram
FACES/MOUNTING
1= single face, universal
mounting
2= double face, universal
mounting
3= universal face, universal
mounting
ENCLOSURE COLOUR
B= black
W= factory white
VOLTAGE
S= 120 to 347VAC; self-powered
U= universal 120 to 347VAC; 6 to 24VDC
U00= 120 to 347VAC only
U36= 120 to 347VAC 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
24= 2-wire 6 to 24VDC
2120= 2-wire 120VAC/VDC
OPTIONS
TP= tamper-proof screws*
VR= v andal resistant shield with
tamper-proof screws*
*990.0119-L= Tamper-proof bit (sold separately)
* Option VR not available with universal face
EXAMPLE: LP1WUVR
14
www.lumacell.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement