Catalogue Sheet: Invisilite® Series

Catalogue Sheet: Invisilite® Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
INVISILITE SERIES
™
Remote Fixture
Supply and install Ready-Lite® Invsilite™ Series of remote fixture: The unit shall be designed to be concealed
in walls or ceilings with a cavity. The unit equipment shall be completely concealed in the wall or ceiling
in the absence of remote power. Upon DC power supply the unit will rotate its door by 180° to expose
the emergency lamps, and power them. After the DC power disconnect the lamps will turn off and
the unit will conceal the heads by rotating the door by 180°. The DC-remote unit shall not require the
presence of AC power in order to open or close the door. Under normal conditions, the only visible parts
of the unit shall be the off-white flat door and trim plate that can be customized on site with paint or other
suitable wall covering. The light source shall be MR16 halogen or LED lamps of specified wattage and
light output.
The remote unit shall be the Ready-Lite® model:
.
WIRE GUARDS
FEATURES
• Remote only visible upon power failure
• Front can be painted or wallpapered
on-site to match existing decor
• Fully automatic operation: The unit door
opens upon supply with DC voltage
from battery and closes after voltage
disconnect
• Time delay option required on battery
unit to properly close the door
• AC line voltage not required
• Emergency lights: Two high efficacy
MR16 halogen or MR16 LED lamps
• Certification: CSA C22.2 No.141
460.0082-RL
wall mount
REPLACEMENT LAMPS: MR16
MODEL
LAMP TYPE
VOLTAGE/WATTAGE
580.0080-RL
580.0064-RL
580.0083-RL
580.0076-RL
580.0068-RL
580.0090-RL
580.0089-RL
580.0070-RL
580.0077-RL
580.0084-RL
580.0078-RL
580.0093-RL
580.0100-RL
580.0104-RL
580.0106-RL
580.0098-RL
MR16 12W flood
MR16 20W flood
MR16 35W flood
MR16 50W flood
MR16 IR 20W flood
MR16 IR 35W flood
MR16 IR 50W flood
MR16
MR16
MR16
MR16
MR16, LED
MR16, LED
MR16, LED
MR16, LED
MR16, LED
12V-12W
12V-20W
12V-35W
12V-50W
12V-20W high-output
12V-35W high-output
12V-50W high-output
24V-12W
24V-20W
24V-35W
24V-50W
12V-4W
12V-6W
12V-5W
12V-6W
24V-4W
For the complete list, please see the lamp chart on pages 166 to 168
DIMENSIONS
Dimensions are approximate and subject to change.
3-3/4” [9.6 cm]
DC VOLTAGE JUNCTION BOX
7-1/4” [18.3 cm]
7-1/4” [18.3 cm]
9-1/8” [23.1 cm]
ORDERING INFORMATION
SERIES
HIDR= DC remote fixture
(no AC voltage required)
REMOTE VOLTAGE
12= 12VDC remote*
24= 24VDC remote**
*The remote fixture is compatible with all Invisilite™
battery units
** 1
2V-24V battery unit must include the time delay
function and exclude diagnostic to close door:
consult factory for details.
LAMP WATTAGE
/LD7= 2X MR16 LED, 12V-4W
/LD9= 2X MR16 LED, 12V-5W
/LD10= 2X MR16 LED, 12V-6W
/LD13= 2X MR16 LED, 24V-4W
/LD14= 2X MR16 LED, 24V-6W
/12= 2X MR16 halogen, 12W
/20= 2X MR16 halogen, 20W
/35= 2X MR16 halogen, 35W
/50= 2X MR16 halogen, 50W
/20H= 2X MR16-IR halogen, 12V-20W, high output
/35H= 2X MR16-IR halogen, 12V-35W, high output
/50H= 2X MR16-IR, halogen, 12V-50W, high output
EXAMPLE: H1DR12/12
150
OPTIONS
TB= T-Bar mounting kit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement