MG04-4C
Industrial Ethernet Switch Managed Gigabit Ethernet Switch
v1.41 / Dec, 2011
Features
Industrial 8-port managed Gigabit Ethernet switch with
4x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket
Industrial
Media Converter
▪ Fastest Redundant Ethernet Ring: O-Ring (recovery time < 20ms
over 250 units of connection)
▪ Open-Ring support the other vendor’s ring technology in open
architecture
▪ O-RSTP support applications with complex topology
▪ STP/RSTP/MSTP supported
▪ Supports PTP Client (Precision Time Protocol) clock synchronization
▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
▪ Port Trunking for easy of bandwidth management
▪ SNMP v1/v2c/v3 support for secured network management
▪ RMON for traffic monitoring
▪ Supports DDM (Digital Diagnostic Monitoring) function
▪ Supports LLDP (Link Layer Discovery Protocol)
▪ Event notification through Syslog, Email, SNMP trap, and Relay Output
▪ Port lock to prevent access from unauthorized MAC address
▪ Windows utility (Open-Vision) support centralized management
and configurable by Web-based ,Telnet, and Console (CLI)
▪ Supports eight Gigabit ports
▪ Rigid IP-30 housing design
▪ DIN-Rail and wall mounting enabled
Industrial
Ethernet Switch
MG04-4C
Industrial
Device Server
Industrial Wireless
Access Point
ORing’s switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for
user to manage and monitor all of industrial Ethernet switches on the industrial network.
D esigned for Rugged Exce llence
Network
Management Utility
Open-Vision
Accessories
MG04-4C is managed redundant ring Ethernet switch with 4x10/100/1000Base-T(X) and 4xGigabit Combo ports. With complete support of Ethernet
redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/
D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. MG04-4C can be managed
centralized and convenient by a powerful windows utility — Open-Vision. MG04-4C support new DDM (Digital Diagnostic Monitoring) function, which can
monitor instantly the status of electrical voltage, current and temperature. The redundant DC power inputs guarantee a non-stop operation. The backup power
input will take over immediately when the primary DC power input fails. MG04-4C provides relay outputs that can be set up to indicate events with urgency to notify
or warn the technicians, so they can quickly respond to the message in priority. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber
Ethernet application.
Industrial Cellular
VPN Router
Introduction
1-47
Industrial Ethernet Switch Managed Gigabit Ethernet Switch
1
v1.41 / Dec, 2011
Network connection
DDM function
Industrial Ethernet Switch
Topology View
Monitoring and Configuration interface
Dimensions
(Unit=mm)
1-48
w w w.oring-net wo rk i n g. co m
Industrial Ethernet Switch Managed Gigabit Ethernet Switch
v1.41 / Dec, 2011
Industrial
Ethernet Switch
Specifications
MG04-4C
ORing Switch Model
Physical Ports
4
Gigabit Combo Ports with 10/100/1000Base-T(X) and
100/1000Base-X SFP Port
4
Industrial
Media Converter
10/100/1000Base-T(X) Ports in RJ45
Auto MDI/MDIX
Technology
Processing
Store-and-Forward
Switch Properties
Switching latency : 7 μs
Switching bandwidth : 16Gbps
Max. Number of Available VLANs : 4096
IGMP multicast groups : 1024
Port rate limiting : User Define
Security Features
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMPv3 encrypted authentication and access security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronizing Function
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Network Redundancy
O-Ring
Open-Ring
O-RSTP
STP
RSTP
MSTP
Warning / Monitoring System
Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
Network
Management Utility
RS-232 Serial Console Port
Accessories
4
Industrial Cellular
VPN Router
8192 MAC addresses
Priority Queues
Industrial Wireless
Access Point
MAC Table
Industrial
Device Server
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
LED Indicators
Power Indicator
Green : Power LED x 3
R.M. Indicator
Green : Indicates that the system is operating in O-Ring Master mode
Ring Indicator
Green : Indicates that the system is operating in O-Ring mode
Fault Indicator
Amber : Indicates unexpected event occurred
D esigned for Rugged Exce llence
1-49
Industrial Ethernet Switch Managed Gigabit Ethernet Switch
v1.41 / Dec, 2011
10/100/1000Base-T(X) RJ45 port Indicator
Green for port Link/Act. Amber for 100Mbps indicator
100/1000Base-X SFP port Indicator
Green for port Link/Act.
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Industrial Ethernet Switch
1
Redundant Input Power
Dual DC inputs. 12~48 VDC on 6-pin terminal block
Power Consumption (Typ.)
25 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
74.3(W)x109.2(D)x153.6(H) mm (2.93x4.3x6.05 inch)
Weight (g)
1075g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals
EMI
Shock
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,
EN61000-4-11
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
EMS
Safety
EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )
214,978
Warranty
5 years
Ordering Information
I G S - 3 AA B CC
Code Definition
10/100/1000Base-T(X) Port Number
Option
Available
Model
- 04: 4 ports
Model Name
MG04-4C
Packing List
‧MG04-4C
‧DIN-Rail Kit
‧Wall-mount Kit
‧Console Cable
‧ORing Tool CD
‧Quick Installation Guide
1-50
w w w.oring-net wo rk i n g. co m
Additional Port Number
- 4: 4 ports
Additional Port Type
-GC : Gigabit Combo Port
Description
Industrial 8-port managed Gigabit Ethernet switch with 4x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket
Optional Accessories (Can be purchased separately)
‧Open-Vision M500, Powerful Network Management Windows Utility Suite, 500 IP devices
‧SFP100 series, 100Mbps SFP optical transceiver
‧SFP1G series, 1Gbps SFP optical transceiver
‧DR-45 series, 45W DIN-Rail power supply
‧DR-75 series, 75W DIN-Rail power supply
‧DR-120 series, 120W DIN-Rail power supply
‧SDR-240-48, 240W DIN-Rail power supply
‧SDR-480-48, 480W DIN-Rail power supply
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising