Sienna | SSM-4618 | Instruction manual | Sienna SSM-4618 Instruction manual

Aqua Laser, Aqua Pro, Aqua Pro V
Steam Mop
SSM-0618
SSM-3618
SSM-4618
INSTRUCTION MANUAL
INTRODUCTION
Thank you for choosing Sienna for your household cleaning needs. Our floor care
products use the active power of steam without the use of chemicals; making it a
green product that is safe for the ecosystem. You have begun the first step into
transforming your house into a green, environmentally safe home. Our Sienna steam
products are a modern way of cleaning that is efficient and far more sanitary than
conventional methods.
You can achieve a high level of effective cleaning by decreasing cleansing power thru
steam. When using our 100% cotton microfiber cloth pad to enhance absorbency
combined with the power of germ killing steam, dirt and grime can be eliminated in a
matter of seconds. The tiny hot vapor molecules penetrate porous surfaces being
cleaned, expanding and forcing dirt, debris, and bacteria to the surface. When used
correctly, our steam mops can kill dust mites and certain types of bacteria pathogens
such as salmonella and E-coli on contact.
Since you do not need chemicals in order to use our products, not only will you see the
savings in your wallet, but you have provided a safer place for you and your family to
live in. We encourage you to improve your way of life, better the environment, and
spend time enjoying your clean chemical free floor.
Aqua Laser
The Aqua Laser Steam Floor Mop is an innovative product that cleans and sanitizes
your home by harnessing the natural cleaning power of hot steam vapor. This versatile
steam floor mop is well-suited to clean a variety of floor surfaces. By pressing the
trigger, The Aqua Laser heats water up to 212 F within 30 seconds that is turned into
instant steam for cleaning and sanitizing. The Aqua Laser creates a powerful sanitizing
steam vapor that lasts for up to 20 minutes. In addition, the included carpet glider
ensures that your carpet is clean and sanitized. The user-friendly design is intended to
tackle the toughest dirt and debris. It features a 1500-watt heating element, a
560ml/18.90 fl oz water tank, a 180-degree swivel head, 2 heavy-duty microfiber pads,
and much more. The fold down handle feature is great for storing the unit in compact
spaces.
Aqua Pro
The Aqua Pro is the Aqua Laser with a personal touch. You are able to control the
amount of steam that is used with 3 different settings. Scrub for deep cleaning, mop
for general day to day cleaning, or dust for quick cleaning.
Aqua Pro V
The Aqua Pro V has the most features of all Aqua products making it the most efficient
of the three. With our exclusive vibrate button, you have additional working power to
pull up dirt and grime from the problem areas on your floor.
1
SAFETY GUIDELINES
The Sienna Aqua Laser (SSM-0618), Aqua Pro (SSM-3618), and Aqua Pro V (SSM-4618)
Steam Mops are for indoor domestic floor use only. Any commercial use will void
warranty. The steamer(s) should not be used upside down or vertically. They are
designed for sanitizing and cleaning an array of floor surfaces such as carpet, ceramic tile,
marble, sealed hardwood, sealed laminate, stone and vinyl floors.
Safety Instructions:
WARNING: Be sure to read and follow all safety instructions before using
your steam mop. Proper care and maintenance will help to expand the life of
your steamer.
When using an electrical appliance, basic precautions should always be followed. To
reduce the risk of fire, electric shock, or injury:
! Be sure to unplug the electrical cord when appliance is not in use and while servicing.
! Do not leave the steamer unattended while young children, pets or infirm persons
are around.
! Children should be supervised and cautioned that the steamer is not a toy and
should not be played with.
! Do not direct steam towards people, pets, electrical appliances, or electrical outlets.
! Do not immerse the steamer in water or other liquids.
! Do not handle steamer with wet hands.
! Do not pull power cord to disconnect appliance from socket or use cord as a handle.
! Be sure to keep cord away from heat, water, and sharp edges.
! Do not use if cord or plug is damaged.
! Do not use extension cords or outlets with inadequate current carrying capacity.
! Do not use steamer on any steam sensitive material such as velvet, leather, wax
polished furniture or floors, synthetic and other delicate fabrics.
! Do not use on unsealed hardwood floors. By doing so, you may remove the sheen
from the steam. It is recommended to test an isolated area with the steam mop
before proceeding. As a precaution, you should check the manual made by the floor
manufacturer for proper care instructions.
! Never put cleaning detergents or chemicals into the steamer as it will make the
product unsafe and damage the unit.
! Do not use steamer without floor cloth pad in place.
! Use only manufacturer's recommended accessories.
! Stop using steamer if circuit breaker activates. Beware of risk of shock.
! Wear proper shoes when operating your steamer. Open-toed shoes, slippers or bare
feet may cause you to slip and fall or cause hot steam on your feet.
! Do not use steamer on stairs.
! Allow your steamer to cool down before storing in a cool, dry place.
2
KEY FEATURES
A. TRIGGER
B. HANDLE CORD WRAP
C. HANDLE
D. FOLDING HANDLE BUTTON
E. CARRYING HANDLE
F. LED
G. STEAM CONTROL (Aqua Pro & Aqua Pro V)
H. VIBRATE (Aqua Pro V)
I. WATER TANK RELEASE LOCK
J. WATER TANK
K. FILTER
L. STEAMER BODY
M. STEAMER HEAD
N. CARPET GLIDER
O. QUICK RELEASE CORD WRAP
P. POWER CORD
Q. LOWER CORD WRAP
R. SCREW
S. CLOTH PAD
3
ASSEMBLY AND USE
1) Attach steamer head to body of the unit.
2) Secure steamer head with screw provided until fully tightened (use Philips
screwdriver.)
3) Push the steamer handle straight up by pressing on the folding handle button.
4) Set cloth pad on the floor. Be sure to loosen drawstring on the pad so that the
steamer head will fit properly inside the pad. Place steamer head onto cloth pad so
that steamer head is sitting inside pad. Pull drawstring to tighten cloth pad over the
steamer head to assure a tight fit for cleaning.
5) Push the water tank release lock backward to take out the water tank. Unscrew the
water tank cap and fill with cool tap water.
4
NOTE: The steamer does not require distilled water. Residents in areas with hard water
should used distilled water for better performance.
6) Twist the quick release cord wrap clockwise to un-wrap the power cord completely.
Hang the cord on the handle cord wrap for better use of the steamer when moving
and cleaning.
7) The LED will illuminate when the steamer is ready for cleaning (Aqua Laser only).
NOTE: It is recommended that another high wattage appliance is not operated on the
same circuit to avoid a circuit overload.
CAUTION: Upon initial use, please hold trigger to allow the water to flow
thru the system for approximately 30 seconds to prime the unit.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE
WAX MAY BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON
UNSEALED WOOD FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN
EXTENDED PERIOD OF TIME. THIS MAY CAUSE THE WOOD GRAIN TO RISE. IT
IS RECOMMENDED THAT A SECTION BE TESTED IN AN ISOLATED AREA OF THE
FLOOR. IT IS ALSO RECOMMENDED THAT YOU CHECK THE USE AND CARE
INSTRUCTIONS FOR CLEANING FROM THE FLOOR MANUFACTURER TO ENSURE
STEAM CLEANING IS ACCEPTABLE FOR YOUR FLOOR.
8) Slowly pass over surface to be cleaned while pressing trigger to emit steam. It is
recommended to sweep or vacuum floor prior to using the steamer.
9) With steam control options, (available on models Aqua Pro and Aqua Pro V) push
button to choose a setting that best fits your cleaning needs. Scrub for deep
cleaning, mop for general day to day cleaning, or dust for quick cleaning.
10) Use vibrate setting (only offered on Aqua Pro V) in order to provide additional
cleaning power.
Steam
control
Steam
control
SCRUB
SCRUB
MOP
MOP
DUST
DUST
Push backward to
remove water tank
Push backward to
remove water tank
Vibrate
AQUA PRO
AQUA PRO V
CAUTION: To sanitize an area of your floor, leave the steamer over the
area for a minimum of 8 seconds, but no longer than 15 seconds. Leaving the
steamer in a stationary position for a longer period than recommended may
cause build up of pail residue. This residue can be removed by using a
decalcifying product or with a few drops of vinegar.
5
11) When steamer stops emitting steam, after approximately 15 to 20 minutes of use,
simply remove the water tank, refill, and continue cleaning.
WARNING: NEVER RUN THE STEAMER WITHOUT WATER.
12) When you finish cleaning, unplug power cord from outlet. Be sure to empty water
tank and carefully remove cloth pad from steamer head. Store the unit upright in a dry
area or hang it by the storage hook.
CAUTION: The cloth pad may be very hot.
Carpet Glider
13) Lay carpet glider on the floor in an upright position with the triangular flat surface
facing downward. Place steam mop head on top of glider as illustrated below.
IMPORTANT: The carpet glider is not designed to be fixed to the floor head for safety
reasons including preventing burns. It is designed for use on soft carpet areas only, not
for hard floor surfaces.
CLEANING AND MAINTENANCE
CAUTION: Prior to cleaning or maintaining your steam mop, isolate the
unit by removing the cord from the power socket and avoid immersing the
unit in water.
1) The microfiber cloth pads can be machine washed in hot water and tumble dry. Do
not use bleach or fabric softener. Allow to dry fully before use.
2) Wipe steamer with soft cloth when/if necessary.
Product Specs:
Voltage supply: 120, 60 Hz
Output: 1500 W
Water tank capacity: max. 18.90 fl oz.
Cord: 16.4 ft.
Weight: 6.6 lbs.
Protection class: 2
6
TROUBLESHOOTING
CAUTION: Prior to cleaning or maintaining your steam mop, isolate the unit by
removing the cord from the power socket.
PROBLEM
LED is not on
SOLUTION
=
=
=
=
No steam
=
=
Pale residue left on floor
=
=
Ensure steamer power cord is correctly plugged into
a 120V AC power outlet only.
Ensure circuit breaker is operational.
Try operating steamer from another power outlet.
If unit is still not working, call customer service at
1-888-574-3662.
Ensure water tank is full.
Calcium and mineral deposits can build up
and impact the performance of your steamer,
use distilled water if necessary.
This can be caused by leaving the steamer in the
same spot for too long. Residue can be removed
with household white vinegar or a decalcifying
product.
Alternatively, reheat the area for one minute to
remove residue (do not overheat area.)
Buttons are not working
properly
=
Unplug the unit from the power outlet for
5 minutes then plug back in.
Steamer is leaking water
all over the floor
=
The microfiber cloth pad may be overused and
needs to be changed out with additional cloth
pad(s) provided. Cloth pads can be cleaned in
washer/dryer. Over time, however, the cloth pads
can start to wear.
Be sure microfiber cloth pad is attached properly.
Condensation may form inside the unit dripping
water upon initial use; continue to press the steam
release button until steam appears. If necessary,
lay a towel on the floor underneath unit during
process.
If the unit should continue to leak water, unplug
and wait 5 minutes before trying again.
=
=
=
Floors are cloudy, streaky or
spotty after mopping floor
=
=
=
Be sure to use light detergent when cleaning mop
pads, any residue on pad may be transferred onto
floor.
Replace cloth pad with a new, clean one for
effective cleaning.
If initial use of steamer, past cleaning products
may have left a residue on your floor, continue to
go over effected area until there is not residue or
steaks left behind.
7
ONE YEAR LIMITED WARRANTY
Our Sienna product warranty extends only to the original customer
purchaser of the product. It is warranted by the manufacturer to be free
from all defects in materials or workmanship for a period of one year
from the date of original purchase. This warranty is subject to the
following conditions, exclusions and exceptions.
Exclusions:
This warranty does not cover normal wear and tear of parts and does not
apply to any product that has been tampered with or used for
commercial purposes. This warranty does not cover damage caused by
misuse, abuse, negligent handling or damage due to mishandling in
transit or shipping. This warranty does not cover damage or defects
caused by or resulting from repairs, service or alterations to the product
or any of its parts, which have been performed by a repair person not
authorized by the manufacturer. This warranty is effective only if the
product is purchased and operated in the USA or Canada, and does not
extend to any units which have been used in violation of written
instructions furnished by the manufacturer, or to units which have had
the serial number removed, altered, defaced or rendered illegible.
Performance:
During the limited warranty period, the manufacturer will, at its option,
repair or replace free of charge a defective product or part that is
covered by this warranty. As a matter of warranty policy, the
manufacturer will not refund the purchase price. A repaired or
replacement product will be covered by this warranty for the balance of
the initial one year warranty period and an additional one month period.
To contact Customer Service:
Write: Anvid Products, Inc.
1401-1499 Greenville Road
Livermore, CA 94550
E-mail: customerservice@anvidproducts.com
Or call :1-888-5SIENNA (1-888-574-3662)
Please refer to your product name and model number when contacting
Customer Service.
8
Customer Service will give you further instructions for returning a defective
product for repair or replacement. When returning a defective product,
carefully pack the item to avoid damage in shipping, the manufacturer cannot
assume responsibility for loss or damage during incoming shipment. We
recommend that you insure the package, as damage in shipping including the
shipping cost is not covered under our warranty. Be sure to include the
following items with your product: any accessories related to the product,
your name, complete address and phone number, a note describing the
problem you experienced; and a copy of your sales slip or other proof of
purchase to determine warranty status. C.O.D. shipments cannot be accepted.
Out-of-Warranty Service: A flat rate charge is applied to any product to be
serviced out of warranty. Please contact customer service for flat rate fee.
A $20.00 shipping and handling fee is to be included in your product
shipment for service used for the return of your product. Please make checks
payable to: Anvid Products, Inc. When the check is cleared from the bank, we
will then proceed to ship your repaired or replacement product.
Limitation of Remedies: No representative or person is authorized to assume
for the manufacturer any other liability in connection with the sale of our
products. This limited warranty is not transferable and any sale, transfer or
other disposition of the product voids this limited warranty. There shall be no
claims for defects or failure of performance or product failure under any
theory of tort, contract or commercial law including, but not limited to,
negligence, gross negligence, strict liability, breach of warranty and breach of
contract.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO THE DURATION OF THIS WARRANTY. Some
states do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE
PURCHASER UNDER THIS LIMITED WARRANTY, AND IN NO EVENT
SHALL THE MANUFACTURER BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSSES OR EXPENSES
YOU MAY INCUR IN CONNECTION WITH YOUR PURCHASE OR USE OF
THE PRODUCT OR FOR ANY BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not
allow the exclusion or limitation of special, incidental, or consequential
damages, so the above limitation may not apply to you. This limited warranty
gives you specific legal rights, and you may also have other rights which vary
from state to state.
Copyright
2010 Anvid Products, Inc.
Made in China
9
Printed in China
Download PDF