Atcom AX4G Quick Start Guide

Add to my manuals
15 Pages

advertisement

Atcom AX4G Quick Start Guide | Manualzz

AX4G Quick Start Guide with Elastix2.4.0

Version: 2.0

2013-07-12

AX4G Quick Start Guide

Release note

Version Changed note

1.0 First Release

2.0 Release the Quick start Guide

Editor

Deniel

Date

2013-07-12 www.atcom.cn Email: [email protected]

AX4G Quick Start Guide

Content

1. Install ax2g4a/ax4g driver ......................................................................................................... 1

1) Download the driver from ATCOM download center .......................................................... 1

2) Load the files via the U-flash ................................................................................................ 1

3) Install the driver .................................................................................................................... 1

4) Compatibility with the driver ................................................................................................ 2

2. How to configure your PBX ..................................................................................................... 3

2.1. Log into the Elastix webpage ............................................................................................. 3

2.2. Detect the hardware ........................................................................................................... 3

2.3. Configurate your PBX........................................................................................................ 4

2.3.1 Configure the PBX ................................................................................................ 4

2.3.2 Add an SIP Extension ........................................................................................... 4

2.3.3 Add a ZAP/DAHDI Trunk .................................................................................... 6

2.3.4 Add an Incoming Route ........................................................................................ 7

2.3.5 Add outbound route ............................................................................................... 7

3. Appendix: the parameter for billing .......................................................................................... 9

www.atcom.cn Email: [email protected]

AX4G Quick Start Guide

Contact ATCOM

The Introduction of ATCOM

ATCOM is the leading VoIP hardware manufacturer in global market. We have been keeping innovating with customer’s needs oriented , working with partners to establish a total solution for

SMB VoIP with IP phone , IP PBX and Asterisk cards.

With over 10 years’ experience of R&D , manufacturing and service in network and VoIP filed ; mission of creating the biggest value for IP terminals , we commit ourselves in supplying the competitive IP phone and other terminals for IP PBX , softswitch , IMS , NGN providers and carriers; supplying the competitive total VoIP solution for SMB market. We keep improving the customer’s experience and creating the bigger value with our reliable products. Until now , our

VoIP products has been sold to over 60 countries and used by millions of end users.

Contact sales:

Address

Tel

Fax

E-mail

District C, east of 2nd floor, #3, Crown industry buildings, Chegongmiao

Industry area, Futian district, Shenzhen, China

+(86)755-23487618

+(86)755-23485319 [email protected]

Contact Technical Support:

Tel

E-mail

+(86)755-23481119

[email protected]

Website address:

http://www.atcom.cn/

Download Center:

http://www.atcom.cn/download.html

www.atcom.cn Email: [email protected]

AX4G Quick Start Guide

Test Environment

Elastix2.4.0 OS

Asterisk-1.8.20

Dahdi-linux-complete-2.6.2+2.6.2 www.atcom.cn Email: [email protected]

AX4G Quick Start Guide

1Install ax2g4a/ax4g driver

1) Download the driver from ATCOM download center

Notice:

Users should download the latest drivers for the GSM card from ATCOM download center: http://www.atcom.cn/download.html

For example, users can get the driver with the command. wget http://www.atcom.cn/cn/download/cards/ax4g/ax2g4a_ax4g_elastix2.4.0.tar.gz

2) Load the files via the U-flash

Please plug the U-flash into the system. If the U-flash is detected by the server. Users need just runt the commands to load the U-flash.

[root@localhost ~]# mount /media/ ; mount the U-flash

[root@localhost ~]# cd /media/

[root@localhost ~]# cp ax2g4a_elastix2.4.0.tar.gz /usr/src/

[root@localhost ~]# ls /usr/src/

[root@localhost ~]# umount /media/ ; unmount the U-flash

3) Install the driver

When users install the driver with elastix, users need just tar the package and run the script.

Normally, the script will install the driver automatically.

[root@localhost src]# tar -zxvf ax2g4a_elastix2.4.0.tar.gz

[root@localhost src]# cd ax2g4a_elastix2.4.0

[root@localhost elastix_ax2g4a_driver]# ./ax4g_install.sh www.atcom.cn Email: [email protected] 1

AX4G Quick Start Guide

Notice:

If users install the Elastix2.4.0 version correctly, the progress will cost 10 minutes. After that, users will get the following illustration when the driver is installed completely.

4) Compatibility with the driver

When users install the driver correctly, it will be compatible with all the atcom asterisk cards. It means users need not install drivers for other atcom cards. For examples:

Card named ax400p/axe400p

Module named wctdm ax800/axe800p ax1600p/axe1600p ax4g/ax2g4a ax1600p ax1600p ax4g ax1d/axe1d/axe1dl ax2d/axe2d/axe2dl ax4d/axe4d/axe4dl ax4b/axe4bl/axe2bl

AX1D wct4xxp wct4xxp wcb4xxp www.atcom.cn Email: [email protected] 2

AX4G Quick Start Guide

2How to configure your PBX

2.1. Log into the Elastix webpage

Please open the browser and input the server IP address, And then clink on the submit button as the following illustration.

2.2.Detect the hardware

Users can click the “Hardware Detection” button to detect the hardware by the system automatically. www.atcom.cn Email: [email protected] 3

AX4G Quick Start Guide

For example, if users have install the drivers for AX4G card firstly, users will get the following illustration.

2.3. Configurate your PBX

2.3.1 Configure the PBX

Click the PBX button to jump into the pbx configuration page.

2.3.2 Add an SIP Extension

Click the “Add an extension --> Generic sip Device”. And then input the “Users Extension”, the “Display Name”, and “Secret”; Click the submit in the following illustration. www.atcom.cn Email: [email protected] 4

AX4G Quick Start Guide

Then , Click the “Apply Configuration Changes Here” bar in the top of the screen. www.atcom.cn Email: [email protected] 5

AX4G Quick Start Guide

2.3.3 Add a ZAP/DAHDI Trunk a) Choose the “Add Zap Trunk (DAHDI compatibility) ”button. b) Set the Trunk Description: enter the name what you have set. Then choose the Dial Rules

Identifier:g0. click on submit in the following illustration. c) Then , Click the “Apply Configuration Changes Here” bar in the top of the screen. www.atcom.cn Email: [email protected] 6

AX4G Quick Start Guide

2.3.4 Add an Incoming Route

Add an incoming route, it will help you get incoming calls. a) Click on “Inbound Routes” bar. b) Input incom9 in the textbox of Description as the following screen: c) Click the Extensions textbox, choose an extension number from the drop down selection box.

Then click submit. Please refer to the following illustration: d) Click the “Apply Configuration Changes Here” bar in the top of the screen.

2.3.5 Add outbound route

Add an outbound route, it will help you get outbound calls. a) Click on “outbound Routes” bar. www.atcom.cn Email: [email protected] 7

AX4G Quick Start Guide b) Input out_route9 in the textbox of Description as the following screen: c) In the Dial Patterns , please input “9|.” , it will help you get calls before you called number.

Please refer to the following illustration: d) Choose the Trunk Sequence: ZAP/g0 ,Then click submit. Please refer to the following illustration: e) Click the “Apply Configuration Changes Here” bar in the top of the screen. www.atcom.cn Email: [email protected] 8

AX4G Quick Start Guide

3Appendix: the parameter for billing

1.Two kinds of configuration for the billing.

1) If users need the GSM modules for billing, but the FXO needn't, please edit the configuration files like the following: a. Make sure the parameters is disabled in the “/etc/asterisk/chan_dahdi.conf” file.

;answeronpolarityswitch=yes

;polarityonanswerdelay= 300 b. Add the billing parameters into the “/etc/dahdi-channels.conf” file.

------------------------------------------------------------------------------------------

;;; line="1 WCTDM/6/0 FXSKS (In use) (SWEC: MG2)" signalling=fxs_ks answeronpolarityswitch=yes polarityonanswerdelay= 300 callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default

------------------------------------------------------------------------------------------

Please add the parameters to the FXO module channels like the following:

------------------------------------------------------------------------------------------

;;; line="5 WCTDM/6/4 FXOKS (In use) (SWEC: MG2)" signalling=fxo_ks answeronpolarityswitch=no callerid="Channel 5" <4005> mailbox=4005 group=5 context=from-internal channel => 5 callerid= mailbox= group= context=default

------------------------------------------------------------------------------------------ www.atcom.cn Email: [email protected] 9

AX4G Quick Start Guide

2) If users need the GSM and FXO billing simultaneously, please edit the billing parameters like the following.

[root@centos6 ~]# vi /etc/asterisk/chan_dahdi.conf answeronpolarityswitch=yes polarityonanswerdelay= 300

Notice:

If user need the FXO module billing, please apply for your SP(Server Provider) who will enable the billing signal to FXO module. www.atcom.cn Email: [email protected] 10

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement