Alpine | INA-N033R | Owner`s manual | Alpine INA-N033R Owner`s manual

R
EN
INA-N033R
DE
GPS Car Navigation/CD Receiver
FR
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
IT
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• GEBRUIKSAANWIJZING
Gelieve de gebruiksaanwijzing te lezen alvorens
met dit toestel te werken.
ES
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
• BRUGERVEJLEDNING
Læs venligst denne vejledning, før du tager
enheden i brug.
NL
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Yamagata Printing Co., Ltd.
2-6-34, Takashima, Nishi-ku, Yokohama,
Kanagawa, Japan
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel.: (03) 9769-0000
ALPINE ELECTRONICS GmbH
Kreuzerkamp 7-11 40878 Ratingen, Germany
Tel.: 02102-45 50
ALPINE ITALIA S.p.A.
Via C. Colombo 8, 20090 Trezzano Sul Naviglio
MI, Italy
Tel.: 02-48 47 81
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord Il
B.P. 50016 F-95945, Roissy, Charles De Gaulle
Cedex, France
Tel.: 01-48 63 89 89
SE
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes
MK14 5BU, U.K.
Tel.: 01908-61 15 56
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava)-Apdo. 133, Spain
Tel.: 34-45-283588
Designed by ALPINE Japan
Printed in Japan (Y)
68P41262Y81-O
DK
CD changer for INA-N033R.
CD-Wechsler für INA-N033R.
Changeur CD pour INA-N033R.
Cambia CD per INA-N033R.
Cambiador de CD para INA-N033R.
CD-wisselaar voor INA-N033R.
CD-växlare för INA-N033R.
Cd-skifter til INA-N033R.
CD changer for INA-N033R.
CD-Wechsler für INA-N033R.
Changeur CD pour INA-N033R.
Cambia CD per INA-N033R.
Cambiador de CD para INA-N033R.
CD-wisselaar voor INA-N033R.
CD-växlare för INA-N033R.
Cd-skifter til INA-N033R.
CHA-S624
You cannot connect to INA-N033R.
Ein Anschluß an INA-N033R ist nicht möglich.
Il est impossible de se raccorder au INA-N033R.
Non è possibile effettuare il collegamento
a INA-N033R.
No es posible conectarlo a INA-N033R.
Aansluiting op de INA-N033R is niet mogelijk.
Du kan inte ansluta till INA-N033R.
Du kan ikke tilslutte til INA-N033R.
CHA-1214
CHM-S620
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
An Alpine CD Changer adds more musical choices to your sound system. All models except CHM-S620 can be controlled from Alpine head units and
deliver excellent sound quality. The CHA-S624 is a high-performance 6-disc changer with a new M DAC, Ai-NET compatibility, Optical Digital Output,
150 Disc Title Memory and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S620 M-Bus model is a super-compact 6-disc changer.
Von Alpine CD-Wechslern haben Sie mehr!
Mehr Musikauswahl, mehr Vielseitigkeit, mehr Komfort.
Mit einem Alpine CD-Wechsler erweitern Sie die Musikauswahl Ihres Systems. Sämtliche Modelle außer dem CHM-S620 lassen sich von einer AlpineBedieneinheit aus steuern und liefern hervorragende Klangqualität. Der CHA-S624 ist ein Ai-NET-kompatibler Hochleistungs-Wechsler für 6 CDs mit dem
neuen M-DAC, Digitalausgang für Glasfaserkabel, CD-Titelspeicher für 150 Titel und CD-TEXT. Das Ai-NET-Modell CHA-1214 nimmt 12 CDs auf, und
der M-Bus-kompatible CHM-S620 ist ein superkompakter Wechsler für 6 CDs.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Un changeur de CD Alpine permet d'augmenter la plage des sélections musicales de votre système embarqué. Tous les modèles, à l'exception du CHMS620, peuvent être contrôlés à partir des autoradios Alpine et offrent une excellente qualité audio. Le modèle CHA-S624 est un changeur 6 disques ultra
performant compatible Ai-NET et équipé d'un convertisseur N/A standard, d'une sortie optique numérique, d'une mémoire d'une capacité de 150 titres et de
la fonction CD TEXT. Le modèle CHA-1214 Ai-NET peut contenir 12 disques. Le modèle CHM-S620 M-Bus est un changeur 6 disques super compact.
I caricatori CD Alpine danno di più!
Più scelta, più versatilità, più comodità.
Un caricatore CD Alpine offre maggiore scelta. Tutti i modelli, eccetto il modello CHM-S620, possono essere controllati tramite le unità di controllo Alpine
e producono un suono di qualità eccellente. CHA-S624 è un caricatore a 6 dischi Ai NET compatibile e dotato di un nuovo M DAC, di un'uscita ottica
digitale, memorizzazione dei titoli di 150 dischi e CD TEXT. Il modello CHA-1214 Ai NET può contenere un massimo di 12 dischi, mentre il modello
CHM-S620 M-Bus è un caricatore a 6 dischi ultra compatto.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
Un cambiador Alpine de CD añade más opciones musicales a su equipo de sonido. Todos los modelos, excepto el CHM-S620, pueden controlarse desde las
unidades principales de Alpine y proporcionar un sonido de calidad excepcional. El modelo CHA-S624 es un cambiador de 6 discos de alto rendimiento con
el nuevo DAC "M" y compatibilidad con Ai-NET, salida digital óptica, memoria de títulos de 150 discos y TEXTO CD. El modelo CHA-1214 Ai-NET
admite 12 discos y el modelo CHM-S620 Bus-M es un cambiador de 6 discos y tamaño reducido.
CD-wisselaars van Alpine hebben meer te bieden!
Meer muziekkeuze, meer veelzijdigheid, meer gebruiksgemak.
Een Alpine CD-wisselaar maakt uw audiosysteem een stuk veelzijdiger. Alle modellen behalve de CHM-S620 kunnen worden bediend vanaf Alpine head
units en munten uit door een superieure geluidsweergave. De CHA-S624 is een geperfectioneerde 6CD-wisselaar met een nieuwe M DAC, Ai-NET
compatibiliteit, optisch digitale uitgang, titelgeheugen voor 150 discs en CD TEXT. De CHA-1214 Ai-NET biedt plaats aan 12 discs en de CHM-S620 M-Bus
is een supercompacte 6CD-wisselaar.
Alpines CD-växlare ger mer!
Fler musikval, mer variation, större bekvämlighet.
Med Alpines CD-växlare i systemet får du större musikalisk valfrihet. Alla modeller, utom CHM-S620, kan styras från Alpines huvudenheter och ger enastående
ljudkvalitet. CHA-S624 är en högpresterande växlare för 6 skivor med en ny M D/A-omvandlare, kompatibel med Ai-NET, optisk digitalutgång, titelminne för
150 skivor och CD-TEXT. Modellen CHA-1214 Ai-NET rymmer 12 skivor och modellen CHM-S620 M-Bus är en superkompakt växlare för 6 skivor.
Med Alpine-cd-skiftere får du mere!
Flere musikvalg, mere alsidighed og mere bekvemmelighed.
En Alpine-cd-skifter giver dig flere musikvalg til lydsystemet. Alle modeller med undtagelse af CHM-S620 kan styres fra Alpine-hovedenheder og giver
fremragende lydkvalitet. CHA-S624 er en cd-skifter til 6 cd’er med høj ydeevne med en ny M DAC, Ai-NET-kompatibilitet, Optical Digital Output,
titelhukommelse til 150 cd’er og cd-tekst. CHA-1214 Ai-NET-modellen kan tage 12 cd’er, og CHM-S620 M-Bus-modellen er en superkompakt cd-skifter til 6 cd’er.
ENGLISH
Contents
Operating Instructions
WARNING
WARNING .................................................. 2
CAUTION ................................................... 2
PRECAUTIONS ......................................... 2
Basic Operation
Detaching the Front Panel .................................. 4
Attaching the Front Panel .................................. 4
Initial System Start-Up ...................................... 4
Turning Power On and Off ................................ 4
Display Angle Adjustment ................................. 5
Adjusting Volume/Balance(Between Left and
Right)/Fader (Between Front and Rear) ......... 5
Turning Loudness On/Off .................................. 5
Defeat ................................................................. 5
Switching the Phase of the Subwoofer Output .. 5
Setting the Bass Control .................................... 6
Setting the Treble Control .................................. 6
Automatic Position Display ............................... 6
Radio Operation
Switching the Tuner Mode ................................. 7
Manual Tuning ................................................... 7
Automatic Seek Tuning ..................................... 7
Manual Storing of Station Presets ..................... 8
Automatic Memory of Station Presets ............... 8
Tuning to Preset Stations ................................... 8
RDS Operation
Setting RDS Reception Mode and Receiving
RDS Stations .................................................. 9
Recalling Preset RDS Stations ........................... 9
Receiving RDS Regional (Local) Stations ........ 9
PI SEEK Setting ............................................... 10
Receiving Traffic Information .......................... 10
PTY (Programme Type) Tuning ...................... 10
Receiving Traffic Information While Playing
CD or Radio .................................................. 11
Priority PTY (Programme Type) ...................... 11
Displaying Radio Text ..................................... 11
CD Player Operation
Opening and Closing the Movable Display ..... 12
Playback ........................................................... 12
Music Sensor (Skip) ......................................... 13
Fast Forward and Backward ............................ 13
Repeat Play ...................................................... 13
M.I.X. (Random Play) ..................................... 13
Scanning Programmes ..................................... 13
Displaying the Title/Text .................................. 14
Titling Discs ..................................................... 14
Controlling CD Changer (Optional) ................ 15
Multi-Changer Selection .................................. 15
SETUP Operation
Changing Blacklighting Colour ....................... 16
Sound (Beep) Guide Function ......................... 16
Displaying Time ............................................... 16
Setting Time ..................................................... 16
Setting the Clock Auto Adjustment ................. 17
Subwoofer On and Off ..................................... 17
CD Text Scroll Setting ..................................... 17
Interrupt Feature (MIX LEVEL) ..................... 18
Auto Volume Setting ........................................ 18
Setting the AUX Mode (V-Link) ...................... 18
Turning Mute Mode On/Off ............................. 19
Adjusting Source Signal Level ........................ 19
Demonstration .................................................. 19
Remote Control Operation
Operation on Remote Control (Optional) ........ 20
Information
In Case of Difficulty ........................................ 21
Specifications ................................................... 23
Installation and Connections
Warning ............................................................ 24
Caution ............................................................. 24
Precautions ....................................................... 24
Installation ....................................................... 25
Connection ....................................................... 27
1-EN
WARNING
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR
VEHICLE.
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
PRECAUTIONS
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
Temperature
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Moisture Condensation
Doing so may result in an accident, fire or electric shock.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Damaged Disc
Use for other than its designed application may result in fire,
electric shock or other injury.
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.
DO NOT DISASSEMBLE OR ALTER.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS
IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Installation Location
Make sure the INA-N033R will not be installed in a location
subjected to:
•
•
•
•
Handling the Detachable Front Panel
•
•
2-EN
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Do not expose to rain or water.
Do not drop or apply shock.
Never Attempt the Following
Correct Handling
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.
Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Your player will automatically eject any disc that is inserted
incorrectly. If the player continues to eject a correctly inserted
disc, push the RESET switch with a pointed object such as a
ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
New Discs
As a protective measure to prevent the CD from jamming, the CD
player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player
and ejected after initial loading, using your finger, feel around the
inside of the centre hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub the inside edge of
the hole and outside edge of the disc with a ballpoint pen or other
such instrument, then insert the disc again.
Centre
Hole
Centre
Hole
New
Disc
Bumps
Outside
(Bumps)
CORRECT
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause
the CD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the centre of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the disc to
be out of standard specifications and may create operational
problems. We recommend not using these accessories on discs
played in Alpine CD players.
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Transparent Sheet
Disc Stabilizer
Use only Alpine's exclusive Navigation Disc (not supplied)
with this unit. You cannot use any other navigation discs.
You also cannot play DVD/VIDEO CDs on this unit.
For operation of the navigation system, see the owner’s
manual for the navigation disc.
3-EN
Basic Operation
• Controllable with Remote Control
Remote control sensor
POWER
bass engine/
DEFEAT
OK
MODE/LOUD
Flipper switch
ANGLE 89
RESET
Detaching the Front Panel
1
2
3
Press and hold the POWER button at least 2 seconds
to turn off the power.
Press the
(Release) button at left side until the
front panel pops out.
Grasp the left side of the front panel and pull it out.
• Compatibility with Factory Steering Wheel Radio
Controls
If your vehicle has steering wheel controls for the radio,
an optional steering wheel control interface may be
available to connect your Alpine radio. For details,
contact your Alpine dealer.
Initial System Start-Up
Immediately after installing or applying power to the unit, it
should be initialized. Press the RESET switch with a
ballpoint pen or any other pointed object.
Turning Power On and Off
NOTES
• The front panel may become hot in normal usage (especially
the connector terminals on the back of the front panel), this is
not malfunction.
• To protect the front panel, place it in the supplied carrying
case.
1
Press the POWER button to turn on the unit.
NOTE
The unit can be turned on by pressing any other button except
the eject c button and ANGLE 89 button.
The volume level gradually increases to the previous level
you were listening to before the unit was turned off. Press
and hold the POWER button for at least 2 seconds to turn
off the unit.
NOTE
Attaching the Front Panel
1
2
First, insert the right side of the front panel into the
main unit. Align the groove on the front panel with the
projections on the main unit.
Push the left side of the front panel until it locks firmly
into the main unit.
2
1
1
NOTE
Before attaching the front panel, make sure that there is no dirt
or dust on the connector terminals and no foreign object
between the front panel and the main unit.
4-EN
The very first time the power is turned on, the volume will start
from level 0.
Display Angle Adjustment
Movable display
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency
emphasis at low listening levels. This compensates for
the ear's decreased sensitivity to bass and treble sound.
1
The movable display may be adjusted to 3 different
angles depending upon user preference.
1
Press the ANGLE 89 button to adjust the angle of the
movable display.
NOTES
• The display will close a half minute after the ignition key is
turned to the OFF position.
• The adjusted angle of the display is stored in memory. There
is no need to re-adjust the angle when the power is turned
back on.
Defeat
By setting Defeat ON, all previously adjusted in the bass
engine mode and LOUD settings will return to the
factory defaults.
1
Adjusting Volume/Balance (Between
Left and Right)/Fader (Between Front
and Rear)
1
Press the MODE (Audio Control) knob repeatedly to
choose the desired mode.
Each press changes the modes as follows:
→ BAL.
→ FAD.
→ Vol.
NOTES
• If the MODE (Audio Control) knob is not rotated within 5
seconds after selecting the BALANCE, or FADER mode, the
unit automatically returns to the VOLUME mode.
• When the subwoofer is ON, respective levels may be adjusted.
2
Press the DEFEAT button for more than 2 seconds to
turn Defeat on.
To cancel Defeat, press the DEFEAT button again for
more than 2 seconds.
CAUTION
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Press and hold the LOUD button for at least 2 seconds
to activate or deactivate the loudness mode.
The display shows "LOUD" when the loudness mode is
activated.
Switching the Phase of the
Subwoofer Output
You can switch the phase of the subwoofer output to
NORMAL 0° or REVERSE 180°. To select the desired
phase.
1
2
3
4
Press the bass engine button to change to the bass
engine mode.
Move the Flipper switch up or down to select SUB.W.
Press the OK button or MODE knob to set the SUB.W.
mode.
Press the OK button or MODE knob to change to the
SUB.W. PHASE setting display.
Rotate the MODE (Audio Control) knob until the
desired sound is obtained in each mode.
Move the Flipper switch up or down to select 0°
(NORMAL) or 180° (REVERSE). Press the OK button
or MODE knob to set.
NOTE
NOTES
When the temperature inside the unit rises, the volume may
decrease momentarily. This is not a malfunction.
• If no button is pressed within 10 seconds, the Phase of the
Subwoofer Output setting will be turned off automatically.
• After 10 seconds from the completion of operation, the system
returns to the normal mode automatically. If the RTN button
is pressed, the display returns to the previous setting
indication.
5-EN
Basic Operation
Setting the Treble Control
A/N DISP
OK
MODE
Flipper switch
You can change the Treble Frequency emphasis to
create your own tonal preference.
1
2
bass engine
Press the bass engine button to change to the bass
engine mode.
Move the Flipper switch up or down to select TREBLE
CONT. Press the OK button or MODE knob to set the
TREBLE CONT. (Treble Center frequency control)
mode.
3-1 Setting the treble Level:
Move the Flipper switch up or down to select TREBLE
LEVEL. Press the OK button to set.
Move the Flipper switch up or down to select the
desired Treble level (–7~+7). Press the OK button or
MODE knob to set.
You can emphasize the treble frequency.
Setting the Bass Control
You can change the Bass Frequency emphasis to create
your own tonal preference.
1
2
Press the bass engine button to change to the bass
engine mode.
3-2 Setting the treble Centre frequency:
Move the Flipper switch up or down to select TREBLE
FREQ. Press the OK button to set.
Move the Flipper switch up or down to select the
desired treble centre frequency (10.0kHz ~ 17.5kHz).
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select BASS
CONT. Press the OK button or MODE knob to set the
BASS CONT. (Bass Center frequency control) mode.
3-1 Setting the bass Level:
Emphasizes the displayed Treble frequency ranges.
Move the Flipper switch up or down to select BASS
LEVEL. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired bass level (–7~+7). Press the OK button or
Mode knob to set.
You can emphasize or weaken the bass frequency.
3-2 Setting the bass Centre frequency:
Move the Flipper switch up or down to select BASS
FREQ. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
•
desired bass centre frequency (60Hz ~ 180Hz). Press
the OK button or MODE knob to set.
NOTES
• If no buttons are pressed within 10 seconds, the Treble control
setting will be turned off automatically.
• After 10 seconds from the operation is completed, the system
returns to the normal mode automatically. By pressing the
RTN button, the display returns to the previous setting
indication.
Automatic Position Display
1
Press the A/N DISP button to change the display.
Automatic position (present position) and the GPS
receiving sensitivity are displayed.
Emphasizes the displayed Bass frequency ranges.
Example of vehicle’s present position
3-3 Setting the bass Band Width (Q-Factor):
Move the Flipper switch up or down to select BAND
WIDTH. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select the
desired bass Band Width (WIDE1 (Wide) ~ WIDE4
(Narrow)). Press the OK button or MODE knob to set.
Changes the bass boost band width to narrow or wide. A
wide setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
NOTES
• If no buttons are pressed within 10 seconds, the Bass control
setting will be turned off automatically.
• After 10 seconds from the completion of operation, the system
returns to the normal mode automatically. By pressing the
RTN button, the display returns to the previous indication.
6-EN
The GPS receiving sensitivity and the
number of satellites are displayed.
NOTES
• To display the present position of your vehicle, connect the
GPS antenna to the unit. (refer to “Installing the GPS
Antenna” on page 26.).
• When inserting the separately sold navigation disk (NVDT001) specialized for this unit, navigating operations from the
unit become available. MENU and VOICE button are used for
navigating operations.
You cannot use the info button at present. It will be used for
functions to be added in the future (e.g. traffic information
reception, etc.). (Except some areas.)
Radio Operation
Manual Tuning
TUNE
BAND
SOURCE
OK
MODE
Flipper switch
1
2
Press the SOURCE button until a radio frequency
appears in the display.
Press the BAND button repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM-1 → FM-2 → FM-3 → MW → LW
g DN
f UP
SETUP
3
Press the TUNE button repeatedly until "DX SEEK"
and "SEEK" disappear from the display.
NOTE
Switching the Tuner Mode
The initial mode is DX SEEK.
4
The INA-N033R incorporates the MAX TUNE Pro for the
highest quality tuner audio. Moreover, you can choose
between two settings to suit your own personal sound
preferences usage.
1
2
3
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select FM
CONDITION. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select your
preference. Press the OK button or MODE knob to set.
The display returns to the SETUP screen.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
NOTE
The STEREO indicator appears on the display when a Stereo
FM station is tuned in.
Automatic Seek Tuning
1
2
Press the SOURCE button until a radio frequency
appears in the display.
Press the BAND button repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM-1 → FM-2 → FM-3 → MW → LW
3
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to the tuner
in the HI-FI mode, we recommend you change to the
NORMAL mode.
4
Press the g DN or f UP button to move
downward or upward one step respectively until the
desired station frequency is displayed.
When the setting is completed, press the SETUP
button to return to the normal mode.
4
Press the TUNE button to illuminate the DX and SEEK
indicators in the display.
With the DX (Distance) mode activated, both strong
and weak stations will be tuned in the Auto-Seek
operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will be
tuned.
Press the g DN or f UP button to automatically
seek for a station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next station.
7-EN
Radio Operation
Automatic Memory of Station Presets
SOURCE A.ME
BAND
1
2
3
Preset buttons (1 through 6)
Manual Storing of Station Presets
1
2
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM-1, FM-2, FM-3,
MW and LW).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
8-EN
Press the BAND button repeatedly until the desired
radio band is displayed.
Press and hold the A. ME button for at least 2 seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons
Preset 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold the Preset button (1 through 6) that
you want to store the station on for at least 2 seconds.
The selected station is stored.
Press the SOURCE button to select the radio mode.
Tuning to Preset Stations
1
2
3
Press the SOURCE button to select the radio mode.
Press the BAND button repeatedly until the desired
band is displayed.
Press the station Preset button that has your desired
radio station in memory.
The display shows the band, preset number and
frequency of the station selected.
RDS Operation
Recalling Preset RDS Stations
SOURCE
OK
MODE
Flipper switch
1
2
3
g DN
f UP
F/SETUP
AF
Preset buttons
(1 through 6)
Setting RDS Reception Mode and
Receiving RDS Stations
4
5
The RDS (Radio Data System) is a radio information
system using the 57 kHz subcarrier of regular FM
broadcast. The RDS allows you to receive a variety of
information such as traffic information, station names,
and to automatically re-tune to a stronger transmitter
that is broadcasting the same programme.
1
2
3
4
5
6
Press the "F" button. The "FUNC" indicator will
illuminate.
Press the AF button to activate the RDS mode.
The display shows "AF" when the RDS mode is
activated.
Press the "F" button to activate the normal mode. The
"FUNC" indicator will turn off.
Press the 1 through 6 buttons in which your desired
RDS station is preset. If the preset station's signal is
weak, the unit automatically searches and tunes to a
stronger station in the AF (Alternative Frequencies) list.
If the preset station and the stations in the AF list
cannot be received:
When the PI SEEK setting is on (refer to "PI SEEK
Setting" on page 10), the unit searches again for a
station in the PI (Programme Identification) list.
If the signal level of the Regional (Local) station being
tuned becomes too weak to receive, press the same
preset button to tune in a Regional station in other
district.
Press the SOURCE button until a radio frequency
appears in the display.
NOTE
For presetting the RDS stations, refer to the Radio Operation
section. The RDS stations can be preset in the FM-1, FM-2 and
FM-3 bands only.
Press the "F" button. The "FUNC" indicator will
illuminate.
Press the AF button to activate the automatic tuning
mode.
Receiving RDS Regional (Local)
Stations
Press the g DN or f UP button to tune in the
desired RDS station.
1
Press the AF button to deactivate the automatic tuning
mode.
2
Press the "F" button to activate the normal mode. The
"FUNC" indicator will turn off.
3
Tips
• When the unit receives the PTY31 (Emergency Broadcast)
signal, the unit will show "ALARM" in the display
automatically.
• The RDS digital data includes the followings:
PI
PS
AF
TP
TA
PTY
EON
R.TEXT
Programme Identification
Programme Service Name
List of Alternative Frequencies
Traffic Programme
Traffic Announcement
Programme Type
Enhanced Other Networks
Radio Text Information
4
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select
REGIONAL. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
In the "REGIONAL OFF" mode, the unit automatically
keeps receiving the related local RDS station.
Press the SETUP button to deactivate the setting
mode.
9-EN
RDS Operation
PTY (Programme Type) Tuning
g DN
OK
MODE
Flipper switch
1
2
Press the "F" button. The "FUNC" indicator will
illuminate.
Press the PTY button to activate the PTY mode. The
Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, "NO PTY" will
be displayed for 5 seconds.
f UP
T.INFO
F/SETUP
P.PTY
PTY
PI SEEK Setting
1
2
3
4
2
If no buttons are pressed within 5 seconds after pressing the PTY
button, the PTY mode will be automatically cancelled.
3
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
4
Press the SETUP button again to return to normal
operation.
Press the T.INFO button to activate the Traffic
Information mode.
To cancel the Traffic information mode, press the
T.INFO button again.
Press the g DN or f UP button to select your
desired traffic information station. When a traffic
information station is tuned in, the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "T.INFO".
When traffic information broadcast is over, the unit will
automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode for 1
minute. If the signal remains below a certain level for over 1
minute, the "T.INFO" indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press the T.INFO button to skip that traffic
information message. The T.INFO mode will remain in the
ON position to receive the next traffic information message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP stations.
10-EN
Press the g DN and f UP buttons within 5
seconds after activating the PTY mode to choose the
desired programme type while the PTY (programme
type) is being displayed. Each press scrolls the
programme type by one.
→ Light M ↔ Classics ↔ Other M ←
Move the Flipper switch up or down to select PI
SEEK. Press the OK button or MODE knob to set.
Receiving Traffic Information
1
NOTE
R.TEXT
Press the PTY button within 5 seconds after selecting
the programme type to start searching for a station in
the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
If no station is found, "NO PTY" will be displayed for 2
seconds.
5
Press the "F" button to activate the normal mode. The
"FUNC" indicator will turn off.
NOTES
• Operate the unit while the "FUNC" indicator is illuminated.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator will turn off.
• When the Navigation disc (sold separately) is inserted and the
system is set in navigation mode, the selected language can be
used with the PTY (Programme Type) or P.PTY (Priority
Programme Type) language.
Receiving Traffic Information While
Playing CD or Radio
1
2
Press the T.INFO button repeatedly until the T.INFO
indicator appears in the display.
3
4
Press the g DN and f UP buttons to select a
traffic information station if necessary.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional
alternative frequencies to the AF list. The EON indicator
appears while an RDS EON station is being received. If the
station being received does not broadcast the traffic information,
the receiver automatically tunes in the related station that
broadcasts the traffic information when it occurs.
3
NOTE
In the PRIORITY PTY function, unlike in the T.INFO function,
the volume does not increase during operation.
5
Operate the unit while the "FUNC" indicator is illuminated.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator will turn off.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
2
3
NOTE
Priority PTY (Programme Type)
This function allows presetting of a programme type
such as music category, news, etc. You can listen to a
programme in the preset programme type as the unit
automatically gives priority to the preset programme
type when it begins broadcasting, and interrupts the
programme you are currently listening. This feature is
functional when your unit is set to a mode other than the
LW and MW.
1
2
Press the "F" button. The "FUNC" indicator will
illuminate.
Press the P. PTY button to activate the PRIORITY PTY
mode.
"P. PTY" is displayed and then the programme type for
3 seconds. The initial setting is "News."
Press the "F" button to activate the normal mode. The
"FUNC" indicator will turn off.
NOTE
Press the T.INFO button to deactivate the Traffic
Information mode. The T.INFO indicator disappears.
The unit automatically switches to a traffic information
announcement even if you are listening to a source other than
the radio or CD.
Press the P. PTY button to activate the PRIORITY PTY
mode again.
• To change the programme category, perform the
step 3.
• To disable the PRIORITY PTY function, press and
hold the P. PTY button for at least 2 seconds.
• When a traffic information broadcast starts, the unit
automatically mutes the CD player or the regular FM
broadcast.
• When the traffic information broadcast finishes, the
unit automatically returns to the original source play
before the traffic information broadcast began.
• When traffic information stations cannot be
received:
In the tuner mode:
When the TP signal can no longer be received for
over 1 minute, the "T.INFO" indicator blinks.
In the CD mode:
When the TP signal can no longer be received,
the traffic information station of another frequency
will be selected automatically.
Press the g DN or f UP button within 5 seconds
while "News" is being displayed to choose a desired
programme type. Then press P. PTY button. The
PRIORITY PTY function will activate.
4
5
Tune in a radio station that transmits text messages.
Press the "F" button. The "FUNC" indicator illuminates.
Press the R.TEXT button to activate the Radio Text
mode. When the "CD Text Scroll Setting" is set to
"AUTO SCROLL ON" (refer to page 17), the display
scrolls. When set to "AUTO SCROLL OFF," the
scrolling is cancelled. It continues until other operation
is performed.
To cancel the Radio Text mode, press the R.TEXT
button.
Press the "F" button to return to the normal operation
mode. The "FUNC" indicator disappears from the
display.
NOTES
• If there is no receivable text message or the unit cannot
receive a text message properly, the display shows "NO
TEXT".
• Operate the unit while the "FUNC" indicator is illuminated.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator will turn off.
• Depending on the signal reception conditions, “R/T WAIT”
may be displayed.
• When the CD Text Scroll Setting (refer to page 17) is set to
"AUTO SCROLL OFF", press and hold the TITLE button for
at least 2 seconds to scroll the Radio Text information only
once.
NOTE
If no buttons are pressed within 5 seconds after pressing the P. PTY
button, the PRIORITY PTY mode is automatically cancelled.
11-EN
CD Player Operation
2
-/J
SOURCE
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically. The
movable display will close and playback will begin.
When a disc is already inserted, press the SOURCE
button to switch to the CD mode.
The mode will change every time the button is pressed.
→ TUNER
→ CD
→ CD CHANGER∗
(∗ Only when the CD changer is connected)
3
g DN
f UP
F
M.I.X.
REPEAT SCAN
c
4
To pause playback, press the -/J button.
Pressing the -/J button again will resume playback.
To eject the disc, press the c button.
NOTES
Opening and Closing the Movable
Display
1
• If the CD does not eject, press c button again for at least 2
seconds with the movable display open.
• In CD mode, if the navigation disc (sold separately) is loaded,
“NAV. DISC” is displayed.
Press the c button.
The movable display will open.
About the usable discs.
(Movable display fully opened)
We recommend using only compact discs containing the
marks shown below.
You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) for audio use on this unit. You can not also
play CD-Rs/CD-RWs containing MP3 formatted audio
files.
To close the movable display, press the c button
again.
The movable display will close.
NOTES
• Do not apply shock to the movable display when it is open as
it may result in malfunction of the unit.
• The display will stop at the set angle when closing.
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to
extreme temperatures or sunlight (e.g., left in the car
or this unit), CDs recorded under unstable conditions,
CDs on which a recording failed a re-recording was
attempted.
CAUTION
Keep hands (or any other object) away from the display while it
is opening or closing to avoid damage or injury. The back of the
movable display will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
Playback
1
Press the c button.
The movable display will open.
Insert a disc with the label side facing up.
12-EN
On handling Compact Discs (CD/CD-R/
CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels and do not write on the
surface.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around the disc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long
time. Never expose the disc to direct sunlight. Heat
and humidity may damage the CD and you may not be
able to play it again.
Music Sensor (Skip)
M.I.X. (Random Play)
1
1
Momentarily press the g DN button once during CD
play to return to the beginning of the current track. If
you wish to access the beginning of a track further
back, repeatedly press until you reach the desired
track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access the
beginning of a track further ahead, press repeatedly
until the desired track is reached.
To cancel M.I.X. play, press the M.I.X. button again to
turn off the M.I.X.
NOTES
• If a CD Changer equipped with the ALL M.I.X. function is
connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback sequence.
NOTE
The music sensor feature is functional in the play or pause mode.
Fast Forward and Backward
1
→ M.I.X.→ ALL M.I.X. → (off)
• In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the "F" button twice to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
Press and hold the g DN or f UP button to
quickly move backward or forward until you reach the
desired section of the track.
Repeat Play
1
Press the REPEAT button to play back repeatedly the
track being played.
The REPEAT indicator appears and the track will be
played repeatedly.
Press the REPEAT button again and select OFF to
deactivate the repeat play.
NOTES
• If a CD Changer is connected and the REPEAT ALL mode is
selected, the unit repeatedly plays back all tracks on the disc
selected.
→ REPEAT
→ REPEAT ALL
→ (off)
• In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the "F" button twice to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
Press the M.I.X. button in the play or pause mode.
The M.I.X. indicator will illuminate and the tracks on the
disc will be played back in a random sequence. After all
the tracks on the disc have been played back once, the
player will begin a new random sequence play until the
M.I.X. mode is cancelled.
Scanning Programmes
1
Press the SCAN button to activate the Scan mode.
The first 10 seconds of each track will be played back
in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
• In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the "F" button twice to illuminate the
"FUNC" indicator and go to step 1 within 5 seconds.
13-EN
CD Player Operation
Titling Discs
1
BAND
OK
SOURCE
MODE
Flipper switch
2
3
TITLE
Disc Select buttons
(1 through 6)
Displaying the Title/Text
It is possible to display the CD title if the title has been
previously inputted. For details, see Titling Discs (see
this page). Text information, such as the disc name and
the track name, will be displayed if playing a CD text
compatible disc.
1
4
Press the TITLE button and select the title display
mode.
For details, see Displaying the Title/Text (see this
page).
Press the TITLE button for at least 2 seconds to
change to the Title Input mode.
Letter symbols appear on the display. Move the Flipper
switch up or down within 10 seconds to transfer the
cursor to the letter symbol you want to input. Press the
OK button or MODE knob to set the letter.
Repeat the Procedure 3. Up to 8 digits can be input.
The input title is memorized automatically and
displayed as title.
When inputting less than 8 digits, select OK in the
letter symbols shown on the display. The letters will be
memorized automatically and displayed as title. Even if
OK is not selected, the letters will be memorized
automatically after 10 seconds.
NOTES
Press the TITLE button.
The mode will change every time the button is pressed.
About "Title" and "Text"
Title: With this device, it is possible to input the CD name
(see this page). This inputted name is referred to as
a "title."
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as "text."
CD/Changer mode:
↓
TEXT DISPLAY (DISC NAME)∗1
↓
TEXT DISPLAY (TRACK NAME)∗1
↓
TITLE DISPLAY∗2
∗1
∗2
Displayed during playback of a disc with CD Text.
Nothing will be displayed when the CD contains no
text data.
Nothing will be displayed when the title has not
been inputted.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The display may not show all the information of the CD Text
depending on the CD changer.
• When the CD Text Scroll Setting (refer to page 17) is set to
"AUTO SCROLL OFF", press and hold the TITLE button for
at least 2 seconds to scroll the Text information only once
(TEXT DISPLAY mode only.)
14-EN
• In step 3 and 4, if you do not operate for at least 10 seconds,
the Title Inputting mode will be canceled.
• You can also cancel the Title Inputting mode by pressing the
RTN button.
• You cannot give titles to songs.
• The memory capacity for the disc titles is 18. If you try to
store beyond the limit, the display will show "FULL DATA."
At this point, no more titles can be stored.
• To input a new title, one of the previously inputted titles must
first be deleted.
• When you want to erase a title, enter the "
" symbol into
all spaces.
• When you select
or
, the cursor indicating the input
title moves right or left.
• When selecting
, you can insert the space.
• When you select 1 or 2 , the character/symbol pattern
display changes alternately.
• The CD Changer title length or memory capacity varies
depending upon the model being used.
• Removing power from the unit may delete these titles. Use
caution when manipulating the power cord.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be
connected to the INA-N033R if it is Ai-NET compatible.
With a CD Changer connected to the Ai-NET input of
the INA-N033R, the CD Changer will be controllable
from the INA-N033R.
Using the KCA-400C (the Multi-Changer Switching
device) or KCA-410C (Versatile Link Terminal) multiple
changers can be controlled by the INA-N033R.
See the Multi-Changer Selection section on this page for
selecting the CD Changers.
Multi-Changer Selection
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers, the
KCA-400C (Multi-Changer Switching device) must be
used. If you use 1 Switching device, you can connect up
to 4 CD Changers. If you use 2 Switching devices, you
can connect up to 6 CD Changers. When using KCA410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).
1
NOTES
• The controls on the INA-N033R for CD Changer operation are
operative only when a CD Changer is connected.
• The DVD changer (optional) is controllable from the INAN033R as well as the CD changer.
1
2
Alternatively, press the SOURCE button on the Remote
Control (optional) to activate the CD Changer mode.
Proceed to Step 3 below to select the desired CD
Changer.
Press the SOURCE button to activate the CHANGER
mode. The display shows the disc number and track
number.
2
NOTE
3
The source indicator varies depending on the connected source.
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer. The selected disc number appears in the
display and CD playback starts.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is
the same as for the 6-disc CD Changer. To select discs
numbered from 7 to 12, first press the "F" button. This
changes the "D" indicator to "d". Then press the
desired Preset button. With the "F" button activated, the
Preset buttons 1 to 6 will represent discs 7 to 12
respectively.
Press the BAND button on the Remote Control
(optional) to activate the CD Changer Selection mode.
The CD Changer Selection mode remains active for 3
seconds after Step 2 is performed. Press the BAND
button until the desired CD Changer indicator appears
on the display.
NOTE
If the selected CD Changer is not connected, the display will
show "NO CHANGER."
NOTES
• After selecting the desired disc, you can operate in the same
way as for the CD player.
For details, please see the CD Operation section.
• If the "FUNC" indicator is illuminated the Disc Select buttons
become nonfunctional.
Press the SOURCE button to activate the CD Changer
mode.
Alternatively press the BAND button on the Remote
Control until the desired changer indicator appears on
the display.
4
To operate the selected changer, see "CD Player
Operation" section.
NOTE
For further details about the external input (AUX) when using
KCA-410C, see "Setting the AUX Mode (V-Link)" on page 18.
15-EN
SETUP Operation
Displaying Time
OK
MODE
Flipper switch
1
2
3
RTN
SETUP
4
Changing Backlighting Colour
1
2
3
1
Move the Flipper switch up or down to select
ILLUMINATION. Press the OK button or MODE knob to
set.
2
3
NOTE
If you continue to press the Flipper switch to up or down, the
cursor position moves continuously.
4
4
Press the SETUP button to set the selected mode.
Sound (Beep) Guide Function
This function will give audible feedback with varying
tones depending upon the button pressed.
1
2
3
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select BEEP.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select OFF or
set your preferred volume. The volume can be set one
of the three steps: LOW, MID, and HIGH. Press the OK
button or MODE knob to set. The display returns to the
SETUP screen.
NOTES
• The initial setting at the factory is BEEP OFF.
• When an external audio processor is connected, the beep tone
does not function although the BEEP setting is set to on.
• The beep tone will be output from the front speakers only.
4
Press the SETUP button to set the selected mode.
16-EN
Move the Flipper switch up or down to select CLOCK
DISPLAY. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to change the
clock display ON or OFF. Press the OK button or
MODE knob to set. The display returns to the SETUP
screen.
When the setting is completed, press the SETUP
button to return to the normal mode.
Setting Time
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down and to select
GREEN or AMBER. Press the OK button or MODE
knob to set. The display returns to the SETUP screen.
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
5
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select CLOCK
ADJUST. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select HOUR.
Press the OK button or MODE knob to set. Move the
Flipper switch up or down again to set the "Hour".
After adjustment, press the RTN button to return to the
previous indication.
Move the Flipper switch up or down to select
MINUTE. Press the OK button or MODE knob to set.
Move the Flipper switch up or down again to set the
"Minute".
After adjustment, press the RTN button to return to the
previous indication.
When the setting is completed, press the SETUP
button to return to the normal mode.
Setting the Clock Auto Adjustment
If this is set to ON, the clock display calculated from the
GPS information is available.
1
2
3
4
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select AUTO
GPS CLOCK. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
CD Text Scroll Setting
This CD player has the ability to scroll the disc and track
name recorded on CD-Text discs. The scrolling feature
will work with names greater than 20 characters.
1
2
3
When the setting is completed, press the SETUP
button to return to the normal mode.
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select AUTO
SCROLL. Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
• ON: the display of CD text is scrolled continuously.
• OFF: the display is scrolled only when a disc is
loaded or when a track is changed.
NOTE
Only minute and second are adjusted automatically.
4
Subwoofer On and Off
1
2
3
4
5
NOTES
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
• Initial mode is "AUTO SCROLL OFF".
• The unit scrolls only CD text names. The disc titles input
manually (refer to page 14) cannot be scrolled.
Move the Flipper switch up or down to select
SUBWOOFER. Press the OK button or MODE knob to
set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
Press the SETUP button after setting the SUBWOOFER
ON.
Press the MODE (Audio Control) knob repeatedly to
select the SUBWOOFER mode.
→ S.W.
Vol. ←
6
When the setting is completed, press the SETUP
button to return to the normal mode.
→ BAL.
FAD. ←
Rotate MODE (Audio Control) knob until the desired
sound is obtained in each mode.
17-EN
SETUP Operation
3
SOURCE
OK
MODE
Flipper switch
4
Move the Flipper switch up or down to select your
preferred Volume pattern (VOL 1: small compensation
to VOL 6: large compensation). Press the OK button or
MODE knob to set. The display returns to the SETUP
screen.
When the setting is completed, press the SETUP
button to return to the normal mode.
Setting the AUX Mode (V-Link)
SETUP
Interrupt Feature (MIX LEVEL)
When the voice guidance of the navigation system
starts, the volume level of any currently playing audio
source is reduced automatically.
You can also adjust the volume level of voice guidance.
1
2
3
4
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) or Versatile
Link Terminal (KCA-410C) to this component.
1
2
3
Move the Flipper switch up or down to select MIX
LEVEL. Press the OK button or MODE knob to set.
NOTES
• When the voice guidance of the Navigation system starts to
interrupt the audio the display is automatically changed to the
navigation screen.
• The volume level of the audio will be automatically reduced
when the voice guidance of the Navigation system starts.
• The voice guidance will be output from the front speakers
only.
• When connecting the external audio processor to the unit,
ensure the output of the voice guidance by connecting the
external speaker (KAX-551N).
1
2
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select AUTO
VOLUME. Press the OK button or MODE knob to set.
18-EN
Move the Flipper switch up or down to select your
preferred auxiliary mode.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
ON:
You can select an external input sound source. You can
also select an AUX NAME for external input∗.
∗ 1. Move the Flipper switch up or down to select the
AUX NAME on the SETUP display. Press the OK
button or MODE knob to set.
2. Move the Flipper switch up or down to select your
preferred name from AUX, GAME, VCR, TV and
MP3. Press the OK button or MODE knob to set.
When the setting is completed, press the SETUP
button to return to the normal mode.
This is a function that changes the Volume, Bass value
according to the car speed pulse for the compensation
of hearing by noise. The desirable compensation
amount can be selected from 6 patterns.
Move the Flipper switch up or down to select
AUXILIARY INPUT. Press the OK button or MODE
knob to set.
OFF:
You cannot select an external input sound source.
Move the Flipper switch up or down to adjust the
volume LEVEL of NAVI Interrupt at your preference.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
Auto Volume Setting
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
AUXILIARY LABEL
You can select and set a name of external input when
Versatile Link Terminal (KCA-410C) is not connected.
AUX-1 NAME / AUX-2 NAME
You can select an AUX NAME when Versatile Link
Terminal (KCA-410C) is connected.
NOTE
When connecting the Versatile Link Terminal (KCA-410C), you
can set two AUX mode displays.
4
5
When the setting is completed, press the SETUP
button to return to the normal mode.
To adjust the volume, etc., first press the SOURCE
button and select the AUX mode, then make the
necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you can
connect two external inputs. To select the mode, press the BAND
button on the unit.
Turning Mute Mode On/Off
If a device having the interrupt feature is connected,
audio will be automatically muted whenever the interrupt
signal is received from the device. This function can be
turned ON or OFF from the head unit by following
procedure below.
1
2
3
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select MUTE.
Press the OK button or MODE knob to set.
This unit has the Demonstration feature which simulates
the display functions on the display panel.
1
2
3
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select DEMO.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
If no buttons are pressed 30 seconds after the DEMO
mode is turned ON. The DEMO mode then begins.
NOTE
The initial setting at the factory is "DEMO OFF".
The initial setting at the factory is "MUTE ON."
4
Demonstration
Press the SETUP button again to return to normal
operation.
NOTE
4
Press the SETUP button again to return to normal
operation.
NOTE
When Mute is set to OFF, if an external interruption (e.g.,
vehicle phone) happens, the display shows “INT.”.
When Mute is set to ON, the display shows “MUTE”.
Adjusting Source Signal Level
If the difference in volume level between the CD player
and FM radio is too great, adjust the FM signal level as
follows.
1
2
3
4
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
Move the Flipper switch up or down to select FM
LEVEL.
Press the OK button or MODE knob to set.
Move the Flipper switch up or down to select HIGH or
LOW. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
Press the SETUP button to activate the normal mode.
19-EN
Remote Control Operation
Operation on Remote Control (Optional)
You can operate it with the optional remote control (RUE-4135). Change the AUDIO/NAV. Switch, on the side of the remote
control, to AUDIO.
S
VO
L.
E
RC
OU
1
2
ENTER
/
%
MENU
&
4
3
M
A.PROC.
5
E
UT
LO.PT.
ROUTE
1
7
1
:/J
2
3
4
VOL.
A.PROC.∗∗
SOURCE
5
MUTE
6
BAND
7
8
9
!
"
#
$
%
&
FUNC.
OP/CL
9
8
ON/OFF
V.SEL.
Numeric Keypad
AUDIO/NAV.
MODE
5
6
7
DEST.
BS
8
$
9
OP/C
TEL. 0
L
Button
No.
3 VOI
FUN
C
ON/OFF
"
6
CE
POS. 2
.
8
9
4
BAN
D
i
RETURN
M. PT.
OK
!
DEL.DEST.
V. SEL.
#
Description
Push : PLAY/PAUSE
Radio mode: Preset Selection (C/B), SEEK UP/DOWN (@/A)
CD/Changer mode:
Disc Selection (C/B), Music Sensor (@/A), BW/FF (@/A Hold)
Volume Control
Press the button to call the external audio processor mode.∗
Press to select the audio source.
Press the button to lower the volume by 20 dB instantly. Press the
button again to cancel.
Radio mode: Radio Band Selection
CD/Changer mode: Changes Disc Mode
−
−
Display Angle DOWN (only pressing MODE button)
Display Angle UP (only pressing MODE button)
Press the button to turn the power on/off.
−
−
Switching AUDIO/NAV.
Operates 9 to ! (Flashes the Status Indicator for 5 seconds.)
∗ For the operation of external audio processor, refer to the Owner's Manual of the external audio processor you purchased.
∗∗ This button is used in conjunction with an optional Ai-NET processor.
20-EN
Information
In Case of Difficulty
If you encounter a problem, please review the items in
the following checklist. This guide will help you isolate
the problem if the unit is at fault. Otherwise, make sure
the rest of your system is properly connected or consult
your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle's ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with
the proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace
the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
CD
CD Player/Changer not functioning.
• Out of operating temperature range +50˚C (+120˚F) for CD.
- Allow the vehicle's interior (or trunk) temperature to cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about
1 hour).
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
CD playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press the c button. After the error indication disappears,
insert the disc again. If the above-mentioned solution does
not solve the problem, consult your nearest ALPINE dealer.
21-EN
Information
Indication for CD Player
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
NO DISC
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the c button.
The movable display will open.
2) Press the c button again for at least 2 seconds while the
movable display is open.
ERROR
• Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
c button again.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.
• The disc cannot be read.
- Do not insert a scratched disc or an unplayable disc such as
DVD, VIDEO CD or CD-ROM.
Indication for CD Changer
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
ERROR 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not
eject, consult your Alpine dealer.
ERROR 02
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function.
When the CD Changer finishes the eject function, insert an
empty CD magazine into the CD Changer to receive the disc
left inside the CD Changer.
NO MAGAZINE
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NOTE
When the “ERROR” is displayed:
In case that the disc cannot be ejected by pressing the c button,
press the RESET switch (refer to page 4) and press the c button
again.
If not ejecting, consult your Alpine dealer.
22-EN
NO DISC
• No indicated disc.
- Choose another disc.
Specifications
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
GENERAL
87.5 – 108.0 MHz
0.7 µV
90 dB
65 dB
35 dB
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
531 – 1,602 kHz
25.1 µV/28 dB
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
153 – 281 kHz
31.6 µV/30 dB
Power Requirement
Maximum Power Output
Maximum Pre-Output Voltage
Bass
Treble
Weight
14.4 V DC
(11–15 V allowable)
45 W × 4
2 V/10k ohms
±14 dB at 60 Hz
±14 dB at 10 kHz
2.0 kg (4 lbs. 6 oz)
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
155 mm (6-3/32")
NOSEPIECE SIZE
CD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
95 dB
85 dB (at 1 kHz)
Width
Height
Depth
170 mm (6-11/16")
46 mm (1-13/16")
24 mm (15/16")
Due to continuous product improvement, specifications and design
are subject to change without notice.
PICKUP
Wave length
Laser power
655 nm
CLASS II
NAVIGATION SECTION
Aerial Type
Reception Frequency
Reception Sensitivity
Reception Method
Micro-strip planar aerial
1575.42±1 MHz
-130 dB max.
Parallel 12 channels
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
23-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 2 and 3 of this manual thoroughly
for proper use.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Route the cables and wiring away from moving parts (like the
seat rails) or sharp or pointed edges. This will prevent crimping
and damage to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the wire’s insulation from
being cut by the metal edge of the hole.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury.
If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your INA-N033R. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for
this unit. When connecting the INA-N033R to the fuse box,
make sure the fuse for the intended circuit of the INA-N033R
has the appropriate amperage. Failure to do so may result in
damage to the unit and/or the vehicle. When in doubt, consult
your ALPINE dealer.
• The INA-N033R uses female RCA-type jacks for connection
to other units (e.g. amplifier) having RCA connectors. You
may need an adaptor to connect other units. If so, please
contact your authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables
to each other or to the vehicle body.
IMPORTANT
Please record the serial number of your unit in the space
provided below and keep it as a permanent record. The serial
number plate is located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
24-EN
NOTE
Installation
For the screw *, provide a proper screw to the chassis installing
location.
Installing the Main Unit
Metal plate
Detachable
Front panel
Caution
When you install this unit in your car, do not remove the
Detachable Front Panel.
If the Detachable Front Panel is removed during installation, you
might press too hard and warp the metal plate that holds it in place.
3
Slide the INA-N033R into the dashboard. When the
unit is in place, make sure the locking pins are fully
seated in the down position. This can be done by
pressing firmly in on the unit while pushing the locking
pin down with a small screwdriver. This ensures that
the unit is properly locked and will not accidentally
come out from the dashboard. Install the Detachable
Front Panel.
Lock pin
Caution
Do not block the unit's fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit
and may cause a fire.
Air ventilation
hole
<Rear side>
1
Rubber Cap
(Included)
Hex Bolt
(Included)
Bracket
Removal
1 Remove the detachable front panel.
2 Use a small screwdriver (or similar tool) to push the
locking pins to the "up" position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Dashboard
Mounting sleeve
(Included)
Front frame
INA-N033R
Slide mounting sleeve from main unit (see "Removal"
on this page). Slide the mounting sleeve into the
dashboard.
2
Screws (M5 × 8)
(Included)
Metal Mounting Strap
INA-N033R
Screw
∗
Bolt Stud
Hex Nut (M5)
Mounting Bracket
INA-N033R
When your vehicle has the Bracket, mount the long hex
bolt onto the rear panel of the INA-N033R and put the
Rubber Cap on the hex bolt. If your vehicle does not
have the Mounting Support, reinforce the head unit
with the metal mounting strap (not supplied). Connect
all the leads of the INA-N033R according to details
described in the CONNECTION section.
25-EN
Installation and Connections
Installing the GPS Antenna
1
Speed Sensor Lead or Parking Brake Lead
Connection
Mount the antenna on the roof.
Clean dust and oil at the mounting location and mount
the antenna.
NOTES
• The magnet of the antenna is very strong. Proceed cautiously
to prevent any damage to the vehicle’s body. Keep the magnet
away from articles susceptible to magnetic fields such as
credit cards, watches, etc.
• Do not paint the antenna. Reception sensitivity may be
decreased.
For leads which need branching to the supplied speed
sensor and parking brake, use the solderless
connectors.
1
Speed sensor auxiliary cable
or
Parking brake auxiliary cable
Antenna
(Included)
To
Speed sensor cable
or
Parking brake cable
Vehicle lead
2
Pliers
Mounting the antenna inside the vehicle.
1. Clean the mounting location.
2. Put on the antenna mounting plate.
3. Mount the antenna.
NOTES
• Mount the antenna on a flat plane of the dash board or rear
tray.
• Some thermal reflection type or thermal absorption type glass
may interrupt high frequency waves. If reception is poor with
the antenna installed inside the car, try to mount the antenna
outside the car.
Antenna
(Included)
NOTE
The main unit must be mounted within ±5 degrees of the
horizontal plane, left to right, and 30 degrees of the horizontal
plane, back to front.
Less than 30°
Antenna mounting plate
(Included)
2
Routing the antenna cable.
1. Route the cable using the provided cable clampers
to take up the cable’s slack.
2. Use the waterproof pad when running the cable
under the vehicle’s rubber gasket.
3. Attach the cable at several points using the
remaining cable clampers.
Cable clampers
(Included)
Water proof pad
26-EN
• The unit may not be able to show your present
position accurately if the angle is too big.
For best performance, be sure to mount the unit as
horizontally as possible.
Connection
Antenna
ISO Antenna Convertor Plug
ISO Antenna Plug
(Yellow/Blue) PARKING BRAKE
1
2
To the parking brake signal line
(Pink/Black)
AUDIO INTERRUPT IN
3
(Blue/White)
REMOTE TURN-ON
4
To vehicle phone
To amplifier or equalizer
(Orange) DIMMER
To the instrument cluster
illumination lead
5
(Red)
IGNITION
6
(Black)
GND
7
(Blue)
POWER ANT
8
choke
coil
!
To power antenna
"
Ignition Key
9
Battery
BATTERY (Yellow)
SPEED SENSOR
(Green/White)
#
To the vehicle speed pulse line
∗
speed sensor
auxiliary lead
CD Changer
(Ai-NET)
(Sold Separately)
$
&
Speakers
%
+
Amplifier
Front
/
.
,
Amplifier
Rear
Amplifier
Subwoofer
.
)
~
Ai-NET
(
NORM
.
EQ/DIV
:
(Green)
;
(Green/Black)
(White)
<
=
(White/Black)
>
(Gray/Black)
?
(Gray)
(Violet/Black)
@
[
(Violet)
\
Rear Left
Front Left
Speakers
Front Right
Rear Right
27-EN
Installation and Connections
1 Antenna Receptacle
Connect to the supplied ISO antenna convertor plug.
2 Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INA-N033R.
3 Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio Interface output of a cellular
phone which provides ground shorting when a call is
received.
4 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
5 Dimmer Lead (Orange)
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will enable the vehicle's
dimmer control to dim the backlighting of the unit.
6 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+) 12V
only when the ignition is turned on or in the accessory
position.
7 Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
8 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
NOTE
This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
9 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
! Fuse Holder (15A)
" ISO Power Supply Connector
# Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V - 3V)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
$ Remote Control Interface Connector
To remote control interface box.
% To RDS-TMC Receiver (Optional)
NOTE
To connect an Alpine RDS-TMC Receiver, consult your Alpine
dealer.
& GPS Antenna (Included)
( Power Supply Connector
) Ai-NET Connector
Connect this to the output or input connector of other
product (CD changer, Equalizer, etc.) equipped with AiNET.
~ System Switch
When connecting a processor using Ai-NET, place this
switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
NOTE
Be sure to turn the power off to the unit before changing the
switch position.
+ Front Output RCA Connectors
RED is right and WHITE is left.
, Rear Output RCA Connectors
RED is right and WHITE is left.
- Subwoofer Output RCA Connectors
RED is right and WHITE is left.
. RCA Extension Cable (Sold Separately)
/ Ai-NET Cable (Included with CD Changer)
: ISO Connector (Speaker Output)
; Left Rear (+) Speaker Output Lead (Green)
< Left Rear (–) Speaker Output Lead (Green/Black)
= Left Front (+) Speaker Output Lead (White)
> Left Front (–) Speaker Output Lead (White/Black)
? Right Front (–) Speaker Output Lead (Grey/Black)
@ Right Front (+) Speaker Output Lead (Grey)
[ Right Rear (–) Speaker Output Lead (Violet/Black)
\ Right Rear (+) Speaker Output Lead (Violet)
* If the connectors of the vehicle are not ISO type or they
are ISO type but not equipped with the speed sensor
terminal on the vehicle side ISO connector, use the
supplied speed sensor auxiliary cable to connect to the
speed sensor cable of the vehicle.
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
28-EN
Händlerstemple
Tips der Polizei:
[
[
[
[
[
[
Stellen Sie Ihr Fahrzeug stets gut sichtbar ab.
Verschließen Sie Türen, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit.
Lassen Sie keine Wertsachen sichtbar im Auto liegen.
Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nächste Polizeidienststelle.
Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand.
Informieren Sie sich über technische Sicherungsmöglichkeiten bei einer Kriminalpolizeilichen
Beratungsstelle.
Gerät 1
Modell-Nr.:
Hersteller:
Seriennummer:
A
L
Kaufdatum:
Preis:
R
Car Audio and Navigation Systems
GERÄTE-PASS
AUDIO SYSTEME
Fahrzeugmarke:
Typ:
Amtl. Kennzeichen:
Name des Halters:
Straße:
Wohnort:
Bitte füllen Sie diesen Pass vollständig aus und bewahren Sie ihn
außerhalb des Fahrzeugs auf:
Im Falle eines Diebstahls wird für Sie die Schadensabwicklung mit der
Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung
nach den Tätern.
Caution/Vorsicht /Attention/Attenzione /
Prudencia /Let op /Försiktigt /Forsigtig
R
English
For VW/Audi cars from Model Year 1999 please do not connect the blue cables together and ask
your local dealer for support.
Deutsch
Bei einigen VW/Audi Fahrzeugen ab dem Modelljahr 1999 dürfen die beiden blauen Kabel am ISOStecker nicht zusammengesteckt werden - bitte fragen Sie dazu Ihren VW/Audi oder Alpine Händler.
Français
Pour les véhicules VW et AUDI depuis l’année-modèle 1999, ne pas connecter les fils bleus du
faisceau autoradio ensemble et se rapprocher de votre revendeur pour plus d’informations.
Italiano
Non collegare i due fili blu per vetture VW/Audi dal MY 1999 in poi, per maggiori informazioni
contattare il vostro rivenditore.
Español
Para vehículos VW/Audi modelos desde 1999: No conecte juntos los cables azules y consulte con
su distribuidor Alpine para más detalles.
Nederlands
Voor VW/AUDI wagens vanaf Model 1999, gelieve de twee blauwe draden niet aan elkaar aan te
sluiten en uw plaatselijke dealer te contacteren.
Svenska
På VW och Audi bilar från och med årsmodell - 1999 får de blå kablarna ej kopplas ihop. Kontakta
din återförsäljare för vidare information.
Dansk
ADVARSEL: Vedr. VW/AUDI modeller årgang 1999 eller senere: De blå kabler må ikke
sammenkobles. Kontakt din lokale ALPINE forhandler for nærmere instruktion.
INA-N033R
68P60669Y24-O (Y)
Download PDF