XO : XOi : X86 : DR-X84T : XOir MANUAL - RS232 Manual

XO : XOi : X86 : DR-X84T : XOir MANUAL - RS232 Manual
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
AMC XO
8 Zone 8 Source Audio Digital Home System
XOi
4 Zone 4 Source Audio Digital Home System
X86
6 Zone 8 Source Audio / Video Digital Home
System
DR-X86T
XOir
Appendix I
RS232 Manual
1
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
XO/XOi/X86 MANUAL - Appendix
I
RS232 Manual
Table of Contents
1. Table of Contents.........................................................2
2. Serial port specification ...............................................3
• Serial Port Hardware.................................................... 3
• Serial Port Communication Protocol ............................... 3
3. Command set specification ..........................................3
• Command Format........................................................ 3
• COMMAND.................................................................. 3
• RETURN ..................................................................... 3
• ERROR RETURN .......................................................... 4
4. Numbering Format and Range .....................................4
• Zone Number Range .................................................... 4
• Source Select Range .................................................... 4
5. Standard Status Feedback Format ...............................4
• Status Feedback Conditions .......................................... 4
• Status Feedback Format............................................... 4
• Special Conditions ....................................................... 5
6. Command Reference ....................................................6
• Zone Status................................................................ 6
• Tone Control Settings .................................................. 6
• Power OFF.................................................................. 6
• Power ON ................................................................... 6
• Power Toggle .............................................................. 7
• All Zones OFF ............................................................. 7
• Un-mute all Zones ....................................................... 7
• Mute all Zones ............................................................ 8
• Source Select ............................................................. 8
• Adjust Volume ............................................................ 8
• Volume Up 1dB ........................................................... 9
• Volume Down 1dB ....................................................... 9
• Zone Mute OFF ........................................................... 9
• Zone Mute ON ............................................................ 9
• Adjust Bass .............................................................. 10
• Adjust Treble ............................................................ 10
• Group Mode OFF ....................................................... 11
• Group Mode ON ........................................................ 12
2
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
Serial port specification
Serial Port Hardware
• Standard DB9 RS232 connector
Serial Port Communication Protocol
• RS232 asynchronous serial communication
• XOir:
◦ 9600 bps, 8 bits, 1 stop bit, no parity
• All other models:
◦ 38400 bps, 8 bits, 1 stop bit, no parity
• no flow control
Command set specification
Command Format
• All commands are in ASCII characters
• All commands begin with "*" (asterisk) character and end with
<CR> character (0D hexadecimal)
• All commands RETURN with some feedback begin with "*"
(asterisk) character and and end with <CR> character (0D
hexadecimal)
• If a command produces an error or structured with incorrect
syntax, the system will return with "?<CR>" characters
• Multiple commands require a delay of 500ms between commands
COMMAND
RETURN
3
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
ERROR RETURN
Numbering Format and Range
Zone Number Range
•
•
•
•
•
XO: 01-08
XOi: 01-04
XOir: 01-04
X86: 01-06
DR-X86T: 01-06
Source Select Range
•
•
•
•
•
XO: 01-08
XOi: 01-04
XOir: 01-04
X86: 01-08
DR-X86T: 01-08
Standard Status Feedback Format
Status Feedback Conditions
• Most commands send to the system will receive this type of Status
Feedback unless specified explicitly
• Upon any keypad and IR action, there will be some automatic
feedback from the system:
◦ Keypad: Upon any key presses from keypads in any zones,
the unit will send updated status feedbacks via RS232 port.
◦ IR: Upon any IR commands received from any IR receivers,
the unit will send updated status feedbacks via RS232 port.
◦ XOir: Keypad and IR are not available under XOir model.
Status Feedback Format
RETURN ZNaa,SRCbb,GRPc,VOL-dd
aa = Zone Number
RETURN bb = Source Select
PARAMETERS c = 0 (Group Mode Off), 1 (Group Mode On)
dd = dBs of attenuation (00 – 62 where 62=mute)
4
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
Special Conditions
• When a user press and hold the Power Button on any of the
keypads to turn off ALL zones, there will be TWO RS232 responses:
◦ The first response is the normal Status Feedback response:
ZNaa,SRCbb,GRPc,VOL-dd
◦ The second response is the ALL ZONES OFF response:
ZALLOFF
5
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
Command Reference
Zone Status
ACTION
Zone Status Command returns status information on the
given zone
COMMAND ZnnSTA00
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Tone Control Settings
ACTION Return tone control settings on the given zone
COMMAND ZNnnSET00
COMMAND
nn = Zone Number
PARAMETERS
RETURN ZNaa,BASSbb,TREBbb,GRPc
aa = Zone Number
RETURN
bb = EQ level +/- 8,6,4,0
PARAMETERS
c = 0 (Group Mode Off), 1 (Group Mode On)
Power OFF
ACTION
Power OFF the given zone (turn off ALL zones in group
mode and leave group mode)
COMMAND ZNnnPWR00
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Power ON
ACTION
Power ON the given zone (restore last select source and
volume level)
6
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
COMMAND ZNnnPWR01
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Power Toggle
ACTION Toggle between power On/Off for the given zone
COMMAND ZNnnPWR02
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
All Zones OFF
ACTION Turn off ALL Zones
COMMAND ZALLPWR00
COMMAND
PARAMETERS
RETURN ZALLOFF
RETURN
PARAMETERS
Un-mute all Zones
ACTION Disable mute for ALL Zones
COMMAND ZALLMUT00
COMMAND
PARAMETERS
RETURN ZALLMOFF
RETURN
PARAMETERS
7
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
Mute all Zones
ACTION Apply mute for ALL Zones
COMMAND ZALLMUT01
COMMAND
PARAMETERS
RETURN ZALLMON
RETURN
PARAMETERS
Source Select
ACTION Change a input source for the given zone
COMMAND ZNnnSRCss
COMMAND nn = Zone Number
PARAMETERS ss = Input Source
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Adjust Volume
ACTION Adjust volume for the given zone
COMMAND ZNnnVOLvv
COMMAND nn = Zone Number
PARAMETERS vv = Volume Level (00 - 62 where 62=mute)
Standard Status Feedback Format
RETURN XOir only:
ZNaa,POWERp,MUTEm,SOURCEbb,VOL-dd
XOir only:
RETURN
PARAMETERS
aa = Zone Number
p = POWER 1 (ON) / 0 (OFF)
m = 1 (MUTE), 0 (NOT MUTE)
bb = Source Select
dd = dBs of attenuation (00 – 62 where 62=mute)
8
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
Volume Up 1dB
ACTION Step volume up 1dB for given zone
COMMAND ZNnnVOLUP
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Volume Down 1dB
ACTION Step volume down 1dB for given zone
COMMAND ZNnnVOLDN
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Zone Mute OFF
ACTION
Disable mute for the given zone with last volume
preserved
COMMAND ZNnnMUT00
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Zone Mute ON
ACTION
Apply mute for the given zone and memorize the current
volume
COMMAND ZNnnMUT01
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
9
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
RETURN
PARAMETERS
Adjust Bass
ACTION
Adjust Bass by +/- 0,4,6,8 dB
desired level)
(XOir: Sets Bass level to
ZNnnBASsn
COMMAND XOir only:
ZNzzBASnn
nn = Zone Number
s = + or - sign
n = Bass Adjustment Level (0,4,6,8)
XOir only:
zz = Zone Number
nn = Desired Bass Level (Bass range is from -12 to
+12 in 2eB steps)
COMMAND
PARAMETERS
The Bass Level uses the positive values:
00, 02, 04, 06, 08, 10, 12 for Flat (0dB)
and +dB
For -dB settings, the following values are
used: 22 (-2dB), 24 (-4dB), 26 (-6dB), 28
(-8dB), 30 (-10dB), 32 (-12dB)
ZNaa,BASSbb,TREBbb,GRPc
RETURN XOir only:
ZNaa,BASSbb,TREBbb
aa = Zone Number
RETURN
bb = EQ level +/- 8,6,4,0
PARAMETERS
c = 0 (Group Mode Off), 1 (Group Mode On)
Adjust Treble
ACTION
Adjust Treble by +/- 0,4,6,8 dB (XOir: Sets Treble Level
to desired values)
10
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
ZNnnTRBsn
COMMAND XOir only:
ZNzzTRBnn
nn = Zone Number
s = + or - sign
n = Treble Adjustment Level (0,4,6,8)
XOir only:
COMMAND
PARAMETERS
zz = Zone Number
nn = Desired Treble Level (Treble range is from
-12 to +12 in 2dB steps)
The Treble Level uses the positive values:
00, 02, 04, 06, 08, 10, 12 for Flat (0dB)
and +dB
For -dB settings, the following values are
used: 22 (-2dB), 24 (-4dB), 26 (-6dB), 28
(-8dB), 30 (-10dB), 32 (-12dB)
ZNaa,BASSbb,TREBbb,GRPc
RETURN
XOir only:
ZNaa,BASSbb,TREBbb
aa = Zone Number
RETURN
bb = EQ level +/- 8,6,4,0
PARAMETERS
c = 0 (Group Mode Off), 1 (Group Mode On)
Group Mode OFF
ACTION Disable Group Mode
COMMAND ZALLGRP00
COMMAND
PARAMETERS
RETURN GRPOFF
RETURN
PARAMETERS
11
XO / XOi / X86 / DR-X84T / XOir MANUAL - RS232 Manual - v3.3
Group Mode ON
ACTION Activate Group Mode
COMMAND ZALLGRPss
COMMAND
ss = Input Source for this group (01 - 04/08)
PARAMETERS
RETURN GRPON,STCss
RETURN
ss = Input Source selected for this group
PARAMETERS
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement