Ljósmælir OPM5 series

Ljósmælir OPM5 series
OPM5 Optical Power Meter
The OPM5 from AFL Telecommunications is a full-featured, handheld optical power meter
designed for measuring optical power in Premises, Telco, or Broadband networks and for
performing insertion loss measurements on multimode or single-mode fiber optic links.
The OPM5 features automatic wavelength identification and switching (Wave ID)
when used with Noyes OLS series light sources, multiple test Tone detection for fiber
identification, and stores optical references for each calibrated wavelength and up to 500
records per wavelength of power or insertion loss measurements. Using the supplied
Windows® compatible software and USB connection, test records are transferred to a
PC for analysis, printing, and storage. A large dual-wavelength LCD display with backlight
shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths [nm],
tone signal [Hz], wavelength ID, and estimated remaining battery life.
•• Handheld, rugged, lightweight
•• Multimode or single-mode applications
•• Wave ID (auto identification & switching)
•• Multiple-wavelength testing
•• 270Hz, 330Hz, 1kHz, 2kHz Tone detection
•• Large LCD with backlight
•• Power measurements in dBm or μW;
insertion loss in dB
•• Reference power level storage
•• Up to 500 records per wavelength storage
•• USB port for download of stored records
•• Windows® compatible software to view,
print, and archive stored records
•• Automatic power-off function
•• Battery gauge
•• Long battery life with 2 x AA alkaline,
optional AC adapter
•• N.I.S.T traceable
•• Premises (Ge), Telco (InGaAs), and
Broadband (+26 dBm) models
•• Passive Optical Networks (PON) testing
The OPM5 optical input port accepts a variety of Noyes thread-on style adapter caps
(ordered separately) to meet a wide range of testing requirements. The OPM5 offers a
five-minute auto-off feature and long battery life from common AA alkaline batteries with
external AC adapter available as an option.
The OPM5 is fully N.I.S.T. traceable.
Calibrated wavelengths
850, 1300,
1310,1550 nm
850, 1300,
1310, 1550, 1625 nm
850, 980, 1310, 1490,
1550, 1625 nm
Detector type
Germanium (Ge)
Filtered InGaAs
Measurement range
+6 to -60 dBm
+10 to -75 dBm
+26 to -50 dBm
Tone detect range
+6 to -50 dBm
+10 to -50 dBm
+6 to -45 dBm for 850nm +10 to -45 dBm for 850nm
+6 to -30 dBm
+6 to -25 dBm for 850nm
Wavelength ID range
+6 to -50 dBm
+10 to -50 dBm
+6 to -45 dBm for 850nm +10 to -45 dBm for 850nm
+6 to -30 dBm
+6 to -25 dBm for 850nm
± 0.25 dB
0.01 dB
Measurement units
dB, dBm, μW
2 x AA batteries, optional AC adapter
Battery life
300 hours
Operating temperature
-10 to 50°C, 90% RH (non-condensing)
Storage temperature
-30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
* Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
All specifications at 25°C
Ordering Information
All OPM5 models
OPM5 optical power meter, 2 x AA batteries, protective rubber boot, USB cable, Windows® compatible software and user’s guide, OPM5 user’s guide, and carry case.
Test & Inspection
© 2004-2007, AFL Telecommunications, all rights reserved. OPM5-30-2000 Revision C, 12.20.07
Specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF