Multimedia Standard | QR-130 | User manual | Multimedia Standard QR-130 User manual

The Movie what you really wanted to watch
The Music which is your favorite
The Photos which has your happy memories
TV Drama which you would never miss
Relax yourself wherever and whenever so far
Ultimate Digital Multimedia Player “Movie Clip”
User Manual Guide
Model QR-130
User Manual Guide
Model: QR-130
CONTENTS
1. Introduction.............................................................................................................................. 4
2. Product Specification ............................................................................................................. 5
3. Descriptions & Product Contents.......................................................................................... 7
3-1 Description ......................................................................................................................... 7
3-2 Product Contents............................................................................................................... 8
4. Remote Controller ................................................................................................................... 9
5. SATA HDD Installation ......................................................................................................... 12
6. Partitioning and Formatting Hard Disk ............................................................................... 14
6-1 Setting and Formatting on Windows 98/ME.................................................................. 14
6-2 Setting and Formatting on Windows 2000 / XP ............................................................ 18
6-3 Hard disk formatting and partition under Windows VISTA.......................................... 22
6-4 Use on Linux (Available on Linux 2.4 or later).............................................................. 24
6-5 Use on Macintosh ............................................................................................................ 25
7. Connecting QR-130 ............................................................................................................... 26
7-1 TV Connection – A/V IN ................................................................................................... 26
7-2 TV Connection – A/V OUT ............................................................................................... 26
7-3 Connection with Y/Pb/Pr Component OUT ................................................................... 27
7-4 Connection with HDMI OUT ............................................................................................ 27
7-5 Power Connection ........................................................................................................... 28
7-6 Ethernet Connection........................................................................................................ 28
7-7 WLAN Connection (by option)........................................................................................ 29
7-8 Connection with 2Ch of Normal Audio .......................................................................... 29
7-9 Connection with Optical output ..................................................................................... 30
7-10 First Time Usage ............................................................................................................ 30
8. Getting Started....................................................................................................................... 31
8-1 Selecting Video In-Live TV, Recording and Time Shift................................................. 31
8-2 Selecting file copy function ............................................................................................ 31
8-3 Selecting browser function............................................................................................. 31
8-4 Selecting Setup ................................................................................................................ 32
8-5 Timer Rec.......................................................................................................................... 32
9. Setup Menu ............................................................................................................................ 33
9-1 Changing System Settings ............................................................................................. 33
9-2 Changing Audio Settings ................................................................................................ 35
9-3 Changing Video Settings ................................................................................................ 36
9-4 Changing Record Settings.............................................................................................. 38
9-5 Changing Network Settings............................................................................................ 39
10. Browser Menu...................................................................................................................... 45
10-1 Browsing All ................................................................................................................... 45
10-2 Browsing Music ............................................................................................................. 46
10-3 Browsing Photo ............................................................................................................. 46
10-4 Browsing Movie ............................................................................................................. 47
10-5 Browsing via Network ................................................................................................... 47
10-6 File Management............................................................................................................ 49
2
User Manual Guide
Model: QR-130
10-6 Playlist ............................................................................................................................ 51
11. Media Recording................................................................................................................. 53
11-1 Recording from Video-In Mode .................................................................................. 53
11-2 Time Record Menu ....................................................................................................... 53
12. File Copy Menu .................................................................................................................... 56
13. Firmware Upgrade............................................................................................................... 58
13-1 System information ....................................................................................................... 58
13-2 Firmware Upgrade ......................................................................................................... 58
17. Frequently Asked Questions.............................................................................................. 60
18. Caution ................................................................................................................................. 64
3
User Manual Guide
Model: QR-130
1. Introduction
Thank you very much for purchasing this brand-new Multimedia Player QR130 with stronger function
support. In the digital era, this product is quite suitable to be a home entertainment partner. With her
outstanding designed features, you can enjoy movies and music, view photos of precious moments, and
record your favorite TV or movie programs to make up for your regret of not being able to enjoy them in
time. The editing function provides you with an easy way to save the essential part. It's also a good choice
to use this product as a portable storage device for its built-in HDD and high-speed USB 2.0.
This player has the following functionality:
Video Recording
-
-
supports one button recording and schedule recording in MPG
format, can easily record programs from TV, DVD player and DV,
and save as MPEG-2 (.mpg) format; also can edit the recorded
titles;
Time shifting function;
-
supports VOB (DVD), IFO (DVD), MPG (MPEG-2/1), AVI (MPEG-4
ASP: XviD), DAT (VCD), and MPEG-2 TS files; resolution up to
1080i;
supports MP3, OGG, and WMA* files;
-
supports one button playlist music playback;
Photo Playback
-
supports digital camera JPEG, and BMP files;
Data Storage
-
works as a portable hard disk using USB 2.0 port;
Network Function
-
HDMI
-
Movie Playback
Music Playback
Video Recording
-
-
-
Ethernet & WLAN streaming playback (Wireless function supported
by the optional Wireless LAN USB Adapter);
High-Definition Multimedia Interface transmits the highest quality
digital video and audio via a single cable, simplifies cabling and
provides high quality home theater experience.
supports one button recording and schedule recording in MPG
format, can easily record programs from TV, DVD player and DV,
and save as MPEG-2 (.mpg) format; also can edit the recorded
titles;
Time shifting function;
We hope that this product will bring you a lot of enjoyment. We are committed to apply multimedia
technology to work, entertainment, family, daily life, car and everywhere in the world. Welcome to be with
us. Thank you again for choosing our Home Multimedia Center.
NOTE
WMA Pro & Advanced Profile and WMA with DRM are not supported.
4
User Manual Guide
Model: QR-130
2. Product Specification
GENERAL
Dimensions
190.5(W) x 54(H) x 183.2(L)mm
Power Supply
AC 100~240V
Power Consumption
Approx. 35 W
Operating Temperature
+5°C to +35°C (+36°F to +95°F)
Operating Humidity
5% to 80% RH
Hard Disk SATA HDD
SATA HDD
Net Weight
Approx 1.5 kg
50~60Hz
CONTENT FORMATS SUPPORTED
DAT/VOB/IFO/MPG/AVI/MPEG-2 TS
Formats
MP3/OGG/WMA
Compression rate: between 32 kbps and 320 kbps
JPEG/BMP
RECORDING FORMAT
Video
HQ / SP / LP / EP / SLP mode :
MPEG-2 MP@ML
Audio
HQ / SP / LP / EP / SLP mode : MP2 2-channel
CODECS SURPORTED
Video
Audio
MPEG-1 / MPEG-2 / MPEG-4 ASP: XviD
MP2/MP3 /OGG Vorbis/WMA Standard
(DRM, Pro & Advanced Profile not supported) / PCM
VIDEO RECORDING MODE
Mode
80 GB HDD
120 GB HDD
160 GB HDD
HP
16hrs
24 hrs
33 hrs
SP
32 hrs
48 hrs
66 hrs
LP
48 hrs
72 hrs
99 hrs
EP
64 hrs
96 hrs
132 hrs
SLP
96 hrs
144 hrs
198 hrs
5
User Manual Guide
Model: QR-130
VIDEO OUTPUT SPECIFICATION
1 Vpp 75 Ohm
Composite Output
Y:1 Vpp 75 Ohm
Components Output
Cb:0.7 Vpp 75 Ohm
Cr:0.7 Vpp 75 Ohm
HDMI (Version 1.1)
HDMI Output
AUDIO PERFORMANCE
DA Converter
24-bit / 192kHZ
AD Converter
24-bit / 96kHZ
Signal-Noise (1kHZ)
≥ 95dB
Dynamic Range (1kHZ)
≥90dB
Channel
≥95dB
Separation Total Harmonic Distortion (1kHZ)
≤-85dB
SUBTITLE FORMATS SURPORTED
SRT, SMI, SSA, IDX/SUB, SUB
Formats
RECORDABLE DEVICE SUPPORTED
Built in HDD /
Device
USB HDD
USB SUPPORTED
- USB HDD
USB
- Other USB Mass Storage Devices
- USB 2.0 Interface
NETWORK FEATURE
Ethernet
WLAN
NOTE
10/100Mbps Auto-Negotiation
IEEE 802.11b/g, up to 54Mbps (supported by the optional WLAN USB Adapter)
The specifications and design of this product are subject to change without notice.
6
User Manual Guide
Model: QR-130
3. Descriptions & Product Contents
3-1 Description
Front Panel
1 POWER
Indicator (red) turns on when the system turns on.
2 REC indicator
When Recording starts, this LED would shining in Blue.
3 HDMI
When HDMI interface was working, the HDMI Led would be shining in Blue
4 IR: Infrared receiver window
Receiving IR signals from the remote control.
5 HDD
When reading HDD files from HDD, the HDD LED would be shinning.
7
User Manual Guide
Model: QR-130
Rear Panel
1. Air Flow
8. USB SLAVE port (MINI USB)
2. Audio OUT jack (Left Channel)
9. Y/Pb/Pr OUT jack (Components Video)
3. AUDIO OUT jack (Right Channel)
10. S/PDIF Optical jack
4. VIDEO OUT jack
11. HDMI jack
5. AUDIO IN jack (Right and Left Channel)
12. USB HOST port x 1
6. VIDEO IN jack
13. DC IN jack
7. RJ45 LAN port
3-2 Product Contents
QR130
Power Adapter
Remote Controller
Power Cable
Battery
A/V Cable
Install CD
User Guide
SCART
Adapter
The actual contents in the package might be different from the packing list in this manual
USB Cable
NOTE
8
User Manual Guide
Model: QR-130
4. Remote Controller
9
User Manual Guide
Model: QR-130
1
Power
2
Numeric botton
Press to enter standby mode or wake up
Press to enter channel numbers or numeric input when
changing settings.
3
Press to jump to a specific point on a title. Specify the point
GOTO
using Title, Chapter and Time.
Change player video output mode according to the following
4
TV OUT
order (NTSC Composite -> NTSC Component -> NTSC
HDMI -> PAL Composite -> PAL Component ->PAL HDMI)
5
AUDIO
Press to select an audio track
6
VOLUME +
volume up
7
SKIP BACKWARD
fast reverse during video play /10 second rewind during mp3
play.
8
VOLUME
9
PAUSE
-
volume down
Stop play.
Press to begin recording or to resume when recording has
10
RECORD button
been paused. Press repeatedly to set one touch recording
(OTR) length (30 MIN. / 60 MIN. / 90 MIN. / 120 MIN. / 180
MIN. / 240 MIN. / Off).
11
OK
12
BROWSER
Press to select options in menus.
Press to browse music, photo, and movie files on HDD, USB,
and NET
13
REPEAT ALL
repeat all items when play video,mp3,ect.
14
REPEAT ONE
repeat one item when play video,mp3,ect.
15
TIMER
Press to enter the Timer Menu directly to add, edit and delete
recording schedules. See 5.1 Creating a New Schedule for
more details.
While in Video In mode, press to activate the time shift
function, which allows you to pause live TV and resume the
program from the point you left it. While paused, the program
16
TIME SHIFT
is recorded to the HDD or USB device, as long as space is
available. Press to activate TIME SHIFT function and wait for
the PLAY arrow to appear on the screen. Press and the
program will be paused. Press to resume viewing the
program. Time shift mode remains active until you press.
10
User Manual Guide
Model: QR-130
17
SETUP
Press to access the Setup Menu directly.
18
MUTE
Press to mute audio output, and press again to resume
19
GUIDE
Press to view the Guide menu, it is the player’s home page.
20
INFO
Popup video information during Video Play.
21
SEARCH
Popup random access OSD during Video Play
22
SKIP FORWARD
Press to fast forward the current playback. Press repeatedly
to select speeds.
23
SEARCH
Popup random access OSD during Video Play.
24
PLAY
Press to begin playback of a media file or title
25
STOP
Press to stop playback
NAVIGATION
26
BOTTON
27
RETURN
Press the arrow buttons to select menu options.
Press to return to the previous screen when navigating
menus
28
SUBTITLE
Press to set subtitle option
29
DELETE
Press to delete what you want to delete
30
CONFIRM
Press to add the selected file to playlist
31
SELECT
Press to select the file to be added to playlist
32
ZOOM
Press to zoom in/out the image (photo or video)
33
COPY
Press to enter the file copy menu
34
CM SKIP
Press to forward 30 seconds when in playback or record
model
35
REPLAY
Press to backward 10 seconds of current playback
11
User Manual Guide
Model: QR-130
5. SATA HDD Installation
Please install the player according to the following instructions.
SATA HDD Installation
1、press the bottom cover.
bracket.
4、put hard disk in.
screws well .
2、open the bottom cover.
5、screw hard disk tightly
7、Insert the bracket with HDD. 8、Connect SATA or IDE cable
10、Insert bottom cover and close it. 11、Ok.
12
3、pull away hard disk
6、make sure all 6pcs
9、Connect power cable
User Manual Guide
Model: QR-130
13
User Manual Guide
Model: QR-130
6. Partitioning and Formatting Hard Disk
Non-formatted hard disks are not detected by PC. If the hard disk is not formatted, please take the
following steps to format it. Newly purchased hard disks are not normally formatted
6-1 Setting and Formatting on Windows 98/ME
In Windows 98SE, install and exclusive driver before proceeding to partition and
Caution
1.
formatting. In windows ME/2000/XP, there is no need to install exclusive driver
Install exclusive driver and then connect
QR130 to PC using USB cable
2.
Select Window [Start>Program>MS-DOS]
to open and MS-DOS window.
3.
Type fdisk command in MS-Dos window
and press the [Enter] key.
4.
Say yes to enable large disk capacity by
typing “Y” and then press the [Enter] key.
14
User Manual Guide
5.
Model: QR-130
Among fdisk options, select options
5[change current fixed disk drive].
6.
Type the hard disk number fro partitioning in
[Enter Fixed Disk Number] and press the
[Enter] key
7.
Select [1.creat DOS partition or Logical DOS
Drive] in fdisk options by typing “1” and then
press the enter key
8.
Select [1.Creat Primary DOS Partition] in
‘Create DOS Partition or Logical DOS Drive’
by typing “1” and then press the enter key.
15
User Manual Guide
9.
Model: QR-130
Wait for integrity check to be complete
as below
10. After integrity check, say yes to the message
‘Do you wish to use the maximum available
Size for a primary DOS partition and make the
Partition active( Y/N)?
By typing “Y” and press the enter key
11. Type in [capacity or % you want] and press the
enter key. If you want to use one disk
without partitioning. Type 100%.
12. Integrity check is started again.
After it is
completed, A message saying Primary Dos
Partition was created, drive letter was modified
or added is displayed.
Then, press [ESC] to return to fdisk options
13.
In fdisk option screen, press [ESC].
Then a message is displayed, saying that
your must restart your system.
Press [ESC] again.
16
User Manual Guide
Model: QR-130
14. At hen C:\WINDOWS> prompt, type exit
and then press[ENER] to return to window
screen.
15. Disconnect QR130 from PC and then connect
it again to PC.
16. Drive letter s created in [My Computer] of
Windows Explorer.
Right-click the created drive letter and select
[Format].
17. When formatting is completed , you can use
QR130 as an external hard disk drive by connecting
it to Computer.(I change it based on my comprehension)
For some hard disks, power supply from USB port is not enough for operation, in this
case, connect a separate power supply using the adapter supplied in the package. Then,
no problem will be experienced in operating the device connected to a PC.
Caution
For recently released PCs, there is a USB port installed on the front side of the PC for
users’ convenience. However, this expanded USB port sometimes fail to recognize
devices sending and receiving data in high speed such as external hard disk. In this case,
use the USB port in the rear side of the PC
17
User Manual Guide
Model: QR-130
6-2 Setting and Formatting on Windows 2000 / XP
Non-formatted hard disks are not detected by PC. If the hard disk is not formatted, please take the
following steps to format it. Newly purchased hard disks are not normally formatted
1.
Connect QR130 to a PC using a USB cable
2.
Select [Start> Control Panel>management
Tool>Computer Management] and then
[Disk Management] under Computer Management
menu.
3.
Click [Next] to continue when write Signature
and Disk Upgrade Wizard appears
4.
Select the disks you want to write a disk signature to
and Click [Next] to continue
5.
When Write Signature and Disk Upgrade Wizard
is completed, Click [Finish]
6.
Right-click an [Unallocated] drive in Drive Management
and select [New Partition] from the menu that appears.
7.
When the New partition Wizard is shown,
Click [Next] to continue
18
User Manual Guide
8.
Model: QR-130
Select [Primary Partition(P)] and Click [Next]
to continue
9.
Enter the desired partition size in [Partition size in MB]
and Click [Next] to continue.
10. When the [driver letter] is assigned, Click [Next]
11. In the format partition windows, select
[format this partition with the following settings] and
FAT32, and then check [Perform a quick format] box.
Click [Next] to continue.
12. When [Completing the New Partition Wizard]
appears, Click [Finish]
19
User Manual Guide
Model: QR-130
13. A new NTFS partition was created.
14. Right-click an [Unallocated] drive in Drive
Management and select [New Partition] from
the menu that appears.
15. When the New partition wizard is shown
Click [Next] to continue.
16. Select [Primary Partition(p) and Click [Next]
to continue.
17. Leave the value for [Partition size in MB]
as if appears and Click [Next] to continue.
(The partition size shown is the remaining
hard disk size unallocated.)
18. When the [drive letter] is assigned,
Click [Next]
20
User Manual Guide
Model: QR-130
19. In the format partition windows select
[Format this partition with the following settings]
and NTFS, and then check [Perform a quick format]
box, Click [Next] to continue.
20. When [Completing the New Partition Wizard]
appears, Click [Finish].
Drives formatted with NTFS file system are detected on windows 2000/XP,
but not detected on Windows 98/ME.
Do not select to use [Compressing Files and Folder] option.
Caution
If the specification file system is FAT32 on windows 2000/XP, it is not possible
to have one drive letter on large hard disk over 32GB. In order to have one partition,
please perform partitioning and formatting on windows 98/ME.
Also, select [Primary Partition] to have multiple partitions on large hard disk over 40GB.
If [Extended Partition] is selected, drives may not be detected.
21
User Manual Guide
Model: QR-130
6-3 Hard disk formatting and partition under Windows VISTA
Under VISTA, you can create a partition and format the hard disk using the disk manager.
1. Right click the Window icon
located
on the right hand side of the task bar.
Please do me a fav our to insert the icon,
thank you.
The following menu will be displayed.
Right click on “computer” then select “Manage”
2. You access the “Computer Management”
software. Select “Service and Application”
in the left column.
The following window will be displayed.
3. The QR130 hard disk can be viewed on the
right
hand side window.
If the indication is not given. this means that
the disk has not been formatted.
4. Right click the hard disk bar and select
“New Simple Volume” (See the left figure)
22
User Manual Guide
Model: QR-130
5. The wizard-“Welcome to the New Simple
Volume Wizard” will be displayed (Partition),
Click on “Next”
6. Specify here the maximum size of the desired
partition
7. In this window, tick the box “Assign the following
drive letter” and let window name the letter,
here it is D then click on “Next” .
8. In this window, leave all the default parameters
but select “Format this volume with the following
settings” then Click on “Next”
23
User Manual Guide
Model: QR-130
9. In the right hand side window Click on
“Finish” to close the window then start to
format your hard disk.
10. “Healthy (Primary Partition)” will be displayed.
When “Healthy (Primary Partition)” is displayed,
this means that your QR130 hard disk is formatted
and ready for use.
You can now close the disk management window.
6-4 Use on Linux (Available on Linux 2.4 or later)
[Auto Mount]
After booting , log in as a root user. Connect this product and turn the power on .Confirm whether this
product's partition is detected using the partition tool, fdisk.
Make a mount pointer, for example, QR130, in folder mount ( / mnt)and edit / etc / fstab /
to add the following:
/ dev / sda1 / mnt / QR130 vfat nosuto, user 0 0 -> for HDD formatted with
FAT32
/ dev / sda1 / mnt / QR130 ntfs nosuto, user 0 0 -> for HDD formatted with
NTFS
You can use after log in again.
[Manual Mount]
Create mount pointer in the same way as above and then mount this product by typing as follows:
Mount -t vfat / dev / sda / mnt / QR130 -> for HDD formatted with FAT32
Mount -t ntfs / dev / sda / mnt / QR130 -> for HDD formatted with NTFS
24
User Manual Guide
Model: QR-130
it is assumed that QR-130 is detected as sda in the example above .Drive name
Note
may subject to change depending on user environment .Please type the name of
drive detected by USB Mass Storage.
[How to Stop Using QR-130]
You can unmount QR-130 in Device Manager.
6-5 Use on Macintosh
As this product is automatically detected on Macintosh O/S 9.X or later, there is no need extra drivers.
When stop using this product on Macintosh, discard the corresponding Desktop icon into Trash Bin and
disconnected this product from USB port..
25
User Manual Guide
Model: QR-130
7. Connecting QR-130
7-1 TV Connection – A/V IN
(1) Follow the picture and plug in the 3 color connector to the player's A/V IN jack;
(2) Follow the picture and plug in the 3 color connector to the A/V OUT jack of the TV/IP TV
Set-Top Box (STB). In this way, you can record TV programs from the TV/IPTV Set-Top Box.
7-2 TV Connection – A/V OUT
(1) Follow the picture and plug in the 3 color connector to the player's A/V OUT jack;
(2) Follow the picture and plug in the 3 color connector to the TV's A/V IN jack. In this way, you
can enjoy the content in the player on TV or other display devices.
26
User Manual Guide
Model: QR-130
7-3 Connection with Y/Pb/Pr Component OUT
(1) Follow the picture and plug in the 3 color connector to the player's Y/Pb/Pr jack;
(2) Follow the picture and plug in the 3 color connector to the TV's Y/Pb/Pr jack.
Audio Connection while using Y/Pb/Pr Video out:
First method: use the audio output from the A/V OUT jack;
Second method: use the audio output from the S/PDIF Coaxial or Optical jack.
(3) In this way, you can also enjoy videos, music, and photos in the player on TV.
7-4 Connection with HDMI OUT
(1) Follow the picture and plug one connector on your HDMI cable to the player's HDMI jack;
(2) Follow the picture and plug the other connector on your HDMI cable to the TV's HDMI
jack. (not supplied)
(3) In this way, you can have the highest quality video and audio via a single cable.
27
User Manual Guide
Model: QR-130
7-5 Power Connection
(1) Follow the picture and connect the AC adaptor to the player's DC IN jack;
(2) Follow the picture and plug in the AC adaptor to the power outlet.
7-6 Ethernet Connection
To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network cable
(not supplied).
(1) Connect one of the crystal plugs on the cable to the player's RJ45 LAN socket;
(2) Connect the other crystal plug on the cable to a RJ45 LAN port on your router,
28
User Manual Guide
Model: QR-130
7-7 WLAN Connection (by option)
(1) Make sure the player is powered on;
(2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of
the player.(Please use the Wi-Fi Dongle we provided)
7-8 Connection with 2Ch of Normal Audio
Connect red and white audio cables from QR-130 to same colored input jack of TV or audio
device
29
User Manual Guide
Model: QR-130
7-9 Connection with Optical output
"When you have a multi channel Decoder /amplifier with optical input, you can enjoy 5.1CH
high quality sound through optical cable.
The illustration on the top shows how to connect with optical cable"
7-10 First Time Usage
HDD Installation
For users who bought the player without a HDD inside, and want to install a SATA HDD, please see 5 HDD
Installation for details.
Remote Control
First time usage of Remote control Install the batteries before using the remote control, slide the battery
cover off remote control back, put batteries in, and slide the cover on.
Power on/off, language control
1. Power on
After connecting the power supply cord, press the power button on the player or remote control to wake up
the system, the blue Power indicator on the front panel will turn on, wait for a couple of seconds to enter
the system .
2. Power off
When the system is running, press the Power button on the player or remote control, the player will turn
off.
30
User Manual Guide
Model: QR-130
8. Getting Started
Power on the system, and after a few seconds, the system will enter a guide menu.
8-1 Selecting Video In-Live TV, Recording and Time Shift
Choose this option, you can pre-view the video to be recorded, or have time shift function (See TIME
SHIFT button in Remote Control for more details). To select an input source, select Video In button on the
guide menu page.
8-2 Selecting file copy function
Choose this option, You can go on for file copy function, among Local network, hard disk drive and
external storages
8-3 Selecting browser function
Playback Multimedia Files, You can browse all the multimedia (Videos/Music/Photos) files on the internal
31
User Manual Guide
Model: QR-130
HDD/USB or Network, and playback them on TV. Press
on the remote control or select Browser button
on the guide menu page to browse movie, photo, and music files stored either on a HDD, USB device, or
Network.
8-4 Selecting Setup
To enter the setup menu, press
on the remote control or select setup option on the guide menu page.
8-5 Timer Rec
To enter the Timer Rec, select Timer Rec option on the guide menu page, you can make detail record
setting in this function.
32
User Manual Guide
Model: QR-130
9. Setup Menu
The Setup Menu allows you to configure language, audio, video, record, network and system settings. To
enter the menu, select Setup from the Guide menu or press
button on the remote control.
9-1 Changing System Settings
Press
and
on the remote control to select the System tab from the menu.
Menu Language
Press
on “Menu Language”, use
you want and
Press
,
and
to confirm.
Text Encoding
Select to set text encoding. Press and to select from Unicode.
Press
to confirm.
33
to choose the right Language
User Manual Guide
Model: QR-130
Time
Select to set the system time.
Press
Enter the system menu and press
to adjust each setting. Press
and enter Manual setup.
and
to select each field and the up and down navigation arrows
to confirm.
Restore Default
Select to restore factory defaults.
A confirmation message appears. Select
and press Enter to restore all settings to defaults.
34
User Manual Guide
Model: QR-130
9-2 Changing Audio Settings
Press
and
on the remote control to select the Audio tab from the menu bar.
Night Mode
Select to set night mode. Press
and
to select from Off, On, and Comfort. Press
confirm.
Digital Output
Select to set Digital Output mode.
Press
and
to select from Raw, and LPCM. Press
35
to confirm.
to
User Manual Guide
Model: QR-130
9-3 Changing Video Settings
Press
and
on the remote control to select the Video tab from the menu bar.
Aspect Ratio
Press
and
to select from Pan Scan 4:3, Letter Box 4:3, or 16:9. Press
to confirm.
Pan Scan 4:3: Display a wide picture on the entire screen and cut off the redundant portions. Select when a
standard 4:3 TV is connected.
Letter Box 4:3: Display a wide picture with two black borders on the top and bottom of 4:3 screen. Select
when a standard 4:3 TV is connected.
16:9 : Compress the image to convert the whole image. Select when a 16:9 TV is connected.
36
User Manual Guide
Model: QR-130
Brightness
Select to set brightness levels. Press
previewed onscreen. Press
and
to adjust brightness. The new setting is
to confirm.
Contrast
Press
and
to adjust contrast.
The new setting is previewed onscreen. Press
to
confirm.
Video System
Press
and
to set the TV system, depending on your viewing preferences. Press
confirm.
37
to
User Manual Guide
Model: QR-130
9-4 Changing Record Settings
Press
and
on the remote control to select the Record tab from the menu bar.
Quality
Press
and
to select the quality setting you require. The highest quality setting is HQ which
requires the most storage space. The other settings reduce recording quality sequentially but also require
to confirm。
less storage space. Press
Permanent Timeshift
Press
and
to select from On and Off. Press
will be activate permanently.
38
to confirm. If On, the Time Shift function
User Manual Guide
Model: QR-130
Record Device
Select to set device to restore the recorded files.
and
Press
to select from HDD and USB. Press
to confirm.
9-5 Changing Network Settings
Press
and
on the remote control to select the Network tab from the menu bar.
Before using the Network functions, please check the following items:
1) Connect the player to a LAN or WLAN first;
2) Please enable NetBIOS of TCP/IP on computer;
3) Please turn off your PC’s firewall;
4) Please enable your PC’s ‘Guest’ account;
5) Please share the folders which you wish to browse on your PC, and make sure that
‘Everyone’ or ’Guest’ has the right to access.
39
User Manual Guide
Model: QR-130
Wired LAN Setup
Press
and
to select DHCP IP (AUTO) or FIX IP (MANUAL). Press
DHCP IP (AUTO): Set the IP address by auto. Press
to confirm.
to confirm.
FIX IP (MANUAL): Using Fixed IP, it is required to enter the followings: IP address, Subnet Mask, and
Default Gateway. For further assistance to the above settings, please contact the network administrator.
Use Navigational and Numeric buttons to enter IP address. Press
to confirm.
Wireless Setup
Before configuring the WLAN settings, please check the following:
1) Make sure the WLAN USB Adapter is connected to the USB HOST port;
2) Make sure there is a wireless router or an AP (Access Point) on the network, or your PC is
equipped with a wireless network adapter/card;
3) Make sure your player is in the effective range of the WLAN. Select Modify if it is your first time to
connect to a wireless network.
40
User Manual Guide
Model: QR-130
There appear two connection modes:
Infrastructure (AP) mode and Peer to Peer (Ad Hoc) mode. If you
Want to chang the setting, choose the Modify, if not , just Connect.
Press
Press
to last step , and
and
for next step.
to select items, and ok to confirm.
Infrastructure (AP)
Infrastructure mode is used to connect computers with wireless network adapters, also known as
wireless clients, to an existing wired network with the help from wireless router or access point.
1) Get SSID Name
Select Auto to search for an existing SSID
(Service Set Identifier).
41
User Manual Guide
Model: QR-130
Select the access point you wish to access from the SSID list.
In the Security list, WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access)
note
means the network is encrypted, i.e. an encryption key is needed to access the network.
NONE means it is an open system network.
2) Confirm SSID Name
3) WLAN Security Setting
Select Open System if the network is not encrypted. Otherwise,
select Shared Key (WEP) or WPA Key to enter the encryption key
4) Wireless Address Setup
Select DHCP IP (AUTO) to set the IP address automatically. Or
select FIX IP (MANUAL) to set the IP address manually.
42
User Manual Guide
Model: QR-130
5) Setting List
The Setting List displays the network settings just now you
configured.
6) Test Connection
The test will take for a while, please be patient to wait.
If the test is ok, the network information will be displayed.
Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is used to connect
wireless clients directly together, without the need for a wireless router or access point.
1) Ad Hoc Setup
Select Manual if you wish to change the default settings.
Then set the Wireless SSID, Wireless Security, and Host IP for the Ad Hoc connection.
43
User Manual Guide
note
Model: QR-130
Both the player and your PC need to use the Ad Hoc mode, share a common SSID, and
be put into the same IP range.
2) Save and Startup
Select OK to confirm the above settings.
If the test is ok, the network information will be displayed.
44
User Manual Guide
Model: QR-130
10. Browser Menu
The Browser menu allows you to browse and play music, photo and movie files stored on a HDD, an
external USB device, and Network. To enter the menu, select Browser from the Guide menu.
Press
and
to select the device on which the media is stored. Choose from HDD, USB, NET,
and press
When data on HDD, USB device is connected or connect the system to Network, you can also browse
photos, listen to music, and watch movies.
You also can add your favorite movie from USB,HDD,NET to the playlist, and more easy to enjoy it next
time.
10-1 Browsing All
Use
and
on the remote control to select the All tab.
45
User Manual Guide
Model: QR-130
All directories and supported contents will be displayed.
and
to select the directory or file you
wish to browse, and press to confirm.
10-2 Browsing Music
Use
and
on the remote control to select the Music tab.
All directories and supported audio files in current directory will be displayed. Press
and
to select the file you want to play.
Press select and confirm button which enables you to add the current music to the playlists.
10-3 Browsing Photo
Use
and
on the remote control to select the Photos tab.
All directories and supported image files in current directory will be displayed. Press
to select the photo you want to view and press
and
. The photo will be displayed full screen.
1. When the photo is displayed in full screen mode, the slide show starts automatically.
NOTE
2. While listening to music files, you can browse the photos at the same time.
46
User Manual Guide
Model: QR-130
While browsing a photo, you can press
photo, you can press
or
to rotate a photo in any angle. Besides rotating a
to zoom in/out that photo.Five zoom levels are available.
10-4 Browsing Movie
Use and
on the remote control to select the Movies tab.
All directories and supported video files in current directory will be displayed. Press
to select the movie you want to view and press
and
. The movie will be played in full screen mode. This
browsing movies function supports DAT, VOB, IFO, MPG, AVI, and TS file formats. While browsing a
movie in full screen mode, you can press
to zoom in/out the image. Eight zoom levels are available.
10-5 Browsing via Network
You can streaming playback the multimedia files shared on the local area network (Ethernet or WLAN).
Before viewing the following, please make sure that you have read 9.5 Changing Network Settings and
made the right settings. When selecting NET in the Browser menu, there are two ways to locate the
multimedia files shared on your local network. One way is to browse through workgroup; the other way is
to browse through "My Shortcuts"
47
User Manual Guide
Model: QR-130
[1] Browsing through Workgroup
ou can choose the workgroup which your PC belongs to from the workgroup list, find your PC name, and
press
to confirm. Then select the shared multimedia file that you want to browse.
1. While browsing high definition video files (resolution up to 720p / 1080i) via Ethernet or
WLAN, the video might be buffering. It is normal due to the limit of network speed or
NOTE
signal strength.
2. Due to different network conditions, sometimes the workgroup might not be accessed
or shown in the list. And then you need to use My Shortcuts to browse shared files.
[2] Browsing through My Shortcuts
You can also set Specific File Server IP and access it from My Short in the menu.
Network Browser
Select to set Net User ID, Net Password, and Specific File Server IP, Network Browser which enables to
My Shortcuts.
-Select Net User ID and the entry screen will appear.
-Use the navigation arrows to select letters and numbers.
-Select CAPS to toggle between uppercase and lowercase letters.
-Press to delete a letter.
-Press
to insert a space.
-Press to input each letter or number.
-Select Net Password and the entry screen will appear.
48
User Manual Guide
Model: QR-130
-See above.
- Select Specific File Server IP, and use Navigational and Numeric buttons to enter IP address.
- You can also select Detail to set the Label, Domain, and
Host Name of the shortcut. Then select OK to
confirm.
Select the shortcut you added and press ok to confirm。
Then select the shared multimedia file that you want to browse.
10-6 File Management
In this File management chapter, there would be some introduction for file management.
Playing Back Titles
To play a recorded title, do the following:
1. Press
and
on the remote control to select
1
the Play tab from the menu bar.
3
2. Press
and
on the remote control
to select the title you wish to play.
49
2
User Manual Guide
3. Press
Model: QR-130
on the remote control or the ENTER
(Play)button on the front panel to play the file.
4. Press
on the remote control stop playback and
return to the Title List menu screen
Deleting Titles
To delete a title, do the following:
1. Press
and
on the remote control
to select the title you wish to delete,
press ‘delete’ button.
2. When confirmation message appears.
Press
3. Press
or
and select Delete.
to delete the selected file.
To cancel delete, select Return.
Renaming Titles
To rename a title, do the following:
1. Press
and
on the remote
control to select the file you wish to rename.
2. Press “Rename” on the remote control.
The name entry screen appears.
3. Choose Rename, and press ‘ok’ to confirm.
4. Use the navigation arrows to select letters and
numbers. Select CAPS to toggle between uppercase
50
User Manual Guide
Model: QR-130
and lowercase letters.
Press <- to delete a letter. Press -> to insert a space.
Press
to input each letter or number.
5. Once you have entered the new name, select OK
and press
to confirm all change, If you want to cancel
the naming during the process, choose return.
10-6 Playlist
Add your favorite movie from USB,HDD,NET to the playlist, and more easy to enjoy it next time.
1)
Get in to USB, HDD,NET in Browse. And use
and
2) Press the SELECT bottom on the remote control .
51
to choose the file you want to add.
User Manual Guide
2)
Model: QR-130
And then press CONFIRM bottom on the remote control
3) you can find the file which was added in playlist
52
User Manual Guide
Model: QR-130
11. Media Recording
11-1 Recording from Video-In Mode
Select Video-in option from the Guide List, enter into this Video-in mode, and press ‘REC’ button
to recording files.
11-2 Time Record Menu
The Timer Record menu allows you to create, edit and delete recording schedules and view all schedule st
on the remote control to enter the menu.
atus and history. Press
Create a New Schedule
Press
and
on the remote control to select the Edit tab from the menu bar. Select Add a New
Schedule and press
. The schedule setting screen appears.
Use and on the remote control to move between fields and Press
and
to adjust each
setting.
StartTime
Length
Enter the date and time of the recording.
Enter the length of the recording
Select how often you want the schedule to record. Choose from
Repeat
Once, Everyday, Mon-Fri, Mon-Sat or for an individual day of the
week.
Select the recording quality. Choose from HQ, SLP, EP, LP and SP.
Quality
The higher the quality, the more space required on the hard drive.
See HDD Free Space on the left of the screen for details of how
long you can record for using each setting.
Preview
This small preview window will show the current program of the
select channel.
53
User Manual Guide
Model: QR-130
Editing Schedule
Press
and
on the remote control to select the Edit tab from the menu bar.
Select the schedule you want to edit from the list and press
.
The schedule setting screen appears. Modify the schedule as described in 11-2 Creating a New Schedule.
Deleting Schedules
Press
and
on the remote control to select the Delete tab from the menu bar. Select the
schedule you want to delete and press
. A confirmation message appears.
Select CANCEL, Delete the selected schedule or Delete all schedules. Press
54
to confirm.
User Manual Guide
Model: QR-130
Viewing Schedule Status
Press
and
on the remote control to select the Status tab from the menu bar. The schedule list is
displayed. Select a schedule and press
.
Viewing Recording History
Press
and
on the remote control to select the History tab from the menu bar. Here you can view
a complete history of all recordings that were set.
NOTE
Recording function can only realize with Hard Disk file system: FAT32, NTFS cannot
support this function. For NTFS system format, it would shows ‘No space’
55
User Manual Guide
Model: QR-130
12. File Copy Menu
Press COPY bottom on the remote control to enter the File Copy menu, which allows you to copy files
between HDD, USB devices and Network.
Step 1: Select the source device and destination device.
Press
and
to select device. Press
to cancel, and
Step 2: Select the source files you want to copy.
Press play
button to select files,
to cancel,and
56
to next step.
for next step.
User Manual Guide
Model: QR-130
Step 3: Select the destination folder to store the above files.
Press
and
to select folder. Press
to cancel, and
for next step.
Step 4: Proceed to copy selected files.
Press
NOTE
and
to select OK, press
to confirm. And the copy will start.
File copy function can only realize with Hard Disk file system: FAT32, NTFS cannot
support this function.
57
User Manual Guide
Model: QR-130
13. Firmware Upgrade
13-1 System information
In video-in Mode, please press ‘stop’ first, and ‘ pause’ button later, the player system information would
appears as follows including firmware version no.
13-2 Firmware Upgrade
If it is the first time that you are installing a SATA HDD (no matter it is a new one or an old one into the
player, please make sure you have read the following steps in advance.
Step 1: Backup Data
Please backup the data in the HDD before installing it into the player.
The following steps will format the hard disc, which will erase all data currently stored on the hard disc.
Step 2: Install the HDD
Follow the HDD Installation Guide, and install the HDD into the player.
Step 3: Prepare the USB Pen Drive
You will need a USB Pen Drive for firmware installation. Copy the 1 files from the firmware folder to
the root directory of your USB Pen Drive.
Step 4: Connect the USB Pen Drive
Plug the USB Pen Drive into one of the USB HOST ports of the player.
Step 5: Connect the power cable and hold the power button
Plug the power cable into the DC IN jack, Press and hold the power button on the front panel, and do not
loosen. wait for about 5 seconds or more, and then loosen your finger on the power button; Firmware
58
User Manual Guide
Model: QR-130
upgrade will start in about 30 seconds. If it is connected to a TV set, a yellow install page will appear on the
TV screen.
Please wait for about 3 minutes, the installation will be completed and player will be restarted automatically.
Note:
If install error or white screen occurs, please unplug the power cable and try again;
Do not turn off the power during installation;
The USB Pen Drive is not allowed to be unplugged during installation.
Download the latest firmware from our official website.
If install error or white screen occurs, please unplug the power cable and try again;
NOTE
Do not turn off the power during installation;
The USB Pen Drive is not allowed to be unplugged during installation.
59
User Manual Guide
Model: QR-130
17. Frequently Asked Questions
Question1. My computer does not recognize my player.
1. Make sure the player is powered on. If it is off, the computer will not be able to find the player;
2. Make sure the player is connected to computer.
3. When using Windows 98SE, install the USB driver first. After installation, restart the computer. Then
reconnect the player to the computer.
4. If you installed the Windows 98SE driver over your Windows? XP, 2000, or ME edition, problems
might occur
5. It is not recommend using the USB ports in the front of your computer, try to use the USB ports in
the rear, because the USB ports in the front are often from non-powered hubs.
Question2. When I try to disconnect the USB device, I keep on getting
“The device ‘Generic volume’ cannot be stopped right now. Try stopping the device again later.”
message, what should I do?
Close any program that might be accessing data on the player, including Windows® Explorer. If it does
not work, close all programs and wait for another 20 seconds, then try the green arrow icon again. If it
still does not work, you should shut down the player and disconnect the USB cable.
Question 3. I find new file names and folder names that I never created before or
they have strange gibberish names.
player shutting down (due to low battery power) while reading or writing to your computer by the USB
connection. Windows and Macintosh often write extra files to the hard disk such as finder.def or
System volume info. These are normal and will not do any harm to the player.
Question 4. I used my player to transfer files back and forth between different
computers. Will defragmenting the player hard disk do any harm to it?
Defragmenting the player hard disk may be useful after having transferred many files to and from the
player. It is never harmful to use the defragment on the player. Make sure no other programs are
running while using the Windows? defragment utility. Make sure you have connected the player with
the external power adapter during this procedure.
60
User Manual Guide
Model: QR-130
Question 5. My files have disappeared from the player.
Make sure that you browse your files via the correct Browser mode which means correct filtered views
such as Photos, Music, or Movies.
Question 6. Why do some supported photo formats, cannot be shown in the photo function?
In the JPEG format there are different modes. The player doesn’t support all the modes.
So you have to change your photo format first as follow:
1. Use Photoshop to open the photo;
2. Choose ”File” then “save as” from the menu, as the picture on the left hand side shows, select the
picture format as JPEG, input the file name and click the “save” icon;
3. After click on the “save” icon, a new window will appear as the picture on the right hand side shows,
select “Baseline (standard)” or “Baseline optimized”;
4. Click OK icon.
Question 7: When the player is powered on, why will the TV have a short flashing, blue screen
or screensaver?
This is normal, when the system initializes, it will setup the corresponding parameters so it can output
the correct video signal to the TV, during the initializing time, the TV will receive incorrect signals or the
signals will not be stable and will cause the TV screen to flash, some TV this as no signal, and will
display a blue screen or screensaver.
61
User Manual Guide
Model: QR-130
Question 8: Why when I switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, does the TV screen
display an unwatchable picture?
Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if your TV does not support,
please use the A/V signal display instead, press the TV SYSYEM button on the remote control, NTSC
or PAL.
Question 9: Why is there no sound on movie or music playback when using Y/Pb/Pr
component output?
Y/Pb/Pr output is a video output only, and does not include sound signals, when using Y/Pb/Pr output,
please plug the A/V OUT or the S/PDIF jack to output sound.
Question10: Why couldn’t the player find the hard disc?
Make sure the firmware is installed correctly, and no system partitions on the HDD were deleted. If
hard disc failure occurs, please backup your data and reinstall the firmware using the firmware in the
Driver CD which is provided along with the player.
Question11: Some functions like recording, time shift etc. do not work. What should I do?
If you find some functions do not work properly on the player, please change system settings to the
default (Refer to 6.6 for changing system settings).
Question 12: I cannot get SSID name, the screen always displays: Cant get any SSID!!
When the WLAN USB Adapter is connected to the player, it needs some time to get initialized. Please
wait for about 1~2 minutes and try again. Then it will work properly.
62
User Manual Guide
Model: QR-130
Question 13: I configured everything correctly, but still cannot get the wireless network
connected.
Are you using a firewall such as Norton Internet Security, McAfee Personal Firewall, Zone Alarm, etc.
or even the built-hat Service Pack 2 for Windows XP automatically upgrades your firewall and turn it
on by default)
If you have a firewall, it may need to be configured or have exceptions created to
allow you to see and communicate with the player on the network. To test if your firewall is preventing
network communication (including PING and access shared folders), try disabling it to see if you can
connect. If you can connect with the firewall disabled, you may need to add the player e firewall for
local intranet access. Worst-case, disable your firewall long enough to use the player, then enable it
again when done
63
User Manual Guide
Model: QR-130
18. Caution
This player's design and manufacture has your safety in mind. In order to safely and effectively use this
player, please read the following before usage.
Usage cautions
User should not modify this player. If commercial hard disk is being used, the environmental temperature
should be within +5℃ ~ +35℃.
Power
The player's power voltage: DC 12V. When using this player, please connect the supplied AC adapter or
AC adapter cable to the player's power jack. When placing the adapter cable, make sure it can not get
damaged or be subject to pressure. To reduce the risk of electric shock, unplug the adapter first before
cleaning it. Never connect the adapter to the player in a humid or dusty area. Do not replace the adapter or
cable's wire or connector.
Radio interference/compatibility
If not properly shielded, almost all electronic devices will get radio interference. Under some conditions,
your player might get interference.
The design of this player has followed the CE standard, and has
followed the following rules:
(1) This player may not cause harmful interference;
(2) This player could accept some interference received including interference that may cause undesired
operation.
Repair
If the player has a problem, you should take it to an appointed repair center and let the specialists do the
repair, never repair the player yourself, you might damage the player or endanger yourself or your data.
Disposing of the player
When you dispose of the player, be sure to dispose it appropriately. Some countries may regulate disposal
of electrical device, please consult with your local authority.
64
User Manual Guide
Model: QR-130
Hard disk cautions
The player uses an internal hard disk for data storage, in normal case, format or repair is not required.
You should carefully read the < Frequently Asked Questions > chapter, and check our website for latest
information before formatting the hard disk.
- Physical impact may create bad sector in the hard disk, you can use CHKDSK to fix the problem.
- All data stored in the player may be lost due to physical impact, electrical shock, power lost, HDD format
etc. Please backup your data.
- It is suggested to do defragment after a long period of usage.
- Regularly backup the data in the hard disk so that it can be recovered in the event of data corruption or
loss. Our company takes no responsibility for loss of data stored on the hard disk.
Others
When using this player, please do not let the player come into contact with water or other liquid, if water is
accidentally spilled on the player, please use a dry cloth to absorb the spillage. Electronic products are
vulnerable, when using please avoid shaking or hitting the player, and do not press the buttons too hard.
- Do not let the player come into contact with water or other liquid.
- Do not disassemble the player, repair the player or change the design of the player, any damage done
will not be included in the repair policy.
- Do not press the buttons of the player too hard. Avoid hitting the player with hard object.
- avoid shaking the player, and stay away from magnetic fields.
- During electrostatic discharge and the strong electromagnetic field, the product will malfunction, then
unplug the power cable and the product will return to normal performance next time it is powered on.
65
User Manual Guide
Model: QR-130
Warranty
z Warranty Regulations
The ZIONCOM Technologies Co., Ltd. Provides the following limited warranty based on the
consumer protection policy.
Limited warranty period starts form the date of purchase. The purchase date must be stated
when the product is purchased. When the purchase date is not stated, the limited warranty
ends after one year and six months form the manufacturing date.
1.
Product Warranty Period
QR-130
Accessories
3 months:
1 year form the data of purchase
2 months :
Everything else for 3 months
2.
Warranty Contents
During the limited warranty period, the ZIONCOM Technologies Co., Ltd. or designated
A/S center will provide warranty service according to the customer protection policy if and
only if the product is used in proper condition.
Although the product is within warranty period, repair fees may be charged if the product is
Used in one or more of the following conditions.
- Damaged by accident, misuse, abuse, neglect and / or improper maintenance
- Damaged by any improper use of the product such as disassembly or modification
- Damaged by outside impact or shock
- Damaged by soaked in any liquid, or rusted by any foreign substances
- Damaged by using accessories or parts not supplied by the ZIONCOM Technologies.
- Damaged by any natural disaster such as fire, lightening ,flooding, etc
- Damaged by any other misuse of the product by the user
3.
Recording Items
Product name : QR-100
Date of Purchase:
Place of Purchase:
Serial Number:
(Printed barcode on the bottom of the product)
66
User Manual Guide
Model: QR-130
67
Download PDF