Miele Compact C2 Allergy Ecoline Vacuum Cleaner Instruction manual

Below you will find brief information for Vacuum cleaner HS 14. This vacuum cleaner is suitable for daily vacuuming of carpets, rugs and resilient hard floors. It comes fitted with a switchable floorhead. You can also clean stairs with this vacuum cleaner. This vacuum cleaner features a retractable cable and a variety of accessories for different cleaning tasks.

PDF Download
Document
Miele Vacuum cleaner HS 14 Operating Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Retractible cable
  • Switchable floorhead
  • Dustbag change indicator
  • AirClean filter
  • Various accessories

Frequently asked questions

Press the release buttons on the side of the suction nozzle and pull it out of the suction opening. Press the release button in the handle recess and open the dust compartment lid until it latches. Pull the dustbag out of the compartment by the handle tab. Insert the new dustbag into the red compartment until it stops. Leave it folded as you removed it from the packaging. Unfold the dustbag inside the dust compartment as far as possible. Close the dust compartment lid until it latches. Make sure the dustbag is not trapped. Close the lid until it latches. Make sure the dustbag is not trapped. A no-empty-run safety interlock prevents the dust compartment lid from closing if no dustbag is inserted. Do not use force!

When the dustbag change indicator is red.

Check which exhaust filter is fitted to your vacuum cleaner. When the exhaust filter display is red you should replace the filter. To replace the AirClean filter open the dust compartment lid. Press the filter grate release buttons together and open the filter grate until it latches. Remove the old AirClean exhaust filter by one of the two clean hygienic surfaces. Insert a new AirClean exhaust filter. Close the filter grate. Close the dust compartment lid.

You can replace the thread lifters on the floorhead if they are worn-out. Lift the thread lifters out of the slots. For example, use a slotted screwdriver. Replace the thread lifters with new ones.
Preparing document for printing…
0%