Sharp | CD-E500H | Specifications | Sharp CD-E500H Specifications

MINI KOMPONENTEN SYSTEM
MINI-CHAÎNE
SISTEMA MINI
MINI KOMPONENT SYSTEM
MINI SISTEMI
MINI SYSTEEM
MINI SISTEMA DE COMPONENTES
MINI COMPONENT SYSTEM
MODELL
MODÈLE
MODELO
MODELL
MODELLO
MODEL
MODELO
MODEL
Mini Komponenten System CD-E500H besteht aus CD-E500H (Hauptgerät) und
CP-E500H (Lautsprecher-System).
Mini-chaîne CD-E500H composée de CD-E500H (appareil principal) et de CPE500H (enceintes acoustiques).
Sistema mini CD-E500H que consta de CD-E500H (aparato principal) y CP-E500H
(sistema de altavoces).
CD-E500H mini komponent system bestående av CD-E500H (huvudenhet) och
CP-E500H (högtalarsystem).
Mini sistemi CD-E500H composto da CD-E500H (apparecchio principale) e CPE500H (sistema di diffusori).
CD-E500H mini systeem bestaande uit CD-E500H (hoofdtoestel) en CP-E500H
(luidsprekersysteem).
CD-E500H Mini Sistema de Componentes composto de CD-E500H (unidade principal) e CP-E500H (sistema de alto-falante).
CD-E500H Mini Component System consisting of CD-E500H (main unit) and CPE500H (speaker system).
CD-E500H
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
OPERATION MANUAL
DEUTSCH
FRANÇAIS
ESPAÑOL
Consulte las páginas i a vi y S-1 a S-32.
SVENSKA
ITALIANO
Hänvisa till sidorna i till vi och V-1 till V-32.
Leggere le pagine i a vi e I-1 a I-32.
NEDERLANDS
PORTUGUÊS
ENGLISH
CDE500HH_FRONT.pm
Downloaded From Disc-Player.com Sharp Manuals
1
Siehe Seiten i bis vi und D-1 bis D-32.
Se reporter aux pages i à vi et F-1 à F-32.
Raadpleeg de bladzijden i t/m vi en N-1 t/m N-32.
Favor consultar as páginas i a vi e P-1 a P-32.
Please refer to pages i to vi and E-1 to E-32.
03.1.10, 11:10 AM
CD-E500H
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
SPECIAL NOTES
● Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og
73/23/EEC med tillaeg nr. 93/68/EEC.
● Dette produktet oppfyller betingelsene i direktivene 89/336/
EEC og 73/23/EEC i endringen 93/68/EEC.
● Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC
vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
●
● Dieses Gerät entspricht den Anforderungen der EG-Richtlinien
89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG.
● Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/
68/CEE.
● Este aparato satisface las exigencias de las Directivas
89/336/CEE y 73/23/CEE, modificadas por medio de la 93/
68/CEE.
● Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/
EEC och 73/23/EEC så som kompletteras av 93/68/EEC.
● Quest’apparecchio è conforme ai requisiti delle direttive 89/
336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/
EEC.
● Dichiarazione di conformità
La società SHARP ELECTRONICS EUROPE GmbH dichiara
che il prodotto SHARP MINI SISTEMI CD-E500H è costruito
in conformità alle prescrizioni del D.M.n˚548 del 28/8/95,
pubblicato sulla G.U.n˚301 del 28/12/95 ed in particolare è
conforme a quanto indicato nell’art. 2, comma 1 dello stesso
decreto.
● Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/
EEG en 73/23/EEG, gewijzigd door 93/68/EEG.
● Este equipamento obedece às exigências das directivas 89/
336/CEE e 73/23/CEE, na sua versão corrigida pela directiva
93/68/CEE.
● Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist
die Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt
wird, kann das Gerät unter Verwendung der Timer-Betriebsart
oder Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
● Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie
ou la télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par
l’utilisateur. Personne non qualifiée n’enlèvera jamais les
couvercles. L’appareil contenant des organes portés à haute
tension, débrancher l’appareil avant toute réparation ou en
période de non-utilisation.
● This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/
EEC.
0203
i
CDE500HH_XP1.pm
Downloaded From Disc-Player.com Sharp Manuals
1
03.1.10, 11:11 AM
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas
que pueda reparar. No quite nunca las tapas a menos que se
esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
Desenchufe siempre la clavija de la red del tomacorriente
antes de realizar cualquier servicio de mantenimiento y
cuando no se use el aparato durante un largo período de
tiempo.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar.
Stickkontakten ska därför dras ut från nätuttaget före
reparationsarbeten och bör dras ut om apparaten inte ska
användas på mycket länge.
● Quando il tasto ON/STAND-BY si trova in posizione STANDBY, all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STANDBY, l’unità può essere accesa con il modo timer o con il
telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente.
Non togliere mai i coperchi, a meno di non essere qualificati
per farlo. All’interno dell’apparecchio ci sono tensioni
pericolose, per cui si deve sempre staccare la spina del cavo
d’alimentazione dalla presa di corrente prima di qualsiasi
intervento di manutenzione e quando non si usa l’apparecchio
per un lungo periodo di tempo.
● Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, kan het toestel ingeschakeld worden via de timerfunctie
of de afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren
onderdelen. Verwijder de behuizing nooit tenzij u deskundig
bent op dit gebied. In het toestel loopt een gevaarlijke spanning; haal de stekker altijd uit het stopcontact alvorens
onderhoud uit te voeren of wanneer het toestel voor langere
tijd niet gebruikt wordt.
CD-E500H
● Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação
através do modo de programação horária ou pelo controle
remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas
pelo usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens
perigosas. Remova sempre o cabo de alimentação da tomada
antes de efetuar qualquer conserto ou quando deixar o
aparelho muito tempo fora de uso.
● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode
or remote control.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long
period.
0203
ii
CDE500HH_XP2.pm
Downloaded From Disc-Player.com Sharp Manuals
2
03.1.10, 11:11 AM
CD-E500H
● Når ON/STAND-BY-knappen er sat i STAND-BY positionen,
er der stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position,
kan apparatet startes v.hj.a. timer-funksionen eller
fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af
brugeren selv. Fjern aldrig kabinettet med mindre De er
kvalificeret hertil. Apparatet indeholder farlig
strømspaending. Traek altid stikket ud af stikkontakten før
der foretages reparationer, eller hvis apparatet ikke er i
brug i laengere tid.
● Audio-visuelles Material kann Urheberrechte umfassen, die
ohne Genehmigung des Eigentümers dieser Urheberrechte
nicht aufgenommen werden dürfen. Siehe die entsprechenden
nationalen Gesetze.
● Le matériel audio-visuel peut comporter des oeuvres faisant
l’objet de droits d’auteur qui ne peuvent être enregistrées sans
l’autorisation du possesseur du droit d’auteur, veuillez vous
référer aux réglementations nationales en vigueur.
● El material audiovisual puede consistir en trabajos que tengan
derechos de autor y que no deben grabarse sin la autorización
del poseedor de dichos derechos de autor. Sírvase consultar
las leyes aplicables en su país.
● Audiovisuellt material kan innehålla upphovsrättsarbete som
inte skall mångfaldigas utan tillstånd av copyrightinnehavaren.
Se den tillämpliga lagen i ditt land.
DENNA APPARAT ÄR ANSLUTEN TILL 230 V
VÄXELSTRÖM NÄR STICKPROPPEN ÄR INSKJUTEN I
VÄGGUTTAGET. FÖR ATT FULLSTÄNDIGT KOPPLA IFRÅN
APPARATEN, V.G. DRAG UT STICKPROPPEN.
● Il materiale audio-visivo che fosse soggetto a copyright non
può essere registrato senza l’autorizzazione del possessore
del copyright. Si prega di attenersi alle leggi in vigore sul
territorio nazionale.
● Audio-visueel materiaal kan worden beschermd door
auteursrechten, in welk geval het niet mag worden opgenomen
zonder de toestemming van de auteursrechthouder. Zie voor
nadere informatie de betreffende wetten in het land van
gebruik.
● O material audiovisual pode consistir de trabalhos de direitos
autorias que não devem ser gravados sem autorização do
proprietário dos direitos. Favor consultar as leis vigentes em
seu país.
● Audio-visual material may consist of copyrighted works which
must not be recorded without the authority of the owner of the
copyright. Please refer to relevant law in your country.
0203
iii
CDE500HH_XP3.pm
Downloaded From Disc-Player.com Sharp Manuals
3
03.1.10, 11:11 AM
● Vorsicht:
Das Gerät weder Tropf- noch Spritzwasser aussetzen.
Ansonsten besteht die Gefahr eines Brandes oder
elektrischen Schlages. Es sollten keine mit Flüssigkeiten
gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt
werden.
● Attention:
Pour éviter un incendie ou une secousse électrique, mettre
l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser
sur l’appareil un récipient contenant du liquide.
● Advertencia:
Para evitar incendios y descargas eléctricas, no exponga
el aparato a goteo o salpicadura de líquidos. No deberán
ponerse encima del aparato objetos que estén llenos de
líquido, como por ejemplo un florero.
● Advarsel:
Til at forbygge ild og stød risiko, lad vaere med at undsaette
denne indretning for drypning eller overstaenkning. Der må
ikke anbringes nogen genstande fyldt med vand, som for
eksempel vaser, på dette apparat.
CD-E500H
● Advarsel:
For å unngå brann eller kortslutning, utsett ikke produktet for
vann eller fuktighet. Gjenstander som inneholder vaeske, feks.
en blomstervase, må ikke plasseres oppå apparatet.
● Varoitus:
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos laite on
kostunut, anna sen kuivua ennen kuin käytät sitä
verkkovirralla. Nestettä sisältäviä astioita kuten esim.
kukkamaljakoita ei saa asettaa laitteen päälle.
● Varning:
Utsätt inte enheten för dropp eller stänk för att förhindra
brand eller elektriska stötar. Inga vätskefyllda föremål
såsom vaser bör placeras på enheten.
● Attenzione:
Per prevenire incendi o scosse elettriche, non fare
gocciolare nessun liquido sull’apparecchio e non bagnarlo.
Non collocarvi sopra nessun oggetto riempito d’acqua,
come per esempio vasi.
● Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend water
om brand en elektrische schokken te voorkomen. Met
vloeistoffen gevulde voorwerpen, zoals vazen, mogen niet
op het toestel geplaatst worden.
● Cuidado:
Para evitar incêndio ou choque elétrico, não exponha este
aparelho a gotejamento ou salpicamento de água. Não
coloque objetos com água como, por exemplo, um vaso de
flores, em cima do aparelho.
● Warning:
To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids,
such as vases, should be placed on the apparatus.
Dieses Produkt ist ein Laserprodukt der Klasse 1.
Ce produit est classifié comme étant un LASER DE CLASSE 1.
Este producto está clasificado como un PRODUCTO LÁSER DE
CLASE 1.
Denna produkt klassificeras som KLASS 1 LASERPRODUKT.
Questo prodotto è classificato come CLASS 1 LASER PRODUCT.
Dit product is geclassificeerd als een KLASSE 1 LASER PRODUCT.
Este produto é classificado como PRODUTO LASER DE CLASSE 1.
This product is classified as a CLASS 1 LASER PRODUCT.
Dette produktet er klassifisert som et KLASSE 1 LASERPRODUKT.
Dette produkt er klassificeret som et KLASSE 1 LASERPRODUKT.
Tämä laite on luokiteltu LUOKAN 1 LASERLAITTEEKSI.
Denna produkt klassificeras som KLASS 1 LASERAPPARAT.
0203
CDE500HH_XP4.pm
Downloaded From Disc-Player.com Sharp Manuals
4
03.1.10, 11:12 AM
iv
CD-E500H
● VORSICHT
Verwendung von Regelungen oder Einstellungen bzw.
Durchführung von anderen Verfahren als die hierin
angegebenen kann zum Aussetzen gefährlicher Strahlung
führen.
Da der in diesem Compact Disc Player verwendete Laserstrahl
für die Augen schädlich ist, ist das Gehäuse unter keinen
Umständen zu zerlegen.
Wenden Sie sich für Wartungsarbeiten nur an berechtigten
Fachhändler.
● ATTENTION
Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement. En cas de non-respect,
on s’exposera à une radiation dangereuse.
Éviter absolument de démonter l’appareil, qui utilise un rayon
laser nuisible aux yeux. Pour toute réparation, s’adresser à
une personne qualifiée.
● PRECAUCIÓN
El uso de los controles, ajustes o ejecución de procedimientos
distintos de los especificados podría causar la exposición a
radiación peligrosa.
No intente desmontar la caja ya que el haz de láser usado en
este reproductor de discos compactos es perjudicial para los
ojos. Para el servicio de reparación, consulte a una persona
cualificada.
● LET OP
Gebruik van regelaars, het maken van instellingen, gebruik
of handelingen anders dan in deze gebruiksaanwijzing
vermeld, kan gevaarlijke straling blootleggen.
De laserstraal in deze CD-speler kan de ogen beschadigen,
Probeer derhalve de ombouw niet te verwijderen. Laat
reparaties alleen over aan erkend onderhoudspersoneel.
● CUIDADO
O uso de controles, ajustes ou a execução de procedimentos
além daqueles especificados aqui pode resultar em perigosa
exposição à radiação.
Como os raios laser usados neste player de CD são perigosos
para os olhos, não tente desmontar o aparelho. Solicite o
conserto somente para pessoas especializadas.
● CAUTION
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
● OBSERVERA
Användning av reglage eller justeringar eller handhavande
på annat sätt än som anges kan leda till farlig bestrålning.
Försök inte ta isär höljet eftersom CD-spelarens laserstråle
är skadlig för ögonen. Överlåt service endast till kvalificerad
personal.
● ATTENZIONE
L’uso dei comandi e l’effettuazione di regolazioni e
procedimenti diversi da quelli specificati nel manuale possono
provocare una pericolosa esposizione alle radiazioni.
Poiché il raggio laser usato in questo giradischi può
danneggiare gli occhi, non smontare l’apparecchio. Per le
riparazioni rivolgersi a personale specializzato.
0203
v
CDE500HH_XP5.pm
Downloaded From Disc-Player.com Sharp Manuals
5
03.1.10, 11:12 AM
Eigenschaften der Laserdiode
Material: GaAIAs
Wellenlänge: 780 nm
Emissionsdauer: kontinuierlich
Laser-Ausgang: max. 0,6 mW
CD-E500H
Caractéristiques de la diode laser
Matière: GaAIAs
Longueur d’onde: 780 nm
Durée d’émission: ininterrompue
Puissance de sortie laser maximale: 0,6 mW
Características del diodo láser
Material: GaAIAs
Longitud de onda: 780 nm
Duración de emisión : continua
Salida de láser: máx. 0,6 mW
Laserdiodens egenskaper
Material: GaAIAs
Våglängd: 780 nm
Utstrålningsvaraktighet: kontinuerlig
Lasereffekt: max. 0,6 mW
Proprietà del diodo laser
Materiale: GaAIAs
Lunghezza d’onda: 780 nm
Durata di emissione: continua
Uscita massima del laser: 0,6 mW
ADVERSEL-SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
SE IKKE IND I STRÅLEN-HELLER IKKE MED OPTISKE INSTRUMENTER.
VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ
OPTISEN LAITTEEN LÄPI.
VARNING-SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ
STRÅLEN GENOM OPTISKT INSTRUMENT.
Laser diode specificaties
Materiaal: GaAIAs
Golflengte: 780 nm
Stralingsduur: doorlopend
Laseruitgang: max. 0,6 mW
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN
I DENNA BRUKSANVISNING SPECIFICERAS. KAN
ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR
LASERKLASS 1.
Propriedades do diodo laser
Material: GaAlAs
Comprimento de onda: 780 nm
Duração da emissão: contínua
Saída de laser: máx. 0,6 mW
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
0203
0203
vi
CDE500HH_XP6.pm
Downloaded From Disc-Player.com Sharp Manuals
6
03.1.10, 11:12 AM
ENGLISH
CD-E500H
ENGLISH
Introduction
Contents
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully. It
will guide you in operating your SHARP product.
! General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5
! Preparation for Use
Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
Please confirm that the following accessories are included.
General Information
Page
! Basic Operation
Sound control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
! CD Playback
Remote control 1
"AA" size battery (UM/SUM-3,
R6, HP-7 or similar) 2
Listening to a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
Advanced CD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 14
! Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16
! Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) . . . . . . . . . . 17
! Tape Recording
AM loop aerial 1
FM aerial 1
Recording to a cassette tape . . . . . . . . . . . . . . . . . . . . . . . 18, 19
! Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . . . . . . . . 20 - 24
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . 25 - 27
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
AC power lead 1
Note:
Only the above accessories are included.
! References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 30
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
E-1
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
Precautions
CD-E500H
" Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
10 cm (4")
" Use the unit on a firm, level surface free from vibration.
" Keep the unit away from direct sunlight, strong magnetic fields,
excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generate electrical
noise.
" Do not place anything on top of the unit.
" Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
" If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
" In case of an electrical storm, unplug the unit for safety.
" Hold the AC power plug by the head when removing it from the
wall socket, as pulling the lead can damage internal wires.
" Do not remove the outer cover, as this may result in electric
shock. Refer internal service to your local SHARP service
facility.
" The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
" No naked flame sources, such as lighted candles, should be
placed on the apparatus.
" Attention should be drawn to the environmental aspects of battery disposal.
" The apparatus is designed for use in moderate climate.
" This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
ENGLISH
! Volume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
! Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collection and player.
" Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
" Keep your discs away from direct sunlight, heat, and excessive
moisture.
" Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
General Information
! General
YES
Correct
8
E-2
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
Controls and indicators
General Information
ENGLISH
! Front panel
1
2
3
4
5
6
7
8
9
12
13
14
15
16
10
11
17
18
19
22
23
20
21
24
25
Reference page
1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . 10, 14, 16
4. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 25
6. Timer/Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27
7. Tuning and Time Up Button . . . . . . . . . . . . . . . . . . . . . 10, 15
8. Tuning and Time Down Button . . . . . . . . . . . . . . . . . . . 10, 15
9. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
10. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 18, 19
11. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 17
12. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . . 9
13. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . . . . 8, 9
14. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . 9
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 11
16. Disc Skip Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
17. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 17
18. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
20. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 17
21. CD Track Down or Fast Reverse, Tape 2 Rewind, Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16, 17
22. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
23. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
24. CD Play or Repeat, Tape Play Button . . . . . . . . . . . 11, 13, 17
25. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner
Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16, 17
E-3
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
1 2
3 4 5 6
7 8 9 10
11
12
13 14
15 16
1
4
5
2
! Rear panel
Reference page
1. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . 28
2. Cooling Fan
3. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
4. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
6
3
1
1. Disc Number Indicators
2. CD Play Indicator
3. Tape Play Indicator
4. RDS Indicator
5. Traffic Announcement Indicator
6. Traffic Programme Indicator
7. FM Stereo Mode Indicator
8. FM Stereo Receiving Indicator
9. Memory Indicator
10. Extra Bass Indicator
11. Timer Recording Indicator
12. Timer Play Indicator
13. CD Pause Indicator
14. CD Repeat Play Indicator
15. Tape 2 Record Indicator
16. Sleep Indicator
General Information
ENGLISH
! Display
Note:
This product is equipped with a cooling fan inside, which begins to
run at a specified volume level for better heat radiation.
2
2
! Speaker system
3
4
1. Tweeter
2. Bass Reflex Ducts
3. Woofer
4. Speaker Wire
8
E-4
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
Controls and indicators (continued)
ENGLISH
! Remote control
1
General Information
2
3
14
15
4
16
5
17
18
19
20
6
7
8
9
10
21
22
23
11
12
13
24
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Programme Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Tuning and Time Down Button . . . . . . . . . . . . . . . . . . . . . 10, 15
8. CD Track Down or Fast Reverse, Tape 2 Rewind, Tuner Preset
Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16, 17
9. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 17
10. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . . . 9
11. RDS Programme Type/Traffic Information Search Button 24
12. RDS ASPM (Auto Station Programme Memory) Button . . 22
13. RDS Display Mode Select Button . . . . . . . . . . . . . . . . . . . . 20
14. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . 11, 14, 18
15. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
16. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
17. CD Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
18. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16, 17
19. Tuning and Time Up Button . . . . . . . . . . . . . . . . . . . . . . . 10, 15
20. CD Play or Repeat, Tape Play Button . . . . . . . . . . . . 11, 13, 17
21. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . . 18, 19
22. CD Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
23. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
24. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 9
Buttons with " " mark in the illustration or highlighted in bold on the
right can be operated on the remote control only.
E-5
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
Remote control
! Battery installation
1
2
3
Remove the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Replace the cover.
CD-E500H
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
ENGLISH
Check the remote control after checking all the connections (see
pages 7 - 8).
Point the remote control directly at the remote sensor on the unit.
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Remote sensor
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunction.
Preparation for Use
! Test of the remote control
0.2 m - 6 m
(8" - 20')
8
E-6
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
System connections
ENGLISH
! Aerial connection
AM loop aerial
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
FM aerial
Right speaker
Left speaker
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Preparation for Use
Note:
Placing the aerial on the stereo system or near the AC power lead
may cause noise pickup. Place the aerial away from the stereo system for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
Wall socket
(AC 230 V, 50 Hz)
External FM aerial
Red
Black
E-7
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
! Speaker connection
! Demonstration mode
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Incorrect
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
Note:
The speaker grilles are not removable.
! Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
! To turn the power on
Preparation for Use
Caution:
" Use speakers with an impedance of 8 ohms
or more, as lower impedance speakers can
damage the unit.
" Do not mistake the right and the left channels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
" Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
" Do not stand or sit on the speakers. You may
be injured.
ENGLISH
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
8
E-8
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
Sound control
ENGLISH
! Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
X-BASS indicator
Basic Operation
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeatedly until the desired sound mode appears.
FLAT
The sound is not modified.
ROCK
Bass and treble are emphasised.
CLASSIC Treble is cut a little.
! Volume control
POPS
Bass and treble are slightly emphasised.
Press the VOLUME (+ or -) button to increase or decrease the volume.
VOCAL
Vocals (midrange tones) are emphasised.
JAZZ
Treble is slightly emphasised.
0 1
2 ..... 29 30
MAXIMUM
E-9
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
Setting the clock
CD-E500H
ENGLISH
3
Within 30 seconds, press the TUNING/TIME ( or ) button
to adjust the hour and then press the MEMORY/SET button.
" Press the TUNING/TIME ( or ) button once to advance
the time by 1 hour. Hold it down to advance continuously.
" When the 12-hour display is selected, "AM" will change automatically to "PM".
Within 30 seconds, press the TUNING/TIME ( or ) button to
adjust the minutes and then press the MEMORY/SET button.
In this example, the clock is set for the 24-hour (0:00) display.
1
2
Press the CLOCK button and within 8 seconds, press the
MEMORY/SET button.
Within 30 seconds, press the TUNING/TIME ( or ) button
to select 24-hour or 12-hour display and then press the
MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
" Press the TUNING/TIME ( or ) button once to advance
the time by 1 minute. Hold it down to advance continuously.
" The hour will not advance even if minutes advance from "59"
to "00".
To confirm the time display:
Press the CLOCK button.
The time display will appear for
about 8 seconds.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flashing in step 1, step 2 (for selecting the 24-hour or 12-hour display)
will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 30 for details.]
2 Perform "Setting the clock" from step 1.
Basic Operation
4
8
E-10
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E1.fm
CD-E500H
ENGLISH
Listening to a CD (CDs)
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the CD in the open position.
! CDs can be placed on any open position on the disc tray.
! Be sure to place 8 cm (3") CDs in the middle of the disc positions.
CD Playback
12 cm (5")
5
Press the OPEN/CLOSE
Total number of tracks on
the CD whose number is
flashing
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the OPEN/CLOSE
button to open the disc tray.
8 cm (3")
button to close the disc tray.
Total playing time of the CD
whose number is flashing
6
To select the CD you want to listen to first, press one of the
1 - 3 buttons on the remote control.
7
Press the
/
button to start playback.
! Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will
automatically start playback.
! When the last track on the third disc has finished playing, the
CD player will automatically stop.
! When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will begin to play.
E-11
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
" To locate the beginning of a track
button.
To stop playback:
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Caution:
! Do not place two CDs in one disc tray.
! Do not play discs with special shapes (heart- or octagonshaped). It may cause malfunctions.
! Do not push the disc tray whilst it is moving.
! Do not turn the disc tray by hand. This may cause malfunctions.
! If the power fails whilst the tray is open, wait until the power is
restored.
! If the disc tray is stopped with force, the unit will not function. If
this occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
! If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
! If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
Notes:
! You can locate the beginning of a track on a single disc only.
or
button
! You can skip to any track by pressing the
repeatedly until the desired track number appears.
" To locate the desired portion
For audible fast forward:
Press and hold down the
For audible fast reverse:
Press and hold down the
button during playback.
button during playback.
Notes:
or
button is
! Normal playback will resume when the
released.
! You can locate the desired portion on a single disc only.
! When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
CD Playback
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the
ENGLISH
8
E-12
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
ENGLISH
Advanced CD playback
" Starting playback with a desired track
" Repeat play
You can play a disc starting with the desired track.
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the / button twice.
1
2
Whilst in the stop mode, press one of the 1 - 3 buttons
on the remote control or DISC SKIP button to select the desired disc.
Press the
or
button to select the desired
track.
Selected disc number
CD Playback
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section on page 14
and then press the / button twice.
3
Selected track number
Press the / button to start playback.
Playback of the selected track is started. When the end of the
last track is reached, the next disc will automatically be started.
Notes:
! When the DISC SKIP button is pressed during playback, the next
disc will begin automatically.
1 3 buttons on the remote control is
! When one of the
pressed during playback, the selected disc will begin automatically.
! You can select a track number which is larger than the total track
number of the disc (maximum 99). In this case, the last track on
the disc will be played back.
E-13
To repeat random play:
Press the / button during random play.
To cancel repeat play:
Press the / button again. " " will go out.
" Random play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random play.
To cancel random play:
Press the button.
Notes:
button during random play, you can move
! If you press the
to the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous track. The beginning of the track being played will be located.
! In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the button. Otherwise, the disc(s) will play continuously.
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
ENGLISH
You can choose up to 32 selections for playback in the order you
like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
2
Press the
or
button to select the desired track.
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
Selected disc number
Selected track number
Playback order
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the
/
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
! Opening the disc tray automatically cancels the programmed
sequence.
! Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed selections will not be cleared.
! During programme operation, random play is not possible.
CD Playback
" Programmed play
button to start playback.
8
E-14
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
Listening to the radio
ENGLISH
3
Press the TUNING/TIME ( or ) button to tune in to the desired station.
Manual tuning:
Press the TUNING/TIME button as many times as required to
tune in to the desired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Radio
Notes:
! This can be operated by pressing the TUN. ( or ) button
on the remote control.
! When radio interference occurs, auto scan tuning may stop
automatically at that point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the TUNING/TIME button again.
! When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator
will light. Finally, the station name will appear.
! Full auto tuning can be achieved for RDS stations "ASPM",
see page 22.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
! " " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
" Tuning
1
2
Press the ON/STAND-BY button to turn the power on.
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
FM stereo receiving indicator
! If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer.
E-15
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
" Memorising a station
" To recall a memorised station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Press the PRESET ( or
select the desired station.
Perform steps 1 - 3 in "Tuning" on page 15.
Press the MEMORY/SET button to enter the preset tuning
saving mode.
" To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
2
3
4
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
Within 30 seconds, press the MEMORY/SET button to store
that station in memory.
) button for less than 0.5 seconds to
Press and hold down the PRESET ( or ) button.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
When the desired station is located, release the PREEST ( or
) button.
" To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the TUNER (BAND) button and the DISC
SKIP button, press the ON/STAND-BY button until "TUNER CL"
appears.
Radio
1
2
ENGLISH
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is disconnected.
8
E-16
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
Listening to a cassette tape (TAPE 1 or TAPE 2)
Before playback:
! For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not recommended.)
! Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
! Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
Tape Playback
ENGLISH
3
Load a cassette into the TAPE 1
compartment or TAPE 2 compartment with the side to be played
facing toward you.
4
Press the TAPE (1
want to listen to.
5
Press the
TAPE 1
/
TAPE 2
2) button to select the cassette you
button to start playback.
To stop playback:
Press the button.
Fast forward/rewind: (TAPE 2 only)
1 Press the button, then press the TAPE (1 2) button to select
TAPE 2.
2 To advance the tape, press the
button. To rewind it, press
the
button.
Playback is possible in the TAPE 1 compartment as well as the
TAPE 2 compartment.
1
2
Press the ON/STAND-BY button to turn the power on.
Open the cassette door by pushing the area marked "PUSH
EJECT ".
Caution:
! To remove the cassette, press the button, and then open the
compartment.
! Before changing from one tape operation to another, press the
button.
! If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
! Even if the button on the remote control is pressed during tape
playback, the unit will not enter the pause mode.
E-17
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
Recording to a cassette tape
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
! To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
Side A
Tab for
side B
Tab for
side A
CD-E500H
" Recording from a CD (CDs)
ENGLISH
You can record 3 CDs continuously.
1
2
Press the ON/STAND-BY button to turn the power on.
3
4
Press the CD button and load the desired disc.
5
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
6
Press the / button to start recording.
! CD playback will start approximately 5 seconds after the
tape starts.
! Recording is started from the selected CD. When the playback of the last disc is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press one of the 1 - 3 buttons on the remote control to
select the disc to be recorded first.
To perform programmed recording:
1 Programme discs and tracks. (See page 14.)
) button.
2 ! Press the REC PAUSE (TAPE-2
3 Press the / button.
Tape Recording
Before recording:
! When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
! The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
! Recording can be operated in the TAPE 2 compartment only.
The TAPE 1 compartment is for playback only.
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
Recording is paused, but CD playback will continue.
To resume recording, press the / button.
To stop recording:
Press the button.
The CD and tape will stop.
Note:
Whilst recording, OPEN/CLOSE button is deactivated. It is recommended to perform CD recording after closing the disc tray.
8
E-18
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
ENGLISH
Recording to a cassette tape (continued)
" Recording from the radio
Tape Recording
1
2
Tune in to the desired station. (See page 15.)
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
4
Press the
/
" Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
2
3
Press the TAPE (1
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the
To stop recording:
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Load a prerecorded cassette
into the TAPE 1 cassette compartment. Insert a blank tape
into the TAPE 2 cassette compartment.
It is recommended that the recording tape is the same length as
the master tape.
button to start recording.
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the / button.
Press the ON/STAND-BY button to turn the power on.
/
2) button until "TAPE 1" appears on
button to start dubbing.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
" Erasing recorded tapes
1
2
3
4
Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
Press the REC PAUSE (TAPE-2
) button.
Press the / button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
E-19
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sports or music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
CD-E500H
ENGLISH
" Information provided by RDS
Each time the DISPLAY button is pressed, the display will
switch as follows:
Station name (PS)
Programme type (PTY)
When you are tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will change in
the following order:
NO PS
NO PTY
FM 98.80 MHz
Advanced Features
Frequency
You can control the RDS by using the remote control only.
8
E-20
03/1/9
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E2.fm
CD-E500H
Using the Radio Data System (RDS) (continued)
ENGLISH
Descriptions of the PTY (Programme Type) codes, TP (Traffic
Programme) and TA (Traffic Announcement).
You can search for and receive the following PTY, TP and TA signals.
Advanced Features
NEWS
Short accounts of facts, events and publicly expressed
views, reportage and actuality.
AFFAIRS Topical programme expanding or enlarging upon the
news, generally in different presentation style or concept, including debate, or analysis.
INFO
Programmes whose purpose is to impart advice in the
widest sense.
SPORT
Programme concerned with any aspect of sport.
Programme intended primarily to educate, of which the
EDUCATE
formal element is fundamental.
DRAMA All radio plays and serials.
CULProgrammes concerned with any aspect of national or
TURE
regional culture, including language, theatre, etc.
SCIProgrammes about the natural sciences and technoloENCE
gy.
VARIED Used for mainly speech-based programmes usually of
light-entertainment nature, not covered by other categories. Examples include: quizzes, panel games, personality interviews.
POP M
Commercial music, which would generally be considered to be of current popular appeal, often featuring in
current or recent record sales charts.
ROCK M Contemporary modern music, usually written and performed by young musicians.
EASY M Current contemporary music considered to be "easylistening", as opposed to Pop, Rock or Classical, or one
of the specialised music styles, Jazz, Folk or Country.
Music in this category is often but not always, vocal,
and usually of short duration.
LIGHT M
CLASSICS
OTHER
M
WEATHER
FINANCE
CHILDREN
Classical music for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works.
Performances of major orchestral works, symphonies,
chamber music, etc., and including Grand Opera.
Musical styles not fitting into any of the other categories. Particularly used for specialist music of which
Rhythm & Blues and Reggae are examples.
Weather reports and forecasts and meteorological information.
Stock Market reports, commerce, trading, etc.
For programmes targeted at a young audience, primarily for entertainment and interest, rather than where
the objective is to educate.
SOCIAL Programmes about people and things that influence
them individually or in groups. Includes: sociology, history, geography, psychology and society.
RELIAny aspect of beliefs and faiths, involving a God or
GION
Gods, the nature of existence and ethics.
PHONE
Involving members of the public expressing their views
IN
either by phone or at a public forum.
TRAVEL Features and programmes concerned with travel to
near and far destinations, package tours and travel
ideas and opportunities. Not for use for announcements about problems, delays, or roadworks affecting
immediate travel where TP/TA should be used.
LEISURE Programmes concerned with recreational activities in
which the listener might participate. Examples include,
Gardening, Fishing, Antique collecting, Cooking, Food
& Wine, etc.
JAZZ
Polyphonic, syncopated music characterised by improvisation.
E-21
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
NATION
M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
NONE
TP
TA
Songs which originate from, or continue the musical
tradition of the American Southern States. Characterised by a straightforward melody and narrative story
line.
Current Popular Music of the Nation or Region in that
country's language, as opposed to International 'Pop'
which is usually US or UK inspired and in English.
Music from the so-called "golden age" of popular music.
Music which has its roots in the musical culture of a particular nation, usually played on acoustic instruments.
The narrative or story may be based on historical
events or people.
Programme concerned with factual matters, presented
in an investigative style.
Broadcast when testing emergency broadcast equipment or receivers.
Emergency announcement made under exceptional
circumstances to give warning of events causing danger of a general nature.
No programme type (receive only).
Broadcasts which carry traffic announcements.
Traffic announcements are being broadcast.
! Using the Auto Station Programme Memory
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in memory, the number of
new stations you can store will be less.
1
Press the TUNER (BAND) button to select
the FM band.
2
Press and hold down the ASPM button for
at least 3 seconds.
1
After "ASPM" has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
2
When an RDS station is found, "RDS" will appear first, and
then "MEMORY" and the preset channel number will flash
for 2 seconds. Finally the station will be stored in memory.
3
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then "END" will appear for
4 seconds.
Advanced Features
COUNTRY
ENGLISH
8
E-22
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
Using the Radio Data System (RDS) (continued)
ENGLISH
Advanced Features
To stop the ASPM operation before it is complete:
Press the ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
" If the same station is broadcasting on different frequencies, the
strongest frequency will be stored in memory.
" Any station which has the same frequency as one stored in memory will not be stored.
" If 40 stations have already been stored in memory, the scan will
be aborted. If you want to redo the ASPM operation, erase the
preset memory.
" If no stations have been stored in memory, "END" will appear for
about 4 seconds.
" If the RDS signals are very weak, station names may not be
stored in memory.
To erase one of the contents of preset memory:
1 Press the PRESET ( or ) button to select the preset channel
number you want to erase.
2 Press the MEMORY button.
3 Within 5 seconds, press the CLEAR button.
To erase all of the contents of preset memory:
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the TUNER (BAND) button and the XBASS/DEMO button, press the ON/STAND-BY button until "TUNER CL" appears.
" After performing this operation, all of the preset memory information will be erased.
To store a station name again if the wrong name was stored in
memory:
It may be impossible to store station names in memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
1 Press the PRESET ( or ) button to check whether the names
are correct.
2 If you find a wrong name during receiving the station, wait until the
correct name will be displayed. And then press the MEMORY button.
3 Within 5 seconds, press the MEMORY button whilst the preset
channel number is flashing.
" The new station name has been stored in memory correctly.
Notes:
" The same station name can be stored in different channels.
" In a certain area or during certain time periods, the station names
may temporarily be different.
! Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
" "PS", "NO PS" and a station name appear alternately, and the
unit does not operate properly.
" If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work properly.
" When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
" "NO PS" or "NO PTY" will flash for about 5 seconds, and then the
frequency will be displayed.
E-23
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
ENGLISH
To specify programmed types and select stations (PTY
search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 21 - 22) from the stations in memory.
1
2
Press the TUNER (BAND) button to select the FM.
Press the PTY TI. button.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP" will appear.
(This does not mean that you can listen to the traffic information at
that time.)
When the traffic information is broadcast, "TA" will appear.
"PTY TI" will flash for about 4 seconds.
3
Within 4 seconds, press the PRESET (
lect the programme type.
or
) button to se-
Each time the button is pressed, the programme type will appear. If the button is held down for more than 0.5 seconds, the
programme type will appear continuously.
4
Notes:
" If the display has stopped flashing, start again from step 2. If the
unit finds a desired programme type, the corresponding channel
number will flash for about 4 seconds, and then the station name
will flash for 7 seconds, which will remain lit.
" If you want to listen to the same programme type of another station, press the PTY TI. button whilst the channel number or station name is flashing. The unit will look for the next station.
" If no station can be found, "NOTFOUND" will appear for 4 seconds.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the PRESET ( or ) button to select a desired station.
3 The station name will be displayed for 4 seconds. Then the display will change.
Advanced Features
! To recall stations in memory
Whilst the selected programme type is flashing (within 4
seconds), press the PTY TI. button again.
After the selected programme type has been lit for 2 seconds,
"SEARCH" will appear, and the search operation will start.
8
E-24
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
ENGLISH
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
! Timer playback or timer recording
Before setting timer:
1
2
Advanced Features
Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.
Press the CLOCK button to check that the clock is set to the
correct time. (Refer to page 10.)
For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE
2 cassette compartment.
1
2
Press the ON/STAND-BY button to turn the power on.
3
Adjust the volume using the VOLUME buttons.
Press the CD, TUNER (BAND) or TAPE (1 2) button to select the desired function.
To select the timer playback source: CD, TUNER (BAND) or
TAPE.
To select the timer recording source: TUNER (BAND).
When you select the TUNER (BAND), tune into the desired
station.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer
playback or timer recording and within 8 seconds, press
the MEMORY/SET button.
Display the white " " for timer playback and the red " " for
timer recording.
White
E-25
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
Red
CD-E500H
ENGLISH
Within 30 seconds, press the TUNING/TIME ( or ) button
to specify the hour to start, then press the MEMORY/SET
button.
The illustrations show the timer playback setting.
6
Within 30 seconds, press the TUNING/TIME ( or ) button
to specify the minute to start, then press the MEMORY/SET
button.
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Note:
When performing timer playback or recording using another unit
connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in
step 2.
At this time, only this unit will be turned on or enter the power standby mode automatically. It will enter the power stand-by mode 1 hour
after the playback or recording starts. However, another unit will not
be turned on or off.
Advanced Features
5
" Settings are displayed in order and the unit will enter the timer stand-by mode.
" Timer set indicator will light up.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
7
When the preset time is reached, playback or recording will
start.
The volume will increase gradually until it reaches the volume
you were listening to before your system entered the timer
stand-by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback or recording starts.
8
E-26
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
ENGLISH
Timer and sleep operation (continued)
! Sleep operation
Advanced Features
1
2
! To use timer and sleep operation together
Play back the desired sound source.
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed and then within 8 seconds, press the MEMORY/
SET button.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or ) button.
(Maximum: 3 hours - Minimum: 5 minutes)
3:00
(cancel)
3
4
2:00
0:05
1:30
0:10
1:00
0:15
0:30
Within 30 seconds, press the MEMORY/SET button.
Your system will enter the power stand-by mode automatically after the preset time has elapsed.
The volume will be turned down 30 seconds before the sleep
operation finishes.
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
1
2
Set the sleep time (see left, steps 1 - 3).
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 25 - 26).
Sleep timer setting
Timer playback setting
5 minute - 3 hours
Sleep operation will
Timer playback
automatically stop.
start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
E-27
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
Enhancing your system
CD-E500H
The connection lead is not included. Purchase a commercially available lead as shown below.
VCR, DVD, etc.
To the line
output sockets
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
Press the
5
Play the VCR, DVD, etc.
/
) button.
button.
Red
Red White
RCA lead
(not supplied)
! Headphones
" Before plugging in or unplugging the headphones, reduce the
volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME buttons.
! Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
Advanced Features
White
ENGLISH
! To record on a tape
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
Note:
To prevent noise interference, place this unit away from a television.
8
E-28
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
ENGLISH
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
References
! General
Symptom
Possible cause
" The clock is not set to the " Did a power failure occur? Reset
correct time.
the clock. (Refer to page 10.)
" When a button is pressed, " Set this unit to the power standthe unit does not respond.
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 30.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires disconnected?
! Tuner
Symptom
" The radio makes unusual
noises continuously.
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
! Cassette deck
Symptom
" Cannot record.
Possible cause
" Is the erase-prevention tab removed?
" Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality.
record on a metal or CrO tape.)
" Cannot erase completely.
" Sound skipping.
" Is there slack in the tape?
! CD player
Symptom
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the standle or is not performed
dards?
properly.
" Is the disc distorted or
scratched?
" Playback sounds are
" Is the unit located near excessive
skipped, or stopped in the
vibrations?
middle of a track.
" Is the disc very dirty?
" Has condensation formed inside
the unit?
Possible cause
" Is the unit placed near the TV or
computer?
" Cannot hear treble.
" Sound fluctuation.
" Cannot remove the tape.
" Is the tape stretched?
" Are the capstans, pinch rollers,
or heads dirty?
" If a power failure occurs during
playback, the heads remain engaged with the tape. Do not open
the compartment with great
force.
E-29
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
Symptom
" The remote control does
not operate.
! Clearing all the memory (reset)
"
"
"
"
"
Possible cause
Is the AC power lead of the unit
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Does the remote control sensor
receive strong light?
! If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
1
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
Whilst pressing down the CLOCK button and the DISC SKIP
button, press the ON/STAND-BY button until "CLEAR" appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
! Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
References
! Remote control
ENGLISH
! Before transporting the unit
1
2
3
4
5
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the OPEN/CLOSE button to open the disc tray.
Remove all CDs inserted in the unit.
Press the OPEN/CLOSE button to close the disc tray.
Make sure that "NO DISC" is displayed.
Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the wall socket.
8
E-30
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
ENGLISH
Maintenance
Specifications
! Cleaning the tape-handling parts
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
TAPE 1
References
TAPE 2
D
! General
A
B
C
Power source
Power consumption
E
B
C
Dimensions
Weight
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
" After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
( * )This power consumption value is obtained when the demonstration mode is cancelled in the power stand-by mode. Refer to
page 8 to cancel the demonstration mode.
! Amplifier
Output power
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.
AC 230 V, 50 Hz
Power on: 95 W
Power stand-by: 0.6 W (*)
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 342 mm (13-1/2")
6.6 kg (14.5 lbs.)
Output terminals
Input terminals
PMPO: ??? W
MPO: ??? W (?? W + ?? W) (DIN 45 324)
RMS: ??? W (?? W + ?? W) (DIN 45 324)
RMS: ??? W (?? W + ?? W) (DIN 45 500)
Speakers: 8 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
E-31
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
CD-E500H
! CD player
Type
Signal readout
D/A converter
Frequency response
Dynamic range
! Speaker
3-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
Type
Maximum input
power
Rated input power
Impedance
Dimensions
! Tuner
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Weight
2-way type speaker system
5 cm (2") tweeter
13 cm (5") woofer
100 W
50 W
8 ohms
Width: 200 mm (7-7/8")
Height: 305 mm (12")
Depth: 180 mm (7-1/16")
3.2 kg (7.0 lbs.)/each
References
Frequency range
ENGLISH
! Cassette deck
Frequency response
Signal/noise ratio
Wow and flutter
125 - 8,000 Hz (normal tape)
50 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0.35 % (DIN 45 511)
8
E-32
03/1/10
Downloaded From Disc-Player.com Sharp Manuals
CD-E500H(H)E3.fm
SHARP CORPORATION
9906
TINSE0130SJZZ
03A N HK 1
CDE500HH_BACK.pm
Downloaded From Disc-Player.com Sharp Manuals
1
03.1.10, 11:10 AM
Download PDF