WalkAbout | Hammerhead XRT | Tripod Holder for Field Calculators

Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
System 168: Tripod Holder for Field Calculators
Ø 168 mm
Ø 163 mm
Tripods for field calculator holder
3 mm
head diameter 168 mm. The ring of the holder is placed on a small ledge.
• no plate in between necessary, which could influence the power transmission tripod-tribrach
• the tribrach remains fully movable
• the tripod holder can also be removed or attached with centred tribrach.
Regular tripods (heavy design)
with a ledge already screwed on the tripod head.
Manufacturer
Material
Clamping
Order-No.
NEDO
NEDO
NEDO
Aluminium
wood
wood
eccentric
eccentric
screws
200524 Plus 149,– €
200513 Plus 149,– €
200533 Plus 149,– €
Glunz
Glunz
Glunz
Glunz
Aluminium
wood
Aluminium
wood
eccentric
eccentric
screws
screws
1132-E-Plus
1129-E-Plus
1132-Plus
1129-Plus
183,–
178,–
175,–
170,–
€
€
€
€
Ø 168 mm
Adapter Rings System 168
Already existing tripods with a smaller head diameter can be easily refitted with adapter rings made of
synthetic material.
The adapter rings made of black shock-proof synthetic material can be attached with 3 screws.
To do this, you only have to drill three holes with Ø 4,0 mm on the side of the tripod head.
The rings have an uniform external diameter of 168 mm. The internal diameter is adapted to the tripod
type (also suitable for triangular tripod plates, for example Leica (WILD).
The following rings are available:
Tripod type
head Ø
CST 60-WDF20, 60-ALQR20
Leica (triangular tripod plates)
Glunz G3, G3M
Nedo 200100, 200200
Nedo 200512, 200523
approx.
approx.
approx.
approx.
approx.
153
156
158
139
157
adapter ring Order-No.
mm
mm
mm
mm
mm
1960
1962
1965
1968
1969
30,–
30,–
30,–
30,–
30,–
€
€
€
€
€
Adapter rings for additional tripod types available upon request!
Rotatable tripod holder Uni 168
The holder can be used together with above mentioned tripods.
• The cylinder Ø of 31 mm at the side to attach clamping systems as they are used for tripod legs or GPS
and prism poles.
• Suitable for field calculators up to 1 kg weight.
• The counter weight grants an even loading of all tripod legs when turning the holder.
Uni 168, incl. counter weight
2005/44
Order-No. 1900
135,– €
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
System 168: clamps for the tripod holder Uni 168
Uni clamps
The open profile allows screwing the uni clamps:
• on the above tripod holder Uni 168 (s. page 44)
• as well as on prism and antenna poles. No
complicated threading necessary.
For poles of Ø 19 – 32 mm.
Uni clamp
Order-No. 1890
60,– €
Uni clamp with circular level (45')
Order-No. 1891
65,– €
Uni clamp with compass
Order-No. 1893
65,– €
Uni clamp with circular level (45') and compass
Order-No. 1892
75,– €
Uni holder
For electronic field books to connect to the Uni clamp 1890-1893 by a quick connection.
A variable positioning pin assures different inclinations of the calculator holders and fixes the position
chosen.
for field computer
Husky FS-Series and MP 2500
Husky FS-Series
Sokkia SDR 33 and Trimble TDC 1
Trimble TSC 1 and Husky MP 2500
Order-No.
1895
1896
1897
1898
90,–
90,–
90,–
90,–
€
€
€
€
er
for furth
Holders on request!
tors
calcula
2005/45
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
System 168: Tripod holders for field calculators
Panasonic CF-P1 on rotatable tripod holder Uni 168
The use of the CF-P1 is possible for the holders with Order-No. 5182.1 and 5184.1 (see catalogue page 52)!
lculators
er
field ca
t
h
g
li
od hold
r
f othe
ble trip
o
ta
le
e
s
b
ta
u
u
ro
o
d
e
The
of our
with th
upport
. 1 kg)
s
x
a
e
m
th
h
(up to
way.
ible wit
simple
is poss
e in a
rs
e
v
Uni 168
ded! –
a
e
joint tr
hen ne
w
t
s
e
u
e req
– Pleas
Rotatable tripod holder T 168
For Trimble TSC1, Husky MP2500, FS/GS and FS-series.
Firm unity of tripod ring and field computer holder. Stable clamping of the field computer in the holder.
Smooth inclination of the holder for optimal viewing and handling of the field computer.
T 168 (incl. counter weight)
2005/46
Order-No. 1915
199,– €
All prices excluding VAT.
Bohnenstingl
ITRONIX
Husky fex21
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Panasonic
Panasonic
Walkabout
Toughbook
CF-VDW07
Toughbook
CF-18
Hammerhead
XRT
ipod
Light tr. catalogue
s
g
in
o
easy g page 54
2005/47
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Holders for Panasonic Toughbook CF-18 and
Walkabout Hammerhead XRT
For the universal use of the calculators in the field
• light metal construction finished in black
• ldifferent female threads installed in the centre to connect with tripods, GPS- and prism poles, etc.:
- 1/4” photo thread
- M8 (3/8” on request)
- 2 x M5 thread for ball joint Ø 25mm
• lvery quick positioning and removing of the calculators from the holder by a quick clamp: for the CF-18
with a rotatable lever, for the XRT with a snap lock.
• lTransport of the calculator also possible in headfirst position (for the CF-18 in the laptop as well as in
the tablet PC function)
• lWithout further accessories, the holder can be used:
- With normal photo tripods with 1/4” thread
- With our light tripod (see catalogue page 54)
• lWeight: 490 / 440 g
Holder for Panasonic CF-18
Order-No. 5170
148,– €
Holder for Hammerhead XRT (with protection)
Order-No. 5250
148,– €
Holder for Hammerhead XRT (with reflicator)
Order-No. 5250.R
168,– €
Traverses
The attachment on the tripods legs and on GPS- and prism poles can be done with a clamp which will
be inserted on the side and fixed with a handle.
For the connection between holder and leg/ pole clamp, 3 different types of traverses are available:
• Telescopic traverse: the adaptation of the length can be done with a telescopic extension. A stable ball
joint with a M8 connection facilitates the quick optimised positioning of the holder. It can be rotated
and tilted and can be used in an optimum distance to the tripod leg or pole.
Telescopic-Traverse
• Profile traverse: Very strong traverse made of aluminium 30x30mm. The optimised installation of the
holder is also done by a ball joint with M8 connection. The construction of the ball joint allows the
adaptation and the fixation of the distance to the tripod leg or pole.
• Double joint traverse: A ball joint Ø 25mm will be screwed on the calculator holder (2x M5). The 2nd
ball joint is attached at the leg/pole clamp. With a central turning lever on the double joint traverse, the
holder can be fixed in an optimised position (rotating, tilting, and inclining). Also, the optimised adaptation of the distance to the tripod leg or the pole is possible. The two ball joints are covered with elastic to make them more shock resistant.
Traverse
Weight
Traverse
Profile-Traverse
Incl. holder for
Panasonic CF 18
Incl. holder for
Hammerhead XRT
With clamp for With clamp for With clamp for With clamp for
ø 18-32 mm
ø 30-45 mm
ø 18-32 mm
ø 30-45 mm
Order-No.
Double joint Traverse
Telescopic-Traverse
Profile-Traverse 30x30 mm
Double joint Traverse
(incl. Ball joint for
Calculator Holder)
Order-No.
Order-No.
Order-No.
340 g
410 g
5172.1 255,– € 5172.2 255,– € 5252.1 255,– € 5252.2 255,– €
5173.1 255,– € 5173.2 255,– € 5253.1 255,– € 5253.2 255,– €
350 g
5174.1 255,– € 5174.2 255,– € 5254.1 255,– € 5254.2 255,– €
2005/48
All prices excluding VAT.
S p e c i a l
Bohnenstingl
S u r v e y i n g
A c c e s s o r i e s .
Centric tripod/pole connections
If the holders should be used with a tripod or a pole, the following adaptation possibilities are available:
Ball joint M8
Assures in a few seconds the optimum positioning of the calculator regarding ergonomics and sun light.
• Simple and stable clamping of the position chosen
• Top:
M8 male thread for attachment at the calculator holder
• Bottom:
M8 female thread to screw it on
- Poles with M8 male thread
- Adapter stubs (see below)
- Tripod plates (see below)
• Maximum load: 15 kg
• Weight:
140 g
Ball joint M8
Order-No. 5081
48,– €
Adapter stubs Ø 25mm
• Top:
M8 male thread to screw in
- The above mentioned ball joint M8 or
- Directly into the calculator holder (inclining and rotating must then be done by
moving the tripod)
• Bottom:
5/8” female thread for use on one-leg tripods (to put in natural ground) or other
poles with 5/8” male thread
• Outside Ø 25mm: for the use on simple ranging poles or prism pole tripods with cylindrical connection
and clamping.
Adapter stub Ø 25 mm, M8 male thread
Order-No. 383
24,50 €
Tripod plate with M8 male thread
Stable construction made of anodised aluminium.
For application on tripods with a flat tripod head.
• Top:
• Bottom:
M8 male thread to screw in
- The above mentioned ball joint M8 or
- Directly into the calculator holder (inclining and turning must then be done by
moving the tripod)
5/8” female thread to attach on tripod with 5/8” screw.
Tripod plate 5/8”, M8 male thread
Order-No. 3035
35,– €
Examples of applications:
ipod
Light tr oing
g
y
s
ea
54
g page
s. catalo
2005/49
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Holder for Panasonic CF-VDW07 (Display)
and ITRONIX Husky fex21
For the universal use of the calculators in the field
• light metal construction finished in black
• different female threads installed in the centre to connect with tripods, GPS- and prism poles, etc.:
- 1/4” photo thread
- 2x M5 thread for ball joint Ø 25mm
• very quick positioning and removing of the calculators from the holder by a quick clamp with a rotatable lever.
• The hand loops have not to be removed to put it in the holder
• Transport of the calculator also possible in headfirst position
• Without further accessories, the holder can be used:
- With normal photo tripods with 1/4” thread
- With our light tripod (see catalogue page 54)
• Weight: 340 g
Holder for Display Panasonic CF-VDW07
Order-No. 5090
148,- €
Holder for ITRONIX Husky fex21
Order-No. 5190
148,- €
- as long as stocks last -
Traverses
The attachment on the tripods legs and on GPS- and prism poles can be done with a clamp which will
be inserted on the side and fixed with a star handle.
For the connection between holder and leg/ pole clamp, 2 different types of traverses are available:
• Telescopic traverse: the adaptation of the length can be done with a telescopic extension. A stable ball
joint with a 1/4” connection facilitates the quick optimised positioning of the holder. It can be rotated
and tilted and can be used in an optimum distance to the tripod leg or pole.
• Double joint traverse: A ball joint Ø 25mm will be screwed on the calculator holder (2x M5). The 2nd
ball joint is attached at the leg/pole clamp. With a central turning lever on the double joint traverse, the
holder can be fixed in an optimised position (rotating, tilting, and inclining). Also, the optimised adaptation of the distance to the tripod leg or the pole is possible. The two ball joints are covered with elastic to make them more shock resistant.
Telescopic-Traverse
Traverse
Weight
Traverse
Incl. holder for
Panasonic CF-VDW07
Incl. holder for
ITRONIX Husky fex21
With clamp for With clamp for With clamp for With clamp for
ø 18-32 mm
ø 30-45 mm
ø 18-32 mm
ø 30-45 mm
Order-No.
Double joint Traverse
Telescopic Traverse
Double joint Traverse
(incl. Ball joint for
Calculator Holder)
Order-No.
Order-No.
Order-No.
320 g
5100.1 255,- € 5100.2 255,- € 5200.1 255,- € 5200.2 255,- €
350 g
5105.1 255,- € 5105.2 255,- € 5205.1 255,- € 5205.2 255,- €
2005/50
All prices excluding VAT.
S p e c i a l
Bohnenstingl
S u r v e y i n g
A c c e s s o r i e s .
Centric tripod/pole connections
If the holders should be used in a centric position with a tripod or a pole, the following adaptation possibilities are available:
Ball joint 1/4”
Assures in a few seconds the optimum positioning of the calculator regarding ergonomics and sun light.
• Simple and stable clamping of the position chosen
• Top:
1/4” male thread for attachment at the calculator holder
• Bottom:
1/4” female thread to screw it on
- Poles with 1/4” male thread
- Adapter stubs (see below)
- Tripod plates (see below)
• Maximum load: 10 kg
• Weight:
80 g
Ball joint 1/4”
Order-No. 5080
45,- €
Adapter stubs Ø 25mm
• Top:
• Bottom:
1/4” male thread to screw in
- The above mentioned ball joint 1/4” or
- Directly into the calculator holder (inclining and turning must then be done by
moving the tripod)
5/8” female thread for use on one-leg tripods (to put in natural ground) or other
poles with 5/8” male thread
- Outside Ø 25mm: for the use on simple ranging poles or prism pole tripods with
cylindrical connection and clamping.
Adapter stub Ø 25 mm, 1/4” male thread
Order-No. 390
24,50 €
Tripod plate with 1/4” male thread
Stable construction made of anodised aluminium.
For application on tripods with a flat tripod head.
• Top:
1/4” male thread to screw in
- The above mentioned ball joint 1/4” or
- Directly into the calculator holder (inclining and turning must then be done by
moving the tripod)
• Bottom:
5/8” female thread to attach on tripod with 5/8” screw.
Tripod plate 5/8”, 1/4” male thread
Order-No. 3030
35,- €
Examples of applications:
ipod
Light tr. catalogue
s
g
in
o
easy g page 54
2005/51
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Holders for the Mini PC Panasonic CF-07
For the universal attachment of the Mini PC on tripods or GPS poles.
picture 1
With the possibilities to attach the holder CF-07, the calculator can be used as follows:
• on the tripod: hanging in the splicing plate (picture 1)
• on the GPS pole or on the tripod leg: attached with a screw clamp (picture 2)
The fixation of the calculator in the holder is done in a second by a clamp lever. The calculator is secured against falling off and can also be transported in a headfirst position (for example at the GPS pole).
picture 2
Holder CF-07, only with splicing plate
Order-No. 5150
85,– €
Holder CF-07, with splicing plate and clamp screw
Order-No. 5151
145,– €
Holder for Panasonic Toughbook CF-P1
For use of the handheld computer in the field
s.
ipod
Light tr oing
easy g page 54
catalog
• Light metal construction finished in black
• different female threads installed in the centre to connect with tripods, GPS- and prism poles, etc.:
- 1/4” photo thread
- 2x M5 thread for ball joint Ø 25mm
• very quick positioning and removing of the calculators from the holder by a quick clamp with a turning
lever.
• To put it into the holder, the handle has not to be removed
• Transport of the handheld also possible in a headfirst position
• Without further accessories, the holder can be used:
- With normal photo tripods with 1/4” thread
- With our light tripod (see catalogue page 54)
• Weight: 140 g
Holder for Panasonic CF-P1
85,– €
Order-No. 5180
The use on tripods or poles
The attachment on the tripod legs, GPS- and prism poles and on the rotatable tripod holder Uni 168 can
be done with an aluminium clamp which will be inserted on the side and fixed with a star handle.
For the connection between screw-clamp and holder, 2 different types are available:
• Ball joint 1/4”: The handheld holder will be screwed into the 1/4” thread of the ball joint. The ball joint
facilitates the quick optimised positioning of the holder. It can be rotated and tilted and can be used in
an optimum distance to the tripod leg or pole.
• Double joint traverse: A ball joint Ø 25mm will be screwed on the calculator holder (2x M5). The 2nd
ball joint is attached at the leg/pole clamp. With a central turning lever on the double joint traverse, the
holder can be fixed in an optimised position (rotating, tilting, and inclining). Also, the optimised adaptation of the distance to the tripod leg or the pole is possible. The two ball joints are covered with elastic to make them more shock resistant.
For both applications, the handheld computer may be used as following:
• on the leg of the instrument tripod
• on the GPS- or prism pole
• on the rotatable tripod holder Uni 168 (see catalogue page 44)
Equipment:
Holder CF-P1 with
Weight
Ball joint 1/4”
Double joint traverse
ball joint for calculator
holder)
With screw clamp for
Ø 18-32 mm
With screw clamp for
Ø 30-45 mm
Order-No.
Order-No.
80 g
5182.1 190,– €
5182.2 190,– €
250 g
5184.1 190,– €
5184.2 190,– €
Centric tripod/pole connections
Possibilities for a centric use of the holders on a tripod or a pole: see catalogue page 51
2005/52
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Holder for OPC data modem NiceCom 800
For the data transmission by radio, one modem has to be connected to the total station/EDM and another one to the external field calculator (laptop, tablet PC, handheld etc.)
picture 1
For this application of geometers, we have developed a special holder for the modem NiceCom 800:
• light metal construction finished in black
• very quick positioning and removing of the modem from the holder:
- by quick lock with a rotary lock
- by Velcro ® fastener
• splicing plate to hang on the instrument tripod (picture 1)
• the modem is secured against falling off and can also be transported in a headfirst position (for example at the GPS- or prism pole).
picture 2
picture 3
The holder is available in two more formats to attach on cylindrical poles:
• with an aluminium clamp and screw clamp
- with a spring steel clamp and Velcro ® fastener
The holder provides the following ways of attachment in this format:
• on the instrument tripod:
- by hanging on the splicing plate at the tripod head (picture 1)
- by clamping it on a tripod leg with spring steel clamp (picture 2) or with an aluminium clamp with
screw clamp (picture 3)
• on the GPS- or prism pole:
- by clamping it on the pole with a spring steel clamp (picture 4) or with an aluminium clamp with
screw clamp (picture 5)
picture 5
picture 4
Equipment:
Holder NiceCom 800 with
picture 6
picture 7
picture 8
Splicing plate to hang on the tripod head (picture 6)
Additionally, with aluminium clamp and screw clamp
For pole Ø 18-32 mm (picture 7)
Additionally, with aluminium clamp and screw clamp
For pole Ø 30-45 mm
Additionally, with spring steel clamp and Velcro ® fastener
For pole Ø 20-35 mm (picture 8)
Weight
Order-No.
140 g
5300 83,– €
250 g
5302 143,– €
270 g
5305 143,– €
160 g
5325 88,– €
Use of the NiceCom holder with the Panasonic Toughbook CF-18 and the
Walkabout Hammerhead XRT
If you use a field calculator, there has to be a permanent cable connection between the calculator and
the NiceCom modem.
If you often change between using it on the light tripod, the GPS pole and prism pole, it would be useful
that the holders for both tools build a unity.
Therefore it is possible to screw both holders together.
A separation of the cable connection would then not be necessary anymore if you use it differently.
All holders for the CF-18 (Order-No. 5170-5174, see catalogue page 48) and the Hammerhead XRT (52505254, see catalogue page 48) are already prepared accordingly.
All holders for the CF-18 (Order-No. 5170-5174, see catalogue page 48) and the
Hammerhead XRT (5250-5254, see catalogue page 48) are already prepared
accordingly.
From the above mentioned NiceCom holders, the order numbers 5300, 5302 and 5305 are suitable.
2005/53
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Light tripod easy going for
field calculators / notebooks
The ideal use of a field calculator not integrated in the total station/EDM was the rotatable holder directly
on the instrument tripod (our system 168, see catalogue page 44).
Large amounts of data, which have to be available in the field today, as well as the desire to do the
complete data processing already in the field, have made it necessary to use a notebook with a strong
processor, high memory capacity and a large display. This is not possible directly on the instrument tripod because of its high weight. Our investigations during use have shown, that more measuring errors
are produced with a weight of more than 1 kg. In addition, the holder together with the necessary counter weight is heavy and uncomfortable to use.
1/4“, M8, 3/8“
Another reason to separate the notebook from the instrument tripod is the modern way of measuring –
in the one-man-operation or with the robotic measuring the total station/EDM will be operated from a
control unit or with the notebook. The data transmission by cable will then be replaced by a Bluetooth or
radio connection without cable. The solution with radio covers also large distances (1 km).
However, when using a notebook (laptop, tablet-PC), which will be hold with a carrier system around the
neck, the relatively high weight of the machine is uncomfortable during longer use.
The use of the calculator on a light tripod does also resolve this problem. Together with a data transmission without cable, the notebook can be placed anywhere near the total station/EDM. When measuring in
the robotic mode, the simple taking and placing of the calculator directly at the object point is possible.
There is no disturbing heavy tools around the neck; the operator can do something else during measuring.
The new calculator tripod easy going was developed especially for this area of application. It is characterized by the following details of construction:
• very simple use and extremely robust
• very light (weight: 850 g)
• legs and middle strut made of very durable compound material: blend of carbon/fibre glass
• comfortable carrying of the tripod also during cold weather
• secure clamping of the middle strut with a high quality synthetic clamp and an eccentric clamp lever
• red coloured for better visibility in the traffic, on the construction sites etc.
• dimensions: 0,75 m (retracted) till 1,2 m (extended)
• many connections for different calculator holders
• alternatively available with changeable pins of stainless steel or elastic balls
Light tripod easy going
Light tripod easy going
Connection Calculator/notebook/hoders
1/4“ male thread
M8 male thread
3/8” male thread
receptacle for joint ball Ø 25 mm
with tripod legs
pins of stainless steel
Order-No.
5350.1
5351.1
5352.1
5353.1
220,–
220,–
220,–
240,–
€
€
€
€
elastic balls
Order-No.
5350.2
5351.2
5352.2
5353.2
220,–
220,–
220,–
240,–
€
€
€
€
Additional equipment:
Changeable tripod legs:
Pins of stainless steel with M6 female thread, 3 pieces
Order-No. 5355
20,– €
Elastic balls with M6 female thread, 3 pieces
Order-No. 5356
20,– €
2005/54
All prices excluding VAT.
Bohnenstingl
S p e c i a l
S u r v e y i n g
A c c e s s o r i e s .
Tripod upper part for connection of the calculators or holders
Ball joint 1/4” for the tripod easy going – Order-No. 5350 –
The ball joint 1/4” will be screwed on the light tripod. On this the calculator holder will be screwed also
with a 1/4” thread.
• Easy and stable clamping of the ball joint with a star handle on the side
• Assures in a few seconds the optimum positioning of the calculator regarding ergonomics and sun light.
• Maximum load: 10kg
• Weight: 80g
Ball joint 1/4”
Order-No. 5080
45,– €
Ball joint M8 for the tripod easiy going – Order-No. 5351 –
The ball joint M8 will be screwed on the light tripod. On this, the calculator holder will be screwed also
with a M8 thread.
• Simple and stable clamping of the position chosen
• Assures in a few seconds the optimum positioning of the calculator regarding ergonomics and sun light.
• Maximum load: 15 kg
• Weight: 140 g
Ball joint M8
Order-No. 5081
48,– €
Joint ball Ø 25mm for the tripod easy going – Order-No. 5353 –
The joint ball will be screwed on any calculator holder (2xM5 thread).
• Easy installation of the joint ball and the calculator holder in the ball connection of the light tripod.
• Clamping of the joint ball with a turning lever
• Assures in a few seconds the optimum positioning of the calculator for the measuring
• Suitable for the light tripods for calculators upto 4 kg
• Weight: 40g
• Further possibilities of using the joint ball as calculator holder on the instrument tripod, GPS- or prism
pole with double-joint traverse (see catalogue page 48)
Joint ball Ø25mm, with 2 M5 screws
Order-No. 5175
18,– €
Examples of application:
2005/55
All prices excluding VAT.
Download PDF