Системы управления светом ADB (Английская версия)

Системы управления светом ADB (Английская версия)
Your Partner for Light
Catalogue produits
Productcatalogus
Product Catalogue
ProduktKatalog
www.adblighting.com
Edition May 2012
Lighting Technologies
Summary
About ADB
2
Controlling
6
8
10
12
14
16
18
FREEDOM
LIBERTY
DOMINO
MIKADO & SWING
Lighting Networks
House Lighting Control
Dimming
EURODIM Twin Tech
EURORACK Wall Mount Dimmer Racks
Intelligent Dimmer Packs for Professional Applications
Intelligent Dimmer Packs for General Purpose Applications
Flight Case Dimmer for Touring
Lighting - Theatre Spotlights
WARP
LED Spotlights
EUROPE
"A" Range
EUROSPOT
Lighting - Multi-Purpose Luminaires
ALC4-2 LED Fixtures
ACP Cyclorama Lights
Fill Lights LF/HF 1000
Lighting - Television Luminaires
ARRI Spotlights
SOFTLUX Cool Lights
Rigging Systems & Studio Design
20
22
26
28
30
32
34
36
42
44
52
54
56
58
60
62
64
66
72
Hoists
74
76
Accessories
78
1
Lighting Technologies
About ADB
ADB - Your Partner for Light
A wealth of experience and innovation in stage and studio lighting
1920 ADB originally founded in by Mr Adrien de Backer – whose initials provided the company name - began its
life as a manufacturer of electrical equipment for laboratories, mainly rheostats.
1925 ADB applied the rheostats and later on the RHEOTOR® variable transformers to the dimming of light in theatres,
music halls and cinemas. The company was, notably, responsible for producing the first light dimmer for the
Malines theatre in Belgium. This equipment served for over forty years.
1938 The first spotlights were introduced and soon afterward lighting control became electromechanical and
partially motorized with relay control.
1950 The start of a long period, of innovations, with for ex. dimmers based on thyratrons, on magnetic amplifiers
and, since 1965, on thyristors. And also, the first memory control desks based on punched cards, ferrites,
magnetic tape, floppy disc, and finally in 1985 on microprocessors.
1987 ADB was acquired by the SIEMENS Group. At that time ADB was already strongly established as a worldwide
broad line manufacturer of professional stage and studio lighting equipment.
2002 Following a management buy-out, the ADB Group was restructured, the production streamlined and upgraded
in order to make of ADB a lean and agile operation able to face new challenges.
2004 Launch of WARP, a revolutionary zoom profile spotlight with ring control and motorization of all functions.
2009 The new standard in dimming is introduced: EURODIM Twin Tech – and DimSwitch modules allowing advanced
solid state dimming and switching with a single type of module.
2010 ALC4 – A modular, multipurpose high power LED Luminaire is introduced – initially featured as key fixture
lighting the 50 m cyclorama of the Jean Michel Jarre World Tour 2010.
Today ADB operates through 3 subsidiaries in France, Belgium and Hong Kong, and a network of professional
distributors in over 50 countries.
Production and logistics are centralized in the French facility of Saint-Quentin, whereas R&D, Product
Engineering, Marketing and International Sales are located at the Belgian headquarters.
ADB Belgium
Factory & Group Logistics Centre, Saint-Quentin, France
ADB France, Paris
ADB Hong Kong
2
Lighting Technologies
Company Profile
ADB-Partner of Theatre and Television Professionals
ADB’s core competence is in high performance, high quality products and services for professional applications in
stage and studio lighting.
ADB is mastering software and hardware
development, as well as product engineering
and production of all key components of
a stage or studio lighting system, i.e.
luminaires, dimmers, controls desks,
networks and motorized suspensions. For
the end user, this is the guarantee of system
wide compatibility of all components, easier
maintenance, plus the comfort of dealing
with only one responsible partner.
ADB is particularly at home with ready-torun projects. For each individual case, in
close collaboration with the customer and
his architects, set designers or consultants,
ADB proposes the solution best suited to
the specific needs of the user.
ADB Capabilities
Quality
Products
Luminaires
Dimmers
Control Desks
Rigging
Lighting Vans
Accessories
Worldwide
Service
Training
Seminars
Repairs
Maintenance
Stocks
Consulting
Turnkey
Projects
Concept
Design
Engineering
Manufacture
Installation
Commissioning
From system design through
equipment specifications, installation and
commissioning, the ADB Project Team
provides customized solutions for any kind
of stage or studio lighting system, even
complete lighting vans for use wherever
power supply is not available. ADB Project
Engineers ensure efficient coordination
with Consultants and Architects as well
as the specialists in infrastructures, air
conditioning, stage machinery, sound,
electricity, e.a. so as to guarantee to the
end user timely project completion and
total system performance.
These capabilities, coupled with a long experience, have made of ADB a partner of choice for lighting professionals around the world.
ADB is proud to count among its customers, not only the most prestigious theatres, but also many state and private television
networks in over 50 countries.
3
Lighting Technologies
A wealth of experience in stage and studio lighting, a comprehensive range of high quality products and a strong
project management capability are some of the key strengths which have made of ADB the preferred partner of so
many Theatre and Television Lighting Professionals around the world.
Metropolitan Opera New York
VRT - TV STUDIO
Brussels Belgium
The totally silent WARP Motorized
profile spotlights are the choice of
discerning lighting professionals in
many prestigious venues:
Professional Broadcasting Studios
request 100% reliability and functionality.
Major broadcasters relying on ADB:
National BTV-Minsk, Belarus,
TF1 Paris,
Channel 11 Bangkok, Thailand,
National Television HRT, Croatia,
N
BBC Studios, United Kingdom
B
Monnaie Opera Brussels, Belgium,
Shen Zen Concert Hall, China,
Bayerische Staatsoper, Munich Germany,
Glyndebourne Festival, United Kingdom
TV Lighting & Energy Van
Algerian TV
A speciality of our project department
is to design and supply custom
solutions, such as this lighting van.
Should you have any specific lighting
requirement, do not hesitate to
contact our project deparment.
4
Lighting Technologies
Projects & Achievements
BASTILLE Opera
Paris - France
DE DOELEN
Rotterdam - The Netherlands
Replacement of dimmers originally
installed for the theatre’s opening in
1989 by newest EURODIM Twin Tech
technology.
ADB supplied a broad range of
luminaires including WARP/Motorized,
as well as EURODIM sine wave
dimmers, important in acoustically
demanding concert halls.
Many famous opera houses rely on
the quality and endurance of ADB
digital dimmers, such as:
Teatro alla Scala, Milano,
Bolshoi, Moscow,
Opera Garnier, Paris,
Grand Théâtre de Genève, Switzerland
Other fine venues:
Concert Haus, Vienna, Austria
Palau de les Arts Reina, Sofia, Spain
Casa di Musica, Porto, Portugal
Oriental Arts Centre, Shanghai, China
Tonhalle, Düsseldorf, Germany
Gewandhaus, Leipzig, Germany
National Centre for the
Performing Arts
Beijing - China
Strong
throughout
Asia,
ADB
supplied the complete lighting control
system, dimmers and networking for
the Opera as well as luminaires for the
entire multi-venue complex.
Other references in Asia:
Shanghai Grand Theatre, China
Kimhae Cultural Centre,
Seoul, Art Centre,
Soengnam, Culture Hall, Korea
NHK, Osaka,
New National Theatre, Tokyo, Japan
ITV Television, Taiwan
Municipal Theatre
Luxemburg
A turnkey lighting project, engineered
by ADB project specialists, featuring
customized solutions for meeting
specific requirements.
Similar cases:
Casino Oostende, Belgium,
Macau Cultural Centre, China,
C-Mine Genk, Belgium
An impressive reference list is available upon request.
5
Lighting Technologies
Control Desks & Networks
In 1945, ADB lighting control was electromechanical and partially
motorized with relay control. In 1962, first ADB “punched card” memory
control desks were state-of-the-art. Between 1968 and 1975, punched
cards were replaced successively by ferrites, magnetic tapes and floppy
disc systems. Then in 1985, ADB introduced S28, the first control system
based on microprocessors.
Today, ADB has completely renewed its range of lighting control boards to
meet the various requirements of stage and studio lighting professionals.
Based on HATHOR, a new software, LIBERTY and FREEDOM are the
latest additions to the range. Key features include a graphical user
interface with support for multi-touch screens, advanced luminaire and
fixture tracking facilities, state-of-the-art lighting cue transfer control, as
well as flexible user configuration and customization.
A selected range of networking devices and Ethernet system solutions
allows the build-up of a comprehensive lighting control system.
6
Lighting Technologies
CONTROLLING
Code
Reference
Description
FREEDOM
LIBERTY
Top range professional lighting consoles for control of generic and moving lights. Through optional software
extensions FREEDOM and LIBERTY feature true multi-user operation in networked environments.
DOMINO 24/48/48XT/96XT
4 very competitive consoles for small to medium size venues, designed
for maximum flexibility and ease of use.
MIKADO
The user friendly console for manual and memory control.
SWING
Manual Control Desk, 6 or 12 channels with DMX output.
7
Lighting Technologies
The state of the art lighting and show control tool when more multi-parameter instruments are needed to be controlled and fast
access is required. Together with the LIBERTY console this range is ideal for all venues seeking a fully integrated solution to control
conventional and moving lights as well as LED sources and other modern equipment in a portable package.
FREEDOM features four additional rotary wheels with pushbutton function and a super smooth large size trackball for precision
positioning control. FREEDOM allows users to control quantities of multiple LED fittings, intelligent lights or media servers as well
as the standard generic dimming systems.
Four physical DMX outputs and one physical DMX512 input on board with 5 pole standard XLR connection sockets can be used
in case no ETHERNET network is available.
Highly intuitive thanks to the graphical user interface and powered by the HATHOR software this desk meets the sophisticated
needs of all lighting professional. The lighting control desk philosophy has been specifically designed for theatre stage lighting
without any compromise.
FREEDOM is available in five basic configurations controlling channel numbering from 120 to 2048 multi-parameter lighting
instruments and can address up to 32 universes via suitable networks. Synchronised backup is optionally available. FREEDOM
consoles perform as standalone or as a client consoles in an extended networked system. Networked FREEDOM consoles will
support multi-user / multi-operator setups with optional software packages and hence works perfectly together with other control
desks powered by HATHOR software.
Playbacks
Keypad
•
•
•
•
•
•
•
•
•
•
1 Grandmaster with Blackout key.
24 physicals Submasters with assign key and Flash key.
Modes: Solo / Inhibit / Focusing / Rubberband &
Auto-execute look.
Loading possibilities: Channels, Groups, Presets,
Looks.
Chasers, Attributes and Palettes.
1 Master Playback 100 mm (Sequential Theatrical
Crossfade).
GO / GO BACK / PAUSE / Jump / SEQ- & SEQ + keys.
1 Intensity / Speed control wheel.
•
•
•
•
•
Status information LCD.
Channel selection: +, -, Thru, +%, -%, At Level, All
and Invert commands.
RECORD/UPDATE for Presets, Looks, Groups, and
Palettes with filtered options.
Direct Frame (Gel String Colour) key.
Direct Numeric entry for SEQUENCE Times and
Special.
Times.
Undo key.
Integrated 10.1" LED Touchscreen
Moving Light Controls
•
•
4 rotary Wheels with Pushbutton function.
1 Trackball 50 mm.
5 Dedicated keys for very quick related content display:
•
SEQUENCE
•
SUBMASTERS
•
CHANNELS
•
MOVING LIGHTS CONTROL
•
UNLIMITED USER SCREEN LAYOUTS
8
Lighting Technologies
Memory Control Desks
Code
Description
Reference
FREEDOM - 120 channels
FREEDOM - 240 channels
FREEDOM - 360 channels
FREEDOM - 512 channels
FREEDOM - 1024 channels
FREEDOM - 2048 channels
FREEDOM/120
FREEDOM/240
FREEDOM/360
FREEDOM/512
FREEDOM/1024
FREEDOM/2048
Basic desk featuring:
• 4 DMX universes on XLR5
• 1 DMX input on XLR5
• 32 DMX addressable universes through Ethernet
(depends on deployed protocol)
• Universal power supply 90-264 V, 50-60 Hz
• 1 SVGA and 1DVI (or HDMI) Video Screen output
• 8 external lines for remote triggering
• 1 Audio input
• 1 Ethernet, on RJ45
• 1 keyboard port
• 2 XLR3 for 12V "gooseneck" desk lamp
Supplied with:
• Alphanumerical keyboard (QWERTY, AZERTY or QWERTZ)
and optical Mouse
• Power Supply cable
• Dust cover
• Quick Start User Manual and System restore Media
Hardware Options and Accessories
Additional block of 120 channels
(retrofit for upgrade of 120 and 240 Channel Desks to next group)
Additional block of 512 channels
(retrofit for 512 up to 1024 instruments)
DVD Player / Writer with USB connection
MIDI – USB adaptor
22" LCD/TFT monitor
22" LCD/TFT monitor with Multi Touch Integrated
XLR3 "gooseneck" desk lamp
Flight case for FREEDOM consoles
Flight case for 22” Touchscreen Monitor
Backup for FREEDOM 120
Backup for FREEDOM 240
Backup for FREEDOM 360
Backup for FREEDOM 512
Backup for FREEDOM 1024
Backup for FREEDOM 2048
Wireless Remote Control unit
120CH/UP/HAT
512CH/UP/HAT
DVD
MIDI/USB
LCD22
LCD22/HAT
WORKLITE/XLR3
FLY/F
FLY/M/L
RPU/120
RPU/240
RPU/360
RPU/512
RPU/1024
RPU/2048
WIFI/FULL/HAT
Dimensions
9
Lighting Technologies
LIBERTY is the spot-on solution for space-challenging environments and all venues seeking a fully integrated solution in a highly
compact and portable package with the capacity of much larger and more expensive lighting consoles.
The control desk software (which is common with the FREEDOM console) itself has been developed with the requirements of modern
lighting design in mind. The lighting control desk philosophy has been specifically designed for theatre stage lighting without any
compromise. As an operator it is easy to advance from a LIBERTY console to other members of the HATHOR software powered
lighting control desk family thanks to the highly intuitive operating interface.
The heart of the unit is driven by a dual core processor with multiple graphical screens and running under the recent embedded
version of Windows OS. This design offers unrivalled performance and reliability, as well as the flexibility to incorporate the software
drivers for the latest peripheral devices. The lighting console exchanges among other protocols with standard ASCII show files. The
operator may freely configure the screen layout and tailor the user interface to their personal needs and preferences.
LIBERTY is available in five basic configurations controlling channel numbering from 120 to 1024 multi-parameter lighting
instruments and can address up to 16 universes via suitable networks. Synchronised passive backup feature is integrated in the
system. LIBERTY consoles perform as standalone or as a backup/client desk in an extended network system. Networked LIBERTY
and FREEDOM consoles will support multi-user / multi-operator setups with optional software packages.
Playbacks
Keypad
•
•
•
•
•
•
•
•
•
•
1 Grandmaster with Blackout key.
24 physicals Submasters with assign key and Flash key.
Modes: Solo / Inhibit / Focusing / Rubberband &
Auto-execute look.
Loading possibilities: Channels, Groups, Presets,
Looks.
Chasers, Attributes and Palettes.
1 Master Playback 100 mm (Sequential Theatrical
Crossfade).
GO / GO BACK / PAUSE / Jump / SEQ- & SEQ + keys.
1 Intensity / Speed control wheel.
•
•
•
•
•
Status information LCD.
Channel selection: +, -, Thru, +%, -%, At Level, All
and Invert commands.
RECORD/UPDATE for Presets, Looks, Groups, and
Palettes with filtered options.
Direct Frame (Gel String Colour) key.
Direct Numeric entry for SEQUENCE Times and
Special.
Times.
Undo key.
Integrated 10.1" LED Touchscreen
Moving Light Controls
•
4 virtual touchscreen sliders located on the central
10.1” LED Touchscreen.
5 Dedicated keys for very quick related content display:
•
SEQUENCE
•
SUBMASTERS
•
CHANNELS
•
MOVING LIGHTS CONTROL
•
UNLIMITED USER SCREEN LAYOUTS
10
Lighting Technologies
Memory Control Desks
Code
Description
Reference
LIBERTY - 120 channels
LIBERTY - 240 channels
LIBERTY - 360 channels
LIBERTY - 512 channels
LIBERTY - 1024 channels
LIBERTY/120
LIBERTY/240
LIBERTY/360
LIBERTY/512
LIBERTY/1024
Basic desk featuring:
• 2 DMX universes on XLR5
• 16 DMX addressable universes through Ethernet
(depends on deployed protocol)
• Universal power supply 90-264 V, 50-60 Hz
• 1 SVGA and 1DVI (or HDMI) Video Screen output
• 8 external lines for remote triggering
• 1 Audio input
• 1 Ethernet, on RJ45
• 1 keyboard port
• 1 XLR3 for 12V "gooseneck" desk lamp
Supplied with:
• Alphanumerical keyboard (QWERTY, AZERTY or QWERTZ)
and optical Mouse
• Power Supply cable
• Dust cover
• Quick Start User Manual and System restore Media
Hardware Options and Accessories
Additional block of 120 channels
(retrofit for upgrade of 120 and 240 Channel Desks to next group)
Additional block of 512 channels
(retrofit for 512 up to 1024 instruments)
DVD Player / Writer with USB connection
MIDI – USB adaptor
22" LCD/TFT monitor
22" LCD/TFT monitor with Multi Touch Integrated
XLR3 "gooseneck" desk lamp
Flight case for LIBERTY consoles
Flight case for 22” Touchscreen Monitor
Backup for LIBERTY 120
Backup for LIBERTY 240
Backup for LIBERTY 360
Backup for LIBERTY 512
Backup for LIBERTY 1024
Wireless Remote Control unit
120CH/UP/HAT
512CH/UP/HAT
DVD
MIDI/USB
LCD22
LCD22/HAT
WORKLITE/XLR3
FLY/L
FLY/M/L
RPU/120
RPU/240
RPU/360
RPU/512
RPU/1024
WIFI/FULL/HAT
Dimensions
11
Lighting Technologies
DOMINO/XT 48/96
Main Features:
•
48 faders in 2-preset mode or 96 faders in extended mode on DOMINO/XT/96 - 24/48 faders on DOMINO/XT/48.
•
48 faders configurable as channels, submasters or playbacks on DOMINO/XT/96 - 24 faders on DOMINO/XT/48.
•
18 dedicated faders configurable in 9 pages as submasters or playbacks.
•
4 preset masters-A preset, B preset, C preset and grab.
•
Theatrical dipless crossfade with 2 general masters, stage and preset, and dedicated buttons.
•
Up to 594 memories on DOMINO/XT/96 - 378 on DOMINO/XT/48.
•
Individual In (Up) and Out (Down) fade times.
•
Up to 66 playbacks/chasers on DOMINO/XT/96 can be played simultaneously - 43 on DOMINO/XT/48.
•
Fully proportional softpatch to 1024 dimmers.
•
2-preset, extended & memory modes, each fader with flash button.
•
LED display showing status information via scrolling messages.
•
Up to 250 steps of a chaser can be recorded as channels, or Memories/Snapshots.
•
1 SVGA output for displaying texts, memories, patch and help menus in multiple languages.
•
1 USB connector for show recording.
•
MIDI IN/OUT connector (optional for DOMINO/XT/48 & 96).
•
Moving light control module (optional on DOMINO/XT/48 and DOMINO/XT/96) and featuring:
Powerful effects engine and automatic fanning of fixtures.
Extensive fixture library with Web updates.
Comprehensive controls for filters, palettes, presets, cloning, groups,storing, lock home, etc.
6 touch pad displayers (virtual wheels) for parameter control.
DOMINO/XT/48/M: 36 groups, 96 presets, 96 pallets and 378 effects.
DOMINO/XT/96/M: 36 groups, 192 presets, 192 pallets and 594 effects.
•
2 DMX512/1990 output on XLR-5F connector.
•
90-260 V, 47/63Hz power supply with automatic detection.
DOMINO 24/48
Main Features:
•
24 faders in 2-preset mode or 48 faders in extended mode on DOMINO 48 - 12/24 faders on DOMINO 24.
•
24 faders configurable as channels, submasters or playbacks on DOMINO 48 - 12 faders on DOMINO 24.
•
3 preset masters: A preset, B preset and grab.
•
Theatrical dipless crossfade with 2 general masters, stage and preset, and dedicated buttons.
•
Up to 216 memories on DOMINO 48 - 108 on DOMINO 24.
•
Individual In (Up) and Out (Down) fade times.
•
Up to 25 playbacks/chasers on DOMINO 48 can be played simultaneously - 13 on DOMINO 24.
•
Fully proportional softpatch to 512 dimmers.
•
2-preset, extended & memory modes, each fader with flash button.
•
LED display showing status information via scrolling messages.
•
Up to 250 steps of a chaser can be recorded as channels, or Memories/Snapshots.
•
On DOMINO 24 U & 48 U as standard, and on DOMINO 24 & 48 as retrofit option:
1 SVGA output for displaying memories, patch, texts and help menus in multiple languages
1 USB connector for show recording
MIDI IN/OUT connector.
•
1 DMX512/1990 output on XLR-5F connector.
•
90-260 V, 47/63Hz power supply with automatic detection.
12
Lighting Technologies
Manual and Memory Control Desks
Code
Description
5023.10.230
DOMINO/XT/48
Reference
- 48 channels - 1024 DMX addresses
- 1 SVGA output
5023.10.235
DOMINO/XT/48/M - 48 channels - 1024 DMX addresses
5023.10.240
DOMINO/XT/96
5023.10.245
DOMINO/XT/96/M - 96 channels - 1024 DMX addresses
DOMINO/XT/48
- 1 SVGA output - Motion control module DOMINO/XT/48 M
- 96 channels - 1024 DMX addresses
- 1 SVGA output
DOMINO/XT/96
- 1 SVGA output - Motion control module DOMINO/XT/96 M
Supplied with: power supply cable with CEE 7-7 plug
5023.20.053
2810.00.080
1105.53.475
1001.30.062
1001.30.063
5023.20.140
5023.20.150
Option
• Moving light control module
(for retrofit on DOMINO/XT/48 and DOMINO/XT/96),
featuring:
- Powerful effects engine and automatic fanning of fixtures.
- Extensive fixture library with Web updates.
- Comprehensive controls for filters, palettes, presets, cloning,
groups, storing, lock home, etc.
- 6 touch pad displayers (virtual wheels) for parameter control.
- Module added on DOMINO/XT/96: 36 groups, 96 presets,
96 pallets and 378 effects.
- Module added on DOMINO/XT/96: 36 groups, 192 presets,
192 pallets and 594 effects.
Accessories
USB memory stick
XLR3 "gooseneck" desk lamp
Dust cover for DOMINO/XT/48
Dust cover for DOMINO/XT/96
Flight case for DOMINO/XT/48
Flight case for DOMINO/XT/96
MC/DOM/XT
FLASHMEM
WORKLITE/XL3
DC/DOM/XT/48
DC/DOM/XT/96
FLY/DOM/XT/48
FLY/DOM/XT/96
Dimensions
DOMINO 48 XT: 734 x 535 x 144 mm - Net weight: 15.5 kg
DOMINO 96 XT: 974 x 535 x 144 mm - Net weight: 26.0 kg
5023.10.210
5023.10.215
5023.10.220
5023.10.225
DOMINO 24 - 24 channels - 512 DMX addresses
DOMINO 24 U - 24 channels - 512 DMX addresses + USB option
DOMINO 48 - 48 channels - 512 DMX addresses
DOMINO 48 U - 48 channels - 512 DMX addresses + USB option
DOMINO/24
DOMINO/24 U
DOMINO/48
DOMINO/48 U
Supplied with: power supply cable with CEE 7-7 plug
5023.20.034
2810.00.080
1105.53.475
1001.30.060
1001.30.061
5023.20.120
5023.20.130
Option
USB option for retrofitting on DOMINO 24 & 48 and providing:
- 1 SVGA output for displaying memories, patch, texts and
help menus in multiple languages
- 1 USB connector for show recording
- MIDI IN/OUT connector.
Accessories
USB memory stick
XLR3 "gooseneck" desk lamp
Dust coverfor DOMINO 24
Dust cover for DOMINO 48
Flight case for DOMINO 24
Flight case for DOMINO 48
USB/DOM
FLASHMEM
WORKLITE/XL3
DC/DOM24
DC/DOM48
FLY/DOM24
FLY/DOM48
Dimensions
DOMINO 24: 464 x 367 x 115 mm - Net weight: 7.5 kg
DOMINO 48: 684 x 367 x 115 mm - Net weight: 10.5 kg
13
Lighting Technologies
MIKADO 12/24
Main Features:
•
12 faders in 2-preset mode or 24 faders in extended mode, each with flash
button and LED indicator.
•
3 pages of memories with 12 submaster faders per page = 36
memories.
•
A submaster can be either a memory or a chaser and up to 13 memories/
chasers can run simultaneously.
•
3 preset masters – A preset, B preset and grab.
•
Add/Solo button with flash level master.
•
Edit and preview of stored memories with channel level indicators.
•
Manual and automatic dipless crossfade.
•
Speed control of chasers.
•
Chaser effects including Start/Stop/Step, random, bounce, single shot,
forward/reverse direction, delete/add steps.
•
Audio input with bass effect for chasers and audio level adjustment.
•
External line input on 1/4” mono jack for remote control of chasers.
•
1DMX512/1990 output on XLR-5F connector.
•
Internal power supply unit, input 230 V +/- 10% - 50/60 Hz.
SWING
SWING 12
Main Features:
•
12-channel manual desk.
•
2 presets of 12 channels.
•
General master.
•
Manual crossfade.
•
DMX512/1990 output on XLR-5F connector.
SWING 6
Main Features:
•
6-channel manual desk.
•
DMX512/1990 output on XLR-5F connector.
14
Lighting Technologies
Manual and Memory Control Desks
Code
Description
Reference
5023.10.200
MIKADO
MIKADO
Supplied with:
power supply cable with CEE 7-7 plug
Accessories
5023.20.033
5023.20.032
19" rack mount brackets
KIT/FIX/MIK/19
External memory module, allowing recording of up to 4 show data MEM/EXT/MIK
Dimensions
MIKADO: 438 x 346 x 104 mm - Net weight: 5 kg
1105.30.461
SWING 12
SWING 12
Supplied with:
1 external power supply unit with 1.5 m cable.
9 VDC supply unit, input 230 V +/- 10% - 50/60 Hz.
1105.30.451
SWING 6
SWING 6
Supplied with:
1 external power supply unit with 1.5 m cable.
9 VDC supply unit, input 230 V +/- 10% - 50/60 Hz.
Dimensions
SWING 6: 175 x 140 x 48 mm - Net weight: 1.2 kg
SWING 12: 280 x 247 x 48 mm - Net weight: 2.2 kg
15
Lighting Technologies
FREEDOM and LIBERTY control desks are ideal to work in a network configuration and may perform as stand alone or as backup/client desks in an extended network system. A synchronised passive back-up feature is always integrated as standard in the
system. Beyond that, networked LIBERTY and FREEDOM consoles support multi-user / multi-operator setups with either one
of two optional software packages. One is designed for Networks with two desks (DUO) and another (MULTI) for networks with
multiple desks. The lighting show information is completely updated instantaneously on line and different lighting desks operators
can edit, run and manipulate a show all at the same time. This is a very powerful feature when large lighting installations have to
be programmed swiftly and one operator would not be able to control all devices at the same time.
Above is an example of three desks working in Multi-User mode with some peripheral equipment connected to the system. Below
are only some typical network products listed in this catalogue. Should you be interested in other configurations please contact
our ADB Project Specialists who will advise on the most suitable solution for your own application.
SPLITTER
DMX512-A 2.10 Hub
Distribute up to 2 DMX lines to 10 outputs. Bidirectional fully
isolated RDM / DMX splitter, booster. 2 Input zones and 10
selectable outputs. All in 1 unit 19" rack space.
NODE
Ethernet-DMX2 (NODE / 19)
2 port DMX <-> Artnet node in a 19", 1 unit metal enclosure.
Ideal for touring.
DMX Input and/or output.
Merging / backup / patching / routing.
Accessories and Software
When installing network systems, great care must be taken to the quality of cabling and connectors. If you are in doubt please contact
ADB projects department for more information on the design of your project. We also recommend planning on-site commissioning
by factory trained service technician.
Our partner LUMINEX offers, via its website, free of charge software tools to monitor and control lighting networks, and we
recommend downloading from www.luminex.be
16
Lighting Technologies
NETWORKING
Code
Description
Reference
Networking options for FREEDOM / LIBERTY
desks
Networking System Tracking Backup & active client for 2 Desks (DUO) NET/DUO/HAT
Networking Software Full Synchro for multiple Desks (MULTI)
NET/MULTI/HAT
If advanced Networking options are required one of the networking
software licences must be procured per installation. For further information
please contact your nearest ADB distribution partner or ADB directly.
DMX512 Splitter - DMX512-A 2.10 Hub
DMX/SPLIT
Connections:
• 2 DMX512-A in/outputs on 5 pin male XLR, with termination
(RDM compliant)
• 10 DMX512-A in/outputs on 5 pin female XLR, with termination
(RDM compliant)
• Fixed mains lead (90-260 VAC, 47-63 Hz) 2 DMX512-A
in/outputs on 5 pin male XLR on the back panel
(identical to the 2 zone inputs on the front end)
Standard Ethernet Switch
16 ports Ethernet Switch
24 ports Ethernet Switch
NET/SWITCH/16P
NET/SWITCH/24P
Main features:
• Intelligent Fast Ethernet Switch
• 19", 1 U metal housing
• 10/100 Mbit
• Internal power supply
Network Node - 19” Ethernet Converter Node
NODE/19
Main features :
• Ethernet/Art-Net node for converting Art-Net into DMX512-A,
or DMX512-A into ArtNet.
• 2 outlets, compatible with DMX512-A, can be used as input or
output
Supplied with: power cable with plug
17
Lighting Technologies
HLC-1
HLC-1, House Lighting Control, is a simple, programmable, plug-and-play House Lighting Control System.
Installation is quick and easy, limited to connecting the control unit to Ethernet and CANBUS, and the outputs to the dimmers via
DMX, Ethernet or ADB’s SLIO module. The system is then ready to control houselights, worklights, rehearsal and service lights.
Total flexibility is provided by the possibility to customize the parameters, for ex. changing lighting configuration, colours texts,…
and storing data with a password.
HLC-1 is a significant achievement in terms of a very flexible and powerful control system at an attractive price, with the additional
benefits of user friendly installation, handling and programming.
House Lighting
• Control of up to 12 zones, with SUM, ON-switch and 8
memories.
Settings by the User
• Simple software updates and backups by the user.
• User passwords.
Worklights
Worklight Masters
• Control of up to 24 zones.
• 4 presets for fit-up,
• "Blue Light" up to 16 zones.
rehearsal, show and
• Switched sockets.
night.
Settings by the User
• Layout of pushbuttons and faders.
• Dimensions and colours.
• Texts.
• Choice between lit-up, enabling and stay-on for each
button in each preset.
18
Lighting Technologies
STAGE & STUDIO MANAGEMENT SYSTEM
Code
Description
Reference
1105.31.200
House Light Control Main Unit
HLC1/MAIN
Handling
•
•
•
Up to 3 or 5 touchscreen PCs, Notebooks or Netbooks
(depending on licence).
Push button panels with 1, 2, 4 or 8 backlighted buttons via
CAT cabling.
Architectural Switches to be used with ADB’s SLIO-Module.
CPU/Processor
•
•
•
•
Plug-In modules in 19’’ rack for easy maintenance.
Storage of all important data directly in the CPU.
Compatible with Ethernet and CANBUS protocols.
Industrial design for 24h continuous operation.
Back-up
•
•
Optional back-up power supply.
User interface running on each USB Stick.
Protocols
•
•
•
•
•
DMX512-A, ARTNET, sACN.
CANBUS.
Client/Server architecture.
Direct control of ADB’s DimSwitch.
Fully compatible with ADB’s S2MS architectural control system.
Options & Accessories
1105.31.221
1105.31.210
1105.31.203
1105.31.205
1105.31.231
1105.31.232
1105.31.234
1105.31.238
1105.31.240
1105.31.245
1105.31.250
1105.31.251
1105.31.252
21’’ touchscreen PC
10’’ touchscreen PC
Software, up to 3 PCs
Software, up to 5 PCs
Push button unit (1 button)
Push button unit (2 buttons)
Push button unit (4 buttons)
Push button unit (8 buttons)
Power supply for up to 8 units daisy chain
CANBUS HUB 8 port for star-cabeling
SLIO converter for standard installation switches
Ethernet output ARTNET
Ethernet output sACN
HLC1/T21
HLC1/T10
HLC1/SOFT3
HLC1/SOFT5
HLC1/HSB2/1
HLC1/HSB2/2
HLC1/HSB2/4
HLC1/HSB2/8
HLC1/PSU24
HLC1/XHUB
HLC1/SLIO
HLC1/ARTNET
HLC1/SACN
19
Lighting Technologies
Dimmers
In 1925 ADB produced the first theatrical dimmers by applying rheostats
to the control of light in theatres, music halls and cinemas, soon followed
by the RHEOTOR® variable transformers.
From 1950 onwards, a serie of innovations resulted in dimmers based on
electronic tubes (thyratrons), then magnetic amplifiers and, in 1965, on
semiconductors (thyristors). These dimmers featured analogue control
until 1989 when ADB delivered to the Egyptian Television EURODIM 1, the
first all digital thyristor power dimming system. Further ADB innovations
added the full diagnostic and the instant back-up functions, which have
become standard on most dimmers.
Today, the forth generation of EURODIM dimmers, the EURODIM Twin
Tech, has come to life, bringing in a high density cabinet the best of two
worlds, i.e. Transistor Technology for state-of-the-art sine wave dimming,
and Thyristor Technology with its proven track record.
Another ADB innovation is DimSwitch, a solid state relay which offers a
unique dual capability: EURODIM Twin Tech thyristor modules (4 x 3 kW,
3 x 5 kW or 1 x 10 kW) can be programmed to function as either a switch
for non-dimmable loads, or as a normal dimmer with no minimum load
required.
20
Lighting Technologies
DIMMING
Code
Description
EURODIM Twin Tech
Reference
EURODIM Twin Tech is a high density dimmer cabinet designed specifically for professional
lighting installations in theatres, concert halls, TV studios. It brings the best of two worlds, i.e.
Transistor Technology for state-of-the-art sine wave dimming, and cost effective Thyristor
Technology with its proven track record.
The universal cabinet can host up to 128 channels of 3 kW (thyristors) or 2.5 kW (sine wave)
installed in 32 plug-in modules, with 2 more slots for central electronics and optional back-up.
An innovative concept allows for plug-in modules of any type or rating to be freely mixed and
moved in any configuration within the universal cabinet. This is made possible by the instant,
automatic module identification by the central electronics and represents the ultimate in
terms of flexibility. So no reprogramming is necessary whenever the cabinet configuration
is modified.
EURORACK Wall Mount Dimmer
Very compact, intelligent, all-digital dimmer rack for
wall mounting, designed for professional applications
in stage, TV studio and architectural lighting, whenever
high performance, space and cost are the prime
considerations.
MEMORACK 30
MIKAPACK 15/30
19” professional dimmer unit. Designed for Rack Mount
and Pack applications, whenever high performance,
quality, endurance and reliability are prime consideration.
Flight Case Dimmers &
Touring Racks
All-digital dimmer pack combining the performances
and the reliability of a professional dimmer at a
very competitive price. Designed for decentralised
dimming in fixed installations, in stage, TV studio and
architectural lighting.
MEMORACK and MIKAPACK
dimmer modules can also be
factory installed in suitable flight
cases for touring applications.
21
Lighting Technologies
One standard cabinet. No specific configuration of module places required. The cabinet fits all applications. Even if the final
dimmer circuit layout has not been yet defined when you have to start installation, you can already order your cabinets. The system is
future proof. You can add later on more circuits. Just order additional dimmer modules, put them in the cabinet, and plug and play!
The EURODIM Twin Tech Cabinet features:
•
2 identical control electronics/power supply slots
•
32 power module slots for up to 128 channels
•
Busbar with 32 HRC fuses for individual module protection
•
Optimized airflow system separated from all cabling
•
Output terminals for 10 mm2 wiring
(for other cable dimensions, contact ADB)
•
I/O card with individual DMX and Ethernet connection
per Control Processor
•
Local touch screen human interface for configuration
Absolutely free mixing of various module types in the same
cabinet:
•
Thyristor modules with min. 400 μs or 200 μs rise time
•
DimSwitch modules
•
True sine wave modules
•
Fluo modules with additional preheat function
•
Direct feed-through (non-dim) modules with MCB protection
•
Blank modules
Electrical protection compliant with the highest
international regulations:
•
Standard MCB 1P+N protection per circuit
•
Economical RCD per module protection
•
RCD per circuit protection meeting highest safety
standards
Simple and efficient configuration per dimmer circuit
•
5 control inputs (2 x DMX512/3 x ArtNet) with priority
level and priority rule
•
10 different dimmer laws available (6 user- configurable)
•
Response time
•
Preheat function
Advanced Interface and Control Features:
•
80 cues + 1 priority cue for individual programming
•
Individual failure rule per circuit in case of data loss
(hold, fade to black or fade to cue)
•
System wide configuration and diagnostic status
reporting with network PC
State-of-the-Art Diagnostic and Reporting
Functions in three Levels:
Three levels of dimmer reporting, diagnostics and management
are available either on the local user interface of the dimmer
cabinet or remotely via our optionally available ADB software.
TT - Management: this software allows for comfortable
and easy system wide configuration and diagnostic status
reporting with a network PC running on a Windows Operating
System. (OS and suitable PC are not supplied by ADB).
Standard diagnostics: always included in the standard
cabinet and with all module types:
•
Up to 300 LED indicators for status information of
power supply and data
•
Clear text messages on human interface indicating
e.g. missing supply phase, loss of control signals,
CPU failure, fan failure, ambient over-temperature
•
Module type scan
•
Recording of important events
Sequential diagnostics: optional - Hardware must be
separately ordered for the EURODIM Twin Tech cabinet.
The sequential diagnostics is a pre-show test routine for
circuit statuts reporting and is available with all standard
modules.
•
Value of dimmer load (kW)
•
Deviation from a reference load
•
No load and overload warning
•
Short circuit
Full diagnostic modules (optional exclusively with suitable
full diagnostic modules)
•
Automatic module type scan
•
Dimmer protection tripped
•
Overload and no-load warning
•
Load changes and comparison with stored reference
value
22
Lighting Technologies
Hybrid Dimming System
with plug-in thyristor and/or sine wave modules
Code
Description
Reference
1DY422000000
Universal cabinet
TTD/CAB/32
•
•
•
•
•
•
1115.10.100
Plug-in central control electronics
•
•
•
•
•
1115.10.110
Power supply:
- Star 3 NPE 400 (TN-S), 198 V to 264 V, 50/60 Hz.
- Rated current 600 A
- Individual module protection by an HRC supply fuse (50kA)
63A
- Set of 4 Lifting eye bolts included
Central electronics :
- Two slots for hosting 2 TT control units (CTRL) or 1 TT
control unit (CTRL) + 1 backup power supply unit (PSU)
Control signals:
- I/O board with:
- 4 DMX IN/THROUGH on screw terminals and RJ45
connector
- 2 Ethernet on RJ45 connector
- Remote CPU selection on screw terminals
Space for up to 32 plug-in dimmer modules
- 4 x 3 kW thyristors; up to 128 x 3 kW per cabinet
- 4 x 2.5 kW sine wave; up to 128 x 2.5 kW per cabinet
- 3 x 5 kW thyristors; up to 96 x 5 kW per cabinet
- 3 x 5 kW sine wave; up to 96 x 5 kW per cabinet
- 1 x 10 kW upon request
- Free mix of sine wave, thyristor and DimSwitch modules
- Free mix of different dimmer ratings
User-friendly human interface with backlit LCD touch-screen,
10 hard keys and control wheel
Separate compartments for power supply and output cabling
with easy front access.
TTD/CPU
LED indicators for power supply phases, data input and alarm
messages.
5 control inputs with free DMX addressing (patch) and flexible
merge rules per dimmer.
Protocols: DMX512-A, Art-Net (Art-DMX), ACN and RDM ready
Internal power supply works as back-up for optional second
TT control unit (CTRL).
Software functions described in the datasheet.
Plug-in back-up power supply unit
TTD/PSU
Mandatory in combination with single TT control unit.
1115.10.055
1113.33.010
1113.33.020
1113.33.030
1109.00.140
1113.33.040
Options
Human interface unit (must be ordered separatly for each TTD cabinet)
Power module lock
Cabinet junction plate (set of 2)
Sequential Diagnostics kit (optional hardware kit)
TT Management software (optional software)
Noise reduction for TTD cabinet
TTD/IHM
TTD/CAB/LOCK
TTD/CAB/JP
TTD/SEQD
TTD/DM/SOFT
TTD/CAB/NR
Dimensions
EURODIM Twin Tech: 1999 x 990 x 596 mm - Net weight: 229 kg
Net weight plug-in modules: 12 kg +/- 10% depending on module type
23
Lighting Technologies
Code
Reference
Description
Sine Wave Dimmer Modules
1120.26.634
4 x 2.5 kW module with full diagnostic
MCB/1P+N +RCD (30mA) protection per dimmer
TTD/SD4 x 2.5/MN/4R
1120.26.672
3 x 5 kW module with full diagnostic
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/SD3 x 5/MN/3R
DimSwitch Thyristor Modules with 400 μs Rise Time
in Dim Mode
1120.27.050
1120.27.060
1120.27.020
4 x 3 kW DimSwitch module with full diagnostic
MCB/1P+N protection per dimmer
TTD/HD4 x 3/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/HD4 x 3/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/HD4 x 3/MN/4R
1120.27.070
1120.27.080
1120.27.030
3 x 5 kW DimSwitch module with full diagnostic
MCB/1P+N protection per dimmer
TTD/HD3 x 5/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/HD3 x 5/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/HD3 x 5/MN/3R
1120.27.040
1 x 10 kW DimSwitch module with full diagnostic
MCB/1P+N + RCD (30mA) protection per dimmer
1120.27.250
1120.27.260
1120.27.220
4 x 3 kW DimSwitch module with standard diagnostic
MCB/1P+N protection per dimmer
TTD/H4 x 3/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/H4 x 3/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/H4 x 3/MN/4R
1120.27.270
1120.27.280
1120.27.230
3 x 5 kW DimSwitch module with standard diagnostic
MCB/1P+N protection per dimmer
TTD/H3 x 5/MN
MCB/1P+N protection per dimmer + (30mA) per DimSwitch module TTD/H3 x 5/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/H3 x 5/MN/3R
1120.27.240
1 x 10 kW DimSwitch module with standard diagnostic
MCB/1P+N + RCD (30mA) protection
TTD/HD1 x 10/MN/1R
TTD/H1 x 10/MN/1R
DimSwitch Thyristor Modules with 200 μs Rise Time
in Dim Mode
1120.26.304
1120.26.324
1120.26.344
4 x 3 kW DimSwitch module with full diagnostic
MCB/1P+N protection per dimmer
TTD/RD4 x 3/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/RD4 x 3/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/RD4 x 3/MN/4R
1120.26.354
1120.26.376
1120.26.383
3 x 5 kW DimSwitch module with full diagnostic
MCB/1P+N protection per dimmer
TTD/RD3 x 5/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/RD3 x 5/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/RD3 x 5/MN/3R
1120.26.004
1120.26.024
1120.26.044
4 x 3 kW DimSwitch module with standard diagnostic
MCB/1P+N protection per dimmer
TTD/R4 x 3/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/R4 x 3/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/R4 x 3/MN/4R
1120.26.054
1120.26.076
1120.26.083
3 x 5 kW DimSwitch module with standard diagnostic
MCB/1P+N protection per dimmer
TTD/R3 x 5/MN
MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/R3 x 5/MN/1R
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/R3 x 5/MN/3R
24
Lighting Technologies
Plug-in Digital Dimmer Modules
Code
Description
Reference
Thyristor Dimmer Modules for Fluorescent
Lamps with 200 μs Rise Time
1120.26.316
2 x 3 kW module with full diagnostic
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/FD2 x 3/MN/2R
1120.26.016
2 x 3 kW module with standard diagnostic
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/F2 x 3/MN/2R
Direct Feed-through (non-dim) Modules with
no Remote Control
1120.26.241
4 x 3 kW module with standard diagnostic
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/N4 x 3/MN/4R
1120.26.281
3 x 5 kW module with standard diagnostic
MCB/1P+N + RCD (30mA) protection per dimmer
TTD/N3 x 5/MN/3R
Accessories
1120.26.291
1120.26.292
Blank panel for 1 slot
Blank panel for 8 slots
TTD/TB
TTD/TB/8
25
Lighting Technologies
EURORACK 60
EURORACK 60
High Performance Thyristor Dimmer Racks for Professional Applications
Standard configurations:
•
24 x 3 kW
•
12 x 5 kW
A choice of various RCD ground fault detection systems is available to comply with various safety standards. Designed for
professional applications in stage, TV studio and architectural lighting, whenever high performance, flexibility and reliability are the
prime considerations.
The versatility of ADB wall mount dimmers makes them suitable for virtually any venue - from schools and churches, to theatres,
clubs and even larger professional venues, whenever a permanent lighting system is required.
Wall mount dimmers with their local memories, provide also an integrated solution for architectural applications such as
conference rooms, reception areas, exterior lighting, sound-and-light shows. Local memories and DMX control can be combined,
so that a EURORACK 60 can be shared between the stage and the foyer, or the houselights.
Set-up and User Interface Functionality
•
•
•
•
•
5-key keypad, 12-character LED display and user-friendly
scrolling menu for easy access to all dimmer functions.
Menu with different levels of access for different levels of
users, protected against tampering.
10 user-selectable dimmer laws: linear r.m.s voltage,
linear r.m.s to 120 V, TV laws (BBC, TV1, TV2), non-dim
with hysteresis, fluorescent, linear r.m.s voltage with
preheating, square law, user-programmable custom law.
Voltage reduction factor for extended lamp life or variable
load cable length compensation.
Professional grade filtering (200 μs rise time).
•
•
•
•
•
•
4000-step fade resolution, for noticeably smoother fades.
Global or individual programming of dimmer law, patching,
voltage reduction factor and smoothing.
Creation and storage of 20 lighting cues (19 + Priority)
each with fade and wait times, for back-up cues, architectural
lighting, or stand-alone operation.
Memories set by recording DMX levels or via the menu.
After loss of DMX data: maintain last levels, or wait and
fade to black.
All programmed data saved for unlimited time.
26
Lighting Technologies
Wall Mount Dimmer Racks
Code
Description
Reference
EURORACK 60
High performance thyristor dimming with 200 μs rise time
1DF602100002 24 x 3 kW - MCB/1P+N
1DF702100002 12 x 5 kW - MCB/1P+N
ERACK 60/243MN
ERACK 60/125MN
Dimensions
EURORACK 60: 1022 x 555 x 132 mm - Net weight: 43 kg
Options
RCD - 30 mA (1P+N)
Supply protection per group of 10 kW (4 x 3 kW or 2 x 5 kW)
Required quantity: 6 for 60 kW
RCD+MCB/1P+N-30mA - 6kA per dimmer
(this option to be choosen as alternative to RCD10/ERACK)
- for 24 x 3 kW dimmers
- for 12 x 5 kW dimmers
Main isolator switch 4P - 100 A
RCD30/ERACK
RCD+MCB/243
RCD+MCB/125
INP.SWITCH/ERACK
Accessories
1113.31.400
1113.99.120
1113.32.300
Stand-off brackets for 10 cm trunking space behind the rack (kit)
Dual DMX input retrofit kit (CPU board with data cables)
Cable entry panel with 27 universal entry seals and a steel PG31
cable gland + additional cable support rails (supplied as retrofit kit)
ARC/ERACK
KIT/2DMX/ERACK
PANN.PG/ERACK
27
Lighting Technologies
MEMORACK 30
MEMORACK 30 - 19" Rack Mount Dimmer
unit 30 kW
Intelligent, all-digital dimmer racks for 19" rack mounting in two
configurations; 12 x 3 kW or 6 x 5 kW.
The dimmers are suitable for continuous duty (3 kW, 5 kW or
12 kW per channel) at 35° C up to 30 kW.
This rack & Pack Mount Dimmer is designed for professional applications in stage, TV studio and architectural lighting, whenever
high performance, quality, endurance and reliability are the prime considerations. Ideal for touring, decentralised dimming or
extension of existing installations. They are available with lockable standard Harting compatible sockets.
This dimmer feature professional grade filtering of 200 μs for efficient attenuation of lamp filament noise. The circuitry is protected
against accidental 400 V wiring. Hard fired thyristors are used exclusively for control of tungsten halogen lamps, resistive and
inductive loads as well as transformer-fed low voltage lamps, and fluorescent lighting with suitable ballast.
Low noise fans provide effective cooling and are fitted with automatic fan-stop. Over-temperature protection through gradual
dimmer fade out.
This dimmer is designed for a power supply 230V/400V Star 3NPE (TN-S Net), 50/60Hz. Each dimmer circuit is protected
individually by a 1 Pole + Neutral disconnect Magnetic Circuit Breaker (MCB). The dimmers are suitable for continuous duty
(3 kW or 5 kW per channel) at 35° C up to 30 kW. The dimmers are controlled by a standard DMX512/1990 signal on front
mounted XLR-5 male connector and a XLR-5 female connector for signal feed through.
Programming and Set-up Functions
•
•
•
•
•
•
•
•
•
•
•
5-key keypad, 12 character LED display and user friendly menu for easy access to all dimmer functions.
Set-up functions can be limited to "DMX start address".
Local controls for creation and storage of 20 lighting cues.
Individual selection of dimmer address (patch), law, smoothing and voltage reduction factor.
Fade smoothing (4000-step resolution).
10 dimmer laws (one is user-programmable).
Professional grade filtering (200 μs rise time).
Local status reporting: 400 V - overtemperature - fan failure - processor check - presence of DMX signal - DMX and analogue
control levels.
Local test of a dimmer (steady, flash or chaser).
Automatic self-test capability.
Programmable response to a DMX failure.
28
Lighting Technologies
Intelligent Dimmer Packs for Professional Applications
Code
Reference
Description
MEMORACK 30
1DA16D100004 12 x 3 kW - MCB/1P+N - 2 x HARTING HAN16E out
1DA162100004 12 x 3 kW - MCB/1P+N - 2 x SOCAPEX 419 out
1DA2DE00004 6 x 5 kW - MCB/1P+N - 2 x HARTING HAN HsB 6+PE out
M30/123MN/HAR
M30/123MN/SOC
M30/65MN/HAR
Dimensions: 540 x 484 x 133 mm - Net weight: 20 kg
Notes:
• Power supply cable 1.5 m - 5 x 10 mm2, no connector attached
• Front panel DMX input on XLR5
Accessory
Carrying handle for MEMORACK
PORT/M30
Standard Outlet Panels (other outlets upon request)
12 x M30/123MN/SOC
6 x M30/65MN/HAR
29
Lighting Technologies
MIKAPACK
MIKAPACK 30 - 12 x 3 kW
Intelligent, all-digital dimmer packs as portable units or for 19"
rack mounting.
The dimmers are suitable for continuous duty of 12 channels of
3 kW at 35° C up to 30 kW.
For architectural applications, a DB9 connection allows to
easily recall 4 internal pre-programmed dimmer memories
via dry contacts.
MIKAPACK 15 - 6 x 3 kW
Intelligent, all-digital dimmer packs as portable units or for 19"
rack mounting.
The dimmers are suitable for continuous duty of 6 channels of
3 kW at 35° C up to 15 kW.
MIKAPACK dimmers feature similar performances to the MEMO dimmer range at a very competitive price without concessions
to quality and reliability. The products are designed for decentralised dimming in fixed installations, touring, stage, TV studio and
architectural lighting.
MIKAPACK dimmers are available with all standard European outlets and, for permanent installation or flight case applications,
with screw-on terminal strip.
An optional carrying handle is available for portable units. The units are shipped with the necessary parts for installation in 19”
racks.
Common features of the range are:
•
4 control buttons, 2 x 8 character LCD display and user-friendly menu for easy access to all dimmer functions.
•
First dimmer address selection.
•
Local test of a dimmer (steady or chaser).
•
6 pre-programmed chasers with 6 intensity levels.
•
Patch selectable per dimmer.
•
9 dimmer laws selectable per dimmer + 1 user programmable law.
•
Preheat selectable per dimmer.
•
Maximum dimmer levels selectable per dimmer.
•
Storage of 16 lighting cues.
•
Last lighting cue maintained in case of DMX signal interruption or loss. (cue, last DMX values or fading out).
•
Return to factory default values.
•
User customization of menu items.
Technical Specifications
•
Power supply: 230 V / 400 V Star 3NPE, 50/60 Hz.
•
Dimmer protection with MCB's, 1P+N.
•
Suitable for continuous duty at 35° C.
•
40 A power semiconductors.
•
Control protocol: DMX512A on XLR5, with galvanic isolation.
30
Lighting Technologies
Intelligent Dimmer Packs for General Purpose Applications
Code
Reference
Description
MIKAPACK 30
5021.03.200
5021.03.210
5021.03.220
5021.03.230
5021.03.240
5021.03.250
5021.03.260
5021.03.270
12 x 3 kW - MCB / 1P+N - 12 x single NF/CEBEC sockets
12 x 3 kW - MCB / 1P+N - 12 x single Schuko sockets
12 x 3 kW - MCB / 1P+N - Screw-on terminal strip
12 x 3 kW - MCB / 1P+N - 12 x single CEE 16 A (P17) sockets
12 x 3 kW - MCB / 1P+N - 12 x single Swiss sockets
12 x 3 kW - MCB / 1P+N - 12 x single UK 15 A sockets
12 x 3 kW - MCB / 1P+N - 2 x SOCAPEX connector
12 x 3 kW - MCB / 1P+N - 2 x Harting Output
MIK30/123MN/C
MIK30/123MN/D
MIK30/123MN
MIK30/123MN/CEE
MIK30/123MN/H
MIK30/123MN/UK
MIK30/123MN/SOC
MIK30/123MN/HART
Dimensions: 440 x 355 x 132 mm - Net weight: 15 kg
Notes:
• Power supply cable 1.5 m - 5 x 10 mm2 no connector attached
• Front panel DB9 connection for memory recall
• Front panel DMX input on XLR5
• Front brackets for 19" rack mounting
• 1P+N protection by MCB per channel
• 4 rubber feet
• Kit for installation in a 19" touring rack
MIKAPACK 15
5021.03.000
5021.03.010
5021.03.020
5021.03.030
5021.03.040
5021.03.050
6 x 3 kW - MCB / 1P+N - 6 x single NF/CEBEC sockets
6 x 3 kW - MCB / 1P+N - 6 x single Schuko sockets
6 x 3 kW - MCB / 1P+N - Screw-on terminal strip
6 x 3 kW - MCB / 1P+N - 6 x single CEE 16 A (P17) sockets
6 x 3 kW - MCB / 1P+N - 6 x single Swiss sockets
6 x 3 kW - MCB / 1P+N - 6 x single UK 15 A sockets
MIK15/63MN/C
MIK15/63MN/D
MIK15/63MN
MIK15/63MN/CEE
MIK15/63MN/H
MIK15/63MN/UK
Dimensions: 440 x 355 x 88 mm - Net weight: 10.3 kg
Notes:
• Power supply cable 1.5 m - 5 x 4 mm2 no connector attached
• Exception for MIK15/63M only connection on 3-phase
terminal strip
• Front panel DMX input on XLR5
• Front brackets for 19" rack mounting
• 1P+N protection by MCB per channel
• 4 rubber feet
• Kit for installation in a 19" touring rack
5021.03.100
5021.03.130
5021.03.150
Options and Accessories
Carrying handle for MIKAPACK 15
Truss clamping kit for MIKAPACK 15
Carrying handle for MIKAPACK 30
PORT/MIK15
KIT/CLAMP/MIK15
PORT/MIK30
Standard Outlet Panels (other outlets upon request)
12 x CEE 16 A (P17)
12 x NF/CEBEC or 12 x Schuko
31
Lighting Technologies
Touring Racks
The best Dimmers may well not be those you are used to...
MEMORACK and MIKAPACK dimmer modules can also be factory installed in suitable flight cases for touring applications.
The dimmers are all 1pole protected with neutral disconnect and the individual dimmer rack power supply is protected against any
ground fault by an RCD. This makes the dimmers safe and compliant with highest industry standards and international regulations.
Standard ADB touring racks are available in 24-channel or 12-channel configurations with European outlets (Schuko, NF/CEBEC,
CEE16 and/or multiconnectors: Harting, Socapex-compatible) without top patch. The dimmers, 19” panels and other hardware are
mounted on a self-supporting welded steel frame (19U) and fitted with heavy-duty caster for easy transport. Flight case is fitted
with removable covers for front and rear access.
Local Control without Lighting Desk:
•
•
•
•
•
Flashing of one dimmer for easy luminaire identification in a rig
Chaser
Setting of a dimmer level
Creation, editing and play-back of lighting cues depending on the dimmer range selected.
"Panic" cue which always overrides DMX
Custom Versions
ADB touring racks can be built to order with a custom combination of standard building blocks with a wide choice of patch panels,
direct outputs, RCD protections, multiconnectors, and accessories.
Custom versions are available upon request; please contact your ADB Distribution Partner or ADB Sales directly.
32
Lighting Technologies
Flight Case Dimmers for Touring
Code
Description
Reference
Flight Case Dimmer Systems
1001.40.201
1001.40.202
1001.40.203
1001.40.204
1001.40.205
1001.40.206
1001.40.207
Flight case equipped with MIKAPACK 30 - 24 x 3 kW
- 24 x twin CEBEC 10 / 16 A sockets
Flight case equipped with MIKAPACK 30 - 24 x 3 kW
- 24 x twin schuko 10 / 16 A sockets
Flight case equipped with MIKAPACK 30 - 24 x 3 kW
- 24 x single CEE 16 A (P17) sockets
Flight case equipped with MEMORACK 30 - 24 x 3 kW
- 24 x twin CEBEC 10 / 16 A sockets
Flight case equipped with MEMORACK 30 - 24 x 3 kW
- 24 x twin schuko 10 / 16 A sockets
Flight case equipped with MEMORACK 30 - 24 x 3 kW
- 24 x single CEE 16 A (P17) sockets
Flight case equipped with MEMORACK 30 - 12 x 5 kW
- 12 x single CEE 32 A sockets
FCMIK243MN/C
FCMIK243MN/D
FCMIK243MN/CEE
FCMR243MN/NC
FCMR243MN/D
FCMR243MN/CEE
FCMR125MN/CEE
Other configurations (connectors) and systems are available
upon request. These are some standard examples.
Please contact your ADB sales partner for further information.
Common Features:
Flightcase 12 U high, equipped either with two MIKAPACK 30
or two MEMORACK 30 dimmers. Flightcase is on 4 casters.
• detachable front and back lid for flightcase
• 125 A 5 pole CEE connector
• RCD and MCB 3P+N disconnect
• individual channels protected with 1P+N MCB
• control via DMX512
Dimensions: 820 x 550 x 725 mm - Net weight: +/- 98 kg
Options and Accessories
40081
40080
40082
40083
40084
32086
32135
40085
Kit Harting 4 connectors - instead of individual sockets
Kit Harting 4 connectors - parallel connection to existing sockets
Kit Socapex 4 connectors - instead of individual sockets
Kit Socapex 4 connectors - parallel connection to existing sockets
Kit Work Light
Power supply cable - (Legrand) HYPRA PA+FG
Power supply cable - 3P+N+PE (Marechal) PA+FG
Replacement of connector Legrand with a connector Marechal
FCHRAR4
FCHAR4.BRA
FCSOC4
FCSOC4.BRA
FCLIGHT
FCMOB.LEG
FCMOB.MAR
FCLEGMAR
33
Lighting Technologies
Theatre Spotlights
It has been a long way, paved with innovations, since the introduction
in 1938 of the first spotlights for stage lighting, until the advent in 2004
of WARP, a unique zoom profile spotlight featuring fingertip ring control
of 4 integrated beam shaping shutters, iris, gobo, zoom and focus, and
further providing a 360° endless rotation of gobos and each individual
shutter blade. WARP allows the creation of shapes which are impossible
with any other profile.
WARP is now a family including manual and motorized versions for either
halogen or discharge lamps, a special daylight fixture for rental companies,
and even a followspot.
A further key product line for ADB is the EUROPE range of PC, Fresnel
and zoom profile spotlights, an over 20-year success story, due to a great
extent to an earlier innovation, the condenser optics, which added a new
dimension to stage lighting.
ADB is committed to further develop innovative theatre spotlights.
The recent developments are devoted to modern LED light sources.
Our design specification are to deliver state of the art technology in the
recognizable design of EUROPE range luminaires.
34
Lighting Technologies
LIGHTING
Code
Description
EUROPE
range
- Theatre Spotlights
for 1000 / 1200 / 2000 W Halogen Lamps
The Reasons for Success:
Exceptional light output
Unparalleled light quality
Simple, highly robust construction
Harmonious, elegant and unobtrusive design
Easy to handle
Wide range of accessories
Highly favourable cost/performance ratio
...and satisfied professionals in over 40 countries
Reference
WARP - The Magic
of the Rings…
The first and only Zoom Profile Spotlight with fingertip Ring
Control, a major, patented Innovation for Stage Lighting
Professionals! Manual, motorized and daylight versions.
LED Spotlights
ADB presents a range of LED powered
luminaires based on the successful
EUROPE spotlight range.
EUROSPOT
General Purpose Theatre Spotlights
These very compact and lightweight
sub-kilowatt spotlights are easy to
operate, store and transport. Simple
design and rugged construction
provide good mechanical strength and
long term reliability. High performance
optics ensure excellent light output and
beam quality.
"A" SERIES
Sub-kilowatt Professional Theatre Spotlights
These high quality fixtures have established themselves as a reference
for sub-kilowatt spotlights. Their excellent reputation is due to the
combination of top level optics, a simple mechanical design and many
useful features providing the user with an excellent level of light, a very
homogeneous beam and a great handling facility.
35
Lighting Technologies
WARP
WARP - Zoom Profile Spotlight
The Magic of the Rings
Main Features:
•
•
•
•
•
•
•
•
•
•
•
•
12°-30° and 22°-50° versions
800 W halogen axial lamp, 230 V, 3200 °K, G9.5
Light output higher than with a 1200 W conventional profile
Dichroic glass reflector for low gate and beam temperature
B size gate for maximum gobo definition
Innovative ring control of focus, zoom, iris, gobo and shutters
Individual 360° rotation of shutters and gobos
Access to all controls from any position around the spotlight
Independent lamp position and spot / even adjustments
Holder for one iris diaphragm + one 360° rotating gobo (or two gobos without iris)
Stepless yoke positioning along the spotlight for balance adjustment
Innovative, compact, robust, ergonomic design
WARP/M - Motorized Zoom Profile Spotlight
The Silence of the Rings
The only fully automated Zoom Profile featuring totally silent operation
Main Features:
•
•
•
•
•
•
•
•
•
12° - 30° and 22° - 50° versions
Remote control via DMX 512 or Ethernet of all beam shaping functions + pan & tilt
RDM and ACN ready
Yoke repositioning better than 0.1°
3-phase stepper motors and no fan ensure true noisefree operation
Absolute sensor technology = no pan & tilt reset
Web page interface for bidirectional communication and diagnostics (runs on any browser)
Colour control with scroller for perfect colour matching
... and no more cumbersome shutters
The absence of fans is the first condition for a truly silent operation!
36
Lighting Technologies
WARP Zoom Profiles for 600/800 W Halogen Lamps
for Manual or Remote Operation
Code
Reference
Description
Zoom Profile Spotlights
1017.01.020
1017.01.030
1017.01.220
1017.01.230
WARP
WARP
WARP
WARP
12°-30° / 230 V
22°-50° / 230 V
12°-30° / 90 - 264 V
22°-50° / 90 - 264 V WARP/12-30
WARP/22-50
WARP/12-30/U
WARP/22-50/U
including :
• dichroic glass reflector
• 2 zoom lenses with anti-reflection coating
• patented ring control of all functions
• G 9.5 lampholder for axial lamp 800 W/230 V
• 1.6 m power supply cable without plug
• 1 metal filter frame (185 x 185 mm)
Dimensions
WARP 12°-30°: 748 x 495 x 213 mm - Net Weight: 12.2 kg
WARP 22°-50°: 655 x 495 x 213 mm - Net Weight: 11 kg
Motorized Zoom Profile Spotlights
1017.10.020
1017.10.030
1017.10.220
1017.10.230
WARP/M
WARP/M
WARP/M
WARP/M
12° - 30° / 230 V
22° - 50° / 230 V
12° - 30° / 90 - 264 V
22° - 50° / 90 - 264 V
WARP/M/12-30
WARP/M/22-50
WARP/M/12-30/U
WARP/M/22-50/U
including :
• 1 motorized yoke mounted on a control box
• 1 WARP/12-30 or /22-50 spotlight mounted into the yoke
with attached motorization unit
• 1.6 m power supply cable connected to the top box via a
twist-lock connector and with open ends on the other side
Dimensions
WARP/M 12°-30°: 748 x 550 x 805 mm - Net Weight: 32 kg
WARP/M 22°-50°: 658 x 550 x 805 mm - Net Weight: 32 kg
1050.40.400
Accessories
Metal filter frame (185 x 185 mm)
Safety grid (185 x 185 mm)
Double gobo holder (rotating) type B
Combined iris diaphragm & gobo holder (rotating) type B
Single gobo holder (non rotating) for WARP type B
Flight-case for WARP/M
Flight-case for 6 WARP
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
Hook clamp for WARP/M (2 required)
1.2 m spotlight safety cable
Colour changer for WARP
supplied with :
• 1 16-colour gel filter roll
• 1 adapter plate (APL-CC/WARP)
• 1 DMX/supply cable
Adapter plate for colour changer
2990.40.500
2990.40.405
Lamps
G 9.5, biplane filament, halogen lamp 230V-800W-3200K
G 9.5, biplane filament, halogen lamp 230V-600W-3200K
1090.52.205
1090.47.050
1000.40.100
1000.40.110
1000.40.120
1017.25.020
1017.25.030
1192.10.550
1192.10.560
1092.10.550
1092.10.600
1092.00.092
1050.40.405
Warning:
Lighting Technologies
PFM/185
GR/185
SP/2GO/WARP
SP/OR-GO/WARP
SP-GO/WARP
FLY/WARP/M1
FLY/WARP/6
A20
A25
A30
A40
CAS120/N
CC/WARP
APL-CC/WARP
800W/G9.5/3200K
600W/G9.5/3200K
WARP halogen spotlights are exclusively designed for a
biplane filament halogen lamp with a G9.5 base.
Any modification to accommodate another lamp is not allowed
and would void CE safety approval and product warranty.
37
WARP Daylight
WARP Zoom profile spotlight
adapted to host
a 575 W discharge lamp, available with two specific optical
systems. Also special version for rental and full motorization
with noiseless operation.
“Peak Performance” optical system with ellipsoidal reflector
optimized for maximum light output. The fixture gives an extra
“punch” of light, very useful for display and highlighting of
scenic elements and actors. This optical system is also used in
the new WARP Daylight Followspot.
“High Quality Image” features an ellipsoidal reflector optimized
for projecting an homogeneous light beam, essential for pattern
projection. This fixture can be used for applications where the
design requires very even light distribution, e.g. to uniformly
cover an acting area, or for high quality gobo projection.
Main Features:
•
•
•
•
•
•
•
•
•
•
•
G22 axial discharge lamp 575 W / 6000 K / 1000 h /
49000 lm hot restrike
Light output comparable with the one of a 2500 W
daylight lamp with condenser optic system
14500 lux at 10 m/12° with Peak Performance reflector
Dichroic glass reflector for low gate and beam
temperature
Patented ring control of focus, zoom, iris, gobos and
shutters
Individual 360° rotation of shutters and gobos
Access to all controls from any position around the
spotlight
Electronic flicker free ballast with integrated 24 V power
supply for accessories
Power supply: 230 V +/- 15% / 50-60 Hz or 90 - 264 V
Convection cooling -> no fan, no noise
Lightweight, compact, robust, ergonomic
WARP / DAYLIGHT
Save energy, space and weight !
A compact ellipsoidal zoom profile with a dichroic reflector,
a 575 W discharge lamp and a tremendous light output,
comparable to nearly any 2500 W fixture available today.
ADB’s WARP, the unique profile spotlight with the patented,
award winning ring control system is now producing the most
powerful, energy efficient light beam when equipped with a
575 W daylight discharge source. The light output is nearly
the same as with a 2500 W discharge lamp with condenser
optics, in a body that significantly reduces size and weight.
This unequalled performance is the result of a highly efficient
optical design, combining a sophisticated dichroic glass
reflector with coated lenses made of very pure optical glass
for maximizing light transmission and eliminating reflections.
Combining high light output, daylight, and reduced volume and
weight, WARP/DAYLIGHT zoom profile spotlights represent a
valuable addition to any Lighting Designer’s tool kit.
Using WARP/DAYLIGHT, clearer keylights can be obtained
because of the higher lighting intensity and colour
temperature.
Combining back light from WARP/DAYLIGHT with projection
patterns and tungsten front light can create an exciting visual
impression of otherwise monochrome and dull spaces.
With WARP/DAYLIGHT, you will save operating costs, as
the 575 W lamp consumes only a quarter of the energy of
a 2500 W lamp, as would be needed for a comparable light
output. Moreover, its purchase price is much lower.
Size and weight of the WARP/DAYLIGHT are significantly
reduced in comparison with any 2500 W fixture, which can
weigh well over 60 kg!
WARP/DAYLIGHT can be easily fitted in confined lighting
positions, where other spotlights are difficult to rig. It is
also easier to adjust (ring control), move and transport,
thus contributing to a non-negligible reduction of operating
costs. These benefits will certainly be appreciated by lighting
technicians, venue managers and rental companies.
A fully motorized version of WARP/DAYLIGHT is also available
with the same photometric characteristics as the manual one,
for applications that require silent operation, very accurate
repositioning, set up via Internet browser and full remote control
of pan, tilt, zoom, focus, gobos, iris, and 4 individual shutters.
38
Lighting Technologies
WARP Zoom Profiles for 575 W Discharge Lamp
for Manual or Remote Operation
Code
Reference
Description
Daylight Zoom Profile Spotlights
"Peak Performance"
1017.01.320
1017.01.330
1017.01.321
1017.01.331
WARP/DL
WARP/DL
WARP/DL
WARP/DL
12°-30° / 230V
22°-50° / 230V
12°-30° / 90-264V
22°-50° / 90-264V
WARP/DL/12-30
WARP/DL/22-50
WARP/DL/12-30/U
WARP/DL/22-50/U
Daylight Zoom Profile Spotlights
"High Quality Imaging"
1017.01.520
1017.01.530
1017.01.521
1017.01.531
WARP/DL
WARP/DL
WARP/DL
WARP/DL
12°-30° / 230V
22°-50° / 230V
12°-30° / 90-264V
22°-50° / 90-264V
WARP/DL/12-30/HQ
WARP/DL/22-50/HQ
WARP/DL/12-30/U/HQ
WARP/DL/22-50/U/HQ
including :
• dichroic glass reflector, two possibile types are available at the
time of ordering:
"Peak Performance Reflector" gives an extra boost of light
in the centre of the field.
"High Quality Imaging" renders a flat and even light distribution
• 2 zoom lenses with anti-reflection coating
• patented ring control of all functions
• G22 lampholder for 575W daylight discharge lamp
• flicker free electronic ballast, with integrated 24 V power supply
for accessories, mounted onto the yoke
• G22 hot restrike metal halide lamp 575W-6000K-1000h49000 lm (adjusted)
• 1.6 m power supply cable without plug
• 1 metal filter frame
Dimensions
WARP/DL 12°-30°: 800 x 475 x 500 mm - Net Weight: 18 kg
WARP/DL 22°-50°: 706 x 475 x 500 mm - Net Weight: 17.5 kg
Motorized Daylight Zoom Profile Spotlights
1017.10.520
1017.10.530
WARP/M/DL
WARP/M/DL
12°-30° / 90-264V
22°-50° / 90-264V
WARP/M/DL/12-30/U/HQ
WARP/M/DL/22-50/U/HQ
including :
• dichroic glass reflector "High Quality Imaging"
• G22 lampholder for 575W daylight discharge lamp
• motorized yoke mounted on a control box with integrated
flicker free electronic ballast and 24 V power supply for
accessories
• G22 hot restrike metal halide lamp 575W-6000K-1000h49000 lm (adjusted)
• WARP/DL/12-30 or /22-50 spotlight mounted into the yoke
with attached motorization unit
• 1.6 m power supply cable connected to the top box via a
twist-lock connector and with open ends on the other side
Dimensions
WARP/M/DL 12°-30°: 800 x 549 x 766 mm - Net Weight: 36 kg
WARP/M/DL 22°-50°: 706 x 549 x 766 mm - Net Weight: 35.5 kg
Note:
Due to higher heat dissipation of the electronic ballast at low voltage,
the WARP/DL/U range ballasts are equipped with a low noise fan to
ensure reliability.
39
Lighting Technologies
WARP Daylight
Code
Reference
Description
Rental Daylight Zoom Profile Spotlights
"Peak Performance"
1017.01.323
1017.01.333
WARP/DL/R
WARP/DL/R
12°-30° / 230V without ballast
22°-50° / 230V without ballast
WARP/DL/R/12-30
WARP/DL/R/22-50
Rental Daylight Zoom Profile Spotlights
"High Quality Imaging"
1017.01.523
1017.01.533
WARP/DL/R
WARP/DL/R
12°-30° / 230V without ballast
22°-50° / 230V without ballast
WARP/DL/R/12-30/HQ
WARP/DL/R/22-50/HQ
including :
• dichroic glass reflector
• 2 zoom lenses with anti-reflection coating
• patented ring control of all functions
• GX9.5 lampholder for 575W daylight discharge lamp
• igniter for cold strike
• 2 m power supply cable without plug
• 1 metal filter frame
• 1 safety switch
Warning: Rental daylight WARP are supplied without magnetic
or electronic ballast. This must be provided by the
customer before operation!
40
Lighting Technologies
WARP Zoom Profiles for 575W Discharge Lamp
for Manual or Remote Operation
Code
Description
Reference
Accessories for WARP Daylight
1050.40.410
1050.40.440
1050.40.420
Mechanical dimmer with adapter plate and DMX/supply cable
Filter frame holder cassette for the mechanical dimmer
"Combo" mechanical dimmer + colour changer with adapter
plate and DMX/supply cable (colour string not included!)
Filter frame holder cassette for the “Combo” mechanical dimmer
Adapter plate for colour changer
Metal filter frame (185 x 185 mm)
Safety grid (185 x 185 mm)
Double gobo holder (rotating) type B
Combined iris diaphragm & gobo holder (rotating) type B
Single gobo holder (non rotating) type B for WARP
Flight-case for WARP/M/DL
Flight-case for WARP/DL
Flight-case for WARP/DL/Rental
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
Hook clamp for WARP/M/DL (2 required)
1.2 m spotlight safety cable
MD/WARP
MD/CASS
1050.40.460
1050.40.400
1090.52.205
1090.47.050
1000.40.100
1000.40.110
1000.40.120
1017.25.020
1017.25.040
1017.25.030
1192.10.550
1192.10.560
1092.10.550
1092.10.600
1092.00.092
MD/CC/WARP
MD/COMBO/CASS
APL-CC/WARP
PFM/185
GR/185
SP/2GO/WARP
SP/OR-GO/WARP
SP-GO/WARP
FLY/WARP/M1
FLY/WARP/DL
FLY/WARP/6
A20
A25
A30
A40
CAS120/N
Note: WARP/DL/Rental will fit into the flight case for 6 WARP
spotlights
CC/WARP
COMBO/WARP
MD/WARP
41
Lighting Technologies
LED Spotlights
Introducing the EUROPE LED Spotlight RANGE
The familiar high quality performance of ADB’S EUROPE RANGE spotlights now combined with the benefits of modern LED
technology.
Go green and make a significant reduction in dimmer energy and air-conditioning power consumption.
ADB presents a range of LED powered luminaires based on the successful EUROPE spotlight range.
The first two luminaires – a profile and a fresnel spotlight are equipped with a high power LED light sources – offering two different
colour temperatures, daylight and tungsten halogen compatible. This new generation of theatre spotlights is designed to deliver high
light output and high colour rendering index – equivalent to our traditional EUROPE range fitted with 1000 W tungsten halogen lamps.
The EUROPE Range LED fixtures are equipped with a user interface featuring convenient settings and modes to simplify work.
The EUROPE Range LED luminaires use the same accessories and optical systems as traditional EUROPE Range fixtures and
therefore fit perfectly into established working practice without demanding any sacrifices in the quality of lighting designs.
This means that lighting designers will not have to adapt creative techniques. Conventional 1 kW EUROPE Range spotlights can
be easily be exchanged anytime for the new EUROPE Range LED fixtures.
By delivering state-of-the-art technical innovation through a recognizable design, ADB EUROPE LED Spotlights offer a smooth
transition into the era of high performance, energy-efficient spotlights, which fit perfectly for theatres, events, architectural applications
and more generally spoken for applications with limited power supplies.
* Symbolic images
42
Lighting Technologies
LED Spotlights
Code
Description
Reference
Fresnel LED Spotlight 13° - 59°
LED Fresnel luminaire
with tungsten halogen colour temperature 3200 K
with daylight colour temperature 5600 K
F101/LED/TH
F101/LED/DL
Supplied with :
• 150 mm Fresnel lens
• 1 metal filter frame (185 x 185 mm)
• 1.5 m power supply cable with POWERCON twist-lock
connector and with open ends on the other side
Profile LED Spotlight 15° - 31°
LED profile spotlight
with tungsten halogen colour temperature 3200 K
with daylight colour temperature 5600 K
DS105/LED/TH
DS105/LED/DL
Supplied with :
• 2 zoom lenses and condenser optics
• Set of 4 beam shaping shutters
• 1 metal filter frame (185 x 185 mm)
• 1.5 m power supply cable with POWERCON twist-lock
connector and with open ends on the other side
1090.52.205
1001.50.115
1092.00.094
1000.40.080
1000.40.090
1000.19.531
1000.19.631
1000.19.541
1192.10.550
1192.10.560
1092.10.550
1092.00.092
1090.47.050
Accessories
Metal filter frame (185 x 185 mm)
Rotatable 4-leaf barndoor without safety cable
0.75 m safety cable for barndoors
"A" size gobo holder with retention ring
"B" size gobo holder
Iris diaphragm Ø 75
Iris diaphragm Ø 80
Iris diaphragm Ø 80 with black-out
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
Safety grid (185 x 185 mm)
PFM/185
CFN/185
CAS/CF/75
SP-GO/A
SP-GO/B
OR/75
OR/80
OR/80/BO
A20
A25
A30
CAS120/N
GR/185
43
Lighting Technologies
EUROPE Range
PC and Fresnel Spotlights for 1000 / 1200 W Halogen Lamps
C101
10° - 65°
Plano-Convex
This spotlight, based on high efficiency optics, produces a sharp-edged
beam. It can be used for top, front or side lighting.
Field angle adjustable from 10° to 65° (7.5° - 60° beam angle).
Dimensions: 480 x 340 x 420 mm
Net weight: 8 kg
C103
7° - 61°
Prism-Convex
This spotlight, based on high efficiency optics, produces a semisharp-edged
beam. It can be used for top, front or side lighting.
Field angle adjustable from 7° to 61° (3.5°- 55° beam angle).
Dimensions: 480 x 340 x 420 mm
Net weight: 9.6 kg
F101
13° - 59°
Fresnel
This spotlight, based on high efficiency optics, produces a softedged beam.
It can be used on large stages or for studio lighting.
Field angle adjustable from 13° to 59° (7.5°- 52° beam angle).
Dimensions: 340 x 340 x 420 mm
Net weight: 6 kg
44
Lighting Technologies
The Ultimate in Light Output
1000 / 1200 W PC & Fresnel Spotlights
Code
Description
Reference
1016.12.150
C 101
C 101
Plano-convex spotlight 10° - 65°
Supplied with :
• Ø 150 mm plano-convex lens
• Glass diffuser
• GX 9.5 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 integrated safety grid
• 1 metal filter frame (185 x 185 mm)
1010.12.150
C 103
Prism-convex spotlight 7° - 61°
C 103
Supplied with :
• Ø 150 mm prism convex lens
• GX 9.5 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 integrated safety grid
• 1 metal filter frame (185 x 185 mm)
1011.12.150
F 101
Fresnel spotlight 13° - 59°
F 101
Supplied with :
• Ø 150 mm Fresnel lens
• GX 9.5 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 integrated safety grid
• 1 metal filter frame (185 x 185 mm)
Extra charge for pole operation
• 2 movements : pan + tilt
• 3 movements : pan + tilt + focus
CP/PC-F/2M
CP/PC-F/3M
Motorized yoke: upon request
1090.52.205
1001.50.115
1092.00.094
1192.10.550
1192.10.560
1092.10.550
1092.00.092
1090.47.050
Accessories
Metal filter frame (185 x 185 mm)
Rotatable 4-leaf barndoor without safety cable
0.75 m safety cable for barndoors
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
Safety grid (185 x 185 mm)
PFM/185
CFN/185
CAS/CF/75
A20
A25
A30
CAS120/N
GR/185
Halogen lamps 230 V - GX 9.5 : see relevant page
45
Lighting Technologies
EUROPE Range
1000 / 1200 W Zoom Profile Spotlights with Condenser Optics
DW 105
15° - 38°
Dimensions: 710 x 340 x 420 mm
Net weight: 15 kg
DS 105
15° - 31°
Dimensions: 710 x 340 x 420 mm
Net weight: 14 kg
DSN 105 11° - 23°
Dimensions: 790 x 340 x 420 mm
Net weight: 15.1 kg
DN 105
9° - 20°
Dimensions: 920 x 340 x 420 mm
Net weight: 18.4 kg
DVW 105 38° - 57°
Dimensions: 600 x 340 x 420 mm
Net weight: 13.5 kg
46
Lighting Technologies
The Ultimate in Light Output
1000 / 1200 W Zoom Profile Spotlights
Code
Description
Reference
1012.10.506
DW105
Zoom profile spotlight 15° - 38°
Supplied with :
• 3 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• GX 9.5 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (185 x 185 mm)
DW105
1012.10.606
DS105
Zoom profile spotlight 15° - 31°
Supplied with :
• 2 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• GX 9.5 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (185 x 185 mm)
DS105
1012.10.806
DSN105
Zoom profile spotlight 11° - 23 °
Supplied with :
• 2 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• GX 9.5 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (185 x 185 mm)
DSN105
1012.10.706
DN105
Zoom profile spotlight 9° - 20°
Supplied with :
• 2 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• GX 9.5 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (245 x 245 mm)
DN105
1012.10.906
DVW105 Zoom profile spotlight 38° - 57°
Supplied with :
• 4 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• GX 9.5 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (185 x 185 mm)
DVW105
Extra charge for pole operation, 2 movements, pan + tilt
Motorized yoke: upon request
CP/D1/2M
1090.52.205
1090.52.305
1090.47.050
1090.47.060
1000.40.080
1000.40.090
1000.19.531
1000.19.631
1000.19.541
1192.10.550
1192.10.560
1092.10.550
1092.00.092
Accessories
Metal filter frame (185 x 185 mm) for DW, DVW, DS and DSN types
Metal filter frame (245 x 245 mm) for DN type
Safety grid (185 x 185 mm) for DW, DVW, DS and DSN types
Safety grid (245 x 245 mm) for DN type
"A" size gobo holder with retention ring
"B" size gobo holder
Iris diaphragm Ø 75
Iris diaphragm Ø 80
Iris diaphragm Ø 80 with black-out
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
PFM/185
PFM/245
GR/185
GR/245
SP-GO/A
SP-GO/B
OR/75
OR/80
OR/80/BO
A20
A25
A30
CAS120/N
Halogen lamps 230 V - GX 9,5 : see relevant page
47
Lighting Technologies
EUROPE Range
PC and Fresnel Spotlights for 2000 W Halogen Lamps
C201
5° - 65°
Plano-Convex
This spotlight, based on high efficiency optics, produces a sharp-edged beam.
It can be used for top, front or side lighting.
Field angle adjustable from 5° to 65° (3,5° - 61° beam angle).
Dimensions: 545 x 400 x 510 mm
Net weight: 12.6 kg
C203
8° - 58°
Prism-Convex
This spotlight, based on high efficiency optics, produces a semi-sharp-edged
beam. It can be used for top, front or side lighting.
Field angle adjustable from 8° to 58° (4.5° - 54° beam angle).
Dimensions: 545 x 400 x 510 mm
Net weight: 12.6 kg
F201
12° - 61°
Fresnel
This spotlight, based on high efficiency optics, produces a soft-edged beam. It
can be used on large stages or for studio lighting.
Field angle adjustable from 12° to 61° (6.5° - 55° beam angle).
Dimensions: 425 x 400 x 510 mm
Net weight: 9.6 kg
48
Lighting Technologies
The Ultimate in Light Output
2000 W PC & Fresnel Spotlights
Code
Description
Reference
1013.20.150
C 201
C201
Plano-convex spotlight 5° - 65°
Supplied with :
• Ø 200 mm PC lens
• GY16 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 integrated safety grid
• 1 metal filter frame (245 x 245 mm)
1010.20.150
C 203
Prism-convex spotlight 8° - 58°
C203
Supplied with :
• Ø 200 mm prism-convex lens
• GY16 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 integrated safety grid
• 1 metal filter frame (245 x 245 mm)
1011.20.150
F 201
Fresnel spotlight 12° - 61°
F201
Supplied with :
• Ø 200 mm Fresnel lens
• GY16 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 integrated safety grid
• 1 metal filter frame (245 x 245 mm)
Extra charge for pole operation
• 2 movements: pan + tilt
• 3 movements: pan + tilt + focus
CP/PC-F/2M
CP/PC-F/3M
Motorized yoke: upon request
Accessories
1090.52.305
1090.47.060
1001.50.215
1092.00.094
1192.10.550
1192.10.560
1092.10.550
1092.00.092
Metal filter frame (245 x 245 mm) for DN type
Safety grid (245 x 245 mm)
Rotatable 4-leaf barndoor without safety cable
0.75 m safety cable for barndoors
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
PFM/245
GR/245
CFN/245
CAS/CF/75
A20
A25
A30
CAS120/N
Halogen lamp 230 V - GY 16 : see relevant page
49
Lighting Technologies
EUROPE Range
2000 W Zoom Profile Spotlights with Condenser Optics
DS 205
13° - 36°
Dimensions: 810 x 420 x 500 mm
Net weight: 22.7 kg
DN 205
10° - 22°
Dimensions: 935 x 420 x 500 mm
Net weight: 22.9 kg
DVW 205 30° - 54°
Dimensions: 700 x 420 x 500 mm
Net weight: 21.3 kg
50
Lighting Technologies
The Ultimate in Light Output
2000 W Zoom Profile Spotlights
Code
Description
1012.20.606
DS 205
Reference
zoom profile spotlight 13° - 36°
DS 205
Supplied with :
• 3 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• Low noise fan
• GY16 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (245 x 245 mm)
1012.20.706
DN 205
zoom profile spotlight 10° - 22°
DN 205
Supplied with :
• 2 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• Low noise fan
• GY16 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (245 x 245 mm)
1012.20.906
DVW 205
zoom profile spotlight 30° - 54°
DVW 205
Supplied with :
• 4 zoom lenses and condenser optics
• Anti-reflection coating of all lenses
• Low noise fan
• GY16 lampholder
• Set of 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (245 x 245 mm)
Extra charge for pole operation, 2 movements, pan + tilt
CP/D2/2M
Motorized yoke: upon request
Accessories
1090.52.305
1090.47.060
1000.40.080
1000.40.090
1000.19.531
1000.19.631
1000.19.541
1192.10.550
1192.10.560
1092.10.550
1092.00.092
Metal filter frame (245 x 245 mm) for DN type
Safety grid (245 x 245 mm)
"A" size gobo holder with retention ring
"B" size gobo holder
Iris diaphragm Ø 75
Iris diaphragm Ø 80
Iris diaphragm Ø 80 with black-out
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
PFM/245
GR/245
SP-GO/A
SP-GO/B
OR/75
OR/80
OR/80/BO
A20
A25
A30
CAS120/N
Halogen lamps 230 V - GY 16 : see relevant page
51
Lighting Technologies
"A" RANGE
Professional Theatre Spotlights for 300 / 500 / 650 W Halogen Lamps
A 56 C
9° - 66°
Prism Convex
This spotlight produces a high level output and a top quality
diffused edged beam from a tight spot to a wide flood with beam
angles from 5° to 63° (field angle 9° - 66°). Providing a tighter
and more controlled beam than a Fresnel, the A 56 C is ideal for
front or side lighting on small stages where a maximum of 650 W
is required.
Dimensions: 290 x 225 x 330 mm
Net weight: 3.5 kg
A 57 F
14° - 59° Fresnel
This spotlight produces a high output level and a soft-edged
beam, variable from a tight spot of 8° to a wide flood of 51° (field
angle 14° - 59°). It is intended for side, back or general lighting,
as well as for application in small studios.
Dimensions: 290 x 225 x 330 mm
Net weight: 3.4 kg
A 59 Z
16° - 35°
Zoom Profile with
Condenser Optics
This spotlight, fitted with a spherical mirror and condenser optics,
produces excellent light levels and beam quality. As a variable
beam angle profile, the A 59 Z has a very useful range of 16° to
35° and provides a good directional light with cut off beam and
variable sharpness. It is perfect for use in smaller venues and to
highlight details on larger stages.
Dimensions: 515 x 225 x 330 mm
Net weight: 5.8 kg
52
Lighting Technologies
Professional Theatre Spotlights
for 300 / 500 / 650 W Halogen Lamps
Code
1005.31.560
Description
Reference
A 56 C
A 56 C
Prism convex spotlight 9° - 66°
Supplied with :
• Ø 120 mm prism convex lens
• GY 9.5 lampholder
• 2 m silicone power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 safety grid (155 x 155 mm)
• 1 metal filter frame (155 x 155 mm)
1005.31.570
A 57 F
Fresnel spotlight 14° - 59°
A 57 F
Supplied with :
• Ø 120 mm Fresnel lens
• GY 9.5 lampholder
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 safety grid
• 1 metal filter frame (155 x 155 mm)
1005.31.590
A 59 Z
Zoom profile spotlight 16°- 35°
A 59 Z
Supplied with :
• 2 zoom lenses and condenser optics
• GY 9.5 lampholder
• 4 beam shaping shutters with heat insulated handles
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 metal filter frame (155 x 155 mm)
Accessories
1090.52.110
3203.10.130
1090.61.010
1000.19.200
1000.40.065
1092.10.505
1192.10.550
1192.10.560
1092.10.550
1092.00.092
Metal filter frame (155 x 155 mm)
Safety grid (155 x 155 mm)
Rotatable 4-leaf barndoor for A 57 F and A 56 C
Iris diaphragm for A 59 Z
Double gobo holder for A 59 Z
Hook clamp for Ø 21 to Ø 48 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
PFM/A650
GR/A650
CF/A650
OR/A650
SP/A650
A6
A20
A25
A30
CAS120/N
53
Lighting Technologies
EUROSPOT
General Purpose Theatre Spotlights for 300 / 500 / 650 W Halogen Lamps
F 51
18° - 65° Fresnel spotlight
The F51 is characterised by a soft-edged beam variable from a
tight spot of 18° to a wide flood of 65°.
Dimensions: 245 x 220 x 240 mm
Net weight: 2.2 kg
C 51
9°- 60°
Prism-convex spotlight
The C51 is characterised by a semi-sharp edged beam variable
from a tight spot of 9° to a wide flood of 60°.
Dimensions: 310 x 220 x 260 mm
Net weight: 2.7 kg
DS 54
18° - 38° Zoom profile spotlight
with condenser optics
The DS54 is a variable angle profile spotlight, equipped with
2 individually adjustable zoom lenses. It provides a sharp or
soft-edged beam over a very useful range of 18° to 38°. Zoom
focusing is smooth and stable in any position. The use of high
quality condenser optics results into a superior beam quality and
very accurate imaging capabilities.
Dimensions: 440 x 220 x 260 mm
Net weight: 3.7 kg
DW 54
30° - 47° Zoom profile spotlight
with condenser optics
The DW54 is a variable 30°-47° wide angle profile spotlight,
equipped with 2 individually adjustable zoom lenses. Zoom
focusing is smooth and stable in any position.The use of high
quality condenser optics results into an even light distribution at
wide angles with very accurate imaging capabilities. This makes
the DW 54 a very useful complement to the DS 54 (18°-38°) of
the same family.
Dimensions: 370 x 220 x 260 mm
Net weight: 3.5 kg
54
Lighting Technologies
General Purpose Theatre Spotlights
for 300 / 500 / 650 W Halogen Lamps
Code
Description
Reference
1005.32.100
F 51
F51
Fresnel spotlight 18° - 65°
Supplied with :
• Ø 112 mm Fresnel lens
• GY9.5 lampholder
• 1 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 safety grid
• 1 metal filter frame (125 x 125 mm)
1005.32.110
C 51
Prism-convex spotlight 9° - 60°
C51
Supplied with :
• Ø 112 mm prism convex lens
• GY9.5 lampholder
• 1 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 safety grid
• 1 metal filter frame (125 x 125 mm)
1005.32.130
DS 54
Zoom profile spotlight 18°- 38°
DS54
Supplied with :
• 2 zoom lenses and 1 condenser lens
• GY9.5 lampholder
• 4 beam shaping shutters with isolated handles
• 1 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 safety grid
• 1 metal filter frame (125 x 125 mm)
1005.32.140
DW 54
Zoom profile spotlight 30°- 47°
DW54
Supplied with :
• 2 zoom lenses and 1 condenser lens
• GY9.5 lampholder
• 4 beam shaping shutters with isolated handles
• 1 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
• 1 safety grid
• 1 metal filter frame (125 x 125 mm)
Accessories
1090.52.905
1090.62.205
1000.19.645
1000.40.045
1092.10.505
1192.10.550
1192.10.560
1092.10.550
1092.00.092
Metal filter frame (125 x 125 mm)
Rotatable 4-leaf barndoor for F51 and C51
Iris diaphragm for DS and DW profiles
Gobo holder for DS and DW profiles
Hook clamp for Ø 21 to Ø 48 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m spotlight safety cable
PFM/EURO
CF/EURO
OR/EURO
SP/GO/EURO
A6
A20
A25
A30
CAS120/N
Halogen lamps 230 V - GY 9.5 : see relevant page
55
Lighting Technologies
Multi-Purpose Luminaires
After halogen, discharge and fluo light sources, ADB could not ignore
the LED technology, hence another major innovation, ALC4, a modular
LED RGB+White lighting fixture for use as cyclight or fill light for stage
and studio lighting. With only 4 x 40 W LED sources, ALC4 generates the
equivalent light output and colour rendition of a 1000 W halogen fixture
with a 1 million-colour palette via DMX.
48 ALC4 fixtures were the key visual element of Jean Michel Jarre's 2010
European Tour acclaimed by thousands of fans.
Further multi-purpose luminaires include a broad choice of conventional
fill lights and cyclorama lights.
56
Lighting Technologies
LIGHTING
Code
Description
ALC4-2
LED Fixture
Reference
ACP Cyclorama
Lights
With ALC4-2, your Cycloramas will never look the
same!
ALC4-2 gives you a brilliant palette of 1 million internally
mixed fringe-free colours, including pure yellow and soft
ambers, and seven white light presets from 2700 K to
Daylight 6500 K. For even more flexibility, the system can
be controlled by DMX in different modes – in particular, in
a colour-tuneable RGB mode, or a white-tuneable CCT
mode. All with extraordinary colour consistency and only
200 W power consumption.
The ACP Cyclorama lights features a unique combination
of an asymmetrical reflector and 2, highly reflective side
mirrors to provide high quality lighting for both studio and
stage applications.
LF/HF 1000 Fill Lights
These 2 fixtures, fitted with a slewing aluminium reflector, are intended
to provide even and soft lighting at short distance. They are particularly
suitable for creating a diffused, homogenous light level for small to medium
size theatre stages, TV studios, conference rooms...
57
Lighting Technologies
ALC4-2
General Characteristics
•
Cyclorama and fill light fixture for Theatre and TV Studio Lighting.
•
Dynamic RGB + White module with 4 x 50 W LED sources, factory calibrated.
•
Even light distribution through high brilliance aluminum reflector.
•
Selectable beam angle through asymmetric or symmetric reflector, or 4-leaf reflective barndoor.
•
Full RGB + White allowing more than one million colours, including pure yellow and full amber.
•
Compact, light weight unit.
User Benefits
•
Excellent color uniformity between several sources with no color separation between beams and no coloured shadows.
•
7 “calibrated” preset “White” levels between 2700K and 6500K.
•
Stepless control from warm-white 2700K to daylight 6500K.
•
Closed-loop optical feedback circuit in each LED source guarantees consistency in colour, white and light output.
•
Creation of various background illuminations and / or effects.
•
Smooth, flicker-free light output, without any colour or white changes when dimmed.
•
High efficiency and major energy savings in comparison with halogen fixtures.
•
Removable reflector allowing other beam control accessories.
•
Reduced CO2 footprint compared with conventional halogen fixtures.
ALC4-2 is a unique, state-of-the-art product, another ADB innovation
ALC4-2
REF/SYM/ALC4
58
Lighting Technologies
LED Fixtures
Code
Description
Reference
1060.20.000
ALC4-2 - LED RGB+White Fixture
ALC4-2
Supplied with :
• 4 StagePainter D60 2000 light sources
• clamping tool for mounting the instrument on a pipe with an
optional hook
• 1.6 m power supply cable with POWERCON twist-lock
connector and with open ends on the other side
ALC4-2 Features:
• high illumination quality
• closed-loop optical feedback for consistent color and intensity
• white color temperature presets from 2,700K to 6,500K
• completely mixed source with excellent color uniformity and
no color separation in the beam
• no degrading ultraviolet or uncomfortable infrared wavelengths
in beam
• sustainable and environmentally friendly
• robust package absent of fragile glass
• reduced CO2 footprint compared to conventional halogen fixtures
• no waste (gels, lamps, etc.) throughout the product life
Dimensions
with asymmetric reflector: 380 x 605 x 495 mm
without reflector: 182 x 496 x 268 mm
Net weight: 10 kg
Accessories
1060.10.010
1060.10.020
1060.10.050
1060.10.030
1060.10.040
REF/SYM36/ALC4
Asymmetric Cyclorama reflector
Symmetric reflector for further throw distance
Symmetric reflector for further throw distance 36°
Barndoor with high efficiency reflecting surface
Interconnection power supply cable (2 m)
REF/ASYM/ALC4
REF/SYM/ALC4
REF/SYM36/ALC4
REF/CF/ALC4
PWRLNK/2M/ALC4
REF/CF/ALC4
REF/ASYM/ALC4
59
Lighting Technologies
Cyclorama Lights
ACP 1000
Cyclorama light with asymmetrical reflector for use with gel filter
Dimensions: 390 x 450 x 230 mm
Net weight: 5 kg
The ACP Cyclorama lights features a unique combination of an asymmetrical reflector and 2, highly reflective side mirrors to
provide high quality lighting for both studio and stage applications.
These fixtures are ideal for creating an homogenous light level or for stage set lighting, e.g.
•
•
•
vertical, even illumination of cyclorama or horizon screen
diffused back lighting
asymmetrical soft light
These compact and lightweight luminaires are designed for use with 625 W, 1000 W or 1250 W clear or frosted halogen lamps,
and either gel or glass colour filters.
Excellent ventilation by natural convection ensures long life of lamps and filters.
Flexibility is provided by a large choice of single, double, triple or quadruple units assembled in either horizontal, vertical or square
formats.
Each combination can be supplied for manual or pole operation.
60
Lighting Technologies
625 W / 1000 W / 1250 W Cyclorama Lights
Code
Reference
Description
ACP 1000 Cyclorama
1060.02.020
1060.02.040
1060.02.100
1060.02.120
1060.02.060
1060.02.080
single for
double horizontal for
double vertical for
triple in line for
quadruple in line for
quadruple in square for
- gel filters
- gel filters
- gel filters
- gel filters
- gel filters
- gel filters
ACP1001
ACP1002H
ACP1002V
ACP1003H
ACP1004H
ACP1004C
Supplied with :
• R7S lampholder
• Safety grid with 3 mm meshing
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
Extra charge for pole operation (1 movement : pan)
Accessories
1090.16.040
1090.16.080
1192.10.550
1192.10.560
1092.10.550
1092.10.505
1092.00.092
Vertical barndoors (set of 2 pieces, 1 right & 1 left)
Horizontal barndoor (one bottom part)
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
Hook clamp for Ø 21 to Ø 48 mm tubes
1.2 m safety cable
CFV/ACP
CFH/ACP
A20
A25
A30
A6
CAS120/N
Halogen Lamps 230 V - R7S : see relevant page
61
Lighting Technologies
Fill Lights
LF 1000 Fill Light with symmetrical Reflector
HF 1000 Fill Light with asymmetrical Reflector
General purpose fill light for creating even and soft lighting
at short distance. Fitted with a 1000 W lamp, it will yield an
axial light intensity of 10,000 cd. It can also be used as a high
intensity batten when 4 units or more are mounted in a row.
Small cyclorama light for perfectly diffused lighting of projection
plans, such as cyclorama, back cloth, wall or scenery. A 4-unit
row can be used as a 4-colour cyclorama light. Fitted with a
1000 W lamp, a row of 7 units at 3 m from the cloth, equidistant
from each other, will provide a light level of 1000 lux in the
median lines and in the plane of a 10 m wide and 5 m high
cyclorama.
Dimensions: 350 x 190 x 70 mm
Net weight: 1.5 kg
Dimensions: 350 x 190 x 70 mm
Net weight: 1.5 kg
These 2 fixtures, fitted with a slewing aluminium reflector, are intended to provide even and soft lighting at short distance. They are
particularly suitable for creating a diffused, homogenous light level for small to medium size theatre stages, TV studios, conference
rooms...
LF 1000 and HF 1000 fill lights are designed for 230 V / 625 W, 1000 W or 1250 W tubular halogen lamps. Their small size and
low weight make them easy to transport and install.
62
Lighting Technologies
625 W / 1000 W / 1250 W Fill Lights
Code
Description
Reference
LF / HF 1000 Fill Lights
1035.01.010
1035.05.120
LF 1000 - with symmetrical reflector
HF 1000 - with asymmetrical reflector
LF1000
HF1000
Supplied with :
• R7S lampholder
• Safety grid with 3 mm meshing
• 2 m power supply cable (2 x 1.5 + 1.5 mm2) without plug
Accessories
1035.01.060
1035.08.110
1035.08.210
1035.08.310
1035.08.410
1035.08.910
1092.10.505
1192.10.550
1192.10.560
1092.10.550
1092.00.092
Filter frame holder cassette
Set of 2 vertical barndoors for LF/HF 1000
Set of 2 horizontal barndoors for LF/HF 1000 or ACV/F 1000
Set of 2 vertical barndoors for ACV/F 1000
Set of 4 filter frames for glass filters with safety grid
Bracket stand for assembly of 4 LF/HF 1000
Hook clamp for Ø 21 to Ø 48 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 35 to Ø 50 mm tubes
Hook clamp for Ø 45 to Ø 60 mm tubes
1.2 m safety cable
ACV/F1000
CFV1/F1000
CFH/F1000
CFV2/ACV/F1000
PF/ACV/F1000
BAR/F1000
A6
A20
A25
A30
CAS120/N
Halogen Lamps 230 V - R7S : see relevant page
63
Lighting Technologies
Television Luminaires
ADB and ARRI have entered into a cross marketing agreement with the
double objective of exploiting the synergies between their product ranges
and exploring opportunities for rationalizing their product spectrum. ADB
is now able to offer the complete ARRI range of professional TV broadcast
and motion picture spotlights. In our catalogue we have presented only
a small segment of the ARRI product range – the complete selection of
ARRI products are available upon request. Please contact your ADB sales
partner for more information.
ADB's cool light SOFTLUX fluorescent fixtures are the economical solution
to modern studio lighting wherever conventional lighting is generating
prohibitive energy consumption and discomfort for the actors.
But not only specialised TV fixtures are used for studio lighting. Some of
our high quality profile spotlights have found their way into TV studios,
as for example in the spectacular circular lighting rig of the newest news
studio of TF1, France's leading commercial TV station, where 36 ADB
motorized WARP/M zoom profiles are installed.
With the increasing demand for sustainability and ecological solutions, ADB
has developed the ALC4, an LED RGB+W fixture which is not only highly
suitable for cyclorama lighting, but also for other TV lighting purposes
thanks to various accessories (see dedicated section).
64
Lighting Technologies
TV LIGHTING
Code TV Spotlights
Description
ARRI
The Top Quality Reference in Studio and Stage Lighting
Reference
A choice of 15 versions from 150 W to 5000 W for manual or pole operation.
SOFTLUX Cool Lights
The economical solution to modern Studio Lighting!
A choice of 4 basic versions, for manual or pole operation,
with 2, 4, 6 or 8 55 W fluorescent lamps, with 3000 K to
5600 K colour temperature.
65
Lighting Technologies
JUNIOR SERIES
TV Tungsten Fresnel Spotlights
ARRI JUNIOR 150
150 W
14° - 42°
Weight: 0.7 kg
ARRI JUNIOR 300
300 W
14° - 53°
Weight: 1.5 kg
ARRI JUNIOR 650
650 W
12° - 52°
Weight: 2.7 kg
ARRI JUNIOR is ideal, not only for small studios, but also for portable use.
The light weight and compact size makes it a universal tool for cramped conditions without compromising efficiency or lamp life.
The classic ARRI construction of strong and rust-resistant extruded and die cast aluminium makes the Junior ideal for outdoor use.
Main features:
• excellent optical performance
• high efficiency
• compact size
• robust construction
• easy operation
• easy service access
• wide range
• extensive accessories
Variants:
• 150 W in-line dimmer
• 150 W - 650 W with ERCO Track adapter
• P.O. versions of 650 W
• range of options and colours available
66
Lighting Technologies
TV Tungsten Fresnel Spotlights
for 150 / 300 / 650 W Halogen Lamps
Code
Description
Reference
JUNIOR Series
ARRI 150 blue/silver with switch
fresnel 150 W for GX6.35 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 50 mm
ARRI 300 blue/silver
fresnel 300 W for GY9.5 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 80 mm
ARRI 650 blue/silver
fresnel 650 W for GY9.5 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 112 mm
ARRI 650 blue/silver
fresnel 650 W for GY9.5 lampholder - PAN/TILT/FOCUS pole operation
with 4-leaf barndoor and filter frame, lens Ø 112 mm
ARRI/150
ARRI/300
ARRI/650
ARRI/650/PO
Halogen lamps 230 V : see relevant page
Accessories
4-leaf barndoor, black, 78 mm (ARRI/150)
4-leaf barndoor, black, 130 mm (ARRI/300)
4-leaf barndoor, black, 168 mm (ARRI/650)
8-leaf barndoor, black, 168 mm (ARRI/650)
Filter frame 78 mm (ARRI/150)
Filter frame 130 mm (ARRI/300)
Filter frame 168 mm (ARRI/650)
Set of 4 metal scrims, 78 mm / 3" (ARRI/150)
Set of 4 metal scrims, 130 mm / 5" (ARRI/300)
Set of 4 metal scrims, 168 mm/6 5/8" (ARRI/650)
ARRI/CF4/78
ARRI/CF4/130
ARRI/CF4/168
ARRI/CF8/168
ARRI/PFM/78
ARRI/PFM/130
ARRI/PFM/168
ARRI/KIT/AM/78
ARRI/KIT/AM/130
ARRI/KIT/AM/168
Other versions and accessories are available upon request
67
Lighting Technologies
True Blue SERIES
TV Tungsten Fresnel Spotlights
ARRI T1
1000 W Location Fresnel
Weight: 5.5 kg (manual) - 7.5 kg (pole operated)
ARRI ST1
1000 W Studio Fresnel
Weight: 7 kg (manual) - 8 kg (pole operated)
ARRI T2
2000 W Location Fresnel
Weight: 7 kg (manual) - 8 kg (pole operated)
ARRI ST2
2000 W Studio Fresnel
Weight: 10.5 kg (manual) - 11.5 kg (pole operated)
ARRI T5
5000 W Location Fresnel
Weight: 11.5 kg (manual)
ARRI ST5
5000 W Studio Fresnel
Weight: 13.5 kg (manual) - 15 kg (pole operated)
ARRI TRUE BLUE represent an unprecedented evolution of the location fixtures that have been
popular workhorses for over two decades. Following extensive research and feedback from lighting
professionals around the world, combined with advances in technology, ARRI has designed a series of
six highly innovative lampheads with over 30 new improvements for studio and location lighting.
Main features:
• Cross Cooling System: new, highly effective cooling streams in addition to conventional cooling
• Sliding Stirrup: centre of gravity adjustment
• Tilt Lock: stainless steel friction disc for rigid lock-off
• Top Latches: application-oriented Top Latches for location or studio use
• Adjustable Accessory Brackets: adjustable 2-scrim and 4-scrim position
• Stainless Steel Lens Protection: maximised light transmission and high temperature stability
• Extremely Robust Barndoors: made of special alloy with high strength-to-weight ratio and effective tightening function
• Maintenance: more shared parts, very fast access to all interior workings with three torx drivers only
• Improved Weather Protection / IP23: safe indoor and outdoor use
• Safety Certification: CE, TÜV-GS, NRTL-US-C
68
Lighting Technologies
TV Tungsten Fresnel Spotlights
for 1000 / 2000 / 5000 W Halogen Lamps
Code
Description
Reference
True Blue Series
ARRI True Blue T1 blue/silver
fresnel 1000 W for G22 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 150 mm
ARRI True Blue T1 blue/silver
fresnel 1000 W for G22 lampholder - PAN/TILT/FOCUS pole operation
with 4-leaf barndoor and filter frame, lens Ø 150 mm
ARRI True Blue T2 blue/silver
fresnel 2000 W for G38 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 175 mm
ARRI True Blue T2 blue/silver
fresnel 2000 W for G38 lampholder - PAN/TILT/FOCUS pole operation
with 4-leaf barndoor and filter frame, lens Ø 175 mm
ARRI True Blue T5 blue/silver
fresnel 5000 W for G38 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 250 mm
ARRI True Blue ST1 blue/silver
fresnel 1000 W for G22 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 175 mm
ARRI True Blue ST1 blue/silver
fresnel 1000 W for G22 lampholder - PAN/TILT/FOCUS pole operation
with 4-leaf barndoor and filter frame, lens Ø 175 mm
ARRI True Blue ST2 blue/silver
fresnel 2000 W for G38 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 250 mm
ARRI True Blue ST2 blue/silver
fresnel 2000 W for G38 lampholder - PAN/TILT/FOCUS pole operation
with 4-leaf barndoor and filter frame, lens Ø 250 mm
ARRI True Blue ST5 blue/silver
fresnel 5000 W for G38 lampholder - manually operated
with 4-leaf barndoor and filter frame, lens Ø 300 mm
ARRI True Blue ST5 blue/silver
fresnel 5000 W for G38 lampholder - PAN/TILT/FOCUS pole operation
with 4-leaf barndoor and filter frame, lens Ø 300 mm
ARRI/T1
ARRI/T1/PO
ARRI/T2
ARRI/T2/PO
ARRI/T5
ARRI/ST1
ARRI/ST1/PO
ARRI/ST2
ARRI/ST2/PO
ARRI/ST5
ARRI/ST5/PO
Halogen lamps 230 V : see relevant page
Accessories
4-leaf barndoor, True Blue, black, 197 mm (ARRI/T1)
4-leaf barndoor, True Blue, black, 245 mm (ARRI/T2 & ST1)
4-leaf barndoor, True Blue, black, 344 mm (ARRI/T5 & ST2)
4-leaf barndoor, True Blue, black, 413 mm (ST5)
8-leaf barndoor, True Blue, black, 197 mm (ARRI/T1)
8-leaf barndoor, True Blue, black, 245 mm (ARRI/T2 & ST1)
8-leaf barndoor, True Blue, black, 344 mm (ARRI/T5 & ST2)
8-leaf barndoor, True Blue, black, 413 mm (ST5)
Filter frame 197 mm (ARRI/T1)
Filter frame 230 mm (ARRI/T2 & ST1)
Filter frame 330 mm (ARRI/T5 & ST2)
Filter frame 400 mm (ST5)
Metal scrim set, 197 mm/7 3/4in, full double, half double, full single,
half single (ARRI/T1)
Metal scrim set, 230 mm/9", full double, half double, full single,
half single (ARRI/T2 & ST1)
Metal scrim set, 330 mm/13", full double, half double, full single,
half single (ARRI/T5 & ST2)
Metal scrim set, 400 mm/13", full double, half double, full single,
half single (ST5)
ARRI/CF4/197
ARRI/CF4/245
ARRI/CF4/344
ARRI/CF4/413
ARRI/CF8/197
ARRI/CF8/245
ARRI/CF8/344
ARRI/CF8/413
ARRI/PFM/197
ARRI/PFM/230
ARRI/PFM/330
ARRI/PFM/400
ARRI/KIT/AM197
ARRI/KIT/AM230
ARRI/KIT/AM330
ARRI/KIT/AM400
Other versions and accessories are available upon request
69
Lighting Technologies
LED SERIES
TV Focusable Fresnel Spotlights
ARRI L7-C
Colour Controllable Fresnel Spotlight
220 W
15° - 50°
Weight: 10.9 kg
ARRI L7-T
Tungsten Halogen CT - 3200K Fresnel
Spotlight
220 W
15° - 50°
Weight: 10.9 kg
The L7-C and L7-T are the first LED fixtures to truly incorporate Fresnel characteristics such as continuous focusability from spot
to flood and a smooth, homogenous light field. L stands for LED and 7 for the 7" Fresnel-like lens shared by both models. It is in
colour output that they differ: the L7-T is 3200 K (matching tungsten) while the L7-C is fully colour controllable, enabling correlated
colour temperature, green-magenta shift and RGBW colours to be set with ease.
Flattering, true-to-life colour rendition, previously achievable only with full-spectrum tungsten sources, is a hallmark feature of the
L-Series. The L7-T provides excellent reproduction of tungsten light, in both colour and quality.
The fully tuneable white light of the L7-C can be adjusted for different skin tones, camera sensors and mixed-light environments,
while specific colour shades can be matched through full gamut colour mixing. Unlike other LED fixtures, this level of colour
control does not involve compromising the quality of the light field: the L7 Fresnels are unique in combining uniform light and single
shadow rendition with absolute control of colour attributes.
70
Lighting Technologies
TV LED Fresnel Spotlights
for 220 W
Code
Description
Reference
LED Series
1020.26.110
ARRI L7-C Colour Controllable Fresnel Spotlight
ARRI/L7C
focusable fresnel 220 W - lens Ø 175 mm
1020.26.100
ARRI L7-T LED fresnel
ARRI/L7T
tungsten balanced 3200 K LED fresnel
The luminaires are supplied with:
• Onboard controller side panel
• Pole operated versions and versions without controller side
• Panel are available upon request
Accessories
8-leaf barndoor, True Blue, 197 mm
4-leaf barndoor, True Blue, 197 mm
Filter frame 197 mm
ARRI/CF8/197
ARRI/CF4/197
ARRI/PFM/197
Other versions are available upon request
71
Lighting Technologies
SOFTLUX
SOFTLUX cool lights are intended to provide cool running,
continuous lighting, with either Tungsten (3200 °K) or Daylight
(5200 °K - 5600 °K) balance, in Film and Studio applications.
They range from 110 W to 440 W in various combinations of
55 W fluorescent lamps.
SOFTLUX produces 300 % to 400 % more lumen per Watt than
conventional tungsten lamps resulting in less heat emission, less
power consumption, more comfort for the subject and a greatly
reduced HVAC cost.
SOFTLUX 110 W
SOFTLUX fluorescent lamps will last a minimum of 6000 h, 60
times longer than conventional tungsten or HMI lamps, without
degradation and loss of colour balance.
SOFTLUX dimming is through the DMX signal of a lighting
console, and/or a local potentiometer.
SOFTLUX combines a specially designed lamp/reflector unit
which gives a symmetrical, directional "punchy" light output
and allows longer throw or wider spread as required. The simple
attachment of a honeycomb screen allows local light control with
20°, 40° or 60° field angle.
SOFTLUX 220 W
SOFTLUX Linear Space Lights
SLW 220 & SLW 440, fitted with 2 or 4 pairs of 55 W lamps
mounted side by side with an integral, 4-leaf black barndoor and
optional eggcrate, are intended to produce a wide angular light
with relatively sharp edges for illuminating areas, walls, groups
of artists and even cyclorama.
SOFTLUX combines modern advances in fluorescent lamp
technology and electronic control to provide a powerful, flickerfree
light source, both flexible and easy to use.
SOFTLUX comes into a very rigid, lightweight aluminium body,
slim and rounded for maximum operational safety, with an elegant
finish in a dark grey semi-gloss paint. Other colours upon request.
SOFTLUX 330 W with honeycombs
SOFTLUX fixtures are supplied with:
- a 4-leaf reflective barndoor (SL types)
- a 4-leaf black barndoor (SLW types)
- a yoke with central hole Ø 11 mm for DIN Spigot,
BS4015 or standard hook clamp
- a 2 m power supply cable with open end.
Lamps are not included.
SOFTLUX 440 W
72
Lighting Technologies
SOFTLUX Cool Lights
110 / 220 / 330 / 440 W
Code
Description
Reference
SOFTLUX Cool Lights - Manual operation
1075.00.080
1075.00.090
1075.00.100
1075.00.105
with 4-leaf reflective barndoor, 2 m cable, without lamps
SOFTLUX 110W - 2 x 55W - 230V DMX/Local Control
SOFTLUX 220W - 4 x 55W - 230V DMX/Local Control
SOFTLUX 330W - 6 x 55W - 230V DMX/Local Control
SOFTLUX 440W - 8 x 55W - 230V DMX/Local Control
SL110/DMX/LC
SL220/DMX/LC
SL330/DMX/LC
SL440/DMX/LC
SOFTLUX Cool Lights - Pole operation
1075.01.080
1075.01.090
1075.01.100
1075.01.105
with 4-leaf reflective barndoor, 2 m cable, without lamps
SOFTLUX 110W - 2 x 55W - 230V DMX/Local Control
SOFTLUX 220W - 4 x 55W - 230V DMX/Local Control
SOFTLUX 330W - 6 x 55W - 230V DMX/Local Control
SOFTLUX 440W - 8 x 55W - 230V DMX/Local Control
SL110/DMX/LC/PO
SL220/DMX/LC/PO
SL330/DMX/LC/PO
SL440/DMX/LC/PO
SOFTLUX Linear Space Lights
1075.02.090
1075.02.105
with 4-leaf black barndoor, 2 m cable, without lamps
SOFTLUX 2 x 110W in line - 4 x 55W - 230V DMX/Local Control
SOFTLUX 4 x 110W in line - 8 x 55W - 230V DMX/Local Control
SLW220/DMX/LC
SLW440/DMX/LC
Dimensions
SL 110/DMX/LC: 645 x 230 x 605 mm - Net weight: 5 kg
SL 220/DMX/LC: 645 x 380 x 605 mm - Net weight: 7 kg
SL 330/DMX/LC: 645 x 530 x 605 mm - Net weight: 9 kg
SL 440/DMX/LC: 645 x 680 x 605 mm - Net weight: 11 kg
Accessories
1075.00.188
1075.00.198
1075.00.208
1075.00.408
1075.00.182
1075.00.184
, 1075.00.186
1075.00.192
1075.00.194
1075.00.196
1075.00.202
1075.00.204
1075.00.206
1075.00.402
1075.00.404
1075.00.405
1075.02.192
1075.02.194
1075.02.196
1075.02.402
1075 02 404
1075.02.406
Integral safety grid and colour frame for SL110
Integral safety grid and colour frame for SL220
Integral safety grid and colour frame for SL330
Integral safety grid and colour frame for SL440
Integral safety grid and colour frame for SLW220
Integral safety grid and colour frame for SLW440
Swivel arm for SL110 and SL220, including mounting bracket
20° Honeycombs for Softlux SL110
40° Honeycombs for Softlux SL110
60° Honeycombs for Softlux SL110
20° Honeycombs for Softlux SL220
40° Honeycombs for Softlux SL220
60° Honeycombs for Softlux SL220
20° Honeycombs for Softlux SL330
40° Honeycombs for Softlux SL330
60° Honeycombs for Softlux SL330
20° Honeycombs for Softlux SL440
40° Honeycombs for Softlux SL440
60° Honeycombs for Softlux SL440
20° Honeycombs for Softlux SLW220
40° Honeycombs for Softlux SLW220
60° Honeycombs for Softlux SLW220
20° Honeycombs for Softlux SLW440
40° Honeycombs for Softlux SLW440
60° Honeycombs for Softlux SLW440
SL110/SGCF
SL220/SGCF
SL330/SGCF
SL440/SGCF
SLW220/SGCF
SLW440/SGCF
SWIVARM110/220
SL110/H20
SL110/H40
SL110/H60
SL220/H20
SL220/H40
SL220/H60
SL330/H20
SL330/H40
SL330/H60
SL440/H20
SL440/H40
SL440/H60
SLW220/DMX/H20
SLW220/DMX/H40
SLW220/DMX/H60
SLW440/DMX/H20
SLW440/DMX/H40
SLW440/DMX/H60
Fluorescent Lamps 230 V: see relevant page
73
Lighting Technologies
Rigging Systems & Studio Design
As rigging equipment accounts for a major part of the lighting system
in a broadcast studio, ADB has developed a new generation of high
performance, cost effective products, and is able to propose customized
solutions which will meet any specific requirement.
I.S.S ADB’s proprietary Intelligent Safety System, represents a unique,
state-of-the-art approach to suspension safety. I.S.S. first measures the
initial load (the reference) automatically before starting up, then monitors in
real time any variation from the reference, and eventually stops the hoist if
the variation exceeds a certain value as determined by the sensitivity level.
ADB's project department is at your service for the study, the concept and
execution of any TV studio lighting & suspension system.
74
Lighting Technologies
RIGGING
Track & Barrel Systems
Small studios may well function with a simple grid work of pipes or trusses suspended from the ceiling. The diameter of the pipes
is typically 1.5 inch or approx. 38 mm.
This will work fine if the lighting structure of the studio stays more or less the same day-in day-out.
But for studios with low ceilings (between 4 and 6 m net height) with frequent changes, it is economical to invest in a simple but
very effective mechanical solution – The Track and Barrel system.
It consists of lighting bars mounted on trolleys, which travel in a track system across the studio ceiling. (It is important to provide
enough space above the tracks so that ventilation ducts, cable trays and other equipment can be fitted in.) The new Track and
Barrel system has been proven to be extremely economical and flexible for use:
•
Track and Barrel is based on Industrial components
•
Easy to assemble on site
•
The barrels are completely prewired, which means that there is:
- Consistency in outlet numbering
- Full coverage of the complete studio with a minimum amount of circuits
•
Every outlet is permanently wired to either a dimmer or a direct outlet
(Even greater flexibility can be achieved with the ADB EURODIM Twin Tech DimSwitch modules)
•
Every data/DMX connection is permanently wired to a data patch bay
•
Any suspended luminaire can be “pole operated” and move in 3 directions
(LEFT <-> RIGHT, FORWARD <-> BACKWARD, UP <-> DOWN (by pantograph)
75
Lighting Technologies
Motorized Hoists
ADB offers a very broad choice of motorized hoisting solutions for TV studios with a grid height up to 15 m.
Standard products include self-climbing hoists with pile-up or drum winding, with either ADB proprietary Intelligent Safety System
(I.S.S.) or conventional no-load / overload mechanical system. Customized solutions are possible as well.
Self-Climbing Hoists with Pile-up Winding
ECONOMIC
INTELLIGENT
PWS-1
PWS-2
Maximum travel: 11 m
Safe working load: 120 kg
Average travel speed: 5.5 m / min.
Maximum travel: 11 m
Safe working load: 120 kg
Average travel speed: 5.5m / min.
Mechanical No-Load / Overload safety system
I.S.S. Intelligent Safety System (*)
Top box for the connection of all electrical wiring to the hoist
Top & bottom travel limit switches + safety over-travel limit
switches
Top box for the connection of all electrical wiring to the hoist
Top & bottom travel limit switches + safety over-travel limit
switches
MotoVario motor-gearbox tri-phase 0.55 kW
SEW Frequency converter for Soft start / Soft stop
MotoVario motor-gearbox tri-phase 0.55 kW
SEW intelligent Frequency converter for I.S.S. + Soft start /
Soft stop
4 steel wires diam. 3.2 mm
Standard body: 2 m
4 steel wires diam. 3.2 mm
Standard body: 2 m
(*) I.S.S. system includes:
•
2 sensor elements.
•
2 sensor connection cables, 2.5 m long with connection to the intelligent frequency converter.
•
1 Top Box including terminal block for all electrical connections to the flexible multi-cables + incoming wiring.
76
Lighting Technologies
Hoists
Motorized Hoists with Drum Winding
ECONOMIC
INTELLIGENT
HIGH SPEC
DWS-1
DWS-2
DWS-3
Self-climbing hoist
Self-climbing hoist
Maximum travel: 11 m
Safe working load: 120 kg
Travel speed: constant 7 m / min.
Maximum travel: 11 m
Safe working load: 120 kg
Travel speed: constant 7 m / min.
Motorized hoist, for under-grid or overgrid installation and heavy duty
Maximum travel: 15 m
Safe working load: 160 kg
Travel speed: constant 7 m / min.
Mechanical No-Load / Overload safety
system
I.S.S. Intelligent Safety System (*)
Mechanical No-Load / Overload safety
system or I.S.S. (option)
Top box for the connection of all
electrical wiring to the hoist system
Top & bottom travel limit switches +
safety over-travel limit switches
Top box for the connection of all electrical
wiring to the hoist system.
Top & bottom travel limit switches +
safety over-travel limit switches
Top box for the connection of all
electrical wiring to the hoist system
Top & bottom travel limit switches +
safety over-travel limit switches
SEW motor-gearbox tri-phase 0.37 kW
SEW Frequency converter for Soft start
/ Soft stop
SEW motor-gearbox tri-phase 0.37 kW
SEW intelligent Frequency converter for
I.S.S. + Soft start / Soft stop
SEW motor-gearbox tri-phase 0.55 kW
SEW Frequency converter for Soft start
/ Soft stop
4 steel wires diam. 4 mm
Standard body: 2 m
4 steel wires diam. 3.2 mm
Standard body: 2 m
4 steel wires diam. 4 mm
Standard body: 2.2 m
77
Lighting Technologies
Code
Description
Reference
Accessories
ADB supplies not only professional luminaires but also a range of
accessories and ancillary equipment. As a one stop shop the best selection
of lamps can be supplied with your luminaires. Now is that not easy?
Lamps
Fluorescent lamps
Halogen Lamps
HMI Lamps
Metal Halide Lamps
Spotlight Accessories
78
Lighting Technologies
Lamps
Code
Description
Reference
2990.40.500
2990.40.505
G 9.5 Biplane Filament Halogen Lamps (for WARP)
230 V
800 W 3200 K
300 h
BP
230 V
600 W 3200K
300 h
BP
800W/G9.5/3200K
600W/G9.5/3200K
2990.40.205
2990.40.300
2990.40.305
2990.40.310
2990.40.458
GY 9.5 Halogen Lamps (for EUROSPOT / "A" Range)
230 V
300 W 2800 K 2000 h
M
230 V
500 W 3200 K
150 h
MP
230 V
500 W 3050 K
400 h
BP
230 V
500 W 2900 K 2000 h
M
230 V
650 W 3050 K
400 h
M
300W/GY9.5/2800K
500W/GY9.5/3200K
500W/GY9.5/3050K
500W/GY9.5/2900K
650W/GY9.5/3050K
2990.40.470
2990.40.456
2990.40.603
2990.40.600
2990.40.625
GX 9.5 Halogen Lamps (for EUROPE / TV)
230 V
650 W 3000 K
230 V
650 W 3200 K
230 V
1000 W 3050 K
230 V
1000W
3200K
230 V
1200W
3200K
750 h
100 h
750 h
200 h
200 h
BP
BP
BP
BP
BP
650W/GX9.5/3000K
650W/GX9.5/3200K
1000W/GX9.5/3050K
1000W/GX9.5/3200K
1200W/GX9.5/3200K
2990.40.800
GY 16 Halogen Lamp (for EUROPE / TV)
230 V
2000 W 3200 K
400 h
BP
2000W/GY16/3200K
2990.40.460
2990.40.610
2990.40.803
2990.40.618
G 22 Halogen Lamps (for TV)
230 V
650 W
230 V
1000 W
230 V
2000 W
230 V
2500 W
3200 K
3200 K
3200 K
3200 K
100 h
200 h
400 h
400 h
BP
BP
BP
BP
650W/G22/3200K
1000W/G22/3200K
2000W/G22/3200K
2500W/G22/3200K
2990.40.805
2990.42.805
G 38 Halogen Lamps (for TV)
230 V
2000 W
230 V
5000 W
3200 K
3200 K
400 h
400 h
BP
BP
2000W/G38/3200K
5000W/G38/3200K
2990.45.340
2990.45.400
2990.45.405
2990.45.450
R7S Halogen Lamps (for TV Soft & Fill Lights)
230 V
625 W 3200 K
200 h
230 V
1000 W 3000 K 2000 h
230 V
1000 W 3200 K
200 h
230 V
1250 W 3200 K
200 h
625W/R7S/3200K
1000W/R7S/3000K
1000W/R7S/3200K
1250W/R7S/3200K
2990.18.230
E40 Halogen Lamp (for SVOBODA)
24 V
250 W mirrored
M.E40.250
2990.40.510
2990.40.515
2990.40.516
2990.40.517
G22 Metal Halide Lamps (for WARP/DL)
575 W 6000 K 1000 h
575 W 6000 K 2000 h
575 W 6000 K
750 h
575 W 6000 K 1000 h
49,000 lm
46,000 lm
49,000 lm
49,000 lm
MSR/575/HR
MSD/575/HR
HMI/575/SE
HMI/575/SEL
2990.40.508
GX9.5 Metal Halide Lamp (for WARP/DL/Rental)
575 W 7200 K 1000 h
49,000 lm
MSR/575/2
2990.26.500
GX6.35 Halogen Lamp (for ARRI 150 W luminaire)
230 V
150 W
3000 K
150W/GX6.35/3000K
2990.18.553
2990.18.554
2990.18.551
2990.18.550
230 V Fluorescent Lamps (for SOFTLUX Cool Lights)
DULUX/L
55 W
3000 K 3000 lm
DULUX/L
55 W
5400 K 3000 lm
STUDIOLINE
55 W
3200 K 3800 lm
STUDIOLINE
55 W
5600 K 3800 lm
DULL/55W/930
DULL/55W/954
STUD/55W/32
STUD/55W/56
Note:
STUDIOLINE lamps feature an excellent colour stability and a perfect
compatibility with halogen and HMI sources.
79
Lighting Technologies
Spotlight Accessories
Code
Description
Reference
Gobo Holders
1000.40.045
1000.40.065
1000.40.080
1000.40.090
1000.40.100
1000.40.120
SP/GO/EURO
For gobo type M for EUROSPOT
Double for gobo type M for A59Z
For gobo type A (Ø 100) with retention ring for EUROPE
For gobo type B (Ø 85) for EUROPE
Double gobo holder for WARP (rotating) type B
Single gobo holder for WARP (non rotating) type B
SP/A650
SP-GO/A
SP-GO/B
SP/GO/EURO
SP/A650
SP-GO/A
SP-GO/B
SP/2GO/WARP
SP-GO/WARP
SP/2GO/WARP
SP-GO/WARP
Iris Diaphragms
1000.19.645
1000.19.200
1000.19.531
1000.19.631
1000.19.541
1000.40.110
OR/A650
Iris Diaphragm for DS/DW 54 spotlights
Iris Diaphragm for A59 Z spotlight
Iris Diaphragm Ø 75 for EUROPE range
Iris Diaphragm Ø 80 for EUROPE range
Iris Diaphragm Ø 80 with black-out for EUROPE range
Combined iris and gobo holder for WARP (rotating) type B
OR/75
OR/80
OR/80/BO
OR/EURO
OR/A650
OR/75
OR/80
OR/80/BO
SP/OR-GO/WARP
SP/OR-GO/WARP
80
Lighting Technologies
Spotlight Accessories
Code
Description
Reference
General Accessories
1092.15.110
1092.10.505
1092.10.950
1192.10.550
1192.10.560
1092.10.550
1092.10.600
1015.02.200
1015.02.210
1092.00.092
1092.00.094
Low stand with Ø 4 x 11 mm assembly holes and M10 fixing nut
Hook clamp for Ø 21 to 48 mm tubes, with M10 tapped hole and
M10 x 45 wing screw
Hook clamp for Ø 34 to 60 mm tubes with DIN spigot adapter
Hook clamp for Ø 35 to 50 mm tubes, equipped with one
M10 x 45 welded screw and one M10 wing nut
Hook clamp for Ø 35 to 50 mm tubes, with M10 tapped hole and
M10 x 35 wing screw
Hook clamp for Ø 45 to 60 mm tubes, with M10 tapped hole and
M10 x 35 wing screw
Hook clamp for Ø 48 to 51 mm tubes, with clamping collar
for WARP/M (2 required)
Hook clamp for Ø 32 to 52 mm tubes
Hook clamp for Ø 50 to 82 mm tubes
S2
A6
A8
A20
A25
A30
A40
RC50
RC80
1092.00.093
1.2 m spotlight safety cable
0.75 m safety cable for CFN/185, CFN/245, CF/S10 and
CF/S20 barndoors
1 m safety cable for CF/S50 barndoor
CAS/CF/75
CAS/CF/100
1092.20.315
1092.20.601
DIN spigot
DIN spigot adapter
PIVOT DIN
DOUILLE DIN
S2
A25
PIVOT DIN
A6
A8
A30
A40
CAS120/N
A20
RC 50/ RC 80
DOUILLE DIN
81
Lighting Technologies
Code
Description
Reference
82
Lighting Technologies
Your Partner for Light
Lighting Technologies
Belgium N.V. ADB-TTV Technologies S.A.
Group Headquarters
Leuvensesteenweg 585
B-1930 Zaventem
Tel: +32 (0)2.709.32.11
Fax: +32 (0)2.709.32.80
E-Mail: [email protected]
France ADB S.A.S.
Sales Office
92, Avenue Jean Jaurès
F-92120 Montrouge
Tel: +33 (0)1.41.17.48.50
Fax: +33 (0)1.42.53.54.76
E-Mail: [email protected]
France ADB S.A.S.
Factory & Group Logistics Centre
Zone industrielle Rouvroy
F-02100 Saint-Quentin
Tel: +33 (0)3.23.06.35.70
Fax: +33 (0)3.23.67.66.56
E-Mail: [email protected]
www.adblighting.com
Hong Kong ADB Lighting Asia Ltd
Suite 2414,
Level 24,
Two Pacific Place, 88
Queensway
Tel: +852.903.232.27
E-Mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement