M-System MXAB Analog Backup Station Instruction manual

Below you will find brief information for Analog Backup Station MXAB. This document provides instructions for installation, connection and basic maintenance procedures. A quick warm-up of 10 minutes is necessary for satisfying complete performance described in the datasheet. This device is equipped with programmable features to adjust input and output ranges, decimal point position and response time. The MXAB is designed to function as soon as power is supplied, however, a warm up for 10 minutes is required for satisfying complete performance described in the data sheet.

PDF Download
Document
Analog Backup Station MXAB Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Programmable input/output ranges
  • Adjustable decimal point position
  • Configurable response time
  • Power-saving mode
  • Manual control mode
  • DIN-rail mounting
  • Wall mounting
  • Reset all settings
  • Calibration

Frequently asked questions

A warm-up for 10 minutes is required for satisfying complete performance described in the datasheet.

You can program the input and output ranges by selecting the appropriate values for ITEM 27/28 and ITEM 29/30 respectively, using the DATA UP/DOWN keys in Program Mode.

To reset all settings to factory defaults, choose ITEM 01 - DATA 3, call up the Reset menu by choosing ITEM 33 - DATA 1, and then double-click the DATA DOWN key. After initialization is complete, the display will show DATA 0.

The MXAB should be used indoors, with temperatures between -5 to +55°C and relative humidity between 30 to 90% RH. Avoid installing the unit in environments with heavy dust or metal particles, continuous vibration, or where it is subjected to physical impact.
ALP:
Preparing document for printing…
0%