Dometic | 8600Series | Specifications | Dometic 8600Series Specifications

EN
Macerator Toilet
Operation manual
DE
Mazerier-WC
Bedienungsanleitung . . . . . . . . . . . . . 13
FR
WC dilacérateur
Mode d’emploi . . . . . . . . . . . . . . . . . 22
ES
Inodoro triturador
Manual de instrucciones . . . . . . . . . . 32
NL
Toilet met versnijdingspomp
Instructihandleiding . . . . . . . . . . . . . . 42
IT
WC di macerazione
Manuale di istruzioni . . . . . . . . . . . . . 51
FI
Silppuripumppu-wc
Ohjekirja . . . . . . . . . . . . . . . . . . . . . . 60
SV
Macerator-toalett
Bruksanvisning . . . . . . . . . . . . . . . . . 69
DA
Findelingstoilet
Instruktionsvejledning . . . . . . . . . . . . 78
NO
Macerator-toalett
Brukerhåndbok . . . . . . . . . . . . . . . . . 87
8900 series
8600 series
8900 and 8600
Series
MasterFlush™
Toilets
1
SeaLand MasterFlush Toilet
1
B
E
A
D
C
F
G
K
I
H
J
2
B
C
F
A
D
E
Table of contents
1
2
3
4
5
6
7
8
9
10
2
EN
Notes on using the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Maintenance and winterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 12
Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SeaLand MasterFlush Toilet
1
Notes on using the manual
Notes on using the manual
Caution!
Safety Instruction: Failure to observe this instruction can cause material damage and
impair the function of the device.
Note
Supplementary information for operating the device.
fig. 1 A, page 2 : This refers to an element in an illustration. In this example, item A in
figure 1 on page 2.
2
General safety instructions
The manufacturer will not be held liable for claims for damage resulting from the following:
• Faulty assembly or connection
• Damage to the unit from mechanical influences, misuse or abuse
• Alterations to the unit without express written permission from the manufacturer
• Use for purposes other than those described in the operating manual
2.1
Warnings – marine applications
The following statements must be read and understood before installing, servicing and/or
operating this product on a boat. Modification of this product may result in property damage.
Dometic recommends that a qualified marine technician or electrician install or service this product.
Equipment damage, injury to personnel or death could result from improper installation. DOMETIC
ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR DAMAGE TO EQUIPMENT, OR INJURY OR DEATH
TO PERSONNEL THAT MAY RESULT FROM IMPROPER INSTALLATION, SERVICE OR OPERATION
OF THIS PRODUCT.
Caution! Hazard of Flooding
If toilet is connected to ANY through-the-hull fittings, ALWAYS close seacocks when
toilet is not in use (even if boat is unattended for a brief period). All passengers MUST be
instructed on how to close valves when the toilet is not in use. Failure to do so can result in
flooding which can cause loss of property and life.
Caution! Hazard of Flooding
If the toilet uses fresh water for flushing and is connected directly or indirectly to a shoreside municipal water system at ANY time, shoreside water connections MUST be disconnected if the boat is unattended (even if boat is unattended for a brief period). Failure to do
so can result in flooding which can cause loss of property and life.
Caution! Hazard of Flooding
Before beginning any work on this product, be sure that all electrical power to the unit has
been turned off and that seacocks are in the CLOSED or OFF position. Failure to do so can
result in flooding which can cause loss of property and life.
3
General safety instructions
SeaLand MasterFlush Toilet
Caution!
Overfilling the holding tank can create serious damage to the sanitation system, such as
rupturing the holding tank and releasing tank contents into the bilge. To prevent this possibility, Dometic recommends using the “full” tank shut-down relay in the toilet’s electronic
control module. The “full” signal from the holding tank can be generated by an optional
Dometic DTM01C tank monitor or DTM04 four-level tank monitor system.
3
Intended use
The SeaLand MasterFlush toilet provides an electric-flush toilet that macerates waste and pumps
it to a holding tank or other effluent storage/disposal system. Operated by a wall-mounted flush
switch, the toilet allows the user to add water to the bowl (before using or flushing) and to flush the
toilet by pushing a button. The Dometic flush switch panel includes lights to indicate when electric
power to the toilet is activated, and when the holding tank (if applicable) is full.
3.1
Benefits
Convenient electronic flush. Add water or flush with the touch of a button.
Choice of two water consumption settings. “Normal” flush uses 0.85 gal. (3.2 liters) per flush and adds
water to bowl after flush; “Dry Bowl” setting uses only 0.45 gal. (1.7 liters) per flush and does not add
water to the bowl.
Versatile installation. Powerful macerator pump allows toilet to be located up to 98 ft. (30 m) away and
9.8 ft. (3 m) below holding tank or other discharge line destination.
“Power on” and “full tank” indicator lights. Dometic or other flush switch panel indicates when
electrical power to toilet is activated, and when holding tank is full (when connected to holding tank level
indication system).
Automatic “full tank” shut-down. When connected to a holding tank level indication system, the
MasterFlush toilet control module will shut off electrical power to the toilet when the holding tank is full.
This safety features prevents overfilling the holding tank, which may cause damage to the boat.
4
Components
(fig. 1 , page 2)
Ref.
4
Description
Ref.
Description
A
Macerator toilet
G
Incoming electrical power wires
B
Dometic flush switch/status panel
H
Power wires to raw water pump (opt.)
C
Control module
I
Wire from “full tank” signal
D
4-wire cable to toilet
J
Floor mounting hardware kit
E
Cable from Dometic flush switch
K
Floor mounting template
F
6-wire cable to Vimar/Gewiss
flush switch/status panel (optional)
Refer to complete parts list (packed separately)
for additional information.
SeaLand MasterFlush Toilet
5
Specifications
5.1
Materials
Intended use
Toilet: vitreous ceramic
Dometic switch panel frame: ABS
Macerator pump body: glass-filled polypropylene
Dometic switch panel: polycarbonate resin
Control module housing: ABS
5.2
Minimum System Requirements
Electrical
Circuit breaker
20 amps/12 V DC; 15 amps/24 V DC
Wiring
12 ga. (up to 20 ft./6.1 m from breaker)
Fitting
0.5 in. NPT
Water
Supply
Flow rate
2.0 gpm/7.6 lpm minimum
Discharge
Inside diameter
1.5 in./38 mm or 1 in./25 mm
Specifications are subject to change without notice.
5.3
Dimensions (fig. 2 , page 2)
Toilet models 8970, 8979, 8980, 8989
(standard height)
Ref.
Dimension
Toilet models 8930, 8939, 8940, 8949
(low-profile height)
Ref.
Dimension
A
18.125 in. / 460 mm
A
14.75 in. / 375 mm
B
14.75 in. / 375 mm
B
14.75 in. / 375 mm
C
18.625 in. / 473 mm
C
18.25 in. / 464 mm
D
17 in. / 432 mm - seat height
D
13.625 in. / 346 mm - seat height
E
15.75 in. / 400 mm
E
14.875 in. / 378 mm
F
33.5 in. / 851 mm - seat lid up
F
30.25 in. / 768 mm - seat lid up
Models 8670, 8679, 8680, 8689
(standard height)
Ref.
Dimension
Models 8630, 8639, 8640, 8649
(low-profile height)
Ref.
Dimension
A
18 in. / 457 mm
A
15 in. / 381 mm
B
14.75 in. / 375 mm
B
14.75 in. / 375 mm
C
19.75 in. / 502 mm
C
19.75 in. / 502 mm
D
17 in. / 432 mm - seat height
D
14 in. / 356 mm - seat height
E
16 in. / 406 mm
E
15.375 in. / 391 mm
F
33.5 in. / 851 mm - seat lid up
F
30.5 in. / 775 mm - seat lid up
5
Specifications
6
Operation
6.1
Toilet system start-up
SeaLand MasterFlush Toilet
1. Turn on water supply to toilet.
2. Press “Flush” switch (fig. 3 2) once. After nine seconds of water flow, macerator pump will start
and run for about six seconds to clear bowl. It will take about five seconds to refill bowl.
3. Toss several sheets of toilet paper into bowl and repeat
cycle. The bowl should completely clear.
6.2
3
1
Normal toilet operation
ADDING WATER TO TOILET BOWL
Press “Add Water” switch (fig. 3 1) until desired water level
is achieved. (Water flow will shut off automatically if switch
is pressed too long to avoid overflow.) More water is usually
added only when flushing solids.
2
3
4
Dometic flush switch/status panel
FLUSHING TOILET
Press “Flush” switch (fig. 3 2) down, then release it. This activates a powerful macerator pump that
siphons water and waste from the bowl, macerates, and propels the effluent through the discharge
line to the holding tank.
Note
If toilet system is equipped with Vimar or Gewiss
flush switches and indicator lights supplied by
Dometic, flush control and indicator light graphics
are the same as those on the Dometic flush panel.
1
3
2
4
Vimar or Gewiss flush switch/
status panel (optional)
Caution – Do Not Flush Foreign Objects!
Flush only water, bodily wastes and rapid-dissolving toilet
tissue. Do not flush wet wipes, sanitary napkins, condoms,
diapers, paper cups, cotton swabs, food, hair or liquids
such as oils or solvents as clogging or damage to the toilet
or toilet system may occur.
Note
Make sure all guests understand toilet operation before use.
6
SeaLand MasterFlush Toilet
6.3
Operation
Changing flush modes
MasterFlush toilets offer two flush settings to help manage water consumption:
Normal flush – Uses 0.85 gal. (3.2 liters) per flush. Adds water to bowl after every flush.
Dry Bowl flush – Uses 0.45 gal. (1.7 liters) per flush. Does not add water to bowl after flush.
To change from Normal to Dry Bowl flush setting, press “Flush” switch for about five seconds. When
“Power On” light (fig. 3 3, p. 6) begins flashing, release “Flush” switch. Flush mode has been
changed to Dry Bowl setting. Change mode to Normal flush by following the same procedure.
6.4
Indicator lights
“POWER ON” INDICATOR
On the Dometic flush switch panel, a steady green “Power On” light (fig. 3 3, p. 6) indicates when
electrical power to the toilet is activated. A momentary flashing green light indicates when flush
mode is changing.
“FULL TANK” INDICATOR
The Dometic flush switch panel includes a red “Full Tank” light (fig. 3 4, p. 6) to indicate when the
holding tank is full and should be pumped out. When the red light is illuminated, electrical power to the
toilet automatically shuts off to prevent possible overfilling of the holding tank.
6.5
Bidet operation
(toilet models with
integrated bidet only)
4
5
1. Turn on bidet faucet by
turning handle away from
toilet (fig. 4 ).
2. Adjust water temperature by
turning handle up for warm
water and down for cool
water (fig. 5 ).
3. Use electronic “Flush” switch
to clear toilet bowl during
and after bidet use.
Caution! Hazard of Flooding
Be sure to shut bidet faucet off completely after use.
7
Maintenance, winterizing
7
Maintenance and winterizing
7.1
Cleaning the toilet
SeaLand MasterFlush Toilet
To maintain the toilet’s original, lustrous appearance, use SeaLand® Toilet Bowl Cleaner or other nonabrasive bathroom and toilet bowl cleaners. Please follow label directions.
Caution
To avoid damaging internal seals, do not clean toilet with abrasive cleaners, caustic
chemicals, or lubricants and cleaners that contain alcohols or petroleum distillates.
7.2
Routine maintenance
MONTHLY
1. Inspect toilet, plumbing, and plumbing connections, wires, and wire connections.
2. Open and close all plumbing valves, including seacocks (for boat applications).
3. Check in-line water filters and vented loops for blockage.
YEARLY
Check water valve filter. Also check water valve filter if water flow into toilet becomes insufficient.
7.3
During extended periods of non-use
The macerator toilet and sanitation hoses should be protected if toilet will not be needed for an
extended period of time (more than two weeks, especially in hot weather).
1. Flush toilet in “Normal” mode and add 4 oz. (118 ml) of liquid biodegradable laundry detergent
(should NOT contain bleach or environmentally harmful substances). Note: If using sea water for
flushing, shut off power to sea water pump and add fresh water by pouring directly into the bowl
during the flush cycle.
2. Flush toilet with water at least five times.
3. Turn off water supply to toilet.
4. Flush the toilet without water. Repeat three times. (This procedure will minimize any remaining
water in the macerator pump.)
5. Turn off power to the toilet.
If system will be subjected to freezing temperatures, please follow above procedure, and then
winterize system as described in next section.
8
SeaLand MasterFlush Toilet
7.4
Maintenance, winterizing
Winterizing
At the end of each season, the SeaLand MasterFlush macerator toilet should be winterized for
storage by using potable water-safe antifreeze (if boat or vehicle will be exposed to freezing
temperatures).
Note
Use nontoxic antifreeze (propylene glycol) designated for potable water systems. (See boat
or vehicle owner’s manual.)
Caution
Never use automotive-type antifreeze (ethylene glycol) in freshwater systems.
PRESSURIZED FRESH WATER SYSTEM
1. Drain potable water tank and empty holding tank.
2. Add freshwater antifreeze to potable water tank.
3. Flush potable water antifreeze and water mixture through toilet(s) and into entire system,
including the waste holding tank, diverter valve connections, discharge pumps, etc. Turn off
power to toilet.
Each installation is different, so amounts may vary. User discretion is required to assure
adequate protection.
RAW WATER SYSTEM
Parts required:
• 1.5 in. (38 mm) ID hose, about 3 ft. (1 m) long
• 0.625 in. (16 mm) ID hose, about 3 ft. (1 m) long
• two containers
1. Close intake and discharge seacocks. See Hazard of Flooding risks in this manual.
2. Turn off power to toilet.
3. Disconnect and drain intake hose, discharge hose, and in-line filters.
4. Connect 0.625 in. (16 mm) ID hose to raw water pump intake and 1.5 in. (38 mm) ID hose to toilet
discharge.
5. Place one container under hose connected to toilet’s discharge.
6. Place hose connected to intake pump into bucket with antifreeze and pour antifreeze in other
container.
7. Turn on power to toilet and flush until antifreeze is removed from toilet.
8. Disconnect power to toilet and reconnect all intake and drain hoses.
9
Troubleshooting
8
SeaLand MasterFlush Toilet
Troubleshooting
Problem
1. Flush cycle operates correctly
but water in the bowl empties
slowly or not at all.
Possible Cause
Service Instruction
a.Discharge piping is pinched or
kinked.
b.Discharge piping is too high.
(Remember, all upward vertical
loops and should not exceed a
total of 9.8 feet (3 m) in height.)
c.The macerator pump or
discharge piping is blocked.
a.Check discharge piping.
2. Macerator pump makes
unusually loud noise or
continually trips breaker.
a.Foreign material in pump
chamber.
a.Close seacocks and clear foreign
material.
3. Flush cycle is not activated after
pushing on flush switch.
a.Holding tank is full and signal
from tank has shut down
electrical power to toilet.
b.Electrical power to toilet is shut
off or disrupted.
c.Flush switch is malfunctioning.
d.Circuit board in control module is
malfunctioning.
a.Empty holding tank.
a.Water supply line is pinched or
kinked.
b.Screen in water valve is blocked.
a.Check water supply line.
c.Intake water filters are blocked
(in raw water system).
d.Water valve is malfunctioning.
c.Clear water filters.
a.Clogged inlet screen at hot or
cold connection at toilet/bidet
mixer valve.
b.Clogged aerator in bidet nozzle
inside toilet bowl.
c.Toilet/bidet mixer valve assembly
is not functioning properly.
a.Disconnect water lines from
mixer valve and clean screens.
4. Insufficient or no water enters
the bowl.
5. Insufficient water flow during
bidet operation.
10
b.Reroute discharge piping.
c.Close seacocks and clear
blockage.
b.Check wiring and circuit
breakers (or fuses).
c.Replace flush switch.
d.Replace control module.
b.Clear blockage at water valve.
d.Replace water valve.
b.Unthread aerator nozzle and
clean.
c.Replace mixer valve assembly.
SeaLand MasterFlush Toilet
9
Warranty
Warranty and product liability
North America and Rest of the World:
Manufacturer’s One-Year and Five-Year Limited Warranty
Dometic Corporation, Sanitation Division warrants to the original purchaser only that this product (certain
Dometic products, listed below, have a longer warranty period), if used for personal, family or household
purposes, is free from defects in material and workmanship for a period of one year from the date of
purchase.
Dometic Corporation, Sanitation Division also warrants to the original purchaser only that the following products will not leak liquid sewage or malodorous gases for a period of five (5) years if used for
personal, family or household purposes:
• OdorSafe branded sanitation hose
• Thermoplastic pump bellows installed in the Dometic T series discharge pump
• Dometic DHT-L series holding tanks
If this Dometic product is placed in commercial or business use, it will be warranted to the original
purchaser only to be free of defects in material and workmanship for a period of ninety (90) days
from the date of purchase.
Dometic reserves the right to replace or repair any part of this product that proves, upon inspection
by Dometic, to be defective in material or workmanship. All labor and transportation costs or charges
incidental to warranty service are to be borne by the purchaser-user.
EXCLUSIONS
IN NO EVENT SHALL DOMETIC BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES,
FOR DAMAGES RESULTING FROM IMPROPER INSTALLATION, OR FOR DAMAGES CAUSED BY
NEGLECT, ABUSE, ALTERATION OR USE OF UNAUTHORIZED COMPONENTS. ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, ARE LIMITED TO A PERIOD OF ONE YEAR FROM DATE OF PURCHASE.
IMPLIED WARRANTIES
No person is authorized to change, add to, or create any warranty or obligation other than that set forth
herein. Implied warranties, including those of merchantability and fitness for a particular purpose, are
limited to one (1) year from the date of purchase for products used for personal, family or household
purposes, and ninety (90) days from the date of purchase for products placed in commercial or business
use.
OTHER RIGHTS
Some states do not allow limitations on the duration of an implied warranty and some states do not
allow exclusions or limitations regarding incidental or consequential damages; so, the above limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights
which vary from state to state.
To obtain warranty service, first contact your local dealer from whom you purchased this product or go
to http://www.dometic.com/enus/Americas/USA/Customer-Support/ for a dealer near you.
11
Warranty
SeaLand MasterFlush Toilet
Europe:
Warranty and Customer Service
Warranty arrangements are in accordance with EC Directive 44/1999/CE and the normal conditions
applicable for the country concerned. For warranty or other service, please contact the Dometic
Customer Service department nearest you. Any damage due to improper use is not covered by the
warranty.
The warranty does not cover any modifications to the product or the use of non-original Dometic parts;
the warranty does not apply if the installation and operating instructions are not adhered to and no
liability shall be entertained.
Dometic also warrants to the original purchaser only that the following products will not leak liquid
sewage or malodorous gases for a period of five (5) years if used for personal, family or household
purposes:
• OdorSafe branded sanitation hose
• Thermoplastic pump bellows installed in the Dometic T series discharge pump
• Dometic DHT-L series holding tanks
Product Liability
Product liability of Dometic Group and its subsidiary companies does not include damages which
may arise from: faulty operation; improper alterations or intervention in the equipment; adverse
effects from the environment which may impact the equipment itself or the direct vicinity of the
equipment or persons in the area.
To obtain warranty service, first contact your local dealer from whom you purchased this product or go
to http://www.dometic.com to locate a dealer near you.
10
Customer service
There is a strong, worldwide network to assist
in servicing and maintaining your sanitation
system. For the Authorized Service Center near
you, please call from 8:00 a.m. to 5:00 p.m. (ET)
Monday through Friday.
Telephone:
1 800-321-9886 330-496-3211 U.S.A. and Canada
International
Fax:
330-496-3097 330-496-3220 U.S.A. and Canada
International
Web site:
http://www.Dometic.com
® Registered; ™ Trademark of Dometic Corporation
© Dometic Corporation
600345991 6/10
12
You may also contact or have your local
dealer contact the Parts Distributor nearest
you for quick response to your replacement
parts needs. They carry a complete inventory
for the SeaLand product line.
DOMETIC CORPORATION
SANITATION DIVISION
13128 SR 226 | PO BOX 38
BIG PRAIRIE, OHIO 44611 USA
www.dometic.com
Download PDF