CAN-2018D spec eng

CAN-2018D spec eng
8-channel Thermocouple Input Module of DeviceNet Slave
CAN-2018D
The CAN-2018D follows DeviceNet specification Volume I/II, Release 2.0. User can access the
thermocouple input status and set the configuration via DeviceNet EDS file. This module has 8
differential thermocouple input channels. By the DeviceNet masters of ICP DAS, you can quickly
build a DeviceNet network to approach your requirements.
I/O Pin & Wire Connection
DeviceNet general I/O slave devices
Comply with DeviceNet specification Volume I,
Release 2.0 & Volume II, Release 2.0, Errata 5
Group 2 Only Server (non UCMM-capable)
Support Predefined Master/Slave Connection Set
Connection supported:
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O connection
Support DeviceNet heartbeat and shutdown messages
Provide EDS file for DeviceNet master interface
Internal I/O Structure
CAN Pin & Baud Rate Rotary
Baud rate
rotary switch
3-35
CAN Interface
DeviceNet Specification
DeviceNet subscribe
Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5
Group 2 Only Server
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
Connection supported
Node ID
Baud Rate (bps)
Heartbeat/Shutdown message
Terminator Resistor
0~63 selected by rotary switch
125 kbps, 250 kbps, 500 kbps
Yes
Switch for 120 Ω terminator resistor
Analog Input
Channels
8 Differential
+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V
-20mA ~ +20mA(Requires Optional External 125Ω Resistor)
Thermocouple(J, K, T, E. R. S, B, N, C)
16-bit
10 Samples/ sec (Total)
+/-0.1% FSR
4 kV Contact for each channel
Input Type
Resolution
Sampling Rate
Accuracy
ESD Protection
LED
Round LED
PWR LED, NET LED, MOD LED
Power
Input range
Power Consumption
Unregulated +10 ~ +30 VDC
1.5 W
Mechanism
Installation
Dimensions
DIN-Rail
33 mm x 99 mm x 78 mm (W x L x H)
Environment
-25 ~ 75 ℃
Operating Temp.
Storage Temp.
Humidity
-30 ~ 80 ℃
10 ~ 90% RH, non-condensing
Applications
Ordering Information
CAN-2018D/S
DeviceNet Slave Module of 8-channel Thermocouple Input
Include CAN-2018D module and a CN-1824 daughter board
3-36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement