Samsung | DVD-709 | User`s manual | Samsung DVD-709 User`s manual

Downloaded From Disc-Player.com Samsung Manuals
Safety Information
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage” inside the
product that presents a risk
of electric shock or personal injury.
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE
COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates
important instructions
accompanying the product.
CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche
dans la borne correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
WARNING
To reduce the risk of fire or shock hazard, do not expose this DVD player to
rain or moisture.
CAUTION
THIS PRODUCT UTILIZES A
LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the
power supply is AC 120V, 60Hz. It
cannot be used elsewhere.
• This DVD player is designed and
manufactured to respond to the
Region Management Information. If
the Region number of a DVD disc
does not correspond to the Region
number of this DVD player, this DVD
player cannot play the disc.
• This device is protected by U.S.
patent numbers 4,631,603 and
4,577,216 and 4,819,098 and other
intellectual property rights. The use
of Macrovision’s copy protection
technology in the device must be
authorized by Macrovision and is
intended for home and other limited
pay-per-view uses only, unless otherwise authorized in writing by
Macrovision. Reverse engineering or
disassembly is prohibited.
CLASS1
LASER
PRODUCT
2
Downloaded From Disc-Player.com Samsung Manuals
Care & Maintenance
For trouble free operation, follow the instructions shown below.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
Accessories
Remote Control
• Do not move the player while a disc is being played, or the disc may be scratched or
broken, and the player’s internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the
player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
Batteries for
Remote Control
(AA Size)
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER
button, or disconnect and then reconnect the AC power cord to the AC power outlet.
The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the
player for long periods of time.
Video/Audio
Connection Cable
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
S-Video Cable
Be careful not to harm the disc because the data on these discs is highly vulnerable to
the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
User’s Manual
Maintenance of Cabinet
Registration Card
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
Formation of Condensation
Due to sharp changes in temperature and humidity, condensation may form if warm air comes in contact with any cold parts inside the player.
• When condensation forms inside the player, the player may not operate correctly. If this occurs, leave the player at room temperature until the
inside of the player becomes dry and operational.
• If condensation forms on a disc, wipe the disc with a soft and dry cloth by moving the cloth from the center hole toward the outer edge.
3
Downloaded From Disc-Player.com Samsung Manuals
TABLE OF CONTENTS
4
Downloaded From Disc-Player.com Samsung Manuals
Disc Features ..........................................................6
Disc Type and Characteristics ................................7
Description ..............................................................8
• Front Panel (DVD-909) ................................................8
• Front Panel (DVD-709) ................................................9
• Rear Panel (DVD-909)
Choosing a Connection (DVD-909) ......................14
• Connecting to a TV ..................................................14
• Connecting to an Audio System ..................................15
Choosing a Connection (DVD-709) ......................16
• Connecting to a TV ..................................................16
• Connecting to an Audio System ..................................17
Playing a Disc ......................................................18
Searching & Skipping through a Chapter or Track ....20
Using the Display Function ..................................21
Repeat Play ..........................................................22
Using the A-B Repeat Function ............................23
Program Playback in a Specific Order ................24
Using the Disc View Function ..............................25
Selecting Audio ....................................................26
Selecting the Subtitle Language ..........................27
Selecting the Desired Screen Angle ....................28
Using the Bookmark Function ..............................29
Using the Zoom and 3D Sound Functions ..........30
Using the Setup Menu ..........................................31
Setting Up the Language Features ......................32
Setting Up the Parental Level ..............................34
Setting Up Audio Options ....................................35
Surround Sound Speaker Setup (DVD-909 only) ..36
Setting Up Display Options ..................................37
Controlling a TV with the Remote ........................38
Troubleshooting Guide ..........................................39
Specifications (DVD-909) ....................................40
Specifications (DVD-709) ....................................41
Warranty ..............................................................42
SETUP
SETUP
..............................................10
• Rear Panel (DVD-709)................................................11
A Tour of the Remote Control ..............................12
• DVD Function Buttons ..............................................12
• TV Function Buttons ................................................13
CONNECTIONS
BASIC
FUNCTIONS
ADVANCED
FUNCTIONS
CHANGING
SETUP MENU
REFERENCE
5
Downloaded From Disc-Player.com Samsung Manuals
Disc Features
Excellent Sound
Parental Level Control
The Dolby Digital system developed by Dolby Labs
provides crystal clear sound reproduction.
The parental level control allows users to set the
level necessary to prohibit children from viewing
harmful movies such as those with violence, adult
subject matter, etc.
Screen
Video with MPEG2 compression technology. Both
regular and widescreen(16:9) pictures can be
viewed.
Various On-Screen Menu Functions
You can select various languages(Audio/Subtitle)
and screen angles while enjoying movies.
Slow Motion
Repeat
An important scene can be viewed in slow motion.
You can repeat a song or movie simply by pressing
the REPEAT button.
Programmed Play
You can program tracks to play in desired order.
DVD-909
SKIP
STANDBY/ON
PHONE
DVD/VIDEO-CD/CD PLAYER DVD-909
LEVEL
OPEN/
OPEN/
OPEN/
CLOSE
CLOSE
CLOSE
/
MIN
MAX
ADVANCED DOLBY DIGITAL DECODER BUILT-IN
SPATIALIZER
N-2-2
DIGITAL VIDEO
DVD-709
SKIP
STANDBY/ON
/
24bit 96kHz AUDIO D/A CONVERTER
DVD/VIDEO-CD/CD PLAYER DVD-709
OPEN/
OPEN/
CLOSE
CLOSE
SPATIALIZER
N-2-2
DIGITAL VIDEO
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to
your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
6
Downloaded From Disc-Player.com Samsung Manuals
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs, having the corresponding logos:
Disc Types
Logos
Disc Size
Max.
Playing
Time
5 inches
Single-sided
240 min.
Double-sided
480 min.
31/2 inches
Single-sided
80 min.
Double-sided
160 min.
5 inches
74 min.
DVD
Audio
+
Video
VIDEO-CD
Audio
+
Video
Characteristics
SETUP
Recording
Types
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG2 system.
• Various screen and audio functions
can be easily selected through the
on-screen menu.
• Video with CD sound, VHS quality
& MPEG1 compression technology.
31/2 inches
20 min.
5 inches
74 min.
31/2 inches
20 min.
AUDIO-CD
Audio
• An LP is recorded as an analog signal with more distortion. CD is
recorded as a Digital Signal with
better audio quality, less distortion
and less deterioration of audio quality over time.
*DO NOT play CD-ROM, CD-I, CD-R and DVD-ROM in this player! (CDGs play audio only, not graphics.)
Disc Markings
~
• Playback Region Number
DIGITAL
SOUND
NTSC
• NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan, etc.
• Dolby Digital
disc
• Digital Audio
disc
STEREO
• Stereo disc
• DTS disc
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not
match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
7
Downloaded From Disc-Player.com Samsung Manuals
Description-Front Panel
DVD-909
Front Panel Controls
STANDBY LAMP
• When the unit is first plugged in, the indicator lights. When power is pressed on,
the lamp goes out.
POWER ON/OFF
• Use to turn your player on and off (standby).
SKIP
STANDBY/ON
PHONE
DVD/VIDEO-CD/CD PLAYER DVD-909
LEVEL
OPEN/
OPEN/
OPEN/
CLOSE
CLOSE
CLOSE
/
MIN
MAX
ADVANCED DOLBY DIGITAL DECODER BUILT-IN
SPATIALIZER
N-2-2
DIGITAL VIDEO
HEADPHONES JACK
• You can attach headphones here for private listening.
HEADPHONES VOLUME
• Use to adjust headphones volume level.
DISPLAY (See below)
• Operation indicators are displayed here.
DISC TRAY
• Press OPEN/CLOSE to open and close
the disc tray.
GREEN LAMP
SKIP/SEARCH
• Use to skip or search a scene or music.
OPEN/CLOSE
• Press to open and close the disc tray.
PLAY/PAUSE
• Begin or pause disc play.
JOG DIAL
• Operates frame by frame playback. In
CD mode, performs track search.
SHUTTLE DIAL
• Performs fast or slow motion playback.
STOP
• Stops disc play.
Front Display
DISC OPERATION ROTARY INDICATOR
OPERATION INDICATOR
DISC TYPE INDICATOR
TRACK INDICATOR
3D SOUND INDICATOR
ANGLE INDICATOR
CHAPTER INDICATOR
REPEAT INDICATOR
CHAPTER, TITLE, TRACK & MESSAGE
INDICATOR
ALL REPEAT INDICATOR
A-B REPEAT INDICATOR
PROGRAM PLAY INDICATOR
MPEG INDICATOR
DOLBY DIGITAL INDICATOR
LINEAR PCM INDICATOR
DTS INDICATOR
8
Downloaded From Disc-Player.com Samsung Manuals
Description-Front Panel
DVD-709
Front Panel Controls
SETUP
STANDBY LAMP
• When the unit is first plugged in, the indicator lights. When power is pressed on,
the lamp goes out.
POWER ON/OFF
• Use to turn your player on and off (standby).
DISPLAY (See below)
• Operation indicators are displayed here.
DISC TRAY
• Press OPEN/CLOSE to open and close
the disc tray.
SKIP
STANDBY/ON
DVD/VIDEO-CD/CD PLAYER DVD-709
/
24bit 96kHz AUDIO D/A CONVERTER
OPEN/
OPEN/
CLOSE
CLOSE
SPATIALIZER
N-2-2
DIGITAL VIDEO
GREEN LAMP
SKIP/SEARCH
• Use to skip or search a scene or music.
OPEN/CLOSE
• Press to open and close the disc tray.
PLAY/PAUSE
• Begin or pause disc play.
STOP
• Stops disc play.
Front Display
DISC OPERATION ROTARY INDICATOR
OPERATION INDICATOR
DISC TYPE INDICATOR
TRACK INDICATOR
3D SOUND INDICATOR
ANGLE INDICATOR
CHAPTER INDICATOR
REPEAT INDICATOR
CHAPTER, TITLE, TRACK & MESSAGE
INDICATOR
ALL REPEAT INDICATOR
A-B REPEAT INDICATOR
PROGRAM PLAY INDICATOR
MPEG INDICATOR
DOLBY DIGITAL INDICATOR
LINEAR PCM INDICATOR
DTS INDICATOR
9
Downloaded From Disc-Player.com Samsung Manuals
Description-Rear Panel
R
R
OPTICAL
FRONT
SURROUND
DVD-909
L
CENTER
L
S/W
R1
L1
V1
Pr
R2
L2
V2
Pb
Y
COAXIAL
DIGITAL AUDIO OUT
ANALOG AUDIO OUT
MIXED AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Rear Panel
DIGITAL AUDIO OUT JACK
VIDEO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a
compatible Dolby Digital receiver. Use to connect to an A/V
Amplifier that contains a Dolby Digital decoder or DTS decoder.
• Use a video cable to connect one of these jacks to the Video
input on your television.
S-VIDEO OUT JACK
5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input jacks.
• Use the S-Video cable to connect this jack to the S-Video jack
on your television for a higher quality picture.
MIXED AUDIO OUT JACKS
COMPONENT VIDEO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video
receiver, or VCR.
• Use these jacks if you have a TV with Component Video in
jacks. These jacks provide Pr, Pb and Y video. Along with SVideo, Component Video provides the best picture quality.
10
Downloaded From Disc-Player.com Samsung Manuals
Description-Rear Panel
DVD-709
SETUP
R
DIGITAL
AUDIO OUT
L
ANALOG AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Rear Panel
DIGITAL AUDIO OUT JACK
VIDEO OUT JACK
• Use a coaxial digital cable to connect to an A/V Amplifier that
contains a Dolby Digital decoder or DTS decoder.
• Use a video cable to connect this jack to the Video input on
your television.
ANALOG AUDIO OUT JACKS
S-VIDEO OUT JACK
• Connect to the Audio input jacks of your television, audio/video
receiver, or VCR.
• Use the S-Video cable to connect this jack to the S-Video jack
on your television for a higher quality picture.
11
Downloaded From Disc-Player.com Samsung Manuals
A Tour of the Remote Control
DVD Function Buttons
DVD POWER Button
NUMBER Buttons
OPEN/CLOSE Button
SETUP Button
• Brings up the DVD player’s Setup menu.
ZOOM Button
SEARCH Buttons
• Allows you to search forward/backward
through a disc.
STOP Button
STEP Button
• Advances playback one frame at a time.
RETURN Button
• Returns to a previous menu.
TOP MENU Button
• Accesses a music or video display directly.
AUDIO Button
• Use this button to access various audio
functions on a disc.
REPEAT Button
• Allows you to repeat play a title, chapter,
track, or disc.
TV POWER Button
• Use to set the remote to control a compatible TV.
VOLUME CON. Button
• To control the master volume of the player.
3D SOUND Button
BOOKMARK Button
PLAY/PAUSE Button
• Begin/Pause disc play.
SKIP Buttons
• Use to skip the title, chapter, or track.
CLEAR Button
• Use to remove menus or status displays
from the screen.
MODE Button
• Allows you to program a specific order.
DISPLAY Button
• Displays the current disc mode.
MENU Button
• Brings up the Disc menu.
ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Button)
• This button functions as a toggle switch.
ANGLE Button
• Use to access various camera angles on a
DVD.
SUBTITLE Button
A-B REPEAT Button
• Use to mark a segment to repeat between
A and B.
12
Downloaded From Disc-Player.com Samsung Manuals
A Tour of the Remote Control (Cont’d)
TV Function Buttons
SETUP
TV POWER Button
TV/VIDEO Selection Button
CHANNEL UP/DOWN Buttons
VOLUME UP/DOWN Buttons
Install Batteries in the Remote
1.
2.
Open the battery cover on
the back of the remote.
3.
Replace the battery cover.
Insert two AA batteries.
Make sure that the polarities (+ and -) are aligned
correctly.
If remote doesn’t operate
properly:
• Check the polarity + - of the
batteries (Dry-Cell)
• Check if the batteries are
drained.
• Check if remote sensor is
blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
To Connect Headphones (not included) (DVD-909 only)
Connect headphones with a standard stereo plug to the headphone jack (M6).
• Before connecting, set headphone volume at minimum. Then adjust to a suitable volume.
NOTE
This
icon indicates an invalid button press.
13
Downloaded From Disc-Player.com Samsung Manuals
Choosing a Connection
DVD-909
The following show examples of connections commonly used to connect the DVD player with a TV and other
components.
Before Connecting the DVD Player
Connecting to a TV (For Video)
• Method 1
DVD Player + TV with Video Input Jack
• Always turn off the DVD player, TV, and other
components before you connect or disconnect any
cables.
• Method 2
DVD Player + TV with S-Video Input Jack
• Refer to owner’s manual of the components you
are connecting for more information on those particular components.
• Method 3
DVD Player + TV with Component Video Jacks
Connecting to a TV
TV (Normal, Widescreen, Projection, etc..)
Audio Input Jacks
TV
R
Method 1
Method 2
Video Input Jack
S-Video Jack
Component Video Jacks
Pr
L
OR
OR
L1
V1
Pr
R2
L2
V2
Pb
Basic Audio
14
Downloaded From Disc-Player.com Samsung Manuals
VIDEO OUT
S-VIDEO OUT
Good
picture
Better
picture
Pb
Video Cables
(not included)
R1
MIXED AUDIO OUT
Y
S-Video
Cable
(included)
AV Cable
(included)
DVD
PLAYER
Method 3
Y
COMPONENT VIDEO OUT
Best picture
Choosing a Connection (Cont’d)
Connecting to an Audio System
Method 1
Method 2
Method 3
5.1ch Analog Amplifier
Audio Input Jacks
Audio Input Jacks
R
L
Dolby Digital Decoder
CONNECTIONS
2ch Amplifier
AUDIO
SYSTEM
Digital Audio Input Jacks
Front (RH)
Front (LH)
Center
Rear (RH)
Rear (LH)
Subwoofer
OPTICAL
COAXIAL
OR
R1
L1
R2
L2
R
R
FRONT
SURROUND
L
CENTER
L
DVD
PLAYER
S/W
OPTICAL
MIXED AUDIO OUT
ANALOG AUDIO OUT
Mixed Audio Out
Analog Audio Out
Rear Panel
COAXIAL
DIGITAL AUDIO OUT
Digital Audio Out
Connecting to an Audio System
• Method 1
DVD Player + 2ch Stereo Amplifier or
Dolby Pro Logic Decoder
R
R
OPTICAL
FRONT
SURROUND
L
CENTER
L
S/W
R1
L1
V1
Pr
R2
L2
V2
Pb
Y
COAXIAL
DIGITAL AUDIO OUT
ANALOG AUDIO OUT
MIXED AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
• Method 2
DVD Player + Amplifier with 5.1ch
Analog Input Jacks
• Method 3
DVD Player + Amplifier with Dolby
Digital Decoder/DTS Decoder
15
Downloaded From Disc-Player.com Samsung Manuals
Choosing a Connection
DVD-709
The following show examples of connections commonly used to connect the DVD player with a TV and other
components.
Before Connecting the DVD Player
Connecting to a TV (For Video)
• Always turn off the DVD player, TV, and other
components before you connect or disconnect any
cables.
• Method 1
DVD Player + TV with Video Input Jack
• Method 2
DVD Player + TV with S-Video Input Jack
• Refer to owner’s manual of the additional components you are connecting for more information for
those particular components.
Connecting to a TV
TV (Normal, Widescreen, Projection, etc..)
Method 1
Audio Input Jacks
TV
R
Method 2
Video Input Jack
S-Video Jack
L
AV Cable
(included)
S-Video Cable
(included)
OR
DVD
PLAYER
R
L
ANALOG AUDIO OUT
Basic Audio
16
Downloaded From Disc-Player.com Samsung Manuals
VIDEO OUT
Better
picture
S-VIDEO OUT
Best
picture
Choosing a Connection (Cont’d)
Connecting to an Audio System
Method 1
Method 2
AUDIO
SYSTEM
Dolby Digital Decoder
Audio Input Jacks
Digital Audio Input Jack
R
L
R
L
CONNECTIONS
2ch Amplifier
DVD
PLAYER
ANALOG AUDIO OUT
DIGITAL
AUDIO OUT
Analog Audio Out
Digital Audio Out
Rear Panel
Connecting to an Audio System
• Method 1
DVD Player + 2ch Stereo Amplifier or Dolby Pro
Logic Decoder
R
DIGITAL
AUDIO OUT
L
ANALOG AUDIO OUT
VIDEO OUT
S-VIDEO OUT
• Method 2
DVD Player + Amplifier with Dolby Digital
Decoder/DTS Decoder
17
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Playing a Disc
Before Playback
• Turn on a TV and press TV/VIDEO button to select video
mode.
• Turn on your Audio System to select AUX, CD or DVD.
• Refer to your AUDIO Owner’s Manual.
1.,3.
After plugging in the player, the first time you press
DVD POWER button, this screen comes up :
SELECT MENU LANGUAGE
PRESS
PRESSEZ
DRUCKEN SLE
PULSAR
PREMERE
TOETS
3.
1
2
3
4
5
6
FOR ENGLISH
POUR FRANCAIS
DEUTSCH
PARA ESPANOL
PER ITALIANO
VOOR NEDERLANDS
1-6
RETURN
If you want to select the language, press a NUMBER button. (This screen will only appear the very
first time you plug in the player.)
Playback
1.
Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
2.
Place a disc gently into the tray with the disc’s
label facing up.
3.
Press the PLAY/PAUSE button or
OPEN/CLOSE button to close the disc tray.
18
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Playing a Disc (Cont’d)
Several options are available during DVD playback.
1.
Stopping Playback
Press the STOP button in playback.
2.
Removing Disc
2.
Press the OPEN/CLOSE button.
3.
Pausing Playback
5.
3.
3.
4.
Step Motion Playback (Except CD)
5.
Press the STEP button on the remote or turn JOG dial
(DVD-909 only) on the front of the DVD player during
playback.
- Each time the button is pressed, a new frame will
appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE to resume normal playback.
(You can only perform step motion playback in the forward direction.)
BASIC
FUNCTIONS
1.
4.,5.
Press the PLAY/PAUSE or STEP button on the remote
during playback.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE button once again.
Slow Motion Playback (Except CD)
Press the FWD or REV SEARCH button on the remote or
turn the SHUTTLE dial (DVD-909 only) on the front of the
DVD player during PAUSE or STEP mode.
- By pressing or shuttling, you can select slow motion
playback for 1/2, 1/4 or 1/8 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE to resume normal playback.
- When playing a VCD, the reverse slow motion playback
will not work.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up where you left off (unless
the disc is removed, the STOP button is pressed twice or the player is unplugged.).
NOTE
• If the player is left for 5 minutes in pause mode, it will stop.
• The power is automatically turned off after approximately 30 minutes have elapsed in the stop mode (auto power-off feature).
• If the player is left in the stop mode for more than one minute without any user interaction, a screensaver will be activated, and the
TV screen will fade in and fade out repeatedly. Press PLAY button to resume normal play.
19
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Searching & Skipping through a Chapter or Track
During playback, you can search quickly through a chapter or track or use the skip function to jump to the
next selection.
Searching through a Chapter or Track
1.
Press the FWD or REV SEARCH button on the
remote or turn the SHUTTLE dial (DVD-909
only) on the front of the DVD player during
PLAY mode.
• Press the REVERSE or FORWARD SEARCH button on
the remote and press again to search at a faster
speed(2X/8X/16X/32X/normal speed, in order) on DVD.
• Press the REVERSE or FORWARD SEARCH button on
the remote and press again to search at a faster
speed(4X/8X/normal speed in order) on VCD and CD.
1.
2.
1.
2.
• To return to normal speed playback, press the PLAY/
PAUSE button.
Skipping Tracks
2.
Press the NEXT SKIP or BACK SKIP button
during playback.
• When playing a DVD, if you press the NEXT SKIP button,
it moves to next chapter. If you press the BACK SKIP button, it
moves to the beginning of the chapter. One more press makes
it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1
or a CD,
if you press NEXT SKIP button, it moves to next track. If you
press BACK SKIP button, it moves to the the beginning of the
track. One more press makes it move to the beginning of the
previous track.
• If a track exceeds 15 minutes when playing a VCD and you
press NEXT SKIP button, it moves forward 5 minutes. If you
press BACK SKIP button, it moves backward 5 minutes.
• When playing a VCD 2.0 in the MENU MODE or Track
View function,
if you press NEXT SKIP button, it move to the next MENU or
the next Track View display. If you press BACK SKIP button, it
moves to the previous MENU or the previous Track View display. (Refer to page 25.)
NOTE
• While in search (8X/16X/32X) on DVD or high-speed playback on VCD, no sound will be heard.
• Though 2X SCAN AUDIO is ON in SETUP MENU, no sound will be heard on discs which are recorded with LPCM, DTS or MPEG-2.
• Depending on the disc, audio may not be heard when a disc is in 2X playback mode.
20
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Using the Display Function
If you want to display the title, chapter, time, audio and subtitle information on a DVD, press the DISPLAY button. If you want to display the track and time information on a VCD or CD, press the DISPLAY button.
When Playing a DVD
1.
1
- Current title, chapter number and
elapsed time will be displayed.
- Current track number and elapsed
time will be displayed.
During playback, press the
DISPLAY button on the
remote.
T: 01
1.,1
C: 04
TIME 0:06:54
During playback, press the
DISPLAY button on the
remote.
T:
01
TIME 0:12:43
• Use the LEFT/RIGHT button to select
a title or a chapter number.
Use the UP/DOWN button or Number
buttons to enter a different title or
chapter number, then press the
ENTER button.
• To enter the time from which you
want to start, use the LEFT/RIGHT
button to select, then use the
Number buttons to enter the time.
Then press the ENTER button.
• Use the LEFT/RIGHT button to select
a track. Use the UP/DOWN button or
Number buttons to enter a different
track number and then press the
ENTER button.
• To enter the time from which you
want to start, use the LEFT/RIGHT
button to select, then use the
Number buttons to enter the time and
then press the ENTER button.
2.
2
- Current audio and subtitle information
will appear.
- Elapsed time and remain time will
appear.
Press the DISPLAY button
on the remote twice.
AUDIO
: ENG DOLBY DIGITAL 5.1CH
SUBTITLE : ENG ON
BASIC
FUNCTIONS
1.,1
2.,2
When Playing a CD/VCD
Press the DISPLAY button
on the remote twice.
T:02 0:00:03
T:01 1:07:47 REMAIN
What is a Chapter?
Each Title on a DVD can be divided into chapters (similar to tracks
on an audio CD).
NOTE
What is a Title?
A DVD may contain several different titles. : for example, if a disc
contains four different movies,
each might be considered a title.
- To make the screen disappear, press
the DISPLAY button again.
- To make the screen disappear, press
the DISPLAY button again.
21
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Repeat Play
Repeat play allows you to repeat a track, title, or the entire disc.
When playing a DVD
1.
Press the REPEAT button
once to display the current
status.
2.
Press the REPEAT button
twice to repeat the chapter
currently playing.
REPEAT : CHAPTER
3.
Press the REPEAT button a
third time to repeat the title
currently playing.
REPEAT : TITLE
When playing a CD/VCD
1
Press the REPEAT button
once to display the current
status.
2
Press the REPEAT button
twice to repeat the current
track.
REPEAT : TRACK
3
Press the REPEAT button a
third time to repeat all
tracks.
REPEAT : ALL
1.,1
2.,2
3.,3
4.,4
4.
Press the REPEAT button
again to turn off the repeat
feature.
REPEAT : OFF
NOTE
• DVD repeats playback by chapter or title, CD and VCD repeat
playback by disc or track.
• Depending on the disc, the
Repeat function may not work.
• When in VCD 2.0 mode (MENU
ON mode), this function does
not work.
22
Downloaded From Disc-Player.com Samsung Manuals
4
Press the REPEAT button
again to turn off the repeat
feature.
REPEAT : OFF
DVD/VCD/CD
Using the A-B Repeat Function
The A-B Repeat function lets you mark a segment to repeat between the beginning (A) and the end (B) of the
segment you want to review.
To set up A-B Repeat
1.
Press the A-B REPEAT button at the beginning
(A) of the segment you want to review.
REPEAT : A -
2.
REPEAT : A - B
BASIC
FUNCTIONS
Press the A-B REPEAT button again at the
end (B) of the segment you want to review.
The segment will begin repeating.
1.,1
2.
To clear A-B Repeat
1
Press the A-B REPEAT button.
REPEAT : OFF
NOTE
• The A-B Repeat function works on the same title or track.
• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.
• Depending on the disc, the A-B REPEAT function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
23
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Program Playback in a Specific Order
Program playback lets you set up a specific order for playback of titles, chapters or tracks on a disc only. This
function works in stop mode only.
Program VCD or CD
Program DVD
e.g
To program chapters 5 and 7 in order.
1.
1
2
In stop mode, press the
MODE button.
TITLE
CHAPTER
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
4.,4
-----
-----
-----
e.g
-----
To program tracks 5 and 7 in order.
In stop mode, press the
MODE button.
Use the LEFT/RIGHT button to select PROGRAM.
Press the ENTER button.
TRACK
01
05
09
13
RETURN
02
06
10
14
PROGRAM ORDER
03
07
11
15
04
08
12
16
-----
-----
-----
-----
CLEAR LAST TRACK
CLEAR ALL TRACKS
1.,1
2.
2.,2
3.,3
3.
3
Use the LEFT/RIGHT or
UP/DOWN button to select
05 and press ENTER.
Then select 07 and press
the ENTER button.
4.
4
Press the PLAY/PAUSE
button. The disc will be
played back in programmed order.
Use the LEFT/RIGHT button to select CHAPTER.
Press the ENTER button.
Use the LEFT/RIGHT or
UP/DOWN button to select
05 and press ENTER. Then
select 07 and press ENTER
button.
Press the PLAY/PAUSE
button. The disc will be
played back in programmed
order.
PRESS PLAY TO START
RETURN
e.g
When you make a wrong selection during programming
To start RANDOM playback.
• Press the MODE button while in stop
mode.
• Use the LEFT/RIGHT button to
select RANDOM and press the
ENTER button.
- The disc will be played back in random order.
• Use the UP/DOWN button to select CLEAR LAST TRACK (or CHAPTER, or TITLE).
• Press the ENTER button to delete the last track (or chapter, or title) in the program order.
When you want to delete the entire program
• Use the UP/DOWN button to select CLEAR ALL TRACKS (or CHAPTERS, or TITLES).
• Press the ENTER button to delete all tracks, chapters or titles in the program order. All programmed tracks, chapters or titles are also deleted when the disc is removed or the DVD
player is turned off.
24
Downloaded From Disc-Player.com Samsung Manuals
NOTE
• Depending on the disc, the
Program Playback function may
not work.
• To resume normal playback,
press the CLEAR button.
DVD/VCD/CD
Using the Disc View Function
The desired music or video display can be accessed directly without using the menu function.
Track View (VCD)
Index View (VCD)
Displays the beginning view of
each track and the track number.
1.
Press the TOP MENU button in playback.
DISC VIEW
1 TRACK VIEW
Displays the equally divided 9
views of the current playing
track.
1
2
Press the TOP MENU button in playback.
3
Select the desired view by
pressing UP/DOWN or
LEFT/RIGHT buttons.
Press UP/DOWN button to
select INDEX VIEW. Press
the ENTER button.
2 INDEX VIEW
2.
Press the UP/DOWN button
to select TRACK VIEW.
Press the ENTER button.
3.
Select the desired view by
pressing the UP/DOWN or
LEFT/RIGHT buttons.
TRACK VIEW
1
2
3
4
5
6
7
8
9
4
1
2
3
4
5
6
7
8
9
ADVANCED
FUNCTIONS
1.,1
2.,2
3.,3
4.,4
INDEX VIEW
Press the ENTER button.
(An example of a Track View)
4.
Press the ENTER button.
When you press TOP MENU button during DVD playback
The disc’s TITLE MENU function will come up. A disc must have at least two titles for the
TITLE MENU function to work.
When you press TOP MENU button during CD playback
The unit enters the INTRO SCAN mode. INTRO SCAN lets you listen to the beginning of
each track for about 10 seconds.
NOTE
• When in VCD 1.1 & 2.0 mode (MENU OFF mode), this function works.
• In stop mode on VCD, press the TOP MENU button and the TRACK VIEW will be displayed directly.
25
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD/CD
Selecting Audio
You can select a desired language quickly and easily with the AUDIO button. If a menu is encoded on the disc,
you can also select by using the MENU button.
Using the Audio Button
1.
2.
Using the Menu Button
Press the AUDIO button.
Use the UP/DOWN button
to select the desired language on a DVD.
AUDIO:
ENG
When playing a DVD
1
2
DOLBY DIGITAL 5.1CH
Press the MENU button.
Use the UP/DOWN button
to select AUDIO information.
1
AUDIO
2
SUBTITLE
- The audio and subtitle languages are
represented by abbreviations.
1
2.,2
3.,3
4,5
1.
(An example of a disc menu)
3.
Use the UP/DOWN button
to select STEREO,
R CHANNEL or L CHANNEL. (On VCD/CD)
AUDIO:
STEREO
3
4
Press the ENTER button.
Use the UP/DOWN button
to select ‘ENGLISH’.
1
ENGLISH
2
FRANCAIS
(An example of a disc menu)
5
Press the ENTER button.
When playing a VCD
How to have the same audio language come up
whenever you play back a DVD.
Refer to “Setting Up the Language Features” on page 33.
NOTE
• This function depends on what languages are encoded on the disc and may not
work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
26
Downloaded From Disc-Player.com Samsung Manuals
In disc version 2.0, the MENU button
works as a conversion switch between
MENU ON and MENU OFF mode.
When playing a VCD 1.1 or CD, the
MENU button will not work.
DVD
Selecting the Subtitle Language
When a DVD is recorded with subtitles, you can use the Subtitle feature to view the subtitles on-screen.
If a menu is encoded on the disc, you can also select by using the MENU button.
Using the SUBTITLE button
1.
2.
Press the SUBTITLE button.
Use the UP/DOWN button
to select the desired subtitle language.
SUBTITLE:
ENG
Using the MENU button
1
2
Press the MENU button.
Use the UP/DOWN button
to select SUBTITLE information.
OFF
1
AUDIO
2
SUBTITLE
(An example of a disc menu)
3.
Use the LEFT/RIGHT button to determine whether or
not the subtitle will be displayed.
SUBTITLE:
ENG
ON
3
4
Press the ENTER button.
Use the UP/DOWN button
to select the desired language.
ADVANCED
FUNCTIONS
1
2.,2
3.,3
4,5
1.
- Initially the subtitling will not appear
on screen.
- The audio and subtitle languages are
represented by abbreviations.
1
ENGLISH
2
FRANCAIS
(An example of a disc menu)
5
Press the ENTER button.
When playing a VCD
How to have the same subtitle language come up
whenever you play back a DVD.
Refer to “Setting Up the Language Features” on page 33.
NOTE
• This function depends on what languages are encoded on the disc and may not
work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
In disc version 2.0, the MENU button
works as a conversion switch between
MENU ON and MENU OFF mode.
When playing a VCD 1.1 or CD, the
MENU button will not work.
27
Downloaded From Disc-Player.com Samsung Manuals
DVD
Selecting the Desired Screen Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
Using the ANGLE button
Check to see if an ‘ANGLE (
)’ mark is present at
the upper right hand corner of the screen.
1.
When an ‘ANGLE’ mark is shown, press the
ANGLE button.
ANGLE: 1/6
MARK:
ON
(An example of Angle information display)
2.
Use the UP/DOWN button to select the desired
screen angle. Then press the ENTER button.
2.,3.
1.
ANGLE: 5/6
MARK:
ON
(An example of Angle information display)
3.
Use the LEFT/RIGHT button to determine
whether or not the ‘ANGLE’ mark will be displayed.
ANGLE: 5/6
NOTE
MARK:
• This function is disc-dependent, and may not work with all DVDs.
• This function does not work when a DVD has not been recorded with a multi-camera angle system.
28
Downloaded From Disc-Player.com Samsung Manuals
OFF
DVD/VCD
Using the Bookmark Function
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quickly
find the section at a later time.
Using the Bookmark Function (DVD/VCD)
1.
During playback, press the BOOKMARK button on the remote.
Then ‘MARKER’ will be displayed.
MARKER:
---
MARK
ENTER
1.,1, 1 .
3
3.
2.
3.
4.
Use the LEFT/RIGHT button to move to the desired bookmark
icon.
When you reach the scene you want to mark, press the ENTER
button. The icon will change to a number (1, 2, or 3)
Press the BOOKMARK button to turn off the display.
2., 2 .
NOTE
ADVANCED
FUNCTIONS
Recalling a Marked Scene
Clearing a Bookmark
1
During playback, press the
BOOKMARK button on the
remote.
1.
During playback, press the
BOOKMARK button on the
remote.
2
Use the LEFT/RIGHT button to select a marked
scene.
2.
Use the LEFT/RIGHT button to select the bookmark
number you want to
delete.
3
Press the PLAY/PAUSE
button to skip to the
marked scene.
3.
Press the CLEAR button to
delete a bookmark number.
Press the BOOKMARK
button to turn off display.
• Up to three scenes may be marked at the same time.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
• Depending on the disc, the Bookmark function may not work.
29
Downloaded From Disc-Player.com Samsung Manuals
DVD/VCD
Using the Zoom and 3D Sound
Using the Zoom Function (DVD/VCD)
1.
During playback or pause mode, press the
ZOOM button on the remote. The square frame
will be displayed on screen.
2.
3.
Use the UP/DOWN or LEFT/RIGHT button to
select the part of the screen you want to zoom.
Press the ENTER button.
1.
1
- During DVD playback, press ENTER to zoom in 2X/4X/normal in order.
- During VCD playback, press ENTER to zoom in 2X/normal
in order.
Using the 3D Sound Function
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the analog
outputs.
(Discs which are recorded with LPCM or DTS will
not work. While DIGITAL OUTPUT is set to BITSTREAM in SETUP MENU, 3D Sound function will
not work.)
2.,2
Using the Master Volume Control Function
Press the VOLUME CON. button. Use the UP/DOWN button to
select a suitable volume.
• Master Volume Control function lets you adjust the volume of the
player’s output. This is useful for matching the player’s output level
to other equipment in your system.
• Master Volume Control function on CD titles with DTS will not work
under VOLUME : 96 level.
• While DIGITAL OUTPUT is set to BITSTREAM in SETUP MENU,
Volume Control function will not work.
NOTE
1
During playback, press the 3D SOUND button.
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set
to PCM.)
2
Press the LEFT/RIGHT button to turn the 3D
Sound feature on or off.
• 3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not
contain rear channel sound signals.
• Depending on the disc, the Zoom and 3D Sound function may not work.
• SPATIALIZER is manufactured under license from Desper Products Inc. SPATIALIZER ® and symbol are trademarks of Desper
Products Incorporated.
30
Downloaded From Disc-Player.com Samsung Manuals
DVD
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you have
(i.e. widescreen).
1.
Press the SETUP button on the remote in the
play or stop mode.
SETUP MENU
1
2
3
4
5
6
7
1.
PLAYER MENU
ENGLISH
DISC MENU
ENGLISH
AUDIO
ENGLISH
SUBTITLE
AUTOMATIC
PARENTAL
UNLOCKED
AUDIO OPTIONS
DISPLAY OPTIONS
PLAYER MENU : Setup of the Display Language
(See P32)
Use the Player preference menu to select the language for
the player’s on-screen displays.
DISC MENU : Setup of the Menu Language (See P33)
Use the Menu preference menu to select the language
you want a DVD’s disc menu to be displayed in.
AUDIO : Setup of the Audio Language (See P33)
2.
Use the Audio preference menu to select the soundtrack
language.
SUBTITLE : Setup of the Subtitle Language (See P33)
Use the Subtitle preference menu to select the language
the disc’s subtitles are to be displayed in.
PARENTAL : Setup of the Parental Level (See P34)
Allows users to set the level necessary to prevent children
from viewing unsuitable movies such as those with violence, X rating, etc.
CHANGING
SETUP MENU
AUDIO OPTIONS : Setup of the Audio Options (See P35)
Use to set up the audio options such as speaker setup.
DISPLAY OPTIONS : Setup of the Display Options
(See P37)
Use to select which type of screen you want to watch
and several display options.
2.
3.
Use the UP/DOWN button on the remote to
access the different features.
Press the ENTER button to access the sub
features.
To make the setup screen disappear after setting up, press
SETUP button again.
NOTE
Depending on the disc, some SETUP menu selections
may not work.
31
Downloaded From Disc-Player.com Samsung Manuals
DVD
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, it will come up automatically
every time you watch a movie.
Using the Player Menu
e.g
Setting up in ENGLISH.
1.
2.
Press the SETUP button when in play or stop
mode.
Use the UP/DOWN button to select the
PLAYER MENU.
1.
SETUP MENU
1
2
3
4
5
6
7
2.
PLAYER MENU
ENGLISH
DISC MENU
ENGLISH
AUDIO
ENGLISH
SUBTITLE
AUTOMATIC
PARENTAL
UNLOCKED
AUDIO OPTIONS
DISPLAY OPTIONS
3.
4.
Press the ENTER button.
Use the UP/DOWN button to select ‘ENGLISH’.
PLAYER MENU LANGUAGE
1
2
3
4
5
6
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
5.
Press the ENTER button.
- ENGLISH is selected and the screen returns to SETUP
MENU
- To make the SETUP MENU disappear, press the RETURN
button.
32
Downloaded From Disc-Player.com Samsung Manuals
DVD
Setting Up the Language Features (Cont’d)
Using the Disc Menu Language
This function changes the language only for the text on the
disc menu screens.
e.g
Setting up in ENGLISH.
Using the Audio Language
e.g
Setting up in ENGLISH.
1.
2.
3.
4.
Press the SETUP button
when in play or stop mode.
Press the UP/DOWN button
to move to AUDIO.
1
2
3
4
Press the SETUP button
when in play or stop mode.
Use the UP/DOWN button
to select DISC MENU.
Press the UP/DOWN button
to select ‘ENGLISH’ .
e.g
Setting up in ENGLISH.
A
B
C
D
Press the SETUP button
when in play or stop mode.
Use the UP/DOWN button
to select SUBTITLE.
Press the ENTER button.
Use the UP/DOWN button
to select ‘ENGLISH’.
Press the ENTER button.
SUBTITLE LANGUAGE
AUDIO LANGUAGE
Use the UP/DOWN button
to select ‘ENGLISH’.
DISC MENU LANGUAGE
1
2
3
4
5
6
7
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
OTHERS
Press the ENTER button.
- ENGLISH is selected and the screen
returns to SETUP MENU.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
ORIGINAL
OTHERS
- Select “ORIGINAL” if you want the
default soundtrack language to be
the original language the disc is
recorded in.
- Select “OTHERS” if the language
you want is not listed.
5.
Press the ENTER button.
- ENGLISH is selected and the screen
returns to SETUP MENU.
AUTOMATIC
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
OTHERS
- Select “AUTOMATIC” if you want the
subtitle language to be the same as
the language selected as the audio
preference.
- Select “OTHERS” if the language
you want is not listed. Some discs
may not contain the language you
select as your initial language; in that
case the disc will use its original
language setting.
E
CHANGING
SETUP MENU
- Select “OTHERS” if the language
you want is not listed.
5
Press the ENTER button.
Using the Subtitle Language
Press the ENTER button.
- ENGLISH is selected and the screen
returns to SETUP MENU.
How to make the SETUP MENU disappear or
return to menu screen during set up.
Press RETURN button.
NOTE
If the selected language is not recorded on the disc, the original pre-recorded language is selected.
33
Downloaded From Disc-Player.com Samsung Manuals
DVD
Setting Up the Parental Level
The Parental Level function works in conjunction with DVDs that have been assigned a rating - which helps you
control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
SETTING THE
PASSWORD
1
2
3
1.,1
Press the SETUP button
when in play or stop mode.
Press the UP/DOWN button
to select PARENTAL.
Press the ENTER button
and enter your 4-digit password by pressing the 0-9
button.
SETTING THE
PARENTAL LEVEL
e.g
Setting up in LEVEL 6
1.
2.
3.
Press the SETUP button
when in play or stop mode.
Press the UP/DOWN button
to select PARENTAL.
Press the ENTER button
and enter your 4-digit password by pressing the 0-9
button.
- ‘7777’ is the original password that
has been encrypted in the player.
4
4.
Move to the RATING
LEVEL by using the
UP/DOWN button and
press the ENTER button.
PARENTAL CONTROL
2.,2
3.,3
4.,4
5.,5
PARENTAL CONTROL
1
2
What if a DVD’s rating exceeds
the player’s rating level?
NOTE
Move to CHANGE PASSWORD by using the
UP/DOWN button and
press the ENTER button.
The player alerts you when you
try to play a DVD with a rating
that exceeds the level you’ve set.
The message, “Your selection
exceeds the rating level for this
player.” appears on screen.
Some discs are authored with a
rating override feature included.
When you play a disc with this
feature, the message, “Your
selection exceeds the rating level
for this player. Override the
level?” is displayed. Select
“Override” or “Cancel.” If you
choose to override the rating
level, you will need to enter your
4-digit password to begin playback.
34
Downloaded From Disc-Player.com Samsung Manuals
5
RATING LEVEL
CHANGE PASSWORD
Enter the new password.
- After entering the new password, reenter it one more times to make sure
the password works.
- The Parental Level function is compatible only with parental level
encoded discs.
How to make the SETUP MENU
disappear or return to
menu screen during set up.
Press RETURN button.
1
2
RATING LEVEL
CHANGE PASSWORD
5.
Move to LEVEL 6 by using
the UP/DOWN button and
press the ENTER button.
RATING LEVEL
UNLOCK
LOCK LEVEL 8 ADULT
LEVEL 7
LEVEL 6
LEVEL 5
LEVEL 4
LEVEL 3
LEVEL 2
LEVEL 1 KIDS SAFE
- The disc which contains LEVEL 7 or
LEVEL 8 will now not play.
DVD
Setting Up Audio Options
1.
2.
Press the SETUP button
when in play or stop mode.
Use the UP/DOWN button to
select AUDIO OPTIONS. Then
press the ENTER button.
3.
Use the UP/DOWN button to
select the desired item. Then
press the ENTER button.
SPEAKER SETUP (DVD-909
only)
To select the SPEAKER SETUP to
hear surround sound.
4.
Use the UP/DOWN button to
select the desired item. Then
press the ENTER button.
DIGITAL OUTPUT
1
1.
AUDIO OPTIONS
2
1
2
3
4
5
DIGITAL OUTPUT
DTS
DYNAMIC COMPRESSION
2X SCAN AUDIO
SPEAKER SETUP
PCM
OFF
ON
OFF
PCM : Converts to PCM(2CH)
48kHz/16Bit audio. Select PCM
when using the Analog Audio
Outputs.
BITSTREAM : Converts to Dolby
Digital BITSTREAM (5.1CH).
Select BITSTREAM when using
the Digital Audio Output.
909 only
NOTE : Be sure to select the
correct Digital Output or no
audio will be heard.
2.
DIGITAL OUTPUT
A digital surround sound format
that is recorded by Dolby Digital.
Select the suitable output signal
type of digital audio output
(Bitstream/PCM) during playback.
DTS
1
2
DYNAMIC COMPRESSION
1
2
How to make the SETUP MENU
disappear or return to menu
screen during set up.
Compresses the dynamic range
(quietest to loudest sound) of a
disc’s soundtrack. This function is
disc-dependent, and may not work
with all DVDs.
2X SCAN AUDIO
Turns audio off or on when a disc
is in 2X playback mode.
ON : To select dynamic compression.
OFF : To select the standard
range.
2X SCAN AUDIO
1
2
DYNAMIC COMPRESSION
ON : Outputs DTS BITSTREAM
via digital output only .
Select DTS when connecting to a DTS DECODER.
OFF : Doesn’t output digital signal.
CHANGING
SETUP MENU
This program features discrete 5.1
channel sound-track and must be
played through DTS-capable
equipment. When played through
DTS equipment, sound will be
heard from all five system speakers and a subwoofer.
DTS
ON : Turn 2X audio on.
OFF : Turn 2X audio off.
Though 2X SCAN AUDIO is ON
in SETUP MENU, no sound will
be heard on discs which are
recorded with LPCM, DTS or
MPEG-2.
SPEAKER SETUP
Refer to page 36.
Press RETURN button.
NOTE
• Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights reserved.
35
Downloaded From Disc-Player.com Samsung Manuals
DVD
Surround Sound Speaker Setup (DVD-909 only)
The DVD-909 has a Speaker Setup feature that allows you to customize your surround sound setup.
1.
2.
3.
Press the SETUP button in play or stop mode.
Press the UP/DOWN button to select AUDIO
OPTIONS. Then press the ENTER button.
4.
Use the UP/DOWN or LEFT/RIGHT button to
select the desired item. Then press the ENTER
button.
5.
Use the UP/DOWN button to select speaker
mode desired. Then press the ENTER button.
Setting up SPEAKER MODE
Use the UP/DOWN button to select SPEAKER
SETUP. Then press the ENTER button.
• If you have connected the system to a speaker with low frequencies of 100Hz or below, select ‘Found(Large illustration)’.
• If you have connected the system to a speaker without low
frequencies of 100Hz or below, select ‘Found(Small illustration)’. If you don’t connect a subwoofer, always select
‘Found(Large illustration)’ for the Front Speakers(L/R).
• When you don’t have a particular speaker connected, select
‘Not found(No illustration visible)’.
SPEAKER SETUP
Speaker Mode
(Front L)
Channel
Balance
(Center)
OdB
Speaker Mode
(Center)
TEST
Speaker Mode
(Surround L)
Channel
Balance
(Surround L)
OdB
Delay Time
(Surround L/R)
Oms
Delay Time
(Center)
Oms
Speaker Mode
(Front R)
Setting up DELAY TIME
Channel
Balance
(Subwoofer)
OdB
Speaker Mode
(Subwoofer)
Channel
Balance
(Surround R)
OdB
Speaker Mode
(Surround R)
• When 5.1CH Surround Sound is played, you can enjoy the
best sound if the distance between you and each speaker is
the same. You can set Delay Time in the Center/Surround
Speaker to customize the sound to the acoustic of your room.
Ideal CENTER SPEAKER position
• Arrange all
speakers
within circle.
SPEAKER MODE
You can set a mode in the system that’s currently used.
Initially it is set as follows:
• Front speaker (L/R) : Found (Large illustration)
• Center speaker : Not found (No illustration visible)
• Subwoofer : Not found (No illustration visible)
• Surround speaker (L/R) : Not found (No illustration visible)
Ideal SURROUND SPEAKER position
You can customize the sound to conform to the acoustics of
your room by adding a delay effect to the sound of the Center
and Surround Speakers. Initially it is set as “Oms (milliseconds)”.
Distance of (B)(in)
6.56
13.12
19.68
TEST
Adjust the output level of a speaker by using test signals that
are memorized in the system. Initially it is set as “OdB”.
36
Setting(ms)
5.3
10.6
15.9
The test output signals come clockwise starting from the Front
Speaker(L). Adjust Channel Balance to match to the volume of
test signals memorized in the system.
CHANNEL BALANCE
Downloaded From Disc-Player.com Samsung Manuals
Setting(ms)
1.3
2.6
3.9
5.3
Setting up TEST
Test signals memorized in the system are sent to each
speaker.
Press RETURN button.
Distance of (A)(in)
1.64
3.28
4.92
6.56
• Setting SURROUND SPEAKERS
If the distance of Df is equal to the distance of Ds in the
above, set the mode as Oms. Otherwise, change the setting
according to the table on the right.
(B) = Df - Ds
DELAY TIME
How to make the SETUP MENU disappear or
return to menu screen during set up.
• Setting CENTER
SPEAKER
If the distance of Dc is
equal to or longer than the
distance of Df in the left
figure, set the mode as
Oms. Otherwise, change
the setting according to
the table below.
(A) = Df - Dc
FRONT(L)
SUBWOOFER
N
O
T
E
CENTER
FRONT(R)
SURROUND(R)
SURROUND(L)
• The subwoofer test output signal is lower than the other
speakers.
• The MPEG Multichannel logo is a trademark registered by
PHILIPS Corporation.
DVD
Setting Up Display Options
1.
2.
3.
Press the SETUP button in play or stop mode.
Use the UP/DOWN button to select DISPLAY
OPTIONS. Then press the ENTER button.
Use the UP/DOWN button to select the desired
item. Then press the ENTER button.
DISPLAY OPTIONS
1.
1
2
3
4
5
6
TV ASPECT
ANGLE MARK
STILL MODE
SCREEN MESSAGES
FRONT DISPLAY
BLACK LEVEL
WIDE
ON
AUTO
ON
AUTO
OFF
TV ASPECT : Depending on the type of television you have,
you may want to adjust the screen setting
(aspect ratio).
2.,3.,4.
ANGLE MARK : Use to turn on or off the on-screen displays
when DVDs plays multiple angles of a particular scene.
STILL MODE : Prevent picture shaking in still mode and display small text clearer.
SCREEN MESSAGES : Use to turn on-screen messages
on or off.
FRONT DISPLAY
Adjust the brightness of the unit’s front panel display.
BLACK LEVEL
4.
Use the UP/DOWN button to select the desired item. Then press the ENTER button.
1
4:3 LETTER BOX :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2
16:9 WIDE :
You can view the full 16:9 picture in your widescreen TV.
ANGLE MARK
1
2
2
3
4:3 PAN-SCAN :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3
1
ON : Displays ANGLE MARK in the upper right corner of
screen.
OFF : Doesn’t display it.
STILL MODE
FIELD : Select this feature when the screen shakes in the
AUTO mode.
FRAME : Select this feature when you want to see small letters more clearly in the AUTO mode.
AUTO : When selecting AUTO, FIELD/FRAME mode will be
automatically converted.
CHANGING
SETUP MENU
TV ASPECT
SCREEN MESSAGES
Use this feature to turn the on-screen displays on or off that
appear in screen.
FRONT DISPLAY
1
2
3
BRIGHT : It makes the Front Panel Display bright.
DIM : It makes the Front Panel Display dim.
AUTO DIM : It makes the Front Panel Display dim automatically when playing a DVD.
BLACK LEVEL
Adjust the brightness of screen.
37
Downloaded From Disc-Player.com Samsung Manuals
Controlling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to
your brand.
1.
2.
3.
Turn on the TV.
Point the DVD’s remote at the TV.
1.
While holding the TV POWER button down,
enter the code for your brand.
3.
TV Codes
CODE
BRAND
CODE
0
SAMSUNG A
OPEN/CLOSE
MITSUBISHI
1
SHARP B
AUDIO
SAMSUNG B
BRAND
2
SONY
SUB TITLE
SAMSUNG C
3
MAGNAVOX
DVD POWER
SHARP A
4
SANYO A
ANGLE
ZENITH
5
LG B
TOP MENU
LG C
6
RCA
MENU
DAEWOO
7
LG A
RETURN
SANYO B
8
TOSHIBA
REV SEARCH
EMERSON
9
HITACHI
REPEAT
SHARP C
SETUP
JVC
FWD SEARCH
SAMSUNG D
DISPLAY
PANASONIC A
BACK SKIP
PANASONIC B
e.g For Samsung A TVs
While holding down the TV button, enter 0.
4.
If the TV turns off, setup is complete.
Enter other codes of the same brand if the first code does
not work.
5.
To operate the TV, use the “TV Function
Buttons” described on page 13.
NOTE
The remote may not be able to control every model TV of the brands listed.
38
Downloaded From Disc-Player.com Samsung Manuals
Troubleshooting Guide
Proper function of your DVD player is mostly dependent on the discs you play. When some of the functions
indicated in the I/B do not work properly, it is highly probable that the disc is responsible. We strongly
recommend you review the instruction book before you start using the player. For your convenience, we
have enlisted some tips to help solve problems you might encounter while using the DVD player.
However, if the same problem occurs repeatedly, please contact your nearest service center.
Problem
Action
I/B
No operations can be
performed with remote.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote to reset it. Reinstall
batteries and try remote again.
P 13
Disc does not play
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a
DVD, a VIDEO-CD or a CD.
P 7, 18, 19
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. : 1)The DVD player is connected with the proper amplifier
2)The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
• Check if your audio system is connected and working properly.
P 7, 15, 17,
35, 36
The
icon appears on
screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out
of range.
P 13,
P 22 ~ 30
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
P 26 ~ 27
• Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function.
P 31 ~ 37
Playback mode differs
from the Setup Menu
selection
The screen ratio cannot be
changed.
P 37
No audio
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P 36
Forgot parental level
• With the power on, press and hold the STOP and PLAY/PAUSE button
on the player. This resets the password feature and all other settings
to the initial factory settings. You may be required to select a menu
language.
P34
If you experience other
problems.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center or call 1-800-SAMSUNG.
REFERENCE
• The Screen Ratio is fixed on your DVDs.
39
Downloaded From Disc-Player.com Samsung Manuals
Specifications
General
DVD-909
Power Requirements
AC 120 V, 60 Hz
Power Consumption
19 W
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
7.5 lbs
W 16.9 in x D 11.0 in x H 3.5 in
+41°F to +95°F
10 % to 75 %
Reading Speed : 11.45 ft/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
CD : 5 inches
(COMPACT DISC)
Reading Speed : 3.9 to 4.6 ft/sec.
CD : 31/2 inches
(COMPACT DISC)
Reading Speed : 3.9 to 4.6 ft/sec.
Disc
VCD : 5 inches
Maximum Play Time : 74 min.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min. (Video + Audio)
Composite Video
2 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Video
Output
Component Video
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
S-VIDEO
2 channel
5.1 channel
Output Level
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
F/L, F/R, R/L, R/R, C/T, S/W
Analog : 2 Vrms (1 kHz)
Digital : 1.15 Vp-p
Audio
Output
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
96 dB
*Total Harmonic Distortion
0.003 %
*: Nominal specification
40
Downloaded From Disc-Player.com Samsung Manuals
Specifications
DVD-709
Power Requirements
AC 120 V, 60 Hz
Power Consumption
17 W
Weight
General
Dimensions
Operating Temperature Range
Operating Humidity Range
7.5 lbs
W 16.9 in x D 11.0 in x H 3.5 in
+41°F to +95°F
10 % to 75 %
Reading Speed : 11.45 ft/sec.
DVD
(DIGITAL VERSATILE DISC)
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Disc
CD : 5 inches
(COMPACT DISC)
Reading Speed : 3.9 to 4.6 ft/sec.
CD : 31/2 inches
(COMPACT DISC)
Reading Speed : 3.9 to 4.6 ft/sec.
VCD : 5 inches
Maximum Play Time : 74 min.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min. (Video + Audio)
Composite Video
Video Output
S-VIDEO
2 channel
1 channel : 1.0 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Color Signal : 0.286 Vp-p (75 Ω load)
L, R
Analog : 2 Vrms (1 kHz )
Output Level
Digital : 0.50 Vp-p
Audio Output
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio
110 dB
*Dynamic Range
96 dB
0.003 %
REFERENCE
*Total Harmonic Distortion
*: Nominal specification
41
Downloaded From Disc-Player.com Samsung Manuals
42
Warranty (for USA users only)
Warranty (for Canada users only)
SAMSUNG
LIMITED WARRANTY
SAMSUNG
LIMITED WARRANTY
Samsung Electronics America Inc.(SEA), warrants that this product is free from defective
materials and workmanship.
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective
material and workmanship.
SEA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SEA
will repair or replace the product at its option.
SECA further warrants that if this product falls to operate properly within the specified
warranty period and the failure is due to improper workmanship or defective materials,
SECA will repair or replace the product at its option.
All warranty repairs must be performed by a SEA Authorized Service Center. (The name
and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
All warranty repairs must be performed by a SECA Authorized Service Center. (The name
and address of the location nearest you can be obtained by calling toll free:
1- 800- SAMSUNG)
LABOR
One year (Carry- in)
PARTS
One year
LABOR
One year (Carry- in)
PARTS
One year
On carry-in models, transportation to and from the service enter is the customer’s responsibility.
On carry-in models, transportation to and from the service enter is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time
service is requested.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time
service is requested.
EXCLUSIONS (WHAT IS NOT COVERED)
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of
God; misuse incorrect line voltage, improper installation, improper or unauthorized
repairs, commercial use or damage that occurs in shipping. Operations explained in the
instruction manual are not covered under the terms of this warranty. This warranty will
automatically be voided for any unit found with a missing or altered serial number. This
warranty is valid only on products purchased and used in the United States and Puerto
Rico.
Some states do not allow the exclusions or limitations of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state.
Downloaded From Disc-Player.com Samsung Manuals
This warranty does not cover damage due to accident, fire, flood and/ or other acts of
God; misuse incorrect line voltage, improper installation, improper or unauthorized
repairs, commercial use or damage that occurs in shipping. Exterior and interior finish,
lamps, glass are not covered under this warranty. Customer adjustments which are
explained in the instruction manual are not covered under the terms of this warranty. This
warranty will automatically be voided for any unit found with a missing or altered serial
number. This warranty is valid only on products purchased and used in Canada.
ELECTRONICS
SAMSUNG ELECTRONICS AMERICA INC.
105 CHALLENGER ROAD, RIDGEFIELD
PARK, NJ 07660 U.S.A.
FOR YOUR NEAREST SAMSUNG
SERVICE CENTER
DIAL 1-800-SAMSUNG
AH68-00074W
Downloaded From Disc-Player.com Samsung Manuals
Download PDF