LER400R Series Recessed Exit Sign FEATURES TYPICAL SPECIFICATIONS

LER400R Series Recessed Exit Sign FEATURES TYPICAL SPECIFICATIONS
Project/Location:
Contractor:
Date:
LER400R Series
Prepared by:
Recessed Exit Sign
Lumacell Model:
FEATURES
•Durable extruded, one-piece aluminum housing
•Extruded aluminum faceplate with overlapping trim is standard
•Universal, field-selectable chevrons (knockout)
•Long-life, energy-efficient ALINGAP LED light source
•Indirect refractive technology provides bright, even illumination
•Energy efficient – consumes less than 3.5W per face in AC or DC mode
•Normal AC and emergency DC operation – 120/277/347VAC input; 6 to
24V two-wire DC input
•Nickel-Cadmium battery provides at least 90 minutes of emergency
operation in DC mode
•CSA certified, meets or exceeds C860 requirements
DIMENSIONS
Dimensions are approximate and subject to change.
TYPICAL SPECIFICATIONS
Supply and install the Lumacell® C860 Recessed LER400R Exit Sign.
The LER400R exit shall be recessed mount. The equipment shall operate
with universal AC input voltage of 120, 277 or 347VAC at less than 1.5W
and universal two wire DC input voltage from 6VDC to 24VDC at less than
1.5W. The face shall be constructed of extruded aluminum and have an
overlapping trim allowing for installation in any location. The faceplate shall
come standard with knockout chevrons. The recessed back box shall be of
rugged steel construction. The light source shall be light emitting diodes (LED).
Red LED technology shall be ALINGAP. The LED lamps shall provide illumination
in normal and emergency operation and shall be mounted inside the exit
housing, not on the face. An LED sensitive diffuser shall be mounted behind
the legend to provide the 6” high by 3/4” stroke letters with even illumination.
The Exit Sign in a Self-Powered configuration shall be equipped with a NickelCadmium battery and shall stay illuminated during emergency operation for at
least 90 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved.
.
The equipment shall be Lumacell® Model:
21/2” [6.5 cm]
123/4” [32.4 cm]
21/4” [5.7 cm]
WIRE GUARDS
Wall Mount
71/2” [19 cm]
87/8” [22.7 cm]
460.0091-L
143/4” [37.5 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/ standard DC, red
120/277/347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
AC/ special DC, red
120/277/347VAC
Less than 3W
36 or 48 or 120VDC
Less than 2.5W
Self-Powered, red
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
Minimum 90 minutes
AC/ standard DC, green
120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
Self-Powered, green
120 to 347VAC
Less than 3.5W
Nickel-Cadmium battery
Minimum 90 minutes
ORDERING INFORMATION
SERIES
LER400R= LED
aluminum recessed
EXIT
COLOUR
Blank= factory white
BK= black
BA= brushed aluminum
TA= textured aluminium
VOLTAGE
UNIV= 120/277/347VAC, 6 to 24VDC
120VACDC2= 120VAC, 120VDC, 2 wires
UNIV36= 120/277/347VAC, 36VDC, 4 wires
UNIV48= 120/277/347VAC, 48VDC, 4 wires
UNIV120= 120/277/347VAC, 120VDC, 4 wires
SP= 120/347VAC, Self-Powered
OPTIONS
TP= tamper proof screws
VRTP= polycarbonate shield and tamper proof screws
GN= green legend
990.0119-L= tamper proof bit*
*One bit needed per order.
EXAMPLE: LER400RUNIV
www.lumacell.com
35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement