Mirage | B-320-G | Mirage Catalog - About Ham Radio

MIRAGE
CATALOG
VHF/UHF Solid State Amplifiers
. . . 160 Watts on 2 Meters!
Turn your mobile, base or handheld into 160 Watt powerhouses and talk further, longer, clearer .
. . All modes: FM, SSB, CW . . . Superb GaAsFET preamp . . . Has exclusive Active-BiasTM system for crisp, clear voice in SSB mode . . . True push-pull circuitry and clean RF layout for
excellent stability . . . Overdrive and high SWR protection . . . Remote controllable with RC-2 . . .
MIRAGE’s most
In Stock at Ham Dealers Everywhere!
popular amplifier
B-2518-G
gives you 160 Watts
ED!
of output power for $
95 GE RUGG
A
just 25 W in from
MIR
your base/mobile rig! Suggested Retail
The B-2518-G is
ideal for your 20 to 60 Watt 2
Meter mobile or base
station.
You’ll talk further, longer, clearer
on all modes -- FM,
SSB, CW -- hear
weak signals better
than you’ve ever
heard before!
You get a low
noise 20 dB
GaAsFET preamp
with an excellent
0.6 dB noise figure
for pulling out
weak signals.
B-2518-G is
fully protected with features found in expensive commercial amplifiers.
High SWR or excessive input power can damage your amplifier.
Protection circuits automatically bypass your amplifier to
prevent damage and an LED lights to warn you.
369
Active-BiasTM gives crisp, clear voice in SSB mode!
New! An Active-BiasTMSystem keeps SSB voice crisp and
clear for fantastic operation. Other amplifiers using conventional bias methods tend to produce splatter and distortion as
power level changes. This amp with Active-BiasTM doesn’t
exhibit the problem.
The B-2518-G knows when you’re transmitting and
kicks in 160 Watts of power. Adjustable time delay gives
you smooth transmit/receive switching. Remote external keying. You
can remotely control your B-2518-G and place it out of the way. An
RC-2, $49.95, Remote Control turns Power on/off, Preamp On/Off and
select SSB/FM. Extra heavy duty
custom heatsink spans the
entire cabinet. Draws 1722A from 13.8 VDC.
Compact 12x3x5.5 inches.
Amp Remote Control
Remotely control your
B-2518-G/B-5018-G/B1018-G and place it out of
the way. An RC-2, $49.95,
Remote Control lets you turn
power on/off, preamp on/off,
select SSB/ FM. Other Mirage
amps use RC-1. Call Mirage for positive compatibility.
More 160 W, 2 Meter Amps
B-5018-G, $369.95. For 20 to 60W
mobile or base stations. 160 W out for 50W in.
B-1018-G, $409.95. 160 Watts out for 8
Watts in. For 0.25-15 Watt transceivers.
Power Curve -- typical output power in Watts
B-1018-G
B-2518-G
25
50
140 150 160 160
5
7
40
60
80
100 125 160 160 160
--
B-5018-G
Watts In
--
2
15
25
40
50
70
100 130 160
--
3
5
8
10
15
25
50
--
0.25 0.5
--
--
--
--
35
--
MIRAGE . . . 300 BruteForceTM Watts on 2 Meters!
739
B-5030-G
The MIRAGE B-5030-G gives you 300 Watts of brute power for
50 Watts input on all modes -- FM, SSB, or CW!
Ideal for 20 to 60 Watt 2 Meter mobile or base. Power Curve
Suggested Retail
chart shows typical output power.
Hear weak signals -- low noise GaAsFET preamp gives you
MIRAGE
excellent 0.6 dB noise figure. Select 15 or 20 dB gain.
Heavy-duty heatsink spans entire length of cabinet -- prevents
RUGGED!
overheating. Power transistors protected by Mirage’s Therm-OGuardTM.
Power Curve -- typical Mirage B-5030-G output power Fully protected from high SWR and excessive input power. Has
warning LED. Has smooth adjustable Transmit/Receive switching
B-5030-G ---- 55 150 220 300 with remote external keying.
Draws 48 amps at 13.8 VDC. Measures 12x12x5 inches.
$
B-2530-G
95
B-1030-G
10
30
30
80
Watts In
.5
1
95 140 250 300 --225 270 300 -3
5
10 25 50
More 300 Watt 2 Meter Amplifiers . . .
B-2530-G, $759.95. For 10 to 35 Watt mobile or base stations.
300 Watts for 25 Watts in.
B-1030-G, $759.95. Mirage’s most popular dual purpose HT or
mobile/base amplifier. 300 Watts out for 10 Watts in. For 0.2-15
Watt transceivers. Use RC-1, $49.95, Remote control
MIRAGE . . . the world’s most rugged VHF/UHF amplifiers!
. . . Dual Band 144/440 MHz Amp
Boost your dual band handheld to 45 Watts on 2 Meters or 35 Watts on 440 MHz . . .
Automatic Band Selection . . . Single connector for dual band radios/antennas . . .
Full Duplex operation . . . Reverse polarity protection . . . Mobile bracket . . .
NEW LOW PRICE!!! Get 50% more power on
2 Meters and 75% more
BD-35
440 MHz than our
$
95 on
nearest competition -for $60 less than their
Suggested Retail
list price!
199
Call your dealer for your best price!
• 45 Watts on 2 Meters / 35 Watts on 440 MHz
• Auto Band Selection • Works with all FM HTs
• Single Connectors for dual
band radios and antennas • Small size: 5x13/4x5”
• Full Duplex Operation • Includes mobile bracket
• “On-Air” LEDs • Reverse Polarity Protection
• One year Mirage Warranty
Power Curve -- typical Mirage BD-35 output power
Watts Out
(2 meters)
10
18
30
40
45
45
45
45+ 45+
45+
Watts In
(440 MHz)
4
10
16
26
32
35
35
35+ 35+
35+
Watts In
.25
0.5
1
2
3
4
5
Add this Mirage dual band amp and boost your HT to 45 Watts on
2 Meters or 35 Watts on 440 MHz!
Your handheld becomes a powerful mobile or base when you need it.
Turn “You’re breaking up . . . Can’t copy” into “Solid copy . . . Go ahead.”
Talk further . . . Reach distant repeaters . . . Log onto faraway packet
bulletin boards.
Works with all FM handhelds up to 7 Watts. Power Curve chart
shows typical output power for your input power.
Full Duplex Operation
Mirage’s exclusive FullDuplexAmpTM lets you talk on one band and
listen on the other band at the same time -- just like a telephone conversation! (Requires a compatible HT).
Mirage BD-35 gives you the most for your money! Here’s why . . .
. . . Automatic frequency band selection -- you’ll never forget to
switch bands
. . . Single input connector and single output connector for both
6
8
7
bands -- easy to use with dual band radios and antennas
. . . First-class strip-line techniques -- superb RF performance and reliability
. . . Custom wrap-around heatsink -- provides excellent heat distribution
. . . Reverse Polarity Protection -- saves your amp if you connect
power backward
. . . Automatic RF sense transmit/receive switch -- makes operation
easy
. . . Low input SWR -- keeps your handheld safe from overheating
. . . “On Air” LEDs -- tell you which band is transmitting . . . Free
mobile mounting bracket
New SMA to BNC Adaptors
. . . Small size: just
3
MFJ-7716,
MFJ-7718,
MFJ-7719,
5x1 /4x5 inches
$4.95 each.
$4.95 each.
$4.95 each
. . . Full one year
SMA
SMA male
SMA male
MIRAGE warranty
female to
to BNC
to SO-239
BNC male.
female.
connector.
MIRAGE HT or Mobile amplifier for 2-Meters!
Use .25 to 10 Watt Handheld or 10 to 50 Watt Mobile Transceiver! Two amps in one! All modes: FM/SSB/
CW 2-Meter Operation! Low Noise 15 dB GaAsFET preamp! Wrap-around Heatsink! Protection Modes!
B320-G
and comes completely alive with 200 BruteForceTM
Watts.
Get all mode FM/SSB/CW 2 Meter operation.
Suggested Retail
Low noise 15 dB GaAsFET preamp lets you dig out
really weak stations and can be used even if your B-320-G is off.
On/Off switch with “power on” LED.
Has SWR Protection with LED, RF sense Transmit/Receive Switch
and Reverse Polarity Protection.
Wrap-around heatsink and quiet cooling fan gives excellent heat
dissipation for cool operation in a super compact 73/4Wx23/4Hx93/4D
inches that’ll fit anywhere. Has Mirage’s superb one year warranty that
covers parts and labor for one full year.
Includes free mobile mounting brackets and free mobile patch cable.
$
MIRAGE’s BruteForceTM dual purpose amplifier gives you 200
Watts of brutal power from your low power handheld or high power
mobile transceiver!
It’s really two amplifiers in one. A switch selects .25 to 10 Watt
Handheld Amp or 10 to 50 Watt Mobile Amplifier. You can plug your
HT into it at home, then carry it on the road with you for your mobile!
MIRAGE’s exclusive LED PowerGRAPHTM indicates output power
2
499
95
Power Curve -- typical B-320-G output power
Watts Out
Mobile Amp
1.5
4
32
95
165
186
193
200
Watts Out
HT Amp
132
165
200
--
--
--
--
--
Watts In
.25
0.5
3
10
25
35
40
50
http://www.mirageamp.com
. . . 100 Watts . . .
$
249 95!
Boost your 2-Meter HT or multimode to a super powerful 100 Watts . . . All modes:
FM, SSB, CW . . . 15 dB GaAsFET receive preamp . . . Reverse polarity protection . . .
silent cooling fan . . . free HT-to-amp coax and mobile bracket! Plus much, more!
In stock at ham dealers everywhere!
Call your dealer for your best price!
249
$
B-310-G
MIRAGE
RUGGED!
95
Suggested Retail
Power Curve -- typical Mirage B-310-G amplifier output power
Watts Out
25
50
75
95
Watts In
.25
0.5
1
2
100 100 100 100+ 100+ 100+
3
4
For an incredibly low $249.95, you can
boost your 2-Meter handheld to a powerful 100 Watt mobile or base station!
6
5
8
7
amp
gives you 15 dB
gain -- lets you dig out weak signals.
Fully Protected
SWR Protection prevents damage from
antennas whipping in the wind. Reverse
Polarity Protection can save your amp if you
connect power backwards.
Turn “You’re breaking up . . . Can’t copy”
into “Solid copy . . . Go ahead.”
Talk further . . . Reach distant repeaters . . .
Log onto faraway packet bulletin boards.
This rugged Mirage B-310-G amplifier
operates all modes: FM, SSB and CW. It’s
perfect for all handhelds up to 8 Watts and
multi-mode SSB/CW/FM 2 Meter rigs.
Compact but Powerful
Mirage’s integrated HeatsinkCabinetTM and
whisper quiet fan gets heat out fast!
The results? An ultra-compact 43/4x13/4x73/4
inch 21/2 pound amplifier that delivers a super
powerful 100 Watts. It’ll get you through the
most congested bands and snag a rare contact!
Low Noise GaAsFET
Preamp
A built-in low noise GaAsFET receive pre-
Free Accessories
Free 3 foot handheld to B-310-G coax cable
-- just plug and play! Free mobile bracket!
Free rubber mounting feet!
Plus More . . .
Automatic RF sense Transmit/Receive
switch. Remote keying jack. LEDs monitor
“On-Air”, high SWR, pre-amp, power. Push
buttons select SSB/FM, pre-amp, power.
Draws 15 Amps at 12-15 VDC.
Full one year MIRAGE warranty
With MIRAGE’s legendary ruggedness,
you may never need our superb warranty.
. . . 35 Watts for handhelds
Add this Mirage amp to your 2-Meter handheld and get 35 Watts output . . . Talk
further, longer, clearer . . . 18 dB GaAsFET preamp . . . All modes: FM, SSB, CW . . .
Mobile bracket . . . Reverse Polarity Protection . . . Works with all handhelds . . .
129
$
B-34-G
For an incredibly
low 119 , you can
95 boost
your 2-Meter
$
95
HT to 35 Watts -the power of a costly mobile transceiver!
Your handheld becomes a
powerful mobile or base when you
need it -- for a lot less money.
Turn “You’re breaking up . . .
can’t copy you” into “Solid copy .
. . go ahead.”
Talk further . . . Reach distant
repeaters . . . Log onto faraway
packet bulletin boards.
This rugged Mirage amplifier
operates all modes: FM, SSB, and
CW. Unlike lesser FM only
handheld amps, the B-34-G is
Suggested Retail
Call your dealer for your best price! • 35 Watts Output • All modes: FM, SSB, CW
• 18 dB GaAsFET Preamp • Reverse Polarity Protection • Free Mobile Bracket
• Works with all HTs up to 8 Watts • Auto RF sense T/R switch
Power Curve -- typical Mirage B-34-G amplifier output power
Watts Out
8
12
18
30
33
35
35
35
35
35
Watts In
.25
0.5
1
2
3
4
5
6
7
8
perfect for both
HTs and multimode 2 Meter
rigs.
A bult-in low
noise GaAsFET
http://www.mirageamp.com
receive preamp gives you 18 dB gain -- lets
you dig out weak signals. 51/4x13/4x43/4 in.
Works with all handhelds up to 8 Watts.
Power Curve chart shows typical output power
for input power.
MIRAGE’s B-34-G is the best handheld
amplifier money can buy! Here’s why . . .
First Class strip-line techniques and modular construction -- gives you superb RF performance and unsurpassed reliability.
Custom heatsink provides excellent heat
distribution -- runs cool for extra long life.
Reverse Polarity Protection -- this Mirage
feature can save your amp -- and your pride -if you connect power backward.
Automatic RF sense transmit/receive
switch -- makes operation easy. Low input
SWR -- keeps your handheld safe from overheating.
Individual pushbutton switches -- lets you
select FM/SSB operation, receive preamp
on/off and power on/off. LED indicators -signal on-air, receive preamp on, power on.
Free mobile mounting bracket and mounting hardware. Full one year Mirage Warranty.
Legendary Mirage ruggedness.
35 Watts, FM only . . . $10995
B-34, $10995. 35 Watts out for 2 in. Similar
to B-34-G, but FM only. Less preamp, mobile
bracket. 31/8x13/4x41/4” tiny -- fits anywhere!
3
PREAMPLIFIERS - HF/VHF/UHF
KP-1
149
$
KP-2
95
199
Suggested Retail
$
95
Suggested Retail
MODEL KP-1 InShack Model Features:
A. KP-1/10M
• Automatic RF Switching
B. KP-1/6M
• GaAsFET boosts weak receive signals
C. KP-1/2M
D. KP-1/220MHz • In-Line design for easy operation
E. KP-1/440MHz • High or Low switchable gain setting
MODEL
KP-2 Mast Mount Model Features:
A. KP-2/10M
• Automatic RF Switching
B. KP-2/6M
• GaAsFET boosts weak
receive signals
C. KP-2/2M
• Mast Mounted design to reduce loss
D. KP-2/220MHz • In-Line design for easy operation
E. KP-2/440MHz • High or Low switchable gain setting
FREQUENCY
A. 28-30 MHz
B. 50-54 MHz
C. 144-148 MHz
D. 220-225 MHz
E. 430-450 MHz
FREQUENCY
A. 28-30 MHz
B. 50-54 MHz
C. 144-148 MHz
D. 220-225 MHz
E. 430-450 MHz
KP-1 In-Shack Model Features:
• Gain: from 15 dB to greater than 25 dB
• Noise: less than 0.6 dB
• Power Handling: 100 Watts
• Size: 41/4Wx25/16Hx13/16D inches
KP-2 Mast Mount Model Features:
• Gain: from 15 dB to greater than 25 dB
• Noise: less than 0.6 dB
• Power Handling: 100 Watts
• Voltage: 12-15 VDC
• Size: 41/4Wx25/16Hx13/16D inches
. . . 6 Meter Amplifier
Bust through 6 Meters with 150 Watts of brute power and work exotic DX!
MIRAGE RUGGED!
FCC TYPE ACCEPTED
Low Noise GaAsFET Preamp
A built-in low noise GaAsFET receive preamp gives you 20
A-1015-G
$
95
dB gain -- lets you dig out weak signals and score exotic DX
on sporadic E!
Suggested Retail
The A-1015-G is the world’s most popular all mode
FM/SSB/CW 6 Meter amplifier.
Bust through 6 Meters with 150 Watts of brute power and work
exotic DX! Power Curve chart shows typical output power.
The A-1015-G is ideal for your 1 to 15 Watt transceiver, mobile or
base station.
You’ll talk further, longer and clearer on all modes -- FM, SSB or
CW. Hear weak signals better than you’ve ever heard before. Get up
to 150 powerful Watts!
Extra heavy-duty heatsink spans entire length of cabinet.
Draws 18-22 amps at 13.8 VDC. Weighs just 5 lbs., measures a
compact 12x3x5.5 inches.
389
Power Curve -- typical A-1015-G ouput power
Watts Out
6
22
42
63
84
98
122
142
150
150+
Watts In
.25
1
2
3
4
5
7
9
10
15
For your nearest MIRAGE dealer:
Call 800-647-1800
For Technical Information:
Call 662-323-8287
MIRAGE products are distributed by many fine MIRAGE dealers worldwide. For dealers in Canada and other
countries, please contact MIRAGE, 300 Industrial Park Road, Starkville, Mississippi, USA. • VOICE: 662323-9715 • FAX: 662-323-6551 • WEB SITE: http://www.mirageamp.com
Technical Information MIRAGE, 300 Industrial Park Road, Starkville, MS 39759 USA.
Phone: 662-323-8287, FAX: 662-323-6551
Warranty Information MIRAGE amplifiers and accessories are warranteed for (1)
one year (parts and labor).
All prices and specifications are subject to change without notice or obligation. Catalog 09/08 (c) 2009 MIRAGE COMMUNICATIONS EQUIPMENT.
4
http://www.mirageamp.com
MIRAGE 11/4 METER AMPLIFIERS --- 223-225 MHz
C-22-G
C-106-G
C-211-G
C-1012-G
2W In - 20 W Out
10W In - 60 W Out
2W In - 110 W Out
10W In-110 W Out
$
SPECS:
RF Power In:
RF Power Out:
Current/Volts:
Size:
Weight:
95
169
Suggested Retail
95
269
Suggested Retail
95
369
Suggested Retail
95
369
Suggested Retail
100 mW to 5 Watts
20 Watts
5 Amps@13.8 Volts
3.5x2x7 inches
1.25 lbs.
300 mW to 15 Watts
60 Watts
10-12 Amps@13.8 V
8x3x5.5 inches
3 lbs.
300 mW to 4 Watts
110 Watts
25 Amps@13.8 V
12x3x5 inches
5 lbs.
300 mW to 15 Watts
120 Watts
18-20 Amps@13.8 V
12x3x5.5 inches
5 lbs.
$
$
C-2512-G
C-5012-G
C-1022-G
C-2522-G
C-5022-G
25W In-120W Out
50W In-120W Out
10W In-220W Out
25W In-220W Out
50W In-220W Out
$
95
345
SPECS:
RF Power In:
RF Power Out:
Current/Volts:
Size:
Weight:
$
$
95
$
364
95
$
759
95
759
$
73995
Suggested Retail
Suggested Retail
Suggested Retail
Suggested Retail
Suggested Retail
300 mW to 5 W
120 Watts
18Amps@13.8 Volts
12x3x5.5 inches
5 lbs.
35W to 55 W
120 Watts
18Amps@13.8 Volts
12x3x5.5 inches
5 lbs.
1 W to 10 W
220 Watts
48Amps@13.8 Volts
13x10x5 inches
13 lbs.
1 W to 30 W
220 Watts
48Amps@13.8 Volts
13x10x5 inches
13 lbs.
35 W to 55 W
220 Watts
48Amps@13.8 Volts
12x3x5.5 inches
13 lbs.
MIRAGE COMMERCIAL POWER AMPLIFIERS
VHF Commercial Amplifiers
429
Designed
for
heavy duty
commercial
use!
$
PAC-10-70-B
29995
Suggested Retail
150-174 MHz
x4 MHz
FEATURES:
• Over-temp Protection
• Heavy-duty heatsink, finned on 3 sides.
SPECIFICATIONS:
PAC-10-70B:
Power Out . . . . . . . 70 Watts at 10 Watts in
Power In . . . . . . . . . . . . . . 1/2 to 15 Watts
PAC-30-130B:
Power Out . . . . . . 130 Watts at 30 watts in
Power In . . . . . . . . . . . . . . . 10 to 30 Watts
$
PAC-30-130-B
35995
Suggested Retail
UHF Commercial Amplifier
PAC-15-100C
$
95
Suggested
Retail
150-174 MHz
x6 MHz
Specs for both amps:
Frequency Coverage . . . . . . . (Any 4 MHz)
150-174 MHz
VSWR . . . . . . . . . . . . . . . Less than 1.5:1
Impedance . . . . . . . . . . 50 Ohms, nominal
Supply Voltage . . . . . . 13.8 VDC nominal
nominal (11-16 VDC)
Supply Current . . . . . . . . . 8 Amps nominal
Connectors . . . . . . . . . . . . . . . . . SO-239
RCA phono jack (remote control)
Service . . . . . . . . . . . . FM, multi-purpose
FEATURES:
• Over-temp Sensing that Bypasses Amp
when safe operating temperatures are
exceeded.
• Heavy-duty heatsink, finned on 3 sides.
SPECIFICATIONS:
Power Out . . . . 100 Watts at 10 watts in
Power In . . . . . . . . . . . . . . . . 5 to 25 Watts
Frequency Coverage . . . . . 450-475 MHz
VSWR . . . . . . . . . . . . . . . . Less than 1.5:1
450-470 Mhz in bypass mode
Impedance . . . . . . . . . 50 Ohms, nominal
Supply Voltage . . . . . . . 13.8 VDC nominal
nominal (11-16 VDC)
Supply Current . . . . . . . . . . 20-23 Amps
Connectors . . . . . . . . . . . . . . . . . . SO-239
RCA phono jack (remote control)
Size . . . . . . . . . . 2.375Hx7Wx10D in.
Service . . . . . . . . . . . . FM, multi-purpose
Commercial handheld Amp, 30 Watts Out. . . $15995
Mirage’s B-34-GC is a two-way radio
signal amplifier ( or booster) designed for
commercial mobile or fixed location use.
This amplifier is specifically designed to
boost the range of low power (less than 3
Watts output) mobile or handheld two-way
radios by increasing output power nearly
ten times.
This unit also contains a receive signal
booster that increases the signal level of
incoming signals.
FEATURES:
• Output power of 15 to 30 Watts.
• Wide input power range
(from 1/2 to 3 Watts).
• GaAsFET receive
amplifier to
boost reception of weak
stations.
FCC
Type
Accepted
SPECIFICATIONS:
Frequency: 150-162 MHz
Duty Cycle: Intermittent (ICAS)
RF Input: 3 Watts Maximum
RF Output: 25 Watts TYPICAL
RF Connectors: SO-239 (2) UHF Female
Receive Preamp: 18 dB TYPICAL
http://www.mirageamp.com
B-34-GC
$
15995
Suggested
Retail
Supply Voltage: 11-15 VDC
Negative Ground
Transmitting Current: Less than 4 Amps
Fuse: Fast Blow, 7 Amp
Input/Output Impedance: 50 Ohms
Warranty: 1 year parts and labor
5
REPEATER AMPLIFIERS - VHF/UHF
MIRAGE Repeater Amplifiers are designed for continuous duy service
250, 144 and 220 MHz Models
FEATURES:
Cool Running - A 10” high by 19” wide
full finned rack-mounted heatsink keeps the
transistor temperatures low for long life.
The chassis cover is perforated so air convection will keep the circuit board area
cool.
Dual Protection - The amplifiers have
two temperature sensors; one on the
heatsink and one on the circuit board. If
conditions cause either to overheat, the
amplifier will shut off until it cools down
to a safe temperature.
Bypass Mode - These models will feed
the exciter output straight through to the
antenna in an over-temperature condition.
The bypass mode can also be remotely
selected by proper interfacing to the
repeater controller. Either a relay contact
or a TTL logic can be used to select the
bypass mode or amplified mode of operation.
Reduced Relay
Wear - The amps
have a selectable
long release time
(adjustable up to 5
seconds) for the RF
change-over relay.
This prevents unnecessary action during
repeater operation.
On-site Control The bypass mode
and relay release
time can be selected
with built-in switches. The operational
MIRAGE RC-1
remote control box
can be used to switch
these functions up to
18 feet away from
the amplifier.
Repeater Amp Specifications/Power Curve Chart
MHz
Freq.
Range
Model
Number
Watts
Power
Input
50-52
A1015R
.25-5
$
98
145-148
B1018R
.25-3
$
145-148
B2518R
0.5-10
223-225
C211R
Suggest Max cont Amps
Retail
Output Nominal
(Watts) Current
Power
Supply
(VDC)
RF
Connect
18-20
13.8
TeflonR
SO-239
130
18-20
13.8
$
111
16-18
13.8
.25-0.5
$
80
18-20
13.8
95
96
18-20
13.8
62595
90
16-18
13.8
95
68995
TeflonR
SO-239
TeflonR
SO-239
TeflonR
SO-239
TeflonR
SO-239
TeflonR
SO-239
TeflonR“N
UG58AU
TeflonR“N
UG58AU
TeflonR“N
UG58AU
TeflonR“N
UG58AU
57995
62995
59995
65995
223-225
C1012R
.25-6
$
223-225
C2512R
.05-15
$
440-450 D1010NR
.25-4
$
80
15-16
13.8
440-450 D3010NR
1-15
$
75
14-15
13.8
420-450
ATV
D100ATVNR
.25-1
$
52
14-15
13.8
420-450
D1010ATVNR
.25-4
$
80
16-18
13.8
440 MHz and ATV
ATV Models
FEATURES
Cool Running - A 10” high by 19” wide
full finned rack-mounted heatsink keeps the
transistor temperatures low for long life.
The chassis cover is perforated so air convection will keep the circuit board area
cool. The RF board is low loss TeflonR for
minimum dielectric heating.
Reliable - The RF change-over relay has
been eliminated on this model to provide
the highest order of reliability. TeflonR con-
659
719
68995
68995
nectors are standard on this well-designed
unit.
Protection - The amplifier will shut off
if conditions cause the heatsink temperature
to rise to an unsafe level of operation.
All Mode Operation - Class AB linear
operation is rated for FM, SSB, CW and
ATV operation.
1 YEAR WARRANTY ON ALL
REPEATER AMPLIFIERS
Warranty - Mirage repeater amplifiers
are guaranteed for one year against failure
due to defective workmanship or materials.
SWR/Wattmeters - HF - VHF - UHF
Mirage precision SWR/Wattmeters read
53/4Wx41/2Hx53/4D inches. Weighs just 3.5
peak or average reading and SWR directly
lbs. Four models to choose from: 1.8 to 30
on an extra high quality meter movement.
MHz, 50 to 200 MHz, 420 to 450 MHz,
Doesn’t require extra charts/graphs. Reads
and 1260 to 1300 MHz. Each has Mirage’s
forward or reflected power, peak or average superb one year parts and labor warranty.
and SWR at-a-glance.
Mirage precision
SWR/Wattmeters also feature negligible insertion
MODEL Suggested FREQ
SWR POWER
loss, a remote coupler
mounting, low battery indi- Number: Retail:
MHz:
SENS: RANGE
cator, and a large 5-inch
$
23595
MP-1
1.8 to 30 1-2 Watts 2000 W
easy-to-read meter. Line
$
23595 50 to 200 1-2 Watts 1500W
MP-2
impedance is 50 Ohms.
$
Requires 9-13.6 VDC or 9
26595 420 - 450 5 Watts
MP-3
150 W
Volt battery, not included.
$
95
279
MP-4
1260-1300
1
Watt
1/10/100
Measures a compact
SPECIFICATIONS:
VHF/UHF SWR/Wattmeter
Mirage’s new MP-13 dual band VHF/
UHF SWR/Wattmeter covers 140 to 525
MHz in 5, 20, and 200 Watt power ranges.
A large 2.6-inch precision illuminated
meter makes for easy wide-angle viewing.
A highly visible black and red meter
scale on a bright, white background makes
it quick and easy to read SWR, forward or
reflected power. Lamp requires 13.8 VDC
or 110 VAC operation.
A functional and simple front panel layout lets you select power ranges, forward/
reflected power or make SWR readings
intuitively. Features a large SWR scale that
6
extends the full view of the
MP-13
$
95
meter. 3:1 SWR is centered at mid-scale to give
Ship Code A
you precision, wide-range
measurements.
The MP-13 lets you read peak or average
power or SWR, and forward or reflected
power. Has convenient meter adjustment
hole, and calibration knob on front panel.
The Mirage MP-13 is housed in an all
metal cabinet with rubber feet and protected by a durable black paint. An attractive
designer injection molded black front panel
perfectly matches any transceiver and looks
89
http://www.mirageamp.com
expensive in any station.
Air dielectric SO-239 connectors with
gold-plated silver pins gives superb performance to 525 MHz. MP-13 is precisely
factory calibrated for accurate measurements. Measures 6Wx21/2Hx4D inches.
MIRAGE AMPLIFIER SPECIFICATIONS
Model
Number
Input Amps Wt Size Pre Retail
Typical Power Out for Watts In
Power (Max) lbs. wxhxd Amp Price
.25 0.5 1 2 3 5 6 8 10 15 20 25 35 50
Range @13.8V
inches Gain
6 Meters, 50-52 MHz
A-1015-G
.25-15
22
5 12x3x6 20dB 389.95 6
10
22
42
63
98 115 133 150
33
33
35
35
150+
__
__
__ _
--
2 Meters, 144-148 MHz
.25-8
.25-8
4
4
21/2 3x2x4 NO 99.95 8
1
/2
5x2x5 18dB 129.95 8
35
35
----
----
----
----
----
----
BD-35 (dual band) .25-8
7
21/2 5x2x5 NO 199.95 10 18 30 40 45 45 45 45
--
--
--
--
--
--
B-310-G
.25-8
B-320-G (HT) .25-50
B-320-G (mobile) .25-50
15
25
25
21/2 5x2x8 15dB 249.95 25 50 75 95 97 100 100 100 -- -- -- -- -- -5 8x3x10 15dB 499.95 132 165 175 190 200 -- -- -- -- -- -- -- -- -5 8x3x10 15dB 499.95 1.5 4 10 24 32 48 64 82 95 135 148 165 186 200
25
22
22
48
48
48
5
5
5
15
15
15
B-34
B-34-G
B-1018-G
B-2518-G
B-5018-G
B-1030-G
B-2530-G
B-5030-G
.25-15
0.5-30
1-60
.5-20
.5-35
.5-60
12x3x6 20dB 409.95
12x3x6 20dB 329.95
12x3x6 20dB 329.95
13x10x5 20dB 759.95
13x10x5 20dB 739.95
13x10x5 20dB 739.95
12
12
25 50
7
5
-- 2
-- -3.5 10
-- --
18
18
30
30
35
35
80 110 140 150 160 160
16 32 40 60 70 80
9 15 25 35 40
5
30 80 177 225 270 286
30 63 95 140 160 205
10 17 29 55 65 90
160
100
50
300
250
150
-125
70
300
272
180
-145
85
300
300
200
-160
100
300
300
220
--130
--260
--160
--300
11/4 Meters, 223-225 MHz
C-22-G
C-211-G
C-106-G
C-1012-G
C-2512-G
C-5012-G
C-1022-G
C-2522-G
C-5022-G
.1-5
.3-5
.3-15
.3-15
.3-40
.35-55
.25-10
.25-30
.35-55
5
25
12
20
18
18
48
48
48
11/4 4x2x7 20dB 169.95
5 12x3x6 20dB 369.95
3 8x3x6 20dB 269.95
5 12x3x6 20dB 369.95
5 12x3x6 20dB 345.95
5 12x3x6 20dB 365.95
15 13x10x5 20dB 759.95
15 13x10x5 20dB 759.95
15 13x10x5 20dB 739.95
6 10 20 30 36
3
50 80 103 110 120 126
5 11 23 34 46
3
6 10 15 34 51 83
-- .5 6 14 21 38
-- -- 3 11 17 31
-- -- 40 90 115 160
1.5 5 12 29 45 79
-- -- 5 10 20 40
--51
95
47
42
185
102
50
--57
108
60
65
200
140
70
--60
120
70
77
220
162
90
--60
-92
82
-193
115
----107
87
-217
140
----120
93
-220
160
-----108
--195
-----120
--220
--
--
--
--
--
--
--
--
------
------
70 Centimeters, 420-450 MHz
D-26-N
.4-5
12
4 8x3x7 NO 299.95 17 34 51 60 60 60
BD-35 (dual band)
D-100ATVN
D-1010N
D-1010-ATVN
D-3010-N
.25-8
0.5-5
.30-15
1-15
5-45
7
20
20
20
20
2
5
5
5
5
5x2x5
12x3x6
12x3x6
12x3x6
12x3x6
NO
NO
NO
NO
NO
199.95
449.95
419.95
439.95
389.95
4
15
5
5
--
10
32
16
16
--
16
52
28
28
7
26
-53
53
12
32
-73
73
17
35
-85
85
22
35 35 -- --- -- -- -90 100 110 -90 100 -- -25 35 50 75
-- --- --- --- -85 100
VHF/UHF Commercial Band Amplifiers
PAC-10-70-B
PAC-15-100-C
PAC-30-130-B
.25-10
.25-15
.25-30
8
23
8
4 3x7x8 NO 299.95 5
5 3x7x10 NO 429.95 5
5 12x3x6 NO 329.95 1
8
8
3
12
10
7
18
15
10
26
20
14
40
50
25
47
60
30
60
70
40
70 -- -80 100 -50 80 100
(150-174 MHz)
(450-475 MHz)
(150-174 MHz)
Mirage Repeater Amplifiers
A-1015-R, 6 Meters .25-5
20
12 10x19 NO 579.95 6
10
22
63
98
--
--
--
--
--
--
--
.25-3
0.5-10
.25-6
0.5-15
.25-4
20
18
20
18
18
12
12
12
12
12
NO
NO
NO
NO
NO
30
.5
16
-16
60 100 130
11 24 35
28 53 73
7 12 17
28 53 73
-56
-22
80
-69
-25
--
-- -- -91 111 --- -- -35 50 75
-- -- --
------
------
------
------
B-1018-R, 2 Meters
B-2518-R, 2 Meters
D-1010-NR, 70 CM
D-3010-NR, 70 CM
D-1010-ATVN-R
ATV 70 CM
10x19
10x19
10x19
10x19
10x19
629.95
579.95
689.95
659.95
689.95
15
-5
-5
42
http://www.mirageamp.com
--
7
70 cm AMPLIFIERS - 420-450 MHz - UHF
ALL UHF MODELS FEATURE . . .
• All-Mode FM, SSB, CW
• ATV Models Available
• Adjustable Delay for SSB
• Remote Control Outlet
D-26-N
D-1010-N
D-3010-N
2W In-60W Out
10W In-100W Out
30W In-100W Out
FEATURES
FEATURES
FEATURES
Special for ATV Service as
well as SSB and FM
1W in will
give 51W out
Excellent for HTs
430-450 MHz
SSB/FM
Can be modified
for ATV Service
430-450 MHz
SSB/FM
$
SPECIFICATIONS
RF POWER IN. . . . . . . . .
RF POWER OUT . . . . . . .
CURRENT . . . . . . . . . . . .
SIZE . . . . . . . . . . . . . . . . .
WEIGHT . . . . . . . . . . . . .
95
299
Suggested Retail
$
95
449
Suggested Retail
95
419
Suggested Retail
400mW to 5 Watts
2 W in, 60 Watts out
12 Amps nominal
8.25”x2.5”x7”
4 lbs.
300mW to 15 Watts
10W in, 100 W out
20 Amps 12”x3”x5.5”
6 lbs.
5 W to 45 Watts
45W in, 100 W out
20 Amps
12”x3”x5.5”
4 lbs.
AMATEUR TELEVISION
AMPLIFIERS, 420-450 MHz
D-1010-ATVN
D-100-ATVN
10W In-52W Out
(ATV-AVG)
10W In-82W Out
(ATV-PEP)
10W In-100W Out
(SSB/FM)
420-450 MHz
$
95
2W In-52W Out
(ATV-AVG)
2W In-82W Out
(ATV-PEP)
2W In-100W Out
(SSB/FM)
420-450 MHz
$
95
469
479
Specifically designed for Amateur Television
SPECIFICATIONS
RF POWER IN. . . . . . . . .
RF POWER OUT . . . . . . .
CURRENT . . . . . . . . . . . .
SIZE . . . . . . . . . . . . . . . . .
WEIGHT . . . . . . . . . . . . .
• 50 Ohm Impedance (in/out)
• Voltage 13.8 vDC
D-1010-ATVN
1 Watt to 15 Watts
100W (SSB/FM) 52W (ATV)
20 Amps
12x3x5.5 inches
6 pounds
D-100-ATVN
500 mWatts to 5 Watts
52 Watts
20 Amps
12x3x5.5 inches
6 pounds
COMMUNICATIONS EQUIPMENT
300 Industrial Park Road
Starkville,, MS 39759 USA
TO:
$
RC-1 - Remote Control Head
Use with Most Models
RC-1
$
4995
Suggested Retail
FEATURES
• Easy remote operation with most models
• Preamp on/off
• Switch for SSB/FM operation
• 18 foot cabling included - Available in
long lengths with special order
• Size: 31/2Wx23/4Dx11/2H inches
• Mod required for some models
•Compatible with all Mirage amps except
for the following amplifiers: B-XX18-G, B24-G, B-34, B-34-G, B-310-G, B-320-G,
BD-25, BD-35, B-510-G, C-22-G, D-15-N,
D-26-N, M-120-G, PAC-1070-B, PAC-15100C, PAC-30-130-B.
Bulk Rate
U.S. Postage
PAID
Starkville, MS
39759
Permit No. 19
Download PDF