Marantz | SUPER AUDIO CD/DVD PLAYER DV6600 | User guide | Marantz SUPER AUDIO CD/DVD PLAYER DV6600 User guide

E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 1
Model DV6600 User Guide
Super Audio CD/DVD Player
CLASS 1
LASER PRODUCT
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 2
PRECAUTIONS
ENGLISH
ESPAÑOL
WARRANTY
GARANTIA
For warranty information, contact your local Marantz distributor.
Para obtener información acerca de la garantia póngase en contacto con su distribuidor Marantz.
RETAIN YOUR PURCHASE RECEIPT
GUARDE SU RECIBO DE COMPRA
Your purchase receipt is your permanent record of a valuable purchase. It should be
kept in a safe place to be referred to as necessary for insurance purposes or when
corresponding with Marantz.
Su recibo de compra es su prueba permanente de haber adquirido un aparato de
valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia
cuando tenga que hacer uso del seguro o se ponga en contacto con Marantz.
IMPORTANT
IMPORTANTE
When seeking warranty service, it is the responsibility of the consumer to establish proof
and date of purchase. Your purchase receipt or invoice is adequate for such proof.
Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad
de demonstrar cuándo efectuó la compra. En este caso, su recibo de compra será la
prueba apropiada.
FOR U.K. ONLY
This undertaking is in addition to a consumer's statutory rights and does not affect
those rights in any way.
ITALIANO
GARANZIA
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le distributeur local Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur. La conserver en
lieu sur pour s'y reporter aux fins d'obtention d'une couverture d'assurance ou dans le
cadre de correspondances avec Marantz.
IMPORTANT
Pour l'obtention d'un service couvert par la garantie, il incombe au client d'établir la
preuve de l'achat et d'en corroborer la date. Le reçu ou la facture constituent des
preuves suffisantes.
DEUTSCH
L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno,
o del periodo previsto dalla legge, a partire dalla data di acquisto comprovata da un
documento attestante il nominativo del Rivenditore e la data di vendita. La garanzia
sarà prestata con la sostituzione o la riparazione gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata installazione,
manutenzione effettuata da personale non autorizzato o, comunque, da circostanze
che non possano riferirsi a difetti di funzionamento dell’apparecchio. Sono inoltre
esclusi dalla garanzia gli interventi inerenti l’installazione e l’allacciamento agli impianti
di alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza Autorizzati.
Le spese ed i rischi di trasporto sono a carico del cliente.
La casa costruttrice declina ogni responsabilità per danni diretti o indiretti provocati
dalla inosservanza delle prescrizioni di installazione, uso e manutenzione dettagliate
nel presente manuale o per guasti dovuti ad uso continuato a fini professionali.
SVENSKA
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler.
GARANTI
HEBEN SIE IHRE QUITTING GUT AUF
Die Quittung dient Ihnen als bleibende Unterlage für Ihren wertvollen Einkauf Das
Aufbewahren der Quittung ist wichtig, da die darin enthaltenen Angaben für
Versicherungswecke oder bei Korrespondenz mit Marantz angeführt werden müssen.
WICHTIG!
Bei Garantiefragen muß der Kunde eine Kaufunterlage mit Kaufdatum vorlegen.
Ihren Quittung oder Rechnung ist als Unterlage ausreichend.
För information om garantin, kontakta Marantz lokalagent.
SPAR KVITTOT
Kvittot är ett inköpsbevis på en värdefull vara. Det skall förvaras säkert och hänvisas
till vid försäkringsfall eller vidkorrespondens mod Marantz.
VIKTIGT
Fö att garantin skall gälla är det kundens sak att framställa bevis och datum om köpet.
Kvitto eller faktura är tillräokligt bevis fö detta.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol
artikel en dienen op een veilige plaats bewaard te worden voor evt, verwijzing bijv, in
verbend met verzekering of bij correspondentie met Marantz.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de consument een
gedateerd bewijs van aankoop te tonen. Uw kassabon of factuurzijn voldoende bewijs.
CE MARKING
English
The DV6600 is in conformity with the EMC directive
and low-voltage directive.
Français
Le DV6600 est conforme à la directive EMC et à la
directive sur les basses tensions.
Deutsch
Das Modell DV6600 entspricht den EMC-Richtlinien
und den Richtlinien für Niederspannungsgeräte.
Nederlands
De DV6600 voldoet aan de EMC eisen en de vereisten
voor laag-voltage.
–2–
Español
El DV6600 está de acuerdo con las normas EMC y las
relacionadas con baja tensión.
Italiano
Il DV6600 è conforme alle direttive CEE ed a quelle
per i bassi voltaggi.
Svenska
DV6600 är tillverkad i enlighet med EMC direktiven och
direktiven för lågvoltsutrusning.
EN
E61M7ED/E61M9ED(EN).qx3
English
–
–
–
–
–
–
–
–
–
–
–
–
05.8.4 5:27 PM
Page 3
– Zorg dat er tenminste 1 meter vrije ruimte boven het toestel is.
– Zorg dat er 0,2 meter vrije ruimte rond het toestel is.
– Mors nooit vloeistoffen over dit apparaat. Laat het apparaat nakijken door
een gekwalificeerd servicemonteur wanneer er vloeistof in het
apparaat is gemorst.
– Plaats geen met vloeistof gevulde voorwerpen zoals vazen op het apparaat.
– Wanneer de schakelaar in de stand uit staat, is de NETVOEDING naar het
apparaat niet volledig uitgeschakeld.
WARNINGS
Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
Do not insert anything into the equipment through the ventilation holes.
Do not handle the mains lead with wet hands.
Do not cover the ventilation with any items such as tablecloths,
newspapers, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on
the equipment.
When disposing of used batteries, please comply with governmental
regulations or environmental public instruction’s rules that apply in your
country or area.
Do not place anything about 1 meter above the top panel.
Make a space of about 0.2 meter around the unit.
Never spill liquid of any kind on this unit. If liquid is spilled into the unit,
consult qualified service engineer.
No objects filled with liquids, such as vases, shall be placed on the
equipment.
When the switch is in the OFF position, the equipment is not completely
switched-off from MAINS.
Français
Español
AVERTISSEMENTS
–
–
–
–
–
Ne pas exposer l’appareil à la pluie ni à l’humidité.
Ne pas essayer de retirer le boîtier de l’appareil.
Ne rien insérer dans l’appareil par les orifices de ventilation.
Ne pas manipuler le cordon d’alimentation avec les mains mouillées.
Ne pas recouvrir les ouïes de ventilation avec un objet quelconque comme
une nappe, un journal, un rideau, etc.
– Ne placer aucune source de flamme nue, comme une bougie allumée,
sur l'appareil.
– Pour mettre au rebut les piles usées, respecter les lois gouvernementales
ou les règlements officiels concernant l’environnement qui s'appliquent à
votre pays ou région.
– Ne placer aucun objet à moins d'un mètre environ du panneau supérieur.
– Veiller à ce qu’aucun objet ne soit à moins de 0,2 mètre des côtés de
l'appareil.
– Ne renverser aucun liquide sur cet appareil. Si du liquide se répand
dans l’appareil, consulter un ingénieur de service qualifié.
– Ne placer aucun objet rempli de liquide, tel que la vase, sur l’appareil.
– Quand même que la touche d'alimentation est mis hors service, l’appareil
n'est pas mis hors circuit complètement.
Deutsch
Italiano
WARNHINWEISE
–
–
–
–
–
–
–
–
–
–
–
–
Das Gerät nicht Regen oder Feuchtigkeit aussetzen.
Die Abdeckung nicht vom Gerät abnehmen.
Keine Gegenstände durch die Belüftungsschlitze stecken.
Das Netzkabel nicht mit feuchten oder nassen Händen anfassen.
Decken Sie die Lüftungsöffnungen nicht mit einem Tischtuch, einer
Zeitung, einem Vorhang usw. ab.
Es dürfen keine Gegenstände mit offener Flamme, wie etwa brennende
Kerzen, auf dem Gerät aufgestellt werden.
Beachten Sie bei der Entsorgung der verbrauchten Batterien alle geltenden
lokalen und überregionalen Regelungen.
Darauf achten, daß über dem Gerät ein Freiraum von mindestens 1 meter
vorhanden ist.
Auf allen Geräteseiten muß ein Zwischenraum von ungefähr 0,2 meter
vorhanden sein.
Niemals irgendwelche Flüssigheiten auf dem Gerät verschütten. Falls
dennoch Flüssigkeit in das Gerät eindringen sollte, suchen Sie bitte
einen qualifizierten Kundendiensttechniker auf.
Es soll kein mit Wasser gefülltes Gefäß, wie z.B. eine Vase, auf das Gerät
gestellt werden.
Wenn der Schalter sich der AUS-Stellung befindet, ist das Gerät nicht völlig
vom Stromnetz getrennt.
Nederlands
WAARSCHUWINGEN
–
–
–
–
–
Stel het apparaat niet bloot aan regen of vocht.
Verwijder de afdekplaat van het apparaat niet.
Duw niets door de ventilatieopeningen in het apparaat.
Raak het netsnoer niet met natte handen aan.
Bedek de ventilatieopeningen niet met enige voorwerpen, zoals
tafelkleden, kranten, gordijnen, enz.
– Plaats geen brandende voorwerpen, zoals kaarsen, op het apparaat.
– Volg bij het weggooien van verbruikte batterijen de overheidswetgeving
of milieuvoorschriften op die van kracht zijn in het land of de regio waarin
u zich bevindt.
ADVERTENCIAS
– No exponga el equipo a la lluvia ni a la humedad.
– No extraiga la tapa del equipo.
– No introduzca nada en el interior del equipo a través de los orificios de
ventilación.
.
– No maneje el cable de alimentación con las manos mojadas.
– No cubra la ventilación con objetos como manteles, periódicos, cortinas,
etc.
– No deben colocarse sobre el equipo elementos con fuego, por ejemplo
velas encendidas.
– Cuando se eliminen baterías usadas, deben cumplirse las
reglamentaciones oficiales o las normas de protección medioambiental
aplicables en su país o en su zona.
– No ponga nada a menos de 1 metro por encima del panel superior
– Deje un espacio de unos 0,2 metro alrededor de la unidad.
– No derrame nunca líquidos de ninguna clase en este aparato. Si se
derrama algún líquido en el interior del aparato, consulte a un
ingeniero de servicio cualificado.
– No ponga objetos llenados de líquido como florereos en este aparato.
– Aun cuando el botón de alimentación está en la posición apagada, no se
apague la alimentación principal completamente en el aparato.
AVVERTENZE
– Non esporre l’apparecchio alla pioggia o all’umidità.
– Non rimuovere il coperchio dell’apparecchio.
– Non introdurre oggetti all’interno dell’apparecchio attraverso i fori di
ventilazione.
– Non toccare il cavo di alimentazione con le mani bagnate.
– Non coprire le fessure di ventilazione con tovaglie, giornali, tende od oggetti
analoghi.
– Non posare sull’apparecchio sorgenti di fiamme scoperte quali candele
accese.
– Smaltire le pile usate in conformità alle norme governative o disposizioni
ambientali vigenti nel proprio paese o zona.
– Non posare nulla per circa un metro sopra il pannello superiore.
– Lasciare 0,2 metro liberi tutto intorno l’unità.
– Non spruzzare mai liquidi di qualsiasi tipo su quest’unità. In caso di
penetrazione di liquido nell'unità, rivolgersi ad un tecnico qualificato.
– Non posizionare oggetti contenenti liquidi, come ad esempio vasi,
sull'apparecchiatura.
– Quando l’interruttore si trova nella posizione off, l’apparecchiatura non è
completamente scollegata dalla RETE.
Svenska
–
–
–
–
–
–
–
–
–
–
–
–
–3–
VARNINGAR
Utsätt inte utrustningen för regn eller fukt.
Ta inte bort utrustningens hölje.
För inte in föremål i utrustningen genom ventilationshålen.
Hantera inte nätsladden med våta händer.
Täck inte för ventilationsöppningarna med några föremål som till exempel
bordsdukar, dagstidningar, gardiner e.d.
Inga föremål med öppen låga, som till exempel tända stearinljus, bör
placeras på utrustningen.
Följ de lagar och miljöskyddsråd som gäller i det land eller område där du
bor när du gör dig av med batterier.
Placera inte någonting närmare än 1 meter ovanför apparaten eller
enheten.
Se till att det finns omkring 0,2 meter fri plats runt omkring enheten.
Spill aldrig vätskor på DVD-spelaren.Om du skulle spilla vätska inuti den,
måste du vända dig till en kvalificerad servicetekniker.
Ställ inte föremål med vätskor, t.ex. vaser, ovanpå apparaten.
Även om omkopplaren stalls i avstängt läge (off) är strömförsörjningen till
apparaten inte helt bruten utan den är fortfarande ansluten till nätet.
EN
E61M7ED/E61M9ED(EN).qx3
CAUTION :
05.8.4 5:27 PM
Page 4
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
WARNINGS FOR LASER RADIATION
CAUTION :
INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
DANGER :
INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. This product and the accessories packed together are the applicable product to the WEEE directive except batteries.
Please dispose of any materials in accordance with your local recycling regulations.
When discarding the unit, comply with your local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
TABLE OF CONTENTS
■ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
WARNINGS FOR LASER RADIATION. . . . . . . . . . . . . . 4
■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for the Progressive Scan Outputs . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . 9
Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Displays during Operation . . . . . . . . . . . . . . . . . . . . . . 11
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . 11
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Description - Rear Panel . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an Audio System . . . . . . . . . . . . . . . . . . 13
Connection to 5.1-channel Surround Sound System. . . 14
Connection to a TV (for Video) . . . . . . . . . . . . . . . . . . . 15
Connection to a TV with an HDMI Terminal . . . . . . . . . 16
■ PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CANCELLING AND CALLING BACK
THE PBC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . 17
HDMI Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AUDIO EX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DVD Audio Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLAYBACK OF ALL GROUPS . . . . . . . . . . . . . . . . . 18
PLAYBACK FROM A DESIRED GROUP . . . . . . . . . 18
PAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLAYBACK OF THE BONUS GROUP . . . . . . . . . . . 18
Still / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 18
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Playing the Disc Recorded in VR Mode
(Video Recording Format) . . . . . . . . . . . . . . . . . . . . . . 18
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 19
■
■
■
■
■
–4–
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 19
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 19
BY USING THE SEARCH MODE BUTTON . . . . . . . 19
BY USING THE SKIP BUTTONS H G . . . . . . . . 19
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
BY USING THE SEARCH MODE BUTTON . . . . . . . 20
BY USING THE SKIP BUTTONS H G . . . . . . . . 20
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 20
REPEAT TRACK / GROUP / ALL . . . . . . . . . . . . . . . 20
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Programme Playback (DVD-A / Super Audio CD / CD) . . 21
Random Playback (DVD-A / Super Audio CD / CD) . . . 21
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 21
DivX® Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . 24
Programme Playback (MP3 / JPEG / WMA) . . . . . . . . . 25
Random Playback (MP3 /JPEG / WMA) . . . . . . . . . . . . 25
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Sound Mode / Stereo Sound Mode . . . . . . . . . . . . . . . 26
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 27
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Speaker Setting for ANALOG AUDIO . . . . . . . . . . . . . . 29
Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
PARENTAL LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . 30
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 30
CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . . 30
Others Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Reset to the Default Settings (except for
PARENTAL and VIDEO OUT) . . . . . . . . . . . . . . . . . . . 31
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . 32
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 33
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
PIN CONNECTION (A/V EURO CONNECTOR). . . . . . 35
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 5
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorised by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering
or disassembly is prohibited.
Apparatus Claims of U. S. Patent Nos, 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited
viewing uses only.
Notice for the Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525 or 625 progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p or 625p DVD player, please contact our customer service centre.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
User Guide
•••••••••••••••
Product
1 registration
card • • • • • • • • • • 1
+1
0
1
5
8
ME
NU
TOP
B
ME
NU
L
S.
ANG
LE
DIS
PLA
Y
i
SKI
P
FW
D
ZOO
M
PLA
Y
C
RE
MO
TE
RC CO
660 NT
0DV RO
LLE
R
SOU
ND
MO
DE
GR
OU
P
E
PAG
E
REV
F
PAU
SE
STO
P
B
j
D
s
RET
URN
TITL
E
MO
DE
AUD
IO
ENT
ER
SET
UP
K
RAN
DO
M
REP
EAT
CLE
AR
7
0
A-B
4
SEA
MOD RCH
E
9
POW
ER
2
6
3
A
OPE
CLO N/
SE
Remote
Audio (Red and White) Remote control
“AA” (R6P)
control • • • • • • • • 1 batteries • • • • • • 2 cable • • • • • • • • • • • 1 bus cable (Orange)
•••••••••••••••1
Video (Yellow)
cable • • • • • • • • • • • 1
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual,
Description refers to playback of
DVD-V :
MP3 :
DVD-Video discs.
Description refers to playback of
DVD-A :
JPEG :
DVD-Audio discs.
Description refers to playback of
VCD :
WMA :
Video CDs.
Description refers to playback of
Super
DivX® :
Audio CD :
Super Audio CDs.
Description refers to playback of
CD :
DVD-RW :
Audio CDs.
with the following meanings.
Description refers to playback of
discs formatted with MP3.
Description refers to viewing of
JPEG discs.
Description refers to playback of
discs formatted with WMA.
Description refers to playback of
discs formatted with DivX®.
Description refers to playback of
the VR mode (Video Recording format).
is a trademark of DVD Format/Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording format).
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
–5–
EN
English
INTRODUCTION
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 6
ABOUT THE DISCS
Playable Discs
Playable
discs
Mark (logo)
Region code
Recorded
signals
Disc size
-
Digital audio
+
Digital video
(MPEG2)
12 cm
or
8 cm
DVD-Audio
* 2, 3, 5
Disc types
Example
Track 1
Group 1
Track 2
Track 3
Group 2
Track 4
Track 1
Track 2
DVD-Video
* 1, 2, 3, 5
2
or
DVD-RW
DVD-R
Digital video 12 cm
(MPEG2)
or
DivX®
8 cm
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
* 1, 3, 4, 5,
6, 7, 8
Video CD
* 1, 3, 5, 9
Super
Audio CD
Audio CD
DIGITAL VIDEO
-
Digital audio
-
Digital audio
MP3
WMA*10
Digital picture
(JPEG)
DivX®
* 4, 5, 7,
8, 9
Picture CD
-
Video CD,
Super
Audio CD,
Audio CD
Digital audio
-
* 4, 5
CD-RW
CD-R
Sound
and
Pictures
JPEG
12 cm
or
8 cm
Example
Track 1
MP3,
JPEG,
WMA,
DivX®
Track 2
Example
Track 1
Track 3
Track 4
Track 5
Track 4
Track 5
Group 1
Track 2
Track 3
Track 6
Group 2
Track 6
12 cm
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This player conforms to the PAL colour system. Also you can play discs recorded with the NTSC system via a PAL
system TV set.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or
special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*6: Only the discs recorded in the video format or Video Recording format, and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back
at all or normally (the picture or sound may be distorted, etc.).
*7: If there is too much recordable space left on a disc (the used portion is less than 55mm across), it may not play back
properly.
*8: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*9: This unit conforms to ver.1.1 and ver.2.0 of Video CD standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD.
Ver.2.0 (with PBC function): While using a Video CD with PBC function, “Pbc” appears on the screen and the display.
NOTE: When playing Video CDs with PBC function, some operations (e.g., track search and repeat tracks) cannot be
performed. Cancel PBC function temporarily to perform those operations (refer to page 17).
What is PBC? “PBC” stands for Playback Control.
You can play interactive software using menu screens. Refer to instructions in the Video CD.
*10: This player cannot play the disc contents protected by Windows Media Digital Rights Management (DRM).
NOTE: This player cannot play the DVD-RW discs that supports CPRM (Content Protection for Recordable Media).
This player cannot play the DVD-R discs recorded in VR mode (Video Recording format).
¡ NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-I / Photo CD / DVD with region codes other than 2 or ALL / DVD-ROM for personal computers /
CD-ROM for personal computers
¡ Any other discs without compatibility indications
CAUTION:
• Use caution not to pinch your finger in the disc slot.
• Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player.
–6–
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 7
¡Progressive Scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional 625i (576i) television
signals.
¡Analog 5.1-channel Dolby and DTS surround output
This player is equipped with analog 5.1-channel Dolby and
DTS surround audio out jacks for playback.
¡Dolby Digital Sound
By hooking this player up to a Multi - Channel Dolby
Digital decoder, you can enjoy high-quality Dolby Digital
5.1 channel surround sound as heard in the movie
theatres.
¡Search
Chapter search:
Title search:
Group search:
Page search:
Track search:
Time search:
¡Repeat
Chapter:
Title:
Track:
All:
A-B:
Group:
¡HDMI (High-Definition Multimedia Interface)
You can enjoy clearer video output when connecting this
player to a display equipment with an HDMI terminal.
¡Still/Fast/Slow/Step Playback
Search for
Search for
Search for
Search for
Search for
Search for
or track.
a
a
a
a
a
a
desired
desired
desired
desired
desired
desired
chapter.
title.
group.
page.
track.
time point of a title
Repeated playback of a chapter of the disc.
Repeated playback of a title of the disc.
Repeated playback of a track of the disc.
Repeated playback of the entire disc.
(exclude DVD-Video)
Repeated playback of a part between two points.
Repeated playback of a folder of the
DVD-Audio/Super Audio CD/MP3/JPEG/WMA/
DivX® disc.
¡Zoom
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
2-time or 4-time magnified screen can be displayed.
¡Marker
The part designated by user can be called back.
¡Random Playback for DVD-Audio, Super Audio
CD, Audio CD, MP3, JPEG, and WMA
¡Resume Play
This player can shuffle the order of tracks to play them in
random order.
You can resume playback from the point at which the play
has been stopped even if the power is turned off.
¡Programme Playback for DVD-Audio, Super
Audio CD, Audio CD, MP3, JPEG, and WMA
¡Component Video Out Jacks
Jacks located on the back of the DVD player which are
used to send high-quality video to a TV via Component
Video In Jacks.
You can programme the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
¡Bit rate indication
¡DRC (Dynamic Range Control)
You can display DVD menus in a desired language if the
language is available on the DVD.
You can compress the range of sound volume.
¡Auto Power Off
¡MPEG sound
The power turns off automatically if there is no activity at
the player or its remote control for more than 30 minutes.
(Refer to page 31.)
This player can handle a disc that supports MPEG audio
when it is connected to an MPEG decoder.
¡Displaying JPEG files
¡Subtitles in a desired language
Kodak Picture CDs can be played. Still images stored in
JPEG format on CD-R/RW can also be played.
You can select a desired language for subtitles if the
language is available on the disc.
¡Reproducing WMA files
¡Selecting a camera angle
You can enjoy WMA files which are recorded on CD-R/RW.
You can select a desired camera angle if a disc contains
sequences recorded from different angles.
¡Reproducing DivX® files
You can enjoy DivX® files which are recorded on DVDR/RW or CD-R/RW.
• Official DivX CertifiedTM product
• Plays DivX®5, DivX®4, DivX®3, and DivX® VOD video
content (in compliance with DivX CertifiedTM technical
requirements).
• This player supports Quarter Pixel.
• This player does not support GMC.
¡Choices for audio language and sound mode
You can select a desired audio language and sound mode
if different languages and modes are available on the disc.
¡Parental Lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Super Audio CD multi-channel playback compatibility
In addition to playing DVD-Video and DVD-Audio discs,
this player can play multi-channel Super Audio CDs with a
playback frequency range covering 100kHz and a dynamic
range of 120dB or greater within the audible frequency
range, and a maximum of 5.1 channels can be output.
¡AUDIO EX
The sound quality of analog audio output is improved by
turning off analog video signal output and the front panel
display.
¡Automatic detection of discs
This player automatically detects if a loaded disc is DVDVideo, DVD-Audio, Video CD, Super Audio CD, Audio CD,
MP3, JPEG, WMA, or DivX®.
¡Playing an MP3 disc
You can enjoy MP3 files which are recorded on CD-R/RW.
¡Direct Search
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
You can search a desired title, chapter, and track with the
numeric buttons during playback or in stop mode.
¡On-screen display
Information about the current operation can be displayed
on the TV screen, allowing you to confirm the currently
active functions (such as programme playback).
“WMA” (Windows Media Audio) is a new audio
codec developed by Microsoft® in the United
States of America.
–7–
EN
English
English
FEATURES
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 8
FUNCTIONAL OVERVIEW
FRONT PANEL
36
STANDBY
POWER ON/STANDBY
A
HDMI
1 2
AUDIO EX.
OPEN/CLOSE
3 4
6 7/8 9 10 1112/13
5
REMOTE CONTROL
OPEN/
CLOSE
POWER
1
A
5
34
SEARCH
MODE
14
1
2
3
4
5
6
7
8
9
0
+10
A-B
15
16
17
REPEAT
CLEAR
RANDOM
18
SETUP
TOP MENU
19
20
33
K
ENTER
s
B
21
22
23
24
L
RETURN
ANGLE
SUBTITLE
AUDIO
ZOOM
DISPLAY
MODE
25
7
10
SKIP
j
i
STOP
PLAY
C
REV
8
MENU
E
B
PAUSE
F
GROUP
32
31
30
29
12
9
FWD
D
13
11
PAGE
26
SOUND MODE
28
27
REMOTE CONTROLLER
RC6600DV
NOTE:
• The buttons with circled numbers can only be operated
with the remote control.
35
1. POWER (ON/STANDBY) Button [page 17]
2. STANDBY Indicator
This indicator lights when the DVD player turns off.
3. HDMI Button [page 17]
Press to set the HDMI output mode.
4. AUDIO EX. Button [page 17]
Press to activate AUDIO EX function to reduce noise level.
5. OPEN/CLOSE Button [page 17]
6. Disc loading tray
7. H (SKIP DOWN) Button [page 19]
Plays back from the beginning of the current chapter or
track.
8. h (REV SEARCH) Button [page 19]
Press more than 2 seconds when you use the front panel
button for this function.
9. PLAY Button [page 17]
10. STOP Button [page 17]
11. PAUSE Button [page 18]
12. G (SKIP UP) Button [page 19]
Plays back from the beginning of the next chapter or track.
13. g (FWD SEARCH) Button [page 19]
Press more than 2 seconds when you use the front panel
button for this function.
14. SEARCH MODE Button [page 19]
15. A-B REPEAT Button [page 21]
16. REPEAT Button [page 20]
17. RANDOM Button [page 21]
18. CLEAR Button [page 20]
19. SETUP Button [page 27]
20. ENTER Button [page 17]
21. Cursor Buttons [page 17]
Use when making settings while watching the display on
a TV screen.
22. RETURN Button [page 18]
23. ANGLE Button [page 26]
Press to change the camera angle to see the sequence
being played back from a different angle.
24. SUBTITLE Button [page 26]
Press to select a desired subtitle language.
25. ZOOM Button [page 19]
26. GROUP Button [page 18]
27. SOUND MODE Button [page 26]
28. PAGE Button [page 18]
29. MODE Button [page 18]
30. DISPLAY Button [page 24]
31. AUDIO Button [page 25]
Press to select a desired audio language or sound mode.
32. MENU Button [page 17]
33. TOP MENU Button [page 17]
34. Numeric Buttons [page 17]
35. Panel Display, Remote Sensor Window
36. AUDIO EX. Indicator
This indicator lights when the AUDIO EX. button is ON.
–8–
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 9
FUNCTIONAL OVERVIEW
English
Tour of the Remote Control
Buttons on remote control work in different ways for DVD-Video, DVD-Audio, Video CD, Super Audio CD, Audio CD, MP3,
JPEG, WMA and DivX®.
Refer to the following table for correct use.
DVD-Video, DVD-Audio
POWER Button
VCD
Super Audio CD, CD,
MP3, JPEG, WMA
DivX®
• To turn on or to
standby the unit.
• To turn on or to
standby the unit.
• To turn on or to
standby the unit.
• To turn on or to
standby the unit.
A-B REPEAT Button
• To mark a segment
between A and B for
repeated playback.
• To mark a segment
between A and B for
repeated playback.
• To mark a segment
between A and B for
repeated playback.
(Super Audio CD, CD)
• To mark a segment
between A and B for
repeated playback.
REPEAT Button
• To repeat playback of
a title, chapter, group
or track.
• To repeat playback of
a track or disc.
• To repeat playback of
a track or disc.
(Super Audio CD, CD) • To repeat playback of
• To repeat playback of
a track, group or disc.
a track, group, or disc.
(MP3, JPEG, WMA)
RANDOM Button
• To shuffle the playing
order of groups and
tracks. (DVD-Audio)
• To play back tracks in
random order.
• To activate the 3D
sound (Virtual
Surround system).
• To activate the 3D
• To programme a
sound (Virtual
specific playback order.
Surround system).
(DVD-Audio)
• To play all groups.
(DVD-Audio)
• To programme a
specific playback order.
• To activate the 3D
sound (Virtual
Surround system).
(CD, MP3, WMA)
• To activate the Slide
Show Mode. (JPEG)
MODE Button
ZOOM Button
• To magnify part of the • To magnify part of the • To magnify part of the • To magnify part of the
picture (x2/x4).
picture (x2).
picture (x2). (JPEG)
picture (x2).
ANGLE Button
• To access various
camera angles on
the disc.
SUBTITLE Button
AUDIO Button
DISPLAY Button
• To select a subtitle
language on the disc.
• To access various
• To select STEREO,
audio functions on the
L-ch or R-ch.
disc.
• To select STEREO,
L-ch or R-ch. (CD)
• To access various
audio functions on the
disc.
• To display the current • To display the current
disc or HDMI mode.
disc or HDMI mode.
• To display the current
disc or HDMI mode.
• To display the current
disc or HDMI mode.
• To search for a track,
time or marker.
• To search for a track.
• To search for time or a • To search for a track
or time.
marker.
(Super Audio CD, CD)
• To open or close
the disc tray.
• To open or close
the disc tray.
• To open or close
the disc tray.
• To open or close
the disc tray.
• To select a chapter,
title, track or group
directly.
• To select a track
directly.
• To select a track
directly.
• To select a track
directly.
SEARCH MODE Button • To search for a
chapter, title, track,
time or marker.
OPEN/CLOSE Button
• To select a subtitle
language on the disc.
Numeric Buttons
–9–
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 10
FUNCTIONAL OVERVIEW
Tour of the Remote Control
DVD-Video, DVD-Audio
CLEAR Button
· To clear the markers.
· To clear the numbers
entered incorrectly.
· To cancel the A point
for A-B Repeat.
MENU Button
VCD
· To clear the markers.
· To clear the numbers
entered incorrectly.
· To cancel the A point
for A-B Repeat.
Super Audio CD, CD,
MP3, JPEG, WMA
· To clear the markers.
(Super Audio CD, CD) · To clear the numbers
entered incorrectly.
entered incorrectly.
· To cancel the A point · To cancel the A point
for A-B Repeat.
for A-B Repeat.
(Super Audio CD, CD)
· To clear the numbers
· To call up the FILE LIST. · To call up the FILE
· To call up the menu on
(MP3, JPEG, WMA)
a disc.
· To return to the first
TOP MENU Button
DivX®
item in the highest
hierarchy of the FILE
LIST.
(MP3, JPEG, WMA)
· To call up the top
menu on a disc.
LIST.
· To return to the top file
in the highest
hierarchy of the FILE
LIST.
ENTER, Cursor Buttons
RETURN Button
· To move the cursor
· To move the cursor
· To move the cursor
· To move the cursor
and determine its
position.
and determine its
position.
and determine its
position.
and determine its
position.
· To return to the
previous operation in
the setup menu.
SETUP Button
· To call up the setup
menu.
SKIP Buttons
· To skip chapters/titles/
tracks.
REV / FWD Buttons
· To return to the
previous operation in
the setup menu.
· To call up the setup
menu.
· To return to the
previous operation in
the setup menu.
· To call up the setup
menu.
· To skip tracks.
· To skip tracks.
· To return to the
previous operation in
the setup menu.
· To call up the setup
menu.
· To skip tracks.
· To search forward/
· To search forward/
· To search forward/
backward through a disc.
· To begin fast forward/
backward through a
backward through a
· To begin slow forward/
reverse search.
disc.
disc.
slow reverse.
(except JPEG)
· To begin slow forward.
· To begin slow forward.
(DVD-Video)
STOP Button
· To stop playback.
· To stop playback.
· To stop playback.
· To stop playback.
· To begin playback.
· To begin playback.
· To begin playback.
· To begin playback.
· To pause playback.
· To advance playback
· To pause playback.
· To advance playback
· To pause playback.
· To pause playback.
· To advance playback
PLAY Button
PAUSE Button
frame by frame.
GROUP Button
frame by frame.
frame by frame.
· To begin playback from
a desired group.
(DVD-Audio)
SOUND MODE Button
· To select the Super
Audio CD setup.
(Super Audio CD)
PAGE Buttons
· To select a desired
background display
image for playback.
(DVD-Audio)
– 10 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 11
FUNCTIONAL OVERVIEW
Lights up when the
A-B Repeat function is on.
Lights up when the
repeat function is on.
Lights up when
Super Audio CD
is on the tray.
Lights up when the ALL
Repeat function is on.
Lights up when the inserted
disc is being played back.
Lights up when the
progressive scan
system is activated.
SACD
P.SCAN
DVD A
M
VCD
Lights up when the
inserted disc comes
to a pause.
Lights up when playing back
in slow mode. (DVD, VCD)
English
Panel Display
Displays a type of the disc
which is inserted on the tray.
• DVD: DVD-Video, DivX® on DVD
• DVD A: DVD-Audio
• M: Playing the MULTI-CH AREA
of Super Audio CD
• CD: Audio CD, MP3, JPEG, WMA,
Picture CD, DivX® on CD
• VCD: Video CD
Displays the elapsed time of the title
or track. The number of a new title,
chapter, or track is displayed when
a chapter or track is switched.
Selected HDMI output mode is displayed.
Displays during Operation
Using the Remote Control
Keep in mind the following when using the remote control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the unit.
• Use within the operating range and angle, as shown.
Power on
No disc inserted or
cannot read
STANDB
m
t5
POWER
b
na
Y
ON/STA
NDBY
HDMI
ou
Tray open
AUDIO
EX.
A
OPEN/CL
OSE
i
ith
W
60
Tray closed
ER
POW
SEARCH
MODE
A-B
AT
REPE
/
E
OPEN
CLOS
1
OM
RAND
2
4
A
R
CLEA
3
5
7
6
8
P
SETU
9
0
+10
K
s
TOP
MENU
RN
LE
IT
SUBT
RETU
ENTER
B
L
E
ANGL
ZOOM
MENU
O
AUDI
LAY
DISP
C
i
E
STOP
E
MOD
REV
SKIP
j
PLAY
B
E
P
GROU
PAUS
D
E
MOD
PAGE
D
FWD
SOUN
F
LLER
TROV
CON600D
OTE RC6
REM
Loading the Disc
Loading the Batteries
Lights up when the playback
control is activated (VCD)
1.
2.
3.
Power off
HDMI output mode is
selected. 480p is displayed
when playing back a NTSC
disc, while 576p is
displayed for PAL disc
playback.
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(hdOFF) is selected
1. Open the battery compartment cover.
2. Insert two “AA” (R6P) batteries, with each one
oriented correctly.
3. Close the cover.
Cautions On Batteries
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate close to
the main unit, replace the batteries with new ones,
even if less than a year has passed.
• The included batteries are only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
and
marks in
the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries such
as alkaline and manganese.
• Do not short-circuit, disassemble, heat or
dispose of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
– 11 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 12
CONNECTIONS
Description - Rear Panel
5.1CH AUDIO OUT
9
10
1
2 3
4
5
6
7
8
1. DIGITAL OUT Jacks
Use either an optical or coaxial digital cable to connect to an AV amplifier.
2. HDMI OUT Terminal
Use an HDMI connection cable (commercially available) to connect to a display with an HDMI terminal.
3. 2CH AUDIO OUT Jacks
Connect to the Audio input jacks of your TV or Stereo system.
4. VIDEO OUT Jack
Use a video cable to connect the jack to the Video input jack of your TV or Stereo system.
5. COMPONENT VIDEO OUT Jacks
Use these jacks if you have a TV with Component Video input jacks. These jacks provide CR/PR, CB/PB and Y video.
Component Video provides the best picture quality.
6. S-VIDEO OUT Terminal
Use the S-Video cable to connect this terminal to the S-Video input terminal of your TV for higher picture quality.
7. A/V EURO CONNECTOR
Connect to the 21-pin Scart jack of a TV. (The sound of Super Audio CD is not output.)
8. 5.1CH AUDIO OUT Jacks
Use Audio cables to connect these jacks to the 5.1 ch Audio input jacks of your AV amplifier with 5.1-channel input jacks.
9. REMOTE CONTROL IN/OUT Jacks
By connecting this DVD player to another Marantz audio component using a supplied Remote control bus cable, you can
remotely operate the components as a signal system.
10. REMOTE CONTROL EXTERNAL / INTERNAL Switch
Set this switch to “INTERNAL” when using this DVD player independently. If you use this DVD player in a system with a
Marantz receiver equipped with a remote sensor, set the switch to “EXTERNAL”.
NOTES:
• Be sure not to use both the A/V EURO CONNECTOR and COMPONENT VIDEO OUT jacks for video output at the same
time.
• When changing the “VIDEO OUT” setting (“SCART”, “COMPONENT INTERLACE” or “COMPONENT PROGRESSIVE”),
connect to a Video jack or an S-Video terminal on the TV. If the setting is changed, for example, to “COMPONENT INTERLACE” or “COMPONENT PROGRESSIVE” while the A/V EURO CONNECTOR is connected to the TV, a distorted video
signal may be output.
• When there is video output from the HDMI OUT terminal, no progressive signal is output from the COMPONENT VIDEO
OUT jacks.
• When connecting to a component with a remote sensor, be sure to connect the REMOTE CONTROL IN jack of this DVD
player to the REMOTE CONTROL OUT jack of the component.
• When connecting to a component which is not equipped with a remote sensor, be sure to connect the component to the
REMOTE CONTROL OUT jack of this DVD player.
Selecting Progressive Scan (625p <576p> or Interlaced 625i <576i>) Playback
• If your TV is compatible with progressive scanning (625p <576p>), connect the TV to the COMPONENT VIDEO OUT jacks
of the DVD player and set “VIDEO OUT” to “COMPONENT PROGRESSIVE” in the display setting. Next, set your TV to the
progressive scan mode.
Refer to page 28 for instructions on changing the display setting.
• If your TV is not compatible with progressive scan, set “VIDEO OUT” to “COMPONENT INTERLACE”.
• Use a commercially available adaptor if the Video input jacks of your TVs or monitors are the BNC type.
What is Progressive Scanning?
• Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (625i/576i) television signals.
The DCDi (Directional Correlational Deinterlacing) system of this DVD player produces smooth and
natural video images, even if really dynamic, by eliminating the jagged edges.
*“DCDi” is a trademark of Faroudja, a division of Genesis Microchip Inc.
– 12 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 13
The following show examples of connections commonly used to connect the DVD player to the TV and other
components.
If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround format,
the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard, which can be heard in movie
theatres. Use an audio coaxial digital or optical cable (commercially available) for the audio connections.
NOTES:
• Be sure to turn off the power of all components in the system before connecting another component.
• Refer to the instruction manuals for your TV, Stereo system and any other components to be connected to the
DVD player.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
DTS decoder
or
MPEG decoder
Stereo system
AUDIO
Digital Audio
Input Jacks
Audio Input
Jacks
Optical Cable
(commercially
available)
Audio Cable
(supplied)
DVD
AUDIO OUT
(Analog)
or
Audio Coaxial
Digital Cable
(commercially
available)
DIGITAL OUT
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder
NOTES (for method 2 only):
• When using an AV amplifier with a built-in decoder (Dolby Digital, DTS, or MPEG decoder) as shown in the Method 2, set
“DOLBY DIGITAL”, “DTS” or “MPEG” to “BITSTREAM” accordingly for audio output in the setup menu (refer to pages 28-29).
Set it to “PCM” for the decoder that is not used currently. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD
deck or DAT deck.
• Set “DOLBY DIGITAL”, “DTS” and “MPEG” to “PCM” for audio output in the setup menu for connecting to an MD deck or DAT
deck (refer to pages 28-29).
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing back a copyright-protected over 96kHz (88.2kHz) PCM DVD, the digital sound will be down-sampled at 48kHz
(44.1kHz), even if you set “DOWN SAMPLING” to “OFF” (refer to page 28).
• Super Audio CD sound is not output from the DIGITAL OUT.
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
– 13 –
EN
English
CONNECTIONS
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 14
CONNECTIONS
Connection to 5.1-channel Surround Sound System
Analog 5.1-channel audio signals can be output from the DVD player.
The multichannel audio signals recorded in packed PCM can be played back when an AV amplifier equipped
with analog 5.1-channel audio inputs is connected.
Center speaker
Front speaker
(right)
Front speaker
(left)
Surround
speaker
(left)
Subwoofer
AV amplifier
with
5.1-channel
input jacks
Surround
speaker
(right)
To 5.1CH
Audio Input
Jacks
AUDIO
Audio Cable
(commercially
available)
5.1CH AUDIO OUT
5.1CH
AUDIO
OUT
DVD
NOTES:
• For 5.1-channel connections, set “ANALOG AUDIO” to “5.1CH” in the setup mode and adjust “SPEAKER SIZE”, “DELAY
TIME” and “BALANCE” settings (refer to pages 29-30).
• You can enjoy high-quality analog sound by cutting off analog video signals. Press the AUDIO EX. button on the front panel.
• When using the HDMI connection, signals from the 5.1CH AUDIO OUT jacks can be limited in some cases. If it occurs, set
“HDMI AUDIO” to “OFF” to output the signals (refer to pages 28-29).
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
– 14 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 15
CONNECTIONS
Basic
Audio
Method 1
Good
picture
Method 3
Method 2
Better
picture
Best picture
COMPONENT
VIDEO IN
21-pin Scart jack
R
L
CR/PR
S-VIDEO IN
VIDEO IN
English
Connection to a TV (for Video)
Y
CB/PB
TV
Component
Video Cable
(commercially
available)
Audio Cable
(supplied)
Video Cable
(supplied)
S-Video Cable
(commercially
available)
Euro Audio/Video Cable
(commercially available)
or
DVD
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
A/V EURO
CONNECTOR
COMPONENT
VIDEO OUT
• Method 1 DVD Player + TV with Video input jack
• Method 2 DVD Player + TV with S-Video input terminal
• Method 3 DVD Player + TV with AV1 (21-pin Scart) jack or Component Video input jacks
NOTES:
• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
• S-Video output terminal
The video signals are divided into colour (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input terminal, we recommend connecting it to this unit’s S-Video output terminal
using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator (not included). Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE:
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
– 15 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 16
CONNECTIONS
Connection to a TV with an HDMI Terminal
A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (HighDefinition Multimedia Interface) terminal allows digital transfer of the digital images of DVD-Video and other
sources, DVD-Video, and the multi-channel sound of DVD-Audio.
To HDMI Input
Terminal
HDMI Cable
(commercially available)
A display equipment with an HDMI terminal
C Actual output modes by media (when the connected equipment is compatible with Dolby Digital, DTS,
MPEG and Multi PCM)
Audio Recording Format
Dolby Digital
DVD-Video/ DTS
DVD-RW
MPEG
LPCM
LPCM or PPCM
DVD-Audio (with CPPM) *1
LPCM or PPCM
(without CPPM)
Audio CD/Video CD
MP3/WMA/DivX®
MULTI-CH AREA *2
Super
Audio
2CH AREA *2
CD
CD AREA
AUTO
Dolby Digital
DTS
MPEG
Multi PCM
HDMI AUDIO Setting
MULTI PCM
2CH PCM
2channel PCM
Multi PCM
Multi PCM
2channel PCM
Multi PCM
2channel PCM
Multi PCM
2channel PCM
Multi PCM
Multi PCM
2channel PCM
Multi PCM
Multi PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
OFF
*1 If the connected equipment is not compatible with HDMI ver. 1.0, or for some ver. 1.1 compatible equipment, signals are not output.
*2 Sounds recorded on the MULTI-CH/2CH AREA of Super Audio CDs are not output.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display
equipment (or an AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content
Protection). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV
equipment.
This player supports HDCP. Please read the operating instructions of your display equipment (or AV amplifier) for more
information.
NOTES:
• When using an HDCP-incompatible display equipment, the image will not be viewed properly.
• Some devices that support HDMI can control other devices via the HDMI terminal; however, this player cannot be controlled
by another device via the HDMI terminal.
• The audio signals from the HDMI terminal (including the sampling frequency, the number of channels and bit length) may
be limited depending on the disc or the connected equipment.
• When playing a Super Audio CD with an HDMI connection, audio signals cannot be transferred beyond the CD AREA.
Make an analog connection for this.
• The HDMI AUDIO setting cannot be changed when the connected device is not compatible with HDMI audio, or no device
compatible with HDMI audio is connected to this player.
• Even when the connected device is compatible with HDMI audio, the HDMI AUDIO setting is not possible if the power of the
device is turned off or the HDMI output mode is set to “hdOFF”.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.”
– 16 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 17
PLAYING A DISC
DVD-V DVD-A DVD-RW VCD
CD
MP3 JPEG WMA
• Video and audio signals may be distorted temporarily
when switching to/from the HDMI output mode.
• Use a display equipment with an HDMI terminal.
• Progressive video signal will not be output from the
COMPONENT VIDE OUT during the HDMI output mode.
• You cannot set a resolution which is not compatible on
the connected display equipment.
• You can check the HDMI connection status by pressing
the DISPLAY button during playback with the HDMI
output mode. (Refer to pages 24-25.)
• The HDMI button is inoperative when no HDMI connection is made or the connected HDMI equipment is
turned off.
Super
Audio CD
DivX®
Getting started
•
•
Turn on the power of the TV, amplifier
and any other components which are
connected to the DVD player.
Make sure the TV and audio receiver
(commercially available) are set to the
correct channel.
1 Press the POWER button.
• “P-ON” will appear briefly on the display panel.
2 Press the OPEN/CLOSE button to open disc loading tray.
3 Place the disc in the tray, with the label facing up.
4 Press the PLAY button.
• The tray will close automatically, and playback will start
from the first chapter or track of the disc. If the playback
does not start automatically, press the PLAY button.
• When you play back the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title Menu”.
5 Press the STOP button to stop playback.
AUDIO EX Mode
You can enjoy higher quality audio by stopping the analog
video signals and display.
1 Press the AUDIO EX. button on the front panel to
output audio and HDMI signals only (no analog
video signals will be output, and the display will be
turned off).
• You can press the AUDIO EX. button either during
playback or in stop mode.
• The AUDIO EX. indicator will light up.
• The higher quality sound will be achieved.
NOTES:
• A “prohibited icon” may appear at the topright on the TV screen during operation,
warning that a prohibited operation has
been done to the DVD player or the disc.
• With DVDs that use some titles for playback programme signals, playback may
start from the second title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu or Video CDs with PBC. Refer to the manual
accompanying the disc for details.
• A DVD-RW disc recorded in the VR mode may freeze
momentarily during playback depending on how the playlist
was made and edited (deleted titles, repeated recording).
CANCELLING AND CALLING BACK THE PBC FUNCTION
NOTES:
• In setup menu, the AUDIO EX. button is not available.
• The AUDIO EX mode will be released when you press
the buttons listed below.
OPEN/CLOSE button (on both the remote control and
the front panel), SETUP, POWER or DISPLAY button
(on the remote control), POWER ON/STANDBY or
AUDIO EX. button (on the front panel).
General Features
DVD-V DVD-A
DVD may contain menus to navigate the disc and access special features. Press the appropriate Numeric buttons or use the
Cursor buttons (L / K / B / s) to highlight your selection in the
DVD main menu and press the ENTER button to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
VCD
1 Insert a Video CD.
2 Press the STOP button.
3 Press the Numeric buttons to enter the desired
Disc Menus
track number.
• The PBC function is now cancelled and the playback of
the Video CD will start.
4 To call back the PBC function, press the STOP but-
ton twice, and then press the PLAY button.
• Title menu will appear on the display.
HDMI Setup
1 Press the HDMI button on the front panel to select
the HDMI output mode.
The output mode changes as follows every time
the HDMI button is pressed.
480P/576P
720P
1080i
DVD-V
1 Press the MENU button.
• The DVD main menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
4 Press the Cursor buttons (L / K / B / s) to select an
item, and the ENTER button to confirm selection.
Title Menu
hdOFF
DVD-V DVD-A
• Press the HDMI button once to display the current
HDMI output mode.
• Press the HDMI button appropriate times to display the
desired mode.
• Leave the display showing the desired resolution for 3
seconds, and the current HDMI output mode will be
changed to the selected one.
480P/576P (Default)
: Video output from the HDMI OUT terminal at 480p or 576p.
720P : Video output from the HDMI OUT terminal at 720p.
1080i : Video output from the HDMI OUT terminal at 1080i.
hdOFF: No video output from the HDMI OUT terminal.
1 Press the TOP MENU button.
• The title menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 Press the Cursor buttons (L / K / B / s) to select
an item, and the ENTER button to confirm selection.
• Playback will begin at the selected title.
VCD
1 When playing a Video CD with PBC func-
– 17 –
tion, the title menu will appear automatically.
EN
English
NOTES:
Basic Playback
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 18
PLAYING A DISC
2 Press the Numeric buttons to select the desired
Still / Pause
title.
• Playback will begin at the selected title.
3 Press the RETURN button to go back to the Title
Menu.
CALLING UP A MENU SCREEN DURING PLAYBACK
DVD-V DVD-A DVD-RW VCD
CD
MP3 JPEG WMA
•
Press the MENU button to call up the DVD main menu
(DVD-V).
Press the TOP MENU button to call up the title menu.
• Playback will pause and sound
will be muted.
2 To continue playback, press the PLAY button.
NOTE:
• On DVDs, set “STILL MODE” to “FIELD” on the display
menu if pictures in the pause mode are blurred. (Refer to
page 28.)
• Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
Step by Step Playback
DVD Audio Playback
DVD-V DVD-A DVD-RW
DVD-A
DVD-AUDIO
F
• Playback will pause and sound
will be muted.
TOTAL 2:05:55
2 The disc advances by one frame each time the
All Group Playback
--no indication--
PAUSE button is pressed.
2 Press the PLAY button to begin
3 To exit Step by Step Playback, press the PLAY button.
PLAY
NOTE:
PLAYBACK FROM A DESIRED GROUP
1 During playback or in stop
1/12
mode, press the GROUP button.
2 Press the Numeric buttons to
select a group.
• On DVDs, set “STILL MODE” to “FIELD” on the display menu
if pictures in the pause mode are blurred. (Refer to page 28.)
Resume
DVD-V DVD-A DVD-RW VCD
CD
MP3 JPEG WMA
• The group will be located and
playback will start.
1 During playback, press the
STOP button.
PAGE SELECTION
• Resume message will appear
on the TV screen.
2 Press the PLAY button, play-
1/12
Super
Audio CD
DivX®
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
<Example: DVD>
back will resume from
the point at which playback was stopped.
• To cancel Resume, press the STOP button twice.
+ or – button to select a desired
page number to be displayed.
NOTES:
• Some Video CDs with the PBC function resume playback from the beginning of the track.
• The resume information will be saved even when the
power is switched off.
• For MP3, JPEG or WMA, playback will resume from the
beginning of the current track.
PLAYBACK OF THE BONUS GROUP
Some discs are recorded with the Bonus Group that can be
played back by entering a password. Refer to the disc jackets.
1 In stop mode, press the
GROUP button to open the
group search screen.
2 Press the Numeric buttons to
select a bonus group number.
DivX®
PAUSE button.
ALL GROUP
Some DVD-Audio discs that include still
images feature a selection of images
you can choose from.
1 During playback, press the PAGE
VCD
Only Moving Picture
1 During playback, press the
PLAYBACK OF ALL GROUPS
1 In stop mode, press the MODE
button.
playback.
F
PAUSE button.
NOTE:
• The ALL GROUP screen
appears.
DivX®
1 During playback, press the
DVD-V DVD-A
•
Super
Audio CD
Playing the Disc Recorded in
VR Mode (Video Recording Format)
DVD-AUDIO
BONUS GROUP
Please enter a 4-digit password.
DVD-RW
• The password popup window
appears.
3 Press the Numeric buttons to enter the 4-digit
password.
• When the correct password is entered, playback starts
from the top of the bonus group.
NOTES:
• In some cases the password window is displayed on
the menu screen. Follow the instructions on the screen.
• Once the password is entered, playback will be repeated until the disc is removed from the disc tray.
DVDs recorded in VR mode can have a PLAYLIST assigned
to alter the order or content to be played. If a PLAYLIST has
been created, you can choose the ORIGINAL or PLAYLIST
option.
1 Press the MENU button in stop mode.
• The current setting screen will appear.
• Pressing the MENU button during playback is not valid.
6 PLAYLIST6
2 Press the Cursor buttons (s or B) to select
ORIGINAL or PLAYLIST.
• PLAYLIST will not be displayed when it has not been
made.
• Resume playback will not be possible if you change the
setting.
– 18 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 19
PLAYING A DISC
then press the ENTER button.
2 Press the ZOOM button repeatedly to select the
English
3 Press the Cursor buttons (K or L) to select a title,
required zoom factor: x2, x4 or off.
• Playback will start.
• Only x2 zoom is available on Video CDs, JPEG and
DivX® .
NOTE:
• ORIGINAL: A list of titles which are recorded with a
DVD recorder.
PLAYLIST: A list of titles which is made based on the
ORIGINAL edited list.
Fast Forward / Reverse Search
DVD-V DVD-A DVD-RW VCD
CD
MP3 WMA
x2
x4
3 Use the Cursor buttons (L / K / B / s) to move
Super
Audio CD
the zoomed picture across the screen.
DivX
®
1 During playback, press the FWD g or REV h
button repeatedly to select the required forward or
reverse speed.
• For DVDs, Fast Forward or Reverse Search speed is
different depending on the disc.The approximate speed
is 1 (x2), 2(x8), 3 (x20), 4 (x50) and 5 (x100).
REV
FWD
Button
1
2
3
4
5
1
2
3
4
5
Button
• For Video CDs, Super Audio CDs, Audio CDs, MP3,
WMA and DivX®, Fast Forward or Reverse Search
speed is different depending on the disc. The approximate speed is 1(x2), 2(x8) or 3(x30).
4 To exit Zoom mode, press the ZOOM button.
NOTES:
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
• Playback will pause in the zoom mode on JPEG.
• Navigation screen is not available on JPEG.
• You cannot move the zoomed picture on some JPEG
files.
2 To return to normal playback, press the PLAY button.
NOTES:
• Picture quality of DivX® files in fast reverse is lower
than that in fast forward.
• For some DivX® files, Fast Forward/Reverse Search
may not function.
Slow Forward / Slow Reverse
DVD-V DVD-A DVD-RW
VCD
Title / Chapter Search
DivX®
DVD-V DVD-RW
Only Moving Picture
1 During playback, press the PAUSE button.
2 Press the FWD g or REV h button.
FWD D Button
• Slow motion playback will begin and
sound will be muted.
3 Press the FWD g or REV h
BY USING THE SEARCH MODE BUTTON
1 Press the SEARCH MODE button
repeatedly until the Chapter
Search, or the Title Search
appears during playback.
2 Enter the desired chapter/title
number with the Numeric buttons.
1
button repeatedly to select the
required speed.
2
• Slow Forward or Reverse speed is different depending on the disc.
Approximate speed is 1 (1/16), 2
(1/8), and 3 (1/2).
/2
BY USING THE SKIP BUTTONS H G
3
4 To return to normal playback, press
the PLAY button.
NOTES:
• On DVDs, set “STILL MODE” to “FIELD” on the display
menu if pictures in the pause mode are blurred. (Refer
to page 28.)
• Only Slow Forward is available when playing Video CD
and discs with DivX® files.
Zoom
During playback, press the SKIP G button to move to the
next chapter. Press it repeatedly to skip subsequent chapters. Press the SKIP H button to go back to the beginning
of the current chapter. Press it repeatedly to go to the previous chapter.
• Chapter number will appear briefly on the front panel display.
• If the SKIP H or G button is pressed while the playback
is paused, the playback after skipping to the next chapter
will be also paused.
NOTES:
DVD-V DVD-A DVD-RW
Only Moving Picture
VCD
JPEG
DivX®
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
1 Press the ZOOM button during playback.
• Playback will continue.
– 19 –
• Depending on the disc being played, the Numeric buttons can be used to search for a desired chapter by
entering the chapter number directly. Refer to the manual accompanying the disc.
• The SKIP H and G buttons are not available when
playback is stopped.
• A disc that does not contain chapters within titles, the
SKIP H and G buttons change the titles.
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 20
PLAYING A DISC
Track Search
DVD-A VCD
Repeat
Super
Audio CD
JPEG
CD
WMA
• The REPEAT button is available only during playback.
MP3
DivX®
There are three ways to begin playback on a disc
at a specific track.
REPEAT TITLE / CHAPTER
DVD-V
To activate the Repeat function, press the REPEAT button
during playback.
BY USING THE SEARCH MODE BUTTON
1 Press the SEARCH MODE button.
__/ 15
• The Track Search display
appears.
2 Within 30 seconds, select a desired
track number using the Numeric
buttons.
• For the disc with less than 10 tracks, press the track
number directly.
• For discs with 10 or more but less than 100 tracks, to
play a single-digit track, press 0 first, then the track
number (e.g. for track 3, press 0, 3). To play a doubledigit track, press the track number.
• For discs with 100 or more tracks, to play a single- or a
double-digit track, press 0 first, then the track number
(e.g. for track 3, press 0, 0, 3, and for track 26, press 0,
2, 6). To play a triple-digit track, press the track number.
• Press the CLEAR button to erase the incorrect input.
•
The Repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
DVD-RW
OFF
REPEAT TRACK / GROUP / ALL
VCD
•
:
:
TOTAL
DivX®
1 : 23 : 45
• Playback will start at the specified
time.
• For Time Search, “0” appears
automatically when there is no
need to enter a number. For example, “0:0_:_ _”
appears in the Time Search screen if the total time of
the disc is less than 10 minutes.
• Press the CLEAR button to erase the incorrect input.
ALL
(entire disc repeat)
• The Repeat Track setting will be cleared when moving
to other track.
• Repeat playback does not function during A-B Repeat
playback.
• Repeat playback is not available when playing the
Video CD with PBC function.
DVD-A MP3
Search screen appears on the TV screen.
desired disc time with the
Numeric buttons.
TRACK
(current track repeat)
NOTES:
1 Press the SEARCH MODE button until the Time
2 Within 30 seconds, enter a
CD
The Repeat mode changes as described below every time
you press the button.
OFF
(repeat off)
Super
Audio CD
VCD
CD
Super
Audio CD
To activate the Repeat function, press the REPEAT button
during playback.
Time Search
DVD-V DVD-A DVD-RW
ALL
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B Repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
• “ALL” is not displayed when playing the DVD-RW discs
recorded in Video mode.
BY USING THE SKIP BUTTONS H G
• The SKIP H and G buttons are not available when
playback is stopped.
TITLE
NOTES:
• The +10 button can also bring up the Track Search display except for the disc with less than 10 tracks. For
such a disc, Track Search can be done by just pressing
the track number.
NOTE:
CHAPTER
(repeat off) (current chapter repeat) (current title repeat) (entire disc repeat)
NOTE:
During playback, press the SKIP G button to move to the
next track. Press it repeatedly to skip subsequent tracks.
Press the SKIP H button to go back to the beginning of the
current track. Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the panel display.
• If the SKIP H or G button is pressed while the playback
is paused, the playback will be also paused after skipping
to the next track.
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
OFF
(repeat off)
TRACK
(current track
repeat)
JPEG
WMA
DivX®
GROUP
ALL
(current folder
repeat)
(entire disc
repeat)
NOTES:
• The Repeat Track / Group setting will be cleared when
moving to other track or group.
• For DVD-Audio, ALL repeat is effective only when all
groups are being played back.
NOTE:
• For some DivX® files, Time Search may not function.
– 20 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 21
PLAYING A DISC
DVD-V DVD-A DVD-RW
• While the programme is being played back, the STOP
button works as follows.
• Press the STOP button once and then the PLAY button
again. Playback will restart from the point where the
STOP button was pressed. (Programme continued.)
• Press the STOP button twice and then the PLAY button
again. Playback will restart from the first track in the
usual way. Your programmes will be stored unless
either the disc tray is opened or power is turned off.
• Up to 99 tracks can be entered.
• To erase all tracks in the programme at once, select
ALL CLEAR at the bottom of the list at step 2 .
• If you wish to repeat the current track in the programme, press the REPEAT button repeatedly until
TRACK appears during playback. If you wish to
repeat the entire programme, press the REPEAT button
repeatedly until
ALL appears during playback.
• Refer to page 25 for Programme Playback of MP3,
WMA, and JPEG.
• If eight or more tracks have been set in a programme,
the user can switch the right part of the screen with the
SKIP H or G button.
Super
Audio CD
VCD
CD
DivX®
A-
1 Press the A-B REPEAT button
at your chosen starting point.
•
A- appears briefly on the TV
screen.
2 Press the A-B REPEAT button
again at your chosen end point.
•
A-B appears briefly on the
TV screen, and the repeat
sequence begins.
A-B
3 To exit the sequence, press the
A-B REPEAT button.
NOTES:
• The A-B Repeat section can only
OFF
be set within the current title (for
DVD-Video), or current track (for
DVD-Audio, Video CD, Super
Audio CD, Audio CD and disc with
DivX® files).
• A-B Repeat is not available with
some scenes in DVD.
• To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track or all repeat playback.
• For some DivX® files, A-B Repeat playback may not
function.
Programme Playback
Random Playback
This shuffles the playing order instead of playback in the
original sequence.
DVD-A
1 In stop mode, press the
RANDOM
RANDOM button.
L) to select the desired group to
playback randomly, then press
the ENTER or PLAY button.
This function allows you to programme a playback order in a
desired sequence.
• The group selection screen
appears.
2 Press the Cursor buttons
DVD-AUDIO
1 In stop mode, press the
ENTER
PLAY
CLEAR
1/ 1
RANDOM
RANDOM button.
ALL CLEAR
CD-DA
• The RANDOM screen will appear.
1/ 1
TOTAL
0:45:55
RANDOM PROGRAM
--no indication--
2 Press the PLAY button to start
Random Playback.
PLAY
NOTES:
• If you wish to repeat the current track in the random
selection, press the REPEAT button repeatedly until
TRACK appears during playback. If you wish to repeat
the entire random selection press the REPEAT button
repeatedly until
ALL appears during playback.
• You cannot go back to the previous track during Random Playback.
• Refer to page 25 for Random Playback of MP3, WMA,
and JPEG.
3 Press the Cursor buttons (▲ or ▼) to select a
track, then press the ENTER button.
• Press the CLEAR button to erase the most recently
entered track.
• Press the Cursor button (s) button to go back to the
group selection screen from the track selection screen.
4 Press the PLAY button to start programmed play-
back.
MP3 / JPEG / WMA Playback
Super
Audio CD
CD
MP3
1 In stop mode, press the MODE
CD-DA
TOTAL
ENTER
PLAY
CLEAR
1/ 2
JPEG
WMA
When a CD-R or CD-RW disc with MP3, JPEG or WMA files
is inserted in the DVD player and the MENU button is
pressed, the FILE LIST will appear on the display. The number of tracks is also displayed on the front panel.
1 Press the Cursor buttons (K or L) to select the
PROGRAM
0:03:30
• The PROGRAM screen will
appear.
▼) to select a track, then press
the ENTER button.
CD
0:00:00
TOTAL
• The track selection screen will be displayed.
• It takes approximately 5 seconds untill the track selection screen appears.
2 Press the Cursor buttons (▲ or
ALL
Super
Audio CD
PROGRAM
(▲ or ▼) to select a group, then
press the Cursor button (B) or ENTER button.
button.
ENTER
PLAY
• Random playback will start.
DVD-A
1 In stop mode, press the MODE
button repeatedly until the
PROGRAM screen appears.
ALL
1 0:44:44
2 0:03:26
• The RANDOM screen will appear.
2 Press the Cursor buttons (K or
1/ 1
desired group (folder) or track.
• Press the CLEAR button to erase the most recently
entered track.
3 Press the PLAY button to start programmed play-
back.
– 21 –
• If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose
a track, then press the PLAY or ENTER button.
• To return to the previous screen, press the Cursor
button (s).
EN
English
NOTES:
A-B REPEAT
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 22
PLAYING A DISC
• If a track is selected, press the PLAY or ENTER button.
The selected track and the subsequent tracks will be
played back.
• When selecting the folders:
–Press the Cursor button (B) when you want to go to
the next hierarchy.
–Press the Cursor button ({) button when you want to
go back to the previous hierarchy (except for the top
hierarchy).
• Press the TOP MENU button to return to the first item.
2 Press the STOP button to stop playback.
NOTES:
• Folders are known as groups; files are known as tracks.
• A symbol of “ ” is shown on the top of the group name.
• A symbol of “ ” is shown on the top of MP3 files.
• A symbol of “ ” is shown on the top of JPEG files.
• A symbol of “ ” is shown on the top of WMA files.
• Maximum of 255 folders can be recognised.
• If the track extends beyond the scope of screen, a down
arrow “L” appears, indicating that the user can view
another part on the previous page. The current page
number and the number of total pages are shown on the
right of the down arrow “L”. Use the SKIP H or G
button to view the previous or next page.
• Maximum of 999 files can be recognised.
• Up to 8 hierarchies can be recognised.
• If no MP3, JPEG or WMA files are found in the group, the
group is not displayed.
• The DVD player can reproduce data recorded as per ISO
9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disc on which data is recorded in a
multi-session.
• For more details of recording systems, refer to the
instruction manual for the CD-R / CD-RW drive or the
writing software.
• For MP3 and WMA file recorded in Variable Bit Rate
(VBR), the unit may not display the actual elapsed
time.
This player recommends the use of files recorded at the below
specifications:
Applicable MP3 file
Sampling
frequency
44.1kHz
48kHz
Type
MPEG1
audio layer 3
Remarks
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
• MP3 files recorded at fixed
bit rate of 32 kbps to 320
kbps are recommended.
Information on MP3, JPEG and WMA discs
• This DVD player can play back images and sounds from
data recorded in MP3, JPEG and WMA formats on CD-R
and CD-RW discs.
• A file with an extension of “.mp3 (MP3)” is called an “MP3
file”.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a “JPEG file”.
The DVD player can run an image file conforming to the
Exif specification. Exif is a file format, Exchangeable
Image File format established by Japanese Electronic
Industry Development Association (JEIDA).
• A file with an extension of “.wma (WMA)” is called a
“WMA file”.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)” and “.jpeg (JPEG)” or “.wma (WMA)” will not be
listed in the MP3, JPEG or WMA menu.
• If the file is not recorded in MP3, JPEG or WMA format,
noise may be produced even if the file extension is either
“.mp3 (MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma
(WMA)”.
• The name of group and track can be displayed in up to 25
characters. Unrecognisable characters will be replaced
with asterisks. The ninth and deeper hierarchies cannot
be displayed.
• Unplayable groups or tracks may be displayed depending
on the recording conditions.
• If the TOP MENU button is pressed when FILE LIST is
displayed, the first item will be highlighted.
Kodak Picture CD
The DVD player can also run JPEG files stored on Kodak
Picture CDs. The Picture CD is a service to convert photographs taken by a conventional film camera into digital data
and write the data on a CD. The user can enjoy picture
images on the television set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that deals
with developing service of Kodak Inc.
1 Press the MENU button.
Kodak Picture CD menu
appears.
Remarks
Sampling
frequency
44.1kHz
48kHz
• Those frequencies are
applicable to WMA version
9.
Bit rate
48–192kbps
• Ensure that the copyright
function is set to off when
preparing a WMA disc.
Type
• A prohibition symbol will
appear if the user attempts
to run a non-reproducible
file such as copyright-proWMA version 9 tected.
• Recorded in 5.1 channel
format cannot be played
back.
Picture2
Picture3
• If all menu items cannot be
displayed in the screen
Picture4
Picture5
Picture6
scope, “G ” appears at the
right bottom of the screen,
1/32
indicating that the user can
Current track number /
view remaining items on the
the number of total tracks
next page. “H” appears, it
indicates that the user can view other items on the previous page. The track number of the currently highlighted item and the total tracks are shown at the centre
bottom of the screen.
• If “G” is shown at the right bottom, use the SKIP G
button to view the next page. If “H” is shown at the
left bottom, use the SKIP H button to view the previous page.
• Press the TOP MENU button to get back to the first page.
• It may take some time until all menu items are displayed on the menu screen.
Applicable JPEG file
Remarks
Upper limit:
• A JPEG image that extends
Size of
6300x5100 dots beyond the screen is
image
Lower limit:
reduced so that it will be
32x32 dots
displayed within the screen.
Applicable WMA file
Picture1
2 Press the Cursor buttons (L / K / B / s), select a
desired track to be played, then press the PLAY or
ENTER button.
• If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to the next
one in turn.
3 Press the STOP button, to stop playback.
– 22 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 23
Notes on JPEG and Kodak Picture CD:
• A track is displayed for 5 or 10 seconds and then the next
track is displayed. Refer to page 31 for SLIDE SHOW.
• Every press on the Cursor button (B) will turn the
image clockwise by 90 degrees when an image is displayed. A press on the Cursor button (s) will turn the
image counterclockwise by 90 degrees.
• To change the size of the playback image, press the
MODE button twice. The size change mode appears on
top of the TV screen during playback. Then press the
Cursor buttons (s or B) or ENTER button to switch
between NORMAL (100%) and SMALL (95%).
• Progressive JPEGs (JPEG files saved in the progressive format) will not be played back on this DVD player.
• High resolution JPEG files take longer to be displayed.
• The size change mode may have no effect on some
files (e.g. files with a small picture size).
Notes on WMA:
• The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks. The name of a file can be displayed
in up to 25 characters.
• Maximum of 8 subfolders can be recognised.
• It can also display tag information of WMA 64 characters at maximum.
• A file with an extension of Joliet as Unicode format in
up to 64 characters can be recognised.
• This unit cannot play back copyright protected WMA
files.
•
•
•
•
•
Folders are known as groups; files are known as tracks.
A symbol of
is shown on the top of the group name.
Maximum of 255 folders can be recognised.
Maximum of 999 files can be recognised.
If the track extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user can
view another part on the previous page. The current
page number and the number of total pages are shown
on the left of the down arrow “L”.
• The name of a group and track can be displayed up to 25 characters. Unrecognizable characters will be replaced with asterisks. The ninth and deeper hierarchies cannot be displayed.
• You can play back the disc recorded in multi-session.
• Playback will be paused if the FILE LIST is displayed
during the playback.
• It may take a while for audio and images to be output
after you inserted a disc and pressed the PLAY button.
• When playing back the files recorded in high bit rates,
the images can be interrupted on some occasions.
• Although DivX® logo has been obtained for this player, it
may not be able to play back some data, depending on the
disc characteristics, bit rates, or audio format settings, etc.
• Use the software recognised by DivX®, Inc. when you
make DivX® files.
• When using tools or utilities to make up DivX® files,
read their instruction manual beforehand.
• A DivX® file whose file size exceeds 2GB cannot be
played back.
• If a large-sized DivX® file is selected, it may take a while
to start the playback (over 20 seconds sometimes).
• If DivX® files wrote on CD discs cannot be played back,
rewrite them on a DVD disc and try to play back.
• For more information for DivX®, please visit
http://www.divx.com.
• If you insert a CD-R/RW with DivX® files that are mixed
with MP3, JPEG, or WMA files, the Playback Media
Selection screen will be displayed. Please select Video
and proceed to Step 1.
DivX® Playback
DivX®
This DVD player can play back DVD-R/RW and CD-R/RW
discs recorded in DivX® Format. When a DVD-R/RW or CDR/RW with DivX® files is inserted in the DVD player and the
MENU button is pressed, the FILE LIST will appear. The
number of tracks will be also displayed on the front panel.
1 Press the Cursor buttons (K or L) to select the
desired group (folder) or track.
• To return to the previous screen, press the Cursor button (s).
• If a group (folder) is selected, press the Cursor button
(B) or ENTER button to go on to the track selection
screen. Press the Cursor buttons (K or L) to choose a
track, then press the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button.
The selected track and the subsequent tracks will be
played back.
• When selecting the folders:
B) when you want to go to
–Press the Cursor button (B
the next hierarchy.
–Press the Cursor button ({) when you want to go back
to the previous hierarchy (except for the top hierarchy).
• Press the TOP MENU button to return to the first item.
2 Press the STOP button to stop playback.
NOTES:
• DivX® is a codec (compression/decompression) that
can compress images to a very small amount of data.
The software can compress video data from almost any
sources to the size that can be sent on the Internet
without compromising visual quality of the images.
• A file with an extension of “.avi” or “.divx” is called a DivX® file.
All files with the “.avi” extention are recognised as MPEG 4.
• Files with the extension other than “.avi” and “.divx” will
not be listed on the DivX® menu. However, unplayable
groups or tracks may be displayed, depending on the
recording conditions.
• Even if the file has an extension of either “.avi” or
“.divx”, this player cannot play it back if it is recorded in
the format other than DivX®.
Please select the media to play back.
Video
Audio & Picture
ENTER
• Press the TOP MENU button to call up the Playback
Media Selection screen in stop mode.
• If you select Audio & Picture, instead of Video on the
Playback Media Selection screen, the DVD player can play
back MP3/JPEG/WMA files. Refer to page 21 for details.
This player recommends the use of files recorded at the following specifications:
Applicable DivX® file
Playable
DivX®3.1.1,
Codec of AVI DivX®4.x,
files
DivX®5.1.1
720 x 480
Maximum size @30 fps
of image
720 x 576
@25fps
Remarks
• They are recognised as
MPEG4.
• It is prohibited to record
MP3 sound on a digital
device when the connection
is made digitally.
Sampling
frequency of
audio
8 kHz - 48kHz
Audio type
MPEG1 audio
files recorded at fixed
layer 3 (MP3) • MP3
rate of 32 kbps to 320
MPEG1 audio bit
kbps are recommended.
layer 2
– 23 –
EN
English
PLAYING A DISC
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 24
PLAYING A DISC
Slide Show Mode
VCD
JPEG
You can switch to the Slide Show Mode during playback.
1 Press the MODE button during playback.
• The Slide Show Mode screen will appear.
• The Slide Show Mode cannot be switched when it is
stopped, or from the FILE LIST screen or the Picture
CD menu screen.
2 Press the Cursor buttons (s or B) or ENTER button.
• The Slide Show Mode will change.
CUT IN/OUT: The entire image appears in one time.
FADE IN/OUT: The image appears gradually and then
disappears.
3 Press the MODE button twice to exit.
On-Screen Information
You can check information about the current media by pressing the DISPLAY button on the remote control.
9/49
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show the total
tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
• If you are playing Super Audio CD, press the DISPLAY
button again to show the area currently being played.
3 Press the DISPLAY button again.
• During Programme or Random Playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode.
4 Press the DISPLAY button again to remove the
display.
MP3
• The name of the file currently
played will be displayed.
<Example: MP3>
2 Press the DISPLAY button again to show the cur-
rent title.
• The elapsed and remaining playing time of the current
title will be displayed.
3 Press the DISPLAY button again to show the bit
rate and the current repeat setting.
IIII
T
L0
IIII
T
ORG
2 Press the DISPLAY button
1/36 0:01:15
T
4 Press the DISPLAY button again to remove the
display.
WMA
display.
1 Press the DISPLAY button
TRACK 01
during playback.
• The name of the file currently
played will be displayed.
2 Press the DISPLAY button
again.
TITLE NAME
• Title name based on tag information currently played will be
displayed.
DVD-A
1 Press the DISPLAY button during playback to
3 Press the DISPLAY button
show current track.
• The elapsed and remaining playing time of the current
track will be displayed.
again.
group.
• The elapsed and remaining playing time of the current
group will be displayed.
3 Press the DISPLAY button
IIII
T
L0
• If you are playing a dual layered disc, the layer number
will also be displayed (L0: Layer 0 is played. L1: Layer 1
is played).
4 Press the DISPLAY button again.
• During all group, programme or random playback, each
playback status will be displayed when you press the
DISPLAY button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode.
5 Press the DISPLAY button again to remove the
ARTIST NAME
• Artist name based on tag
information currently played
will be displayed.
2 Press the DISPLAY button again to show current
display.
TR
again to show the track number, the elapsed time (MP3
and DivX®), the repeat status,
and the playback status at the top of the screen.
3 Press the DISPLAY button again.
• During Programme or Random Playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode.
4 Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode.
5 Press the DISPLAY button again to remove the
again to show the bit rate
and the current repeat setting.
DivX®
TRACK 01
during playback.
• The elapsed and remaining
playing time of the current chapter will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed (L0: Layer 0 is
played. L1: Layer 1 is played).
• If you are playing a DVD-RW
with setting the PLAYLIST, the
following will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
JPEG
1 Press the DISPLAY button
0:00:00 -0:00:00
during playback to show the
current chapter.
CD
1 Press the DISPLAY button during playback, the
DVD-V DVD-RW
1 Press the DISPLAY button
Super
Audio CD
4 Press the DISPLAY button
TR 1/36 0:01:15
again to show the track
number, the elapsed time,
the repeat status, and the
playback status at the top of the screen.
5 Press the DISPLAY button again.
T
• During Programme or Random Playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode.
6 Press the DISPLAY button again to remove the
display.
NOTE:
– 24 –
• If the file does not contain tag information, “NOT AVAILABLE” will be displayed.
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 25
Hints for repeat indications
• C • T • G • A • A B-
Random Playback
indicates Chapter repeat
indicates Title or Track repeat
indicates Group (folder) repeat
indicates Disc repeat
indicates A-B repeat
MP3
JPEG
WMA
1 In stop mode, press the RANDOM button.
• The RANDOM screen will appear.
2 Press the PLAY button to start
RANDOM
DISC TITLE
Hints for HDMI indications
Random Playback.
• The displayed HDMI status are
as follows:
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
1. Information for image outMAX CHANNEL : 2ch
put/Resolution of image
2. Sound output format
3. Maximum number of audio channels that can be
accepted by the connected equipment
• For a disc containing mixed MP3,
JPEG and WMA files, Random
Playback of those files will be
performed.
This feature allows you to programme
an MP3, JPEG or WMA disc to play in
a desired sequence.
1 In stop mode, press the MODE
button.
JPEG
DVD-V DVD-RW DivX®
WMA
The DVD player allows you to select a language during DVD
disc playback if multiple languages are available.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
desired language.
PROGRAM
FOLDER
MP3
WMA
JPEG
ENTER
PLAY
CLEAR
PLAY
Audio Language
Programme Playback
MP3
RANDOM PROGRAM
--no indication --
MP3 - COLECTION
ALBUM01
ALBUM02
ALBUM03
ALBUM04
ALBUM05
ALBUM06
ALBUM07
1. ENG
DolbyD 3/2.1ch 48k/3
HELLO
1/ 3
1/ 1
ALBUM01
• The PROGRAM screen will
appear.
2. FRE
DolbyD 3/2.1ch 48k/3
2 Press the Cursor buttons (K
or L) to select a group, then
press the Cursor button (B) or
ENTER button.
• A track selection screen appears.
PROGRAM
FOLDER
MP3
WMA
JPEG
ENTER
PLAY
CLEAR
ALBUM01
TRACK11
TRACK08
TRACK09
TRACK10
TRACK11
TRACK12
TRACK13
TRACK14
Bon jour
2/ 3
1/ 1
TRACK11
3 Press the Cursor buttons (K
or L) to select a track, then
press the ENTER button to
save it in a programme.
3. JPN
DolbyD 3/2.1ch 48k/3
PROGRAM
FOLDER
MP3
WMA
JPEG
ALBUM05
TRACK48
TRACK49
TRACK50
TRACK51
TRACK52
TRACK53
TRACK54
TRACK11
TRACK81
TRACK31
TRACK22
TRACK03
TRACK53
TRACK25
H 2/ 3 G
• Press the CLEAR button to erase
the most recently entered track.
• The programmed track is displayed in the right-hand screen.
• If the entire programme cannot
be displayed at once on the screen, “L” appears to go
to the next page.
• Pressing the Cursor button (s) will show a list of folders that belong to the one-level upper hierarchy than
the currently selected folder.
ENTER
PLAY
CLEAR
2/ 3
NOTES:
TRACK51
4 Press the PLAY button to start programmed play-
back.
NOTES:
• To erase all tracks in the programme at once, select
ALL CLEAR at the bottom of the list at step 2 .
• During the display of the PROGRAM screen, press the
RETURN button, and the stop screen will show up with
the programme contents in memory.
• Press the STOP button once and then the PLAY button
again. Playback will restart from the beginning of the
track played previously. (Programme continued.)
• Press the STOP button twice and then the PLAY button
again. Playback will restart from the first track in the
usual way. Your programmes will be stored unless
either the disc tray is opened or power is turned off.
• Up to 99 tracks can be set in a programme.
• If an inserted disc contains mixed MP3, JPEG and
WMA files, Programme function allows 99 tracks in
combination of MP3, JPEG and WMA files.
• If eight or more tracks have been set in a programme,
the user can switch the right part of the screen with the
SKIP H or G button.
– 25 –
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Some discs allow Audio Language setting on the disc
menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• For discs with DivX® files, the screen only displays MP3
audio or MPEG1 audio layer 2. (MPEG1 audio layer 2 will be
displayed as “MP2”.) Other audio sounds will be displayed
as “---”.
• Pressing the AUDIO button may not work on some
DVDs with multiple audio languages (e.g. DVDs which
allow Audio Language setting on the disc menu).
• If you choose a language that has a 3-letter language
code, the code will be displayed every time you change
the Audio Language setting. If you choose any other languages, “---” will be displayed instead. (Refer to page 32.)
• If the disc has no audio language, ‘NOT AVAILABLE’ will
be displayed.
• For DVD-RW (VR mode), pressing the AUDIO button
cycles the sound mode through MAIN, SUB and MAIN
+ SUB.
• For DVD-RW (VR mode), discs recorded in double
sound (two languages) can be played back in sound
mode of MAIN, SUB or MAIN + SUB.
• With the digital connection, the audio language of DVDRW (VR mode) with double sound will not be affected
even though you can change the setting on the display.
EN
English
PLAYING A DISC
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 26
PLAYING A DISC
Subtitle Language
VCD
CD
DVD-V DivX
1 Press the AUDIO button repeatedly during play-
The DVD player allows you to select a language for subtitle
during DVD disc playback if multiple languages are available.
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
STEREO - both right and left channels are active (stereo)
L-ch
- only left channel is active
R-ch
- only right channel is active
®
back to select between STEREO, L-ch or R-ch.
your desired subtitle language.
STEREO
Both right and left channels
are active (stereo).
• The selected language will be displayed on the display
bar at the top of the screen.
• Press the Cursor buttons (s or B) to turn ON or OFF
subtitles during playback.
L-ch
Only the left channel
is active.
1.ENG/6
Subtitle 1
R-ch
Only the right channel
is active.
2.FRE/6
Subtitle 2
NOTES:
• Stereo sound mode will not be changed when playing
DTS CD.
• Stereo sound mode cannot be changed during the playback of Super Audio CD. (It may be possible to switch
stereo sound mode when playing back discs including a
CD AREA.)
OFF
OFF
3 To turn off subtitles, press the SUBTITLE button
Super
Audio CD
repeatedly until OFF appears.
NOTES:
• Some discs allow Subtitle Language setting on the disc
menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• Pressing the SUBTITLE button may not work on some
DVDs with multiple subtitle languages (e.g. DVDs which
allow Subtitle Language setting on the disc menu).
• If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have
subtitles in that language.
• If you choose a language that has a 3-letter language
code, the code will be displayed every time you change
the Subtitle Language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to page 32.)
• If the disc has no subtitle language, ‘NOT AVAILABLE’
will be displayed.
• For discs with DivX® files, the screen only displays the
number of subtitle languages.
1 Press the SOUND MODE button repeatedly to
select MULTI-CH AREA, CD AREA or 2CH AREA.
MULTI-CH AREA: Playback in multi channel format. The
number of channels depends on the
played disc.
CD AREA: Playback in the sound quality equivalent to
Audio CDs.
2CH AREA: Playback in higher quality than that of Audio
CD sound.
MULTI-CH AREA
MULTI-CH AREA is selected
(Default: when the ANALOG AUDIO
is set to 5.1CH)
CD AREA
CD AREA is selected
2CH AREA
Sound Mode / Stereo Sound Mode
2CH AREA is selected
(Default: when the ANALOG AUDIO
is set to 2.0CH)
DVD-A
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
NOTES:
• Virtual Surround setting is not available for Super Audio
CDs. (If a disc contains the CD AREA, Virtual Surround
setting is available only for the CD AREA.)
• Some playback options may not be available. They will
be skipped.
desired sound.
NOTE:
• When selecting a multi-channel sound, it may not be
mixed down in some cases even though the Audio
Setting is 2 channel.
Camera Angle
1.LPCM 3/2.1ch 96k/2
2.PPCM 2/0ch 96k/2
DVD-V
Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the Camera Angle
when the mark (
) appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
– 26 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 27
PLAYING A DISC
1/8
MODE button repeatedly during playback and the
Cursor buttons (s or B) to choose a desired
marker, then pressing the ENTER button.
NOTES:
2/8
Angle 2
• Opening the disc tray, turning off the power or selecting
AC at step 2 and pressing the ENTER button will
erase all markers.
• To clear a marker, use the Cursor buttons (s or B),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
• You can mark up to 10 points.
8/8
Angle 8
5 Press the SEARCH MODE or RETURN button to
exit.
NOTE:
• If the “ANGLE ICON” setting is “OFF” in the display menu,
the mark (
) will not appear. (Refer to page 31.)
Virtual Surround
DVD-V DVD-A DVD-RW
Marker Setup Screen
DVD-V DVD-A DVD-RW
VCD
Super
Audio CD
CD
Use markers to memorise your
favourite places on a disc.
1 Press the SEARCH MODE but-
VCD
MP3
CD
WMA
You can enjoy stereophonic virtual
space through your existing 2 channel
stereo system.
1 Press the MODE button during
playback.
ton repeatedly until the display
screen and markers appear
during playback.
2 Press the Cursor buttons (s or B) to select 1, 2, 3,
4, 5, 6, 7, 8, 9, or 10 and ensure that “_ : _ _ : _ _”
appears on the display.
3 When the disc reaches the desired point, press the
ENTER button.
2 Press the Cursor buttons (s
or B) or ENTER button to set it 1(Natural effect),
2(Emphasised effect) or OFF.
3 Press the MODE or RETURN button to exit.
NOTES:
• When Virtual Surround is set to 1 or 2, audio signals
are output as 2 channel sound.
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than “STEREO”. (for Audio
CDs or Video CDs playback only)
• The setting will kept OFF when the player is turned off.
• The title or track and elapsed playing time will appear
on the TV screen.
DVD SETUP
In setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode (refer to pages 27-31) are available.
QUICK mode consists of the setting menus often needed, and you can make all settings required in CUSTOM
mode. You can make the settings of the items with QUICK mark in QUICK mode.
When you make some settings, the setup menu will close and the modified settings will be effective if the
HDMI cable is connected/disconnected, or the connected equipment is turned on/off.
Language Setting
PLAYER MENU (Default: ENGLISH) QUICK
• Sets the language for the on-screen display.
5 Press the Cursor buttons (K or L) to select a
Language options are not available with some discs.
1 Press the SETUP button in stop
mode.
2 Press the Cursor buttons (s or
B) to select CUSTOM, then
press the ENTER button.
setting, then press the ENTER button.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press 4-digit number to enter the code
for the desired language. (Refer to the Language Code
List on page 32.)
• Only the languages supported by the disc can be
selected.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
ENGLISH
ENGLISH
ENGLISH
• The CUSTOM mode will appear.
3 Press the Cursor buttons (s or
B) to select LANGUAGE, then press the ENTER
button to confirm.
4 Press the Cursor buttons (K or L) to select the
below items, then press the
ENTER button.
AUDIO (Default: ENGLISH)
• Sets the audio language.
SUBTITLE (Default: ENGLISH)
6 Press the SETUP button to exit.
NOTE:
• Language Setting for AUDIO and SUBTITLE is not
available with some discs. Then use the AUDIO and
SUBTITLE buttons. Details are on pages 25-26.
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
• Sets the subtitle language.
DISC MENU (Default: ENGLISH)
• Sets the language for DVD menu.
– 27 –
EN
English
4 To return to the marker later, press the SEARCH
Angle 1
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 28
DVD SETUP
PROGRESSIVE MODE
(Default: AUTO 1)
Display Setting
DISPLAY
PROGRESSIVE MODE
You can change certain aspects of the DVD display screens,
and various display mode settings.
1 Press the SETUP button in
• Press the Cursor buttons (K or
L) to select a mode for the progressive scan output, then press
the ENTER button.
• AUTO 1: mode suitable for
images on the film material.
• AUTO 2: mode for images on the material of 30-frame
film.
• VIDEO 1: mode for normal video material.
• VIDEO 2: mode for video material with less movements.
• VIDEO 3: mode for video material with many movements.
AUTO 1
AUTO 2
VIDEO 1
VIDEO 2
VIDEO 3
stop mode.
2 Press the Cursor buttons (s
or B) to select CUSTOM, then
press the ENTER button.
• The CUSTOM mode will appear.
3 Press the Cursor buttons (s
DISPLAY
TV ASPECT
STILL MODE
VIDEO OUT
PROGRESSIVE MODE
FORMAT
RGB RANGE
16:9 WIDE
AUTO
SCART
AUTO 1
RGB
NORMAL
or B) to select DISPLAY, then press the ENTER
button to confirm.
4 Press the Cursor buttons (K or L) to select the below items, then press the ENTER button.
TV ASPECT (Default: 16:9 WIDE) QUICK
• Press the Cursor buttons (K or
L) for an item selection, then
press the ENTER button.
• Select 16:9 WIDE if a widescreen TV is connected to the
DVD player.
• Select 4:3 LETTER BOX for a
black bars appears on top and bottom of the screen.
• Select 4:3 PAN & SCAN for a full height picture with both
sides trimmed.
• Select 16:9 SQUEEZE if a wide-screen TV is connected
to the DVD player and you want to maintain the original
source aspect of 4:3. However, when playing back discs
recorded on 16:9, images will be output as 16:9 WIDE.
FORMAT (Default: RGB)
• Select an HDMI output mode
between YCbCr and RGB.
• To change this setting, connect
the player to an equipment compatible with YCbCr using an
HDMI cable, and output video
signals from the HDMI OUT terminal. The setting is
fixed to RGB and cannot be changed if the connected
equipment is not compatible with YCbCr. This setting
also cannot be changed when no video signal is output
from the HDMI OUT terminal.
DISPLAY
TV ASPECT
STILL MODE
VIDEO OUT
PROGRESSIVE MODE
FORMAT
RGB RANGE
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
16:9 SQUEEZE
RGB RANGE
(Default: NORMAL)
TV ASPECT
STILL MODE
VIDEO OUT
PROGRESSIVE MODE
FORMAT
RGB RANGE
DISPLAY
STILL MODE
AUTO
FIELD
FRAME
NOTE:
• An individual picture on TV screen is called as “frame”,
which consists of two separate images called as “field”.
Some pictures may be blurred at the AUTO setting in
the still mode due to their data characteristics.
VIDEO OUT (Default: SCART)
• Press the Cursor buttons (K or
L) for an item selection (SCART,
COMPONENT INTERLACE or
COMPONENT PROGRESSIVE), then press the ENTER
button.
• This setting will be effective
when you exit the setup screen by pressing the SETUP
button.
• When VIDEO OUT is COMPONENT PROGRESSIVE,
“P.SCAN” appears on the DVD player’s panel display
after you exited the setup screen.
• This setting is fixed to SCART or COMPONENT
INTERLACE during the HDMI output mode. Set the
HDMI mode to hdOFF or remove the HDMI cable to
change the setting.
• When changing the VIDEO OUT setting, connect to a
VIDEO jack or an S-VIDEO terminal on the TV. If the
setting is changed, for example, to SCART while the
Component Video jacks is used to connect to the TV, a
distorted video signal may be output.
• Refer to page 12 for more details.
DISPLAY
VIDEO OUT
SCART
COMPONENT INTERLACE
COMPONENT PROGRESSIVE
DISPLAY
• Select a HDMI picture mode
between NORMAL and
ENHANCED.
• Select ENHANCED if the blackwhite contrast is not clear.
• This setting is effective only for the HDMI RGB output.
• This setting cannot be changed when no RGB signal is
output from the HDMI OUT terminal.
STILL MODE (Default: AUTO)
• Press the Cursor buttons (K or
L) for an item selection (AUTO,
FIELD, or FRAME), then press
the ENTER button.
• This adjusts the resolution of
pictures in the still (PAUSE)
mode.
• If you select AUTO, automatically select the best resolution setting (FRAME or FIELD) based on the data
characteristics of the pictures.
• If you select FIELD, pictures in the still mode will be
stabilized although they will be coarse due to a little
amount of data.
• If you select FRAME, pictures in the still mode will be
highly defined although they will be blurred due to output of two fields at the same time.
16:9 WIDE
AUTO
SCART
AUTO 1
RGB
NORMAL
16:9 WIDE
AUTO
SCART
AUTO 1
RGB
NORMAL
5 Press the SETUP button to exit.
• Be sure to press the SETUP button, or the setting will
not work.
Audio Setting
Choose the appropriate Audio Setting for your equipment as
it only affects during the playback of DVD discs of the DVD
player.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUS-
TOM, then press the ENTER button.
• The CUSTOM mode will appear.
3 Press the Cursor buttons (s or
B) to select AUDIO, then the
ENTER button to confirm.
4 Press the Cursor buttons (K or
L) to select the below items,
then press the ENTER button.
DRC (Dynamic Range Control)
(Default: ON)
• To compress the range of sound
volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
DOWN SAMPLING (Default: ON)
– 28 –
• Set to ON when outputting in
48kHz (or 44.1kHz).
• This function is available only on
digital outputting of a disc recorded in over 96kHz (or 88.2kHz).
• This function is not effective for
the HDMI sound output.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 29
• The sound of DVD-Audio which exceeds 96kHz(or
88.2kHz) will be output as 96kHz (or 88.2kHz) even if
DOWN SAMPLING is set to OFF.
2CH PCM:
2 channel signals are output from the HDMI OUT
terminal.
Suitable for monitors or projectors compatible
with HDMI 2CH.
OFF: No audio signals are output from the HDMI OUT
terminal.
To use the 5.1CH AUDIO OUT jacks.
When playing disc with copyright protection
• The sound will be down-sampled at 48kHz (or
44.1kHz), even if you set to OFF.
DOLBY DIGITAL (Default: BITSTREAM) QUICK
• Set to BITSTREAM when the
player is connected to a Dolby
Digital decoder.
• This function is effective only for
the COAXIAL and OPTICAL connections.
• When HDMI AUDIO is set to
AUTO, this setting is fixed and cannot be changed in
some cases.
BITSTREAM: Output by Dolby Digital.
PCM: Convert Dolby Digital to PCM.
ANALOG AUDIO (Default: 2.0CH)
• This setting may not be
changed depending on the
HDMI connection. Set HDMI
AUDIO to OFF if it occurs.
2.0CH: Output 2ch sound from
the 5.1CH AUDIO OUT
jacks.
5.1CH: Output multi channel sound from the 5.1CH
AUDIO OUT jacks.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
5 Press the SETUP button to exit.
DTS (Default: BITSTREAM) QUICK
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
• This function is effective only for
the COAXIAL and OPTICAL connections.
• When HDMI AUDIO is set to
AUTO, this setting is fixed and
cannot be changed in some cases.
BITSTREAM: Output DTS sound.
PCM: Convert DTS sound to PCM.
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
Speaker Setting for ANALOG AUDIO
When 5.1CH is selected for ANALOG AUDIO, some speaker
settings will be required.
• During the HDMI output mode, any of the Speaker Setting
is ineffective.
1 Press the Cursor buttons (K or L) to select
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
5.1CH, then press the ENTER button.
2 Press the Cursor buttons (K or
L) to select the below items,
then press the ENTER button.
AUDIO
5.1CH
SPEAKER SIZE
DELAY TIME
BALANCE
MPEG (Default: PCM) QUICK
• Set to BITSTREAM when the unit
is connected to an MPEG
decoder.
• This function is effective only for
the COAXIAL and OPTICAL connections.
• When HDMI AUDIO is set to AUTO, this setting is fixed
and cannot be changed in some cases.
BITSTREAM: Output MPEG sound.
PCM: Convert MPEG sound to PCM.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
SPEAKER SIZE
• Press the Cursor buttons (K or L)
to select the speaker to set.
• Press ENTER until the desired
speaker size appears.
FRONT (L/R)
CENTER
SUB WOOFER
SURROUND (L/R)
LARGE
LARGE
ON
LARGE
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: LARGE)
NOTE:
LARGE:Select this when the connected speaker is
capable of playing back sounds of 100Hz or
less.
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or
less.
OFF:
Select this when it is not connected. (It cannot
be set OFF on the FRONT speaker.)
• Audio Settings for DOLBY DIGITAL, DTS and MPEG
may be automatically changed to BITSTREAM or PCM
in some cases when using the HDMI connection.
HDMI AUDIO (Default: AUTO)
• Select the number of channels
for the HDMI audio output.
• Refer to the table on page 16 for
the actual output settings.
• Connect appropriate external
equipment for each setting.
• This setting cannot be changed when no equipment
compatible with HDMI audio is connected to the HDMI
OUT terminal.
• Even if an equipment compatible with HDMI audio is
connected, this setting cannot be changed when the
equipment is turned off or the HDMI output mode is set
to hdOFF.
AUTO: The output channel number is selected automatically from Bitstream, Multi-channel or 2-channel.
Suitable for monitors or amplifiers compatible
with HDMI bitstream.
MULTI PCM:
Multi-channel or 2-channel signals are output
from the HDMI OUT terminal.
Suitable for monitors or amplifiers incompatible
with HDMI bitstream.
AUDIO
SPEAKER SIZE
AUDIO
HDMI AUDIO
AUTO
MULTI PCM
2CH PCM
OFF
SUB WOOFER (Default: ON)
ON:
OFF:
Select this when SUB WOOFER is connected.
Select this when it is not connected.
NOTES:
– 29 –
• OFF is not available for SUB WOOFER when SMALL is
selected for FRONT(L/R).
• SMALL is not available for FRONT(L/R) when OFF is
selected for SUB WOOFER.
• During DVD-Audio playback, the sound may not come
out as setting due to restrictions in the disc or the player.
• During DVD-Audio playback, the Low Pass Filter (which
filters out the sound with the sound wave frequency
over 100Hz) of the SUB WOOFER will be turned off
with the following speaker setting. Otherwise, the Low
Pass Filter will be turned on.
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE
EN
English
DVD SETUP
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 30
DVD SETUP
DELAY TIME
To enjoy 5.1-channel surround sound, the distance between
the listening position and all speakers (excluding the SUB
WOOFER) should ideally be set at a uniform distance on a
circle. If the speakers cannot be set at this manner, the ideal
listening position can be virtually created with the DELAY
TIME setting.
Use the Cursor buttons (K or L) to select the setting item,
then press the ENTER button.
• Press the Cursor buttons (K or L)
to select the speaker to set, then
press the ENTER button.
AUDIO
DELAY TIME
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
METERS
3.0m
3.0m
3.0m
ON
Parental Control
Parental Control limits playback of discs with unsuitable audience ratings. A 4-digit password established by the user will unlock the Parental Lock.
This feature allows you to prevent your children from playing discs
with objectionable scenes.
PARENTAL LEVEL
Parental Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select
CUSTOM, then press the ENTER button.
3 Press the Cursor buttons (s or
DISTANCE (Default: METERS)
METERS(when the ENTER button is pressed):
The unit of distance is set to meters (“m”).
FEET(when the ENTER button is pressed):
The unit of distance is set to feet (“ft”).
FRONT(L/R), CENTER, SURROUND (Default: 3.0m)
FRONT(L/R):
The distance can be set within the
range of 0.0 to 18.0m.
CENTER, SURROUND:
These depend on the setting value
of FRONT(L/R).
B) to select PARENTAL, then
press the ENTER button.
4 Press the Numeric buttons to
enter your 4-digit password.
• When doing this for the first time,
enter any 4-digit number by
pressing the Numeric buttons
(except for 4737), then press the
ENTER button. That number will
be used as the password from the
second time onward. Record your
password in case you forget it.
AUDIO
DELAY TIME
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
METERS
3.0m
3.0m
3.0m
ON
PARENTAL
PASSWORD
Please enter a 4-digit password.
PARENTAL
PARENTAL LEVEL ALL
PASSWORD CHANGE
5 Press the Cursor buttons
AUDIO
FRONT(L/R)
3.3m
3.0m
2.7m
2.4m
2.1m
1.8m
1.5m
NOTES:
• It is not possible to adjust this item if CENTER and
SURROUND have been set to OFF in the SPEAKER
SIZE setting.
• When DEFAULT is selected and the ENTER button is
pressed, all the items are restored to their factory
default settings.
BALANCE
When the channel level differs from each speaker, the adjustment can be made in the unit of dB (-12dB to 0dB).
TEST:
• Press the Cursor buttons (K or L)
to select TEST, then press the
ENTER button.
The test tone will output from each
speaker in turn.
AUDIO
BALANCE
TEST
FRONT (L)
CENTER
FRONT (R)
SUB WOOFER
SURROUND (R)
SURROUND (L)
CHANNEL LEVEL:
• Press the Cursor buttons (K or L)
to select the speaker to set, then
press the ENTER button.
• Press the Cursor buttons (K or
L) to select the desired level for
each speaker, then press the
ENTER button.
NOTES:
0dB
0dB
0dB
0dB
0dB
0dB
AUDIO
TEST
FRONT (L)
CENTER
FRONT (R)
SURROUND (R)
SURROUND (L)
(K or L) to select PARENTAL
LEVEL, then press the ENTER
button.
6 Press the Cursor buttons
(K or L) to select the desired
level, then press the ENTER button.
7 Press the SETUP button to exit.
PARENTAL
PARENTAL LEVEL
ALL
8
7
6
5
4
3
NOTE:
• This function may not work on some DVDs. Be sure if
the ratings operate in the way you have set.
To Change the Password:
1) Follow the steps 1 to 4 above.
2) Press the Cursor buttons (K or L) to select “PASSWORD
CHANGE”, then press the ENTER button.
3) Enter a new 4-digit password, then press the ENTER
button.
4) Press the SETUP button to exit.
IF YOU FORGET THE PASSWORD
1 Press 4, 7, 3, 7 at step 4 .
• The original password will be cleared and the Parental
Level will be set to “ALL”. Enter a new 4-digit password,
then press the ENTER button.
2 Repeat steps 5 to 7 to re-establish the Parental
Level.
0dB
0dB
0dB
0dB
0dB
CONTROL LEVELS
AUDIO
FRONT (L)
0dB
-1dB
-2dB
-3dB
-4dB
-5dB
-6dB
• While the test tone is being output, the channel balance adjustment cannot be made.
• When TEST is selected, no test tone will be output
from SUB WOOFER.
• It is not possible to adjust this item for the speaker that
has been set to OFF in SPEAKER SIZE setting.
• ALL
Parental Lock is cancelled.
• Level 8
DVD softwares of any grades (adult/general/children)
can be played back.
• Levels 7 to 2
Only DVD softwares intended for general use and children can be played back.
• Level 1
Only DVD softwares intended for children can be
played back. DVD softwares intended for adult and general use will be prohibited.
3 Press the SETUP button to exit.
– 30 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:27 PM
Page 31
Reset to the Default Settings (except for
Others Setting
This function allows you to adjust Angle Icon availability, Auto
Power Off, brightness of the player’s display panel, Slide
Show Mode and to obtain DivX® registration code.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUSTOM,
then press ENTER.
• The CUSTOM mode will appear.
3 Press the Cursor buttons (s or
This allows you to return all selections of SETUP (except for
PARENTAL and VIDEO OUT) to their default settings.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select INIT.,
then press the ENTER button.
3 Press the Cursor buttons (K or L) to select YES,
OTHERS
B) to select OTHERS, then
press the ENTER button to confirm.
4 Press the Cursor buttons (K or
L) to select an item, then press ENTER.
ANGLE ICON (Default: ON)
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
• Press the ENTER button repeatedly to turn ANGLE ICON ON or
OFF.
PARENTAL and VIDEO OUT)
then press the ENTER button.
ON
ON
BRIGHT
5sec
4 Press the SETUP button to exit.
NOTE:
• If you like to cancel initializing, select NO at step 3 .
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
ON
ON
BRIGHT
5sec
AUTO POWER OFF (Default: ON)
• Press the ENTER button repeatedly to turn AUTO POWER OFF
ON or OFF.
• It will turn the DVD player off automatically after 30 minutes of no
use.
PANEL DISPLAY
(Default: BRIGHT)
• Press the Cursor buttons (K or
L) to select an item among
BRIGHT, DIMMER and AUTO,
then press the ENTER button.
• When AUTO is selected, the display dims only during playback.
OTHERS
ANGLE ICON
AUTO POWER OFF
PANEL DISPLAY
SLIDE SHOW
DivX(R) VOD
ON
ON
BRIGHT
5sec
OTHERS
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
SLIDE SHOW (Default: 5sec)
• This adjusts the playback speed of
the JPEG SLIDE SHOW.
• Press the Cursor buttons (K or L)
to select between 5 sec and 10
sec, then press the ENTER button.
OTHERS
SLIDE SHOW
5sec
10sec
DivX(R) VOD
• This player allows you to use the
DivX® Video-On-Demand (VOD)
services. You can play back the
files purchased or rental from
the VOD services. You need to
have a registration code to purchase or rental VOD files. Please visit
www.divx.com/vod for more details.
OTHERS
DivX(R) VOD
Your registration code is:
12345678
To learn more visit
www.divx.com/vod
NOTES:
• You cannot play back the DivX® VOD files obtained with
different registration codes on this player.
• You cannot play back the DivX® VOD files, of which
rental period has been expired. In such case, press the
MENU button and select other files that can be played
back.
• Some DivX® VOD files are restricted with the limited
playable times (you cannot play them back beyond the
limit). If your DivX® VOD file has such limit, the playback
confirmation screen will appear. Use the Cursor button
(s or B) to select YES if you want to play back the file,
or to select NO if you do not wish to play it back. Then,
press the ENTER button to confirm the selection.
• Please send your inquiries regarding the VOD files to
DivX®, Inc.
5 Press the SETUP button to exit.
– 31 –
EN
English
DVD SETUP
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:28 PM
Page 32
DVD SETUP
Language Code List
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
Language
Code
Language
Code
Language
Code
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio or Subtitle Language
setting on pages 25-26. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player does not perform properly while referring to the relevant sections and to “TROUBLESHOOTING GUIDE” in
this User Guide, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Centre for
inspection and cleaning of the laser optical pickup unit.
Disc Handling
•
•
•
•
Use discs with the following logos on them.
Handle the discs carefully so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on this player. Do not attempt to play such discs, as they may damage the player.
DIGITAL VIDEO
– 32 –
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:28 PM
Page 33
If the DVD player does not perform properly when operated as instructed in this User Guide, check the player, consulting the
following checklist.
Problem
Solution
No power
–Check if the AC power cord is properly connected.
–Unplug the AC power cord, and wait for 5-10 seconds and then plug
it in again.
No sound or picture
–Check if the TV is switched on.
–Check the video and HDMI connection.
–Check the VIDEO/AUDIO cable connections to the TV.
(Refer to page 15 for Connection to a TV (for video).)
–When signals are output from the HDMI OUT terminal, progressive
signals are not output from the COMPONENT VIDEO OUT jacks.
Press the HDMI button on the front panel to set the HDMI output
mode to “hdOFF”.
–Check if the AUDIO EX is set to “ON”. If it is the case, set it to
“OFF”.
–Check if the VIDEO OUT mode is set correctly. See pages 12 and
28.
Distorted picture
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the player directly to the TV.
–Check if the VIDEO OUT mode is set correctly. See pages 12 and
28.
Completely distorted picture or
–Connect the player directly to the TV.
black/white picture with DVD
–Make sure the disc is compatible with the player.
No sound or distorted sound
–Adjust the volume.
–Check if the speakers are connected correctly.
–HDMI sound is not output when HDMI AUDIO is set to “OFF”.
No audio at digital output
–Check the digital connections.
–Check the Audio Setting.
–Digital signals cannot be output with Super Audio CDs. Use analog
connections.
–Area of Super Audio CD being played (MULTI-CH/2CH/CD) does
not match amplifier connections.
No image from the HDMI connection
–Check the HDMI connection. (Check the status of the HDMI related
indications.)
–Check if the connected monitor equipment or other equipment supports HDCP. (This player will not output a video signal unless the
other equipment supports HDCP.)
–Connect the player to the display equipment using the Video cable
(supplied), and check the HDMI settings.
–Check if the output format of this player (HDMI FORMAT) matches
the supported input format of other connected equipment.
Picture freezes momentarily
–Check the disc for fingerprints/scratches and clean with a soft cloth
during playback
wiping from centre to edge.
–Clean the disc.
Disc can’t be played
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the Parental Lock or change the control level.
–Insert a correct disc that can be played on this player.
No return to start-up screen when disc is removed –Reset the player by switching the player off, then on again.
The player does not respond to the remote control –Aim the remote control directly at the sensor on the front of the
player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work or the player stops
–To completely reset the player, unplug the AC cord from the AC
responding
outlet for 5-10 seconds.
The remote control doesn’t seem to work
–Check if the REMOTE CONTROL IN jack on the rear panel is
connected.
–Check if the REMOTE CONTROL switch is set to the correct
position.
– 33 –
EN
English
TROUBLESHOOTING GUIDE
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:28 PM
Page 34
TROUBLESHOOTING GUIDE
The player does not respond to some
operating commands during playback
The player cannot read CDs/DVDs
Angle does not switch
Playback does not start when the title is selected
The password for rating level has been forgotten
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commercially available CD/DVD cleaner to clean the lens
before sending the player for repair.
–The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes.
–Check the “PARENTAL” setting.
–Enter the default password “4737”, then your forgotten password will
be cleared.
NOTES:
•
•
•
•
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this User Guide for
details of correct operations.
Playback from a desired track and Random Playback are not available during Programme Playback.
Some functions are prohibited on some discs.
When playing back Video CDs with PBC function, some operations (e.g., select and track repeat) cannot be performed.
Cancel PBC function temporarily to perform those operations. See page 17.
When connecting to an A/V amplifier using an HDMI cable, the audio signals can not be output correctly in some cases if
the speaker settings of the A/V amplifier are changed.
– 34 –
EN
Page 35
SPECIFICATIONS
PIN CONNECTION (A/V EURO CONNECTOR)
SIGNAL SYSTEM
PAL colour
20 18 16 14 12 10 8 6 4 2
APPLICABLE DISCS
(1) DVD-Video/DVD-Audio Discs
1-layer 12cm single-sided discs, 2-layer 12cm single-sided
discs, 2-layer 12cm double-sided discs (1 layer per side)
1-layer 8cm single-sided discs, 2-layer 8cm single-sided
discs, 2-layer 8cm double-sided discs (1 layer per side)
(2) Super Audio CD
(3) DVD-R/DVD-RW
(4) Compact discs (Audio CD, Video CD)
12cm discs, 8cm discs
(5) CD-R/CD-RW
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.3Vp-p
Output connectors: S connectors, 1 set
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
CB/PB output level: 0.7Vp-p (75Ω/ohms)
CR/PR output level: 0.7Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
HDMI OUTPUT
HDMI terminal, 1 set
AUDIO/VIDEO
21-pin scart jack
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
Multi channel (FL, FR, C, SL, SR, SW) output connector :
Pin jack, 1 set.
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48kHz sampling)
: 4Hz to 44kHz (96kHz sampling)
: 4Hz to 88kHz (192kHz sampling)
2 CDs
: 4Hz to 20kHz
3 Super Audio CD
: 4Hz to 100kHz
(2) S/N ratio
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.0045%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
English
05.8.4 5:28 PM
21 19 17 15 13 11 9 7 5 3 1
Contacts, signal levels and impedances
Contact 1
Audio Output (Right):
Contact 3
Audio Output (Left):
Contact 4
Audio, Ground
Contact 5
RGB, Ground (Blue)
Contact 7
RGB Output (Blue):
Contact 8
Function Select Switching Control
2.0Vrms/01kΩ
2.0Vrms/01kΩ
0.7Vp-p/75Ω
L : 0.0~2.0V DC
Power Off
M: 4.5~7.0V DC
Wide-Screen Mode
(16:9)
H: 9.5~12.0V DC
Normal Mode (4:3)
Contact 9
RGB, Ground (Green)
Contact 11
RGB Output (Green):
Contact 13
RGB, Ground (Red)
Contact 14
RGB Switching Control, Ground
Contact 15
RGB Output (Red):
Contact 16
RGB Switching Control
H: 3.3V DC
Contact 17
Video Output Signal, Ground
Contact 18
Video Input Signal, Ground
Contact 19
Video Output (CVBS):
Contact 21
Common Ground (shielding)
0.7Vp-p/75Ω
0.7Vp-p/75Ω
RGB Mode
1.0Vp-p/75Ω
7
E61M7ED/E61M9ED(EN).qx3
DIGITAL AUDIO OUTPUT
Optical digital output: Optical jack, 1 set
Coaxial digital output: Pin jack, 1 set
303
313
POWER SUPPLY
AC 200-240V, 50Hz
POWER CONSUMPTION
15 W
3
MAXIMUM EXTERNAL DIMENSIONS
440 (width) x 65 (height) x 313 (depth) mm
MASS
2.5 kg (5.5 lbs)
53.5
65
(mm)
– 35 –
11.5
REMOTE CONTROL UNIT
RC6600DV
Infrared pulse type
Supply: DC 3V, 2 R6P/AA batteries
440
EN
E61M7ED/E61M9ED(EN).qx3
05.8.4 5:28 PM
Page 36
www.marantz.com
You can find your nearest authorized distributor or dealer on our website.
U.S.A
Marantz America, Inc.
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
Marantz Europe B.V.
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
2005/08
Printed in China
00M38BW851310
1VMN21028
E61M7/M9ED ★★★★★
Download PDF