460ECETC EtherNet/IP to Low Level Allen-Bradley PLC FEATURES

460ECETC EtherNet/IP to Low Level Allen-Bradley PLC FEATURES
Contact Us:
1-800-249-1612
460ECETC
EtherNet/IP to Low Level Allen-Bradley PLC
FEATURES
 Fully Compliant
EtherNet/IP Scanner
 Connects up to 32
EtherNet/IP Adapters
 Supports connection to
up to 5 Allen-Bradley
PLCs
 Up to 496 Bytes of Input
Data per Device
 Up to 496 Bytes of
Output Data per Device
 Map Data directly to
registers in your AllenBradley PLC
 Effortless Browser
Based Configuration, no
programming software is
required
 Simple data translation
allows you to manipulate
data as it passes
between protocols
Get Your EtherNet/IP Adapters Connected Directly to the
Data Table of your Legacy Allen-Bradley PLC
The 460ECETC moves data between up to 32 EtherNet/IP Adapter devices and up to 5
legacy Allen-Bradley PLCs.
Have a Legacy Allen-Bradley PLC that doesn't support Ethernet/IP? Move data from your
EtherNet/IP Adapter devices to low level legacy Allen-Bradley PLCs like the Micrologix, SLC
505, and PLC 5E.
Best of all the product is Made in the USA, is always in stock and comes with 5 year warranty.
How Does the Data Move In and Out of the PLC?
You allocate two areas of register blocks in your Allen-Bradley PLC. One area is a user
defined set of write only registers accepting data from your EtherNet/IP devices. The other
area is full of read only register blocks to send data to your EtherNet/IP devices. You directly
map EtherNet/IP data into read and write locations in the data table of your Allen-Bradley
PLC.
It’s really that simple. Need to modify your data as it passes from one protocol to the other?
No problem. Each data mapping you apply can be modified with up to 3 mathematic functions.
Why use Real Time Automation as a Gateway Supplier?
The 460ECETC provides an option to access EtherNet/IP Adapter devices with a Legacy AB
PLC without having to upgrade your PLC or get an expensive in rack solution. While there are
certainly a number of other companies offering stand alone gateways, there is no one who
provides the level of support and service that you receive from RTA.
When you call, a live person answers the phone. When you talk with sales, you will get honest
answers and recommendations even if that means recommending someone else's solution.
When you get support, it is from an engineer who had a hand in the product’s development,
and support doesn't require a ticket or 24 hour wait. We are unashamed of the fact that we are
a smaller company because that means you mean a lot more to us.
Try the RTA difference today and give us a call at 1-800-249-1612 or check out more
information on us and our other solutions at www.rtaautomation.com.
A Word from our Founder
“It’s likely that your business isn’t industrial networking and it shouldn’t be. You make products, design systems, or manage some process. Whatever it
is that you make, monitor or install the process inevitably creates data. If you’re a control engineer and your plant has been around for a few years your
line is probably littered with devices that send out all kinds of data over many different protocols. If you’re an automation device developer you probably
have customers that need to move your data into some other network. Either way, you’ve got a device conversion problem. You have devices that generate ASCII , Modbus TCP/IP, Modbus TCP, BACnet, Profinet, Profibus, Ethernet TCP/IP , Ethernet/IP, DeviceNet or some other completely proprietary
data and now you’re the person that has to move that data to some other network!
I feel your pain… and rather than just my sympathy, I have a solution for you. You see, while your business may not be moving data around a factory
floor mine is. In fact, it’s all that we have done for over twenty years now. Our 460 series of Device Converters is the culmination of those twenty years.
You can now move all of your data, where you want, when you want and how you want. Try us on your next project, I guarantee you wont regret it.
John Rinaldi
460ECETC
www.rtaautomation.com
ETHERNET/IP SCANNER FEATURES
Operation Modes
Class 1 I/O Scanner (minimal Adapter is required and supported)
Message Support
Implicit Class 1 Cyclic I/O, Explicit not supported.
Data Types
BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Adapter Devices
32
Max Data Per Adapter Connection
Up to 496 bytes in each direction
ETHERNET/IP TAG CLIENT FEATURES
PLC Support
ControlLogix, CompactLogix, FlexLogix, MicroLogix, SLC’s and PLC5E’s
Maximum Number of PLCs Supported
5
Maximum Number of Input Scan Lines per PLC
150
Maximum Number of Output Scan Lines per PLC
150
Net ENI Support
Supported
Supported Data Types
ControlLogix / CompactLogix / FlexLogix: Bit, 32 Bit Array, SINT, INT, REAL, STRING, DINT,
MicroLogix / SLC / PLC5E: 16 Bit Array, INT, REAL, STRING
INCLUDED WITH GATEWAY
120 volt AC wall wart power supply
Manual
6’ power cable with flying leads
5 year hardware warranty
IPSetup software — automatically locates RTA gateway on the network
Unlimited firmware feature upgrades for life
CAT5 crossover cable for direct connection to PC during programming
Complete, unlimited access to our industry leading support staff
ELECTRICAL/ENVIRONMENTAL
DC Input Voltage
8 VDC @ 230 mA to 28 V @ 80 mA
Maximum Baud Rate
115K baud
Operating Temperature
-40 C to 85 C
Certification
RoHS-Compliant, UL, CUL, CE Approvals, Class I Div 2
DIMENSIONS
ENCLOSURE / HARDWARE
Size
4.2” x 3.25” x 1”
Weight
5 oz.
Enclosure Type
Anodized aluminum
Mounting
Din rail or panel mount
LEDs
Ethernet link/data LED, Ethernet speed LED, power LED, &
2 general purpose LEDS on side
GATWAY FEATURES & FUNCTIONS
Gateway Security
You can configure up to 9 different users access to
diagnostic and configuration screens.
Alarming
Set <, <=, >=, >, ==, !=, and change-of-state rules on
any data moving through the gateway. If alarm rule is
triggered an email notification can be sent.
Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur
in the gateway.
Status and
Counters
Protocol specific status, counters and error messages
are accessible within the gateways diagnostics page.
They can also be delivered to a connected device.
Diagnostic Logging
Page
Allows users to see and log start up sequences, protocol specific messages & error messages.
NOT EXACTLY WHAT YOU WERE LOOKING FOR?
Real Time Automation offers a full line of gateway products. If this isn’t the one
you were looking for chances are we still have right solution for you. Give us a
call at 1-800-249-1612 or check out a listing at www.rtaautomation.com/products.
We also offer custom gateways to help customers dealing with unique needs or
proprietary protocols.
CATALOG #
DESCRIPTION
460ECETC
EtherNet/IP Adapters to Allen-Bradley PLC Gateway
For More Information:
1-800-249-1612
[email protected]
.
www.rtaautomation.com
2014 Copyright Real Time Automation. All rights reserved. The Real Time Automation logo is a registered trademark of Real Time Automation Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement