Samsung 07660-2112 Setup guide

Samsung 07660-2112 Setup guide
USB2
USB2
HDMI IN 4
(HDD)
USB1
For the very best picture quality, select HD signal sources and use HDMI cables and connections.
Note that many digital cable programs are not in HD. Check with your video provider to ensure your
are receiving HD signals.
Connecting an audio device
HD connection (up to 1080p)
Using an HDMI Cable
HDMI OUT
The HDMI connection carries
digital video and audio.
HDMI IN 4
Connect your TV to your Home Theater or other audio
device to enjoy enhanced sound quality.
Analog Audio connection
Using an Audio Cable
Device
Device
AUDIO IN
Amplifier / DVD Home Theater
DVD / Blu-Ray player / HD Cable Box /
HD Satellite receiver (STB)
(HDD)
USB1
Please do not return this unit.
If you have problems operating your
TV, call:
1-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12 AM EST.
To register this product, visit : www.samsung.com/register.
AV IN 2
AV IN 2
Connecting an AV device (Blu-ray player, cable/satellite box, etc.)
USB2
STOP
(HDD)
USB1
Congratulations on the purchase of your new Samsung TV. Read this
setup guide to get your TV up and running quickly.
HDMI IN 4
Step 4 : Connect External Devices
Quick Setup Guide
AV IN 2
Digital Audio connection
USB2
Best Connection
Getting Started
Using an Optical Cable
HDMI IN 4
HD connection (up to 1080p)
Digital Audio System
Using an DVI to HDMI Cable
(HDD)
USB1
Step 1 : Install the Stand
OPTICAL
AUDIO OUT
AV IN 2
USB2
Follow the steps below to connect the TV to the stand.
DVD / Blu-Ray player /
Cable Box /
Satellite receiver (STB)
DVI OUT
HDMI IN 4
✎✎ Make sure to distinguish between the front and back of the Stand and Guide
(HDD)
USB1
Stand when assembling them.
✎✎ Make sure that at least two people lift and move the LCD TV.
✎✎ Lay the product down, with the screen facing up and fasten the screws.
Device
Connect your TV to a PC to use it as a Monitor.
Very Good Connection
AV IN 2
Connecting a PC
HD connection
Using an D-Sub Cable
Component connection (up to 1080p)
Using a Component Cable
1
AUDIO OUT
COMPONENT OUT
PC OUT
AUDIO OUT
Device
PC
VCR / DVD / Blu-ray player / Cable Box
/ Satellite receiver
Audio/Video connection (480i only)
Good Connection
Using an Audio/Video Cable
VIDEO OUT
Using an HDMI Cable
VCR
AUDIO OUT
AUDIO OUT
2
VCR / DVD / Blu-ray player / Cable Box /
Satellite receiver
Step 5 : Run Plug & Play
When you turn on your TV for the first time, it automatically launches
the Plug & Play function. With Plug & Play, you can select the On
Screen Display language, set the clock mode, and launch the TV’s
channel memorizing process. It also displays connection instructions
similar to those in this guide.
Screw
Step 2 : Install the Batteries into the Remote
To install batteries into your remote control, follow these steps:
2.
Lift the cover on the back of the remote upward
as shown in the figure to the right.
To turn on your TV, press the Power button on the remote or press
the Power button on the TV. To run Plug & Play, follow these steps:
Install two AAA batteries.
Select Language of the OSD.
1
the batteries to the diagram in the battery
compartment.
Language
Replace the cover.
English
Español
: English
Français
Air
Start
Cable
Start
Auto
Start
Step 3 : Connect Power and Antenna or Cable
If your TV is only attached to an antenna, select Air. If your TV is only
attached to cable and you have no cable box, select Cable. If your
TV is attached to an antenna and cable with no box, select Auto.
When done, press EnterE button on your remote. The Select
Cable System screen appears.
IMPORTANT: If your TV is attached to a cable or satellite box,
skip Steps 3 through 5. After Plug & Play is complete, set your TV to
Channel 3 or 4, according to the directions for your cable or satellite box.
Selects the cable system.
4
or
Use a 75 ohm (round) cable.
Power Input
2
Store Demo
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Start
Home Use
L Move E Enter
Select Home Use, and then press EnterE button. If you select
Store Demo, the TV will reset your picture and audio settings every
30 minutes. After you press EnterE button , the Antenna Source
screen appears.
Cable : --
Cable
28
15%
9
The Enjoy your TV screen
appears. Then press
EnterE button.
Stop
E Enter m Skip
The TV memorizes the available channels. This process can take
up to 45 minutes.
Plug & Play
Set the Clock Mode.
6
Auto
: English
Manual
Clock Mode
After the TV has memorized the channels, choose the Clock
Mode. Select Auto if you have a digital channel in your area. Select
Manual if you don’t, or if you have a cable or satellite box. When
done, press EnterE button.
✎✎ If you select Manual, the clock setting screen appears.
U Move E Enter m Skip
Select ‘Home Use’ when installing this TV in your home.
• Wall cable jack or
• VHF/UHF
Antenna or
• Cable or Satellite
box Ant or Cable
Out
DTV Cable : --
U Move E Enter m Skip
Plug & Play
Plug & Play
Connect Ant In to:
5
U Move E Enter m Skip
U Move E Enter
On the Language screen, select the language for the On Screen
Display (OSD) using your remote control, and then press
EnterE button. The Home Use screen appears.
8
Auto Program in Progress.
Select the Antenna source to memorise.
3
After the time zone screen,
The connection method
for best HD screen quality
is displayed. Press Right
arrow button on your
remote to view each screen
in succession. Press the
Menu button to skip this
section.
Plug & Play
Plug & Play
To navigate while Plug & Play is running, press the Up, Down, Left or
Right arrow buttons on your remote. To make a selection, press the
EnterE button. To skip a screen, press the Menu button.
Plug & Play
✎✎ Make sure to match the + and - ends of
3.
PC
Lowest Quality Connection
Stand
1.
DVI OUT
If your TV is attached to a cable system and you have no cable box,
you must select your cable system type. If you have Digital cable, you
must select the cable system type for both Analog and Digital.
After you have selected the cable system type, select Start, and then
press the EnterE button on your remote.
✎✎ Most cable systems are Standard (STD) systems. If you are not
sure about what kind of cable system you have, contact your
cable company.
Plug & Play
Set to daylight saving time.
7
DST
Off
: English
On
Auto
U Move E Enter m Skip
Select the daylight savings time setting: Off, On, or Auto, and then
press EnterE button.
English - 1
[LC350-QSG]BN68-02621A-04Eng-0831.indd 1
2010-09-01 �� 8:54:04
Basic Functions
Changing the Screen Size
Changing the Picture Mode
Your TV has several screen size options, each designed to work best with specific
Your TV has three preset Picture Modes with factory adjusted settings, each
types of video input. If you have a cable box or satellite receiver, it may have its own designed to give you an excellent picture under specific conditions.
set of screen sizes as well.
The Picture Modes are listed and described in the table below:
To change the screen size, press the P.Size button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
Mode
Description
the P.Size button, you change the size of the picture on the screen.
Brightens picture. For a vibrant, enhanced image in brightly lit or
Dynamic
The following sizes are available:
sunny room.
Standard
Zoom 1
Wide Fit
Zoom 2
4:3 Standard screen
Screen Fit
✎✎ Screen Fit displays a full HD picture covering the entire screen with no cutoff
on any side. It is only available when your TV inputs an HDMI (720p, 1080i,
1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/
DVD player, a cable/satellite box, antenna or a
cable TV input. Sources can be connected to
your TV through the HDMI, DVI, Component,
Composite, or D-sub connections, or through the
Antenna or Cable In connections.
You can enjoy photo, music, and movie files
stored on a USB device by connecting it to the
TV and using the Media Play feature. To connect
a USB device for Media Play, follow these steps:
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the Source button on your remote. Each time
you press the Source button, you change to a different source.
Changing Channels and Adjusting the Volume
To change the Picture Mode, follow these steps:
16:9 Wide screen
Connecting a USB Device for Media Play
For a bright, detailed picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
Movie
Selecting a Source
1.
With the TV on, press the Tools button on your remote.
The Tools menu appears.
2.
Using the ▲ or ▼ on your remote, select Picture mode.
3.
On the Picture Mode menu, use the ◄ or ► on your remote to select
the Picture Mode you want.
4.
Press the Exit button to exit the menu.
MEDIA.P
Menu
MEDIA.P
When done using the menu, press the Exit button on your remote to exit.
A
B
C
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
You can also change the
channels by pressing the
z buttonsA on B
the front panel of your TV
and adjust the volume by
pressing the y
buttons.
View the Media Play.
D
C
R Return
Change the channels by pressing
the z button on the remote.
D
1.
Turn on your TV.
2.
Using your remote, press the
Menu button on your remote.
Then, select Setup → Time.
A
B
C
A
Select Clock Mode, and then
press the EnterE button.
Set Clock Mode to Auto or
Manual.
✎✎ Select Auto if you have a
D
Power Indicator
B
C
D
Cut off the sound temporarily.
Change channels.
Display the main on-screen menu.
Clock Set
Month
Day
Year
--
--
----
Hour
Minute
am/pm
--
--
--
L Move U Adjust E Enter R Return
digital channel in your area
and are not using a cable/sat box.
Return to the previous channel.
MEDIA.P
E Enter
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
Press number buttons for direct access to channels.
Displays the channel list on the screen.
L Move
Setting the Clock
3.
Adjust the volume.
When the Application selection
screen appears, press the
EnterE button on your remote
to select Media Play (USB).
Remote control sensor
3.
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
3.
satellite box, change the channel
using the box’s remote.
Press the ▲ or ▼ button on your remote to
select a menu option, and then press the EnterE button.
Turns the TV on and off.
Connect a USB device containing
photo, music and/or movie files
to the USB jack on the rear of the
TV.
MEDIA.P
MEDIA.P
Adjust the volume by pressing the
y button on the remote.
2.
Remote Control Buttons and Functions:
2.
USB Drive
✎✎ If your TV is attached to a cable or
To view the On Screen Menus, follow these steps:
With the power on, press the Menu button
on your remote. The main menu appears.
The menu’s left side has the following menu
options: Picture, Sound, Channel, Setup,
Input, Application, and Support.
Turn on your TV.
Channel
Volume
Viewing the On Screen Menus
1.
1.
TV Rear Panel
4.
Select Clock Set, and then press the EnterE button. The Clock Set screen
appears.
5.
Using the number buttons on your remote, enter the month, day, year, hour,
and minute. Use the ◄ or ► button to move between entry fields.
6.
Press the Return button on your remote when done.
Displays Favorite Channel Lists on the screen.
Quickly selects frequently used functions.
Press to display information on the TV screen.
Use these buttons to select On Screen Menu items and
change menu settings.
Exit the menu.
Return to the previous menu.
Colored buttons for use in the Channel List, Media Play
menu, etc.
A
B
C
D
MTS: Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
P.SIZE: Picture size selection.
CC: Controls the caption decoder.
BN68-02621A-04
English - 2
[LC350-QSG]BN68-02621A-04Eng-0831.indd 2
2010-09-01 �� 8:54:07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement