Mitsubishi | MDT652S | Specifications | Mitsubishi MDT652S Specifications

Features ................................................................................................................................................................................... English-2
Important Information .............................................................................................................................................................. English-3
Declaration ............................................................................................................................................................................... English-5
Safety Precautions, Maintenance & Recommended Use ....................................................................................................... English-6
Contents ................................................................................................................................................................................... English-7
Parts Name and Functions ....................................................................................................................................................... English-8
Buttons, Switch, and Indicator .................................................................................................................................. English-8
Connectors and Terminals ........................................................................................................................................ English-9
Wireless Remote Control .......................................................................................................................................... English-10
How to Use the Wireless Remote Control ................................................................................................................ English-11
CAT5 Tx BOX ............................................................................................................................................................. English-12
Preparation for use .................................................................................................................................................................. English-13
Flow of preparation ................................................................................................................................................... English-13
[P-1] Preparation for installation ............................................................................................................................................ English-14
Determine the installation location ............................................................................................................................ English-14
Ventilation requirements for enclosure mounting ..................................................................................................... English-14
[P-2] Installing the monitor ..................................................................................................................................................... English-15
Using the wall mount or ceiling mount ...................................................................................................................... English-15
Installing in the portrait position ................................................................................................................................ English-15
[P-3] Installing the optional speakers .................................................................................................................................... English-16
[P-4] Connection procedure .................................................................................................................................................. English-17
Wiring diagram .......................................................................................................................................................... English-17
Prevention of disconnection of HDMI cable ............................................................................................................. English-17
Connecting with a computer (analog connection) .................................................................................................... English-18
Connecting with a computer (digital connection) ..................................................................................................... English-19
Connecting a video device (component video/HDMI device) .................................................................................. English-20
Connecting a video device (composite video/S video device)/stereo amplifier ...................................................... English-21
[P-5] Connecting CAT5 .......................................................................................................................................................... English-22
CAT5 for long-distance connection or multiple-monitor connection ........................................................................ English-22
[P-6] Connecting RS-232C .................................................................................................................................................... English-24
Monitor control via RS-232C ..................................................................................................................................... English-24
[P-7] Connecting LAN ............................................................................................................................................................ English-25
Monitor connection using LAN ................................................................................................................................. English-25
[P-8] Connecting the power cord to the monitor .................................................................................................................. English-26
Connecting the power source ................................................................................................................................... English-26
How to Use ............................................................................................................................................................................... English-27
Flow of How to Using ................................................................................................................................................ English-27
[U-1] Turning on all the connected devices ........................................................................................................................... English-28
Turning on external devices ...................................................................................................................................... English-28
Turning on the monitor .............................................................................................................................................. English-28
Power Management Function ................................................................................................................................... English-28
[U-2] Selecting the video input .............................................................................................................................................. English-29
[U-3] Controlling the external devices ................................................................................................................................... English-30
[U-4] Auto-setup .................................................................................................................................................................... English-30
[U-5] Selecting the picture mode ........................................................................................................................................... English-30
[U-6] Screen adjustment ........................................................................................................................................................ English-31
[U-7] Picture adjustment ........................................................................................................................................................ English-31
[U-8] Volume control .............................................................................................................................................................. English-32
[U-9] Schedule setting ........................................................................................................................................................... English-32
How to set up schedule ............................................................................................................................................. English-33
[U-10] Remote control .............................................................................................................................................................. English-34
RS-232C/RS-485 Remote control ............................................................................................................................ English-34
LAN Remote control .................................................................................................................................................. English-36
Configuration and basic operation of OSD screen ................................................................................................................. English-37
Configuration of OSD screen .................................................................................................................................... English-37
Basic operation of OSD ............................................................................................................................................. English-38
OSD screen functions .............................................................................................................................................................. English-39
Other functions ........................................................................................................................................................................ English-48
Selecting a video source ........................................................................................................................................... English-48
Picture size ................................................................................................................................................................ English-48
Picture mode ............................................................................................................................................................. English-48
Audio input change ................................................................................................................................................... English-48
OSD information ........................................................................................................................................................ English-48
Control Lock mode .................................................................................................................................................... English-48
Supplemental information of the auto brightness function ..................................................................................... English-49
PIP, POP function ...................................................................................................................................................... English-50
Remote control numbering function ......................................................................................................................... English-51
Troubleshooting ....................................................................................................................................................................... English-52
Specifications .......................................................................................................................................................................... English-53
Pin Assignment ........................................................................................................................................................................ English-54
Please check serious problems mainly.
English-1
My apology is that the red texts is not fixed yet
English
Index
Features
Engineered Specially for Public Display Use with High
Durability and High-level Specifications.
Variable Management Functions Supporting Efficient
Operation and Management
Panel Designed for Heavy Use
Page XX
Highly durable LCD panel for commercial use.
Able to keep displaying crisp, vivid images and endures harsh
environments of various public places such as airports and
stations.
Programmable Scheduling Function
Page 38
The monitor’s operating schedule can be programmed for
up to seven different scheduled time intervals by time, day
of the week and input port. This allows video content from
different inputs to be displayed on certain monitors within the
same installation according to the schedule, and extends the
monitor’s life and saves the power by turning it off during those
hours or days it is not in use.
High Brightness, High Contrast
Page XX
High brightness of 700 cd/m2 and high contrast ratio of 2500:1.
Offers brightness as high as 700 cd/m2 for easy viewing in welllit public places. A high contrast ratio of 2500:1 delivers sharp
images with clear black and white colors, allowing viewers to
read displayed information even from a distance.
Enhanced Display Functionality for Various Commercial
Use. Support for System Configuration Suitable for
Diversified Applications.
6-axis Color Adjustment Function
Page XX
6-axis color adjustment function for adjusting specific colors
only.
You can adjust total six colors of red, green, blue and three
medium colors independently to reproduce skin tones and
colors of company or brand logos accurately in signage
applications.
Digital Zoom
Page XX
Zoom mode for expanding 4:3 image to 16:9.
Various zoom modes are provided and it is possible to expand
4:3 aspect ratio images to 16:9. In addition, you can select the
dynamic display mode to display naturally widened images
with different zooming rates around the screen center and
screen edges. You can also optimally change the image size
diagonally, horizontally, and vertically.
Tiling Capability with Frame compensation
Page 39
Up to 25 panels (5 wide x 5 high) can be combined to create
a single large image (i.e., video wall) or other high-impact
signage. A frame compensation function is incorporated to
compensate the width of panel bezels so that images are
displayed with the utmost accuracy.
PiP, PoP and Side-by-side
Pages 37 and 43
Picture-in-Picture and Picture-out-of-Picture are available when
you want to display video content from a video input source
in the sub picture and display the PC input source in the main
picture, and vice versa.
The native resolution as high as 1920 x 1080 can display
these two input sources in the Side-by-side mode, ideal for
broadcasting and video-conferencing applications.
Equipped with CAT5 Analog Signal Transmission Function.
Supports Max. 150-meter Long Cable.
CAT5 Video Connection
Page XX
Transmitting analog video signal and control signal over a
single CAT5 cable.
You can transmit analog RGB video signal and display control
signal over a single CAT5 cable. Long-distance transmission up
to 150 meters allows flexible installation of the monitors and the
personal computer.
Daisy-chain Connection (CAT5)
Page XX
Linking up to 5 monitors.
You can connect up to 5 monitors in a daisy-chain configuration
using CAT5 cable (max. 200 meters). The monitors can be
installed away from each other depending on the usage.
Screen-saver Functions
Page 40
To reduce image persistence and maximize the panel life in
demanding signage applications, this product is equipped
with four screen-saver functions.
• GAMMA
• COOLING FAN
• BRIGHTNESS
• MOTION
Power-on Delay
Page 39
For installations employing numerous monitors, the poweron delay function can power up the monitors sequentially with
delay between 2-50 seconds after the power is applied. Using
this function can prevent inrush current problems and reduce
the overall electrical load requirements when a single power
supply is used.
Brightness Compensation by the Ambient Light Sensors
for Enhanced Visibility and Lower Power Consumption
Ambient Light Sensors (Brightness sensors)
Page XX
Automatic screen brightness adjustment for enhanced visibility
and lower power consumption.
The ambient light sensors on the front and rear of the monitor
detect not only the light reflected on the front but also that on
the rear to automatically obtain optimum brightness. Besides,
the monitor adjusts its screen brightness according to the
brightness of the displayed images. The screen is always
easy to view in spite of brightness variation in the daytime and
nighttime.
Others
DisplayPort
Page XX
DisplayPort-compliant terminal is provided.
The monitor is equipped with a terminal supporting DisplayPort,
the next generation digital interface standard. You can transmit
video signals over a single cable of max. 15 meters long.
Speakers
Page XX
Special optional speakers can be installed.
The monitor is equipped with 7 W + 7 W speaker output
connectors, through which voice messages, etc. are output
clearly.
Remote Control
Page XX
Special wireless remote control supports major operations and
settings.
The special wireless remote control is supplied for major
controls such as power-on/off, video source switching, and
various settings.
Closed Caption
Page 39
You can display captions.
When closed-caption video signals are input, you can select to
display or hide the captions on the screen.
This monitor is compliant with EIA-608-A.
English-2
Important Information
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc.
Address:
9351 Jeronimo Road,
Irvine, California 92618 U.S.A.
Tel. No.:
+1 - (949) 465-6000
Type of Product:
Computer Monitor
Equipment Classification: Class B Peripheral
Model:
MDT651S (BV928)
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules.
As an International ENERGY STAR Program Participant, Mitsubishi Electric Corporation, has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Windows is a registered trademark of Microsoft Corporation.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
The DisplayPort Icon is a trademark of the Video Electronics Standards Association, registered in the U.S. and other
countries.
All other brands and product names are trademarks or registered trademarks of their respective owners.
Canadian Department of Communications Compliance Statement
DOC:
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2
No. 60950-1.
FCC Information
1. Use the attached specified cables with this equipment so as not to interfere with radio and television reception.
(1) The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,
(2) Please use the supplied shielded video signal cable. Use of other cables and adapters may cause interference with radio and
television reception.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
3. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
English-3
English
DECLARATION OF CONFORMITY
Important Information (continued)
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been
included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION
This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp may be
regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or
the Electronic Industries Alliance: www.eiae.org. (For US only).
English-4
Declaration
We hereby certify that the color monitor MDT651S (BV928)
is in compliance with
Council Directive 2006/95/EC:
— EN 60950-1
Council Directive 2004/108/EC:
— EN 55022
— EN 61000-3-2
— EN 61000-3-3
— EN 55024
and marked with
Mitsubishi Electric Corporation
2-7-3, Marunouchi,
Chiyoda-Ku
Tokyo 100-8310, Japan
Warning
This is a Class A product. In a domestic environment this product may cause radio interference, in which case the
user may be required to take adequate measures.
Declaration of the Manufacturer
Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and
Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and
components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life,
should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the
battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!
English-5
English
Declaration of the Manufacturer
Safety Precautions, Maintenance & Recommended Use
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING
THE LCD COLOR MONITOR:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DO NOT REMOVE MONITOR BACK COVER. There are
no user serviceable parts inside and opening or removing
covers may expose you to dangerous shock hazards or
other risks.
Refer all servicing to qualified service personnel.
Do not spill any liquids into the cabinet or use your monitor
near water.
Do not insert objects of any kind into the cabinet slots,
as they may touch dangerous voltage points, which can
be harmful or fatal or may cause electric shock, fire or
equipment failure.
Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or fire.
Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.
When operating the LCD monitor with its AC 100-120 V
power supply in North America, use a power supply cord
provided with the monitor.
When operating the LCD monitor with its AC 220-240 V
power supply in Europe, use a power supply cord provided
with the monitor.
In UK, use a BS-approved power cord with molded plug
having a black (10 A) fuse installed for use with this monitor.
If a power cord is not supplied with this monitor, please
contact your supplier.
When operating the LCD Monitor with a 220-240 V AC
power supply in Australia, use the power cord provided with
the monitor.
If a power cord is not supplied with this equipment, please
contact your supplier.
For all other cases, use a power cord that matches the AC
voltage of the power outlet and has been approved by and
complies with the safety standard of your particular country.
Do not place any objects onto the monitor and do not use
the monitor outdoors.
The inside of the fluorescent tube located within the LCD
monitor contains mercury. Please follow the bylaws or rules
of your municipality to dispose of the tube properly.
Do not bend power cord.
Do not use monitor in high temperature, humid, dusty, or
oily areas.
If monitor or glass is broken, do not come in contact with
the liquid crystal and handle with care.
If the LCD monitor is damaged and the liquid crystal leaks
out, do not inhale or swallow it.
Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources.
Do not put anything on top of the monitor.
The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet, which is easily
accessible.
Handle with care when transporting. Save packaging for
transporting.
•
Please clean the holes of back cabinet to reject dirt and
dust at least once a year because of set reliability.
If using the cooling fan continuously, it’s recommended to
wipe holes a minimum of once a month.
When installing the remote control batteries;
- Align the batteries according to the (+) and (-) indications
inside the case.
- Align the (-) indication of the batteries first inside the
case.
CAUTION:
Immediately unplug your monitor from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the
monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following
operating instructions.
Recommend Use
CAUTION:
• For optimum performance, allow 20 minutes for warm-up.
• Rest your eyes periodically by focusing on an object at least
5 feet away. Blink often.
• Position the monitor at a 90° angle to windows and other
light sources to minimize glare and reflections.
• Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!
• Adjust the monitor’s brightness, contrast, and sharpness
controls to enhance readability.
• Avoid displaying fixed patterns on the monitor for long
periods of time to avoid image persistence (after image
effects).
• Get regular eye checkups.
Ergonomics
To realize the maximum ergonomic benefits, we recommend
the following:
• Use the preset Size and Position controls with standard
signals.
• Use the preset Color Setting.
• Use non-interlaced signals.
• Do not use primary color blue on a dark background, as
it is difficult to see and may produce eye fatigue due to
insufficient contrast.
English-6
Contents
English
Your LCD monitor (MDT651S) comes with the following:
65" LCD Display Monitor
MODEL
 User’s Manual
 Video Signal Cable
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin Cable)
 LCD Monitor
 CAT5 Tx BOX
*
 CD-ROM
 Clamper x 2
(For preventing disconnection of
the power cord and HDMI cable)
The supplied power cord varies depending on destination.
 Clamper x 2
(For securing the cables)
 Power Cord
For EU
*
 Wireless Remote
Control and AAA
Batteries
 Power Cord
For North America
For the use in the other regions, use a power cord that
matches the AC voltage of the power outlet and has been
approved by and complies with the safety standard of those
regions or countries.
The following components are supplied as option.
• External Speakers
English-7
Parts Name and Functions
Buttons, Switch, and Indicator
Rear
Front
Control buttons
ON
OFF
1 Main Power Switch
5 INPUT button
Switches the main power on/off.
Displays the OSD menu to switch the video input.
You can select [RGB1], [RGB2], [RGB3], [RGB4], [RGB5], [RGB6],
[DVD/HD], [VIDEO<S>], or [VIDEO] using the UP ( ) or DOWN
( ) button.
2 Remote control sensor and Power indicator
Remote control sensor: Receives the signal from the wireless
remote control.
Power indicator:
Indicates the state of the LCD monitor.
• Steady green:
The power is on.
• Steady red:
The power is off.
Some operations such as power-on
are possible.
• Steady green and red: The LCD monitor is in the sleep
mode.
• Off:
The main power is off.
• Steady red and blinking green: The LCD monitor is in the
schedule standby mode.
• Blinking red:
The LCD monitor has an error
(detected by the self-diagnostic
function).
3 POWER button (
)
Switches the power on/off.
This button doesn’t work when the power indicator is off.
Turn on the main power. (See page 24.)
4 MUTE button
Switches the audio mute on/off.
6 PLUS (+) button
Acts as (+) button to increase the adjustment in the OSD menu.
Increases the audio output level when the OSD menu is off.
7 MINUS (-) button
Acts as (-) button to decrease the adjustment in the OSD menu.
Decreases the audio output level when the OSD menu is off.
8 UP (
) button
Activates the OSD menu when the OSD menu is off.
Acts as button to move the highlighted area up to select an
adjustment item in the OSD menu.
9 DOWN (
) button
Activates the OSD menu when the OSD menu is off.
Acts as button to move the highlighted area down to select
an adjustment item in the OSD menu.
10 EXIT button
Activates the OSD menu when the OSD menu is off.
Acts as EXIT button to go back to the previous OSD menu.
11 Brightness sensor (on the front and rear)
Sensor for the auto brightness function.
(Reference) Control Lock mode
You can lock the operation buttons. See page 42.
NOTE:
For details about the OSD menu operation using the buttons, see “Basic operation of OSD.” (See page 33.)
English-8
Parts Name and Functions (continued)
English
Connectors and Terminals
Anti-theft lock slot
You can insert a Kensington
anti-theft lock key.
R L
OUT
IN
OUT
H
V
R B G
Cr/Pr Cb/Pb Y
IN
IN OUT
Main Power
Switch
1 AC IN (3-pin, with earth terminal)
7 VIDEO INPUT/OUTPUT (BNC/S connector)
Connects with the supplied power cord.
Connects with video equipment.
S VIDEO IN: S-video input connector (MINI DIN 4-pin)
VIDEO IN: BNC connector
VIDEO OUT: BNC connector
2 EXTERNAL SPEAKER TERMINAL
Connects with the special stereo speakers (option).
3 LAN connector
Connects with a LAN cord.
4 RS-232C connector (D-SUB 9-pin)
IN connector:
Connects with the RS-232C OUT connector of a computer or
other connected MDT651S.
OUT connector:
Connects with the RS-232C IN connector of other connected
MDT651S.
8 RGB6 IN (DisplayPort)
Connects with the digital video output of a computer, etc.
9 RGB1 IN (HDMI)
Connects with the digital video output of a computer, DVD
player, etc.
10 RGB OUT (MINI D-SUB 15-pin)
Outputs the signal that is supplied to the RGB3 or RGB4 IN
connector.
5 AUDIO IN
11 RGB2 IN (DVI-D)
Connects with the audio output connector of external
equipment such as a computer, VCR, and DVD player.
(a) AUDIO1: ø3.5 stereo mini-jack connector
(b) AUDIO2: RCA connector
(c) AUDIO3: RCA connector
Connects with the digital video output of a computer, etc.
6 AUDIO OUT (RCA)
Outputs the signal that is supplied to the selected AUDIO IN
connector. Connects with an external audio amplifier, etc.
12 RGB3 IN (MINI D-SUB 15-pin)
Connects with the analog video output of a computer, etc.
13 RGB4 IN, DVD/HD IN (BNC)
Connects with the analog video output of a computer or the
component video output of a DVD player, etc.
English-9
Parts Name and Functions (continued)
Wireless Remote Control
8 AUDIO INPUT buttons
Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3],
and [HDMI]. However, note that [VIDEO<S>] and [VIDEO] use
common settings. You can select [HDMI] only when the video
input source is [RGB1].
9 PIP (Picture-in-Picture) buttons
ON/OFF button:
INPUT button:
Switches the PIP or POP mode on/off.
Selects video to be displayed in the sub
picture.
CHANGE button: Changes the main picture with the sub
picture.
[Description]
PIP: Picture-in-Picture
The sub picture is displayed within the main picture.
POP: Picture-out-Picture
The sub picture is displayed to the bottom right of the main
picture.
SIDE BY SIDE
The main picture and the sub picture are displayed side by
side.
NOTE:
When the screen size is [CUSTOM] or [REAL], the PIP and POP
modes don’t work.
1 POWER button
Switches the power on/off.
* When the Power indicator is not glowing, no controls will
work.
10 STILL button
ON/OFF button:
Switches the still picture mode on/off.
CAPTURE button: Captures the new picture.
2 INPUT buttons
Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D),
[RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6]
(DISPLAY PORT), [DVD/HD] (YPbPr), [VIDEO<S>], and [VIDEO].
11 SIZE button
Selects the picture size from [FULL], [NORMAL], [CUSTOM],
[DYNAMIC], and [REAL]. See page 42.
3 PICTURE MODE button
12 MENU button
Selects the picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], and [CINEMA]. See page 26.
HIGHBRIGHT: The brightness is maximized.
STANDARD:
Factory default setting.
sRGB:
Suitable for color matching with sRGBcompliant devices.
CINEMA:
Suitable for viewing movies.
Switches the OSD menu mode on/off.
4 DISPLAY button
Acts as (+) button to increase the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the right.
Displays the screen information. See page 42. When the remote
control mode is LOCK, you can set it back to NORMAL by
holding down the DISPLAY button for at least 5 seconds (see
page 39).
13 UP button (
)
Acts as button to move the highlighted area up to select
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture up.
14 PLUS button (+)
15 EXIT button
Displays the previous OSD menu.
5 SET button
16 DOWN button (
Accepts the settings made in the OSD menu.
Acts as button to move the highlighted area down to select
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture down.
6 MINUS button (-)
Acts as (-) button to decrease the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the left.
)
17 MUTE button
Switches the mute function on/off.
7 AUTO SETUP button
18 VOLUME buttons (VOL)
Displays the auto setup menu. See pages 26 and 35.
Pressing the plus (+) side increases the audio output level.
Pressing the minus (-) side decreases the audio output level.
English-10
Parts Name and Functions (continued)
Operating Range of the Wireless Remote
Control
Installing and removing t he Wireless
remote control batteries
Point the wireless remote control toward the LCD monitor’s
remote control sensor during button operation.
Use the wireless remote control within a distance of about 7 m
from the front of the LCD monitor’s remote control sensor and
at a horizontal and vertical angle of within 30° within a distance
of about 3.5 m.
The wireless remote control is powered by 1.5 V AAA batteries.
How to install the batteries
1. Unlock and pull up the cover in the arrow’s direction.
2. Align the batteries according to the (+) and (-) indications
inside the case.
3. Replace the cover.
How to remove the batteries
1. Unlock and pull up the cover in the arrow’s direction.
2. Remove the batteries.
CAUTION:
The remote control system may not function when direct
sunlight or strong illumination strikes the remote control sensor
of the LCD monitor, or when there is an object in the path.
CAUTION:
Incorrect use of batteries can result in leaks or explosion.
Be careful especially about the following points.
• Place “AAA” batteries matching the (+) and (-) signs on each
battery to the (+) and (-) signs of battery compartment.
• Do not mix battery types.
• Do not combine new batteries with used ones. It causes
shorter battery life or leakage of batteries.
• Remove dead batteries immediately to prevent battery
liquid from leaking into the battery compartment. Don’t
touch exposed battery acid because it causes damage to
your skin.
Handling the wireless remote control
*
*
*
*
Do not subject to strong shock.
Do not allow water or other liquid to splash on the wireless
remote control. If the wireless remote control gets wet, wipe
it dry immediately.
Avoid exposure to heat and steam.
Other than to install the batteries, do not open the wireless
remote control.
NOTE:
If you do not use the wireless remote control for a long period,
remove the batteries.
English-11
English
How to Use the Wireless Remote Control
Parts Name and Functions (continued)
CAT5 Tx BOX
Front
Rear
1 USB (B type)
Connector for receiving the power supplied from the USB
device such as the computer. By connecting a USB cable, you
can control the CAT5 Tx BOX using the control commands
transmitted over the USB cable.
CAUTION:
We have checked that the power is supplied and the control
commands are transmitted properly via the USB connector
by connecting it with our computers according to the USB
standards.
When the CAT5 Tx BOX is combined with your computer
system or USB hub system, check in advance that it operates
properly.
2 EXTERNAL CONTROL (MINI D-SUB 9-pin)
When the communication via the USB connector is unusable,
this connector can be used for RS-232C communication with
the control device such as the computer.
NOTE:
RS-232C connection isn’t necessary when the COM port
number set by the USB driver is used. Make selection using the
input select switch (USB/RS-232C) ( 5 ), as necessary.
8 Auxiliary power supply input connector (DC IN
5 V)
Though the power is supplied from the above-mentioned
USB connector, an auxiliary DC power adopter (commercially
available) is also available. When +5 V (according to the product
specifications) is supplied from the above-mentioned DC power
adapter, the power supply is automatically switched from the
USB connector. (You cannot use both at the same time.)
CAUTION:
• Don’t apply a voltage out of the specified range to the
auxiliary power supply input connector or connect it with
incorrect polarity. If you do so, the connected devices may
be overheated or damaged.
• The auxiliary power supply input connector isn’t intended
for general use. Commercial DC power connectors are
available in different shapes. When you want to use this
connector, consult a qualified electrician or your dealer in
advance.
Power connector type: DC jack R/A type (Diameter of the
center pin: 2.0 mm)
Pin
3 RGB IN (MINI D-SUB 15-pin)
Connector for receiving the analog RGB video signal from the
computer.
4 RGB OUT (MINI D-SUB 15-pin)
Video connector for buffering and outputting the analog RGB
video signal received by the RGB IN connector ( 3 ).
5 Input select switch (USB/RS-232C)
Switches the control input between the USB connector and the
RS-232C connector.
6 CAT5 OUT (Modular connector 8-pin)
Connector for converting and outputting the video signal
received by the RGB IN connector ( 3 ) and the control signal
transmitted via the USB connector ( 1 ) or the RS-232C
connector ( 2 ) to transmit them on the CAT5 long cable.
CAUTION:
Never connect network devices to the CAT5 IN and OUT
connectors. If you do so, they may adversely affect with each
other, causing breakdown.
7 Composite sync signal level switch
Switches the composite sync signal level.
The TTL level and the 0.3 V level are switched.
English-12
Name
Definition
1
+5 V
DC Power source
2
GND
GND
2
1
Preparation for use
P-1
Preparation for installation
- Determine the installation location
- Ventilation requirements for enclosure mounting
Page 14
Carry out as necessary
P-2
Installing the monitor
- Using the wall mount or ceiling mount
- Installing in the portrait position
Pages 15 to 16
Carry out as necessary
P-3
P-4
Installing the optional speakers
Connection procedure
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo amplifier
Page 16
Pages 17 to 21
Carry out as necessary
P-5
Connecting CAT5
- CAT5 for long-distance connection or multiple-monitor connection
Page 16
Carry out as necessary
P-6
Connecting RS-232C
- Monitor control via RS-232C
Page 16
Carry out as necessary
P-7
P-8
Connecting LAN
- Monitor connection using LAN
Connecting the power cord to the monitor
- Connecting the power source
The monitor is ready for use.
How to Use
Page 23
English-13
Page 16
Page 22
English
Flow of preparation
P-1
Preparation for installation
Install the monitor on a wall or ceiling strong enough to
support its weight where the screen is easy to view, using
commercially available wall or ceiling mount brackets.
Ventilation requirements for enclosure mounting
To allow heat to disperse, leave space around the monitor as
shown in the figure below.
Determine the installation location
CAUTION:
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY
YOURSELF.
Installing your LCD monitor must be done by a qualified
technician. Contact your dealer for more information.
Don’t block these holes.
CAUTION:
MOVING OR INSTALLING THE LCD MONITOR MUST BE
DONE BY THREE OR MORE PEOPLE.
Failure to follow this caution may result in injury if the LCD
monitor falls.
CAUTION:
Do not mount or operate the monitor upside down, face up, or
face down.
IMPORTANT:
Lay the protective sheet, which was wrapped around the LCD
monitor when it was packaged, beneath the LCD monitor so as
not to scratch the panel.
CAUTION:
Don’t block the holes in the rear of the monitor shown in the
figure above. If they are blocked, heat accumulates inside the
monitor, causing breakdown. The upper limit of the operationguaranteed ambient temperature when the monitor is installed
in the landscape position is 40˚C. When installing the monitor
in a case or an enclosure, ensure adequate ventilation to keep
the temperature inside the case 40˚C or lower by providing
a cooling fan or ventilation holes in the case. The upper limit
when the monitor is in the portrait position is 35˚C.
This LCD has a temperature sensor and cooling fan. If the LCD
becomes hot, the cooling fan will turn on automatically. If the
LCD becomes overheated, the “Caution” menu will appear.
If the “Caution” menu appears, stop using the monitor and
allow it to cool. When the LCD monitor is used in an enclosure
or with protection on LCD surface, please check the inside
temperature of the monitor by “HEAT STATUS” (See page 40). If
the temperature is higher than the normal level, set “COOLING
FAN” to ON using the SCREEN SAVER function (See page 40).
English-14
Installing the monitor
Lay the screen face down
Lay the protective sheet on a table, which was wrapped around
the monitor when it was packaged, beneath the screen surface
so as not to scratch the screen surface.
Failure to follow the correct mounting procedures can result
in damage to the equipment or injury to the user or installer.
Product warranty does not cover damage caused by improper
installation.
Failure to follow these recommendations can void your
warranty.
Use M8 screws (having a length 15 mm longer than the
thickness of the mounting bracket) and tighten them securely.
Prevent the screws from loosening using spring washers, etc.
MITSUBISHI ELECTRIC recommends using mounting interface
that comply with TÜV-GS and/or UL1678 standard in North
America.
200
200
Table
Protective Sheet
436.5
Handles
200
CAUTION:
Portrait position is available only when the monitor is wallmounted or ceiling-mounted.
The stands (legs) can not be fitted to the monitor in the portrait
position.
Placing the monitor in the portrait position will shorten the
average life of the LCD backlight.
Operation Environment (Temperature) shall be limited, as
shown below:
Operation Environment:
Temperature 5 - 35°C / 41 - 95°F
Humidity
20 - 80% (without condensation)
Place the monitor in the position shown below.
Do not place the monitor in landscape in any other manner than
shown.
(SP-521S) can not be attached when the
Optional speakers (SP-422V)
LCD monitor is installed in the portrait position.
749
200
Conditions:
MDT651S can be installed in the portrait position, under the
following conditions:
How to set-up
” logo should be on the LEFT side when
The “
viewed from the front of the monitor.
436.5
749
Installing in the portrait position
Landscape
(mm)
90°
Portrait
CAUTION:
For preventing the monitor from falling.
• Install the monitor with metal brackets for wall or
ceiling installation (commercially available) on your own
responsibility. For detailed procedures of installation, refer
to the instructions of the metal brackets.
• To lessen the probability of injury and damage resulting
from fall of the monitor in case of earthquake or other
disaster, be sure to consult the bracket manufacturer for
installation location.
• To lessen the risk of falling of the monitor, thread
commercially available rope through the handles at the
right and left of the monitor and secure the rope to the wall
mount brackets or ceiling mount brackets.
• Do not sleep where the monitor may topple over or fall in
case of an earthquake or other disaster.
logo
English-15
Clockwise
English
Using the wall mount or ceiling mount
Carry out as necessary
Portrait
P-2
P-3
Installing the optional speakers
Carry out as necessary
Before connecting the signal cable to PC and Video
• Optional speakers can be installed.
• Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.
How to install the optional speakers
1. Use the metal fittings and screws supplied with the optional speakers.
For the installation procedure, see the setup guide of the speakers.
2. Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).
Left speaker
Right speaker
SPEAKER (S)(L)
SPEAKER (S)(R)
Black(-)
Black(-)
Red(+)
Red(+)
Red(+)/Black(-)
Red(+)/Black(-)
To speaker terminal (L)
To speaker terminal (R)
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
CAUTION:
Do not move the monitor with the speakers installed.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
English-16
Connection procedure
Before making connections
• First turn off the power of all the connected equipment before making connections.
• Refer to the user manual of each piece of equipment.
NOTE:
Please use the audio cable without resistance when the audio output terminal of the audio device and PC is stereo mini-Jack.
When the audio cable with resistance is used, the audio level may not be increased or no audio may be output.
Wiring diagram
LCD monitor (rear)
Personal computer
(DVI-D, HDMI, DisplayPort)
LCD monitor (first monitor)
Stereo amplifier
DVD player or HD disk
player (HDMI, BNC)
LCD monitor (second monitor)
Personal
computer
(Analog RGB)
External speakers
VCR (RCA)
Prevention of disconnection of HDMI cable
When you connect the HDMI cable to the connector on the monitor, in order to prevent accidental disconnection of the cable, you
are recommended to secure it using the supplied clamper as shown in the figure.
Clamper
Clamper
English-17
English
P-4
P-4
Connection procedure (continued)
Connecting with a computer (analog connection)
Analog connection:
• Connection via RGB3 IN (D-SUB) connector
(1) Connect a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (accessory) to the RGB3 IN connector.
(2) Select [RGB3] using the INPUT button on the monitor or the D-SUB button on the wireless remote control.
• Connection via RGB4 IN (BNC: R•G•B•H•V, or R•G•B•Csync, RGB sync on green) connector
(1) Use a BNC cable (BNC x 5 - BNC x 5) (commercially available) to connect the BNC connector on the PC, and use a signal
cable (mini D-SUB 15-pin - BNC x 5) (commercially available) to connect the mini D-SUB 15-pin connector on the PC.
(2) Select [RGB4] using the INPUT button on the monitor or the BNC button on the wireless remote control.
NOTE:
When RGB4 IN is used, the power management function for VESA DPM of the PC input doesn’t work, but that for the video input
works instead. See page XX.
Second monitor connection:
• Connect the RGB OUT connector (mini D-SUB 15-pin) on the first monitor and the RGB3 IN connector (mini D-SUB 15-pin)
on the second monitor using a signal cable (mini D-SUB 15-pin - mini D-SUB 15-pin) (an accessory of the second monitor or
commercially available).
(The RGB3 or RGB4 signal selected by the first monitor is output. The RGB1 or RGB2 signal isn’t output.)
Audio connection:
• Connect an audio cable (ø3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
• To output audio to the second monitor:
Connect the AUDIO OUT connector on the first monitor and the AUDIO IN2 or 3 connector on the second monitor using an audio
cable (RCA) (commercially available).
Personal computer
(Analog RGB)
Rear of LCD monitor (first monitor)
To BNC output
BNC cable
(BNC x 5 to BNC x 5)
To D-SUB output
Signal cable
(Mini D-SUB 15-pin to Mini
D-SUB 15-pin)
To audio output
Audio cable
(ø 3.5 mm stereo mini)
RGB4 IN (R,G,B,H,V)
RGB3 IN (D-SUB)
AUDIO IN1 (mini)
AUDIO OUT (RCA)
LCD monitor (second monitor)
(Multi-connection)
Audio cable (RCA)
Signal cable
(Mini D-SUB 15-pin to Mini
D-SUB 15-pin)
RGB OUT (D-SUB)
RGB3 IN (D-SUB)
AUDIO IN2 (RCA)
English-18
Connection procedure (continued)
The monitor automatically distinguishes the timings shown in the table below and sets the screen information. When a PC or other
device is connected, it automatically displays images properly. See the page describing AUTO SETUP/AUTO ADJUST.
<Factory preset timing>
Resolution
1
2
3
4
5
640 x 480
800 x 600
1024 x 768
1280 x 768
1360 x 768
Frequency
Horizontal Vertical
31.5 kHz
60 Hz
37.9 kHz
60 Hz
48.4 kHz
60 Hz
48.0 kHz
60 Hz
47.7 kHz
60 Hz
Remarks
Resolution
6
7
8
9
1280 x 1024
1600 x 1200
1920 x 1080
1920 x 1200
Frequency
Remarks
Horizontal Vertical
64.0 kHz
60 Hz
75.0 kHz
60 Hz
67.5 kHz
60 Hz Recommend timing
74.0 kHz
60 Hz
NOTE:
When a signal other than 1920x1080 is input, characters may be blurred and figures and objects may be distorted.
Images may not be displayed correctly depending on the video card or driver being used.
Connecting with a computer (digital connection)
Digital connection:
• Connection via the RGB1 IN connector (HDMI)
(1) Connect an HDMI cable (commercially available) to the RGB1 IN connector.
(2) Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
• Connection via the RGB2 IN connector (DVI-D)
(1) Connect a DVI-D cable (commercially available) to the RGB2 IN connector.
(2) Select [RGB2] using the INPUT button on the monitor or the DVI-D button on the wireless remote control.
• Connection via the RGB6 IN connector (DisplayPort)
(1) Connect a DisplayPort cable (commercially available) to the RGB6 IN connector.
(2) Select [RGB6] using the INPUT button on the monitor or the DISPLAY PORT button on the wireless remote control.
Audio connection:
• Connect an audio cable (ø3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
When an HDMI cable is connected, select HDMI audio.
(You can select HDMI only when the video input is [RGB1].)
Personal computer
(DVI-D, HDMI)
Rear of LCD monitor (first monitor)
To DVI-D output
DVI-D cable
Audio output
Audio cable
(ø3.5 mm stereo mini)
AUDIO IN1 (mini)
To DP output
To HDMI output
RGB2 IN (DVI-D)
RGB6 IN (DP)
DisplayPort cable
RGB1 IN (HDMI)
HDMI cable
English-19
English
P-4
P-4
Connection procedure (continued)
Connecting a video device (component video/HDMI device)
This monitor can be connected to a video device equipped with component output such as a DVD player.
Refer to the user’s manual of the connected device for details. (Cables shown in the figure below are commercially available.)
• To connect a DVD player equipped with component output to the DVD/HD IN connector (YPbPr or YCbCr) on the monitor, use a
BNC cable (BNC x 3 – BNC x 3) and a BNC-RCA adaptor (commercially available), or a signal cable (BNC x 3 – D connector).
Select [DVD/HD] using the INPUT button on the monitor or the YPbPr button on the wireless remote control.
• To make audio connection, connect an audio cable (RCA) to the AUDIO IN2 connector or the AUDIO IN3 connector.
Select [AUDIO2] or [AUDIO3] using the AUDIO INPUT buttons on the wireless remote control.
• To connect a DVD player equipped with HDMI output to the RGB1 IN connector (HDMI) on the monitor, use an HDMI signal
cable.
Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
• For HDMI cable connection, select HDMI audio.
(You can select HDMI audio only when the video input is [RGB1].)
LCD monitor (rear)
DVD player
(HDMI device)
To HDMI output
HDMI cable
RGB1 IN (HDMI)
DVD player
(component device)
AUDIO IN2 (RCA)
Audio output
Audio cable (RCA)
BNC cable
(BNC x 3 to BNC x 3)
To video output
DVD/HD IN
(Y·Pb·Pr, Y·Cb·Cr)
BNC-RCA adaptor
To D connector output
DVD/HD IN
(Y·Pb·Pr, Y·Cb·Cr)
Signal cable
(BNC x 3 to D connector)
English-20
P-4
Connection procedure (continued)
This monitor can be connected to a stereo amplifier.
Refer to the user’s manual of the stereo amplifier for details. (Cables shown in the figure below are commercially available.)
• To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video
cable. For connection to the audio input connector on the monitor, use an audio cable (RCA). Connect the connectors of the
audio cable (RCA) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the monitor
or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>] using the
INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.
• When connecting a stereo amplifier to the monitor, be sure to turn off the power of the stereo amplifier. For connection to the
audio output connector on the monitor, use an audio cable (RCA). Connect the connectors of the audio cable (RCA) correctly. Be
sure to turn on the monitor first, and then turn on the stereo amplifier.
• The selected audio input signal is output from the AUDIO OUT connector.
Video device
(composite video/S video device)
To video output
BNC cable
VIDEO IN
Rear of LDC monitor (first monitor)
To S video output
S video cable
S-VIDEO IN
Audio cable (RCA)
To Audio output
AUDIO IN2
Audio cable (RCA)
To Audio input
AUDIO OUT
Stereo amplifier
VIDEO OUT
External speakers
BNC cable
VIDEO IN
English-21
LCD monitor (second monitor)
(Multi-connection)
English
Connecting a video device (composite video/S video device)/stereo amplifier
P-5
Connecting CAT5
CAT5 for long-distance connection
or multiple-monitor connection
The CAT5 video connection function is for transmitting the
analog RGB video signal of the computer and the control signal
of the monitor over a long distance using CAT5 cables. The
computer can control the monitor via the supplied CAT5 Tx
BOX.
2. Connection of the CAT5 video
connection function
There are two cases of connection.
1) Connection to one monitor
Computer
To connect the computer and the CAT5 Tx BOX via USB
interface, it is necessary to install the USB driver to the
computer from the CD-ROM supplied with the monitor.
(When connecting the computer and the CAT5 Tx BOX via
RS-232C interface, you don’t have to install the USB driver.)
OS supported: Windows® XP, Windows Vista®
How to install:
1) Installation to Windows® XP
Start the “PL2303-Driver_XP2K_v
******.exe” file in the
Windows XP folder on the CD-ROM supplied with the monitor
and install the driver according to the instructions displayed on
the screen.
USB cable (commercially available)
CAT5 cable (commercially available)
CAT5 Tx BOX
(accessory)
Monitor
CAUTION:
Never connect network devices (such as a hub and a computer
for LAN) to the CAT5 Tx BOX and the IN and OUT connectors
of the monitor. If they are connected, the network devices
themselves, CAT5 Tx BOX, and monitor may be damaged.
1. Installation of the USB driver for CAT5
serial communication control
Carry out as necessary
Signal cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin)
(accessory)
1. Connect the USB connector of the supplied CAT5 Tx BOX
and that of the computer using a commercially available
USB cable. (When the USB driver isn’t available, connect an
RS-232C cable in addition to the USB cable. In this case,
the RS-232C cable serves for supplying the power to the
CAT5 Tx BOX.) See page 35.
2. Connect the RGB input connector (Mini D-SUB 15-pin) of
the CAT5 Tx BOX and the D-SUB output connector of the
computer using the signal cable (Mini D-SUB 15-pin to Mini
D-SUB 15-pin) supplied with the monitor.
3. Connect the CAT5 output connector (Modular connector
8-pin) of the CAT5 Tx BOX and the IN connector of the
RGB5/CAT5 input/output connector (Modular connector
8-pin) of the monitor using a commercially available CAT5
cable.
2) Connection to multiple monitors
Computer
2) Installation to Windows Vista®
Start the “PL2303_Prolific_Vista_
******.exe” file in the
Windows VISTA folder on the CD-ROM supplied with the
monitor and install the driver according to the instructions
displayed on the screen.
USB cable (commercially available)
CAT5 cable (commercially available)
CAT5 Tx BOX
(accessory)
Monitor
(first monitor)
NOTE:
It is unnecessary to install the USB driver if you don’t use the
communication control or the USB driver. When the window
asking you to install the driver is displayed, select cancel.
As for the latest driver for the Windows operating system,
check the operation of the interface IC “PL-2203” in advance,
referring to the website of Prolific Technology Inc. Prolific
Technology Inc. and Mitsubishi don’t assume any responsibility
or liability for any damages incurred by the user.
Operation check by Mitsubishi
• File name: PL2303_Prolific_DriverInstaller_v110.zip, Release
date: December 2, 2009, Version: V1.1.0
Windows XP (32 bits): Operated
Windows Vista (32 bits): Operated
Windows 7 (32 bits): Operated
Signal cable (Mini D-SUB
15-pin to Mini D-SUB 15-pin)
(accessory)
Monitor
(second monitor)
CAT5 cable (commercially available)
1. In addition to the connection described in 2-1), connect the
OUT connector of the RGB5/CAT5 input/output connector
(Modular connector 8-pin) of the first monitor and the
IN connector of the RGB5/CAT5 input/output connector
(Modular connector 8-pin) of the second monitor using a
commercially available CAT5 cable.
2. Connect the third and later monitors in the same way.
You can connect up to 5 monitors.
Allowable cable length
Connection
Max. cable length/signal timing
One monitor
150 m / 1920 x 1080 @60 Hz
Multiple monitors
200 m / 1920 x 1080 @60 Hz
(Total length of the connected cables)
English-22
Connecting CAT5 (continued)
The lengths given above are based on the actual measurements
using our standard signal source and the recommended cable
as follows. Before installation, check the monitor operation in
advance by connecting it with your computer and cables.
Recommended cable:
8-pin modular connector, straight-through, shielded, Category
5 or 5e
3. Various settings involved in the CAT5
video connection
In the case of the CAT5 video connection, configure the
following settings displayed on the OSD screen. (See page 29.)
1) CAT5 CABLE LENGTH
Select the cable length, and the defaults of all the adjustment
values are automatically determined.
Select the length that is closest to the actual length of your
cable.
2) CAT5 EQ
Make adjustment so that blur and smear of the displayed letters
and graphic objects are minimized.
3) CAT5 R-GAIN/G-GAIN/B-GAIN
When the displayed image is dark, increase each value.
When whites aren’t displayed as intended, adjust the R-GAIN
and B-GAIN values.
4) CAT5 R-SKEW/G-SKEW/B-SKEW
Adjust each value so that the color deviation in the displayed
letters and graphic objects is minimized.
English-23
Carry out as necessary
English
P-5
P-6
Connecting RS-232C
Carry out as necessary
Monitor control via RS-232C
By connecting multiple LCD monitors and a computer using RS-232C cables (commercially available) or CAT5 cables (commercially
available), you can control the monitors from the computer via the supplied CAT5 Tx BOX for the following operations:
•
•
Power ON or OFF
Switching between input signals
Connection
Connection by RS-232C (For RS-232C cable (commercially available), the reverse type cable should be used.)
Rear of LCD monitor (first monitor)
Rear of LCD monitor (second monitor)
Computer
(RS-232C connection)
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C
RS-232C cable
•
•
RS-232C cable
Before making connections, turn off the personal computer and the monitors.
Start the personal computer first, and then turn on the monitors. (Otherwise, the com port may be unusable.)
CAUTION:
Never connect network devices to the CAT5 IN and OUT connectors. If you do so, they may adversely affect with each other,
causing breakdown.
NOTE:
If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required.
Contact your dealer for details.
English-24
P-7
Connecting LAN
Carry out as necessary
By connecting the monitor and the computer using a LAN cable (commercially available), you can control the following functions
from the computer.
•
•
Power ON or OFF
Switching between input signals
Rear of LCD monitor (first monitor)
Computer
(LAN connection)
LAN
LAN cable
LAN hub
LAN hub
LAN cable
LAN
English-25
English
Monitor connection using LAN
P-8
Connecting the power cord to the monitor
Connecting the power source
•
•
The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
Fully insert the prongs into the power outlet socket.
Loose connection may cause noise.
NOTE:
Please refer to “Safety Precautions, Maintenance & Recommended Use” in this manual for proper selection of the AC power cord.
Use the clamper to prevent accidental disconnection of the power cord.
Clamper
Cable holder
Clamper
Power cord (For EU)
Power cord (For North America)
English-26
How to Use
U-1
Turning on all the connected devices
Page 24
U-2
Selecting the video input
Page 25
U-3
Controlling the external devices
Page 26
U-4
Selecting the OSD language
Page 26
RGB3, RGB4, and RGB5 only
U-5
Auto-setup
Page 26
U-6
Selecting the picture mode
Page 26
U-7
Screen adjustment
Page 27
U-8
Picture adjustment
Page 27
Carry out as necessary
U-9
Volume control
U-10
Schedule setting
Pages 28 to 29
U-11
Remote control
Pages 30 to 31
Page 28
English-27
English
Flow of How to Using
U-1
Turning on all the connected devices
Power Indicator
Turning on external devices
1. Turn on the connected devices such as
the computer and VCR.
Before turning on the monitor, turn on the computer.
Turning on the monitor
Status
Power ON
Power OFF
Power Standby when
“SCHEDULE” is enable
Power Standby
Diagnosis (Detecting failure)
LED
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting on page 44.
2. Turn on the Main Power Switch.
The power indicator turns on green.
The control buttons on the rear of the monitor and the
wireless remote control don’t work while the Main Power
Switch is off (the power indicator is off).
When using them, check that the Main Power Switch is on
(the power indicator is on).
3. When the power indicator glows
red, press the POWER button on the
monitor.
Power button
Main Power Switch
The power indicator turns green.
Power Management Function
This function reduces the power consumption of the monitor
when the keyboard or the mouse is not used for a fixed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and
the power indicator glows green and red.
This function is available only when a computer equipped
with the VESA-approved DPM Power Management function is
connected to the monitor.
Check that the power management function (power saver) for
RGB is ON.
When you turn on this function for VIDEO, the monitor goes into
the sleep mode in 10 minutes after RGB4, DVD/HD, VIDEO<S>,
or VIDEO sync signal is lost.
or
[Description]
DPM: Acronym for Display Power Management
NOTE:
The default power management settings (power savers) for
RGB and VIDEO are ON.
Power button
Wireless remote
control
English-28
U-2 Selecting the video input
 Select using the INPUT buttons on the wireless remote control.
You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control.
Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6] (DISPLAY
PORT), [DVD/HD] (YPbPr), [VIDEO<S>], and [VIDEO].
 Select using the INPUT button on the monitor.
When you press the INPUT button on the monitor, the video input OSD menu is displayed and you can select the video input
using the and buttons.
Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6] (DISPLAY
PORT), [DVD/HD], [VIDEO-S], and [VIDEO].
NOTE:
The selection you make doesn’t complete unless you press the INPUT button while the OSD information is displayed. See page
XX.
RGB1
RGB2
RGB3
RGB4
RGB5
RGB6
DVD/HD
VIDEO-S
VIDEO
INPUT button
Video input OSD menu
Select using the
English-29
and
buttons.
English
You can select the desired video input using the wireless remote control or the INPUT button on the monitor.
U-3 Controlling the external devices
You can control the externally connected devices to display images supplied from them.
VCR, etc.
Personal computer
U-4 Selecting the OSD language
Select the OSD language using LANGUAGE in the CONFIGURATION1 menu of the OSD screen function. See page XX.
English-30
U-5 Auto-setup
Analog inputs only
English
The AUTO SETUP button on the wireless remote control or AUTO SETUP in the OSD menu automatically adjusts the screen size,
horizontal/vertical position, clock, clock phase, white level, and black level.
NOTE:
The auto setup works on RGB3, RGB4, and RGB5 only.
U-6 Selecting the picture mode
Using the PICTURE MODE button on the wireless remote control, you can select the picture mode suitable for images to be
displayed.
HIGHBRIGHT:
STANDARD:
sRGB:
CINEMA:
The brightness is maximized.
Factory default setting.
Suitable for color matching with sRGB-compliant devices.
Suitable for viewing movies.
English-31
U-7
Screen adjustment
When images aren’t displayed properly even after the auto setup, you can alternatively adjust the screen by pressing the MENU
button on the wireless remote control or the control buttons on the rear of the monitor to display the OSD menu. Using the SCREEN
settings in the OSD menu, you can adjust the horizontal/vertical position, clock, clock phase, zoom mode, CUSTOM ZOOM,
horizontal resolution, and vertical resolution.
NOTE:
The position adjustment works on RGB3, RGB4, DVD/HD, VIDEO<S>, and VIDEO only.
The clock adjustment and the resolution adjustment work on RGB3 and RGB4 only.
The zoom adjustment works on all video inputs.
U-8 Picture adjustment
You can adjust the picture by pressing the MENU button on the wireless remote control or the control buttons on the rear of the
monitor to display the OSD menu.
Using the PICTURE settings in the OSD menu, you can adjust picture settings such as the brightness, contrast, and sharpness.
English-32
Carry out as necessary
When outputting audio from the option stereo speakers, you can control the volume level using the VOL button on the wireless
remote control.
In addition, you can adjust the volume by pressing the MENU button on the wireless remote control or the control buttons on the
rear of the monitor to display the OSD menu. Using the AUDIO settings in the OSD menu, you can adjust the balance, treble, and
bass.
Volume
control
Displaying
the OSD
menu
U-10 Schedule setting
Carry out as necessary
You can program the power-on/off and input selection using the SCHEDULE setting in the OSD menu that is displayed by pressing
the MENU button on the wireless remote control or the control buttons on the rear of the monitor.
English-33
English
U-9 Volume control
U-10 Schedule setting (continued)
Carry out as necessary
How to set up schedule
Check box
Radio button
When the cursor is on any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, pressing the UP
( ) or DOWN ( ) button moves the cursor vertically and pressing the PLUS (+) or MINUS (-) buttons moves it horizontally.
By pressing the SET button, you can select or deselect the check boxes.
Check box:
When the check box is selected, the program is enabled. When it is cleared, the program is disabled.
When the SCHEDULE screen is closed, the programs you made become enabled and will be executed at the
specified times.
When the cursor is on any item of the schedule settings in the white frame, pressing the PLUS (+) button moves it to the right and
pressing the MINUS (-) button moves it to the left.
You can set the power-on/off time and video input by pressing the UP ( ) or DOWN ( ) button. You can select or deselect the
radio buttons by pressing the SET button.
ON:
Set the time when the power is turned on. If you don’t want to set the power-on time, enter “--.”
OFF:
Set the time when the power is turned off. If you don’t want to set to the power-off time, enter “--.”
INPUT:
Set the video input to be selected when the power is turned on. If you want to select the vide input that was
selected before the power is turned on, enter “--.”
EVERY DAY:
Select this option to execute the schedule every day. When you select EVERY DAY, you cannot select any days
of the week and EVERY WEEK.
MON - SUN:
Select the days of the week on which you want to execute the schedule. Unless you select EVERY WEEK, too,
the selection of the days of the week is cleared after the schedule is executed one time.
EVERY WEEK: Select this option to execute the schedule on the selected days of the week, every week.
NOTE:
• Before making the schedule settings, be sure to check the current date and time using “DATE AND TIME.”
• When you close the SCHEDULE screen, the settings are saved.
• When two or more schedules are enabled, they are executed in descending order of the program number, and the power is
turned off upon completion of the last executed schedule.
• When there are two or more schedules having the same power-on/off time, the one having the largest program number is
executed.
• You cannot set the power-on time and the power-off time to the same time.
• When OFF TIMER is ON, the schedule settings are ignored.
English-34
U-11 Remote control
Carry out as necessary
By connecting multiple LCD monitors and a computer using RS-232C cables (commercially available) or CAT5 cables (commercially
available), you can control the monitors from the computer via the supplied CAT5 Tx BOX for the following operations:
•
•
•
•
Power ON or OFF
Switching between input signals
Volume control and mute
Auto setup
Connection
Connection by RS-232C (For RS-232C cable (commercially available), the reverse type cable should be used.)
Monitor
To RS-232C
connector IN
PC
Monitor
To RS-232C
connector OUT
RS-232C cable
To RS-232C
connector IN
To RS-232C
connector OUT
RS-232C cable
Connection by CAT5 RS-485 (For CAT5 cable (commercially available), the straight type cable should be used)
Type A
Type B
CAT5 Tx BOX
(accessory)
Monitor
USB cable
To RS-232C
connector IN
To CAT5
connector OUT
PC
To CAT5 RGB5
connector IN
CAT5 cable
RS-232C cable
Monitor
To CAT5 RGB5
connector OUT
To CAT5 RGB5
connector IN
To CAT5 RGB5
connector OUT
CAT5 cable
* This connection isn’t necessary
when the USB COM port is used.
•
•
Before making connections, turn off the personal computer and the monitors.
Start the personal computer first, and then turn on the monitors. (Otherwise, the com port may be unusable.)
NOTE:
For connection with a 25-pin serial port connector on the computer, a conversion adapter (commercially available) is required.
1) Interface
PROTOCOL
RS-232C/RS-485 (CAT5)
BAUD RATE
9600 [bps]
DATA LENGTH
8 [bit]
PARITY BIT
NONE
STOP BIT
1 [bit]
FLOW CONTROL
NONE
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
CAT5 Tx BOX uses RXD, TXD, DTR, and GND lines for RS-485 control with RS-232C connector.
English-35
English
RS-232C/RS-485 Remote control
U-11 Remote control (continued)
Carry out as necessary
2) Control command diagram
The command is structured by the address code, function code, data code and end code. The length of the command is
different for each function.
NOTE:
This example shows a basic command that is used when a single computer and a single monitor are connected.
When you want to connect multiple monitors or perform complicated control using other commands than the basic commands,
contact your dealer for advanced command specifications.
Address code
Function code
Data code
End code
HEX
30h 30h
Function
Data
0Dh
ASCII
‘0’ ‘0’
Function
Data
[Address code]
[Function code]
[Data code]
[End code]
30h 30h (ASCII code, ‘0’ ‘0’), fixed.
Code unique to each control function.
Data unique to each control function (Not always indicated by numerical values.)
0Dh (In ASCII code, ‘ ’) fixed.
3) Control sequence
(1) A command is sent from the computer to the monitor. (Commands should be sent at intervals of at least 600 ms.)
(2) The monitor sends a return command within 600 ms* after receiving and encoding the command. If the monitor fails to
receive the command, it doesn’t send any return command.
(3) The computer checks the return command to see that the command it sent was executed or not.
(4) The monitor sends various codes other than the return code. While RS-232C control sequence is in progress, reject other
codes on the personal computer side.
*: Transmission of the return command may be delayed during signal switchover, etc.
Example: Turn the power ON (‘ ’ is for ASCII code)
Command from computer Command from monitor
30 30 21 0D
‘0’ ‘0’ ‘!’ ‘ ’
30 30 21 0D
‘0’ ‘0’ ‘!’ ‘ ’
Detail of command
Command for POWER ON
Command received
(Command echoed back)
4) Operation commands
The operation commands configure the basic operation settings of this LCD monitor. The commands may not work during signal
switchover.
The operation commands have no data codes.
Operation
POWER ON
•
•
•
ASCII
HEX
!
21h
POWER OFF
"
22h
INPUT RGB 1
_r1
5Fh 72h 31h
INPUT RGB 2
_r2
5Fh 72h 32h
INPUT RGB 3
_r3
5Fh 72h 33h
INPUT RGB 4
_r4
5Fh 72h 34h
INPUT RGB 5
_r5
5Fh 72h 35h
INPUT RGB 6
_r6
5Fh 72h 36h
INPUT VIDEO
_v1
5Fh 76h 31h
INPUT DVD/HD
_v2
5Fh 76h 32h
INPUT S-VIDEO
_v3
5Fh 76h 33h
VOLUME UP
r06
72h 30h 36h
VOLUME DOWN
r07
72h 30h 37h
MUTE
ra6
72h 61h 36h
AUTO SETUP
r09
72h 30h 39h
POWER OFF command should be operated over 1 minute after the power is turned on.
POWER ON command should be operated over 1 minute after the power is turned off.
After sending any of the video input selection commands, wait for at least 10 seconds to send the next command.
English-36
U-11 Remote control (continued)
5) Read command
The computer sends the command without datacode to the monitor.
After receiving this command, the monitor returns the command with datacode including the current status to the computer.
Example: When the computer asks the power status of the monitor, and the status of the monitor is powered-on.
Command from computer
30 30 76 50 0D ‘0’‘0’‘v’‘P’[enter]
Command from monitor
30 30 76 50 31 0D ‘0’‘0’‘v’‘P’‘1’[enter]
Detail of command
Ask about the power status of the monitor.
Monitor is powered-on.
Structure of the Read-command
Function
POWER
Input
Internal
temperature
ON
OFF (stand by)
RGB-1 (HDMI)
RGB-2 (DVI-D)
RGB-3 (D-SUB)
RGB-4 (BNC)
RGB-5 (CAT5)
RGB-6 (DISPLAY PORT)
Video
DVD/HD
S-VIDEO
Around the main Resolution
board
1˚C
Around the power Resolution
supply
1˚C
vP
vP
vI
vI
vI
vI
vI
vI
vI
vI
vI
ASCII
Data (Receive)
1
0
r1
r2
r3
r4
r5
r6
v1
v2
v3
Function
76 50
76 50
76 49
76 49
76 49
76 49
76 49
76 49
76 49
76 49
76 49
HEX
Data (Receive)
31
30
72 31
72 32
72 33
72 34
72 35
72 36
76 31
76 32
76 33
tc1
(ex.) +25
74 63 31
2B 20 32 35
tc2
(ex.) +31
74 63 32
2B 20 33 31
LAN Remote control
By connecting the monitor and the computer using a network device such as a LAN hub as shown in Section P-7 and making
the network settings using the OSD menu and RS-232C communication control, you can perform remote control using the same
commands as those for RS-232C.
1. Setting procedure
(1) Set the following network parameters using the OSD menu. (See page 45.)
• ON/OFF, IP address, subnet mask, gateway mask setting, and default gateway of DHCP client
(2) Send the same control command as that for RS-232C via TCP/IP socket communication.
(3) Check the status sent from the monitor. When it is received successfully, the setting is completed.
English-37
English
Carry out as necessary
Configuration and basic operation of OSD screen
Configuration of OSD screen
This monitor is equipped with the OSD (On Screen Display) function for easy screen adjustment. The OSD function allows you to
control the menus displayed on the screen for brightness setting and other settings.
The OSD screen is configured as shown below.
Main Menu Screen
Main menu
Icons other than the one you selected are grayed out.
PICTURE
Page 34
CONFIGURATION1
Page 38
SCREEN
Page 35
CONFIGURATION2
Page 39
AUDIO
Page 36
ADVANCED OPTION
Page 41
PIP
Page 37
Sub menu (Adjustment items)
Adjustment items are displayed.
Adjustment status
The values adjusted by the wireless remote control and the
PLUS and MINUS buttons on the monitor are displayed.
Operation buttons (Key guide)
Buttons for controlling the displayed OSD menu are displayed.
Sub menu screen
When you select a sub menu, an OSD screen is displayed.
Sub menus contain information screens, adjustment menu screens, and selection menu screens as shown below.
Sub menu screen: Picture reset (for example)
English-38
Specifications
Orientation
Landscape / Portrait
31.2
31.2
1436
811
873
Dimension (Unit: mm)
LCD Module
Screen size (diagonal)
Panel Type
Panel Pitch
Resolution
Color
Brightness (typ.)
Contrast ratio
Viewing Angle (CR>=10)
Response time
65” (1639mm)
VA
0.744 mm
1920 x 1080 pixels (Full HD)
Approximately 1.06 Billion
700 cd/m2
2500 : 1
Up/Down 178° , Left/Right 178°
8 ms (Gray to Gray)
1428.5 mm x 803.5 mm ( 56.2” x 31.6”)
VESA DPM
VESA DDC2B, DDC/CI
Contrast, Position, Phase, Clock
Brightness, Contrast, Black level, PIP, Screen saver, Side border color,
Gamma selection, Black level expansion, Heat status, Power on delay,
Schedule, Tiling, CAT5 control, Auto Brightness, Closed Caption, etc.
Viewing Area
Power Management
Plug and Play
Auto Adjustment
OSD user functions
Input Connector
PC Input / Output
(Analog)
(Digital)
Output Connector
Horizontal Frequency
Vertical Frequency
Video Signal
Sync Signal
Supported Resolution
Input / Output
Signal
Input Connector
AV Input / Output
(Analog)
(Digital)
Output Connector
Supported Resolution
Audio Input / Output
Input Connector
Output Connector
External Speaker Output
Control Input /
Output
Input Connector
Output Connector
Input Voltage / Current
Power Supply
Power Consumption
Power Consumption at Power Saving
Temperature
Operation
Environment
Humidity
Temperature
Storage
Environment
Humidity
Net (without stand)
Dimension
(W x H x D)
Gross
Net (without stand)
Weight
Gross
Wall mounting interface
Regulation/Guideline compliance
(Analog)
(Digital)
MINI D-SUB 15-pin, BNC (R, G, B, H, V) (PC/AV Common), Modular 8-pin(CAT5)
HDMI (PC/AV Common), DVI-D (HDCP supported, PC/AV Common),DisplayPort
MINI D-SUB 15-pin (PC/AV Common) Modular 8-pin(CAT5)
15.625/15.734, 31.5 kHz - 91.1 kHz
50.0/58.0 Hz - 85.0 Hz
Analog: Analog RGB, Digital: TMDS (with HDCP)
Analog: Separate (TTL), Sync on Green, Digital: TMDS
640 x 480, 800 x 600, 1024 x 768, 1280 x 768, 1360 x 768, 1280 x 1024,
1600 x 1200, 1920 x 1080, 1920 x 1200
(1600 x 1200, 1920 x 1200 Simplified Compression)
Composite <BNC>, Separate (Y/C) <S-TERMINAL>,
Component (Y/Pb/Pr) <BNC> (PC/AV Common)
HDMI (PC/AV Common), DVI-D (HDCP supported, PC/AV Common)
Analog: Composite <BNC>, MINI D-SUB 15-pin (PC/AV Common)
Composite/Separate: NTSC, PAL, SECAM, 4.43 NTSC, PAL60
Component/Digital: 480i, 480p, 576i, 576p, 1080i, 720p, 1080p
RCA pin-jack L/R x 2, Stereo mini jack
HDMI (digital audio)
RCA pin-jack
Speaker Ja(L/R), 7W + 7W (8 ohm)
RS-232C <D-SUB 9-pin>, CAT5 <Modular 8-pin> (PC/Control Common),
LAN <Modular 8-pin>
RS-232C <D-SUB 9-pin>, CAT5 <Modular 8-pin> (PC/Control Common)
4.9 A - 2.0 A @AC100 - 240 V, 50/60 Hz
487 W (467W without speaker)
Less than 2 W, Mechanical Power SW off: 0 W
5 - 40°C / 41 - 104°F (Landscape Mode), 5 - 35°C / 41 - 95°F (Portrait Mode)
20 - 80% (without condensation)
-20 - 60°C / -4 - 140°F
10 - 90% (Without condensation) / 90%-3.5% x (Temp-40 °C) regarding over 40 °C
1498 x 873 x 139mm (59.0 x 34.4 x 5.5”)
1774 x 1200 x 375mm (69.8 x 47.2) x 14.8”)
Approximately 47.7 kg / 104.9 lbs
Approximately 54.4 kg / 121.9 lbs
8-M8 Screws holes (200mm (7.9”) pitches) for Monitor mount
UL60950-1 / C-UL / EN60950-1 / CE / BSMI / GOST-R / FCC-B / DOC-B /
EN55022-A / EN55024 / EN61000-3-2 / EN61000-3-3 / C-Tick / RoHS / US Mercury
NOTE: Technical specifications are subject to change without notice.
English-55
English
139
76
60
1498
OSD screen functions
PICTURE

BRIGHTNESS
RED
You can adjust the brightness.
Press the PLUS (+) button to increase the brightness. Press
the MINUS (-) button to decrease the brightness.

CONTRAST
MAGENTA
YELLOW
BLUE
You can adjust the contrast.
Adjust the contrast using the PLUS (+) or MINUS (-) button to
obtain a desired result.

GREEN
SHARPNESS
You can adjust the sharpness.
Press the PLUS (+) button to make the image look sharper.
Press the MINUS (-) button to make the image look softer.
NOTE: If you increase the sharpness setting value too
much, lines may appear double. In such a case,
decrease the sharpness setting value.


BLACK LEVEL
NOISE REDUCTION
* For the VIDEO<S> and VIDEO inputs only.
You can adjust the noise reduction level.
Press the PLUS (+) button to increase the value to lessen
the noise.


COLOR TEMPERATURE
You can adjust the color temperature.
The image becomes reddish as the color temperature
decreases, and it becomes bluish as the color temperature
increases.
NOTE: This adjustment doesn’t work in the sRGB picture
mode.
TINT
* For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs
only.
When you select TINT by pressing the SET button on the
wireless remote control, the TINT screen appears and you
can adjust the following.
[TINT]:
You can adjust all the colors at the same time. Press the
PLUS (+) button to add a green tint. Press the MINUS (-)
button to add a purple tint.
[RED], [MAGENTA], [BLUE], [CYAN], [GREEN], or [YELLOW]:
You can adjust each color individually. Press the PLUS (+)
button to shift the selected color to the right around the
color circle. Press the MINUS (-) button to shift the selected
color to the left around the color circle.
Color circle
COLOR
* For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs
only.
When you select COLOR by pressing the SET button on the
wireless remote control, the COLOR screen appears and
you can adjust the following.
[COLOR]:
You can adjust all the colors at the same time. Press the
PLUS (+) button to deepen the colors. Press the MINUS (-)
button to lighten the colors.
[RED], [MAGENTA], [BLUE], [CYAN], [GREEN], or [YELLOW]:
You can adjust each color individually. Press the PLUS (+)
button to deepen the selected color. Press the MINUS (-)
button to lighten the selected color.
NOTE: This adjustment doesn’t work in the sRGB picture
mode.
You can adjust the brightness in the dark area of the image.
Press the PLUS (+) button to brighten dark areas in the
image. Press the MINUS (-) button to further darken the
dark area of the image.
NOTE: This adjustment doesn’t work in the sRGB picture
mode.

CYAN

COLOR CONTROL
The color levels of red, green, and blue are adjusted by the
color bars.
R: Red, G: Green, B: Blue

English-40
GAMMA SELECTION
You can select the gamma mode from NATIVE, S GAMMA,
2.2, 2.4 and OPTION.
NOTE: GAMMA is fixed to 2.2 in the sRGB picture mode.
OSD screen functions (continued)
AUTO BRIGHTNESS
This function controls the screen brightness depending on
the ambient light for easy viewing.
In addition, it changes the screen brightness depending on
the ambient light and what are displayed on the screen to
reduce power consumption as low as possible.
[AUTO BRIGHTNESS]
LOCAL: The auto brightness function is enabled.
REMOTE: The auto brightness function is enabled.
In addition, the monitor enters the
intercommunication mode where multiple
monitors are controlled collectively. (See page
33.)
OFF:
This function is disabled.
[CONTROL]
PRIMARY:
Select this setting to configure the monitor
as Master when controlling multiple
monitors collectively.
SECONDARY: Select this setting to use the monitor
alone or to configure the monitor as
Slave when controlling multiple monitors
collectively.
[LIGHT FROM BACK]
YES: Select this setting when there is a light source
such lighting equipment and a window behind the
monitor.
NO: Select this setting when there is no light source
such lighting equipment and a window behind the
monitor.
[BACK WALL]
Select the following settings according to the distance
between the rear of the monitor and the wall or window.
FAR: The distance is 5 meters or longer.
NEAR: The distance is 5 meters or shorter.
[FRONT SENSOR]
Select ON for normal use.
OFF: Select this setting when the sensor on the front
panel is shielded.
[REAR SENSOR]
Select ON for normal use.
OFF: Select this setting when the sensor on the rear
panel is shielded.
[SATURATION]
ON: The image saturation is adjusted depending on the
ambient light.
OFF: Image saturation isn’t adjusted.
[VIDEO DETECT]
ON: The screen brightness varies depending on what
are displayed on the screen to reduce power
consumption of the monitor.
OFF: The screen brightness doesn’t vary and the power
consumption isn’t reduced.

PICTURE RESET
You can reset all the PICTURE settings to the factory
defaults.
English-41
English

OSD screen functions (continued)
SCREEN


H POSITION
You can adjust the horizontal image position.
Press the PLUS (+) button to move the image to the right.
Press the MINUS (-) button to move the image to the left.

V POSITION
You can adjust the vertical image position.
Press the PLUS (+) button to move the image up. Press the
MINUS (-) button to move the image down.

CLOCK
* For the RGB3 and RGB4 inputs only.
You can adjust the image size of the computer and eliminate
blurred letters.
Press the PLUS (+) button to expand the width of the image
on the screen to the right. Press the MINUS (-) button to
narrow the width of the image on the screen to the left.


CLOCK PHASE

ZOOM MODE
You can select the mode to stretch the image to fit it to the
screen.
For the RGB1, RGB2, RGB3, RGB4, RGB5, and RGB6
inputs, you can select FULL, NORMAL, CUSTOM, or REAL.
For DVD/HD, VIDEO<S>, and VIDEO, you can select FULL,
NORMAL, DYNAMIC, CUSTOM, or REAL.
FULL:
The image is stretched to fill the screen
regardless of its aspect ratio.
NORMAL: The image is stretched vertically to the full
height of the screen while keeping the aspect
ratio.
DYNAMIC: The image is stretched to fill the screen with
different magnifications at the screen center
and the screen edges.
CUSTOM: You can stretch the image horizontally and
vertically as you desire using the CUSTOM
ZOOM setting.
REAL:
The image is displayed without being stretched
or reduced.
NOTE: In the DYNAMIC mode, the top and the bottom of
the image may be cropped. Full HD images are
displayed as in the FULL mode.
H RESOLUTION
* For the RGB3 and RGB4 inputs only.
Use this setting when AUTO SETUP and AUTO ADJUST
cannot obtain the horizontal resolution of the image
supplied from an external device.
Press the PLUS (+) button to increase the resolution. Press
the MINUS (-) button to decrease the resolution.
* For the RGB3 and RGB4 inputs only.
You can adjust the level of the periodic variation of the
screen flicker.

CUSTOM ZOOM
CUSTOM ZOOM becomes selectable when you set ZOOM
MODE to CUSTOM.
ZOOM:
You can expand the horizontal and vertical
sizes simultaneously.
H ZOOM:
You can expand the horizontal size only.
V ZOOM:
You can expand the vertical size only.
H POSITION: Pressing the PLUS (+) button moves the
image to the right. Pressing the MINUS (-)
button moves the image to the left.
V POSITION: Pressing the PLUS (+) button moves the
image up. Pressing the MINUS (-) button
moves the image down.
V RESOLUTION
* For the RGB3 and RGB4 inputs only.
Use this setting when AUTO SETUP and AUTO ADJUST
cannot obtain the vertical resolution of the image supplied
from an external device.
Press the PLUS (+) button to increase the resolution. Press
the MINUS (-) button to decrease the resolution.

English-42
SCREEN RESET
You can reset all the SCREEN settings to the factory
defaults.
OSD screen functions (continued)
English
AUDIO

BALANCE
You can adjust the balance of the right and left volumes.
Press the PLUS (+) button to decrease the left volume.
Press the MINUS (-) button to decrease the right volume.

TREBLE
You can adjust the high frequency sound.
Press the PLUS (+) button to increase the treble sound.
Press the MINUS (-) button to decrease the treble sound.

BASS
You can adjust the low frequency sound.
Press the PLUS (+) button to increase the bass sound.
Press the MINUS (-) button to decrease the bass sound.

AUDIO RESET
You can reset all the AUDIO settings to the factory defaults.
English-43
OSD screen functions (continued)
PIP (PICTURE IN PICTURE)
NOTE:
The PIP and POP functions don’t work in the CUSTOM and
REAL picture size modes.
Refer to “PIP, POP function” for details. (See page 43.)


PIP MODE
You can select the PIP mode from PIP, POP, SBS ASPECT,
SBS FULL, and OFF using the PLUS (+) and MINUS (-)
buttons. See page 43.
PIP
POP
SBS ASPECT
SBS FULL
OFF
* SBS: SIDE BY SIDE

PIP SIZE
You can select the size of the sub picture displayed in the
PIP mode.
You can move the sub picture by pressing the UP ( ),
DOWN ( ), PLUS (+), and MINUS (-) buttons.

PIP AUDIO
You can select the audio output in the PIP mode.
When MAIN is selected, audio of the main picture is output.
When SUB is selected, audio of the sub picture is output.

PIP H POSITION
You can adjust the horizontal position of the sub screen.
Press the PLUS (+) button to move the sub screen to the
right. Press the MINUS (-) button to move the sub screen to
the left.

PIP V POSITION
You can adjust the vertical position of the sub screen.
Press the PLUS (+) button to move the sub screen up. Press
the MINUS (-) button to move the sub screen down.

SUB INPUT
You can select the video input for the sub screen from
HDMI (RGB1), DVI-D (RGB2), D-SUB (RGB3), RGB4, DVD/
HD, VIDEO<S>, and VIDEO.
English-44
PIP RESET
You can reset all the PIP settings to the factory defaults.
OSD screen functions (continued)
English
CONFIGURATION1

AUTO SETUP
Enlarged
* For the RGB3 and RGB4 inputs only.
Press the SET button to automatically adjust the screen
size, horizontal position, vertical position, clock, clock
phase, white level, and black level.

The portion (shaded part) outside the
display area isn’t displayed.
AUTO ADJUST
Motion
* For the RGB3 and RGB4 inputs only.
When AUTO ADJUST is ON, the horizontal position, vertical
position, and clock phase are automatically adjusted at the
time of the timing switching.

POWER SAVE
90%

LANGUAGE
OSD control menus are available in eight languages.
(English, German, Spanish, French, Italian, Swedish,
Chinese, and Japanese)


SCREEN SAVER
You can set the SCREEN SAVER functions to reduce the
risk of “image persistence.”
GAMMA:
When you select ON, the gamma mode where image
persistence is difficult to occur is used.
COOLING FAN:
When you select ON, the cooling fan always runs.
When you select AUTO, the built-in fan automatically starts
running according to the operating temperature.
BRIGHTNESS:
When you select ON, the brightness decreases.
MOTION:
The screen slightly moves horizontally and vertically
at regular intervals to reduce the effect of the image
persistence.
NOTE: When you select a time period in the MOTION
setting, the monitor enlarges the image and moves it
horizontally and vertically. The portions of the image
out of the display area aren’t visible.
To make the entire image visible all the time, arrange
it to fit within 90% of the screen area at the center.
COLOR SYSTEM
* For the VIDEO<S> and VIDEO inputs only.
You can select the color system depending on the video
device you use.
AUTO:
NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is
automatically selected.
NTSC:
NTSC
PAL:
PAL
SECAM:
SECAM
4.43NTSC: 4.43 NTSC
PAL-60:
PAL60
NOTE: When you use a video device purchased from
overseas, set the COLOR SYSTEM menu.
When you select ON, the power management function
(power save) is activated.
When the RGB1, RGB2, RGB3, or RGB4 input is selected,
the monitor goes into the sleep mode in several seconds
after the sync signal is lost.
When the DVD/HD or VIDEO input is selected, the monitor
goes into the sleep mode in about 10 minutes after the input
signal is lost.

Move
SIDE BORDER COLOR
You can adjust the brightness of the black areas displayed
on both sides of 4:3 images.

CONFIGURATION RESET
You can reset all the CONFIGURATION1 settings to the
factory defaults.
Note that you cannot reset the setting of DATE AND TIME.

English-45
FACTORY RESET
You can reset all the settings of PICTURE, SCREEN, AUDIO,
CONFIGURATION1, CONFIGURATION2, and ADVANCED
OPTION to the factory defaults.
Note that you cannot reset the settings of LANGUAGE and
DATE AND TIME.
OSD screen functions (continued)
CONFIGURATION2


CAT5 CONTROL
[CAT5 CABLE LENGTH]
Select the cable length, and the defaults of all the
adjustment values are automatically determined.
Select the length that is closest to the actual length of your
cable.
[CAT5 EQ]
Make adjustment so that blur and smear of the displayed
letters and graphic objects are minimized.
[CAT5 R-GAIN, G-GAIN, B-GAIN]
When the displayed image is dark, increase each value.
When whites aren’t displayed as intended, adjust the
R-GAIN and B-GAIN values.
NOTE: Before performing the color adjustment described
above, check the TINT settings on page 37.



OSD V POSITION
You can adjust the vertical position of the OSD menu.

OSD ROTATION
The OSD screen is rotated.
SERIAL CONTROL

H FLIP
V FLIP
Horizontally
rotated
Vertically
rotated
INFORMATION OSD
You can enable and disable the information OSD display.
The display time is selectable from 1 to 10 seconds.
NOTE: The information OSD display shows a message
when the input source is switched, the input signal
state is changed, or the input signal has an error.
RS485 TERMINATION
Turn ON or OFF the termination resistance of the RS-485
interface.
ON: Select this setting to use the monitor alone or to
configure the monitor as the one at the end of the
connection when more than one monitor is multiconnected.
OFF: Select this setting to configure the monitor as other
than the one at the end of the connection when more
than one monitor is multi-connected.

OSD H POSITION
You can adjust the horizontal position of the OSD menu.
OFF
Select the communication interface (RS-232C or RS-485)
for the serial communication function.
For connection of the signal cable, see page 35.

OSD TURN OFF
The OSD control menu will stay on as long as it is used.
The preset choices are 5 -120 seconds.
[CAT5 R-SKEW, G-SKEW, B-SKEW]
Adjust each value so that the color deviation in the
displayed letters and graphic objects is minimized.

MONITOR ID
ID numbers for wireless remote control are assigned to
MDT651S monitors that are multi-connected via RS-232C.
ID numbers 1 to 26 are selectable.

LAN SETTING
DHCP CLIENT
Select whether to use DHCP (-) client or not.
Select OFF when not using it, and select ON when using
it.
IP ADDRESS
Set the IP address of the monitor.
SUBNET MASK
Set the gateway mask.
Set it to 255.255.255.0 for normal use.
DEFAULT GATEWAY
Set the IP address of the gateway router to externally
connect the local area including the monitor.
RESET
LAN settings are reset.
English-46
OFF TIMER
You can select the OFF TIMER mode.
Select the time period to automatically turn off the power
from 1 to 24 hours.
NOTE: When OFF TIMER is enabled, the SCHEDULE
settings (see page 29) will be disabled.
OSD screen functions (continued)
SCHEDULE
You can program the LCD monitor operation schedules. (See
page 29.)
< HOW TO SETUP SCHEDULE >
Using the “SCHEDULE” function allows you to set up to
seven different scheduled time intervals when the LCD
Monitor will be activated.
You can select the time the monitor turns on and turns off,
the day of week the monitor is activated, and which input
source the monitor will use for each scheduled activation
period. A check mark in the box next to the number of the
schedule indicates that the selected schedule is in effect.
To select which schedule to set, use the up/down arrows to
move the number (1 to 7) of the schedule.
Use the (+) and (-) buttons to move the cursor horizontally
within the particular schedule. Use the and buttons
to increase the time and select the input port. The “SET”
button is used to make a selection.
If you create a schedule but do not want to set the power
on time, select “--” in the “ON” time slot.
If you do not want to use a power off time select “--” in the
“OFF” time slot.
If there is no input selected (“--” showing in the input spot)
the input from the previous schedule will be used.
The selection of EVERY DAY within a schedule takes priority
over other schedules that are set up to operate weekly.
When schedules are overlapping, scheduled Power ON time
has priority over scheduled Power OFF time.
If there are two schedules programmed for the same time,
then the highest numbered schedule has priority.
When OFF TIMER is enabled, the “SCHEDULE” settings are
disabled.

DATE AND TIME
You can adjust the current date and time for the internal
clock.
You must set this item when using SCHEDULE.
After competing the setting, be sure to press the SET
button (button 5 on page 10).

MONITOR INFORMATION
The model name and the serial number of your monitor are
displayed.
English-47
English

OSD screen functions (continued)
ADVANCED OPTION


INPUT RESOLUTION
* For the RGB3 and RGB4 inputs only.
You can select the following resolutions according to
the input signal: AUTO, 1024x768, 1280x768, 1360x768,
1400x1050, 1680x1050, 1600x1200, and 1920x1200. AUTO
selects the resolution automatically.
The setting you select becomes effective when POWER is
turned OFF and ON again.

BLACK LEVEL EXPANSION
Selects a level of black expansion from “OFF”, “MIDDLE”
and “HIGH.”
In case of go under the black cut-off level, please adjust the
“Black level” in moderation on OSD menu.

INPUT CHANGE

SCAN MODE
* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO
inputs only.
You can select the image display area.
OVERSCAN: About 95% of the input image is displayed.
UNDERSCAN: Almost 100% of the input image is
displayed.

SCAN CONVERSION
* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO
inputs only.
You can select the IP conversion mode.
PROGRESSIVE: Interlace signals are converted into
progressive signals. Select this setting for
normal cases.
INTERLACE:
Interlace signals are displayed without
being converted. Though this setting is
suitable for motion images, still images
aren’t displayed properly.

TILING
You can enlarge an image across multiple screens.
A single large screen can be configured with up to 25
monitors. You can also divide the displayed image into up
to 5 pieces horizontally and vertically.
NOTE: It is required to connect the same video signal to
each monitor via a distributor or RGB OUT.
When TILING is activated, PIP, POP, SBS, and STILL
are disabled.
TILING doesn’t work in the REAL picture size mode.
H MONITORS: Select the number of images obtained by
horizontal division.
V MONITORS: Select the number of images obtained by
vertical division.
POSITION:
Select the area you want to enlarge.
FRAME COMP.: When displaying an image across multiple
monitors, you can select the mode to
compensate for the bezel widths for
smooth and natural display.
ENABLE:
When you select ON, the image in the
selected area is enlarged on the screen.
You can select the time for input switching from QUICK and
NORMAL.
NOTE: When you select QUICK, slight noise may appear.

IR CONTROL
You can lock the wireless remote control.
Select from the following two modes using the
and
buttons and then determine the selected mode by pressing
the SET button.
NORMAL: All the remote control operations are enabled.
LOCK:
All the remote control operations are disabled.
NOTE: When you hold down the DISPLAY button on the
wireless remote control for at least 5 seconds, the
NORMAL mode is activated.
You can lock the wireless remote control
independently from the control buttons on the rear
of the monitor. See page 42.

FILM MODE
You can select the film mode function.
AUTO: Images of 24 frames per second are detected,
subjected to interpolation, and then displayed.
OFF: The input video signals are displayed without being
subjected to any processing.
NOTE: When FILM MODE is AUTO, set SCAN CONVERSION
to PROGRESSIVE. See page 41.
English-48
HEAT STATUS
The statuses of the cooling fan, brightness, and internal
temperature are displayed.
NOTE: The cooling fan starts running according to the
operating temperature or when COOLING FAN is
ON in the SCREEN SAVER menu.
When the operating temperature substantially
exceeds the operation guaranteed range, the
message “TEMPERATURE WARNING!!” is displayed
on the screen.
OSD screen functions (continued)
POWER ON DELAY
You can adjust the delayed time until the power-on mode
is activated at the time of recovery from the sleep mode or
power-on.
The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30,
40, and 50 seconds.

TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI)
or RGB2 (DVI-D) signal according to their signal format
depending on their source device.
DVI-MODE:
Select this setting when displaying the RGB2 (DVI-D) signal.
Select DVI-PC when the source device is a PC.
Select DVI-HD when the source device is a video
device.
HDMI SIGNAL:
Select this setting when displaying the RGB1 (HDMI) signal.
Select LIMITED when displaying the signal that uses 16
to 235 levels of 256 levels for each of R, G, and B.
Select FULL when displaying the signal that uses all 256
levels (from level 0 to 255).

DDC/CI
Use to turn ON or OFF the DDC/CI communication function.
Select ON for normal use.

SYNC TYPE
Select “0.3V” for 0.3 Composite Sync.
Select “TTL” for TTL Sync.

CLOSED CAPTION
You can select to display or hide captions.
OFF:
Captions are hidden.
CC1:
Captions are displayed in sync with the
primary audio.
CC2:
Information (related to the primary
audio) is displayed without sync.
CC3:
Captions are displayed in sync with the
secondary audio.
CC4:
Information (related to the secondary
audio) is displayed without sync.
TT1/TT2/TT3/TT4: Four types of information not related to
the displayed images are displayed. (For
example, news and weather forecast.)
NOTE: Check with each supplier of your video software and
external video devices in advance whether they are
compliant with EIA-608-A.
If their video signals are not compliant with it,
images may not be displayed correctly.

ADVANCED OPTION RESET
Selecting ADVANCED OPTION RESET allows you to reset
all OSD settings from ADVANCED OPTION settings, except
for DATE AND TIME, SCHEDULE, HDMI INPUT MODE, DVI
INPUT MODE, MONITOR ID, and DDC/CI.
English-49
English

Other functions
Picture size
Audio input change
RGB1, 2, 3, 4
FULL
NORMAL
CUSTOM
REAL
DVD/HD
FULL
NORMAL
DYNAMIC
CUSTOM
REAL
VIDEO, VIDEO<S>
FULL
NORMAL
DYNAMIC
CUSTOM
REAL
NORMAL
AUDIO2
Other inputs
AUDIO1
AUDIO2
AUDIO3
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
SIZE : FULL
DYNAMIC
Current selection (RGB2)
Resolution
Horizontal/vertical frequency
Audio input mode
Picture size mode
FULL
Recommend
picture size
DVD/HD
* DVD/HD, VIDEO only
NORMAL:
AUDIO3
RGB1, 2, 3, 4
Normal size of
each signal
NORMAL
AUDIO1
OSD information
NORMAL
(Squeeze signal)
NORMAL
RGB1
HDMI
Images supplied from external devices such
as PC and DVD fit the screen, keeping their
original aspect ratio.
FULL:
Images are displayed on the entire screen.
4:3 images are enlarged on the entire
DYNAMIC:
screen with non-linearity. (Round images
may be cut when enlarged.)
CUSTOM (ZOOM): You can enlarge the displayed images
beyond the active display area. The portions
of the image out of the display area aren’t
visible.
REAL:
Images are displayed in their original sizes.
Current selection (DVD/HD)
Audio input mode
Picture size mode
DVD/HD
AUDIO : 3
SIZE : FULL
VIDEO<S>, VIDEO
Current selection (VIDEO<S>)
Color system mode
Audio input mode
Picture size mode
VIDEO<S>
NTSC
AUDIO : 3
SIZE : NORMAL
ZOOM
PIP, POP
Main : RGB2
Sub : VIDEO<S>
ZOOM
Picture mode
RGB1, 2, 3, 4
HIGHBRIGHT
STANDARD
DVD/HD, VIDEO, VIDEO<S>
HIGHBRIGHT
STANDARD
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
VIDEO<S>
NTSC
SIZE : FULL
sRGB
CINEMA
Main picture information
Audio input mode
Sub picture information
Main picture size
Control Lock mode
You can lock the operation buttons so that the image
adjustments you made aren’t changed even when the buttons
are pressed.
By holding down both the and button on the monitor for 3
seconds or longer, you can lock the operation buttons.
By holding down both the and button on the monitor for 3
seconds or longer again, you can unlock the operation buttons.
English-50
Other functions (continued)
To control multiple monitors collectively
In such a case where the tiling function is used, you can control the auto brightness function by sharing the detection result of the
brightness sensor of a certain monitor among the connected monitors.
1. Multi-connect the monitors using RS-232C or CAT5 cables separately sold as shown by the example below.
Monitor
ID = 9
(Slave)
Monitor
ID = 8
(Slave)
Monitor
ID = 7
(Slave)
Monitor
ID = 6
(Slave)
Monitor
ID = 5
(Slave)
Monitor
ID = 4
(Slave)
Monitor
ID = 3
(Slave)
Monitor
ID = 2
(Slave)
Monitor
ID = 1
(Master)
Master: Monitor configured as Master that detects the
outside light (Monitor ID is “1”.)
Slave: Monitor controlled by the Master monitor (Monitor
ID is other than “1”.)
2. Assign a monitor ID to each multi-connected MDT651S using MONITOR ID. (See page 31.)
Monitor ID is selectable from 1 to 26.
The monitor ID of the Master monitor should be “1” and those of the Slave monitors should be other than “1”.
You are recommended to assign IDs to the monitors consecutively from 1, 2, 3, and on.
3. Set AUTO BRIGHTNESS on the OSD screen (PICTURE) as follows.
AUTO BRIGHTNESS
CONTROL
Master monitor
LOCAL
PRIMARY
Slave monitors
REMOTE
SECONDARY
4. For connection with CAT5, set [RS485 TERMINATION] of the master monitor and the slave monitor at the end to ON. Set [RS485
TERMINATION] of the other slave monitors to OFF. See page XX.
To use a computer to control the monitors
When using a computer to control the monitors, you must prepare an application software program for control by yourself.
1. Connect the RS-232C IN connector of the Master monitor shown above and the RS-232C connector of the computer using an
RS-232C cable.
Or, using a CAT5 cable, connect the RS-232C connector of the computer to the CAT5 IN connector of the Master monitor via the
CAT5 Tx BOX.
2. Assign a monitor ID to each multi-connected MDT651S using MONITOR ID. (See step 2 on page 33.)
3. Set AUTO BRIGHTNESS on the OSD screen (PICTURE) as follows.
AUTO BRIGHTNESS
CONTROL
Master monitor
REMOTE
SECONDARY
Slave monitors
REMOTE
SECONDARY
4. For connection with CAT5, set [RS485 TERMINATION] of the master monitor and the slave monitors to ON. However, set [RS485
TERMINATION] of the slave monitor at the end to OFF. See page XX.
5. For the specifications of the communication commands, contact your dealer.
NOTE:
When using CAT5 for control only, you can connect up to 26 monitors. When using the video function together, you are
recommended to connect only 5 or less monitors due to the restrictions of the video function. See page XX.
English-51
English
Supplemental information of the auto brightness function
Other functions (continued)
PIP, POP function
The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes
do not function when the screen size is “CUSTOM” or “REAL”.
Sub screen
RGB1
(HDMI)
×
×
RGB3 (D-SUB)
×
RGB4 (BNC)
×
RGB5 (CAT5)
×
RGB6 (DISPLAY PORT)
×
DVD/HD (YPbPr)
×
VIDEO<S>

VIDEO

 : Supported
RGB1 (HDMI)
RGB2 (DVI-D)
Main screen
RGB2
(DVI-D)
×
×
×
×
×
×
×


RGB3
(D-SUB)
RGB4
(BNC)
×
×
×
×
×
×
×
×
×
×
×
×
×
×




× : Not supported
RGB5
(CAT5)
×
×
×
×
×
×
×


RGB6
(DISPLAY
PORT)
×
×
×
×
×
×
×


DVD/HD
(YPbPr)
VIDEO<S>
VIDEO
×
×
×
×
×
×
×









×
×







×
×
By pressing the PIP ON/OFF button on the wireless remote control, you can change the PIP, POP, and SIDE BY SIDE modes in the
order shown below.
Alternatively, you can change the modes using the PIP MODE setting of PIP in the OSD main menu. See page 37.
PIP
POP
SIDE BY SIDE
ASPECT
SIDE BY SIDE
FULL
OFF
[Reference]
The resolutions in the PIP and POP modes are as follows:
PIP SIZE
< SMALL >
: 320 pixels X 240 pixels
< MIDDLE >
: 480 pixels X 320 pixels
< LARGE >
: 640 pixels X 480 pixels
POP SIZE
: 450 pixels X 338 pixels
NOTE:
Images displayed in the sub picture always fit the PIP sizes shown above irrespective of the aspect ratio of the input image.
English-52
Other functions (continued)
By connecting multiple MDT651S monitors using RS-232C cables, you can control any one monitor or all the monitors by one
remote controller.
1. Assign arbitrary ID number to each of multi-connected MDT651S monitors using MONITOR ID.
ID numbers 1 to 26 are selectable.
It is recommended to assign sequential ID numbers from 1 and up.
2. The remote control mode of the first MDT651S monitor is set to PRIMARY and those of the other monitors are set to
SECONDARY.
3. When you direct the remote controller at the remote control signal sensor of the PRIMARY monitor and press the DISPLAY
button on the remote controller, the ID selection OSD appears at the upper left of the screen.
ID:1
ID No. :2
ID number of the currently viewed monitor
Select the ID number of the monitor you want to control using the +/- button on the remote controller.
The ID of the monitor you want to control is displayed at the upper left of its screen.
By selecting ALL, you can control all the multi-connected monitors.
4. Direct the remote controller at the remote control signal sensor of the PRIMARY monitor.
OSD appears on the monitor having the ID number you selected.
NOTE:
When the ID selection OSD is being displayed on the PRIMARY monitor, press the DISPLAY button on the remote controller again to
cancel the ID selection OSD and then control the monitor you selected.
If you set the remote control mode wrongly and remote control operation becomes unavailable, press any button on the control
panel of the monitor to display the OSD screen and change the remote control mode using ADVANCED OPTION. By pressing and
holding down the DISPLAY button on the remote control for 5 seconds or longer, the remote control mode is initialized to NORMAL.
You can perform the same control using CAT5.
English-53
English
Remote control numbering function
Troubleshooting
No picture
• The signal cable should be securely connected to the display card/computer.
• The display card should be securely seated in its slot.
• The Main Power Switch and the computer power switch should be in the ON position.
• Make sure that the correct mode has been selected on the display card or system being used.
(Please consult the display card or system manual to change the graphics mode.)
• Check the monitor and your display card with respect to the compatibility and recommended settings.
• Check the signal cable connectors for bent or pushed-in pins.
Power button does not respond
• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.
Image persistence
• Please be aware that LCD Technology may experience a phenomenon known as “image persistence.” Image persistence occurs
when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image
persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate
image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
NOTE:
As with all display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at
regular intervals whenever the screen is idle or turning off the monitor when not in use.
Image is unstable, unfocused or swimming is apparent
• Signal cable should be securely attached to the computer.
• Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing the fine adjustment.
When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.
• Check the monitor and your display card with respect to the compatibility and recommended signal timings.
• If the displayed text is garbled, change the video mode to the non-interlace mode and use 60 Hz refresh rate.
Image of component signal is greenish
• Check to see if the DVD/HD input connector is selected.
LED on the monitor is not lit (No green or red color can be seen)
• Power Switch should be in the ON position and power cord should be connected.
• Make certain the computer is not in the power-saving mode (touch the keyboard or mouse).
RED LED on the monitor is blinking
• A certain failure may have occurred. Please contact your nearest authorized MITSUBISHI ELECTRIC service facility.
Displayed image is not sized properly
• Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.
• Make sure that the correct mode has been selected on the display card or system being used.
(Please consult the display card or system manual to change the graphics mode.)
Selected resolution is not displayed properly
• Use OSD Display Mode to enter Information menu and check that the appropriate resolution has been selected. If not, select
corresponding option.
No sound
• Check to see if the speaker cable is properly connected.
• Check to see if the mute is activated.
• Check to see if the volume is set to the minimum level.
Wireless remote control is not available
• Check the wireless remote control’s batteries status.
• Check if the batteries are inserted correctly.
• Check if the wireless remote control is pointing at the monitor’s remote sensor.
“SCHEDULE”/“OFF TIMER” function is not working properly
• The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.
• If the “OFF TIMER” function is enabled and the power to the LCD monitor is turned off if the power supply is interrupted
unexpectedly, then the “OFF TIMER” will be reset.
Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or
degradation.
English-54
Specifications
Orientation
Landscape / Portrait
31.2
31.2
1436
811
873
Dimension (Unit: mm)
LCD Module
Screen size (diagonal)
Panel Type
Panel Pitch
Resolution
Color
Brightness (typ.)
Contrast ratio
Viewing Angle (CR>=10)
Response time
65” (1639mm)
VA
0.744 mm
1920 x 1080 pixels (Full HD)
Approximately 1.06 Billion
700 cd/m2
2500 : 1
Up/Down 178° , Left/Right 178°
8 ms (Gray to Gray)
1428.5 mm x 803.5 mm ( 56.2” x 31.6”)
VESA DPM
VESA DDC2B, DDC/CI
Contrast, Position, Phase, Clock
Brightness, Contrast, Black level, PIP, Screen saver, Side border color,
Gamma selection, Black level expansion, Heat status, Power on delay,
Schedule, Tiling, CAT5 control, Auto Brightness, Closed Caption, etc.
Viewing Area
Power Management
Plug and Play
Auto Adjustment
OSD user functions
Input Connector
PC Input / Output
(Analog)
(Digital)
Output Connector
Horizontal Frequency
Vertical Frequency
Video Signal
Sync Signal
Supported Resolution
Input / Output
Signal
Input Connector
AV Input / Output
(Analog)
(Digital)
Output Connector
Supported Resolution
Audio Input / Output
Input Connector
Output Connector
External Speaker Output
Control Input /
Output
Input Connector
Output Connector
Input Voltage / Current
Power Supply
Power Consumption
Power Consumption at Power Saving
Temperature
Operation
Environment
Humidity
Temperature
Storage
Environment
Humidity
Net (without stand)
Dimension
(W x H x D)
Gross
Net (without stand)
Weight
Gross
Wall mounting interface
Regulation/Guideline compliance
(Analog)
(Digital)
MINI D-SUB 15-pin, BNC (R, G, B, H, V) (PC/AV Common), Modular 8-pin(CAT5)
HDMI (PC/AV Common), DVI-D (HDCP supported, PC/AV Common),DisplayPort
MINI D-SUB 15-pin (PC/AV Common) Modular 8-pin(CAT5)
15.625/15.734, 31.5 kHz - 91.1 kHz
50.0/58.0 Hz - 85.0 Hz
Analog: Analog RGB, Digital: TMDS (with HDCP)
Analog: Separate (TTL), Sync on Green, Digital: TMDS
640 x 480, 800 x 600, 1024 x 768, 1280 x 768, 1360 x 768, 1280 x 1024,
1600 x 1200, 1920 x 1080, 1920 x 1200
(1600 x 1200, 1920 x 1200 Simplified Compression)
Composite <BNC>, Separate (Y/C) <S-TERMINAL>,
Component (Y/Pb/Pr) <BNC> (PC/AV Common)
HDMI (PC/AV Common), DVI-D (HDCP supported, PC/AV Common)
Analog: Composite <BNC>, MINI D-SUB 15-pin (PC/AV Common)
Composite/Separate: NTSC, PAL, SECAM, 4.43 NTSC, PAL60
Component/Digital: 480i, 480p, 576i, 576p, 1080i, 720p, 1080p
RCA pin-jack L/R x 2, Stereo mini jack
HDMI (digital audio)
RCA pin-jack
Speaker Jack(L/R), 7W + 7W (8 ohm)
RS-232C <D-SUB 9-pin>, CAT5 <Modular 8-pin> (PC/Control Common),
LAN <Modular 8-pin>
RS-232C <D-SUB 9-pin>, CAT5 <Modular 8-pin> (PC/Control Common)
4.9 A - 2.0 A @AC100 - 240 V, 50/60 Hz
487 W (467W without speaker)
Less than 2 W, Mechanical Power SW off: 0 W
5 - 40°C / 41 - 104°F (Landscape Mode), 5 - 35°C / 41 - 95°F (Portrait Mode)
20 - 80% (without condensation)
-20 - 60°C / -4 - 140°F
10 - 90% (Without condensation) / 90%-3.5% x (Temp-40 °C) regarding over 40 °C
1498 x 873 x 139mm (59.0 x 34.4 x 5.5”)
1774 x 1200 x 375mm (69.8 x 47.2) x 14.8”)
Approximately 47.7 kg (104.9 lbs)
Approximately 54.4 kg (121.9 lbs)
8-M8 Screws holes (200mm (7.9”) pitches) for Monitor mount
UL60950-1 / C-UL / EN60950-1 / CE / BSMI / GOST-R / FCC-B / DOC-B /
EN55022-A / EN55024 / EN61000-3-2 / EN61000-3-3 / C-Tick / RoHS / US Mercury
NOTE: Technical specifications are subject to change without notice.
English-55
English
139
76
60
1498
Pin Assignment
1) Analog RGB input (Mini D-SUB 15-pin): RGB3
Pin No
Name
Pin No
Name
1
Video Signal Red
9
+5V (DDC)
2
Video Signal Green
10
SYNC-GND
3
Video Signal Blue
11
GND
4
GND
12
DDC-SDA
5
DDC-GND
13
H-SYNC
6
Red-GND
14
V-SYNC
7
Green-GND
15
DDC-SCL
8
Blue-GND
Mini D-SUB 15-pin
1
5
6
10
11
15
2) Analog RGB input (CAT5): RGB5
Pin# at RJ45
Signal
Pair
CAT5
#1
Red Video+
#2
Red Video-
#3
Green Video+
#4
Blue Video+
#5
Blue Video-
#6
Green Video-
#7
RS-485+
#8
RS-485-
1234 5678
3) Digital RGB input (HDMI): RGB1
Pin - Assignment of HDMI connector:
1
TMDS Data2+
8
TMDS Data0 Shield
15 SCL
2
TMDS Data2 Shield
9
TMDS Data0-
16 SDA
3
TMDS Data2-
10 TMDS Clock+
17 DDC/CEC Ground
4
TMDS Data1+
11 TMDS Clock Shield
18 +5V Power
5
TMDS Data1 Shield
12 TMDS Clock-
19 Hot Plug Detect
6
TMDS Data1-
13 CEC
7
TMDS Data0+
14
Reserved (N.C. on
device)
HDMI
19
1
2
18
4) Digital RGB input (DVI-D): RGB2
Pin - Assignment of DVI-D connector:
1
TMDS Data2-
9
TMDS Data1-
17 TMDS Data0-
2
TMDS Data2+
10 TMDS Data1+
18 TMDS Data0+
3
TMDS Data2 Shield
11 TMDS Data1 Shield
19 TMDS Data0 Shield
4
NC
12 NC
20 NC
5
NC
13 NC
21 NC
6
DDC Clock
14 +5V Power
22 TMDS Clock Shield
7
DDC Data
15
8
Analog Vertical Sync
16 Hot Plug Detect
Ground (return for +5V,
23 TMDS Clock+
H-SYNC and V-SYNC)
24 TMDS Clock-
English-56
DVI-D
1
8
9
17
16
24
Pin Assignment (continued)
5) Digital RGB input (DISPLAY PORT): RGB6
Name
Pin No
Name
1
ML_Lane 3 (n)
11
GND Top
2
GND
12
ML_Lane 0 (p)
3
ML_Lane 3 (p)
13
CONFIG1
4
ML_Lane 2 (n)
14
CONFIG2
5
GND
15
AUX CH (p)
6
ML_Lane 2 (p)
16
GND
7
ML_Lane 1 (n)
17
AUX CH (n)
8
GND
18
Hot Plug Detect
9
ML_Lane 1 (p)
19
Return
10
ML_Lane 0 (n)
20
DP_PWR
DISPLAY PORT
Pin No
20
GND
2
GND
3
Y (Luminance)
4
C (Chroma)
2
MINI DIN 4-pin
Name
1
1
19
6) S-VIDEO input (MINI DIN 4-pin): VIDEO<S>
English
Pin No
4
3
2
1
7) RS-232C input/output
Pin No
Name
1
NC
2
RXD
3
TXD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
D-SUB 9-pin
1
5
6
9
8) LAN (Modular 8-pin)
Pin# at RJ45
Signal
#1
Orange/White stripe
#2
Orange
#3
Green/White stripe
#4
Blue
#5
Blue/White stripe
#6
Green
#7
Brown/White stripe
#8
Brown
Pair
Modular 8-pin
1234 5678
English-57
Download PDF