Primus | 7 | Primus/Primus Infinity ® Empowered & More

MT-4597-2007
MT-4735-2007
Primus/Primus Infinity ® Empowered & More
02 |
PRIMUS & MORE
This catalogue provides an overview of the main
device combinations and additions to Primus/Primus
Infinity® Empowered, the various options, accessories
and replacement parts.
The list of contents shows at a glance which topics
the catalogue covers in detail.
The information contained in this catalogue is
designed to help you order the products you need.
It enables you to put together a system combination
which meets your specific needs and makes optimal
use of the system’s performance and capabilities.
As in the past, you will also find the catalogue helpful
in identifying and ordering individual accessory
components.
Not all products are available worldwide.
PRIMUS & MORE
| 03
CONTENT
2. Accessories for the basic unit, breathing system
Kit for oxygen therapy
Semi open breathing system
06
06
08
3. Medical aspiration accessories
Endotracheal Suction System
Disposable suction accessories
09
09
10
4. Anesthetic gas scavenging system (AGSS)
AGSS
AGSS transfer hose
AGSS suction hose
Connectors
11
11
11
11
11
5. Vaporizers
12
6. Accessories for gas and flow measurement
Gas measurement
Flow measurement
Filtration
Soda lime
Clic absorber
13
13
14
14
14
15
7. Ventilation sets
Reusable ventilation sets
Disposable ventilation sets without RFID
Disposable ventilation sets with RFID
Y-pieces and connectors
16
16
16
19
21
8. Disposable filters and HMEs
22
9. Reuseable ventilation accessories
Anesthesia and ventilation masks
Foregger masks
Rendell-Baker masks
Silicone breathing bags
Latex breathing bags
Resuscitator
24
24
24
24
25
25
25
10. Disposable breathing masks
LiteStar® face mask
ComfortStar® anesthesia face mask
Additional mask accessories
O2 masks
26
26
27
29
29
11. Pulse oximetry sensors
30
12. Monitoring combinations
31
MT-4420-2007
04
05
MT-5217-2004
1. Options for Primus/Primus Infinity® Empowered
Halogen lamps
PRIMUS & MORE
PRIMUS
PRIMUS IE
04 |
OPTIONS FOR
PRIMUS/PRIMUS INFINITY ® EMPOWERED
Dräger offers a wide range
of Software and Hardware options
for the Primus and Primus Infinity ® Empowered.
A
Conversion Kit Software 4.0
Software Options
– Advanced Ventilation
– Advanced Monitoring
– Volume Autoflow
8607885
8605290
MT-92-2002
1. OPTIONS FOR PRIMUS/PRIMUS INFINITY ® EMPOWERED
B
A
Breathing Sound Emulator Module
This option transforms the measured inspiratory
and expiratory flow values into an acoustic tone
similar to a breathing sound.
8605733
External fresh-gas outlet (A-cone)
8603388
8607881
For the connection of a non-rebreathing system.
For connection of an external O2 therapy and/or
an endotrachial aspiration system there are
conversion kits available for an O2 outlet and
AIR outlet at the gas supply block of the Primus
and Primus Infinity ® Empowered.
There are also some accessories available that
can be attached to the side rails of the Primus
and Primus Infinity ® Empowered.
B
For example:
Circuit hook
Drawer cabinet
Rail extension
Infusion pole
Hinged arm for cable management
Hinged arm holder
8601714
8601997
8601977
8601863
M34080
8601400
MT-398-98
For more detailed information please contact your sales representative.
PRIMUS
PRIMUS IE
PRIMUS & MORE
OPTIONS FOR
PRIMUS/PRIMUS INFINITY ® EMPOWERED
A
Halogen lamp, Euro
8604119
Halogen lamp, British Standard
8604120
Halogen lamp, US Standard
8604122
Halogen lamp, 12 V
8605361
Holder for all lamps
Halogen lamp mount, complete.
8604126
MT-93-2002
A
HALOGEN LAMPS
| 05
PRIMUS & MORE
ACCESSORIES FOR THE BASIC UNIT, BREATHING SYSTEM
2. ACCESSORIES FOR THE BASIC UNIT,
BREATHING SYSTEM
Earthing cable, 80 cm
8301348
Earthing cable, 3.2 m
8301349
KIT FOR OXYGEN THERAPY
C
D
O2 Flowmeter 90° NIST
Flowmeter, 90° (right) for rail, especially
for anesthesia devices with NIST outlet.
2M86249
O2 Flowmeter 90° neutral
Flowmeter as external flowtube, especially for
anesthesia devices with NIST outlet. For rail
connection 90° angled with fixes circuit and
NIST screw.
MP01199
Rail with adapter for 90°/flowmeter
AF00348
O2 Flowmeter NIST
Flowmeter for rail, especially for anesthesia
devices with NIST outlet.
Gas connection: 1 m circuit
with NIST connection nut,
device connection: M 34 x 1.5,
Gas coulour coding: ISO colour Flowmeter.
2M86248
O2 Flowmeter neutral
Flowmeter as external flowtube. For rail connection
90° angled with fixes circuit and NIST screw.
MP01198
DigiFlow O2
Oxygen flowmeter with digital display of set flow.
For rail mounting with rotatable NIST gas inlet
for the attachmet of a gas supply circuit
with NIST union nut.
Adjustment from 0.3 to 3 l/min in 0.1 increments,
from 3 l/min in 0.5 increments. With M 34 x 1.5
port for reusable Dräger humidifier systems or nozzle.
DigiFlow has a very high level of accuracy and
the flow is easy to read.
MP01229
Mount for external O2 flowmeter
8604116
MT-300-2003
B
C
MT-297-2003
B
MT-2984-94
A
D
MT-0103-2005
A
PRIMUS
PRIMUS IE
06 |
A
B
O2 connection nozzle, Ø 6 mm
Between a 6 mm silicone hose and an O2 flowmeter.
For use in all applications where humidification is not
desired, e.g. during manual ventilation with an O2 reservoir.
M06258
Connection nozzle O2, 22 mm/15 mm
AF00434
Compact breathing system, for Primus*
8605365
A
MT-2585-95
ACCESSORIES FOR THE BASIC UNIT, BREATHING SYSTEM
PRIMUS
PRIMUS IE
PRIMUS & MORE
8602803
8607827
8602804
8603857
8603275
2600650
Absorber insert
M33720
Absorber container
M33719
C
Drägersorb® Clic adapter
To use the Drägersorb® CLIC disposable absorber.
MX00012
D
Hex screwdriver
1640623
Flexible Bag Arm
8606462
* Reusable Absorber insert + Absorber container or Dräger CLIC
adapter must be ordered separately.
C
MT-3308-2004
Consisting of:
Cover with APL valve, yellow
Cover with APL valve, grey
Breathing gas block
Valve plate
Angled connector
Ventilator diaphragm
D
MT-2985-94
8607697
MT-0114-2008
B
Compact breathing system
for Primus Infinity ® Empowered*
| 07
PRIMUS & MORE
ACCESSORIES FOR THE BASIC UNIT, BREATHING SYSTEM
Kuhn-type anesthetic system for adults
Semi open breathing system by Kuhn,
with 2.3 l breathing bag.
M34822
Connecting sleeve
M13506
Anesthetic gas scavenging system for Kuhn system
M25838
Medec Waters Set
Semi open breathing system with integrated
adjustable pressure valve and AGSS connection.
M36037
B
MT-0806-2008
C
M34823
C
MT-085-2003
B
Kuhn-type anesthetic system for children
Semi open breathing system by Kuhn,
with 0.5 l breathing bag.
MT-393-98
A
SEMI OPEN BREATHING SYSTEM
A
PRIMUS
PRIMUS IE
08 |
PRIMUS
PRIMUS IE
PRIMUS & MORE
MEDICAL ASPIRATION ACCESSORIES
3. MEDICAL ASPIRATION ACCESSORIES
A
Ejector suction NIST Air/O2,
for connection to central supply system
Ejector suction NIST Air,
for connection to central supply
or Air outlet of the device
Air ejector type aspiration NIST Endotrachal bronchal
aspirator is used to extract secretion from the airways in
particular in the case of patients who are ventilated.
Vacuum suction NIST,
for connection to central supply system
MK01418
B
MK01420
MK01422
MT-4617-2005
A
MT-553-2001
ENDOTRACHEAL SUCTION SYSTEM
B
Holder for flowmeter
8604116
Kit swivel arm for suction containers, Primus (F)
8603581
Kit swivel arm
Primus Infinity ® Empowered (F)
8607848
Secretion jar set with clamp (C, W)
(includes suction accessoires)
2M86036
Kit rail for container holder (C, W)
AF00348
Bacterial filter
MK00514
D
MT-21145-96
MK03320
MT-2565-95
C
Vacuum suction DISS,
for connection to central supply system
E
E
F
Consisting of:
Secretion jar, 0.7 l
Jar cap with safety valve
Secretion sight glas
Suction circuit, 1.5 m
Angled connector
Circuit, 5 x 2 silicone
2M85594
2M85011
M07582
M25780
2M19063
1203606
F
MT-2492-95
C
D
8601179
MT-2568-95
Suction accessories
Secretion view glass, aspiration circuit,
angled connector, cap with valve, circuit.
(F) = Floor/(W) = Wall/(C) = Ceiling
| 09
PRIMUS & MORE
PRIMUS
PRIMUS IE
MEDICAL ASPIRATION ACCESSORIES
DISPOSABLE SUCTION ACCESSORIES
MX23023
B
VacuSmart tube, 2 m, disposable
MX23026
C
Bacterial filter 767, set of 5 pcs.
This bacteria filter was developed and optimized
for use with Dräger standard ejectors. These
filters are suitable for bronchial and surgical
suction as well as continuous and thoracic drainage.
6723976
MT-171-2003
VacuSmart, 0.7 l, disposable
Dräger Medical bronchial aspirators using
700 ml secretion jars, no need to modify the
aspirator. It is adaptable within few seconds.
An overflow safeguard reliably protects the
aspirator and the environment against
contamination.
B
MT-4451-2007
A
A
C
MT-3005-2004
10 |
PRIMUS
PRIMUS IE
PRIMUS & MORE
ANESTHETIC GAS SCAVENGING SYSTEM (AGSS)
4. ANESTHETIC GAS SCAVENGING SYSTEM (AGSS)
A
A
Anesthetic gas scavenging system AGSS
For scavenging excess gas from anaesthetic
workstations. For reducing the anaesthetic
agent concentration in the vicinity of
anaesthetic workstations.
M33300
MT-0730-2008
AGSS
B
Transfer hose, 50 cm (F/C)
Needed between AGS and anesthesia machine.
M35016
Transfer hose, 75 cm (W/C)
M33955
Transfer hose, 1 m (W/C)
M33295
Transfer hose, 1.5 m (W/C)
M33296
C
MT-2749-95
B
MT-2744-95
AGSS TRANSFER HOSE
AGSS SUCTION HOSE
Suction hose, 50 cm (C)
Between anesthetic gas scavenging system (AGSS)
and central gas supply.
M35015
Suction hose, 1.5 m (W)
M33297
Suction hose, 3 m (F)
M33298
Suction hose, 5 m (F)
M33299
MT-394-98
D
C
E
D
Anesthetic gas scavenging connector 45°
G60440
E
Anesthetic gas scavenging connector 45°, DIN EN
G60495
F
Anesthetic gas scavenging connector, straight
G60580
MT-1137-2003
CONNECTORS
F
MT-1138-2003
(F) = Floor/(W) = Wall/(C) = Ceiling
| 11
PRIMUS & MORE
PRIMUS
PRIMUS IE
12 |
VAPORIZERS
Connecting systems for anesthetic agents
Dräger vaporizers with Dräger connection system
for the anesthetic agents halothane, enflurane,
isoflurane, sevoflurane and desflurane.
MT-2630-2004
A
5. VAPORIZERS
D-Vapor
M35500
Vapor 2000
Isoflurane
Sevoflurane
Enflurane
Halothane
M35054
'DRÄGER FILL' FILLING ADAPTERS
B
Filling adapter, (h) Halothane (red)
M36090
Filling adapter, (i) Isoflurane (violet)
M36110
Filling adapter, (s) Sevoflurane (yellow)
M36120
Drainage set Quik-Fil
M34206
Vapor standby holder
Parking adapter for one Vaporize on the side
of machine. Plate included.
M33370
Vapor standby holder (rail)
For fitting on the wall rail.
To hold 2 Vaporizers with plug in systems.
M26966
Rail, complete
AF00348
Vapor standby holder Selectatec
8605588
Selectatec adapter
M34333
(W) = Wall/(C) = Ceiling
B
MT-399-98
A
PRIMUS
PRIMUS IE
PRIMUS & MORE
ACCESSORIES FOR GAS AND FLOW MEASUREMENT
A
6. ACCESSORIES FOR GAS AND FLOW MEASUREMENT
A
Set of 10 sampling lines
8290286
B
WaterLock®, set of 12 pcs.
For water separation when sampling test gas.
6870567
MT-088-2003
GAS MEASUREMENT
B
Water trap WaterLock® 2, set of 12 pcs.
For water separation when sampling test gas.
For use with the Dräger water trap holder without
Luer Lock connection and with the Dräger water trap
holder with Luer Lock connection and adapter.
6872130
D
Water trap Infinity ID WaterLock® 2, set of 12 pcs.
The Infinity ID-water trap with integrated transponder.
For Dräger appliances with Infinity ID technology the
transponder enables identification of the water trap at
the appliance with Infinity ID.
6872020
WaterLock® 2 adapter, set of 6 pcs.
This set (adapter and mounting screw, right on the
picture) allows you to use the former water trap holder
on device (left on the picture) with the new water
trap WaterLock 2 (6872130) and the Infinity ID
WaterLock 2 (6872020).
6872128
Fast oxygen sensor
Dräger O2 sensors are electromedical systems
intended for the measurement of O2 partial pressure.
The sensors work according to the galvanic cell
principle. The gas mixture to be monitored diffuses
through a plastic membrane into the sensor's liquid
electrolyte. The electrolyte contains a working
elektrode (gold electrode) and a counter-electrode
(lead electrode). The oxygen to be monitored is
electrochemically reduced at the working electrode.
6850930
Filter for T-piece for sample gas
In combination with Y-piece with temperature output.
D-12331-2009
D-19380-2009
E
8600224
D-11942-2009
G T-piece for sample gas (Pediatrics)
For sidestream measurement in combination
with Y-piece with temperature output.
D
F
8600225
MT-422-2002
F
C
G
MT-2962-93
E
MT-82-99
C
| 13
PRIMUS & MORE
PRIMUS
PRIMUS IE
ACCESSORIES FOR GAS AND FLOW MEASUREMENT
FLOW MEASUREMENT
A
A
Spirolog® flow sensor, set of 5 pcs.
8403735
B
SpiroLife® flow sensor
The SpiroLife flow sensor is the only sensor
wich combines the advantages of the hot-wire
anemometer technology with a considerably
prolonged service life as well as the possibility
of sterilization.
MK01900
Infinity® ID Flowsensor, set of 5 pcs.
Equipped with RFID-Tag to support the
Infinity-functionality.
6871980
B
MT-2696-2004
C
FILTRATION
Microbial filter 654 ST
Set of 5 for breathing system, to recycle.
Reusable filter to protect the patient and the device
against bacterial contamination. For breathing system
(isolic). Lifespan: this filter should be sterilized at
134 °C after each use. The filter can be sterilized
24 times.
C
6733895
MT-2086-2007
D
MT-2667-2004
14 |
D
MX00001
Drägersorb® Free, 5 l
Soda lime in pellet form with color indicator from
white to violet. For the absorption of carbon dioxide
(CO2) from breathing gas in inhalation anesthesia
machines with rebreathing system. Used with
Sevoflurane, Drägersorb® Free prevents generation
of Compound A and Carbon Monoxide.
MX50050
E
MT-362-99
F
Drägersorb® 800+, 5 l
Soda lime in pellet form with color indikator from
white to violet. For the absorption of carbon dioxide
(CO2) from breathing gas in inhalation anesthesia
machines with rebreathing system.
F
MT-625-2001
E
MT-865-2002
SODA LIME
PRIMUS
PRIMUS IE
PRIMUS & MORE
ACCESSORIES FOR GAS AND FLOW MEASUREMENT
A
A
CLIC adapter
To use the CLIC absorber.
MX50090
B
CLIC Absorber 800+, 1.2 l, set of 6 pcs.
The CLIC absorber for Dräger anesthesia
machines is attached to the existing absorber
holder by means of an adapter. A quick,
clean, easy-to-use disposable solution.
The CLIC Absorber 800+ is filled with
Drägersorb® 800+, 1.2 l.
MX00004
Infinity® ID CLIC Absorber 800+, set of 6 pcs.
Disposable soda lime cartridge with RFID tag,
filled with Drägersorb 800+.
MX50004
CLIC Absorber Free, 1.2 l, set of 6 pcs.
The CLIC absorber for Dräger anesthesia
machines is attached to the existing absorber
holder by means of an adapter. A quick,
clean, easy-to-use disposable solution.
The CLIC Absorber Free is filled with
Drägersorb® Free,1.2 l.
MX50100
Infinity® ID CLIC Absorber Free, set of 6 pcs.
Disposable soda lime cartridge with RFID tag,
filled with Drägersorb Free.
MX50120
MT-1999-2008
C
D-15686-2009
D
B
D
MT-2003-2008
C
D-566-2009
CLIC ABSORBER
| 15
PRIMUS & MORE
PRIMUS
PRIMUS IE
16 |
VENTILATION SETS
A
7. VENTILATION SETS
A
Breathing set, adult
Complete set for standard anesthesia ventilation.
M30146
B
Breathing set, pediatric
Consisting of: Y-pieces, breathing circuits P,
breathing bag, double connector,
catheter connector, caps and test bellows P.
M33681
Conversion kit Children’s Circuit Set
Consisting of: 3 circuits for children,
breathing bag 0.5 l, Y-piece 90°,
angled LuerLock connector, nozzle.
M27542
MT-0813-2008
REUSABLE VENTILATION SETS
MT-0812-2008
B
C
D
Vent Set Basic
Disposable standard breathing system.
Consisting of 2 circuits, Y-piece and
LuerLock elbow. Material of circuits:
EVA (Ethylene vinyl acetater).
Length of circuits: 1.5 m.
MP00300
Vent Set Flex
Disposable standard breathing system.
Consisting of 2 extendable circuits,
Y-piece, LuerLock-elbow.
Material of circuits: PP (Polypropylene).
Length of circuits: up to 1.8 m.
MP00305
D
MT-041-2006
C
MT-038-2006
DISPOSABLE VENTILATION SETS WITHOUT RFID
PRIMUS
PRIMUS IE
PRIMUS & MORE
A
Anesthesia Set Basic latex-free
Disposable standard anesthesia set.
Consisting of 2 circuits (1.5 m,
EVA (Ethylene vinyl acetater)), Y-piece,
LuerLock-elbow, single circuit (80 cm),
EVA + connector + 2 l breathing bag, latexfree.
MP00301
B
Anesthesia Set Basic latex
Disposable standard anesthesia set.
Consisting of 2 circuits (1.5 m), EVA
(Ethylene vinyl acetater)), Y-piece,
LuerLock-elbow, single circuit (80 cm, EVA)
+ connector + 2 l breathing bag, latex.
MP00302
Anesthesia Set Flex latex-free
Disposable standard anesthesia set.
Consisting of 2 extendable circuits (up
to 1.8 m, PP (Polypropylene)), Y-piece,
LuerLock-elbow, single extendable circuit
(up to 80 cm, PP) + connector
+ 2 l breathing bag, latexfree.
MP00303
Anesthesia Set Flex latex
Disposable standard anesthesia set.
Consisting of 2 extendable circuits (up
to 1.8 m, PP (Polypropylene)), Y-piece,
LuerLock-elbow, single extendable circuit
(up to 80 cm, PP) + connector
+ 2 l breathing bag, latex.
MP00304
Vent Set Coax
Disposable coaxial breathing system with
LuerLock-elbow, 1.5 m.
MP00315
E
MT-036-2006
MT-039-2006
C
D
MT-040-2006
D
B
E
MT-5713-2006
C
A
MT-37-2006
VENTILATION SETS
| 17
PRIMUS & MORE
PRIMUS
PRIMUS IE
VENTILATION SETS
MP00330
VentStar® Anesthesia (P) without LuerLock
Disposable standard anaesthesia set for paediatrics,
consisting of 2 hoses (150 cm, EVA), Y-piece,
closed angle piece, breathing bag set: single hose
(110 cm, EVA) with connector and latex-free 1 l
breathing bag as well as fastening ring for positioning
the breathing bag on the anaesthesia delivery system.
The circuit diameter of 15 mm is specially designed
for paediatric patients. Paediatric pertaining to an
individual weighing between 5 and 40 kg.
Additional information: this breathing circuit may
also be used on the Zeus.
MP00331
VentStar® Basic (P) 150 without LuerLock
Disposable standard breathing circuit (pediatric),
consisting of 2 hoses, Y-piece and elbow. Material
of hoses: EVA. Length of hoses: 150 cm. The circuit
diameter of 15 mm is specially designed for paediatric
patients. Pediatric pertaining to an individual weighing
between 5 and 40 kg. Additional information:
this breathing circuit may also be used on the Zeus.
MP00338
C
C
C
VentStar® Bag Set 80
VentStar® Bag Set 120
VentStar® Bag Set 150
MP00222
MP00380
MP00381
D
VentStar® Bag Set (P) 110
Disposable breathing bag set (paediatric) for use
with anaesthesia delivery systems, as a reservoir
during automatic ventilation and as a manual breathing
bag during manual ventilation. Fastening ring for
convenient positioning of the breathing bag set
on the anaesthesia delivery system.
Bag:1 l latex free; connection hose: 110 cm/EVA.
The circuit diameter of 15 mm is specially designed
for paediatric patients. Paediatric pertaining to an
individual weighing between 5 and 40 kg.
Additional information: This breathing bag set may
also be used on the Zeus.
MP00384
D-560-2009
B
C
D-10106-2009
B
A
MT-326-2008
VentStar® Anesthesia without LuerLock
Disposable standard anesthesia set, consisting
of 2 hoses (150 cm, EVA), Y-Piece, closed angle
piece, breathing bag set: single hose (80 cm, EVA)
with connector and latex free 2 l breathing bag as
well as fastening ring for positioning the breathing
bag on the anesthesia delivery system.
Packaging unit: 25 pcs. Additional information:
this anesthesia set may also be used on the Zeus®.
A
D
D-562-2009
18 |
PRIMUS
PRIMUS IE
PRIMUS & MORE
VENTILATION SETS
DISPOSABLE VENTILATION SETS WITH RFID
MP00340
Infinity® ID Breathing Circuit Smoothbore, 300 cm
Infinity® ID disposable breathing circuit, for adults,
equipped with RFID-Tag to support the Infinityfunctionality, length 300 cm, smoothbore, gas
leading components PVC free, biocompatible
and also suitable for use with anesthetic agents,
latex free.
MP01325
D-19275-2009
Infinity® ID Breathing Circuit Smoothbore, 150 cm
Infinity® ID disposable smoothbore breathing circuit
(adult), equipped with RFID-Tag to support the
Infinity-functionality, length 150 cm, smoothbore,
gas leading components PVC free, biocompatible
and also suitable for use with anesthetic agents,
latex free.
B
D-19280-2009
A
A
C
MP00342
B
Infinity® ID Breathing Circuit Watertrap, 180 cm
Infinity® ID disposable breathing circuit, for adults,
equipped with RFID-Tag to support the Infinityfunctionality, length 180 cm, with water trap
(inspiratory and expiratory), gas leading
components PVC free, biocompatible and
also suitable for use with anesthetic agents,
latex free.
MP01326
C
Infinity® ID Breathing Circuit Basic (Ped), 180 cm
Infinity® ID disposable breathing circuit (pediatric),
equipped with RFID tag to support the Infinityfunctionality, length 180 cm, hose diameter 15 mm,
gas leading components PVC free, biocompatible
and also suitable for use with anesthetic agents,
latex free.
MP01340
Infinity® ID Breathing Bag Set, 120 cm
Infinity® ID disposable breathing bag set (adult),
equipped with RFID-tag to support the Infinityfunctionality, 120 cm breathing bag hose +
2 l breathing bag incl. fixation ring for positioning
the breathing bag on the anaesthesia delivery
system, gas leading components PVC free,
biocompatible and also suitable for usage
with anesthetic agents, latex free.
MP00341
D-19282-2009
Infinity® ID Breathing Circuit Coaxial, 160 cm
Infinity® ID disposable coaxial-breathing circuit,
equipped with RFID-Tag to support the Infinityfunctionality, length 150 cm, coaxial (hose-in-hose),
gas leading components PVC free, biocompatible
and also suitable for use with anesthetic agents,
latex free.
| 19
PRIMUS & MORE
PRIMUS
PRIMUS IE
20 |
VENTILATION SETS
Infinity® ID Breathing Bag Set, 150 cm
Infinity® ID disposable breathing bag set, for adults,
equipped with RFID-tag to support the Infinity-functionality,
150 cm breathing bag hose + 2 l breathing bag incl.
fixation ring for positioning the breathing bag on the
anaesthesia delivery system, gas leading components
PVC free, biocompatible and also suitable for usage
with anesthetic agents, latex free.
MP01330
B
Infinity® ID Breathing Bag Set (Ped), 110 cm
Infinity® ID disposable breathing bag set (pediatric),
equipped with RFID tag to support the Infinityfunctionality, 110 cm long manual breathing bag
hose (hose diameter 15 mm) with 1 l breathing
bag, incl. fixation ring for positioning the breathing
bag set on the anesthetic device, gas leading
components PVC free, biocompatible and also
suitable for use with anesthetic agents, latex free.
MP01343
A
D-19287-2009
A
D-19291-2009
B
PRIMUS
PRIMUS IE
PRIMUS & MORE
VENTILATION SETS
Y-PIECES AND CONNECTORS
A
Y-piece
For masks with ISO connectors and standard
connectors, with 10 mm socket connectors.
8412220
B
Y-piece Luer-Lock
For sampling test gas near the patient, connection
can be rotated through 360°, polyamide, electrically
conductive, for masks with ISO connections and
standard connectors.
M33278
C
Y-piece 90°, ISO
Without Luer-Lock connector, polyamide,
with 22 mm socket connector.
M25682
D
Y-piece straight, ISO
Straight, polyamide for masks with ISO-connectors.
M25650
E
Y-piece 90°, pediatric
For masks with ISO connectors and standard
connectors, with 10 mm socket and
suction opening.
8403075
F
Y-piece straight, pediatric
Made of polysulphone, for the connection
of breathing circuits to pediatrics masks.
M27077
MT-0809-2008
B
MT-392-98
C
MT-0805-2008x
MT-2728-2004
E
F
MT-520-2002
M25647
D
G
MT-0732-2008
G Double connection, ISO
Double connector, polyamide, with two
22 mm connectors.
MT-0808-2008
A
| 21
PRIMUS & MORE
PRIMUS
PRIMUS IE
22 |
DISPOSABLE FILTERS AND HMEs
8. DISPOSABLE FILTERS AND HMEs
A
A
Filter/HME Twinstar® 55
Combination of high performance breathing
system filter and efficient heat and moisture
exchanger for adult use.
MP01805
MT-11164-2006
FILTERS/HMEs
B
B
Filter SafeStar® 55
High performance mechanical HEPA breathing
system filter for adult use.
MP01790
MT-11165-2006
MECHANICAL FILTER
C
ELECTOSTATIC FILTER
MT-0011-2007
MP01770
HME
D
D
HME HumidStar® 55
Heat and moisture exchanger with high heat
and moisture return for adult use.
MP01730
E
HME HumidStar® 2
Heat and moisture exchanger with high heat and
moisture return for neonatal use.
MP01745
MT-11163-2006
Filter CareStar® 30
High performance electrostatic breathing
system filter for adult and pediatric use.
E
MT-11160-2006
C
PRIMUS & MORE
DISPOSABLE FILTERS AND HME S
SPECIFICATIONS
Deadspace (ml)
Recommended tidal volume (ml)
Bacterial retention* (%)
Viral retention* (%)
Filtration method
Moisture loss** (mg H2O/l air)
Moisture output (mg H2O/l air)
Resistance at 30 l/min (mbar)
Weight (g)
ISO connectors
Sampling port
Housing
Maximum duration of use
Shelf life in undamaged packaging
Product
Filter / HME TwinStar® 55
55
300 to 1500
99.999
99.99
electrostatic
7.2 @ Vt 500 ml
36.8
0.9
28
22M/15F – 22F/15M
Luer-Lock
with tethered cap
Polypropylene
24 hours
3 years
PVC-free/Latex-free
Filter SafeStar® 55
55
300 to 1500
99.9999
99.9999
mechanical (HEPA***)
–
–
1.3
39
22M/15F – 22F/15M
Luer-Lock
with tethered cap
Polypropylene
24 hours
5 years
PVC-free/Latex-free
Cleanroom manufactured according to EN ISO 14644-1:1999
SPECIFICATIONS
Compressible volume (ml)
Recommended tidal volume (ml)
Moisture loss** (mg H2O/l air)
Moisture output (mg H2O/l air)
Resistance
Weight (g)
ISO connectors
Sampling port
Housing
Maximum duration of use
Shelf life in undamaged packaging
Product
HME HumidStar® 55
55
300 to 1500
6.3 @ Vt 500 ml
37.7
0.4 @ 30 l/min
28
22M/15F – 22F/15M
Luer-Lock
with tethered cap
Polypropylene
24 hours
5 years
PVC-free/Latex-free
Cleanroom manufactured according to EN ISO 14644-1:1999
*According to Nelson Laboratories, Inc. Salt Lake City, USA.
**According to ISO EN 9360-1:2000
***According to ISO EN 1822-1:1998
HME HumidStar® 2
2
10 to 30
6.4 @ Vt 50 ml
37.6
1.9 @ 15 l/min
3.5
15M – 15F
–
Styrene-butadiene
24 hours
5 years
PVC-free/Latex-free
Filter CareStar® 30
30
100 to 1500
99.999
99.99
electrostatic
–
–
0.6
23
22M/15F – 22F/15M
Luer-Lock
with tethered cap
Polypropylene
24 hours
3 years
PVC-free/Latex-free
| 23
PRIMUS & MORE
PRIMUS
PRIMUS IE
24 |
REUSEABLE VENTILATION ACCESSORIES
9. REUSEABLE VENTILATION ACCESSORIES
A
ANESTHESIA AND VENTILATION MASKS
2165732
All-round mask, size 2
2165740
All-round mask, size 3
2165759
Sealing plug
M14737
MT-22-97
All-round mask, size 1
The all-round mask is made of silicone and
can therefore be used with latex sensitive patients.
B
MT-0729-2008
A
FOREGGER MASKS
Foregger mask, size 1
The Foregger reusable anesthesia and ventilation mask
is made of silicone elastomer and can therefore be
used with latex sensitive patients.
2165910
Foregger mask, size 2
2166097
Foregger mask, size 3
2166100
Foregger mask, size 4
2166119
RENDELL-BAKER MASKS
C
Rendell-Baker mask, size 0
Rendell-Baker mask is for children,
made of rubber, with 22 mm connectors.
M22764
Rendell-Baker mask, size 1
M14631
Rendell-Baker mask, size 2
M14632
Rendell-Baker mask, size 3
M14633
MT-0731-2008
C
B
PRIMUS
PRIMUS IE
PRIMUS & MORE
REUSEABLE VENTILATION ACCESSORIES
SILICONE BREATHING BAGS
Breathing bag, silicone 1.5 l
2166127
Breathing bag, silicone 2.3 l
2166062
Breathing bag, silicone 3 l
2166070
LATEX BREATHING BAGS
B
MT-0810-2008
2166054
B
MT-0811-2008
Breathing bag, silicone 0.5 l
Transparent breathing bag of silicone elastomer,
the latex-free solution.
Breathing bag, latex 0.5 l
True Blue Latex breathing bag.
2165686
Breathing bag, latex 1.5 l
2165953
Breathing bag, latex 2 l
2165694
Breathing bag, latex 2.3 l
2165708
Breathing bag, latex 3 l
2165716
C
MT-0164-2006
A
A
D
C
D
Resuscitator MR-100, adult
Reusable, manual resuscitator for adults,
including mask and oxygen reservoir for
additional oxygen.
5702881
Resuscitator MR-100, child
5702321
Resuscitator MR-100, infant
5702322
Oxidem 3000
2M86296
Hook
Hook for accessories, e.g. breathing bag.
M26349
MT-0726-2008
RESUSCITATOR
| 25
PRIMUS & MORE
PRIMUS
PRIMUS IE
26 |
DISPOSABLE BREATHING MASKS
10. DISPOSABLE BREATHING MASKS
LiteStar® face mask, without hook ring
LiteStar® anesthesia face mask is disposable.
The teardrop shape of the mask ensures an
anatomical fit. The transparent mask body allows
for continuous observation of the patient's vital
signs. The white reinforcing ring placed around
the mask connector provides safe connection with
breathing circuit systems. Additional hook rings
and headgears for fixation are available.
Packaging unit: 30 pcs.
MT-10994-2006f
A
A
LiteStar® face mask,
size 1, neonate
MP01501
LiteStar® face mask,
size 2, infant
MP01502
LiteStar® face mask,
size 3, toddler
MP01503
LiteStar® face mask,
size 4, small
MP01504
LiteStar® face mask,
size 5, medium
MP01505
LiteStar® face mask,
size 6, large
MP01506
PRIMUS
PRIMUS IE
PRIMUS & MORE
DISPOSABLE BREATHING MASKS
B
ComfortStar® anesthesia face mask with hook ring
ComfortStar® anesthesia face mask is disposable.
The teardrop or round shape of the mask ensures an
anatomical fit with effective seal (by inflating or deflating
the mask cushion).The ComfortStar masks sizes 4-6 are
equipped with slip-stop ridges to provide a safe and no-slip
grip. All ComfortStar masks dispose of colored hook rings
for easier size identification. Headgears for fixation are
available. ComfortStar masks are available as scented
and non-scented versions, for adult and pediatric
applications. Packaging unit: 20 pcs.
MT-4205-2008
A
ComfortStar® anesthesia face mask, standard,
size 0, neonate
MP01510
ComfortStar® anesthesia face mask, standard,
size 1, new born
MP01511
ComfortStar® anesthesia face mask, standard,
size 2, infant
MP01512
ComfortStar® anesthesia face mask, standard,
size 3, toddler
MP01513
ComfortStar® anesthesia face mask, standard,
size 4, small adult
MP01514
ComfortStar® anesthesia face mask, standard,
size 5, medium adult
MP01515
ComfortStar® anesthesia face mask, standard,
size 6, large adult
MP01516
ComfortStar® anesthesia face mask, strawberry scented,
size 1, new born
MP01521
ComfortStar® anesthesia face mask, strawberry scented,
size 2, infant
MP01522
ComfortStar® anesthesia face mask, strawberry scented,
size 3, toddler
MP01523
ComfortStar® anesthesia face mask, strawberry scented,
size 4, small adult
MP01524
B
MT-4170-2008
A
| 27
PRIMUS & MORE
PRIMUS
PRIMUS IE
A
B
ComfortStar® anesthesia face mask, bubble gum scented,
size 1, new born
MP01531
ComfortStar® anesthesia face mask, bubble gum scented,
size 2, infant
MP01532
ComfortStar® anesthesia face mask, bubble gum scented,
size 3, toddler
MP01533
ComfortStar® anesthesia face mask, bubble gum scented,
size 4, small adult
MP01534
ComfortStar® anesthesia face mask, mint scented,
size 3, toddler
MP01543
ComfortStar® anesthesia face mask, mint scented,
size 4, small adult
MP01544
ComfortStar® anesthesia face mask, mint scented,
size 5, medium adult
MP01545
ComfortStar® anesthesia face mask, mint scented,
size 6, large adult
MP01546
A
MT-4126-2008
DISPOSABLE BREATHING MASKS
B
MT-4149-2008
28 |
PRIMUS
PRIMUS IE
PRIMUS & MORE
DISPOSABLE BREATHING MASKS
ADDITIONAL MASK ACCESSORIES
Headgear, reusable, silicone, large
MP01558
Headgear, disposable, soft fabric, small
MP01559
Headgear, disposable, soft fabric, large
MP01560
Headgear, disposable, soft rubber, small
MP01561
Headgear, disposable, soft rubber, large
MP01562
Two-sided pump ball
MP01590
O2 MASKS
F
Oxygen mask
For adults, under skin with circuit
(length: 2.1 m), 50 pcs.
G Oxygen mask with reservoir
For adults, under skin with circuit and reservoir
(length: 2.1 m), 50 pcs.
MT-11189-2006
MP01557
B
MT-9815-2006
Headgear, reusable, silicone, small
C
MT-9813-2006
E
MP01552
MX30101
D
MX30108
MT-9814-2006
D
Hook Ring for LiteStar® masks 3–6
E
MT-11178-2006
C
MP01551
F
MT-0807-2008
B
Hook Ring for LiteStar® masks 1–2
G
MT-2359-2004
A
A
| 29
PRIMUS & MORE
PRIMUS
PRIMUS IE
PULSE OXIMETRY SENSORS
11. PULSE OXIMETRY SENSORS
SpO2 adhesive sensor, Max N,
neonates up to 3 kg,
adults from 40 kg
Adults and neonates < 3 kg
or > 40 kg, 24 pcs., latex free.
MT-152-2003
B
MX50067
MT-154-2003
D
SpO2 adhesive sensor, Max I,
1 kg–20 kg
Children 1–20 kg, 24 pcs., latex free.
MX50066
MX50068
Adhesive sensor Max R
For nose of an adult, 24 pcs., latex free.
MX50069
F
MAX-FAST
Forehead, > 10 kg,
4 adhesive tapes, latex free.
MX50070
G MAX-AL
Adults > 30 kg, cable 90 cm,
24 pcs., latex free.
MT-156-2003
E
C
D
MX50071
MT-158-2003
C
SpO2 adhesive sensor, Max P,
10 kg–50 kg
Children 10–50 kg, 24 pcs., latex free.
MX50065
E
MT-162-2003
B
SpO2 adhesive sensor, Max A,
adult > 30 kg
Adults > 30 kg, cable 45 cm, 24 pcs., latex free.
F
MT-164-2003
A
A
G
MT-166-2003
30 |
PRIMUS
PRIMUS IE
PRIMUS & MORE
PULSE OXIMETRY SENSORS
CABLES
8600859
SpO2 basic cable, 1.5 m
M35371
SpO2 basic cable, 2.4 m
M35370
MT-2639-91
SpO2 sensor extension cable, 2.6 m
B
MT-2660-2004
8201015
MONITORING COMBINATIONS
12. MONITORING COMBINATIONS
Primus and Primus Infinity ® Empowered have an
open inter face architecture and can be equipped
with hemodynamic monitoring. Dräger offers
CE-certified combinations for many hemodynamic
monitors.
Ask your sales representative for an updated list of
approved mounting and monitoring combinations.
MT-158-2003
B
SpO2 sensor extension cable, 1.3 m
MT-162-2003
A
A
| 31
HEADQUARTERS
www.draeger.com
REGION EUROPE CENTRAL
AND EUROPE NORTH
REGION MIDDLE EAST, AFRICA,
CENTRAL AND SOUTH AMERICA
Dräger Medical GmbH
Moislinger Allee 53–55
23558 Lübeck, Germany
Tel +49 451 882 0
Fax +49 451 882 2080
info@draeger.com
Dräger Medical GmbH
Branch Office Dubai
Dubai Healthcare City
P.O. Box 505108
Dubai, United Arab Emirates
Tel + 971 436 24 762
Fax + 971 436 24 761
contactuae@draeger.com
REGION EUROPE SOUTH
REGION ASIA / PACIFIC
Dräger Médical S.A.S.
Parc de Haute Technologie d’Antony 2
25, rue Georges Besse
92182 Antony Cedex, France
Tel +33 1 46 11 56 00
Fax +33 1 40 96 97 20
dlmfr-contact@draeger.com
Draeger Medical South East Asia Pte Ltd
25 International Business Park
#04-27/29 German Centre
Singapore 609916, Singapore
Tel +65 6572 4388
Fax +65 6572 4399
asia.pacific@draeger.com
Manufacturer:
Dräger Medical GmbH
23542 Lübeck, Germany
The quality management system at
Dräger Medical GmbH is certified
according to ISO 13485, ISO 9001
and Annex II.3 of Directive
93/42/EEC (Medical devices).
90 66 150 | 09.10-2 | Marketing Communications | LSL | LE | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2010 Drägerwerk AG & Co. KGaA
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
Download PDF