Datalogic | Dragon D131 | Dragon D131

CONNECTIONS
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its
website. Log on to www.datalogic.com and click on the links indicated for further
information including:
•
•
PRODUCTS
CONNECTING THE CABLE
USB
Dragon™ D131
Search through the links to arrive at your product page where you can
download specific Manuals and Software & Utilities including:
READERS
- Datalogic Aladdin™ a multi-platform utility program, which allows device
configuration using a PC. It provides RS232/USB-COM interface
configuration as well as configuration barcode printing.
QUICK REFERENCE
SERVICES & SUPPORT
- Datalogic Services - Warranty Extensions and Maintenance Agreements
- Authorised Repair Centres
•
CONTACT US
E-mail form and listing of Datalogic Subsidiaries
WARRANTY
Datalogic warranties this product against defects in workmanship and materials,
for a period of 3 years from the date of shipment, provided that the product is
operated under normal and proper conditions.
Datalogic has the faculty to repair or replace the product; these provisions do not
prolong the original warranty term.
The warranty does not apply to any product that has been subject to misuse,
accidental damage, unauthorized repair or tampering.
820001771 (Rev. A)
DATALOGIC S.p.A.,
Via Candini, 2
40012 - Lippo di Calderara
Bologna - Italy
UPDATES AND LANGUAGE AVAILABILITY
The latest drivers and documentation updates for this product are available on
Internet.
Log on to: www.datalogic.com
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
92/31/EEC, 93/68/EEC
E
c Slip the cover over the
cable.
d Push the rubber boot
completely
over
the
connector. Take care that
the rubber boot mark is
aligned to the connector
clip.
e Pull the rubber boot
towards the connector until
it covers and is flush with
the connector moulding.
f Lock the rubber boot clip
around the rubber boot
aligning them as shown in
the figure.
g Insert
the
assembly
(connector + rubber boot
locked through clip) into
the reader connector.
Push the cover along the
cable towards the reader
handle and make it hook
over the yellow tooth
therefore
closing
the
handle.
h Insert the strain relief into
the cover.
i Insert the screw into the
strain relief and tighten to
fix the whole assembly to
the reader handle.
Align
Align
WEDGE
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di
questo prodotto. Questo manuale è disponibile anche nella versione italiana.
Collegarsi a: www.datalogic.com
emendamenti successivi
further amendments
ses successifs amendements
späteren Abänderungen
succesivas enmiendas
F
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei
prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des
produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y
las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
Les versions mises à jour de drivers et documentation de ce produit sont
disponibles sur Internet. Ce manuel est aussi disponible en version française.
Cliquez sur : www.datalogic.com
4
1
RS232
5
6
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation
von diesem Produkt. Die deutschsprachige Version dieses Handbuches ist auch
verfügbar.
Adresse : www.datalogic.com
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE
CHARACTERISTICS
OF
INFORMATION
TECHNOLOGY EQUIPMENT
EN 61000-6-2, October 2001:
ELECTROMAGNETIC COMPATIBILITY (EMC).
PART 6-2: GENERIC STANDARDS - IMMUNITY
INDUSTRIAL ENVIRONMENTS.
FOR
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto. También está disponible la versión en español
de este manual.
Dirección Internet : www.datalogic.com
7
CE COMPLIANCE
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and
EN60825-1 at the date of manufacture.
Warning:
This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
The laser light is visible to the human eye and is emitted
from the output window c.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic
could void the authority to use the equipment.
CAUTION:
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
exposure to hazardous visible laser light.
The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one would with
any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an
observer, even through reflective surfaces such as mirrors, etc.
The following information is shown on the laser scanner device class label:
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
DO NOT STARE INTO BEAM
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1.4 mW
EMITTED WAVELENGTH 630~680 nm
EN60825-1: 2001
This product complies with
21 CFR Subchapter J
ITALIANO
LUCE LASER
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI CLASSE 2
FRANÇAIS
RAYON LASER
EVITER DE REGARDER LE RAYON
APPAREIL LASER DE CLASSE 2
DEUTSCH
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
PRODUKT DER LASERKLASSE 2
ESPAÑOL
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
LED CLASS
Ruggero Cacioppo
Quality Assurance Laboratory Manager
PEN
COMPLIANCE
D
E
EN 55022 (CLASS A ITE), August 1994:
AMENDMENT A1 (CLASS A ITE), October 2000:
Lippo di Calderara, October 30th, 2006
3
2
Laser warning and classification label d.
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
e
and
et
und
y
Rubber boot
Rubber boot clip
Cover
Strain relief
Screw
LASER SAFETY COMPLIANCE
UK/US
DRAGON Dxxx
89/336/EEC EMC Directive
C
D
06
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
A.
B.
C.
D.
E.
A
B
CAUTION - CLASS 2 LASER
LIGHT WHEN OPEN
AVOID EXPOSURE – LASER LIGHT
IS EMITTED FROM THIS APERTURE
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which supplies
power directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked
“Class 2” or LPS power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to
the reader via the power connector of the cable.
WEEE COMPLIANCE
PATENTS
This product is covered by one or more of the following patents:
U.S. patents 5,992,740; 6,305,606 B1; 6,442,180 B1; 6,808,114 B1; and 6,997,385 B2
Class 1 LED product.
European patents 789,315 B1; 895,175 B1; and 1,128,315 B1
This product conforms to EN60825-1:2001.
Additional Patents and Design Patents pending.
RESTORE DEFAULT
DEFAULT VALUES
RESTORE DEFAULT
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,
USB keyboard speed normal.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disabled.
Ì$+$*oÎ
KEYBOARD NATIONALITY
USING DRAGON™ D131/D131 LR READERS
USB-KBD and Wedge users should select one of the following wedge keyboard
nationality codes according to the keyboard.
Dragon™ D131 readers automatically scan barcodes at a distance. Simply aim
and pull the trigger. Code scanning is performed along the scan line emitted from
the reading window. This line must cross the entire code. The best reading angles
are indicated in the figure below.
Belge
To change the defaults refer to the Dragon™ D131/M131 Reference Manual, part
number 90ACC1929, or to the Datalogic Aladdin™ Configuration program, both
downloadable from the website.
Ì$+FJ7$-8Î
RS232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx
timeout 5 sec., ack/nack disabled, FIFO enabled, inter-character delay disabled,
serial trigger lock disabled.
DATA FORMAT: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = CR-LF, character replacement disabled.
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock
unchanged, inter-character and inter-code delays disabled, control character
emulation = ctrl+shift+key.
DATA FORMAT: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disable.
PEN DEFAULT SETTINGS
interpret operating mode, conversion to code 39 disabled, output level normal,
idle level normal, minimum output pulse 600 µs, overflow medium, inter-block
delay disabled.
CODE SELECTION
Enabled codes
•
•
•
•
Deutsch
Select one of the interface codes according to your application.
USB INTERFACE SELECTION
Español
Ì$+FJ6$-3Î
Ì$+UA03$-:Î
Ì$+UA04$-@Î
USB-COM*
Français
Ì$+FJ2$-ÊÎ
Ì$+UA02$-4Î
Italiano
Ì$+FJ1$-ÅÎ
* When configuring USB-COM, the relevant files and drivers must be installed
from the USB Device Installation software, which can be downloaded from the
web site http://www.datalogic.com.
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,
Code 11, Code 16K, Code 49, RSS Codes
Max. Resolution
PCS (Datalogic Test Chart)
Enable Aiming System
Ì$+CP6$-BÎ
Ì$+Bj1$-'Î
The following Keyboard Nationality selections are only valid for IBM AT compatible
PCs:
Nixdorf Mode A
4 to 30 Vdc
Russian (Latin)
Ì$+FJ9$-BÎ
Fujitsu
Ì$+CM1$-ÈÎ
ICL Mode
Ì$+CM0$-ÃÎ
Good Read LED (green)
Good Read Spot (green), Beeper
Dragon™ D131
Dragon™ D131 LR
110 cm (43.3 in)
@ 55 mils
0.076 mm (3 mils)
225 cm (88.6 in)
@ 55 mils
0.25 mm (10 mils)
15%
40%
0.9 mW
1.4 mW
Scan Angle
42°
23°
Laser Safety Class
Class 2 EN 60825-1/CDRH
Environmental Features
Working Temperature
-30 °C to + 50 °C / -22° to +122 °F
Storage Temperature
-30 °C to + 70 °C / -22° to +158 °F
Wedge IBM AT or PS/2 PCs
IEC 68-2-32 Test ED 2 m
Protection Class
IP64
Mechanical Features
about 295 g (10.4 oz)
Enter
Ì$+FJA$-jÎ
Ì$+EA1183$-0Î
Ì$+FJB$-oÎ
Tab
Ì$+EA1184$-8Î
Slovenian, Croatian, Serbian (Latin)
Ì$+CP500$-aÎ
Ì$+FJC$-tÎ
Ì$+CP505$-ÈÎ
None
Romanian
Ì$+EA10$-dÎ
Ì$+FJD$-yÎ
PC Notebook - ALT mode
Ì$+CP508$-2Î
IBM AT - ALT mode
Ì$+CP507$-+Î
90% non condensing
Drop Resistance
Ì$+EA120D0A$-ÃÎ
Russian (Cyrillic)
WEDGE INTERFACE SELECTION
PC Notebook
Power (max)
CR-LF
Hungarian
Laser Features
2 m (6 ft 6 in)
Ì$+FJ8$-=Î
Ì$+CM2EC0$->Î
DATA FORMAT TERMINATORS
For your convenience, some common Terminators are given below. For other
Header/Terminator selections, Data Format and Advanced Data Format
parameters, see the Dragon™ D131/M131 Reference Manual.
Japanese
Ì$+CP0$-$Î
Electrical Features
420 mA
310 mA
62 mA
4 mA
35 ± 5 scans/sec
Ì$+Bj0$-"Î
Ì$+FJ0$-|Î
RS232 Standard
Dragon™ D131/D131 LR
Reading Field
Disable Aiming System (Default)
PEN
RS232 INTERFACE SELECTION
TECHNICAL FEATURES
Optical Features
After setting up the reader, you can enable or disable the aiming system by
reading the codes below:
Ì$+FJ5$-.Î
PEN EMULATION INTERFACE SELECTION
Disabled codes:
Max. Consumption:
@ 4V
@ 5V
@ 30V
Sleep mode
Scan Rate
Reading Indicators
Svenskt
Dragon™ D131 and Dragon™ D131 LR provides an aiming system. If enabled, a
partial trigger press produces a red spot, which should be aimed over the code
center to get the best reading performance (see figure above, c). By completely
pressing the trigger the scan line appears to start code scanning d.
USA (Default)
Code 128
variable length code; 1-99 characters
Power Supply
AIMING SYSTEM
USB-KBD-ALT-MODE
Ì$+UA01$-.Î
Standard Code 39
no check digit control, variable length code; 1-99 characters
Cable Length
Ì$+FJ4$-)Î
USB-IBM-Hand Held
Interleaved 2/5
check digit control and transmission, variable length code; 4-99 characters
Weight (without cable)
English
USB-KBD
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
Humidity
Ì$+FJ3$-$Î
INTERFACE SELECTION
Czech Republic
Ì$+FJE$-~Î
OPERATING TEST
Read the TEST code below.
Many other interfaces are supported and can be selected from the Dragon™
D131/M131 Reference Manual available online at http://www.datalogic.com. Other
supported interfaces:
Code 128
USB: USB-IBM-Table Top; USB-KBD-APPLE
WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx,
34xx, 37xx; Wyse Terminals ANSI – PC –ASCII – VT220 style Keyboards; Digital
Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus
t
e
s
t
Download PDF