Danfoss Refrigeration new catalog

Danfoss Refrigeration new catalog
MAKING MODERN LIVING POSSIBLE
Quick Selection
G R U P A
Automatic Controls, Compressors
and Condensing units
d.o.o.
REFRIGERATION &
AIR CONDITIONING DIVISION
Catalogue
Refrigerant conversion table
2#
$EW
d.o.o.
;²#=
;²&=
G R U P A
2# ;²#=
$EW
;²&=
2#
"UBBLE
;²#=
2A
;²&=
;²#=
;²&=
;²#=
;²&=
2# ;²#=
"UBBLE ;²&=
2A
2!
2
;²#=
;²&=
2
;²#=
2
;²&=
0ABS;PSIA=
0E;PSIG=
2! ;²#=
;²&=
;²#=
;²&=
;²#=
;²&=
0ABS;PSIA=
0E;IN(G=
;²#=
;²&=
;²#=
2!
;²&=
0ABS;BAR=
0E;BAR=
2
;²#=
;²&=
0ABS;BAR=
0E;BAR=
2!
;²#=
2
;²&=
0ABS;PSIA=
0E;PSIG=
2
;²#=
;²&=
0ABS;PSIA=
0E;IN(G=
0ABS;BAR=
0E;BAR=
2
0ABS;BAR=
0E;BAR=
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Table of contents
1. Expansion valves
7. Line components – Industrial
Thermostatic expansion valves
Thermostatic expansion valves .............. T2, TE2 ................................ 6
Thermostatic expansion valves ............. TE5-55 ................................ 10
Thermostatic expansion valves ............. TUA, TUAE and TCAE ..... 14
Thermostatic expansion valves ............. PHT ..................................... 20
Filters ............................................................... FIA, FIA-SS ........................ 100
Liquid level glasses .................................... LLG ...................................... 102
Electronically operated
Expansion valves ........................................ AKV ..................................... 24
Electrical expansion valves ..................... ETS ...................................... 28
9. Electronic controls
2. Solenoid valves and coils
Solenoid valves and coils ......................... EVR ...................................... 30
Solenoid valves ........................................... EVRA and EVRAT ............ 32
4-Way Reversing valves ............................ VHV and STF .................... 34
3. Pressure controls and thermostats
Pressure controls and thermostats ......
Cartridge pressure controls .....................
Thermostat ...................................................
Pressure controls and thermostats .......
KP ........................................
ACB .....................................
UT ........................................
RT ........................................
36
38
40
42
Gas detectors ............................................... GD ....................................... 104
Refrigeration controllers ..........................
...........................................................................
Controller for appliance control ............
Temperature controller ............................
Universal refrigeration controller .........
System manager .........................................
Media temperature control ....................
Controller interface ....................................
Condenser fan speed controls ...............
Capacity controllers ....................................
...........................................................................
EKC 315A ..........................
EKC 202 .............................
AK-CC 550 .........................
EKC 102 .............................
AK-CC 210 .........................
AK-SM 350 ........................
EKC 361 ..............................
EKC 366 .............................
XGE/RGE ............................
EKC 331T ...........................
AK-PC 530 .........................
106
108
110
112
114
116
118
120
122
124
126
10. Sensors and transmitters
Sensors and transmitters .......................................................................... 128
4. Pressure regulators
Pressure regulators ....................................
Pressure regulators ....................................
Pressure regulators ....................................
Pressure regulators ....................................
Pressure regulators ....................................
Capacity regulator ......................................
Motor valves .................................................
Pilot controlled servo valves ..................
8. Gas Detector
KVP ......................................
KVR and NRD
KVL ......................................
KVD .....................................
KVC .....................................
CPCE ...................................
ICM 20-65 .........................
ICS 25-65 ...........................
46
48
50
52
54
56
58
62
5. Water valves
11. Compressors range
Compressors .................................................................................................
Direct current reciprocating compressors .........................................
Reciprocating Compressors .....................................................................
Scroll compressors .....................................................................................
131
133
145
153
12. Condensing units range
OPTYMATM condensing units .................................................................. 167
OPTYMA PLUSTM condensing units ...................................................... 185
Pressure controlled water valve ............ WVFX .................................. 68
Thermostatic controlled water valves AVTA ................................... 70
6. Line components – Commercial
GBC .....................................
NRV and NRVH ...............
OUB ....................................
HE ........................................
SGN/H, SGR, SGRN/H ....
DML ....................................
DCR .....................................
DMB ....................................
DMC ....................................
DAS .....................................
SVA ......................................
REG and REG-SS .............
72
74
76
78
80
82
84
88
90
92
94
98
G R U P A
Ball valves ......................................................
Check valves .................................................
Oil separator .................................................
Heat exchanger ...........................................
Sight glasses .................................................
Liquid line filter driers ...............................
Filter driers ....................................................
Bi-flow filter driers ......................................
Combi filter driers .......................................
Burn-out filter drier ....................................
Stop valves ....................................................
Regulating valves .......................................
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Contents
3
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
4
Table of contents – Type
ACB .............................................................................................................................................................................................................................................................. 38
AK-CC 210 .................................................................................................................................................................................................................................................. 114
AK-CC 550 .................................................................................................................................................................................................................................................. 110
AK-PC 530 .................................................................................................................................................................................................................................................. 125
AK-SM 350 ................................................................................................................................................................................................................................................. 116
AKV .............................................................................................................................................................................................................................................................. 24
AVTA ............................................................................................................................................................................................................................................................ 70
Compressors ............................................................................................................................................................................................................................................. 131
CPCE ............................................................................................................................................................................................................................................................ 56
DAS .............................................................................................................................................................................................................................................................. 92
DCR .............................................................................................................................................................................................................................................................. 84
Direct current reciprocating compressors .................................................................................................................................................................................... 133
DMB ............................................................................................................................................................................................................................................................. 88
DMC ............................................................................................................................................................................................................................................................. 90
DML ............................................................................................................................................................................................................................................................. 82
EKC 102 ...................................................................................................................................................................................................................................................... 112
EKC 202 ...................................................................................................................................................................................................................................................... 108
EKC 315A ................................................................................................................................................................................................................................................... 106
EKC 331T .................................................................................................................................................................................................................................................... 124
EKC 361 ....................................................................................................................................................................................................................................................... 118
EKC 366 ...................................................................................................................................................................................................................................................... 129
ETS ............................................................................................................................................................................................................................................................... 28
EVR ............................................................................................................................................................................................................................................................... 30
EVRA and EVRAT ..................................................................................................................................................................................................................................... 32
FIA, FIA-SS ................................................................................................................................................................................................................................................. 100
GBC .............................................................................................................................................................................................................................................................. 72
GD ................................................................................................................................................................................................................................................................ 105
HE ................................................................................................................................................................................................................................................................. 78
ICM 20-65 .................................................................................................................................................................................................................................................. 58
ICS 25-65 .................................................................................................................................................................................................................................................... 62
KP .................................................................................................................................................................................................................................................................
KVC ..............................................................................................................................................................................................................................................................
KVD ..............................................................................................................................................................................................................................................................
KVL ...............................................................................................................................................................................................................................................................
KVP ...............................................................................................................................................................................................................................................................
KVR and NRD ............................................................................................................................................................................................................................................
36
54
52
50
46
48
LLG ............................................................................................................................................................................................................................................................... 102
NRV and NRVH ........................................................................................................................................................................................................................................ 74
OPTYMA PLUSTM condensing units ................................................................................................................................................................................................... 185
OPTYMATM condensing units ............................................................................................................................................................................................................... 167
OUB .............................................................................................................................................................................................................................................................. 76
PHT ............................................................................................................................................................................................................................................................... 20
Reciprocating Compressors................................................................................................................................................................................................................. 145
REG and REG-SS ....................................................................................................................................................................................................................................... 98
RT................................................................................................................................................................................................................................................................... 42
Scroll compressors .................................................................................................................................................................................................................................. 153
Sensors and transmitters ..................................................................................................................................................................................................................... 128
SGN/H, SGR, SGRN/H .............................................................................................................................................................................................................................. 80
SVA ................................................................................................................................................................................................................................................................ 94
T2, TE2.......................................................................................................................................................................................................................................................... 6
TE5-55 ......................................................................................................................................................................................................................................................... 10
G R U P A
TUA, TUAE and TCAE .............................................................................................................................................................................................................................. 14
UT .................................................................................................................................................................................................................................................................. 40
VHV and STF .............................................................................................................................................................................................................................................. 34
WVFX ........................................................................................................................................................................................................................................................... 68
d.o.o.
XGE/RGE ..................................................................................................................................................................................................................................................... 122
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Contents
5
T2 / TE2: reliable and easy to use
Thermostatic expansion valves regulate the injection of liguid refrigerant into evaporators. Injection is
controlled by the refrigerant superheat. Therefore the valves are especially suitable for liquid injection in
”dry“ evaporators where the superheat at the evaporator outlet is proportional to the evaporator load.
Features
Stainless steel capillary tube
and bulb:
- high corrosion resistance
- high strength and vibration
resistance
Laser-welded power element
in stainless steel
- longer diaphragm life
- high pressure tolerance
and working pressure
- high corrosion resistance
Laser-engraved label
Flare or solder outlet
Interchangeable
orifice assembly with
dirt protection filter
Easy adjustment of
superheat setting
Inlet in flare.
Solder adaptor is an option
Applications
Advantages
Facts
· Traditional refrigeration
· Large temperature range.
Equally applicable to freezing,
refrigeration and air conditioning
applications.
· Can be supplied with MOP
(Max. Operating Pressure)
Protects the compressor motor
against excessive evaporating pressure during normal operation.
· Heat pump systems
· Air conditioning units
· Liquid coolers
· Ice cube machines
· Rated capacities from 0.5 to 15.5 kW
for R22.
G R U P A
· Transport refrigeration
· Interchangeable orifice assembly
· easy stocking
· easy capacity matching
· better service
· Valves for special temperature ranges
can be supplied.
· Flare / solder adaptor can be supplied.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
6
Technical data and ordering
Thermostatic element with: bulb strap, without: orifice, filter cone and nuts
Refrigerant
R22
R407C
R134a
R404A/R507
Pressure
equalization
Flare
Valve
type
Flare × flare connection
Code no. 1)
Connection
Capillary
tube
Range N
–40 to +10°C
Without MOP MOP +15°C
068Z3206
068Z3208
Inlet × outlet
TX 2
-
m
1.5
in. × in.
3
/8 × 1/2
mm × mm
10 × 12
TEX 2
¼ in.
1.5
3
/8 × 1/2
10 × 12
068Z3209
068Z3211
/8 × 1/2
10 × 12
068Z3496
068Z3516
/8 × 1/2
10 × 12
068Z3501
068Z3517
/8 × 1/2
10 × 12
068Z3346
/8 × 1/2
10 × 12
068Z3348
/8 × 1/2
10 × 12
/8 × 1/2
10 × 12
TZ 2
-
1.5
3
TEZ 2
¼ in.
1.5
3
TN 2
-
1.5
3
TEN 2
¼ in.
1.5
3
TS 2
-
1.5
3
TES 2
¼ in.
1.5
3
Range NM
–40 to –5°C
MOP 0°C
068Z3224
Range NL
Range B
–40 to –15°C
–60 to –25°C
MOP –10°C Without MOP MOP –20°C
068Z3226
068Z3207
068Z3228
068Z3225
068Z3227
068Z3210
068Z3229
068Z3347
068Z3393
068Z3369
068Z3349
068Z3392
068Z3370
068Z3400
068Z3402
068Z3406
068Z3408
068Z3403
068Z3405
068Z3407
068Z3401
068Z3410
068Z3409
068Z3404
068Z3411
Thermostatic element with: bulb strap, without: orifice, filter cone and nuts
Refrigerant
R22
R407C
R134a
R404A/R507
Capillary
tube
Pressure
equalization
Solder
Valve
type
Flare × solder connection
Code no. 1)
Range NL
Range B
–40 to –15°C
–60 to –25°C
MOP –10°C Without MOP MOP –20°C
068Z3357
068Z3319
068Z3366
068Z3361
068Z3276
Connection
Inlet
Flare
Outlet
ODF solder
Range N
–40 to +10°C
Without MOP MOP +15°C
068Z3281
068Z3287
068Z3302
068Z3308
TX 2
TX 2
-
m
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
TEX 2
TEX 2
¼ in.
6 mm.
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3284
068Z3305
068Z3290
068Z3311
TZ 2
TZ 2
-
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3502
068Z3329
068Z3514
TEZ 2
TEZ 2
¼ in.
6 mm.
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3446
068Z3503
068Z3447
068Z3515
TN 2
TN 2
-
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3383
068Z3384
068Z3387
068Z3388
TEN 2
TEN 2
¼ in.
6 mm.
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3385
068Z3386
068Z3389
068Z3390
TS 2
TS 2
-
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3414
068Z3435
TES 2
TES 2
¼ in.
6 mm.
1.5
1.5
3
/8 in.
10 mm
1
/2 in.
12 mm
068Z3415
068Z3422
068Z3367
068Z3359
068Z3363
068Z3220
068Z3277
068Z3416
068Z3423
068Z3429
068Z3436
068Z3418
068Z3425
068Z3420
068Z3427
068Z3417
068Z3424
068Z3430
068Z3437
068Z3419
068Z3426
068Z3421
068Z3428
Orifice assembly
Range N: –40 to +10°C
Rated capacity
in tons (TR)
Orifice
no.
Rated capacity
in kW
Range B: –60 to –25°C
Rated capacity
Rated capacity
in tons (TR)
in kW
R404A
R404A
R22
R22
R507
R507
0.15
0.11
0.50
0.38
Code no. 1)
Flare × Flare
version 2)
Solder
adaptor
version 2)
R22
R407C
R134a
0X
0.15
0.16
0.11
R404A
R507
0.11
0.40
R404A
R507
0.38
068-2002
068-2089
00
0.30
0.30
0.25
0.21
1.0
1.1
0.90
0.70
0.20
0.21
0.70
0.70
068-2003
068-2090
01
0.70
0.80
0.50
0.45
2.5
2.7
1.8
1.6
0.30
0.45
1.0
1.6
068-2010
068-2091
02
1.0
1.1
0.80
0.60
3.5
3.8
2.6
2.1
0.60
0.60
2.1
2.1
068-2015
068-2092
03
1.5
1.6
1.3
1.2
5.2
5.6
4.6
4.2
0.80
1.0
2.8
3.5
068-2006
068-2093
04
2.3
2.5
1.9
1.7
8.0
8.6
6.7
6.0
1.2
1.4
4.2
4.9
068-2007
068-2094
05
3.0
3.2
2.5
2.2
10.5
11.3
8.6
7.7
1.5
1.7
5.2
6.0
068-2008
068-2095
06
4.5
4.9
3.0
2.6
15.5
16.7
10.5
9.1
2.0
1.9
7.0
6.6
068-2009
068-2096
R22
R407C
R134a
0.50
0.50
The rated capacity is based on: Evaporating temperature te = +5°C for range N and te = –30°C for range B,
condensing temperature tc = +32°C, and refrigerant temperature ahead of valve tl = +28°C.
Solder adaptor without orifice assembly
Connection - ODF solder
Code no. 1)
068-2062
For flare connection
068-0003
068-2063
For solder adaptor
068-0015
/4 in.
6 mm
6 mm
068-41012)
/8 in.
068-2060
10 mm
068-2061
10 mm
068-41002)
Code numbers in bold are normally on stock and a
shorter delivery time can therefore be expected.
Including filter.
The adaptor is for use with thermostatic
expansion valves T2 and TE2. When the
adaptor is fitted correctly it meets the
sealing requirements of DIN 8964.
The flare orifice in T2 and TE2 can be used
with a solder adaptor when the orifice
filter is replaced with a specific filter
intended for solder adaptors. Only in this
way the sealing requirements of DIN 8964
can be fulfilled.
Solder adaptors for filter driers (FSA) must
not be used in the T2 inlet.
G R U P A
2)
Filter
Filter type
1
3
1)
Code no. 1)
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – T2, TE2
7
Capacities
Valve
type/
Orifice
Cond.
temp.3)
[°C]
T2 / 0X
T2 / 00
T2 / 01
T2 / 02
T2 / 03
T2 / 04
T2 / 05
T2 / 06
T2 / 0X
T2 / 00
T2 / 01
T2 / 02
T2 / 03
T2 / 04
T2 / 05
T2 / 06
T2 / 0X
T2 / 00
T2 / 01
T2 / 02
T2 / 03
T2 / 04
T2 / 05
T2 / 06
T2 / 0X
T2 / 00
T2 / 01
T2 / 02
T2 / 03
T2 / 04
T2 / 05
T2 / 06
25
35
45
55
-35
0.49
0.95
1.6
2.2
3.9
5.7
7.3
8.9
0.53
1.0
1.7
2.3
4.1
6.1
7.7
9.5
0.55
1.0
1.7
2.4
4.3
6.3
8.0
9.8
0.56
1.1
1.7
2.3
4.3
6.4
8.1
9.9
R22
R134a
R404A/R507
R407C
Capacity in [kW]
Evaporating temp. [°C]
-30
-10
0
0.51
0.55
0.54
1.00
1.1
1.1
1.7
2.4
2.7
2.5
3.5
3.9
4.3
6.2
6.9
6.4
9.1
10.2
8.0
11.6
13.0
9.8
14.1
15.9
0.55
0.60
0.61
1.1
1.2
1.3
1.8
2.6
3.0
2.6
3.8
4.4
4.6
6.8
7.9
6.8
10.1
11.8
8.6
12.8
14.9
10.5
15.6
18.2
0.57
0.64
0.65
1.1
1.3
1.4
1.9
2.8
3.2
2.7
4.0
4.8
4.8
7.2
8.5
7.1
10.7
12.7
9.0
13.6
16.1
11.0
16.6
19.6
0.58
0.65
0.67
1.1
1.3
1.4
1.9
2.8
3.3
2.6
4.1
5.0
4.8
7.4
8.9
7.2
11.0
13.3
9.1
14.0
16.7
11.1
17.0
20
Capacity in [kW]
Evaporating temp. [°C]
-10
-5
0
0.40
0.41
0.41
0.73
0.75
0.77
1.3
1.5
1.6
1.9
2.0
2.1
3.3
3.6
3.8
4.8
5.2
5.6
6.1
6.6
7.1
7.5
8.2
8.7
0.44
0.45
0.45
0.79
0.83
0.86
1.4
1.6
1.7
2.0
2.2
2.4
3.6
4.0
4.4
5.3
5.8
6.4
6.7
7.4
8.1
8.2
9.1
9.9
0.45
0.47
0.48
0.82
0.86
0.90
1.5
1.7
1.8
2.1
2.4
2.6
3.8
4.2
4.7
5.6
6.2
6.9
7.0
7.8
8.7
8.6
9.6
10.7
0.45
0.47
0.49
0.81
0.86
0.90
1.5
1.7
1.9
2.1
2.4
2.7
3.8
4.3
4.8
5.7
6.4
7.2
7.0
8.0
9.0
8.7
9.8
11.0
Capacity in [kW]
Evaporating temp. [°C]
-35
-30
-10
0.35
0.37
0.42
0.66
0.70
0.85
1.1
1.2
1.8
1.5
1.7
2.6
2.7
3.1
4.7
4.0
4.6
7.0
5.1
5.8
8.9
6.2
7.1
10.8
0.34
0.36
0.42
0.64
0.69
0.86
1.1
1.2
1.8
1.4
1.7
2.7
2.6
3.0
4.8
3.9
4.5
7.1
4.9
5.6
9.0
6.0
6.9
11.0
0.31
0.33
0.40
0.60
0.64
0.83
0.98
1.1
1.8
1.3
1.5
2.6
2.3
2.7
4.6
3.5
4.1
6.9
4.4
5.2
8.7
5.5
6.4
10.6
0.28
0.30
0.37
0.53
0.57
0.75
0.86
1.0
1.7
1.0
1.3
2.4
1.8
2.2
4.2
2.9
3.5
6.3
3.7
4.4
7.9
4.6
5.4
9.7
Capacity in [kW]
Evaporating temp. [°C]
-5
0
5
0.59
0.59
0.58
1.2
1.3
1.3
2.7
2.9
3.1
4.0
4.3
4.5
7.1
7.6
8.1
10.6
11.4
12.0
13.4
14.4
15.2
16.4
17.6
18.6
0.62
0.63
0.63
1.3
1.3
1.4
2.9
3.1
3.3
4.3
4.6
5.0
7.6
8.3
8.9
11.3
12.3
13.3
14.3
15.6
16.7
17.4
19.0
20
0.63
0.64
0.64
1.3
1.3
1.4
2.9
3.2
3.4
4.3
4.7
5.2
7.7
8.5
9.2
11.5
12.6
13.8
14.5
15.9
17.3
17.7
19.4
21
0.61
0.62
0.63
1.2
1.3
1.3
2.9
3.1
3.4
4.2
4.7
5.1
7.5
8.3
9.1
11.3
12.4
13.7
14.2
15.7
17.2
17.3
19.1
21
5
0.51
1.1
2.7
3.9
7.0
10.5
13.3
16.3
0.60
1.3
3.2
4.7
8.4
12.5
15.8
19.3
0.64
1.4
3.4
5.1
9.2
13.7
17.3
21
0.67
1.4
3.6
5.4
9.6
14.4
18.1
22
-30
0.35
0.61
0.88
1.2
2.2
3.2
4.0
4.9
0.37
0.64
0.93
1.3
2.3
3.4
4.2
5.2
0.38
0.65
0.96
1.3
2.3
3.4
4.3
5.3
0.38
0.63
0.95
1.2
2.2
3.4
4.2
5.2
5
0.40
0.77
1.6
2.2
4.0
5.9
7.5
9.1
0.46
0.88
1.9
2.6
4.7
6.9
8.8
10.7
0.49
0.94
2.0
2.8
5.1
7.6
9.6
11.7
0.50
0.95
2.0
2.9
5.3
7.9
10.0
12.1
-40
0.33
0.61
0.96
1.3
2.4
3.5
4.5
5.5
0.32
0.59
0.92
1.2
2.2
3.3
4.3
5.2
0.29
0.55
0.85
1.1
1.9
3.0
3.8
4.7
0.26
0.48
0.74
0.82
1.5
2.4
3.0
3.8
0
0.41
0.88
2.1
3.0
5.4
8.0
10.2
12.4
0.43
0.92
2.2
3.2
5.7
8.5
10.7
13.1
0.42
0.90
2.1
3.2
5.7
8.4
10.6
12.9
0.39
0.82
2.0
2.9
5.3
7.8
9.9
12.1
-10
0.59
1.2
2.5
3.7
6.6
9.8
12.4
15.1
0.61
1.3
2.7
3.9
7.0
10.3
13.0
15.9
0.62
1.3
2.7
3.9
7.0
10.4
13.2
16.0
0.60
1.2
2.6
3.8
6.8
10.1
12.8
15.6
10
0.55
1.2
3.2
4.6
8.3
12.5
15.7
19.2
0.62
1.4
3.5
5.3
9.4
14.2
17.8
22
0.64
1.4
3.7
5.6
9.9
14.9
18.7
23
0.63
1.3
3.6
5.6
9.9
14.9
18.7
23
3) Condensing temperature at bubble point.
Correction factor
Refrigerant
R22
R134a
R404A/R507
R407C
2
0.98
0.98
0.96
0.97
4
1
1
1
1
10
1.06
1.08
1.10
1.08
15
1.11
1.13
1.20
1.14
20
1.15
1.19
1.29
1.21
Subcooling [K]
25
1.20
1.25
1.37
1.27
30
1.25
1.31
1.46
1.33
35
1.30
1.37
1.54
1.39
40
1.35
1.42
1.63
1.45
45
1.39
1.48
1.70
1.51
50
1.44
1.54
1.78
1.57
When the subcooling ≠ 4 K then:
1. Table value x Factor = Plant capacity
2. Plant capacity / Factor = Table value
Example:
Refrigerant = R407C
Qnom = 10 kW
te = 0°C
tc = 55°C
Δtsub = 25 K
+
Thermostatic valve
Orifice
Right selection:
2. 10 kW / 1.27 = 7.9 kW → T2, Orifice 03
G R U P A
Selection:
1. T2, Orifice 04 = 12.4 kW x 1.27 = 15.75 kW → Valve too large
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
8
The complete Danfoss program of thermostatic expansion valves:
Rated capacities in kW for range N
Type
Connections
R22
R134a
R404A / R507
R407C
R410A
0.5 - 15.5
0.4 - 10.5
0.38 - 9.1
0.5 - 16.7
-
TUA and TUAE 1)
0.6 - 16
0.45 - 12
0.45 - 12
0.63 - 17
1.3 - 26
Solder
Bi-metal (stainless steel / copper)
TUB and TUBE 2)
0.9 - 16
0.7 - 12
0.7 - 12
0.92 - 17
1.3 - 26
Solder
Bi-metal (stainless steel / copper)
17.5 - 26.5
12 - 18
13.5 - 20
19.0 - 28.5
23 - 34
Solder
Bi-metal (stainless steel / copper)
28 - 245
18 - 196
21 - 187
28 - 245
28 - 350
Solder
Bi-metal (stainless steel / copper)
19.7 - 356
12.9 - 220
13 - 197
21.3 - 385
-
Flare / solder /solder flanges
105 - 1890
55 - 1083
99 - 1623
117 - 2020
-
Solder or weld flanges
10.5 - 140
5.7 - 79
8.4 - 109
10.5 - 140
-
Solder (copper)
T 2 and TE 2 1)
TCAE 1) and TCBE 2)
TRE 10 - TRE 80 2)
TE 5 - TE 55 1)
PHT
1)
TDE and TDEB 2)
Flare x flare and flare x solder
Solder x solder (solder adaptor)
1)
Interchangeable orifice.
2)
Fixed orifice.
Thermostatic expansion valves parts program:
T 2 and TE 2
+
Orifice
Thermostatic valve
TUA/TUAE and TCAE
+
Orifice
Thermostatic valve
TE 5 - TE 55
+
Thermostatic element
+
Valve body
Orifice
+
Orifice
+
Valve body
Flanges
d.o.o.
Thermostatic element
+
G R U P A
PHT
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – T2, TE2
9
TE5-55: flexible solution for medium sized refrigeration plants
Thermostatic expansion valves TE5-55 regulate the injection of refrigerant liquid into evaporators for
medium sized plants (rated capacities from 19 to 356 kW for R22). Injection is controlled by the refrigerant superheat. Therefore the valves are especially suitable for liquid injection in ”dry“ evaporators where
the superheat at the evaporator outlet is proportional to the evaporator load.
Features
Stainless steel capillary tube and bulb:
- high corrosion resistance
- high strength and vibration resistance
Laser-welded power element in stainless steel:
- longer diaphragm life
- high pressure tolerance and working pressure
- high corrosion resistance
Large parts program ensures
minimal stocks
Easy adjustment of
superheat setting
More connection possibilities
- solder × solder
- flare × flare
- flanges
- straightway or angleway
To ensure long operating life, the valve
cone and seat are made of a special alloy
with particularly good wear qualities.
Applications
Advantages
Facts
· Traditional refrigeration
· Interchangeable orifice assembly
designed for:
· Ice cube machines
· Easy assembly and mounting
· Water chillers
· Optimised capacity matching
· Available with MOP
(Max. Operating Pressure). Protects
the compressor motor against excessive evaporating pressure.
· Balanced port (TE55 only)
· Rated capacities:
· Air conditioning units
· Large temperature range –60 to +10°C
TE5-20: From 19.7 to 108 kW for R22
From 239 to 356 kW for R22
· Maximum Working Pressure: 28 bar
G R U P A
TE55:
· Refrigerants:
R22, R134a, R404A/R507 and R407C
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
10
Technical data and ordering: Orifice assembly
R22
Orifice assembly
Valve type
Rated capacity
Range N:
–40 to 10°C
kW 1)
Rated capacity
Range B:
–60 to –25°C
kW 1)
Orifice no.
2)
Code no. 2)
Valve type
Rated capacity
Range N:
–40 to 10°C
kW 1)
Orifice no.
Code no. 2)
TEX 5-3
19.7
11.9
01
067B2089
TEN 5-3.7
12.9
01
067B2089
TEX 5-4.5
26.9
16.7
02
067B2090
TEN 5-5.4
19.1
02
067B2090
TEX 5-7.5
38.8
24.8
03
067B2091
TEN 5-8.3
29.1
03
067B2091
TEX 5-12
55.3
35.4
04
067B2092
TEN 5-11.2
39.6
04
067B2092
TEX 12-4.5
26.8
17.2
01
067B2005
TEN 12-4.7
16.7
01
067B2005
TEX 12-7.5
43.4
28.2
02
067B2006
TEN 12-7.7
27.2
02
067B2006
TEX 12-12
64.0
41.4
03
067B2007
TEN 12-11.4
40.0
03
067B2007
TEX 12-18
84.4
55.9
04
067B2008
TEN 12-15
53.0
04
067B2008
TEX 20-30
108.0
70.0
01
067B2172
TEN 20-18
65.0
01
067B2170
TEX 55-50
239.0
148.0
01
067G2005
TEN 55-41
145.0
01
067G2001
TEX 55-85
356.0
228.0
02
067G2006
TEN 55-62
220.0
02
067G2002
Valve type
Rated capacity
range N:
–40 to 10°C
kW 1)
Rated capacity
range B:
–60 to –25°C
kW 1)
Orifice no.
Code no. 2)
TES 5-3.7
13.0
8.0
01
TES 5-5.0
17.6
11.2
02
TES 5-7.2
25.3
16.6
TES 5-10.3
36.2
TES12-4.2
R404A/R507
Orifice assembly
1)
R134a
Orifice assembly
R407C
Orifice assembly
Valve type
Rated capacity
Range N:
–40 to 10°C
kW 1)
Orifice no.
Code no. 2)
067B2089
TEZ 5-3.2
21.3
01
067B2089
067B2090
TEZ 5-5.0
29.1
02
067B2090
03
067B2091
TEZ 5-8.0
41.9
03
067B2091
23.7
04
067B2092
TEZ 5-13
59.7
04
067B2092
14.8
11.6
01
067B2005
TEZ 12-5.0
28.9
01
067B2005
TES 12-6.8
23.9
18.9
02
067B2006
TEZ 12-8.0
46.9
02
067B2006
TES 12-10.0
35.2
27.7
03
067B2007
TEZ 12-13
69.1
03
067B2007
TES 12-13.4
47.1
37.5
04
067B2008
TEZ 12-19.5
91.2
04
067B2008
TES 20-16.5
59.0
41.0
01
067B2175
TEZ 20-32.5
116.0
01
067B2172
TES 55-37.0
130.0
95.0
01
067G2011
TEZ 55-54
259.0
01
067G2005
TES 55-56.0
197.0
144.0
02
067G2012
TEZ 55-92
385.0
02
067G2006
The rated capacity is based on:
Evaporating temperature te = +5°C for range N and te = –30°C for range B,
Condensing temperature tc = +32°C
Refrigerant temperature ahead of valve tl = +28°C
Code numbers in bold are normally on stock and a shorter delivery time can therefore
be expected.
When the subcooling ≠ 4 K then:
1. Table value x Factor = Plant capacity
2. Plant capacity / Factor = Table value
Example:
Refrigerant = R404A
Qnom = 10 kW
te = –10°C
tc = 45°C
Δtsub = 25 K
Selection:
1. TE5, Orifice 03 = 15.3 kW x 1.46 = 22.34 kW → Valve too large
+
Thermostatic element
+
Orifice
Valve body
Right selection:
2. 10 kW / 1.46 = 6.85 kW → TE5, Orifice 01
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – TE5-55
11
Capacities
Valve
type /
Orifice
TE5 / 01
TE5 / 02
TE5 / 03
TE5 / 04
TE12 / 01
TE12 / 02
TE12 / 03
TE12 / 04
TE20 / 01
TE55 / 01
TE55 / 02
TE5 / 01
TE5 / 02
TE5 / 03
TE5 / 04
TE12 / 01
TE12 / 02
TE12 / 03
TE12 / 04
TE20 / 01
TE55 / 01
TE55 / 02
TE5 / 01
TE5 / 02
TE5 / 03
TE5 / 04
TE12 / 01
TE12 / 02
TE12 / 03
TE12 / 04
TE20 / 01
TE55 / 01
TE55 / 02
TE5 / 01
TE5 / 02
TE5 / 03
TE5 / 04
TE12 / 01
TE12 / 02
TE12 / 03
TE12 / 04
TE20 / 01
TE55 / 01
TE55 / 02
Cond.
temp.3)
[°C]
–35
9.9
13.9
21
29
14.8
25 24
35
47
60
128
196
10.5
14.8
22
32
15.7
35 26
38
52
65
135
208
10.9
15.4
24
34
16.2
45 27
40
55
69
139
215
11.0
15.6
24
34
16.3
55 27
41
57
70
138
215
R22
R134a
R404A/R507
R407C
Capacity in [kW]
Evaporating temp. [°C]
–30
–10
0
11.1 17.3 18.4
15.6
24
25
23
34
36
33
49
52
16.3
23
24
27
37
39
39
54
57
52
72
75
67
90
96
142
198
212
218
298
318
12.0 19.0
21
16.7
26
28
25
38
41
36
54
59
17.5
25
27
29
40
44
42
59
65
57
79
86
72
99
109
151
217
242
232
327
362
12.5
20
22
17.5
27
30
27
40
44
38
57
63
18.2
26
29
30
43
48
44
63
70
60
85
93
76
105
118
156
229
260
240
345
388
12.7
21
23
17.8
28
32
27
41
46
39
59
65
18.4
27
31
30
44
49
45
65
72
63
88
96
78
109
122
156
233
268
242
352
399
Capacity in [kW]
Evaporating temp. [°C]
–10
–5
0
9.3
10.1 10.9
13.9 15.2 16.2
20
22
24
29
32
34
12.7 13.6 14.3
21
22
23
30
32
34
40
43
45
50
54
57
110
119
125
169
182
192
10.1 11.2 12.3
15.2 16.8 18.3
22
25
27
32
35
38
13.9 15.2 16.3
23
25
27
33
36
39
44
48
52
55
60
64
121
132
142
184
201
216
10.5 11.8 13.1
15.9 17.7 19.5
24
26
29
34
37
41
14.6 16.0 17.5
24
26
28
35
38
42
47
51
56
58
63
69
126
139
152
192
211
229
10.6 12.0 13.4
15.9 17.9 19.9
24
27
29
34
38
42
14.8 16.4 18.0
24
27
29
35
39
43
48
53
57
59
65
71
126
140
155
192
213
234
Capacity in [kW]
Evaporating temp. [°C]
–35
–30
–10
6.5
7.4
12.2
9.1
10.5 16.7
14.0 15.9
25
19.9
23
35
8.6
9.6
14.0
14.1 15.8
23
21
23
33
29
32
45
35
39
55
72
82
121
112
127
184
6.3
7.4
12.5
9.0
10.4 17.2
14.0 16.0
26
20.0
23
37
8.3
9.4
14.5
13.8 15.7
23
21
24
35
30
33
47
35
40
57
69
80
124
108
124
189
5.9
6.9
12.4
8.3
9.8
16.9
13.3 15.3
25
19.0
22
36
7.2
8.4
14.0
12.8 14.7
23
20.0
23
34
29
32
47
34
38
57
63
74
121
99
115
184
5.0
6.1
11.7
7.2
8.7
16.1
11.9 14.0
24
17.0
20
35
5.4
6.6
12.6
11.1 13.1
22
18.0
21
33
27
30
45
30
35
54
53
64
113
85
101
172
Capacity in [kW]
Evaporating temp. [°C]
-5
0
5
19.6
20
20
27
28
27
39
40
40
55
57
57
25
26
27
41
43
43
61
63
63
81
83
84
102
106
108
224
234
241
336
351
360
21
22
22
28
30
30
41
43
43
59
61
62
27
29
29
44
46
47
65
68
69
86
90
92
108
114
119
237
252
264
356
377
393
21
22
23
29
30
31
42
44
44
60
62
63
28
29
30
45
47
49
66
69
72
88
92
95
110
116
122
239
256
272
359
382
403
21
22
22
28
30
30
41
43
43
58
61
62
27
29
30
43
46
48
64
68
71
86
90
93
107
114
120
232
250
267
347
371
393
5
17.7
24
35
50
23
38
55
73
95
211
317
21
28
41
58
28
45
65
87
112
249
372
23
31
44
63
30
49
72
95
122
272
404
24
32
46
66
32
51
75
99
128
283
419
–30
5.7
8.6
12.6
18.0
8.5
13.9
20
27
33
73
113
6.0
9.2
13.6
19.4
9.0
14.8
22
29
36
77
119
6.1
9.4
14.1
20
9.2
15.1
22
30
37
77
120
5.9
9.1
14.2
20
9.1
14.7
22
31
37
74
117
5
11.4
16.9
25
35
14.7
24
35
47
58
128
197
13.3
19.7
28
41
17.3
28
41
55
68
151
229
14.3
21
31
44
18.8
31
45
60
74
164
247
14.8
22
32
45
19.5
32
46
62
76
169
254
–40
5.8
8.1
12.6
17.9
7.7
12.3
18.4
26
31
62
97
5.6
7.9
12.5
17.8
7.3
12.0
18.4
26
31
59
93
5.1
7.2
11.8
16.8
6.2
11.0
17.4
26
29
53
83
4.2
6.1
10.4
14.8
4.4
9.3
15.5
24
26
43
69
0
13.7
18.6
27
39
15.6
25
37
49
61
136
206
14.6
19.8
29
41
17.0
27
40
53
66
145
219
14.7
19.9
29
42
17.0
27
40
55
67
146
220
14.2
19.3
28
41
15.9
26
39
53
64
140
210
-10
18.4
25
37
52
24
39
57
77
96
210
317
19.3
26
39
55
25
41
61
81
101
220
332
19.5
27
39
56
26
41
61
83
102
221
333
19.1
26
38
55
25
40
60
81
100
213
320
10
18.9
26
38
53
26
42
61
81
108
240
358
21
29
42
60
30
48
70
91
122
272
404
22
30
43
62
31
50
73
95
127
284
419
22
30
42
61
31
50
72
94
126
281
412
3) Condensing temperature at bubble point.
Correction factor
Refrigerant
R22
R134a
R404A/R507
R407C
2
0.98
0.98
0.96
0.97
4
1
1
1
1
10
1.06
1.08
1.10
1.08
15
1.11
1.13
1.20
1.14
20
1.15
1.19
1.29
1.21
Subcooling [K]
25
1.20
1.25
1.37
1.27
30
1.25
1.31
1.46
1.33
35
1.30
1.37
1.54
1.39
40
1.35
1.42
1.63
1.45
45
1.39
1.48
1.70
1.51
50
1.44
1.54
1.78
1.57
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
12
Technical data and ordering: TE5-55
R22, R134a, R404A/R507, R407C
Thermostatic element, without orifice and filter, with bulb strap
Refrigerant
R22
R134a
R404A/R507
R407C
Pressure
Valve type equalization
Capillary
tube
Code no. 2)
Range N
–40 to +10°C
Range NM
–40 to –5°C
Range NL
–40 to –15°C
Range B
–60 to –25°C
¼ in. / 6 mm
m
Without MOP
MOP+15°C
MOP 0°C
MOP –10°C
Without MOP
MOP –20°C
TEX 5
Ext. 4)
3
067B3250
067B3267
067B3249
067B3253
067B3263
067B3251
TEX 12
Ext. 5)
3
067B3210
067B3227
067B3207
067B3213
067B3211
TEX 12
Ext. 5)
5
067B3209
TEX 20
Ext. 5)
3
067B3274
067B3286
067B3273
067B3275
067B3276
TEX 20
Ext. 5)
5
067B3290
TEX 55
Ext. 5)
3
067G3205
067G3220
067G3206
TEX 55
Ext. 5)
5
067G3209
TEN 5
Ext. 4)
3
067B3297
067B3298
067B3360
TEN 12
Ext. 5)
3
067B3232
067B3233
TEN 12
Ext. 5)
5
067B3363
TEN 20
Ext. 5)
3
067B3292
TEN 20
Ext. 5)
5
067B3370
TEN 55
Ext. 5)
3
067G3222
TEN 55
Ext. 5)
5
067G3230
TES 5
Ext. 4)
3
067B3342
067B3357
067B3358
TES 12
Ext. 5)
3
067B3347
067B3345
067B3348
067B3349
TES 12
Ext. 5)
5
067B3346
TES 20
Ext. 5)
3
067B3352
067B3351
067B3353
067B3354
TES 20
Ext. 5)
5
067B3356
TES 55
Ext. 5)
3
067G3302
067G3303
067G3304
067G3305
067B3212
067B3287
067G3207
067G3217
067B3293
067G3223
067B3344
067B3343
067B3350
067B3355
TES 55
Ext. 5)
5
067G3301
TEZ 5
Ext. 4)
3
067B3278
067B3277
TEZ 12
Ext. 5)
3
067B3366
067B3367
TEZ 20
Ext. 5)
3
067B3371
067B3372
TEZ 55
Ext. 5)
3
067G3240
067G3241
067G3306
Valve body
Orifice no. 6)
Type
Connection
Inlet × Outlet
in.
TE 5
01 - 03
03
04
TE 5
01- 03
03
04
TE 12
01 - 02
03 - 04
03 - 04
TE 12
01 - 02
03 - 04
03 - 04
TE 20
01
01
7/8 × 11/8
TE 55
01- 02
01- 02
11/8 × 13/8
mm
½ × 5/8
½ × 7/8
5/8 × 7/8
12 × 16
12 × 22
16 × 22
5/8 × 7/8
7/8 × 1
7/8 × 11/8
Code no. 2)
Flare
angleway
Solder
angleway
Solder
straightway
067B4013
067B4009
067B4010
067B4011
067B4007
067B4008
067B4013
067B4004
067B4005
067B4012
067B4002
067B4003
067B4022 7)
067B4020 7)
067B4023 8)
067B4021 8)
067B4018 7)
16 × 22
22 × 25
22 × 28
067B4017 8)
067B4016 8)
22 × 28
067B4023 8)
067B4017 8)
067B4021 8)
067B4016 8)
28 × 35
067G4004 9)
067G4002 9)
067G4003 9)
067G4001 9)
Solder
flanges
067B4025 7)
067B4026 7)
067B4027 7)
067B4015 7)
4)
Pressure equalization with solder connector can be supplied on contacting Danfoss.
Available as accessory: solder adaptor for TE 12, TE 20 and TE 55. Code no. 068B0170.
6)
Suggested orifice/valve body combination.
7)
ODF × ODF
8)
ODF × ODM
9)
ODM × ODM
ODF = Internal diameter
ODM = External diameter
5)
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – TE5-55
13
TU / TC: superior by design and function
The function of a thermostatic expansion valve is determined by three fundamental pressures: the bulb
pressure, the evaporating pressure and the spring pressure. When the expansion valve regulates, balance
is created between bulb pressure on one side of the diaphragm and evaporating pressure plus spring
force on the other side. The spring is used to set superheat.
Features
Capillary tube in stainless steel
Bulb in stainless steel
Laser-engraved inscription
Laser welded stainless steel
thermostatic element for
unsurpassed joint strength
and operational lifetime
Bi-metal connections
Stainless steel with rolled on
copper cladding for safe, fast and
convenient copper-to-copper
soldering
Separate strainer, mounted on
the orifice assembly for easy
maintenance and cleaning
Orifice assembly with an
unmatched hermetic seal
Applications
Advantages
Facts
· Traditional refrigeration
· The use of stainless steel makes the
valves light and strong.
· Can be supplied with MOP
(Max. Operating Pressure)
Protects the compressor motor
against excessive evaporating pressure during normal operation.
· Heat pump systems
· Air conditioning units
· Liquid coolers
· Ice cube machines
· Stainless steel capillary tube for superior strength and ductility.
· Allen key superheat setting screw
is convenient and space-saving
compared to the standard screwdriver
adjustment used in most conventional
valves.
· Valves for special temperature ranges
can be supplied.
· Only 4 K opening superheat.
· Bi-flow function.
G R U P A
· Transport refrigeration
· Bi-metal connections for safe, fast and
convenient soldering.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
14
Technical data and ordering: TUA / TUAE
Thermostatic element, without orifice and filter, with bulb strap 1)
Refrigerant
Type
Pressure
equalization
TUA
TUA
TUA
TUA
Int.
Int.
Int.
Int.
TUAE
TUAE
TUAE
TUAE
Ext. 1/4 in.
Ext. 6 mm
Ext. 1/4 in.
Ext. 6 mm
TUA
TUA
TUA
TUA
Int.
Int.
Int.
Int.
R134a
TUAE
TUAE
TUAE
TUAE
Ext. 1/4 in.
Ext. 6 mm
Ext. 1/4 in.
Ext. 6 mm
TUA
TUA
TUA
TUA
Int.
Int.
Int.
Int.
R404A/R507
TUAE
TUAE
TUAE
TUAE
Ext. 1/4 in.
Ext. 6 mm
Ext. 1/4 in.
Ext. 6 mm
TUA
TUA
TUA
TUA
Int.
Int.
Int.
Int.
R407C
TUAE
TUAE
TUAE
TUAE
Ext. 1/4 in.
Ext. 6 mm
Ext. 1/4 in.
Ext. 6 mm
R410A
Code no. 2)
Connections
Inlet × outlet
in.
R22
R22, R134a, R404A/R507, R407C, R410A
Range N
–40 to +10°C
mm
/4 × 1/2
Without MOP
MOP +15°C
068U2234
068U2230
068U2235
068U2231
068U2242
068U2238
068U2243
068U2239
Without MOP
MOP –20°C
068U2236
068U2232
068U2237
068U2233
068U2244
068U2240
068U2245
068U2241
068U2204
068U2200
068U2205
068U2201
068U2212
068U2208
068U2213
068U2209
068U2206
068U2202
068U2207
068U2203
068U2214
068U2210
068U2215
068U2211
068U2284
068U2280
068U2285
068U2281
068U2292
068U2288
068U2293
068U2289
068U2300
068U2296
068U2301
068U2297
068U2308
068U2304
068U2309
068U2305
068U2316
068U2312
068U2317
068U2313
068U2286
068U2282
068U2287
068U2283
068U2294
068U2290
068U2295
068U2291
068U2302
068U2298
068U2303
068U2299
068U2310
068U2306
068U2311
068U2307
068U2318
068U2314
068U2319
068U2315
068U2324
068U2320
068U2325
068U2321
068U2332
068U2328
068U2333
068U2329
068U2326
068U2322
068U2327
068U2323
068U2334
068U2330
068U2335
068U2331
6 × 12
/8 × 1/2
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × /2
1
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × /2
1
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × /2
1
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × /2
1
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × /2
1
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × /2
1
10 × 12
/4 × 1/2
1
3
6 × 12
/8 × 1/2
10 × 12
/8 × 1/2
TUA
3
TUAE
TUAE
3
Range B
–60 to –25°C
MOP 0°C
1
3
Range NM
–40 to –5°C
068U2414
/8 × 1/2
068U1714
068U2780
10 × 12
068U2450
Orifice assembly with filter and gasket
Range N: –40 to +10°C
Orifice
no.
1)
2)
3)
Rated capacity in kW 3)
R22
R134a
R404A
R507
R407C
0
0.60
0.47
0.45
1
0.9
0.7
0.66
2
1.3
1.0
3
1.8
4
Range B: –60 to –25°C
Rated capacity in kW 3)
Rated capacity in tons (TR)
R410A
R22
R134a
R404A
R507
R407C
0.63
-
0.17
0.13
0.13
0.92
1.3
0.25
0.19
0.19
1.0
1.4
2.1
0.36
0.28
1.4
1.3
1.9
2.9
0.50
2.6
2.1
2.0
2.8
4.5
5
3.5
2.7
2.7
3.8
6
5.3
4.1
4.0
7
7.0
5.5
8
11.0
9
16.0
Rated capacity in tons (TR)
Code no. 2)
R410A
R22
R404A
R507
R407C
R22
R404A
R507
R407C
0.18
-
0.52
0.36
0.46
0.15
0.10
0.13
068U1030
0.26
0.4
0.68
0.50
0.58
0.19
0.14
0.16
068U1031
0.27
0.38
0.6
0.85
0.64
0.70
0.24
0.18
0.20
068U1032
0.39
0.38
0.53
0.8
1.2
0.89
1.0
0.34
0.25
0.28
068U1033
0.75
0.59
0.57
0.80
1.3
1.8
1.3
1.4
0.50
0.37
0.41
068U1034
5.9
1.00
0.78
0.76
1.1
1.7
2.3
1.8
1.9
0.66
0.50
0.55
068U1035
5.7
9.0
1.5
1.2
1.1
1.6
2.5
3.5
2.7
2.9
1.0
0.75
0.82
068U1036
5.3
7.5
12.0
2.0
1.6
1.5
2.1
3.4
4.7
3.5
3.9
1.3
1.0
1.1
068U1037
8.2
8.0
11.0
18.0
3.0
2.3
2.3
3.2
5.0
7.1
5.3
5.8
2.0
1.5
1.6
068U1038
12.0
12.0
17.0
26.0
4.5
3.5
3.5
4.8
7.5
10.4
7.8
8.5
2.9
2.2
2.4
068U1039
Capillary tube length 1.5 m.
Code numbers in bold are normally on stock and a shorter delivery time can therefore be expected.
The rated capacity is based on: Evaporating temperature te = +5°C for range N and te = –30°C for range B,
condensing temperature tc = +32°C, refrigerant temperature ahead of valve tl = +28°C, and opening superheat OS = 4 K.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – TUA, TUAE and TCAE
15
Technical data and ordering: TCAE
Thermostatic element, without orifice and filter, with bulb strap 4)
Refrigerant
Type
TCAE
ext.
3
/4 in.
1
Without MOP
With MOP
MOP 0°C
068U4280
068U4282
068U4288
068U4281
068U4283
068U4289
10 × 16
068U4284
068U4286
068U4290
TCAE
6 mm
12 × 16
068U4285
068U4287
068U4291
TCAE
ext.
3
068U4292
068U4294
068U4300
/4 in.
1
/8 × 5/8
/2 × 5/8
1
Range B
–60 to –25°C
Without MOP
With MOP
068U4293
068U4295
068U4301
TCAE
ext.
10 × 16
068U4296
068U4298
068U4302
TCAE
6 mm
12 × 16
068U4297
068U4299
068U4303
TCAE
ext.
3
/8 × 5/8
068U4304
068U4306
068U4312
068U4316
068U4318
/4 in.
1
/2 × 5/8
068U4305
068U4307
068U4313
068U4317
068U4319
1
TCAE
ext.
10 × 16
068U4308
068U4310
068U4314
068U4320
068U4322
TCAE
6 mm
12 × 16
068U4309
068U4311
068U4315
068U4321
068U4323
TCAE
ext.
3
068U4324
068U4326
068U4332
/4 in.
1
/8 × 5/8
/2 × 5/8
1
TCAE
068U4325
068U4327
068U4333
ext.
10 × 16
068U4328
068U4330
068U4334
/4 in.
12 × 16
068U4329
068U4331
068U4335
068U4336
068U4338
068U4344
TCAE
1
TCAE
/8 × 5/8
ext.
3
/4 in.
1
TCAE
/2 × 5/8
1
068U4337
068U4339
068U4345
TCAE
ext.
10 × 16
068U4340
068U4342
068U4346
TCAE
6 mm
12 × 16
068U4341
068U4343
068U4347
TCAE
R410A
/2 × 5/8
Range NM
–40 to –5°C
ext.
TCAE
R407C
mm
/8 × 5/8
1
TCAE
R404A/R507
Range N
–40 to +10°C
TCAE
TCAE
R134a
Code no.
Connection
Inlet × outlet
Pressure
equalization
in.
R22
R22, R134a, R404A/R507, R407C, R410A
Orifice assembly with filter and gasket
Range N: –40 to +10°C
Orifice
no.
5)
6)
Rated capacity in tons (TR)
R407C
R407C
Code no.
01
17.5
12.0
R404A
R507
13.5
19.0
23.0
5.0
3.5
R404A
R507
3.8
5.4
6.5
02
21.0
14.5
16.0
23.0
27.5
6.0
4.1
4.5
6.5
7.8
068U4101
068U4098
03 6)
26.5
18.0
20.0
28.5
34.0
7.5
5.2
5.7
8.1
9.8
068U4102
068U4099
R22
4)
Rated capacity in kW 5)
R134a
R410A
R22
R134a
R410A
Without
bleed
068U4100
With
15% bleed
068U4097
Capillary tube length 1.5 m.
The rated capacity is based on: Evaporating temperature te = +5°C, condensing temperature tc = +32°C,
refrigerant temperature ahead of valve tl = +28°C, and opening superheat OS = 4 K.
TCAE with orifice no. 3 cannot be used for biflow operation.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
16
Capacities
Valve
type/
Orifice
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
Cond.
temp. 7)
[°C]
–35
0.38
0.44
0.51
0.73
1.1
1.4
2.1
25
2.8
4.2
6.2
9.7
11.5
14.9
0.40
0.46
0.53
0.75
1.1
1.5
35 2.2
2.9
4.4
6.5
10.3
12.2
15.9
0.40
0.47
0.54
0.75
1.1
1.5
2.2
45
3.0
4.5
6.6
10.5
12.6
16.6
0.41
0.47
0.53
0.73
1.1
1.5
2.2
55
2.9
4.4
6.5
10.6
12.8
17.1
R22
R134a
R404A/R507
R407C
Capacity in [kW]
Evaporating temp. [°C]
–30
–10
0
0.41 0.53 0.55
0.50 0.72 0.79
0.59 0.94
1.1
0.84
1.3
1.5
1.2
1.9
2.2
1.6
2.6
3.0
2.4
3.9
4.5
3.2
5.2
6.0
4.9
7.8
9.0
7.1
11.6 13.4
10.9 14.9 15.7
12.9 17.7 18.9
16.6 22.4 23.6
0.44 0.57 0.61
0.53 0.78 0.88
0.62
1.0
1.2
0.88
1.4
1.7
1.3
2.1
2.6
1.7
2.8
3.4
2.6
4.2
5.1
3.4
5.7
6.9
5.1
8.5
10.2
7.5
12.6 15.3
11.5 16.3 17.9
13.7 19.5 21.5
17.8 24.7 26.9
0.45 0.60 0.65
0.54 0.82 0.94
0.63
1.1
1.3
0.89
1.5
1.8
1.3
2.2
2.8
1.7
3.0
3.7
2.6
4.5
5.5
3.5
6.0
7.4
5.3
9.0
11.1
7.7
13.3 16.5
11.9 17.2 19.3
14.2 20.7 23.3
18.7 26.4 29.3
0.45 0.62 0.68
0.54 0.84 0.98
0.63
1.1
1.4
0.88
1.6
1.9
1.3
2.3
2.9
1.7
3.1
3.8
2.6
4.7
5.8
3.5
6.2
7.7
5.2
9.2
11.5
7.7
13.7 17.2
12.1 17.8 20.2
14.5 21.6 24.5
19.3 27.6 30.9
Capacity in [kW]
Evaporating temp. [°C]
–10
–5
0
0.38 0.40 0.41
0.52 0.57 0.60
0.67 0.75 0.83
0.94
1.0
1.1
1.4
1.6
1.7
1.9
2.1
2.3
2.8
3.1
3.5
3.7
4.2
4.6
5.6
6.3
6.9
8.2
9.3
10.2
8.9
9.5
9.9
11.1 11.9 12.5
14.5 15.5 16.1
0.41 0.44 0.46
0.56 0.62 0.66
0.72 0.83 0.94
1.0
1.2
1.3
1.5
1.7
1.9
2.0
2.3
2.6
3.0
3.5
3.9
4.0
4.6
5.2
6.1
6.9
7.8
8.9
10.2 11.5
9.7
10.5 11.2
12.2 13.2 14.1
15.9 17.1 18.2
0.43 0.46 0.48
0.58 0.64 0.70
0.75 0.87 0.99
1.1
1.2
1.4
1.6
1.8
2.1
2.1
2.4
2.8
3.1
3.6
4.1
4.2
4.9
5.5
6.3
7.3
8.3
9.3
10.8 12.3
10.1 11.1 11.9
12.8 14.0 15.2
16.8 18.2 19.6
0.43 0.46 0.49
0.58 0.65 0.71
0.75 0.87
1.0
1.1
1.3
1.4
1.6
1.8
2.1
2.1
2.4
2.8
3.2
3.7
4.3
4.2
4.9
5.7
6.3
7.4
8.5
9.3
10.9 12.5
10.3 11.3 12.3
13.1 14.4 15.7
17.2 18.8 20.3
Capacity in [kW]
Evaporating temp. [°C]
–35
–30
–10
0.28 0.31 0.40
0.33 0.38 0.56
0.4
0.5
0.7
0.5
0.6
1.1
0.8
0.9
1.6
1.1
1.3
2.1
1.6
1.9
3.1
2.1
2.5
4.2
3.3
3.8
6.3
4.8
5.6
9.3
6.6
7.4
10.4
8.2
9.3
13.2
10.9 12.2 16.9
0.27 0.30 0.40
0.32 0.37 0.57
0.4
0.4
0.8
0.5
0.6
1.1
0.8
0.9
1.6
1.0
1.2
2.1
1.5
1.8
3.2
2.1
2.4
4.3
3.1
3.7
6.3
4.5
5.3
9.4
6.3
7.2
10.6
7.9
9.1
13.4
10.6 12.0 17.3
0.24 0.27 0.38
0.28 0.34 0.54
0.3
0.4
0.7
0.4
0.5
1.0
0.7
0.8
1.5
0.9
1.1
2.0
1.4
1.7
3.0
1.8
2.2
4.1
2.8
3.3
6.1
3.9
4.8
9.0
5.7
6.6
10.2
7.2
8.4
12.9
9.9
11.3 16.8
0.20 0.24 0.35
0.23 0.28 0.48
0.3
0.3
0.7
0.3
0.4
0.9
0.5
0.6
1.4
0.7
0.9
1.8
1.1
1.4
2.8
1.5
1.8
3.7
2.2
2.8
5.5
3.0
3.8
8.1
4.7
5.6
9.3
6.1
7.3
11.9
8.6
10.0 15.6
Capacity in [kW]
Evaporating temp. [°C]
–5
0
5
0.58 0.61 0.61
0.80 0.85 0.88
1.1
1.2
1.3
1.5
1.6
1.7
2.2
2.4
2.6
3.0
3.2
3.5
4.4
4.9
5.3
5.9
6.5
7.0
8.9
9.7
10.5
13.2 14.5 15.6
15.6 16.2 16.7
19.6 20.5 21.0
25.1 26.1 26.6
0.61 0.64 0.66
0.84 0.90 0.94
1.1
1.3
1.4
1.6
1.8
1.9
2.4
2.6
2.9
3.1
3.5
3.8
4.7
5.2
5.8
6.3
7.0
7.7
9.4
10.5 11.5
13.9 15.5 17.1
16.5 17.4 18.2
20.9 22.1 23.1
26.8 28.2 29.3
0.61 0.65 0.67
0.84 0.91 0.96
1.2
1.3
1.4
1.6
1.8
2.0
2.4
2.7
3.0
3.2
3.6
4.0
4.8
5.4
6.0
6.4
7.2
8.0
9.6
10.7 11.9
14.1 15.9 17.8
16.8 17.9 18.9
21.4 22.8 24.1
27.6 29.3 30.7
0.59 0.63 0.66
0.82 0.89 0.95
1.1
1.3
1.5
1.6
1.8
2.0
2.4
2.7
3.0
3.1
3.6
4.0
4.8
5.4
6.1
6.2
7.1
8.0
9.4
10.7 12.0
13.9 15.8 17.8
16.6 17.9 19.0
21.3 22.9 24.3
27.8 29.6 31.1
5
0.54
0.79
1.1
1.5
2.3
3.1
4.7
6.3
9.3
14.0
15.6
18.8
23.4
0.62
0.91
1.3
1.8
2.8
3.7
5.5
7.4
11.0
16.4
18.3
22.1
27.5
0.67
0.98
1.5
2.0
3.0
4.0
6.1
8.1
12.1
18.0
20.1
24.3
30.3
0.70
1.0
1.6
2.1
3.2
4.3
6.4
8.5
12.7
19.0
21.2
25.8
32.2
–30
0.27
0.31
0.35
0.49
0.72
0.99
1.4
1.9
2.9
4.3
5.9
7.2
9.6
0.28
0.32
0.37
0.52
0.76
1.0
1.5
2.1
3.1
4.5
6.2
7.7
10.2
0.28
0.32
0.37
0.52
0.77
1.0
1.5
2.1
3.1
4.5
6.3
7.9
10.6
0.27
0.31
0.37
0.50
0.75
0.96
1.4
2.0
3.0
4.3
6.2
7.9
10.7
5
0.42
0.62
0.89
1.2
1.8
2.4
3.7
4.9
7.3
10.9
10.1
12.7
16.3
0.47
0.70
1.0
1.4
2.1
2.9
4.3
5.8
8.5
12.8
11.7
14.8
19.0
0.51
0.75
1.1
1.5
2.3
3.1
4.7
6.2
9.3
13.8
12.7
16.2
20.7
0.52
0.77
1.2
1.6
2.4
3.2
4.9
6.4
9.6
14.3
13.2
16.8
21.7
–40
0.25
0.28
0.33
0.5
0.7
0.9
1.4
1.8
2.8
4.0
5.8
7.2
9.6
0.24
0.26
0.3
0.4
0.6
0.9
1.3
1.7
2.6
3.7
5.4
6.9
9.3
0.21
0.23
0.3
0.4
0.5
0.7
1.1
1.5
2.3
3.1
4.8
6.2
8.5
0.17
0.18
0.20
0.2
0.4
0.5
0.9
1.1
1.8
2.2
3.8
5.1
7.2
0
0.43
0.62
0.9
1.2
1.8
2.5
3.7
4.9
7.3
11.0
11.3
14.3
18.2
0.44
0.64
0.9
1.3
1.9
2.6
3.9
5.2
7.7
11.6
11.9
15.1
19.2
0.43
0.6
0.9
1.3
1.9
2.6
3.8
5.1
7.6
11.4
11.7
14.9
19.0
0.39
0.6
0.9
1.2
1.8
2.4
3.6
4.8
7.1
10.5
10.9
14.0
17.9
–10
0.54
0.75
0.96
1.3
2.0
2.7
4.0
5.3
8.0
11.8
14.7
18.5
23.8
0.56
0.77
1.0
1.4
2.1
2.8
4.2
5.6
8.4
12.4
15.4
19.4
25.1
0.56
0.77
1.0
1.4
2.1
2.8
4.2
5.6
8.4
12.4
15.6
19.8
25.8
0.54
0.75
1.00
1.4
2.1
2.7
4.2
5.4
8.2
12.1
15.3
19.6
25.8
10
0.58
0.89
1.3
1.8
2.8
3.7
5.6
7.4
11.0
16.5
16.7
21.0
26.4
0.65
0.98
1.5
2.1
3.1
4.2
6.3
8.4
12.4
18.6
18.8
23.8
29.9
0.68
1.0
1.6
2.2
3.3
4.4
6.6
8.9
13.1
19.6
19.8
25.2
31.7
0.67
1.0
1.6
2.2
3.3
4.5
6.8
9.0
13.3
19.9
20.1
25.6
32.4
7) Condensing temperature at bubble point.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – TUA, TUAE and TCAE
17
Capacities
R410A
Valve
type/
Orifice
Cond.
temp. 7)
[°C]
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
TU / 00
TU / 01
TU / 02
TU / 03
TU / 04
TU / 05
TU / 06
TU / 07
TU / 08
TU / 09
TC / 01
TC / 02
TC / 03
25
35
45
55
–10
0.77
1.11
1.60
2.2
3.3
4.4
6.7
8.9
13.3
19.9
17.3
21.9
28.4
0.80
1.16
1.7
2.4
3.6
4.7
7.1
9.5
14.2
21.1
18.5
23.5
30.4
0.80
1.17
1.7
2.4
3.6
4.8
7.2
9.6
14.3
21.3
18.8
23.9
31.1
0.77
1.12
1.67
2.3
3.4
4.7
6.9
9.2
13.8
20.5
18.3
23.3
30.5
Capacity in [kW]
Evaporating temp. [°C]
–5
0
5
0.78 0.78 0.76
1.15 1.17 1.16
1.7
1.8
1.9
2.4
2.6
2.6
3.6
3.9
4.0
4.8
5.1
5.3
7.3
7.8
8.1
9.7
10.3 10.7
14.5 15.3 15.8
21.6 23.0 23.9
18.2 18.7 18.7
23.0 23.7 23.7
29.6 30.3 30.2
0.83 0.84 0.85
1.22 1.27 1.30
1.9
2.0
2.2
2.6
2.8
3.0
3.9
4.3
4.6
5.2
5.7
6.1
7.9
8.6
9.2
10.5 11.4 12.2
15.6 16.9 18.0
23.3 25.4 27.1
19.7 20.7 21.3
25.0 26.2 27.1
32.2 33.6 34.5
0.83 0.86 0.87
1.23 1.29 1.34
1.9
2.1
2.3
2.7
2.9
3.1
4.0
4.4
4.8
5.3
5.8
6.3
8.0
8.9
9.6
10.7 11.7 12.8
15.9 17.4 18.8
23.7 26.1 28.3
20.1 21.4 22.4
25.6 27.2 28.5
33.1 34.9 36.3
0.80 0.83 0.85
1.19 1.26 1.31
1.9
2.1
2.2
2.6
2.9
3.1
3.9
4.3
4.7
5.2
5.7
6.3
7.8
8.7
9.5
10.4 11.5 12.6
15.5 17.1 18.6
23.0 25.5 28.0
19.7 21.0 22.2
25.2 26.9 28.4
32.6 34.5 36.1
When the subcooling ≠ 4 K then:
1. Table value x Factor = Plant capacity
2. Plant capacity / Factor = Table value
10
0.71
1.11
1.9
2.6
4.0
5.3
8.0
10.7
15.7
23.7
17.9
22.8
28.8
0.83
1.30
2.3
3.1
4.8
6.3
9.7
12.9
18.8
28.5
21.6
27.5
34.8
0.87
1.4
2.4
3.3
5.1
6.8
10.3
13.7
20.1
30.3
23.1
29.5
37.2
0.86
1.3
2.4
3.3
5.1
6.8
10.4
13.7
20.1
30.3
23.2
29.7
37.4
Example:
Qnom = 10 kW
te = –10°C
tc = 55°C
Δtsub = 25 K
Selection:
1. TC, Orifice 01 = 10.3 kW x 1.25 = 12.9 kW → Valve too large
Right selection:
2. 10 kW / 1.25 = 8 kW → TU, Orifice 09
TUAE
Thermostatic
Capacity range
Orifice / Superheat
Ext. equalization
A
B
C
Orifice / Superheat
Exchangeable
Adjustable
Yes
YES
NO
YES
NO
NO
N = –40°C → +10°C
NM = –40°C → –5°C with MOP
NL = –40°C → –15°C with MOP
B = –60°C → –25°C with MOP
TUA(E)
TCAE
+
Orifice
Thermostatic
valve
TUB(E)
TUC(E)
TCBE
TCCE
or
Thermostatic valve incl. orifice
Valve types TUB(E)/TUC(E) and TCBE/TCCE can be
replaced by TUA(E) and TCAE types
Correction factor
R22
R134a
R404A / R507
R407C
R410A
2
0.98
0.98
0.96
0.97
0.97
4
1
1
1
1
1
10
1.06
1.08
1.10
1.08
1.08
15
1.11
1.13
1.20
1.14
1.15
20
1.15
1.19
1.29
1.21
1.21
Subcooling [K]
25
1.20
1.25
1.37
1.27
1.27
30
1.25
1.31
1.46
1.33
1.33
35
1.30
1.37
1.54
1.39
1.39
40
1.35
1.42
1.63
1.45
1.45
45
1.39
1.48
1.70
1.51
1.50
G R U P A
Refrigerant
50
1.44
1.54
1.78
1.57
1.56
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
18
The complete Danfoss program of thermostatic expansion valves:
Rated capacities in kW for range N
Type
R134a
R404A / R507
R407C
R410A
0.5 - 15.5
0.4 - 10.5
0.38 - 9.1
0.5 - 16.7
-
TUA and TUAE 1)
0.6 - 16
0.45 - 12
0.45 - 12
0.63 - 17
1.3 - 26
Solder
Bi-metal (stainless steel / copper)
TUB and TUBE 2)
0.9 - 16
0.7 - 12
0.7 - 12
0.92 - 17
1.3 - 26
Solder
Bi-metal (stainless steel / copper)
17.5 - 26.5
12 - 18
13.5 - 20
19.0 - 28.5
23 - 34
Solder
Bi-metal (stainless steel / copper)
28 - 245
18 - 196
21 - 187
28 - 245
28 - 350
Solder
Bi-metal (stainless steel / copper)
19.7 - 356
12.9 - 220
13 - 197
21.3 - 385
-
105 - 1890
55 - 1083
99 - 1623
117 - 2020
-
Solder or weld flanges
10.5 - 140
5.7 - 79
8.4 - 109
10.5 - 140
-
Solder (copper)
T 2 and TE 2 1)
TCAE 1) and TCBE 2)
TRE 10 - TRE 80 2)
TE 5 - TE 55 1)
PHT
1)
TDE and TDEB 2)
1)
2)
Connections
R22
Flare x flare and flare x solder
Solder x solder (solder adaptor)
Flare / solder /solder flanges
Interchangeable orifice.
Fixed orifice.
Thermostatic expansion valves parts program:
T 2 and TE 2
+
Orifice
Thermostatic valve
TUA/TUAE and TCAE
+
Orifice
Thermostatic valve
TE 5 - TE 55
+
Thermostatic element
+
Valve body
Orifice
+
Orifice
+
Valve body
Flanges
d.o.o.
Thermostatic element
+
G R U P A
PHT
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – TUA, TUAE and TCAE
19
PHT: The parts programme make flexibility
PHT thermostatic expansion valves regulate the injection of refrigerant liquid into evaporators.
Injection is controlled by the refrigerant superheat.
Therefore the valves are especially suitable for liquid injection in ”dry“ evaporators where the superheat
at the evaporator outlet is proportional to the evaporator load.
Features
Laser welded thermostatic element
in stainless steel. Secure, stronger
diaphram and longer lifetime.
Capillary tube and sensor in
stainless steel.
Vibration proof due to the
strong capillary tube.
Easy adjustment of
superheat
Connection for
external pilot
Weld or solder flanges
Weld: 1 to 2 in.
Solder: 1 1/8 in (28 mm)
to 1 3/8 in. (35 mm)
Applications
Advantages
Facts
· Traditional refrigeration and freezing
applications
· Interchangeable orifice assembly
- easier stocking
- easy capacity matching
- better service.
· Permissible working pressure
- PHT 85 and 125: PS / MWP = 28 bar
- PHT 300: PS / MWP = 20 bar
· Water coolers and air conditioning
· Superheat
Static superheat SS can be adjusted
with setting spindle ().
· Rated capacities from 105 to 1890 kW
(30 to 540 TR) for R22
· Can be supplied with MOP
(Max. Operating Pressure)
Protects the compressor motor
against excessive evaporating pressure
· Range: –40 to +50°C
G R U P A
· Very tight main orifice
Also used as solenoid valve
(not PHT 300)
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
20
Technical data and ordering
1.
2.
3.
4.
Orifice assembly for pilot valve
Valve body, flange gaskets, flange bolts and screws
Thermostatic element (incl. accessory bag with screws)
Flange set
PHT 85
Solder or weld flanges
1. Pilot orifice assembly
Type
Code no.
PHT
067B2090
2. Valve body, flange gaskets, flange bolts and screws
Type
Orifice no.
Rated capacity 2)
R22
Range N:
–40 to +10°C
Rated capacity 1)
R134a
Range N:
–40 to +10°C
Code no.
Range A:
+10 to +50°C
TR
kW
TR
kW
TR
PHT 85
1
30
105
16
55
20
kW
69
026H1160
PHT 85
2
50
175
26
92
33
114
026H1161
PHT 85
3
80
280
39
138
52
182
026H1162
PHT 85
4
130
455
59
208
72
273
026H1163
PHT 125
1
225
790
125
438
156
545
026H1164
PHT 300
1
325
1140
178
622
221
773
026H0165
PHT 300
2
540
1890
309
1083
351
1227
026H0166
) A PHT 85 with orifice no. 5 and a capacity of +5 ©+10% compared to orifice no. 4 can be ordered. The code no. is
2
) The rated capacity for range N is based on evaporating temperature te = +5°C, condensing temperature tc = +32°C,
and refrigerant liquid temperature ahead of valve tl = +28°C.
The rated capacity for range A is based on evaporating temperature te = +5°C, condensing temperature tc = +42°C,
and refrigerant liquid temperature ahead of valve tl = +38°C.
1
026H1187.
See following pages for extended capacity tables.
3. Thermostatic element (incl. accessory bag)
Range
Refrigerant
Code no.
3 m capillary tube
–40 to +10°C
+10 to +50°C
5 m capillary tube
R22
067B3303
067B3304
R22, MOP 100 psig
067B3300
067B3306
R407C
067B3314
067B3341
R407C, MOP 95 psig
067B3311
R134a
067B3310
067B3315
R134a, MOP 55 psig
067B3316
067B3317
R404A / R507
067B3319
R134a
067B3318
4. Flange set
Valve flange
Flange type
Weld flanges
Code no.
1
027N1025
Solder flanges
in.
Code no.
mm
Code no.
PHT 85
2
PHT 85
2
11/8
027L1029
28
027L1028
PHT 85
2
13/8
027L1035
35
027L1035
PHT 125
3A
11/4
PHT 300
4A
11/2
027N1040
PHT 300
4A
2
027N1050
027N1032
G R U P A
in.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – PHT
21
Technical data and ordering
Valve type
/
Orifice
Cond.
temp.
[°C]
PHT85-1
R22
R134a
R404A / R507
R407C
Capacity in [kW]
Evaporating temp. [°C]
Capacity in [kW]
Evaporating temp. [°C]
Capacity in [kW]
Evaporating temp. [°C]
Capacity in [kW]
Evaporating temp. [°C]
-35
-30
-10
0
5
-30
-10
-5
0
5
-40
-35
-30
-10
0
-10
-5
0
5
10
42
49
79
90
93
17.8
38
43
48
51
34
40
47
76
87
85
94
101
108
111
PHT85-2
73
85
133
149
151
32
67
76
83
87
59
70
81
124
139
143
156
167
174
177
PHT85-3
110
128
205
234
240
47
101
114
125
132
90
105
122
193
220
221
242
262
277
285
109
128
292
377
403
52
108
128
150
172
96
112
139
300
371
317
372
422
464
492
PHT125-1
357
407
609
653
642
160
322
360
391
411
283
324
371
562
614
655
700
730
739
719
PHT300-1
483
553
869
994
1025
224
445
500
547
580
391
454
522
809
921
930
1019
1099
1164
1203
PHT300-2
864
980
1472
1642
1671
411
788
877
952
1002
693
797
906
1334
1477
1573
1701
1811
1891
1926
PHT85-1
45
53
89
106
113
19.6
43
50
56
62
33
39
46
79
95
91
101
111
121
129
PHT85-2
79
92
149
173
181
35
75
86
96
104
57
68
80
129
150
153
168
182
194
203
PHT85-3
119
139
229
271
288
51
113
130
146
160
86
103
120
200
238
235
260
285
308
327
121
144
331
438
484
58
125
150
181
215
93
110
139
314
402
341
402
461
515
560
PHT125-1
379
436
680
760
773
174
357
404
448
486
271
315
365
579
654
697
756
804
834
843
PHT300-1
521
599
962
1135
1205
245
495
563
628
686
380
445
516
833
985
982
1085
1185
1277
1356
PHT300-2
935
1064
1628
1867
1953
449
874
983
1085
1173
675
783
898
1373
1575
1660
1809
1946
2065
2158
PHT85-1
47
56
95
116
125
21
46
53
61
68
29
35
43
77
95
93
104
116
127
137
PHT85-2
83
97
159
188
201
36
80
92
104
115
51
62
74
127
151
155
172
188
202
214
PHT85-3
125
146
245
295
318
53
120
139
158
177
76
93
111
195
239
238
266
294
320
345
129
155
357
478
532
61
135
164
199
241
80
99
128
310
404
350
413
476
535
589
PHT125-1
384
448
729
838
870
179
376
429
481
529
240
285
338
563
651
712
783
843
890
919
PHT300-1
548
631
1024
1224
1316
255
524
600
675
748
341
406
478
807
978
995
1105
1214
1318
1416
PHT300-2
985
1122
1730
2008
2124
469
922
1044
1161
1270
613
723
839
1334
1564
1681
1839
1988
2124
2241
PHT85-1
48
57
99
122
133
21
47
55
63
72
22
28
36
71
90
91
103
115
127
139
PHT85-2
84
99
166
198
212
36
82
95
108
121
40
51
63
117
143
153
170
186
201
215
PHT85-3
127
149
253
308
335
51
122
142
163
183
59
75
93
179
225
233
262
290
319
346
134
162
373
500
560
61
138
169
208
254
59
77
106
287
383
345
409
473
534
589
PHT125-1
373
443
758
891
940
176
381
438
494
547
189
236
289
520
613
702
781
852
912
956
PHT300-1
561
647
1057
1273
1376
253
532
612
694
774
275
338
408
736
912
973
1085
1196
1306
1411
PHT300-2
1011
1154
1785
2083
2213
468
936
1063
1189
1308
508
616
731
1226
1465
1642
1801
1952
2093
2218
PHT85-4
PHT85-4
PHT85-4
PHT85-4
25
35
45
55
Correction factor
Refrigerant
R22
Subcooling [K]
2
4
10
15
20
25
30
35
40
45
50
0.98
1
1.06
1.11
1.15
1.2
1.25
1.3
1.35
1.39
1.44
R134a
0.98
1
1.08
1.13
1.19
1.25
1.31
1.37
1.42
1.48
1.54
R404A/507
0.96
1
1.1
1.2
1.29
1.37
1.46
1.54
1.63
1.7
1.78
R407C
0.97
1
1.08
1.14
1.21
1.27
1.33
1.39
1.45
1.51
1.57
When the subcooling ≠ 4 K then:
1. Table value x Factor = Plant capacity
2. Plant capacity : Factor = Table value
Example:
Qo = 10 kW
to = -10°C
tc = 45°C
Δtu = 25 K
Selection:
1. PHT 85, Orifice 04 = 135 KW x 1,25 = 168,75 kW ! Valve too large
Right selection:
2. 130 kW : 1,25 = 104 kW è PHT, Orifice 03 G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
22
Thermostatic expansion valves parts program:
T 2 and TE 2
+
Orifice
Thermostatic valve
TUA/TUAE and TCAE
+
Orifice
Thermostatic valve
TE 5 - TE 55
+
Thermostatic element
+
Valve body
Orifice
PHT
+
Thermostatic element
+
Orifice
+
Valve body
Flanges
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic expansion valves – PHT
23
AKV : Precise injection in the evaporator
AKV are electrically operated expansion valves designed for refrigerating plant.
The AKV valves are normally operated by a controller from the Danfoss ADAP-KOOL range.
The valves are operated with pulsating regulation which means that the opening degree is controlled by
demand (adaptive regulation).
Wide range of coils
for d.c. and a.c.
Features
Available with terminal box,
cable or AMP
The orifice assembly
is replaceable
Both expansion valve and
solenoid valve
Available with ODF solder
connections or weld
(AKV 15 and 20 – straight way)
Applications
Advantages
Facts
· Traditional refrigeration
· The AKV valves are supplied as a component programme, as follows:
· Separate valve incl. exchangeable
orifice
· Separate coil
· The AKV 10 valves cover a capacity
range from 1 kW to 16 kW (R22) and
are divided into 7 capacity ranges.
· Cold rooms
· Water chillers
· The valve requires no adjustment
· The AKV 20 valves cover a capacity
range from 100 kW to 630 kW (R22)
and are divided into 5 capacity ranges.
G R U P A
· Flexibility in MOP setting (the regulator closes when the pressure in the
evaporator falls below the set value).
· The AKV 15 valves cover a capacity
range from 25 kW to 100 kW (R22) and
are divided into 4 capacity ranges.
· The AKV valves can be used for HCFC
and HFC, R744 refrigerants.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
24
Technical data and ordering
AKV 10
Rated capacity kW
Valve type
R22
Connections
kv
value
1)
R134a
R404A/R507
R407C
3
m /h
AKV 10-1
1.0
0.9
0.8
1.1
0.010
AKV 10-2
1.6
1.4
1.3
1.7
0.017
AKV 10-3
2.6
2.1
2.0
2.5
0.025
AKV 10-4
4.1
3.4
3.1
4.0
0.046
AKV 10-5
6.4
5.3
4.9
6.4
0.064
AKV 10-6
10.2
8.5
7.8
10.1
0.114
AKV 10-7
16.3
13.5
12.5
17.0
AKV 15-1
25.5
21.2
19.6
AKV 15-2
40.8
33.8
AKV 15-3
64.3
53.3
84.6
78.3
Solder ODF
Inlet × outlet
in.
³⁄₈ × ½
Code no.
Inlet × outlet
mm
Code no.
068F1161
10 × 12
068F1162
³⁄₈ × ½
³⁄₈ × ½
³⁄₈ × ½
068F1164
10 × 12
068F1165
068F1167
10 × 12
068F1168
068F1170
10 × 12
068F1171
068F1173
10 × 12
068F1174
068F1176
10 × 12
068F1177
0.209
³⁄₈ × ½
³⁄₈ × ½
½ × ⁵⁄₈
068F1179
12 × 16
068F1180
25.2
0.25
¾×¾
068F5000
18 × 18
068F5001
31.4
40.4
0.40
18 × 18
068F5006
63.7
0.63
¾×¾
⁷⁄₈ × ⁷⁄₈
1¹⁄₈ × 1¹⁄₈
068F5005
49.4
068F5010
22 × 22
068F5010
068F5015
28 × 28
068F5016
AKV 15
AKV 15-4
102
101
1.0
AKV 20
Rated capacity kW
Valve type
R407C
m3/h
R22
R134a
R404A/R507
AKV 20-1
102
84.6
78.3
101
1.0
AKV 20-2
163
135
125
170
1.6
AKV 20-3
255
212
196
252
2.5
AKV 20-4
408
338
314
404
4.0
AKV 20-5
643
533
494
637
6.3
1)
Connections
kv
value
1)
Solder ODF
Inlet × outlet
in.
1³⁄₈ × 1³⁄₈
1³⁄₈ × 1³⁄₈
1⁵⁄₈ × 1⁵⁄₈
2¹⁄₈ × 2¹⁄₈
2¹⁄₈ × 2¹⁄₈
Code no.
Inlet × outlet
mm
Weld
Code no.
042H2020
35 × 35
042H2020
042H2022
35 × 35
042H2022
Inlet × outlet
in.
1¹⁄₄ × 1¹⁄₄
Code no.
042H2021
042H2024
42 × 42
042H2025
1¹⁄₄ × 1¹⁄₄
1¹⁄₄ × 1¹⁄₄
042H2027
54 × 54
042H2027
1½ × 1½
042H2028
042H2029
54 × 54
042H2029
2×2
042H2030
042H2023
042H2026
Rated capacities are based on:
Condensing temperature
tc = 32°C
Liquid temperature
tl = 28°C
Evaporating temperature
te = 5°C
Technical data
Valve type
AKV 10
AKV 15
Tolerance of coil voltage
+10 / –15%
+10 / –15%
AKV 20
+10 / –15%
Enclosure to IEC 529
Max. IP 67
Max. IP 67
Max. IP 67
Working principle (Pulse-width modulation)
PWM
PWM
PWM
Recommended period of time
6 Seconds
6 Seconds
6 Seconds
Capacity (R22)
1 to 16 kW
25 to 100 kW
100 to 630 kW
Regulation range (Capacity range)
10 to 100%
10 to 100%
10 to 100%
Connection
Solder
Solder
Solder or weld
Evaporating temperature
– 60 to 60°C
– 50 to 60°C
– 40 to 60°C
– 40 to 50°C
Ambient temperature
– 50 to 50°C
– 40 to 50°C
Leak of valve seat
<0.02% of kv-value
<0.02% of kv-value
<0.02% of kv-value
MOPD
18 bar
22 bar
18 bar
Filter, replaceable
Internal 100 μm
External 100 μm
External 100 μm
PS=42 barg
AKV 15-1,2,3 PS 42 barg
AKV 15-4
PS 28 barg
28 barg
Max. working pressure
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Expansion valves – AKV
25
Technical data and ordering
Ordering
Coils for AKV valves
AKV
AKV
AKV
AKV
AKV
AKV
10-1
10-2
10-3
10-4
10-5
10-6
10-7
15-1
15-2
15-3
15-4
20-1
20-2
20-3
20-4
20-5
+
+
+
+
+
+
018F6780
+
+
+
+
+
+
230 V d.c. 18 W, special
with terminal box
with DIN plugs
018F67811)
018F69911)
+
+
+
+
+
+
230 V d.c. 18 W, special
with 2.5 m cable
with 4.0 m cable
with 8.0 m cable
018F62881)
018F62781)
018F62791)
+
+
+
+
+
+
D.C. coils
220 V d.c. 20 W, standard
with terminal box
100 V d.c. 18 W, special
with terminal box
with DIN plugs
1)
Code no.
018F6851
Recommended for commercial refrigeration plant
018F6702
018F6177
+
+
–
+
–
–
240 V a.c. 10 W, 60 Hz
with terminal box
with DIN plugs
018F6713
018F6188
+
+
–
+
–
–
240 V a.c. 12 W, 50 Hz
with terminal box
018F6802
+
+
+
+
+
–
230 V a.c. 10 W, 50 Hz
with terminal box
with DIN-plugs
018F6701
018F6176
+
+
–
+
–
–
230 V a.c. 10 W, 60 Hz
with terminal box
with DIN-plugs
018F6714
018F6189
+
+
–
+
–
–
230 V a.c. 10 W, 50/60 Hz
with terminal box
with DIN-plugs
018F6732
018F6193
+
+
–
+
–
–
230 V a.c. 12 W, 50 Hz
with terminal box
018F6801
+
+
–
+
+
–
230 V a.c. 12 W, 60 Hz
with terminal box
018F6814
+
+
–
+
+
–
115 V a.c. 10 W, 50 Hz
with terminal box
with DIN-plugs
018F6711
018F6186
+
+
–
+
–
–
115 V a.c. 10 W, 60 Hz
with terminal box
with DIN-plugs
018F6710
018F6185
+
+
–
+
–
–
110 V a.c. 12 W, 50 Hz
with terminal box
018F6811
+
+
–
+
+
–
110 V a.c. 12 W, 60 Hz
with terminal box
018F6813
+
+
–
+
+
–
110 V a.c. 20 W, 50 Hz
with terminal box
018Z6904
+
+
+
+
+
+
24 V a.c. 10 W, 50 Hz
with terminal box
with DIN-plugs
018F6707
018F6182
+
–
–
+
–
–
24 V a.c. 10 W, 60 Hz
with terminal box
with DIN-plugs
018F6715
018F6190
–
–
–
+
–
–
24 V a.c. 12 W, 50 Hz
with terminal box
018F6807
+
–
–
+
+
+
24 V a.c. 12 W, 60 Hz
with terminal box
018F6815
+
–
–
+
+
+
24 V a.c. 20 W, 50 Hz
with terminal box
018F6901
+
+
+
+
+
+
24 V a.c. 20 W, 60 Hz
with terminal box
018F6902
+
+
+
+
+
+
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
26
d.o.o.
Code no.
240 V a.c. 10 W, 50 Hz
with terminal box
with DIN plugs
G R U P A
A.C. coils
Application example
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Expansion valves – AKV
27
ETS : Precision and reliability
ETS is a series of electrically operated expansion valves for precise liquid injection in evaporators for air
conditioning and refrigeration applications.
The valve piston and linear positioning design is fully balanced, providing bi-flow feature as well as solenoid tight shut-off function in both flow directions.
The ETS needs a current or voltage driver as a partner to be operated.
Features
Cable connectors
on request
Interchangeable
actuator
Precision stepper motor
with gearing
ETS with built in sight glass
– control of liquid at the right
position in a system
Precise positioning for optimal
control of liquid injection
Balance port design
allows bi-flow
ETS 50 and 100 have bi-metal connections
providing "waterless brazing", improved process and productivity. ETS 250 – 400 have pure
copper connections
Logarithm geometry for
best part load control
Applications
Advantages
Facts
· Traditional refrigeration
· For manual operation and service of
ETS valves an AST-g service driver is
available.
· Reference position: Overdriving against
the full close position
· Air conditioning units
· 150 steps/sec. (constant voltage drive)
2625 - 3810 step depending on chopper model. 8.5 - 12.7 sec. with chopper
current.
· ETS 50 and 100 are designed for HFC/
HCFC conditions including R410A,
providing 45.5 bar (659.9 psig) working
pressure.
ETS 250 and 400 are designed for HFC/
HCFC conditions, providing 34 bar
(448 psig) working pressure.
· Solenoid tight shut-off function.
G R U P A
· Balanced design providing bi-flow
operation as well as solenoid tight
shut-off function in both flow directions at MOPD 33 bar (478.6 psig).
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
28
Technical data and ordering
Valve incl. actuator and sight glass – Single pack
Valve incl. actuator – Industrial pack (9 pcs.)
Connection
Type
ODF × ODF
mm
Code no.
Industrial pack
034G1000
22 × 22
034G1050
034G1001
22 × 28
034G1051
/8 × 13/8
034G1002
22 × 35
034G1052
11/8 × 11/8
034G1003
28 × 28
034G1053
11/8 × 13/8
034G1004
28 × 35
034G1054
11/8 × 11/8
034G0000
28 × 28
034G0050
11/8 × 13/8
034G0001
28 × 35
034G0051
7
/8 × 7/8
7
1
/8 × 1 /8
7
ETS 50B
1
5
3
3
1 /8 × 1 /8
ETS 100B
Connection
Connection
Code no.
Industrial pack
ODF × ODF
in
034G0002
28 × 42
Type
034G0003
35 × 35
034G0053
13/8 × 15/8
034G0004
35 × 42
034G0054
15/8 × 15/8
034G0005
42 × 42
034G0055
Code no.
Single pack
/8 × 7/8
22 × 22
034G1008
/8 × 11/8
22 × 28
034G1005
11/8 × 11/8
28 × 28
034G1006
11/8 × 11/8
28 × 28
034G0007
13/8 × 13/8
35 × 35
034G0008
1 /8 × 1 /8
28 × 28
034G2000
13/8 × 13/8
35 × 35
7
ETS 50B 2)
7
ETS 100B
1
ETS 250
034G0052
1 /8 × 1 /8
ODF × ODF
[mm]
ODF × ODF
[in.]
1
15/8 × 15/8
15/8 × 15/8
ETS 400
034G2001
034G2002
034G3000
21/8 × 21/8
54 × 54
034G3001
Capacities
1
Rated capacity1)
Type
R410A
kW
ETS 50B 2) 262.3
ETS 100B
R407C
R22
R134a
R404A
TR
kW
TR
kW
TR
kW
TR
kW
TR
75.7
240.5
69.1
215
62
170
48.9
161.4
46.3
91.2
300.5
86.6
488.4 140.9 447.8 128.7 400.4 115.4 316.5
ETS 250
-
-
1212
349
1106
319
874
252
828
239
ETS 400
-
-
1933
556
1764
509
1394
402
1320
381
) The rated capacity is based on:
Evaporating temperature te :
Liquid temperature tl :
Condensing temperature tc :
Full stroke opening.
5°C (40°F)
28°C (82°F)
32°C (90°F)
2
) ETS 25B is available upon request. Please contact Danfoss.
Note: ETS 25B is half the capacity of ETS 50B.
Valve operation
ETS 100
ETS 50
450
250
400
200
350
Q 0 [kW]
Q 0 [kW]
300
150
100
250
200
150
100
50
50
0
0
0
10
20 30 40 50 60
70 80
90 100
0
10
Opening [%]
20 30 40 50 60
70 80
90 100
70 80
90 100
Opening [%]
ETS 400
ETS 250
1400
2000
1200
1600
Q 0 [kW]
Q 0 [kW]
1000
800
600
1200
800
400
400
0
0
0
10
20 30 40 50 60
Opening [%]
70 80
90 100
0
10
20 30 40 50 60
Opening [%]
d.o.o.
Capacity based on: R407C
te = 5°C (40°F)
tl = 28°C (82°F)
tc = 32°C (90°F)
G R U P A
200
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Electrical expansion valves – ETS
29
EVR: high reliability and flexibility
EVR valves are direct or servo-operated solenoid valves for liquid, suction and hot gas lines. They are
suitable for condensing units and power packs in all refrigeration, freezing and air conditioning applications and are compatible with fluorinated refrigerants, including high-pressure refrigerants such as
R410A (EVRH). The valves can be delivered as normally open and normally closed valves as well as with
or without manual operation.
Features
Drawn stainless steel tube with internal
armature top for maximum external tightness
"Clip on" coil system for
quick and easy mounting
Coil with terminal box,
1 m cable or DIN plug
Spring damping to increase
the lifetime of the seat plate
Stainless steel armature
Forged brass body for maximum
external tightness
Extended ends for soldering
make installation easy
Teflon seat plate with cardan effect to
secure maximum internal tightness
Advantages
Facts
· Traditional refrigeration
· Heat pump systems
· Complete programme of valves and
coils for every application.
· Can be used for all fluorinated
refrigerants (CFC, HCFC and HFC).
· Air conditioning units
· Wide range of coils for a.c. and d.c.
· Temperature range: –40 to 105°C
· Liquid coolers
· Wide range of connection types and
sizes.
· Normally open or normally closed.
· Max. working pressure (MWP) 32 bar
(EVR 2-3, 45.2 bar / EVR 6-10, 35 bar /
EVR 15 - 50, 32 bar).
· With or without manual operation.
· MOPD up to 25 bar with 12 W a.c. coil.
· High reliability and durability due to
maximum internal and external tightness.
· 100% test of functionality, internal/
external leakage and electrical characteristics.
· Transport refrigeration
G R U P A
Applications
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
30
Technical data and ordering
Separate valve bodies, normally closed (NC)
Type
EVR 2
Required
coil type
a.c.
EVR 3
EVR 6
EVR 10
a.c./d.c.
EVR 15
a.c.
EVR 20
d.c.
EVR 22
a.c.
Code no. 1)
Valve body without coil
Connection
Flare
With manual
operation
in.
mm
in./mm
in.
mm
¼
6
032F8056
032F1201
032F1202
¼
6
032F8107
032F1206
032F1207
3/8
10
032F8116
032F1204
032F1208
3/8
10
032F8072
032F1212
032F1213
½
12
032F8079
032F1209
032F1236
½
12
032F8095
032F1217
032F1218
5/8
16
032F8098
032F1214
032F1214
5/8
16
032F8101
032F1228
032F1228
5/8
16
032F8100
7/8
22
032F1225
032F1225
7/8
22
032F1240
032F1240
7/8
22
11/8
28
032F1244
032F1245
7/8
22
032F1264
032F1264
7/8
22
13/8
35
032F3267
032F3267
0.16
0.27
0.8
1.9
2.6
032F1254
5.0
032F1274
6.0
032F2200
032F2201
28
032F2205
032F2206
13/8
35
032F2207
032F2208
13/8
35
EVR 25
a.c./d.c.
Without manual
operation
032F1227
11/8
EVR 32
kv value 2)
Solder ODF
042H1105
042H1106
042H1103
042H1104
42
042H1107
042H1108
042H1109
042H1110
42
042H1113
042H1114
54
042H1111
042H1112
15/8
15/8
EVR 40
21/8
10.0
16.0
25.0
Mounting bracket
Mounting bracket
For mounting EVR 2, 3, 6 and 10
032F0197
Coils - alternating current a.c
Code no. 1)
Type
EVR
2 → 40 (NC)
Voltage
V
Frequency
Hz
With 1 m
3-core cable
IP 67
With
terminal box
IP 67
With DIN plugs
and protective
cap IP 20
With
DIN plugs
Appendix Power conno.
sumption
12
50
018F6256
018F6706
018F6181
24
50
018F6257
018F6707
018F6182
15
42
50
018F6258
018F6708
018F6183
48
50
018F6259
018F6709
018F6184
115
50
018F6261
018F6711
018F6186
018F7361
22
220-230
50
018F6251
018F6701
018F6176
018F7351
31
240
50
018F6252
018F6702
018F6177
018F7352
33
380-400
50
018F6253
018F6703
018F6178
37
420
50
018F6254
018F6704
018F6179
38
24
60
018F6265
018F6715
018F6190
14
115
60
018F6260
018F6710
018F6185
20
220
60
018F6264
018F6714
018F6189
29
240
60
018F6263
018F6713
018F6188
110
50/60
018F6280
018F6730
018F6192
018F7360
21
220-230
50/60
018F6282
018F6732
018F6193
018F7363
32
018F7358
16
17
18
Holding:
10 W
21 VA
Inrush:
44 VA
30
Terminal box with LED light indicator
With built-in light emmiting indicator diode for solenoid valves
DIN socket
1)
2)
G R U P A
Terminal box
018Z0089
042N0156
Code numbers in bold are normally on stock and a shorter delivery time can therefore be expected.
The kv value is the water flow in m3/h at a pressure drop across valve of 1 bar, ρ = 1000 kg/m3.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Solenoid valves and coils – EVR
31
EVRA and EVRAT - Solenoid valves
EVRA is a direct or servo operated solenoid valve for liquid, suction and hot gas lines with ammonia or
fluorinated refrigerants. EVRA valves can be supplied as complete valves or as components, i.e. valve
body, flanges and coils. EVRAT has capacities similar to the EVRA but has the advantage of no opening
pressure differential - it will open - and stay open, also when there is no flow through the valve.
Advantages and features
· EVRA and EVRAT valves can be used for all non-flammable refrigerants, including R 717, and non-corrosive
gases/liquids - assuming seals of correct material are
used
Connections
There is a wide range of connection possibilities with EVRA 3 to 25
and EVRAT 10-20:
· Butt welding DIN (2448)
· EVRA and EVRAT valves uses a teflon gasket which ensures a very high tightness across valve seat
· Butt welding ANSI
· EVRA valves has a low pressure drop
· Socket welding ANSI (B 16.11)
· EVRAT valves has a opening differential pressure of 0
(zero)
· Solder connection DIN (2856)
· The EVRA and EVRAT valves offers a wide range of flange
connection dimensions in accordance with standards:
DIN ANSI, SOC, SA and FPT
· FPT internal thread, NPT (ANSI/ASME B 1.20.1)
EVRA 32 and 40 are supplied with integrated flanges for either:
· Welding DIN (2448) or
· Welding ANSI (B 36.10)
· Certification: Please contact Danfoss for an updated list
with
type approvals
for the
products
MB FRIGO
Grupa d.o.o.,
Bani
81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
32
d.o.o.
· Strainer type FA can be mounted directly on the valve
body except for EVRA 32 and 40
· Solder connection ANSI (B 16.22
G R U P A
· The EVRA and EVRAT valve range can be used with the
wide range of standard Danfoss coils
(3⁄8 - 1½ in. B36.10 schedule 80, 2 in. B36.10 schedule 40)
Technical data and code numbers
Technical data
Opening differential pressure with standard coil ∆p bar
Max. (= MOPD) liquid 2)
10 W a.c.
12 W a.c.
20 W d.c.
Min.
EVRA 3
0.00
21
25
14
EVRA 10
0.05
21
25
18
EVRAT 10
0.00
14
21
16
EVRA 15
0.05
21
25
18
EVRAT 15
0.00
14
21
16
EVRA 20
0.05
21
25
13
EVRAT 20
0.00
14
21
13
EVRA 25
0.20
21
25
14
EVRA 32
0.20
21
25
14
EVRA 40
0.20
21
25
14
1
) The kv value is the water flow in m3/h at a pressure drop across valve of 1 bar, ρ = 1000 kg/m3 .
2
) MOPD for media in gas form is approx. 1 bar greater.
Type
Temperature of
medium
°C
Max. working
pressure PB bar
-40 → 105
42
kv-value
m3/h
0.23
1.5
1.5
2.7
2.7
4.5
4.5
10.0
16.0
25.0
Code numbers
Complete valves without flanges
Code no.1)
10 W coil with 1 m cable
10 W coil with terminal box
EVRA 3
032F3102
032F3103
Valves with manual operation
See table "Flange set"
EVRA 10
032F6207
032F6208
EVRA 10
032F6212
032F6213
Valves without manual operation
EVRA 15
See table "Flange set"
032F6217
032F6218
EVRA 20
032F6222
032F6223
1) Valve body with gaskets, bolts and 10 W a.c. coil. Please specify code no., voltage and frequency. Voltage and frequency can also be given in the form of an appendix
number, see table “Appendix numbers”, under EVR.
Type
Connection
Type
EVRA 10
EVRAT 10
EVRA 15
EVRAT 15
EVRA 20
EVRA 20
EVRAT 20
EVRA 25
EVRA 3
EVRA 10
EVRA 25
Connection
Separate valve bodies
Valves with manual operation
Valves without manual operation
See table Flange set
See table Flange set
Required coil type
a.c. / d.c.
a.c. / d.c.
a.c. / d.c.
a.c. / d.c.
a.c.
d.c.
a.c. / d.c.
a.c. / d.c.
a.c. / d.c.
a.c. / d.c.
a.c. / d.c.
Code no.
032F6210
032F6214
032F6215
032F6216
032F6220
032F6221
032F6219
032F6225
032F3050
032F6211
032F6226
Separate valve bodies with butt weld connections
Type
Valves with manual operation
EVRA 32
EVRA 32
EVRA 40
EVRA 40
Butt weld connection
DIN
Code no.
042H1126
042H1131
042H1128
042H1132
Size
1 ¼ in.
1 ½ in.
1 ½ in.
2 in.
ANSI
Code no.
042H1140
042H1141
042H1142
042H1143
Flange sets
Connection
Butt welding DIN (2448), Tongue flange sets
Butt welding ANSI B 36.10, Tongue flange sets
EVRA 3, 10 and 15
EVRAT 10 and 15
Socket welding ANSI (B 16.11), Tongue flange sets
Solder DIN (2856), Tongue flange sets
mm
10
15
20
10
15
20
10
15
16
22
in.
3
/8
½
¾
3
/8
½
¾
3
/8
½
5
Solder ANSI B 16.22, Tongue flange sets
FPT internal thread, NPT (ANSI / ASME B 1.20.1),
Tongue flange sets
Butt welding DIN (2448), Tongue flange sets
EVRA 20 and 25
EVRAT 20
Socket welding ANSI (B 16.11), Tongue flange sets
Soldering DIN (2856), Tongue flange sets
10
15
20
25
32
20
25
32
20
25
22
28
FPT internal thread, NPT (ANSI / ASME B 1.20.1),
Tongue flange sets
20
25
7
/8
1 1/8
¾
1
d.o.o.
Soldering ANSI B 16.22, Tongue flange sets
G R U P A
Butt welding ANSI B 36.10, Tongue flange sets
/8
/8
3
/8
½
¾
1
1¼
¾
1
1¼
¾
1
7
Code no.
027N1112
027N1115
027N1120
027N2020
027N2021
027N2022
027N2010
027N2011
027L1116
027L1122
027L1117
027L1123
027G1005
027G1006
027N1220
027N1225
027N1230
027N3031
027N3032
027N3033
027N2001
027N2002
027N1222
027N1228
027N1223
027N1229
027G1001
027G1002
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Solenoid valves – EVRA and EVRAT
33
VHV and STF: 4-way reversing valves
Pilot operated 4-way reversing valves allow an inversion of the refrigeration cycle, changing from cooling
mode in summer to heating mode in winter. 4 way valves are also used in defrost cycles in order to allow
hot gas to be sent into iced up evaporators. The cycle inversion is initiated by a small solenoid pilot valve,
which controls the movement of a slider, and in turn governs the refrigerant flow path. The valve is connected to the discharge and suction of the compressor.
Features
discharge connection
slider
valve body
connection to evaporator/
condenser
connection to condenser/evaporator
suction connection
Applications
Advantages
Facts
· Heat pump applications
· Each model can be used with R410A
refrigerant as well as R407C, R134a,
R404A, R22
· Wide application range for all commonly used refrigerants: (R134A,
R404A, R407C, R22 and R410A)
· Different tube diameters and configurations available
· Max. working pressure: 45 bar
· Designed for instantaneous changeover with minimum pressure differential
· Full capacity range up to 400 kW
· Minimized leakage in the valve
· 30 years of experience and know-how
· Reversing chillers
· Packaged air conditioning systems
· Room air conditioning systems
· Ambient temperature: -20 to 55ºC
G R U P A
· Largest valve available on the market
(VHV-6001)
· Reduced pressure drop due to unique
design (shape of internal elements)
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
34
Technical data and ordering
Model
Discharge
Suction
Nominal
capacity 1)
Style
Code no.
Box qty
mm
inch
mm
in.
kW
STF-0101G
8.10
5/16
9.70
3/8
1.6 - 5.1
A
061L1206
4
STF-0101G
8.10
5/16
9.70
3/8
1.6 - 5.1
A
061L1188
45
STF-0104G
8.10
5/16
9.70
3/8
2.4 - 6.4
A
061L1143
45
STF-0201G
9.70
3/8
12.95
1/2
2.8 - 11.4
A
061L1207
3
STF-0201G
9.70
3/8
12.95
1/2
2.8 - 11.4
A
061L1144
32
STF-0202G
9.70
3/8
12.95
1/2
3.8 - 10.3
A
061L1139
32
STF-0204G
9.70
3/8
16.03
5/8
2.8 - 11.4
D
061L1145
32
STF-0205G
8.10
5/16
12.95
1/2
2.8 - 11.4
B
061L1146
32
STF-0208G
9.70
3/8
16.03
5/8
2.8 - 11.4
C
061L1147
32
STF-0209G
9.70
3/8
12.95
1/2
2.8 - 11.4
B
061L1148
32
STF-0214G
12.95
1/2
16.03
5/8
2.8 - 11.4
D
061L1149
32
STF-0301G
12.95
1/2
16.15
5/8
5.3 - 14.6
E
061L1208
4
STF-0301G
12.95
1/2
16.15
5/8
5.3 - 14.6
E
061L1150
32
STF-0306G
12.95
1/2
19.2
3/4
5.3 - 14.6
E
061L1151
32
STF-0401G
12.80
1/2
19.15
3/4
8.3 - 29.2
B
061L1209
2
STF-0401G
12.80
1/2
19.15
3/4
8.3 - 29.2
B
061L1152
24
STF-0404G
12.80
1/2
19.15
3/4
8.4 - 33
B
061L1193
24
STF-0409G
12.80
1/2
22.40
7/8
8.3 - 29.2
B
061L1154
24
STF-0413G
16.00
5/8
22.40
7/8
8.3 - 29.2
B
061L1155
24
STF-0420G
12.80
1/2
22.40
7/8
8.4 - 33
B
061L1156
24
STF-0712G
19.15
3/4
22.30
7/8
21 - 53
B
061L1223
1
6
STF-0712G
19.15
3/4
22.30
7/8
21 - 53
B
061L1195
STF-0715G
22.50
7/8
28.70
1 1/8
21 - 53
B
061L1158
6
STF-0728G
22.50
7/8
22.30
7/8
21 - 53
B
061L1160
6
STF-1511G
22.50
7/8
28.90
1 1/8
41 - 61
F
061L1224
1
STF-1513G
22.50
7/8
35.22
1 3/8
41 - 61
F
061L1217
1
STF-1514G
28.90
1 1/8
35.22
1 3/8
41 - 61
F
061L1218
1
STF-2011G
22.50
7/8
28.90
1 1/8
41 - 77
B
061L1219
1
STF-2017G
28.70
1 1/8
45.15
1 3/8
41 - 77
B
061L1225
1
VHV-2501 2)
25.70
1
32.05
1 1/4
55 - 98
G
061L1175
1
VHV-2505
28.70
1 1/8
45.15
1 3/8
55 - 98
G
061L1191
1
VHV-2506
28.70
1 1/8
41.70
1 5/8
55 - 98
G
061L1192
1
VHV-3001
32.05
1 1/4
38.40
1 1/2
68 - 129
G
061L1176
1
1
VHV-3003
28.50
3)
1 1/8
41.70
1 5/8
68 - 129
G
061L1183
VHV-4001
38.35
1 1/2
45.15
1 3/4
122 - 195
G
061L1179
1
VHV-4002
41.20 3)
1 5/8
41.70
1 5/8
122 - 195
G
061L1184
1
VHV-5001
38.35
1 1/2
54.40
2 1/8
183 - 256
G
061L1180
1
VHV-5002
41.20
3)
1 5/8
54.40
2 1/8
183 - 256
G
061L1185
1
VHV-6001
41.20 3)
1 5/8
67.00
2 5/8
267 - 374
G
061L1186
1
Cable length
mm
Rated voltage
Code no.
Box qty
STF-01AB500A1
600
24 V AC
061F2092
10
STF-01AB503B1
1200
24 V AC
061L2038
100
STF-01AJ506B1
600
220-240 V AC
061L2093
10
STF-01AJ504F1
1200
208-240 V AC
061L2016
100
STF-01AJ504F1
1200
208-240 V AC
061L2094
10
STF-01AJ512D1
2000
220-240 V AC
061L2095
10
STF-01AJ512D1
2000
220-240 V AC
061L2074
60
C
D
E
F
G
d.o.o.
1) The nominal capacities for R407C
2) VHV-2501 does not have a bracket
3) Refers to O.D.
4) STF coils can be used with all STF and VHV valves
B
G R U P A
Model 4)
A
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
4-way reversing valves – VHV and STF
35
KP: excellent operation and easy installation
KP pressure controls are designed to protect refrigeration systems from excessively high discharge pressures, excessively low suction pressures, to start/stop compressors or to operate fans of aircooled condensers. KP thermostats with adsorption charge are the optimum choice for frost protection of chillers.
The enhanced contact system for 16 Amp makes it possible to operate electrical motors up to 2 kW
directly, without the use of contactors.
Features
Compact design
Manual test
Vibration proof
R410A and CO2 compatible
High contact rating;
16 Amp, 400V
Large pressure ranges
Reliable and fully visible
switch function
Fully welded
bellows element / fail-safe bellow
Flare or hermetic tight
solder connections
Applications
Advantages
Facts
· Traditional refrigeration
· Easy to handle compact design with
large and visible scale plates.
· Can be used for all fluorinated refrigerants.
· Air conditioning units
· Particularly vibration and shock resistant.
· Approval: CE and UL.
· Liquid coolers
· Accurate and reliable compressor
operation due to excellent electromechanical function.
· Pressure controls available with flare,
solder or capillary tube connections.
· Heat pump systems
· Transport refrigeration
· Easy to install electrical connection
which also facilitates rack mounting.
· Thermostats available with capillary
sensor, air sensor or cylindrical pocket
sensor.
· IP30 and IP44 enclosures available.
· KP 6, 7 and 17 with fail-safe bellows
element.
G R U P A
· Easy functional check with manual test
function of contact system (no tools).
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
36
Technical data and ordering
Pressure controls for fluorinated refrigerants
Low pressure (LP)
High pressure (HP)
Pressure Regulating Differential Regulating Differential
range
Δp
range
Δp
bar
bar
bar
bar
Type
KP 5
8 → 32
High
Code no. 1)
Reset
LP
Contact
system
HP
1.8 → 6.0
Aut.
Fixed 3
Man.
SPDT
Aut.
KP 15
Dual
−0.2 → 7.5
0.7 → 4.0
8 → 32
Fixed 4
Aut.
¼ in.
6 mm
flare
¼ in.
ODF
solder
6 mm
ODF
solder
060-117166 060-117966 060-117766
060-117366 060-118066
060-117866
060-124166 060-125466
SPDT + LP
signal
Man.
060-124366
060-126166
060-126566 060-129966
SPDT + LP/HP
060-126466 060-128466
signal
Conv.
060-115466 060-001066
Aut.
Man.
Conv.
Pressure controls with DIN 32733 approval, for fluorinated refrigerants
Low pressure (LP)
Type
2)
High pressure (HP)
Pressure Regulating Differential Regulating Differential
range
∆p
range
∆p
bar
bar
bar
bar
Code no. 1)
Reset
LP
KP 1
Low
0.2 → 7.5
0.7 → 4.0
Aut.
−0.9 → 7.0
Fixed 0.7
Man.
KP 2
Low
−0.2 → 5.0
0.4 → 1.5
Aut.
Contact
system
HP
SPDT
SPDT
¼ in.
6 mm
flare
060-110366 060-111166
060-110966
060-112066
060-112366
KP 6W
High
8 → 42
4 → 10
Aut.
SPDT
060-519066
High
8 → 42
Fixed 4
Man.
SPDT
060-519166
KP 7W
High
8 → 32
4 → 10
Aut.
SPDT
060-119066
KP 7B
High
8 → 32
Fixed 4
Man.
SPDT
060-119166
KP 7BS
Dual
8 → 32
Fixed 4
Man./
Man.
SPST
060-120066
KP 17W
Dual
KP 17B
0.7 → 4
8 → 32
Fixed 4
Dual
−0.2 → 7.5
0.7 → 4
8 → 32
Fixed 4
Aut.
Man
KP17WB Dual
−0.2 → 7.5
Fixed 1
8 → 32
Fixed 4
Conv.
Conv.
Aut.
Aut.
060-120366
SPDT + LP/HP
060-127566
signal
SPDT
6 mm
ODF
solder
060-110166 060-111266 060-111066
KP 6B
0.2 → 7.5
¼ in.
ODF
solder
060-127666
060-126866
060-127466
SPDT + LP/HP
060-539766
signal
Thermostats
A
B
C
E
Setting
range
°C
Type
KP 61
Highest
temperature
°C
Charge
Bulb type
Reset
Max. bulb
temp.
°C
Capillarytube in
m
Code no. 1)
–30 → 15
5.5 → 23
1.5 → 7
Vapour
A
aut.
120
2
060L110066
5
–30 → 13
4.5 → 23
1.2 → 7
Vapour
B
aut.
060L110166
120
2
060L110266
–30 → 15
5.5 → 23
1.5 → 7
Vapour
B
aut.
120
2
060L110366
060L112866
KP 62
–30 → 15
6.0 → 23
1.5 → 7
Vapour
C
aut.
120
KP 63
–50 → –10
10.0 → 70
2.7 → 8
Vapour
B
aut.
120
KP 68
–5 → 35
4.5 → 25
1.8 → 7
Vapour
C
aut.
120
KP 69
–5 → 35
4.5 → 25
1.8 → 7
Vapour
B
aut.
120
KP 62
–30 → 15
5.0 → 20
2.0 → 8
Adsorbtion
C
aut.
80
KP 71
–5 → 20
3.0 → 10
2.2 → 9
Adsorbtion
E
aut.
80
2
–25 → 15
12.0 → 70
8.0 → 25
80
2
060L111766
–20 → 15
4.0 → 15
2.0 → 13
55
3
060L114066
–25 → 15
3.5 → 20
3.25 → 18
80
2
KP 73
F
Differential ∆t
Lowest
temperature
°C
Adsorbtion
0 → 35
3.5 → 16
2.5 → 12
Adsorbtion
KP 77
20 → 60
3.5 → 10
3.5 → 10
Adsorbtion
OIL: 60 → 120
OIL: Fixed 14
OIL: Fixed 14
HT: 100 → 180
HT: Fixed 25
HT: Fixed 25
Adsorbtion
KP 98
F
aut.
060L111166
2
060L111266
060L111066
aut.
110
2
E
aut.
130
2
E
max.
E
060L110866
150
1
250
2
060L111366
060L114366
060L112066
060L113766
060L112166
060L113166
Mounting brackets
Type
Code no. 1)
Wall bracket
060-105566
Angle bracket
060-105666
1)
d.o.o.
2)
Code numbers in bold are normally on stock and a shorter
delivery time can therefore be expected.
KP 6, 7 and 17 with fail-safe bellows element.
G R U P A
KP 75
E
060L110666
2
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure controls and thermostats – KP
37
ACB: Cartridge Pressure Controls
The ACB series cartridge switches, are small disc type pressure controls manufactured by Danfoss
Saginomiya in Poland. The core steps of the manufacturing process of these controls are carried out
using precision manufacturing techniques, and within a clean-room environment. This ensures that
product specifications can be guaranteed over a longer period, providing reliable performance during
the whole product lifetime.
Features
wires
reset button
water-proof casing
diaphragm
pressure connection
(1/4” female flare)
electrical terminals
micro-switch
shaft
depressor pin
Fig.: type SPST manual reset
Applications
Advantages
Facts
· Traditional refrigeration
· Compact and easy to install
· CE, TÜV, VDE, UL and C-UL approvals
· Heat pump systems
· Excellent reliability and repeatability
(SPDT man. only CE appovals)
· Air conditioning units
· Wide choice of specifications: setpoint, pressure connection, electrical
connection
· Contact load up to 6 A (250 V AC)
· Flexible order quantity due to European production with short lead times
· Spades or cables (1,5 m cable for
standard program)
· Global coverage and widespread use
at all major OEMs
· Pressure range from - 0,50 bar to
45 bar
· Over 100million pcs installed in the
field
· Automatic or manual reset
· Liquid coolers
· Transport refrigeration
· Normally Closed (NC), Normally Open
(NO) or SPDT contact system
G R U P A
d.o.o.
· IP 65 (water proof version with cables)
and IP40 (version with spade connectors) available
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
38
Technical data and ordering
Cut out
Application
bar
High
pressure cut out
Cut in
Reset
bar
Connection
Contact system/
enclosure type:
W-water-proof 1)
S-with spades 2)
6mm
1/4”
SPST-NC / W
061F7504
061F7505
061F7506
061F8711
061F8709
Solder
1/4” female flare
automatic
18 ± 0,7
13 ± 1,2
SPST-NC / S
-
SPDT / W
-
-
061F9057
automatic
20 ± 1,0
16 ± 1,5
SPST-NC / S
-
061F8710
061F8708
automatic
23 ± 1,0
19 ± 1,5
SPST-NC / S
-
061F8707
061F8703
SPST-NC / W
-
-
061F8494
-
-
061F9056
-
-
061F9243
automatic
23 ± 0,7
19 ± 1,2
SPDT / W
manual
SPST-NC / W
061F7507
061F7508
061F7509
SPST-NC / S
-
061F8705
061F8701
automatic
26 ± 1,0
20 ± 1,5
SPDT / S
-
061F9104
061F9100
SPDT / W
-
-
061F9055
SPST-NC / W
061F9703
061F9714
061F9713
automatic
SPST-NC / W
061F7510
061F7513
061F7514
automatic
SPST-NC / S
-
061F8704
061F8700
SPDT / W
-
-
061F9054
SPDT / S
-
061F9107
061F9103
automatic
manual
26 ± 1,0
28 ± 1,0
20 ± 2,0
21 ± 1,5
automatic
manual
manual
28 ± 1,0
21 ± 2,0
automatic
31 ± 1,0
24 ± 1,5
SPDT / W
-
-
061F9242
SPST-NC / W
-
-
061F9522
SPST-NC / W
061F8493
-
061F8492
SPST-NC / S
-
061F8706
061F8702
SPDT / W
automatic
-
-
061F9053
061F7515
061F7516
061F7517
-
-
061F9575
SPST-NC / W
manual
42 ± 1,2
33 ± 2,0
0,5 ± 0,4
1,5 ± 0,3
0,5 ± 0,5
1,5 ± 0,5
automatic
Low pressure
cut-out
automatic
0,7 ± 0,5
SPDT / W
-
-
061F9052
SPST-NO / W
061F7518
061F7519
061F7520
SPST-NO / S
-
061F7402
061F7400
SPDT / S
-
061F9106
061F9102
SPST-NO / W
061F7521
061F7522
061F7523
SPDT / W
-
-
061F9058
SPST-NO / S
-
061F7403
061F7401
SPDT / S
-
061F9105
061F9101
1,7 ± 0,4
automatic
0,7 ± 0,5
automatic
Fan Control
1,7 ± 0,5
1,7 ± 0,5
2,7 ± 0,4
8,5 ± 1,2
11 ± 0,8
13 ± 1,5
16 ± 1,0
automatic
1)
2)
SPST-NO / W
061F7524
061F7525
061F7526
061F8491
-
061F8490
061F8334
-
061F8333
SPST-NO / W
Waterproof models (IP 65) with 1,5 m wires AWG18, packed per 20 pcs
Models with spade connectors (IP 40), packed per 50 pcs
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Cartridge pressure controls – ACB
39
UT: Simple and easy temperature control
The UT thermostat is a temperature-controlled thermostat with stainless steel (18/8) or copper capillary
and sensor. The temperature must be set to correspond to the required mean temperature.
The thermostat has a fixed differential.
Features
Sensor copper or 18/8 steel
Switch system:
Changeover (SPDT) switch
The temperature can be set easily
and accurately using the large knob
on the front of the thermostat.
Electric connections are
made by means of cable
clamps and terminal screws.
Capillary tube copper or 18/8 steel
Applications
Advantages
Facts
· Cold rooms
· UT is available for wall or panel
mounting
· UT 72 for universal use -30 to 30°C
· UT for wall mounting:
IP 20 to EN 60529/IEC 52
· Differential is fixed 2.3°K
· UT for panel mounting:
IP 00 to EN 60529/IEC 529
· Contact load:
· Beverage coolers
· Ice cream makers
· Milk coolers
· Refrigerated counters
· Heat recovery systems
· Automatic reset
- AC 1: 10 A, 250/380 V (ohmic)
- AC 11: 2.5 A, 250/380 V (induct.)
G R U P A
· Air-conditioning plant
· UT 73 for frost protection 0 to 40°C
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
40
Technical data and ordering
Version
Wall
mounting
Panel
mounting
1)
Type
Range
°C
Differential
K
UT 72
–30 → 30
2.3
Reset
Max.
sensor
temperature
°C
Capillary
tube
length
m
Qty.
Copper
18/8
aut.
60
1.5
1
060H1101
060H1106
Code no.
UT 72
–30 → 30
2.3
aut.
60
1.5
1
060H11031)
UT 72
–30 → 30
2.3
aut.
60
1.5
20
060H1104
UT 72
–30 → 30
2.3
aut.
60
3.0
1
060H1105
UT 73
0 → 40
2.3
aut.
90
1.5
1
060H1102
UT 72
–30 → 30
2.3
aut.
60
1.5
48
060H1201
UT 72
–30 → 30
2.3
aut.
60
3.0
48
060H1205
UT 73
0 → 40
2.3
aut.
90
1.5
48
060H1202
Incl. bulb clamps
Accessories
Qty.
UT 72
UT 73
Setting knobs
48
060-1067
060-1096
Bulb clamp
36
060-1090
060-1090
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostat – UT
41
RT: pressure and temperature controls
The RT series includes thermostats and pressure controls for general applications within industrial and
marine refrigeration. An RT thermostat is fitted with a single-pole changeover switch. The position of
the contacts depends on the bulb temperature and the set scale value. An RT pressure control contains
a pressure operated single-pole changeover contact, the position of which depends on the pressure in
the in let connection and the set scale value.
Features
Setting knob
Cable entry Pg 13.5
Heavy duty body
0.2 to 2.5 mm² wiring
High precision control system
Interchangeable SPDT
contact system
IP 66
Stanless steel bellow
Applications
Advantages
Facts
· General applications within industrial
and marine refrigeration
· Wide regulating range
· Suitable for alternating and direct current
· Enclosure: IP 66 to EN 60529 / IEC
60529, except for versions with ext.
reset which are to IP 54
· Interchangeable contact system
· Short circuit protection, fuse 10 Amp
· Special versions with gold plated
contact surfaces for PLC applications
· Insulation 400 V
· Ambient temperature: −50 to +70°C
for housing
· Waterproof versions, enclosure IP 66
· Cable connection: Pg 13.5.
G R U P A
· Versions for neutral zone regulation
· High stability and accuracy
· Cable diameter: 6 → 14 mm.
· Long operating life time
· Pressure controls for fluorinated refrigerants and R717 (NH3)
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
42
Technical data and ordering: RT temperature controls
Charge
Type
Vapour 1)
Adsorption 2)
Partial
3)
Bulb
type
Regulation
range
Differential Δ t
°C
Lowest
temp.
setting
K
Highest
temp.
setting
K
-60 → -25
1.7 → 7.0
1.0 → 3.0
Reset
Max.
bulb temp.
Capillary
tube length
°C
m
aut.
150
2
Code no.
RT 10
A
017-507766
RT 9
A
-45 → -15
2.2 → 10.0
1.0 → 4.5
aut.
150
2
017-506666
RT 3
A
-25 → +15
2.8 → 10.0
1.0 → 4.0
aut.
150
2
017-501466
RT 17
B
-50 → -15
2.2 → 7.0
1.5 → 5.0
aut.
100
017-511766
RT 11
B
-30 → 0
1.5 → 6.0
1.0 → 3.0
aut.
66
017-508366
RT 4
B
-5 → +30
1.5 → 7.0
1.2 → 4.0
aut.
75
017-503666
017-5037664)
RT 13
A
-30 → 0
1.5 → 6.0
1.0 → 3.0
aut.
150
2
017-509766
RT 2
A
-25 → +15
5.0 → 18.0
6.0 → 20.0
aut.
150
2
017-500866
RT 8
A
-20 → +12
1.5 → 7.0
1.5 → 7.0
aut.
145
2
017-506366
RT 12
A
-5 → +10
1.0 → 3.5
1.0 → 3.0
aut.
65
2
017-508966
RT 23
A
+5 → +22
1.1 → 3.5
1.0 → 3.0
aut.
85
2
017-527866
RT 15
A
+8 → +32
1.6 → 8.0
1.6 → 8.0
aut.
150
2
017-511566
RT 24
A
+15 → +34
1.4 → 4.0
1.4 → 3.5
aut.
105
2
017-528566
RT 140
C
+15 → +45
1.8 → 8.0
2.5 → 11.0
aut.
240
2
017-523666
RT 102
D
+25 → +90
2.4 → 10.0
3.5 → 20.0
aut.
300
2
017-514766
RT 34
B
-25 → +15
2.0 → 10.0
2.0 → 12.0
aut.
100
RT 7
A
-25 → +15
2.0 → 10.0
2.5 → 14.0
aut.
150
2
017-505366
017-511866
RT 14
A
-5 → +30
2.0 → 8.0
2.0 → 10.0
aut.
150
2
017-509966
RT 101
A
+25 → +90
2.4 → 10.0
3.5 → 20.0
aut.
300
2
017-500366
RT 107
A
+70 →+150
6.0 → 25.0
1.8 → 8.0
aut.
215
2
017-513566
1)
The sensor must be located colder than thermostat housing and capillary tube. 2) The sensor can be located warmer or colder than thermostat housing. 3) The sensor must be
located warmer than thermostat housing and capillary tube. 4) With built-in heating coil - reduces the thermal differential.
Type of bulb / sensor
A
B
C
D
Cylindrical
remote sensor
Room sensor
Duct sensor
Capillary
tube sensor
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure controls and thermostats – RT
43
Overview RT thermostats
-50
0
+50
+100
+150
+200
+250
+300°C
Range °C
-60 → -25
RT 10
-45 → -15
RT 9
-30 → 0
RT 13
-25 → +15
RT 3
-25 → +15
RT 2,7
-20 → +12
RT 8
-5 → +10
RT 12
-5 → +30
RT 14
+5 → +22
RT 23
+8 → +32
RT 15
Vapour-charged with remote bulb
(bulb coldest)
Adsorption-charged with remote bulb
(bulb warmest or coldest)
Type
+15 → +34 RT 24
+15 → +45 RT 140
+25 → +90 RT 101, 102
+70 → +150 RT 107
Partial charge with remote bulb (bulb warmest)
Vapour-charged with coiled capillary tube sensor
(room thermostats)
Adsorption-charged with coiled capillary tube sensor (room thermostats)
Adsorption-charged dead zone thermostats with remote bulb
(bulb warmest or coldest)
-50 → -15
RT 17
-30 → 0
RT 11
-5 → +30
RT 4
-25 → +15
RT 34
-20 → +12
RT 8L
-5 → +30
RT 14L
+15 → +45 RT 140L
0 → +38
RT 16L
-30 → +40
RT 270
Vapour-charged dead zone thermostat (room thermostat)
Vapour-charged differential thermostats with remote bulb (bulb warmest or coldest)
-50
0
+50
+100
+150
+200
+250
+300°C
Technical data and ordering: RT pressure controls
Safety pressure controls w EN 12263 / DIN 32733 appr. and CE marked acc. PED, Pressure Equipment Directive
Pressure
Type
bar
RT 36B2)
0 → 2.5
max. 0.2
RT 36S2)
0 → 2.5
max. 0.2
2)
3)
Max.
test
pressure p’
Code no.
Connection
bar
bar
1/4 in./
6mm
flare
man.
22
25
017-525866
man.
22
25
017-525966
cutting ring
∅ 6 mm
G 3/8 A 1) +
weld nipple
∅ 6.5/10
mm
G1/2 A 1)
5 → 25
2.0 - 3.0
aut.
34
38
017-503166
max. 1.0
man.
34
38
017-503466
RT 6S2)
10 → 28
max. 1.0
man.
34
38
017-507566
RT30AW3)
1 → 10
0.2 - 0.8
aut.
22
25
017-518766
3)
1 → 10
max. 0.4
man.
22
25
017-518866
RT30AS3)
1 → 10
max. 0.4
man.
22
25
017-519966
RT30AB
5 → 25
2.0 - 3.0
aut.
34
38
017-513166
017-503266
3)
10 → 28
max. 1.5
man.
34
38
017-513366
017-503566
RT6AS3)
10 → 28
max. 1.5
man.
34
38
017-514666
017-507666
RT6AB
3)
BSP ext. thread, ISO 228/1.
Pressure controls for fluorinated refrigerants.
Pressure controls for R 717 (NH3) and fluorinated refrigerants.
G R U P A
1)
Max.
working
pressure
PB
10 → 28
2)
RT6AW
High
Reset
RT 6B2)
RT 6W
High
Differential
(fixed)
Δp
bar
High
High
Regulation
range
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
44
Technical data and ordering: RT pressure controls
Pressure controls with adjustable dead zone for R717 (NH3) and fluorinated refrigerants
Pressure
Type
RT 1AL2)
Low
Regulation
range
Differential
Δp
Dead
zone
NZ
Δp
Max.
working pressure
PB
Max.
test
pressure p’
G 3/8 A 1) +
weld nipple
∅ 6.5/10 mm
bar
bar
bar
bar
bar
-0.8 → 5
fixed 0.2
0.2 → 0.9
22
25
017L001666
017L003366
017L0017664)
017L0040664)
0.2 → 6
fixed 0.25
0.25 → 0.7
22
25
4 → 17
fixed 0.35
0.35 → 1.4
22
25
RT 117L3)
10 → 30
fixed 1.0
1 → 3.0
42
47
High
Connection
cutting ring
∅ 6 mm
RT 5AL2)
RT 200L
3)
Code no.
017L003266
017L0042664)
1)
BSP ext. thread, ISO 228/1.
Pressure controls for R 717 (NH3) and fluorinated refrigerants.
3)
Pressure controls for fluorinated refrigerants.
4)
Without nipple.
2)
Differential pressure controls for R 717(NH3) and fluorinated refrigerants
Type
Regulation range
2)
3)
Operating range
for LP bellows
Max.
working pressure
PB
Max.
test
pressure p’
Code no.
Connection
G 3/8 A 1) + weld
nipple
∅ 6.5/10 mm
017D002166
bar
bar
bar
bar
bar
cutting ring
∅ 6 mm
0.5 → 4
fixed 0.3
-1 → 18
22
25
017D001466
0.5 → 4
fixed 0.3
-1 → 18
22
25
0.5 → 6
fixed 0.5
-1 → 36
42
47
017D001566
017D002366
1.5 → 11
fixed 0.5
-1 → 31
42
47
017D001666
017D002466
RT 252A
0.1 → 1.5
fixed 0.1
-1 → 9
22
13
017D001366
017D002566
RT 2653)
1→6
fixed 0.5
-1 → 36
42
47
RT 260A
1)
Differential
Δp
017D0022662)
017D007266
BSP ext. thread, ISO 228/1.
Man. reset.
Filter monitor: Alarm ∆p = 0.8 bar, cut-out ∆p = 1 bar (factory setting).
Differential pressure controls with adjustable dead zone for R 717(NH3) and fluorinated refrigerants
Type
Regulation range
RT 262 AL
1)
2)
Differential
Δp
Dead
zone
NZ
Operating range
for LP bellows
Max.
working pressure
PB
Max.
test
pressure p’
bar
bar
bar
bar
bar
bar
0.1 → 1.5
fixed 0.1
-1 → 0.33
-1 → 9
11
13
Code no.
Connection
G 1/2 A 1) + weld
nipple
∅ 6.5/10 mm
017D0043662)
BSP ext. thread, ISO 228/1.
Differential pressure control for R 717 (NH3) and fluorinated refrigerants.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure controls and thermostats – RT
45
KVP Evaporator pressure regulator
The KVP is mounted in the suction line after the evaporator and is maintaining a constant evaporating
pressure and thereby a constant surface temperature on the evaporator. The regulation is modulating.
By throttling in the suction line, the amount of refrigerant gas is matched to the evaporator load.
Features
ures
Accurate, adjustable pressure regulation
with allen key
"Hermetic" brazed construction
Stainless steel bellows
Compact angle design for easy
installation in any position
Pulsation damping design
1
/4 in. Schrader valve
for pressure testing
Available with flare and
ODF solder connections
Applications
pplications
· Traditional refrigeration
· Air conditioning units
· Transport refrigeration
Advantages
· The KVP can also be used to differentiate the evaporating pressures in two
or more evaporators in systems with
one compressor.
Facts
· Wide capacity and operating range
· Regulation range: 0 to 5.5 bar
· For use with CFC, HCFC and HFC
refrigerants
G R U P A
· Protection against too low an evaporating pressure (e.g. as protection
against freezing in a water chiller). The
regulator closes when the pressure
in the evaporator falls below the set
value.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
46
Technical data and ordering
Evaporating pressure regulator
Type
R22
Rated capacity in kW 1)
R134a
R404A/R507
R407C
KVP 12
4.0
2.8
3.6
3.7
KVP 15
KVP 22
4.0
4.0
2.8
2.8
3.6
3.6
3.7
3.7
KVP 28
8.6
6.1
7.7
7.9
Flare connection 2) 3)
in.
mm
½
12
KVP 35
8.6
6.1
7.7
7.9
1)
Rated capacity is the capacity of the regulator at
– Evaporating temperature te = −10°C,
– Condensing temperature tc = +25°C
– Pressure drop in regulator Δp = 0.2 bar, offset = 0.6 bar
2)
Supplied without flare nuts. Separate flare nuts can be supplied:
½ in./12 mm, code no. 011L1103, 5/8 in./16 mm, code no. 011L1167.
5/8
3)
4)
Solder connection 3)
Code no. 4)
in.
mm
034L0021
½
034L0023
12
034L0028
16
034L0022
5/8
16
034L0029
7/8
22
034L0025
11/8
034L0026
28
034L0031
13/8
35
034L0032
The connection dimensions chosen must not be too small, since
gas velocities in excess of 40 m/s at the inlet of the regulator can
give flow noise.
Code numbers in bold are normally on stock and a shorter
delivery time can therefore be expected.
Code no. 4)
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure regulators – KVP
47
KVR and NRD condensing pressure regulators
Regulator system KVR and NRD is used to maintain a constant and sufficiently high condenser and
receiver pressure in refrigeration and air conditioning plant with air-cooled condensers.
KVR can also be used together with receiver pressure regulator type KVD.
Features
Accurate, adjustable pressure regulation
with allen key
"Hermetic" brazed construction
Stainless steel bellows
Compact angle design for easy
installation in any position
Pulsation damping design
1/4 in. Schrader valve
for pressure testing
Available with flare and
ODF solder connections
Applications
Advantages
Facts
· Traditional refrigeration
· The valves are the most compact one
on the market.
· Wide capacity and operating range
· Excellent performance because of balance port design (equalization of force
on port)
· For use with CFC, HCFC and HFC
refrigerants
· Air conditioning units
· Transport refrigeration
· Regulation range: 5 to 17.5 bar
· Very easy to adjust the KVR
· The NRD is non-adjustable – it always
follows the actual pressure in the
system
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
48
d.o.o.
· Reliable design
G R U P A
· The refrigeration system can operate
with very large load variations
Technical data and ordering
Condensing pressure regulator
Type
KVR 12
KVR 15
KVR 22
KVR 28
Evaporator capacity
Flare
connection 2) 3)
Rated liquid capacity in kW 1)
Rated hot gas in kW 1)
R404A/
R22 R134a R404A/
in.
mm
R507 R407C R22 R134a R507 R407C
½
12
50.4
47.3
36.6
54.4
13.2
11.6
12.0
14.3
129
121
93.7
139.3
34.9
30.6
34.9
37.7
KVR 35
2)
Rated capacity is the capacity of the regulator at
– Evaporating temperature te = –10°C,
– Condensing temperature tc = +30°C
– Pressure drop in regulator ∆p =
· liquid line dp = 0,2 bar
· hotgas line dp = 0,4 bar
· offset = 3 bar
Supplied without flare nuts. Separate flare nuts can be supplied:
½ in./12 mm, code no. 011L1103, 5/8 in./16 mm, code no. 011L1167.
16
Solder
connection 3)
in.
034L0091
034L0092
5/8
7/8
11/8
12
16
22
28
35
12
3)
4)
Code no. 4)
mm
½
13/8
½
NRD
1)
5/8
Code no. 4)
034L0093
034L0096
034L0097
034L0094
034L0095
034L0099
034L0100
020-1132
020-1136
The connection dimensions chosen must not be too small, since
gas velocities in excess of 40 m/s at the inlet of the regulator can
give flow noise.
Code numbers in bold are normally on stock and a shorter
delivery time can therefore be expected.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure regulators – KVR and NRD
49
KVL compressor overload protection
Crankcase pressure regulator type KVL is fittet into the suction line ahead of the compressor. The KVL
protects the compressor motor against overload during start-up after long standstill period or after
defrost periods (high pressure in evaporator).
Features
Accurate, adjustable pressure regulation
with allen key
"Hermetic" brazed construction
Stainless steel bellows
Pulsation damping design
Compact angle design for easy
installation in any position
Available with flare and
ODF solder connections
Applications
pplications
Advantages
Facts
· Traditional refrigeration
· Wide capacity and operating range
· Air conditioning units
· Unaffected by ambient pressure
variations
· Transport refrigeration
· Bellows welded to the body for
· For use with CFC, HCFC and HFC
refrigerants
long lifetime
· Regulation range: 0.2 to 6 bar
· Accurate, adjustable pressure
regulation
G R U P A
· Easy adjustment before start up
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
50
Technical data and ordering
Crankcase pressure regulator
Type
R22
Rated capacity in kW 1)
R134a
R404A/R507
R407C
KVL 12
7.1
5.3
6.3
6.4
KVL 15
KVL 22
KVL 28
7.1
7.1
17.8
5.3
5.3
13.2
6.3
6.3
15.9
6.5
6.5
16.4
KVL 35
17.8
13.2
15.9
16.4
1)
2)
Flare connection 2) 3)
in.
mm
½
12
Rated capacity is the capacity of the regulator at
– Evaporating temperature te = –10°C,
– Condensing temperature tc = +25°C
– Pressure drop in regulator ∆p = 0.2 bar
Supplied without flare nuts. Separate flare nuts can be supplied:
½ in./12 mm, code no. 011L1103, 5/8 in./16 mm, code no. 011L1167.
5/8
16
3)
4)
Code no. 4)
034L0041
034L0042
Solder connection 3)
in.
mm
½
12
5/8
16
7/8
22
11/8
28
13/8
35
Code no. 4)
034L0043
034L0048
034L0049
034L0045
034L0046
034L0051
034L0052
The connection dimensions chosen must not be too small, since
gas velocities in excess of 40 m/s at the inlet of the regulator can
give flow noise.
Code numbers in bold are normally on stock and a shorter
delivery time can therefore be expected.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure regulators – KVL
51
KVD Receiver pressure regulator
KVD is a modulating pressure regulator. It opens on falling receiver pressure and bypasses hot gas to
maintain the receiver pressure at the regulator setting (adjustable).
KVD and KVR form a regulating system, used to maintain constant and adequately high condensing and
receiver pressure in plant with heat-recovery, and in refrigeration and air conditioning plant with aircooled condensers.
Features
Accurate, adjustable pressure regulation
with allen key
"Hermetic" brazed construction
Stainless steel bellows
Compact angle design for easy
installation in any position
Pulsation damping design
1/4 in. Schrader valve
for pressure testing
Available with flare and
ODF solder connections
Applications
Advantages
Facts
· Traditional refrigeration
· The regulator is equipped with an
effective damping device (9) against
pulsations which can normally arise in
a refrigeration plant.
· Wide capacity and operating range
· Air conditioning units
· Max. working pressure PS = 28 bar
· Can be used as a relief valve from high
pressure to suction side
· For use with CFC, HCFC and HFC
refrigerants
G R U P A
· KVD regulations is only dependent
upon the outlet pressure. Pressure
variations on the inlet side of the
regulator do not affect the degree of
opening since KVD is equipped with
an equalization bellows.
· Regulation range: 3 to 20 bar
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
52
Technical data and ordering
Receiver pressure regulators
Type
KVD 12
KVD 15
1)
2)
3)
kv value
m3/h 1)
1.75
1.75
1.75
Flare connection 2) 3)
in.
mm
½
12
034L0171
5/8
034L0172
16
Code no.
Solder connection 3)
in.
mm
½
12
5/8
16
Code no.
034L0173
034L0176
034L0177
The kv value is the flow of water in m3/h at a pressure drop across
valve of 1 bar, ρ = 1000 kg/m3.
Supplied without flare nuts. Separate flare nuts can be supplied:
½ in./12 mm, code no. 011L1103, 5/8 in./16 mm, code no. 011L1167.
The connection dimensions chosen must not be too small, since
gas velocities in excess of 40 m/s at the inlet of the regulator can
give flow noise.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure regulators – KVD
53
KVC Capacity regulator
KVC is a capacity regulator used for the adaption of the compressor capacity to the actual evaporator
load. Placed in a bypass between high- and low pressure sides of the refrigeration system, KVC imposes
a lower limit on the compressor suction pressure by supplying the low pressure side with replacement
capacity in the form of hot gas/cool gas from the high pressure side.
Features
Accurate, adjustable pressure regulation
with allen key
"Hermetic" brazed construction
Stainless steel bellows
Compact angle design for easy
installation in any position
Pulsation damping design
Available with flare and
ODF solder connections
Applications
Advantages
Facts
· Traditional refrigeration
· KVC regulations is only dependent
upon the outlet pressure. Pressure
variations on the inlet side of the
regulator do not affect the degree of
opening since KVC is equipped with
an equalization bellows.
· Wide capacity and operating range
· Air conditioning units
· Transport refrigeration
· Maximum working pressure PS = 28 bar
· The damping device to ensure long
life for the regulator
· For use with CFC, HCFC and HFC
refrigerants
G R U P A
· The regulator is also equipped with
an effective damping device against
pulsations which can normally arise in
a refrigeration plant.
· Regulation range: 0,2 to 6 bar
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
54
Technical data and ordering
Capacity regulators
Type
R22
Rated capacity in kW 4)
R134a R404A/R507
R407C
KVC 12 3)
7.6
4.8
6.9
8.4
KVC 15 3)
KVC 22 3)
14.9
19.1
9.4
12.0
13.6
17.4
16.4
21.0
1)
2)
Flare connection 1) 2)
in.
mm
½
12
Supplied without flare nuts. Separate flare nuts can be supplied:
½ in./12 mm, code no. 011L1103, 5/8 in./16 mm, code no. 011L1167.
The connection dimensions chosen must not be too small, since
gas velocities in excess of 40 m/s at the inlet of the regulator can
give flow noise.
5/8
16
3)
4)
Code no.
034L0141
034L0142
Solder connection 2)
in.
mm
½
12
5/8
16
7/8
22
Code no.
034L0143
034L0146
034L0147
034L0144
If the discharge tube temperature becomes too high in relation to
the compressor specification, the installation of an injection valve
in a bypass between liquid line and compressor suction line is
recommended.
Rated capacity is the capacity of the regulator at:
– Evaporating temperature te = –10°C,
– Condensing temperature tc = +25°C
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure regulators – KVC
55
CPCE capacity regulator
CPCE capacity regulators adapt compressor capacity to actual evaporator load. They are designed for
installation in a bypass line between the low and high pressure sides of the refrigeration system, for hot
gas injection between evaporator and thermostatic expansion valve. Injection should be arranged to
occur through an LG liquid-gas mixer.
Features
Easy and exact adjustment
Pilot pressure connection
Pilot orifice
Main orifice for pricise
opening and closing
Flare or solder connections
Advantages
Facts
· Traditional refrigeration
· Avoids high suction superheats by
combining hot gas injection with
expansion valve characteristics
· The regulator increases evaporator gas
velocity thus ensuring better oil return
to compressor
· Protection against too low an evaporating temperature, i.e. avoids evaporator icing
· Direct connection to system suction
line regulates hot gas injection independent of evaporator pressure drop
· LG can be used for hot gas defrosting
or reverse cycle systems
· LG provides homogenous mixing
of the liquid and hot gas refrigerant
injected into the evaporator
· Air conditioning units
· Can be used for CFC, HCFC and HFC
refrigerants
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
56
d.o.o.
· Max. working pressure PS = 28 bar
G R U P A
Applications
Technical data and ordering
Capacity regulators
Rated capacity in kW 1)
R22
R134a R404A/R507 R407C
CPCE 12
17.4
7.9
16.4
19.0
CPCE 12
17.4
7.9
16.4
19.0
CPCE 15
25.6
11.6
24.2
27.9
CPCE 22
34.0
15.2
32.0
37.1
1)
Rated capacity is the capacity of the regulator at:
– Evaporating temperature te = –10°C,
– Condensing temperature tc = +30°C
– Reduction of suction temperature/pressure ∆ts = CPCE: 4 K.
Type
Flare connection
in.
mm
½
12
Solder connection
in.
mm
½
5/8
7/8
12
16
22
Code no.
034N0081
034N0082
034N0083
034N0084
Liquid-gas mixer
Type
LG 12-16
LG 12-22
LG 16-28
LG 22-35
Expansion valve
ODM
in.
mm
5/8
16
7/8
22
11/8
28
13/8
35
Connection
Hot gas
ODF
in.
½
½
5/8
7/8
mm
12
12
16
22
Liquid distributor
ODF
in.
mm
5/8
16
7/8
22
11/8
28
13/8
35
Code no.
069G4001
069G4002
069G4003
069G4004
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Capacity regulator – CPCE
57
Modularity, flexibility and unique features
Danfoss’ extensive experience has been used to create a new valve concept which sets new and improved standards with respect to the demands required from control and injection valves.
ICM valves are manufactured with a series of unique features.
Features
Magnetic
coupling
Stainless steel
shield
Spindle
Regulating cone
Valve seat
Advantages and features
Facts
· Designed for industrial refrigeration applications for a
maximum working pressure of 52 bar/754 psig.
· Refrigerants:
Applicable to all common refrigerants including R717 and
R744 (CO2) and non- corrosive gases/liquids.
Use with flammable hydrocarbons cannot be recommended; please contact Danfoss.
· Modular Concept
· Each valve body is available with several different
connection types and sizes
· Valve overhaul is performed by replacing the function
module
· Possible to convert ICM motor valve to ICS servo valve.
· Low weight and compact design.
· Low temperature steel body
· Direct coupled connections
· V-port regulating cone ensures optimum regulating
accuracy particularly at part load.
· Manual opening possible via ICAD or Multifunction
tool.
· Surface protection
The external surface is zinc-chromated to provide good
corrosion protection.
· Pressure range
The valve is designed for:
Max. working pressure: 52 bar g (754 psig)
· Max. openening pressure differential (MOPD)
– ICM 20-32: 52 bar (750 psi)
– ICM 40:
40 bar (580 psi)
– ICM 50:
30 bar (435 psi)
– ICM 65:
20 bar (290 psi)
· Magnet coupling - real hermetic sealing.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
58
d.o.o.
· Cavitation resistant valve seat.
G R U P A
Connection types include butt weld, socket weld, solder
and threaded connections.
· Temperature range
–60/+120°C (–76/+248°F).
The ICM concept
The ICM concept is developed around a modular principle. This gives the possibility of combining function modules and top covers with valve bodies, which are available in many different sizes and with a
variety of connection possibilities.
The valve body
There are six valve bodies available.
ICV 20
ICV 25
ICV 32
ICV 40
ICV 50
ICV 65
Each valve body is available with a range of
undersized through oversized connection sizes
and types.
The function
module / top cover
D
A
J
SOC
SD
SA
FPT
Butt-weld DIN
Butt-weld ANSI
Butt-weld JIS
Socket weld ANSI
Solder DIN
Solder ANSI
Female Pipe Thread
Each body may be fitted with multiple function
module / top cover to give different capacities.
Type
Valve body
size
Kv
Cv
(m3/h)
(USgal/min)
0.6
0.7
2.4
2.8
ICM20-C
4.6
5.3
ICM25-A
6
7.0
12
13.9
ICM20-A
ICM20-B
ICM25-B
ICM32-A
ICM32-B
ICM40-A
ICM40-B
ICM50-A
ICM50-B
ICM65-B
The actuator
20
25
32
40
50
65
9
10.4
17
20
15
17
26
30
23
27
40
46
70
81
A magnetic coupled actuator is easily installed.
Two actuators cover the entire ICM program
G R U P A
ICAD 900
d.o.o.
ICAD 600
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Motor valves – ICM 20-65
59
Quick selection of ICM valves
Suction line (capacity in kW)
Refrigerant
R 717
–40°C
Type
R 744
–10°C
–50°C
R 407C
–30°C
R 404A
–5°C
5°C
–40°C
–10°C
Kv value
(m3/h)
∆p bar
ICM 20-A
ICM 20-B
DN20
ICM 20-C
ICM 25-A
ICM 25-B
ICM 32-A
ICM 32-B
ICM 40-A
ICM 40-B
ICM 50-A
ICM 50-B
ICM 65-B
DN25
DN32
DN40
DN50
DN65
0.1
0.2
0.2
0.2
0.2
0.2
0.1
0.2
1.4
4
2.1
3.1
1.65
2.4
0.45
1.3
5.6
16.2
8.3
12
6.5
7.6
1.8
5
2.4
10.8
31
16
23
12.5
14.2
3.4
10
4.6
14.1
40
21
31
16.5
18.5
4.5
13
6
28.2
81
42
61
31
37
9
26
12
21.2
61
31
46
23
28
6.5
19
9
40
115
59
86
43
52
12.5
36
17
35.3
101
52
76
37
46
11
32
15
61.2
175
90
132
65
79
19
56
26
54
155
80
117
57
70
16.5
49
23
0.6
94
270
138
203
99
122
30
86
40
164
472
241
355
174
213
51
150
70
5°C
–40°C
–10°C
Kv value
(m3/h)
0.2
Liquid line (capacity in kW)
Refrigerant
R 717
Type
R 744
R 407C
–5°C
R 404A
–40°C
–10°C
–50°C
–30°C
0.2
0.2
0.2
0.2
0.2
0.2
0.2
62
64
15
15.4
13.5
13.9
7.2
9
0.6
249
255
60
62
54
56
29
34
2.4
4.6
∆p bar
ICM 20-A
ICM 20-B
DN20
ICM 20-C
478
489
115
118
103
107
55
65
ICM 25-A
624
638
150
154
135
139
72
85
6
1248
1277
300
308
270
278
143
170
12
ICM 25-B
ICM 32-A
ICM 32-B
ICM 40-A
ICM 40-B
ICM 50-A
ICM 50-B
ICM 65-B
DN25
DN32
DN40
DN50
DN65
936
958
225
231
202
208
107
128
9
1769
1809
425
436
381
393
203
241
17
1561
1596
375
385
337
347
179
213
15
2705
2767
650
667
584
602
310
369
26
2393
2447
575
590
516
532
274
327
23
4162
4256
1000
1026
898
926
477
568
40
7284
7449
1750
1796
1571
1654
835
994
70
–5°C
5°C
–40°C
–10°C
Kv value
(m3/h)
Hot gas line (capacity in kW)
Refrigerant
R 717
R 744
R 407C
R 404A
–40°C
–10°C
–50°C
–30°C
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
6.4
6.9
3.8
4.2
2.97
3.3
1
2
0.6
25
28
15.5
17
12.2
11
6
7
2.4
ICM 20-C
48
53
29
32
19.9
21
11
13
4.6
ICM 25-A
64
69
38
41
26
27
15
18
6
126
139
76
83
52
54
29
35
12
Type
∆p bar
ICM 20-A
ICM 20-B
ICM 25-B
ICM 32-A
ICM 32-B
ICM 40-A
ICM 40-B
ICM 50-B
ICM 65-B
DN25
DN32
DN40
DN50
DN65
95
104
57
62
39
41
22
26
9
180
196
108
117
73
77
42
50
17
157
173
95
104
65
68
37
44
15
272
300
165
180
112
119
64
76
26
240
266
146
159
99
105
56
67
23
420
462
254
276
172
182
98
117
40
735
809
443
484
302
309
172
205
70
Conditions: R717, R404A, R407C: tliq = 30°C, R744: tliq = 10°C
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
60
d.o.o.
Please note:
For proper selection of the ICM motor valve Danfoss recommend that you use the technical leaflet (DKRCI.PD.HT0.A) or the
Danfoss calculation Software DIRCalcTM. The sofware is free of charge. Please contact your local Danfoss sales office.
G R U P A
ICM 50-A
DN20
Ordering the ICM valve
ICM 20
ICM 25-65
Type
ICM 20-A
ICM 20-B
ICM 20-C
ICM 25-A
ICM 25-B
ICM 32-A
ICM 32-B
Code no.
Code no.
027H3000
027H3012
027H3001
027H3006
027H3007
027H3006
027H3008
027H3007
027H3009
Operates with ICAD 600 actuator (not included)
Connection
Butt-weld
DIN
Code no.
Code no.
Code no.
DN 20
027H1030
027H1031
027H1032
DN 25
027H1020
027H1021
027H1022
DN 32
DN 40
22 mm
28 mm
35 mm
7/8” SA
1 1/8” SA
1 3/8” SA
1 5/8” SA
Solder
DIN & ANSI
Type
027H1045
027H1046
027H1047
027H1050
027H1051
027H1052
ICM 40-A
ICM 40-B
Code no.
Code no.
027H2000
027H2001
027H2016
027H2006
027H2008
027H2014
027H2010
027H2012
ICM 50-A
027H2007
027H2009
027H2011
027H2013
ICM 50-B
ICM 65-B
Operates with ICAD 900 actuator (not included)
Connection
Butt-weld
DIN
ICAD 600
027H4001
DN 50
027H4010
Code no.
Code no.
027H5000
027H5001
027H5008
027H4008
027H6001
027H4009
027H5006
027H5007
027H6009
027H4006
027H4007
027H5006
027H5007
027H6007
Supply voltage
24 V d.c.
Load
Input
1.2 A
0/4-20 mA
2.0 A
0/2-10 V
Functions
for ICM 20-32
Featuring a magnetic coupling for manual operation of the ICM and a threaded
end for dismounting of the ICS function module and other useful functions.
Output
0/4-20 mA
Code no.
027H1200
027H1201
Code no.
027H0180
027H0181
Can be ordered as parts programme (separate ordering of valve body, function / top cover and actuator).
Please contact your local Danfoss sales company for more information.
G R U P A
Service Tool
for ICM 40-65
Code no.
ICAD 900
Actuator type
ICAD 900
Code no.
027H4000
DN 65
42 mm
54 mm
76 mm
1 5/8” SA
2 1/8” SA
2 5/8” SA
Solder
DIN & ANSI
ICAD 600
Code no.
DN 40
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Motor valves – ICM 20-65
61
Modularity, flexibility and unique features
Danfoss’ extensive experience has been used to create a new valve concept which sets new and improved standards with respect to the demands required from control and injection valves.
ICS valves are manufactured with a series of unique features.
Features
Servo Piston
Regulating cone
Valve seat
Closed position
Advantages and features
· Designed for industrial refrigeration applications for a
maximum working pressure of 52 bar/754 psig.
· Modular Concept
· Each valve body is available with several different
connection types and sizes
· Valve overhaul is performed by replacing the function
module
· Possible to convert ICS servo to ICM motor valve
· Low weight and compact design.
· Low temperature steel body
· Direct coupled connections
· Refrigerants:
Applicable to all common refrigerants including R717 and
R744 (CO2) and non- corrosive gases/liquids.
Use with flammable hydrocarbons cannot be recommended; please contact Danfoss.
· Temperature range
–60/+120°C (–76/+248°F).
· Surface protection
The external surface is zinc-chromated to provide good
corrosion protection.
· Pressure range
The valve is designed for:
Max. working pressure: 52 bar g (754 psig)
· V-port regulating cone ensures optimum regulating
accuracy particularly at part load.
· Manual operating spindle.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
62
d.o.o.
· The ICS valve is a multifunction valve where 1 or up to 3
pilot valves can be mounted into the pilot ports.
G R U P A
Connection types include butt weld, socket weld, solder
and threaded connections.
Facts
The ICS concept
The ICS concept is developed around a modular principle. This gives the possibility of combining function
modules and top covers with valve bodies, which are available in many different sizes and with a variety of
connection possibilities.
The valve body
There are five valve bodies available.
ICS 25
ICS 32
ICS 40
ICS 50
ICS 65
Each valve body is available with a range of
undersized through oversized connection sizes
and types.
D
A
J
SOC
SD
SA
FPT
Butt-weld DIN
Butt-weld ANSI
Butt-weld JIS
Socket weld ANSI
Solder DIN
Solder ANSI
Female Pipe Thread
The top cover
Each valve body may be fitted with a 1 pilot or 3
pilot top cover.
The function
module
In ICS, multiple inserts (function modules) are
available to give different capacities.
Type
Valve body
size
Kv
(m3/h)
ICS25-5
1.7
ICS25-10
ICS25-15
3.5
25
6.0
8
ICS25-25
11.5
ICS32
32
17
ICS40
40
27
ICS50
50
44
ICS65
65
70
G R U P A
ICS25-20
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pilot controlled servo valves – ICS 25-65
63
Quick selection of ICS valves
Suction line
Capacity [kW x 10]
Capacity [kW]
15
90
Example:
R407C - suction line
Qo = 23 kW
to = 0°C
40
14
13
80
12
ICS 25-25
70
ICS 65
11
30
10
60
9
Result:
Both ICS 25-20
and ICS 25-25
can be used.
50
ICS 25-20
8
20
7
ICS 50
40
6
ICS 25-15
5
30
ICS 40
4
Hot gas line
ICS 32
2
10
ICS 25-5
1
0.16
0.18
0.2
0.3
Δp [bar]
0.1
0.12
0.14
0.16
0.18
0.2
0.3
Δp [bar]
0.1
0.12
0.14
0.16
0.18
0.2
0.3
Δp [bar]
Capacity [kW]
R404A
Capacity [kW x 100]
R407C
R404A
Capacity [kW x 10]
R407C
0.14
R717
0.12
R717
R407C
0.1
R404A
0
0
R404A
0
R717
Liquid line
ICS 25-10
3
R717
Condensing temperature:
tc = +32°C
tliq = +30°C
10
20
R407C
Conditions:
Evaporating temperature:
R717
to = –10°C
R407C
to = 0°C
R404A
to = –40°C
0.1
0.12
0.14
0.16
0.18
0.2
0.3
Δp [bar]
Capacity [kW x 10]
90
25
35
85
80
ICS 65
30
75
20
70
65
25
60
55
15
20
50
ICS 50
45
40
15
10
35
30
ICS 40
10
25
5
ICS 32
15
5
10
5
0.16
0.18
0.2
0.3
Δp [bar]
0
R404A
0.14
R407C
0.12
R717
R404A
R407C
R717
0
0.1
0.1
0.12
0.14
0.16
0.18
0.2
0.3
Δp [bar]
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]rigo.hr
d.o.o.
The capacities in the range 0.1 bar to 0.2 bars are approx. values.
For proper selection of the ICS valve Danfoss recommend that you use the technical leaflet (DKRCI.PD.HS0.A) or the
Danfoss calculation Software DIRCalcTM. The sofware is free of charge. Please contact your local Danfoss sales office.
64
G R U P A
20
Ordering the ICS valve
1 pilot
3 pilots
Available connections
ICS 25-5
ICS 25-10
ICS 25-15
ICS 25-20
ICS 25-25
ICS 25-5
ICS 25-10
ICS 25-15
ICS 25-20
ICS 25-25
20 D (3/4 in.)
25 D (1 in.)
027H2028
027H2078
027H2038
027H2088
027H2048
027H2098
027H2058
027H2108
027H2068
027H2118
027H2020
027H2070
027H2030
027H2080
027H2040
027H2090
027H2050
027H2100
027H2060
027H2110
22 SD (7/8 in.)
20 A (3/4 in.)
25 A (1 in.)
1 Pilot
027H2023
027H2029
027H2021
027H2140
3 Pilots
027H2073
027H2079
027H2071
027H2145
1 Pilot
3 Pilots
1 Pilot
3 Pilots
1 Pilot
3 Pilots
1 Pilot
3 Pilots
027H2033
027H2083
027H2043
027H2093
027H2053
027H2103
027H2063
027H2113
027H2039
027H2089
027H2049
027H2099
027H2059
027H2109
027H2031
027H2081
027H2041
027H2091
027H2051
027H2101
027H2061
027H2111
027H2141
027H2146
027H2142
027H2147
027H2143
027H2148
40 D (11/2 in.)
1 Pilot
32 D (11/4 in.)
027H3020
3 Pilots
027H3030
1 Pilot
3 Pilots
1 Pilot
3 Pilots
1 Pilot
3 Pilots
1 Pilot
3 Pilots
1 Pilot
3 Pilots
32 D (11/4 in.)
40 D (11/2 in.)
35 SD (13/8 in. SA)
32 A (11/4 in. )
20 SOC (3/4 in.)
28 SA (11/8 in.)
22 SA (7/8 in.)
28 SD (11/8 in.)
027H2026
027H2076
027H2036
027H2086
027H2046
027H2096
027H2056
027H2106
027H2066
027H2116
027H2025
027H2075
027H2035
027H2085
027H2045
027H2095
027H2055
027H2105
027H2065
027H2115
027H2024
027H2074
027H2034
027H2084
027H2044
027H2094
027H2054
027H2104
027H2064
027H2114
25 SOC (1 in.)
20 FPT (3/4 in. )
25 FPT (1 in. )
40 A (11/2 in.)
027H2062
027H2112
Available connections
ICS 32
42 SA (15/8 in.)
42 SD (15/8 in.)
35 SD (13/8 in. SA)
027H3023
32 A (11/4 in.)
027H3021
32 SOC (11/4 in.)
027H3022
027H3033
027H3031
027H3032
50 A (2 in.)
Available connections
40 D (11/2 in.)
ICS 40
1 Pilot
027H4020
027H4024
027H4023
40 A (11/2 in.)
027H4021
40 SOC (11/2 in.)
027H4022
3 Pilots
027H4030
027H4034
027H4033
027H4031
027H4032
50 A (2 in.)
50 D (2 in.)
42 SA (15/8 in.)
42 SD (15/8 in.)
Available connections
ICS 50
65 D (21/2 in.)
54 SD (21/8 in. SA)
65 A (21/2 in.)
1 Pilot
027H5020
027H5023
027H5021
50 SOC (2 in.)
027H5022
3 Pilots
027H5030
027H5033
027H5031
027H5032
50 D (2 in.)
ICS 65
65 A (21/2 in.)
65 SOC (21/2 in.)
1 Pilot
67 SA (25/8 in.)
76 SD (3 in.)
027H6020
027H6021
3 Pilots
027H6030
027H6031
027H6023
027H6025
027H6024
027H6033
027H6035
027H6034
80 D (3 in.)
80 A (3 in.)
G R U P A
Available connections
65 D (21/2 in.)
65 J (21/2 in.)
d.o.o.
Can be ordered as parts programme (separate ordering of valve body, top cover and function module).
Please contact your local Danfoss sales company for more information.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pilot controlled servo valves – ICS 25-65
65
ICS application examples
There are several combination possibillieties; here you will see an overview of the most important ICS application possibillities.
Example no. 1-1
Products
Constant pressure regulation.
–0.66 to 7 bar g
(19.5 in. Hg to 102 psig).
1 × ICS 1 Pilot
1 × CVP (LP)
Example no. 1-2
Products
1 × ICS 1 Pilot
1 × CVPP (LP)
Differential pressure regulation.
0 to 7 bar g (0 to 102 psig).
Example no. 1-5
Products
On/off regulation (solenoid
valve).
1 × ICS 1 Pilot
1 × EVM
1 × coil
Example no. 1-11
Products
Electronically controlled media
temperature regulation.
–1 to 8 bar g
(0 in. Hg to 116 psig).
1 × ICS 1 Pilot
1 × CVQ
Example no. 3-1
Products
Constant pressure regulation
combined with electrical shut
off.
–0.66 to 7 bar g
(19.5 in. Hg to 102 psig).
1 × ICS 3 Pilots
1 × blanking plug
1 × CVP (LP)
1 × EVM
1 × coil
The ICS valve will be fully open if the pilot valve in P is fully open, irrespective of the degree of opening of pilot valves SI and SII.
The ICS valve will be fully closed if the pilot valve in P is fully closed and at least one of the valves in SI or SII is fully closed at the same
time. The relation between the pilot valves in ports SI, SII and P is shown in the table below.
Pilot valve port
Blanking plug A + B
Blanking plug A
ICS valve
SI
SII
P
Open
Open
Closed
Open
Open
Open
Open
Open
Closed
Closed
Closed
Open
Closed
Open
Open
Closed
Open
Closed
Closed
Closed
Open
Open
Open
Closed
Closed
Closed
Closed
Closed
Closed
Open
Open
G R U P A
Open
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
66
Example no. 3-2
Products
Constant pressure regulation
combined with electrical wide
open.
–0.66 to 7 bar g
(19.5 in. Hg to 102 psig).
1 × ICS 3 Pilots
1 × blanking plug
1 × CVP (LP)
1 × EVM
Example no. 3-4
Products
Constant pressure regulation
with change-over between two
preset evaporating pressures.
–0.66 to 7 bar g
(19.5 in. Hg to 102 psig).
1 × ICS 3 Pilots
2 × CVP (LP)
1 × EVM
1 × coil
Example no. 3-5
Products
External control pressure with
electrical shut off combined
with constant pressure
regulation.
–0.66 to 7 bar g
(19.5 in. Hg to 102 psig).
1 × ICS 3 Pilots
1 × nipple for external control
pressure
1 × CVP (LP)
1 × EVM
1 × coil
Products
Constant pressure regulation
with change-over between two
preset evaporating pressures.
–0.66 to 28 bar g
(19.5 in. Hg to 406 psig).
1 × ICS 3 Pilots
2 × CVP (HP)
1 × EVM
1 × coil
Example no. 3-21
Products
Differential pressure regulation
combined with electrical wide
open and shut off.
0 to 22 bar g
(0 to 319 psig).
1 × ICS 3 Pilots
1 × CVPP (HP)
2 × EVM
2 × coils
Example no. 3-25
Products
Crankcase pressure regulation
(max. suction pressure
regulation) at low pressure
drops across the valve.
–0.45 to 7 bar g
(13.3 in. Hg to 102 psig).
1 × ICS 3 Pilots
1 × blanking plug
1 × nipple for external control
pressure
1 × CVC
Example no. 3-31
Products
Electronically controlled
media temperature regulation
combined with electrical shut
off and changeover to constant
pressure regulation.
–1 to 8 bar g
(0 in. Hg to 116 psig).
1 × ICS 3 Pilots
1 × CVQ
1 × CVP (LP)
1 × EVM
1 × coil
G R U P A
Example no. 3-18
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pilot controlled servo valves – ICS 25-65
67
WVFX: Correct condensing and receiver pressure
The pressure controlled water valve WVFX are used for regulating the flow of water in refrigeration plant
with water-cooled condensers.
The water valve modulates the condensing pressure to maintain it at a constant level during operation.
When the refrigeration plant is stopped, the cooling water flow is shut off automatically.
Features
Brass valve plate vulcanized
with special rubber
Externally sealed by diaphragms
Connections – water side
· WVFM - G 3/8 - G 1/2
· WVFX - G 3/8 - G 1 1/2
· WVS - G 1 1/4 - G 1 1/2 and
2 - 4 in. for weld flanges
WVFX 15 - 25, stainless steel
housing (option)
Connection 1/4 in. / 6 mm flare
Applications
Advantages
Facts
· Traditional refrigeration
· WVFX 15, 20 and 25 can be supplied
in stainless steel housing which can
be used in connection with sea water
cooling of condensers and compressors.
· Below 20% of max. capacity the WVS
will act as an on-off regulator.
· Air conditioning units
· Other applications with watercooled
condenser
· WVS 32 → 100 are servo-operated
valves.
G R U P A
· The valves are pressure-relieved in
such a way that a variation in the
water pressure will not affect their setting.
· WVFX 10 → 40 are direct actuated
valves.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
68
Technical data and ordering
WVFX, complete valves
Connection
Type
Water side
ISO 228/1
Range
Code no.
Condenser side
bar
WVFX 10
G 3/8
1 /4
in. / 6 mm flare
3.5 → 16
003N1100
WVFX 10
G 3/8
1 /4
in. / 6 mm flare
4.0 → 23
003N1105
WVFX 15
G 1/2
1 /4
in. / 6 mm flare
3.5 → 16
003N2100
WVFX 15
G 1/2
1 /4
in. / 6 mm flare
4.0 → 23
003N2105
WVFX 20
G 3/4
1 /4
in. / 6 mm flare
3.5 →16
003N3100
WVFX 20
G 3/4
1/4
in. / 6 mm flare
4.0 → 23
003N3105
WVFX 25
G1
1/4
in. / 6 mm flare
3.5 →16
003N4100
WVFX 25
G1
1/4
in. / 6 mm flare
4.0 → 23
003N4105
WVFX 32
G 1 1/4
1/4
in. / 6 mm flare
4.0 →17
003F1232
WVFX 40
G 1 1/2
1/4
in. / 6 mm flare
4.0 →17
003F1240
3.5 → 16
4.0 → 23
3.5 → 16
4.0 → 23
3.5 → 16
4.0 → 23
003N2101
003N2104
003N3101
003N3104
003N4101
003N4104
WVFX with stainless steel housing (W. no. 1.4581)
WVFX 15
WVFX 15
WVFX 20
WVFX 20
WVFX 25
WVFX 25
G 1/2
G 1/2
G 3/4
G 3/4
G1
G1
1/4
in. / 6 mm flare
in. / 6 mm flare
1/4 in. / 6 mm flare
1/4 in. / 6 mm flare
1/4 in. / 6 mm flare
1/4 in. / 6 mm flare
1/4
WVS, parts programme
Code no.
Valve body
Pilot unit 3)
Flange set 4)
1 1/4 1)
1 1/2 1)
2 weld flange
2 1/2 weld flange
3 weld flange
016D5032
016D5040
016D5050 2)
016D5065 2)
016D5080 2)
016D1017
016D1017
016D1017
016D1017
016D1017
027N3050
027N3065
027N3080
Servo spring
for differential
pressure range of
1 → 10 bar
016D1327
016D0575
016D0576
016D0577
016D0578
4 weld flange
016D5100 2)
016D1017
027N3100
016D0579
Type
Connection
and spring housing.
WVS 32
WVS 40
WVS 50
WVS 65
WVS 80
outlet flange.
WVS 100
1) ISO 228/1 - G
2) Code numbers cover valve body,
flange gaskets, flange bolts and
screws for pilot valve.
3) Code numbers cover control element
4) Code numbers cover an inlet and an
Accessories
Description
1 m capillary tube 1/4 in. (6 mm)
flare coupling nuts at each end
Bracket for WVFX 10 → 25
Code no.
060-0071
003N0388
Technical data
Type
higher pressure than a WVFX,
range 3.5 → 16 bar.
3) WVFX 15, 20 and 25 with stainless
steel housing only.
Max.
test pressure
p’
Media
Liquid side
Max. working pressure
PB
Max.
test pressure
p’
bar
bar
29.0
29.0
29.0
29.0
29.0
29.0
29.0
26.5
26.5
29.0
29.0
29.0
29.0
29.0
29.0
Fresh water,
neutral
brine,
sea water 3)
Fresh water,
neutral
brine
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
bar
24
24
24
24
24
24
24
10
10
16
16
16
16
16
16
kv value1)
m3/h
1.4
1.9
1.9
3.4
3.4
5.5
5.5
11.0
11.0
12.5
21.0
32.0
45.0
80.0
125.0
G R U P A
1) The k value is the flow of water in
v
m3/h at a pressure drop across
valve of 1 bar, ρ = 1000 kg/m3.
2) Fully open valve requires 33%
WVFX 10 2)
WVFX 15
WVFX 15 2)
WVFX 20
WVFX 20 2)
WVFX 25
WVFX 25 2)
WVFX 32
WVFX 40
WVS 32
WVS 40
WVS 50
WVS 65
WVS 80
WVS 100
Condenser side
Control
Max. workpress.
ing pressure
adjustPB
Refrigerant
able closing
bar
press.
bar
4.0 → 23.0
26.4
3.5 → 16.0
26.4
4.0 → 23.0
26.4
3.5 → 16.0
26.4
CFC, HCFC,
4.0 → 23.0
26.4
HFC
3.5 → 16.0
26.4
4.0 → 23.0
26.4
4.0 → 17.0
24.1
4.0 → 17.0
24.1
2.2 → 19.0
26.4
2.2 → 19.0
26.4
CFC, HCFC,
2.2 → 19.0
26.4
HFC
2.2 → 19.0
26.4
R717 (NH3)
2.2 → 19.0
26.4
2.2 → 19.0
26.4
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Pressure controlled water valve – WVFX
69
AVTA : Thermostatic regulation of condensing water
Thermostatically operated valves are used for the infinite, proportional regulation of flow quantity, depending on the setting and the sensor temperature.
The valves are self-acting, i.e. they operate without the supply of auxiliary energy such as electricity.
The required temperature is maintained constant with no over consumption of cooling water in cooling
systems.
Features
Can be delivered with
adsorpsion or universal
charge
Brass valve plate vulcanized
with special rubber
Externally sealed by
diaphrams
Brass or stainless
steel housing
Stainless steel housing
Applications
Advantages
Facts
· Traditional refrigeration with water
cooled condenser
· Insensitive to dirt
· Differential pressure: 0 to 10 bar
· Insensitive to water pressure
· Max. working pressure: 16 bar
· Needs no power supply - self acting
· Max. pressure on sensor: 25 bar
· The valve can be placed in any position
· Opens on rising sensor temperature
· The regulation range is defined for the
point at which the valve begins to open
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
70
Technical data and ordering
AVTA with adsorption charge
Connection
ISO 228
Max.temp.
sensor
[oC]
kv value
(m3/h
at ∆p = 1 bar)
Capillary tube
length
[m]
Type
Code no. 1)
G 3/8
1.4
AVTA 10
003N1144
G 1/2
1.9
AVTA 15
003N0107
G 3/4
Small sensor dimensions
– Ø 9,5 × 160 mm
Regulating
range
[oC]
+10 to +80
130
3.4
G1
2.3
5.5
1) Code no. covers complete valve incl. capillary tube gland.
Immersion pockets, see “Spare parts and accessories”, page 8.
AVTA 20
003N0108
AVTA 25
003N0109
The charge consists of active carbon and CO2 which is adsorbed
on falling sensor temperature and thereby produces pressure
changes in the element.
AVTA with universal charge
Connection
ISO 228
Max.temp.
sensor
[oC]
kv value
(m3/h
at ∆p = 1 bar)
Capillary tube
length
[m]
Type
Code no. 1)
G 3/8
1.4
AVTA 10
003N1132
G 1/2
1.9
AVTA 15
003N2132
AVTA 20
003N3132
AVTA 25
003N4132
G 3/4
Sensor dimensions
– Ø 18 × 210 mm
Regulating
range
[oC]
+0 to +30
57
2.0
3.4
G1
5.5
G 3/8
1.4
2.0
AVTA 10
003N1162
G 1/2
1.9
2.0
AVTA 15
003N2162
G 1/2
1.9
2.0 (armoured)
AVTA 15
003N0041
G 3/4
3.4
2.0
AVTA 20
003N3162
3.4
5.0
AVTA 20
003N3165
G 3/4
3.4
2.0 (armoured)
AVTA 20
003N0031
G1
5.5
2.0
AVTA 25
003N4162
G1
5.5
2.0 (armoured)
AVTA 25
003N0032
G1
5.5
5.0
AVTA 25
003N4165
G 3/8
1.4
2.0
AVTA 10
003N1182
G1/2
1.9
2.0
AVTA 15
003N2182
3.4
2.0
AVTA 20
003N3182
G1
5.5
2.0
AVTA 25
003N4182
G1
5.5
3.0
AVTA 25
003N4183 2)
G 3/4
G 3/4
+25 to +65
+50 to +90
90
125
1) Code no. covers complete valve incl. capillary tube gland.
2) A Ø 2 mm bypass is drilled in the valve body.
The charge is a mix of liquid and gas where the liquid surface
(regulating point) is always inside the sensor. Which charge
medium is used depends on the regulation range.
AVTA with mass charge
Connection
ISO 228
G 1/2
G 3/4
Small sensor dimensions
– Ø 9,5 × 160 mm
Regulating
range
[oC]
Max.temp.
sensor
[oC]
+0 to +30
57
kv value
(m3/h
at ∆p = 1 bar)
1.9
3.4
Capillary tube
length
[m]
2.0
Type
Code no. 1)
AVTA 15
003N0042
AVTA 20
003N0043
G 1/2
1.9
2.0
AVTA 10
003N0045
G 1/2
1.9
2.0 (armoured)
AVTA 15
003N0299
1.9
5.0
AVTA 15
003N0034
G 3/4
3.4
2.0
AVTA 20
003N0046
G1
5.5
2.0
AVTA 25
003N0047
G 1/2
+25 to +65
90
1) Code no. covers complete valve incl. capillary tube gland.
The charge is a mix of liquid and gas. Due to the volumetric
conditions the sensor must be installed warmer than the valve,
since the liquid surface (regulation point) must be in the sensor.
AVTA in stainless steel with adsorption charge
Connection
ISO 228
Max.temp.
sensor
[oC]
+10 to +80
130
kv value
(m3/h
at ∆p = 1 bar)
G 1/2
G 3/4
Capillary tube
length
[m]
1.9
3.4
G1
5.5
1) Code no. covers complete valve incl. capillary tube gland.
2.3
Type
Code no. 1)
AVTA 15
003N2150
AVTA 20
003N3150
AVTA 25
003N4140
G R U P A
Regulating
range
[oC]
The charge consists of active carbon and CO2 which is adsorbed
on falling sensor temperature and thereby produces pressure
changes in the element.
d.o.o.
Small sensor dimensions
– Ø 9,5 × 160 mm
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Thermostatic controlled water valves – AVTA
71
GBC: excellent mounting and service
GBC ball valves are manually operated shut-off valves suitable for bi-directional flow. Ball valves are used
in liquid, suction and hot gas lines in refrigeration, freezing and air conditioning systems. The GBC bidirectional ball valves can be delivered with or without external access port. The valves have one-piece
wire seal cap to prevent unintentional cap removal or tampering between services.
Operation by wrench,
¼ turn from fully open to
fully closed valve
Features
Rotation stop for fully open and
fully closed valve
One-piece seal cap conforms to EN 378
Gasket of special PTFE teflon
Valves with access
port available
Burst proof spindle design
High precision
laser welding
Valve seat of
special teflon
Fixing holes for
panel mounting
Bi-directional flow
Applications
Advantages
Facts
· GBC valves are used in liquid, suction
and hot gas lines in all refrigeration
and air-conditioning systems with
fluorinated refrigerants.
· Full flow with minimum pressure drop.
· GBC can be used for all fluorinated
refrigerants (CFC, HCFC and HFC).
· Bi-directional flow, i.e. valve orientation is unimportant.
· Slimline design ensures easy operational handling.
· Valve seat of special teflon to secure
maximum tightness and a long lifetime.
· Max. working pressure (PS/MWP)
45 bar (650 psig).
· Test pressure: 65 bar (940 psig).
· Approvals: UL, CSA and CE.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
72
d.o.o.
· The available access port saves money
if service of the system is necessary.
G R U P A
· Burst proof spindle design prevents
liquid from being trapped internally.
· Temperature range:
–40 to +150°C
Technical data and ordering
Standard valve
Type
Standard GBC valve
Solder ODF connection
kv value 1)
Solder ODF connection
2)
Code no.
1
009G7020
6
009G7030
GBC 10s
3
009G7021
10
009G7031
5.7
GBC 12s
1
009G7022
12
009G7032
10.6
GBC 16s
5
009G7023
16
009G7023
14.1
GBC 18s
3
009G7024
18
009G7035
20.4
GBC 22s
7
/8
009G7025
22
009G7025
28.2
GBC 28s
11/8
009G7026
28
009G7033
52.0
GBC 35s
13/8
009G7027
35
009G7027
80.9
GBC 42s
15/8
009G7028
42
009G7034
121
GBC 54s
21/8
009G7029
54
009G7029
225
GBC 67s
25/8
009G7036
246
GBC 79s
31/8
009G7037
223
/8
/2
/8
/4
Code no.
m3/h
in.
GBC 6s
/4
mm
2)
2.0
Valve with access port
Type
GBC valve with access port
Solder ODF connection
in.
Code no. 2)
GBC 6s
1
/4
GBC 10s
3
/8
GBC 12s
1
GBC 16s
kv value 1)
Solder ODF connection
mm
Code no. 2)
m3/h
009G7050
6
009G7060
2.0
009G7051
10
009G7061
5.7
/2
009G7052
12
009G7062
10.6
5
/8
009G7053
16
009G7053
14.1
GBC 18s
3
/4
009G7054
18
009G7065
20.4
GBC 22s
7
/8
009G7055
22
009G7055
28.2
GBC 28s
11/8
009G7056
28
009G7063
52.0
GBC 35s
13/8
009G7057
35
009G7057
80.9
GBC 42s
15/8
009G7058
42
009G7064
121
GBC 54s
21/8
009G7059
54
009G7059
GBC 67s
25/8
009G7066
246
GBC 79s
31/8
009G7067
223
1)
2)
225
CFD calculated values (Computational Fluid Dynamics)
Code numbers in bold are normally on stock and a shorter delivery time can, therefore, be expected.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Ball valves – GBC
73
NRV and NRVH: correct flow direction - flexible to use
NRV and NRVH check valves can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. The valves ensure the correct flow direction and prevent
back-condensation from a warm part of the system to the cold evaporator. A built-in damping piston
makes the valves suitable for installation in lines where pulsation can occur, e.g. in the discharge line
from the compressor.
Features
Pressure drop
NRV 0.04 - 0.07 bar
NRVH 0.3 bar
Max. working pressure
46 bar
Standard or oversize
solder connections
Built-in damping piston
Flare and solder version
NRV(H) 6 to 19 - straightway
NRV(H) 22 to 35 - angleway
Advantages
Facts
· Traditional refrigeration
· For all flourinated refrigerants
· Heat pump systems
· Resonance problems can be avoided
at partial load in the refrigeration
plant.
· In refrigeration plants with compressors connected in parallel, it is advantageous to use NRVH, since the spring
is stronger than in NRV.
· Oversize connections provide flexibility in use.
· Both straightway and angleway
versions.
· Prevents back-condensation from
warm to cold system part.
· Max. working pressure
PS/MWP = 46 bar
· Ensures correct flow direction.
· Max. test pressure
p' = 60 bar
· Air conditioning units
· Liquid coolers
· Transport refrigeration
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
74
d.o.o.
· Temperature of the medium
–50 → 140°C
G R U P A
Applications
Technical data and ordering
Connection
Type
in.
Version
Size
NRV6
020-1040
6
020-1040
10
020-1041
½
020-1042
12
020-1042
NRV 16
5/8
020-1043
16
020-1043
NRV 19
¾
020-1044
19
020-1044
Flare
NRV 6s
Pressure drop
across valve
Δp bar 2)
0.07
020-1010
6
020-1014
020-1057
10
020-1050
3/8
020-1069
10
020-1062
0.30
NRV 10s
3/8
020-1011
10
020-1015
0.07
NRVH 10s
3/8
020-1046
10
020-1036
0.30
NRV 10s 4)
½
020-1058
12
020-1051
0.07
NRVH 10s 4)
½
020-1070
12
020-1063
0.30
NRV 12s
½
020-1012
12
020-1016
0.05
½
020-1039
12
020-1037
0.30
5/8
020-1052
16
020-1052
0.05
NRVH 12s
Straightway
NRV 12s 4)
0.07
NRVH 12s 4)
5/8
020-1064
16
020-1064
0.30
NRV 16s
5/8
020-1018
16
020-1018
0.05
NRVH 16s
5/8
020-1038
16
020-1038
0.30
NRV 16s 4)
-
-
18
020-1053
0.05
NRVH 16s 4)
-
-
18
020-1065
0.30
NRV 16s 4)
¾
020-1059
19
020-1059
0.05
¾
020-1071
19
020-1071
0.30
-
-
18
020-1017
0.05
NRVH 16s
4)
Solder
ODF
NRV 19s
NRVH 19s
-
-
18
020-1008
0.30
NRV 19s
¾
020-1019
19
020-1019
0.05
NRVH 19s
¾
020-1023
19
020-1023
0.30
NRV 19s 4)
7/8
020-1054
22
020-1054
0.05
NRVH 19s 4)
7/8
020-1066
22
020-1066
0.30
NRV 22s
7/8
020-1020
22
020-1020
0.04
NRVH 22s
7/8
020-1032
22
020-1032
0.30
NRV 22s 4)
11/8
020-1060
28
020-1055
0.04
NRVH 22s 4)
11/8
020-1072
28
020-1067
0.30
NRV 28s
11/8
020-1021
28
020-1025
0.04
11/8
020-1029
28
020-1033
0.30
13/8
020-1056
35
020-1056
0.04
NRVH 28s
Angleway
NRV 28s 4)
NRVH 28s 4)
13/8
020-1068
35
020-1068
0.30
NRV 35s
13/8
020-1026
35
020-1026
0.04
NRVH 35s
13/8
020-1034
35
020-1034
0.30
NRV 35s 4)
15/8
020-1061
42
020-1027
0.04
15/8
020-1073
42
020-1035
0.30
NRVH 35s
4)
Max.
working
pressure
0.56
1.43
3.60
5.50
¼
4)
kv-value 3)
m3/h
2.05
0.05
3/8
NRVH 6s
4)
Code no. 1)
020-1041
NRV 6s 4)
3)
Size
¼
NRV 12
2)
Code no. 1)
3/8
NRV 10
1)
mm
0.56
1.43
2.05
3.60
46 bar
5.50
8.50
19.00
29.00
Code numbers in bold are normally on stock and a shorter delivery time can, therefore, be expected.
Δp = the minimum pressure at which the valve is completely open.
The NRVH with a stronger spring is used in the discharge line from compressors connected in parallel.
The kv value is the flow of water in m3/h at a pressure drop across valve of 1 bar, ρ = 1000 kg/m3.
Oversize connections.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Check valves – NRV and NRVH
75
OUB: The easy way for oil return
The oil separator type OUB is for use in all refrigeration plant where the compressor lubricating oil must
be returned direct to the compressor oil sump under all operating conditions.
In this way lubricating oil from the compressor is prevented from circulating with the refrigerant in the
refrigeration system itself.
Features
Efficient oil separation and
filtration
Net volume
OUB 1: 0.52 l
OUB 4: 2.46 l
Flare or solder connection
Easy mounting with bracket
Available with 1/4 in. flare or
6 mm solder connection oil
return
The OUB opens for automatic oil
return through a needle valve
Applications
Advantages
Facts
· Traditional refrigeration
· High efficiency
Due to the interaction of reduced flow
and a change of flow direction for oil
concentration. The collection of the
separated oil at high temperature and
the automatic return of the oil to the
crankcase.
· Ensures oil return to compressor oil
sump. Prevents compressor breakdown
caused by lack of lubrication. Increases
compressor operating life.
· High efficiency
Protects against liquid hammer in
compressor
· Refrigerants CFC, HCFC, HFC
· Air conditioning units
· Pulsation and noise damping on highpressure side of system
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
76
d.o.o.
· Better utilisation of condenser and
evaporator capacity (no oil-gas
collection).
G R U P A
· Max. working pressure PS = 28 bar
Technical data and ordering
in.
3
/8
mm
10
3
/8
10
1
/2
OUB 1
12
1
/2
Version
R404A
R507
R407C
040B0010 + 2 × 040B0132
040B0010 + 2 × 040B0140
040B0010 + 2 × 040B0138
Flare
3.1
2.5
3.5
3.5
4.4
040B0010 + 2 × 040B0136
Flare
Solder
040B0010 + 2 × 040B0144
Without connection unions
10
Solder
3.1
2.5
3.5
040B0010
3.5
4.4
040B0023
10
Solder
5
16
Flare
040B0040 + 2 × 040B0256
5
16
Solder
040B0040 + 2 × 040B0266
3
18
Flare
040B0040 + 2 × 040B0258
3
Solder
040B0040 + 2 × 040B0268
7
Solder
/8
/8
/4
/4
/8
OUB 1s
040B0010 + 2 × 040B0142
040B0010 + 2 × 040B0139
16
OUB 1s 2)
040B0010 + 2 × 040B0134
Solder
16
OUB 1s 1)
Code no.
for OUB + unions (straightway)
Solder
5
/8
R134a
Flare
5
/8
R22
Solder
Solder
12
OUB 1 / OUB 4
Rated plant capacity
kW
Connection
Type
OUB 4
22
1
25
Solder
11.6
9.6
12.8
12.8
16.0
040B0029
040B0040 + 2 × 040B0270
040B0040 + 2 × 040B0264
Flare
040B0040 + 2 × 040B0260
1
Solder
040B0040 + 2 × 040B0272
11/8
Solder
040B0040 + 2 × 040B0274
Solder
040B0040 + 2 × 040B0265
28
Without connection unions
040B0040
1) 1/4 in. flare connection to oil return line.
2) 6 mm ODF solder connection to oil return line.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Oil separator – OUB
77
HE : utilization of cooling effect
Heat exchanger type HE is used primarily for heat transfer between the liquid and suction lines of the
refrigeration plant.
The purpose is to utilize the cooling effect which without a heat exchanger is otherwise lost to the
ambient air via uninsulated suction lines.
In the heat exchanger, this effect is used to subcool the refrigerant liquid.
Connection size liquid line
6 to 16 mm (1/4 to 5/8 in.)
Features
Pure copper for optimal heat transfer
Connection size suction line
12 to 42 mm (1/2 to 1 5/8 in.)
Avaiable in 5 different sizes
Product type
File name
Date
HE
15D58
I.S. 2007.08.09
Applications
Advantages
Facts
· Traditional refrigeration
· The design is such that normal suction
gas velocities are achieved, with a subsequent small pressure drop. Thus the
heat exchanger capacity will match
plant capacity.
· For use with CFC, HCFC and HFC
refrigerants
· Air conditioning units
HE 0.5, 1.0, 1.5, 4.0: PS = 28 bar
HE 8.0:
PS = 21.5 bar
· An HE used as an auxiliary condenser
must always be selected according to
the connection dimensions.
G R U P A
· At the same time, oil return to the
compressor is ensured.
· Max. working pressure
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
78
Technical data and ordering
Solder connection ODF
Type
HE 0.5
HE 1.0
HE 1.5
HE 4.0
HE 8.0
Liquid line
Suction line
in.
in.
mm
6
1
/4
3
/8
12
1
/2
5
/8
16
18
3
/4
28
11/8
/2
42
15/8
/8
015D0007
015D0008
16
5
015D0005
015D0006
12
1
015D0003
015D0004
12
/2
015D0001
015D0002
10
1
Code no.
mm
015D0009
015D0010
Selection
The curve for R22 shows that an HE 4.0 is
suitable. The curve for HE 4.0 lies immediately above the intersection of the lines
through
Qe = 4.5 kW and te = –25°C.
K×A
1
Type
The heat flow Q during heat exchange is
calculated from the formula:
Q = k × A × Δtm
1
Q
k
A
Δtm
Δtm =
Δtmax. – tmin.
Δtmax.
ln
Δtmin.
2.3
HE 1.0
3.1
HE 1.5
4.9
HE 4.0
11.0
HE 8.0
23.0
) These figures apply to dry gas only. Even if a thermostatic
expansion valve is used, the suction gas will carry very small
liquid drops into the suction line.
The fins of the HE catch these drops which then evaporate.
This may result in a smaller superheat than the theoretically
calculated value.
Precise heat exchanger sizing can be obtained
from the curves which show plant capacity Qe for
R22, R134a and R404A depending on evaporating temperature te.
Example
Plant capacity Qe
Refrigerant
Evaporating temperature te
= 4.5 kW
= R22
= –25°C
d.o.o.
k × A values
Determined by experiment (see table).
HE 0.5
G R U P A
heat flow in W
heat transfer coefficient in W/m2 °C
transfer area of the heat exchanger
in m2
the average temperature difference
in °C, calculated from the formula:
) Dry suction gas / refrigerant liquid
(normal use in refrigeration plant
with fluorinated refrigerants)
W / °C
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Heat exchanger – HE
79
SGN/H, SGR, SGRN/H: secure optimal protection
Sight glasses are mostly installed in the liquid line between the filter drier and the expansion valve to
monitor the condition of the refrigerant. The SGR is mainly used to indicate the condition of the refrigerant as well as the liquid level in the receiver or the oil level in the compressor and has no moisture indicator. The SGN/H and SGRN/H are equipped with sensitive indicators that reflects a colour, depending on
the moisture content in the refrigerant.
Features
Designed for CFC and HCFC
Tightening gasket
Very reliable due to minimal
dependancy on temperature
Indicator
- green for dry
- yellow for wet
Connections:
solder × solder (illustrated),
flare ext. × ext. or
flare int. × ext.
Max. working pressure:
up to 46 bar
Working temperature range:
–50 to 80°C
Applications
Advantages
Facts
· Traditional refrigeration
· Best visual indication of moisture
(minimal dependence on temperature).
· Designed for HFC refrigerants.
· The flare ext. × int. version can be
screwed together with filter drier
(reduction of assembly costs).
· Wide range with sizes from 6 to 22
mm.
· Flare connections are 4-sided for quick
installation.
· Working temperature: –50 to 80°C.
· Heat pump systems
· Air conditioning units
· Liquid coolers
· Transport refrigeration
· Max. working pressure: up to 46 bar.
· Approvals: PED, UL, GOST.
· Glass diameter permits high working
pressures.
G R U P A
· Extended solder connections.
· Flare-/solder connection or socket
type.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
80
Technical data and ordering
Moisture content ppm = parts per million
Intermed. color
Yellow - wet
Green - dry
Intermed. color
Green - dry
Yellow - wet
SGN and SGRN
R22
R134a
R404A
R407C
R507
< 30
< 30
< 20
< 30
< 15
Liquid temperature 25°C
30 - 120
30 - 100
20 - 70
30 - 140
15 - 60
>120
>100
> 70
>140
> 60
< 50
< 45
< 25
< 60
< 30
Liquid temperature 43°C
50 - 200
45 - 170
25 - 100
60 - 225
30 - 110
>200
>170
>100
>225
>110
SGH and SGRH
R410A
< 20
Liquid temperature 25°C
20 - 165
>165
< 40
Liquid temperature 43°C
40 - 350
>350
Type
Version
SGN 6
SGN 10
SGN 12
SGN 16
SGN 19
SGN 6
SGN 10
SGN 12
SGN 16
SGN 19
SGN 6s
SGN 6s
SGN 10s
SGN 10s
SGN 12s
SGN 12s
SGN 16s
SGN 18s
SGN 19s
SGN 22s
SGN 22s
SGN 6s
SGN 10s
SGN 12s
SGN 16s
SGN 22s
SGH 6
SGH 6s
SGH 10s
SGH 12s
SGH 16s
SGH 22s
SGH 22s
SGR
SGRN ½
SGRN for saddle
Sight glass
saddle for
SGRN
SGRH for
saddle
Sight glass
saddle for
SGRH
1)
3)
Code no. 1)
MWP
6×6
10 × 10
12 × 12
16 × 16
19 × 19
014-0161
014-0162
014-0163
014-0165
014-0166
35
6×6
10 × 10
12 × 12
16 × 16
19 × 19
014-0171
014-0172
014-0173
014-0174
014-0175
35
014-0181
014-0191
014-0182
014-0192
014-0183
014-0193
014-0184
014-0195
014-0185
014-0186
014-0187
35
014-0201
014-0202
014-0203
014-0204
014-0206
35
mm
Flare, ext. × ext.
¼×¼
3/8 × 3/8
½×½
5/8 × 5/8
¾×¾
Flare, int. × ext. 2)
¼×¼
3/8 × 3/8
½×½
5/8 × 5/8
¾×¾
¼×¼
6×6
3/8 × 3/8
10 × 10
½×½
Solder, ODF × ODF
5/8 × 5/8
¾×¾
7/8 × 7/8
11/8 × 11/8
Solder, ODF × ODM 2)
¼×¼
3/8 × 3/8
½×½
5/8 × 5/8
7/8 × 7/8
12 × 12
16 × 16
18 × 18
19 × 19
22 × 22
16 × 16
22 × 22
Flare, ext. × ext.
¼×¼
014-1660
46
Solder, ODF × ODF
¼×¼
3/8 × 3/8
½×½
5/8 × 5/8
7/8 × 7/8
11/8 × 11/8
014-1090
014-1092
014-1091
014-1094
014-1096
014-1098
46
Pipe thread
NPT
NPT
G ¾ A 3)
¾ NPT
½ NPT
014-0004
014-0005
014-0002
35
NPT
M
½ NPT
014-0006
014-1155
35
014-1059
014-1056
014-1057
014-1058
014-1067
014-1068
014-1069
-
014-1601
46
014-1072
-
Tube fitting
(M24 × 1)
M24 ×1
7/8
11/8
13/8
15/8
21/8
31/8
41/8
M
Tube fitting
(M20 × ½)
M20 ×1
31/8
Code numbers in bold are normally on stock and a shorter delivery time can, therefore, be expected.
Can be mounted directly into the filter drier.
ISO 228/1.
G R U P A
2)
Connection
in.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Sight glasses – SGN/H, SGR and SGRN/H
81
DML: Excellent protection of your refrigeration system
The DML liquid line filter driers protect refrigeration and air conditioning systemsfrom moisture, acids
and solid particles. The 100% solid molecular sieve core, assuresa high drying capacity and avoids acid
formation in the system.
Features
High dirt retention, down to 25 μm particles,
with minimal pressure drop
1 piece plasma welded shell
– less risk of refrigerant loss
Powder painted surface
to prevent corrosion
Inlet
Copper plated steel
connectors
Spring to keep core
in fixed position
Eliminator® core for
optimal drying capacity
Outlet
Felt pad protecting core from
breaking up due to vibration
Easy to remove
protective cap
Perforated plate – to keep
internal parts in position
Advantages
Facts
· Traditional refrigeration
· Air conditioning units
· Transport refrigeration
· High drying capacity avoiding the risk
of acid formation in the refrigeration
system.
· Driers with flare connections have
hard plastic screw type end caps for
greater protection and easy removal.
Aluminium caps on driers with solder
connections.
· Wide range with sizes from 3 to 75
cubic inches.
· 100% 3Å molecular sieve core.
· Optimized for HFC refrigerants (R134a,
R404A, R410A, etc.) with POE and PAG
oils. Compatible with R22.
· MWP (PS): up to 42 bar (610 psi).
· HCFC & HFC refrigerants.
· Available with flare- or solder connectors
(copper-plated steel).
· Wide range with sizes from 3 to 75
cubicinches.
· UL and PED approvals – label indicating
internal free volume.
· Can be installed in any position provided
"the arrow" is in the direction of flow.
G R U P A
Applications
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
82
Technical data and ordering
Filter drier
Drying capacity [kg refrigerant]1)
Solid core
Connection
Type
in.
mm
24°C
R22
R407C
R410A
R404A
R507
R134a
Surface Volume
[cm3]
[cm3]
52°C
24°C
Liquid capacity in kW2)
52°C
24°C
R134a
R404A
R507
Solder
R22
R407C
R410A
Flare
Code no.3)
Code no.3)
in.
mm
52°C
DML 032
1
/4
6
DML 033
3
/8
10
DML 052
1
6
DML 053
3
10
DML 082
1
6
7
5
8
023Z4567
023Z4566
023Z5039
DML 083
3
10
19
14
21
023Z4570
023Z4569
023Z5040
DML 084
1
12
26
20
29
023Z4572
023Z4571
023Z5041
DML 085
5
16
42
31
46
023Z4573
023Z4573
023Z5073
DML 162
1
6
7
5
8
023Z4575
023Z4574
023Z5042
DML 163
3
10
22
16
24
023Z4578
023Z4577
023Z5043
DML 164
1
12
30
22
33
023Z4580
023Z4579
023Z5044
DML 165
5
16
43
30
47
023Z4581
023Z4581
023Z5045
DML 166
3
19
44
31
48
023Z4582
023Z4582
023Z5046
DML 303
3
10
21
15
23
023Z4585
023Z4584
023Z0049
DML 304
1
12
31
22
34
023Z4587
023Z4586
023Z0050
DML 305
5
16
45
33
49
023Z4588
023Z4588
023Z0051
DML 306
3
19
62
45
68
023Z4589
023Z4589
023Z0193
DML 307
7
22
62
45
68
023Z4590
023Z4590
DML 414
1
12
DML 415
5
16
/4
/8
/4
/8
/2
/8
/4
/8
/2
/8
/4
/8
/2
/8
/4
/8
/2
/8
65
75
110
175
330
400
41
5.5
65
100
5
8.5
8
12.5
225
20
25.5
57
650
13
12
27
480
7.5
43.5
54
80
92.5
75
130
4.5
4.5
7.5
11.5
24
51
70
8
12.5
27
57
80
4
7
11
23
48.5
74
4)
Code no.3)
7
5
7
023Z4552
023Z45514)
023Z50354)
17
13
19
023Z4555
023Z4554
023Z50364)
7
5
8
023Z4559
023Z4558
023Z5037
18
14
19
023Z4562
023Z4561
023Z5038
32
23
35
023Z4594
023Z4593
023Z0109
53
37
58
023Z4595
023Z4595
023Z0110
DML 417
7
22
91
65
100
023Z4696
023Z4596
DML 606
3
19
44
32
48
023Z4601
023Z4601
DML 607
7
/8
22
75
54
82
023Z4602
023Z4602
11/8
28
87
64
95
023Z4604
023Z4603
/8
22
82
60
90
023Z4605
023Z4605
11/8
28
94
68
102
023Z4607
023Z4606
DML 609
DML 757
DML 759
/8
/4
7
660
800
960
1300
113
107
160
185
150
260
1)
Solder version
Flare version
2)
3)
4)
101
140
114
160
97
148
Drying capacity is based on following moisture content test standards before and after drying:
R134a: From 1050 ppm W to 75 ppm W. If drying to 50 ppm W is required, reduce stated capacities by 15%.
R404A, R507: From 1020 ppm W to 30 ppm W.
R407C: From 1020 ppm W to 30 ppm W.
R410A: From 1050 ppm W to 60 ppm W.
R22: From 1050 ppm W to 60 ppm W in accordance with ARI 710-86.
Given in accordance with ARI 710-86 for te = –15°C (5°F), tc = 30°C (85°F) and ∆p = 0.07 bar (1 psig).
Code numbers in bold are normally on stock and a shorter delivery time can therefore be expected.
Wire mesh in filter drier outlet.
Flare / solder adapter
Type
Connection
flare × solder
in.
Code no.3)
for
1 pc
Code no.3)
for
2 pcs.
Type
Connection
flare × solder
mm
Code no.3)
for
1 pc
Code no.3)
for
2 pcs.
023U8001
FSA 22
1
023U8012
023U8002
FSA 26m
1
023U8011
FSA 32
3
023U8022
-
FSA 36m
3
/8 × 6
023U8021
-
FSA 33
3
023U8014
023U8004
FSA 310m
3
/8 × 10
023U8013
023U8003
FSA 44
1
023U8016
023U8006
FSA 412m
1
/2 × 12
023U8015
023U8005
FSA 516m
5
023U8017
023U8007
FSA 516m
5
/8 × 16
023U8017
023U8007
FSA 66
3
/4 × 3/4
023U8020
023U8010
FSA 618m
3
/4 × 18
023U8019
023U8009
/4 × 1/4
/8 × 1/4
/8 × 3/8
/2 × 1/2
5
/8 × /8
/4 × 6
Accessories
B2 - 4 spec.
Qty.
Code no.3)
Copper seal
Size
Qty.
Code no.3)
300
011L4025
B2 -10
5
/8 in./16 mm
100
011L4019
B2 -12
3
50
011L4020
1
B2 - 6
3
/8 in./10 mm
300
011L4017
B2 - 8
1
/2 in./12 mm
200
011L4018
/4 in./18 mm
G R U P A
Size
/4 in./6 mm
Copper seal
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Liquid line filter driers – DML
83
DCR: compact design for easy installation and service
DCR filter driers protect refrigeration and air conditioning systems from moisture, acids and solid
particles. They utilise (a) replaceable solid core(s) and are suitable for liquid and suction line installation
in both single and multi-compressor configurations. The solid core assures a high drying capacity and
avoids acid formation in the system.
Features
Corrosion-resistant powder-paint finish
including zinc-phosphate pre-treatment
Core holder for fixing
the core in position.
The welding version allows soldering into copper tubes with
Silver-flo 55 and Easy-flow flux.
Connections for solder (copper/steel)
or welding (steel).
Standard or high pressure top cover.
Standard program for working
pressures below 35 bar.
High pressure versions
available for applications
up to 46 bar.
Filter to catch possible
loose particles.
Helium leak tested housings
for 1-4 cores.
Three different core types available.
Strainer is an option.
Top cover with or without external access port.
Applications
Advantages
Facts
· Commercial plants with fluorinated
refrigerants or CO2.
· Highly efficient dirt retaining capabilities on both the suction and the liquid
line.
· 48 - DM core for liquid line application
(100% molecular sieve for HFC). Provides high moisture adsorption at low
and high condensing temperatures.
Effective protection against impurities.
· Industrial plants with fluorinated
refrigerants or CO2.
· Can be used in all environments,
including marine applications.
· Can be installed in any position.
· 48 - DA core for suction line after a
compressor burn-out (30% molecular
sieve and 70% activated alumina for
CFC/HCFC/HFC).
· 48 - F strainer
[email protected]
suction line.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr,
e-mail:
84
d.o.o.
· One of the 8 holes for fixing the screws
in the cover has a split screw hole to
keep the cover in place (very easy to
place the cover back in position and
fix the screws).
· 48 - DC core for liquid line application
(80% molecular sieve and 20% activated alumina for CFC and HCFC).
Effectively adsorbs moisture and acid
in the system.
G R U P A
· The new core holder requires minimum free space to remove the core
for replacement.
Capacities
48-DM
Drying capacity [kg refrigerant] 1)
Type
Number
of cores
R134a
24°C
DCR 0485
DCR 0487
DCR 0489
DCR 04811
DCR 04813
DCR 04817
DCR 04821
1
R404A/R507
52°C
82.5
24°C
78.5
135.0
Liquid capacity [kW] 2)
R407C/R410A
52°C
24°C
74.0
52°C
83.0
R134a
R404A/R507 R407C/R410A
71.0
79
139
186
227
227
227
227
57
99
133
162
162
162
162
88
153
206
259
259
259
259
100
155
211
256
256
155
240
326
396
396
DCR 0967
DCR 0969
DCR 09611
DCR 09613
DCR 09617
2
165.0
157.0
270.0
148.0
166.0
142.0
140
217
295
358
358
DCR 1449
DCR 14411
DCR 14413
DCR 14417
3
247.5
235.5
405.0
222.0
249.0
213.0
226
356
356
356
162
255
255
255
250
394
394
394
DCR 19211
DCR 19213
DCR 19217
4
330.0
314.0
540.0
296.0
332.0
284.0
372
460
460
266
329
329
411
509
509
48-DC
Drying capacity [kg refrigerant] 1)
Type
Number
of cores
R22
24°C
DCR 0485
DCR 0487
DCR 0489
DCR 04811
DCR 04813
DCR 04817
DCR 04821
1
67.0
R134a
52°C
62.0
24°C
71.0
52°C
67.5
Liquid capacity [kW] 2)
R404A/R507
R407C/R410A
24°C
24°C
115.0
52°C
62.0
70.5
R22
R134a
R404A/
R507
R407C/
R410A
60.0
88
153
206
259
259
259
259
79
139
186
227
227
227
227
57
99
133
162
162
162
162
88
153
206
259
259
259
259
140
217
295
358
358
100
155
211
256
256
155
240
326
396
396
52°C
DCR 0967
DCR 0969
DCR 09611
DCR 09613
DCR 09617
2
134.0
124.0
142.0
135.0
230.0
124.0
141.0
120.0
155
240
326
396
396
DCR 1449
DCR 14411
DCR 14413
DCR 14417
3
201.0
186.0
213.0
202.5
345.0
186.0
211.5
180.0
250
394
394
394
226
356
356
356
162
255
255
255
250
394
394
394
DCR 19211
DCR 19213
DCR 19217
DCR 19221
4
268.0
248.0
284.0
270.0
460.0
248.0
282.0
240.0
411
509
509
509
372
460
460
460
266
329
329
329
411
509
509
509
1)
2)
Drying capacity is based on the following moisture contents before and after drying:
R22:
From 1050 ppm W to 60 ppm W in accordance with ARI 710-86.
R134a:
From 1050 ppm W to 75 ppm W. If refrigerant is to be dried to 50 ppm W, reduce the stated capacities by 15%.
R404A, R407C & R507: From 1020 ppm W to 30 ppm W.
R410A:
From 1050 ppm W to 60 ppm W.
Liquid capacity given in accordance with ARI 710-2002 evaporating temperature te = –15°C,
condensing temperature tc = +30°C and pressure drop across filter drier Δp = 0.07 bar.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Filter driers – DCR
85
Capacities
48-DA
Drying capacity [g of water] 3)
Evaporating temperature te [°C]
Number
of cores
–40
DCR 048
1
28
DCR 096
2
DCR 144
DCR 192
Type
–20
4.4
–30
4.4
–40
19
12
45
38
27
47
56
37
24
90
77
54
3
84
56
36
135
115
4
112
74
48
180
153
R22
3)
4)
–20
–40
30
19
42
35
25
26.6
94
60
37
84
70
50
53.3
81
142
90
56
126
105
75
79.9
108
189
120
75
168
140
100
106.5
R404A/R507
–20
Acid capacity 4)
[g]
4.4
R134a
–20
4.4
R407C/R410A
Drying capacity is expressed during drying in:
R22:
EPD = 10 ppm W, corresponding to a dew point temperature = –50°C
R134a:
EPD = 50 ppm W, corresponding to a dew point temperature = –37°C
R404A: EPD = 10 ppm W, corresponding to a dew point temperature = –40°C
R407C: EPD = 10 ppm W, corresponding to a dew point temperature = –40°C
Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number).
48-DA
Recommended plant capacity [kW] 5) in suction line - burn-out
Evaporating temperature te [°C]
–40
–20
4.4
–30
–20
4.4
Type
–40
–20
4.4
–40
0.10
0.21
0.04
–20
4.4
0.10
0.21
Pressure drop [Δp bar]
0.04
0.10
0.21
0.04
R22
0.07
0.14
0.04
R134a
R404A/R507
R407C/R410A
DCR 0485
DCR 0487
DCR 0489
DCR 04811
DCR 04813
DCR 04817
DCR 04821
3.1
5.8
7.8
10.0
10.0
10.0
10.0
8.9
16.1
21.6
27.3
27.3
27.3
27.3
21.0
37.8
50.7
63.3
63.3
63.3
63.3
3.0
5.6
7.5
9.6
9.6
9.6
9.6
5.4
9.9
13.3
16.8
16.8
16.8
16.8
13.0
23.4
31.5
39.5
39.5
39.5
39.5
2.4
4.5
6.0
7.7
7.7
7.7
7.7
7.1
12.9
17.2
21.8
21.8
21.8
21.8
17.5
31.2
41.8
51.9
51.9
51.9
51.9
3.1
5.8
7.8
10.0
10.0
10.0
10.0
8.9
16.1
21.6
27.3
27.3
27.3
27.3
21.0
37.8
50.7
63.3
63.3
63.3
63.3
DCR 0965
DCR 0967
DCR 0969
DCR 09611
DCR 09613
DCR 09617
DCR 09621
3.3
5.8
8.7
11.9
14.1
14.1
14.1
9.1
16.2
24.6
33.4
39.9
39.9
39.9
21.4
38.1
58.3
79.3
95.2
95.2
95.2
3.2
5.6
8.4
11.4
13.6
13.6
13.6
5.7
9.9
15.0
20.4
24.3
24.3
24.3
13.4
23.6
35.9
48.9
58.5
58.5
58.5
2.5
4.5
6.8
9.3
11.0
11.0
11.0
7.4
12.9
19.7
26.8
32.0
32.0
32.0
18.0
31.4
48.1
65.4
78.7
78.7
78.7
3.3
5.8
8.7
11.9
14.1
14.1
14.1
9.2
16.2
24.6
33.4
39.9
39.9
39.9
21.6
38.1
58.3
79.3
95.2
95.2
95.2
DCR 1445
DCR 1447
DCR 1449
DCR 14411
DCR 14413
DCR 14417
DCR 14421
3.5
6.6
8.8
13.2
13.2
13.2
13.2
10.0
18.9
25.1
38.1
38.1
38.1
38.1
22.8
42.9
57.2
92.2
92.2
92.2
92.2
3.4
6.3
8.4
12.7
12.7
12.7
12.7
6.0
11.2
15.0
23.0
23.0
23.0
23.0
14.0
26.4
35.2
56.2
56.2
56.2
56.2
2.7
5.1
6.8
10.3
10.3
10.3
10.3
7.7
14.5
19.4
30.7
30.7
30.7
30.7
18.9
35.6
47.5
76.6
76.6
76.6
76.6
3.5
6.6
8.8
13.2
13.2
13.2
13.2
10.0
18.9
25.1
38.1
38.1
38.1
38.1
22.8
42.9
57.2
92.2
92.2
92.2
92.2
DCR 1925
DCR 1927
DCR 1929
DCR 19211
DCR 19213
DCR 19217
DCR 19221
4.2
7.9
10.6
14.8
18.0
18.0
18.0
11.5
21.6
28.9
41.8
51.1
51.1
51.1
27.3
51.4
68.9
99.4
122.1
122.1
122.1
4.0
7.6
10.2
14.3
17.4
17.4
17.4
7.1
13.4
18.0
25.5
31.1
31.1
31.1
16.8
31.6
42.1
61.2
75.0
75.0
75.0
3.2
6.1
8.2
11.6
14.1
14.1
14.1
9.2
17.4
23.3
33.6
41.1
41.1
41.1
22.7
42.7
57.2
82.2
101.0
101.0
101.0
4.2
7.9
10.6
14.8
18.0
18.0
18.0
11.5
21.6
28.9
41.8
51.1
51.1
51.1
27.3
51.4
68.9
99.4
122.1
122.1
122.1
5)
Recommended plant capacity is given in accordance with ARI-Standard 710-2002 at:
Evaporating temperature te = 4.4°C
Condensing temperature tc = 32.2°C
48-F
Strainer mounted in suction line
Refrigerant
R22
R134a
R404A/R507
R407C/R410A
Evaporating temperature [°C]
–40
–20
4.4
–30
–20
4.4
–40
–20
4.4
–40
–20
4.4
Pressure drop [Δp bar]
0.04
0.10
0.21
0.04
0.07
0.14
0.04
0.10
0.21
0.04
0.10
0.21
15
47
113
15
28
69
12
38
93
15
47
113
Recommended plant capacity [kW]
Strainer mounted in liquid line 6)
Refrigerant
R22
R134a
R404A/R507
R407C/R410A
Recommended plant capacity [kW]
390
350
260
390
6)
The data given apply to DCR 04811 with 48-F core.
G R U P A
Recommended plant capacity is given in accordance with ARI-Standard 710-2002 at:
Evaporating temperature te
= –15°C
Condensing temperature tc
= +30°C
Pressure drop across filter drier Δp = 0.07 bar
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
86
Technical data and ordering
Steel connectors
Type
Number of
cores
5
DCR 0485
DCR 0487
DCR 0489
DCR 04811
DCR 04813
DCR 04817
DCR 04821
DCR 0969
DCR 0969
DCR 09611
DCR 09613
DCR 09613
DCR 09617
DCR 1449
DCR 1449
DCR 14413
DCR 14413
DCR 14417
DCR 19211
DCR 19213
DCR 19213
DCR housing
incl. top cover
Solder
ODF
in.
1
2
3
4
/8
7
/8
1 1/8
1 3/8
1 5/8
2 1/8
2 5/8
1 1/8
1 3/8
1 5/8
2 1/8
1 1/8
1 5/8
2 1/8
1 3/8
1 5/8
-
Butt weld
ODF
mm
Code no. 7)
in.
1
16
22
35
54
28
35
42
54
28
35
42
54
35
42
/2
/4
1
1 1/4
1 1/2
2
2 1/2
1
1
1 1/4
1 1 /2
1 1 /2
2
1
1
1 1 /4
1 1 /2
2
1 1/4
1 1/2
1 1/2
023U7050
023U7051
023U7053
023U7054
023U7055
023U7057
023U7076
023U7059
023U7060
023U7061
023U7062
023U7063
023U7064
023U7065
023U7066
023U7068
023U7069
023U7070
023U7071
023U7072
023U7073
16
22
28
35
42
54
28
35
42
54
28
42
54
42
-
023U7250
023U7251
023U7252
023U7253
023U7254
023U7255
023U7256
023U7257
023U7276
023U7259
023U7261
023U7263
023U7264
023U7265
023U7269
023U7270
023U7273
/4
1
1
11/4
11/2
2
3
/4
1
11/4
11/2
2
023U7451
023U7452
023U7453
023U7454
023U7455
023U7457
023U7458
023U7459
023U7461
023U7462
023U7464
3
Max. working
pressure
(PS/MWP)
35 bar
28 bar
Copper connectors
DCR 0485s
DCR 0487s
DCR 0489s
DCR 0489s
DCR 04811s
DCR 04813s
DCR 04813s
DCR 04817s
DCR 04821s
DCR 0969s
DCR 09611s
DCR 09613s
DCR 09617s
DCR 1449s
DCR 14413s
DCR 14417s
DCR 19213s
5
/8
/8
11/8
13/8
15/8
21/8
25/8
13/8
2 1 /8
1 5 /8
7
1
2
3
4
35 bar
28 bar
High-pressure steel connectors
DCR 0487
DCR 0489
DCR0489
DCR 04811
DCR 04813
DCR 04817
DCR 0967
DCR 0969
DCR 09611
DCR 09613
DCR 09617
7
1
2
/8
11/8
13/8
15/8
21/8
7
/8
11/8
13/8
15/8
21/8
22
28
35
54
22
35
54
3
46 bar
46 bar
DCR inserts with gasket
Type
Strainer
Code no. 7)
8 pcs.
48-DM solid core 100% molecular sieve
023U1392
48-DM solid core 100% molecular sieve (with special gasket kit)
023U1496
48-DC solid core 80% molecular sieve & 20% Al3O2
023U4381
48-DA solid core 30% molecular sieve & 70% Al3O2
023U5381
48-F strainer
023U1921
7)
Code numbers in bold are normally on stock and a shorter delivery time can, therefore, be expected.
G R U P A
Replaceable
solid core
Material
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Filter driers – DCR
87
DMB: Drying out in bi-flow systems
Bi-flow filter driers have built-in check valves which ensure that refrigerant liquid always flows through
the filter driers from the outer side of the filter core towards the center. Thus all dirt particles are retained
irrespective of flow direction.
DMB filter driers ensure fast and effective adsorption of moisture as well as organic and inorganic acids.
Features
Eliminator® core for
optimal drying capacity
Felt pad protecting
core from breaking up
due to vibrations
Effective dirt removal
to 25 μm
Flare or copper plated
steel solder connections
Powder painted surface to
prevent corrosion
Check valves to secure the
flow through the filter in both
directions
Perforated plate - to keep
internal parts in position
Applications
Advantages
Facts
· Traditional refrigeration
· No dirt released by reversing the flow
direction
· DMB filter driers contain a solid core
consisting of 100% 3Å Molecular
Sieve.
· Heat pumps
· Air conditioning units
· The check valves are not sensitive to
dirt and give minimum restriction,
irrespective of flow direction
· Optimum flow characteristics and dirt
retention
G R U P A
· When building heat pump systems,
the use of Bi-flow filters can, depending on the type of system, save up to
ten solder connections. This reduces
production costs and the number of
potential leakage points.
· DMB filter driers are especially suitable
for heat pumps with HFC refrigerant
and polyolester oil with additives
· Specially designed for HCFC refrigerants
and mineral oil, and also with HFC
refrigerants and polyolester oil.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
88
Technical data and ordering
Flare
Solder (Cu-plated - ODF)
Type
Conn.
in.
Code no.
Conn.
mm
Code no.
Type
Conn.
in.
1
/4
023Z1473
6
023Z1461
DMB 082
1
6
023Z1412
/4
DMB 083s
3
/8
023Z1472
10
023Z1459
DMB 083
3
10
023Z1411
DMB 084s
1
/2
023Z1471
12
023Z1457
DMB 084
1
12
023Z1410
DMB 163s
3
/8
023Z1476
10
023Z1455
DMB 162
1
6
023Z1416
DMB 164s
1
/2
023Z1475
12
023Z1453
DMB 163
3
10
023Z1415
DMB 165s
5
/8
023Z1474
16
023Z1474
DMB 164
1
12
023Z1414
DMB 304s
1
/2
023Z1479
12
023Z1451
DMB 165
5
16
023Z1413
DMB 305s
5
/8
023Z1478
16
023Z1478
DMB 303
3
10
023Z1419
DMB 307s
7
/8
023Z1477
22
023Z1477
DMB 304
1
12
023Z1418
DMB 305
5
16
023Z1417
/8
/2
/4
/8
/2
/8
/8
/2
/8
Drying and liquid capacity
R134a, R507, R404A, R407C, R410A, R22
Drying capacity [kg refrigerant] 1)
Type
1
Code no.
DMB 082s
R404A
R507
R134a
Liquid capacity [kW] 2)
R407C
R410A
R22
R134a
R404A
R507
R22
R407C
R410A
Max
Working
Pressure
PS
[bar]
24°C
52°C
24°C
52°C
24°C
52°C
24°C
52°C
DMB 082 / 082s
DMB 083 / 083s
DMB 084 / 084s
9.2
8.5
8.7
8.1
8.0
7.3
8.7
8.0
3.9
7.4
8.3
2.8
5.3
6.0
4.3
8.2
9.2
42
42
42
DMB 162
DMB 163 / 163s
DMB 164 / 164s
DMB 165 / 165s
17.8
16.5
16.8
15.7
15.4
14.1
16.8
15.6
7.6
18
28
37
5.3
13
20
29
8.8
20
32
40
42
42
42
42
DMB 303
DMB 304 / 304s
DMB 305 / 305s
DMB 307s
43.5
40.4
41.4
38.4
37.8
34.6
41.2
38.1
19
28
38
43
15
20
28
32
21
31
42
47
42
42
42
35
) Drying capacity is based on following moisture content test
standards before and after drying:
R134a:
From 1050 ppm W to 75 ppm W. If drying to 50 ppm W is required,
reduce stated capacities by 15%.
R404A, R507: From 1020 ppm W to 30 ppm W.
R407C:
From 1020 ppm W to 30 ppm W.
R410A:
From 1050 ppm W to 60 ppm W.
R22:
From 1050 ppm W to 60 ppm W in accordance with ARI 710-86.
2
) Capacity given in accordance with ARI 710-86
te = −15°C (5°F)
tc = 30°C (86°F)
∆p = 0.07 bar (1 psig).
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Bi-flow filter driers – DMB
89
DMC: Combined filter drier and receiver
These filters contain a solid core consisting of 100% Molecular Sieve. DMC filter driers are especially
suitable for A/C systems with HFC refrigerant and polyolester oil with additives.
Under operating conditions where the condenser cannot contain the total quantity of refrigerant, a
receiver might be necessary.
This extra receiver capacity can be provided by using a DMC combined receiver and filter drier.
Features
Eliminator® core for
optimal drying capacity
Felt pad protecting
core from breaking up
due to vibrations
Effective dirt removal
to 25 μm
Copper plated steel solder
connections
Powder painted surface to
prevent corrosion
Receiver
Perforated plate - to keep
internal parts in position
Applications
Advantages
Facts
· Air conditioning systems
· Combination of filter drier and
receiver
· DMC filter driers contain a solid core
consisting of 100% 3Å Molecular Sieve.
· Space-saving
· Fast installation
· Available with solder connections
(Cu-plated steel connectors)
· High drying capacity at high and low
liquid temperatures
· Optimum flow characteristics and dirt
retention
· Heat pumps
G R U P A
· Specially designed for HCFC refrigerants and mineral oil, and also with HFC
refrigerants and polyolester oil.
· Approved as HP container according to
PED 97/23/EC - a3p3
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
90
Technical data and ordering
Industrial pack
Connections
Cu-plated
(ODF)
Type
Code no.
Qty.
Multi-pack
Code no.
Qty.
DMC 0432s
6 mm
023Z7012
16
023Z7019
28
DMC 0732s
6 mm
023Z7013
16
023Z7020
28
DMC 2032s
DMC 2032s
DMC 2033s
DMC 2033s
DMC 2034s
DMC 2034s
6 mm
1
/4 in
10 mm
3
/8 in
12 mm
1
/2 in
023Z7007
023Z7008
023Z7014
023Z7009
023Z7015
023Z7010
10
10
10
10
10
10
023Z7021
023Z7022
023Z7023
023Z7024
023Z7025
023Z7026
18
18
18
18
18
18
DMC 40163s
DMC 40163s
DMC 40164s
DMC 40164s
10 mm
3
/8 in
12 mm
1
/2 in
023Z7016
023Z7017
023Z7018
023Z7011
6
6
6
6
023Z7027
023Z7028
023Z7029
023Z7030
10
10
10
10
Capacity
Drying and liquid capacity
R134a, R507, R404A, R407C, R410A, R22
Drying Capacity (kg of refrigerant)1)
R410A
R407C
Type
24°C
R22
52°C
24°C
Liquid Capacity (kW)2)
R404A
R507
R134a
52°C
24°C
52°C
24°C
52°C
R22
R410A
R407C
R134a
R404A
R507
Max.
Working
Pressure PS
[bar]
DMC 0432s
5.9
5.4
6.4
5.9
6.4
5.9
6.3
6.0
7.5
7.0
5.0
42
DMC 0732s
5.9
5.4
6.4
5.9
6.4
5.9
6.3
6.0
7.5
7.0
5.0
42
DMC 2032s
DMC 2033s
DMC 2034s
5.9
5.4
6.4
5.9
6.4
5.9
6.3
6.0
7.5
21.0
26.5
7.0
19.0
24.0
5.0
14.0
18.5
42
DMC 40163s
DMC 40164s
25.8
23.7
28.1
26.0
28.3
26.0
27.8
26.2
23.0
28.5
21.0
26.0
15.0
19.5
42
1
) Drying capacity is based on following moisture content in the refrigerant before and after 2) Given in accordance with
drying:
ARI 710-86 for
R22:
te = –15°C (5°F),
From 1050 ppm W to 60 ppm W in accordance with ARI 710-86.
tc = 30°C (86°C) and
R134a:
∆p = 0.07 bar (1 psig).
From 1050 ppm W to 75 ppm W. If drying of refrigerant to 50 ppm W is required, this can be
achieved with a 15% reduction of the stated capacities.
R404A, R407C og R507:
From 1020 ppm W to 30 ppm W.
R410A:
From 1050 ppm W to 60 ppm W.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Combi filter driers – DMC
91
DAS: Clean up your refrigerant
Eliminator ® burn-out filter driers type DAS are used in the suction line to clean up refrigeration and
AC-systems with flourinated refrigerants after a compressor motor burn-out.
The solid core, which is composed of 70% activated alumina and 30% Molecular Sieve, adsorbs harmful
acids as well as moisture. By adsorbing these acids, the DAS burn-out filter drier protects the new compressor against premature failure.
Features
Solid core with 70% activated alumina
and 30% Molecular Sieve for adsorption
of acid and moisture
2 Schraeder access valves to measure
pressure drop across the drier
120 mesh wire mesh provides
solid particle retention with
minimal pressure drop
Felt pad protecting core from
breaking up due to vibrations
Flare or solder connections
(pure copper)
Corrosion resistant powderpainted finish
Applications
Advantages
Facts
· Traditional refrigeration
· The large diameter of the burn-out
filter drier means that flow velocity
is suitably low and the pressure drop
minimal.
· Allows installation with any orientation
provided the flow is in the arrow
direction
· Air conditioning units
· Transport refrigeration
· Available in sizes from 8 to 60 cubic
inches
· For use with CFC, HCFC and HFC
refrigerants
G R U P A
· Powder formation is eliminated
because the solid core grains are
bonded and cannot move against
each other.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
92
Technical data and ordering
Ordering
Solder
Flare
Connection
in.
Type
3
DAS 083
DAS 084
Code no.
/8
/2
023Z1001
023Z1002
1
1
DAS 164
DAS 165
/2
/8
023Z1007
023Z1008
5
Connection
in.
Type
Code no.
DAS 083
DAS 084
DAS 085
DAS 086
3
/8
/2
/8
3
/4
023Z1003
023Z1004
023Z1005
023Z1006
DAS 164
DAS 165
DAS 166
DAS 167
1
/2
/8
3
/4
7
/8
023Z1009
023Z1010
023Z1011
023Z1012
DAS 305
DAS 306
DAS 307
DAS 309
5
/8
/4
7
/8
11/8
023Z1013
023Z1014
023Z1015
023Z1016
DAS 417
DAS 419
7
/8
11/8
023Z1017
023Z1018
DAS 607
DAS 609
7
/8
11/8
023Z1019
023Z1020
1
5
5
3
Rated capacity, Qn 1)
R22/R407C/R410A
Capacities
1
Acid capacity2)
R134a
R404A/R507
[TR]
[kW]
[TR]
[kW]
[TR]
[kW]
[g]
DAS 083
DAS 084
DAS 085
DAS 086
1.7
2.9
4.1
5.4
6.0
10.0
14.5
19.0
1.0
1.6
2.6
3.3
3.5
5.5
9.0
11.5
1.3
2.3
3.6
4.7
4.5
8.0
12.5
16.5
3.8
DAS 164
DAS 165
DAS 166
DAS 167
3.0
4.3
5.7
6.3
10.5
15.0
20.0
22.0
1.7
2.7
3.4
3.9
6.0
9.5
12.0
13.5
2.4
3.7
4.9
5.4
8.5
13.0
17.0
19.0
8.6
DAS 305
DAS 306
DAS 307
DAS 309
5.1
6.3
7.4
8.9
18.0
22.0
26.0
31.0
3.1
4.0
4.6
5.7
11.0
14.0
16.0
20.0
4.3
5.4
6.3
7.7
15.0
19.0
22.0
27.0
18.2
DAS 417
DAS 419
8.6
10.0
30.0
35.0
5.1
6.3
18.0
22.0
7.1
8.6
25.0
30.0
24.3
DAS 607
5.7
20.0
3.4
12.0
4.9
17.0
36.5
2
) Rated capacity is stated at:
evaporating temperature te = 4°C
pressure drop Δp = 0.21 bar
) Adsorption capacity of oleic acid at
0.05 TAN (Total Acid Number).
Qe / Fe = Qn
Capacities for other temperatures than 4°C are
calculated by use of correction factors. Divide
your actual evaporator capacity with the correction factor given for your actual evaporating
temperature.
Look up the capacity table for the necessary
rated capacity.
Qe = Actual evaporator capacity
Qn = Nominal capacity
Fe = Correction factor
Correction factors. Fe evaporating temperatures [°C]
[°C]
4
0
–5
–10
–15
–20
–25
–30
–35
–40
Fe
1
0.9
0.75
0.6
0.5
0.4
0.35
0.25
0.2
0.15
G R U P A
Example
To select a burn-out filter drier for a R22 plant
with an evaporator capacity at 8.5 kW at –20°C
you may use a burn-out filter drier with a rated
capacity of 8.5/0.4 = 21.25 kW or bigger.
For example DAS 306.
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Burn-out filter drier – DAS
93
SVA - Stop valves
SVA are angleway and straightway stop valves which are designed to meet all industrial refrigeration
application requirements. The valves are designed to give favourable flow characteristics and are easy to
dismantle and repair when necessary. The valve cone is designed to ensure perfect closing.
Advantages and features
· Applicable to all common refrigerants including R717 and
non corrosive gases/liquids
· Optional accessories:
- Heavy duty industrial hand wheel for frequent operation
- Cap for infrequent operation
- Lock washers for the stop valves subjected
to high vibrations/pulsations
· Standard bonnet is suitable for installation in normal
insulated systems
· Exact capacity and setting of the valve can be calculated
for all refrigerants by means of DIRcalc™ (Danfoss Industrial
Refrigeration calculation programme). Please contact your local
Danfoss Sales Company to have your own copy of DIRcalc™.
· Classification:
To get an updated list of certification on the products please
contact your local Danfoss Sales Company.
· Internal metal backseating - DN 6 - 65 (1/4 - 2½ in.)
Internal PTFE backseating - DN 80 - 300 (3 - 12 in.)
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
94
d.o.o.
· SVA-HS valves has an extended bonnet, suitable for
insulated low temperature applications.
· Housing and bonnet material for SVA-ST, -DL, -DH and HS is
low temperature steel according to requirements of the
Pressure Equipment Directive and other international
classification authorities.
SVA-SS housing material is special cold resistant stainless steel
approved for low temperature operations
G R U P A
· The valves and caps are prepared for sealing, to prevent
operation by unauthorized persons, using a seal wire
· Accepts flow in both directions
Technical data and code numbers
The SVA stop valve range cover valves from DN 6 (¼ in.) up to DN 300 (12 in.)
· SVA-ST is the Danfoss standard industrial valve series up to DN 200.
· SVA-DL and SVA-DH are the large industrial valves with a balanced design that allows opening of the valves with a limited torque.
Sizes from DN 250 (10 in.) up to DN 300 (12 in)
· SVA-HS is the Danfoss valve series with higher specification for i.e. the petrochemical industry.
· SVA-SS is the Danfoss stainless steel industrial valve series.
Technical data
Refrigerants
Temperature range
Pressure range
SVA 6 - 10 and SVA-ST
Applicable to all common non
flammable refrigerants including
R717 and non corrosive gases/
liquids
–50/+150°C
The valves are designed for max.
working pressure 40 bar g. Valves
for higher working pressure are
available on request.
SVA-HS
Applicable to all common
refrigerants including flammable
hydrocarbons and all non-corrosive
gases/liquids.
–60/+150°C
The valves are designed for max.
working pressure 40 bar g. Valves
for higher working pressure are
available on request.
SVA -Dl and SVA-DH
Applicable to all common non
flammable refrigerants including
R717 and non corrosive gases/
liquids
–60/+150°C
The valves are designed for max.
working pressure 40 bar g. Valves
for higher working pressure are
available on request.
SVA - SS
Applicable to all common non
flammable refrigerants including
R717 and non corrosive gases/
liquids
–60/+150°C
Are designed for max. working
pressure 52 bar.
For further information please see installation instructions for SVA-ST, HS and SS or for SVA - DL and SVA - DH
Code numbers
SVA-ST stop valves:
DIN
Size
mm
in.
15
½
15
½
20
¾
20
¾
25
1
25
1
32
1¼
32
1¼
40
1½
40
1½
50
2
50
2
65
2½
65
2½
80
3
80
3
100
4
100
4
125
5
125
5
150
6
150
6
200
8
200
8
Angleway
Type
SVA-ST 15 D ANG H-Wheel
SVA-ST 15 D ANG Cap
SVA-ST 20 D ANG H-Wheel
SVA-ST 20 D ANG Cap
SVA-ST 25 D ANG H-Wheel
SVA-ST 25 D ANG Cap
SVA-ST 32 D ANG H-Wheel
SVA-ST 32 D ANG Cap
SVA-ST 40 D ANG H-Wheel
SVA-ST 40 D ANG Cap
SVA-ST 50 D ANG H-Wheel
SVA-ST 50 D ANG Cap
SVA-ST 65 D ANG H-Wheel
SVA-ST 65 D ANG Cap
SVA-ST 80 D ANG H-Wheel
SVA-ST 80 D ANG Cap
SVA-ST 100 D ANG H-Wheel
SVA-ST 100 D ANG Cap
SVA-ST 125 D ANG H-Wheel
SVA-ST 125 D ANG Cap
SVA-ST 150 D ANG H-Wheel
SVA-ST 150 D ANG Cap
SVA-ST 200 D ANG H-Wheel
SVA-ST 200 D ANG Cap
Code number
148B3361
148B3362
148B3441
148B3442
148B3521
148B3522
148B3601
148B3602
148B3681
148B3682
148B3032
148B3033
148B3044
148B3045
148B3061
148B3062
148B3101
148B3102
148B3141
148B3142
148B3181
148B3182
148B3221
148B3222
DIN
Size
mm
in.
15
½
15
½
20
¾
20
¾
25
1
25
1
32
1¼
32
1¼
40
1½
40
1½
50
2
50
2
65
2½
65
2½
80
3
80
3
100
4
100
4
125
5
125
5
150
6
150
6
200
8
200
8
Straightway
Type
SVA-ST 15 D STR H-Wheel
SVA-ST 15 D STR Cap
SVA-ST 20 D STR H-Wheel
SVA-ST 20 D STR Cap
SVA-ST 25 D STR H-Wheel
SVA-ST 25 D STR Cap
SVA-ST 32 D STR H-Wheel
SVA-ST 32 D STR Cap
SVA-ST 40 D STR H-Wheel
SVA-ST 40 D STR Cap
SVA-ST 50 D STR H-Wheel
SVA-ST 50 D STR Cap
SVA-ST 65 D STR H-Wheel
SVA-ST 65 D STR Cap
SVA-ST 80 D STR H-Wheel
SVA-ST 80 D STR Cap
SVA-ST 100 D STR H-Wheel
SVA-ST 100 D STR Cap
SVA-ST 125 D STR H-Wheel
SVA-ST 125 D STR Cap
SVA-ST 150 D STR H-Wheel
SVA-ST 150 D STR Cap
SVA-ST 200 D STR H-Wheel
SVA-ST 200 D STR Cap
Code number
148B3401
148B3402
148B3481
148B3482
148B3561
148B3562
148B3641
148B3642
148B3711
148B3712
148B3038
148B3039
148B3050
148B3051
148B3081
148B3082
148B3121
148B3122
148B3161
148B3162
148B3201
148B3202
148B3241
148B3242
SVA-DL stop valves:
DIN
Size
mm
in.
250
10
250
10
300
12
300
12
Type
SVA-DL 250 D CAP
SVA-DL 250 D H-HEEL
SVA-DL 300 D CAP
SVA-DL 300 D H-WHEEL
Code number
148B3760
148B3761
148B3770
148B3771
SVA-DH stop valves:
Type
SVA-DH 250 D CAP
SVA-DH 250 D H-WHEEL
SVA-DH 300 D CAP
SVA-DH 300 D H-WHEEL
Code number
148B3764
148B3765
148B3774
148B3775
G R U P A
DIN
Size
mm
in.
250
10
250
10
300
12
300
12
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Stop valves – SVA
95
Code numbers
SVA-HS stop valves:
DIN
Size
mm
in.
15
½
15
½
20
¾
20
¾
25
1
25
1
32
1¼
32
1¼
40
1½
40
1½
50
2
50
2
65
2½
65
2½
80
3
80
3
100
4
100
4
125
5
125
5
150
6
150
6
200
8
200
8
Angleway
Type
SVA-HS 15 D ANG H-Wheel
SVA-HS 15 D ANG Cap
SVA-HS 20 D ANG H-Wheel
SVA-HS 20 D ANG Cap
SVA-HS 25 D ANG H-Wheel
SVA-HS 25 D ANG Cap
SVA-HS 32 D ANG H-Wheel
SVA-HS 32 D ANG Cap
SVA-HS 40 D ANG H-Wheel
SVA-HS 40 D ANG Cap
SVA-HS 50 D ANG H-Wheel
SVA-HS 50 D ANG Cap
SVA-HS 65 D ANG H-Wheel
SVA-HS 65 D ANG Cap
SVA-HS 80 D ANG H-Wheel
SVA-HS 80 D ANG Cap
SVA-HS 100 D ANG H-Wheel
SVA-HS 100 D ANG Cap
SVA-HS 125 D ANG H-Wheel
SVA-HS 125 D ANG Cap
SVA-HS 150 D ANG H-Wheel
SVA-HS 150 D ANG Cap
SVA-HS 200 D ANG H-Wheel
SVA-HS 200 D ANG Cap
Code number
148B3367
148B3368
148B3447
148B3448
148B3527
148B3528
148B3607
148B3608
148B3687
148B3688
148B3267
148B3268
148B3327
148B3328
148B3067
148B3068
148B3107
148B3108
148B3147
148B3148
148B3187
148B3188
148B3227
148B3228
DIN
Size
mm
in.
15
½
15
½
20
¾
20
¾
25
1
25
1
32
1¼
32
1¼
40
1½
40
1½
50
2
50
2
65
2½
65
2½
80
3
80
3
100
4
100
4
125
5
125
5
150
6
150
6
200
8
200
8
Straightway
Type
Code number
SVA-HS 15 D STR H-Wheel
SVA-HS 15 D STR Cap
SVA-HS 20 D STR H-Wheel
SVA-HS 20 D STR Cap
SVA-HS 25 D STR H-Wheel
SVA-HS 25 D STR Cap
SVA-HS 32 D STR H-Wheel
SVA-HS 32 D STR Cap
SVA-HS 40 D STR H-Wheel
SVA-HS 40 D STR Cap
SVA-HS 50 D STR H-Wheel
SVA-HS 50 D STR Cap
SVA-HS 65 D STR H-Wheel
SVA-HS 65 D STR Cap
SVA-HS 80 D STR H-Wheel
SVA-HS 80 D STR Cap
SVA-HS 100 D STR H-Wheel
SVA-HS 100 D STR Cap
SVA-HS 125 D STR H-Wheel
SVA-HS 125 D STR Cap
SVA-HS 150 D STR H-Wheel
SVA-HS 150 D STR Cap
SVA-HS 200 D STR H-Wheel
SVA-HS 200 D STR Cap
148B3407
148B3408
148B3487
148B3488
148B3567
148B3568
148B3647
148B3648
148B3717
148B3718
148B3297
148B3298
148B3347
148B3348
148B3087
148B3088
148B3127
148B3128
148B3167
148B3168
148B3207
148B3208
148B3247
148B3248
SVA-SS 15 D STR Cap 52 bar
SVA-SS 15 D STR H-Wheel 52 bar
SVA-SS 20 D STR Cap 52 bar
SVA-SS 20 D STR H-Wheel 52 bar
SVA-SS 25 D STR Cap 52 bar
SVA-SS 25 D STR H-Wheel 52 bar
SVA-SS 32 D STR Cap 52 bar
SVA-SS 32 D STR H-Wheel 52 bar
SVA-SS 40 D STR Cap 52 bar
SVA-SS 40 D STR H-Wheel 52 bar
SVA-SS 50 D STR Cap 52 bar
SVA-SS 50 D STR H-Wheel 52 bar
SVA-SS 65 D STR Cap 52 bar
SVA-SS 65 D STR H-Wheel 52 bar
148B4249
148B4250
148B4251
148B4252
148B4253
148B4254
148B4255
148B4256
148B4257
148B4258
148B4259
148B4260
148B4261
148B4262
SVA-SS (stainless steel) stop valves
15
15
20
20
25
25
32
32
40
40
50
50
65
65
½
½
¾
¾
1
1
1¼
1¼
1½
1½
2
2
2½
2½
SVA-SS 15 D ANG Cap 52 bar
SVA-SS 15 D ANG H-Wheel 52 bar
SVA-SS 20 D ANG Cap 52 bar
SVA-SS 20 D ANG H-Wheel 52 bar
SVA-SS 25 D ANG Cap 52 bar
SVA-SS 25 D ANG H-Wheel 52 bar
SVA-SS 32 D ANG Cap 52 bar
SVA-SS 32 D ANG H-Wheel 52 bar
SVA-SS 40 D ANG Cap 52 bar
SVA-SS 40 D ANG H-Wheel 52 bar
SVA-SS 50 D ANG Cap 52 bar
SVA-SS 50 D ANG H-Wheel 52 bar
SVA-SS 65 D ANG Cap 52 bar
SVA-SS 65 D ANG H-Wheel 52 bar
148B3843
148B3844
148B3845
148B3846
148B3847
148B3848
148B3849
148B3850
148B3851
148B3852
148B3853
148B3854
148B3855
148B3856
15
15
20
20
25
25
32
32
40
40
50
50
65
65
½
½
¾
¾
1
1
1¼
1¼
1½
1½
2
2
2½
2½
- For a complete range of valves with ANSI, Socket and threaded connection please see the
- Example: SVA-HS 32 DIN angleway with hand wheel = 148B3607
technical leaflet for further information and code numbers
- Important! Where products need to be certified according to specific certification societies or
where higher pressures are required, the relevant information should be included at the time of - D = Butt-weld DIN, ANG= Angle-way, STR = Straight-way, Cap = Cap, H-Wheel = Hand wheel
order
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
96
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Stop valves – SVA
97
REG and REG-SS - Regulating valves
REG and REG-SS are regulating valves which are available as angle-way and straight-way valves. When
they are in closed position they act as a normal stop valve. The valves are designed to meet the strict
quality requirements on refrigerating installations specified by the international classification societies
and are carefully designed to present favourable flow conditions and accurate linear characteristics. REG
are equipped with vented cap and have internal backseating enabling the spindle seal to be replaced
with the valve still under pressure.
Advantages and features
· Applicable to all common non flammable refrigerants
including R 717 and non corrosive gases/liquids.
· Designed to ensure perfect regulation.
· Internal backseating enables replacement of the spindle
seal whilst the valve is active, i.e. under pressure.
· Easy to disassemble for inspection and possible repair.
· Classification: To get an updated list of certification on the
products please contact your local Danfoss Sales Company.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
98
d.o.o.
· Housing and bonnet material is low temperature steel
according to requirements of the Pressure Equipment
Directive and other international classification authorities.
REG-SS housing material in special cold resistant stainless
steel approved for low temperature operations.
G R U P A
· Act as a normal stop valve in closed position.
· Exact capacity and setting of the valve can be calculated
for all refrigerants by means of "DIRcalc™" (Danfoss Industrial
Refrigeration calculation programme).
Please contact your local Danfoss Sales Company to have
your own copy of DIRcalc.
Technical data and code numbers
Technical data
REG
Flow coefficients for fully opened valves from
kv = 0.17 to 81.4 m3/h
–50/+150°C
Flow coefficients
REG-SS
Flow coefficients for fully opened valves from
kv = 0.17 to 81.4 m3/h
–60/+150°C
Temperatur range
Pressure range
40 bar g
Max. operating pressure
Please see the technical leaflet for further details
Valves for higher working pressure are available on request.
52 bar g
Code numbers
DIN
Size
mm in.
6
6
6
10
10
10
15
15
15
15
15
20
20
20
20
25
25
25
25
32
32
32
40
40
40
50
65
¼
¼
¼
⁄
⁄
⁄
½
½
½
½
½
¾
¾
¾
¾
1
1
1
1
1¼
1¼
1¼
1½
1½
1½
2
2½
Angleway
Type designation
Code number
REG 6 D ANG CONE#1
REG 6 D ANG CONE#2
REG 6 D ANG CONE#3
REG 10 D ANG CONE#1
REG 10 D ANG CONE#2
REG 10 D ANG CONE#3
REG 15 D ANG CONE#3
REG 15 D ANG CONE#4
REG 15 D ANG CONE#5
REG 15 D ANG CONE#6
REG 15 D ANG CONE#7
REG 20 D ANG CONE#4
REG 20 D ANG CONE#5
REG 20 D ANG CONE#6
REG 20 D ANG CONE#7
REG 25 D ANG CONE#4
REG 25 D ANG CONE#5
REG 25 D ANG CONE#6
REG 25 D ANG CONE#7
REG 32 D ANG CONE#8
REG 32 D ANG CONE#9
REG 32 D ANG CONE#10
REG 40 D ANG CONE#8
REG 40 D ANG CONE#9
REG 40 D ANG CONE#10
REG 50 D ANG CONE#11
REG 65 D ANG CONE#12
2415+426
2415+427
2415+428
2415+432
2415+433
2415+434
2415+883
148G3239
148G3240
148G3241
148G3242
148G3247
148G3248
148G3249
148G3250
148G3255
148G3256
148G3257
148G3258
148G3263
148G3264
148G3265
148G3269
148G3270
148G3271
148G3485
148G3486
DIN
Size
mm in.
6
6
6
10
10
10
15
15
15
15
20
20
20
20
25
25
25
25
32
32
32
40
40
40
¼
¼
¼
⁄
⁄
⁄
½
½
½
½
¾
¾
¾
¾
1
1
1
1
1¼
1¼
1¼
1½
1½
1½
Straightway
Type
Code number
REG 6 D STR CONE#1
REG 6 D STR CONE#2
REG 6 D STR CONE#3
REG 10 D STR CONE#1
REG 10 D STR CONE#2
REG 10 D STR CONE#3
REG 15 D STR CONE#4
REG 15 D STR CONE#5
REG 15 D STR CONE#6
REG 15 D STR CONE#7
REG 20 D STR CONE#4
REG 20 D STR CONE#5
REG 20 D STR CONE#6
REG 20 D STR CONE#7
REG 25 D STR CONE#4
REG 25 D STR CONE#5
REG 25 D STR CONE#6
REG 25 D STR CONE#7
REG 32 D STR CONE#8
REG 32 D STR CONE#9
REG 32 D STR CONE#10
REG 40 D STR CONE#8
REG 40 D STR CONE#9
REG 40 D STR CONE#10
2415+429
2415+430
2415+431
2415+435
2415+436
2415+437
148G3243
148G3244
148G3245
148G3246
148G3251
148G3252
148G3253
148G3254
148G3259
148G3260
148G3261
148G3262
148G3266
148G3267
148G3268
148G3273
148G3274
148G3275
REG valves in stainless steel
DIN
Size
mm in.
½
½
½
½
¾
¾
¾
¾
1
1
1
1
1¼
1¼
1¼
1½
1½
1½
Code number
REG-SS 15 D ANG CONG#4 Reg valve 52 bar
REG-SS 15 D ANG CONG#5 Reg valve 52 bar
REG-SS 15 D ANG CONG#6 Reg valve 52 bar
REG-SS 15 D ANG CONG#7 Reg valve 52 bar
REG-SS 20 D ANG CONG#4 Reg valve 52 bar
REG-SS 20 D ANG CONG#5 Reg valve 52 bar
REG-SS 20 D ANG CONG#6 Reg valve 52 bar
REG-SS 20 D ANG CONG#7 Reg valve 52 bar
REG-SS 25 D ANG CONG#4 Reg valve 52 bar
REG-SS 25 D ANG CONG#5 Reg valve 52 bar
REG-SS 25 D ANG CONG#6 Reg valve 52 bar
REG-SS 25 D ANG CONG#7 Reg valve 52 bar
REG-SS 32 D ANG CONG#8 Reg valve 52 bar
REG-SS 32 D ANG CONG#9 Reg valve 52 bar
REG-SS 32 D ANG CONG#10 Reg valve 52 bar
REG-SS 40 D ANG CONG#8 Reg valve 52 bar
REG-SS 40 D ANG CONG#9 Reg valve 52 bar
REG-SS 40 D ANG CONG#10 Reg valve 52 bar
148G3542
148G3543
148G3544
148G3545
148G3546
148G3547
148G3548
148G3549
148G3550
148G3551
148G3552
148G3553
148G3555
148G3556
148G3554
148G3558
148G3559
148G3557
DIN
Size
mm in.
15
15
15
15
20
20
20
20
25
25
25
25
32
32
32
40
40
40
½
½
½
½
¾
¾
¾
¾
1
1
1
1
1¼
1¼
1¼
1½
1½
1½
Straightway
Type designation
REG-SS 15 D STR CONG#4 Reg valve 52 bar
REG-SS 15 D STR CONG#5 Reg valve 52 bar
REG-SS 15 D STR CONG#6 Reg valve 52 bar
REG-SS 15 D STR CONG#7 Reg valve 52 bar
REG-SS 20 D STR CONG#4 Reg valve 52 bar
REG-SS 20 D STR CONG#5 Reg valve 52 bar
REG-SS 20 D STR CONG#6 Reg valve 52 bar
REG-SS 20 D STR CONG#7 Reg valve 52 bar
REG-SS 25 D STR CONG#4 Reg valve 52 bar
REG-SS 25 D STR CONG#5 Reg valve 52 bar
REG-SS 25 D STR CONG#6 Reg valve 52 bar
REG-SS 25 D STR CONG#7 Reg valve 52 bar
REG-SS 32 D STR CONG#8 Reg valve 52 bar
REG-SS 32 D STR CONG#9 Reg valve 52 bar
REG-SS 32 D STR CONG#10 Reg valve 52 bar
REG-SS 40 D STR CONG#8 Reg valve 52 bar
REG-SS 40 D STR CONG#9 Reg valve 52 bar
REG-SS 40 D STR CONG#10 Reg valve 52 bar
Code number
148G3640
148G3641
148G3642
148G3643
148G3644
148G3645
148G3646
148G3647
148G3648
148G3649
148G3650
148G3651
148G3653
148G3654
148G3652
148G3656
148G3657
148G3655
- Example: REG 15 DIN angleway with cone no. 7 = 148G3242
- To find the complete range of valves with ANSI, socket and threaded connections please study the technical leaflet for further information and code numbers.
- D = Butt-weld DIN
A = ANSI
ANG= Angle-way
STR = Straight-way
d.o.o.
- Important! Where products need to be certified according to specific certification societies or where higher pressures are required, the relevant information should
be included at the time of ordering.
G R U P A
15
15
15
15
20
20
20
20
25
25
25
25
32
32
32
40
40
40
Angleway
Type designation
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Regulating valves – REG and REG-SS
99
FIA, FIA-SS - Filters
FIA filters are a range of angle-way and straight-way filters which are carefully designed to give favourable flow conditions. The design makes the filter easy to install, and ensures quick filter inspection and
cleaning.
FIA filters are used ahead of automatic controls, pumps, compressors etc. for initial plant start-up and
where permanent filtration of the refrigerant is required. The filter reduces the risk of undesirable system
breakdowns and reduces wear and tear on plant components.
Advantages and features
· Applicable to all common refrigerants including R717 and
non corrosive gasses/liquids
· FIA filters are sold as a parts programme, where filter
housing and filter element is ordered as separate code numbers. This gives a high degree of flexibility
· Each filter housing is clearly marked with type, size and
performance range
· The filter housing is made of low temperature steel (FIA) or
stainless steel (FIA-SS) in accordance with the requirements
of the Pressure Equipment Directive and those of other
international classification authorities
* Mesh is the number of threads per inch.
· FIA 15-40 (½ – 1 ½ in.): A special insert (50μ) can be used in
μ (microns) is the distance between two threads
combination with a standard version when cleaning a plant
(1μ = 1 /1000 mm).
during
commissioning
start
MB FRIGO
Grupa d.o.o.,and
Bani
81, up
10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
100
d.o.o.
· Two types of filter elements are available:
- A plain filter element of stainless steel for all sizes
- A pleated filter element (DN 15-200) with extra large
surface, which ensures long intervals between cleaning
and low pressure drop
· FIA 50 - 200 (2 - 10 in.) can be equipped with a magnetic insert
for detension of iron particles and other magnetic particles
G R U P A
· The filter elements, which are made of stainless steel can be
mounted in the filter housing without extra gaskets, which
means easy service
· FIA 50 - 200 (2 - 10 in.) can be equipped with a large capacity
filter bag (50μ) can be inserted for cleaning plant during
commissioning and start up
Technical data, code numbers and accessories
Technical data
FIA
FIA-SS
Refrigerants
Applicable to all common refrigerants including flammable refrigerants
and all non-corrosive gases/liquids.
Applicable to all common refrigerants including flammable refrigerants
and all non-corrosive gases/liquids.
Temperatur range
–60°C/+150°C
–60°C/+150°C
Pressure range
Max. working pressure
40 bar g
52 bar g
For further information please see installation instruction for FIA.
Code numbers
Size
Type
mm
in.
15
15
20
20
25
25
32
32
40
40
50
50
65
65
80
80
100
100
125
125
150
150
200
200
250
300
½
½
¾
¾
1
1
1¼
1¼
1½
1½
2
2
2½
2½
3
3
4
4
5
5
6
6
8
8
10
12
FIA 15 D ANG
FIA 15 D STR
FIA 20 D ANG
FIA 20 D STR
FIA 25 D ANG
FIA 25 D STR
FIA 32 D ANG
FIA 32 D STR
FIA 40 D ANG
FIA 40 D STR
FIA 50 D ANG
FIA 50 D STR
FIA 65 D ANG
FIA 65 D STR
FIA 80 D ANG
FIA 80 D STR
FIA 100 D ANG
FIA 100 D STR
FIA 125 D ANG
FIA 125 D STR
FIA 150 D ANG
FIA 150 D STR
FIA 200 D ANG
FIA 200 D STR
FIA 250 D ANG
FIA 300 D ANG
Filter housing
without filter
element
148H3051
148H3085
148H3052
148H3086
148H3053
148H3087
148H3054
148H3088
148H3055
148H3089
148H3056
148H3090
148H3057
148H3091
148H3058
148H3092
148H3059
148H3093
148H3060
148H3094
148H3061
148H3095
148H3062
148H3096
148H3171
148H3172
Filter
element
100μ
150 mesh
Filter
element
150μ
100 mesh
Filter
element
250μ
72 mesh
Filter
element
500μ
38 mesh
Pleated filter
element
150μ
100 mesh
Pleated filter
element
250μ
72 mesh
Pleated filter
element
500μ
38 mesh
148H3122
148H3124
148H3126
148H3128
148H3303
-
-
148H3123
148H3125
148H3127
148H3129
148H3304
148H3269
-
148H3157
148H3130
148H3138
148H3144
148H3179
148H3184
148H3189
-
148H3131
148H3139
148H3145
148H3180
148H3185
148H3190
-
148H3119
148H3120
148H3121
148H3181
148H3186
148H3191
-
148H3132
148H3140
148H3146
148H3182
148H3187
148H3192
-
148H3133
148H3141
148H3147
148H3183
148H3188
148H3193
-
148H3134
148H3142
148H3148
148H3226
-
-
-
148H3135
148H3143
148H3149
-
-
-
-
148H3136
148H3137
148H3175
148H3176
148H3177
148H3178
-
-
-
FIA filters in stainless steel
FIA-SS Straight flow
Size
mm
15
20
25
32
40
50
65
in.
½
¾
1
1¼
1½
2
2½
FIA-SS Angle flow
Type designation
Code number
FIA-SS 15 D STR Filter Housing 52 bar
FIA-SS 20 D STR Filter Housing 52 bar
FIA-SS 25 D STR Filter Housing 52 bar
FIA-SS 32 D STR Filter Housing 52 bar
FIA-SS 40 D STR Filter Housing 52 bar
FIA-SS 50 D STR Filter Housing 52 bar
FIA-SS 65 D STR Filter Housing 52 bar
148H3285
148H3286
148H3287
148H3288
148H3289
148H3290
148H3291
Size
mm
15
20
25
32
40
50
65
in.
½
¾
1
1¼
1½
2
2½
Type designation
Code number
FIA-SS 15 D ANG Filter Housing 52 bar
FIA-SS 20 D ANG Filter Housing 52 bar
FIA-SS 25 D ANG Filter Housing 52 bar
FIA-SS 32 D ANG Filter Housing 52 bar
FIA-SS 40 D ANG Filter Housing 52 bar
FIA-SS 50 D ANG Filter Housing 52 bar
FIA-SS 65 D ANG Filter Housing 52 bar
148H3221
148H3222
148H3223
148H3224
148H3225
148H3283
148H3284
Danfoss has developed a range of accessories which improve the utility of the filters i.e. a magnetic insert may catch metal particles, and a filterbag, which is very usefull in the
start-up phase. Danfoss offers two different types of filter elements, plain and pleated. The pleated filter elements have a much bigger dirt capacity due to a much larger filter
surface.
Accessories
Part
Part
Accessory for
Code number
Filter element μ150 with removable
element μ50 for the first start up
FIA 15-20
148H3301
FIA 25-40
148H3302
Part
Accessory for
Code number
Purge valve complete, blind nut and
gasket
FIA 50 - 200
2412+634
Magnet insert
Part
Filter bag
Accessory for
FIA 50
FIA 65
FIA 80
FIA 100
FIA 125
FIA 150
FIA 200
Code number
148H3150
148H3151
148H3152
148H3153
148H3154
148H3155
148H3156
d.o.o.
Code number
2464+596
2464+597
G R U P A
Accessory for
FIA 65-100
FIA 125-200
Danfoss has a complete range of filters with ANSI connection as well as a wide range of filter elements, pleated filter elements and accessories such as magnetic inserts and
filter bags for start up. For further information; please see the technical leaflet.
D = Butt-weld DIN, A = Butt-weld ANSI, ANG= Angle-way, STR = Straight-way
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Filters – FIA, FIA-SS
101
LLG - liquid level glasses
LLG are liquid level glasses made of ductile steel which meets the strictest requirements on industrial
and marine refrigeration installations
LLG has sufficient flow areas to secure the highest possible degree of synchronous operation, and have
a specially hardened reflection glass for quick reading. The LLG are delivered with stop valves, which
ensures easy insulation on site as well as easy inspection and service, if any.
Advantages and features
· All LLG liquid level glasses are equipped as standard with a
built-in safety system (non return device). If a glass is
damaged, the pressure of the refrigerant will activate the
safety system and refrigerant loss will be limited to an
absolute minimum.
· Temperature range
–10/+100°C or –50/+30°C
· The liquid level glasses are offered in 4 different versions:
- with welding nipples (LLG).
- with stop valves equipped with caps (LLG S).
- with sight adapter in acrylic glass ready for insulation on site
(LLG F).
- with stop valves and sight adapter in acrylic glass ready for
insulation on site (LLG SF).
NOTE: The LLG liquid level glass can only be placed in CE
approved applications with the stop valves in front i.e.
LLG S or LLG SF.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
102
d.o.o.
· Maximum operating pressure: 25 bar g
Equipped with boron-silicate glass, hardened by an
accurately controlled heat treatment process.
· The range of liquid level glasses is based on 3 basic liquid
level glasses: LLG 185, LLG 335 and LLG 740. The other standard
lengths are combined by using variations of basic glass lengths.
G R U P A
· Refrigerants
Applicable to all common non flammable refrigerants
including R717 and non corrosive gases/liquids dependent
on sealing material compatibility.
· Classification: To get an updated list of certification on the
products please contact your local Danfoss Sales Company.
Technical data and code numbers
Technical data
LLG
The liquid level glasses are applicable to all common non flammable refrigerants including R717 and non corrosive
gases/liquids. Flammable hydrocarbons are not recommended.
Refrigerants
Temperatur range
LLG S: –10/+100°C
LLG SF: –50/+30°C
Pressure range
Max. operating pressure
25 bar g
Pressure range Strength test
50 bar g
Pressure range Leakage test
at 25 bar g
Please see the technical leaflet for further details.
Code numbers
Liquid level glasses - LLG S With safety system and stop valves (SNV-ST)
Length
mm
in.
Type
Code no.
185
7¼
LLG 185 S
2512+056
335
13¼
LLG 335 S
2512+057
590
23¼
LLG 590 S
2512+058
740
29¼
LLG 740 S
2512+059
995
39¼
LLG 995 S
2512+060
1145
45
LLG 1145 S
2512+061
1550
61
LLG 1550 S
2512+062
Liquid level glasses for insulating - LLG SF With safety system, stop valves (SNV-ST) and sight adapter
Length
mm
in.
Type
Code no.
185
7¼
LLG 185 SF
2512+066
335
13¼
LLG 335 SF
2512+067
590
23¼
LLG 590 SF
2512+068
740
29¼
LLG 740 SF
2512+069
995
39¼
LLG 995 SF
2512+070
1145
1550
45
61
LLG 1145 SF
LLG 1550 SF
2512+071
2512+072
Important!
Where products need to be certified according to specific certification societies or where higher pressures are required, the relevant information should be included
at the time of order.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Liquid level glasses – LLG
103
GD - Gas Detectors
Danfoss Gas Detectorss, type GD are a range of products designed to meet all industrial refrigeration
and air conditioning application requirements.
GD detects a wide range of commonly used refrigerants including Ammonia, Carbon Dioxide,
Halo-Carbons and Hydro-Carbons.
Advantages and features
· GD is specifically developed for refrigeration applications
· Alarm levels can be set locally.
· Interchangeable precalibrated sensors
· GD can be connected directly to a Danfoss monitoring unit
system
· Optional models: LCD display, IP 65 enclosure, EExd
(Explosion Protected)
· Can operate as stand alone product
· Two digital outputs. Low Level and High Level Alarm
· Manual or automatic alarm reset optional
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
104
d.o.o.
· Adjustable setting for alarm levels and output contacts with
optional NO or NC switches
G R U P A
· Linear analog outputs, current (mA) / volt (V) proportional to
the gas concentration
· Available with a range of different sensor technologies to
monitor industrial refrigeration gases:
– Electro-Chemical
– Semi-Conductor
– Catalytic
– Infra-Red
Technical data and code numbers
Technical data
Refrigerants
Ammonia (R 717)
Type GDA: 0-100 ppm, 0-300 ppm, 0-1,000 ppm, 0-10,000 ppm, 0-30,000 ppm
Carbon Dioxide (R 744)
Type GDC: 0-10,000 ppm, 0-20,000 ppm, 0-30,000 ppm
Halo-Carbon - HCFC (R 22, R 123)
Type GDHC: 0-1,000 ppm
HFC (R 404A, R410A, R134A, R 407C, R 507)
Type GDHF: 0-1,000 ppm
Hydro-carbon - Propane (R 290, R 600, R 600A, R 1270)
Type GDH: 0-5,000 ppm
Versions / temperature range
Standard, LCD display, IP 65 and EExd: –20°C/+50°C
Low temperature model: –40°C/+50°C
Cable connection
1 gland for 6-13 mm cable (0.2”-0.5”) 1 Ø 20 mm (0.8”) hole with blanking plug.
1 extra gland can be fitted (only Standard, LCD display and EExd).
Approvals
CE:
EN55011: 1998,
EN61326: 1996
Following the provisions of 89/336/EEC, EMC directives and, Cenelec EN61010-2 : 2001
Following the provisions of 73/23/EEC, Low Voltage directive (LVD)
ATEX for EExd model:
Directive 94/9/EC Group 2, Category2, G and D, Zones 1 and 2.
Code numbers
All models
Danfoss Type *
Type of gas
Standard
Range
[PPM]
With LCD
display
EExd
IP 56
Low Temp.
EExd
Low. Temp.
IP 66 with
remote
IP 65
sensor
IP 66 with
remote
IP 65
EExd sensor
IP 56
Code No.
Ammonia - NH3
GDA EC 100
0-100
148H5000
148H5001
148H5003
148H5005
148H5006
148H5009
148H5016
148H5019
GDA EC 300
0-300
GDA EC 1000
0-1,000
148H5010
148H5011
148H5013
148H5015
GDA EC 1000
0-1,000
148H5050
148H5051
148H5053
148H5055
GDA SC 1000
0-1,000
148H5040
GDA SC 10000
0-10,000
148H5020
148H5021
148H5023
148H5025
GDA CT 30000
0-30,000
148H5030
148H5031
148H5033
148H5035
148H6039
GDC IR 10000
0-10,000
148H5070
148H5071
148H5073
148H5075
148H5072
GDC IR 20000
0-20,000
148H5085
148H5092
GDC IR 40000
0-40,000
HCFC
(R 22, R 123)
GDHC SC 1000
0-1,000
148H5100
148H5101
148H5105
148H5107
148H5109
HFC
(R 404A, R 410A, R 134A,
R 407C, R 507)
GDHF SC 1000
0-1,000
148H5110
148H5111
148H5115
148H5117
148H5119
HFC
(R 134a)
GDHF-R3 SC 1000
0-1,000
148H5120
148H5121
148H5125
148H5127
148H5129
GDH CT 5000
0-5,000
148H5160
148H5161
GDCM SC 500
0-5,00
148H5180
R 717
148H5063
148H5059
148H5049
148H5026
148H5027
148H5028
148H5029
Carbon Dioxide - CO2
R 744
148H5092
Halo-Carbon
Hydro-carbon
G R U P A
(R 290(Propane), R 600,
R 600A, R 1270)
148H5193
Various gases
Various gases
=
=
=
=
Electro-chemical
Semi-cheminal
Catalytic
Infrared
d.o.o.
EC
SC
CT
IR
Please consult the technical leaflet for more versions and for more information.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Gas detectors – GD
105
EKC 315A - Refrigeration control
The controller and valve can be used where there are requirements to accurate control of superheat and
temperature in connection with refrigeration. E.g.:
· Cold store (air coolers)
· Processing plant (water chillers)
· A/C plant
Functions
Advantages
· Regulation of superheat
· The evaporator is charged optimally – even when there
are great variations of load and suction pressure
· Temperature control
· MOP function
· ON/OFF input for start/stop of regulation
· Input signal that can displace the superheat reference
or the temperature reference
· Relay output for solenoid valve
· PID regulation
· Output signal following the temperature showing in
· Exact temperature control – the combination of adaptive evaporator and temperature control ensures great
temperature accuracy for the media
· The superheating is regulated to the lowest possible
value at the same time as the media temperature is
controlled by the thermostat function
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
106
d.o.o.
the display
G R U P A
· Alarm if the set alarm limits are exceeded
· Energy savings – the adaptive regulation of the refrigerant injection ensures optimum utilisation of the evaporator and hence a high suction pressure
Technical data and ordering
Technical data
Supply voltage
Power consumption
Input signal
24 V a.c. +/-15% 50/60 Hz, (80 VA)
(the supply voltage is galvanically separated from the input and output signals)
Controller
5 VA
AKV coil
55 VA
Current signal
4-20 mA or 0-20 mA
Pressure transmitter
4-20 mA from AKS 33
Digital input from external contact function
Sensor input
Output signal
2 pcs. Pt 1000 ohm
Current signal
4-20 mA or 0-20 mA
Load
Max. 200 ohm
AC-1: 4 A (ohmic)
AC-15: 3 A (inductive)
Relay output
1 pcs. SPST
Alarm relay
1 pcs. SPST
ICAD
ICAD mounted on ICM
Data communication
Current signal
4-20 mA or 0-20 mA
Possible to connect a data communication module
-10 to 55°C, during operations
-40 to +70°C, during transport
Environments
20 - 80% Rh, not condensed
No shock influence/vibrations
Enclosure
IP 20
Weight
300 g
Mounting
DIN rail
Display
LED, 3 digits
Terminals
max. 2.5 mm2 multicore
Approvals
EU Low Voltage Directive and EMC demands re CE-marking
complied with.
LVD-tested acc. to EN 60730-1 and EN 60730-2-9
EMC-tested acc. to EN50081-1 and EN 50082-2
The installation of data communications must comply with the requirements described in literature sheet no. RC8AC
Ordering
Type
Description
Code no.
EKC 315A
Superheat controller
084B7086
EKC 315A
Superheat controller, AKS 32R
084B7085
EKC 315A
I-pack of 084B7085
084B7128
EKA 173
FTT 10 LON
084B7092
EKA 174
Data communication module
(accessories), (RS 485 module)
with galvanic separation
084B7124
EKA 175
RS485 LON
084B7093
AKA 211
Cable filter *
084B2238
AKS 11
Pt 1000 Sensor
084N0003
AKS 33
Pressure transmitter -1/12 bar, 0.3%
060G2049
AKS 3000
Pressure transmitter -1/12 bar, 1%
060G1323
Accessories
G R U P A
* When cable lengths exceed 5 m, max. cable length with filter: 50 m
Additional information!
Manual: RS8CS
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Refrigeration controllers – EKC 315A
107
EKC 202 - Refrigeration controller
The series of EKC 202 controllers can be used for a wide range of different
refrigeration applications – from control of air temperatures and defrost to more
advanced applications, including control of light and fans.
Functions
Advantages
Thermostat
· ON/OFF heating or cooling thermostat
· Sensors: Danfoss Pt1000, PTC1000 or NTC5000
· Day / night control
· Thermostat band
· Alarm thermostat with delay
· Integrated refrigeration-technical functions
· Defrost on demand in 1:1 systems
· Buttons and seal imbedded in the front
· IP 65 density from the front panel
Defrost
· Electrical, natural or hot gas defrost
· Start via DI input, time interval or schedule (RTC)
· Defrost on demand
· Stop on time or temperature
· Coordinated defrost
Compressor
· Anti cycle timers for optimum protection
· High-effect 16A relays for connection of compressors without
use of intermediate relays
DI input
· Multi purpose DI input for defrost start, door function, night
setback, main switch, appliance cleaning, general alarm,
defrost coordination and thermostat band.
· Digital input for either:
- Door contact function with alarm
- Defrost start
- Start/stop of regulation
- Night operation
- Change-over between two temperature reference
- Case cleaning function
· Instant programming via programming key
· HACCP
Factory calibration that will guarantee a better measuring
accuracy than stated in the standard EN 441-13 without
subsequent calibration (Pt 1000 ohm sensor)
Fan
· Fan delay during defrost
· Fan stop when compressor cuts out
· Fan stop at high S5 temperature
Light control
· Light control of day/night, door, or via network
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
108
Technical data and ordering
Technical data
Supply voltage
230 V a.c. +10/-15 %. 1.5 VA
Sensors
Pt 1000 or
PTC (1000 ohm/25°C) or
NTC-M2020 (5000 ohm/25°C)
Measuring range
Accuracy
Controller
Pt 1000 sensor
Display
Digital inputs
Electrical connection cable
Relays*
-60 to +99°C
±1 K below -35°C
±0,5 K between -35 to +25°C
±1 K above +25°C
±0.3 K at 0°C
±0.005 K per grad
LED, 3 digits
Signal from contact functions
Requirements to contacts: Gold plating
Cable length must be max. 15 m
Use auxiliary relays when the cable is longer
Max.1,5 mm2 multi-core cable on supply and relays.
Power current terminals are mounted on the circuit board.
Max. 1 mm2 on sensors - and DI inputs.
Low current terminals are with plugs
CE
(250 V a.c.)
DO1.
10 (6) A
Refrigeration
DO2. Defrost
10 (6) A
DO3. Fan
6 (3) A
DO4. Alarm or light
4 (1) A
Min. 100 mA**
UL ***
(240 V a.c.)
10 A Resistive
5FLA, 30LRA
10 A Resistive
5FLA, 30LRA
6 A Resistive
3FLA, 18LRA
131 VA Pilot duty
4 A Resistive
131 VA Pilot duty
0 to +55°C, During operations
-40 to +70°C, During transport
Environments
20 - 80% Rh, not condensed
No shock influence/vibrations
Enclosure
IP 65 from front.
Buttons and packing are imbedded in the front.
Escapement reserve for the clock
4 hours
Approvals
EU Low Voltage Directive and EMC demands re CE-marking complied with
LVD tested acc. EN 60730-1 og EN 60730-2-9, A1, A2
EMC tested acc. EN50082-1 og EN 60730-2-9, A2
* DO1 and DO2 are 16 A relays. DO3 and DO4 are 8 A relays. Max. load must be keept.
** Gold plating ensures make function with small contact loads
*** UL-approval based on 30000 couplings
Ordering
Type
Description
Code No.
EKC 202A
Refrigeration controller
084B8521
EKC 202B
Refrigeration controller with fan function
084B8522
EKC 202C
Refrigeration controller for electric defrost
084B8523
EKA 178A
Data communication module
MOD bus
084B8564
EKA 179A
RS485 LON
084B8565
EKA 181A
Battery & Buzzer
084B8566
EKA 181C
Battery module that will protect the clock in case of
lengthy power failure
084B8577
EKA 182A
Copy key EKC - EKC
084B8567
AKS 12
Pt 1000 Sensor
084N0036
EKS 111
PTC 1000 Sensor
084N1178
EKS 211
NTC 5000 Sensor
084N1220
Accessories
G R U P A
d.o.o.
Additional information!
Manual: RS8DZ
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Refrigeration controllers – EKC 202
109
AK-CC 550 - Controller for appliance control
AK-CC 550 is a complete refrigeration appliance control with great flexibility to
adapt to all types of refrigeration appliances and cold storage rooms.
Functions
Advantages
· Day/night thermostat with ON/OFF or modulating
principle
· Energy optimisation of the whole refrigeration appliance
· Product sensor S6 with separate alarm limits
· Integrated display at the front of the controller
· Switch between thermostat settings via digital input
· Quick set-up with predefined settings
· Adaptive control of superheat
· Built-in data communication
· Adaptive defrosting based on evaporator performance
· Built-in clock function with power reserve
· One controller for several different refrigeration appliances
· Start of defrost via schedule, digital input or network
· Natural, electric or hot gas defrost
· Stop of defrost on time and/or temperature
· Coordination of defrosting among several controls
· Pulsing of fans when thermostat is satisfied
· Case cleaning function for documentation of HACCP
procedure
· Rail heat control via day/night load or dew point
· Door function
· Control of two compressors
· Control of night blinds
· Heat thermostat
· Factory calibration that will ensure a better measuring
accuracy than stated in the standard EN 441-13 without
subsequent calibration (Pt 1000 ohm sensor)
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
110
d.o.o.
· Integrated MODBUS communication with the option of
mounting a LonWorks or Ethernet communication card
G R U P A
· Light control
Technical data and ordering
Technical data
Supply voltage
Sensor S111,
(S1)
Sensor S3, S4, S5, S6
Accuracy
230 V a.c. +10/-15%, 5 VA
Pt 1000
Pt 1000
PTC 1000 ohm/1115°C
(All 4 must be of the same type)
Measuring range
-60 to +120°C
±1 K below -35°C
±0.5 K between -35 to +1115°C
±1 K above +1115°C
Controller
±0.3 K at 0°C
±0.005 K per grad
AKS 3111R
Pt 1000 sensor
Measuring of Pe
Display
External display
Pressure transmitter
LED, 3-digits
EKA 163B or 164B. (any EKA 163A or 164A)
Digital inputs
DI1, DI111
Signal from contact functions
Requirements to contacts: Gold plating
Cable length must be max. 15 m
Use auxiliary relays when the cable is longer
Digital input DI3
Electrical connection cable
11130 V a.c.
Max. 1.5 mm111 multi-core cable
Solid state output
DO1 (for AKV coil)
Relays*
DO3, DO4
DO2, DO5, DO6
0 to +55°C, During operations
-40 to +70°C, During transport
20 - 80% Rh, not condensed
No shock influence/vibrations
IP 20
DIN rail or on wall
0.4 kg
Fixed
Environments
Density
Mounting
Weight
Data communication
Power reserve for the clock
Approvals
Max. 11140 V a.c. , Min. 1118 V a.c.
Max. 0,5 A
Leak < 1 mA
Max. 1 pcs. AKV
CE (250 V a.c.)
4 (3) A
4 (3) A
MODBUS
LON RS485
Extension options
TCP/IP
MODBUS
The controller cannot be hooked up with a monitoring unit type m2.
4 hours
EU Low Voltage Directive and EMC demands re CE-marking complied with.
LVD-tested acc. to EN 60730-1 and EN 60730-2-9
EMC-tested acc. to EN 50081-1 and EN 50082-2
*) DO3 and DO4 are 16 A relays. DO111, DO5 and DO6 are 8 A relays. Max. load must be observed.
Ordering
Type
AK-CC 550
EKA 175
EKA 177
EKA 164B
EKA 163A
EKA 164A
084B8020
084B8021
084B8579
084B8581
084B8571
084B8574
084B8575
084B8562
084B8563
084B7069
Additional information!
Manual: RS8EN
d.o.o.
EKA 17111
Code no.
G R U P A
EKA 178B
EKA 163B
Description
Case controller with MODBU data communication
Sensor connections are with screw terminals
Case controller with MODBU data communication
Sensor connections are with plug connections
Data communication module
LON RS 485
Data communication module
Ethernet
Data communication module MODBUS
External display with plug fo direct connection
External display operation buttons and plug
for direct connection
External display with screw terminals
External display with operation buttons and screw
terminals
RTC-module
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Controller for appliance control – AK-CC 550
111
EKC 102 - Temperature controller
EKC 102 controllers for panel mounting are used for temperature and defrost
control via pump-down or start/stop of compressor.
Functions
Advantages
Thermostat
· ON/OFF thermostat
· Sensors: Danfoss Pt1000, PTC1000 or NTC5000
· Calibration of sensors
· Day/night control
· Alarm thermostat with delays
· Integrated refrigeration-technical functions
Defrost
· Electrical or natural defrost
· Start via DI input, time interval or display
· Defrost on demand
· Stop on time or temperature
Compressor
· Anti cycle timers for optimum compressor protection
· High-effect 16A relays for connection of compressors
without use of intermediate relay
· Control of 2 compressors (version 102B)
Multipurpose DI input
· Multipurpose DI input for defrost start, day/night control,
dooralarm or main switch
Other functions
· The S5 sensor can be used for monitoring of condenser
temperature or as product sensor (version 102B+102D)
· Door function with alarm monitoring
· Manual control of outputs
· Delay of outputs at power up
· Defrost on demand in 1:1 systems
· Buttons and seal imbedded in the front
· IP 65 density from the front panel
· Can control two compressors
· Digital input for either:
- Door alarm
- Defrost start
- Start/stop of regulation
- Night operation
- Change-over between two temperature reference
- Case cleaning function
· Instant programming via programming key
· HACCP
Factory calibration that will guarantee a better measuring
accuracy than stated in the standard EN 441-13 without
subsequent calibration (Pt 1000 ohm sensor)
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
112
d.o.o.
Fan (102D only)
· Fan delay during defrost
· Fan stop when compressor cuts out
· Fan stop at high S5 temperature
G R U P A
Display & Programming
· High-efficient LED display with icons for indication of
operational status. Parameter settings/readouts and alarm
conditions can be read on the display.
· ”Copy key” programming key with room for 25 different
controller setups
Technical data and ordering
Technical data
Supply voltage
230 V a.c.(115 V) +10/-15 %. 1.5 VA
Sensors
Pt 1000 or
PTC (1000 ohm/25°C) or
NTC-M2020 (5000 ohm/25°C)
Measuring range
Accuracy
Controller
Pt 1000 sensor
Display
Digital inputs
Electrical connection cable
Relays*
-60 to +99°C
±1 K below -35°C
±0.5 K between -35 to +25°C
±1 K above +25°C
±0.3 K at 0°C
±0.005 K per grad
LED, 3 digits
Signal from contact functions
Requirements to contacts: Gold plating
Cable length must be max. 15 m
Use auxiliary relays when the cable is longer
Max.1.5 mm2 multi-core cable on supply and relays.
Max. 1 mm2 on sensors - and DI inputs.
Terminals are mounted on the circuit board
CE
(250 V a.c.)
DO1.
10 (6) A
Refrigeration
DO2. Alarm/
Defrost/
10 (6) A
Refrigeration
DO3. Fan
UL **
(240 V a.c.)
10 A Resistive
5FLA, 30LRA
10 A Resistive
5FLA, 30LRA
6 A Resistive
3FLA, 18LRA
131 VA Pilot duty
6 (3) A
0 to +55°C, During operations
-40 to +70°C, During transport
Environments
20 - 80% Rh, not condensed
No shock influence/vibrations
Enclosure
Approvals
IP 65 from front.
Buttons and packing are imbedded in the front.
EU Low Voltage Directive and EMC demands re CE-marking complied with
LVD tested acc. EN 60730-1 og EN 60730-2-9, A1, A2
EMC tested acc. EN50082-1 og EN 60730-2-9, A2
* DO1 and DO2 are 16 A relays. DO3 is a 8 A relay. Max. load must be keept.
** UL-approval based on 30000 couplings
Ordering
Type
Description
Supply
Code No.
230 V a.c.
084B8500
EKC 102A
Temperature controller
115 V a.c.
084B8503
EKC 102B
Temperature controller with alarm 230 V a.c.
function
115 V a.c.
084B8501
EKC 102C
EKC 102D
084B8504
Temperature controller for electric
defrost
230 V a.c.
084B8502
115 V a.c.
084B8505
Controller for refrigeration with fan
function
230 V a.c.
084B8506
115 V a.c.
084B8507
Accessories
084B8565
084B8566
EKA 182A
Copy key EKC - EKC
084B8567
AKS 12
Pt 1000 Sensor
084N0036
EKS 111
PTC 1000 Sensor
084N1178
EKS 211
NTC 5000 Sensor
084N1220
Additional information!
Manual: RS8DY
d.o.o.
RS485 LON
Battery & Buzzer
G R U P A
EKA 179A
EKA 181A
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Temperature controller – EKC 102
113
AK-CC 210 - Universal refrigeration controller
The controller is used for evaporator control refrigeration appliances in supermarkets.
With many predefined applications one unit will offer you many options. Flexibility has been planned
both for new installations and for service in the refrigeration trade.
Functions
Advantages
Thermostat
· ON/OFF heating or cooling thermostat
· Sensors: Danfoss Pt1000, PTC1000 or NTC5000
· Day / night control
· Thermostat band
· Alarm thermostat with delay
· Many applications in the same unit
· The controller has integrated refrigeration-technical functions,
so that it can replace a whole collection of thermostats and
timers
· Buttons and seal imbedded in the front
Defrost
· Electrical, natural or hot gas defrost
· Start via DI input, time interval or schedule (RTC)
· Defrost on demand
· Stop on time or temperature
· Coordinated defrost
Compressor
· Anti cycle timers for optimum protection
· High-effect 16A relays for connection of compressors
without use of intermediate relays
· Can control two compressors
· Easy to remount data communication
· Quick setup
· Two temperature references
· Digital inputs for various functions
· Clock function with backup
DI input
· Multi purpose DI input for defrost start, door function, night
setback, main switch, appliance cleaning, general alarm,
defrost coordination and thermostat band.
Fan
· Fan delay during defrost
· Fan stop when compressor cuts out
· Fan stop at high S5 temperature
· HACCP (Hazard Analysis and Critical Control Points)
- Temperature monitoring and registration of period with too
high temperature
- Factory calibration that will guarantee a better measuring
accuracy than stated in the standard EN 441-13 without subsequent calibration (Pt 1000 ohm sensor)
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
114
d.o.o.
Supplementary options
· RS 485 network card for connection to network
· Battery back-up card for real time clock
· ”Copy key” programming key
G R U P A
Light control
· Light control of day/night, door, or via network
Other functions
· S5 sensor can be used for monitoring of condenser
temperature or as product sensor
· Door function with alarm monitoring
· Manual control of outputs
· Case cleaning function
Technical data and ordering
Technical data
Supply voltage
230 V a.c. +10/-15 %. 2.5 VA
Sensors 3 pcs off either
Pt 1000 or
PTC (1000 ohm / 25°C) or
NTC-M2020 (5000 ohm / 25°C)
Measuring range
Accuracy
Controller
Pt 1000 sensor
-60 to +99°C
±1 K below -35°C
±0.5 K between -35 to +25°C
±1 K above +25°C
±0.3 K at 0°C
±0.005 K per grad
Display
LED, 3-digits
External display
EKA 163A
Digital inputs
Signal from contact functions
Requirements to contacts: Gold plating
Cable length must be max. 15 m
Use auxiliary relays when the cable is longer
Electrical connection cable
Max.1,5 mm2 multi-core cable
CE
(250 V a.c.)
Relays*
DO1.
Refrigeration
10 (6) A
DO2. Defrost
10 (6) A
DO3. Fan
6 (3) A
DO4. Alarm
4 (1) A
Min. 100 mA**
UL ***
(240 V a.c.)
10 A Resistive
5FLA, 30LRA
10 A Resistive
5FLA, 30LRA
6 A Resistive
3FLA, 18LRA
131 VA Pilot duty
4 A Resistive
131 VA Pilot duty
0 to +55°C, During operations
-40 to +70°C, During transport
Environments
20 - 80% Rh, not condensed
No shock influence / vibrations
Density
IP 65 from front.
Buttons and packing are embedded in the front.
Escapement reserve for the clock
4 hours
Approvals
EU Low Voltage Directive and EMC demands re CE-marking complied with
LVD tested acc. EN 60730-1 og EN 60730-2-9, A1, A2
EMC tested acc. EN50082-1 og EN 60730-2-9, A2
* DO1 and DO2 are 16 A relays. DO3 and DO4 are 8 A relays. Max. load must be keept.
** Gold plating ensures make function wiht small contact loads
*** UL-approval based on 30000 couplings
Ordering
Type
Description
Code No.
AK-CC 210
Refrigeration controller without data communication
but prepared for LON RS 485 module
084B8520
EKA 163A
External display for AK-CC 210
084B8562
EKA 178A
Data communication module MOD bus
084B8564
EKA 179A
RS485 LON
084B8565
EKA 181A
Battery & Buzzer
084B8566
EKA 181C
Battery module that will protect the clock in case of
lengthy power failure
084B8577
EKA 182A
Copy key EKC - EKC
084B8567
AKS 12
Pt 1000 Sensor
084N0036
EKS 111
PTC 1000 Sensor
084N1178
EKS 211
NTC 5000 Sensor
084N1220
Accessories
G R U P A
d.o.o.
Additional information!
Manual: RS8DZ
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Universal refrigeration controller – AK-CC 210
115
AK-SM 350 - System Manager
The unit is a combined data collection unit and monitoring unit for smaller refrigeration installations.
· Corner shops
· Smaller supermarkets
· Restaurants
· Food manufacturers
Functions
Advantages
The monitoring unit can monitor up to 65 measurements.
Compact unit for registering temperatures
They can originate from:
· Collects temperature data to present to authorities
- up to 16 direct connections from sensors or switch functions
· Alarm function
- signals from separate refrigeration controllers, EKC and
AK types, via data communication
- Alarm at deviations in temperature
- All defined points can be recorded and saved with the set
time intervals.
- The values can be viewed on the display and retrieved by
connecting a printer or connecting a PC or modem.
d.o.o.
- Alarms when doors to cold storage rooms and freezer
rooms are open
G R U P A
- signals from connections on the expansion module m2+
and from gas detectors. These readings are also transferred
via data communication.
- Local alarm or via modem/IP
- Pulse counting function for energy display
· Text describing the measuring area can be added to the
measuring points
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
116
Technical data and ordering
Technical data
Supply
Display
115 V/230 V
+10/-15%, 50/60 Hz, 10 VA
PT 1000 ohm at 0°C or
PTC 1000 ohm at 25°C or
NTC 5000 ohm at 25°C or
Termistor (-80 to 0, -40 to 40 or 0 to 100°C)
Digital On/Off signal or
Standard 0 - 10 V /4 - 20 mA signal
Graphic LCD, 240 x 64
Direct measuring points
16
Total number of points
65
Measuring range, general
-60 to +50°C
Measuring accuracy at Pt 1000
Measuring interval
Resolution 0.1 K
Accuracy: +/- 0.5 K
15, 30, 60, 120 or 240 minutes
Data capacity
55 log points, every 15 min. for 1 year
Battery backup
Button cell for clock function
Power supply for e.g. pressure
transmitter
Pulse counter inputs for output
reading
Printer connection
5 V max. 50 mA
12 V max. 50 mA
Acc. to DIN 43864.
(Only for inputs 1 and 2)
HP PCL-3, Parallel
Modem connection
RJ 45
TCP/IP connection
RJ 45
PC connection
RJ 45
Connection
Data communication
Relays
RS232, RS 485 (LON), RS 485 (MOD-bus), RS 485 (TP) (TP= Third Party)
Quantity
2
Max. load
24 V a.c. or 230 V a.c.
Imax (AC-1) = 5 A
Imax (AC-15) = 3 A
IP 20
Enclosure
Ambient environmen
0 to 50°C, during operation
-20 to +70°C, during transport
20-80% RH, Non-condensed
No shock loads/vibrations
Approvals
EN 60730-1 and EN 60730-2-9
EN 50081-1 and EN 50082-1
1.6 Kg
Weight
Additional information!
Manual: RS8EF
Ordering
Type
Measuring points
AK-SM 350
m2+
16
Description
With inputs for PT 1000
ohm & PTC 1000 ohm
Language
Code No.
English, German, French,
dutch, Italian
English (UK), Spanish,
Portuguese,
English (US)
English,
Danish,
Swedish, Finnish
16
080Z8500
080Z8502
080Z8503
080Z8005
Accessories
Cable for PC
(see also AK-ST 500 literature)
080Z8401
RJ 45 - Com port
080Z0262
Important: Installation of data communication cables and repeaters must comply with the requirements contained in the document:
Data communication between ADAP-KOOL® Refrigeration system controls.
Number = RC8AC.
G R U P A
Printer cable 3 m (parallel)
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
System manager – AK-SM 350
117
EKC 361 - Media temperature control
The controller and valve can be used where there are stringent requirements to accurate temperature
control in connection with refrigeration. E.g.:
· Cold room for fruits and food products
· Refrigerating systems
· Work premises in the food industry
· Process cooling of liquids
Functions
· Modulating temperature control
· Digital ON/OFF input for start/stop of regulation ICS/PM
or forced closing of ICM
· Alarm if the set alarm limits are exceeded
· Relay output for fan
· Relay output for solenoid valves
· Analog Output signal corresponding to selecting
temperature as running display value.
Please observe : Not possible if ICM is selected as valve
· The temperature is kept within an accuracy of ±0.25°C or
better in normal operation
· The evaporator's temperature is kept as high as possible,
so that the air humidity is kept high to avoid waste
· A transient phenomenon can be controlled with the adaptive function. Select either:
- Fast build-up where underswings are allowed
- Not quite so fast build-up where underswings are less
pronounced
- Build-up without underswings
· PID regulation
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
118
d.o.o.
· p0 limitation
G R U P A
· Analog input signal that can displace the temperature
reference
Advantages
Technical data and ordering
Technical data
Supply voltage
Power consumption
Input signal
24 V a.c. +/-15% 50/60 Hz, 80 VA
(the supply voltage is galvanically separated from the input and output signals)
Controller
5 VA
Actuator
75 VA
Current signal
4-20 mA or 0-20 mA
Digital input from external contact function
Sensor input
2 pcs. Pt 1000 ohm
Output signal
Current signal
Relay output
2 pcs. SPST
Alarm relay
1 pcs. SPST
a.c.-1: 4 A (ohmic)
a.c.-15: 3 A (inductive)
Input
Temperature signal from sensor in the actuator
Output
Pulsating 24 V a.c. to actuator
Actuator
4-20 mA or 0-20 mA
Max. load: 200 ohm
Data communication
Possible to connect a data communication module
Ambient
temperature
During operation
During transport
Enclosure
IP 20
Weight
300 g
Mounting
DIN rail
Display
LED, 3 digits
Terminals
max. 2.5 mm2 multicore
Approvals
EU Low Voltage Directive and EMC demands re CE-marking complied with.
LVD-tested acc. to EN 60730-1 and EN 60730-2-9
EMC-tested acc. to EN50081-1 and EN 50082-2
-10 - 55°C
-40 - 70°C
Ordering
Type
Description
Code No.
EKC 361
Evaporating pressure controller
084B7060
EKA 173
FTT 10 LON
084B7092
EKA 174
Data communication module (accessories), (RS 485
module) with galvanic separation
084B7124
EKA 175
RS485 LON
084B7093
AKS 21M
Pt 1000 Sensor
084N2003
AKA 211
Cable filter *
084B2238
Accessories
* When cable lengths between controller and valve exceed 5 m, max. cable length with filter: 50 m
The installation of data communications must comply with the requirements described in literature sheet no. RC8AC
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Media temperature control – EKC 361
119
EKC 366 - Controller Interface
The controller is used for regulating a valve in a refrigerating system - for example in connection with:
· Long-term storage of fruits and vegetables
· Refrigerating plant
· Brewery systems
· Processing plant
Functions
· The valve constantly receives feedback of the pressure in
the evaporator. Whatever the variations in the suction pressure from the compressor, this feedback will produce the
result that the evaporating pressure is kept constant.
· In conjunction with the controller, an electronic constant
pressure valve is thus obtained.
functions:
· Maintenance of a constant evaporating pressure
A temperature sensor in the valve’s actuator will regulate its
temperature. This temperature is an indication of the pressure in the valve, and the interface module will keep this
temperature constant.
· The media temperature is regulated by a PLC or similar
device.
Here the interface module receives a variable signal from
the PLC and will subsequently regulate the valve, so that the
refrigeration will be as accurate as possible.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
120
d.o.o.
· In an application where a PLC or similar device is used for
regulating a media temperature, the regulating system
will in this way be supplied with an outer regulating loop
– which will result in great regulating accuracy.
The controller has been specially designed for the following
G R U P A
· Inserted between the controller and the actuator is a socalled inner regulating loop. This loop will – via an NTC
resistance – constantly control the temperature in the
actuator.
Advantages
Technical data and ordering
Technical data
Supply voltage
Power consumption
Input signal
Actuator
24 V a.c. +/-15% 50/60 Hz, 80 VA
(the supply voltage is galvanically separated from the input and output signals)
Controller
5 VA
Valve
75 VA
4-20 mA, 0-20 mA, 0-10V d.c. or
2-10 V d.c.
Input
Temperature signal from sensor in actuator
Output
Pulsating 24 V a.c. to actuator
Data communication
Possible to connect a data communication module
Ambient temperature
During operation
During transport
Enclosure
IP 20
Weight
300 g
Mounting
DIN rail
Display
LED, 3 digits
Terminals
max. 2.5 mm2 multicore
Approvals
EU Low Voltage Directive and EMC demands re CE-marking complied with.
LVD-tested acc. to EN 60730-1 and EN 60730-2-9
EMC-tested acc. to EN 50081-1 and EN 50082-2
-10 - 55°C
-40 - 70°C
Ordering
Type
Function
Code No.
EKC 366
Interface module
084B7076
Accessories
EKA 173
EKA 174
Data communication module (accessories),
(FTT 10 module)
Data communication module (accessories),
(RS 485 module) with galvanic separation
084B7092
084B7124
Valves: Kindly refer to catalogue RK0YG
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Controller interface – EKC 366
121
XGE/RGE: Condenser fan speed controls
Fan speed control is becoming increasingly widespread in different refrigeration and air conditioning
units, with the benefits of reduced noise and stable condensing pressures under different climatic conditions. The XGE range is very compact and offers the ideal solution for reliable fan control for most units
where small fans are used. For medium to large sized fans (single and three phase) the RGE range offers a
simple and efficient fan speed control solution.
Features
Easily accessible
adjusting screw
Quick electrical connection
in 4 different directions
Waterproof housing
with IP 65
1/4 in female or male
connection (or ¼ in
female with capillary
tube for RGE)
Applications
· Freezing and refrigeration condensing
units
· Packaged air conditioners and
chillers
Installation flexibility: direct or
panel mounting
Advantages
· Simple to install and easy setting
· “All in one”: senses pressure and controls fan speed
Facts
· Electrical rating from 3 to 8A (single
phase) and 5 to 7A (3 phase)
· Reliable sensing mechanism
· For all the commonly used refrigerants, including R410A
· XGE:
· Enclosure: IP 65 (XGE) and IP54 (RGE)
- Compact & light weight (length:
112mm - diameter: 66mm - weight:
180g)
· Full CE / EMC approved
- Can be directly mounted onto the
refrigeration line or fixed onto a simple bracket (accessory) and screwed
to a panel
· With low speed operation it is possible to select either minimum speed
operation or cut-off operation
· Dual frequency: 50/60 Hz
· Max. working pressure: 47 bar
- Easily accessible adjusting screw on
the top surface
- Specially designed heat dissipation
radiator to prevent overheating
G R U P A
- Easy wiring and electrical connection
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
122
Technical data and ordering
Mode 1)
Pressure
connection
Adjusting
range
[bar]
P-band
[bar]
Pre-setting
[bar]
Rated
motor
rating [A]
No. of phase/
voltage [VAC]
Code no.
XGE-4C
C
1/4 in female flare
10-25
6
19
0.2-3
1 / 200-240
061H3140
XGE-4CB
C
1/4 in male flare
10-25
6
19
0.2-3
1 / 200-240
061H3142
XGE-6C
C
1/4 in female flare
22-39
7
28
0.2-3
1 / 200-240
061H3160
XGE-6CB
C
1/4 in male flare
22-39
7
28
0.2-3
1 / 200-240
061H3162
XGE-4M
M
1/4 in female flare
10-25
6
19
0.2-3
1 / 200-240
061H3240
XGE-4MB
M
1/4 in male flare
10-25
6
19
0.2-3
1 / 200-240
061H3242
XGE-6M
M
1/4 in female flare
22-39
7
28
0.2-3
1 / 200-240
061H3260
XGE-6MB
M
1/4 in male flare
22-39
7
28
0.2-3
1 / 200-240
061H3262
RGE-Z1N4-7DS
C or M
1/4 in female flare
8-28
4
19
0.2-4
1 / 200-240
061H3005
RGE-Z1N6-7DS
C or M
1/4 in female flare
16-39
8
32
0.2-4
1 / 200-240
061H3021
RGE-Z1P4-7DS
C or M
1/4 in female flare
8-28
4
19
0.2-6
1 / 200-240
061H3008
RGE-Z1P6-7DS
C or M
1/4 in female flare
16-39
8
32
0.2-6
1 / 200-240
061H3022
RGE-Z1Q4-7DS
C or M
1/4 in female flare
8-28
4
19
0.2-8
1 / 200-240
061H3009
RGE-Z1Q6-7DS
C or M
1/4 in female flare
16-39
8
32
0.2-8
1 / 200-240
061H3023
RGE-Z3R4-7DS
C or M
1/4 in female flare
8-28
4
16
0.2-5
3 / 200-240
061H3003
RGE-X3R4-7DS
C or M
1/4 in female flare
8-28
4
16
0.2-5
3 / 380-415
061H3006
RGE-Z3R6-7DS
C or M
1/4 in female flare
16-39
8
32
0.2-5
3 / 200-240
061H3027
RGE-X3R6-7DS
C or M
1/4 in female flare
16-39
8
32
0.2-5
3 / 380-415
061H3028
RGE-Z3T4-7DS
C or M
1/4 in female flare
8-28
4
16
0.2-7
3 / 200-240
061H3050
RGE-Z3T6-7DS
C or M
1/4 in female flare
16-39
8
32
0.2-7
3 / 200-240
061H3051
Model
1)
C = Cut-off, M = Min. speed
Accessories
Model
XGE-AE01
Description
Dimensions
Code no.
Fixing bracket accessory for panel mount
H: 38mm, W: 42mm, D: 45mm
061H3102
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Condenser fan speed controls – XGE/RGE
123
EKC 331T - Capacity control
The controller is used for capacity regulation of compressors or condensers in small
refrigerating systems.
Regulation can be carried out with up to four identical capacity steps.
Functions
Advantages
· Regulation
Regulation with up to four relay outputs can be carried out.
Regulation takes place with a set reference which is compared
to a signal from a pressure transmitter or a temperature
sensor.
· Relay module
It is possible to use the controller as relay module, so that the
relays are cut in or out by means of an external voltage signal.
· Alarmfunction
A relay becomes activated when the set alarm limits are
exceeded.
· Digital input
The digital input can be used for:
- night operation where the suction pressure is raised
- heat recovery where the condensing pressure is raised
- external start/stop of the regulation.
- Monitoring of safety circuit
· Possibility of data communication
· Patented neutral zone regulation
· Sequential or cyclic operation
d.o.o.
124
G R U P A
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Technical data and ordering
Technical data
Supply voltage
Input signal
230 V a.c. +/-15% 50/60 Hz, 5 VA
Pressure transmitter*) with 4-20 mA or
temperature sensor Pt 1000 ohm or
temperature sensor PTC 1000 ohm or
voltage signal (0 - 5 V, 0 - 10 V or 5 - 10 V)
Digital input to external contact function
Relay output
4 pcs. SPST
Alarmrelay
1 pcs. SPST
Data communication
Possible to connect a data communication module
AC-1: 4 A (ohmic)
AC-15: 3 A (inductive)
AC-1: 4 A (ohmic)
AC-15: 1 A (inductive)
-10 - 55°C, during operation
-40 - 70°C, during transport
Environments
20 - 80% Rh, not condensed
No shock influence/vibrations
Enclosure
IP 20
Weight
300 g
Mounting
DIN rail
Display
LED, 3 digits
Terminals
max. 2.5 mm2 multicore
Approvals
EU Low voltage Directive and EMC demands re CE-marking complied with.
LVD-tested acc. to EN 60730-1 and EN 60730-2-9
EMC-tested acc. to EN50081-1 and EN 50082-2
*) As pressure transmitter can be used AKS 32R or AKS 33.
The installation of data communications must comply with the requirements described in literature sheet no. RC8AC
Ordering
Type
Function
Ordering
EKC 331T
Capacity controller
084B7105
EKA 175
Data communication module
(accessories), (RS 485 module)
084B7093
Additional information!
Manual: RS8CU
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Capacity control – EKC 331T
125
AK-PC 530 - Capacity controller
The controller is used for capacity regulation of compressors or condensers in small refrigerating
systems.
Numbers of compressors and condensers can be connected, as required.
There are eight outputs and more can be added via an external relay module.
Functions
Advantages
· Relays for compressor and condenser regulation
·
·
·
·
· Voltage output for capacity regulation of condenser
· Status inputs. An interrupted signal indicates that the
safety circuit has been activated and the respective circuit
stopped
Patented neutral zone regulation
Many possible combinations for compressor constellations
Sequential or cyclic operation
Possibility of suction pressure optimization via the data
communication
· Contact inputs for displacement of references or for indication of alarms
· Alarm relay
· Possibility of data communication
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
126
d.o.o.
· External start/stop of regulation
G R U P A
· Contact inputs for indication of alarms
Technical data and ordering
Technical data
Supply voltage
24 V a.c. +/-15% 50/60 Hz, 5 VA
2 pcs. Pressure transmitters type AKS 32R (temperature sensor in brine systems)
Input signal
3 pcs. temperature sensor input for PT 1000 ohm/0°C or PTC 1000 ohm/25°C
1 pcs. for Start/stop of regulation
Digitale input from contact function.
8 pcs. for monitoring of safety circuits
3 pcs. for alarm function
2 pcs. for alarm function or for displacement of references
Relay output for capacity regulation
8 pcs. SPST
"AKD start/stop" relay
1 pcs. SPST
Alarm relay
1 pcs. SPDT
Voltage output
0-10 V d.c.
Display outputs
Data communication
AC-1: 3 A (ohmic)
AC-15: 2 A (inductive)
AC-1: 6 A (ohmic)
AC-15: 3 (inductive)
EKA 163
Pc display
EKA 165(164)
Operation, P0 display and LED
Possible to connect a data communication module
0 - 55°C, during operation
-40 - 70°C, during transport
Environments
20 - 80% Rh, not condensing
No shock influence / vibrations
Enclosure
IP 20
Weight
0.4 kg
Mounting
DIN rail or on wall
Terminals
max. 2.5 mm2 multicore
Approvals
EU Low voltage Directive and EMC demands re CE-marking complied with.
LVD-tested acc. to EN 60730-1 and EN 60730-2-9
EMC-tested acc. to EN61000-6-2 and 3
Ordering
Type
Function
Code no.
AK-PC 530
Capacity controller
084B8007
EKA 163B
Display unit
084B8574
EKA 164B
Display unit with operation buttons
084B8575
EKA 165
Display unit with operation buttons and light-emitting
diodes for input and output
084B8573
EKA 173
Data communication module, FTT 10
084B7092
EKA 175
Data communication module, RS 485
084B7093
Cable for display unit 2 m, 1 pcs.
084B7298
Cable for display unit 6 m, 1 pcs.
084B7299
Accessories
Cables
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Capacity controller – AK-PC 530
127
Sensors and transmitters
Danfoss can supply a wide range of sensors and transmitters for electronic control of refrigeration
applications.
Temperature sensors
Pressure transmitters
· Temperature sensors are temperature dependent resistance sensors.
· AKS pressure transmitters are designed for precise and
energy optimized control.
· Sensors in the AKS series are mainly for use in commercial and industrial refrigeration plants where the requirements on grade of enclosure and temperature range are
high.
· The robust design makes AKS suitable for a wide range
of applications, such as:
· Sensors in the EKS series are mainly for use in air conditioning and comfort applications where there is a focus
on the design of the unit and where the requirements to
the temperature regulation are less demanding.
- Laboratory applications
· Product range:
- 4 - 20 mA (AKS 33, AKS 3000)
- 1 - 5 V d.c.,
- 1 - 6 V d.c.,
- 0 - 10 V d.c. (AKS 32)10
- 90% ratiometric output (AKS 32R)
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
128
d.o.o.
· The EKS sensors consist of a PTC element (1000 ohm at
25°C).
- Process control applications
G R U P A
· The sensors are adjusted and meet the tolerance requirements of DIN IEC 751 class B.
- Air conditioning systems-Refrigeration plants
Technical data and code numbers
Temperature sensors
Type
Code number
Signal
Measure range
Sensor tube
Electrical
connection
Cable length
EKS 111
084N1178
PTC1000
–55 → 100°C
Round
Cable with pins
1.5 m
EKS 111
084N1179
PTC1000
–55 → 100°C
Round
Cable with pins
3.5 m
EKS 111
084N1182
PTC1000
–55 → 100°C
Round
AMP Plug
3.5 m
EKS 211
084B4404
NTC5000
–40 → 80°C
Round
Cable
3.5 m
EKS 211
084N1220
NTC5000
–40 → 80°C
Round
Cable
1.5 m
1.5 m
AKS12
084N0036
PT1000
–40 → 80°C
Round
Cable
AKS12
084N0045
PT1000
–40 → 80°C
Round
AMP Plug
5.5 m
AKS 11
084N0003
PT1000
–50 → 100°C
Concave
Cable
3.5 m
AKS 11
084N0005
PT1000
–50 → 100°C
Concave
Cable
5.5 m
AKS 11
084N0008
PT1000
–50 → 100°C
Concave
Cable
8.5 m
EKS 111, 211
AKS 12, 21M
AKS 11
AKS 21 M
084N2003
PT1000
–70 → 180°C
Round
Cable
2.5 m
AKS 21 W
084N2017
PT1000
–70 → 180°C
Sensor pipe
Cable
2.5 m
AKS 21 D
084N2035
PT1000
–40 → 80°C
Channel bulb
Terminal socket/
Type B
–
Accessories
060G1034
Plug 3 + E (female)
+ 5 m cable
–
Connection
AKS 21W
AKS 21D
Pressure transmitters
Type
Code number
Signal
Measure range
Max. working
pressure
Electrical
connection
DIN 43650-A
Connection
without plug
7/16-20 UNF flare
DIN 43650-A
Connection
without plug
7/16-20 UNF flare
AKS 32, 10-90% rated output signal, 4.75-8 V d.c., 0.3% FS
AKS 32
060G2069
0.5 → 4.5 V
–1/12 bar
33 bar
AKS 32
060G2071
0.5 → 4.5 V
–1/34 bar
55 bar
AKS 32R, 10-90% rated output signal, 4.75-8 V d.c., 0.3% FS
AKS 32R
060G0090
0.5 → 4.5 V
–1/12 bar
33 bar
AKS 32R
060G1036
0.5 → 4.5 V
–1/34 bar
55 bar
AKS 32
AKS 32R
AKS 33, 4-20 mA output signal, 10-30V d.c. supply voltage, 0.3% FS
AKS 33
060G2048
4 → 20 mA
–1/6 bar
33 bar
AKS 33
060G2049
4 → 20 mA
–1/12 bar
33 bar
AKS 33
060G2045
4 → 20 mA
–1/25 bar
33 bar
AKS 33
060G2051
4 → 20 mA
–1/34 bar
33 bar
AKS 33
060G2104
4 → 20 mA
–1/6 bar
33 bar
AKS 33
060G2105
4 → 20 mA
–1/12 bar
33 bar
AKS 33
060G2107
4 → 20 mA
–1/34 bar
33 bar
7/16-20 UNF flare
DIN 43650-A
Plug Pg 9
G3/8 EN 837
AKS 33
AKS 3000, 4-20 mA output signal, 10-30V d.c. supply voltage, 1.0% FS
AKS 3000
060G1323
4 → 20 mA
–1/12 bar
33 bar
AKS 3000
060G1327
4 → 20 mA
0/30 bar
55 bar
AKS 3000
060G1896
4 → 20 mA
–1/12 bar
33 bar
DIN 43650-A
Plug Pg 9
7/16-20 UNF flare
DIN 43650-A
Plug Pg 9
G3/8 EN 837
G3/8 EN 837
AKS 3000
060G1041
4 → 20 mA
0/25 bar
40 bar
AKS 3000
060G1066
4 → 20 mA
0/40 bar
100 bar
DIN 43650-A
Plug Pg 9
Code number
Signal
Length
Max. working
pressure
Electrical
connection
60 bar
60/100°C
DIN 43650-A
Plug Pg 9
AKS 3000
Level controls
Type
084H4053
4 → 20 mA
280 mm
084H4055
4 → 20 mA
500 mm
AKS 41-8
084H4058
4 → 20 mA
800 mm
AKS 41-10
084H4060
4 → 20 mA
1000 mm
AKS 41-12
084H4062
4 → 20 mA
1200 mm
084H40654
4 → 20 mA
1500 mm
084H40674
4 → 20 mA
1700 mm
AKS 41-22
084H40724
4 → 20 mA
2200 mm
G 1A - ISO 228/1
AKS 41
d.o.o.
AKS 41-15
AKS 41-17
G R U P A
AKS 41-3
AKS 41-5
Pipe connection
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Sensors and transmitters
129
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
130
Compressors
Danfoss Compressors
– universal, innovative and energy-saving
At Danfoss Compressors, we have always been committed to
satisfying the precise needs and expectations of our customers,
over both the long and short term. More than 50 years’ experience
of compressor technology have taught us the requirements of our
customers – and their customers – and has led to the creation of
the world’s most complete product range.
As a global leader in the field of refrigeration and air conditioning,
we continuously strive to provide our customers with innovative
solutions that are energy-efficient and environmentally-responsible.
Extensive product and application range
The Danfoss compressor range goes from small, direct current
hermetic compressors for mobile applications, up to large scroll
compressors for commercial air conditioning or industrial applications. Special versions, such as energy optimised compressors,
variable speed compressors and compressors for solar applications
are also available. The range covers all common HFC and HCFC
refrigerants, as well as hydro-carbons for the smaller models.
Constant innovation, constant progress
As a part of Danfoss, Danfoss Compressors shares a tradition for
technological leadership in many fields. Our contribution to the
advancement of compressor technology is aimed at enhancing efficiency and environmental safety while reducing noise emissions.
Danfoss was the first to market with R134a and R600a compressors, and we brought variable speed technology to the 220 V AC
compressors category.
At Danfoss Compressors, two forces - the advancement of
engineering technology and the demand for affordable refrigeration - will continue to drive us to develop the best technologies
and processes in the design, manufacturing, and support of our
products.
Danfoss – the number one choice of the world’s leading refrigeration OEM manufacturers.
Danfoss compressors are used in numerous applications, such as
white goods, mobile refrigeration, light commercial refrigeration,
commercial refrigeration and air conditioning.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Compressors
131
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
132
Direct current reciprocating compressors
Danfoss DC compressors perfectly suit applications like:
·
·
·
·
·
Trucks
Boats
Recreational vehicles
Medi boxes
Ice cream stands in holiday resorts
Tailored for cooling on the move
Designed for 12 V and 24 V direct current dual voltage, Danfoss
DC compressors are designed for refrigeration in areas without a
mains power supply, like cars, vans, boats and trucks.
The DC compressors BD35F/50F/80F/120CN/150CL and BD150F
for 12 V and 24 V DC power supply are tailored to be used in both
refrigerators and freezers with refrigerant R134a/R404A/R507/
R290/R600a. They are equipped with an electronic unit that protects against overload and destructive battery discharge.
Product advantages
·
·
·
·
Portable cooling boxes
Goods vehicles and trailers
Cars
Spot cooling systems
For ‘spot cooling’ systems, the BD350GH and BD350GH compressors are the right choice. Installed in, for example, sleeping cabins
in trucks, the sleeping compartment of caravans, golf buggies,
flight bridges on day cruisers and lift trucks, they lower the temperature and, at the same time, reduce humidity to a comfortable
level.
Danfoss DC compressors are unsurpassed in tolerating changeable
climatic conditions and vibrations under harsh road conditions, all
over the world.
Customer benefits
· Efficient and reliable
· Operation under extreme conditions
· Lasting performance
· Minimal energy consumption
· Low weight
· Portable beyond traditional limits
· Silent operation
· Low sound emission
· Ideal for solar energy supply
· Application possible at extreme voltage rate
· Compact design
· Fits virtually anywhere
· Energy optimisation
· Safeguard for your food
· Speed/capacity control
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Direct current reciprocating compressors
133
Refrigerant
Compressor
Code no
Code no
electronic
device
rpm
Capacity (EN 12900 Household/CECOMAF9 12 V d.c. static cooling)
-40
-35
-30
-25
-23.3
-20
-15
-10
-5
BD 35F
101Z0200
101N0210
3500
26.2
35.9
40.4
50.5
69.8
93.6
122
BD 50 F
101Z1220
101N0210
3500
36.7
52.2
58.3
71.4
94.9
123*
157*
54.8
78.0
86.7
105
138
176
221
111
153
170
205
269
345
62.9
0
5
7.2
10
15
BD 80 F
101Z0280
101N0280
4400
BD150F
102G4784
105N4220
4000
BD250GH
101Z0400
101N0280
4400
70.7
87.0
116
149
175
189
236
290
316
353
425
BD250/250GH
101Z0500
101N0280
4400
126
141
174
231
299
378
471
580
633
705
849
BD350GH 24 V DC
101Z0720
101N0710
4400
132
148
183
243
314
397
495
609
665
740
891
BD350GH 12 V DC
101Z0720
101N0700
4400
132
148
183
243
314
397
495
609
665
740
891
R290
BD100CN
101Z0401
101N0280
4400
83.4
108
117
137
170
209
R600a
BD35K
101Z0211
101N0210
3500
24.9
36.0
40.2
49.3
65.1
83.8
R134a
78
44.6
62.4
106
* Fan cooling of electronic unit compulsory
Power consumption is limited to 100 W with electronic unit 101N0500
Modern comfort is brought into life
when leaving home.
As people goes mobile, so does food.
The excellent performance of the BD
series safeguards food preservation.
With our outstanding DC compressor
for cars, vans, boats, trucks, etc., Danfoss
has transcended the barriers for mobile
refrigeration.
The direct current voltage compressors
BD35F/50F/80F and BD150F for 12 V
and 24 V DC power supply can be used
in both refrigerators and freezers with
refrigerant R134a/R290/R600a and are
equipped with an electronic unit that
protects against overload protection
and destructive battery discharge.
Even cooling without power supply
Thanks to an extensive voltage rate
the BD compressors are ideal for solar
energy supply. The exceptionally low
starting current eliminates the need
for current batteries if an ice bank is
used for energy storage. When storing
the sun energy in ice packs the cabinet
can be kept at desired temperatures
both night and day.
This feature opens for numerous uses
in areas without power supply like
storage and transportation of drugs,
ice cream stands in holiday resorts,
food preservation under off road
conditions, refrigerators in boats to
name but a few.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
134
Reciprocating compressors
Danfoss compressors perfectly suit applications like:
·
·
·
·
·
·
Laboratory and medical equipment
Clip-on units and condensing units
Compressed air dryers
Glass door merchandisers
Bakery refrigeration equipment
Ice cream cabinets
Highly energy-efficient compressors for household
and light commercial applications
Danfoss offers the world’s most comprehensive and high-quality
range of hermetic reciprocating compressors for refrigerators,
freezers and light commercial applications, such as bottle coolers
and display counters.
Available for use with refrigerant R134a, R404A, R407c, R600a and
R290, for 115V 60Hz and 230V 50HZ/60Hz, they cover the whole
spectrum of cooling needs for applications from 1.5 kW to 6 kW
and enable considerable energy savings.
Product advantages
· Smaller compressor dimensions or smaller displacements possible
- Higher cooling capacity
· Display cabinets –
low temperature
· Vending machines
· Soft ice cream machines
· Ice making machines (ML/DL)
· Blast freezers
· Slush/frozen beverage makers
· Small coolers for trucks, working
while stationary
· Heat pumps
· Milk cooling tanks
· Bottle coolers
Danfoss hermetic reciprocating compressors deliver a high cooling
capacity, particularly at low and very low evaporating temperatures, and are tailored to meet the wide range of specific requirements our customers demand. These include space-saving design,
enhanced functionalities, low noise emission, high reliability and
efficiency.
Customer benefits
· Extensive application range
· Low sound emission
· Low running costs
· Low noise level, innovative compressor technology
· Reduced installation costs
· Low energy consumption
· Operation with thermostatic expansion valve possible
- High cooling capacity
· Application at high ambient temperature possible
- Improved COP
· Small start equipment
· High appliance and system robustness in rough operating
conditions
· High starting torque
· Immune to unstable electric power supply
· High thermal working conditions
- Oil and surface cooling
- Integrated winding protection
· High product quality
· Wide voltage range:
- 220-240 V 50 Hz programme
- 208-230 V 60 Hz programme (contact Danfoss)
- 115 V 60 Hz programme (contact Danfoss)
· Dual frequency models
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
135
R134a hermetic compressors · 220-240 V · 50 Hz
HBP
MBP
LBP
LBP/BMP
LBP
HBP / MBP / (LBP)
Application
Compressor
Code numbers
ComCompressor
pressor
with
oil cooling
PL35G
TL2.5G
TL3G
TL4G
TL5G
FR6G
FR7.5G
FR8.5G
FR10G
101G0250
102G4251
102G4350
102G4452
102G4550
103G6660
103G6680
103G6780
103G6880
FR11G
SC10G
SC12G
SC15G
SC18G
SC21G
SC12/12G
SC15/15G
SC18/18G
SC21/21G
103G6980
104G8000
104G8240
104G8520
104G8820
104G8140
104G8280
104G8580
104G8880
104G8180
PL50F
TL4F
TL5F
TLS5F
TLS6F
TLS7F
NL6F
NL7F
NL8F
NL9F
NL11F
101G0220
102G4400
102G4501
102G4520
102G4620
102G4720
105G6606
105G6706
105G6822
105G6802
105G6900
NF7FX P
NF10FX P
NF11FX P
SC15F
SC18F
SC21F
105G6743
105G6846
105G6944
104G8500
104G8800
104G8100
107B0700
107B0701
102G4455
103G6683
104G8041
104G8261
104G8561
104G8860
104G8861
GS26MFX M
GS34MFX M
TL4GH
FR7GH
SC10GH
SC12GH
SC15GH
SC18GH
SC18GH
SC15GHH
Compressor
design
-35
-30
11
22.4
25.3
40.8
55.6
47.7
61.7
84.9
91.9
103G6690
103G6790
103G6890
5
140
179
211
280
341
452
505
592
638
7.2
153
196
231
306
372
494
553
647
697
10
172
219
258
342
414
552
618
722
779
15
209
264
312
413
497
191
135
199
206
318
370
399
413
636
741
45
67
91
109
115
133
123
151
163
172
222
233
183
252
290
394
453
505
581
788
907
307
268
348
424
526
606
696
847
1052
1212
395
369
464
568
684
792
928
1137
1368
1584
780
764
960
1110
1337
1560
1920
2220
2674
3120
833
1054
1207
1459
1700
2108
2415
2918
3400
925
1182
1340
1624
1889
2364
2679
3248
3778
1100
1437
1600
1950
2257
2875
3201
3900
4511
56
81
110
131
139
160
151
182
194
207
268
74
107
144
170
183
208
200
238
249
268
351
95
137
183
216
235
264
258
303
317
340
453
167
217
238
260
314
375
199
258
283
325
388
454
754
958
260
336
366
439
518
602
989
1246
104
199
233
539
485
332
428
465
573
669
780
1266
1596
140
255
352
429
559
676
639
435
570
129
226
105G6812
105G6910
14
31
43
48
58
66
52
71
82
74
102
26
44
60
71
77
89
77
99
112
111
146
170
113
175
164
283
333
350
328
566
667
40
61
82
98
104
120
110
136
149
155
200
104G8510
104G8810
104G8110
79
104
114
100
129
186
110
144
159
155
194
246
151
197
216
230
280
335
103G6692
Optimization
level
Model designation
Compressor
Application
size
range
Blank
Standard
energy level
S
Semi-direct
intake
Exception:
For PL
compressors
the
capacity at
rating point
is stated.
G
R134a LBP/
MBP/HBP
GH
R134a Heat
pumps
GHH
R134a Heat
pumps (opt.)
MF
R134a MBP
390
503
545
501
486
603
728
870
1012
1206
1457
1740
2025
628
618
768
908
1087
1268
1535
1815
2174
2536
1476
1866
167
301
425
505
669
789
758
417
538
583
726
842
987
1591
2013
182
327
478
577
723
855
825
1970
2505
230
417
613
752
915
1077
1047
2411
3079
287
525
762
957
1139
1340
1310
2626
3360
315
580
832
1058
1249
1469
1440
353
655
927
1196
1398
1645
1618
429
807
1113
1471
1698
1990
1976
670
726
911
1135
1247
1405
1731
Evporating temp.
-35 -25 -10
48 66.6
47.6 59.6 83.9
65.8 96.2
82.7 118
100 149
109 172
126 194
151 231
179 265
43
60
70
82
84
97
80
71
82
109
137
317 445
290 383
355 493
440 595
507 695
575 789
710 986
879 1190
1014 1390
1156 1581
85
122
154
162
181
207
185
303
317
260
331
134
214
236
186
206
275
176
272
291
275
313
380
235
354
383
432
492
600
314
462
512
695
924
121
192
281
356
424
498
452
941
1025
159
258
395
487
565
697
605
377
505
296
516
667
720
1323
1787
2041
2389
Blank =>
universal
(principal rule)
X = HST
characteristics
(expansion
valve)
5
F
NL
TL
S
9
F
SC
15
GHH
GS
26
MF
X
Accessories for SC Twin
SC10/10, SC12/12 and SC15/15:
Service valve for 12 mm tube
Solder connector for 12 mm tube
SC18/18 and SC21/21:
Service valve for 16 mm tube
Solder connector for 16 mm tube
SC10/10, SC12/12, SC15/15, SC18/18 and SC21/21:
Seal ring for service valve and solder connector
Time-delay relay
Check valve (to be used with time-delay relay)
118-7350
104B0584
118-7351
118-7405
118-3638
117N0001
020-1014
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
136
[°C]
5
90
113
133
154
205
241
272
321
362
202
181
227
233
331
382
454
465
662
771
60
81
101
112
119
136
118
136
149
167
212
93
148
Examples
Start
characteristics
F
R134a LBP/
(MBP)
Nominal
displacement
in cm3
463
445
553
672
804
934
1106
1344
1607
1868
20
d.o.o.
GS
Evaporating temperature [°C]
-15
-10
-6.7
-5
0
53
69.4
82
89
112
69
90.4 107
116
145
80.5 106
125
136
170
107
140
165
180
226
139
178
208
224
278
171
226
267
290
365
193
254
299
325
408
228
298
351
381
478
250
324
380
412
516
G R U P A
SC
-20
39.3
50.9
59.1
80.3
107
124
142
171
188
104G8571
TL
FR
-23.3
31.6
40.5
46.7
65.3
87.9
96.5
113
138
152
115
60
113
PL
NL
-25
28
35.5
40.9
58.3
79
83.3
99
123
136
23
64.6
104G8250
104G8530
104G8830
EN 12900 (CECOMAF)
Power consumption [W]
EN 12900 (CECOMAF)
Capacity [W]
Displacement
[cm3]
2.00
2.61
3.13
3.86
5.08
6.23
6.93
7.95
9.05
Recommended
Voltage
compressor cooling
and
LST (RSIR)
at
frequenPTC Starting
ambient temperature
cies
device
32°C
38°C
43°C
spades
LBP MBP HBP LBP MBP HBP LBP MBP HBP
6.3 mm
4.8 mm
F2
F2
F2
F2
1/5
103N0011 103N0018
S
S
S
S
S
S
S
S
F2 1/2/3/6 103N0011 103N0018
S
S
F2
S
S
F2
S
S
F2
1/2/3
103N0011 103N0018
S
S
F2
S
S
F2
S
S
F2
1/2/3
103N0011 103N0018
S
S
F2
S
S
F2
S
S
F2
1/2/3
103N0011 103N0018
S
S
F2
S
S
F2
S
S
F2
1/2/3
103N0011 103N0018
S
F2
F2
S
F2
F2 O/F1 F2
F2
1/2/3
103N0011 103N0018
S
F2
F2 O/F1 F2
F2 O/F1 F2
F2
1/2/3
103N0011 103N0018
S
F2
F2 O/F1 F2
F2 O/F1 F2
F2
1/2/3
103N0011 103N0018
11.15
F2
10.29
F1
12.87
O/F1
15.28
O/F1
17.69
O/F1
20.95
F2
2 x 12.87 F2
2 x 15.28 F2
2 x 17.69 F2
2 x 20.95 F2
2.50
3.86
5.08
5.08
5.70
6.49
6.13
7.27
7.95
8.35
11.15
S
S
S
S
S
S
S
S
S
S
O/F1
7.27
10.09
11.15
15.28
17.69
20.95
26.30
33.80
3.86
6.93
10.29
12.87
15.28
17.69
17.69
S
F1
F2
O/F1
O/F1
O/F1
15.28
F2
F1
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F1
O/F1
O/F1
O/F1
F2
F2
F2
F2
F2
F2
F1
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F1
O/F1
O/F1
O/F1
F2
F2
F2
F2
F2
F2
F1
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
F2
S
S
S
S
S
S*
S
S
S
S
O/F1
S
F1
F2
F1
F2
F2
O/F1
O/F1
O/F1
103N0011
103N0002
103N0002
1
1
1
1
1
1
1
1
1
1
1
103N0011
103N0011
103N0011
103N0011
103N0011
103N0011
103N0011
103N0011
103N0011
103N0011
103N0011
F2
O/F1
F2
F2
F2
F2
F2
F2
O/F1
F2
F2
F2
F2
F2
F2
O/F1
F2
F2
F2
F2
F2
4/5
4
4
1
1
1
1
1
1/4
1/4
1/4
1/4
1/4
1
1/4
O
O
O
1
F2
F2
F1
F2
F2
1/2
1/2/3
1/2/3
1/2/3
1/2/3
1/2/3
1
1
1
1
F2
F2
F2
F2
Applications
LBP: Low Back Pressure
HBP: High Back Pressure
MBP: Medium Back Pressure
Motor types
RSIR: Resistant Start Induction Run
RSCR: Resistant Start Capacitor Run
CSIR: Capacitor Start Induction Run
CSR: Capacitor Start Run
117U5015
117U5017
117U5017
117U5017
117U5017
117U6003
117U6005
117U6019
117U5017
117U5017
117U5017
117-7028
117-7028
103N0018
103N0018
103N0018
103N0018
103N0018
103N0018
103N0018
103N0018
103N0018
103N0018
103N0018
117U6009
117U6004
117U6004
117U6004
117U6000
117U6004
117U6000
117U6001
117U6001
117U6002
117U5014
117U5014
117U5014
117U5014
117U5014
117U5015
117U5015
117U5015
117U5015
117U5015
103N0016
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N0491
103N2011
103N2010
103N2010
103N2010
103N2010
103N2010
103N2010
PL35G
TL2.5G
TL3G
TL4G
TL5G
FR6G
FR7.5G
FR8.5G
103N1010
103N1010
103N1004
103N1004
103N1004
103N1004
103N1004
103N1004
103N1004
103N1004
103N1004
103N2010
103N2010
103N2009
103N2009
103N2009
103N2009
103N2009
103N2009
103N2009
103N2009
103N2009
FR10G
FR11G
SC10G
SC12G
SC15G
SC18G
SC21G
SC12/12G
SC15/15G
SC18/18G
SC21/21G
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N1010
103N0491
103N2010
103N2010
103N2010
103N2010
103N2010
103N2010
103N2010
103N2010
103N2010
103N2010
PL50F
TL4F
TL5F
TLS5F
TLS6F
TLS7F
NL6F
NL7F
NL8F
NL9F
NL11F
117U4140 117U5018
2x117U0349 117U1023
PNF7FX
117U4139 117U5018
2x117U0349 117U1021 PNF10FX
117U4139 117U5018
2x117U0349 117U1023 PNF11FX
103N0002
117U6003 117U5017
103N1004 103N2009
SC15F
117U6005 117U5017
103N1004 103N2009
SC18F
117U6019 117U5017
103N1004 103N2009
SC21F
Starting device (start. relay, start. & run capacitor): 117-7055
107B9100/9101/9104 MGS26MFX
Starting device (start. relay, start. & run capacitor): 117-7056
107B9100/9101/9104 MGS34MFX
117U6000 117U5014
103N1010 103N2011
TL4GH
117U6016 117U5015
103N1010 103N2011
FR7GH
117U6005 117U5019
103N1004 103N2008
SC10GH
117U6011 117U5019
103N1004 103N2008
SC12GH
117U6011 117U5019
103N1004 103N2008
SC15GH
117U6019 117U5017
103N1004 103N2009
SC18GH
117-7038 103N1004 103N2008
SC18GH
117-7012
Test conditions EN 12900 (CECOMAF)
PL/TL/TLS/TLES/NL/NLE/FR/SC
Application
Condensing temperature
Ambient temperature
Suction gas temperature
Liquid temperature
220 V / 50 Hz
R134a
55°C
32°C
32°C
55°C
Test conditions EN 12900 (CECOMAF)
GS
Application
MPB
HBP
Condensing temperature
45°C
50°C
Ambient temperature
32°C
32°C
Suction gas temperature
20°C
20°C
Liquid temperature
no subcooling
220 V / 50 Hz
103N1004 103N2009
SC15GHH
Compressor cooling
S = Static cooling normally sufficient
O = Oil cooling
F1 = Fan cooling 1.5 m/s
(compressor compartment temp.
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
* = O/F1 possible at 220 V
nominal (187-242 V)
Voltages and frequencies
1 = 198-254 V, 50 Hz
2 = 187-254 V, 50 Hz, LBP
3 = 198-254 V, 60 Hz, LBP
4 = 198-254 V, 60 Hz
5 = 198-254 V, 60 Hz, MBP
6 = 207-254 V, 60 Hz, HBP
1 Watt = 0.86 kcal/h
1 Watt = 3.41 Btu/h
HST: High Starting Torque
HST consisting of relay and starting capacitor, is used
for expansion valve control or for capillary tube control
withoutMB
pressure
equalizing.
FRIGO
Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
d.o.o.
Note: To fulfil the requirements of EN 60355-2-34 the
protection screen 103N0476 must be applied to the
PTC starting device.
117U6010
117U6002
117U6003
117U6005
117U6019
Compressor
LST/HST
Cord
Cover
relief
G R U P A
Starting devices
LST: Low Starting Torque
LST is used with capillary tube control and pressure
equalizing. (Pressure equalizing may exceed 10 minutes). The PTC starting device requires 5 minutes cooling
before each start.
103N0018
Electrical Equipment
HST (CSIR)
HST (CSR)
Starting
Starting
Starting
relay
capacitor
device
spades
spades
6.3 mm
6.3 mm
6.3 mm
117U6021 117U5014
117U6007 117U5014
117U6009 117U5014
117U6004 117U5014
117U6000 117U5014
117U6000 117U5015
117U6001 117U5015
117U6015 117U5015
117U6010 117U5015
Reciprocating Compressors
137
Dimensions
Connectors
location/I.D. [mm]
TL
PL
TLS
Suc- Pro- DisOil
tion cess charge cooler
ø16
ø16
70
70
F
ø16
170
E
6.2
6.2
6.2
170
C or
D
C
D
D
C
or
D
170
C
E
E
AB
B A
AB
206
222
222
8300
8301
157
157
8301-7
FR
NL
SC
ø19
ø16
ø19
70
ø16
70
6.2
6.2
127
ø16
170
D
127
6.2
6.2
6.2
170
E
D
C
E
C
127
170
D
C
E
6.2
6.2
6.2
A B
A B
B A
254
F
243
F
8302
255
8303
F
8.2
151
8304
156
E
5.0
5.0
5.0
5.0
5.0
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.2
6.2
6.5
6.5
6.5
6.2
6.2
6.2
8.2
8.2
5.0
8.2
8.2
8.2
8.2
8.2
8.2
8.2
70
D
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.5
6.5
6.5
6.2
6.2
6.2
6.5
6.5
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
130
C
6.2
6.2
6.2
6.2
6.2
8.2
8.2
8.2
8.2
8.2
8.2
8.2
10.2
8.2
10.2
12
12
16
16
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
6.2
8.2
8.2
8.2
8.2
8.2
8.2
10.2
10.2
12.9
12.9
6.2
8.2
10.2
10.2
10.2
10.2
10.2
10.2
70
A B
PL35G 137 135
TL2.5G 163 159
TL3G 163 159
TL4G 173 169
TL5G 173 169
FR6G 196 191
FR7.5G 196 191
FR8.5G 196 191
FR10G 196 191
FR11G 196 191
SC10G 199 193
SC12G 209 203
SC15G 209 203
SC18G 219 213
SC21G 219 213
SC12/12G 249 244
SC15/15G 249 244
SC18/18G 259 254
SC21/21G 259 254
PL50F 137 135
TL4F 163 159
TL5F 173 169
TLS5F 173 169
TLS6F 173 169
TLS7F 173 169
NL6F 188 181
NL7F 190 183
NL8F 197 191
NL9F 197 191
NL11F 203 197
PNF7FX 203 197
PNF10FX 203 197
PNF11FX 203 197
SC15F 209 203
SC18F 209 203
SC21F 219 213
MGS26MFX 259 247
MGS34MFX 259 247
TL4GH 173 169
FR7GH 196 191
SC10GH 199 193
SC12GH 209 203
SC15GH 209 203
SC18GH 219 213
SC18GH 219 213
SC15GHH 209 203
M= preliminary data
127
Height
[mm]
166
Compressor
R134a hermetic compressors · 220-240 V · 50 Hz
8.2
GS
Mounting accessories
SC Twin
Nut M6
Washer
Grommet sleev
Compressor base
3327-2
Screw M6 x 25
Bolt joint for one compressor:
in quantities:
Rubber grom
ø16
C
203
D
175
302
C
118-1917
118-1918
E
Bolt joint for one GS compressor: 107B9150
Washer
127
D
B A
A
B
Clip
1"-14 UNF
8542-2
7382-2
Cabinet base
Rubber grommet
118-1919
326
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
138
8305
d.o.o.
Snap-on in quantities:
173
9
235
G R U P A
Steel pin
Compressor base
E
320
Cabinet base
100
122
9
127
ø19
LST - RSIR
TL-TLS-NL-FR
PL
g
SC
g
b
b
b
8217
8224
a1
8221
a1
a1
d
d
d
N
L
C
N
N
L
C
HST - CSIR
TL-TLS-NL-FR
PL
c
C
L
Winding protector
Winding protector
Winding protector
Start winding
N
N
N
a1
Main winding
Main winding a1 Start winding
Main winding a1 Start winding
SC
c
c
b
8222
b
b
a2
8225
8219
a2
a2
d
d
d
c
c
c
11
10
11
10
11
10
12
13
14
12
12
13
13
14
14
Start winding
Main winding
Main winding
Winding protector
Main winding
Start winding
Winding protector
Winding protector Start winding
HST - CSR
SC
GS
a3
a2
Legend
a3
a2
e
a1:
a2:
a3:
b:
b1/b2:
c:
d:
e:
g:
e
TOP
TOP
c
S C
R
c
8227
8543
d
d
b
Winding
protector
Main winding
e
Start winding
2
5
a2
Main winding
1
1
2
N
L
2
N
L
Start winding
b1
b
R un (blue)
C
e
5
2
4
1
a2
R
S
Bleeder resistance
1
4
Winding
protector
b2
c
a3
1
1
2
N
L
2
N
L
Earthing
(yellow/green)
S tart (black)
C ommon (brown)
PTC starting device
Starting relay
Starting device
Cover
Clamp/Gasket (parts of compressor)
Starting capacitor
Cord relief
Run capacitor
Protection screen for PTC
Bleeder resistance
c
a3
M
M
Fan
Thermostat
Fan
HST - CSR
HST - CSIR
SC Twin
Winding protector
Starting capacitor
Main winding Starting relay
Run capacitor
Start winding
Bleeder resistance
SC Twin
Starting relay
Starting capacitor
10 11
12
5
2
4
1
4
1
1
2
N
L
1
2
N
L
2 1
1
2
N
L
1
2
N
L
2 1
M
Time delay
relay
Safety pressure control
1
2
N
L
Fan
Thermostat 2
Start winding
Winding
protector
Thermostat
1
2
N
L
Blue
Black
Brown
3
Time delay relay
Thermostat 2
13
14
M
Fan
Safety pressure control
Remove wire L-1 if time delay is used
Remove wire L-1 if time delay is used
12
Remove wire 1-2 if thermostat 2 is used
d.o.o.
Thermostat
14
1
2
N
L
Blue
Black
Brown
3
13
Main winding
1932
2
G R U P A
1
2
N
L
5
10 11
1933
Thermostat
Remove wire 1-2 if thermostat 2 is used
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
139
Application
MBP
R404A
3 Phase
LBP
HBP
R404A
MBP
1 Phase
R404A
LBP
Refrigerant
R404A/R507 hermetic compressors · 220-240 V · 50 Hz & 60 Hz incl. GEEP range
Compressor
code
number 2)
Compressor
incl. the
GEEPTM range
TL4CL
TL4.5CLX
FR6CL
FR7.5CL
FR8.5CL
NL7CLX
NL8.4CLX M
SC10CLX1)
SC12CLX.21)
SC15CLX.21)
SC18CLX.21)
SCE18CLX.21)
SC21CL
GS26CLX * GEEPTM
GS34CLX * GEEPTM
NTZ0481)
NTZ0681)
NF7MLX
SC10MLX
SC12MLX
SC15MLX
SC18MLX
SC18MLX.3
GS21MLX * GEEPTM
GS26MLX * GEEPTM
GS34MLX * GEEPTM
MPZ0381) GEEPTM
MPZ0481) GEEPTM
MPZ0541) GEEPTM
MPZ0611) GEEPTM
MPZ0681) GEEPTM
TL4DL
FR6DL
SC10DL
SC12DL
SC15DL
SC10/10DL
SC12/12DL
SC15/15DL
NTZ0481)
NTZ0681)
MPZ0381) GEEPTM
MPZ0481) GEEPTM
MPZ0541) GEEPTM
MPZ0611) GEEPTM
MPZ0681) GEEPTM
SC
EN 12900 (CECOMAF)
Capacity [W]
102U2071
102U2111
103U2670
103U2790
103U2890
105F3710
105F3800
104L2533
104L2697
104L2896
104L2197
104L2196
104L2322
107B0500
107B0501
120F0089
120F0090
105F3720
104L2506
104L2606
104L2869
104L2139
104L2146
107B0502
107B0503
107B0504
120F0153
120F0154
120F0155
120F0156
120F0157
102U2038
103U2680
104L2525
104L2625
104L2856
104L4091
104L4092
104L4093
120F0008
120F0009
120F0057
120F0058
120F0059
120F0060
120F0061
-40
-35
-30
-25
-23.3
52
65
80
108
114
126
146
158
84
106
145
154
168
199
216
166
294
358
439
439
455
703
986
964
1756
110
139
189
202
222
263
287
255
399
486
595
595
617
949
1297
1405
2332
142
181
243
262
290
340
370
360
522
637
780
780
813
1240
1663
1931
3030
155
197
263
285
317
369
402
400
569
694
849
849
887
1348
1807
2131
3297
182
232
307
333
372
430
468
483
666
813
995
995
1042
1580
2092
2550
3863
465
572
710
831
876
546
669
829
968
1018
77
86
99
102
111
130
159
194
194
226
325
261
779
205
250
306
306
325
497
721
527
1130
851
1214
1250
1484
1889
289
673
558
1075
995
1750
1424
2380
879
1173
1250
1484
1777
GS
ø19
ø16
Evaporating temperature [°C]
-20
-15
-10
-6.7
-45
1289
1823
1997
2368
2828
1931
3122
1342
1846
1997
2328
2732
1426
2006
2224
2580
3098
2122
3402
1484
2047
2700
3106
3011
1535
1925
1722
2398
2700
3106
3665
196
317
471
609
759
943
1217
1518
2522
3988
1791
2467
2224
2580
3592
230
294
383
418
468
536
583
625
834
1017
1245
1245
1306
1974
2577
3270
4849
526
687
838
1038
1210
1266
1419
1917
2397
2257
3091
3518
4003
4636
229
385
611
806
964
1222
1612
1928
3204
4992
2339
3183
3518
4003
4579
286
366
473
515
577
657
715
789
1026
1251
1532
1532
1606
2427
3120
4100
6001
645
855
1038
1285
1497
1557
1777
2365
2952
2904
3914
4465
5030
5758
281
471
775
1028
1207
1550
2055
2414
3987
6146
2995
4005
4465
5030
5707
-5
0
5
1190
1430
781
1051
1272
1574
1832
1898
2186
2854
3585
3675
4881
5555
6201
7051
349
576
968
1279
1493
1935
2559
2985
936
1278
1542
1909
2220
2292
2642
3401
4286
4580
6004
6803
7528
8530
432
698
1192
1565
1825
2383
3130
3651
1110 1193 1305
1537
1852 2001
2293 2478
2665 2880
2743 2964
3140 3354
3990 4260
5060 5418
5628 6138 6831
7298 7924 8774
8222 8968 9826
9023 9738 10700
10215 11026 12123
527
527
631
840
907
999
1450 1576 1747
1890 2046 2258
2210 2397 2652
2900 3152 3494
3780 4092 4516
4420 4795 5304
3770
4943
5555
6201
6992
4673
6009
6803
7528
8449
5715 6220 6906
7212 7788 8563
8222 8904 9826
9023 9738 10700
10093 10880 11940
328
352
541
587
578
630
746
812
910
796
866
977
1424
1519
733
981
1188
1471
1712
1779
2044
2680
3359
3399
4535
5168
5786
6591
329
538
899
1190
1391
1798
2380
2781
3492
4611
5168
5786
6537
7.2
10
NTZ
MPZ
ø 224
C
ø19
127
70
D
122
C
D
127
170
D
C
203
D
A
E
C
B A
B
E
E
B A
E
8638
B A
8639
234
190
162
235
33°
227
190
173
254
8542-4
151
8304-5
35°
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
140
d.o.o.
Note:
On GS34CLX compressors suction
and process connectors are
interchanged.
G R U P A
255
15
1177
2085
2674
3156
4169
5348
6311
EN 12900 (CECOMAF) DisPower consumption placement
[W]
Evporating temp.
[°C]
-35 -25 -10
5
140
181
242
267
315
274
305
352
475
565
680
621
702
888
1165
1342
2067
930
1326
1420
1676
2091
1328
2017
966
1288
1420
1676
1942
198
252
353
395
472
381
428
508
659
783
949
888
989
1285
1696
1885
2936
398
518
620
780
860
878
981
1207
1722
1374
1869
2154
2522
2965
203
354
479
624
722
957
1248
1445
1884
2843
1419
1896
2154
2522
2905
631
556
633
762
979
1080
1096
1210
1478
2204
1711
2352
2725
3159
3682
256
456
590
750
865
1180
1500
1730
1739
2361
2725
3159
3706
[cm3]
3.86
4.63
6.23
6.93
7.95
7.27
8.35
10.29
12.87
15.28
17.68
17.68
20.95
26.30
33.80
48.1
67.9
7.27
10.29
12.87
15.28
17.68
17.68
21.20
26.30
33.80
38.1
48.1
53.9
60.5
67.9
3.86
6.23
10.29
12.87
15.28
2x10.29
2x12.87
2x15.28
48.1
67.9
38.1
48.1
53.9
60.5
67.9
Voltage
and
frequencies
Electrical equipment (HST), spade dimensions
LBP MBP HBP LBP MBP HBP LBP MBP HBP
F₂
F₂
F₂
F₂
F₂
F1
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F1
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
F₂
F₂
F1
F₂
F₂
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
SG
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
SG
SG
SG
SG
SG
F₂
1
7
1
1
1
1
7
F₂
F₂
F₂
F1
F₂
F₂
F₂
F₂
F₂
F₂
HST (CSIR)
HST (CSR)
Starting
Starting
relay
capacitor
spades
6.3 mm
6.3 mm
Starting
device
spades
6.3 mm
117U6000
117U6001
117U6015
117U6016
117U6010
117U6002
117U6003
117U6005
117U6019
117U6019
117U6013
F₂
F₂
F₂
117U5014
117U5014
117U5015
117U5015
117U5015
117U5015
117U5015
117U5019
117U5019
117U5017
117U5012
117-7012
117-7012
117-7056
117-7074
7701028
7701028
F₂
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
SG
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
SG
SG
SG
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
SG
SG
SG
SG
SG
SG
F₂
F₂
F₂
7
117U4139
117U6011
117U6011
117U6013
117U5018
117U5019
117U5019
117U5012
117-7012
117-7012
117-7070
117-7072
117-7073
F₂
F₂
F₂
SG
SG
SG
SG
SG
F₂
F₂
F₂
F₂
F₂
F₂
F₂
F₂
1
1
1
1
1
1
1
1
SG
SG
117U6001
117U6010
117U6005
117U6019
117U5014
117U5015
117U5017
117U5017
117U6005
117U6019
117U5017
117U5017
117-7028
117-7028
SG
SG
SG
SG
SG
SG
SG
LST/HST
Cord
relief
Cover
103N1010 103N2010
103N1004 117U1022
103N1010 103N2010
103N1010 103N2010
103N1010 103N2010
103N1010 103N2010
103N1010 103N2010
103N1004 103N2008
103N1004 103N2008
103N1004 103N2009
103N1004 103N2009
103N1004 103N2009
103N1004 103N2009
107B9100/9101/9104
107B9100/9101/9104
8156134
8156134
2x117U0349 117U1021
103N1004 103N2009
103N1004 103N2009
103N1004 103N2009
103N1004 103N2009
103N1004 103N2009
107B9100/9101/9104
107B9100/9101/9104
107B9100/9101/9104
103N1010
103N1010
103N1004
103N1004
103N1004
103N1004
103N1004
103N1004
103N2010
103N2010
103N2009
103N2009
103N2009
103N2009
103N2009
103N2009
8156134
8156134
1)
NL
TL
FR
Single
pack
code
number
195B0151
195B0379
195B0399
195B0332
on request
195B0070
195B0427
195B0439
120F0087
120F0088
195B0345
195B0323
195B0391
195B0392
195B0412
195B0436
195B0437
195B0438
120F0143
120F0144
120F0145
120F0146
120F0147
120F0001
120F0002
120F0047
120F0048
120F0049
120F0050
120F0051
available for 60 Hz also
ø19
ø16
170
70
70
70
127
ø16
127
ø16
C or
D
170
or
D
C
D
D
C
E
C
A B
A B
AB
170
E
E
243
254
8301
G R U P A
222
8303-4
156
8302-3
166
157
105
138
180
197
231
214
271
258
365
433
517
459
534
669
909
Recommended compressor cooling
at
ambient temperatures
32 °C
38 °C
43 °C
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
141
HBP
MBP
Compressor
incl. the
GEEPTM range
CSIR
Dimensions
Height
[mm]
TL4CL
TL4.5CLX
FR6CL
FR7.5CL
FR8.5CL
NL7CLX
NL8.4CLX
SC10CLX1)
SC12CLX.21)
SC15CLX.21)
SC18CLX.21)
SCE18CLX.21)
SC21CL
GS26CLX * GEEPTM
GS34CLX * GEEPTM
NTZ0481)
NTZ0681)
NF7MLX
SC10MLX
SC12MLX
SC15MLX
SC18MLX
SC18MLX.3
GS21MLX * GEEPTM
GS26MLX * GEEPTM
GS34MLX * GEEPTM
MPZ0381) GEEPTM
MPZ0481) GEEPTM
MPZ0541) GEEPTM
MPZ0611) GEEPTM
MPZ0681) GEEPTM
TL4DL
FR6DL
SC10DL
SC12DL
SC15DL
SC10/10DL
SC12/12DL
SC15/15DL
A
173
173
196
196
196
203
203
209
219
219
219
219
219
259
259
333
333
203
209
219
219
219
219
259
279
279
356
356
356
356
356
173
196
209
219
219
249
249
259
B
169
169
191
191
191
197
197
203
213
213
213
213
213
247
247
263
263
197
203
213
213
213
213
247
267
267
342
342
342
342
342
169
191
203
213
213
244
244
254
Connectors
location/I.D. [mm]
Suc- Pro- Distion cess charge
C
D
E
6.2 6.2
5.0
6.2 6.2
5.0
8.2 6.2
6.2
8.2 6.2
6.2
8.2 6.2
6.2
8.2 6.2
6.2
8.2 6.2
6.2
8.2 6.2
6.2
8.2 6.2
6.2
10.2 6.2
6.2
10.2 6.2
6.2
10.2 6.2
6.2
10.2 6.2
6.2
12.9 6.5
8.2
12.9 6.5
8.2
5/8” Flare 1/2”
5/8” Flare 1/2”
9.7 6.5
6.5
8.2 6.5
6.5
8.2 6.5
6.5
10.2 6.2
6.2
10.2 6.2
6.2
10.2 6.2
6.2
12.9 6.5
8.2
16.1 6.5
9.7
16.1 6.5
9.7
3/4” 3/8” 1/2”
3/4” 3/8” 1/2”
3/4” 3/8” 1/2”
3/4” 3/8” 1/2”
3/4” 3/8” 1/2”
6.2 6.2
5.0
8.2 6.2
6.2
8.2 6.2
6.2
10.2 6.2
6.2
10.2 6.2
6.2
12 6.2
6.2
12 6.2
6.2
16 6.2
6.2
NTZ0481)
NTZ0681)
MPZ0381) GEEPTM
MPZ0481) GEEPTM
MPZ0541) GEEPTM
MPZ0611) GEEPTM
MPZ0681) GEEPTM
333
333
348
348
348
348
348
263
263
346
346
346
346
346
5/8”
5/8”
3/4”
3/4”
3/4
3/4”
3/4”
Flare
Flare
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
CSR
SC
MPZ
c
'*%
/,+..+$%
).+0
1!#&-."
b
8222
(1!#&-."
a2
d
c
12
11
10
13
14
Refrigerant
R404A
3 Phase
LBP
R404A
MBP
1 Phase
R404A
LBP
Application
R404A/R507 hermetic compressors · 220-240 V · 50 Hz & 60 Hz incl. GEEP range
Start winding
Main winding
Winding protector
CSR
CSR
SC
NTZ
a3
a2
e
TOP
c
Spade connectors 1/4”
Hole Ø 21 mm (0.83 in)
Earth M4-12
8227
Knock-out Ø 21 mm (0.83 in)
d
b
e
Start winding
5
2
4
1
a2
Main winding
Winding
protector
1
1
2
N
L
2
N
L
Bleeder resistance
c
a3
M
Fan
Thermostat
CSR
Legend
GS
a3
a2
e
TOP
c
S C
R
8543
d
Winding
protector
Main winding
Start winding
S tart (black)
C ommon (brown)
b1
b
R un (blue)
C
e
5
2
4
1
a2
R
S
1
1
2
N
L
2
N
L
c:
d:
e:
PTC starting device
Starting relay
Starting device
Cover
Clamp/Gasket
(parts of compressor)
Starting capacitor
Cord relief
Run capacitor
Bleeder resistance
c
M
Thermostat
Fan
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
142
d.o.o.
a3
G R U P A
b2
Earthing
(yellow/green)
a1:
a2:
a3:
b:
b1/b2:
HST - CSIR
TL-NL-FR
TL4.5CLX
c
c
8417
b
a2
8219
a2
b
d
a2
c
7
1
L
2
8
3
Main winding
11
10
N
4
11
10
13
12
c
12
Start winding
13
14
5
M
14
6
Winding protector
Main winding
Winding protector Start winding
Hermetic compressors type TL, NL, FR, SC, GS, MPZ, NTZ R404A/R507
Applications
LBP: Low Back Pressure
MBP: Medium Back Pressure
HBP: High Back Pressure
Motor types
CSIR: Capacitor Start Induction Run
CSR: Capacitor Start Run
Starting devices
HST: High Starting Torque
Test conditions EN 12900 (CECOMAF)
TL/NL/FR/SC
Application
R404A/R507
Condensing temperature 45°C
Ambient temperature
32°C
Suction gas temperature 32°C
No subcooling
220 V / 50 Hz
Test conditions EN 12900
GS/NTZ/MPZ:
Condensing temp. LBP
40°C
Condensing temp. MBP 45°C
Condensing temp. HBP 50°C
Ambient temperature
32°C
Suction gas temperature 20°C
NTZ at Te = -45°C, -40°C SH=20K
MPZ at Te = -30°C
SH=20K
Liquid temperature
no subcooling
220 V / 50 Hz
(GS)
230 V / 1 ph / 50 Hz
(NTZ/MPZ)
400 V / 3 ph / 50 Hz
(NTZ/MPZ)
Compressor cooling
S = Static cooling normally sufficient
O = Oil cooling
F1 = Fan cooling 1.5 m/s
(compressor compartment temp.
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
F2 = Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally
sufficient
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
143
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
144
Reciprocating Compressors
Danfoss Maneurop compressors perfectly suit applications like:
·
·
·
·
·
Walk-in freezers & cold rooms
Frozen food processing and storage
Blast freezers
Low temperature racks
Ice flake machines
Universal compressors for commercial refrigeration
and air conditioning applications
Designed for refrigeration as well as air conditioning applications with refrigerants R22, R407C, R134a, R404A and R507A, the
Maneurop range covers all requirements in the 1.5 to 26 HP range.
Thanks to a very large internal volume, large oil sump, the sturdy
design of the compression parts and its 100% suction gas-cooled
electric motor, the Maneurop reciprocating compressor has
consistently proven itself capable of withstanding the harshest
conditions.
Product advantages
·
·
·
·
Ice cream machines
Display cabinets
Water chillers
Large packaged air conditioners
The range consists of single compressors with rotolock connections, suitable for parallel mounting as well as factory-made
tandem units.
Maneurop compressors are used in a large array of applications in
a variety of businesses, ranging from water chillers to large packaged air conditioners, as well as medium and low temperature
refrigeration systems for food storage and processing.
Customer benefits
· Efficient and reliable
· Operation under extreme conditions
· Designed for multiple applications
· Versatile: Suitable for air conditioning as well as chilling
applications
· Rugged
· Designed for high, medium and low evaporating
temperature applications
· No need for air circulation around the compressor
· Quick pull down capabilities
· Flexibility of location
· 100% suction gas-cooled motor
· High limit on maximum operating condensing temperature
· Simple to use
· Internal motor protection
· High efficiency circular valve design
· High torque motors
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
145
PRODUCT RANGE
1 cylinder
2 cylinders
4 cylinders
Tandem
2x4
1 cyl.
2 cyl.
1 cyl. 2 x 4 4 cyl.
2 cyl.
MT/MTZ018
MT/MTZ022
MT/MTZ028
MT/MTZ032
MT/MTZ036
MT/MTZ040
MT/MTZ044
MT/MTZ045
MT/MTZ050
MT/MTZ051
MT/MTZ056
MT/MTZ057
MT/MTZ064
MT/MTZ065
MT/MTZ072
MT/MTZ073
MT/MTZ080
MT/MTZ081
MT/MTZ100
MT/MTZ125
MT/MTZ144
MT/MTZ160
MTM/MTZ200 T
MTM/MTZ250 T
MTM/MTZ288 T
MTM/MTZ320 T
LTZ022*
LTZ028*
LTZ040*
LTZ044*
LTZ050*
LTZ088*
LTZ100*
LTZ176 T*
LTZ200 T*
NTZ048
NTZ068
NTZ096
NTZ108
NTZ136
NTZ215
NTZ271
NTZ430 T
NTZ542 T
2 x 4 4 cyl.
LBP Applications
M-HBP Applications
Model
Motor voltage code
1
3
4
5
6
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
120F0072 120F0029 120F0001 120F0087
120F0073 120F0031 120F0002 120F0088
120F0074 120F0033 120F0003
120F0075 120F0035 120F0004
120F0076 120F0037 120F0005
120F0039 120F0006
120F0041 120F0007
120F0024
120F0025
380/3/60
500/3/50
575/3/60
230/3/50
230/1/50
400/3/50
460/3/60
200-230/3/60
208-230/1/60
Nominal voltage
7
9
z
z
z
z
z
z
øD
1 cylinder
D
H
H1
H2
: 225 mm
: 333/358 mm
: 263 mm
: 68 mm
H
H1
H2
øD
z
z
z
z
z
2 cylinders
D
H
H1
H2
z
z
: 288 mm
: 415 mm
: 266 mm
: 75 mm
H
H1
H2
z
z
z
z
z
z
z
z
z
z
øD
4 cylinders
z
z
z
z
z
z
z
z
z
z
D
H
H1
H2
: 352 mm
: 519/540 mm
: 233 mm
: 125 mm
H
H1
H2
Tandem 2 x 4
z
z
z
z
z
z
H : 544/565 mm
D : 515 mm
W : 925 mm
H
W
D
M-HBP: Medium High Back Pressure - LBP: Low Back Pressure
* CT2 phased out January 2008
CODE NUMBERS FOR ORDERING MT, MTZ, LTZ SERIES
MTZ 100
Compressor size
Refer to above table Product range
V
I
Packaging*
I: Single pack
M: Industrial pack
Version*
V: Oil equalization + sight glass
Motor voltage code
Refer to above table Product range
* For single compressors
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
146
d.o.o.
Configuration
- : Single
T: Tandem
4
G R U P A
Compressor type / oil
MT: Medium temperature Mineral oil
MTZ: Medium temperature POE lubricant
LTZ: Low temperature POE lubricant
-
MTZ
Model
MTZ018
MTZ022
MTZ028
MTZ032
MTZ036
MTZ040
MTZ044
MTZ045
MTZ050
MTZ051
MTZ056
MTZ057
MTZ064
MTZ065
MTZ072
MTZ073
MTZ080
MTZ081
MTZ100
MTZ125
MTZ144
MTZ160
MTZ200
MTZ288
MTZ320
-15
Qo
1 020
760
580
1 320
1 030
810
1 650
1 350
1 140
1 940
1 560
1 260
2 650
2 250
1 860
3 070
2 680
2 260
2 880
2 270
1 820
2 890
2 280
1 690
3 350
2 630
2 100
3 270
2 580
1 950
3 720
2 930
2 300
3 210
2 510
1 940
4 200
3 320
2 580
3 740
2 960
2 210
5 040
4 000
2 990
4 320
3 500
2 680
5 940
4 860
3 830
5 460
4 520
3 580
6 360
5 100
4 150
8 160
6 430
4 940
10 500
8 630
6 970
11 500
9 610
7 920
12 700
10 200
8 300
16 300
12 900
9 880
20 900
17 300
13 900
23 100
19 200
15 800
-10
Pe
0.58
0.61
0.61
0.68
0.72
0.72
0.85
0.91
0.95
1.03
1.09
1.11
1.20
1.29
1.35
1.33
1.47
1.56
1.55
1.62
1.64
1.27
1.29
1.24
1.72
1.79
1.81
1.54
1.57
1.54
1.87
1.95
1.96
1.63
1.64
1.65
2.06
2.14
2.15
1.84
1.87
1.84
2.27
2.34
2.17
2.09
2.16
2.14
2.64
2.76
2.80
2.50
2.59
2.64
3.05
3.25
3.33
3.49
3.63
3.58
4.53
4.85
5.07
4.90
5.23
5.48
6.11
6.50
6.67
6.99
7.25
7.16
9.06
9.71
10.14
9.79
10.46
10.96
Qo
1 450
1 140
890
1 860
1 500
1 190
2 260
1 880
1 570
2 680
2 210
1 790
3 480
3 000
2 510
3 910
3 460
2 950
3 910
3 170
2 560
3 910
3 190
2 490
4 550
3 700
2 990
4 500
3 660
2 900
5 060
4 140
3 330
4 560
3 690
2 930
5 740
4 700
3 780
5 320
4 390
3 490
6 780
5 590
4 390
6 050
5 090
4 100
7 880
6 630
5 380
7 350
6 230
5 100
8 660
7 160
5 880
11 000
9 000
7 150
13 800
11 700
9 610
15 200
12 900
10 700
17 300
14 300
11 800
22 000
18 000
14 300
27 700
23 400
19 200
30 400
25 800
21 400
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
-5
Pe
0.64
0.69
0.71
0.76
0.81
0.84
0.94
1.02
1.08
1.17
1.25
1.29
1.33
1.45
1.54
1.44
1.61
1.74
1.70
1.80
1.85
1.42
1.49
1.51
1.90
2.01
2.07
1.71
1.80
1.85
2.08
2.20
2.26
1.83
1.88
1.95
2.31
2.43
2.50
2.07
2.17
2.22
2.53
2.67
2.59
2.36
2.50
2.58
2.94
3.11
3.22
2.76
2.93
3.07
3.38
3.65
3.82
3.95
4.17
4.24
5.01
5.40
5.71
5.44
5.84
6.17
6.77
7.29
7.64
7.91
8.35
8.48
10.02
10.81
11.43
10.88
11.67
12.34
Qo
1 980
1 600
1 270
2 520
2 080
1 670
3 030
2 560
2 120
3 590
3 020
2 470
4 490
3 910
3 300
4 890
4 370
3 770
5 190
4 290
3 490
5 180
4 290
3 460
6 040
5 020
4 100
6 030
4 970
4 040
6 720
5 620
4 600
6 240
5 160
4 190
7 610
6 400
5 240
7 250
6 110
5 010
8 880
7 510
6 080
8 150
7 010
5 810
10 200
8 750
7 250
9 700
8 320
6 950
11 500
9 670
8 020
14 400
12 100
9 840
17 900
15 300
12 800
19 700
16 900
14 100
23 000
19 300
16 000
28 900
24 200
19 700
35 800
30 700
25 600
39 300
33 800
28 200
0
Pe
0.70
0.76
0.80
0.84
0.91
0.95
1.03
1.13
1.22
1.30
1.40
1.48
1.45
1.60
1.72
1.56
1.75
1.92
1.83
1.96
2.07
1.55
1.67
1.76
2.06
2.21
2.32
1.86
2.00
2.12
2.27
2.44
2.56
2.00
2.11
2.24
2.53
2.71
2.84
2.27
2.43
2.57
2.77
2.99
3.01
2.59
2.81
2.98
3.23
3.46
3.64
3.00
3.24
3.48
3.68
4.02
4.29
4.37
4.69
4.89
5.46
5.94
6.36
5.98
6.45
6.88
7.35
8.04
8.58
8.73
9.39
9.78
10.92
11.89
12.73
11.95
12.90
13.76
Qo
2 610
2 150
1 720
3 310
2 770
2 250
4 000
3 410
2 830
4 710
4 020
3 320
5 690
4 990
4 250
6 030
5 420
4 720
6 760
5 670
4 650
6 730
5 650
4 630
7 850
6 630
5 470
7 890
6 580
5 420
8 720
7 420
6 150
8 290
6 970
5 760
9 870
8 440
7 020
9 570
8 180
6 830
11 400
9 800
8 110
10 700
9 320
7 870
13 000
11 300
9 480
12 500
10 800
9 170
14 900
12 700
10 600
18 500
15 800
13 100
22 700
19 700
16 600
25 000
21 700
18 200
29 800
25 400
21 300
37 100
31 600
26 200
45 400
39 400
33 200
50 000
43 300
36 500
5
Pe
0.74
0.82
0.88
0.90
0.99
1.06
1.11
1.23
1.35
1.41
1.54
1.65
1.56
1.74
1.91
1.65
1.89
2.10
1.94
2.12
2.27
1.65
1.83
1.97
2.20
2.40
2.57
1.97
2.17
2.36
2.44
2.66
2.85
2.15
2.31
2.51
2.73
2.97
3.18
2.43
2.67
2.88
2.98
3.30
3.44
2.79
3.08
3.34
3.50
3.80
4.06
3.22
3.54
3.87
3.91
4.35
4.74
4.71
5.16
5.51
5.87
6.46
7.00
6.49
7.06
7.59
7.82
8.70
9.48
9.42
10.33
11.03
11.73
12.91
14.00
12.99
14.11
15.19
Qo: Cooling capacity in W
Pe: Power input in kW
Qo
3 350
2 800
2 250
4 260
3 610
2 960
5 170
4 450
3 720
6 070
5 230
4 370
7 100
6 280
5 380
7 350
6 640
5 810
8 640
7 340
6 070
8 610
7 290
6 050
10 000
8 570
7 140
10 100
8 510
7 080
11 100
9 580
8 030
10 700
9 150
7 670
12 600
10 900
9 170
12 300
10 600
8 990
14 300
12 500
10 500
13 700
12 100
10 300
16 300
14 300
12 100
15 800
13 800
11 800
18 900
16 400
13 800
23 400
20 200
16 900
28 400
24 800
21 100
31 300
27 300
23 100
37 900
32 700
27 600
46 800
40 400
33 900
56 700
49 700
42 300
62 600
54 600
46 300
10
Pe
0.76
0.87
0.96
0.94
1.06
1.16
1.19
1.34
1.48
1.49
1.66
1.81
1.64
1.86
2.08
1.73
2.01
2.28
2.02
2.25
2.46
1.72
1.95
2.16
2.30
2.56
2.80
2.06
2.31
2.57
2.57
2.85
3.12
2.28
2.49
2.76
2.88
3.20
3.50
2.57
2.87
3.17
3.15
3.58
3.85
2.97
3.33
3.67
3.75
4.13
4.48
3.41
3.80
4.23
4.08
4.63
5.15
4.97
5.57
6.09
6.22
6.93
7.61
6.98
7.65
8.31
8.16
9.26
10.30
9.94
11.14
12.18
12.43
13.85
15.23
13.96
15.29
16.62
Qo
4 210
3 550
2 880
5 370
4 600
3 800
6 580
5 710
4 800
7 680
6 690
5 630
8 750
7 780
6 720
8 860
8 020
7 060
10 900
9 340
7 780
10 900
9 300
7 770
12 600
10 900
9 140
12 800
10 800
9 060
13 900
12 100
10 300
13 600
11 700
10 000
15 700
13 800
11 700
15 500
13 500
11 500
17 800
15 700
13 400
17 200
15 300
13 200
20 100
17 700
15 200
19 700
17 400
15 000
23 700
20 700
17 500
29 100
25 400
21 500
34 900
30 800
26 500
38 700
34 000
28 900
47 500
41 300
35 100
58 200
50 700
43 000
69 900
61 700
52 900
77 300
67 900
57 900
Superheat = 11.1 K
Subcooling = 8.3 K
15
Pe
0.77
0.91
1.03
0.96
1.11
1.25
1.25
1.43
1.61
1.55
1.76
1.96
1.70
1.97
2.23
1.79
2.12
2.44
2.07
2.35
2.63
1.78
2.05
2.32
2.37
2.69
3.01
2.13
2.42
2.74
2.65
3.01
3.37
2.37
2.64
2.99
2.99
3.40
3.80
2.67
3.04
3.42
3.27
3.83
4.24
3.13
3.54
3.97
3.96
4.42
4.88
3.59
4.05
4.57
4.16
4.84
5.50
5.12
5.89
6.60
6.49
7.34
8.18
7.42
8.21
9.00
8.32
9.68
11.01
10.24
11.77
13.20
12.98
14.67
16.37
14.84
16.41
18.01
Qo
5 200
4 430
3 620
6 660
5 750
4 800
8 260
7 210
6 110
9 580
8 400
7 140
10 700
9 530
8 270
10 600
9 600
8 490
13 500
11 700
9 830
13 500
11 600
9 800
15 600
13 600
11 500
15 900
13 500
11 400
17 200
15 100
12 900
17 000
14 800
12 700
19 400
17 100
14 700
19 300
16 800
14 500
21 800
19 400
16 700
21 300
19 000
16 600
24 500
21 800
18 900
24 300
21 600
18 800
29 300
25 700
22 000
35 700
31 400
26 800
42 600
37 800
32 600
47 200
41 700
35 700
58 600
51 400
44 000
71 300
62 700
53 700
85 100
75 600
65 300
94 400
83 400
71 500
Pe
0.76
0.93
1.09
0.97
1.15
1.32
1.29
1.51
1.73
1.57
1.83
2.08
1.73
2.05
2.37
1.82
2.21
2.59
2.08
2.42
2.77
1.80
2.13
2.45
2.39
2.78
3.18
2.16
2.51
2.89
2.69
3.13
3.58
2.43
2.77
3.18
3.04
3.54
4.05
2.73
3.18
3.64
3.33
4.03
4.61
3.27
3.74
4.24
4.12
4.69
5.26
3.74
4.27
4.88
4.14
4.96
5.79
5.15
6.09
7.02
6.67
7.67
8.70
7.80
8.72
9.67
8.29
9.92
11.57
10.29
12.19
14.03
13.34
15.35
17.39
15.60
17.44
19.35
20
Qo
6 340
5 430
4 480
8 160
7 090
5 960
10 200
8 980
7 660
11 800
10 400
8 930
12 800
11 500
10 100
12 500
11 400
10 100
16 600
14 400
12 200
16 600
14 400
12 200
19 100
16 700
14 300
19 500
16 700
14 200
21 000
18 600
16 000
20 900
18 300
15 800
23 700
21 000
18 200
23 600
20 700
17 900
26 400
23 600
20 500
26 000
23 300
20 500
29 500
26 400
23 000
29 700
26 400
23 100
35 700
31 600
27 200
43 200
38 300
33 000
51 300
45 700
39 800
57 000
50 600
43 600
71 400
63 100
54 300
86 400
76 500
66 000
102 500
91 500
79 500
114 000
101 200
87 200
Pe
0.73
0.93
1.12
0.94
1.16
1.37
1.32
1.58
1.85
1.56
1.86
2.16
1.72
2.10
2.48
1.83
2.27
2.72
2.04
2.45
2.87
1.80
2.17
2.55
2.36
2.83
3.32
2.18
2.57
3.00
2.66
3.20
3.75
2.46
2.86
3.35
3.02
3.63
4.26
2.76
3.27
3.82
3.32
4.18
4.93
3.40
3.92
4.48
4.23
4.91
5.60
3.87
4.48
5.18
4.01
4.98
5.98
5.02
6.18
7.33
6.75
7.92
9.13
8.12
9.18
10.30
8.02
9.96
11.97
10.05
12.35
14.66
13.50
15.84
18.27
16.23
18.37
20.60
Voltage: 400 V / 3 / 50 Hz
d.o.o.
Legend:
To
Tc
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
R134a
G R U P A
MTZ250
PERFORMANCE DATA
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
147
MTZ
Model
MTZ018
MTZ022
MTZ028
MTZ032
MTZ036
MTZ040
MTZ044
MTZ045
MTZ050
MTZ051
MTZ056
MTZ057
MTZ064
MTZ065
MTZ072
MTZ073
MTZ080
MTZ081
MTZ100
MTZ125
MTZ144
MTZ160
MTZ200
MTZ288
MTZ320
-30
Qo
Pe
620
0.70
450
0.69
1 030
0.89
740
0.86
1 330
1.09
880
1.05
1 700
1.24
1 210
1.20
2 040
1.50
1 510
1.50
2 440
1.70
1 860
1.70
2 330
1.93
2.00
1 530
2 210
1.65
1 580
1.60
2 900
2.20
1 940
2.27
2 670
1.95
1 970
1.94
2 890
2.30
1 910
2.40
2 740
2.06
2 010
2.04
3 530
2.63
2 410
2.77
3 440
2.40
2 510
2.32
4 250
2.96
2 890
3.05
3 940
2.77
2 960
2.74
4 790
3.48
3 210
3.63
4 830
3.18
3 680
3.15
5 130
4.06
3 760
4.01
7 120
5.12
5 400
5.16
8 680
6.03
6 610
6.08
9 510
6.77
7 280
6.80
10 300
8.12
7 520
8.02
14 200 10.25
10 800 10.32
17 400 12.06
13 200 12.17
19 000 13.54
14 600 13.61
-
-25
Qo
Pe
980
0.82
750
0.83
540
0.84
1 510
1.03
1 130
1.03
790
1.00
1 980
1.30
1 440
1.30
950
1.26
2 420
1.46
1 830
1.46
1 270
1.41
2 860
1.73
2 230
1.78
1 590
1.78
3 360
1.98
2 670
2.05
1 960
2.08
3 200
2.20
2 270
2.29
1 660
2.27
3 160
1.92
2 420
1.94
1 660
1.89
3 920
2.50
2 820
2.61
2 070
2.59
3 780
2.24
2 890
2.29
2 100
2.28
4 170
2.67
3 050
2.81
2 170
2.84
3 940
2.39
3 020
2.43
2 190
2.42
4 980
3.03
3 700
3.21
2 670
3.25
4 820
2.82
3 690
2.83
2 610
2.74
5 830
3.39
4 300
3.52
3 110
3.58
5 490
3.21
4 240
3.25
3 160
3.27
6 670
3.98
4 910
4.17
3 470
4.25
6 620
3.75
5 230
3.85
3 910
3.85
7 290
4.68
5 690
4.80
3 930
4.65
9 820
5.85
7 640
6.02
5 740
6.12
11 800
6.84
9 300
7.05
6 920
7.12
13 000
7.71
10 200
7.95
7 670
8.06
14 600
9.35
11 400
9.60
7 850
9.31
19 600 11.70
15 300 12.05
11 500 12.25
23 600 13.68
18 600 14.11
13 800 14.25
25 900 15.42
20 500 15.90
15 300 16.12
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
-20
Qo
Pe
1 440
0.94
1 130
0.96
840
0.99
2 100
1.16
1 620
1.19
1 170
1.20
2 780
1.49
2 120
1.53
1 520
1.55
3 290
1.65
2 570
1.71
1 880
1.71
3 860
1.95
3 090
2.06
2 320
2.12
4 470
2.24
3 630
2.37
2 770
2.48
4 310
2.46
3 220
2.59
2 360
2.62
4 330
2.15
3 440
2.25
2 520
2.28
5 220
2.80
3 930
2.95
2 900
2.99
5 160
2.51
4 030
2.62
3 010
2.69
5 730
3.03
4 410
3.22
3 260
3.32
5 420
2.70
4 270
2.81
3 220
2.88
6 740
3.44
5 240
3.66
3 920
3.77
6 540
3.21
5 150
3.32
3 800
3.34
7 770
3.83
6 000
4.01
4 480
4.14
7 400
3.62
5 840
3.75
4 430
3.86
8 920
4.48
6 900
4.72
5 110
4.89
8 800
4.26
7 080
4.48
5 460
4.63
9 950
5.22
8 000
5.53
5 920
5.58
13 200
6.53
10 400
6.86
7 950
7.11
15 600
7.61
12 500
8.00
9 570
8.25
17 100
8.58
13 800
9.04
10 600
9.37
19 900 10.45
16 000 11.05
11 800 11.17
26 300 13.07
20 800 13.73
15 900 14.23
31 300 15.21
25 100 16.00
19 100 16.49
34 300 17.16
27 600 18.08
21 200 18.73
-15
Qo
Pe
2 010
1.05
1 600
1.09
1 210
1.14
2 850
1.27
2 240
1.34
1 650
1.39
3 730
1.66
2 940
1.75
2 190
1.82
4 350
1.83
3 470
1.94
2 610
2.01
5 060
2.16
4 120
2.33
3 170
2.45
5 770
2.48
4 760
2.67
3 710
2.86
5 710
2.70
4 400
2.88
3 270
2.98
5 740
2.37
4 660
2.52
3 540
2.64
6 850
3.08
5 310
3.29
3 960
3.41
6 850
2.75
5 440
2.93
4 140
3.07
7 620
3.37
6 040
3.62
4 550
3.81
7 250
2.99
5 790
3.17
4 460
3.33
8 860
3.82
7 090
4.11
5 400
4.30
8 640
3.57
6 930
3.78
5 260
3.90
10 100
4.26
8 020
4.50
6 110
4.73
9 740
4.01
7 790
4.23
6 010
4.43
11 600
4.97
9 250
5.29
7 030
5.54
11 400
4.73
9 300
5.07
7 300
5.35
13 200
5.70
10 700
6.18
8 230
6.44
17 200
7.17
13 800
7.67
10 700
8.09
20 200
8.32
16 400
8.91
12 700
9.35
22 100
9.40
18 100 10.08
14 100 10.63
26 300 11.41
21 500 12.36
16 500 12.88
34 500 14.34
27 600 15.34
21 300 16.18
40 500 16.64
32 900 17.82
25 500 18.70
44 300 18.81
36 200 20.15
28 200 21.26
-10
Qo
Pe
2 700
1.14
2 170
1.21
1 670
1.28
3 750
1.37
2 990
1.48
2 260
1.58
4 870
1.82
3 910
1.96
3 000
2.08
5 600
2.00
4 540
2.16
3 490
2.29
6 470
2.34
5 320
2.58
4 170
2.76
7 310
2.70
6 080
2.95
4 810
3.22
7 440
2.92
5 870
3.16
4 410
3.33
7 440
2.56
6 120
2.77
4 760
2.97
8 850
3.33
7 010
3.61
5 290
3.81
8 880
2.97
7 130
3.22
5 510
3.44
9 870
3.68
7 980
4.00
6 100
4.28
9 450
3.25
7 650
3.51
5 990
3.76
11 400
4.17
9 270
4.54
7 160
4.83
11 200
3.90
9 100
4.20
7 050
4.44
12 900
4.66
10 400
4.99
8 060
5.31
12 600
4.37
10 200
4.69
7 960
4.98
14 700
5.44
12 000
5.84
9 280
6.21
14 500
5.17
11 900
5.61
9 480
6.02
17 000
6.12
14 000
6.76
10 900
7.22
22 100
7.75
17 900
8.44
14 000
9.04
25 700
8.98
21 100
9.78
16 600 10.43
28 100 10.19
23 200 11.08
18 300 11.86
34 000 12.23
28 000 13.52
21 900 14.43
44 200 15.50
35 800 16.88
28 000 18.08
51 300 17.96
42 200 19.56
33 100 20.87
56 100 20.37
46 300 22.15
36 600 23.71
Qo: Cooling capacity in W
Pe: Power input in kW
-5
Qo
3 530
2 860
2 220
4 820
3 900
3 000
6 200
5 050
3 960
7 080
5 810
4 540
8 130
6 740
5 340
9 100
7 620
6 080
9 550
7 670
5 830
9 450
7 860
6 220
11 300
9 090
6 930
11 300
9 170
7 170
12 500
10 300
7 940
12 100
9 900
7 830
14 400
11 800
9 240
14 200
11 700
9 210
16 100
13 300
10 400
15 900
13 000
10 300
18 400
15 200
11 900
18 100
15 000
12 100
21 500
17 800
14 100
27 900
22 800
18 100
32 100
26 600
21 100
35 000
29 100
23 300
43 100
35 700
28 200
55 800
45 600
36 100
64 100
53 100
42 200
70 000
58 300
46 600
0
Pe
1.21
1.31
1.40
1.45
1.61
1.75
1.95
2.14
2.32
2.14
2.36
2.56
2.51
2.81
3.07
2.90
3.20
3.55
3.11
3.42
3.68
2.73
3.00
3.26
3.54
3.90
4.21
3.16
3.48
3.78
3.94
4.35
4.74
3.49
3.83
4.17
4.48
4.94
5.35
4.20
4.60
4.95
5.02
5.45
5.90
4.70
5.11
5.51
5.87
6.38
6.87
5.57
6.11
6.64
6.46
7.26
7.92
8.27
9.16
9.96
9.57
10.60
11.48
10.94
12.05
13.06
12.92
14.53
15.83
16.53
18.32
19.92
19.14
21.20
22.97
21.88
24.10
26.12
Superheat = 11.1 K
Subcooling = 8.3 K
Qo
4 510
3 680
2 880
6 090
4 990
3 900
7 740
6 390
5 090
8 790
7 290
5 790
10 000
8 380
6 710
11 200
9 390
7 560
12 100
9 840
7 580
11 800
9 900
7 940
14 200
11 600
8 930
14 100
11 600
9 150
15 600
12 900
10 100
15 200
12 500
10 000
17 800
14 800
11 700
17 800
14 800
11 800
20 000
16 600
13 100
19 800
16 400
13 100
22 600
18 800
14 900
22 300
18 700
15 100
26 800
22 300
17 800
34 700
28 600
22 900
39 500
33 000
26 500
43 100
36 100
29 200
53 600
44 600
35 600
69 300
57 200
45 800
79 000
65 900
52 900
86 200
72 300
58 400
Pe
1.27
1.40
1.52
1.52
1.72
1.92
2.06
2.31
2.54
2.26
2.55
2.81
2.64
3.01
3.35
3.07
3.44
3.86
3.25
3.64
4.00
2.88
3.20
3.53
3.70
4.15
4.57
3.32
3.71
4.09
4.14
4.66
5.17
3.69
4.11
4.55
4.73
5.30
5.83
4.45
4.96
5.42
5.34
5.88
6.46
4.98
5.51
6.01
6.25
6.88
7.51
5.94
6.57
7.21
6.74
7.70
8.54
8.71
9.83
10.85
10.09
11.36
12.49
11.68
13.01
14.25
13.47
15.39
17.08
17.43
19.66
21.69
20.17
22.72
24.99
23.36
26.03
28.50
5
Qo
5 650
4 650
3 670
7 570
6 260
4 970
9 520
7 950
6 420
10 800
9 010
7 250
12 300
10 300
8 290
13 500
11 400
9 280
15 100
12 400
9 700
14 600
12 300
9 980
17 600
14 500
11 300
17 500
14 400
11 500
19 200
16 000
12 600
18 800
15 600
12 700
21 800
18 300
14 500
22 000
18 400
14 900
24 400
20 400
16 300
24 300
20 300
16 500
27 400
23 000
18 400
27 200
22 900
18 700
32 900
27 500
22 100
42 500
35 300
28 600
48 100
40 400
32 700
52 400
44 200
36 100
65 900
55 000
44 300
84 900
70 700
57 100
96 100
80 800
65 500
104 800
88 400
72 100
Pe
1.31
1.47
1.63
1.57
1.82
2.07
2.14
2.45
2.75
2.37
2.71
3.04
2.74
3.19
3.61
3.23
3.65
4.14
3.35
3.83
4.29
3.01
3.38
3.77
3.79
4.36
4.91
3.45
3.91
4.37
4.27
4.90
5.55
3.86
4.36
4.90
4.92
5.61
6.28
4.67
5.28
5.85
5.59
6.26
6.99
5.23
5.87
6.49
6.57
7.34
8.13
6.29
7.01
7.75
6.94
8.06
9.08
9.09
10.44
11.69
10.52
12.06
13.46
12.42
13.97
15.45
13.88
16.11
18.16
18.17
20.88
23.37
21.04
24.12
26.91
24.84
27.95
30.89
10
Qo
Pe
6 970
1.33
5 770
1.53
4 600
1.72
9 270
1.60
7 740
1.90
6 220
2.20
11 600
2.20
9 730
2.56
7 960
2.93
13 000
2.44
11 000
2.86
8 940
3.26
14 800
2.81
12 400
3.34
10 100
3.85
16 200
3.36
13 800
3.84
11 200
4.40
18 600
3.38
15 500
3.96
12 200
4.54
17 700
3.12
15 100
3.54
12 300
3.99
21 600
3.81
18 000
4.50
14 200
5.19
21 300
3.54
17 700
4.07
14 200
4.62
23 300
4.32
19 600
5.08
15 600
5.87
23 000
3.98
19 200
4.57
15 700
5.21
26 300
5.02
22 200
5.84
17 800
6.68
26 800
4.84
22 700
5.55
18 600
6.25
29 400
5.78
24 800
6.59
19 900
7.48
29 500
5.43
24 800
6.19
20 300
6.94
32 800
6.81
27 800
7.73
22 400
8.70
32 700
6.62
27 700
7.41
22 800
8.25
40 000
7.08
33 500
8.34
27 100
9.54
51 400
9.37
43 100 10.98
35 200 12.48
57 800 10.87
48 900 12.69
40 000 14.36
63 000 13.16
53 500 14.95
44 000 16.66
79 900 14.15
67 000 16.68
54 200 19.08
102 900 18.75
86 300 21.96
70 500 24.95
115 600 21.73
97 800 25.37
80 000 28.72
126 000 26.33
107 000 29.90
88 100 33.31
Voltage: 400 V / 3 / 50 Hz
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
148
d.o.o.
Legend:
To
Tc
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
R404A / R507A
G R U P A
MTZ250
PERFORMANCE DATA
MTZ
Model
MTZ018
MTZ022
MTZ028
MTZ032
MTZ036
MTZ040
MTZ044
MTZ045
MTZ050
MTZ051
MTZ056
MTZ057
MTZ064
MTZ065
MTZ072
MTZ073
MTZ080
MTZ081
MTZ100
MTZ125
MTZ144
MTZ160
MTZ200
MTZ288
MTZ320
-15
Qo
1 560
1 180
2 250
1 770
2 740
2 160
3 380
2 710
3 980
3 270
4 620
3 890
4 340
3 390
4 500
3 570
4 940
3 880
5 230
4 200
5 650
4 460
5 640
4 540
6 340
5 020
6 800
5 550
7 330
5 850
7 680
6 300
8 510
6 850
8 770
7 290
9 910
7 870
14 100
11 500
15 400
12 700
18 300
15 400
19 800
15 700
28 100
23 000
30 800
25 300
36 700
30 700
-
-10
Pe
0.79
0.82
1.04
1.07
1.26
1.30
1.45
1.50
1.72
1.81
2.04
2.18
2.06
2.21
1.92
1.97
2.28
2.42
2.24
2.34
2.54
2.67
2.40
2.50
2.80
2.91
2.78
2.91
3.16
3.30
3.31
3.49
3.60
3.76
3.84
4.08
4.58
4.81
5.76
6.13
6.61
7.07
7.64
8.21
9.16
9.61
11.52
12.26
13.22
14.13
15.28
16.43
-
Qo
2 210
1 750
3 060
2 490
3 790
3 110
4 530
3 740
5 230
4 400
6 010
5 150
5 880
4 770
6 090
4 920
6 690
5 450
6 990
5 780
7 670
6 260
7 620
6 310
8 620
7 060
9 000
7 480
9 850
8 110
10 200
8 540
11 300
9 380
11 600
9 860
13 500
11 000
18 400
15 500
20 200
17 000
23 700
20 200
27 000
22 000
36 900
30 900
40 500
34 000
47 400
40 300
-
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
-5
Pe
0.88
0.94
1.16
1.24
1.42
1.52
1.61
1.75
1.93
2.10
2.25
2.48
2.27
2.47
2.13
2.28
2.54
2.74
2.48
2.70
2.87
3.05
2.68
2.90
3.19
3.36
3.08
3.35
3.61
3.81
3.66
3.96
4.11
4.35
4.23
4.64
5.04
5.47
6.33
6.97
7.26
7.92
8.36
9.20
10.07
10.94
12.66
13.93
14.51
15.83
16.71
18.39
-
Qo
3 000
2 430
1 930
4 010
3 330
2 660
5 030
4 220
3 390
5 870
4 940
4 000
6 690
5 710
4 700
7 640
6 610
5 530
7 740
6 420
5 080
8 040
6 590
5 250
8 800
7 330
5 840
9 120
7 650
6 180
10 100
8 420
6 760
10 000
8 440
6 840
11 300
9 490
7 660
11 700
9 820
8 030
12 800
10 800
8 770
13 200
11 200
9 220
14 600
12 400
10 100
15 000
12 900
10 700
17 800
14 800
11 900
23 600
20 100
16 500
26 000
22 200
18 300
30 100
25 800
21 600
35 500
29 600
23 700
47 200
40 200
33 000
52 000
44 400
36 600
60 100
51 700
43 100
0
Pe
0.95
1.04
1.11
1.25
1.39
1.48
1.56
1.72
1.83
1.75
1.95
2.10
2.11
2.36
2.56
2.44
2.74
3.00
2.45
2.72
2.91
2.31
2.54
2.69
2.78
3.04
3.24
2.68
3.00
3.22
3.17
3.43
3.65
2.91
3.24
3.47
3.56
3.80
4.04
3.34
3.73
4.02
4.03
4.32
4.58
3.96
4.39
4.70
4.60
4.93
5.23
4.57
5.12
5.55
5.41
6.04
6.49
6.81
7.69
8.34
7.82
8.70
9.46
9.01
10.09
10.96
10.82
12.08
12.97
13.61
15.37
16.67
15.64
17.41
18.91
18.03
20.17
21.93
Qo
3 920
3 240
2 620
5 130
4 320
3 510
6 480
5 520
4 520
7 450
6 330
5 210
8 400
7 200
6 020
9 540
8 290
7 020
9 940
8 390
6 760
10 400
8 610
6 940
11 300
9 570
7 750
11 600
9 860
8 090
13 000
11 000
8 940
12 900
11 000
9 040
14 600
12 400
10 100
14 800
12 600
10 400
16 400
13 900
11 500
16 800
14 400
12 000
18 500
15 800
13 100
18 900
16 400
13 800
22 800
19 300
15 700
29 700
25 600
21 300
32 800
28 200
23 600
37 600
32 500
27 400
45 600
38 600
31 400
59 400
51 100
42 600
65 600
56 500
47 200
75 100
65 100
54 800
Qo: Cooling capacity in W
Pe: Power input in kW
5
Pe
1.00
1.13
1.24
1.32
1.50
1.66
1.66
1.89
2.08
1.86
2.12
2.36
2.25
2.57
2.87
2.61
2.98
3.33
2.59
2.94
3.23
2.44
2.76
3.01
2.98
3.32
3.63
2.85
3.24
3.60
3.44
3.78
4.10
3.11
3.53
3.89
3.89
4.22
4.57
3.56
4.05
4.48
4.41
4.80
5.18
4.22
4.77
5.23
5.04
5.48
5.92
4.84
5.54
6.14
5.72
6.52
7.19
7.21
8.31
9.26
8.29
9.42
10.41
9.63
10.91
12.08
11.44
13.03
14.39
14.42
16.61
18.52
16.58
18.83
20.82
19.26
21.81
24.16
Qo
5 010
4 180
3 420
6 430
5 460
4 500
8 180
7 030
5 840
9 280
7 940
6 600
10 400
8 920
7 510
11 700
10 200
8 710
12 500
10 700
8 750
13 100
11 000
8 990
14 300
12 200
10 000
14 600
12 500
10 300
16 300
14 000
11 500
16 200
13 900
11 600
18 400
15 700
13 000
18 500
15 900
13 300
20 500
17 600
14 600
21 000
18 200
15 300
23 000
19 900
16 600
23 500
20 600
17 400
28 800
24 500
20 300
36 800
31 900
26 900
40 700
35 300
29 800
46 400
40 300
34 200
57 500
49 100
40 500
73 600
63 800
53 700
81 400
70 600
59 600
92 700
80 700
68 400
10
Pe
1.05
1.20
1.34
1.37
1.60
1.81
1.73
2.03
2.29
1.94
2.27
2.59
2.35
2.73
3.13
2.75
3.18
3.62
2.69
3.14
3.53
2.56
2.94
3.29
3.13
3.57
3.99
2.99
3.45
3.91
3.66
4.10
4.54
3.28
3.77
4.26
4.18
4.61
5.07
3.76
4.32
4.89
4.74
5.25
5.76
4.43
5.11
5.71
5.42
6.00
6.59
5.06
5.89
6.66
5.97
6.92
7.81
7.55
8.84
10.08
8.66
10.04
11.30
10.23
11.68
13.11
11.95
13.84
15.62
15.10
17.68
20.15
17.31
20.09
22.60
20.45
23.36
26.22
Superheat = 11.1 K
Subcooling = 8.3 K
Qo
6 270
5 270
4 350
7 940
6 790
5 640
10 100
8 770
7 360
11 400
9 800
8 200
12 600
10 900
9 190
14 300
12 400
10 600
15 500
13 400
11 100
16 300
13 800
11 400
17 700
15 300
12 700
18 100
15 500
13 000
20 200
17 500
14 500
20 100
17 400
14 700
22 700
19 600
16 400
22 900
19 800
16 700
25 200
21 900
18 300
25 900
22 600
19 200
28 200
24 500
20 600
28 900
25 300
21 600
35 700
30 700
25 600
45 000
39 300
33 300
49 800
43 500
37 000
56 600
49 400
42 200
71 300
61 400
51 200
90 100
78 500
66 600
99 600
87 000
74 000
113 100
98 800
84 300
15
Pe
1.08
1.25
1.44
1.41
1.67
1.94
1.78
2.13
2.48
2.01
2.38
2.78
2.43
2.86
3.35
2.85
3.35
3.88
2.73
3.28
3.81
2.65
3.10
3.53
3.23
3.78
4.33
3.10
3.61
4.18
3.83
4.38
4.94
3.43
3.98
4.56
4.41
4.96
5.55
3.94
4.57
5.25
5.01
5.64
6.31
4.58
5.39
6.15
5.73
6.46
7.22
5.24
6.19
7.12
6.18
7.26
8.34
7.83
9.30
10.79
8.91
10.58
12.11
10.82
12.42
14.09
12.37
14.53
16.69
15.67
18.59
21.58
17.82
21.16
24.22
21.65
24.85
28.18
Qo
7 720
6 530
5 430
9 660
8 310
6 960
12 400
10 800
9 110
13 800
11 900
10 000
15 200
13 100
11 100
17 200
15 000
12 800
19 000
16 500
13 800
20 100
17 100
14 300
21 600
18 800
15 700
22 100
19 000
16 000
24 700
21 500
18 000
24 600
21 400
18 200
27 800
24 100
20 300
27 900
24 300
20 700
30 600
26 700
22 500
31 500
27 700
23 700
34 100
29 800
25 300
35 000
30 800
26 500
43 600
37 800
31 800
54 400
47 700
40 700
60 300
52 900
45 300
68 300
59 900
51 300
87 200
75 500
63 600
108 900
95 400
81 500
120 600
105 900
90 700
136 600
119 700
102 700
Pe
1.11
1.30
1.52
1.43
1.73
2.05
1.79
2.21
2.63
2.07
2.48
2.94
2.47
2.95
3.51
2.93
3.48
4.10
2.71
3.38
4.04
2.73
3.24
3.75
3.26
3.94
4.62
3.19
3.75
4.39
3.93
4.60
5.31
3.56
4.16
4.83
4.58
5.25
5.99
4.12
4.79
5.56
5.21
5.98
6.81
4.69
5.63
6.53
5.96
6.85
7.80
5.38
6.45
7.53
6.37
7.56
8.81
8.08
9.69
11.42
9.05
11.01
12.84
11.45
13.16
15.03
12.73
15.11
17.62
16.16
19.38
22.84
18.09
22.02
25.68
22.90
26.32
30.07
Voltage: 400 V / 3 / 50 Hz
d.o.o.
Legend:
To
Tc
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
R407C
G R U P A
MTZ250
PERFORMANCE DATA
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
149
MT
PERFORMANCE DATA
Model
MT018
MT022
MT028
MT032
MT036
MT040
MT044
MT045
MT050
MT051
MT056
MT057
MT064
MT065
MT072
MT073
MT080
MT081
MT100
MT125
MT144
MT160
MTM200
MTM288
MTM320
-20
Qo
Pe
1 120
0.72
890
0.76
1 710
0.90
1 280
0.95
2 710
1.38
2 190
1.43
2 900
1.61
2 310
1.68
3 580
1.78
2 890
1.90
3 880
1.91
3 080
2.08
3 850
1.94
3 240
2.13
3 400
1.87
2 760
1.97
4 340
2.08
3 530
2.31
4 100
2.20
3 300
2.31
4 860
2.45
3 990
2.64
4 470
2.38
3 770
2.55
5 470
2.74
4 500
3.02
5 560
2.70
4 580
2.85
6 080
3.14
5 070
3.47
6 060
3.06
4 950
3.20
6 930
3.52
5 780
3.91
7 390
3.64
6 180
3.89
8 580
4.49
6 650
4.66
11 300
5.69
9 360
6.17
13 000
6.41
10 700
6.94
14 400
7.21
11 900
7.79
17 200
8.99
13 300
9.32
22 700 11.38
18 700 12.35
26 000 12.81
21 300 13.87
28 800 14.42
23 800 15.58
-
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
-15
Qo
Pe
1 590
0.82
1 300
0.88
1 030
0.93
2 410
1.05
1 920
1.12
1 430
1.15
3 610
1.55
3 030
1.63
2 420
1.67
3 860
1.80
3 190
1.90
2 610
1.99
4 710
1.97
3 950
2.13
3 160
2.28
5 090
2.17
4 260
2.39
3 410
2.53
5 080
2.20
4 340
2.44
3 630
2.58
4 690
2.06
3 850
2.22
3 120
2.31
5 670
2.37
4 740
2.63
3 810
2.83
5 650
2.45
4 660
2.65
3 720
2.75
6 540
2.79
5 530
3.05
4 530
3.24
6 110
2.63
5 170
2.88
4 380
3.08
7 330
3.13
6 190
3.46
5 240
3.69
7 460
3.01
6 290
3.27
5 130
3.41
8 150
3.51
6 950
3.88
6 010
4.33
8 270
3.45
6 960
3.72
5 620
3.87
9 290
3.94
7 930
4.38
6 810
4.90
9 900
4.03
8 450
4.41
6 990
4.69
11 400
4.98
9 150
5.25
7 400
5.49
14 900
6.28
12 500
6.87
10 400
7.32
17 000
7.06
14 200
7.71
11 700
8.20
18 800
7.93
15 800
8.65
13 100
9.19
22 700
9.96
18 300 10.49
14 800 10.98
29 800 12.55
25 100 13.74
20 800 14.63
34 000 14.12
28 500 15.42
23 500 16.40
37 600 15.87
31 700 17.30
26 300 18.38
-10
Qo
Pe
2 180
0.92
1 810
1.00
1 450
1.07
3 230
1.19
2 670
1.29
2 090
1.35
4 640
1.69
4 000
1.81
3 300
1.91
4 990
1.97
4 230
2.11
3 530
2.25
5 990
2.16
5 150
2.35
4 260
2.55
6 470
2.40
5 590
2.67
4 690
2.89
6 580
2.43
5 680
2.72
4 780
2.94
6 290
2.24
5 210
2.46
4 240
2.62
7 310
2.65
6 230
2.95
5 120
3.20
7 490
2.65
6 290
2.94
5 120
3.15
8 500
3.10
7 320
3.44
6 120
3.73
8 120
2.86
6 910
3.18
5 820
3.46
9 530
3.48
8 190
3.89
6 990
4.20
9 700
3.28
8 310
3.64
6 900
3.91
10 600
3.87
9 130
4.29
7 910
4.80
10 900
3.79
9 340
4.19
7 760
4.49
12 000
4.35
10 400
4.84
8 990
5.43
12 800
4.39
11 100
4.89
9 350
5.32
14 700
5.41
12 100
5.79
10 000
6.17
19 200
6.82
16 400
7.55
13 700
8.15
21 800
7.66
18 500
8.47
15 400
9.14
24 100
8.61
20 600
9.49
17 200 10.23
29 300 10.81
24 300 11.58
20 000 12.35
38 300 13.64
32 700 15.09
27 300 16.31
43 600 15.33
37 000 16.93
30 700 18.27
48 100 17.21
41 100 18.98
34 400 20.47
-5
Qo
2 900
2 450
1 970
4 190
3 540
2 860
5 810
5 090
4 300
6 310
5 440
4 610
7 430
6 500
5 500
8 030
7 090
6 130
8 390
7 310
6 190
8 200
6 880
5 640
9 290
8 050
6 740
9 650
8 210
6 780
10 800
9 380
7 950
10 500
9 020
7 600
12 100
10 500
9 050
12 300
10 700
8 980
13 400
11 700
10 100
13 900
12 100
10 200
15 200
13 300
11 500
16 200
14 200
12 100
18 600
15 700
13 100
24 200
20 800
17 500
27 500
23 600
19 700
30 300
26 200
22 000
37 200
31 400
26 200
48 300
41 700
35 100
55 000
47 200
39 400
60 600
52 300
44 000
Qo: Cooling capacity in W
Pe: Power input in kW
0
Pe
1.00
1.10
1.20
1.31
1.44
1.53
1.80
1.98
2.14
2.11
2.31
2.50
2.32
2.56
2.81
2.59
2.93
3.22
2.62
2.98
3.27
2.40
2.68
2.91
2.91
3.25
3.55
2.82
3.20
3.51
3.34
3.78
4.19
3.07
3.46
3.82
3.79
4.28
4.69
3.52
3.98
4.37
4.22
4.69
5.27
4.08
4.60
5.05
4.75
5.30
5.96
4.72
5.33
5.90
5.75
6.27
6.82
7.31
8.18
8.97
8.20
9.17
10.05
9.20
10.28
11.26
11.50
12.54
13.63
14.61
16.36
17.94
16.40
18.35
20.10
18.41
20.57
22.51
Qo
3 780
3 220
2 630
5 300
4 560
3 760
7 140
6 330
5 430
7 820
6 830
5 860
9 060
8 020
6 890
9 780
8 780
7 740
10 500
9 250
7 890
10 500
8 880
7 350
11 700
10 200
8 700
12 200
10 500
8 730
13 300
11 700
10 100
13 400
11 500
9 800
15 100
13 300
11 500
15 400
13 400
11 400
16 600
14 600
12 600
17 500
15 300
13 100
18 900
16 600
14 400
20 000
17 700
15 200
23 200
19 900
16 800
30 000
26 100
22 100
34 200
29 600
24 900
37 700
32 800
27 800
46 400
39 700
33 500
60 100
52 200
44 200
68 400
59 200
49 800
75 300
65 600
55 500
5
Pe
1.07
1.19
1.32
1.40
1.56
1.70
1.87
2.11
2.34
2.22
2.47
2.73
2.46
2.76
3.06
2.74
3.15
3.53
2.75
3.19
3.57
2.54
2.88
3.19
3.14
3.54
3.90
2.97
3.42
3.82
3.52
4.07
4.60
3.26
3.72
4.16
4.04
4.62
5.15
3.71
4.27
4.78
4.54
5.08
5.73
4.34
4.96
5.54
5.12
5.74
6.48
5.01
5.72
6.44
5.99
6.66
7.39
7.70
8.75
9.74
8.65
9.81
10.92
9.70
11.00
12.23
11.98
13.32
14.78
15.41
17.51
19.49
17.29
19.63
21.83
19.40
22.00
24.46
Superheat = 11.1 K
Subcooling = 8.3 K
Qo
4 820
4 150
3 430
6 570
5 720
4 800
8 640
7 720
6 700
9 560
8 420
7 300
10 900
9 710
8 450
11 700
10 700
9 550
13 100
11 600
9 920
13 100
11 200
9 390
14 500
12 800
11 000
15 100
13 000
11 000
16 300
14 400
12 500
16 700
14 500
12 300
18 600
16 500
14 300
18 900
16 600
14 200
20 200
17 900
15 600
21 600
19 000
16 400
23 100
20 400
17 800
24 500
21 700
18 800
28 600
24 700
21 100
36 800
32 200
27 500
42 000
36 600
31 000
46 200
40 500
34 500
57 200
49 500
42 100
73 700
64 500
55 000
84 000
73 200
62 000
92 500
81 000
69 100
Pe
1.11
1.26
1.42
1.46
1.66
1.85
1.90
2.20
2.51
2.29
2.60
2.93
2.58
2.93
3.30
2.82
3.32
3.79
2.82
3.34
3.82
2.66
3.07
3.45
3.34
3.79
4.21
3.09
3.61
4.10
3.61
4.28
4.95
3.43
3.96
4.48
4.21
4.91
5.55
3.88
4.53
5.16
4.82
5.44
6.17
4.56
5.27
5.98
5.45
6.14
6.97
5.28
6.09
6.93
6.10
6.94
7.87
8.00
9.24
10.45
8.97
10.36
11.72
10.07
11.61
13.13
12.19
13.89
15.74
16.00
18.49
20.91
17.95
20.72
23.43
20.13
23.23
26.26
10
Qo
Pe
6 050
1.13
5 260
1.31
4 390
1.50
8 010
1.49
7 040
1.73
5 990
1.96
10 300
1.88
9 280
2.25
8 130
2.64
11 500
2.32
10 200
2.69
8 940
3.09
12 900
2.65
11 600
3.07
10 200
3.51
13 900
2.83
12 800
3.42
11 600
4.00
16 000
2.82
14 200
3.43
12 300
4.02
16 200
2.76
14 000
3.23
11 800
3.69
17 800
3.48
15 900
4.00
13 800
4.50
18 400
3.19
16 000
3.77
13 600
4.35
19 600
3.59
17 500
4.40
15 200
5.23
20 500
3.57
17 900
4.18
15 400
4.78
22 600
4.30
20 100
5.11
17 600
5.88
22 800
4.00
20 200
4.76
17 400
5.50
24 400
5.06
21 600
5.76
18 900
6.59
26 300
4.75
23 300
5.54
20 200
6.37
27 800
5.73
24 700
6.51
21 600
7.44
29 500
5.53
26 300
6.42
22 900
7.38
34 700
6.05
30 400
7.09
26 100
8.24
44 600
8.17
39 300
9.63
33 700 11.08
51 000
9.16
44 700 10.80
38 100 12.43
56 100 10.28
49 500 12.10
42 500 13.93
69 500 12.11
60 700 14.19
52 100 16.48
89 300 16.34
78 600 19.25
67 400 22.16
102 000 18.33
89 400 21.59
76 200 24.85
112 200 20.56
98 900 24.20
84 900 27.85
15
Qo
Pe
7 490
1.12
6 550
1.33
5 530
1.56
9 650
1.47
8 550
1.76
7 340
2.04
12 200
1.79
11 000
2.24
9 730
2.72
13 800
2.29
12 300
2.74
10 800
3.22
15 100
2.69
13 700
3.17
12 100
3.70
16 300
2.76
15 100
3.45
13 800
4.14
19 500
2.72
17 400
3.44
15 100
4.14
19 700
2.83
17 100
3.38
14 600
3.91
21 600
3.57
19 400
4.16
17 100
4.74
22 100
3.28
19 400
3.92
16 600
4.58
23 300
3.46
20 900
4.42
18 300
5.41
24 900
3.70
21 900
4.38
18 900
5.07
27 100
4.28
24 300
5.22
21 300
6.14
27 400
4.10
24 300
4.94
21 100
5.80
29 100
5.25
25 900
6.03
22 700
6.96
31 600
4.92
28 100
5.78
24 500
6.71
33 100
5.95
29 500
6.83
25 900
7.86
35 200
5.76
31 500
6.72
27 500
7.80
41 800
5.83
36 800
7.08
31 900
8.47
53 500
8.19
47 400
9.88
40 900 11.60
61 300
9.19
54 000 11.09
46 300 13.02
67 400 10.32
59 800 12.44
51 600 14.60
83 600 11.67
73 600 14.17
63 700 16.93
107 100 16.38
94 800 19.77
81 800 23.21
122 500 18.38
108 000 22.18
92 600 26.04
134 800 20.63
119 500 24.88
103 200 29.20
Voltage: 400 V / 3 / 50 Hz
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
150
d.o.o.
Legend:
-25
Qo
Pe
750
0.61
570
0.64
1 120
0.74
740
0.77
1 930
1.21
1 460
1.22
2 080
1.41
1 550
1.46
2 600
1.58
1 960
1.68
2 810
1.64
2 050
1.77
2 850
1.66
1.82
2 350
2 380
1.65
1 920
1.70
3 280
1.79
2 560
1.99
2 820
1.92
2 170
1.93
3 430
2.08
2 660
2.21
3 160
2.09
2 680
2.20
3 910
2.34
3 090
2.57
3 980
2.36
3 140
2.40
4 310
2.77
3 470
3.07
4 220
2.61
3 240
2.61
4 920
3.10
3 950
3.46
5 290
3.20
4 230
3.32
6 280
3.97
4 570
4.06
8 380
5.08
6 690
5.48
9 660
5.73
7 700
6.16
10 800
6.46
8 660
6.93
12 600
7.95
9 140
8.12
16 800 10.16
13 400 10.95
19 300 11.46
15 400 12.32
21 500 12.92
17 300 13.86
-
G R U P A
MTM250
To
Tc
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
R22
NTZ
PERFORMANCE DATA
Model
NTZ048
NTZ068
NTZ096
NTZ108
NTZ136
NTZ215
NTZ271
NTZ430
NTZ542
Legend:
To
Tc
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
35
45
55
-45
-40
Qo
370
190
790
520
-
Pe
0.46
0.35
1.04
1.02
-
1070
1 500
2 220
1 190
3 240
2 120
4 430
2 370
6 480
4 240
-
1.32
1.84
2.65
2.31
3.75
3.57
5.30
4.61
7.50
7.14
-
Qo
660
420
1220
870
1 400
910
1700
1120
2 260
1 570
3 450
2 240
4 850
3 470
6 910
4 480
9 690
6 940
-
-35
Pe
0.67
0.59
1.26
1.28
1.43
1.29
1.71
1.57
2.38
2.27
3.40
3.17
4.64
4.61
6.80
6.33
9.28
9.21
-
Qo
1 140
710
430
1980
1290
900
2 310
1 420
820
2820
1770
1080
3 640
2 360
1 540
5 640
3 540
2 050
7 750
5 140
3 390
11 270
7 080
4 090
15 500
10 290
6 780
-30
Pe
0.89
0.84
0.73
1.48
1.54
1.58
1.77
1.67
1.50
2.10
2.03
1.85
2.91
2.86
2.80
4.15
4.08
3.70
5.54
5.66
5.58
8.31
8.15
7.41
11.08
11.32
11.15
Qo
1 610
1 240
700
2670
2110
1300
3 190
2 430
1 320
3880
3010
1710
4 920
3 890
2 300
7 620
5 970
3 300
10 380
8 380
4 980
15 250
11 930
6 590
20 760
16 760
9 960
To: Evaporating temperature in °C
Qo: Cooling capacity in W
Tc: Condensing temperature in °C
Pe: Power input in kW
NTZ series are drop-in replacement for LTZ series
R404A / R507A
-25
Pe
1.10
1.09
1.01
1.71
1.81
1.90
2.12
2.09
1.95
2.47
2.49
2.39
3.43
3.47
3.47
4.90
5.01
4.81
6.44
6.73
6.82
9.79
10.02
9.61
12.89
13.46
13.64
Qo
2 160
1 700
1 030
3480
2785
1790
4 290
3 360
1 980
5150
4080
2480
6 450
5 200
3 250
9 970
8 030
4 830
13 500
11 050
6 940
19 930
16 060
9 660
27 000
22 110
13 890
-20
Pe
1.30
1.34
1.30
1.94
2.09
2.23
2.47
2.53
2.46
2.84
2.95
2.94
3.92
4.08
4.17
5.60
5.94
5.95
7.35
7.81
8.09
11.19
11.89
11.89
14.70
15.62
16.18
Qo
2 800
2 240
1 660
4430
3570
2800
5 620
4 510
3 320
6650
5340
4010
8 270
6 750
5 200
12 700
10 440
7 860
17 170
14 190
10 950
25 400
20 880
15 720
34 330
28 380
21 900
Superheat = 10K
Subcooling = 0 K
-15
Pe
1.49
1.57
1.59
2.18
2.38
2.57
2.81
2.99
3.02
3.20
3.40
3.49
4.39
4.69
4.90
6.24
6.86
7.11
8.25
8.90
9.38
12.47
13.71
14.21
16.51
17.80
18.76
Qo
3 550
2 860
2 160
5520
4490
3540
7 220
5 900
4 480
8410
680
5200
10 410
8 570
6 710
15 860
13 220
10 210
21 420
17 840
13 940
31 730
26 450
20 430
42 840
35 670
27 880
-10
Pe
1.64
1.79
1.87
2.43
2.68
2.93
3.15
3.47
3.61
3.55
3.85
4.04
4.82
5.29
5.64
6.79
7.72
8.26
9.16
10.00
10.69
13.58
15.44
16.52
18.31
19.99
21.38
Qo
4 400
3 570
2 720
6780
5540
4390
9 100
7 550
5 870
10440
8530
65808
12 880
10 710
8 490
19 490
16 420
12 930
26 320
22 040
17 410
38 970
32 840
25 860
52 630
44 080
34 810
Pe
1.76
1.99
2.13
2.70
2.99
3.30
3.48
3.97
4.25
3.88
4.29
4.60
5.21
5.87
6.40
7.23
8.52
9.38
10.05
11.10
12.02
14.47
17.04
18.77
20.10
22.20
24.03
Suction temp. = 20°C
Subcooling = 0 K
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Reciprocating Compressors
151
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
152
Scroll compressors
Scroll compressors perfectly suit applications like:
·
·
·
·
·
·
Water chillers
Self-contained air conditioning units
Split systems
Central air handling units
Heat pumps
Residential air conditioning
The complete solution for air-conditioning applications
Designed for excellence in performance, silence and endurance,
Danfoss Scroll Compressors are the quietest, most reliable and
longest-lasting compressors you can get. Available in a full range
of capacities from 2,5 to 30 hp, they provide the perfect fit for any
application, from light commercial to large commercial applications, and help you handle even the toughest challenges in the
HVAC&R industry.
There is no contact between the scroll flanks in a Performer scroll
compressor. The ultra-precise scroll profiles, with controlled orbit,
roll and slide on an oil film without friction or wear. Floating tip
seals ensure axial sealing with low friction losses. With these
techniques, built into an optimised upper shell design, the Scroll
compressor combines high energy efficiency with low sound and
vibration characteristics.
Danfoss Scroll Compressors are available in a large variety of single
and tandem models for R407C, R134a, R410A and R22 refrigerants.
Product advantages
Customer benefits
· Simple, lightweight and compact construction for easy
assembly
· Easy to install and service
· Lowest sound level in HVAC&R industry
· Low energy consumption
· Optimised for easy integration and servicing in existing
systems
· Long lifetime
· Minimised friction and wear
· High thermal working conditions
· Optimised upper shell design
· Constant performance
· Silent operation
· Low running costs
· 100% suction gas cooled and shielded motor
· Large oil reserve
· Large internal free volume
· Large refrigerant charge capacity
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
153
Dimensions
R22
HRM032
HRM034
HRM040
HRM042
R407C
HRP038
HRP040
HRP042
R410A
HRH031
HRH032
HRH034
HRH036
HRM045
HRM047
HRM048
HRM051
HRM054
HRM058
HRM060
HLM068
HLM072
HLM075
HLM078
HLM081
HRP045
HRP047
HRP048
HRP051
HRP054
HRP058
HRP060
HLP068
HLP072
HLP075
HLP081
HRH038
HRH040
HRH041
HRH044
HRH049
HRH051
HRH054
HRH056
HLH068
HLJ072
HLJ083
D
H
H1
H2
165
420
257
386
165
446
282
412
D
D
H
H2 H
H2
H1
H1
184
462
287
P6
C6
429
239
190.5
All dimensions in mm
R22
HCM094
HCM109
HCM120
R407C
HCP094
HCP109
HCP120
D
184
H
539
H1
372
H2
512
184
548
372
522
D
232
190.5
All dimensions in mm
H2
H
H1
C6
Please check with Danfoss for availability of C6 / P6 and other features.
Application:
H: high temperature / air conditioning
Family:
C: light commercial scroll
R: residential scroll (new platform)
L: light commercial scroll (new platform)
Nominal capacity:
In thousand Btu/h at 60 Hz,
ARI conditions
Motor
Features
HRH
036
U1L
P6
Other features
2
6
7
8
Oil sight
glass
None
None
Threaded
None
Oil
equalisation
None
None
None
Brazed
Oil drain
None
None
None
None
LP gauge
port
Schrader
None
None
None
Tubing and electrical connections
P: brazed connections, spade terminals
C: brazed connections, screw terminals
Motor protection
L: internal motor protection
Motor voltage code
1: 208-230V/1~/60 Hz
2: 208-230V/3~/60 Hz
4: 380-400V/3~/50 Hz & 460V/3~/60 Hz
5: 220-240V/1~/50 Hz & 265V/1~/60 Hz
7: 500V/3~/50 Hz & 575V/ 3~/60 Hz
9: 380V/3~/60 Hz
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
154
d.o.o.
Model variation
T: design optimized for 7.2/54.4 (45/130)
U: design optimized for 7.2/37.8 (45/100)
Size
G R U P A
Refrigerant & lubricant:
M: R22, mineral or alkylbenzene oil
P: R407C, POE lubricant
H: R410A, POE lubricant
J: R410A, PVE lubricant
Type
HRH/HLH/HLJ
Performance data
To
Model
HRP034T5
120U2019*
HRP040T5
120U1929*
HRP047T5
120U0986*
-25
-20
-15
-10
RESIDENTIAL SCROLL
HRP040T4
120U1016
HRP047T4
120U1046
HRP054T4
120U1691
HRP060T4
120U1726
LIGHT COMMERCIAL SCROLL
HLP072T4
120U1756
HLP081T4
120U1781
HCP094T4
120U0601
HCP109T4
120U0376
HCP120T4
120U0401
0
5
10
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
35
2 341
1,85
3119
1.82
4 019
1,79
5066
1.78
6 289
1.77
7 717
1.75
9375
1.71
11 292
1.66
45
-
-
2714
2.29
3 536
2.26
4494
2.24
5 614
2.22
6 925
2.20
8455
2.18
10230
2.13
55
-
-
-
-
-
-
3850
2.88
4 848
2.85
6 025
2.82
7407
2.78
9 022
2.73
35
2 524
2.138
3 369
2.097
4 346
2.072
5 484
2.06
6 815
2.04
8 370
2.02
10 181
1.98
12 278
1.92
45
-
-
2 879
2.654
3 761
2.617
4 787
2.59
5 989
2.57
7 398
2.55
9 043
2.56
10 956
2.46
55
-
-
-
4 014
3.34
5 066
3.30
6 306
3.26
7 765
3.22
9 473
3.16
35
3 029
2.468
4 051
2.419
5 227
2.390
6 595
2.37
8 196
2.36
10 066
2.33
12 245
2.28
14 771
2.214
45
-
-
3 424
3.082
4 485
3.038
5 714
3.01
7 149
2.99
8 829
2.96
10 792
2.92
13 077
2.86
4 746
3.90
5 994
3.86
7 462
3.82
9 187
3.77
11 208
3.70
-
35
3 754
2.999
5 006
2.940
6 455
2.905
8 147
2.88
10 125
2.86
12 435
2.83
15 123
2.78
18 234
2.69
45
-
-
4 310
3.740
5 620
3.686
7 150
3.65
8 944
3.62
11 047
3.59
13 504
3.54
16 361
3.47
6 034
4.73
7 611
4.67
9 473
4.62
11 666
4.56
14 232
4.47
55
HRP034T4
120U2024
-5
Tc
55
HRP060T5
120U1606*
R407C
35
2 480
1.73
3190
1.71
4 050
1.70
5080
1.69
6 290
1.68
7710
1.67
9340
1.64
11 220
1.59
45
-
-
2770
2.19
3 550
2.17
4470
2.16
5 560
2.15
6830
2.14
8310
2.11
10 010
2.08
55
-
-
-
-
-
-
3790
2.77
4 760
2.76
5900
2.75
7220
2.73
8 740
2.71
35
2 850
2.02
3 670
2.01
4 660
2.00
5 840
1.99
7 230
1.97
8 860
1.95
10 740
1.92
12 890
1.87
45
-
-
3 180
2.57
4 070
2.55
5 130
2.54
6 380
2.52
7 850
2.51
9 540
2.48
11 500
2.44
55
-
-
-
-
-
-
4 350
3.24
5 460
3.23
6 770
3.22
8 290
3.20
10 040
3.17
35
3 440
2.30
4 410
2.28
5 600
2.26
7 020
2.25
8 690
2.24
10 650
2.22
12 910
2.18
15 500
2.12
45
-
-
3 870
2.97
4 940
2.94
6 220
2.93
7 740
2.91
9 510
2.89
11 570
2.86
13 930
2.81
55
-
-
-
-
-
-
5 320
3.81
6 680
3.80
8 280
3.78
10 130
3.76
12 270
3.73
35
3 920
2.44
5 020
2.46
6 350
2.50
7 950
2.53
9 850
2.57
12 070
2.61
14 640
2.66
17 580
2.71
45
-
-
4 380
3.32
5 590
3.29
7 030
3.26
8 750
3.25
10 760
3.24
13 090
3.24
15 770
3.25
55
-
-
-
-
-
-
6 060
4.15
7 570
4.10
9 360
4.06
11 440
4.03
13 840
4.01
35
4 350
2.71
5 560
2.74
7 040
2.78
8 820
2.81
10 920
2.85
13 380
2.90
16 230
2.95
19 490
3.02
45
-
-
4 850
3.65
6 180
3.61
7 780
3.58
9 670
3.55
11 890
3.54
14 470
3.54
17 440
3.56
55
-
-
-
-
-
-
6 690
4.50
8 360
4.42
10 320
4.36
12 610
4.32
15 260
4.30
35
5 160
3.16
6 590
3.19
8 350
3.23
10 470
3.28
12 970
3,33
15 890
3.38
19 270
3.45
23 130
3.52
45
-
-
5 780
4.30
7 390
4.27
9 320
4.24
11 600
4,22
14 270
4.21
17 360
4.21
20 900
4.23
55
-
-
-
-
-
-
8 060
5.40
10 110
5,33
12 520
5.28
15 310
5.24
18 520
5.22
35
5 690
3.93
7 300
3.91
9 260
3.89
11 610
3.87
14 380
3,85
17 620
3.81
21 350
3.75
25 630
3.65
45
-
-
6 440
4.80
8 210
4.78
10 340
4.76
12 860
4.74
15 810
4.71
19 230
4.66
23 150
4.58
55
-
-
-
-
-
-
8 900
5.83
11 170
5.81
13 830
5.79
16 940
5.76
20 510
5.70
35
6 600
4.61
8 480
4.59
10 760
4.57
13 480
4.55
16 700
4.52
20 450
4.47
24 790
4.40
29 760
4.29
45
-
-
7 470
5.63
9 530
5.60
12 000
5.58
14 920
5.56
18 350
5.52
22 320
5.46
26 880
5.37
55
-
-
-
-
-
-
10 330
6.82
12 960
6.81
16 050
6.78
19 650
6.74
23 810
6.68
35
7 710
5.83
9 900
5.81
12 570
5.80
15 750
5.77
19 510
5.73
23 890
5.67
28 960
5.58
34 770
5.45
45
-
-
8 700
6.86
11 100
6.85
13 980
6.83
17 390
6.80
21 380
6.75
26 000
6.68
31 310
6.57
55
-
-
-
-
-
-
11 990
7,97
15 050
7.96
18 640
7.93
22 820
7.88
27 650
7.79
35
8 420
6.36
10 810
6.35
13 720
6.33
17 190
6.30
21 300
6.26
26 090
6.19
31 620
6.09
37 960
5.95
45
-
-
9 500
7.48
12 120
7.47
15 260
7.45
18 980
7.42
23 340
7.37
28 380
7.29
34 180
7.17
55
-
-
-
-
-
-
13 090
8.69
16 430
8.68
20 350
8.65
24 920
8.59
30 180
8.50
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
Qo: Cooling capacity in W
Pe: Power input in kW
Superheat = 11.1 K
Subcooling = 8.3 K
Voltage: 400 V / 3 / 50 Hz
*: Voltage: 220-240 V / 1 / 50 Hz
These code mumbers are normally on stock at our Partner, Wholesaler or have a short lead-time.
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
155
Full Danfoss A/C scroll compressor line-up
R22
TR
R410A
R407C
kW
2.5
8
Residential
3
9
HRM
10
3.5
HRH
12
HRP
4
4.5
15
Light commercial
5
6
HLM
HLP
HLJ
20
8
HCM
25
HCP
10
30
Commercial
12
Large
SH
15
20
25
30
SM
SY
SZ
35
45
60
75
90
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
156
Product range single compressors
D
H
H1
H2
S084
S090
S100
254
508
142
465
S110
S120
254
558
178
515
S148
S161
Nominal voltage
0D
200-230/
3/60
H2
H
266
591
180
556
All dimensions in mm
ØD
4
6
7
9
z
z
z
z
z
SM/SZ090
z
z
z
z
z
SM/SZ100
z
z
z
z
z
SM/SZ110
z
z
z
z
z
H
H1
H2
SM/SZ115
254
586
180
538
SM/SZ120
S160
266
631
180
596
S175
S185
316
678
180
641
SM/SZ125
z
{
SM/SZ160
All dimensions in mm
z
{
z
{
H1
H2
S240
344
729
196
656
S300
344
740
196
667
S380
344
770
203
695
H
H2
Family,
lubricant
& refrigerant
z
{
z
z
{
z
{
{
z
{
z
z
{
z
z
z
z
{
z
z
{
z
z
z
z
z
{
z
z
z
SM/SZ175
{
z
{
z
{
z
{
z
{
z
SM/SZ185
{
z
{
z
{
z
{
z
{
z
SY/SZ240
{
z
{
z
{
z
{
z
{
z
SY/SZ300
{
z
{
z
{
z
{
z
{
z
z
* SY380 only available for 400/3/50Hz
Nominal
capacity
{
z
SY/SZ380 *
H1
All dimensions in mm
{
z
ØD
H
z
z
z
SM/SZ161
D
{
z
SM/SZ148
H1
380/3/60
3
D
H
500/3/50
575/3/60
SM/SZ084
S115
S125
H2
230/3/50
Motor voltage code
Model
H1
400/3/50
460/3/60
Voltage
Version
{ Rotolock version z Brazed version
Packaging
SZ 185 - 4 R I
SY 300 A 9 AA M
ubricant
rant
l, Mineral oil,
22
, POE lubricant,
22
, POE lubricant,
407C - R134a
Packaging
I: Individual
M: Multiple
Version
Motor protection type
T
V
V
Brazed
Brazed
capacity
and Btu/h
R22,
itions
Internal thermostat, external
overload protector required
C
CA
R
RA
C
C
R
R
Brazed
Brazed
Rotolock
Rotolock
oltage code
above table
Electronic
protection
module
AA
AB
MA
MB
A
A
M
M
Brazed
Brazed
Rotolock
Rotolock
T
A
Evolution index
S 084 - 090 - 100 110 - 120 - 148 - 161
A
Evolution index
S 115 - 125 - 160 175 - 185
A
Evolution index
A
B
A
B
24 V
115/230 V
24 V
115/230 V
S 240 - 300
S 380 (no rotolock)
d.o.o.
V
VA
G R U P A
Internal overload
protector
Applies to
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
157
SM / SY R22
Model
SM084
SM090
SM100
SM110
SM115
SM120
SM125
SM148
SM160
SM161
SM175
SM185
SY240
SY300
SY380
SM170
SM180
SM200
SM220
SM230
SM242
SM250
SM268
SM271
SM281
SM285
SM290
SM296
SM310
SM320
SM322
SM350
SM370
SY482
SY540
SY620
SY680
SY760
-15
-10
-5
Qo
Pe
Qo
Pe
Qo
9 900
4.0 12 500
4.0 15 500
- 12 000
10 900
4.4 13 600
4.4 16 700
- 13 300
11 500
4.6 14 400
4.7 17 700
- 14 200
13 000
5.2 16 200
5.2 20 000
- 15 900
13 900
5.4 17 100
5.4 20 800
- 16 500
15 200
6.0 19 000
6.0 23 300
- 18 600
15 000
5.8 18 400
5.9 22 400
- 17 700
18 500
7.0 22 900
7.1 27 800
- 22 600
19 600
7.7 24 300
7.8 29 700
- 24 100
20 100
7.6 24 700
7.6 30 100
- 24 400
21 300
8.1 26 400
8.2 32 300
- 26 200
23 100
8.9 28 600
9.0 35 000
- 28 400
31 400
11.8 38 800
12.0 47 300
- 38 400
39 900
14.5 49 300
14.8 60 300
- 48 600
49 500
17.6 60 500
18.0 73 300
- 59 700
19 500
8.0 24 600
8.0 30 500
- 23 600
21 400
8.7 26 700
8.8 32 800
- 26 200
22 600
9.3 28 300
9.3 34 800
- 27 900
25 500
10.4 32 000
10.4 39 300
- 31 400
27 400
10.9 33 700
10.9 41 000
- 32 500
29 900
11.9 37 400
11.9 45 900
- 36 600
29 500
11.7 36 200
11.7 44 100
- 35 000
33 200
13.0 41 200
13.0 50 400
- 40 500
32 500
12.8 40 300
12.8 49 300
- 39 700
34 700
13.5 43 000
13.6 52 600
- 42 300
34 000
13.5 42 100
13.6 51 400
- 41 200
34 700
13.6 42 900
13.7 52 300
- 42 000
36 500
14.1 45 000
14.2 54 800
- 44 500
37 500
14.7 46 300
14.8 56 500
- 45 400
38 600
15.4 47 900
15.6 58 600
- 47 400
39 500
15.1 48 700
15.2 59 300
- 48 100
42 000
16.3 52 000
16.4 63 600
- 51 600
45 500
17.8 56 400
18.0 68 900
- 55 900
61 900
23.6 76 400
23.9 93 200
- 75 600
70 200
26.3 86 700
26.7 106 000
- 85 600
78 600
28.9 97 100
29.5 118 800
- 95 700
79 700
29.5 97 800
29.9 118 800
- 96 600
88 100
32.1 108 200
32.7 131 600
- 106 600
97 600
35.3 119 300
35.9 144 500
- 117 600
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
0
Pe
4.0
6.4
4.4
6.7
4.7
7.1
5.2
8.0
5.5
8.6
5.9
9.2
5.9
9.3
7.1
10.9
7.9
11.6
7.6
11.7
8.3
12.4
9.1
13.6
12.1
17.8
15.1
22.0
18.4
26.8
8.0
12.7
8.8
13.4
9.3
14.3
10.4
16.0
10.9
17.2
11.9
18.4
11.7
18.5
13.1
20.1
12.9
19.7
13.6
20.9
13.7
20.8
13.8
21.0
14.2
21.8
14.9
22.8
15.7
23.1
15.3
23.4
16.6
24.9
18.1
27.2
24.3
35.6
27.3
39.8
30.2
43.9
30.5
44.6
33.5
48.7
36.7
53.5
Qo: Cooling capacity in W
Pe: Power input in kW
Qo
18 900
15 000
20 200
16 400
21 500
17 400
24 200
19 600
25 100
20 700
28 200
22 800
27 000
22 300
33 600
27 500
35 900
29 600
36 300
29 700
39 000
32 000
42 200
34 600
57 100
46 600
73 100
59 200
88 100
72 300
37 200
29 600
39 900
32 300
42 300
34 400
47 700
38 600
49 500
40 800
55 600
45 000
53 200
43 800
60 800
49 600
59 600
48 600
63 600
51 800
62 000
51 100
63 100
51 900
66 100
54 100
68 200
56 000
70 800
58 300
71 500
58 600
76 800
63 000
83 200
68 200
112 500
91 900
128 300
104 300
144 100
116 700
143 000
117 200
158 800
129 600
173 500
142 500
5
Pe
4.0
6.3
4.4
6.7
4.7
7.1
5.2
8.0
5.5
8.5
5.9
9.2
5.9
9.2
7.2
10.9
8.0
11.6
7.7
11.7
8.4
12.5
9.1
13.7
12.4
18.0
15.6
22.4
18.8
27.1
8.0
12.6
8.8
13.3
9.4
14.2
10.5
16.0
10.9
17.1
11.9
18.3
11.7
18.4
13.1
20.1
12.9
19.7
13.6
20.9
13.8
20.8
13.8
21.1
14.3
21.8
15.0
22.9
15.9
23.3
15.4
23.4
16.7
25.0
18.3
27.3
24.7
36.1
27.9
40.4
31.1
44.7
31.1
45.1
34.3
49.4
37.5
54.1
Qo
22 800
18 500
24 300
19 900
25 800
21 200
29 000
23 800
30 000
25 500
33 700
27 600
32 300
27 400
40 100
33 100
43 000
35 800
43 400
35 800
46 600
38 500
50 500
41 800
68 300
56 100
87 900
71 600
104 900
86 800
44 900
36 500
47 900
39 300
50 900
41 700
57 100
46 800
59 100
50 200
66 400
54 400
63 500
54 000
72 700
59 800
71 300
58 700
75 900
62 500
74 100
62 300
75 400
63 100
79 000
65 200
81 500
68 100
84 700
70 600
85 500
70 600
91 800
75 900
99 400
82 300
134 500
110 600
153 800
125 900
173 200
141 100
170 600
140 800
189 900
156 100
206 700
171 000
Superheat = 11.1 K
Subcooling = 8.3 K
Pe
4.0
6.2
4.4
6.6
4.7
7.1
5.2
7.9
5.4
8.5
5.9
9.1
5.9
9.1
7.2
10.9
8.1
11.7
7.7
11.7
8.4
12.6
9.2
13.8
12.6
18.3
16.1
22.8
19.2
27.5
7.9
12.5
8.8
13.3
9.4
14.1
10.5
15.9
10.9
16.9
11.9
18.2
11.7
18.2
13.2
20.0
13.0
19.7
13.7
20.8
13.9
20.8
13.9
21.1
14.4
21.8
15.1
22.9
16.1
23.4
15.5
23.4
16.8
25.2
18.4
27.5
25.2
36.6
28.7
41.1
32.2
45.7
31.9
45.7
35.3
50.3
38.5
54.9
10
Qo
Pe
27 200
3.9
22 500
6.2
28 900
4.4
23 900
6.6
30 700
4.7
25 400
7.0
34 400
5.2
28 400
7.9
35 600
5.4
31 000
8.4
39 900
5.9
33 000
9.0
38 200
5.8
33 300
9.0
47 500
7.3
39 500
11.0
50 900
8.1
42 900
11.8
51 400
7.8
42 800
11.8
55 200
8.5
46 000
12.6
59 800
9.3
49 800
13.8
81 000
13.0
67 000
18.6
104 800
16.7
85 900
23.4
124 100
19.8
103 400
27.9
53 500
7.9
44 300
12.3
56 900
8.8
47 100
13.2
60 500
9.4
50 000
14.0
67 700
10.4
56 000
15.8
70 100
10.9
61 000
16.7
78 500
11.8
64 900
18.1
75 300
11.7
65 600
18.0
86 000
13.2
71 400
20.0
84 500
13.0
70 100
19.6
89 900
13.7
74 600
20.8
87 800
14.0
75 000
20.8
89 400
13.9
75 800
21.0
93 600
14.5
77 900
21.9
96 500
15.1
81 900
22.8
100 300
16.3
84 500
23.5
101 300
15.6
84 200
23.5
108 700
16.9
90 600
25.3
117 700
18.5
98 200
27.6
159 500
25.9
131 900
37.1
183 000
29.6
150 600
42.0
206 500
33.4
169 300
46.8
202 000
32.7
167 800
46.5
225 500
36.5
186 500
51.3
244 400
39.5
203 700
55.8
15
Qo
Pe
32 100
3.9
26 900
6.1
34 100
4.4
28 400
6.5
36 200
4.7
30 200
7.0
40 400
5.2
33 700
7.8
41 800
5.4
37 100
8.3
46 700
5.9
38 900
9.0
45 000
5.8
39 900
8.9
55 900
7.3
46 800
11.0
59 800
8.2
50 800
11.8
60 500
7.8
50 600
11.8
64 800
8.5
54 400
12.7
70 200
9.3
58 900
13.9
95 300
13.3
79 300
18.9
124 100
17.4
102 300
24.1
145 800
20.4
122 300
28.4
63 200
7.8
53 100
12.1
67 100
8.7
56 000
13.1
71 300
9.4
59 400
13.9
79 500
10.4
66 300
15.6
82 400
10.8
73 100
16.5
92 000
11.8
76 600
17.9
88 600
11.6
78 600
17.7
101 000
13.2
84 400
20.0
99 300
13.0
83 000
19.6
105 500
13.7
88 200
20.8
103 200
14.1
89 300
20.7
105 100
13.9
90 100
20.9
110 100
14.6
92 200
21.9
113 500
15.1
97 300
22.7
117 900
16.5
100 100
23.7
119 100
15.6
99 700
23.5
127 700
17.0
107 100
25.4
138 300
18.6
116 000
27.7
187 700
26.6
156 100
37.8
216 000
30.7
178 800
43.0
244 400
34.8
201 500
48.1
237 400
33.7
198 500
47.3
265 800
37.8
221 200
52.5
287 100
40.7
240 900
56.8
Voltage: 400 V / 3 / 50 Hz
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
158
d.o.o.
Legend:
-20
Qo
Pe
7 700
4.0
8 600
4.3
9 000
4.6
10 200
5.2
11 200
5.4
11 800
6.0
12 000
5.8
14 800
7.0
15 500
7.6
16 000
7.5
17 000
8.1
18 400
8.8
25 100
11.7
31 900
14.2
40 100
17.3
15 200
8.0
16 900
8.6
17 700
9.2
20 000
10.4
22 000
10.8
23 300
12.0
23 700
11.6
26 300
13.0
25 800
12.7
27 500
13.5
27 100
13.4
27 700
13.5
29 200
14.0
30 000
14.6
30 600
15.2
31 600
15.0
33 500
16.1
36 200
17.6
49 500
23.3
56 200
25.9
62 900
28.5
64 200
29.0
70 900
31.6
79 000
34.7
-
G R U P A
SY600
To
Tc
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
Performance data
SZ R134a
Model
SZ084
SZ090
SZ100
SZ110
SZ115
SZ120
SZ125
SZ148
SZ160
SZ161
SZ175
SZ185
SZ240
SZ300
SZ170
SZ180
SZ200
SZ220
SZ230
SZ242
SZ250
SZ268
SZ271
SZ281
SZ285
SZ290
SZ296
SZ310
SZ320
SZ322
SZ350
SZ370
SZ425
SZ482
SZ485
SZ600
-15
Qo
6 200
6 700
7 300
8 200
9 000
9 400
9 600
11 200
12 400
12 000
13 200
14 000
18 900
23 700
12 200
13 300
14 500
16 300
17 800
18 600
19 000
20 300
19 900
21 100
21 700
21 900
22 100
23 300
24 400
23 600
26 000
27 600
32 500
37 300
37 200
42 000
46 800
-
Pe
2.8
2.9
3.1
3.5
3.8
4.0
4.1
5.0
5.3
5.2
5.7
6.1
8.4
10.2
5.5
5.9
6.2
7.0
7.6
8.0
8.1
9.0
8.7
9.2
9.3
9.5
10.0
10.1
10.5
10.4
11.4
12.1
14.5
16.8
16.3
18.6
20.5
-
-10
Qo
8 000
6 100
8 600
6 600
9 400
7 300
10 500
8 100
11 600
8 900
12 000
9 300
12 300
9 500
14 400
11 200
15 900
12 300
15 300
12 100
16 900
13 100
18 000
13 900
23 900
18 800
30 000
23 600
15 700
11 900
17 000
13 100
18 400
14 400
20 700
16 100
22 800
17 500
23 700
18 300
24 300
18 600
26 000
20 100
27 800
21 400
29 200
22 900
27 800
21 400
28 000
21 600
28 300
22 000
29 800
23 000
31 300
24 200
30 100
23 800
33 200
25 700
35 400
27 400
37 100
28 700
47 100
37 100
43 800
33 800
53 100
41 800
59 100
46 500
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
-5
Pe
2.8
4.3
2.9
4.5
3.1
4.8
3.5
5.4
3.8
5.9
4.0
6.2
4.1
6.3
5.0
7.7
5.3
7.9
5.2
8.0
5.8
8.6
6.1
9.1
8.5
12.3
10.4
15.2
5.6
8.6
5.9
9.1
6.2
9.6
7.0
10.8
7.6
11.7
8.1
12.5
8.1
12.5
9.1
13.9
9.4
14.2
10.2
15.7
9.4
14.2
9.6
14.4
10.0
15.4
10.2
15.4
10.6
15.8
10.5
15.9
11.5
17.1
12.3
18.2
12.9
19.9
17.0
24.6
15.1
23.3
18.9
27.5
20.8
30.3
Qo
10 100
7 900
10 900
8 500
11 700
9 300
13 200
10 400
14 500
11 400
15 100
11 900
15 500
12 100
18 100
14 200
20 000
15 800
19 200
15 300
21 200
16 700
22 600
17 800
29 900
23 800
37 500
29 700
19 900
15 500
21 400
16 800
23 000
18 200
25 900
20 500
28 600
22 500
29 700
23 400
30 500
23 900
32 700
25 700
34 900
27 500
36 800
29 100
34 900
27 500
35 200
27 700
35 700
28 000
37 500
29 500
39 300
31 000
37 800
30 200
41 800
33 000
44 500
35 100
46 600
36 700
58 900
46 900
54 800
43 200
66 400
52 800
73 800
58 600
0
Pe
2.8
4.3
3.0
4.6
3.1
4.8
3.5
5.4
3.8
5.9
4.1
6.3
4.1
6.3
5.0
7.7
5.4
8.0
5.3
8.0
5.8
8.6
6.2
9.2
8.6
12.5
10.5
15.4
5.6
8.6
5.9
9.1
6.3
9.7
7.1
10.9
7.6
11.8
8.1
12.5
8.1
12.5
9.1
14.0
9.4
14.2
10.3
15.7
9.4
14.2
9.6
14.5
10.0
15.4
10.3
15.5
10.7
15.9
10.5
16.0
11.6
17.3
12.4
18.4
13.0
20.0
17.2
24.9
15.2
23.4
19.1
27.9
21.0
30.8
Qo
12 600
9 900
13 400
10 700
14 400
11 500
16 200
13 000
17 900
14 300
18 700
14 900
19 100
15 200
22 600
17 800
24 700
19 800
23 800
19 200
26 200
21 000
27 900
22 400
37 100
29 700
46 300
37 100
24 800
19 600
26 500
21 100
28 400
22 700
32 000
25 600
35 300
28 200
36 800
29 300
37 600
30 000
40 700
32 200
39 500
31 700
41 900
33 500
43 100
34 500
43 500
34 800
44 500
35 200
46 300
37 100
48 700
39 000
46 900
37 800
51 700
41 400
55 000
44 100
64 100
51 300
73 100
58 500
73 200
58 600
82 200
65 800
91 300
73 000
Qo: Cooling capacity in W
Pe: Power input in kW
5
Pe
2.8
4.3
2.9
4.6
3.1
4.9
3.5
5.5
3.8
5.9
4.1
6.3
4.1
6.3
5.0
7.7
5.4
8.0
5.3
8.1
5.9
8.7
6.2
9.3
8.7
12.6
10.6
15.6
5.5
8.6
5.9
9.1
6.3
9.7
7.1
10.9
7.6
11.8
8.1
12.5
8.1
12.6
9.1
14.0
8.9
13.5
9.4
14.3
9.5
14.3
9.7
14.6
10.0
15.4
10.3
15.5
10.8
16.0
10.6
16.1
11.7
17.4
12.5
18.5
14.9
21.9
17.3
25.2
16.9
24.9
19.3
28.3
21.2
31.3
Qo
15 400
12 400
16 400
13 200
17 500
14 100
19 800
16 000
21 800
17 600
22 800
18 400
23 300
18 800
27 900
22 100
30 200
24 500
29 200
23 700
32 100
26 000
34 100
27 700
45 700
36 700
56 700
45 800
30 400
24 300
32 300
26 000
34 500
27 800
39 000
31 400
43 000
34 800
44 900
36 200
45 800
37 000
49 900
39 900
48 300
39 000
51 200
41 400
52 600
42 600
53 100
43 000
54 900
43 500
56 500
45 800
59 400
48 200
57 600
46 600
63 100
51 200
67 200
54 500
78 700
63 400
90 100
72 300
89 500
72 300
100 900
81 200
111 800
90 100
Superheat = 11.1 K
Subcooling = 8.3 K
10
Pe
2.7
4.3
2.9
4.6
3.1
4.9
3.5
5.5
3.8
5.9
4.1
6.3
4.0
6.3
5.0
7.7
5.4
8.1
5.4
8.1
5.9
8.7
6.3
9.3
8.7
12.7
10.7
15.9
5.5
8.6
5.8
9.1
6.2
9.7
7.1
10.9
7.6
11.8
8.1
12.5
8.1
12.6
9.1
14.0
8.9
13.6
9.4
14.4
9.5
14.4
9.7
14.6
10.0
15.5
10.3
15.6
10.8
16.1
10.7
16.2
11.8
17.5
12.5
18.6
15.0
22.1
17.5
25.5
17.0
25.2
19.5
28.6
21.4
31.8
Qo
18 700
15 100
19 800
16 000
21 000
17 100
23 800
19 400
26 300
21 400
27 500
22 400
28 000
22 800
34 000
27 100
36 400
29 800
35 500
28 900
38 700
31 700
41 200
33 700
56 000
45 000
68 900
55 900
36 800
29 800
39 000
31 600
41 400
33 600
46 900
38 200
51 700
42 200
54 200
44 200
55 100
45 000
60 600
48 700
58 400
47 600
62 100
50 600
63 400
51 900
64 000
52 300
67 000
53 300
68 100
55 700
71 700
58 700
69 900
56 900
76 200
62 400
81 100
66 400
95 700
77 500
110 400
88 600
108 400
88 300
123 000
99 400
135 600
110 200
15
Pe
2.7
4.3
2.9
4.5
3.1
4.9
3.5
5.5
3.7
5.9
4.1
6.3
4.0
6.3
5.0
7.8
5.4
8.1
5.4
8.1
5.9
8.8
6.3
9.3
8.8
12.9
10.8
16.1
5.4
8.5
5.8
9.1
6.2
9.7
7.0
10.9
7.5
11.8
8.1
12.5
8.0
12.5
9.1
14.0
8.9
13.6
9.4
14.4
9.4
14.4
9.6
14.7
10.0
15.5
10.2
15.6
10.8
16.2
10.8
16.2
11.7
17.5
12.5
18.7
15.1
22.2
17.6
25.7
17.1
25.5
19.6
29.0
21.6
32.3
Qo
22 400
18 300
23 600
19 300
25 000
20 400
28 400
23 300
31 200
25 700
32 900
27 000
33 300
27 400
41 100
32 800
43 500
35 900
42 700
35 000
46 200
38 100
49 200
40 600
68 200
54 700
82 800
67 800
44 000
36 000
46 500
38 000
49 200
40 200
56 000
45 900
61 600
50 700
64 900
53 300
65 600
54 000
72 900
59 000
70 000
57 400
74 500
61 100
75 600
62 400
76 300
62 900
80 900
64 700
81 200
67 000
85 700
70 700
84 100
68 900
91 100
75 100
96 900
79 900
115 600
93 900
134 300
107 800
130 100
106 800
148 700
120 700
163 200
133 600
Voltage: 400 V / 3 / 50 Hz
Pe
2.6
4.2
2.8
4.5
3.1
4.8
3.5
5.4
3.7
5.9
4.0
6.2
3.9
6.2
5.0
7.8
5.4
8.1
5.4
8.1
5.8
8.8
6.2
9.3
8.9
13.0
11.0
16.4
5.3
8.4
5.7
9.0
6.1
9.7
6.9
10.9
7.4
11.7
8.0
12.4
7.9
12.5
9.0
14.0
8.9
13.6
9.4
14.3
9.3
14.3
9.5
14.6
10.0
15.6
10.1
15.6
10.8
16.2
10.8
16.2
11.7
17.5
12.4
18.6
15.1
22.3
17.7
26.0
17.2
25.8
19.8
29.4
21.9
32.8
d.o.o.
Legend:
To
Tc
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
G R U P A
SZ540
Performance data
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
159
SZ R407C
Model
SZ084
SZ090
SZ100
SZ110
SZ115
SZ120
SZ125
SZ148
SZ160
SZ161
SZ175
SZ185
SZ240
SZ300
SZ380
SZ170
SZ180
SZ200
SZ220
SZ230
SZ242
SZ250
SZ268
SZ271
SZ281
SZ285
SZ290
SZ296
SZ310
SZ320
SZ322
SZ350
SZ370
SZ425
SZ482
SZ485
SZ540
SZ620
SZ680
SZ760
-15
-10
-5
Qo
Pe
Qo
Pe
Qo
9 300
3.9 11 800
4.0 14 800
- 11 300
9 800
4.1 12 500
4.2 15 600
- 12 000
10 500
4.4 13 300
4.4 16 600
- 12 700
12 000
5.0 15 200
5.0 19 000
- 14 500
13 100
5.4 16 600
5.4 20 800
- 15 800
14 200
5.7 17 900
5.8 22 200
- 17 000
14 000
5.7 17 700
5.7 22 100
- 16 800
17 300
7.0 21 700
7.0 27 000
- 21 200
19 000
7.4 23 900
7.5 29 700
- 23 200
18 700
7.5 23 500
7.5 29 200
- 22 900
19 800
8.0 25 000
8.1 31 100
- 24 000
21 300
8.6 26 900
8.7 33 400
- 25 700
28 800
11.8 36 400
11.9 45 300
21 800
17.9 28 000
18.0 35 300
36 100
13.9 45 000
14.1 55 400
28 400
21.2 35 700
21.6 44 400
45 300
17.3 56 400
17.6 69 400
35 000
26.1 44 200
26.6 55 000
18 300
7.9 23 200
8.0 29 100
- 22 300
19 400
8.3 24 600
8.3 30 800
- 23 600
20 600
8.8 26 100
8.8 32 700
- 25 000
23 700
9.9 30 000
10.0 37 400
- 28 600
25 800
10.8 32 800
10.9 40 900
- 31 100
27 900
11.5 35 200
11.6 43 800
- 33 600
27 500
11.4 34 900
11.5 43 500
- 33 100
31 000
12.7 39 000
12.8 48 500
- 37 600
30 200
12.5 38 100
12.6 47 400
- 36 900
32 300
13.2 40 800
13.3 50 700
- 39 300
32 400
13.2 41 000
13.3 51 000
- 39 400
32 500
13.5 41 000
13.5 51 100
- 39 100
34 000
13.9 42 800
14.0 53 200
- 41 700
34 700
14.4 43 900
14.5 54 700
- 41 900
37 300
14.9 47 000
15.0 58 400
- 45 700
36 800
15.0 46 300
15.1 57 500
- 45 100
39 100
16.1 49 300
16.2 61 200
- 47 200
42 000
17.3 52 900
17.4 65 800
- 50 700
49 400
20.4 62 300
20.7 77 500
- 60 100
56 700
23.6 71 700
23.9 89 300
- 69 500
56 600
22.5 70 800
22.8 87 400
- 69 100
64 000
25.7 80 100
26.0 99 200
49 400
39.1 62 800
39.6 78 500
71 200
27.8 88 600
28.1 109 100
55 900
42.3 70 400
43.2 87 400
73 000
29.1 91 400
29.6 113 000
56 000
43.9 71 200
44.6 88 900
80 200
31.2 99 900
31.7 122 900
62 500
47.2 78 800
48.2 97 900
89 300
34.6 111 200
35.3 136 800
69 000
52.1 87 200
53.2 108 300
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
Pe
4.0
6.2
4.2
6.5
4.4
6.9
5.0
7.9
5.5
8.7
5.8
9.2
5.7
9.2
7.0
11.1
7.6
11.8
7.6
12.0
8.2
12.7
8.8
13.7
12.1
18.2
14.3
22.1
18.0
27.0
8.0
12.3
8.4
13.0
8.9
13.8
10.1
15.8
10.9
17.4
11.6
18.3
11.5
18.3
12.9
20.3
12.6
19.9
13.4
21.2
13.3
21.0
13.6
21.4
14.1
22.2
14.5
22.9
15.1
23.6
15.1
23.9
16.3
25.4
17.5
27.4
20.9
31.9
24.2
36.4
23.1
35.7
26.4
40.3
28.5
44.1
30.0
45.2
32.2
49.1
35.9
54.1
Qo: Cooling capacity in W
Pe: Power input in kW
0
Qo
18 300
14 200
19 300
15 000
20 500
15 900
23 400
18 100
25 600
19 800
27 300
21 200
27 200
21 000
33 100
26 200
36 400
28 800
35 800
28 400
38 100
29 800
41 000
32 000
55 800
43 800
67 500
54 500
84 600
67 500
36 000
27 900
38 000
29 500
40 300
31 300
46 100
35 800
50 400
38 900
53 800
41 800
53 600
41 400
59 500
46 700
58 300
45 800
62 200
48 800
62 700
49 000
62 800
48 800
65 300
51 700
67 200
52 200
71 800
56 700
70 600
55 900
75 200
58 600
80 700
63 000
95 300
74 700
109 800
86 300
106 800
85 200
121 400
96 900
132 900
107 400
138 300
109 700
149 800
120 200
166 700
133 000
Pe
4.0
6.2
4.2
6.5
4.5
6.9
5.0
7.9
5.4
8.7
5.8
9.2
5.7
9.1
7.1
11.1
7.6
11.9
7.6
12.0
8.2
12.8
8.8
13.7
12.2
18.4
14.5
22.5
18.3
27.4
8.0
12.4
8.4
13.0
8.9
13.9
10.1
15.8
10.9
17.3
11.6
18.4
11.5
18.3
12.9
20.3
12.6
19.9
13.4
21.2
13.3
21.0
13.7
21.5
14.2
22.3
14.6
22.9
15.2
23.7
15.2
24.0
16.4
25.6
17.6
27.5
21.1
32.2
24.5
36.8
23.3
36.2
26.7
40.9
28.9
44.9
30.5
45.9
32.7
49.9
36.5
54.8
5
Qo
22 300
17 500
23 600
18 500
25 000
19 600
28 500
22 300
31 100
24 400
33 200
26 100
33 100
25 900
40 300
32 100
44 300
35 200
43 500
34 700
46 300
36 500
49 700
39 200
67 900
53 800
81 600
66 400
102 200
82 100
44 000
34 500
46 400
36 400
49 200
38 600
56 100
44 000
61 200
48 000
65 400
51 300
65 200
51 100
72 300
57 300
70 900
56 200
75 600
59 900
76 200
60 200
76 200
59 900
79 300
63 200
81 600
64 100
87 200
69 400
85 800
68 400
91 200
71 900
98 000
77 200
115 800
91 600
133 700
105 900
129 300
104 000
147 200
118 300
160 700
130 700
167 500
133 800
181 000
146 200
201 300
161 700
Superheat = 11.1 K
Subcooling = 8.3 K
Pe
4.0
6.2
4.2
6.5
4.4
6.9
5.0
7.9
5.4
8.6
5.8
9.2
5.7
9.1
7.1
11.1
7.6
11.9
7.6
12.0
8.2
12.8
8.8
13.8
12.4
18.7
14.7
22.9
18.6
27.8
8.0
12.4
8.4
13.1
8.9
13.9
10.0
15.8
10.9
17.3
11.5
18.3
11.4
18.2
12.9
20.3
12.7
19.9
13.4
21.2
13.3
21.0
13.7
21.5
14.2
22.3
14.6
22.9
15.2
23.8
15.3
24.0
16.4
25.6
17.7
27.6
21.2
32.5
24.8
37.3
23.5
36.6
27.1
41.5
29.4
45.7
31.0
46.5
33.3
50.6
37.1
55.5
10
Qo
27 000
21 400
28 500
22 500
30 100
23 800
34 300
27 200
37 400
29 600
39 900
31 600
39 800
31 500
48 500
38 900
53 300
42 700
52 400
42 100
55 600
44 200
59 700
47 500
81 800
65 300
97 800
80 100
122 400
98 900
53 200
42 100
56 100
44 400
59 300
47 000
67 500
53 500
73 700
58 400
78 600
62 300
78 300
62 100
87 000
69 400
85 400
68 200
90 900
72 600
91 700
73 200
91 600
72 700
95 500
76 600
98 000
77 800
105 000
84 200
103 300
82 900
109 500
87 100
117 700
93 500
139 400
111 100
161 200
128 600
155 100
125 700
176 900
143 200
192 600
157 800
201 200
161 700
216 900
176 300
241 100
194 800
Pe
4.0
6.2
4.2
6.5
4.4
6.9
5.0
7.8
5.4
8.6
5.7
9.1
5.7
9.0
7.1
11.1
7.6
11.9
7.7
12.0
8.2
12.8
8.8
13.8
12.5
18.9
14.9
23.2
18.9
28.1
8.0
12.4
8.3
13.0
8.8
13.8
10.0
15.7
10.8
17.2
11.4
18.1
11.4
18.1
12.9
20.2
12.7
19.9
13.4
21.1
13.3
21.0
13.6
21.4
14.3
22.3
14.5
22.9
15.2
23.8
15.4
24.0
16.4
25.7
17.7
27.6
21.4
32.8
25.0
37.9
23.8
37.0
27.5
42.2
29.9
46.4
31.5
47.1
33.9
51.4
37.9
56.2
15
Qo
32 300
25 800
34 100
27 200
36 000
28 700
40 900
32 700
44 500
35 600
47 600
38 000
47 400
37 900
57 800
46 700
63 600
51 400
62 600
50 600
66 200
53 000
71 100
56 900
97 800
78 500
116 300
95 900
145 400
118 200
63 700
50 900
67 100
53 600
70 900
56 600
80 600
64 400
87 700
70 200
93 700
74 800
93 300
74 700
103 800
83 400
102 000
82 000
108 500
87 200
109 300
88 000
109 000
87 300
114 000
92 000
116 700
93 400
125 400
101 300
123 300
99 600
130 300
104 400
140 000
112 100
166 400
133 400
192 700
154 700
184 600
150 600
210 900
171 800
229 100
189 000
239 600
193 700
257 800
210 900
286 500
232 800
Voltage: 400 V / 3 / 50 Hz
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
160
Pe
3.9
6.2
4.1
6.5
4.4
6.9
4.9
7.8
5.3
8.5
5.6
9.0
5.6
9.0
7.2
11.1
7.6
11.9
7.8
12.0
8.2
12.8
8.8
13.8
12.6
19.2
15.2
23.6
19.4
28.5
7.9
12.4
8.2
13.0
8.7
13.8
9.8
15.5
10.7
17.0
11.2
17.9
11.3
17.9
12.8
20.1
12.7
19.8
13.4
21.0
13.2
20.9
13.5
21.3
14.4
22.3
14.4
22.8
15.2
23.9
15.5
24.0
16.4
25.7
17.6
27.6
21.5
33.0
25.3
38.4
24.0
37.4
27.8
42.8
30.4
47.2
32.0
47.7
34.6
52.1
38.7
56.9
d.o.o.
Legend:
-20
Qo
Pe
7 200
3.9
7 600
4.1
8 100
4.3
9 300
4.9
10 100
5.4
11 000
5.7
10 800
5.7
13 500
6.9
14 800
7.3
14 600
7.4
15 500
8.0
16 600
8.6
22 400
11.7
28 600
13.7
36 000
16.9
14 200
7.8
15 000
8.2
16 000
8.7
18 400
9.9
20 000
10.8
21 600
11.4
21 200
11.4
12.6
24 100
23 600
12.4
25 200
13.1
25 200
13.0
25 200
13.4
26 600
13.8
27 000
14.2
29 200
14.7
28 700
14.9
30 500
15.9
32 700
17.1
38 400
20.2
44 100
23.4
44 600
22.2
50 300
25.4
56 400
27.4
57 500
28.6
63 600
30.6
70 800
33.8
-
G R U P A
SZ600
To
Tc
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
35
55
Performance data
Performer ® technology
Scrolls with tip seal technology and «no contact»
between scroll flanks
Discharge check valve
Reverse rotation
protection
Discharge port
Oldham coupling
Upper bearing, shaft
and counterweight
With its controlled orbit and
ultra-precise scroll profile, the
Performer® orbiting scroll rolls
and slides on an oil film with no
friction or wear. In the axial plane the scroll tips are
kept dynamically in contact with the opposite
scroll base plate via opposing floating seals,
reducing friction losses and
increasing efficiency.
Discharge connection rotolock or
brazed
Stationary scroll
Shielded motor 100%
gas cooled
Lower bearing
and oil pump
Multiple knock out connecting box
Motor protection
Oil sight glass
Suction connection
Rotolock
Brazed
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
161
Product range tandem compressors
Nominal voltage
H
Model
Composition
400/3/50
460/3/60
3
4
6
7
9
230/3/50
380/3/60
Motor voltage code
D
L
500/3/50
575/3/60
200-230/
3/60
D
423
H
532
SM/SZ170
S084 + S084
z
z
z
z
z
S170 - 180 - 200
L
757
SM/SZ180
S090 + S090
z
z
z
z
z
S 220 - 242
777
443
582
SM/SZ200
S100 + S100
z
z
z
z
z
S 230 - 250
836
480
603
S 320
911
480
657
SM/SZ220
S110 + S110
z
z
z
z
z
S 296 - 322
S 350 - 370
924
1004
438
495
614
717
SM/SZ230
S115 + S115
z
z
z
z
z
SM/SZ242
S120 + S120
z
z
z
z
z
SM/SZ250
S125 + S125
z
z
z
z
z
SM/SZ268
S148 + S120
z
z
z
z
z
SM/SZ271
S161 + S110
z
z
z
z
z
SM/SZ281
S161 + s120
z
z
z
z
z
SM/SZ285
S160 + S125
z
z
z
z
z
SM/SZ290
S175 + S115
z
z
z
z
z
SM/SZ296
S148 + S148
z
z
z
z
z
SM/SZ310
S185 + S125
z
z
z
z
z
SM/SZ320
S160 + S160
z
z
z
z
z
SM/SZ322
S161 + S161
z
z
z
z
z
SM/SZ350
S175 + S175
z
z
z
z
z
SM/SZ370
S185 + S185
z
z
z
z
z
SZ425
S240 + S185
{
{
{
{
{
SY/SZ482
S240 + S240
{
{
{
{
{
SZ485
S300 + S185
{
{
{
{
{
SY/SZ540
S300 + S240
{
{
{
{
{
SY/SZ600
S300 + S300
{
{
{
{
{
All dimensions in mm
H
D
L
S 268 - 271 - 281
L
930
D
441
H
614
S 285
884
480
657
S 290 - 310
924
480
705
1029
1029
552
552
729
740
S 425
S 485
All dimensions in mm
H
D
SY/SZ620 *
S240 + S380
{
H
730
SY/SZ680 *
S300 + S380
{
SY/SZ760 *
S380 + S380
{
L
S 482
S 540
L
984
D
510
984
510
740
S 600
984
510
740
S 620
1058
595
770
S 680
S 760
1058
1063
595
595
770
770
* SY models only available for 400/3/50Hz
z Factory built
{ Field assembly
All dimensions in mm
Family,
lubricant
& refrigerant
Nominal
capacity
Voltage
SZ 285 - 4
-
A
Motor voltage code:
Refer to above table
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
162
d.o.o.
Nominal capacity
in thousand Btu/h
at 60 Hz, R22,
ARI conditions
G R U P A
Family, lubricant
& refrigerant
SM: Scroll, Mineral oil, for R22
SY: Scroll, POE lubricant, for R22
SZ: Scroll, POE lubricant, for R407C - R134a
Evolution
index
PRODUCT RANGE
Voltage code - Nominal voltage - Range
4
6
7
400/3/50
500/3/50
230/3/50
460/3/60
575/3/60
3
Model
200-230/3/60
SH090
SH120
SH161
SH180
SH240
SH300
SH380
LBrazed version
Dimensions
9
Model
D
(mm)
H
(mm)
H1
(mm)
H2
(mm)
SH090
SH120
SH161
SH180
SH240
SH300
SH380
243
243
243
318
318
333
333
483
540
540
679
679
723
755
235
278
278
331
331
331
331
452
509
509
664
664
658
696
380/3/60
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
LL
LL
-
LL
LL
LL
LL
-
LL
LL
LL
LL
-
LL
LL
LL
LL
-
LL
LL
LRotolock version
H
H2
H
H2
H2
H1
H1
H1
H1
H
H
H2
H
H2
H
H2
H1
H1
D
D
D
D
D
D
SH090
SH120 - SH161
SH180
SH240
SH300
SH380
Tandem
model
Composition
SH182
SH210
SH242
SH281
SH322
SH360
SH420
SH480
SH482
SH540
SH600
SH760
SH090 + SH090
SH120 + SH090
SH120 + SH120
SH161 + SH120
SH161 + SH161
SH180 + SH180
SH240 + SH180
SH300 + SH180
SH240 + SH240
SH300 + SH240
SH300 + SH300
SH380 + SH380
3
200-230/3/60
Voltage code - Nominal voltage - Range
4
6
7
400/3/50
500/3/50
230/3/50
460/3/60
575/3/60
9
380/3/60
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
-
L
L
H
Tandem
model
SH182
SH210
SH242
SH281
SH322
SH360
SH420
SH480
SH482
SH540
SH600
SH760
Dimensions
L
(mm)
W
(mm)
H
(mm)
732
732
724
724
724
985
987
987
985
987
985
990
425
425
425
425
425
526
533
535
533
535
535
535
506
563
563
563
563
700
700
737
700
737
737
770
H
W
L
SH182 - SH210 - SH242 - SH281 - SH322
W
L
SH360 - SH420 - SH480 - SH482 - SH540 - SH600 - SH760
NAMEPLATE REFERENCE
SH 300 A 4 AB A
SH:
Scroll, for R410A
Nominal capacity
in thousand Btu/h
at 60 Hz, R410A,
ARI conditions
Suction and discharge connections
A: Brazed connections
M: Rotolock connections
d.o.o.
Motor voltage code:
3: 200-230/3/60
4: 380-400/3/50 - 460/3/60
6: 230/3/50
7: 500/3/50 - 575/3/60
9: 380/3/60
Motor protection
L: Internal overload protector
A: Electronic, 24V
SH180: 230V
B: Electronic,
SH240-300: 115/230V
C: Customized electrical box
G R U P A
UL index
Evolution index
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
163
SH - R410A
50 Hz PERFORMANCE DATA
To
Model
SH090-4
SH120-4
SH161-4
SH180-4
SH240-4
SH300-4
SH380-4
SH182-4
SH210-4
SH242-4
SH281-4
SH322-4
SH360-4
SH420-4
SH480-4
SH482-4
SH540-4
SH600-4
-15
-10
-5
0
5
10
15
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
35
9 730
4.5
12 140
4.6
14 960
4.7
18 230
4.8
21 990
4.8
26 310
4.9
31 230
4.9
36 790
4.9
45
8 460
5.6
10 670
5.7
13 220
5.7
16 180
5.8
19 590
5.9
23 510
5.9
27 970
6.0
33 040
6.0
55
-
-
-
-
11 330
7.1
13 930
7.1
16 940
7.2
20 410
7.2
24 390
7.3
28 930
7.4
35
13 070
5.9
16 310
6.0
20 090
6.1
24 480
6.2
29 540
6.3
35 330
6.4
41 930
6.5
49 400
6.5
45
11 370
7.4
14 340
7.4
17 780
7.5
21 750
7.6
26 330
7.7
31 590
7.8
37 580
7.9
44 380
7.9
55
-
-
-
-
15 220
9.3
18 720
9.4
22 760
9.5
27 420
9.5
32 750
9.6
38 820
9.7
35
17 320
7.8
21 470
7.9
26 300
7.9
31 900
8.0
38 350
8.0
45 730
8.1
54 120
8.2
63 620
8.4
45
15 080
9.8
18 890
9.8
23 310
9.8
28 420
9.8
34 310
9.9
41 050
9.9
48 730
10.0
57 450
10.1
55
-
-
-
-
19 850
12.4
24 350
12.3
29 540
12.3
35 520
12.3
42 380
12.3
50 200
12.3
35
19 200
9.4
23 870
9.3
29 340
9.2
35 740
9.2
43 150
9.1
51 690
9.1
61 460
9.1
72 560
9.1
45
16 080
11.8
20 530
11.6
25 670
11.4
31 610
11.3
38 450
11.3
46 310
11.2
55 280
11.2
65 470
11.2
55
-
-
-
-
21 790
14.3
27 120
14.1
33 230
14.0
40 240
13.9
48 260
13.9
57 400
13.9
35
26 450
12.2
32 880
12.2
40 380
12.2
49 070
12.2
59 080
12.2
70 540
12.2
83 570
12.3
98 300
12.6
45
22 840
15.2
28 750
15.3
35 610
15.3
43 550
15.3
52 680
15.2
63 140
15.2
75 070
15.2
88 570
15.3
55
-
-
-
-
30 370
19.2
37 400
19.2
45 520
19.1
54 850
19.1
65 540
19.0
77 710
19.0
35
33 720
16.0
41 790
16.1
51 210
16.2
62 140
16.2
74 710
16.2
89 110
16.2
105 470
16.2
123 970
16.2
45
29 260
19.5
36 720
19.7
45 390
19.7
55 410
19.8
66 960
19.8
80 190
19.8
95 250
19.8
112 320
19.7
55
-
-
-
-
38 620
24.3
47 480
24.3
57 730
24.4
69 540
24.3
83 060
24.3
98 470
24.2
35
40 130
18.7
49 630
18.7
60 680
18.7
73 500
18.8
88 250
18.9
105 140
19.0
124 360
19.1
146 090
19.1
45
35 000
23.0
43 710
22.9
53 800
22.9
65 460
23.0
78 890
23.1
94 280
23.2
111 820
23.3
131 710
23.4
55
-
-
-
-
45 930
28.3
56 170
28.3
68 020
28.4
81 660
28.5
97 290
28.6
115 110
28.7
35
19 180
9.0
23 930
9.2
29 470
9.4
35 900
9.5
43 330
9.6
51 830
9.8
61 520
9.8
72 480
9.9
45
16 670
11.2
21 010
11.3
26 050
11.4
31 870
11.6
38 600
11.7
46 310
11.9
55 110
12.0
65 100
12.1
55
-
-
-
-
22 320
14.2
27 450
14.3
33 380
14.4
40 210
14.5
48 050
14.6
56 990
14.7
35
22 460
10.5
28 030
10.6
34 520
10.8
42 060
11.0
50 760
11.2
60 720
11.3
72 060
11.4
84 900
11.5
45
19 540
13.0
24 630
13.1
30 530
13.3
37 360
13.4
45 240
13.6
54 270
13.7
64 570
13.9
76 260
14.0
55
-
-
-
-
26 150
16.4
32 160
16.5
39 110
16.7
47 110
16.8
56 280
16.9
66 740
17.0
35
25 750
11.9
32 130
12.1
39 580
12.3
48 220
12.5
58 180
12.7
69 600
12.8
82 600
12.9
97 320
13.0
45
22 400
14.7
28 240
14.9
35 020
15.1
42 850
15.2
51 880
15.4
62 230
15.6
74 030
15.7
87 430
15.9
55
-
-
-
-
29 980
18.7
36 880
18.8
44 840
18.9
54 010
19.1
64 510
19.2
76 480
19.3
35
29 930
13.8
37 210
13.9
45 690
14.1
55 530
14.2
66 860
14.3
79 840
14.5
94 610
14.7
111 320
14.9
45
26 050
17.2
32 730
17.3
40 470
17.4
49 420
17.5
59 730
17.6
71 550
17.7
85 020
17.8
100 300
18.0
55
-
-
-
-
34 540
21.7
42 420
21.8
51 520
21.8
62 000
21.9
74 000
21.9
87 690
22.0
35
34 110
15.7
42 290
15.7
51 810
15.8
62 840
15.9
75 540
16.0
90 080
16.2
106 620
16.4
125 330
16.7
45
29 700
19.6
37 220
19.6
45 930
19.7
55 990
19.7
67 580
19.7
80 870
19.8
96 010
19.9
113 170
20.1
55
-
-
-
-
39 110
24.7
47 960
24.7
58 200
24.6
69 980
24.6
83 500
24.6
98 900
24.7
35
37 820
18.8
47 020
18.6
57 810
18.4
70 400
18.3
85 010
18.3
101 830
18.2
121 080
18.2
142 950
18.1
45
31 670
23.6
40 450
23.2
50 580
22.9
62 280
22.7
75 760
22.5
91 230
22.4
108 900
22.4
128 980
22.4
55
-
-
-
-
42 930
28.6
53 420
28.3
65 460
28.0
79 270
27.8
95 080
27.8
113 080
27.7
35
44 960
21.6
55 890
21.5
68 680
21.4
83 540
21.4
100 700
21.3
120 400
21.3
142 860
21.4
168 300
21.6
45
38 330
27.0
48 540
26.9
60 360
26.7
74 030
26.6
89 770
26.5
107 810
26.4
128 390
26.4
151 730
26.5
55
-
-
-
-
51 380
33.5
63 550
33.3
77 560
33.1
93 670
33.0
112 100
32.9
133 080
32.8
35
52 120
25.5
64 680
25.4
79 350
25.4
96 410
25.4
116 100
25.4
138 690
25.3
164 430
25.3
193 580
25.3
45
44 660
31.4
56 390
31.3
69 990
31.2
85 720
31.1
103 830
31.1
124 600
31.0
148 270
31.0
175 120
30.9
55
-
-
-
-
59 500
38.6
73 480
38.5
89 600
38.4
108 130
38.3
129 360
38.2
153 530
38.1
35
52 110
24.4
64 770
24.4
79 540
24.4
96 670
24.3
116 390
24.3
138 970
24.4
164 630
24.7
193 640
25.1
45
44 990
30.3
56 640
30.5
70 150
30.5
85 780
30.5
103 780
30.4
124 400
30.3
147 880
30.4
174 490
30.5
55
-
-
-
-
59 830
38.3
73 680
38.3
89 670
38.2
108 060
38.1
129 120
38.0
153 090
37.9
35
59 270
28.2
73 550
28.3
90 220
28.4
109 540
28.4
131 790
28.4
157 250
28.4
186 210
28.5
218 930
28.8
45
51 310
34.7
64 490
34.9
79 780
35.0
97 470
35.0
117 850
35.0
141 180
35.0
167 770
35.0
197 880
35.0
55
-
-
-
-
67 960
43.4
83 610
43.5
101 700
43.5
122 530
43.4
146 370
43.3
173 540
43.2
35
66 430
32.0
82 340
32.2
100 890
32.3
122 410
32.4
147 190
32.4
175 540
32.4
207 780
32.4
244 210
32.4
45
57 640
39.0
72 340
39.3
89 410
39.5
109 160
39.6
131 910
39.6
157 970
39.5
187 650
39.5
221 270
39.4
55
-
-
-
-
76 080
48.5
93 530
48.6
113 730
48.7
136 990
48.6
163 630
48.6
193 990
48.4
35
80 260
37.4
99 250
37.4
121 370
37.5
147 000
37.7
176 510
37.8
210 290
38.0
248 720
38.1
292 170
38.1
45
70 000
46.0
87 420
45.9
107 600
45.9
130 930
46.0
157 790
46.2
188 570
46.5
223 650
46.7
263 420
46.8
55
-
-
-
-
91 850
56.7
112 350
56.7
136 040
56.8
163 310
57.0
194 580
57.2
230 230
57.4
Performance data for SH090-120-161-380 and corresponding tandem models are provisional data
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
Qo: Cooling capacity in W
Pe: Power input in kW
Superheat = 11.1 K
Subcooling = 8.3 K
Voltage: 400 V / 3 / 50 Hz
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
164
d.o.o.
Legend:
G R U P A
SH760-4
-20
Tc
SH - R410A
60 Hz PERFORMANCE DATA
To
Model
SH090-4
SH120-4
SH161-4
SH180-4
SH240-4
SH300-4
SH380-4
SH182-4
SH210-4
SH242-4
SH281-4
SH322-4
SH360-4
SH420-4
SH480-4
SH482-4
SH540-4
SH600-4
-15
-10
-5
0
5
10
15
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
Qo
Pe
35
11 800
5.4
14 690
5.5
18 050
5.6
21 940
5.7
26 440
5.8
31 590
5.9
37 450
6.0
44 100
6.1
45
10 340
6.7
12 990
6.7
16 060
6.8
19 620
6.9
23 720
7.0
28 430
7.1
33 800
7.2
39 890
7.3
55
-
-
-
-
13 830
8.4
16 980
8.5
20 620
8.5
24 820
8.6
29 630
8.7
35 120
8.8
35
16 010
7.2
19 930
7.3
24 490
7.4
29 760
7.5
35 840
7.7
42 790
7.8
50 710
8.1
59 660
8.3
45
13 990
8.8
17 630
8.9
21 820
9.0
26 640
9.1
32 180
9.2
38 520
9.4
45 740
9.5
53 910
9.8
55
-
-
-
-
18 730
11.1
23 050
11.1
28 010
11.2
33 680
11.3
40 150
11.5
47 490
11.6
35
21 390
9.2
26 330
9.3
32 080
9.5
38 740
9.6
46 420
9.7
55 210
9.9
65 220
10.1
76 560
10.3
45
18 740
11.4
23 260
11.5
28 510
11.6
34 590
11.7
41 590
11.8
49 630
11.9
58 800
12.1
69 220
12.2
55
-
-
-
-
24 480
14.3
29 850
14.4
36 070
14.5
43 240
14.6
51 460
14.7
60 830
14.8
35
24 030
10.8
29 730
10.8
36 350
10.9
44 030
10.9
52 900
10.9
63 090
10.9
74 730
10.9
87 960
10.9
45
20 280
13.5
25 600
13.5
31 740
13.5
38 820
13.5
46 970
13.5
56 340
13.6
67 050
13.6
79 230
13.6
55
-
-
-
-
26 960
16.8
33 350
16.7
40 710
16.7
49 160
16.7
58 850
16.7
69 900
16.7
35
32 870
14.5
40 560
14.6
49 510
14.6
59 880
14.7
71 820
14.7
85 500
14.8
101 070
15.0
118 700
15.3
45
28 840
17.9
35 880
18.0
44 040
18.1
53 470
18.2
64 330
18.3
76 790
18.3
91 000
18.4
107 130
18.5
55
-
-
-
-
38 010
22.5
46 350
22.6
55 980
22.7
67 060
22.7
79 760
22.8
94 230
22.9
35
40 840
19.1
50 620
19.3
62 000
19.4
75 200
19.5
90 390
19.6
107 800
19.7
127 620
19.8
150 060
20.0
45
35 730
23.2
44 700
23.4
55 100
23.6
67 130
23.7
81 000
23.8
96 900
23.8
115 030
23.9
135 610
24.0
55
-
-
-
-
47 350
28.8
57 970
28.9
70 260
29.0
84 410
29.1
100 620
29.1
119 100
29.1
35
48 760
22.6
60 230
22.7
73 640
22.9
89 230
23.0
107 250
23.2
127 950
23.4
151 580
23.8
178 390
24.3
45
42 710
27.5
53 170
27.7
65 360
27.8
79 540
27.9
95 960
28.0
114 860
28.2
136 480
28.4
161 090
28.8
55
-
-
-
-
56 080
34.0
68 560
34.1
83 070
34.2
99 870
34.3
119 210
34.5
141 320
34.7
35
23 250
10.8
28 930
11.0
35 550
11.2
43 230
11.4
52 080
11.6
62 220
11.8
73 780
12.1
86 870
12.3
45
20 370
13.3
25 590
13.5
31 640
13.7
38 650
13.8
46 730
14.0
56 000
14.2
66 580
14.4
78 590
14.6
55
-
-
-
-
27 240
16.8
33 450
16.9
40 630
17.1
48 890
17.3
58 370
17.4
69 180
17.6
35
27 390
12.6
34 090
12.8
41 900
13.0
50 930
13.2
61 340
13.5
73 260
13.8
86 840
14.1
102 200
14.5
45
23 970
15.5
30 160
15.6
37 310
15.8
45 560
16.0
55 060
16.2
65 940
16.5
78 340
16.8
92 400
17.1
55
-
-
-
-
32 070
19.5
39 430
19.6
47 900
19.8
57 620
20.0
68 730
20.2
81 370
20.4
35
31 530
14.3
39 260
14.5
48 240
14.7
58 630
15.0
70 600
15.3
84 300
15.7
99 890
16.1
117 530
16.6
45
27 570
17.6
34 720
17.8
42 980
17.9
52 480
18.2
63 400
18.4
75 890
18.7
90 110
19.1
106 210
19.5
55
-
-
-
-
36 890
22.1
45 410
22.3
55 170
22.4
66 350
22.6
79 090
22.9
93 560
23.2
35
36 840
16.4
45 570
16.6
55 720
16.8
67 480
17.1
81 020
17.4
96 530
17.8
114 190
18.1
134 180
18.6
45
32 240
20.2
40 280
20.3
49 570
20.5
60 310
20.8
72 670
21.0
86 830
21.3
102 970
21.6
121 290
22.0
55
-
-
-
-
42 560
25.4
52 110
25.5
63 120
25.7
75 760
25.9
90 230
26.1
106 700
26.4
35
42 140
18.4
51 870
18.7
63 200
18.9
76 320
19.2
91 440
19.5
108 760
19.8
128 490
20.2
150 820
20.6
45
36 910
22.7
45 830
22.9
56 170
23.1
68 140
23.3
81 930
23.6
97 770
23.8
115 840
24.1
136 360
24.5
55
-
-
-
-
48 230
28.7
58 810
28.8
71 060
28.9
85 180
29.1
101 370
29.3
119 830
29.6
35
47 330
21.5
58 570
21.7
71 620
21.8
86 750
21.8
104 210
21.9
124 280
21.9
147 210
21.8
173 270
21.8
45
39 950
27.1
50 440
27.1
62 530
27.1
76 470
27.1
92 540
27.1
110 990
27.1
132 080
27.2
156 080
27.3
55
-
-
-
-
53 120
33.6
65 710
33.5
80 200
33.3
96 850
33.3
115 930
33.3
137 690
33.5
35
56 040
25.2
69 240
25.4
84 580
25.5
102 360
25.6
122 850
25.7
146 360
25.8
173 160
25.9
203 550
26.2
45
48 380
31.4
60 560
31.6
74 640
31.7
90 900
31.7
109 640
31.8
131 130
31.9
155 680
32.0
183 560
32.2
55
-
-
-
-
64 000
39.3
78 510
39.4
95 240
39.4
114 480
39.4
136 530
39.5
161 660
39.6
35
63 890
29.9
79 140
30.1
96 880
30.3
117 440
30.4
141 140
30.5
168 330
30.6
199 320
30.8
234 440
31.0
45
55 170
36.7
69 250
36.9
85 540
37.1
104 360
37.2
126 050
37.3
150 940
37.4
179 350
37.5
211 620
37.6
55
-
-
-
-
73 200
45.6
89 960
45.7
109 310
45.7
131 570
45.7
157 080
45.7
186 160
45.8
35
64 750
28.9
79 910
29.1
97 540
29.2
117 960
29.3
141 490
29.5
168 430
29.7
199 110
30.0
233 830
30.5
45
56 820
35.7
70 690
36.0
86 750
36.3
105 330
36.4
126 730
36.5
151 280
36.6
179 270
36.8
211 040
37.0
55
-
-
-
-
74 880
45.0
91 310
45.2
110 280
45.4
132 110
45.5
157 130
45.6
185 630
45.7
35
72 600
33.6
89 810
33.8
109 850
34.0
133 050
34.2
159 780
34.3
190 400
34.5
225 260
34.8
264 720
35.3
45
63 610
41.0
79 380
41.4
97 650
41.7
118 790
41.9
143 150
42.0
171 080
42.1
202 950
42.3
239 100
42.5
55
-
-
-
-
84 080
51.3
102 760
51.6
124 350
51.7
149 200
51.8
177 680
51.9
210 130
52.0
35
80 450
38.2
99 720
38.5
122 150
38.8
148 130
39.0
178 080
39.1
212 370
39.3
251 420
39.6
295 610
40.0
45
70 400
46.3
88 070
46.8
108 550
47.1
132 250
47.3
159 570
47.5
190 890
47.6
226 620
47.8
267 160
48.0
55
-
-
-
-
93 270
57.6
114 210
57.9
138 420
58.0
166 290
58.1
198 230
58.1
234 630
58.1
35
97 520
45.2
120 460
45.5
147 270
45.7
178 450
46.0
214 500
46.3
255 900
46.9
303 160
47.6
356 780
45
85 420
54.9
106 340
55.3
130 730
55.6
159 090
55.8
191 920
56.1
229 710
56.4
272 970
56.8
322 180
55
-
-
-
-
112 160
67.9
137 120
68.2
166 150
68.4
199 750
68.7
238 410
69.0
282 650
Performance data for SH090-120-161-380 and corresponding tandem models are provisional data
To: Evaporating temperature in °C
Tc: Condensing temperature in °C
Qo: Cooling capacity in W
Pe: Power input in kW
Superheat = 11.1 K
Subcooling = 8.3 K
Voltage: 460 V / 3 / 60 Hz
48.6
57.5
69.4
d.o.o.
Legend:
G R U P A
SH760-4
-20
Tc
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
Scroll compressors
165
CODE NUMBERS
code numbers for industrial packs
Compressor
model
Connections
Motor
protection
3
Brazed
Brazed
Brazed
Brazed
Brazed
Rotolock
Rotolock
Brazed
Brazed
Rotolock
Rotolock
Brazed
Brazed
Rotolock
Rotolock
Brazed
Brazed
Rotolock
Rotolock
Internal
Internal
Internal
M24
M230
M24
M230
M24
M115-230
M24
M115-230
M24
M115-230
M24
M115-230
M24
M115-230
M24
M115-230
120H0002
120H0012
120H0022
120H0032
120H0034
120H0036
120H0038
120H0064
120H0066
120H0071
120H0073
120H0108
120H0110
120H0115
120H0117
120H0152
120H0154
120H0156
120H0158
400/3/50
460/3/60
120H0004
120H0014
120H0024
120H0040
120H0042
120H0044
120H0046
120H0075
120H0077
120H0082
120H0084
120H0119
120H0121
120H0126
120H0128
120H0160
120H0162
120H0164
120H0166
Brazed
Brazed
Brazed
Brazed
Brazed
Rotolock
Rotolock
Brazed
Brazed
Rotolock
Rotolock
Brazed
Brazed
Rotolock
Rotolock
Internal
Internal
Internal
M24
M230
M24
M230
M24
M115-230
M24
M115-230
M24
M115-230
M24
M115-230
120H0001
120H0011
120H0021
120H0031
120H0033
120H0035
120H0037
120H0063
120H0065
120H0070
120H0072
120H0107
120H0109
120H0114
120H0116
120H0003
120H0013
120H0023
120H0039
120H0041
120H0043
120H0045
120H0074
120H0076
120H0081
120H0083
120H0118
120H0120
120H0125
120H0127
200-230/3/60
SH090
SH120
SH161
SH180
SH240
SH300
SH380
4
6
230/3/50
120H0006
120H0016
120H0026
-
7
9
500/3/50
575/3/60
120H0008
120H0018
120H0028
120H0048
120H0050
120H0052
120H0054
120H0086
120H0088
120H0093
120H0095
120H0130
120H0132
120H0137
120H0139
120H0168
120H0170
120H0172
120H0174
120H0010
120H0020
120H0030
120H0056
120H0058
120H0060
120H0062
120H0097
120H0099
120H0104
120H0106
120H0141
120H0143
120H0148
120H0150
120H0176
120H0178
120H0180
120H0182
120H0007
120H0017
120H0027
120H0047
120H0049
120H0051
120H0053
120H0085
120H0087
120H0092
120H0094
120H0129
120H0131
120H0136
120H0138
120H0009
120H0019
120H0029
120H0055
120H0057
120H0059
120H0061
120H0096
120H0098
120H0103
120H0105
120H0140
120H0142
120H0147
120H0149
380/3/60
code numbers for single packs
SH090
SH120
SH161
SH180
SH240
SH300
SH380
120H0005
120H0015
120H0025
-
Brazed
M24
120H0151
120H0159
-
120H0167
120H0175
Brazed
M115-230
120H0153
120H0161
-
120H0169
120H0177
Rotolock
M24
120H0155
120H0163
-
120H0171
120H0179
Rotolock
M115-230
120H0157
120H0165
-
120H0173
120H0181
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
166
OPTYMATM condensing units
Danfoss OPTYMATM condensing units perfectly suit applications like:
·
·
·
·
·
Cold stores and freezer rooms
Beer and wine cellars
Small food retail and mini markets
Garage forecourt shops
Display cabinets
The optimum range of low-noise condensing units
for quick installation
Based on many years of experience, we have developed a complete range of hermetic condensing units that meet even the
highest standards.
OPTYMA condensing units are unique integral condensing units
built around Danfoss components.
With specially-designed single fan units and a compressor platform for low temperatures, OPTYMA condensing units include
features like high COP, low noise levels and energy consumption
and a wide application range, as well as simple installation and
maintenance.
·
·
·
·
Ice cream freezers
Bottle coolers
Air driers
Residential air conditioning
The OPTYMA range is available for refrigerants R134a, R404A, R507
and R407C. Capacity ranges from 0 to 20.000 Watt (R134a). All
units are fully wired and factory tested, reducing commissioning
time on site.
Installation is effortless: just mount the unit, switch on the current,
and the cooling process is up and running.
Product advantages
Customer benefits
· Energy-efficient
· Integrated Danfoss design
· Low energy consumption
· Outstanding performance, even in the toughest applications
· Electrical box: IP 54
· Low noise levels
· Small dimensions
· Built-in grab for easier handling on site
· Base plate design allow easy mounting on wall brackets
· Easy access to all components for improved serviceability
and simplified maintenance
· A minimal footprint, enabling installation in small spaces
without compromising unit performance or service accessibility
· Common Danfoss components, all stocked locally by
wholesalers
· Low noise operation
· Reliable, high ambient operation and proven reliability in
the most demanding applications
· Energy saving benefits with fan speed control and selection of energy-efficient components
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
167
OP-LCHC004
OP-LCHC006
OP-LCHC008
OP-LCHC007
OP-LCHC010
OP-LCHC012
OP-LCHC015
OP-LCHC018
OP-LCHC021
OP-LCHC026
OP-LCHC034
TL
FR
FR
NL
SC
SC
SC
SC
SC
GS
GS
OP-LCHC048
NT
OP-LCHC068
NT
OP-LCHC096
NT
OP-LCHC108
NT
OP-LCHC136
NT
OP-LCHC215
NT
OP-LCHC271
NT
OP-LGHC048
NT
OP-LGHC068
NT
OP-LGHC096
NT
OP-LGHC108
NT
OP-LGHC136
NT
OP-LGHC215
NT
OP-LGHC271
NT
Test condition
EN 13215
Ambient temperature
Suction gas temperature
Version
A00
114X1208
114X1216
114X1324
114X1328
114X1332
114X1440
114X1548
114X1556
114X1564
114X1672
114X1780
A01
114X1209
114X1217
114X1325
114X1329
114X1333
114X1441
114X1549
114X1557
114X1565
114X1673
114X1781
A02
114X5044
114X5030
114X5037
114X5045
114X5031
114X5038
114X5032
114X5039
114X5033
114X5040
114X5034
114X5041
114X5035
114X5042
114X5036
114X5043
114X5096
114X5089
114X5097
114X5083
114X5090
114X5084
114X5091
114X5085
114X5092
114X5086
114X5093
114X5087
114X5094
114X5088
114X5095
RGT 20
Constant suction gas temperature
32°C
20°C
= 10K superheat
A04
114X1211
114X1219
114X1327
114X1331
114X1335
114X1443
114X1551
114X1559
114X1567
114X1675
114X1783
G
G
G
G
G
G
G
G
G
G
G
G
D
E
G
D
E
D
E
D
E
D
E
D
E
D
E
G
E
G
D
E
D
E
D
E
D
E
D
E
D
E
Condenser
fan
Int.
Fan blade
Airflow
Type
volume
∅
[m3/h]
[dm3]
[mm]
BG2
231
0.25
1 × 200
BG2
231
0.25
1 × 200
BG3
518
0.31
1 × 230
BG3
518
0.31
1 × 230
BG3
518
0.31
1 × 230
BG4
631
0.40
1 × 254
BG5
583
0.53
1 × 254
BG5
583
0.53
1 × 254
BG5
583
0.53
1 × 254
BG6
1150
0.63
1 × 300
BG7
990
0.84
1 × 300
Condenser coil
Electrical
code
Unit
Platform
RGT20
CECOMAF
Test
conditions
OPTYMA™ condensing unit R404A/R507 LBP
HP
¼
⁄
1 ⁄3
1 ⁄3
½
½
5 ⁄8
¾
7⁄8
1
1½
1 3
Cooling capacity in [W] at
evaporating temperature °C
-45
64
91
130
126
-40
85
128
161
175
220
292
349
405
500
650
-35
110
171
208
234
216
320
400
475
535
670
850
-30
141
219
268
302
300
429
521
610
680
860
1.100
-25
177
273
340
380
393
547
654
751
840
1.070
1.350
129
198
232
291
350
450
2½
A4
1.200
1.2
1 × 300
513
831
1.186
1.388
1.775
3½
C4
2.150
2.3
1 × 350
730
1.121
1.629
2.193
2.834
5
D4
2.000
3.1
1 × 350
1.474
2.083
2.771
3.567
5½
E4
3.150
2.5
1 × 400
1.630
2.390
3.332
4.297
7
G4
3.150
4.1
1 × 400
2.375
3.222
4.307
5.437
10
J4
6.000
4.4
1 × 500
2.407
3.565
4.910
6.588
8.308
13
L4
5.850
6.3
1 × 500
3.488
4.988
6.726
8.901 11.092
2½
C3
1.450
1.6
2 × 254
509
828
1.185
1.389
1.780
3½
D3
2.800
1.5
2 × 300
711
1.096
1.595
2.147
2.773
5
E3
2.100
2.2
2 × 300
1.485
2.103
2.806
3.622
5½
G3
4.600
2.3
2 × 355
1.605
2.345
3.253
4.172
7
H3
3.600
4.7
2 × 355
2.449
3.415
4.472
5.678
10
L3
9.000
5.1
2 × 450
2.396
3.551
4.891
6.563
8.274
13
L3
8600
5.1
2 × 450
3.553
5.098
6.897
9.169 11.492
CECOMAF
Household & similar
32°C
32°C
Version
A00 Without valves and receiver for capillary tubes
A01 With receiver. 2 stop valves. bracket and copper pipes for KP
A02 With receiver, stop valves, universal pressure switch
(KP17WB), flexible hoses and electrical box
A04 A01 + KP 17WB + FSA-Kit + power cord (except LCHC034)
Electrical characteristics
Unit
Contactor
CI 6
CI 9
CI 12
CI 12
CI 15
CI 25
CI 30
CI 6
CI 9
CI 12
CI 12
CI 15
CI 25
CI 30
MCC compressor [A]
230 V/
Overload relay
1 phase
TI 16C
11
TI 16C
17
TI 16C
TI 16C
TI 16C
TI 25C
TI 30C
TI 16C
11
TI 16C
17
TI 16C
TI 16C
TI 16C
TI 25C
TI 30C
-
Contactor
Overload relay
CI 12
CI 15
CI 12
CI 20
-
-
TI 16C
TI 16C
TI 16C
TI 25C
-
MCC Fan [A]
400 V/
230 V/
3 phase
1 phase
0.19
0.19
0.25
0.25
0.25
0.39
0.39
0.39
0.39
0.75
0.75
0.35
0.85
0.5
1.2
0.5
1.2
0.7
1.3
0.7
1.3
1.2
3.4
1.2
3.4
2x0.32
2x0.35
2x0.85
2x0.35
2x0.85
2x0.5
2x1.2
2x0.5
2x1.2
2x1.2
2x1.7
2x1.2
2x1.7
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
168
d.o.o.
400 V/
3 phase
4.8
8.4
10.1
12.1
14.3
22.3
27
4.8
8.4
10.1
12.1
14.3
22.3
27
G R U P A
OP-LCHC004
OP-LCHC006
OP-LCHC008
OP-LCHC007
OP-LCHC010
OP-LCHC012
OP-LCHC015
OP-LCHC018
OP-LCHC021
OP-LCHC026
OP-LCHC034
OP-LCHC048
OP-LCHC068
OP-LCHC096
OP-LCHC108
OP-LCHC136
OP-LCHC215
OP-LCHC271
OP-LGHC048
OP-LGHC068
OP-LGHC096
OP-LGHC108
OP-LGHC136
OP-LGHC215
OP-LGHC271
LRA compressor [A]
400 V/
230 V/
3 phase
1 phase
5.7
9
10
10.4
14.8
18.6
21.8
23.5
23.4
25.7
26.6
16
37
25
53
32
45
51
74
96
16
25
32
45
51
74
96
-
Dist. Suction
b
line
[mm]
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
385 12 mm
385 12 mm
-15
265
397
508
563
609
804
955
1.052
1.202
1.525
1.900
-10
318
468
599
667
730
943
1.122
1.212
1.407
1.770
2.200
2.186
2.614
3.054
935
3
5
402
500
600
400
465
5 8
3.544
4.317
5.139
1.478
6
5
555
630
650
400
595
5 8
4.461
5.442
6.499
1.851
6
5
555
630
650
400
595
7 8
5.328
6.399
7.500
2.274
6
5
605
630
650
400
595
7 8
6.685
8.030
9.466
3.029
8
5
656
755
700
400
720
10.169 12.158 14.229
4.814
14
5
708
900
900
600
6.312
14
5
759
900
900
46°C: -20°C till -35°C
43°C: -15°C till -40°C
0.8
0.8
1.1
1.1
1.1
1.1
1.1
1.1
1.1
2.4
2.4
Weight
[kg]
Liquid
line
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
10 mm
10 mm
Compressor
Dimensions
[mm]
Fig. Height Width Length Dist.
H
W
D
a
[mm] [mm] [mm] [mm]
1
226
304
432
310
2
226
304
432
310
2
256
321
444
325
3
256
321
444
325
4
256
321
444
325
4
296
331
451
325
4
296
331
473
325
4
296
331
513
365
4
296
331
513
365
7
340
430
480
310
7
340
430
480
310
-20
218
332
420
497
496
672
799
899
1.014
1.290
1.625
13.431 15.900 18.435
-5
378
542
692
779
860
1.088
1.298
1.379
Receiver
volume [l]
Power
consumption
[W] at evap.
temp.
-25°C -35°C
162
38°C: -45°C till -5°C
38°C: -45°C till -10°C 267
38°C: -45°C till -10°C 336
38°C: -45°C till -10°C 336
38°C: -45°C till -10°C
373
38°C: -45°C till -15°C 479
38°C: -45°C till -10°C
558
38°C: -45°C till -15°C
649
38°C: -45°C till -15°C
754
38°C: -45°C till -23.3°C 1.023
38°C: -45°C till -23.3°C 1.170
Application range
[°C]
A00
12.0
15.1
15.5
15.5
15.5
19.8
21.1
21.1
21.1
36
39
A01 A02 A04
13.8
17.8
TL4CLX
16.7
17.8
FR6CLX
17.9
18.9 FR8.5CLX
17.9
18.9
NL7CLX
17.9
18.9 SC10CLX
22.0
22.9 SC12CLX
23.4
24.2 SC15CLX
23.4
24.2 SC18CLX
23.4
24.2 SC21CLX
39
40.5 GS26CLX
42
43.5 GS34CLX
⁄"
3 8
⁄"
54
NTZ048
⁄"
½"
64
NTZ068
⁄"
½"
78
NTZ096
⁄"
½"
92
NTZ108
7 8
⁄"
½"
95
NTZ136
865
1 1 ⁄8 "
5 8
⁄"
151
NTZ215
600
865
1 1 ⁄8 "
5 8
⁄"
166
NTZ271
⁄"
3 8
⁄"
55
NTZ048
⁄"
½"
62
NTZ068
⁄"
½"
78
NTZ096
⁄"
½"
102
NTZ108
2.196
2.629
3.079
998
3
6
392
700
500
300
660
5 8
3.463
4.210
5.009
1.487
6
6
442
800
600
400
760
5 8
4.548
5.570
6.677
1.869
6
6
442
800
600
400
760
7 8
5.139
6.135
7.132
2.267
8
6
555
1000
700
460
960
7 8
7.020
8.496 10.080
3.130
8
6
555
1000
700
460
960
7 8
⁄"
½"
107
NTZ136
10.124 12.092 14.156
4.413
14
6
671
1200
800
500
1160
11⁄8"
5 8
⁄"
152
NTZ215
14.018 16.696 19.517
6.512
14
6
671
1200
800
500
1160
11⁄8"
5 8
⁄"
158
NTZ271
Electrical Code
A Compressor 220 V/1 phase/50+60 Hz, fan 220 V/1 phase/50+60 Hz
D Compressor 400 V/3 phase/50 Hz, fan 400 V/3 phase/50 Hz
Platform GS: Preliminary data
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 220 V/1 phase/50 Hz, fan 220 V/1 phase/50 Hz
Automatic controls
Unit
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
Orifice
-10°C +5°C
0X
0X
0X
0X
0X
0X
00
00
00
00
00
0X
0X
00
00
00
01
01
01
01
01
01
To be selected depending
on your application
Filter drier Sight glass
type
type
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 10
SGN 10
SGN 10
SGN 12
SGN 12
SGN 12
SGN 12
SGN 16
SGN 16
SGN 10
SGN 12
SGN 12
SGN 12
SGN 12
SGN 16
SGN 16
Thermostat
type
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
Solenoid valve
type -25°C
EVR 3
EVR 3
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
EVR 3
EVR 3
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
Coil
code no.
Fan speed
controller type
Weatherproof
housing code no.
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4621
018F6701
118U4621
018F6701
118U4621
018F6701 RGE-Z1L4-7DS
118U8030
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8032
018F6701 RGE-Z1N4-7DS
118U8033
018F6701 RGE-Z1N4-7DS
118U8033
018F6701 RGE-Z1L4-7DS
7710017
018F6701 RGE-Z1L4-7DS
7710018
018F6701 RGE-Z1L4-7DS
7710018
018F6701 RGE-Z1L4-7DS
7710019
018F6701 RGE-Z1L4-7DS
7710019
018F6701 RGE-Z1N4-7DS
7710020
018F6701 RGE-Z1N4-7DS
7710020
The mentioned RGE are only suitable for 1 phase fans
d.o.o.
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 053
DML 084
DML 084
DML 084
DML 084
DML 165
DML 165
DML 053
DML 084
DML 084
DML 084
DML 084
DML 165
DML 165
Pressure
control type
G R U P A
OP-LCHC004
OP-LCHC006
OP-LCHC008
OP-LCHC007
OP-LCHC010
OP-LCHC012
OP-LCHC015
OP-LCHC018
OP-LCHC021
OP-LCHC026
OP-LCHC034
OP-LCHC048
OP-LCHC068
OP-LCHC096
OP-LCHC108
OP-LCHC136
OP-LCHC215
OP-LCHC271
OP-LGHC048
OP-LGHC068
OP-LGHC096
OP-LGHC108
OP-LGHC136
OP-LGHC215
OP-LGHC271
Expansion
valve type
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
169
CECOMAF
OP-MCHC004
OP-MCHC006
OP-MCHC007
OP-MCHC010
OP-MCHC012
OP-MCHC015
OP-MCHC018
OP-MCHC021
OP-MCHC026
OP-MCHC034
TL
FR
NF
SC
SC
SC
SC
GS
GS
GS
Version
A00
A01
114X2208
114X2316
114X2424
114X2532
114X2540
114X2648
114X2756
114X2764
114X2772
114X2880
114X2209
114X2317
114X2425
114X2533
114X2541
114X2649
114X2757
114X2765
114X2773
114X2881
RGT20
OP-MCHC048 MP
OP-MCHC054 MP
OP-MCHC060 MP
OP-MCHC068 MP
OP-MCZC086 MT
OP-MCZC096 MT
OP-MCZC108 MT
OP-MCZC121 MT
OP-MCZC136 MT
OP-MCZC171 MT
OP-MGZC215 MT
OP-MGZC242 MT
OP-MGZC271 MT
Test condition
Superheat 10K
EN 13215
Ambient temperature
32°C
Suction gas temperature
Subcooling within the limits of the condensing unit
A02
Condenser coil
HP
Type
A04
114X2211
114X2319
114X2427
114X2535
114X2543
114X2651
114X2759
114X2767
114X2775
114X2883
114X5322
114X5307
114X5312
114X5323
114X5308
114X5313
114X5324
114X5309
114X5314
114X5325
114X5310
114X5315
114X5311
114X5316
114X5029
114X5006
114X5018
114X5007
114X5019
114X5008
114X5020
114X5009
114X5021
114X5010
114X5022
114X5011
114X5023
114X5058
114X5073
114X5059
114X5074
114X5060
114X5075
OP-MCHC038 MP
SH10K
Electrical
code
Unit
Platform
Test
conditions
OPTYMA™ condensing unit R404A/R507 MBP
RGT20
Constant suction gas temp.
32°C
20°C
G
G
G
A
G
G
G
G
G
G
G
D
E
G
D
E
G
D
E
G
D
E
D
E
G
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
Condenser
fan
Int. volFan blade ∅
ume
[mm]
[dm3]
231
0.25
1 × 200
518
0.31
1 × 230
631
0.40
1 × 254
583
0.53
1 × 254
583
0.53
1 × 254
1.132
1.1
1 × 300
827
1.8
1 × 300
990
0.84
1 × 300
990
0.84
1 × 300
2.300
1.36
1 × 350
Airflow
[m3/h]
Cooling capacity in [W] at evaporating
temperature °C
-30
-25
-20
-15
-10
-5
604
715
893
1.062
1.165
1.275
1.900
265
428
577
736
863
1.081
1.287
1.410
1.575
2.350
314
511
688
884
1.027
1.290
1.538
1.665
1.870
2.800
377
603
810
1.046
1.205
1.519
1.816
1.925
2.175
3.250
¼
1⁄3
1⁄3
1⁄3
½
½
5⁄8
7⁄8
1
1½
BG2
BG3
BG4
BG5
BG5
BG6
BG7
BG7
BG7
BG8
1¾
B4
1.750
1.3
1 × 350
1.216 1.582 2.012 2.501 3.045 3.636
2
C4
2.150
2.3
1 × 350
1.662 2.187 2.782 3.440 4.149 4.905
2½
C4
2.150
2.3
1 × 350
1.763 2.343 2.998 3.715 4.487 5.299
3
D4
2.000
3.1
1 × 350
2.036 2.675 3.391 4.173 5.010 5.884
3½
E4
3.150
2.5
1 × 400
2.388 3.114 3.925 4.809 5.751 6.739
4½
F4
3.300
3.1
1 × 400
2.231 3.054 4.020 5.119 6.349 7.692
4¼
G4
3.150
4.1
1 × 400
2.316 3.222 4.291 5.520 6.900 8.423
5½
H4
4.300
4.1
1 × 500
2.914 3.969 5.215 6.653 8.277 10.080
6
J4
6.000
4.4
1 × 500
3.362 4.545 5.939 7.552 9.372 11.937
6½
K4
6.200
4.7
1 × 500
4.048 5.399 6.956 8.715 10.663 12.794
8½
L4
5.850
6.3
1 × 500
4.277 5.928 7.843 9.998 12.379 14.950
10
M4
11.000
7.4
2 × 500
6.040 8.107 10.539 13.348 16.512 20.030
12
M4
11.000
7.4
2 × 500
7.180 9.526 12.229 15.268 18.642 22.309
13½
N4
9.200
12.3
2 × 500
7.989 10.611 13.642 17.070 20.873 25.030
CECOMAF
Household & similar
32°C
32°C
Version
A00 Without valves and receiver for capillary tubes
A01 With receiver. 2 stop valves. bracket and copper pipes for KP
A02 With receiver, stop valves, universal pressure switch
(KP17WB), flexible hoses and electrical box
A04 A01 + KP 17WB + FSA-Kit + power cord (except MCHC034)
Electrical characteristics
Unit
Contactor
CI 9
CI 9
CI 9
CI 12
CI 12
CI 15
CI 15
CI 15
CI 20
CI 20
CI 25
CI 37
CI 37
CI 45
MCC compressor [A]
230 V/
1 phase
TI 16C
15
TI 16C
16
TI 16C
20
TI 16C
20
TI 16C
TI 16C
29
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
TI25C
TI 25C
TI 25C
-
Overload relay
Contactor
Overload relay
CI 16
CI 16
CI 20
CI 20
-
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
-
MCC Fan [A]
400 V/
230 V/
3 phase
1 phase
0.19
0.25
0.39
0.39
0.39
0.48
0.48
0.75
0.75
0.62
0.5
1.2
0.5
1.2
0.5
1.2
0.5
1.2
0.7
1.3
0.7
1.3
0.7
1.3
1.2
3.4
1.2
3.4
1.2
3.4
1.2
3.4
2x1.2
2x3.4
2x1.2
2x3.4
2x1.2
2x3.4
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
170
d.o.o.
400 V/
3 phase
6.3
6.3
6.4
8.5
9
11.5
12
14
17
19
22
27
30
36
G R U P A
OP-MCHC004
OP-MCHC006
OP-MCHC007
OP-MCHC010
OP-MCHC012
OP-MCHC015
OP-MCHC018
OP-MCHC021
OP-MCHC026
OP-MCHC034
OP-MCHC038
OP-MCHC048
OP-MCHC054
OP-MCHC060
OP-MCHC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
LRA compressor [A]
400 V/
230 V/
3 phase
1 phase
7.5
10.9
20.0
18.4
23.4
23.4
23.4
24.4
26.6
27.2
29.2
56
29.2
56
29.2
56
38.1
61
38.1
48.5
92
64
64
80
80
90
105
115
140
-
5
7.2
10
450
705
941
1.220
1.392
1.765
2.116
2.195
2.470
3.725
528
812
1.080
1.403
1.586
2.026
2.437
2.460
2.765
4.200
563
860
1.143
1.486
588
923
2.145
2.584
2.600
2.850
4.375
-10°C
5°C
38°C: -15°C till +10°C
38°C: -15°C till 0°C
38°C: -15°C till 0°C
38°C: -15°C till -5°C
38°C: -15°C till -6.7°C
38°C: -15°C till -5°C
38°C: -15°C till -5°C
38°C: -25°C till -10°C
38°C: -20°C till -10°C
38°C: -20°C till -10°C
284
502
624
728
890
1.145
1.235
1.250
1.500
2.220
0.8
1.1
1.1
1.1
1.1
1.1
1.1
1.6
1.6
2.4
1
2
3
4
4
4
4
7
7
8
Dimensions
[mm]
Fig.
Height Width Length Dist.
H
W
D
a
[mm] [mm] [mm] [mm]
226
304
432
310
256
321
444
325
296
331
451
325
296
321
473
325
296
321
473
325
350
442
610
370
350
442
610
370
340
430
480
310
340
430
480
310
450
500
600
310
Weight
[kg]
Dist. Suction
b
line
[mm]
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
385 16 mm
385 16 mm
470 16 mm
A00 A01 A02 A04
12.0
15.5
15.9
19.8
19.8
33.7
41.6
33.0
36.0
41.0
13.8
17.9
18.3
22.0
22.0
40.6
43.6
36.0
39.0
44.0
17.8
18.9
19.3
22.9
22.9
42.5
47.4
37.5
40.5
49.5
TL4DLX
FR6DLX
NF7MLX
SC10MLX
SC12MLX
SC15MLX
SC18MLX
GS21MLX
GS26MLX
GS34MLX
⁄"
56
MPZ038
⁄"
½"
64
MPZ048
⁄"
½"
65
MPZ054
⁄"
½"
68
MPZ061
⁄"
½"
72
MPZ068
⁄"
½"
95
MTZ51
⁄"
½"
100
MTZ57
7 8
⁄"
½"
113
MTZ65
865
11⁄8"
½"
127
MTZ73
600
865
11⁄8"
½"
140
MTZ81
900
600
865
11⁄8"
5 8
⁄"
162
MTZ100
1350
820
550
1.315
11⁄8"
5 8
⁄"
191
MTZ125
759
1350
820
550
1.315
11⁄8"
5 8
⁄"
194
MTZ144
759
1350
820
550
1.315
11⁄8"
5 8
⁄"
199
MTZ160
3
5
451
500
600
400
465
5 8
5.094 6.520 6.892 7.365
2.016
6
5
555
630
650
400
595
5 8
6.146 7.013 7.403 7.900
2.297
6
5
555
630
650
400
595
5 8
6.797 7.722 8.137 8.664
2.683
6
5
555
630
650
400
595
5 8
7.768 8.813 9.282 9.878
3.081
6
5
605
630
650
400
595
5 8
3.384
8
5
656
755
700
400
720
7 8
10.085 11.854 12.604 13.730
3.670
8
5
656
755
700
400
720
7 8
12.051 14.187 15.094 16.455
4.888
8
5
656
755
700
400
720
13.601 15.997 17.012 18.534
5.355
10
5
708
900
900
600
15.106 17.550 18.584 20.136
6.335
10
5
759
900
900
17.700 20.564 21.758 23.549
7.521
14
5
759
900
23.863 28.004 29.761 32.395
9.777
14
6
759
26.266 30.429 32.179 34.805
11.240
14
6
29.508 34.290 36.291 39.292
12.492
14
6
Electrical code
A Compressor 220 V/1 phase/50+60 Hz, fan 220 V/1 phase/50+60 Hz
D Compressor 400 V/3 phase/50 Hz, fan 400 V/3 phase/50 Hz
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
10 mm
10 mm
10 mm
3 8
1.502
43°C:-30°C till 0°C
46°C: -25°C till -5°C
Liquid
line
⁄"
4.270 4.948 6.141 7.660
9.146 10.682 11.330 12.301
Compressor
0
Receiver volume
[l]
Application range
[°C]
Power
consumption
[W] at evap.
temp.
Platform GS: Preliminary data
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 220 V/1 phase/50 Hz, fan 220 V/1 phase/50 Hz
Automatic controls
Unit
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
Orifice
-10°C +5°C
0X
0X
00
00
00
00
01
01
01
01
01
01
01
02
01
02
01
02
01
02
To be selected depending
on your application
Filter drier Sight glass
type
type
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 10
SGN 10
SGN 10
SGN 12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 16
SGN 16
SGN 16
SGN 16
Thermostat
type
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
Solenoid valve
type
-10°C
+5°C
EVR 3
EVR 3
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 10
EVR 10
EVR 10
EVR 10
Coil
code no.
Fan speed
Weatherproof
controller type housing code no.
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4620
018F6701
118U4621
018F6701
118U4621
018F6701
118U4621
018F6701
118U4621
018F6701
018F6701 RGE-Z1L4-7DS
118U8030
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8031
018F6701 RGE-Z1L4-7DS
118U8032
018F6701 RGE-Z1L4-7DS
118U8032
018F6701 RGE-Z1N4-7DS
118U8032
018F6701 RGE-Z1N4-7DS
118U8033
018F6701 RGE-Z1N4-7DS
118U8033
018F6701 RGE-Z1N4-7DS
118U8033
018F6701 RGE-Z1Q4-7DS
118U8034
018F6701 RGE-Z1Q4-7DS
118U8034
018F6701 RGE-Z1Q4-7DS
118U8034
The mentioned RGE are only suitable for 1 phase fans
d.o.o.
DML 052
DML 052
DML 052
DML 052
DML 052
DML 052
DML 052
DML 052
DML 052
DML 052
DML053
DML084
DML084
DML084
DML084
DML 084
DML 084
DML 084
DML 084
DML 084
DML 165
DML 165
DML 165
DML 165
Pressure
control type
G R U P A
OP-MCHC004
OP-MCHC006
OP-MCHC007
OP-MCHC010
OP-MCHC012
OP-MCHC015
OP-MCHC018
OP-MCHC021
OP-MCHC026
OP-MCHC034
OP-MCHC038
OP-MCHC048
OP-MCHC054
OP-MCHC060
OP-MCHC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
Expansion
valve type
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
171
SH10K
RGT20
OP-MGZD030
MT
OP-MGHD038
MP
OP-MGHD048
MP
OP-MGHD054
MP
OP-MGHD060
MP
OP-MGHD068
MP
OP-MGZD086
MT
OP-MGZD096
MT
OP-MGZD108
MT
OP-MGZD121
MT
OP-MGZD136
MT
OP-MGZD171
MT
OP-MGZD215
MT
OP-MGZD242
MT
OP-MGZD271
MT
Version
A02
114X5076
114X5046
114X5061
114X5341
114X5326
114X5331
114X5342
114X5327
114X5332
114X5343
114X5328
114X5333
114X5344
114X5329
114X5334
114X5330
114X5335
114X5081
114X5052
114X5067
114X5053
114X5068
114X5054
114X5069
114X5055
114X5070
114X5056
114X5071
114X5057
114X5072
114X5115
114X5118
114X5116
114X5119
114X5117
114X5120
Test condition
Superheat 10K
EN 13215
Ambient temperature
32°C
Suction gas temperature
Subcooling within the limits of the condensing unit
Electrical
code
Unit
Platform
Test
conditions
OPTYMA™ condensing unit R404A/R507 MBP –
G
F
E
G
D
E
G
D
E
G
D
E
G
D
E
D
E
G
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
special designed for areas with high ambient
Condenser
fan
Condenser coil
HP
Type
Airflow
[m3/h]
Int.
Fan blade ∅
volume
[mm]
3
[dm ]
Cooling capacity in [W] at evaporating
temperature °C
-30
-25
-20
-15
-10
-5
0
1½
C3
1.300
1.7
2 × 254
448
713
1.051
1.460
1.941
2.489
3.098
1¾
D3
2.800
1.5
2 × 300
1.253
1.645
2.113
2.651
3.258
3.909
4.612
2
E3
2.600
2.2
2 × 300
1.662
2.198
2.810
3.492
4.232
5.052
5.298
2½
E3
2.600
2.2
2 × 300
1.781
2.378
3.058
3.808
4.622
5.485
6.392
3
G3
4.600
2.3
2 × 355
2.117
2.795
3.561
4.423
5.361
6.384
7.477
3½
H3
3.600
4.7
2 × 355
2.507
3.301
4.200
5.194
6.269
7.447
8.700
4
H3
3.600
4.7
2 × 355
2.319
3.198
4.240
5.453
6.830
8.364 10.046
4¼
H3
3.600
4.7
2 × 355
2.370
3.310
4.422
5.717
7.184
8.824 10.620
5½
J3
5.400
4.7
2 × 400
3.005
4.113
5.429
6.972
8.740 10.728 12.932
6
J3
5.400
4.7
2 × 400
3.387
4.586
6.004
7.650
9.513 11.596 13.876
6½
L3
8.600
5.1
2 × 450
4.198
5.630
7.295
9.207 11.361 13.748 16.363
8½
M3
8.200
6.8
2 × 450
4.455
6.205
8.259 10.624 13.283 16.211 19.391
10
N4
9.200
12.3
2 × 500
6.234
8.384 10.937 13.894 17.266 21.026 25.174
12
N4
9.200
12.3
2 × 500
7.430
9.881 12.718 15.952 19.558 23.536 27.839
13½
U
14.000
14.3
2 × 600
8.239 10.995 14.199 17.878 22.021 26.604 31.624
RGT20
Constant suction gas temp.
32°C
20°C
Version
A00 Without valves and receiver for capillary tubes
A01 With receiver. 2 stop valves. bracket and copper pipes for KP
A02 With receiver, stop valves, universal pressure switch
(KP17WB), flexible hoses amd electrical box
A04 A01 + KP 17WB + FSA-Kit + power cord
Electrical characteristics
Unit
400 V/
3 phase
5
6.3
6.3
6.4
8.5
9
11.5
12
14
17
19
22
27
30
36
Contactor
CI 6
CI 9
CI 9
CI 9
CI 12
CI 12
CI 15
CI 15
CI 15
CI 20
CI 20
CI 25
CI 37
CI 37
CI 45
MCC compressor [A]
230 V/
1 phase
TI 16C
10
TI 16C
15
TI 16C
16
TI 16C
20
TI 16C
20
TI 16C
TI 16C
29
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
-
Overload relay
Contactor
Overload relay
CI 12
CI 16
CI 16
CI 20
CI 20
CI 30
-
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
-
MCC fan [A]
400 V/
230 V/
3 phase
1 phase
2x0.32
2x0.35
2x0.85
2x0.35
2x0.85
2x0.35
2x0.85
2x0.5
2x1.2
2x0.5
2x1.2
2x0.5
2x1.2
2x0.5
2x1.2
2x0.7
2x1.3
2x0.7
2x1.3
2x1.05
2x1.7
2x1.05
2x1.7
2x1.2
2x3.4
2x1.2
2x3.4
2x1.6
2x3.0
G R U P A
OP-MGZD030
OP-MGHD038
OP-MGHD048
OP-MGHD054
OP-MGHD060
OP-MGHD068
OP-MGZD086
OP-MGZD096
OP-MGZD108
OP-MGZD121
OP-MGZD136
OP-MGZD171
OP-MGZD215
OP-MGZD242
OP-MGZD271
LRA compressor [A]
400 V/
230 V/
3 phase
1 phase
20
40
29.2
56
29.2
56
29.2
56
38.1
61
38.1
48.5
92
64
64
80
80
90
105
115
140
-
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
172
Application range
[°C] at max.
ambient
temperature
Power consumption
[W] at evap. temp.
Dimensions
[mm]
Fig.
Height
H
[mm]
Width
W
[mm]
Length
D
[mm]
Dist.
a
[mm]
Dist.
b
[mm]
Suction
line
[inch]
Liquid
line
[inch]
Weight
[kg]
Compressor
5
10
-10°C
3.765
4.484
1.344
3
6
392
700
500
300
660
5 8
⁄
5 8
⁄
56
MTZ18
5.369
6.226
1.550
6
6
442
800
600
400
760
5 8
⁄
5 8
⁄
60
MPZ038
6.813
7.733
2.000
6
6
442
800
600
400
760
5 8
⁄
5 8
⁄
64
MPZ048
7.329
8.374
2.290
6
6
442
800
600
400
760
5 8
⁄
½
65
MPZ054
8.610
9.790
2.700
8
6
555
1.000
700
460
960
5 8
⁄
½
88
MPZ061
9.959 11.360
3.050
8
6
555
1.000
700
460
960
5 8
⁄
½
96
MPZ068
3.411
8
6
555
1.000
700
460
960
7 8
⁄
½
107
MTZ51
12.570 14.645
3.763
8
6
555
1.000
700
460
960
7 8
⁄
½
109
MTZ57
15.346 17.955
4.427
10
6
555
1.000
700
460
960
7 8
⁄
½
113
MTZ65
16.355 18.997
4.937
10
6
555
1.000
700
460
960
7 8
⁄
½
115
MTZ73
19.198 22.250
6.426
10
6
671
1.200
800
500
1.160
1 1 ⁄8
½
133
MTZ81
22.796 26.436
7.565
14
6
671
1.200
800
500
1.160
1 1 ⁄8
5 8
⁄
158
MTZ100
29.669 34.509
9.657
14
6
759
1.350
820
550
1.315
1 1 ⁄8
5 8
⁄
196
MTZ125
32.468 37.337
10.757
14
6
759
1.350
820
550
1.315
1 1 ⁄8
5 8
⁄
199
MTZ144
37.016 42.813
12.319
14
6
975
1.500
870
500
1.460
1 1 ⁄8
5 8
⁄
230
MTZ160
48°C: -30°C till -5°C
46°C: -25°C till 0°C
11.869 13.829
5°C
Receiver volume
[l]
temperature
Electrical code
A Compressor 220 V/1 phase/50+60 Hz, fan 220 V/1 phase/50+60 Hz
D Compressor 400 V/3 phase/50 Hz, fan 400 V/3 phase/50 Hz
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 220 V/1 phase/50 Hz, fan 220 V/1 phase/50 Hz
Automatic controls
Unit
Orifice
-10°C +5°C
To be selected depending
on your application
Filter drier Sight glass
type
type
DML 053
DML084
DML084
DML084
DML084
DML084
DML 084
DML 084
DML 084
DML 084
DML 084
DML 165
DML 165
DML 165
DML 165
SGN 10
SGN12
SGN12
SGN12
SGN12
SGN12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 12
SGN 16
SGN 16
SGN 16
SGN 16
Pressure
control type
Thermostat
type
KP 1/KP 7/KP 17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 1/KP 7/KP 17
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
Solenoid valve
type
-10°C
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 10
EVR 10
EVR 10
EVR 10
+5°C
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 10
EVR 10
EVR 10
EVR 10
EVR 10
EVR 15
EVR 15
EVR 15
Coil
Code no.
Fan speed
Weatherproof
controller type housing code no.
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
7710017
118U8036
118U8036
118U8036
118U8037
118U8037
7710019
7710019
7710019
7710019
7710020
7710020
118U8034
118U8034
7710021
G R U P A
OP-MGZD030
OP-MGHD038
OP-MGHD048
OP-MGHD054
OP-MGHD060
OP-MGHD068
OP-MGZD086
OP-MGZD096
OP-MGZD108
OP-MGZD121
OP-MGZD136
OP-MGZD171
OP-MGZD215
OP-MGZD242
OP-MGZD271
Expansion
valve type
d.o.o.
The mentioned RGE are only suitable for 1 phase fans
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
173
OP-UCGC003
OP-UCGC004
OP-UCGC005
OP-UCGC006
OP-UCGC007
OP-UCGC008
OP-UCGC010
OP-UCGC011
OP-UCGC012
OP-UCGC015
OP-UCGC018
OP-UCGC021
OP-UCGC026
OP-UCGC034
A00
A01
A04
Electrical code
Unit
114X0104
114X0108
114X0112
114X0200
114X0216
114X0224
114X0232
114X0336
114X0340
114X0448
114X0556
114X0564
114X0772
114X0780
114X0105
114X0109
114X0113
114X0201
114X0217
114X0225
114X0233
114X0337
114X0341
114X0449
114X0557
114X0565
114X0773
114X0781
114X0107
114X0111
114X0115
114X0203
114X0219
114X0227
114X0235
114X0339
114X0343
114X0451
114X0559
114X0567
114X0775
114X0783
G
G
G
G
G
G
G
G
G
G
G
G
G
G
Platform
Test
RGT
20
CECOMAF
conditions
OPTYMA™ condensing unit R134a LBP/MBP/HBP
TL
TL
TL
FR
FR
FR
FR
FR
SC
SC
SC
SC
GS
GS
Version
Test condition
EN 13125
Ambient temperature
Suction gas temperature
Subcooling within the limits of the condensing unit
Condenser
coil
HP
⁄
1⁄10
1 ⁄8
1 ⁄6
1⁄5
1⁄5
1⁄5
¼
1 ⁄3
3 ⁄8
½
5 ⁄8
¾
1
1 12
RGT 20
Constant suction gas temperature
32°C
20°C
OP-UCGC003
OP-UCGC004
OP-UCGC005
OP-UCGC006
OP-UCGC007
OP-UCGC008
OP-UCGC010
OP-UCGC011
OP-UCGC012
OP-UCGC015
OP-UCGC018
OP-UCGC021
OP-UCGC026
OP-UCGC034
Airflow
[m3/h]
BG1
BG1
BG1
BG2
BG2
BG2
BG2
BG3
BG3
BG4
BG5
BG5
BG7
BG7
243
243
243
231
231
231
231
518
518
631
583
583
990
990
Cooling capacity in [W] at evaporating
temperature °C
Int.
Fan blade ∅
volume
[mm]
-35
[dm3]
0.13
172
37
0.13
172
49
0.13
172
62
0.25
200
74
0.25
200
81
0.25
200
103
0.25
200
103
0.31
230
89
0.31
230
136
0.40
254
0.53
254
0.53
254
0.84
300
0.84
300
CECOMAF
Household and similar
32°C
32°C
-30
-25
-20
52
67
83
106
114
141
149
168
202
69
89
108
142
154
186
197
246
285
348
404
474
91
115
139
185
201
240
254
327
381
463
531
622
820
990
-15
-10
Version
A00 Without valves and receiver for capillary tubes
A01 With receiver. 2 stop valves. bracket and copper pipes for KP
A02 With receiver, stop valves, universal pressure switch
(KP17WB) and flexible hoses
A04 A01 + KP 17WB + FSA-Kit + power cord (except UCGC034)
LRA compressor
MCC fan
230 V/1 phase
230 V/1 phase
4.9
5.1
5.7
7.5
8.1
8.2
10
10
12.6
14.8
18.6
21.8
20.2
25.7
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.25
0.25
0.39
0.39
0.39
0.75
0.75
Unit
Expansion valve
type
OP-UCGC003
OP-UCGC004
OP-UCGC005
OP-UCGC006
OP-UCGC007
OP-UCGC008
OP-UCGC010
OP-UCGC011
OP-UCGC012
OP-UCGC015
OP-UCGC018
OP-UCGC021
OP-UCGC026
OP-UCGC034
TN 2/TEN 2
TN 2/TEN 2
TN 2/TEN 2
TN 2/TEN 2
TN 2/TEN 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TS 2/TES 2
TN 2/TEN 2
TN 2/TEN 2
TN 2/TEN 2
TN 2/TEN 2
TN 2/TEN 2
Orifice
-25°C
0X
0X
0X
0X
0X
0X
0X
0X
0X
0X
0X
00
00
00
-10°C
0X
0X
0X
0X
0X
0X
0X
0X
00
00
01
01
01
01
+5°C
0X
0X
0X
0X
00
00
00
00
01
01
01
02
02
02
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
174
-5
117
147
181
146
182
222
175
217
264
235
294
361
257
321
395
303
376
458
320
396
483
414
510
616
490
610
741
591
731
882
673
833 1.011
792
981 1.189
1.040 1.290 1.575
1.250 1.500 1.800
Automatic controls
Electrical characteristics
Unit
Type
Condenser
fan
Application
range
at 43°C
0
5
7.2
10
15
220
269
317
437
478
550
580
737
880
1.045
1.210
1.414
1.890
2.100
263
320
374
522
571
652
688
875
1029
1.220
1.432
1.652
2.230
2.450
282
309
377
436
617
674
762
805
359
439
502
1.185
1.405
1.682
1.902
1.349
1.603
1.962
2.160
344
401
532
615
699
737
1.095
1.221
1.538
1.759
2.390
2.600
Power
consumption Receiver
[W] at evap. volume
temp.
[l]
Sight glass
type
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 032
DML 052
DML 052
DML 052
DML 052
DML 053
DML 053
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 6
SGN 10
SGN 10
Fig.
Height
H
[mm]
Width
W
[mm]
Length
D
[mm]
Dist.
a
[mm]
1
1
1
2
2
2
2
2
4
4
4
4
7
7
197
197
197
226
226
226
226
256
256
296
296
296
340
340
289
289
289
304
304
304
304
321
321
331
331
331
430
430
410
410
410
432
432
432
432
444
444
451
473
513
480
480
310
310
310
310
310
310
310
325
325
325
325
365
310
310
-25°C
-35°C till +15°C
-35°C till +15°C
-35°C till +5°C
-35°C till +10°C
-35°C till +10°C
-35°C till +10°C
-35°C till +5°C
-35°C till +5°C
-35°C till +5°C
-35°C till +5°C
-35°C till +5°C
-35°C till 0°C
-20°C till +7.2°C
-20°C till +7.2°C
93
110
123
145
159
181
207
236
261
323
367
437
(-20°) 660
(-20°) 700
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.1
1.1
1.1
1.1
1.1
2.4
2.4
Electrical Code
A Compressor 220 V/1 phase/50+60 Hz, fan 220 V/1 phase/50+60 Hz
D Compressor 400 V/3 phase/50 Hz, fan 400 V/3 phase/50 Hz
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 220 V/1 phase/50 Hz, fan 220 V/1 phase/50 Hz
Filter drier
type
Dimensions
[mm]
Pressure
control
type
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
Thermostat
type
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
KP61/KP62
Suction Liquid
line
line
[mm]
[mm]
6
6
6
10
10
10
10
10
10
10
10
10
12
12
6
6
6
6
6
6
6
6
6
6
6
6
10
10
Weight
[kg]
Compressor
A00
A01
A04
11.4
11.4
11.4
13.2
13.2
13.2
14.2
14.2
14.2
15.1
13.2
17.8
15.1
15.1
15.1
16.7
16.7
16.7
17.8
17.8
17.8
15.2
17.6
18.6
15.5
19.8
19.8
21.1
17.9
22.0
23.4
23.4
18.9
22.9
24.2
24.2
31.5
33.0
34.5
36.0
36.0
37.5
TL3GX
TL4GX
TL5GX
FR6GX
FR7.5GX
FR8.5GX
FR10GX
FR11GX
SC12GX
SC15GX
SC18GX
SC21GX
GS26MFX
GS34MFX
Platform GS: Preliminary data
Solenoid valve
type
(excl. coil)
EVR 2
EVR 2
EVR 2
EVR 2
EVR 2
EVR 2
EVR 2
EVR 2
EVR 3-6 mm
EVR 3-6 mm
EVR 3-6 mm
EVR 3-6 mm
EVR 3-10 mm
EVR 3-10 mm
Coil
code no.
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
Fan speed
controller
type
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
Weatherproof
housing
code no.
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4620
118U4621
118U4621
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
175
SH10K
Unit
OP-MGZD030
MT
OP-MGZD038
MT
OP-MGZD048
MT
OP-MGZD054
MT
OP-MGZD060
MT
OP-MGZD068
MT
OP-MGZD086
MT
OP-MGZD096
MT
OP-MGZD108
MT
OP-MGZD121
MT
OP-MGZD136
MT
OP-MGZD171
MT
OP-MGZD215
MT
OP-MGZD242
MT
OP-MGZD271
MT
Version
A02
114X5076
114X5046
114X5061
114X5077
114X5047
114X5062
114X5078
114X5048
114X5063
114X5079
114X5049
114X5064
114X5080
114X5050
114X5065
114X5051
114X5066
114X5081
114X5052
114X5067
114X5053
114X5068
114X5054
114X5069
114X5055
114X5070
114X5056
114X5071
114X5057
114X5072
114X5115
114X5118
114X5116
114X5119
114X5117
114X5120
special designed for areas with high ambient temperature
Electrical code
Platform
Test conditons
OPTYMA™ condensing unit R134a –
G
F
E
G
D
E
G
D
E
G
D
E
G
D
E
D
E
G
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
Cooling capacity in [W] at evaporating
temperature °C
Condenser coil
HP
Type
Airflow
[m3/h]
Int.
volume
[dm3]
Fan blade ∅
[mm]
-15
-10
-5
0
5
1½
C3
1300
1.7
2 × 254
892
1.249
1.662
2.133
2.655
13⁄4
D3
2800
1.5
2 × 300
1.187
1.636
2.168
2.785
3.487
2
E3
2600
2.2
2 × 300
1.493
2.013
2.650
3.412
4.302
2½
E3
2600
2.2
2 × 300
1.725
2.330
3.057
3.914
4.898
3
G3
4600
2.3
2 × 355
2.389
3.094
3.920
4.871
5.951
3½
H3
3600
4.7
2 × 355
2.826
3.658
4.422
5.393
6.483
4
H3
3600
4.7
2 × 355
2.955
3.945
5.127
6.513
8.097
4½
H3
3600
4.7
2 × 355
3.534
4.722
6.134
7.773
9.636
5½
J3
5400
4.7
2 × 400
3.746
5.025
6.542
8.312 10.336
6
J3
5400
4.7
2 × 400
4.424
5.845
7.511
9.424 11.581
6½
L3
8600
5.1
2 × 450
5.302
6.934
8.842
11.043 13.536
8½
M3
8200
6.8
2 × 450
5.670
7.593
9.876
12.539 15.583
10
N4
9200
12.25
2 × 500
7.337
9.725
12.538 15.806 19.529
12
N4
9200
12.25
2 × 500
9.072
11.787 14.937 18.538 22.567
13½
U
14000
14.2
2 × 600
10.356 13.447 17.074 21.262 26.005
Version
A00 Without valves and receiver for capillary tubes
A01 With receiver. 2 stop valves. bracket and copper pipes for KP
A02 With receiver, stop valves, universal pressure switch
(KP17WB), flexible hoses and electrical box
A04 A01 + KP 17WB + FSA-Kit + power cord (except UCGC034)
Test condition
Superheat 10K
EN 13215
Ambient temperature
32°C
Suction gas temperature
Subcooling within the limits of the condensing unit
Electrical characteristics
LRA Compressor [A]
Unit
MCC Fan [A]
400 V/
3 phase
230 V/
1 phase
400 V/
3 phase
Contactor
Overload
relay
230 V/
1 phase
Contactor
Overload
relay
400 V/
3 phase
230 V/
1 phase
20
16
23
25
30
38
48.5
64
64
80
80
90
105
115
140
40
41
55
70
70
92
-
5
6
7.5
8
9
10
11.5
12
14
17
19
22
27
30
36
CI 6
CI 9
CI 9
CI 9
CI 12
CI 12
CI 15
CI 15
CI 15
CI 20
CI 20
CI 25
CI 37
CI 37
CI 45
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
10
15
16
20
20
29
-
CI 12
CI 16
CI 16
CI 20
CI 20
CI 30
-
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
-
2x0.35
2x0.35
2x0.35
2x0.5
2x0.5
2x0.5
2x0.5
2x0.7
2x0.7
2x1.05
2x1.05
2x1.2
2x1.2
2x1.6
2x0.32
2x0.85
2x0.85
2x0.85
2x1.2
2x1.2
2x1.2
2x1.2
2x1.3
2x1.3
2x1.7
2x1.7
2x3.4
2x3.4
2x3
G R U P A
OP-MGZD030
OP-MGZD038
OP-MGZD048
OP-MGZD054
OP-MGZD060
OP-MGZD068
OP-MGZD086
OP-MGZD096
OP-MGZD108
OP-MGZD121
OP-MGZD136
OP-MGZD171
OP-MGZD215
OP-MGZD242
OP-MGZD271
MCC Compressor [A]
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
176
Application range
at following
ambient
temperature
Power consumption
[W] at evap. temp.
5°C
Fig
Height
H
[mm]
Width
W
[mm]
Length
D
[mm]
Dist
a
[mm]
Dist
b
[mm]
Suction Liquid
line
line
[inch] [inch]
Weight
Compressor
[kg]
10
15
20
3.229
3.846
4.504
793
3
6
392
700
500
300
660
½
3 8
⁄
56
MTZ18
4.270
5.132
6.070
915
6
6
442
800
600
400
760
½
½
60
MTZ22
5.315
6.449
7.696
1101
6
6
442
800
600
400
760
½
½
64
MTZ28
6.007
7.238
8.571
1341
6
6
442
800
600
400
760
5 8
⁄
½
65
MTZ32
7.154
8.475
9.914
1619
8
6
555
1000
700
460
960
5 8
⁄
½
88
MTZ36
7.695
9.029
10.478
1735
8
6
555
1000
700
460
960
5 8
⁄
½
96
MTZ40
9.880
11.944 13.984
2636
8
6
555
1000
700
460
960
7 8
⁄
½
107
MTZ51
11.718 14.010 16.840
2378
8
6
555
1000
700
460
960
7 8
⁄
½
109
MTZ57
12.606 15.116 17.857
2636
10
6
555
1000
700
460
960
7 8
⁄
½
113
MTZ65
13.975 16.594 19.400
2896
10
6
555
1000
700
460
960
7 8
⁄
½
115
MTZ73
16.312 19.361 22.682
3907
10
6
671
1200
800
500
1160
11⁄8
½
133
MTZ81
18.995 22.761 26.876
4384
14
6
671
1200
800
500
1160
11⁄8
5 8
⁄
158
MTZ100
23.700 28.311 33.366
5392
14
6
759
1350
820
550
1315
11⁄8
5 8
⁄
196
MTZ125
27.005 31.831 36.938
6567
14
6
759
1350
820
550
1315
11⁄8
5 8
⁄
199
MTZ144
31.278 37.051 43.323
6982
14
6
975
1500
870
500
1460
11⁄8
5 8
⁄
230
MTZ160
46°C: -15°C till +15°C
48°C: -15°C till +10°C
-10°C
Dimensions [mm]
Receiver
volume
[l]
Electrical Code
A Compressor 220 V/1 phase/50+60 Hz, fan 220 V/1 phase/50+60 Hz
D Compressor 400 V/3 phase/50 Hz, fan 400 V/3 phase/50 Hz
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 220 V/1 phase/50 Hz, fan 220 V/1 phase/50 Hz
F Compressor 400 V/3 phase/50 Hz, fan 400 V/1 phase/50 Hz
Automatic controls
Unit
Expansion
valve
type
Orifice
Filter drier Sight glass
type
type
Thermostat
type
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
-10°C +5°C
OP-MCZC030
OP-MCZC038
OP-MCZC048
OP-MCZC054
OP-MCZC060
OP-MCZC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
To be selected depending
on your application
DML053
DML053
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML165
DML165
DML165
DML165
SGN10
SGN10
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN16
SGN16
SGN16
SGN16
Solenoid valve
type
-10°C
+5°C
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR6
EVR6
EVR6
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR6
EVR6
EVR6
EVR6
EVR6
EVR6
EVR10
EVR10
Coil
code number
Fan Speed
controller
type
Weatherproof
housing
type
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1N4-7DS
REG-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
118U8030
118U8030
118U8031
118U8031
118U8031
118U8031
118U8032
118U8032
118U8032
118U8033
118U8033
118U8033
118U8034
118U8034
118U8034
G R U P A
Pressure
control
type
d.o.o.
The mentioned RGE are only suitable for 1 phase fans
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
177
SH10K
Unit
OP-MCZC030
MT
OP-MCZC038
MT
OP-MCZC048
MT
OP-MCZC054
MT
OP-MCZC060
MT
OP-MCZC068
MT
OP-MCZC086
MT
OP-MCZC096
MT
OP-MCZC108
MT
OP-MCZC121
MT
OP-MCZC136
MT
OP-MCZC171
MT
OP-MGZC215
MT
OP-MGZC242
MT
OP- MGZC271
MT
Version
A02
114X5024
114X5000
114X5012
114X5025
114X5001
114X5013
114X5026
114X5002
114X5014
114X5027
114X5003
114X5015
114X5028
114X5004
114X5016
114X5005
114X5017
114X5029
114X5006
114X5018
114X5007
114X5019
114X5008
114X5020
114X5009
114X5021
114X5010
114X5022
114X5011
114X5023
114X5058
114X5073
114X5059
114X5074
114X5060
114X5075
Electrical code
Platform
Test conditons
OPTYMA™ condensing unit R134a
G
D
E
G
D
E
G
D
E
G
D
E
G
D
E
D
E
G
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
Condenser coil
HP
Condenser fan
Cooling capacity in [W] at evaporating
temperature °C
Type
Airflow
[m3/h]
Int.
volume
[dm3]
Fan blade ∅
[mm]
-15
-10
-5
0
5
1½
A4
1.200
1.2
1 × 300
867
1.210
1.604
2.045
2.529
1 3 ⁄4
B4
1.750
1.3
1 × 350
1.150
1.580
2.085
2.664
3.312
2
C4
2.150
2.3
1 × 350
1.477
1.986
2.606
3.344
4.197
2½
C4
2.150
2.3
1 × 350
1.700
2.289
2.995
3.818
4.757
3
D4
2.000
3.1
1 × 350
2.322
2.994
3.773
4.658
5.646
3½
E4
3.150
2.5
1 × 400
2.736
3.442
4.244
5.147
6.143
4
F4
3.300
3.1
1 × 400
2.833
3.770
4.881
6.159
7.601
4½
G4
3.150
4.1
1 × 400
3.174
4.232
5.480
6.913
8.527
5½
H4
4.300
4.1
1 × 500
3.637
4.863
6.311
7.976
9.860
6
J4
6.000
4.4
1 × 500
4.379
5.777
7.410
9.275
11.372
6½
K4
6.200
4.7
1 × 500
5.140
6.700
8.513
10.573 12.876
8½
L4
5.850
6.3
1 × 500
5.479
7.309
9.465
11.938 14.722
10
M4
11.000
7.4
2 × 500
7.169
9.492
12.213 15.352 18.896
12
M4
11.000
7.4
2 × 500
8.849
11.467 14.493 17.907 21.692
13½
N4
9.200
12.3
2 × 500
10.113 13.087 16.557 20.506 24.933
Version
A00 Without valves and receiver for capillary tubes
A01 With receiver. 2 stop valves. bracket and copper pipes for KP
A02 With receiver, stop valves, universal pressure switch
(KP17WB), flexible hoses and electrical box
A04 A01 + KP 17WB + FSA-Kit + power cord (except UCGC034)
Test condition
Superheat 10K
EN 13215
Ambient temperature
32°C
Suction gas temperature
Subcooling within the limits of the condensing unit
Electrical characteristics
LRA Compressor [A]
Unit
230 V/
1 phase
400 V/
3 phase
20
16
23
25
30
38
48.5
64
64
80
80
90
105
115
140
40
41
55
70
70
92
-
5
6
7.5
8
9
10
11.5
12
14
17
19
22
27
30
36
Contactor
Overload
relay
230 V/
1 phase
CI 6
CI 9
CI 9
CI 9
CI 12
CI 12
CI 15
CI 15
CI 15
CI 20
CI 20
CI 25
CI 37
CI 37
CI 45
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
10
15
16
20
20
29
-
MCC Fan [A]
Contactor
Overload
relay
400 V/
3 phase
230 V/
1 phase
CI 12
CI 16
CI 16
CI 20
CI 20
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
CI 30
-
TI 25C
-
0.35
0.5
0.5
0.5
0.5
0.7
0.7
0.7
1.2
1.2
1.2
1.2
2 x 1.2
2 x 1.2
2 x 1.2
0.85
1.2
1.2
1.2
1.2
1.3
1.3
1.3
3.4
3.4
3.4
3.4
2 x 3.4
2 x 3.4
2 x 3.4
G R U P A
OP-MCZC030
OP-MCZC038
OP-MCZC048
OP-MCZC054
OP-MCZC060
OP-MCZC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
MCC Compressor [A]
400 V/
3 phase
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
178
Application range
at following
ambient
temperature
Power consumption
[W] at evap. temp.
Height
H
[mm]
Width
W
[mm]
Length
D
[mm]
Dist
a
[mm]
Dist
b
[mm]
Suction Liquid
line
line
[inch] [inch]
Weight
Compressor
[kg]
15
20
3.050
3.603
4.177
736
3
5
402
500
600
400
465
½
3 8
⁄
54
MTZ18
4.025
4.799
5.620
909
3
5
451
500
600
400
465
½
3 8
⁄
56
MTZ22
5.162
6.233
7.391
1.092
6
5
555
630
650
400
595
½
½
64
MTZ28
5.803
6.951
8.176
1.333
6
5
555
630
650
400
595
5 8
⁄
½
65
MTZ32
6.734
7.898
9.134
1.529
6
5
555
630
650
400
595
5 8
⁄
½
68
MTZ36
7.233
8.412
9.663
1.687
6
5
605
630
650
400
595
5 8
⁄
½
72
MTZ40
2.109
8
5
656
755
700
400
720
7 8
⁄
½
95
MTZ51
10.314 12.234 14.277
2.297
8
5
656
755
700
400
720
7 8
⁄
½
100
MTZ57
11.953 14.220 16.640
3.056
8
5
656
755
700
400
720
7 8
⁄
½
113
MTZ65
13.679 16.197 18.865
3.304
10
5
708
900
900
600
865
11⁄8
½
127
MTZ73
15.419 18.153 21.052
4.100
10
5
759
900
900
600
865
11⁄8
½
140
MTZ81
17.810 21.136 24.667
4.224
14
5
759
900
900
600
865
11⁄8
5 8
⁄
162
MTZ100
22.838 27.178 31.833
5.419
14
6
759
1.350
820
550
1.315
11⁄8
5 8
⁄
191
MTZ125
25.825 30.206 34.785
6.624
14
6
759
1.350
820
550
1.315
11⁄8
5 8
⁄
194
MTZ144
29.776 35.038 40.590
7.025
14
6
759
1.350
820
550
1.315
11⁄8
5 8
⁄
199
MTZ160
9.197
10.910 12.728
5°C
Fig
10
46°C: -15°C till +10°C
43°C: -15°C till +15°C
-10°C
Dimensions [mm]
Receiver
volume
[l]
Electrical Code
A Compressor 220 V/1phase/50+60 Hz, fan 220 V/1phase/50+60 Hz
D Compressor 400 V/3phase/50 Hz, fan 400 V/3phase/50 Hz
E Compressor 400 V/3phase/50 Hz, fan 230 V/1phase/50 Hz
G Compressor 220 V/1phase/50 Hz, fan 220 V/1phase/50 Hz
Automatic controls
Unit
Orifice
Filter drier Sight glass
type
type
-10°C +5°C
To be selected depending
on your application
DML053
DML053
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML165
DML165
DML165
DML165
SGN10
SGN10
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN16
SGN16
SGN16
SGN16
Pressure
control
type
Thermostat
type
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
KP 61/EKC202
Solenoid valve
type
-10°C
+5°C
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR6
EVR6
EVR6
EVR3
EVR3
EVR3
EVR3
EVR3
EVR3
EVR6
EVR6
EVR6
EVR6
EVR6
EVR6
EVR10
EVR10
Coil
code number
Fan Speed
controller
type
Weatherproof
housing
type
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1N4-7DS
REG-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
118U8030
118U8030
118U8031
118U8031
118U8031
118U8031
118U8032
118U8032
118U8032
118U8033
118U8033
118U8033
118U8034
118U8034
118U8034
G R U P A
OP-MCZC030
OP-MCZC038
OP-MCZC048
OP-MCZC054
OP-MCZC060
OP-MCZC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
Expansion
valve
type
d.o.o.
The mentioned RGE are only suitable for 1 phase fans
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
179
SH10K
Unit
OP-MCZC030
MT
OP-MCZC038
MT
OP-MCZC048
MT
OP-MCZC054
MT
OP-MCZC060
MT
OP-MCZC068
MT
OP-MCZC086
MT
OP-MCZC096
MT
OP-MCZC108
MT
OP-MCZC121
MT
OP-MCZC136
MT
OP-MCZC171
MT
OP-MGZC215
MT
OP-MGZC242
MT
OP- MGZC271
MT
Version
A02
114X5024
114X5000
114X5012
114X5025
114X5001
114X5013
114X5026
114X5002
114X5014
114X5027
114X5003
114X5015
114X5028
114X5004
114X5016
114X5005
114X5017
114X5029
114X5006
114X5018
114X5007
114X5019
114X5008
114X5020
114X5009
114X5021
114X5010
114X5022
114X5011
114X5023
114X5058
114X5073
114X5059
114X5074
114X5060
114X5075
Electrical code
Platform
Test conditons
OPTYMA™ condensing unit R407C
Condenser coil
Condenser fan
Cooling capacity in [W] at
evaporating temperature °C
HP
G
D
E
G
D
E
G
D
E
G
D
E
G
D
E
D
E
G
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
D
E
Type
Airflow
[m3/h]
Int. volume
[dm3]
Fan blade ∅
[mm]
-15
-10
-5
0
1½
A4
1.200
1.2
1 × 300
1.161
1.620
2.134
2.700
1¾
B4
1.750
1.3
1 × 350
1.683
2.249
2.878
3.658
2
C4
2.150
2.3
1 × 350
2.149
2.925
3.794
4.746
2½
C4
2.150
2.3
1 × 350
2.596
3.405
4.296
5.266
3
D4
2.000
3.1
1 × 350
3.104
3.986
4.946
5.986
3½
E4
3.150
2.5
1 × 400
3.631
4.637
5.742
6.943
4
F4
3.300
3.1
1 × 400
3.965
5.186
6.549
8.048
4½
G4
3.150
4.1
1 × 400
4.366
5.765
7.341
9.089
5½
H4
4.300
4.1
1 × 500
5.342
6.891
8.659 10.646
6
J4
6.000
4.4
1 × 500
6.068
7.882
9.942 12.250
6½
K4
6.200
4.7
1 × 500
6.821
8.863 11.143 13.650
8½
L4
5.850
6.3
1 × 500
7.433
9.892 12.645 15.692
10
M4
11.000
7.4
2 × 500
11.007 14.191 17.757 21.713
12
M4
11.000
7.4
2 × 500
12.089 15.606 19.542 23.895
13½
N4
9.200
12.3
2 × 500
14.508 18.346 22.647 27.411
Version
A02 With receiver, stop valves, universal pressure switch
(KP17WB), flexible hoses and electrical box
Test condition
Superheat 10K
EN 13215
Ambient temperature
32°C
Suction gas temperature
Subcooling within the limits of the condensing unit
Electrical characteristics
LRA Compressor [A]
Unit
MCC Fan [A]
400 V/
3 phase
230 V/
1 phase
400 V/
3 phase
Contactor
Overload
relay
230 V/
1 phase
Contactor
Overload
relay
400 V/
3 phase
230 V/
1 phase
20
16
23
25
30
38
48.5
64
64
80
80
90
105
115
140
40
41
55
70
70
92
-
5
6
7.5
8
9
10
11.5
12
14
17
19
22
27
30
36
CI 6
CI 9
CI 9
CI 9
CI 12
CI 12
CI 15
CI 15
CI 15
CI 20
CI 20
CI 25
CI 37
CI 37
CI 45
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
TI 25C
10
15
16
20
20
29
-
CI 12
CI 16
CI 16
CI 20
CI 20
TI 16C
TI 16C
TI 16C
TI 25C
TI 25C
CI 30
-
TI 25C
-
0.35
0.5
0.5
0.5
0.5
0.7
0.7
0.7
1.2
1.2
1.2
1.2
2 x 1.2
2 x 1.2
2 x 1.2
0.85
1.2
1.2
1.2
1.2
1.3
1.3
1.3
3.4
3.4
3.4
3.4
2 x 3.4
2 x 3.4
2 x 3.4
G R U P A
OP-MCZC030
OP-MCZC038
OP-MCZC048
OP-MCZC054
OP-MCZC060
OP-MCZC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
MCC Compressor [A]
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
180
Application range at
following ambient
temperature
38°C
Power
consumption [W]
at evap. temp.
-10°C
Fig
Height
H
[mm]
Width
W
[mm]
Length
D
[mm]
Dist
a
[mm]
Dist
b
[mm]
Suction Liquid
line
line
[inch]
[inch]
Weight
[kg]
Compressor
5
10
3.305
3.945
1.007
3
5
408
500
600
400
465
½
3 8
⁄
54
MTZ18
4.309
5.093
1.367
3
5
451
500
620
400
465
½
3 8
⁄
56
MTZ22
5.781
6.879
1.639
6
5
555
630
650
400
595
½
½
64
MTZ28
6.294
7.376
1.878
6
5
555
630
650
400
595
5 8
⁄
½
65
MTZ32
7.070
8.198
2.248
6
5
555
630
650
400
595
5 8
⁄
½
68
MTZ36
8.214
9.550
2.662
6
5
605
630
650
400
595
5 8
⁄
½
72
MTZ40
2.869
8
5
656
755
700
400
720
7 8
⁄
½
95
MTZ51
10.981 12.996
3.061
8
5
656
755
700
400
720
7 8
⁄
½
100
MTZ57
12.827 15.180
4.047
8
5
656
755
700
400
720
7 8
⁄
½
113
MTZ65
14.764 17.469
4.659
10
5
708
900
900
600
865
11⁄8
½
127
MTZ73
16.349 19.224
5.387
10
5
759
900
900
600
865
11⁄8
½
140
MTZ81
18.969 22.458
6.209
14
5
759
900
900
600
865
11⁄8
5 8
⁄
162
MTZ100
25.991 30.572
8.375
14
6
759
1.350
820
550
1.315
11⁄8
5 8
⁄
191
MTZ125
28.625 33.732
9.399
14
6
759
1.350
820
550
1.315
11⁄8
5 8
⁄
194
MTZ144
32.558 38.075
10.678
14
6
759
1.350
820
550
1.315
11⁄8
5 8
⁄
199
MTZ160
-10°C till
+10°C
9.662 11.380
5°C
Dimensions [mm]
Receiver
volume
[l]
Electrical Code
D Compressor 400 V/3 phase/50 Hz, fan 400 V/3 phase/50 Hz
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 220 V/1 phase/50 Hz, fan 220 V/1 phase/50 Hz
Automatic controls
Unit
Orifice
-10°C +5°C
To be selected depending
your application
Filter drier Sight glass
type
type
DML053
DML053
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML084
DML165
DML165
DML165
DML165
SGN10
SGN10
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN12
SGN16
SGN16
SGN16
SGN16
Pressure
control
type
Thermostat
type
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP1/KP7/KP17
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
KP 61/EKC 202
Solenoid valve
type
-10°C
+5°C
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
EVR 6
EVR 3
EVR 3
EVR 3
EVR 3
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 6
EVR 10
EVR 10
EVR 10
Coil
Fan Speed
Weatherproof
code number controller type housing type
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
018F6701
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1L4-7DS
RGE-Z1N4-7DS
REG-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1N4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
RGE-Z1Q4-7DS
118U8030
118U8030
118U8031
118U8031
118U8031
118U8031
118U8032
118U8032
118U8032
118U8033
118U8033
118U8033
118U8034
118U8034
118U8034
G R U P A
OP-MCZC030
OP-MCZC038
OP-MCZC048
OP-MCZC054
OP-MCZC060
OP-MCZC068
OP-MCZC086
OP-MCZC096
OP-MCZC108
OP-MCZC121
OP-MCZC136
OP-MCZC171
OP-MGZC215
OP-MGZC242
OP-MGZC271
Expansion
valve type
The mentioned RGE are only suitable for 1 phase fans
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
181
Dimensions
–
—
H
H
8570
a
8.5
192
228
W
228
192
8572
W
8 x ø7
a
D
8 x ø7
8.5
D
˜
™
H
H
W
a
D
8 x ø7
8.5
8573
192
228
192
228
8571
W
a
8 x ø7
8.5
D
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
182
Dimensions
›
š
H
H
D
8561
a
D
2
4x
ø1
17.5
20
2
ø1
17.5
8560
a
4x
20
b
W
b
W

H
H
œ
8624
20
385
20
10
20
20
326
a
D
G R U P A
a
D
20
152
W
342
470
8 x ø9
W
8623
4 x ø9
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail:TM
[email protected]
OPTYMA condensing units
183
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
184
OPTYMA PLUS™
– the low noise condensing units for quick installation
OPTYMA PLUS™ is a unique integral Danfoss condensing unit built around Danfoss components. In
designing the range Danfoss combined the very best design knowledge to create a fully factory built
condensing unit ready for quick installation and quiet operation.
Product advantages
Customer benefits
· Fully weatherproof housing made from epoxy powder
coated steel
Installer benefits:
· Extremely low noise level – as standard supplied with
Danfoss compressor, fan speed control, filter drier, shut
off valve, pressure switch, magnetic contactor, sight
glass and electrical fuse.
· Easy maintenance: just remove the panels and you have
easy access to the components
· Small dimensions
· Electrical box : IP 54
· Energy efficient
· Low energy consumption
· An integrated Danfoss design
· Outstanding performance even in the toughest applications
· A minimum size footprint enabling installation in small
spaces without compromising the units’ performance or
service accessibility
· Common Danfoss components all stocked locally by
wholesalers
End-user benefits:
· Low noise operation
· Modern practical design with a neutral colour to fit in with
its surroundings
· Reliable high ambient operation and proven reliability in
the most demanding applications
G R U P A
· Strong weather resistant housing with lasting durability
even in the harshest environments
d.o.o.
· Energy saving benefits with fan speed control and selection
of energy efficient components
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
185
OPTYMA PLUS™ R404A/R507 LBP
Unit
OP-LPHC018
Platform
SC
Code
number
114X3108
Electrical
code
G
Condenser
fan
Condenser coil
HP
Type
3 4
⁄
A6
Airflow
[m3/h]
1.500
Int. volume Fan blade ∅
[L]
[mm]
1.6
1×356
Capacity in [W] at
evaporating temperature [°C]
Ambient
°C
Test
conditons
-45
-40
-35
-30
27
276
384
516
671
32
239
338
459
603
38
189
280
389
521
331
452
390
550
741
968
43
27
OP-LPHC026
GS
114X3116
G
1
A6
1.500
1.6
1×356
32
328
473
650
859
38
255
386
545
733
461
632
485
769
1.109
1.503
43
27
OP-LPHC048
NT
114X3224
G
2 1⁄2
C6
3.000
1.1
1×406
32
396
659
971
1.331
38
290
528
808
1.128
43
27
OP-LPHC048
NT
114X3232
E
2 1⁄2
C6
3.000
1.1
1×406
485
NT
114X3240
G
3 1⁄2
D6
2.600
2.2
1×406
NT
114X3248
E
3 1⁄2
D6
2.600
2.2
1×406
396
659
971
1.331
528
808
1.128
422
675
962
969
1.400
1.911
2.503
32
815
1.212
1.681
2.226
38
650
1.007
1.428
1.913
852
1.232
1.669
27
969
1.400
1.911
2.503
32
815
1.212
1.681
2.226
38
650
1.007
1.428
1.913
852
1.232
1.669
1223
1.792
2.388
3.227
43
27
OP-LPHC096
NT
114X3356
E
5
F6
6.100
3.4
1×609
32
1.483
2.099
2.872
38
1.194
1.742
2.432
43
27
OP-LPHC136
NT
114X3364
E
7
F6
6.100
3.4
1×609
1.847
NT
114X3480
E
13 1⁄2
J6
12.200
6.9
2×609
1.445
2.062
3.550
4.674
32
2.275
3.143
4.177
1.881
2.660
3.586
1.562
2.266
3.100
27
3.900
5.530
7.517
9.871
32
3.370
4.894
6.736
8.906
38
2.721
4.107
5.767
7.711
3.447
4.946
6.696
43
Test condition
Superheat 10K
EN 13215
Subcooling within the limits of the condensing unit
957
2.611
38
43
OP-LPHC271
1.503
290
43
OP-LPHC068
962
1.109
32
27
OP-LPHC068
675
769
38
43
SH 10K
422
Electrical code
E Compressor 400 V/3 phase/50 Hz, fan 230 V/1 phase/50 Hz
G Compressor 230 V/1 phase/50 Hz, fan 230 V/1 phase/50 Hz
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
186
-25
-20
-15
-10
854
1.068
1.312
1.591
774
973
1.202
1.463
676
858
1.067
1.307
2.261
594
760
1.233
1.536
1.879
1.104
1.385
1.702
2.059
953
1.207
1.495
1.819
3.557
831
1.062
1.951
2.445
2.981
1.738
2.188
2.675
3.198
1.487
1.883
2.313
2.774
1.282
1.634
1.951
2.445
2.981
3.557
1.738
2.188
2.675
3.198
1.487
1.883
2.313
2.774
1.282
1.634
3.177
3.928
4.751
5.640
2.843
3.534
4.291
5.112
2.464
3.082
3.761
4.499
2.165
2.720
3.177
3.928
4.751
5.640
2.843
3.534
4.291
5.112
2.464
3.082
3.761
4.499
8.520
2.165
2.720
4.250
5.469
6.889
3.816
4.943
6.261
7.779
3.279
4.293
5.486
6.868
2.824
3.744
5.988
7.496
9.191
11.068
5.387
6.776
8.339
10.073
4.668
5.911
7.318
8.881
22.872
4.076
5.197
12.591
15.685
19.113
11.411
14.254
17.410
20.869
9.949
12.483
15.312
18.416
8.710
10.986
RGT 20
-35°C
EN 13215
(ref. point)
510
725
1.087
1.087
1.884
1.884
2.338
3.518
7.544
Dimensions
[mm]
Gross/Net
[kg]
Sound
power
level
dB(A)
Sound
pressure
level
10 m dB(A)
Compressor
3 8
⁄
96/64
61
30
SC18CLX
5 8
⁄
3 8
⁄
102/76
61
30
GS26CLX
480
5 8
⁄
3 8
⁄
116/82
72
41
NTZ048
1.053
480
5 8
⁄
3 8
⁄
116/82
72
41
NTZ048
760
1.053
480
5 8
⁄
3 8
⁄
118/84
71
39
NTZ068
2
760
1.053
480
5 8
⁄
3 8
⁄
118/84
71
39
NTZ068
7.1
3
975
1.406
550
7 8
⁄
3 8
⁄
161/115
73
42
NTZ096
7.1
3
975
1.406
550
1 1⁄8
1 2
⁄
161/115
73
42
NTZ136
14.0
4
1.794
1.420
650
1 3⁄8
3 4
329/275
78
47
NTZ271
Connections
Receiver
volume
[L]
Housing
Height
H
Width
W
Depth
D
Suction
line
Liquid
line
1.2
1
652
906
430
1 2
⁄
1.2
1
652
906
430
4.2
2
760
1.053
4.2
2
760
4.2
2
4.2
EN 13215
Information point RGT 20
Constant Return Gas Temperature 20°C
Ambient temperature = +32°c
Subcooling within the limits of the condensing unit
⁄
Weight
Sound measurement done in accordance with ISO 3743-1 and ISO 3744.
MBP measured according to EN 13215 @ -10°C suction, +32°C ambient, SH 10 K
LBP measured according to EN 13215 @ -25°C suction, +32°C ambient, SH 10 K
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
187
Test
conditons
Unit
OP-MPHC010
Condenser
fan
Condenser coil
Platform
Code
number
Electrical
code
HP
SC
114×4100
G
1 3
Type
⁄
A6
Airflow
[m3/h]
1.500
Int. volume Fan blade ∅
[L]
[mm]
1.6
1×356
Ambient
°C
OPTYMA PLUS™ R404A/R507 MBP
Capacity in [W] at
evaporating temperature [°C]
-30°C
-25°C
-20°C
-15°C
27
621
776
32
565
708
38
496
626
1.050
1.294
43
557
27
OP-MPHC018
SC
114X4108
G
5 8
⁄
A6
1.500
1.6
1×356
32
953
1.181
38
838
1.045
1.367
1.832
43
27
OP-MPZC030
OP-MPZC030
MT
MT
114X4216
114X4224
G
E
1 1⁄2
1 1⁄2
C6
C6
3.000
3.000
1.1
1.1
1×406
1×406
932
645
971
32
561
860
1.223
1.649
38
465
734
1.056
1.433
43
389
632
921
1.258
27
645
971
1.367
1.832
32
561
860
1.223
1.649
38
465
734
1.056
1.433
43
389
632
921
1.258
27
OP-MPHC034
GS
114X4228
G
1 5⁄8
A6
1.500
1.6
1×356
2.510
32
2.304
38
2.492
43
OP-MPZC048
OP-MPZC048
MT
MT
114X4232
114X4240
G
E
2
2
D6
D6
2.600
2.600
2.2
2.2
1×406
1×406
SH 10K
OP-MPZC060
OP-MPZC060
OP-MPZC086
OP-MPZC108
OP-MPZC136
OP-MPZC171
MT
MT
MT
MT
MT
MT
114X4248
114X4256
114X4364
114X4372
114X4380
114X4488
114X4496
Test condition
Superheat 10K
EN 13215
Subcooling within the limits of the condensing unit
G
E
E
E
E
E
E
3
3
4 1⁄4
5 1⁄4
7
8 1⁄2
10
D6
D6
F6
F6
G6
J6
J6
2.600
2.600
6.100
6.100
5.100
12.200
12.200
2.2
2.2
3.4
3.4
5.2
6.9
6.9
1×406
1×406
1×609
1×609
1×609
2×609
2×609
Electrical code
E Compressor 400 V/3 phase/50 Hz, fan 240 V/3 phase/50 Hz
G Compressor 230 V/1 phase/50 Hz, fan 230 V/1 phase/50 Hz
1.389
1.948
2.604
3.358
3.008
32
1.175
1.698
2.309
38
934
1.412
1.966
2.600
43
746
1.185
1.692
2.269
27
1.389
1.948
2.604
3.358
32
1.175
1.698
2.309
3.008
38
934
1.412
1.966
2.600
43
746
1.185
1.692
2.269
27
1.963
2.641
3.426
4.307
32
1.727
2.360
3.086
3.898
38
1.446
2.025
2.679
3.407
43
1.211
1.745
2.341
2.998
27
1.963
2.641
3.426
4.307
32
1.727
2.360
3.086
3.898
38
1.446
2.025
2.679
3.407
43
1.211
1.745
2.341
2.998
27
2.753
3.745
4.937
6.331
32
2.401
3.316
4.411
5.691
38
2.010
2.830
3.809
4.954
43
1.705
2.448
3.330
4.360
27
3.441
4615
6.018
7.656
32
3.008
4.102
5.398
6.905
38
2.506
3.499
4.667
6.019
43
2.102
3.008
4.067
5.290
27
4.692
6.175
7.897
9.855
32
4.153
5.537
7.131
8.942
38
3.537
4.796
6.236
7.864
43
3.043
4.196
5.505
6.975
27
5.238
7.183
9.519
12.246
11.145
32
4.641
6.464
8.629
38
3.895
5.576
7.542
9.807
43
3.243
4.811
6.616
8.679
27
7.078
9.390
12.129
15.303
32
6.221
8.350
10.869
13.785
38
5.280
7.183
9.436
12.040
43
4.561
6.274
8.295
10.640
= Superheat 15K
G R U P A
OP-MPZC215
MT
1.827
27
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
188
-10°C
-5°C
0°C
5°C
961
1.177
1.425
1.703
879
1.079
1.308
1.566
780
960
1.167
1.401
10°C
697
861
1.049
1.580
1.907
2.277
1.447
1.753
2.100
2.489
1.287
1.565
1.882
2.240
1.152
1.406
1.697
2.365
2.958
3.605
4.299
2.135
2.677
3.270
3.908
4.585
1.863
2.346
2.874
3.445
4.053
1.642
2.073
2.548
2.365
2.958
3.605
4.299
5.033
2.135
2.677
3.270
3.908
4.585
1.863
2.346
2.874
3.445
4.053
1.642
2.073
2.548
3.035
3.627
4.286
2.794
3.345
3.957
4.630
2.991
3.544
4.152
4.438
Dimensions
[mm]
Gross/Net
[kg]
Sound
power
level
dB(A)
Sound
pressure
level
10 m dB(A)
Compressor
3 8
⁄
96/64
61
30
SC10MLX
3 8
⁄
3 8
⁄
96/64
61
30
SC18MLX
480
5 8
⁄
3 8
⁄
116/83
72
41
MTZ18
1.053
480
5 8
⁄
3 8
⁄
116/83
72
41
MTZ18
760
1.053
480
5 8
⁄
3 8
⁄
114/82
67
36
GS34MLX
2
760
1.053
480
5 8
⁄
3 8
⁄
120/86
71
39
MTZ28
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
120/86
71
39
MTZ28
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
125/88
72
40
MTZ36
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
125/88
72
40
MTZ36
7.1
3
975
1.406
550
7 8
⁄
5 8
⁄
163/117
74
42
MTZ51
7.1
3
975
1.406
550
7 8
⁄
5 8
⁄
163/117
74
42
MTZ65
7.1
3
975
1.406
550
1 1⁄8
5 8
⁄
168/122
76
45
MTZ81
14.0
4
1.794
1.420
650
1 3⁄8
5 8
⁄
327/271
78
47
MTZ100
14.0
4
1.794
1.420
650
1 3⁄8
3 4
329/275
78
47
MTZ125
Connections
Weight
Receiver
volume
[L]
Housing
Height
H
Width
W
Depth
D
Suction
line
Liquid
line
1.2
1
652
906
430
3 8
⁄
1.2
1
652
906
430
4.2
2
760
1.053
4.2
2
760
4.2
2
4.2
2.691
5.033
5.012
2.234
2.687
3.190
3.742
4.209
5.149
6.176
7.282
8.459
3.798
4.672
5.625
6.654
7.751
3.315
4.106
4.972
7.751
6.910
8.459
2.920
3.644
4.436
4.209
5.149
6.176
7.282
3.798
4.672
5.625
6.654
7.751
3.315
4.106
4.972
7.751
6.910
9.755
2.920
3.644
4.436
5.275
6.318
7.422
8.572
4.785
5.740
6.749
7.800
8.884
4.198
5.046
5.942
6.877
7.846
9.755
3.708
4.470
5.272
5.275
6.318
7.422
8.572
4.785
5.740
6.749
7.800
8.884
4.198
5.046
5.942
6.877
7.846
3.708
4.470
5.272
7.929
9.718
11.691
13.836
16.138
7.158
8.814
10.639
12.626
14.767
6.267
7.753
9.398
11.201
13.146
5.544
6.884
8.834
9.517
11.596
13.877
16.339
18.961
8.626
10.545
12.654
14.937
17.376
7.565
9.291
11.192
13.262
15.484
22.559
6.686
8.251
9.984
12.031
14.413
16.977
19.701
10.951
13.146
15.516
18.037
20.691
9.667
11.641
13.775
16.054
18.466
31.667
8.610
10.400
12.337
15.355
18.838
22.650
26.772
14.003
17.024
20.709
24.499
28.553
12.371
15.235
18.374
21.782
25.426
36.834
13.584
16.434
22.862
27.204
31.875
17.095
20.773
24.790
29.126
33.744
15.010
18.316
21.944
25.878
30.088
13.322
16.314
19.622
⁄
Sound measurement done in accordance with ISO 3743-1 and ISO 3744.
MBP measured according to EN 13215 @ -10°C suction, +32°C ambient, SH 10 K
LBP measured according to EN 13215 @ -25°C suction, +32°C ambient, SH 10 K
G R U P A
11.000
18.887
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
189
Test
conditons
Unit
OP-MPZC030
OP-MPZC030
OP-MPGC034
OP-MPZC048
OP-MPZC048
OP-MPZC060
Platform
Code
number
Electrical
code
MT
114X4216
G
MT
GS
MT
MT
MT
114X4224
114X4112
114X4232
114X4240
114X4248
E
G
G
E
G
Condenser
fan
Condenser coil
HP
Type
1 2
1 ⁄
1 1⁄2
1 5⁄8
2
2
3
C6
C6
A6
D6
D6
D6
Airflow
[m3/h]
3.000
3.000
1.500
2.600
2.600
2.600
Int. volume Fan blade ∅
[L]
[mm]
1.1
1.1
1.6
2.2
2.2
2.2
1×406
1×406
1×356
1×406
1×406
1×406
SH 10K
OP-MPZC060
OP-MPZC086
OP-MPZC108
OP-MPZC136
OP-MPZC171
OP-MPZC215
MT
MT
MT
MT
MT
MT
Test condition
Superheat 10K
EN 13215
Subcooling within the limits of the condensing unit
114X4256
114X4364
114X4372
114X4380
114X4488
114X4496
E
E
E
E
E
E
3
4 1⁄4
5 1⁄2
7
8 1⁄2
10
D6
F6
F6
G6
J6
J6
2.600
6.100
6.100
5.100
12.200
12.200
2.2
3.4
3.4
5.2
6.9
6.9
1×406
1×609
1×609
1×609
2×609
2×609
Ambient
°C
OPTYMA PLUS™ R134a MBP
Capacity in [W] at
evaporating temperature [°C ]
-15
-10
-5
27
996
1.425
1.885
2.403
32
919
1.285
1.712
2.199
38
778
1.119
1.513
1.961
43
677
993
1.356
1.768
27
996
1.425
1.885
2.403
32
919
1.285
1.712
2.199
38
778
1.119
1.513
1.961
43
677
993
1.356
1.768
27
1.347
1.677
2.059
2.493
32
1.255
1.568
1.930
2.344
38
1.143
1.436
1.775
2.163
43
1.048
1.325
1.645
2.011
27
1.615
2.214
2.974
3.738
32
1.518
2.044
2.692
3.469
38
1.348
1.835
2.433
3.149
43
1.226
1.675
2.225
2.886
27
1.615
2.214
2.974
3.738
32
1.518
2.044
2.692
3.469
38
1.348
1.835
2.433
3.149
43
1.226
1.675
2.225
2.886
27
2.597
3.278
4.125
5.097
4.778
32
2.364
3.053
3.858
38
2.138
2.783
3.530
4.385
43
1.954
2.558
3.255
4.049
27
2.597
3.278
4.125
5.097
32
2.364
3.053
3.858
4.778
38
2.138
2.783
3.530
4.385
43
1.954
2.558
3.255
4.049
27
3.201
4.411
5.908
7.423
32
3.021
4.077
5.340
6.822
38
2.637
3.612
4.776
6.145
43
2.334
3.248
4.335
5.611
27
3.662
5.216
6.858
8.792
32
3.411
4.754
6.337
8.165
38
2.982
4.243
5.723
7.426
43
2.632
3.827
5.220
6.822
27
5.347
7.201
8.998
11.305
10.570
32
4.923
6.509
8.386
38
4.402
5.889
7.642
9.677
43
3.967
5.370
7.018
8.930
27
6.228
8.486
11.253
14.151
32
5.900
7.908
10.315
13.150
38
5.180
7.066
9.318
11.961
43
4.646
6.414
8.521
10.990
27
7.987
10.774
13.704
17.156
32
7.406
9.805
12.641
15.930
38
6.458
8.721
11.382
14.458
43
5.721
7.855
10.352
13.234
Electrical code
E Compressor 400 V/3 phase/50 Hz, fan 230 V/3 phase/50 Hz
G Compressor 230 V/1 phase/50 Hz, fan 230 V/1 phase/50 Hz
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
190
0
5
10
15
20
2.987
3.632
4.334
5.087
2.747
3.350
4.006
4.708
2.462
3.013
3.610
4.249
2.226
2.732
2.987
3.632
4.334
5.087
2.747
3.350
4.006
4.708
2.462
3.013
3.610
4.249
2.226
2.732
Dimensions
[mm]
Height
H
Width
W
Depth
D
Suction
line
Liquid
line
Gross/Net
[kg]
Sound
power
level
dB(A)
2
760
1.053
480
5 8
⁄
3 8
⁄
116/83
72
41
MTZ18
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
116/83
72
41
MTZ18
1.2
1
652
906
430
1 2
⁄
3 8
⁄
102/76
63
32
GS34MFX
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
120/86
71
39
MTZ28
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
120/86
71
39
MTZ28
4.2
2
760
1.053
480
3 4
⁄
3 8
⁄
125/88
72
40
MTZ36
4.2
2
760
1.053
480
3 4
⁄
3 8
⁄
125/88
72
40
MTZ36
7.1
3
975
1.406
550
7 8
⁄
5 8
⁄
163/117
74
42
MTZ51
7.1
3
975
1.406
550
7 8
⁄
5 8
⁄
163/117
74
42
MTZ65
7.1
3
975
1.406
550
1 1 ⁄8
5 8
⁄
168/122
76
45
MTZ81
14.0
4
1.794
1.420
650
1 3 ⁄8
5 8
⁄
327/271
78
47
MTZ100
14.0
4
1.794
1.420
650
1 3 ⁄8
3 4
329/275
78
47
MTZ125
Receiver
volume
[L]
Housing
4.2
Connections
Weight
Sound
pressure
Compressor
level
10 m dB(A)
2.984
2.811
2.603
2.427
4.704
5.808
7.048
4.379
5.419
6.587
8.413
7.872
3.988
4.947
6.023
7.210
8.413
3.660
4.549
4.704
5.808
7.048
4.379
5.419
6.587
7.872
3.988
4.947
6.023
7.210
3.660
4.549
6.195
7.410
8.735
10.158
5.814
6.958
8.203
9.540
5.342
6.398
7.546
8.777
10.158
4.937
5.917
6.195
7.410
8.735
5.814
6.958
8.203
9.540
5.342
6.398
7.546
8.777
16.072
4.937
5.917
9.242
11.293
13.571
8.528
10.466
12.621
14.993
7.723
9.520
11.528
13.747
18.942
7.086
8.770
10.975
13.406
16.068
10.235
12.535
15.057
17.783
9.356
11.501
13.855
16.403
23.625
8.635
10.650
13.930
16.871
20.108
13.055
15.840
18.909
22.247
11.993
14.592
17.462
20.588
11.105
13.546
17.602
21.539
25.945
30.821
16.426
20.159
24.338
28.958
15.015
18.492
22.385
26.685
35.854
13.843
17.097
21.113
25.554
30.479
19.688
23.902
28.568
33.662
17.965
21.893
26.233
30.972
16.518
20.194
⁄
Sound measurement done in accordance with ISO 3743-1 and ISO 3744.
MBP measured according to EN 13215 @ -10°C suction, +32°C ambient, SH 10 K
LBP measured according to EN 13215 @ -25°C suction, +32°C ambient, SH 10 K
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
191
Test
conditons
Unit
OP-MPZC030
Platform
Code
number
Electrical
code
MT
114X4216
G
Condenser
fan
Condenser coil
HP
Type
1 2
1 ⁄
C6
Airflow
[m3/h]
3.000
Int. volume
[L]
1.1
Fan blade ∅
[mm]
1×406
Ambient
°C
OPTYMA PLUS™ R407C MBP
Capacity in [W] at
evaporating temperature [°C ]
-15
-10
27
1.479
1.999
2.585
32
1.308
1.798
2.351
1.570
2.083
38
43
OP-MPZC030
MT
114X4224
E
1 2
1 ⁄
C6
3.000
1.1
1×406
1.869
27
1.479
1.999
2.585
32
1.308
1.798
2.351
1.570
2.083
38
43
OP-MPZC048
MT
114X4232
G
2
D6
2.600
2.2
1×406
1.869
27
2.534
3.402
4.370
32
2.289
3.112
4.023
2.756
3.603
38
43
OP-MPZC048
MT
114X4240
E
2
D6
2.600
2.2
1×406
3.250
27
2.534
3.402
4.370
32
2.289
3.112
4.023
2.756
3.603
38
43
OP-MPZC060
MT
114X4248
G
3
D6
2.600
2.2
1×406
3.250
27
3.398
4.375
5.452
32
3.058
3.986
5.001
3.508
4.450
38
43
SH 10K
OP-MPZC060
MT
114X4256
E
3
D6
2.600
2.2
1×406
3.983
27
3.398
4.375
5.452
32
3.058
3.986
5.001
3.508
4.450
6.471
8.158
5.927
7.508
38
43
OP-MPZC086
MT
114X4364
E
4 1⁄4
F6
6.100
3.4
1×609
3.983
27
5.117
32
4.544
38
5.275
43
OP-MPZC108
MT
114X4372
E
5 1⁄2
F6
6.100
3.4
1×609
MT
114X4380
E
7
G6
5.100
5.2
1×609
27
6.256
7.978
9.935
32
5.701
7.315
9.149
6.541
8.223
38
7.470
27
7.933
10.125
12.575
32
7.271
9.344
11.647
8.402
10.525
38
43
OP-MPZC171
MT
114X4488
E
8 1⁄2
J6
12.200
6.9
2×609
9.590
27
9.705
12.536
15.963
32
8.627
11.436
14.657
10.128
13.095
16.388
20.274
38
43
OP-MPZC215
MT
114X4496
E
10
J6
12.200
6.9
2×609
11.806
27
12.921
32
11.790
38
15.068
18.726
13.472
16.854
43
Test condition
Superheat 10K
EN 13215
15.294
Electrical code
E Compressor 400 V/3 phase/50 Hz, fan 230 V/3 phase/50 Hz
G Compressor 230 V/1 phase/50 Hz, fan 230 V/1 phase/50 Hz
Subcooling within the limits of the condensing unit
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
192
6.730
6.084
43
OP-MPZC136
-5
0
5
10
3.232
3.933
4.678
2.960
3.618
4.318
2.645
3.252
3.896
Receiver
volume
[L]
Housing
4.2
Dimensions
[mm]
Connections
Weight
Sound
power level
dB(A)
Sound
pressure
level
10 m dB(A)
Compressor
Height
H
Width
W
Depth
D
Suction
line
Liquid
line
Gross/Net
[kg]
2
760
1.053
480
5 8
⁄
3 8
⁄
116/83
72
41
MTZ18
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
116/83
72
41
MTZ18
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
120/86
71
39
MTZ28
4.2
2
760
1.053
480
5 8
⁄
3 8
⁄
120/86
71
39
MTZ28
4.2
2
760
1.053
480
3 4
⁄
3 8
⁄
125/88
72
40
MTZ36
4.2
2
760
1.053
480
3 4
⁄
3 8
⁄
125/88
72
40
MTZ36
7.1
3
975
1.406
550
7 8
⁄
5 8
⁄
163/117
74
42
MTZ51
7.1
3
975
1.406
550
7 8
⁄
5 8
⁄
163/117
74
42
MTZ65
7.1
3
975
1.406
550
1 1⁄8
5 8
⁄
168/122
76
45
MTZ81
14.0
4
1.794
1.420
650
1 3⁄8
5 8
⁄
327/271
78
47
MTZ100
14.0
4
1.794
1.420
650
1 3⁄8
3 4
329/275
78
47
MTZ125
2.393
3.232
3.933
4.678
2.960
3.618
4.318
2.645
3.252
3.896
5.425
6.547
7.719
5.009
6.055
7.144
4.510
5.467
6.459
5.425
6.547
7.719
5.009
6.055
7.144
4.510
5.467
6.459
6.609
7.828
9.089
6.087
7.227
8.404
5.453
6.500
7.576
6.609
7.828
9.089
6.087
7.227
8.404
5.453
6.500
7.576
2.393
4.093
4.093
4.916
4.916
10.045
12.125
14.376
9.274
11.218
13.325
8.353
10.135
12.069
12.118
14.506
17.073
11.194
13.433
15.842
10.098
12.155
14.371
7.590
9.201
15.249
18.114
21.130
14.152
16.827
19.636
12.824
15.270
17.833
19.809
24.053
28.657
18.263
22.243
26.562
16.414
20.071
24.044
24.561
29.198
34.150
22.747
27.095
31.725
20.558
24.554
28.806
11.715
14.885
⁄
18.732
Sound measurement done in accordance with ISO 3743-1 and ISO 3744.
MBP measured according to EN 13215 @ -10°C suction, +32°C ambient, SH 10 K
LBP measured according to EN 13215 @ -25°C suction, +32°C ambient, SH 10 K
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
193
LBP – R404A/R507
Electrical characteristics – 230 V, 1 phase
LRA Compressor MCC Compressor
[A]
[A]
Unit
Max. continuous
power
consumption [kW]
Code
number
Contactor
OP-LPHC018
23.5
6
0.97
CI 9
OP-LPHC026
25.7
5.7
1.37
CI 9
Main
switch
037H0021
OP-LPHC048
37
11
2.19
CI 12
037H0031
OP-LPHC068
53
17
3.30
CI 15
037H0049
Contactor
Code
number
Code
number
MCC fan
[A]
Fan power
[W]
047B3149
0.32
1×25
047B3157
0.63
1×75
Code
number
MCC fan
[A]
Fan power
[W]
0.63
1×75
1.1
1×130
2×1.1
2×130
CTI25M(B)
Electrical characteristics – 400 V, 3 phase
LRA Compressor MCC Compressor
[A]
[A]
Unit
Max. continuous
power
consumption [kW]
OP-LPHC048
16
4.8
2.19
CI 6
037H0015
OP-LPHC068
25
8.4
3.30
CI 9
037H0021
OP-LPHC096
32
10.1
4.21
OP-LPHC136
51
14.3
6.37
CI 12
037H0031
OP-LPHC271
96
27
11.99
CI 30
037H0055
Main
switch
047B3147
047B3149
CTI25M(B)
047B3157
047B3159
Automatic controls
Unit
Filter drier
Sight glass
Pressure switch
Suction valve
OP-LPHC018
OP-LPHC026
OP-LPHC048
DML82.5s
023Z4568
SGN10s
014-0182
KP17 WB
OP-LPHC068
GBC12s
009G7052
GBC16s
009G7053
Liquid valve
GBC10s
060-5397
Fan Speed controller
009G7051 RGE-Z1L4-7DS 061H3045
or
or
XGE-4CB1
061H3142
OP-LPHC096 DML162.5s
023Z4576
GBC22s
009G7055
OP-LPHC136
DML164s
023Z4580
SGN12s
014-0183
GBC28s
009G7056
GBC12s
009G7052
OP-LPHC271
DML166s
023Z4582
SGN19s
014-0185
GBC35s
009G7057
GBC18s
009G7054
Spare parts
Unit
Platform
OP-LPHC018
SC
OP-LPHC026
GS
OP-LPHC048
NT
OP-LPHC068
NT
OP-LPHC096
NT
OP-LPHC136
NT
OP-LPHC271
NT
Receiver volume
[L]
Fan Motor
(capacitor included)
Fan Blade
Fan Grill
Fan capacitor
1.2
118U0003
Fan motor 25 W
118U0016 Blade …14" 118U0017
Grill H1
118U0018
1.8 μF
118U0019
4.2
118U0004
Fan motor 75 W
118U0007 Blade …16" 118U0009
Grill H2
118U0011
3.5 μF
118U0014
7.1
118U0005
Fan motor 130 W
118U0008 Blade …24"
118U0012
6.0 μF
118U0015
14.0
118U0006
118U0010
Grill H3
Handling
handle
118U0013
Grill H4
Note:
LRA (Locked Rotor Amps)
MCC (Maximum Continuous Current)
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
194
MBP – R404A/R507
Electrical characteristics – 230 V, 1 phase
Unit
LRA Compressor MCC Compressor
[A]
[A]
Max. continuous
power
consumption [kW]
Contactor
Code
number
CI 6
037H0015
047B3148
CI 9
037H0021
047B3149
OP-MPHC010
18.4
4.5
0.65
OP-MPHC018
23.4
6
1.13
OP-MPZC030
40
10
1.82
OP-MPHC034
45.7
12.6
2.58
CI15
037H0049
OP-MPZC048
55
16
3.07
CI 16
037H0049
OP-MPZC060
70
20
4.20
CI 20
037H0045
Max. continuous
power
consumption [kW]
Contactor
Code
number
CI 6
037H0015
Main
switch
Code
number
MCC fan
[A]
Fan power
[W]
0.32
1×25
0.63
1×75
MCC fan
[A]
Fan power
[W]
0.63
1×75
1.1
1×130
2×1.1
2×130
CTI25M(B)
047B3157
047B3158
Electrical characteristics – 400 V, 3 phase
Unit
LRA Compressor MCC Compressor
[A]
[A]
OP-MPZC030
20
5
1.82
OP-MPZC048
23
7.5
3.07
OP-MPZC060
30
8.5
4.20
OP-MPZC086
48.5
11.5
4.72
OP-MPZC108
64
14
6.60
OP-MPZC136
80
19
8.78
OP-MPZC171
90
22
OP-MPZC215
105
27
CI 9
037H0021
CI 12
037H0031
CI 16
037H0041
9.66
CI 25
037H0051
13.10
CI 30
037H0055
Main
switch
Code
number
047B3147
047B3148
047B3157
CTI25M(B)
047B3158
047B3159
Automatic controls
Unit
Filter drier
Sight glass
Pressure switch
Suction valve
OP-MPHC010
OP-MPHC018
OP-MPZC030 DML082.5s
023Z4568
OP-MPHC034
SGN10s
014-0182
Liquid valve
GBC10s
009G7051
GBC16s
009G7053
GBC18s
009G7054
GBC22s
009G7055
GBC28s
009G7056
GBC35s
009G7057
GBC10s
009G7051
OP-MPZC048
OP-MPZC060
KP17 WB
DML083s
023Z4570
DML165s
023Z4581
SGN16s
014-0184
DML166s
023Z4582
SGN19s
014-0185
060-5397
OP-MPZC086
OP-MPZC108
OP-MPZC136
OP-MPZC171
OP-MPZC215
Fan Speed controller
RGE-Z1L4-7DS 061H3045
or
or
XGE-4CB1
061H3142
GBC16s
009G7053
GBC18s
009G7054
Spare parts
Unit
OP-MPHC010
OP-MPHC018
Receiver volume
[L]
Fan Motor
(capacitor included)
Fan Blade
Fan Grill
Fan capacitor
1.2
118U0003
Fan motor 25 W
118U0016
Blade …14"
118U0017
Grill H1
118U0018
1.8 μF
118U0019
4.2
118U0004
Fan motor 75 W
118U0007
Blade …16"
118U0009
Grill H2
118U0011
3.5 μF
118U0014
Handling
handle
OP-MPZC030
OP-MPHC034
OP-MPZC048
OP-MPZC060
118U0013
OP-MPZC086
OP-MPZC108
7.1
118U0005
OP-MPZC136
OP-MPZC171
OP-MPZC215
Grill H3
Fan motor 130 W
14.0
118U0006
118U0008
Blade …24"
118U0010
118U0012
6.0 μF
118U0015
Grill H4
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
195
MBP – R134a
Electrical characteristics – 230 V, 1 phase
Unit
LRA Compressor MCC Compressor
[A]
[A]
Max. continuous
power
consumption [kW]
Contactor
Code
number
Main
switch
CI 9
037H0021
OP-MPZC030
40
10
1.82
OP-MPGC034
25.7
6.8
1.48
OP-MPZC048
55
16
3.07
CI 16
037H0049
OP-MPZC060
70
20
4.20
CI 20
037H0045
Max. continuous
power
consumption [kW]
Contactor
Code
number
CI 6
037H0015
Code
number
MCC fan
[A]
047B3149
CTI25MB
047B3157
047B3158
Fan power
[W]
0.63
1×75
0.32
1×25
0.63
1×75
MCC fan
[A]
Fan power
[W]
0.63
1x75
1.1
1×130
2×1.1
2×130
Electrical characteristics – 400 V, 3 phase
Unit
LRA Compressor MCC Compressor
[A]
[A]
OP-MPZC030
20
5
1.82
OP-MPZC048
23
7.5
3.07
OP-MPZC060
30
8.5
4.20
OP-MPZC086
48.5
11.5
4.72
OP-MPZC108
64
14
6.60
OP-MPZC136
80
19
8.78
OP-MPZC171
90
22
OP-MPZC215
105
27
Main
switch
Code
number
047B3147
047B3148
CI 9
037H0021
CI 12
037H0031
CI 16
037H0041
9.66
CI25
037H0051
CTI25MB
13.10
CI30
037H0055
CTI25MB
CTI25M
047B3157
047B3158
047B3159
Automatic controls
Unit
Filter drier
Sight glass
Pressure switch
Suction valve
OP-MPZC030
OP-MPGC034 DML082,5s
023Z4568
OP-MPZC048
OP-MPZC060
DML083s
SGN10s
014-0182
023Z4570
KP17 WB
OP-MPZC086
OP-MPZC108
OP-MPZC136
DML165s
023Z4581
SGN16s
014-0184
DML166s
023Z4582
SGN19s
014-0185
060-5397
OP-MPZC171
OP-MPZC215
GBC16s
009G7053
GBC12s
009G7052
GBC16s
009G7053
GBC18s
009G7054
GBC22s
009G7055
GBC28s
009G7056
GBC35s
009G7057
Liquid valve
GBC10s
Fan Speed controller
009G7051
RGE-Z1L4-7DS 061H3045
or
or
XGE-4CB1
061H3142
GBC16s
009G7053
GBC18s
009G7054
Spare parts
Unit
Receiver volume
[L]
Fan Motor
(capacitor included)
Fan Blade
Fan Grill
Fan capacitor
OP-MPZC030
4.2
118U0004
Fan motor 75 W
118U0007
Blade …16"
118U0009
Grill H2
118U0011
3.5 μF
118U0014
OP-MPGC034
1.2
118U0003
Fan motor 25 W
118U0016
Blade …14”
118U0017
Grill H1
118U0018
1.8 μF
118U0018
4.2
118U0004
Fan motor 75 W
118U0007
Blade …16”
118U0009
Grill H2
118U0011
3.5 μF
118U0014
7.0
118U0005
OP-MPZC048
OP-MPZC060
118U0013
OP-MPZC086
OP-MPZC108
OP-MPZC136
OP-MPZC171
OP-MPZC215
Handling
handle
Grill H3
Fan motor 130 W
14.0
118U0006
118U0008
Blade …24"
118U0010
118U0012
6.0 μF
118U0015
Grill H4
Note:
LRA (Locked Rotor Amps)
MCC (Maximum Continuous Current)
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
196
MBP – R407C
Electrical characteristics – 230 V, 1 phase
LRA Compressor MCC Compressor
[A]
[A]
Unit
Max. continuous
power
consumption [kW]
Code
number
Contactor
OP-MPZC030
40
10
1.82
CI 9
037H0021
OP-MPZC048
55
16
3.07
CI 16
037H0049
OP-MPZC060
70
20
4.20
CI 20
037H0045
Max. continuous
power
consumption [kW]
Contactor
Code
number
CI 6
037H0015
Main
switch
Code
number
CTI25MB
047B3157
MCC fan
[A]
Fan power
[W]
0.63
1×75
MCC fan
[A]
Fan power
[W]
0.63
1×75
1.1
1×130
2×1.1
2×130
047B3149
047B3158
Electrical characteristics – 400 V, 3 phase
LRA Compressor MCC Compressor
[A]
[A]
Unit
OP-MPZC030
20
5
1.82
OP-MPZC048
23
7.5
3.07
OP-MPZC060
30
8.5
4.20
OP-MPZC086
48.5
11.5
4.72
OP-MPZC108
64
14
6.60
OP-MPZC136
80
19
8.78
OP-MPZC171
90
22
OP-MPZC215
105
27
Main
switch
Code
number
047B3147
047B3148
CI 9
037H0021
CI 12
037H0031
CI 16
037H0041
9.66
CI 25
037H0051
CTI25MB
13.10
CI 30
037H0055
CTI25MB
CTI25M
047B3157
047B3158
047B3159
Automatic controls
Unit
OP-MPZC030
OP-MPZC048
OP-MPZC060
Filter drier
DML082,5s
023Z4568
DML083s
023Z4570
Sight glass
SGN10s
Pressure switch
014-0182
OP-MPZC086
OP-MPZC108
OP-MPZC136
Suction valve
KP17 WB
DML165s
023Z4581
SGN16s
014-0184
DML166s
023Z4582
SGN19s
014-0185
060-5397
OP-MPZC171
OP-MPZC215
Liquid valve
GBC16s
009G7053
GBC18s
009G7054
GBC22s
009G7055
GBC28s
009G7056
GBC35s
009G7057
Fan Speed controller
GBC10s
009G7051
GBC16s
RGE-Z1L4-7DS 061H3045
or
or
XGE-4CB1
061H3142
009G7053
GBC18s
009G7054
Spare parts
Unit
Receiver volume
[L]
Fan Motor
(capacitor included)
Fan Blade
Fan Grill
Fan capacitor
Handling
handle
OP-MPZC030
OP-MPZC048
4.2
118U0004
7.0
118U0005
Fan motor 75 W
118U0007
Blade …16"
118U0009
Grill H2
118U0011
3,5 μF
118U0014
OP-MPZC060
OP-MPZC086
OP-MPZC108
OP-MPZC136
OP-MPZC171
OP-MPZC215
Fan motor 130 W
14.0
118U0006
118U0013
Grill H3
118U0008
Blade …24"
118U0010
118U0012
6.0 μF
118U0015
Grill H4
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
197
Dimensions
100
122
H=652
356
A (1:2)
D=430
389
A
24
57
A
850
900
W=906
12
Housing 1
50
90
A (1:2)
A
24
120
H=760
401
A
12
Housing 2
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
198
d.o.o.
1002
1050
W=1053
G R U P A
D=480
436
55
Dimensions
AA ( 1 : 2 )
24
57
513
D=550
100
130
H=975
481
12
A
60
1340
1400
W=1406
Housing 3
100
55
56
A (1:2)
A
12
d.o.o.
1350
1410
W=1420
24
A
G R U P A
D=650
612
130
H=1794
569
Housing 4
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
199
Wiring diagrams
B1:
B2:
C1:
C2:
E1:
F1:
K1:
K2:
M1:
M2:
Q1:
S1:
X1:
L1
N
2
4
6
B2
F1
Q1
I >I >I >
P<
Q1
P>
Fan speed control
High- and Low Presssure switch
Start Capacitor (Compressor)
Run Capacitor (Fan)
Crankcase Heater
Fuse (Control Circuit)
Start Relay
Contactor
Compresssor
Fan Motor
Main Switch
Room Thermostat (optional)
Terminals for Room Thermostat
K2
X1
K2
4
B1
S1
P
T>
K2
C2
K1
X1
C1
M
M2 1~
E1
5
K2
M
M1 1~
DWG.-NO.: 118A0156_b
1 phase (only for OP-LPHC018 and OP-MPHC010)
B1:
B2:
C1:
C2:
C3:
E1:
F1:
K1:
K2:
M1:
M2:
Q1:
S1:
X1:
L1
N
2
4
6
B2
F1
Q1
I >I >I >
P<
Q1
P>
K2
K2
X1
4
B1
C1
K1
S1
P
T>
C3
C2
K2
X1
M
M2 1~
M
M1 1~
Fan speed control
High- and Low Presssure switch
Start Capacitor (Compressor)
Run Capacitor (Compressor)
Run Capacitor (Fan)
Crankcase Heater
Fuse (Control Circuit)
Start Relay
Contactor
Compresssor
Fan Motor
Main Switch
Room Thermostat (optional)
Terminals for Room Thermostat
E1
5
K2
DWG.-NO.: 118A0158_a
G R U P A
1 phase
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
200
Wiring diagrams
L1
L2
L3
N
B2
F1
2
Q1
4
6
X1
B1:
B2:
C1:
C2:
E1:
F1:
K1:
M1:
M2:
M3:
Q1:
S1:
X1:
N
P<
Q1
I >I >I >
K1
P>
K1
X1
4
B1
M
M1 3~
Fan speed control
High- and Low Presssure switch
Run Capacitor (Fan)
Run Capacitor (Fan, only Housing 4)
Crankcase Heater
Fuse (Control Circuit)
Contactor
Compressor
Fan Motor
Fan Motor (only Housing 4)
Main Switch
Room Thermostat (optional)
Terminals for Room Thermostat
S1
P
T>
C1
C2
K1
X1
M
M2 1~
M
M3 1~
E1
5
K1
DWG.-NO.: 118A0157_b
3 phase
Designation system for the OPTYMATM PLUS programme
(additional programme frequency etc.: please contact your local wholesaler)
1.
2.
3.
4.
5.
6.
7.
8.
Application
Design
Refrigerant
Condenser option
Displacement
Compressor platform
Version
Electrical code
OP-MPHC 018
1234
P = Packaged units
Z = R404A, R134a, R507, R407C
H = R404A/R507
G = R134a
5
6
7
8
7
8
026 = 26 cm3
171 = 171 cm3
GS = GS
MT= MTZ
NT = NTZ
SC=SC
P00
G = Compressor 230 V/1 phase/50 Hz,
fan 230 V/1 phase/50 Hz
E = Compressor 400 V/3 phase/50 Hz,
fan 230 V/1 phase/50 Hz
d.o.o.
C = Standard
6
G
G R U P A
1
2
3
4
L = LBP M = MBP
5
SC P00
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
OPTYMA PLUS™ condensing units
201
G R U P A
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
d.o.o.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, tel: 01/66 08 002, fax: 01/66 08 005, www.mbfrigo.hr, e-mail: [email protected]
G R U P A
Valve factory in Denmark
The Danfoss product range for the
refrigeration and air conditioning industry
Danfoss Refrigeration & Air Conditioning is
We focus on our core business of making
a worldwide manufacturer with a leading
quality products, components and systems
position in industrial, commercial and
that enhance performance and reduce
supermarket refrigeration as well as air
total life cycle costs – the key to major
conditioning and climate solutions.
savings.
Controls for
Commercial Refrigeration
Controls for
Industrial Refrigeration
Electronic Controls &
Sensors
Industrial Automation
Household Compressors
Commercial Compressors
Sub-Assemblies
Thermostats
Brazed plate
heat exchangers
We offer a single source for one of the widest ranges of innovative refrigeration and air
conditioning components and systems in the world. And, we back technical
solutions with business solutions to help your company reduce costs,
streamline processes and achieve your business goals.
G R U P A
Danfoss A/S · www.danfoss.com
d.o.o.
DKRA.PK.100.A1.02 / 520B3137
Produced by Danfoss A/S © – G1 Advertising/bpv Apr 2008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement