Digiplex | EVO641R | Installation manual | Digiplex EVO641R Installation manual

High Security and Access System
EVO48 V1.2
EVO192 V1.2
Programming Guide
Includes LCD Keypad
Programming
We hope this product performs to your complete satisfaction. Should you have any
questions or comments, please visit www.paradox.com and send us your comments.
New Remote Control Programming
Hardware Requirements
If the EVO48 System Includes:
Up to 96 remote controls can now be programmed into the EVO control panel and configured
using a master code or installer code.
See “Remote Control Programming” on page 35.
MG-RTX3 Wireless Expansion Module
And
EVO641 / EVO641R keypad
If the EVO192 System Includes:
Up to 999 remote controls can now be programmed into the EVO control panel and configured
using a master code or installer code.
See “Remote Control Programming” on page 35.
MG-RTX3 Wireless Expansion Module
And:
EVO641 / EVO641R keypad
If the System Includes:
MG-RTX3 Wireless Expansion Module
But does not include:
EVO641 / EVO641R keypad
Remote controls must be stored in the wireless expansion module (32 remotes per MG-RTX3).
See “SECTION [3029] : System Options 1” on page 36.
Hardware Differences
The programming for the EVO48 and EVO192 panels is identical. However, certain differences may affect how many elements can be programmed.
Feature
EVO48
EVO192
Zones
48
192
Partitions
4
8
Users
96
999
On-board PGMs
2 (with 2 optional PGM output and 1
optional relay)
5 (4 PGM outputs and 1 relay)
Modules
127
254
Digiplex -EVO-
-2-
Programming Guide
Table of Contents
Dialer Options .............................................................. 38
Other Options .............................................................. 38
Communication Settings .............................................. 39
System Event Call Direction ........................................ 40
VDMP3 Voice Module .................................................. 41
Partition Settings .......................................................... 42
Special and Trouble Report Codes .............................. 48
Other Settings and Modes ........................................... 49
Control Panel Hardware Connections ......................... 55
LCD Keypad Programming .......................................... 60
Trouble Display ............................................................ 68
Zone Programming ....................................................... 9
Zone Information ......................................................... 10
Keyswitch Programming ............................................. 19
Programmable Outputs ............................................... 21
User Code Options ...................................................... 29
Arming and Disarming Report Codes ......................... 30
Access Control Sections ............................................. 31
Keypad Numbering ..................................................... 35
Remote Control Programming .................................... 35
Control Panel Settings ................................................ 36
System Options ........................................................... 36
Warning or important information.
Suggestion or reminder.
Things You Should Know
About This Programming Guide
This programming guide should be used in conjunction with the EVO Reference & Installation Manual which can be downloaded from our website at
paradox.com. Use this guide to record the settings programmed for this console.
Installer Code (Default: 000000)
The Installer code is used to enter programming mode, which allows you to program all the features, options and commands of the EVO except user codes.
To modify the installer code, refer to section [1000], Installer Code Programming on page 28.
System Master Code (Default: 1234 / 123456)
With the System Master code a user can use any arming method and can program user codes. The System Master code can be 4 or 6 digits in length.
Panel and Codes Reset
To reset the system back to the factory defaults or custom defaults (if they have been programmed), press and hold the Reset button and the Aux button for
4 seconds (See “PCB Layout” on page 65.)
Entering Programming Mode
1)
2)
3)
4)
Press and hold the [0] key
Enter your [installer code]
Enter 4-digit [section] you wish to program
Enter required [data]
Decimal and Hexadecimal Programming Table
Certain sections may require the entry of one or more Hexadecimal values from 0 to F.
For LCD keypads:
Key
[0] to [9]
Value or Action
Key
Value or Action
[BYP]
0 to 9 (Hex & Decimal)
E (Hex Only)
[STAY]
A (Hex Only)
[MEM]
[FORCE]
B (Hex Only)
[CLEAR]
Exit section without saving (Hex & Decimal)
F (Hex Only)
[ARM]
C (Hex Only)
[ENTER]
Save current data and advance to next section (Hex Only)
[DISARM]
D (Hex Only)
For Grafica keypads:
[0] to [9]
[#]
= values 0 to 9 respectively
= A to F (press the [#] key until the
desired letter appears)
Right Action Key (Exit)
Center Action Key (Save)
Digiplex -EVO-
-3-
= Exit section without saving
= Save current data and advance to next
section
Programming Guide
Serial Number List
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
1:______________________________________ 13:_____________________________________ 25:_____________________________________ 37:_____________________________________
2:______________________________________ 14:_____________________________________ 26:_____________________________________ 38:_____________________________________
3:______________________________________ 15:_____________________________________ 27:_____________________________________ 39:_____________________________________
Digiplex -EVO-
4:______________________________________ 16:_____________________________________ 28:_____________________________________ 40:_____________________________________
5:______________________________________ 17:_____________________________________ 29:_____________________________________ 41:_____________________________________
-46:______________________________________ 18:_____________________________________ 30:_____________________________________ 42:_____________________________________
Programming Guide
7:______________________________________ 19:_____________________________________ 31:_____________________________________ 43:_____________________________________
8:______________________________________ 20:_____________________________________ 32:_____________________________________ 44:_____________________________________
9:______________________________________ 21:_____________________________________ 33:_____________________________________ 45:_____________________________________
10:_____________________________________ 22:_____________________________________ 34:_____________________________________ 46:_____________________________________
11:_____________________________________ 23:_____________________________________ 35:_____________________________________ 47:_____________________________________
12:_____________________________________ 24:_____________________________________ 36:_____________________________________ 48:_____________________________________
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
49:_____________________________________ 62:_____________________________________ 75:_____________________________________ 88:_____________________________________
50:_____________________________________ 63:_____________________________________ 76:_____________________________________ 89:_____________________________________
51:_____________________________________ 64:_____________________________________ 77:_____________________________________ 90:____________________________________
Digiplex -EVO-
52:_____________________________________ 65:_____________________________________ 78:_____________________________________ 91:____________________________________
-5-
54:_____________________________________ 67:_____________________________________ 80:_____________________________________ 93:____________________________________
53:_____________________________________ 66:_____________________________________ 79:_____________________________________ 92:____________________________________
Programming Guide
55:_____________________________________ 68:_____________________________________ 81:_____________________________________ 94:____________________________________
56:_____________________________________ 69:_____________________________________ 82:_____________________________________ 95:____________________________________
57:_____________________________________ 70:_____________________________________ 83:_____________________________________ 96:____________________________________
58:_____________________________________ 71:_____________________________________ 84:____________________________________ 97:____________________________________
59:_____________________________________ 72:_____________________________________ 85:____________________________________ 98:____________________________________
60:_____________________________________ 73:_____________________________________ 86:____________________________________ 99:____________________________________
61:_____________________________________ 74:_____________________________________ 87:____________________________________ 100:____________________________________
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
101:____________________________________ 114:____________________________________ 127:____________________________________ 140:____________________________________
102:____________________________________ 115:____________________________________ 128:____________________________________ 141:____________________________________
103:____________________________________ 116:____________________________________ 129:____________________________________ 142:___________________________________
Digiplex -EVO-
104:____________________________________ 117:____________________________________ 130:____________________________________ 143:___________________________________
-6-
106:____________________________________ 119:____________________________________ 132:____________________________________ 145:___________________________________
105:____________________________________ 118:____________________________________ 131:____________________________________ 144:___________________________________
Programming Guide
107:____________________________________ 120:____________________________________ 133:____________________________________ 146:___________________________________
108:____________________________________ 121:____________________________________ 134:____________________________________ 147:___________________________________
109:____________________________________ 122:____________________________________ 135:____________________________________ 148:___________________________________
110:____________________________________ 123:____________________________________ 136:___________________________________ 149:___________________________________
111:____________________________________ 124:____________________________________ 137:___________________________________ 150:___________________________________
112:____________________________________ 125:____________________________________ 138:___________________________________ 151:___________________________________
113:____________________________________ 126:____________________________________ 139:___________________________________ 152:___________________________________
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
153:____________________________________ 166:____________________________________ 179:____________________________________ 192:____________________________________
154:____________________________________ 167:____________________________________ 180:____________________________________ 193:____________________________________
155:____________________________________ 168:____________________________________ 181:____________________________________ 194:___________________________________
Digiplex -EVO-
156:____________________________________ 169:____________________________________ 182:____________________________________ 195:___________________________________
-7-
158:____________________________________ 171:____________________________________ 184:____________________________________ 197:___________________________________
157:____________________________________ 170:____________________________________ 183:____________________________________ 196:___________________________________
Programming Guide
159:____________________________________ 172:____________________________________ 185:____________________________________ 198:___________________________________
160:____________________________________ 173:____________________________________ 186:____________________________________ 199:___________________________________
161:____________________________________ 174:____________________________________ 187:____________________________________ 200:___________________________________
162:____________________________________ 175:____________________________________ 188:___________________________________ 201:___________________________________
163:____________________________________ 176:____________________________________ 189:___________________________________ 202:___________________________________
164:____________________________________ 177:____________________________________ 190:___________________________________ 203:___________________________________
165:____________________________________ 178:____________________________________ 191:___________________________________ 204:___________________________________
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
Module Type, Serial Number & Details
205:____________________________________ 218:____________________________________ 231:____________________________________ 244:____________________________________
206:____________________________________ 219:____________________________________ 232:____________________________________ 245:____________________________________
207:____________________________________ 220:____________________________________ 233:____________________________________ 246:___________________________________
Digiplex -EVO-
208:____________________________________ 221:____________________________________ 234:____________________________________ 247:___________________________________
-8-
210:____________________________________ 223:____________________________________ 236:____________________________________ 249:___________________________________
209:____________________________________ 222:____________________________________ 235:____________________________________ 248:___________________________________
Programming Guide
211:____________________________________ 224:____________________________________ 237:____________________________________ 250:___________________________________
212:____________________________________ 225:____________________________________ 238:____________________________________ 251:___________________________________
213:____________________________________ 226:____________________________________ 239:____________________________________ 252:___________________________________
214:____________________________________ 227:____________________________________ 240:___________________________________ 253:___________________________________
215:____________________________________ 228:____________________________________ 241:___________________________________ 254:___________________________________
216:____________________________________ 229:____________________________________ 242:___________________________________
217:____________________________________ 230:____________________________________ 243:___________________________________
Zone Programming
Section [0400] is accessible only when using EVO641 and EVO641R keypads. Without section [0400], you can only program the
first 96 zones of the system using sections [0001] to [0096] for the zone’s serial number and input, sections [0101] to [0196] for
zone parameters, sections [0201] to [0296] for report codes and sections [0301] to [0396] for zone labels. In addition, with a
EVO48 panel, you can only program the first 48 zones with or without section [0400].
In any Zone Programming option, pressing [ACC] will save the data and go
to the next zone on the same option screen. Pressing [TRBL] will save the
data and go to the previous zone on the same option screen.
Enter Section [0400], then
enter the number of the
zone you want to program
Hardwired
Device A
Control Panel
SN#:020000A2
Enter the zone’s 8-digit
serial and 3-digit input
number (The input number
is not needed for module
with only one input)
Press [0] followed by [Enter]
to clear a zone’s serial
number.
Enter the zone’s parameters
(01) (*2*4***) default
Enter the zone’s report
codes
(00) (00) (00) (00) default
Keypad
SN#: 1A000252
Keypad Zone
2
COMMUNICATION
CombusNETWORK
7
8
Input 2
1
Input Terminals
3 4 5 6
Detector A
SN#: 21000033
Hardwired
Device B
Detector A:
Hardwired Device A:
Hardwired Device B:
Hardwired Device C:
APR3-ZX8 Module
SN#: 34000041
1
2
Input Terminals
3 4 5 6
Zone#
1=
2=
3=
4=
7
Section#
[0001]
[0002]
[0003]
[0004]
Input 5
Hardwired
Device C
Serial#
21000033
1A000252
020000A2
34000041
Input#
N/A
N/A
002
005
8
Zone Definition
Partition
Zone Option
_____
_____
12345678
0 - Disabled (default)
1 - Entry Delay 1
2 - Entry Delay 2
3 - Follow
4 - Instant
5 - 24Hr Buzzer
6 - 24Hr Burglary
7 - 24Hr Hold-up
8 - 24Hr Gas
9 - 24Hr Heat
A - 24Hr Water
B - 24Hr Freeze
C - Delayed 24Hr Fire
D - Standard 24Hr Fire
E - Stay Delay 1
F - Stay Delay 2
1 - Assigned to Partition 1
(default)
2 - Assigned to Partition 2
3 - Assigned to Partition 3
4 - Assigned to Partition 4
5 - Assigned to Partition 5
6 - Assigned to Partition 6
7 - Assigned to Partition 7
8 - Assigned to Partition 8
[1] Auto Zone Shutdown Enabled
[2] Bypass Enabled (default on)
[3] Stay Zone
[4] Force Zone (default on)
[5]
[6]
Zone Alarm Type
off
off
Steady Alarm
off
on
Pulsed Alarm
on
off
Silent Alarm
on
on
Report Only
[7] Intellizone
[8] Delay before Transmission
.
Alarm Report Code
Enter the zone’s label
__ / __
Alarm Restore
Report Code
__ / __
Tamper Report
Code
__ / __
Tamper Restore
Report Code
__ / __
Ademco slow, Silent Knight fast, SESCOA, Ademco express or Pager formats:
Key-in desired 2-digit hex values from 00 to FF.
Press [ENTER] to save and
go to the next zone
Ademco format:
Use section [4032] to program a set of default Ademco report codes from the
Automatic Report Code Programming on page 50. Then to program the remaining
report codes or to change some of the defaults, enter the individual sections and
key-in the desired 2-digit hex value found in the Contact ID Report Code List on
page 53.
SIA format:
Use section [4032] to program a set of SIA report codes from the Automatic Report
Code Programming on page 50. Codes that have not been set to default can be set
to default manually by entering FF in the appropriate section. To disable the
reporting of an event, enter 00 in the appropriate section
Pressing [CLEAR] twice will
exit the zone programming
menus. Press [ENTER]
before pressing clear to
save your modifications.
Digiplex -EVO-
-9-
Programming Guide
Zone Information
Zone Programming
Digiplex -EVO- 10 Programming Guide
Zone
1
__________________________________________ _______________
Description
Module
___/___/___/___/___/___/___/___
8-digit Serial Number
___/___/___
Input#
2
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
3
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
4
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
5
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
6
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
7
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
8
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
9
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
10
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
11
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
12
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
13
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
14
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
15
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
16
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
17
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
18
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
19
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
20
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
21
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
22
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
23
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
24
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
25
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
26
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
27
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
28
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
29
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
30
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
31
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
32
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
33
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
34
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
35
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
36
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
37
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Zone Options
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Digiplex -EVO- 11 Programming Guide
Zone
38
__________________________________________ _______________
Description
Module
___/___/___/___/___/___/___/___
___/___/___
39
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
40
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
41
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
42
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
43
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
44
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
45
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
46
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
47
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
48
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
49
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
50
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
51
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
52
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
53
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
54
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
55
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
56
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
57
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
58
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
59
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
60
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
61
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
62
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
63
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
64
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
65
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
66
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
67
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
68
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
69
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
70
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
71
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
72
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
73
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
74
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
75
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
76
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
77
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
78
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
8-digit Serial Number
Input#
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Zone Options
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Digiplex -EVO- 12 Programming Guide
Zone
79
__________________________________________ _______________
Description
Module
___/___/___/___/___/___/___/___
___/___/___
80
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
81
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
82
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
83
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
84
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
85
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
86
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
87
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
88
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
89
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
90
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
91
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
92
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
93
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
94
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
95
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
96
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
97
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
98
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
99
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
100
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
101
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
102
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
103
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
104
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
105
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
106
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
107
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
108
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
109
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
110
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
111
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
112
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
113
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
114
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
115
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
116
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
117
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
118
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
119
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
8-digit Serial Number
Input#
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Zone Options
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Digiplex -EVO- 13 Programming Guide
Zone
120
__________________________________________ _______________
Description
Module
___/___/___/___/___/___/___/___
___/___/___
121
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
122
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
123
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
124
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
125
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
126
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
127
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
128
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
129
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
130
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
131
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
132
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
133
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
134
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
135
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
136
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
137
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
138
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
139
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
140
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
141
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
142
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
143
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
144
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
145
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
146
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
147
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
148
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
149
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
150
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
151
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
152
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
153
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
154
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
155
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
156
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
157
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
158
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
159
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
160
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
8-digit Serial Number
Input#
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Zone Options
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Description
Module
8-digit Serial Number
Input#
Digiplex -EVO- 14 Programming Guide
Zone
161
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
162
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
163
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
164
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
165
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
166
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
167
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
168
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
169
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
170
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
171
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
172
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
173
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
174
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
175
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
176
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
177
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
178
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
179
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
180
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
181
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
182
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
183
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
184
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
185
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
186
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
187
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
188
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
189
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
190
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
191
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
192
__________________________________________ _______________
___/___/___/___/___/___/___/___
___/___/___
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Zone Options
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Zone report codes
Zone #
Alarm Report
Codes
Alarm Restore
Report Codes
Tamper Report
Codes
Tamper Restore
Report Codes
Zone #
Alarm Report
Codes
Alarm Restore
Report Codes
Tamper Report
Codes
Tamper Restore
Report Codes
1
__/__
__/__
__/__
__/__
43
__/__
__/__
__/__
__/__
2
__/__
__/__
__/__
__/__
44
__/__
__/__
__/__
__/__
3
__/__
__/__
__/__
__/__
45
__/__
__/__
__/__
__/__
4
__/__
__/__
__/__
__/__
46
__/__
__/__
__/__
__/__
5
__/__
__/__
__/__
__/__
47
__/__
__/__
__/__
__/__
6
__/__
__/__
__/__
__/__
48
__/__
__/__
__/__
__/__
7
__/__
__/__
__/__
__/__
49
__/__
__/__
__/__
__/__
8
__/__
__/__
__/__
__/__
50
__/__
__/__
__/__
__/__
9
__/__
__/__
__/__
__/__
51
__/__
__/__
__/__
__/__
10
__/__
__/__
__/__
__/__
52
__/__
__/__
__/__
__/__
Digiplex -EVO-
11
__/__
__/__
__/__
__/__
53
__/__
__/__
__/__
__/__
12
__/__
__/__
__/__
__/__
54
__/__
__/__
__/__
__/__
13
__/__
__/__
__/__
__/__
55
__/__
__/__
__/__
__/__
14
__/__
__/__
__/__
__/__
56
__/__
__/__
__/__
__/__
15
__/__
__/__
__/__
__/__
57
__/__
__/__
__/__
__/__
16
__/__
__/__
__/__
__/__
58
__/__
__/__
__/__
__/__
- 15 -
17
__/__
__/__
__/__
__/__
59
__/__
__/__
__/__
__/__
18
__/__
__/__
__/__
__/__
60
__/__
__/__
__/__
__/__
19
__/__
__/__
__/__
__/__
61
__/__
__/__
__/__
__/__
20
__/__
__/__
__/__
__/__
62
__/__
__/__
__/__
__/__
__/__
Programming Guide
21
__/__
__/__
__/__
__/__
__/__
63
64
__/__
__/__
__/__
__/__
__/__
__/__
22
__/__
__/__
__/__
__/__
23
__/__
__/__
__/__
__/__
65
__/__
__/__
__/__
__/__
24
__/__
__/__
__/__
__/__
66
__/__
__/__
__/__
__/__
25
__/__
__/__
__/__
__/__
67
__/__
__/__
__/__
__/__
26
__/__
__/__
__/__
__/__
68
__/__
__/__
__/__
__/__
27
__/__
__/__
__/__
__/__
69
__/__
__/__
__/__
__/__
28
__/__
__/__
__/__
__/__
70
__/__
__/__
__/__
__/__
29
__/__
__/__
__/__
__/__
71
__/__
__/__
__/__
__/__
30
__/__
__/__
__/__
__/__
72
__/__
__/__
__/__
__/__
31
__/__
__/__
__/__
__/__
73
__/__
__/__
__/__
__/__
32
__/__
__/__
__/__
__/__
74
__/__
__/__
__/__
__/__
33
__/__
__/__
__/__
__/__
75
__/__
__/__
__/__
__/__
34
__/__
__/__
__/__
__/__
76
__/__
__/__
__/__
__/__
35
__/__
__/__
__/__
__/__
77
__/__
__/__
__/__
__/__
36
__/__
__/__
__/__
__/__
78
__/__
__/__
__/__
__/__
37
__/__
__/__
__/__
__/__
79
__/__
__/__
__/__
__/__
38
__/__
__/__
__/__
__/__
80
__/__
__/__
__/__
__/__
39
__/__
__/__
__/__
__/__
81
__/__
__/__
__/__
__/__
40
__/__
__/__
__/__
__/__
82
__/__
__/__
__/__
__/__
41
__/__
__/__
__/__
__/__
83
__/__
__/__
__/__
__/__
42
__/__
__/__
__/__
__/__
84
__/__
__/__
__/__
__/__
85
__/__
__/__
__/__
__/__
130
__/__
__/__
__/__
__/__
86
__/__
__/__
__/__
__/__
131
__/__
__/__
__/__
__/__
87
__/__
__/__
__/__
__/__
132
__/__
__/__
__/__
__/__
88
__/__
__/__
__/__
__/__
133
__/__
__/__
__/__
__/__
89
__/__
__/__
__/__
__/__
134
__/__
__/__
__/__
__/__
90
__/__
__/__
__/__
__/__
135
__/__
__/__
__/__
__/__
91
__/__
__/__
__/__
__/__
136
__/__
__/__
__/__
__/__
92
__/__
__/__
__/__
__/__
137
__/__
__/__
__/__
__/__
93
__/__
__/__
__/__
__/__
138
__/__
__/__
__/__
__/__
94
__/__
__/__
__/__
__/__
139
__/__
__/__
__/__
__/__
95
__/__
__/__
__/__
__/__
140
__/__
__/__
__/__
__/__
96
__/__
__/__
__/__
__/__
141
__/__
__/__
__/__
__/__
97
__/__
__/__
__/__
__/__
142
__/__
__/__
__/__
__/__
98
__/__
__/__
__/__
__/__
143
__/__
__/__
__/__
__/__
Digiplex -EVO-
99
__/__
__/__
__/__
__/__
144
__/__
__/__
__/__
__/__
100
__/__
__/__
__/__
__/__
145
__/__
__/__
__/__
__/__
101
__/__
__/__
__/__
__/__
146
__/__
__/__
__/__
__/__
102
__/__
__/__
__/__
__/__
147
__/__
__/__
__/__
__/__
103
__/__
__/__
__/__
__/__
148
__/__
__/__
__/__
__/__
104
__/__
__/__
__/__
__/__
149
__/__
__/__
__/__
__/__
- 16 -
105
__/__
__/__
__/__
__/__
150
__/__
__/__
__/__
__/__
106
__/__
__/__
__/__
__/__
151
__/__
__/__
__/__
__/__
Programming Guide
107
__/__
__/__
__/__
__/__
152
__/__
__/__
__/__
__/__
108
__/__
__/__
__/__
__/__
153
__/__
__/__
__/__
__/__
__/__
__/__
__/__
__/__
__/__
__/__
109
__/__
__/__
__/__
__/__
154
__/__
110
111
__/__
__/__
__/__
__/__
__/__
__/__
__/__
__/__
155
156
__/__
__/__
112
__/__
__/__
__/__
__/__
157
__/__
__/__
__/__
__/__
__/__
__/__
__/__
113
__/__
__/__
__/__
__/__
158
__/__
__/__
__/__
__/__
114
__/__
__/__
__/__
__/__
159
__/__
__/__
__/__
__/__
115
__/__
__/__
__/__
__/__
160
__/__
__/__
__/__
__/__
116
__/__
__/__
__/__
__/__
161
__/__
__/__
__/__
__/__
117
__/__
__/__
__/__
__/__
162
__/__
__/__
__/__
__/__
118
__/__
__/__
__/__
__/__
163
__/__
__/__
__/__
__/__
119
__/__
__/__
__/__
__/__
164
__/__
__/__
__/__
__/__
120
__/__
__/__
__/__
__/__
165
__/__
__/__
__/__
__/__
121
__/__
__/__
__/__
__/__
166
__/__
__/__
__/__
__/__
122
__/__
__/__
__/__
__/__
167
__/__
__/__
__/__
__/__
123
__/__
__/__
__/__
__/__
168
__/__
__/__
__/__
__/__
124
__/__
__/__
__/__
__/__
169
__/__
__/__
__/__
__/__
125
__/__
__/__
__/__
__/__
170
__/__
__/__
__/__
__/__
126
__/__
__/__
__/__
__/__
171
__/__
__/__
__/__
__/__
127
__/__
__/__
__/__
__/__
172
__/__
__/__
__/__
__/__
128
__/__
__/__
__/__
__/__
173
__/__
__/__
__/__
__/__
129
__/__
__/__
__/__
__/__
174
__/__
__/__
__/__
__/__
175
__/__
__/__
__/__
__/__
184
__/__
__/__
__/__
__/__
176
__/__
__/__
__/__
__/__
185
__/__
__/__
__/__
__/__
177
__/__
__/__
__/__
__/__
186
__/__
__/__
__/__
__/__
178
__/__
__/__
__/__
__/__
187
__/__
__/__
__/__
__/__
179
__/__
__/__
__/__
__/__
188
__/__
__/__
__/__
__/__
180
__/__
__/__
__/__
__/__
189
__/__
__/__
__/__
__/__
181
__/__
__/__
__/__
__/__
190
__/__
__/__
__/__
__/__
182
__/__
__/__
__/__
__/__
191
__/__
__/__
__/__
__/__
183
__/__
__/__
__/__
__/__
192
__/__
__/__
__/__
__/__
Zone Labels
Digiplex -EVO- 17 Programming Guide
Zone #
Zone Label
Zone #
Zone Label
Zone #
Zone Label
1
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
31
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
61
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
2
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
32
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
62
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
3
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
33
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
63
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
4
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
34
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
64
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
5
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
35
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
65
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
6
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
36
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
66
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
7
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
37
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
67
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
8
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
38
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
68
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
9
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
39
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
69
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
10
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
40
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
70
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
11
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
41
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
71
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
12
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
42
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
72
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
13
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
43
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
73
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
14
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
44
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
74
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
15
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
45
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
75
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
16
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
46
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
76
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
17
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
47
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
77
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
18
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
48
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
78
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
19
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
49
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
79
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
20
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
50
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
80
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
21
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
51
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
81
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
22
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
52
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
82
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
23
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
53
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
83
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
24
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
54
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
84
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
25
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
55
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
85
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
26
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
56
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
86
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
27
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
57
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
87
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
28
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
58
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
88
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
29
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
59
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
89
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
30
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
60
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
90
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Digiplex -EVO- 18 Programming Guide
91
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
126
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
161
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
92
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
127
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
162
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
93
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
128
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
163
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
94
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
129
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
164
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
95
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
130
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
165
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
96
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
131
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
166
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
97
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
132
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
167
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
98
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
133
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
168
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
99
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
134
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
169
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
100
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
135
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
170
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
101
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
136
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
171
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
102
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
137
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
172
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
103
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
138
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
173
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
104
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
139
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
174
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
105
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
140
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
175
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
106
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
141
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
176
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
107
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
142
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
177
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
108
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
143
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
178
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
109
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
144
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
179
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
110
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
145
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
180
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
111
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
146
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
181
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
112
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
147
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
182
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
113
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
148
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
183
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
114
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
149
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
184
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
115
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
150
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
185
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
116
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
151
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
186
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
117
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
152
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
187
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
118
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
153
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
188
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
119
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
154
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
189
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
120
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
155
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
190
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
121
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
156
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
191
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
122
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
157
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
192
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
123
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
158
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
124
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
159
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
125
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
160
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Keyswitch Programming
Digiplex -EVO- 19 -
Keyswitch
1
_______________________ _______________
Section
[0501]
8-digit Serial Number
___/___/___/___/___/___/___/___
Input#
___/___/___
Section
[0601]
2
_______________________ _______________
[0502]
___/___/___/___/___/___/___/___
___/___/___
[0602]
Programming Guide
Description
Module
3
_______________________ _______________
[0503]
___/___/___/___/___/___/___/___
___/___/___
[0603]
4
_______________________ _______________
[0504]
___/___/___/___/___/___/___/___
___/___/___
[0604]
5
_______________________ _______________
[0505]
___/___/___/___/___/___/___/___
___/___/___
[0605]
6
_______________________ _______________
[0506]
___/___/___/___/___/___/___/___
___/___/___
[0606]
7
_______________________ _______________
[0507]
___/___/___/___/___/___/___/___
___/___/___
[0607]
8
_______________________ _______________
[0508]
___/___/___/___/___/___/___/___
___/___/___
[0608]
9
_______________________ _______________
[0509]
___/___/___/___/___/___/___/___
___/___/___
[0609]
10
_______________________ _______________
[0510]
___/___/___/___/___/___/___/___
___/___/___
[0610]
11
_______________________ _______________
[0511]
___/___/___/___/___/___/___/___
___/___/___
[0611]
12
_______________________ _______________
[0512]
___/___/___/___/___/___/___/___
___/___/___
[0612]
13
_______________________ _______________
[0513]
___/___/___/___/___/___/___/___
___/___/___
[0613]
14
_______________________ _______________
[0514]
___/___/___/___/___/___/___/___
___/___/___
[0614]
15
_______________________ _______________
[0515]
___/___/___/___/___/___/___/___
___/___/___
[0615]
16
_______________________ _______________
[0516]
___/___/___/___/___/___/___/___
___/___/___
[0616]
17
_______________________ _______________
[0517]
___/___/___/___/___/___/___/___
___/___/___
[0617]
18
_______________________ _______________
[0518]
___/___/___/___/___/___/___/___
___/___/___
[0618]
19
_______________________ _______________
[0519]
___/___/___/___/___/___/___/___
___/___/___
[0619]
20
_______________________ _______________
[0520]
___/___/___/___/___/___/___/___
___/___/___
[0620]
21
_______________________ _______________
[0521]
___/___/___/___/___/___/___/___
___/___/___
[0621]
**If you wish to use this keyswitch definition, one or more PGMs must be programmed with the Utility Key event (Event Group #048; see page 25).
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Keyswitch Options
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
_______________________ _______________
Section
[0522]
8-digit Serial Number
___/___/___/___/___/___/___/___
Input#
___/___/___
Section
[0622]
23
_______________________ _______________
[0523]
___/___/___/___/___/___/___/___
___/___/___
[0623]
24
_______________________ _______________
[0524]
___/___/___/___/___/___/___/___
___/___/___
[0624]
25
_______________________ _______________
[0525]
___/___/___/___/___/___/___/___
___/___/___
[0625]
26
_______________________ _______________
[0526]
___/___/___/___/___/___/___/___
___/___/___
[0626]
27
_______________________ _______________
[0527]
___/___/___/___/___/___/___/___
___/___/___
[0627]
28
_______________________ _______________
[0528]
___/___/___/___/___/___/___/___
___/___/___
[0628]
29
_______________________ _______________
[0529]
___/___/___/___/___/___/___/___
___/___/___
[0629]
30
_______________________ _______________
[0530]
___/___/___/___/___/___/___/___
___/___/___
[0630]
31
_______________________ _______________
[0531]
___/___/___/___/___/___/___/___
___/___/___
[0631]
32
_______________________ _______________
[0532]
___/___/___/___/___/___/___/___
___/___/___
[0632]
Keyswitch
22
Description
Module
Define
Assign
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
___
Keyswitch Options
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
Digiplex -EVO-
Keyswitch Arming/Disarming Report Codes
Ademco slow, Silent Knight fast, SESCOA, Ademco express or Pager formats: Key-in desired 2-digit hex values from 00 to FF.
Ademco Contact ID:
Use section [4033] to program a set of default Ademco report codes from the Automatic Report Code Programming on page 50. Then to program the remaining report codes or to change some of the
defaults, enter the individual sections and key-in the desired 2-digit hex value found in the Contact ID Report Code List on page 53.
- 20 -
SIA format:
Use section [4033] to program a set of SIA report codes from the Automatic Report Code Programming on page 50. Codes that have not been set to default can be set to default manually by entering FF in
the appropriate section. To disable the reporting of an event, enter 00 in the appropriate section.
Arming With Keyswitch Report Codes
Programming Guide
Section
Section
Section
Section
Section
Section
[0701]
__/__ Keyswitch 01
[0707]
__/__ Keyswitch 07
[0713]
__/__ Keyswitch 13
[0719]
__/__ Keyswitch 19
[0725]
__/__ Keyswitch 25
[0731]
__/__ Keyswitch 31
[0702]
__/__ Keyswitch 02
[0708]
__/__ Keyswitch 08
[0714]
__/__ Keyswitch 14
[0720]
__/__ Keyswitch 20
[0726]
__/__ Keyswitch 26
[0732]
__/__ Keyswitch 32
[0703]
__/__ Keyswitch 03
[0709]
__/__ Keyswitch 09
[0715]
__/__ Keyswitch 15
[0721]
__/__ Keyswitch 21
[0727]
__/__ Keyswitch 27
[0704]
__/__ Keyswitch 04
[0710]
__/__ Keyswitch 10
[0716]
__/__ Keyswitch 16
[0722]
__/__ Keyswitch 22
[0728]
__/__ Keyswitch 28
[0705]
__/__ Keyswitch 05
[0711]
__/__ Keyswitch 11
[0717]
__/__ Keyswitch 17
[0723]
__/__ Keyswitch 23
[0729]
__/__ Keyswitch 29
[0706]
__/__ Keyswitch 06
[0712]
__/__ Keyswitch 12
[0718]
__/__ Keyswitch 18
[0724]
__/__ Keyswitch 24
[0730]
__/__ Keyswitch 30
Disarming With Keyswitch Report Codes
Section
Section
Section
Section
Section
Section
[0801]
__/__ Keyswitch 01
[0807]
__/__ Keyswitch 07
[0813]
__/__ Keyswitch 13
[0819]
__/__ Keyswitch 19
[0825]
__/__ Keyswitch 25
[0831]
__/__ Keyswitch 31
[0802]
__/__ Keyswitch 02
[0808]
__/__ Keyswitch 08
[0814]
__/__ Keyswitch 14
[0820]
__/__ Keyswitch 20
[0826]
__/__ Keyswitch 26
[0832]
__/__ Keyswitch 32
[0803]
__/__ Keyswitch 03
[0809]
__/__ Keyswitch 09
[0815]
__/__ Keyswitch 15
[0821]
__/__ Keyswitch 21
[0827]
__/__ Keyswitch 27
[0804]
__/__ Keyswitch 04
[0810]
__/__ Keyswitch 10
[0816]
__/__ Keyswitch 16
[0822]
__/__ Keyswitch 22
[0828]
__/__ Keyswitch 28
[0805]
__/__ Keyswitch 05
[0811]
__/__ Keyswitch 11
[0817]
__/__ Keyswitch 17
[0823]
__/__ Keyswitch 23
[0829]
__/__ Keyswitch 29
[0806]
__/__ Keyswitch 06
[0812]
__/__ Keyswitch 12
[0818]
__/__ Keyswitch 18
[0824]
__/__ Keyswitch 24
[0830]
__/__ Keyswitch 30
Programmable Outputs
PGM Test Mode
Section
Description
[0901]
Test PGM1: Activates PGM1 for 8 seconds to verify if the PGM is functioning correctly.
[0902]
Test PGM2: Activates PGM2 for 8 seconds to verify if the PGM is functioning correctly.
[0903]
Test PGM3: Activates PGM3 for 8 seconds to verify if the PGM is functioning correctly.
[0904]
Test PGM4: Activates PGM4 for 8 seconds to verify if the PGM is functioning correctly.
[0905]
Test PGM5: Activates PGM5 for 8 seconds to verify if the PGM is functioning correctly.
PGM Delay
Section
[0918]
[0928]
[0938]
[0948]
[0958]
Data
__/__/__ ( 001 to 255 x 1 sec./mins.)
__/__/__ ( 001 to 255 x 1 sec./mins.)
__/__/__ ( 001 to 255 x 1 sec./mins.)
__/__/__ ( 001 to 255 x 1 sec./mins.)
__/__/__ ( 001 to 255 x 1 sec./mins.)
Description
PGM1 Delay (refer to section [0919] option [2] to see whether the delay is in seconds or minutes)
PGM2 Delay (refer to section [0929] option [2] to see whether the delay is in seconds or minutes)
PGM3 Delay (refer to section [0939] option [2] to see whether the delay is in seconds or minutes)
PGM4 Delay (refer to section [0949] option [2] to see whether the delay is in seconds or minutes)
PGM5 Delay (refer to section [0959] option [2] to see whether the delay is in seconds or minutes)
Default
5 secs./mins.
5 secs./mins.
5 secs./mins.
5 secs./mins.
5 secs./mins.
PGM Options
PGM1
[0919]
Option
[1]
[2]
[3]
[4]
(
= Default Setting)
PGM Deactivation After (OFF = Deactivation Event;
PGM5
[0959]
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
N
N
N
ON = Minutes)
ON = PGM Timer and/or Deactivation Event)
N/A
N
N
N
(OFF = Normally Open; ON = Normally Closed)
N
N
N
Flexible PGM Deactivation Option (OFF = PGM Timer Only;
PGM Initial State
PGM4
[0949]
OFF
ON =
[5] to [8] Future Use
PGM3
[0939]
Disabled
PGM Timer)
PGM Base Time (OFF = Seconds;
PGM2
[0929]
N/A
N/A
N
N
N
N/A
N/A
N
N
N/A
N/A
N
N
N
N
N/A
N
N
N/A
N/A
In order to use the Flexible PGM Deactivation Option (option [3]), the PGM Deactivation After Option (option [1]) must be ON.
PGM Programming
Event Group
Section
PGM Activation
PGM Deactivation
Event Group
000
001
002
003
004
Feature Group
Start #
Section
Section
End #
Section
PGM1
[0910]
__/__/__
[0911]
__/__/__
[0912]
__/__/__
[0913]
__/__/__
PGM2
[0920]
__/__/__
[0921]
__/__/__
[0922]
__/__/__
[0923]
__/__/__
PGM3
[0930]
__/__/__
[0931]
__/__/__
[0932]
__/__/__
[0933]
__/__/__
PGM4
[0940]
__/__/__
[0941]
__/__/__
[0942]
__/__/__
[0943]
__/__/__
PGM5
[0950]
__/__/__
[0951]
__/__/__
[0952]
__/__/__
[0953]
__/__/__
PGM1
[0914]
__/__/__
[0915]
__/__/__
[0916]
__/__/__
[0917]
__/__/__
PGM2
[0924]
__/__/__
[0925]
__/__/__
[0926]
__/__/__
[0927]
__/__/__
PGM3
[0934]
__/__/__
[0935]
__/__/__
[0936]
__/__/__
[0937]
__/__/__
PGM4
[0944]
__/__/__
[0945]
__/__/__
[0946]
__/__/__
[0947]
__/__/__
PGM5
[0954]
__/__/__
[0955]
__/__/__
[0956]
__/__/__
[0957]
__/__/__
Event
Zone is OK
Zone is Open
Zone is Tampered
Zone is in Fire Loop Trouble
Non-reportable Event
Feature Group
Feature
000
255 = any Zone #
Zone Numbers
000
TLM Trouble
Digiplex -EVO-
- 21 -
Programming Guide
Start #
001 to 192
001 to 192
001 to 192
001 to 192
000
End #
001 to 192
001 to 192
001 to 192
001 to 192
000
Event Group
004
Event
Non-reportable Event
005
User Code entered on Keypad
006
User/Card Access on Door
007
Bypass Programming Access
008
TX Delay Zone Alarm
009
Arming with Master
010
Arming with User Code
011
Arming with Keyswitch
012
Special Arming
Feature Group
000
255
000
001
002
003
255
000
255
000
000
001
002
003
255
000
255
000
001
002
003
255
000
001
002
003
255
000
255
000
255
Digiplex -EVO-
Feature
Smoke detector reset
Arm with no entry delay
Arm in Stay mode
Arm in Away mode
Full arm when in Stay mode
Voice module access
Remote control access
PC Fail to communicate
Midnight
NEware User Login
NEware User Logout
User Initiated Callup
Force Answer
Force Hangup
Future Use
Auxiliary Output Manually Activated
Auxiliary Output Manually Deactivated
Voice Reporting Failed
FTC Restore
Software Access (VDMP3, IP100,
NEware, WinLoad)
Any Non-reportable Event
User Codes 000 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Door Numbers
Any door #
One-touch Bypass Programming
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Zone Numbers
Any zone #
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Keyswitch numbers
Any keyswitch
Auto Arming
Arming with WinLoad
Late to Close
No Movement Arming
Partial Arming
One-touch Arming
Future Use
Future Use
(InTouch) Voice Module Arming
Delinquency Closing
Any special arming event
- 22 -
Programming Guide
Start #
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
End #
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
020
Not Used
000 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
000
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 096
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
000
001
002
003
004
005
006
007
008
009
Not Used
Not Used
000 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
000
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 096
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
000
001
002
003
004
005
006
007
008
009
Not Used
Event Group
Event
013
Disarm with Master
014
Disarm with User Code
015
Disarm with Keyswitch
016
Disarm after alarm with Master
017
Disarm after alarm with User Code
018
Disarm after alarm with Keyswitch
019
Alarm Cancelled with Master
020
Alarm Cancelled with User Code
021
Alarm Cancelled with Keyswitch
022
Special Disarming
023
024
025
026
027
Zone Bypassed
Zone in Alarm
Fire Alarm
Zone Alarm Restore
Fire Alarm Restore
Feature Group
000
001
002
003
255
000
001
002
003
255
000
255
000
001
002
003
255
000
001
002
003
255
000
255
000
001
002
003
255
000
001
002
003
255
000
255
Feature
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Keyswitch numbers
Any keyswitch
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Keyswitch numbers
Any keyswitch
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Keyswitch numbers
Any keyswitch
Auto Arm Cancelled
One-touch Stay/Instant Disarm
Disarming with WinLoad
Disarming with WinLoad after alarm
WinLoad cancelled alarm
Future Use
Future Use
Future Use
(InTouch) Voice Module Disarming
Any Special Disarming Event
000
255
028
Early to Disarm by User
000
255 = any zone #
Zone Numbers
000
001
002
003
255
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Digiplex -EVO-
- 23 -
Programming Guide
Start #
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
000
001
002
003
004
005
006
007
008
Not Used
001 to 192
001 to 192
001 to 192
001 to 192
001 to 192
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
End #
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 032
Not Used
000
001
002
003
004
005
006
007
008
Not Used
001 to 192
001 to 192
001 to 192
001 to 192
001 to 192
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
Event Group
Event
029
Late to Disarm by User
030
Special Alarm
031
Duress Alarm by User
032
033
034
035
Zone Shutdown
Zone Tamper
Zone Tamper Restore
Special Tamper
036
Trouble Event
Feature Group
000
001
002
003
255
000
255
000
001
002
003
255
000
255 = any zone #
000
Trouble Restore
000
000
255
038
Module Trouble
000
255
039
Module Trouble Restore
000
255
Digiplex -EVO-
Zone Numbers
Keypad Lockout
Future Use
AC Failure
Battery Failure
Auxiliary Current Limit
Bell Current Limit
Bell Absent
Clock Trouble
Global Fire Loop
Any Trouble Event
TLM Trouble
AC Failure
Battery Failure
Auxiliary Current Limit
Bell Current Limit
Bell Absent
Clock Trouble
Global Fire Loop
Any Trouble Restore Event
Combus Fault
Module Tamper
ROM/RAM error
TLM Trouble
Fail to Communicate
Printer Fault
AC Failure
Battery Failure
Auxiliary Failure
Any Module Trouble Event
Combus Fault
Module Tamper
ROM/RAM error
TLM Trouble
Fail to Communicate
Printer Fault
AC Failure
Battery Failure
Auxiliary Failure
Any Module Trouble Restore Event
255
037
Feature
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Emergency Panic (keys 1 & 3)
Medical Panic (keys 4 & 6)
Fire Panic (keys 7 & 9)
Recent Closing
Police Code
Zone Shutdown
Any Special Alarm Event
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
- 24 -
Programming Guide
Start #
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
000
001
002
003
004
005
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 192
001 to 192
001 to 192
000
000
001
002
003
004
005
006
007
Not Used
000
001
002
003
004
005
006
007
Not Used
000
001
002
003
004
005
006
007
008
Not Used
000
001
002
003
004
005
006
007
008
Not Used
End #
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
000
001
002
003
004
005
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 192
001 to 192
001 to 192
000
000
001
002
003
004
005
006
007
Not Used
000
001
002
003
004
005
006
007
Not Used
000
001
002
003
004
005
006
007
008
Not Used
000
001
002
003
004
005
006
007
008
Not Used
Event Group
Event
040
Fail to Communicate on Telephone
Number
041
042
043
044
Low Battery on Zone
Zone Supervision Trouble
Low Battery on Zone Restored
Zone Supervision Trouble Restored
045
Feature
Telephone Number
Any telephone number
000
255 = any Zone #
Zone Numbers
255
000
001
002
003
255
000
001
002
003
255
000
255
Early to Arm by User
047
Late to Arm by User
048
Utility Key
049
050
051
052
053
054
Request for Exit
Access Denied
Door Left Open Alarm
Door Forced Alarm
Door Left Open Restore
Door Forced Open Restore
055
Intellizone Triggered
056
057
058
060
061
Zone Excluded on Force Arming
Zone Went Back to Arm Status
New Module Assigned on Combus
Module Manually Removed From
Combus
Non Saved Event
Future Use
062
Access Granted to User
063
Access Denied to User
Zone Numbers
Any zone number
Zone Numbers
Zone Numbers
Module Address
Start #
001 to 004
Not Used
001 to 192
001 to 192
001 to 192
001 to 192
000
001
002
003
004
005
006
007
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 064
Not Used
001 to 032
001 to 032
001 to 032
001 to 032
001 to 032
001 to 032
001 to 192
Not Used
001 to 192
001 to 192
001 to 254
End #
001 to 004
Not Used
001 to 192
001 to 192
001 to 192
001 to 192
000
001
002
003
004
005
006
007
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 064
Not Used
001 to 032
001 to 032
001 to 032
001 to 032
001 to 032
001 to 032
001 to 192
Not Used
001 to 192
001 to 192
001 to 254
Module Address
001 to 254
001 to 254
Remote Control Rejected
Future Use
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
000
Future Use
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
000
Future Use
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
001 to 255
000 to 255
000 to 255
000 to 231
Not Used
Power up after total power down
Software reset (Watchdog)
Test Report
Listen-In Request
WinLoad In (connected)
WinLoad Out (disconnected)
Installer in programming
Installer out of programming
Any Special Event
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
User Codes 001 to 255
User Codes 256 to 511
User Codes 512 to 767
User Codes 768 to 999
Any User Code
Utility Key 001 to 064*†
Any Utility Key*†
000
Special Events
046
059
Feature Group
000
255
000
255 = any Door
Number
000
255
000
255 = Any Zone
000
255 = Any Module
000
Future Use
000
001
002
003
255
000
001
002
003
255
Door Numbers
*: See page 27
†: See page 27
Digiplex -EVO-
- 25 -
Programming Guide
Event Group
Event
Feature Group
064
Status 1
See Note 1
on page 27
065
Status 2
See Note 1
on page 27
066
Status 3
See Note 1
on page 27
Feature
Armed
Force Armed
Stay Armed
Instant Armed
Strobe Alarm
Silent Alarm
Audible Alarm
Fire Alarm
Ready
Exit Delay
Entry Delay
System in Trouble
Alarm in Memory
Zones Bypassed
Bypass, Master, Installer Programming
Keypad Lockout
Intellizone Delay Engaged**
Fire Delay Engaged
Auto Arm
Arming with Voice Module (set until
Exit Delay finishes)
Tamper
Zone Low Battery
Fire Loop Trouble
Zone Supervision Trouble
Chime in Partition 1 to 4
(000 to 003 = System 1 to 4)
Smoke Detector Power Reset
Ground Start
Kiss Off
Telephone Ring
Bell on Partition 1 to 8
(008 to 015 = Partitions 1 to 8)
Pulsed Alarm in Partition 1 to 8
(016 to 023 = Partitions 1 to 8)
Open/close Kiss Off in Partition 1 to 8
(024 to 031 = Partitions 1 to 8)
Keyswitch/PGM Inputs # 01 to 32
(032 to 063 = Keyswitch/PGM Inputs # 01 to 32)
Status of Access Door 01 to 32
(064 to 095 = Access Doors 01 to 32)
067
Special Status
Trouble in System
Trouble in Dialer
Trouble in Module
Trouble in Combus
Future Use
Time and Date Trouble
AC Failure
Battery Failure
Auxiliary Current Limit
Bell Current Limit
Bell Absent
ROM error
RAM error
Future Use
TLM 1 Trouble
Fail to Communicate 1
Fail to Communicate 2
Fail to Communicate 3
Fail to Communicate 4
Fail to Communicate with PC
Future Use
N/A
Digiplex -EVO-
- 26 -
Programming Guide
Start #
000
001
002
003
004
005
006
007
000
001
002
003
004
005
006
007
000
001
002
End #
000
001
002
003
004
005
006
007
000
001
002
003
004
005
006
007
000
001
002
003
003
004
005
006
007
004
005
006
007
000 to 003
000 to 003
004
005
006
007
004
005
006
007
008 to 015
008 to 015
016 to 023
016 to 023
024 to 031
024 to 031
032 to 063
032 to 063
064 to 095
064 to 095
096
097
098
099
100 to 102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
096
097
098
099
100 to 102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
Event Group
Event
Feature Group
067
Special Status
N/A
070
NOTE 1:
Clock
Feature
Future Use
Module Tamper Trouble
Module ROM error
Module TLM error
Module Failure to Communicate
Module Printer Trouble
Module AC Failure
Module Battery Trouble
Module Auxiliary Failure
Missing Keypad
Missing Module
Future Use
Global Combus Failure
Combus Overload
Future Use
Dialer Relay
N/A
000 = Occurs in all partitions enabled in the system (see section [3031]).
001 = Partition 1 003 = Partition 3 005 = Partition 5 007 = Partition 7
002 = Partition 2 004 = Partition 4 006 = Partition 6 008 = Partition 8
Start #
119
120
121
122
123
124
125
126
127
128
129
130 to 132
133
134
135
136
Hour
End #
119
120
121
122
123
124
125
126
127
128
129
130 to 132
133
134
135
136
Minutes
255 = Occurs in at least one partition enabled in the system.
*:
If a Keyswitch Input is used, the input must be defined as “Generates a Utility Key Event on Open” or “Generates a Utility Key Event on Open
and Close”. If a remote control is used, the remote control button must be defined as a Utility Key button.
**
†:
This event cannot be used for a module’s PGM programming.
Actions that Activate a Utility Key Event:
Actions
Utility Key Event
Keypad Utility Keys
Keyswitch Inputs
(definition = [3])
Keyswitch Inputs
(definition = [4])
Remote Control
Utility Key Event 1
[1] & [2]
KS** Input 1 opens
KS** Input 1 opens
Utility Key 1 RC button‡
Utility Key Event 2
[4] & [5]
KS** Input 2 opens
KS** Input 1 closes
Utility Key 2 RC button‡
Utility Key Event 3
[7] & [8]
KS** Input 3 opens
KS** Input 2 opens
Utility Key 3 RC button‡
Utility Key Event 4
[CLEAR] & [0] or [*] & [0]
KS** Input 4 opens
KS** Input 2 closes
Utility Key 4 RC button‡
Utility Key Event 5
[2] & [3]
KS** Input 5 opens
KS** Input 3 opens
Utility Key 5 RC button‡
Utility Key Event 6
[5] & [6]
KS** Input 6 opens
KS** Input 3 closes
N/A
Utility Key Event 7
[8] & [9]
KS** Input 7 opens
KS** Input 4 opens
N/A
Utility Key Event 8
[0] & [ENTER] or [0] & [#]
KS** Input 8 opens
KS** Input 4 closes
N/A
Utility Key Event 9
N/A
KS** Input 9 opens
KS** Input 5 opens
N/A
Utility Key Event 10
N/A
KS** Input 10 opens
KS** Input 5 closes
N/A
Utility Key Event 11
N/A
KS** Input 11 opens
KS** Input 6 opens
N/A
Utility Key Event 12
N/A
KS** Input 12 opens
KS** Input 6 closes
N/A
Utility Key Event 13
N/A
KS** Input 13 opens
KS** Input 7 opens
N/A
Utility Key Event 14
N/A
KS** Input 14 opens
KS** Input 7 closes
N/A
Utility Key Event 15
N/A
KS** Input 15 opens
KS** Input 8 opens
N/A
Utility Key Event 16
N/A
KS** Input 16 opens
KS** Input 8 closes
N/A
Utility Key Event 17
N/A
KS** Input 17 opens
KS** Input 9 opens
N/A
Utility Key Event 18
N/A
KS** Input 18 opens
KS** Input 9 closes
N/A
N/A
KS** Input 31 opens
KS** Input 16 opens
N/A
Utility Key Event 32
N/A
KS** Input 32 opens
KS** Input 16 closes
N/A
Utility Key Event 33
N/A
N/A
KS** Input 17 opens
N/A
Utility Key Event 34
N/A
N/A
KS** Input 17 closes
N/A
N/A
Utility Key Event 31
N/A
N/A
N/A
Utility Key Event 63
N/A
N/A
KS** Input 32 opens
N/A
N/A
Utility Key Event 64
N/A
N/A
KS** Input 32 closes
N/A
** Keyswitch
‡ Refer
to the MG-RTX3 Reference and Installation Manual for remote control button programming instructions.
Digiplex -EVO-
- 27 -
Programming Guide
Input Speeds
Section
Data - Decimal Value (001 - 255)
Description
Default
[0961]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 01
600 msec.
[0962]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 02
600 msec.
[0963]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 03
600 msec.
[0964]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 04
600 msec.
[0965]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 05
600 msec.
[0966]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 06
600 msec.
[0967]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 07
600 msec.
[0968]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 08
600 msec.
[0969]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 09 (ATZ OF INPUT 01)
600 msec.
[0970]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 10 (ATZ OF INPUT 02)
600 msec.
[0971]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 11 (ATZ OF INPUT 03)
600 msec.
[0972]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 12 (ATZ OF INPUT 04)
600 msec.
[0973]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 13 (ATZ OF INPUT 05)
600 msec.
[0974]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 14 (ATZ OF INPUT 06)
600 msec.
[0975]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 15 (ATZ OF INPUT 07)
600 msec.
[0976]
__/__/__ (001 to 255) x 30 msec.
INPUT SPEED OF INPUT 16 (ATZ OF INPUT 08)
600 msec.
Installer Code Programming
Section
[1000]
Data
Description
Default
__/__/__/__/__/__
INSTALLER CODE
(REFER TO SECTION [3001], Installer lock ON PAGE 36)
000000
Digiplex -EVO-
- 28 -
Programming Guide
User Code Options
Sections [1001] to [1999]
The instructions that follow detail how to program access codes when using an LCD keypad. Program User Code Options, Partition Assignment and Access
Control features for users 001 to 999. Refer to the appropriate keypad User’s Manual for instructions on how certain users can program these values. For
instructions on how to program users when using a Grafica keypad, refer to Grafica’s User Manual. A complete Grafica User Manual is available on our Web
site at paradox.com.
To program user labels, refer to the LCD Keypad User Guide.
Note: For hardware requirements,
See “New Remote Control
Programming” on page 2.
Digiplex -EVO-
- 29 -
Programming Guide
Arming and Disarming Report Codes
Ademco slow, Silent Knight fast, SESCOA, Ademco express or Pager formats:
Key-in desired 2-digit hex values from 00 to FF.
Ademco format:
Use section [4033] to program a set of default Ademco report codes from the Automatic Report Code Programming on page 50. Then to program the
remaining report codes or to change some of the defaults, enter the individual sections and key-in the desired 2-digit hex value found in the Contact ID
Report Code List on page 53.
SIA format:
Use section [4033] to program a set of SIA report codes from the Automatic Report Code Programming on page 50. Codes that have not been set to default
can be set to default manually by entering FF in the appropriate section. To disable the reporting of an event, enter 00 in the appropriate section.
Arming Report Codes
Section
Section
Section
Section
[2001]
__/__ Access Code 1
[2026]
__/__ Access Code 26
[2051]
__/__ Access Code 51
[2076]
__/__ Access Code 76
[2002]
__/__ Access Code 2
[2027]
__/__ Access Code 27
[2052]
__/__ Access Code 52
[2077]
__/__ Access Code 77
[2003]
__/__ Access Code 3
[2028]
__/__ Access Code 28
[2053]
__/__ Access Code 53
[2078]
__/__ Access Code 78
[2004]
__/__ Access Code 4
[2029]
__/__ Access Code 29
[2054]
__/__ Access Code 54
[2079]
__/__ Access Code 79
[2005]
__/__ Access Code 5
[2030]
__/__ Access Code 30
[2055]
__/__ Access Code 55
[2080]
__/__ Access Code 80
[2006]
__/__ Access Code 6
[2031]
__/__ Access Code 31
[2056]
__/__ Access Code 56
[2081]
__/__ Access Code 81
[2007]
__/__ Access Code 7
[2032]
__/__ Access Code 32
[2057]
__/__ Access Code 57
[2082]
__/__ Access Code 82
[2008]
__/__ Access Code 8
[2033]
__/__ Access Code 33
[2058]
__/__ Access Code 58
[2083]
__/__ Access Code 83
[2009]
__/__ Access Code 9
[2034]
__/__ Access Code 34
[2059]
__/__ Access Code 59
[2084]
__/__ Access Code 84
[2010]
__/__ Access Code 10
[2035]
__/__ Access Code 35
[2060]
__/__ Access Code 60
[2085]
__/__ Access Code 85
[2011]
__/__ Access Code 11
[2036]
__/__ Access Code 36
[2061]
__/__ Access Code 61
[2086]
__/__ Access Code 86
[2012]
__/__ Access Code 12
[2037]
__/__ Access Code 37
[2062]
__/__ Access Code 62
[2087]
__/__ Access Code 87
[2013]
__/__ Access Code 13
[2038]
__/__ Access Code 38
[2063]
__/__ Access Code 63
[2088]
__/__ Access Code 88
[2014]
__/__ Access Code 14
[2039]
__/__ Access Code 39
[2064]
__/__ Access Code 64
[2089]
__/__ Access Code 89
[2015]
__/__ Access Code 15
[2040]
__/__ Access Code 40
[2065]
__/__ Access Code 65
[2090]
__/__ Access Code 90
[2016]
__/__ Access Code 16
[2041]
__/__ Access Code 41
[2066]
__/__ Access Code 66
[2091]
__/__ Access Code 91
[2017]
__/__ Access Code 17
[2042]
__/__ Access Code 42
[2067]
__/__ Access Code 67
[2092]
__/__ Access Code 92
[2018]
__/__ Access Code 18
[2043]
__/__ Access Code 43
[2068]
__/__ Access Code 68
[2093]
__/__ Access Code 93
[2019]
__/__ Access Code 19
[2044]
__/__ Access Code 44
[2069]
__/__ Access Code 69
[2094]
__/__ Access Code 94
[2020]
__/__ Access Code 20
[2045]
__/__ Access Code 45
[2070]
__/__ Access Code 70
[2095]
__/__ Access Code 95
[2021]
__/__ Access Code 21
[2046]
__/__ Access Code 46
[2071]
__/__ Access Code 71
[2096]
__/__ Access Code 96
[2022]
__/__ Access Code 22
[2047]
__/__ Access Code 47
[2072]
__/__ Access Code 72
[2097]
__/__ Access Code 97
[2023]
__/__ Access Code 23
[2048]
__/__ Access Code 48
[2073]
__/__ Access Code 73
[2098]
__/__ Access Code 98
[2024]
__/__ Access Code 24
[2049]
__/__ Access Code 49
[2074]
__/__ Access Code 74
[2099]
[2025]
__/__ Access Code 25
[2050]
__/__ Access Code 50
[2075]
__/__ Access Code 75
__/__ Access Codes
99 to 999
Disarming Report Codes
Section
Section
Section
Section
[2101]
__/__ Access Code 1
[2107]
__/__ Access Code 7
[2113]
__/__ Access Code 13
[2119]
__/__ Access Code 19
[2102]
__/__ Access Code 2
[2108]
__/__ Access Code 8
[2114]
__/__ Access Code 14
[2120]
__/__ Access Code 20
[2103]
__/__ Access Code 3
[2109]
__/__ Access Code 9
[2115]
__/__ Access Code 15
[2121]
__/__ Access Code 21
[2104]
__/__ Access Code 4
[2110]
__/__ Access Code 10
[2116]
__/__ Access Code 16
[2122]
__/__ Access Code 22
[2105]
__/__ Access Code 5
[2111]
__/__ Access Code 11
[2117]
__/__ Access Code 17
[2123]
__/__ Access Code 23
[2106]
__/__ Access Code 6
[2112]
__/__ Access Code 12
[2118]
__/__ Access Code 18
[2124]
__/__ Access Code 24
Digiplex -EVO-
- 30 -
Programming Guide
[2125]
__/__ Access Code 25
[2144]
__/__ Access Code 44
[2163]
__/__ Access Code 63
[2182]
__/__ Access Code 82
[2126]
__/__ Access Code 26
[2145]
__/__ Access Code 45
[2164]
__/__ Access Code 64
[2183]
__/__ Access Code 83
[2127]
__/__ Access Code 27
[2146]
__/__ Access Code 46
[2165]
__/__ Access Code 65
[2184]
__/__ Access Code 84
[2128]
__/__ Access Code 28
[2147]
__/__ Access Code 47
[2166]
__/__ Access Code 66
[2185]
__/__ Access Code 85
[2129]
__/__ Access Code 29
[2148]
__/__ Access Code 48
[2167]
__/__ Access Code 67
[2186]
__/__ Access Code 86
[2130]
__/__ Access Code 30
[2149]
__/__ Access Code 49
[2168]
__/__ Access Code 68
[2187]
__/__ Access Code 87
[2131]
__/__ Access Code 31
[2150]
__/__ Access Code 50
[2169]
__/__ Access Code 69
[2188]
__/__ Access Code 88
[2132]
__/__ Access Code 32
[2151]
__/__ Access Code 51
[2170]
__/__ Access Code 70
[2189]
__/__ Access Code 89
[2133]
__/__ Access Code 33
[2152]
__/__ Access Code 52
[2171]
__/__ Access Code 71
[2190]
__/__ Access Code 90
[2134]
__/__ Access Code 34
[2153]
__/__ Access Code 53
[2172]
__/__ Access Code 72
[2191]
__/__ Access Code 91
[2135]
__/__ Access Code 35
[2154]
__/__ Access Code 54
[2173]
__/__ Access Code 73
[2192]
__/__ Access Code 92
[2136]
__/__ Access Code 36
[2155]
__/__ Access Code 55
[2174]
__/__ Access Code 74
[2193]
__/__ Access Code 93
[2137]
__/__ Access Code 37
[2156]
__/__ Access Code 56
[2175]
__/__ Access Code 75
[2194]
__/__ Access Code 94
[2138]
__/__ Access Code 38
[2157]
__/__ Access Code 57
[2176]
__/__ Access Code 76
[2195]
__/__ Access Code 95
[2139]
__/__ Access Code 39
[2158]
__/__ Access Code 58
[2177]
__/__ Access Code 77
[2196]
__/__ Access Code 96
[2140]
__/__ Access Code 40
[2159]
__/__ Access Code 59
[2178]
__/__ Access Code 78
[2197]
__/__ Access Code 97
[2141]
__/__ Access Code 41
[2160]
__/__ Access Code 60
[2179]
__/__ Access Code 79
[2198]
__/__ Access Code 98
[2142]
__/__ Access Code 42
[2161]
__/__ Access Code 61
[2180]
__/__ Access Code 80
[2199]
[2143]
__/__ Access Code 43
[2162]
__/__ Access Code 62
[2181]
__/__ Access Code 81
__/__ Access Codes
99 to 999
Access Control Sections
Assigning a Door to the System
These doors are used to program the Access Levels in sections [2601] to [2615]. If you want a door to be linked to the alarm system, install a door contact
and assign it to a zone through Zone Programming. Note: Under the Door Numbering column (see below), enter the 8-digit serial number of the
Access Control Module or Keypad.
Door Numbering
Door Options
Door Labels
Door #
Section
Serial Number
Section
Option
Section
Label
Door 01
[2201]
__/__/__/__/__/__/__/__
[2251]
1 2 3 4 5 * * *
[2301]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 02
[2202]
__/__/__/__/__/__/__/__
[2252]
1 2 3 4 5 * * *
[2302]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 03
[2203]
__/__/__/__/__/__/__/__
[2253]
1 2 3 4 5 * * *
[2303]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 04
[2204]
__/__/__/__/__/__/__/__
[2254]
1 2 3 4 5 * * *
[2304]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 05
[2205]
__/__/__/__/__/__/__/__
[2255]
1 2 3 4 5 * * *
[2305]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 06
[2206]
__/__/__/__/__/__/__/__
[2256]
1 2 3 4 5 * * *
[2306]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 07
[2207]
__/__/__/__/__/__/__/__
[2257]
1 2 3 4 5 * * *
[2307]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 08
[2208]
__/__/__/__/__/__/__/__
[2258]
1 2 3 4 5 * * *
[2308]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 09
[2209]
__/__/__/__/__/__/__/__
[2259]
1 2 3 4 5 * * *
[2309]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 10
[2210]
__/__/__/__/__/__/__/__
[2260]
1 2 3 4 5 * * *
[2310]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 11
[2211]
__/__/__/__/__/__/__/__
[2261]
1 2 3 4 5 * * *
[2311]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 12
[2212]
__/__/__/__/__/__/__/__
[2262]
1 2 3 4 5 * * *
[2312]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 13
[2213]
__/__/__/__/__/__/__/__
[2263]
1 2 3 4 5 * * *
[2313]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 14
[2214]
__/__/__/__/__/__/__/__
[2264]
1 2 3 4 5 * * *
[2314]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 15
[2215]
__/__/__/__/__/__/__/__
[2265]
1 2 3 4 5 * * *
[2315]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 16
[2216]
__/__/__/__/__/__/__/__
[2266]
1 2 3 4 5 * * *
[2316]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 17
[2217]
__/__/__/__/__/__/__/__
[2267]
1 2 3 4 5 * * *
[2317]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 18
[2218]
__/__/__/__/__/__/__/__
[2268]
1 2 3 4 5 * * *
[2318]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Digiplex -EVO-
- 31 -
Programming Guide
Door 19
[2219]
__/__/__/__/__/__/__/__
[2269]
1 2 3 4 5 * * *
[2319]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 20
[2220]
__/__/__/__/__/__/__/__
[2270]
1 2 3 4 5 * * *
[2320]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 21
[2221]
__/__/__/__/__/__/__/__
[2271]
1 2 3 4 5 * * *
[2321]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 22
[2222]
__/__/__/__/__/__/__/__
[2272]
1 2 3 4 5 * * *
[2322]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 23
[2223]
__/__/__/__/__/__/__/__
[2273]
1 2 3 4 5 * * *
[2323]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 24
[2224]
__/__/__/__/__/__/__/__
[2274]
1 2 3 4 5 * * *
[2324]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 25
[2225]
__/__/__/__/__/__/__/__
[2275]
1 2 3 4 5 * * *
[2325]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 26
[2226]
__/__/__/__/__/__/__/__
[2276]
1 2 3 4 5 * * *
[2326]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 27
[2227]
__/__/__/__/__/__/__/__
[2277]
1 2 3 4 5 * * *
[2327]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 28
[2228]
__/__/__/__/__/__/__/__
[2278]
1 2 3 4 5 * * *
[2328]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 29
[2229]
__/__/__/__/__/__/__/__
[2279]
1 2 3 4 5 * * *
[2329]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 30
[2230]
__/__/__/__/__/__/__/__
[2280]
1 2 3 4 5 * * *
[2330]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 31
[2231]
__/__/__/__/__/__/__/__
[2281]
1 2 3 4 5 * * *
[2331]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door 32
[2232]
__/__/__/__/__/__/__/__
[2282]
1 2 3 4 5 * * *
[2332]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
Door Options: [1] “OR/AND” Door Access - Each door can be programmed to grant access only to cards assigned to at least one of the door’s partitions (“OR” Door Access) or to cards assigned to all the
door’s assigned partitions (“AND” Door Access). Enabling option [1] will set the door in “OR” Door Access Mode. Disabling option [1] will set the door in “AND” Door Access Mode.
[2] User Code Access - When option [2] is disabled, the access control door is accessed through the reader by presenting the access card to the reader. When option [2] is enabled, a reader
is not needed to access the controlled door. To access the controlled door, the user must enter their access code and then press the [ACC] button. (EVO641 / EVO641R only)
[3] Card and Code Access - Enabling option [3] will require that both a valid access control card and a valid user access code be used. The access control card and user access code must
belong to the same user. Disabling option [3] requires that either a valid access control card or a valid user access code be used to access the controlled door. (LCD keypad with reader, and
PosiPIN™ reader only)
[4] Restrict Arming on Door - When option [4] is enabled, that door’s reader cannot be used to arm the system even if the access control card has the arming option enabled.
[5] Restrict Disarming on Door - When option [5] is enabled, that door’s reader cannot be used to disarm the system even if the access control card has the disarming option enabled.
Schedule Programming
Each Schedule determines when users are permitted access. Schedules 001 to 015 (sections [2401] to [2415]) are Primary Schedules. The Primary
Schedules are the only schedules that can be assigned to a User Access Code. Schedules 016 to 032 (sections [2416] to [2432]) are Secondary Schedules.
The Secondary Schedules cannot be assigned to a User Access Code and can only be used as backup schedules.
Section
[2401]
[2402]
[2403]
[2404]
PRIMARY SCHEDULES
[2405]
[2406]
[2407]
[2408]
[2409]
[2410]
[2411]
[2412]
Schedule
001
002
003
004
005
006
007
008
009
010
011
012
Intervals
Start Time (from)
End Time (to)
Days (turn ON or OFF)
S M T W
T
F S H
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Digiplex -EVO-
- 32 -
Programming Guide
SECONDARY SCHEDULES
Section
Schedule
Intervals
Start Time (from)
End Time (to)
Days (turn ON or OFF)
[2413]
013
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2414]
014
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2415]
015
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2416]
016
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2417]
017
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2418]
018
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2419]
019
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2420]
020
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2421]
021
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2422]
022
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2423]
023
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2424]
024
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2425]
025
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2426]
026
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2427]
027
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2428]
028
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2429]
029
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2430]
030
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2431]
031
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[2432]
032
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
S M T W
T
F S H
1
5
6
2
3
4
7 8
The Start and End Time of a schedule cannot cross over into another day. For example, to program a shift from 10PM one day to 6AM the
next morning, you must program Schedule A: Start Time 22:00 and End Time 23:59 then program Schedule B Start Time 00:00 and End
Time 06:00. The schedule will not be interrupted between 23:59 and 00:00.
Digiplex -EVO-
- 33 -
Programming Guide
Backup Schedules
Each programmed schedule (see Schedule Programming on page 32) can be backed up or linked to another schedule. The backup will be used in the event
that the first schedule is invalid. Enter the 3-digit number of the schedule you wish to use as the backup. Ex: You wish to backup schedule 001 to schedule
011. In section [2501], you would enter 011.
The control panel will verify up to 8 linked schedules, one after another, until it determines whether the card or code is valid. Ex: If Schedule 001 is linked to
Schedule 005 and Schedule 005 is linked to Schedule 030, then the control panel will verify Schedules 001, 005 and 030.
Section
Section
Section
Section
[2501]
__/__/__ Schedule 001
[2509]
__/__/__ Schedule 009
[2517]
__/__/__ Schedule 017
[2525]
__/__/__ Schedule 025
[2502]
__/__/__ Schedule 002
[2510]
__/__/__ Schedule 010
[2518]
__/__/__ Schedule 018
[2526]
__/__/__ Schedule 026
[2503]
__/__/__ Schedule 003
[2511]
__/__/__ Schedule 011
[2519]
__/__/__ Schedule 019
[2527]
__/__/__ Schedule 027
[2504]
__/__/__ Schedule 004
[2512]
__/__/__ Schedule 012
[2520]
__/__/__ Schedule 020
[2528]
__/__/__ Schedule 028
[2505]
__/__/__ Schedule 005
[2513]
__/__/__ Schedule 013
[2521]
__/__/__ Schedule 021
[2529]
__/__/__ Schedule 029
[2506]
__/__/__ Schedule 006
[2514]
__/__/__ Schedule 014
[2522]
__/__/__ Schedule 022
[2530]
__/__/__ Schedule 030
[2507]
__/__/__ Schedule 007
[2515]
__/__/__ Schedule 015
[2523]
__/__/__ Schedule 023
[2531]
__/__/__ Schedule 031
[2508]
__/__/__ Schedule 008
[2516]
__/__/__ Schedule 016
[2524]
__/__/__ Schedule 024
[2532]
__/__/__ Schedule 032
Programming Access Levels
Each Access Level is a combination of Access Control doors. For example, if option [1] in the First Screen is enabled in section [2601], Level 01 will allow
access only to Door 01.
Section
Level
Access to Doors (turn ON or OFF access):
First Screen
Doors 01 to 08
Second Screen
Doors 09 to 16
Third Screen
Doors 17 to 24
Fourth Screen
Doors 25 to 32
[2601]
01
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2602]
02
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2603]
03
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2604]
04
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2605]
05
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2606]
06
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2607]
07
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2608]
08
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2609]
09
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2610]
10
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2611]
11
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2612]
12
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2613]
13
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2614]
14
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
[2615]
15
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Holiday Programming
When [H] is enabled in a schedule (refer to page 29), access is permitted to users during the days programmed in the sections below.
Section
Month
Days
First Screen
Days 01 to 08
Second Screen
Days 09 to 16
Third Screen
Days 17 to 24
Fourth Screen
Days 25 to 31
[2701]
January
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2702]
February
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2703]
March
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2704]
April
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2705]
May
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2706]
June
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2707]
July
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2708]
August
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2709]
September
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2710]
October
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2711]
November
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
[2712]
December
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7*
Digiplex -EVO-
- 34 -
Programming Guide
Keypad Numbering
Sections [2801] to [2832] are used solely for the purpose of identifying a keypad in the event buffer. Enter the 8-digit serial number of the keypad you wish to
label as keypad x (1 to 32). The event buffer will then display any events pertaining to a keypad as keypad 1 or keypad 2, etc.
Section
Keypad #
Serial Number
Section
Keypad #
Serial Number
Section
Keypad #
Serial Number
[2801]
Keypad 1
__/__/__/__/__/__/__/__
[2812]
Keypad 12 __/__/__/__/__/__/__/__
[2823]
Keypad 23 __/__/__/__/__/__/__/__
[2802]
Keypad 2
__/__/__/__/__/__/__/__
[2813]
Keypad 13 __/__/__/__/__/__/__/__
[2824]
Keypad 24 __/__/__/__/__/__/__/__
[2803]
Keypad 3
__/__/__/__/__/__/__/__
[2814]
Keypad 14 __/__/__/__/__/__/__/__
[2825]
Keypad 25 __/__/__/__/__/__/__/__
[2804]
Keypad 4
__/__/__/__/__/__/__/__
[2815]
Keypad 15 __/__/__/__/__/__/__/__
[2826]
Keypad 26 __/__/__/__/__/__/__/__
[2805]
Keypad 5
__/__/__/__/__/__/__/__
[2816]
Keypad 16 __/__/__/__/__/__/__/__
[2827]
Keypad 27 __/__/__/__/__/__/__/__
[2806]
Keypad 6
__/__/__/__/__/__/__/__
[2817]
Keypad 17 __/__/__/__/__/__/__/__
[2828]
Keypad 28 __/__/__/__/__/__/__/__
[2807]
Keypad 7
__/__/__/__/__/__/__/__
[2818]
Keypad 18 __/__/__/__/__/__/__/__
[2829]
Keypad 29 __/__/__/__/__/__/__/__
[2808]
Keypad 8
__/__/__/__/__/__/__/__
[2819]
Keypad 19 __/__/__/__/__/__/__/__
[2830]
Keypad 30 __/__/__/__/__/__/__/__
[2809]
Keypad 9
__/__/__/__/__/__/__/__
[2820]
Keypad 20 __/__/__/__/__/__/__/__
[2831]
Keypad 31 __/__/__/__/__/__/__/__
[2810]
Keypad 10 __/__/__/__/__/__/__/__
[2821]
Keypad 21 __/__/__/__/__/__/__/__
[2832]
Keypad 32 __/__/__/__/__/__/__/__
[2811]
Keypad 11 __/__/__/__/__/__/__/__
[2822]
Keypad 22 __/__/__/__/__/__/__/__
Remote Control Programming
It is possible to set up to 16 different button templates which can then be assigned to individual users. Each user is pre-programmed with a default remote
control button pattern: (1 B) (C 0) (template 0).
For hardware requirements, See “New Remote Control Programming” on page 2.
Remote Control Templates
Section
[2900]
Template # Button Options
Template 0
(__/__) (__/__)
Section
Template #
Button Options
[2908]
Template 8
(__/__) (__/__)
[2901]
Template 1
(__/__) (__/__)
[2909]
Template 9
(__/__) (__/__)
[2902]
Template 2
(__/__) (__/__)
[2910]
Template 10
(__/__) (__/__)
[2903]
Template 3
(__/__) (__/__)
[2911]
Template 11
(__/__) (__/__)
[2904]
Template 4
(__/__) (__/__)
[2912]
Template 12
(__/__) (__/__)
[2905]
Template 5
(__/__) (__/__)
[2913]
Template 13
(__/__) (__/__)
[2906]
Template 6
(__/__) (__/__)
[2914]
Template 14
(__/__) (__/__)
[2907]
Template 7
(__/__) (__/__)
[2915]
Template 15
(__/__) (__/__)
(1B) (C0) (00) (00)
future use
Button 1
Button 2
Button 3
Buttons 2+3
MG-REM1
+
MG-REM2
+
Default
(1 B) (C 0)
Regular
Arm
Utility
Key 1
Utility
Key 2
Disabled
Section
[2940]
[2941]
Description
Default Button
Template
To select a button template as
the default template, enter (00)
to (15) representing button
templates in sections [2900] to
[2915].
Assign Button
Template
To assign a button template to
a user, select user when
prompted, then enter (00) to
(15) representing button
templates in sections [2900] to
[2915]. If user 000 is selected,
all users are modified.
Table 1: Template Entries
Disarm
Disarm:
cannot be
modified
Entry
[0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
Function
Button Disabled
Regular Arm
Stay Arm
Instant Arm*
Force Arm*
N/A
N/A
N/A
* Version V1.10 or higher
Digiplex -EVO-
- 35 -
Programming Guide
Entry
[8]
[9]
A = [stay]
B = [force]
C = [arm]
D = [disarm]
E = [byp]
F = [mem]
Function
Panic 1
Panic 2
Panic 3
Utility Key 1
Utility Key 2
Utility Key 3
Utility Key 4
N/A
Control Panel Settings
Section
Data
Description
Default
[3001]
__/__/__ (147 = Locked, 000 = Unlocked)
INSTALLER LOCK
000
[3010]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ PC PHONE NUMBER (32 DIGITS)
[3011]
__/__/__/__
PANEL IDENTIFICATION
0000
[3012]
__/__/__/__
PC PASSWORD
0000
[3013]
__/__/__/__
NEWARE TCP/IP PASSWORD
0000
[3020]
__/__
PANEL PARTITION (00 - 08)
00
[3021]
__/__
TROUBLE SHUTDOWN (00 - 15)
00
DAYLIGHT SAVINGS TIME
018
[3022]
__/__/__
SCHEDULE
DAYLIGHT SAVINGS TIME SCHEDULE
Value
Schedule Used
Value
Schedule Used
000
Mexico/St-Johns/Bahamas/Turks and Caicos
010
New-Zealand/Chatham
001
Cuba
011
Tonga
002
Brazil
012
Iraq/Syria
003
Chile
013
Israel (TBC)
004
Falkland Islands
014
Lebanon/Kyrgyzstan
005
Paraguay
015
Palestine
006
European Union/United Kingdom/Greenland
016
Egypt
007
Russia and surrounding countries
017
Namibia
008
South Australia/Victoria/Australian Capital Territory/New
South Wales
018
Canada/United States (default)
009
Tasmania/Lord Howe Island
019
New Zealand (Starting September 2007)
System Options
= Default setting
SECTION [3029] : System Options 1
OFF
Option
[1]
SECTION [3030] : System Options 2
ON
N Enabled
OFF
Option
ON
Disabled
N Enabled
Disabled
N Enabled
N Disabled
Enabled
Shabbat feature
Disabled
N Enabled
Battery charge current
350mA
[6]
AC failure not displayed as trouble
Disabled
[7]
Clear bell limit trouble
On restore
[8]
Combus Speed*
Normal
Enable if using an MG-RTX3
without an EVO641 / EVO641R
(see New Remote Control
Programming on page 2)
Disabled
[2]
Future Use
Disabled
N Enabled
[2]
No bell cut-off during pulse alarm
[3]
Future Use
Disabled
N Enabled
[3]
[4]
Future Use
Disabled
N Enabled
Daylight saving time (see
page 36)
[4]
[5]
Future Use
Disabled
[5]
[1]
PGM 1 = 2-wire smoke detector
input (255)
[6]
Future Use
Disabled
[7]
Future Use
Disabled
[8]
Future Use
Disabled
N Enabled
N Enabled
N Manually
N Enabled
N 850mA†
N Enabled
N Manually
N High
* Please note that when the Combus Speed is changed, all operations on the system will be suspended for approximately 1 minute while
the system adjust itself.
† A 40VA transformer is required when selecting the 850mA battery charge current. Using a 20VA transformer with a battery charge
current of 850mA may damage the system.
Digiplex -EVO-
- 36 -
Programming Guide
= Default setting
SECTION [3031] : Partition Options 1
SECTION [3032] : Partition Options 2
OFF
Option
[1]
Partition 1
N Disabled
[2]
Partition 2
Disabled
[3]
Partition 3
Disabled
[4]
Partition 4
Disabled
[5]
Partition 5 (EVO192 only)
Disabled
[6]
Partition 6 (EVO192 only)
Disabled
[7]
Partition 7 (EVO192 only)
Disabled
[8]
Partition 8 (EVO192 only)
Disabled
ON
Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
SECTION [3033] : System Options 3
[1]
Bell/siren output in partition 1
N Disabled
[2]
Bell/siren output in partition 2
Disabled
[3]
Bell/siren output in partition 3
Disabled
[4]
Bell/siren output in partition 4
Disabled
[5]
Bell/siren output in partition 5
Disabled
[6]
Bell/siren output in partition 6
Disabled
[7]
Bell/siren output in partition 7
Disabled
[8]
Bell/siren output in partition 8
Disabled
ON
Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
SECTION [3034] : System Options 4
OFF
Option
OFF
Option
ON
Option
[1]&[2] Wireless Transmitter Supervision
Options (see Table on page 37)
[1]
Multiple actions in user menu
Disabled
N Enabled
[2]
User code length
Fixed
N Flexible
[3]
User code length (if option [2] OFF)
4-digits
N 6-digits
[4]
Power save mode
[5]
Bypass not displayed while system
is armed
[6]
OFF
ON
N See Table N See Table
N See Table N See Table
[3]
Generate supervision failure if
detected on a bypassed wireless zone
Yes
N No
[4]
Restrict arming on a wireless
transmitter supervision failure
Disabled
N Enabled
N Disabled
Enabled
N Disabled
Enabled
Trouble Latch
Disabled
N Enabled
[7]
EOL resistor on hardwire zones
Disabled
N Enabled
[7]
[8]
(ATZ) Zone Doubling
Disabled
N Enabled
Generate tamper if detected on
bypass zone
[8]
Restrict arming on tamper trouble
[5]&[6] Zone & Module Tamper Recognition
Options (see Table on page 37)
N See Table N See Table
N See Table N See Table
NYes
Disabled
No
N Enabled
SECTION [3035] : System Options 5
OFF
Option
ON
N Enabled
[1]
Restrict arming on AC failure
Disabled
[2]
Restrict arming on battery failure
Disabled
[3]
Restrict arming on bell or auxiliary
failure
Disabled
N Enabled
[4]
Restrict arming on TLM failure
Disabled
N Enabled
[5]
Restrict arming on module
troubles
Disabled
[6]
Account Number Transmission
Partition #
[7]
Transmit zone status on serial
port*
Disabled
N Enabled
N Enabled
N Tel #
N Enabled
[8]
Serial Port Baud Rate
N38,400
57,600
*This option is used by some event monitoring software such as Hyperterminal. With WinLoad and printers, it is always being transmitted,
Wireless Transmitter Supervision Options
Zone & Module Tamper Recognition Options*
(Section [3034]; options [1] & [2])
(Section [3034]: options [5] & [6])
[1]
OFF
[2]
OFF - Disabled (default)
[5] [6]
OFF OFF - Disabled (default)
OFF
ON
ON
OFF - When disarmed: GENERATES TROUBLE ONLY
- GENERATES TROUBLE ONLY (WHEN ARMED OR DISARMED)
OFF ON - GENERATES TROUBLE ONLY (WHEN ARMED OR DISARMED)
ON OFF - When disarmed: GENERATES TROUBLE ONLY
- When armed: Follows Zone Alarm Types (page 9) for Zone
Tamper. Generates Trouble for Module Tamper.
- When armed: Follows Zone Alarm Types (page 9)
ON
ON
- When disarmed: GENERATES AUDIBLE ALARM
- When armed: Follows Zone Alarm Types (page 9)
Digiplex -EVO-
ON
ON - When disarmed: GENERATES AUDIBLE ALARM
- When armed: Follows Zone Alarm Types (page 9)
*For instructions on wiring a panel for tamper recognition, see page 61.
- 37 -
Programming Guide
Dialer Options
= Default setting
SECTION [3036]: Dialer Options 1
OFF
Option
Telephone Line Monitoring (TLM) [1]&[2] (see table below)
[3]
Dialer (reporting to monitoring
station)
[4]
Dialing method
Pulse ratio
[5]
(E.U. = Europe; N.A. = North America)
[6]
SECTION [3037] : Dialer Options 2
Busy tone detection
ON
Disabled NEnabled
N Pulse
Disabled
[2]
Automatic event buffer transmission
Disabled
N Enabled
Disabled
N Enabled
N See Table N See Table
N See Table N See Table
1:1.5 (N.A.)
[5]
N Disabled
Keypad beep on successful arming/
disarming report
Enabled
[6]
Alternate Dialing
[7]
Dial Tone Delay (if no dial tone)
Force dial
[8]
Report zone restore
Disabled
Switch to pulse dialing on 5 attempt
Disabled
[8]
Bell/siren upon communication
failure if system is armed
Disabled
N Enabled
N Enabled
N Enabled
Call back
N 1:2 (E.U.)
th
ON
[1]
[3]&[4] Auto Test Report Transmission
Options (see Auto Test Report
Settings on page 38)
Tone (DTMF)
[7]
[1]
OFF
OFF
Option
N See Table N See Table
N See Table N See Table
Disabled N Enabled
N Hang-up
N Enabled
ON = On zone closure; OFF = On bell cut-off
Telephone Line Monitoring (TLM) Options
Auto-Test Report Transmission Options
(Section [3036]; options [1] & [2])
(Section [3037]; options [3] & [4])
[2]
OFF Disabled (default)
OFF
ON
ON
OFF When armed: GENERATES A TROUBLE
ON
ON
[3] [4]
OFF OFF Transmit the test report code every time the days programmed
in section [3040] have elapsed at the time programmed in
section [3041] (default).
When armed: GENERATES AN AUDIBLE ALARM
OFF ON When disarmed: Transmit test report code every time the
time programmed in section [3043] has elapsed.
When armed: Transmit test report code every time the time
programmed in section [3042] has elapsed.
TLM silent alarm: BECOMES AN AUDIBLE ALARM
ON OFF The control panel will transmit the test report code every hour
on the minute value programmed in section [3041] (the last
two digits). Note that the first two digits of section [3041] will
be ignored. For example, if 10:25 was programmed into
section [3041], the test report code would be transmitted at
the 25th minute of every hour, i.e. 11:25, 12:25, etc.
ON
ON The test report code will be transmitted when any of the
conditions of the second and third options listed above
(options [3] = OFF and [4] = ON / options [3] = ON and [4] =
OFF) are met.
Other Options
= Default setting
SECTION [3038]: Access Control Options
OFF
Option
ON
[1]
Access control feature
Disabled
N Enabled
[2]
Log “Request for Exit” in event
buffer*
Disabled
N Enabled
[3]
Log “Door Left Open Restore” in
event buffer
Disabled
N Enabled
[4]
Log “Door Forced Restore” in event
buffer
Disabled
N Enabled
[5]
Burglar alarm on forced door
Disabled
N Enabled
[6]
Skip exit delay when arming with
access card
[7]
Burglar alarm on door left open
Disabled
N Enabled
[8]
Who has access during clock loss
All users
* Since “Request for Exit” events can occur often, the Event
Buffer may fill up quickly.
Disabled N Enabled
N Masters*
Digiplex -EVO-
* This also includes users with 00 for schedule access.
- 38 -
Programming Guide
Schedule Tolerance Window
Section
[3039]
Data
Description
__/__/__ ( x 1 minute)
SCHEDULE TOLERANCE
Default
000
WINDOW
Auto Test Report Settings
Section
Data
Description
Default
[3040]
__/__/__ ( x 1 day; 000 = disabled)
AUTO TEST REPORT
000
[3041]
__/__ : __/__ Hrs (00-23) & Mins (00-59)
AUTO TEST REPORT TIME OF DAY
00 : 00
[3042]
__/__/__ (000 - 255 x 1 minute)
ARMED REPORT DELAY
5 minutes
[3043]
__/__/__ (000 - 255 x 1 minute)
DISARMED REPORT DELAY
60 minutes
Data
Description
Default
Timings
Section
[3051]
__/__/__ (000 - 255)
RING COUNTER
008
[3052]
__/__/__ (000 - 255 x 4 seconds)
ANSWERING MACHINE OVERRIDE DELAY
32 seconds
[3053]
__/__/__ (000 - 255 x 2 seconds)
TLM FAIL TIMER
32 seconds
[3054]
__/__/__ (000 - 127 x 1 second)
DELAY BETWEEN DIALING ATTEMPTS
20 seconds
[3055]
__/__/__ (000 - 255 x 1 second; 000 = Instant Report)
DELAY ALARM TRANSMISSION TIMER
000
[3056]
__/__/__ (000 - 255 x 1 attempt)
MAXIMUM DIALING ATTEMPTS
8 attempts
[3057]
__/__/__ (000 - 127 x 1 second)
PAGER DELAY BEFORE DATA TRANSMISSION
20 seconds
[3058]
__/__/__ (000 - 255 x 1 minute; 000 = Instant Report)
DELAY POWER FAILURE REPORT
30 minutes
[3059]
__/__/__ (000 - 255 x 1 repeat; 000 = No Repeat)
REPEAT PAGER REPORT CODE TRANSMISSION
000
[3060]
__/__/__ (000 - 255 x 1 minute)
POWER FAILURE RESTORE DELAY REPORT
030 minutes
Communication Settings
Account Numbers
Only the SIA format supports the [0] = 0 digit in its account numbers. Account numbers that use other reporting formats do not support
the [0] = 0 digit. Enter the [STAY] = A digit in its place. When using the SIA Format, and the Account Number Transmission (see option [6]
in section [3035] on page 37) corresponds to the partition, the control panel only uses the Partition 1 Account Number programmed in
section [3061], but the report code includes the partition number.
MSTN = Monitoring Station Telephone Number
Section
Data - Hex Value (0000 - FFFF)
Description
Default
[3061]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 1 (PARTITION 1* / MSTN
1 †)
0000
[3062]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 2 (PARTITION 2* / MSTN 2†)
0000
[3063]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 3 (PARTITION 3 */ MSTN 3†)
0000
[3064]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 4 (PARTITION 4 */ MSTN 4†)
0000
[3065]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 5 (PARTITION 5* / N/A†)
0000
[3066]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 6 (PARTITION 6* / N/A†)
0000
[3067]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 7 (PARTITION 7* / N/A†)
0000
[3068]
__/__/__/__ (if less than 4 digits, press [ENTER])
ACCOUNT NUMBER 8 (PARTITION 8* / N/A†)
0000
* Option [6] in section [3035] is disabled.
†
Option [6] in section [3035] is enabled.
Digiplex -EVO-
- 39 -
Programming Guide
Reporting Formats
Section
Description
[3070]
___
___
___
___
REPORTING FORMATS FOR TELEPHONE NUMBERS 1 TO 4
Use the same format for each number. Only the pager format can be used with
other reporting formats.
For more information, refer to Automatic Report Code Programming on
page 50.
Section Data (Press [ENTER] if less than 32 digits)
Description
[3071] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__MONITORING STATION/PAGER TELEPHONE #1
[3072] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__MONITORING STATION/PAGER TELEPHONE #2
[3073] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__MONITORING STATION/PAGER TELEPHONE #3
[3074] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__MONITORING STATION/PAGER TELEPHONE #4
For North American installations using either SIA or Contact ID reporting formats, enter *70 and then either P (4-second pause) or W (wait
for second dial tone) before the phone number in sections [3071] to [3074] to disable call-waiting.
Special Telephone Number Keys
Function
LCD
Grafica
Function
Clear
[#]
Delete
[FORCE]
[ARM] (press key until desired Delete from cursor to the end
[DISARM] letter/symbol appears) Insert space
[BYP]
Dial 9 for outside line
[STAY]
*#
Switch to Tone Dialing (T)
Wait for second dial tone (W)
4-second pause (P)
LCD
Grafica
[CLEAR] Left action key (Clear)
[TRBL]
—
[ACC]
—
[MEM]
—
9+[STAY]
—
System Event Call Direction
= Default setting
SECTION [3081]: Special Reporting
SECTION [3080]: System Troubles & Trouble Restores
OFF
Option
[1]
Call Telephone #1
N Disabled
[2]
Call Telephone #2
Disabled
[3]
Call Telephone #3
Disabled
[4]
Call Telephone #4
Disabled
[5]
Backup on Telephone #1
Disabled
[6]
Backup on Telephone #2
Disabled
[7]
Backup on Telephone #3
Disabled
[8]
Backup on Telephone #4
Disabled
ON
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
Digiplex -EVO-
OFF
Option
Enabled
- 40 -
[1]
Call Telephone #1
N Disabled
[2]
Call Telephone #2
Disabled
[3]
Call Telephone #3
Disabled
[4]
Call Telephone #4
Disabled
[5]
Backup on Telephone #1
Disabled
[6]
Backup on Telephone #2
Disabled
[7]
Backup on Telephone #3
Disabled
[8]
Backup on Telephone #4
Disabled
Programming Guide
ON
Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
VDMP3 Voice Module
Program up to 8 telephone numbers which the VDMP3 will call in sequence in the case of an alarm. Telephone numbers should be programmed in priority sequence as the VDMP3
will start with telephone number 1.
SECTION [3087]:
VDMP3 Features (PGM)
OFF
Option
ON
[1]
Feature (PGM) 1
Disabled
[2]
Feature (PGM) 2
Disabled
[3]
Feature (PGM) 3
Disabled
[4]
Feature (PGM) 4
Disabled
[5]
Feature (PGM) 5
Disabled
[6]
Feature (PGM) 6
Disabled
[7]
Feature (PGM) 7
Disabled
[8]
Feature (PGM) 8
Disabled
N Enabled
N Enabled
N Enabled
To see how VDMP3 Features relate to EVO Utility Key functions,
See “Feature Activation (PGMs)” on page 55.
N Enabled
N Enabled
N Enabled
N Enabled
N Enabled
VDMP3 Settings
Section
Data
Description
Default
[3088]
__/__/__ (000 - 127 x 1 second)
DELAY BEFORE SENDING THE VOICE MESSAGE
003
[3089]
__/__/__ (000 - 255 x 1 repetitions)
DEFINES THE NUMBER OF TIMES THE VOICE MESSAGE IS REPEATED 008
SECTION [3090]: VDMP3 Functions
OFF
Option
[1]
Arm / Disarm
[2]
Voice Reporting
N Disabled
ON
Enabled
N Disabled
Enabled
Section Data (Press [ENTER] if less than 32 digits)
Description
[3091] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 1
[3092] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 2
[3093] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 3
[3094] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 4
[3095] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 5
[3096] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 6
[3097] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 7
[3098] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ VOICE MODULE TELEPHONE NUMBER 8
For extra key functions, see Special Telephone Number Keys on page 40
Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8
[3133]
[3233]
[3333]
[3433]
[3533]
[3633]
[3733]
[3833]
Option
[1]
OFF
Telephone number 1
[2]
Telephone number 2
[3]
Telephone number 3
[4]
Telephone number 4
[5]
Telephone number 5
[6]
Telephone number 6
[7]
Telephone number 7
[8]
Telephone number 8
N
ON
N
N
N
N
N
N
N
OFF
N
ON
N
N
N
N
N
N
N
Digiplex -EVO-
OFF
N
ON
N
N
N
N
N
N
N
- 41 -
OFF
N
ON
N
N
N
N
N
N
N
OFF
N
ON
N
N
N
N
N
N
N
Programming Guide
OFF
N
ON
N
N
N
N
N
N
N
OFF
N
ON
N
N
N
N
N
N
N
OFF
N
ON
N
N
N
N
N
N
N
Partition Settings
Section
[3100]
[3200]
Partition Label
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 1
Section
[3500]
Partition Label
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 5
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 2
[3600]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 6
[3300]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 3
[3700]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 7
[3400]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 4
[3800]
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ Partition 8
Auto-Arm Times
SECTION [3101]: Partition 1
SECTION [3201]: Partition 2
SECTION [3301]: Partition 3
SECTION [3401]: Partition 4
Hours (00-23) & Minutes (00-59)
Hours (00-23) & Minutes (00-59)
Hours (00-23) & Minutes (00-59)
Hours (00-23) & Minutes (00-59)
__/__ : __/__
__/__ : __/__
__/__ : __/__
__/__ : __/__
SECTION [3501]: Partition 5
SECTION [3601]: Partition 6
SECTION [3701]: Partition 7
SECTION [3801]: Partition 8
Hours (00-23) & Minutes (00-59)
Hours (00-23) & Minutes (00-59)
Hours (00-23) & Minutes (00-59)
Hours (00-23) & Minutes (00-59)
__/__ : __/__
__/__ : __/__
__/__ : __/__
__/__ : __/__
Arming Report Schedules (If partition is armed outside schedule, the panel will send an Early to Close [3916] and/or Late to Close [3917] report code; see page 48)
Section
Schedule
[3102]
Partition 1
001
[3202]
Partition 2
002
[3302]
Partition 3
003
[3402]
Partition 4
004
[3502]
Partition 5
005
[3602]
Partition 6
006
[3702]
Partition 7
007
[3802]
Partition 8
008
Intervals
Start Time (from)
End Time (to)
Days (turn ON or OFF)
S M T W
T
F S H
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Disarming Report Schedules (if partition is disarmed outside schedule, the panel will send an Early to Open [3926] and/or Late to Open [3927] report code; see page 48)
Section
Schedule
Intervals
Start Time (from)
___ ___ : ___ ___
End Time (to)
T
F S H
1
5
6
[3103]
Partition 1
001
Schedule A
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3203]
Partition 2
002
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3303]
Partition 3
003
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3403]
Partition 4
004
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3503]
Partition 5
005
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3603]
Partition 6
006
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3703]
Partition 7
007
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3803]
Partition 8
008
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Digiplex -EVO-
- 42 -
___ ___ : ___ ___
Days (turn ON or OFF)
S M T W
Programming Guide
2
3
4
7 8
Partition Timers
Description
Decimal Values from 000 to 255
Arming/Disarming Schedule Tolerance
Window (Data x 1 minute; Default = 000)
# of Invalid Codes Before Lockout
(Data x 1 attempt; Default = 005 attempts)
Keypad Lockout Duration
(Data x 1 minute, 000 = Report Only; Default = 015)
No Movement Timer
(Data x 5 minutes; Default = Disabled)
Exit Delay Timer
(Data x 1 second; Default = 060 seconds)
Recent Closing Delay
(Data x 1 second; Default = Disabled)
Intellizone Delay
(Data x 1 second; Default = 032 seconds)
Digiplex -EVO-
Entry Delay 1
(Data x 1 second; Default = 030 seconds)
Entry Delay 2
(Data x 1 second; Default = 060 seconds)
Bell Cut-off Timer
(Data x 1 minute; Default = 4 minutes)
Auto Zone Shutdown
(000 to 015 alarms; Default = Disabled)
Max. # of Zones that can be Bypassed
- 43 -
(Data x 1 zone; Default = unlimited)
Recycle Delay
(Data x 1 minute; Default = Disabled)
Number of Recycles
Programming Guide
(Data x 1 attempt; Default = unlimited)
Police Code Timer
(Data x 1 minute; Default = Disabled)
Closing Delinquency Timer
(Data x 1 day; Default = Disabled)
Postpone auto-arm delay
(Data x 15 minute Default = 0 )
Partition 1
Partition 2
Partition 3
Partition 4
Partition 5
Partition 6
Partition 7
Partition 8
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
[3104]
__/__/__
[3204]
__/__/__
[3304]
__/__/__
[3404]
__/__/__
[3504]
__/__/__
[3604]
__/__/__
[3704]
__/__/__
[3804]
__/__/__
[3105]
__/__/__
[3205]
__/__/__
[3305]
__/__/__
[3405]
__/__/__
[3505]
__/__/__
[3605]
__/__/__
[3705]
__/__/__
[3805]
__/__/__
[3106]
__/__/__
[3206]
__/__/__
[3306]
__/__/__
[3406]
__/__/__
[3506]
__/__/__
[3606]
__/__/__
[3706]
__/__/__
[3806]
__/__/__
[3107]
__/__/__
[3207]
__/__/__
[3307]
__/__/__
[3407]
__/__/__
[3507]
__/__/__
[3607]
__/__/__
[3707]
__/__/__
[3807]
__/__/__
[3108]
__/__/__
[3208]
__/__/__
[3308]
__/__/__
[3408]
__/__/__
[3508]
__/__/__
[3608]
__/__/__
[3708]
__/__/__
[3808]
__/__/__
[3109]
__/__/__
[3209]
__/__/__
[3309]
__/__/__
[3409]
__/__/__
[3509]
__/__/__
[3609]
__/__/__
[3709]
__/__/__
[3809]
__/__/__
[3110]
__/__/__
[3210]
__/__/__
[3310]
__/__/__
[3410]
__/__/__
[3510]
__/__/__
[3610]
__/__/__
[3710]
__/__/__
[3810]
__/__/__
[3111]
__/__/__
[3211]
__/__/__
[3311]
__/__/__
[3411]
__/__/__
[3511]
__/__/__
[3611]
__/__/__
[3711]
__/__/__
[3811]
__/__/__
[3112]
__/__/__
[3212]
__/__/__
[3312]
__/__/__
[3412]
__/__/__
[3512]
__/__/__
[3612]
__/__/__
[3712]
__/__/__
[3812]
__/__/__
[3113]
__/__/__
[3213]
__/__/__
[3313]
__/__/__
[3413]
__/__/__
[3513]
__/__/__
[3613]
__/__/__
[3713]
__/__/__
[3813]
__/__/__
[3114]
__/__/__
[3214]
__/__/__
[3314]
__/__/__
[3414]
__/__/__
[3514]
__/__/__
[3614]
__/__/__
[3714]
__/__/__
[3814]
__/__/__
[3115]
__/__/__
[3215]
__/__/__
[3315]
__/__/__
[3415]
__/__/__
[3515]
__/__/__
[3615]
__/__/__
[3715]
__/__/__
[3815]
__/__/__
[3116]
__/__/__
[3216]
__/__/__
[3316]
__/__/__
[3416]
__/__/__
[3516]
__/__/__
[3616]
__/__/__
[3716]
__/__/__
[3816]
__/__/__
[3117]
__/__/__
[3217]
__/__/__
[3317]
__/__/__
[3417]
__/__/__
[3517]
__/__/__
[3617]
__/__/__
[3717]
__/__/__
[3817]
__/__/__
[3118]
__/__/__
[3218]
__/__/__
[3318]
__/__/__
[3418]
__/__/__
[3518]
__/__/__
[3618]
__/__/__
[3718]
__/__/__
[3818]
__/__/__
[3119]
__/__/__
[3219]
__/__/__
[3319]
__/__/__
[3419]
__/__/__
[3519]
__/__/__
[3619]
__/__/__
[3719]
__/__/__
[3819]
__/__/__
[3120]
__/__/__
[3220]
__/__/__
[3320]
__/__/__
[3420]
__/__/__
[3520]
__/__/__
[3620]
__/__/__
[3720]
__/__/__
[3820]
__/__/__
Partition Options 1
SECTION [3121] : Partition 1
Option
(
= Default Setting)
[1]
Switch to Stay Arm (if no Delay zone opened)
[2]
Arm/Disarm with Partition 2
[3]
Arm/Disarm with Partition 3
[4]
Arm/Disarm with Partition 4
[5]
Arm/Disarm with Partition 5
[6]
Arm/Disarm with Partition 6
[7]
Arm/Disarm with Partition 7
[8]
Arm/Disarm with Partition 8
SECTION [3221] : Partition 2
OFF
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
Option
(
= Default Setting)
[1]
Arm/Disarm with Partition 1
[2]
Switch to Stay Arm (if no Delay zone opened)
[3]
Arm/Disarm with Partition 3
[4]
Arm/Disarm with Partition 4
[5]
Arm/Disarm with Partition 5
[6]
Arm/Disarm with Partition 6
[7]
Arm/Disarm with Partition 7
[8]
Arm/Disarm with Partition 8
SECTION [3321] : Partition 3
OFF
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
Option
(
= Default Setting)
[1]
Arm/Disarm with Partition 1
[2]
Arm/Disarm with Partition 2
[3]
Switch to Stay Arm (if no Delay zone opened)
[4]
Arm/Disarm with Partition 4
[5]
Arm/Disarm with Partition 5
[6]
Arm/Disarm with Partition 6
[7]
Arm/Disarm with Partition 7
[8]
Arm/Disarm with Partition 8
OFF
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
SECTION [3421] : Partition 4
Option
(
SECTION [3521] : Partition 5
= Default Setting)
[1]
Arm/Disarm with Partition 1
[2]
Arm/Disarm with Partition 2
[3]
Arm/Disarm with Partition 3
[4]
Switch to Stay Arm (if no Delay zone opened)
[5]
Arm/Disarm with Partition 5
[6]
Arm/Disarm with Partition 6
[7]
Arm/Disarm with Partition 7
[8]
Arm/Disarm with Partition 8
OFF
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
Digiplex -EVO-
SECTION [3721] : Partition 7
Option
(
- 44 Programming Guide
Arm/Disarm with Partition 1
[2]
Arm/Disarm with Partition 2
[3]
Arm/Disarm with Partition 3
[4]
Arm/Disarm with Partition 4
[5]
Arm/Disarm with Partition 5
[6]
Arm/Disarm with Partition 6
[7]
Switch to Stay Arm (if no Delay zone opened)
[8]
Arm/Disarm with Partition 8
= Default Setting)
(
[1]
Arm/Disarm with Partition 1
[2]
Arm/Disarm with Partition 2
[3]
Arm/Disarm with Partition 3
[4]
Arm/Disarm with Partition 4
[5]
Switch to Stay Arm (if no Delay zone opened)
[6]
Arm/Disarm with Partition 6
[7]
Arm/Disarm with Partition 7
[8]
Arm/Disarm with Partition 8
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
Option
= Default Setting)
(
[1]
Arm/Disarm with Partition 1
[2]
Arm/Disarm with Partition 2
[3]
Arm/Disarm with Partition 3
[4]
Arm/Disarm with Partition 4
[5]
Arm/Disarm with Partition 5
[6]
Switch to Stay Arm (if no Delay zone opened)
[7]
Arm/Disarm with Partition 7
[8]
Arm/Disarm with Partition 8
OFF
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
SECTION [3821] : Partition 8
= Default Setting)
[1]
Option
SECTION [3621] : Partition 6
OFF
OFF
ON
Disabled
Enabled
Option
N
N
N
N
N
N
N
N
= Default Setting)
(
[1]
Arm/Disarm with Partition 1
[2]
Arm/Disarm with Partition 2
[3]
Arm/Disarm with Partition 3
[4]
Arm/Disarm with Partition 4
[5]
Arm/Disarm with Partition 5
[6]
Arm/Disarm with Partition 6
[7]
Arm/Disarm with Partition 7
[8]
Switch to Stay Arm (if no Delay zone opened)
OFF
ON
Disabled
Enabled
N
N
N
N
N
N
N
N
Partition Arming / Disarming Options
Partition 1
[3122]
Option
(
= Default Setting)
[1]
Timed Auto-Arming
[2]
“No Movement” Auto-Arming
[3]
Arming method for Auto Arm (OFF = Force Arming;
[4]
Exit Delay Termination
OFF
ON
N
Partition 2
[3222]
OFF
N
ON = Stay Arming)
N
N
ON
N
Partition 3
[3322]
OFF
N
N
N
ON
N
Partition 4
[3422]
OFF
N
N
N
ON
N
Partition 5
[3522]
OFF
N
N
N
ON
N
Partition 6
[3622]
OFF
N
N
N
ON
N
Partition 7
[3722]
OFF
N
N
N
ON
N
Partition 8
[3822]
OFF
N
N
N
ON
N
N
N
N
[5]
Future Use
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
[6]
Future Use
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
[7]
Future Use
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
[8]
Follow zone switches to Entry Delay 2 when delay zone is
bypassed
N
N
N
N
N
N
N
N
N/A
Partition Panic Alarm Options
Partition 1
[3123]
Option
(
= Default Setting)
[1]
Panic 1 (Keys 1 & 3)
[2]
Panic 2 (Keys 4 & 6)
[3]
Panic 3 (Keys 7 & 9)
[4]
Panic 1 Alarm Type (OFF = Report Only;
ON = Audible Alarm)
[5]
Panic 2 Alarm Type (OFF = Report Only;
ON = Audible Alarm)
[6]
Panic 3 Alarm Type (OFF = Report Only;
ON = Fire Alarm)
[7]
Always Report Disarming (OFF = Always;
[8]
Auto-Force on Regular Arming
OFF
ON
N
Partition 2
[3223]
OFF
N
N
OFF
N
N
N
OFF
N
OFF
OFF
N
N
N
N
N
N
N
N
N
ON
N
N
N
N
N
N
N
N
ON
Partition 8
[3823]
N
N
N
N
OFF
N
N
N
N
N
N
N
ON
Partition 7
[3723]
N
N
N
N
ON
Partition 6
[3623]
N
N
N
N
N
N
N
N
ON
Partition 5
[3523]
N
N
N
N
OFF
N
N
N
N
N
N
N
ON
Partition 4
[3423]
N
N
N
ON = Only After Alarm)
ON
Partition 3
[3323]
N
N
N
Digiplex -EVO-
Partition Bell Squawk Options
Partition 1
[3124]
Option
(
[1]
Bell Squawk upon Disarming
[2]
Bell Squawk upon Arming
= Default Setting)
OFF
ON
N
Partition 2
[3224]
OFF
N
- 45 -
Bell Squawk upon Auto-arming
Bell Squawk during Exit Delay
[5]
Bell Squawk during Entry Delay
[6]
Bell Squawk upon Remote Arming/Disarming
Programming Guide
[7]
Ring Back: Bell Squawk if Disarmed after Alarm
[8]
Ring Back: Keypad beeps if Disarmed after Alarm
N
N
N
OFF
N
N
N
N
OFF
N
N
N
N
OFF
N
N
N
N
OFF
N
N
N
N
OFF
N
N
N
N
OFF
N
N
N
N
N
N
N
ON
N
N
N
N
ON
Partition 8
[3824]
N
N
N
N
ON
Partition 7
[3724]
N
N
N
N
ON
Partition 6
[3624]
N
N
N
N
ON
Partition 5
[3524]
N
N
N
N
ON
Partition 4
[3424]
N
N
N
N
N
N
N
[3]
[4]
ON
Partition 3
[3324]
N
N
N
N
N
Partition One-Touch Options
Partition 1
[3125]
Option
(
[1]
One-touch Regular Arming*
[2]
One-touch Stay Arming*
[3]
One-touch Instant Arming*
[4]
One-touch Force Arming*
[5]
One-touch Stay or Instant Disarming*
= Default Setting)
[6]
One-touch Bypass Programming*
[7]
One-touch Event Display*
[8]
No Exit Delay when Arming with remote control
OFF
ON
N
Partition 2
[3225]
OFF
N
OFF
N
N
N
OFF
OFF
N
OFF
OFF
N
N
N
N
N
N
N
N
ON
N
N
N
N
N
N
N
N
ON
Partition 8
[3825]
N
N
N
N
N
N
N
N
ON
Partition 7
[3725]
N
N
N
N
N
N
N
N
ON
Partition 6
[3625]
N
N
N
N
ON
Partition 5
[3525]
N
N
N
N
OFF
N
N
N
N
N
N
N
ON
Partition 4
[3425]
N
N
N
N
N
N
N
N
ON
Partition 3
[3325]
N
N
N
* If a keypad is assigned to more than one partition, the one-touch feature must be enabled in all the keypad’s assigned partitions. Example: To enable the one-touch Regular Arming
feature of a keypad assigned to partitions 1, 2 and 5, enable sections [3125] option [1], [3225] option [1] and [3525] option [1].
Partition Special Options
Partition 1
[3126]
Option
(
= Default Setting)
[1]
Intellizone Delay
[2]
Intellizone Double Knockout and Zone Crossing
[3]
Intellizone Zone Crossing
OFF
ON
N
Partition 2
[3226]
OFF
N
Auto Force on Stay Arming
Police Code is Generated on Zone Crossing Only
[6]
Future Use
N
N/A
OFF
OFF
ON
N
Partition 5
[3526]
OFF
N
N
OFF
N
OFF
N
OFF
N
N
N
N
ON
N
N
N
N
ON
Partition 8
[3826]
N
N
N
N
ON
Partition 7
[3726]
N
N
N
N
ON
Partition 6
[3626]
N
N
N
N
N/A
N
N
N
N/A
ON
Partition 4
[3426]
N
N
N
N/A
N
N
N
[4]
[5]
ON
Partition 3
[3326]
N
N
N
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
[7]
Future Use
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
[8]
Future Use
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Digiplex -EVO-
Partition Arming / Disarming Event Call Direction
Partition 1
[3127]
Option
(
- 46 -
[1]
Call Telephone Number 1
[2]
Call Telephone Number 2
[3]
Call Telephone Number 3
[4]
Call Telephone Number 4
[5]
Backup on Telephone Number 1
Programming Guide
[6]
Backup on Telephone Number 2
[7]
Backup on Telephone Number 3
[8]
Backup on Telephone Number 4
= Default Setting)
OFF
N
ON
N
Partition 2
[3227]
OFF
N
N
ON
N
Partition 3
[3327]
OFF
N
N
N
N
N
N
OFF
N
N
N
N
N
N
N
N
N
N
ON
N
N
N
N
N
OFF
N
N
N
ON
Partition 8
[3827]
N
N
N
N
N
OFF
N
N
N
ON
Partition 7
[3727]
N
N
N
N
ON
Partition 6
[3627]
N
N
N
N
N
OFF
N
N
N
ON
Partition 5
[3527]
N
N
N
N
N
N
N
N
N
OFF
N
N
N
ON
Partition 4
[3427]
N
N
N
Partition Alarm / Alarm Restore Event Call Direction
Partition 1
[3128]
Option
(
[1]
Call Telephone Number 1
[2]
Call Telephone Number 2
[3]
Call Telephone Number 3
[4]
Call Telephone Number 4
[5]
Backup on Telephone Number 1
[6]
Backup on Telephone Number 2
[7]
Backup on Telephone Number 3
[8]
Backup on Telephone Number 4
= Default Setting)
OFF
N
ON
N
N
N
N
N
N
N
Partition 2
[3228]
OFF
N
ON
N
N
N
N
N
N
N
Partition 3
[3328]
OFF
N
ON
N
N
N
N
N
N
N
Partition 4
[3428]
OFF
N
ON
N
N
N
N
N
N
N
Partition 5
[3528]
OFF
N
ON
N
N
N
N
N
N
N
Partition 6
[3628]
OFF
N
ON
N
N
N
N
N
N
N
Partition 7
[3728]
OFF
N
ON
N
N
N
N
N
N
N
Partition 8
[3828]
OFF
N
ON
N
N
N
N
N
N
N
Partition Tamper / Tamper Restore Event Call Direction
Partition 1
[3129]
Option
(
[1]
Call Telephone Number 1
[2]
Call Telephone Number 2
[3]
Call Telephone Number 3
[4]
Call Telephone Number 4
[5]
Backup on Telephone Number 1
[6]
Backup on Telephone Number 2
[7]
Backup on Telephone Number 3
[8]
Backup on Telephone Number 4
= Default Setting)
OFF
ON
N
N
Partition 2
[3229]
OFF
ON
N
N
N
Partition 3
[3329]
OFF
ON
N
N
N
N
N
OFF
N
Partition 8
[3829]
OFF
N
N
N
N
N
N
N
N
N
N
N
ON
N
N
N
N
ON
N
N
N
N
ON
N
N
N
Partition 7
[3729]
N
N
N
N
N
OFF
N
N
N
N
ON
Partition 6
[3629]
N
N
N
N
N
N
N
N
N
OFF
N
N
N
Partition 5
[3529]
ON
N
N
N
N
OFF
N
N
N
Partition 4
[3429]
N
N
N
Digiplex -EVO-
Special Arming Exit Delay
Description
Partition 1
Partition 2
Partition 3
Partition 4
Partition 5
Partition 6
Partition 7
Partition 8
Decimal Values from 000 to 255
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Section
Data
Exit delay for special arming. (Auto arm,
WinLoad/NEWare arming etc.) (Data x
[3130]
__/__/__
[3230]
__/__/__
[3330]
__/__/__
[3430]
__/__/__
[3530]
__/__/__
[3630]
__/__/__
[3730]
__/__/__
[3830]
__/__/__
- 47 -
second; Default = 060)
No Movement Schedule
Programming Guide
Section
Intervals
Start Time (from)
End Time (to)
Days (turn ON or OFF)
S M T W
T
F S H
[3131]
Partition 1
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3231]
Partition 2
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3331]
Partition 3
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3431]
Partition 4
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3531]
Partition 5
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3631]
Partition 6
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3731]
Partition 7
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
[3831]
Partition 8
Schedule A
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
Schedule B
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7 8
The Start and End Time of a schedule cannot cross over into another day. For example, to program a shift from 10PM one day to 6AM the next morning, you must program Schedule A:
Start Time 22:00 and End Time 23:59 then program Schedule B Start Time 00:00 and End Time 06:00. The schedule will not be interrupted between 23:59 and 00:00.
Special and Trouble Report Codes
Ademco slow, Silent Knight fast, SESCOA, Ademco express or Pager formats: Key-in desired 2-digit hex values from 00 to FF.
Ademco format:
Use sections [4034] (Special System Report Codes), [4035] (Special Arming/Disarming Report Codes), [4036] (Special Alarm Report Codes) and [4037]
(Trouble/Trouble Restore Report Codes) to program a set of default Ademco report codes from the Automatic Report Code Programming on page 50. Then
to program the remaining report codes or to change some of the defaults, enter the individual sections and key-in the desired 2-digit hex value found in the
Contact ID Report Code List on page 53.
SIA format:
Use sections [4034] (Special System Report Codes), [4035] (Special Arming/Disarming Report Codes), [4036] (Special Alarm Report Codes) and [4037]
(Trouble/Trouble Restore Report Codes) to program a set of SIA report codes from the Automatic Report Code Programming on page 50. Codes that have
not been set to default can be set to default manually by entering FF in the appropriate section. To disable the reporting of an event, enter 00 in the
appropriate section.
Special System Report Codes
Section
Special Alarm Report Codes
Report Code
Section
Report Code
[3900]
__/__ Power up after total power down
[3930]
__/__ Emergency Panic
[3901]
__/__ Software reset (Watchdog)
[3931]
__/__ Auxiliary Panic
[3902]
__/__ Test Report
[3932]
__/__ Fire Panic
[3903]
__/__ Listen-In to Follow (Request to start session)
[3933]
__/__ Recent Closing
[3904]
__/__ WinLoad Login Request (Callback only)
[3934]
__/__ Police Code
[3905]
__/__ WinLoad Log Off
[3935]
__/__ Zone Shutdown
[3906]
__/__ Installer In
[3936]
__/__ Duress
[3907]
__/__ Installer Out
[3937]
__/__ Keypad Lockout
[3908]
Future Use
[3938]
Future Use
[3909]
Future Use
[3939]
Future Use
Special Arming Report Codes
Section
Trouble Report Codes
Report Code
Section
Report Code
[3910]
__/__ Auto-arming
[3940]
Future Use
[3911]
__/__ PC Arming
[3941]
__/__ AC Failure
[3912]
__/__ Late to Close (Auto-arming)
[3942]
__/__ Battery Failure
[3913]
__/__ No Movement
[3943]
__/__ Auxiliary Supply
[3914]
__/__ Partial Arming
[3944]
__/__ Bell Output (Disconnected or overload)
[3915]
__/__ Quick Arming
[3945]
__/__ Clock Loss
[3916]
__/__ Early to Close (refer to “Arming Report Schedules” on page 42)
[3946]
__/__ Fire Loop Trouble
[3917]
__/__ Late to Close (refer to “Arming Report Schedules” on page 42)
[3947]
Future Use
[3918]
__/__ Remote Arming (APR3-ADM2, DGP-LSN4)
[3948]
Future Use
[3919]
__/__ Closing Delinquency
[3949]
Future Use
[3950]
__/__ Combus Fault
[3951]
__/__ Module Tamper
Report Code
[3952]
__/__ ROM Check Error
[3920]
__/__ Cancel Auto-arm
[3953]
__/__ Module TLM
[3921]
__/__ Quick Disarm
[3954]
__/__ Module Failure to Communicate
[3922]
__/__ PC Disarming
[3955]
__/__ Printer Fault
[3923]
__/__ PC Disarming after alarm
[3956]
__/__ Module AC Failure
[3924]
__/__ Cancel Alarm
[3957]
__/__ Module Battery Failure
[3925]
Future Use
[3958]
__/__ Module Auxiliary Failure
[3926]
__/__ Early to Open (refer to “Disarming Report Schedules” on page 38)
[3959]
Future Use
[3927]
__/__ Late to Open (refer to “Disarming Report Schedules” on page 38)
[3960]
__/__ Wireless Transmitter Battery Low
[3928]
__/__ Remote Disarming (APR3-ADM2, DGP-LSN4)
[3961]
__/__ Wireless Transmitter Supervision Trouble
[3929]
Future Use
[3962]
Future Use
[3963]
Future Use
[3964]
Future Use
[3965]
__/__ Phone Number 1 Fail to Communicate
Special Disarming Report Codes
Section
Digiplex -EVO-
- 48 -
Programming Guide
[3966]
__/__ Phone Number 2 Fail to Communicate
[3978]
Future Use
[3967]
__/__ Phone Number 3 Fail to Communicate
[3979]
Future Use
[3968]
__/__ Phone Number 4 Fail to Communicate
[3980]
__/__ Combus Fault Restore
[3969]
Future Use
[3981]
__/__ Module Tamper Restore
[3982]
__/__ ROM Check Error Restore
[3983]
__/__ Module TLM Restore
Trouble Restore Report Codes
Section
Report Code
[3984]
__/__ Module Failure to Communicate Restore
[3970]
__/__ TLM1 Restore
[3985]
__/__ Printer Fault Restore
[3971]
__/__ AC Failure Restore
[3986]
__/__ Module AC Failure Restore
[3972]
__/__ Battery Failure Restore
[3987]
__/__ Module Battery Failure Restore
[3973]
__/__ Auxiliary Supply Restore
[3988]
__/__ Module Auxiliary Failure Restore
[3974]
__/__ Bell Output (Reconnected or Restored)
[3989]
Future Use
[3975]
__/__ Clock Loss Restore
[3990]
__/__ Wireless Transmitter Battery Low Restore
[3976]
__/__ Fire Loop Trouble Restore
[3991]
__/__ Wireless Transmitter Supervision Trouble Restore
[3977]
Future Use
Other Settings and Modes
Section
[4000]
Description
Display Serial Number of Control Panel and All Modules Connected to the combus:
After entering section [4000], the keypad will display the 8-digit serial number of the control panel and firmware version.
For LCD Keypads: Use the [ ] and [ ] keys to scroll through the serial number of each module connected to the combus. The firmware
version of some modules will be displayed as well.
For Grafica Keypads: Press the center action key (Next) to scroll through the serial number of each module on the combus.
[4001]
Module Reset:
Reset a module’s programmed contents to default by entering its serial number.
[4002]
Locate/Unlocate Module:
Locate a specific module (e.g. detector, zone expander, etc.) connected to the combus by entering the module's serial number. The green
“LOCATE” LED on the module will begin to flash until the serial number is re-entered or the appropriate “tamper” or “unlocate” switch on the
module is pressed.
[4003]
Module Programming Mode:
Enter the serial number of the module you wish to program.
[4004]
Module Broadcast:
Copy the contents of all programming sections from one module to one or more modules of the same type. Enter the serial number of the
source module, followed by the serial numbers of the modules you wish to program. To begin transferring data, press [ACC] on LCD
keypads or the center action key (Start) on Grafica keypads.
Label Broadcast:
Copy user, door and partition labels from the control panel to all keypads and printer modules connected to the combus. To transmit the
labels, in section [4004], enter the control panel’s serial number. From the Destination screen, do not enter a serial number, but press
[ACC] on LCD keypads or the center action key (Start) on Grafica keypads.
PLEASE NOTE: The Module and Label Broadcast feature will only work when a module is broadcasting its data to a module or to
modules of the same type and model number. For example, an APR-PRT1 (Printer Module) cannot broadcast to an APR3-PRT1.
Likewise, a DGP module cannot broadcast to a DGP2 module.
[4005]
[4006]
Quick Module Scanning:
After entering the section, the control panel will scan all addresses assigned to modules. If any missing modules are detected (i.e. detector
removed from the combus), the control panel will erase the module's serial number, removing the module from the control panel's memory.
Modules Scanning:
After entering the section, the control panel will scan all addresses on the combus. If any missing modules are detected (i.e. detector
removed from the combus), the control panel will erase the module's serial number, removing the module from the control panel's memory.
If new modules are detected, the serial number will be entered in the control panel’s memory.
Paradox Memory Key (PMC-5)
[4010]
Download from the Memory Key to the control panel except zone numbering and sections [0501] to [0532]. (See warning on page 50)
[4011]
Download from the Memory Key to control panel including zone numbering and sections [0501] to [0532]. (See warning on page 50)
[4012]
Download user labels from the Memory Key to control panel. (See warning on page 50)
[4013]
Download installer default. (Use for reset from Memory key to control panel.)
[4020]
Copy the control panel sections to the Memory Key except zone numbering and sections [0501] to [0532]. (See warning on page 50)
[4021]
Copy the control panel sections to the Memory Key including zone numbering and sections [0501] to [0532]. (See warning on page 50)
Digiplex -EVO-
- 49 -
Programming Guide
[4022]
Copy the control panel user label to the Memory Key. (See warning on page 50)
[4023]
Copy the control panel installer default to the Memory key.
Cannot overwrite
content
Can copy and
download content
Download Memory Key to Control Panel.
1) Insert the Memory Key (PMC-5) onto the control panel’s connector labelled “MEM KEY”.
2) To download the contents of the Memory Key except zone numbering and sections [0501] to [0532], enter installer programming mode
and then enter section [4010]. (Depending on the memory key, the labels may or may not be included.)
To download the contents of the Memory Key including zone numbering and sections [0501] to [0532], enter installer programming
mode and then enter section [4011].(Depending on the memory key, the labels may or may not be included.)
3) When the keypad emits a confirmation beep, remove the Memory Key.
Copy Control Panel to Memory Key
1) Insert Memory Key (PMC-5) onto the control panel’s connector labelled “MEM KEY”. Ensure the write protect jumper on the memory
key is on.
2) To copy the contents to the Memory Key except zone numbering and sections [0501] to [0532], enter installer programming mode,
then enter section [4020]. (Depending on the memory key, the labels may or may not be included.)
To copy the contents to the Memory Key including zone numbering and sections [0501] to [0532], enter section [4021].
(Depending on the memory key, the labels may or may not be included.)
3) After the confirmation beep, remove the Memory Key. Remove the Memory Key’s jumper if you do not wish to accidentally overwrite
its contents.
When using the PMC-3 Memory Key, sections [4010], [4011], [4020] and [4021] will NOT include the labels. Use sections [4012] and [4022]
to transfer labels only using a PMC-4 or PMC-5.
Automatic Report Code Programming
When using Contact ID or SIA Reporting formats (section [3070] on page 36), default report codes can be programmed automatically. After automatic
defaults are set, they can be changed and the remaining report codes can be set manually.
Section
[4030]
Description
ALL REPORT CODES RESET TO 00
Resets all the report codes from sections [0201] to [0296], [0701] to [0832],
[2001] to [2199] and [3900] to [3999] to 00.
Sections [4031] to [4037] reset all the report codes in the following sections to
the default values from the “Automatic Report Codes List” on page 47.
[4031]
ALL REPORT CODES RESET TO FF
[0201] to [0296], [0701] to [0832], [2001] to [2199] & [3900] to [3999]
[4032]
ZONE ALARM/ALARM RESTORE AND ZONE TAMPER/TAMPER [0201] to [0296]
RESTORE REPORT CODES
[4033]
USER/KEYSWITCH ARMING & DISARMING REPORT CODES [0701] to [0832], and [2001] to [2199]
[4034]
SPECIAL CODES
[3900] to [3909]
[4035]
SPECIAL ARMING/DISARMING REPORT CODES
[3910] to [3929]
[4036]
SPECIAL ALARM REPORT CODES
[3930] to [3939]
[4037]
TROUBLE & TROUBLE RESTORE REPORT CODES
[3940] to [3999]
Software Reset
Performing a software reset will set certain parameters to default values. To do so:
1) Enter Programming Mode (see Entering Programming Mode on page 3).
2) Enter Section [4049] to unlock software reset.
3) Enter the 4-digit [SECTION] corresponding to the software reset you wish to perform.
4) If you want to reset more than one section, enter section [4049] to unlock the software reset again.
Digiplex -EVO-
- 50 -
Programming Guide
Section
Description
[4040]
Entering this section will reset all programmable sections from [0001] to [3999] to factory default values.
[4041]
Entering this section will reset the system master code to 123456.
[4042]
Entering this section will reset all Zone programming (including sections [0961] to [0984]) programming to default values.
[4043]
Entering this section will reset all access control sections from [2201] to [2712], excluding door labels, to default values.
[4044]
Entering this section will reset all user code sections from [1001] to [1999] and [2001] to [2199] to default values.
[4045]
Entering this section will reset all dialer (sections [3051] to [3081]), VDMP3 (sections [3087] to [3098]) and control panel (sections [3020] to
[3043], and [3900] to [3991]) programming to default values.
[4046]
Entering this section will reset all partition sections from [3101] to [3833], excluding partition labels, to default values.
[4047]
Entering this section will reset all PGM (sections from [0901] to [0959]) and all Keyswitch (sections [0501] to [0632]) programming, as well
as all Keyswitch arming/disarming report codes (sections from [0701] to [0832]) to default values.
[4048]
Entering this section will clear all user labels, door labels, partition labels, module labels and zone labels from sections [0301] to [0396].
[4049]
Entering this section will unlock software reset for sections [4040] to [4048].
Installer Function Keys
To access the installer functions, press and hold the [0] key, enter the [INSTALLER CODE], and then:
For LCD keypads: press the key indicated in the list below that corresponds to the function you wish to activate.
For Grafica keypads: press the center action key (Options), highlight the desired function and then press the center action key (Ok).
[STAY]
Test Report: Sends the “Test Report” report code programmed in section [3902] to the monitoring station.
[FORCE]
Call WinLoad Software: Will dial the PC telephone number programmed in section [3010] in order to initiate communication with a computer
using the WinLoad software.
[ARM]
Answer WinLoad Software: Will force the control panel to answer a call made by the Monitoring Station that is using the WinLoad software.
[DISARM]
Cancel Communication: Cancels all communication with the WinLoad software or with the Monitoring Station until the next reportable event.
[MEM]
Installer Test Mode: The installer test mode will allow you to perform walk tests where the bell or siren will squawk to indicate opened zones.
Press the [MEM] button again to exit. Partitions cannot be armed if the Installer Test Mode is enabled.
[TRBL]
Start Module Scan: The keypad will display the serial number of each module on the combus.
[ACC]
Combus Voltmeter: To verify if the combus is supplying sufficient power, press and hold the [0] key, enter the [INSTALLER CODE] and press the
[ACC] button. A reading of 12.3V or lower at the panel’s service keypad connector indicates that the voltage is too low. The voltage may drop
during the control panel battery test.
Automatic Report Code List
System Event
Default Contact ID Report Code
when using sections [4032] to [4037]
Default SIA Report Code
when using sections [4032] to [4037]
Arming with Master Code (##)
Arming with User Code (##)
Arming with Keyswitch (##)
Auto Arming
Arm with PC software
Late To Close
No Movement
Partial arming
Quick arming
Remote Arm (voice)
Delinquency Closing
3 4A1 - Close by user
3 4A1 - Close by user
3 4A9 - Keyswitch Close
3 4A3 - Automatic Close
3 4A7 - Remote arm/disarm
3 452 - Late to Close
3 452 - Late to Close
1 456 - Partial Arm
3 4A8 - Quick arm
3 4A7 - Remote Arm
1 654 - System Inactivity
CL - Closing Report
CL - Closing Report
CS - Closing Keyswitch
CA - Automatic Closing
CQ - Remote Arming
OT - Late to Close
NA - No Movement Arming
CG - Close Area
CL - Closing Report
CQ - Arm with Voice Module
CD - System Inactivity
Disarm with Master Code (##)
Disarm with User Code (##)
Disarm with Keyswitch (##)
Disarm after alarm with Master Code (##)
Disarm after alarm with User Code (##)
Disarm after alarm with Keyswitch (##)
Cancel alarm with Master Code (##)
Cancel alarm with User Code (##)
Cancel alarm with Keyswitch (##)
1 4A1 - Open by user
1 4A1 - Open by user
1 4A9 - Keyswitch Open
1 4A1 - Open by user
1 4A1 - Open by user
1 4A9 - Keyswitch Open
1 4A6 - Cancel
1 4A6 - Cancel
1 4A6 - Cancel
OP - Opening Report
OP - Opening Report
OS - Opening Keyswitch
OP - Opening Report
OP - Opening Report
OS - Opening Keyswitch
OR - Disarm From Alarm
OR - Disarm From Alarm
OS - Opening Keyswitch
Auto Arming Cancellation
1 464 - Auto-Arm Time Extended
CE - Closing Extend
Digiplex -EVO-
- 51 -
Programming Guide
System Event
Default Contact ID Report Code
when using sections [4032] to [4037]
Default SIA Report Code
when using sections [4032] to [4037]
Cancel Alarm with PC Software
Voice Disarm
Disarm with PC software
Disarm after an alarm with PC software
Quick Disarm
1 4A6 - Cancel
1 4A7 - Remote arm/disarm
1 4A7 - Remote arm/disarm
1 4A7 - Remote arm/disarm
1 4A8 - Quick Disarm
OR - Disarm From Alarm
OQ - Remote Disarming
OQ - Remote Disarming
OQ - Remote Disarming
OP - Opening Report
Zone Bypassed (##)
Zone alarm (##)
Fire alarm (##)
Early to Disarm by User
Late to Disarm by User
Zone alarm restore (##)
Fire alarm restore (##)
24Hr Gas alarm (##)
24Hr Heat alarm (##)
24Hr Water alarm (##)
24Hr Freeze alarm (##)
24Hr Gas alarm restore (##)
24Hr Heat alarm restore (##)
24Hr Water alarm restore (##)
24Hr Freeze alarm restore (##)
1 57A - Zone bypass
1 13A - Burglary Alarm
1 11A - Fire alarm
1 451 - Early to Open
1 452 - Late to Open
3 13A - Burglary Alarm Restore
3 11A - Fire alarm Restore
1 13A - Burglary Alarm
1 13A - Burglary Alarm
1 13A - Burglary Alarm
1 13A - Burglary Alarm
3 13A - Burglary Alarm Restore
3 13A - Burglary Alarm Restore
3 13A - Burglary Alarm Restore
3 13A - Burglary Alarm Restore
UB - Untyped Zone Bypass
BA - Burglary Alarm
FA - Fire Alarm
OK - Early to Open
OJ - Late to Open
BH - Burglary Alarm Restore
FH - Fire Alarm Restore
GA - Gas Alarm
KA - Heat Alarm
WA - Water Alarm
ZA - Freeze Alarm
GR - Gas Alarm Restore
KR - Heat Alarm Restore
WR - Water Alarm Restore
ZR - Freeze Alarm Restore
Panic 1 - Emergency
Panic 2 - Medical
Panic 3 - Fire
1 12A - Panic alarm
1 1AA - Medical alarm
1 115 - Pull Station
PA - Panic Alarm
MA - Medical Alarm
FA - Fire Alarm
Recent closing
Police Code
Global zone shutdown
Duress alarm
Zone shutdown (##)
3 459 - Recent Close
1 139 - Burglary Alarm
1 574 - Group bypass
1 121 - Duress
1 57A - Zone bypass
CR - Recent Closing
BM - Burglary Alarm
CG - Close Area
HA - Hold-up Alarm
UB - Untyped Zone Bypass
Zone tampered (##)
Zone tamper restore (##)
Keypad Lockout
1 144 - Sensor tamper
3 144 - Sensor tamper restore
1 421 - Access denied
TA - Tamper Alarm
TR - Tamper Restoral
JA - User Code Tamper
AC Failure
Battery Failure
Auxiliary supply trouble
Bell output current limit
Bell absent
Clock lost
Fire loop trouble
1 3A1 - AC loss
1 3A9 - Battery test failure
1 3AA - System trouble
1 321 - Bell 1
1 321 - Bell 1
1 626 - Time/Date inaccurate
1 373 - Fire trouble
AT - AC Trouble
YT - System Battery Trouble
YP - Power Supply Trouble
YA - Bell Fault
YA - Bell Fault
JT - Time Changed
FT - Fire Trouble
TLM trouble restore
AC Failure restore
Battery Failure restore
Auxiliary supply trouble restore
Bell output current limit restore
Bell absent restore
Clock programmed
Fire loop trouble restore
3 351 - Telco 1 fault restore
3 3A1 - AC loss restore
3 3A9 - Battery test restore
3 3AA - System trouble restore
3 321 - Bell 1 restore
3 321 - Bell 1 restore
3 625 - Time/Date Reset
3 373 - Fire trouble restore
LR - Phone Line restoral
AR - AC Restoral
YR - System Battery Restoral
YQ - Power Supply restored
YH - Bell Restored
YH - Bell Restored
JT - Time Changed
FJ - Fire Trouble Restore
Combus fault
Module tamper
Module ROM_RAM_error
Module TLM trouble
Module fail to communicate to monitoring station
Printer fault
Module AC Failure
Module battery failure
Module Auxiliary supply trouble
1 333 - Expansion module failure
1 145 - Expansion module tamper
1 3A4 - Rom checksum bad
1 352 - Telco 2 fault
1 354 - Fail to communicate
1 336 - Local printer failure
1 3A1 - AC loss
1 3A9 - Battery test failure
1 3AA - System trouble
ET - Expansion Trouble
TA - Tamper Alarm
YF - Parameter Checksum Fail
LT - Phone Line trouble
YC - Communication Fails
VT - Printer Trouble
AT - AC Trouble
YT - System Battery Trouble
YP - Power Supply Trouble
Combus fault restore
Module tamper restore
Module ROM_RAM_error restore
3 333 - Expansion module failure restore
3 145 - Expansion module tamper restore
3 3A4 - Rom checksum bad restore
ER - Expansion Restoral
TR - Tamper Restoral
YG - Parameter Changed
Digiplex -EVO-
- 52 -
Programming Guide
System Event
Default Contact ID Report Code
when using sections [4032] to [4037]
Default SIA Report Code
when using sections [4032] to [4037]
Module TLM restore
Early to Arm by User
Late to Arm by User
Zone Excluded on Force Arming
Zone Went Back to Arm Status
Printer fault restore
Module AC restore
Module battery restore
Module Auxiliary supply restore
3 352 - Telco 2 fault restore
3 451 - Early to Close
3 452 - Late to Close
1 57A - Zone Bypass
3 57A - Zone Bypass Restore
3 336 - Local printer failure restore
3 3A1 - AC loss restore
3 3A9 - Battery test failure restore
3 3AA - System trouble restore
LR - Phone Line Restoral
CK - Early to Close
CJ - Late to Close
XW - Zone Forced
VV - Zone Included
VR - Printer Restore
AR - AC Restoral
YR - System Battery Restoral
YQ - Power Supply Restored
Fail to communicate with monitoring station
Module RF low battery
Module RF supervision trouble
Module RF battery restore
Module RF supervision restore
1 354 - Fail to communicate
1 384 - RF transmitter low battery
1 381 - Loss of supervision - RF
3 384 - RF transmitter battery restore
3 381 - Supervision restore - RF
YC - Communication Fails
XT - Transmitter Battery Trouble
US - Untype Zone Supervision
XR - Transmitter Battery Restoral
UR - Untyped Zone Restoral
Cold Start
Warm Start
Test Report engaged
Listen-In request
WinLoad Login request
PC software communication finished
Installer on site
Installer programming finished
Module Fail to Communicate Restore
1 3A8 - System shutdown
1 3A5 - System reset
1 6A2 - Periodic test report
1 606 - Listen-In to follow
1 411 - Call Back Request
1 412 - Successful - download access
1 627 - Program mode Entry
1 628 - Program mode Exit
3 354 - Fail to Communicate Restore
RR - Power Up
YW - Watchdog Reset
TX - Test Report
LF - Listen-In to follow
RB - Remote Program Begin
RS - Remote Program Success
LB - Local Program
LS - Local Program Success
YK - Communication Restore
Contact ID Report Code List
If using the Ademco Contact ID format, key in the 2-digit hexadecimal value (PROG. VALUE) to program the desired report codes into sections [0201] to
[0296], [0701] to [0832], [2001] to [2199], and [3900] to [3999].
CID#
Reporting Code
MEDICAL ALARMS - 100
100 Medical Alarm
101 Personal Emergency
102 Fail to Report In
FIRE ALARMS - 110
110 Fire Alarm
111 Smoke
112 Combustion
113 Water Flow
114 Heat
115 Pull Station
116 Duct
117 Flame
118 Near Alarm
PANIC ALARMS - 120
120 Panic Alarm
121 Duress
122 Silent
123 Audible
124 Duress-Access Granted
125 Duress-Egress Granted
Prog.
CID#
Reporting Code
Value
BURGLAR ALARMS - 130
01
130 Burglary
02
131 Perimeter
03
132 Interior
133 24-Hour
04
134 Entry/Exit
05
135 Day/Night
06
136 Outdoor
07
137 Tamper
08
138 Near Alarm
09
139 Intrusion Verifier
0A GENERAL ALARMS - 140
0B
140 General Alarm
0C
141 Polling Loop Open
142 Polling Loop Short
0D
143 Expansion Module Failure
0E
144 Sensor Tamper
0F
145 Expansion Module Tamper
10
146 Silent Burglary
11
147 Sensor Supervision Failure
12
24-HOUR NON-BURGLARY - 150 & 160
Digiplex -EVO-
- 53 -
Prog.
CID#
Reporting Code
Value
150 24-Hour Non-Burglary
13
151 Gas Detected
14
152 Refrigeration
15
153 Loss of Heat
16
154 Water Leakage
17
155 Foil Break
18
156 Day Trouble
19
157 Low Bottled Gas Level
1A
158 High Temperature
1B
159 Low Temperature
1C
161 Loss of Air Flow
162 Carbon Monoxide Detected
1D
163 Tank Level
1E FIRE SUPERVISORY - 200 & 210
1F
200 Fire Supervisory
20
201 Low Water Pressure
21
202 Low CO2
22
203 Gate Valve Sensor
23
204 Low Water Level
24
205 Pump Activated
206 Pump Failure
Programming Guide
Prog.
Value
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
CID#
Reporting Code
SYSTEM TROUBLES - 300 & 310
300 System Trouble
301 AC Loss
302 Low System Battery
303 RAM Checksum Bad
304 ROM Checksum Bad
305 System Reset
306 Panel Program Changed
307 Self-Test Failure
308 System Shutdown
309 Battery Test Failure
310 Ground Fault
311 Battery Missing/Dead
312 Power Supply Over Current
313 Engineer Reset
Prog.
CID#
Reporting Code
Value
378 Cross-Zone Trouble
39 SENSOR TROUBLES - 380
3A
380 Sensor Trouble
3B
381 Loss of Supervision - RF
3C
382 Loss of Supervision - RPM
3D
383 Sensor Tamper
3E
384 RF Transmitter Low Battery
3F
385 Smoke Detector Hi Sensitivity
40
386 Smoke Detector Low Sensitivity
41
387 Intrusion Detector Hi Sensitivity
42
388 Intrusion Detector Low Sensitivity
43
389 Sensor Self-Test Failure
44
391 Sensor Watch Trouble
45
392 Drift Compensation Error
46
393 Maintenance Alert
SOUNDER/RELAY TROUBLES - 320
320 Sounder Relay
OPEN/CLOSE - 400
47
400 Open/Close
321 Bell 1
48
401 Open/Close by User
322 Bell 2
49
402 Group Open/Close
323 Alarm Relay
4A
403 Automatic Open/Close
324 Trouble Relay
4B
406 Cancel
325 Reversing Relay
4C
407 Remote Arm/Disarm
326 Notification Appliance chk. #3
4D
408 Quick Arm
327 Notification Appliance chk. #4
4E
409 Keyswitch Open/Close
SYSTEM PERIPHERAL TROUBLES - 330 & 340 REMOTE ACCESS - 410
330 System Peripheral
4F
411 Callback Request Made
331 Polling Loop Open
50
412 Successful - Download Access
332 Polling Loop Short
51
413 Unsuccessful Access
333 Expansion Module Failure
52
414 System Shutdown
334 Repeater Failure
53
415 Dialer Shutdown
335 Local Printer Paper Out
54
416 Successful Upload
336 Local Printer Failure
55
ACCESS CONTROL - 420
337 Exp. Module DC Low
56
421 Access Denied
338 Exp. Module Low Batt
57
422 Access Report By User
339 Exp. Module Reset
58
423 Forced Access
341 Exp. Module Tamper
59
424 Egress Denied
342 Exp. Module AC Lost
5A
425 Egress Granted
343 Exp. Module Self-Test Fail
5B
426 Access Door Propped Open
Access Point Door Status Monitor
344 RF Receiver Jam Detected
5C
427
trouble
COMMUNICATION TROUBLES - 350 & 360
350 Communication
351 Telco Fault 1
352 Telco Fault 2
353 Long Range Radio
354 Fail to Communicate
355 Loss of Radio Supervision
356 Loss of Central Polling
357 Long Range Radio VSWR problem
PROTECTION LOOP TROUBLES - 370
370 Protection Loop
371 Protection Loop Open
372 Protection Loop short
373 Fire Trouble
374 Exit Error Alarm
375 Panic Zone Trouble
376 Hold-up Zone Trouble
377 Swinger Trouble
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
Prog.
Prog.
CID#
Reporting Code
Value
Value
6D
458 User on Premises
A1
459 Recent Close
A2
6E
461 Wrong Code Entry
A3
6F
462 Legal Code Entry
A4
70
463 Re-arm after Alarm
A5
71
464 Auto-Arm Time Extended
A6
72
465 Panic Alarm Reset
A7
73
466 Service On/Off Premises
A8
74
SOUNDER RELAY DISABLES - 520
75
520 Sounder/Relay Disabled
A9
76
521 Bell 1 Disable
AA
77
522 Bell 2 Disable
AB
78
523 Alarm Relay Disable
AC
79
524 Trouble Relay Disable
AD
7A
525 Reversing Relay Disable
AE
Notification Appliance chk. #3
AF
526
Disabled
Notification Appliance chk. #4
B0
7B
527
Disabled
7C
531 Module Added
B1
7D
532 Module Removed
B2
7E COMMUNICATION DISABLED - 550 & 560
7F
551 Dialer Disabled
B3
80
552 Radio Transmitter Disabled
B4
81
BYPASSES - 570
82
570 Zone Bypass
B5
571 Fire Bypass
B6
83
572 24-Hour Zone Bypass
B7
84
573 Burglary Bypass
B8
85
574 Group Bypass
B9
86
575 Swinger Bypass
BA
87
576 Access Zone Shunt
BB
88
577 Access Point Bypass
BC
TEST/MISC. - 600
89
601 Manual Trigger Test
BD
8A
602 Periodic Test Report
BE
8B
603 Periodic RF Transmission
BF
8C
604 Fire Test
C0
8D
605 Status Report to Follow
C1
8E
606 Listen-in to Follow
C2
8F
607 Walk Test Mode
428 Access Point Request to Exit
90
608
429 Access Program Mode Entry
430 Access Program Mode Exit
431 Access Threat Level Change
432 Access Relay/Trigger Fail
433 Access RTE Shunt
434 Access DSM Shunt
441 Armed Stay
442 Keyswitch Armed Stay
SPECIAL TROUBLES - 450 & 460
450 Exception Open/Close
451 Early Open/Close
452 Late Open/Close
453 Failed to Open
454 Failed to Close
455 Auto-Arm Failed
456 Partial Arm
457 User Exit Error
91
92
93
94
95
96
97
98
609
611
612
613
614
615
616
621
622
623
624
625
626
627
628
629
630
Digiplex -EVO-
- 54 -
99
9A
9B
9C
9D
9E
9F
A0
Programming Guide
Periodic Test - System Trouble
Present
Video Xmitter Active
Point Test Ok
Point Not Tested
Intrusion Zone Walk Tested
Fire Zone Walk Tested
Panic Zone Walk Tested
Service Request
Event Log Reset
Event Log 50% Full
Event Log 90% Full
Event Log Overflow
Time/Date Reset
Time/Date Inaccurate
Program Mode Entry
Program Mode Exit
32 Hour Event Log Marker
Schedule Change
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
D0
D1
D2
D3
D4
D5
VDMP3 Installation Instructions
VDMP3 Installation Instructions
Step
EVO
section
VDMP3 Installation Diagram
English
Attach support
pin to EVO
panel and
VDMP3
• Power down the EVO control panel.
• Install the VDMP3 directly on the EVO control panel’s
DIALER and EBUS connectors as shown in "VDMP3
Installation Diagram"
• Power up the EVO control panel.
1
Install
VDMP3
VDMP3 Setup Instructions
Step
1
Enable
Functions
2
Telephone
Numbers
3
Enable
Numbers
EVO
section
[3090]
[3091]
to
[3098]
[3133]
to
[3833]
4
Answering
Machine
Override
[3052]
5
Enable
Features
(PGM)
8
Delay
Before Next
Number
9
Ring
Counter
Program up to 8 telephone numbers which will be called in
sequence in the event of an alarm. Telephone numbers
should be programmed in priority sequence as the VDMP3
will start with telephone number 1. For extra key functions,
see Special Telephone Number Keys on page 40.
[3091] Telephone number 1
[3095] Telephone number 5
[3092] Telephone number 2
[3096] Telephone number 6
[3093] Telephone number 3
[3097] Telephone number 7
[3094] Telephone number 4
[3098] Telephone number 8
Choose which telephone numbers will be enabled for each
partition in your system. Options [1] to [8] represent
telephone numbers 1 through 8.
(Default: Telephone number 1 is enabled for all partitions.)
[3133] Partition 1 [1] to [8]
[3533] Partition 5 [1] to [8]
[3233] Partition 2 [1] to [8]
[3633] Partition 6 [1] to [8]
[3333] Partition 3 [1] to [8]
[3733] Partition 7 [1] to [8]
[3433] Partition 4 [1] to [8]
[3833] Partition 8 [1] to [8]
If the VDMP3 uses a telephone line that is connected to an
answering machine or service, the Answering Machine
Override must be programmed. The value programmed in
section [3052] represents the delay period that the VDMP3
will wait between the first and second call. The user must
call the VDMP3, hang up, and then call back within the
value programmed in section [3052]. The module then
overrides the answering machine or service by picking up
the line on the first ring.
000 to 225 seconds (default 008)
Note: Changing these values will also affect PC
communication via WinLoad software.
Connect VDMP3
to EBUS and
DIALER
Connect 307USB /
CONV4USB (WinLoad /
NEware) to SERIAL
Feature Activation (PGMs)
Using the VDMP3, it is possible to activate the PGM utility keys or PGM
groups that are programmed in the EVO panel.
VDMP3 feature numbers do not necessarily correspond to EVO utility key
numbers.
For example:
Features in this section correspond to utility key PGMs in the
EVO control panel. For more information, see Feature
Activation (PGMs).
VDMP3 Feature
EVO Utility Key
VDMP3 Feature
EVO Utility Key
Feature 1 ON
Utility Key 1
Feature 5 ON
Utility Key 9
Feature 1 OFF
Utility Key 2
Feature 5 OFF
Utility Key 10
Feature 2 ON
Utility Key 3
Feature 6 ON
Utility Key 11
Feature 2 OFF
Utility Key 4
Feature 6 OFF
Utility Key 12
Feature 3 ON
Utility Key 5
Feature 7 ON
Utility Key 13
[3087]
Options [1] to [8] represent features 1 to 8 (default: OFF)
Feature 3 OFF
Utility Key 6
Feature 7 OFF
Utility Key 14
Feature 4 ON
Utility Key 7
Feature 8 ON
Utility Key 15
Feature 4 OFF
Utility Key 8
Feature 8 OFF
Utility Key 16
[3088]
After the VDMP3 dials a phone number, it waits the
programmed delay period before sending the voice
message. The value programmed in section [3088]
represents the length of time the VDMP3 will wait before
playing the message.
000 to 127 seconds (default 003)
6
Message
Delay
7
Message
Repetitions
English
Select the following options to enable voice reporting and
arm/disarm function.
[1] Arm/disarm
(default 1 and 2 ON)
[2] Voice reporting
Set the number of times the VDMP3 will play the voice
message.
[3089]
000 to 008 repetitions (default 008)
If the utility key in the EVO panel is programmed with a timer, the
VDMP3 will not recognize PGM deactivation when the set timer
elapses. As a result, the VDMP3 may indicate that the PGM is ON
when actually the timer has elapsed and the PGM is in fact OFF
Set the delay before the VDMP3 attempts to dial the next
number on the list.
[3054]
[3051]
000 to 255 seconds (default 020)
Note: Changing these values will also affect regular
reporting to monitoring station.
Set the number of rings the VDMP3 will wait before the call
is answered.
000 to 008 rings (default 008)
Note: Changing these values will also affect PC
communication via WinLoad software.
Digiplex -EVO-
- 55 -
Programming Guide
LCD Keypad Programming
The keypad’s serial number can be found on the keypad’s PC board. The keypad’s serial number can also be viewed by pressing and holding the [0] key,
entering the [INSTALLER CODE] and then entering section [0000] The version of the keypad’s firmware can also be seen in that section.
= Default setting
SECTION [001] : Keypad Partition Assignment
Option
[1]
SECTION [002]: Assigning Doors to Partitions †
OFF
Partition 1
[2]
Partition 2
[3]
Partition 3
[4]
Partition 4
[5]
Partition 5
[6]
Partition 6
[7]
Partition 7
[8]
Partition 8
N Disabled
ON
N Disabled
N Disabled
N Disabled
N Disabled
N Disabled
N Disabled
N Disabled
Option
Door Assigned to Partition1
N Disabled
Enabled
[2]
Door Assigned to Partition 2
Disabled
Enabled
[3]
Door Assigned to Partition 3
Disabled
Enabled
[4]
Door Assigned to Partition 4
Disabled
Enabled
[5]
Door Assigned to Partition 5
Disabled
Enabled
[6]
Door Assigned to Partition 6
Disabled
Enabled
[7]
Door Assigned to Partition 7
Disabled
Enabled
[8]
Door Assigned to Partition 8
Disabled
OFF
ON
Option
N Enabled
Mute Keypad
[2]
Exit Delay Beep
[3]
Door Left Open Pre-Alarm †
[4]
Chime on Zone Closure
N N/A
[5]
Door Left Open Alarm Feedback †
[6]
Door Left Open Alarm Follows †
N N/A
[7]
Door Forced Alarm †
[8]
Door Forced Alarm †
Disabled
[2]
Display exit delay
Disabled
[3]
Display entry delay
Disabled
[4]
Confidential Mode
(not for UL installations)
Disabled
N Enabled
[5]
To exit Confidential Mode
Enter code
[6]
Future Use
N N/A
N Press Button
[7]
Future Use
N N/A
[8]
Time display option
N Enabled
N Enabled
yy/mm/dd
N dd/mm/yy
SECTION [005] : Beep on Trouble
Disabled
N Disabled
N Disabled
Disabled
N Silent
Alarm
restore
N Silent
Alarm
restore
ON
Disabled
N Enabled
Option
OFF
[1]
PGM State‡
N.O.
PGM Deactivation Mode‡
Deactivation
Event
[2]
Communicator Trouble Beep
Disabled
N Enabled
[2]
[3]
Module & Combus Trouble Beep
Disabled
N Enabled
[3]
PGM Base Time‡
1 second
[4]
All Zone Trouble Beep
[4]
PGM Override‡
Disabled
[5]
Keypad Tamper
Disabled
[5] to [6] Future Use
[7]
Time Format
[8]
Audible Feedback on Access
Request*
NEnabled
NEnabled
NEnabled
NEnabled
NEnabled
NEnabled
NEnabled
ON
N Enabled
Enabled
Enabled
N Enabled
Audible
N Beep Timer
Audible
N Beep Timer
SECTION [006]: PGM and Tamper Options
OFF
System & Clock Trouble Beep
OFF
[1]
Display code entry
[1]
Enabled
SECTION [004]: General Options 2
[1]
Option
ON
[1]
SECTION [003]: General Options 1
Option
OFF
Enabled
Disabled
N N/A
N Enabled
N N/A
24Hr clock N 12Hr clock
N Disabled
[6] to [8] Future Use
Enabled
* Section/option is only available with EVO641 / EVO641R keypads
† Section/option is only available with LCD keypad with built-in reader
‡ Section/option is only available with standard LCD keypad
Digiplex -EVO-
- 56 -
Programming Guide
N N/A
ON
N N.C.
N PGM Timer
N 1 minute
N Enabled
N Enabled
N N/A
SECTION [006]: General Options 3 (EVO641R only)
Option
OFF
[1]
Card Activates Door Unlocked Schedule
[2]
Door Left Open Alarm
[3]
Door Forced Open Alarm
[4]
Future Use
[5]
Keypad Tamper
[6]
Relock Door
[7]
Future Use
[8]
Unlock on REX
Section
ON
N Disabled.
Enabled
N Enabled
Disabled
Disabled
N Enabled
Disabled
N Enabled
N N/A
N N/A
After Opening N After Closing
N N/A
N N/A
N Enabled
Disabled
Data
Description
Default
[007]
__/__/__ (005 to 255 seconds)
Confidential Mode Timer
120
[008]
__/__/__ (000 to 255; see option [3] in section [006])
PGM Timer ‡
005
[008]
__/__/__ (000 to 255 seconds)
Door Unlocked Period †
005
[009]
__/__/__ (000 to 255 seconds added to section [008])
Door Unlocked Period Extension †
015
[010]
__/__/__ (000 to 255 seconds)
Door Left Open Interval †
060
[011]
__/__/__ (000 to 25 seconds)
Door Left Open Pre-Alarm Timer †
015
[012]
__/__/__ (000 to 25 seconds)
Beep Timer for Door Left Open Alarm †
005
[013]
__/__/__ (000 to 25 seconds)
Beep Timer for Door Forced Open Alarm †
005
† Section/option is only available with LCD keypad with reader.
‡ Section/option is only available with LCD keypads.
Section [017]
Door Unlocked Schedule (EVO641R only)
Start Time
End Time
Days (turn ON or OFF)
S
M T
W T
F
S
H
Schedule A:
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7
8
Schedule B:
___ ___ : ___ ___
___ ___ : ___ ___
1
2
3
4
5
6
7
8
SECTION [018]: Beeping Assignment*
Option
OFF
[1]
Partition 1
[2]
Partition 2
[3]
Partition 3
[4]
Partition 4
[5]
Partition 5
[6]
Partition 6
[7]
Partition 7
[8]
Partition 8
N Mute
ON
Audible
N Mute
Audible
N Mute
Audible
N Mute
Audible
N Mute
Audible
N Mute
Audible
N Mute
Audible
N Mute
Audible
*Available only with EVO641 / EVO641R keypads.
Event Group
Section
Feature Group
Section
Start #
Section
End #
Section
PGM Activation
[009]
__/__/__
[010]
__/__/__
[011]
__/__/__
[012]
__/__/__
PGM Deactivation
[013]
__/__/__
[014]
__/__/__
[015]
__/__/__
[016]
__/__/__
All Event Groups except groups 064 to 067 can be used to program the module’s PGM. See “Programmable Outputs” on page 21.
Digiplex -EVO-
- 57 -
Programming Guide
Message Programming
Each section from [101] to [148], [200] to [204] and [301] to [396] contains one message with a maximum of 16 characters. The sections contain the
following messages:
Sections [101] to [148] = “Zone 01” to “Zone 48” respectively
Section [200] = “Paradox Security”
Sections [201] to [204] = “First Area”, “Second Area”, “Third Area”, and “Fourth Area”
Sections [301] to [396] = “Code 01” to “Code 96” respectively
After entering the section corresponding to the desired message, the message can be re-programmed to suit your installation needs as detailed in
Table 2. For example, section [101] “Zone 01” can be changed to “FRONT DOOR”.
Table 2: Message Programming Special Function Keys
Key
[STAY]
[FORCE]
[ARM]
Function
Details
Insert Space
Press the [STAY] key to insert a blank space at the current cursor’s position.
Delete
Press the [FORCE] key to delete the character or blank space found at the current cursor’s position.
Delete Until the End
Press the [ARM] key to delete all characters and spaces to the right of the cursor and at the cursor’s position.
[DISARM] Numeric/Alphanumeric
Press the [DISARM] key to toggle the numeric keys to alphanumeric keys and vice versa. Numeric: Keys [0] to [9]
represent numbers 0 to 9. Alphanumeric: refer to Table 3 below.
[BYP]
Lower/Upper Case
Press the [BYP] key to toggle from lower to upper case and vice versa.
[MEM]
Special Characters
After pressing the [MEM] key, the cursor will turn into a flashing black square. Using Table 4 below, enter the 3-digit
number for the desired character.
Table 3: Alphanumeric Keys
Key
Press Key Once
Press Key Twice
Press Key Three Times
[1]
A
B
C
[2]
D
E
F
[3]
G
H
I
[4]
J
K
L
[5]
M
N
O
[6]
P
Q
R
[7]
S
T
U
[8]
V
W
X
[9]
Y
Z
Table 4: Special Characters
Digiplex -EVO-
- 58 -
Programming Guide
Using the Memory Key
[510]
Download all from the Memory Key (LCD keypad sections [001] to [396] and all labels and messages) to the LCD keypad.
[520]
Copy the LCD keypad sections [001] to [396] and all labels and messages to the Memory Key.
Download Contents of the Memory Key to the LCD Keypad
1) Insert the Memory Key onto the keypad’s connector labelled “KEY”.
2) To download the contents of the Memory Key, enter the keypad’s programming mode and enter section [510].
3) Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the Memory Key.
Copy Contents of the LCD Keypad to the Memory Key
1) Insert Memory Key onto the keypad’s connector labelled “KEY”. Ensure that the write protect jumper is on (refer to Using the
Memory Key below).
2) To copy the contents to the Memory Key, enter the keypad’s programming mode and enter section [520].
3) Once the keypad emits a confirmation beep, wait for a second confirmation beepl and then remove the Memory Key. Remove
the Memory Key’s jumper if you do not wish to accidentally overwrite its contents.
Memory Key (PMC-5)
Cannot overwrite
content
Can copy and
download content
The memory key will only function with a keypad that has the DGP2 or DNE prefix in the model number. Only the PMC-4 or PMC-5
memory key will function with DGP2 and DNE keypads.
Combus Voltmeter
To verify if the combus is supplying sufficient power, press and hold the [0] key, enter the [INSTALLER CODE] and press the [ACC] button. A reading of 10.5V or
lower indicates at a distant module that the voltage is too low. The voltage may drop during the control panel battery test.
Updating Firmware Using WinLoad
To update your system firmware:
1) Connect the product to your computer using a 307USB Direct Connect Interface or CONV4USB Converter.
2) Start WinLoad Installer Upload/Download Software.
3) Click the In-field Programmer button.
4) Verify the product information located in the In-Field Firmware Programmer window.
5) If the firmware programmer does not automatically detect your control panel, click the Com port settings button and select the correct Com port.
Then click the Refresh Product Info button to connect with the panel.
6) To check for new updates, click the Download Firmware from the web button.
7) From the Select Firmware drop-down box, select the firmware version you wish to install.
or
If you have already downloaded the .pef file from paradox.com, click the [...] button and select the location of the .pef file.
8) Click the Update product firmware button.
When the download process finishes, the update is complete.
Connecting the Keypad and Keypad Zone
EVO641R
Combus
To Digiplex series
control panel
The keypad’s tamper switch will
communicate its status to the
control panel via the combus
* The Keypad zone follows the
control panel’s EOL definition.
The zone speed is set at
600mS and cannot be
programmed.
Digiplex -EVO-
- 59 -
Programming Guide
Access Control Connections (EVO641R only)
EVO641R
EVO641R
Fused external
power supply
(recommended)
No EOL
required
for Z2.
Paradoor (460)
Request to Exit device. Must be
connected to Z2 terminal.
IN4007 Diode
Door Lock
EVO641R
Door Contact
Must be connected
to Z1 terminal
* Follows control panel’s EOL definition
If a door contact is not being used, install a jumper or a 1k9 resistor across the BLK and Z1 terminals
depending on the control panel’s EOL definition.
If the REX (Request for Exit) device is not being used, place a jumper across the BLK and Z2 terminals.
Digiplex -EVO-
- 60 -
Programming Guide
Control Panel Hardware Connections
Single Zone Inputs
ATZ - Double Zone Inputs
Digiplex -EVO-
- 61 -
Programming Guide
Connections
As indicated in Table 6 on page 64,
this run of wire can support 700mA.
Total mA on this run of wire:
(A) 25mA + (B) 30mA =
55mA<700mA = OK
As indicated in Table 6 on
page 64, this run of wire can
support 454mA. Total mA on this
run of wire:
(D) 110mA + (E) 30mA +
(F) 110mA + (G) 110mA
= 360mA<454mA = OK
As indicated in Table 6 on page 64, this run of wire
can support 136mA. Total mA on this run of wire:
(A) 25mA + (C) 30mA = 55mA<136mA = OK
Digiplex -EVO-
- 62 -
Programming Guide
Telephone Line Connections
For TBR-21 compliance, please note the following:
1) The EVO panel can be connected to the telephone network via an RJ-11 connector.
2) The Maximum Dialing Attempts cannot exceed 15 attempts (section [3056] on page 39).
Table 5: Milliamp Consumption Table
Description
QTY.
mA used by each
Total mA
Grafica Graphic LCD Keypads (DNE-K07):
_______
X
130mA =
__________ mA
LCD Keypads (EVO641):
_______
X
110mA =
__________ mA
LCD Keypads with Built-in Reader (EVO641R):
_______
X
120mA =
__________ mA
LED Keypads (DGP2-648):
_______
X
110mA =
__________ mA
Motion Detector Modules (DG85, DGP2-50/60/70):
_______
X
30mA
=
__________ mA
Door Contact Modules (DGP2-ZC1):
_______
X
15mA
=
__________ mA
1-Zone Expansion Modules (DGP2-ZX1):
_______
X
30mA
=
__________ mA
4-Zone Expansion Modules (APR3-ZX4):
_______
X
30mA
=
__________ mA
8-Zone Expansion Modules (APR-ZX8):
_______
X
30mA
=
__________ mA
Magellan Wireless Expansion Modules (MG-RTX3):
_______
X
35mA
=
__________ mA
4-PGM Expansion Modules (APR3-PGM4):
_______
X
150mA =
__________ mA
Printer Modules (APR-PRT3):
_______
X
25mA
=
__________ mA
DVACS Modules (DGP2-DVAC):
_______
X
40mA
=
__________ mA
Annunciator Modules (DGP2-ANC1):
_______
X
20mA
=
__________ mA
InTouch Voice-Assisted Arm/Disarm Modules (APR3-ADM2):
_______
X
105mA =
__________ mA
Hub and Bus Isolator (APR3-HUB2):
_______
X
50mA
=
__________ mA
Access Control Module (DGP-ACM12):
Note: The DGP-ACM12 consumes 130mA from its own power supply or 120mA
when connected on the combus for power.
_______
X
120mA =
__________ mA
Listen-In Module (DGP-LSN4)
_______
X
60mA
__________ mA
Internet Module (IP100)
_______
X
110mA =
__________ mA
Plug-In Voice Module (VDMP3)
_______
X
35mA
__________ mA
=
=
Other devices such as hardwired motion detectors
__________ mA
Maximum available milliamps = 700mA
STEP 1:
GRAND TOTAL
__________ mA
Using Table 5, calculate the total number of milliamps (mA) required by each device, module, and accessory in the system. Please take into
account devices connected to the control panel’s PGM outputs. Since the BELL output has its own power supply, do not include the sirens
connected to it in the calculation.
Digiplex -EVO-
- 63 -
Programming Guide
STEP 2:
If the Grand Total is less than 700mA, go to step 3. If the value is greater, you will require an external power supply (see External Power Supply
Connections drawing on page 62) to provide the additional power needed. Proceed with step 3 and refer to the example (Sample Power
Requirement Calculations drawing) on page 62.
STEP 3:
Due to the degradation of a power signal over long distances (if this were the case, we recommend connecting a Paradox Power Supply
Module, DGP2-PS17), EACH length or run of wire in the system can support only a specific number of milliamps (mA). Using Table 6,
determine how many milliamps each length of wire can support. Please note that the total number of milliamps (mA) can never surpass 700mA.
Table 6: Milliamp (mA) Limitations For Each Run of Wire
Gauge: 18AWG, Surface:
Length of each
run of wire
0.823mm2
Available
Milliamps (mA)
Gauge: 22AWG, Surface: 0.326mm2
Length of each
run of wire
Available
Milliamps (mA)
Gauge: 24AWG, Surface: 0.205mm2
Length of each
run of wire
Available
Milliamps (mA)
30m(100ft.)
700
30m(100ft.)
700
30m(100ft.)
700
61m(200ft.)
700
61m(200ft.)
682
61m(200ft.)
429
91m(300ft.)
700
91m(300ft.)
454
91m(300ft.)
286
122m(400ft.)
700
122m(400ft.)
341
122m(400ft.)
214
152m(500ft.)
690
152m(500ft.)
273
152m(500ft.)
171
183m(600ft.)
575
183m(600ft.)
227
183m(600ft.)
143
213m(700ft.)
493
213m(700ft.)
195
244m(800ft.)
431
244m(800ft.)
170
274m(900ft.)
383
274m(900ft.)
151
305m(1000ft.)
345
305m(1000ft.)
136
457m(1500ft.)
230
610m(2000ft.)
172
762m(2500ft.)
138
914m(3000ft.)
115
Connecting the Combus in Noisy Environments
When installing the combus wires in proximity to high electrical interference such as neon lights, motors, high-voltage wiring, transformers, or if connecting
the combus across separate buildings, you must use shielded cables. Connect the shielded cable as detailed below:
Within the Same Building: Strip the outer jacket at one end of the shielded cable to expose the shield and connect the shield to the control panel ground
(not the dialer ground), while leaving the shield at the other end of the cable open (floating).
Across Separate Buildings: Strip the outer jacket at one end of the shielded cable to expose the shield. In the same building that houses the control panel,
connect the exposed shield to a cold water pipe or any other earth ground available, while leaving the shield at the other end of the cable open (floating). The
same configuration applies to any subsequent building.
Built-in RTC
Digiplex EVO panels incorporates an RTC directly on the PC board. The RTC will save the control panel’s internal clock when both the AC and battery power
have been lost. After power is lost and then restored, the control panel will verify with and then retrieve the time from the RTC. The control panel will verify
and compare its time with the time stored in the RTC every hour. If the times are different, the control panel will reset its internal clock to the time saved in the
RTC. The RTC uses a 3V lithium battery (CR2032) with a battery life of 11 years. Change the battery as shown below:
Reprogram the control panel’s clock after changing the battery.
Danger of explosion exists if the lithium battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
Do not connect a DGP2-TM1 Time Module to the "mem key" connector. Connecting a
DGP2-TM1 will create time errors within the panel and features that use the control
panel's internal clock (ex.: Auto-arming) will not function correctly.
Digiplex -EVO-
- 64 -
Programming Guide
PCB Layout
Built-in RTC
See page 64
(See “VDMP3 Installation Instructions” on
page 55.)
See “Updating Firmware
Using WinLoad” on page 59.
The sum of the
current drawn
from the BELL
and AUX must
be limited to 2.0A.
Exceeding this limit will
overload the panel
power supply and lead
to complete system
shutdown.
40VA transformer strongly recommended
PLEASE NOTE:
When powering up the EVO control panel, the panel will begin a module scan to verify if all the modules connected to
the panel are operational. The scanning process will take between 30 and 120 seconds to complete depending on the
number of modules connected to the control panel. The module scan is complete when the LCD keypad begins to show
the partition status. Only after the module scan is complete will the control panel be fully operational.
When installing the combus wires in a noisy environment, or when connecting the combus across separate buildings,
you must use a shielded cable. Refer to Connecting the Combus in Noisy Environments on page 64.
Refer to the UL and ULC Warnings section of the EVO Reference & Installation Manual for UL and ULC warnings.
Digiplex -EVO-
- 65 -
Programming Guide
Notes_________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
Digiplex -EVO-
- 66 -
Programming Guide
Warranty
For complete warranty information on this product please refer to the Limited Warranty Statement found on the website www.paradox.com/terms. Your use of
the Paradox product signifies your acceptance of all warranty terms and conditions.
© 2002-2007 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice. One or more of the following US patents may
apply: 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549 and RE39406 and other pending patents may apply.
Canadian and international patents may also apply.
Digiplex, Digiplex EVO, Magellan, PosiPIN and WinLoad are trademarks or registered trademarks of Paradox Security Systems Ltd. or its affiliates in Canada, the
United States and/or other countries. For the latest information on products approvals, such as UL and CE, please visit www.paradox.com.
Limitations of Alarm Systems
It must be understood that while your Paradox alarm system is highly advanced and secure, it does not offer any guaranteed protection against burglary, fire or
other emergency (fire and emergency options are only available on certain Paradox models). This is due to a number of reasons, including by not limited to
inadequate or improper installation/positioning, sensor limitations, battery performance, wireless signal interruption, inadequate maintenance or the potential
for the system or telephone lines to be compromised or circumvented. As a result, Paradox does not represent that the alarm system will prevent personal
injury or property damage, or in all cases provide adequate warning or protection.
Your security system should therefore be considered as one of many tools available to reduce risk and/or damage of burglary, fire or other emergencies, such
other tools include but are not limited to insurance coverage, fire prevention and extinguish devices, and sprinkler systems.
We also strongly recommend that you regularly maintain your security systems and stay aware of new and improved Paradox products and developments.
Warning for Connections to Non-Traditional Telephony (eg. VoIP)
Paradox alarm equipment was designed to work effectively around traditional telephone systems. For those customers who are using a Paradox alarm panel
connected to a non-traditional telephone system, such as "Voice Over Internet Protocol" (VoIP) that converts the voice signal from your telephone to a digital
signal traveling over the Internet, you should be aware that your alarm system may not function as effectively as with traditional telephone systems.
For example, if your VoIP equipment has no battery back-up, during a power failure your system's ability to transmit signals to the central station may be
compromised. Or, if your VoIP connection becomes disabled, your telephone line monitoring feature may also be compromised. Other concerns would include,
without limitation, Internet connection failures which may be more frequent than regular telephone line outages.
We therefore strongly recommend that you discuss these and other limitations involved with operating an alarm system on a VoIP or other non-traditional
telephone system with your installation company. They should be able to offer or recommend measures to reduce the risks involved and give you a better
understanding.
WARNING: This equipment must be installed and maintained by qualified service personnel only.
Trouble Display
To view the Trouble Display on LCD or LED keypads:
1) Press the [TRBL] key.
2) For LEDs: Press the Numerical Symbol corresponding to the Group heading to view the specific trouble.
For LCDs: Press the number representing the trouble and use the [ ] and [ ] keys to view the specific trouble.
To view the Trouble Display on Grafica Keypads:
1) Enter your [ACCESS CODE].
2) Using the scroll keys, highlight Trouble and then press the center action key (Ok). The trouble(s) will appear by Trouble Group.
3) If more than one Trouble Group appears, highlight the desired group before pressing the center action key (View) to view the specific trouble.
TROUBLE GROUP [1]: SYSTEM
[1] AC Failure
[2] Battery Trouble
[3] Aux. Current Limit
TROUBLE GROUP [2]: COMMUNICATOR
[4] Bell Current Limit
[5] Bell Absent
[6] ROM Check Error
[7] RAM Check Error
[1] TLM1
[2] Fail to Com. 1
[3] Fail to Com. 2
[4] Fail to Com. 3
[5] Fail to Com. 4
[6] Fail to Com. PC
TROUBLE GROUP [3]: MODULE TROUBLE
TROUBLE GROUP [4]: NETWORK (COMBUS) TROUBLES
[1] Module Tamper
[2] Module ROM Check
Error
[3] Module TLM Trouble
[4] Module Fail to Com.
[1] Missing Keypad
[2] Missing Module
[5] Printer Trouble
[6] Module AC Failure
[6] General Failure
[7] Combus Overload
[7] Module Battery Failure
[8] Module Supply Output
TROUBLE GROUP [5]: ZONE TAMPER
TROUBLE GROUP [6]: ZONE LOW BATTERY
Press the [5] button to display the tampered zone or zones.
Press the [6] button to display the zone(s) assigned to wireless devices
with low batteries.
TROUBLE GROUP [7]: ZONE FAULT
TROUBLE GROUP [8]: CLOCK LOSS
Press the [7] button to display the zone(s) experiencing a communication, a
fire loop or CleanMeTM trouble.
Press the [8] button to re-program the time.
For technical support in Canada or the U.S., call 1-800-791-1919, Monday to Friday from 8:00 a.m. to 8:00 p.m. EST.
For technical support outside Canada and the U.S., call 00-1-450-491-7444, Monday to Friday from 8:00 a.m. to 8:00 p.m. EST.
Please feel free to visit our website at www.paradox.com.
Printed in Canada 10/2007
paradox.com
EVO-EP03
Download PDF