BCR08AM-14A Data Sheet (700V-0.8A

BCR08AM-14A Data Sheet (700V-0.8A
Preliminary Datasheet
BCR08AM-14A
R07DS1226EJ0400
Rev.4.00
Aug 25, 2015
700V-0.8A-Triac
Low Power Use
Features








IT (RMS) : 0.8 A
VDRM :700 V
IFGTI, IRGTI, IRGTIII : 5 mA
RoHS Compliant
Non-Insulated Type
Planar Passivation Type
Halogen-free options available (#BD0)
Completely Pb-free package (PRSS0003DJ-A)
Outline
RENESAS Package code: PRSS0003EA-A
(Package name: TO-92*)
RENESAS Package code: PRSS0003DJ-A
(Package name: TO-92)
2
1. T1 Terminal
2. T2 Terminal
3. Gate Terminal
3
1
3
1
2
1
3
2
Applications
Washing machine, electric fan, air purifier, electric pot, rice-cooker, electric blanket, refrigerator, Solid State Relay,
and other general purpose AC control applications
Maximum Ratings
Parameter
Voltage class
14
700
840
Symbol
Repetitive peak off-state voltageNote1
Non- repetitive peak off-state voltageNote1
Notes: 1. Gate open.
Parameter
Symbol
VDRM
VDSM
Unit
V
V
Ratings
Unit
RMS on-state current
IT (RMS)
0.8
A
Commercial frequency, sine full wave
360 conduction, Tc = 67C
Surge on-state current
ITSM
8
A
60 Hz sinewave 1 full cycle, peak value,
non-repetitive
I2t
0.26
A2 s
PGM
PG (AV)
VGM
IGM
Tj
Tstg
1
0.1
6
0.5
– 40 to +125
– 40 to +125
W
W
V
A
C
C
—
0.23
g
I2t for fusing
Peak gate power dissipation
Average gate power dissipation
Peak gate voltage
Peak gate current
Junction temperature
Storage temperature
Mass
Conditions
Value corresponding to 1 cycle of half
wave 60 Hz, surge on-state current
Typical value
Notes: 1. Gate open.
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
Page 1 of 7
BCR08AM-14A
Preliminary
Electrical Characteristics
Parameter
Repetitive peak off-state current
On-state voltage
Gate trigger voltageNote2
Gate trigger currentNote2
Gate non-trigger voltage
Thermal resistance
Critical-rate of rise of off-state
commutating voltageNote4
Symbol
IDRM
VTM
Min.
—
—
Typ.
—
—
Max.
1.0
2.0
Unit
mA
V
Test conditions
Tj = 125C, VDRM applied


VFGT
VRGT
—
—
—
—
2.0
2.0
V
V

VRGT
—
—
2.0
V

IFGT
—
—
5
mA

IRGT
—
—
5
mA

IRGT
—
—
5
mA
VGD
Rth (j-c)
0.1
—
—
—
—
50
V
C/W
Tj = 125C, VD = 1/2 VDRM
Junction to caseNote3
(dv/dt)c
0.5
—
—
V/s
Tj = 125C
Tc = 25C, ITM = 1.2 A,
Instantaneous measurement
Tj = 25C, VD = 6 V, RL = 6 ,
RG = 330 
Tj = 25C, VD = 6 V, RL = 6 ,
RG = 330 
Notes: 2. Measurement using the gate trigger characteristics measurement circuit.
3. Case temperature is measured at the T2 terminal 1.5 mm away from the molded case.
4. Test conditions of the critical-rate of rise of off-state commutating voltage is shown in the table below.
Test conditions
1. Junction temperature
Tj = 125C
2. Rate of decay of on-state commutating current
(di/dt)c = – 0.4 A/ms
3. Peak off-state voltage
VD = 400 V
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
Commutating voltage and current waveforms
(inductive load)
Supply
Voltage
Main
Current
Main
Voltage
(dv/dt)c
Time
(di/dt)c
Time
Time
VD
Page 2 of 7
BCR08AM-14A
Preliminary
Performance Curves
Rated Surge On-State Current
Maximum On-State Characteristics
10
Tc = 25°C
9
Surge On-State Current (A)
On-State Current (A)
101
7
5
3
2
100
7
5
3
2
8
7
6
5
4
3
2
1
1.5
2.0
2.5
3.0
3.5
Gate Voltage (V)
100
7
5
3
2
10–1
7
5
3
2 3
5 7 102
Gate Characteristics
Gate Trigger Current vs.
Junction Temperature
VGM = 6V
103
7
5
Typical Example
PGM = 1W
PG(AV) =
0.1W
VGT
IGM =
0.5A
IFGT I, IRGT I, IRGT III
VGD = 0.1V
3 5 7 101 2 3
5 7 102 23
5 7103
3
2
102
7
5
3
2
101
–60 –40 –20 0 20 40 60 80 100 120 140
Junction Temperature (°C)
Maximum Transient Thermal
Impedance Characteristics
(Junction to case, Junction to ambient)
Gate Trigger Voltage vs.
Junction Temperature
103
7
5
Typical Example
3
2
102
7
5
3
2
101
–60 –40 –20 0 20 40 60 80 100 120 140
Junction Temperature (°C)
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
102 2 3 5 7 103 2 3 5 7104 2 3 5 7105
3
Transient Thermal Impedance (°C/W)
100 (%)
5 7 101
Conduction Time (Cycles at 60Hz)
Gate Current (mA)
Gate Trigger Voltage (Tj = t°C)
Gate Trigger Voltage (Tj = 25°C)
2 3
On-State Voltage (V)
3
2
101
7
5
3
2
0
100
4.0
100 (%)
1.0
Gate Trigger Current (Tj = t°C)
Gate Trigger Current (Tj = 25°C)
10–1
2
Junction to ambient
102
7
5
Junction to case
3
2
101
7
5
3
10–1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102
Conduction Time (Cycles at 60Hz)
Page 3 of 7
BCR08AM-14A
Preliminary
Allowable Case Temperature vs.
RMS On-State Current
2.0
160
1.8
140
1.6
1.4
1.2
1.0
0.8
0.6
360°
Conduction
Resistive,
inductive loads
0.4
0.2
0
0
0.2
0.4
0.6
0.8
1.0
1.2
Case Temperature (°C)
On-State Power Dissipation (W)
Maximum On-State Power Dissipation
120
100
80
60
40
20
0
1.4
Curves apply regardless of
conduction angle
360°
Conduction
Resistive,
inductive loads
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
160
Curves apply regardless
of conduction angle
Natural Convection
No Fins
Ambient Temperature (°C)
140
120
100
80
360°
Conduction
Resistive,
inductive loads
60
40
20
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
RMS On-State Current (A)
Repetitive Peak Off-State Current (Tj = t°C)
Repetitive Peak Off-State Current (Tj = 25°C)
Allowable Ambient Temperature vs.
RMS On-State Current
RMS On-State Current (A)
100 (%)
RMS On-State Current (A)
Repetitive Peak Off-State Current vs.
Junction Temperature
105
7 Typical Example
5
3
2
104
7
5
3
2
103
7
5
3
2
102
–60 –40 –20 0 20 40 60 80 100 120 140
Junction Temperature
100 (%)
Holding Current vs.
Junction Temperature.
103
7
5
Laching Current (mA)
Holding Current (Tj = t°C)
Holding Current (Tj = 25°C)
Laching Current vs.
Junction Temperature
Typical Example
3
2
102
7
5
3
2
101
–60 –40 –20 0 20 40 60 80 100 120 140
Junction Temperature
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
(°C)
(°C)
102
7
5
3
2
Distribution
T2+, G–
Typical Example
101
7
5
3
2
100
7 + +
5 T2 , G
3 Typical
2 Example
10–1
–40
0
T2– , G–
Typical Example
40
80
120
Junction Temperature
160
(°C)
Page 4 of 7
BCR08AM-14A
Preliminary
100 (%)
160
Typical Example
140
Breakover Voltage (dv/dt = xV/μs)
Breakover Voltage (dv/dt = 1V/μs)
120
100
80
60
40
20
0
–60 –40 –20 0 20 40 60 80 100120 140
160
Typical Example
Tj = 125°C
140
120
100
80
I Quadrant
III Quadrant
60
40
20
0
100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103
Commutation Characteristics
Gate Trigger Current vs.
Gate Current Pulse Width
100 (%)
Rate Of Rise Of Off-State Voltage (V/μs)
101
7 Typical Example
5
Conditions
VD = 200V
IT = 1A
τ = 500μs
Tj = 125°C
3
2
Minimum
Characteristics
Value
3
2
2
5 7 100
3
I Quadrant
2
3
103
7
5
Typical Example
RGT III
III
IIRGT
3
III Quadrant
100
7
5
10–1
10–1
Breakover Voltage vs.
Rate Of Rise Of Off-State Voltage
Junction Temperature (°C)
Gate Trigger Current (tw)
Gate Trigger Current (DC)
Critical Rate Of Rise Of Off-State
Commutating Voltage (V/μs)
Breakover Voltage (Tj = t°C)
Breakover Voltage (Tj = 25°C)
100 (%)
Breakover Voltage vs.
Junction Temperature
2
102
7
5
Rate of Decay of On-State
Commutating Current (A/ms)
IRGT I
3
2
101 0
10
5 7 101
IFGT I
2 3
5 7 101
2 3
5 7 102
Gate Current Pulse Width (μs)
Gate Trigger Characteristics Test Circuits
6
6
A
6V
A
6V
RG
V
Test Procedure I
V
RG
Test Procedure II
6
A
6V
V
RG
Test Procedure III
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
Page 5 of 7
BCR08AM-14A
Preliminary
Package Dimensions
Package Name
TO-92*
JEITA Package Code
SC-43A
RENESAS Code
PRSS0003EA-A
Previous Code
T920
MASS[Typ.]
0.23g
Unit: mm
φ5.0Max
11.5Min
5.0Max
4.4
1.25 1.25
3.6
1.1
Circumscribed circle φ0.7
JEITA Package Code
RENESAS Code
Previous Code
MASS (Typ) [g]
SC-43A
PRSS0003DJ-A
TO-92
0.23
Unit: mm
14.47 ± 0.4
4.58 ± 0.2
+0.25
4.58 −0.15
+0.10
0.46 ± 0.1
0.38 −0.05
(3.86 MAX)
1.02 ± 0.1
1.27
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
Page 6 of 7
BCR08AM-14A
Preliminary
Ordering Information
Packing Note5
Plastic Bag
Plastic Bag
Adhesive Tape
Plastic Bag
Quantity
500 pcs.
500 pcs.
2000 pcs.
1000 pcs.
TO-92
Plastic Bag
1000 pcs.
BCR08AM-14A-TB#BD0
TO-92
Adhesive Tape
2000 pcs.
BCR08AM-14A#FD0
BCR08AM-14A-A6#FD0
BCR08AM-14A-TB#FD0
TO-92
TO-92
TO-92
Plastic Bag
Plastic Bag
Adhesive Tape
1000 pcs.
1000 pcs.
2000 pcs.
Orderable Part Number
BCR08AM-14A#B00
BCR08AM-14A-A6#B00
BCR08AM-14A-TB#B00
BCR08AM-14A#BD0
Package
TO-92*
TO-92*
TO-92*
TO-92
BCR08AM-14A-A6#BD0
Remark
Straight type
A6 Lead form
A8 Lead form
Straight type
Halogen-free
A6 Lead form
Halogen-free
A8 Lead form
Halogen-free
Straight type
A6 Lead form
A8 Lead form
Quality Grade Note7
General Industrial & Consumer Use
General Industrial & Consumer Use
General Industrial & Consumer Use
General Industrial & Consumer Use
General Industrial & Consumer Use
General Industrial & Consumer Use
Special Consumer Use Note6
Special Consumer Use Note6
Special Consumer Use Note6
Notes: 5. Please confirm the specification about the shipping in detail.
6. “Special Consumer Use” grade product is not tested for the “Temperature Humidity Bias” reliability in the
condition of rated VDRM. Please be sure to implement qualification tests and judge whether the product meets
your criteria. If necessary, please apply moisture-proof measures according to user’s conditions.
7. For further details about the classification in the Standard quality grade, please refer to the application note.
R07DS1226EJ0400 Rev.4.00
Aug 25, 2015
Page 7 of 7
Notice
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
3.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
5.
Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3
Tel: +1-905-237-2004
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2015 Renesas Electronics Corporation. All rights reserved.
Colophon 5.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement