CAVS | DVD-103G | Operating instructions | CAVS DVD-103G Operating instructions

INSTRUCTIONS
MPEG-4
SUPER CD+G
CD+GRAPHICS
ECHO
-
Before operation
2
Preparations
5
Basic operations
7
Advanced operations
10
Karaoke operations
14
Audio/Video files playback
15
Changing the initial settings
17
Additional information
21
ECHO
+
AY
PL
MPX
Digital Direct Progressive Scan
For Customer Use:
Enter below the Model No. and Serial
No. which are located on the rear,
bottom or side of the cabinet. Retain
this information for future reference.
Model No.
Serial No.
Warnings, Cautions and Others
Mises en garde, precautions et indications diverses
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
For U.S.A.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
For Canada/Pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND
For Canada/Pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B
LIMITS FOR RADIO NOISE EMISSIONS FORM DIGITAL
APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED "DIGITAL APPARATUS,"
ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE
BRUITS RADIO ELECTRIQUES APPLICABLES AUX APPAREILS
NUMERIQUES DE CLASSE B PRESCRITES DANS LA
NORMESUR LE MATERIEL BROUILLEUR: "APPAREILS
NUMERIQUES", NMB-003 EDICTEE PAR LE MINISTRE DES
COMMUNICATIONS.
CAUTION
ATTENTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Caution - STANDBY/ON
Disconnect the mains plug to shut the power off completely. The POWER
button on the remote control does not disconnect the mains line when the
POWER button on the front panel is pressed in.
When the player is on standby, the POWER button is pressed in.
When the player is on standby, the power can be controled by
remote control.
IMPORTANT FOR LASER PRODUCTS
IMPORTANT POUR LES PRODUITS LASER
1. CLASS 1 LASER PRODUCT
2. CAUTION : Do not open the top cover. There are no user
serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION : Visible and invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL : CAUTION LABEL, PLACED INSIDE
THE UNIT.
1. PRODUIT LASER CLASSE 1
2. ATTENTION : N'ouvrez pas le couvercle superieur. II n'y aucune
piece reparable par l'utilisateur a I'interieur de I'appareil; confiez toute
reparation a un personnel qualifie.
3. ATTENTION : Risque de radiations laser visible et invisible quand
l'appareil est ouvert ou que le systeme de verrouillage ne fonctionne
pas ou a ete mis hors service. Evitez toute expositon directe au
rayon.
4. REPRODUCTION DE L'ETIQUETTE : ET QUETTE CE
PRECAUTION PLACEE L'INTERIEUR DE L'APPAREIL.
CAUTION: Visible
and invisible laser
radiation when
open and
interlock failed or
defeated. AVOID
DIRECT
EXPOSURE TO
BEAM.
(e)
ADVARSEL:
Synlig og usynlig
laserstraling nar
maskinen er aben
eller interlocken
fejler. Undga
direkte
eksponering til
straling.
(d)
VARNING: Synlig
och osynlig
laserstralning nar
den oppnas och
sparren ar
urkopplad.
Betrakta ej
stralen.
(s)
VARO: Avattaessa
ja suojalukitus
ohitettuna tai
viallisena olet alttiina
nakyvalle ja
nakymattomalle
lasersateilylle. Valta
sateen
kohdistumista
suoraan itseesi. (f)
CAUTION :
Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
Do not place any naked flame sources, such as lighted candles,
on the apparatus.
When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be followed strictly.
Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
ATTENTION :
Ne bloquez pas les orifices ou les trous de ventilation.
(Si les orifices ou les trous de ventilation sont bloques par un
journal un tissu, etc., la chaleur peut ne pas etre evacuee
correctement de I'appareil.)
Ne placez aucune source de flame nue, telle qu'une bougie, sur
l'appareil.
Lors de la mise au rebut des piles, veuillez prendre en
consideration les problemes de I'environnement et suivre
strictement les regles et les lois locales sur la mise au rebut des
piles.
N'exposez pas cet appareil a la pluie, a I'humidite, a un
egouttement ou a des eclaboussures et ne placez pas des objets
remplis de liquide, tels qu'un vase, sur I'appareil.
Afin d'eviter tout risque d'electrocution, d'incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas
ouvrir le coffret de l'appareil.
2. Ne pas exposer I'appareil a la pluie ni a l'humidite.
G-1
Important Product Safety
Instruction
Electrical energy can perform many useful functions.
But improper use can result in potential electrical shock or
fire hazards. This product has been engineered and
manufactured to assure your personal safety. In order not
to defeat the built-in safeguards, observe the following
basic rules for its installation, use and servicing.
ATTENTION: Follow and obey all warnings and
instructions marked on your product and its operating
instructions. For your safety, please read all the safety and
operating instructions before you operate this product and
keep this brochure and the operating instructions
packaged with your product for future reference.
INSTALLATION
1. Grounding or Polarization
(A) Your product may be equipped with a polarized
alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
(B) Your product may be equipped with a 3-wire
grounding-type plug, a plug having a third (grounding)
pin. This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
2. Power Sources
Operate your product only from the type of power source
indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product
dealer or local power company. If your product is intended
to operate from battery power, or other sources, refer to
the operating instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire
or electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
5. Ventilation
Slots and openings in the cabinet are provided for
ventilation. To ensure reliable operation of the product and
to protect it from overheating, these openings must not be
blocked or covered.
Do not block the openings by placing the product on a
bed, sofa, rug or other similar surface.
Do not place the product in a built-in installation such
as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
G-2
6. Wall or Ceiling Mounting
The product should be mounted to wall or ceiling only as
recommended by the manufacturer.
ANTENNA INSTALLATION
INSTRUCTIONS
1.Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
2.Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
3.Power Lines
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
USE
1. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. It may fall, causing serious
injury to a child or adult, and serious damage to the
product.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product.
Use a mounting accessory recommended by the
manufacturer and follow the manufacturer's instructions
for any mounting of the product.
Do not try to roll a cart with small casters across
thresholds or deep-pile carpets.
2. Product and Cart Combination
A product and cart combination
should be moved with care,
Quick stops, excessive force,
and uneven surfaces may cause
the product and cart combination
to overturn.
PORTABLE CART WARNING
(Symbol provided by RETAC)
3. Water and Moisture
Do not use this product near water-for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a
wet basement, or near a swimming pool and the like.
4. Object and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage point or
short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
5. Attachments
Do not use attachments not recommended by the
manufacturer of this product as they may cause
hazards.
SERVICING
1. Servicing
If your product is not operating correctly or exhibits a
marked change in performance and you are unable to
restore normal operation by following the detailed
procedure in its operating instructions, do not attempt to
service it yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnal.
2. Damage Requiring Service
a.
b.
c.
d.
e.
f.
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the
product.
If the product has been exposed to rain or water.
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation.
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
performance-this indicates a need for service.
3. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
4. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in safe
operating conditions.
6. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
7. Heat
The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
G-3
.........................................
Supplied accessories
Table of contents
Check that you have all the following accessories supplied
to you. If anything is missing, consult your dealer
immediately.
Before operation .................................... 2
About playable media .....................................................2
Care and handling of discs .............................................2
Names of parts and controls ...........................................3
* Audio/video cable (Yellow/White/Red)
* Remote control unit
* R6(SUM-3)/AA(15F) battery x 2
* AC power plug adaptor
* User’s Manual
Preparations ........................................... 5
Connections ....................................................................5
Using the remote control unit ..........................................6
About this manual
The display window information and OSD (On Screen
Display) menu items are put in CAPITAL letters in the
operation procedures.
Usable disc(s) for each operation/function is (are) referred
to by the icons;
DVD
VIDEO
Super
CD+G
Video
CD
CD
Graphics
Audio
CD
Precautions
Notes on the power cord
When you are away on travel or otherwise for an extendes
period of time, remove the plug from the wall outlet.
When unplugging the player from the wall outlet, always pull
the plug, not the power cord.
Do not handle the power cord with wet hands!
Avoid moisture, water and dust
Do not place the player in moist or dusty places.
If water gets inside the player, turn off the power and
remove the plug from the wall outlet, then consult your
dealer. Using the player in this state may cause a fire or
electrical shock.
Avoid high temperatures
Do not expose the player to direct sunlight or place it
near a heating device.
Basic operations .................................... 7
Turning on/off the player .................................................7
Initial setup .....................................................................7
Basic playback ................................................................8
Various speed playback ..................................................9
Locating the beginning of a scene or song ...................9
Advanced operations ...........................10
Playing from a specific position ....................................10
Changing the playback order ........................................11
Repeat playback ...........................................................11
Changing the language, sound and scene angle .........12
Special picture/sound effect ..........................................13
Karaoke operations ..............................14
Karaoke operations ......................................................14
Audio/Video files playback ..................15
Outline .......................................................15
Basic operations ...........................................16
Notes on installation
Select a place which is level, dry and neither too hot nor
too cold.
Leave sufficient distance between the player and the TV.
Do not install the player in a place subject to vibrations.
Do not put heavy objects on the player.
To prevent malfunction of the player
There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
Do not insert any metallic objects, such as wires,
hairpins, coins, etc. into the player.
Do not block the vents. Blocking the vents may damage
the player.
To clean the cabinet
Use a soft cloth. Follow the relevant instructions on the
use of chemically-coated cloths.
Do not use benzene, thinner or other organic solvents
and disinfectants. These may cause deformation or
discoloring.
Changing the initial settings ...............17
Selecting preferences ......................................17
Selecting general setup ....................................18
Selecting speaker setup ...................................18
Selecting audio setup ......................................19
Selecting karaoke setup ...................................20
Selecting equalizer .........................................20
Additional information .........................21
Troubleshooting .............................................21
Specifications ...............................................21
1
Discs with the following formats can be played back on the
player.
DVD, MPEG-4, DiVX, Video CD
Super CD+G, CD+Graphics, Audio CD, HDCD
MP3, JPEG, Kodak
The player can also playback the following discs:
DVD-R, DVD+R, DVD-RW, DVD+RW discs
CD-R and CD-RW discs
If a disc gets dirty, dusty, scratched or warped, playback sound
and picture may be deteriorated. Take proper precautions
when handling discs.
Handling
Do not touch the surface
of the disc.
Do not damage, stick
paper to, or use any
adhesive on either the
lable side or playback
side.
If a disc gets dirty, scratched or warped, or due to the disc
characteristics or recording conditions, it may take
considerable time for the player to read the content, or the
player may not be able to playback such discs.
This player accommodates both the NTSC and PAL
systems, and also can play back discs recorded with
NTSC and PAL system.
The player supports the following digital audio formats:
Linear PCM, Dolby Digital 5.1 Channels, DTS
Depending on the player's AUDIO SETUP - SPDIF setting,
digital audio signals may not be output as they are
recorded on the disc.
With some DVD VIDEO discs, the player starts playback
automatically after inserting the disc.
The image may be sometimes poor or noisy due to
defects in the disc itself.
With some discs, operations described in this manual
may not be possible.
2
Storing discs
Keep discs in their cases. If
discs are piled on top of one
another without their protective
cases, they can be damaged.
Do not put discs in a location
where they may be exposed to
direct sunlight, or where the
humidity or temperature is
high.
Avoid leaving discs in a car!
Cleaning discs
Wipe with a soft dry cloth, moving from the center outwards. If
a disc is difficult to clean, wipe with a cloth moistened with
water.
Never use record cleaners, petrol, alcohol or any anti-static
agents.
Front panel
PLAY
PAUSE
STOP
FWD
OPEN/
CLOSE
REV
DVD
MIC
POWER
Power button
MIC 1 Input Jack
MIC 2 Input Jack
MIC 1 Volume Control
Fast Forward
Fast Backward
Open/Close
MIC 2 Volume Control
Play
Pause
Stop
Back panel
L
R
SW
Y
Cb
SL
SR
C
ML
MR
Cr
VIDEO
COXA S-VIDEO OPTICAL
VGA
Analog 5.1 Channel Dolby Audio Outputs
Component Video Outputs
Composite Video Output
2 Channel Downmix Audio Outputs
Coaxial Digital Video Output
SCART
POWER
S-Video Output
Optical Video Output
VGA Video Output
Scart Video Output
Power Cord
Display window
DVD Video format indicator
Turns on when playing back a DVD or MPEG-4 video
format disc.
DTS Audio format indicator
Turns on when playing back a DTS audio format disc.
SVCD / VCD Video format indicator
Turns on when playing back a SVCD or VCD video
format disc.
DOLBY Audio format indicator
Turns on when playing back a DOLBY Digital Sound
audio format disc.
Multiple Angle Video format indicator
Turns on when playing back a Multiple Angle video
format disc.
PBC Video format indicator
Turns on when playing back a Playback Control video
format disc.
MP3 Audio format indicator
Turns on when playing back a MP3 audio format disc.
Playback indicator
Turns on when playback is in progress.
Repeat ALL indicator
Turns on while in the Repeat All mode.
Repeat One indicator
Turns on while in the Repeat One mode.
Play / Pause indicator
Turns on while in playback or in pause.
Multiple Information window
Indicates various kinds of information by numbers and
alphabets, such as the player's current status
("READING", "OPEN", etc.) or currently played
DVD's title and chapter.
3
ECHO -
ECHO +
/EQ
MPX
4
POWER
REPEAT
SUBTITLE
Numeric buttons
MULTI ANGLE
LANGUAGE (AUDIO)
TITLE
3D
SETUP
UP
LEFT, ECHO MENU
DOWN
PLAY
PAUSE
FAST BACKWARD
FAST FORWARD
MUTE
NTSC/PAL
SLOW
STEP
RETURN
PBC
LOWER KEY (PITCH)
RESET KEY (PITCH)
A-B LOOP
OPEN/CLOSE
RANDOM
PROGRAM
ENTER
RIGHT, ECHO +
CLEAR/EQ
ZOOM
STOP
NEXT
PREVIOUS
VOLUME UP
DISPLAY
VOLUME DOWN
TIME
MPX
MIC ON (KARAOKE ON)
RESUME
RAISE KEY (PITCH)
Before using the player, connect the player to a TV and/or
amplifier.
Before making connections
* Do not connect the AC power cord until all other
connections have been made.
* Connect VIDEO OUT of the player directly to the video
input of your TV. Connecting VIDEO OUT of the player
to a TV via a VCR may cause a monitor problem when
playing back a copy-protected disc. You may also have
a monitor problem when connecting the player to an
integrated TV/Video system.
NOTE
* In the following description, "TV" may be substituted
with "monitor" of "projector".
* Terminal names used for other components may be
different from those used in the following description.
The following sections to describe TV connections
where only a TV is connected to the player so that you will
hear sound also from the TV.
Connecting to a conventional TV
Connect the Composite video output of the player to the
video input of TV. Connect the 2 Channel Downmix Audio
outputs to the audio inputs of TV.
Connecting to a TV with an S-Video jack
If your TV has a S-VIDEO input, you can get better picture
quality by connecting it with the S-VIDEO output of the
player using an S-video cable instead of connecting the
composite video input of the TV to the composite video
output of the player.
Connecting to a stereo audio
amplifier / receiver
Connect the player's 2 Channel Downmix audio outputs (ML,
MR) to any line-level inputs (such as AUX, DVD, CD, etc.) of
an audio amplifier or receiver.
Connecting to Analog 5.1 Channel Dolby
amplifier / receiver
Connect the player's Analog 5.1 Channel Dolby audio outputs
(FL, FR, SUB, SL, SR, CEN) to an amplifier or receiver with
5.1 Channel Analog audio inputs.
Connecting to a digital audio device
NOTES
* When using the S-VIDEO output jack, do not connect the
COMPONENT VIDEO OUT jacks on the player.
Connecting to a TV with component jacks
If your TV has COMPONENT video inputs, you can enjoy
picture of high-fidelity color reproduction by connecting it
with COMPONENT video outputs of the player..
NOTES
* Connect "Y" to "Y", "PB" to "PB" (CB), "PR" to "PR" (CR)
correctly.
* When using the COMPONENT video output, do not connect
the S-VIDEO output of the player.
Progressive scan video playback available
In the Progressive scanning mode, you can enjoy high
quality picture with less flickers. The Progressive
scanning mode works only when you connect the player
and TV using COMPONENT video. See “Selecting
preferences” at page 17 for more details.
You can enjoy sound of enhanced quality by connecting the
player's DIGITAL (either OPTICAL or COAXIAL) audio
outputs to a digital audio input of an amplifier or receiver,
using an optical or coaxial digital cable. The digital audio
signal including the Dolby Digital or DTS signal on a disc will
be transferred directly from the player.
NOTE
Connect the player and the digital audio device by using
either an optical digital cable or a coaxial digital cable.
It is not recommended to use the digital jacks for dubbing.
When recording the sounds(DVD VIDEO, Video CD or Audio
CD) played back on the player, record them through the
analog (2 Channels or 5.1 Channels) outputs.
Depending on the disc, no signal may come out from the
DIGITAL outputs. Make an analog connection in this case.
Set SPDIF OUTPUT in the AUDIO SETUP correctly
according to the connected digital audio
equipment. If setting made for SPDIF OUTPUT is
incorrect, loud noise may be generated causing
damage to the speakers.
NOTES
* There are some progressive TV and High-Definition TV sets
that are not fully compatible with the player, resulting in the
unnatural picture when playing back a DVD VIDEO disc in
the Progressive scanning mode. In such a case, use the
Interlaced scanning mode.
5
When all the audio/video connections have been made,
connect the AC power plug first to the player and then to
the wall outlet. Make sure that the plugs are inserted
firmly.
Point the top of the remote control unit toward the remote
sensor as directly as possible. If you operate it from a
diagonal position, the operating range(approx. 5 m) may be
shorter.
Remote sensor
Warning
* Disconnect the power cord:
if you are not going to use the player for a long time.
before cleaning the player.
before moving the player.
* Do not:
connect or disconnect the power cord with wet hands.
pull the power cord when disconnecting it, as this may
damage the cord and cause fire, electric shock, or other
accidents.
DVD
Caution
* Do not alter, twist or pull the power cord, or put anything
heavy on it, which may cause fire, electric shock, or
other accidents.
* If the cord is damaged, consult a dealer and have the
power cord replaced with a new one.
Open the compartment cover, and place the two supplied
R6(SUM-3)/AA(15F) batteries in the remote control unit
according to the polarity marking("+" and "-") inside the
compartment. Then replace the cover.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of
batteries. If they are used improperly their lives will be
shortened, they may burst or their contents may leak.
Remove the batteries from the remote control unit if it
is not going to be used for a long period of time.
Remove dead batteries and dispose of them properly.
Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them into
an incinerator.
Never touch liquid that has leaked out of a battery.
Do not mix new and old batteries, or batteries of
different types, when replacing them.
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic,
replace the batteries.
6
PLAY STOP OPEN/CLOSE
PLAY
PAUSE
STOP
FWD
REV
OPEN/
CLOSE
DVD
When you turn on the player for the first time, you may want to
change the settings in the player according your preferences.
Use / and ENTER buttons to navigate within SETUP
menu.
POWER
POWER
POWER
OPEN/CLOSE
Numeric buttons
SETUP
ECHO
-
Press SETUP.
The MAIN PAGE of SETUP MENU appears.
SET MENU --- MAIN PAGE
ENTER
+
GENERAL SETUP
STOP
AY
PL
PLAY
ECHO
1
SPEAKER SETUP
AUDIO SETUP
MPX
KARAOKE SETUP
PREFERENCES
EXIT SETUP
About invalid operation icon
When you press a button, and if the player does not
accept its operation, appears on your TV screen.
Operations are occasionally unacceptable even if
is not displayed.
Note that some operations may not be accepted. For
example, some discs may not allow rapid
advance/reverse or slow-motion playback.
2
Select OSD language
The default OSD (on-screen display) language is
English. To change, press ENTER to select GENERAL
SETUP and go to OSD LANG. Move to a language of
your choice and press ENTER.
-- GENERAL PAGE -TV DISPLAY
PIC MODE
ANGLE MARK
Press POWER button on the front panel to
turn on the player. The POWER button on the
remote control works only when the POWER
button on the front panel is pressed ON.
The opening display with CAVS logo will appear on the TV
screen.
Even if you turn off the player with the POWER button on
the remote control, the player is not disconnected from
the AC power source as long as the POWER button on
the front panel is turned on. This state is called standby
mode. In this state, the player consumes a very small
amount of power.
ENGLISH
CAPTIONS
FRENCH
SCR SAVER
GERMAN
MAIN PAGE
3
NOTES
OSD LANG
SPANISH
Select TV type.
For a normal (conventional) TV, select NORMAL/PS or
NORMAL/LB. For a wide-screen TV, select WIDE.
-- GENERAL PAGE -TV DISPLAY
NORMAL/PS
PIC MODE
NORMAL/LB
ANGLE MARK
WIDE
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
7
4 Select a desired Audio Output
Select an Audio Output according to your audio
connection.
For COAXIAL or OPTICAL connection to digital amplifier or
receiver:
-- AUDIO SETUP --
CD
Graphics
Audio
CD
1
2
Press OPEN/CLOSE to open the disc tray.
Place a disc in the disc tray.
PRO LOGIC
SPDIF/RAW
3
Press OPEN/CLOSE to close the disc tray.
LPCM OUTPUT
SPDIF/PCM
4
Press PLAY.
The player starts playback from the beginning.
If a menu is shown on the TV screen
When inserting a DVD VIDEO or Video CD disc, a menu may
be shown on the TV screen. From the menu, you can select a
desired item to be played back.
For Analog 5.1 Channel or Stereo (Karaoke) connection:
-- AUDIO SETUP -SPDIF OUTPUT
OFF
PRO LOGIC
SPDIF/RAW
LPCM OUTPUT
SPDIF/PCM
DYNAMIC
MAIN PAGE
Select a desired Speaker Setup
Select according to your speaker connection.
For digital connection through COAXIAL or OPTICAL audio
output, there is no need to adjust the SPEAKER SETUP in
the SETUP menu. The adjustment needs to be made in the
digital amplifier.
For Stereo (Karaoke) audio output, press MIC ON button on
the remote control to set KARAOKE ON.
For Analog 5.1 Channel audio output, press MIC ON button
on the remote control to set KARAOKE OFF. Each of the
channel can further be adjusted in SPEAKER SETUP under
SETUP menu. See “Selecting speaker setup” at page 18.
NOTE
Do not select a digital (SPDIF) output when the player is
connected to TV or an audio system using Analog 5.1
Channel or Stereo (Karaoke) output of the player.
Microphone signal is only outputed through Stereo
(Karaoke) audio output.
8
Video
CD
OFF
MAIN PAGE
6
Super
CD+G
SPDIF OUTPUT
DYNAMIC
5
DVD
VIDEO
Press SETUP to return
The TV screen returns to the opening display.
For DVD VIDEO
1 Press / / / to select a desired item.
2 Press ENTER.
The player starts playback of the selected item.
For Super CD+G
1 Input a song number or press / to select a desired song.
2 Wait for the display of title and press ENTER. The player
starts playback of the selected song.
For Video CD
Press the numeric buttons to select a desired item.
The player starts playback of the selected item.
NOTES
Do not insert an unplayable disc.
When inserting a disc on the disc tray, be sure to position
the disc inside the recess. Otherwise, the disc may be
damaged when the disc tray is closed, or you may not be
able to remove the disc from the player.
If it takes time to read the loaded disc ("READING"
appears on the display window), remove the disc by
pressing OPEN/CLOSE on the remote control and check
the disc.
To check the playback status
Press DISPLAY button on the remote control to see the
current selection number (the title/chapter number for DVD
VIDEO or track number for Video CD/Audio CD), time
information (the time elapsed, or time remaining) on the TV
screen.
To turn off the status bar
Press DISPLAY button repeatedly until the status bar goes
off.
To stop playback temporarily
DVD
VIDEO
Video
CD
While paused, press STEP button.
Each time you press STEP button, the still picture
advances to the next frame.
Pressing PLAY returns to normal playback.
Press STOP button to stop playback.
To resume playback
DVD
VIDEO
Video
CD
DVD
VIDEO
Audio
CD
Press PLAY or RESUME button to resume playback.
Video
CD
During playback, press SLOW button to
play forward slow motion or reverse
slow motion.
Press PLAY to return to normal playback.
To stop playback completely
Press STOP button twice to stop playback completely.
Next time the PLAY button is pressed, the playback will
begin from the beginning of the disc
NOTE
During slow motion playback, the sound will be muted.
For Video CD, the reverse slow motion does not work.
If you press OPEN/CLOSE button during playback, the
player stops playback completely and opens the disc tray.
To pause playback
Press PAUSE button to pause playback. Press PLAY or
PAUSE button again to resume playback.
DVD
VIDEO
Video
CD
CD
Graphics
Audio
CD
During playback, you can skip a chapter or title, depending
on the disc configuration.
To skip forward, press .
To skip backward , press twice.
Using the numeric buttons
DVD
VIDEO
Press the numeric buttons to specify a
chapter or title number.
Video
CD
During playback, press
remote control unit.
The player starts playback from the beginning of the
selection.
or
on the
You can select from 2 times, 4 times, 8 times, and 16
times normal speed. Pressing PLAY returns the player to
normal playback.
NOTE
During rapid playback, the sound will be muted.
About screen saver function
A television monitor may have an image burned into it if a
static image is displayed for a long time. To prevent this,
the player automatically activates the screen saver function
if a static picture, such as an on-screen display or menu, is
displayed for over 5 minutes. When the screen saver
function is activated, the TV screen gets darker. Pressing
any buttons will release the screen saver function.
The screen saver function does not work when playing
back the following sources:
- JPEG/MPEG-4 (while in pause)
- Audio CD
9
DVD
VIDEO
DVD
VIDEO
DVD VIDEO discs generally have their own menus which
show the disc contents. These menus contain various items
such as titles of movies, names of songs, or artist
information, and display them on the TV screen. You can
locate a desired scene using the DVD menu.
1
While a DVD VIDEO disc is inserted, press MENU.
2
Press / / /
press ENTER.
1
Press TITLE.
2
Press / / /
press ENTER.
The TV screen shows available items in the menu.
to select a desired item, then
The player starts playback of the selected item.
Hint
With some discs, you can select items by entering the
corresponding number using the numeric buttons, which
may cause the player to automatically start playback.
The TV screen shows available items in the menu.
to select a desired item, then
The player starts playback of the selected item.
Hint
With some discs, you can select items by entering the
corresponding number using the numeric buttons, which
may cause the player to automatically start playback.
Video
CD
DVD
VIDEO
In stop mode, press PLAY.
2
Press the numeric buttons to select the
desired item.
1
Press TIME twice.
2
Press the numeric buttons (0 to 9) to enter the
desired time.
The menu bar appears on the TV screen.
Example (for DVD VIDEO)
To play back from 2(H):34(M):00(S)
Press 2, 3, then 4.
TIME 2:34:_ _
Example (for Video CD/Audio CD)
To play back from 23(M):40(S)
Press 2, 3, then 4.
A disc menu appears on the TV screen.
TIME
23:4_
You do not have to press "0" to enter the trailing zeros (for
the last two digits in the example above).
The player starts playback of the selected item.
To return to the menu, press RETURN.
To correct a mistake
Press TIME repeatly to reset and reenter a correct one.
Hint
If something like "NEXT" or "PREVIOUS" appears on the TV
screen, pressing
advances to the next page, and pressing
returns to the previous page.
Audio
CD
You can play a disc from the desired position by specifying
the time from the beginning of the current title (for DVD
VIDEO) or the disc (Video CD/Audio CD).
Some Video CD discs support the PBC function. PBC is an
abbreviation of "Playback Control." Some Video CD discs
recorded with PBC have their own menus, such as a list of
the songs of the disc. You can locate a specific scene by
using the PBC menu.
1
Video
CD
3
Press ENTER.
The player starts playback from the specified time.
To dismiss the menu bar
Press TIME.
NOTES
Some DVD VIDEO discs do not contain time information,
and the time search function cannot be used.
The time search function cannot be used during program
playback.
10
CD
Video
CD
Graphics
Audio
CD
DVD
VIDEO
In stop mode, press PROG.
2
Press the numeric buttons to specify track.
3
Press ENTER.
4
Press the number buttons to program the next
track followed by ENTER. Continue to complete
the programming.
5
6
7
Audio
CD
If you press REPEAT in stop mode, press PLAY
to start playback. Each time you press REPEAT, the
repeat mode cycles among REP-ALL, REP-ONE and
OFF. A window which indicates the current repeat mode
will be displayed on the TV screen.
The menu bar appears on the TV screen.
The specified track will be assigned a number of its order.
CD
Graphics
Press REPEAT.
By programming tracks, you can play up to 99 tracks in any
order. You may program the same track more than once.
1
Video
CD
To stop repeat playback
Press STOP. The unit stops playback but does not quit the
repeat mode.
To quit repeat playback
Press REPEAT until REPEAT OFF is displayed.
Press PLAY to start playback.
To stop the program playback, press STOP.
To clear the program, press STOP again.
DVD
VIDEO
NOTES
When the disc tray is opened or the player is turned off, the
program is cleared.
During Audio CD playback, you can select previous or next
tracks by pressing / .
During VCD playback, you cannot search for the portion on
the discs by pressing / .
During program playback, you can repeat playback.
1
Video
CD
Audio
CD
Press A-B at the start of the part you want to
repeat (point A).
The A TO B SET A message appears.
2
Press A-B at the end of the part you want to
repeat (point B).
The A TO B SET B message appears and then changes
to A TO B REPEAT ON. The player begins to repeat
playback between "A" and "B".
CD
Super
VCD
1
2
Graphics
Audio
CD
In stop mode, press RANDOM.
The SUFFLE ON sign will appears on the TV screen and
playback will begin from a random track.
Press STOP to stop and quit random playback
The player stops playback and exits the random playback
mode.
To quit A-B repeat playback
Press A-B to turn off the A-B repeat mode. The A TO B
CANCELLED message will appear and the normal playback
continues.
NOTES
The A and B points must be set in the same
title/chapter/track.
When you press STOP twice during DVD VIDEO playback,
A-B repeat is canceled.
NOTES
During random playback, you can repeat playback.
Random playback mode will be canceled in the following
cases:
- When ejecting the loaded disc
- When turning off the power
11
DVD
VIDEO
DVD
VIDEO
Some DVD VIDEO discs contain more than one subtitle
language. You can choose a desired one from them.
Hint
At the beginning of the part where the subtitles are recorded,
appears on the TV screen.
1
2
3
During playback, press SUBTITLE.
The subtitle selection window appears on the TV screen.
Press SUBTITLE repeatly to make a selection.
Each time you press SUBTITLE, the subtitle language
changes.
Press SUBTITLE repeatly to turn the subtitle off
Press SUBTITLE until SUBTITLE OFF message appears.
The subtitle selection window will automatically disappear
if you do not change the subtitle for several seconds.
(LANGUAGE)
Video
CD
The audio selection setting allows you to change the audio
language of a movie.
Hint
At the beginning of the part where the multiple audio tracks are
recorded,
appears on the TV screen.
1
During playback, press LANGUAGE.
2
Press LANGUAGE repeatly to make a selection.
The audio selection window appears on the TV screen.
Each time you press LANGUAGE, the audio changes.
NOTES
The audio selection window will automatically disappear if you
do not change the audio for several seconds.
12
Hint
At the beginning of a "multi-angle" part,
screen.
appears on the TV
1
During playback, press ANGLE.
2
Press ANGLE repeatly to make a selection.
The angle selection window appears on the TV screen.
Each time you press ANGLE, the angle changes.
NOTE
The angle selection window will automatically disappear if
you do not change the angle for several seconds.
NOTES
DVD
VIDEO
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains "multi-angle" parts, where multiple cameras were used
to shoot the same scene from different angles.
DVD
VIDEO
Video
CD
1
During playback or while paused, press ZOOM.
2
Press
3
To return to normal play, press ZOOM repeatly
until ZOOM OFF message appears.
Pressing ZOOM causes the player to zoom in on the
image. Each time you press ZOOM, the magnification is
changed (1.5, 2 and 3 times).
/ / /
to move the zoomed position.
NOTE
While zoomed, the picture may look coarse.
(3D)
DVD
VIDEO
Super
CD+G
Video
CD
CD
Graphics
Audio
CD
Using the Sound Effect (3D) function, you can change the sound
field. This function is enabled only when Karaoke Setup is ON.
1
Press MIC ON to turn on the Karaoke Setup.
2
During playback, press 3D.
3
Press 3D repeatly to make a selection.
4
Press 3D repeatly to return to normal play.
The Karaoke indication appears on the TV screen.
The Sound Effect (3D) indication appears on the TV screen.
Each time you press the button, the Sound Effect (3D)
mode changes as follows:
NOTE
The Sound Effect (3D) indication disappears if no operation
is made for about few seconds.
13
Super CD+G (SCDG) Operations
DVD
VIDEO
1
Super
CD+G
Video
CD
CD
Graphics
Audio
CD
Press MIC ON to set KARAOKE MODE ON.
This enables the key control and voice cancel (MPX)
features in the player. The SPEAKER SETUP is also
automatically changed to DOWNMIX: STEREO.
Be sure to set SPDIF OUTPUT as OFF in AUDIO
SETUP.
Super
CD+G
1
Insert the SCDG disc into the player.
2
Using numeric buttons, input a song number or
using / buttons, search for a song.
Microphone signal is only outputed through 2 Channel
Downmix (ML/MR) audio output terminals.
2
Wait for the title of the song to appear on the screen.
Press ENTER or PLAY to begin playback
When selecting a song after a rest or other operations
such as changing SETUP menu, it may take longer for the
song title to appear. Be sure to wait for the title before
pressing ENTER or PLAY to begin playback.
Insert a karaoke disc and seleact a song for
playback.
Each disc may require different steps to search through
menus and playback a song.
3
Press ECHO + and ECHO - on the remote control
to adjust the Echo level of microphones.
3
Press VOL + and VOL - buttons on the remote
control to adjust the volume level of playback
music in relation to the microphones.
5
Adjust the key (pitch) of the song by pressing
and
buttons according to your preference.
6
Press MPX button to set OFF / ON the lead vocal
in the song, to practive along or to sing in solo.
In most DVD Karaoke discs, the voice cancel feature is
controled by LANGUAGE button.
The programmed songs will play one song at a time,
waiting for a press of PLAY button at the end of each
song.
To see the list of programmed songs, press PROG. The
list will be displayed at the bottom of the TV screen.
4
To cancel a programmed song, press STOP.
5
To see playback status, press DISPLAY.
If stopped during playback, the song in play will be
canceled. If stopped while waiting for the next
programmed song, the song in waiting will be canceled.
Elapsed time and remaining time of the song will appear
sequentially. Press DISPLAY again to dismiss the
playback status.
Only certain karaoke discs (multiplex format) have
embedded lead vocals that can be set ON or OFF.
6
14
To program next songs, enter the song numbers
followed by pressing of PROG after each entry.
The programmed song will appear on the lower left corner
of the screen. You can program up to 10 songs.
Volume level of each microphone can be controled by
VOL1 and VOL2 controls in the front panel of the
player. Be sure to turn on the microphones.
4
After reading the disc, the initial SCDG screen will appear
on the TV screen..
Press PAUSE to pause the playback. Press
PLAY to resume playback.
Notes for making files/groups
The player can play MP3/JPEG/MPEG-4/DiVX files on a
personally recored media as follows:
CD-R/RW, DVD-R, DVD+R, DVD-RW
Some DVD-R and DVD-RW discs mastered as multi border
(multi-session) may not be compatible with the player.
You can select and play back files using the SMART NAVI display
on the TV screen.
The player may be unable to play back the media due to the
characteristics or recording conditions.
About files and folders (groups) on the disc
Files are sometimes grouped into folders by genre, album,
etc. In this manual, "group" is also referred to "folder."
A folder which has one or more files is regarded as a group.
The player can detect and play back the groups which are
located up to the fifth layer.
The files in the SMART NAVI display are arranged by the
alphabetical order of extensions as follows: "asf", "avi", "divx",
"jpeg", and "mp3".
Time required for reading the media contents may vary for
different media, depending on the numbers of folders
(groups) and files recorded, etc.
Files which do not belong to any folder are grouped into
"group 1."
The player recognizes up to 150 files per group, and up to
250 groups per disc. Files other than MP3 / JPEG / MPEG-4
/ Divx files also count in the 999 total.
Max.250 groups per media
File 1. mp3
File 2. mp3
File 3. mp3
Max.150 files
per group
Group 1
Group 2
Group 4
File 1. jpg
File 2. jpg
File 3. jpg
File 4. jpg
File 4. jpg
File 5. jpg
File 6. jpg
Group 3
If a file name includes even one 2-byte character, the player
may not show the file name correctly.
The player supports up to 12 characters as the group / file
names.
The player can only recognize files with one of the following
extensions, which can be in any combination of upper and
lower case.
- For MP3 files, ".MP3", ".mp3".
- For JPEG files, ".JPG", ".JPEG, ".jpg", ".jpeg".
- For MPEG-4 files, ".ASF", ".asf".
- For DiVX files, ".DIVX", ".DIV", ".divx", "div" and ",".AVI",
".avi"
For MP3 files:
It is recommended that you record your material at 44.1
kHz sampling rate, using the 128 kbps data transfer rate.
ID3 Tag is not available.
MP3i and MP3 Pro are not available.
For JPEG files:
We recommend you to record your material at a 640*480
pixel resolution.
This player supports the baseline JPEG format.
The player does not support a baseline-formatted picture
of more than 5120*3413 pixels. Make sure that the
pictures pixel size is 5120*3413 pixels or less.
This player cannot play back a progressive JPEG file of
more than 2048*1536 pixels.
For MPEG-4 files:
The player supports the AVI files whose resolution is
640*480 pixels or less, and created using 4 Mbps ASP
codec.
The size of the playback screen will be the same size as it
is recorded.
Some recorded files may not be able to be played back
depending on file characteristics, kind of digital still/video
cameras, or recording conditions.
The player can playback the following MPEG-4 files:
MPEG-4 V2: Simple(single) stream
MPEG-4 V3: Fully supported
(MPEG-4 V1 file is not compatible.)
For DiVX files:
The player supports DiVX 5.x, 4.x and 3.11.
The player supports the DiVX files whose resolution is
720*480 pixels or less (30 fps), and 720*576 pixels or less
(25 fps).
Audio stream should conform to MPEG 1 Audio Layer-2 or
MPEG Audio Layer-3(MP3)
The player does not support GMC (Global Motion
Compression) and Q-Pel(Quarter Pixel).
The file encoded in the interlaced scanning mode may not
be played back correctly.
Notes for making your own disc
Use "UDF format" as the disc format for DVD-R/-RW.
Use "ISO 9660" as the disc format for CD-R/RW.
The player does not support "packet writing" for CD-R/RW.
The player supports discs recorded with up to five multiple
sessions.
Some disc may not play due to media characteristics or
recording conditions.
15
When you insert a disc with groups and files, the player will
automatically begin playback of the MP3, JPEG, MPEG-4, or
DiVX contents. Press STOP and the SMART NAVI display
that shows the groups and files will appear on the TV screen.
You can specify and play back the desired group/file from the
SMART NAVI display using the following procedure.
1
To stop playback
Press STOP to stop the playback.
The SMART NAVI display will show the contents of the
disc on the TV screen.
Press STOP.
The SMART NAVI display appears on the TV.
-- SMART NAVI --
NOTES
...
ROOT
CD01
To rotate/reflect a still picture
While the still picture is played back:
Pressing rotates the picture by 90 clockwise.
Pressing rotates the picture by 90 counterclockwise.
Pressing rotates the picture vertically.
Pressing rotates the picture horizontally.
0
MP3 001
1
MP3 002
2
MP3 003
3
MP3 004
4
MP3 005
5
Opening the disc tray stops playback.
It may take time to show the SMART NAVI display due to the
layer configuration of the files and groups.
The elapsed time may be incorrectly indicated on the display
window due to the recording condition of the file.
The display window cannot show the file number more than
100. When the files numbered over 100th are played back,
the player re-counts file number again from 0.
When the screen saver starts, the SMART NAVI display
disappears.
To change PLAY MODE.
PLAY MODE
2
FOLDER
Press / / / to move the bar to a desired
group position and press ENTER.
In the right column, files in the selected group are shown.
3
Press / / /
press ENTER.
to select the desired file, then
The selected file will begin to playback.
When you press ENTER, the continuous playback starts
from the selected file. The playback stops after playing
back of all files in the same FOLDER.
You can also change the files on the list by pressing
/
or the numeric buttons.
To pause playback
Press .
Pressing PLAY resumes normal playback.
To reverse or advance playback rapidly
Press to move the bar to PLAY MODE display. Press
/ to change the PLAY MODE to a desired setting.
PLAY MODE
FUNCTION
SINGLE
SELECTED FILE ONLY
REP - ONE
REPEAT SELECTED FILE
FOLDER
ALL FILES IN FOLDER
FOLDER R
REPEAT ALL FILES IN FOLDER
DISC SCAN
SCAN ALL FILES IN DISC
DISC
ALL FILES IN DISC
DISC R
REPEAT ALL FILES IN DISC
RANDOM
RANDOMLY SELECTED FILES
SUFFLE ON
ALL FILES IN FOLDER AFTER SUFFLE
PROGRAM
PROGRAMMED FILES
Press / during playback of MP3/MPEG-4/DiVX.
Each time you press
( or
), the player reverses (or
advances) playback, rapidly changing the playback speed.
During playback, you can also press REPEAT to change the
PLAY MODE among REP-ONE, FOLDER, and FOLDER R.
To zoom in a picture
To program files
Press ZOOM.
Each time you press ZOOM, the magnification is changed.
The 3 time magnification may not work for some
JPEG/MPEG-4 files according to their resolutions.
Pressing
moves the zoomed position during
playback of JPEG file.
To cancel the zoom function, select the normal size by pressing
ZOOM repeately.
16
Press PROG to change the PLAY MODE to PROGRAM.
Select a file and press ENTER to program. Repeat the process
of selecting a file and pressing ENTER to program. Press
STOP to finish the programming. Press PLAY to start
playback.
SUBTITLE
This section refers to the settings which are already made
when you purchase the player. Read this section when you
want to change settings according to your preferences and
viewing environment.
1
2
3
Press SETUP.
Press
/
to select PREFERENCES.
The color of the selected item changes.
Press ENTER.
The PREFERENCES menu appears on the TV screen.
-- PREFERENCES PAGE -TV TYPE
MULTI
AUDIO
NTSC
SUBTITLE
PAL
DISC MENU
PARENTAL
You can select the default subtitle language to be displayed if it is
contained on a DVD VIDEO disc.
Setting options
OFF, ENGLISH, SPANISH, FRENCH, CHINESE,
GERMAN, ITALIAN, JAPANESE, language code
from AA TO ZU
If the disc does not have a subtitle in the language, the disc's
default language will be used.
You cannot change the setting during playback.
DISC MENU
You can select the default disc menu language to be displayed if it
is contained on a DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN,
ITALIAN, JAPANESE, language code from AA TO ZU
If the disc does not have a subtitle in the language, the disc's
default language will be used.
You cannot change the setting during playback.
PARENTAL
PASSWORD
You can select the level of restriction on DVD VIDEO playback
that contains violent (and other) scenes. For example, if
movie which includes violent scenes supports the parental
rating, such scenes will be cut or replaced with other scenes.
DEFAULTS
Setting options
VIDEO OUTPUT
G, PG, PG-13, PG-R, NC-17, ADULT, NO PARENTAL
To dismiss PREFERECE PAGE display
Press SETUP.
Some of the options are blank in expectation of new ratings
to come in the future.
You cannot change the setting during playback.
VIDEO OUTPUT
NOTES
PREFERENCES cannot be changed during disc
playback.
TV TYPE
Select the TV TYPE to match your TV.
Setting options
MULTI, NTSC, PAL
You can also select the TV TYPE by pressing N/P button on
the remote control.
AUDIO
You can select the default audio language to be displayed
if it is contained on a DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN,
ITALIAN, JAPANESE, language code from AA TO ZU
If the disc does not have the selected language, the disc's
default language will be used.
You cannot change the setting during playback.
You can select the video output to best match your TV for higher
video quality.
Setting options
SVIDEO - For Composite or S-Video connections
YCBCR - For Component connection
SCART - For European connection
YPBPR - For Progressive Scan connection
VGA
- For VGA PC Monitor connection
Your TV may have more than one connection. If available,
use Component output for higher quality video.
You cannot change the setting during playback.
PASSWORD
You can change the password to PREFERENCES SETUP so
that settings within, such as PARENTAL, can only be changed
by you. The factory default password is “3308”. Enter the
current password and new password (twice) to change.
Password must consists of 4 digits.
You cannot change the setting during playback.
DEFAULT
You can re-set the SETUP menu with factory default values. It
will re-set all existing options.
You cannot change the setting during playback.
17
OSD LANG
You can select the on-screen display language of the player.
This section refers to the settings which are already made
when you purchase the player. Read this section when you
want to change settings according to your preferences and
viewing environment.
1
2
3
Setting options
ENGLISH, SPANISH, FRENCH, GERMAN
Some screen messages are shown in English regardless of
the setting.
You cannot change the language shown in SMART NAVI.
Press SETUP.
Press
/
to select GENERAL SETUP.
The color of the selected item changes.
Press ENTER.
The GENERAL SETUP menu appears on the TV screen.
-- GENERAL PAGE -TV DISPLAY
NORMAL/PS
PIC MODE
NORMAL/LB
AMGLE MARK
WIDE
OSD LANG
CAPTIONS
You can select ON to see the captions in the contents of the
disc.
Setting options
ON, OFF
SCREEN SAVER
You can set the screen saver function to ON or OFF.
Setting options
ON, OFF
CAPTIONS
SCREEN SAVER
MAIN PAGE
To dismiss GENERAL SETUP display
Press SETUP or move the bar to MAIN PAGE and press
ENTER.
TV DISPLAY
Select the TV DISPLAY for your viewing preference.
Setting options
NORMAL/PS
NORMAL/LB
WIDE
- 4 x 3 Full TV screen
- 4 x 3 Movie screen
- 16 v 9 Wide screen TV
PIC MODE
This section refers to the settings which are already made
when you purchase the player. Read this section when you
want to change settings according to your preferences and
viewing environment.
1
2
3
Press SETUP.
Press
/
to select SPEAKER SETUP.
The color of the selected item changes.
Press ENTER.
The SPEAKER SETUP menu appears on the TV screen.
-- SPEAKER SETUP PAGE -DOWNMIX
LT/RT
CENTER
You can select whether the content on the disc is
processed by field (video source) or by frame (film source).
STEREO
REAR
VSS
Setting options
SUBWOOFER
5.1 CHANNEL
AUTO - Video & film contents
FILM
- Film contents
VIDEO - Video contents
SMART - Video & film, normal & active
SUPER SMART - Video & film, normal & active
Normally, SUPER SMART is selected.
ANGLE MARK
You can select to display multi-angle mark when contents on a
disc contains multi-angle video shots.
Setting options
ON, OFF
18
CENTER DELAY
REAR DELAY
TEST TONE
MAIN PAGE
To dismiss SPEAKER SETUP display
Press SETUP or move the bar to MAIN PAGE and press
ENTER.
DOWNMIX
You can select a downmix option when the player is connected to
an amplifier (sound system) using analog audio outputs.
Setting options
LT/RT
- Analog amplfier with Dolby Prologic decoder
connected to the 2 channel downmix outputs.
STEREO - Analog stereo amplifier connected to the
2 channel downmix outputs.
VSS
- Analog amplifier with virtual surround sound
5.1 Ch
- 5.1 channel analog amplifier connected to
connected to the 2 channel downmix outputs.
analog 5.1 channel outputs.
This section refers to the settings which are already made
when you purchase the player. Read this section when you
want to change settings according to your preferences and
viewing environment.
1
2
3
Press SETUP.
Press
/
to select AUDIO SETUP.
The color of the selected item changes.
Press ENTER.
The AUDIO SETUP menu appears on the TV screen.
SPEAKER SETUP
The following speaker setup can only be selected when
KARAOKE SETUP is turned off.
CENTER - Select ON if you are using the center
speaker.
REAR
- Select ON if you are using the rear L/R
speakers.
SUBWOOFER
- Select ON if you are using the
subwoofer speaker.
CENTER DELAY - Select delay time of the center
speaker.
REAR DELAY
- Select delay time of the rear L/R
speakers.
For 5.1 Channel Surround Sound, the best sound effect can
be achieved when the distance between the audience and
each speaker is the same. Set the CENTER DELAY and
REAR DELAY to achieve this equal distance.
TEST TONE
You can select ON to perform a speaker output test. The
test will be performed in the order of Front Left, Center,
Front Right, Rear Left, Rear Right, and Subwoofer.
-- AUDIO SETUP -SPDIF OUTPUT
OFF
PRO LOGIC
SPDIF/RAW
LPCM OUTPUT
SPDIF/PCM
DYNAMIC
MAIN PAGE
To dismiss AUDIO SETUP display
Press SETUP or move the bar to MAIN PAGE and press
ENTER.
SPDIF OUTPUT
You can select between digital outputs (COAXIAL and
OPTICAL) and analog outputs (DOWNMIX).
Setting options
OFF
- Analog audio output for downmix connections.
SPDIF/RAW - Digital audio output with Digital Dolby, DTS, etc.
SPDIF/PCM - Digital audio output with 2 channel stereo.
PRO LOGIC
You can select ON when listening to surround
multi-channel sound with the player’s analog audio output
connected to a surround decoder.
Setting options
OFF, ON, AUTO
LPCM OUTPUT
You can select the quality of the linear PCM digital sound
of the player. Normally, it should be set at 96KHz.
Setting options
LPCM 48K, LPCM 96K
19
DYNAMIC
You can select the level of dynamic range compression in
the audio output. Normally, it should be set at FULL.
Setting options
FULL, 7/8, 6/8, 5/8, 4/8, 3/8, 2/8, 1/8, OFF
This section refers to the settings in EQUALIZER which
are already made when you purchase the player. Read this
section when you want to change settings according to
your preferences and viewing environment.
1
This section refers to the settings which are already made
when you purchase the player. Read this section when you
want to change settings according to your preferences and
viewing environment.
1
2
3
Press SETUP.
Press
/
to select KARAOKE SETUP.
Press CLEAR/EQ.
The EQUALIZER menu appears with TYPE: STANDARD,
which you can changed by pressing ENTER. The selection
will rotate among STANDARD, CLASSIC, JAZZ, ROCK,
POPS, BALLAD, DANCE, and PERSONAL.
2
3
Press ENTER repeatly to select PERSONAL.
Press
/
to select a frequency block.
The color of the selected block will turn to yellow.
The color of the selected item changes.
Press ENTER.
The KARAOKE SETUP menu appears on the TV screen.
4
The volume level will go up or down accordingly.
-- KARAOKE PAGE -KARAOKE MODE
OFF
5
ON
6
Press SETUP or move the bar to MAIN PAGE and press
ENTER.
KARAOKE MODE
You can select ON for karaoke playback that would enable key
control and voice cancel features.
Setting options
OFF, ON
Selecting KARAOKE MODE ON automatically changes the
speaker output to DOWNMIX STEREO.
SPDIF OUTPUT should be OFF in AUDIO SETUP.
Pressing MIC ON on the remote control also changes
KARAOKE MODE.
20
Press CLEAR/EQ to change to SPECTRUM
display.
The SPECTRUM will display the volume levels of each
frequency block during playback.
MAIN PAGE
To dismiss KARAOKE SETUP display
Press / to select a volume level for the
frequency block.
7
Press CLEAR/EQ to turn off SPECTRUM display.
The SPECTRUM display will disappear but the
EQUALIZER is still in effect.
Press CLEAR/EQ to turn off EQUALIZER.
The EQUALIZER OFF message will appear. The
message will also clear in 2 seconds.
MPEG-4 files cannot be played back.
The format of the file is not asf.
Power
Power does not come on.
Power plug is not inserted securely. Plug in securely.
DiVX files are played back without sound.
This player can play back the MP3 sound for the audio
part of the DiVX files. Select the proper audio CODEC
when making DiVX files.
Operation
"REGION CODE ERROR!" is shown on the TV
screen.
Region code of the inserted disc does not match the
player. Check the region code of the disc printed on the
disc jacket. To change the region code of the player,
please visit www.cavsusa.com.
Operation is not possible.
Microcomputer malfunction due to lightning or static
electricity. Turn off the power and unplug the power
cord, then connect the power cord again.
Moisture condensation caused by a sudden change of
temperature or humidity. Turn off the power, then turn it
on a few hours later.
The disc does not allows the operation, or an
unplayable disc is inserted. Check and replace the disc.
Picture
Picture is noisy.
The player is connected to a VCR directly and the
copyguard function is activated. Connect the player so
that the picture signal flows directly to the TV.
With some discs, the picture may be blurred when PIC
MODE is set to FILM or AUTO. Set PIC MODE to
VIDEO or SUPER SMART.
Picture is distorted when using COMPONENT
VIDEO OUT or S-VIDEO output jack(s).
The Progressive scanning mode is activated. Change
the scanning mode to the Interlaced scanning mode by
selecting VIDEO OUTPUT in PREFERENCE SETUP
as SVIDEO or YCBCR.
Karaoke
No microphone signal can be found in the audio.
Connect the downmix L/R outputs of the player to your
sound system. Digital audio connection does not carry
microphone signals.
No graphics come out when playing Super CD+G.
When selecting a song after a rest, insert a song
number and wait for the display of title before pressing
ENTER or PLAY.
Key control does not work.
Press MIC ON to turn on the KARAOKE MODE.
MP3/JPEG/MPEG-4/DiVX
No sound and / or no picture comes out.
MP3/MPEG-4 disc is recorded with the "packet writing
(UDF format)." It cannot be played.
Check the files you want to play back.
Files (tracks) are not played in the recorded order.
Specifications and appearance are subject to change without
prior notice.
General
Readable discs
DVD VIDEO, DVD-R, DVD+R,
DVD-RW, SVCD, SUPER CD+G,
Video CD, CD+Graphics, Audio CD
(CD-DA), CD-R/RW, MP3, JPEG,
MPEG-4, DiVX
Video format
NTSC/PAL, 480i (Interlaced
scan)/480p (Progressive scan)
Other
Power requirements AC 110 - 240V 50/60Hz
Power consumption 10W (POWER ON),
1.1W (STANDBY mode)
2.1kg (4.7 lbs)
Mass
Dimensions
435mm 47mm 259mm
(W H D)
(17- / inch 1- / inch 10- / inch)
Video outputs
COMPONENT
(pin jacks)
VIDEO OUT
(pin jack)
S-VIDEO OUT
(S jack)
Y Output: 1.0 Vp-p (75 )
PB/PR Output: 0.7 Vp-p (75
1.0 Vp-p (75 )
)
Y Output: 1.0 Vp-p (75 )
C Output: 286 mVp-p (75 )
Horizontal resolution 500 lines or more
Audio outputs
ANALOG OUT
(pin jack)
DIGITAL OUT
(COAXIAL)
DIGITAL OUT
(OPTICAL)
2.0 Vrms (10 k
0.5 Vp-p (75
)
termination)
-21 dBm to -15 dBm (peak)
Audio characteristics
Frequency response CD (sampling frequency 44.1 kHz):
- 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
- 2 Hz to 22 kHz
(4 Hz to 20 kHz for DTS and Dolby
Digital bitstream signals)
DVD (sampling frequency 96 kHz):
- 2 Hz to 44 kHz
Dynamic range
16 bit: More than 98 dB
20 bit/24 bit: More than 100 dB
Wow and flutter
Unmeasurable (less than 0.002%)
Total harmonic distortion
less than 0.007%
This player plays the files in the alphabetic order. So,
the playback order can vary.
21
CAVS
LIMITED WARRANTY
CAVS DVD KARAOKE
CAVS USA Inc. warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the data of
original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
1 YR
LABOR
90 DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF
COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO :
If this products is found to be defective, CAVS will repair or replace defective parts at no charge to the original
owner. Such repair and replacement services shall be rendered by CAVS during normal business hours at CAVS
authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty
Period. All products and parts there of may be brought to a CAVS authorized service center on a carry-in basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE :
Return your product to a CAVS authorized service center with a copy of your bill of sale. For your nearest CAVS
authorized service center, please call : (562) 777-1846.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest CAVS Factory Service Center,
the name and location of which will be given to you by the phone.
If you have any questions concerning your CAVS Product, please contact our Technical Support Department.
WHAT IS NOT COVERED :
This limited warranty provided by CAVS does not cover :
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse,
faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility
authorized by CAVS to render such service, or if affixed any attachment not provided with the products, or if the
model number or serial number has been altered, tampered with, defaced or removed ;
2. Initial installation and removal for repair ;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning ;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage ;
5. Signal reception problems and failures due to line power surge ;
6. Video Pick-up, Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the data of
purchase ;
7. Accessories ;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase) ;
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
CAVS SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OD MERCHANT-ABILITY
AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
CAVS USA Inc.
10707 Fulton Wells Ave
Santa Fe Springs, CA 90670
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use :
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this
information for future reference.
Authorized Service Centers
HOW TO LOCATE YOUR CAVS SERVICE CENTER
CALL: 1 (562) 777-1846
http://www.cavsusa.com
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the instruction booklet
before operating the unit. In the event that repairs are necessary, please call 1 (562) 777-1846 for
your nearest authorized service or visit our website www.cavs.com.
Remember to retain your Bill of Sale for Warranty Service.
Do not service the product yourself
Caution
To prevent electrical shock, do not open the
cabinet. There are no user serviceable parts
inside. Please refer to qualified service
personnel for repairs.
Accessories
To purchase accessories for your CAVS
product, please call : 1 (562) 777-1850
or visit us at www.cavsusa.com
CAVS USA INC.
10707 Fulton Wells Ave
Santa Fe Springs, CA 90670
TEL: 1 (562) 777-1846
http://www.cavsusa.com
Download PDF