Schneider Electric | Magelis XBT GK | Specifications | Schneider Electric Magelis XBT GK Specifications

Magelis
Human/Machine
Interfaces
®
Catalog
2010
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
A full range of catalogs for . . . . . .
Magelis®
Human/Machine
Interfaces
Catalog
2010
Detection
Automation
Automation
Operator dialog
Motion and Drives
&
&
&
&
&
Global Detection
Electronic and
electromechanical sensors
Modicon® Quantum™
automation platform
Catalog 2009
Modicon® Momentum™
distributed I/O and control
Control and signalling
components
MKTED208052EN
MKTED205061EN
MKTED208031EN
Lexium® 32 Servo Drives
motion control
Catalog 2009/2010
MKTED208011EN-US
Photo-electric sensors
Proximity sensors
Capacitive proximity sensors
Ultrasonic sensors
Limit switches
Pressure switches
Rotary encoders
Radio frequency identification
Machine cabling accessories
Safety PLCs
Safety CPUs
Unity™ Concept™ and
ProWORX™ software
&
Modicon® Premium™
automation platform
Catalog 2010
MKTED208054EN-US
Unity processors
PL7 processors
Communication software
&
Modicon® M340™
automation platform
Catalog 2010
DIA6ED2081007EN-US
PLCs
Discrete, analog I/O and
application-specific solutions
Communication
DIA3ED2090202EN
Control and signalling units
Control stations & enclosures
Cam switches
Beacons and indicator banks
Pendant control stations
Controllers
Emergency stops
Foot switches
Controller base
Discrete, analog I/O
Communication
&
&
Twido® programmable
controller and TwidoSuite™
software
&
Automation functions,
relays, interfaces and
power supplies
MKTED207031EN
Smart relays
Timing relays
Measurement & control relays
Analog interfaces
Counters
Plug-in relays
Interfaces for discrete signals
Power supplies & transformers
Magelis®
Human/Machine Interfaces
Catalog 2010
MKTED206071EN-US
Operator interface terminals
Industrial PCs
HMI and SCADA PC-based
software
Software
Vijeo Designer
Operator terminal software
DIA7ED2090405EN-US
Motion controllers
Servo drives and Servo motors
Stepper motors and drives
Integrated drives
Modicon Premium
motion control modules
&
Soft starters and variable
speed drives
MKTED206111EN
Soft starters and variable speed
drives
Software
Software for drives
Motor control programming
software
Software
PLCs and safety controllers
programming software
Not all products shown in this catalog are available in every country. Check individual country’s web site or Sales Office for product availability.
See our web site: www.schneider-electric.us/
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
. . . . . . Automation & Control functions
Motor control
&
Motor starter solutions
Control and protection
components
MKTED205103EN
Contactors
Circuit-breakers, fuse carriers
Thermal relays
Combinations, motor controllers
Mounting solutions
Motor starter mounting kits
Machine safety
This catalog contains
Automation and Control function
products relating to machines
Safety
&
Preventa™
Machine Safety Products
Catalog 2009
MKTED208051EN-US
Safety PLCs
Safety controllers
Safety monitors
Safety solutions on AS-Interface
cabling system
Safety switches
Safety light curtains
Safety mats
Emergency stops
Control stations
Enabling switches
Foot switches
Beacons & indicator banks
Switch disconnectors
Thermal-magnetic motor circuit
breakers
Enclosed D.O.L. starters
Interfaces and I/O
Power supplies
&
&
Terminal blocks
Phaseo® power supplies
and transformers
MKTED207011EN
Terminal blocks
Cable ends
&
Advantys™ STB
IP 20 distributed
inputs/outputs
Catalog 2010
MKTED208053EN-US
Modules for automation station
Network interfaces
Power distribution
Digital I/O, analogs and
application-specific
Software
STB configuration software
DIA3ED2061209EN
Switch mode power supplies
Filtered rectified power supplies
Transformers
Systems & architectures
This catalog contains
Automation and Control function
products relating to
Communication
&
Machine & Installations with
industrial communication
MKTED207012EN
Preferred implementations
Ethernet TCP/IP, the universal
communication standard
CANopen for machines and
installations
AS-interface, simple and safe
Products
Human-Machine interface
Controllers and PLCs
Field devices
Infrastructure and wiring
Gateways
Software and tools
Collaborative Automation
Partner Program & Partners
Software
XPSMFWIN configuration
software
XPSMCWIN configuration
software
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
0
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
General contents
Magelis® Human/Machine
Interfaces
1 – Operator dialog terminals
Magelis® Small Panels
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2
Magelis STO/STU Small Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/12
Magelis XBT N Small Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/13
Magelis XBT R Small Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/15
Magelis XBT RT Small Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/19
Magelis® Advanced Panels
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/24
Magelis XBT GT Advanced Panels 3.8”, 5.7”, 7.5”, 10.4”, 12.1”, 15”. . . . . . . 1/50
Magelis XBT GK Advanced Panels 5.7”, 10.4”. . . . . . . . . . . . . . . . . . . . . . . 1/51
Magelis XBT GH Advanced Panels 5.7”. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/51
Magelis XBT GTW Advanced Panels 8.4”, 12”, 15”. . . . . . . . . . . . . . . . . . . . 1/52
2 – Industrial PCs
Magelis® Smart Embedded Panels and Magelis® Compact iPC PC Panels
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/2
Magelis Smart Embedded Panels 8.4”, 12”, 15”. . . . . . . . . . . . . . . . . . . . . . . 2/4
Magelis Compact iPC PC Panels 8.4”, 12”, 15” . . . . . . . . . . . . . . . . . . . . . . 2/12
Magelis® Smart BOX, Magelis® Compact PC BOX,
Magelis® Flex PC BOX and Front Panels
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/24
Magelis Smart BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/39
Magelis Compact PC BOX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/40
Magelis Flex PC BOX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/41
Front Panels for Magelis Flex PC BOX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/43
Separate parts for Magelis Flex PC BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/44
Magelis® iDisplay flat screens
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/52
Magelis iDisplay flat screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/54
Magelis® HMI Controller
Magelis XBT GC Compact HMI Controller . . . . . . . . . . . . . . . . . . . . . . . . . . 2/55
3 – Magelis® HMI software
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/2
Configuration software
Vijeo Designer™ Lite configuration software. . . . . . . . . . . . . . . . . . . . . . . . . . 3/7
Vijeo Designer configuration software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/17
4 – Services
Technical appendices
Certifications for automation products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/2
Index
Product reference index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/5
1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
Advantys™, Altistart®, Altivar®, Citect®, Concept™, ConneXium™, ELAU®, FactoryCast™, Fipio®, Fipway®, Lexium®, Magelis®, M340™, Modbus®, Modbus Plus™, Modicon®,
Modsoft™, Momentum™, Nano™, Ositrack™, PacDrive®, Phaseo®, PL7™, PowerSuite™, Premium™, Preventa™, ProWORX 32™, Quantum™, Schneider Electric® and logo,
Telefast®, TeSys®, Transparent Ready®, TSX Micro™, Twido®, TwidoSoft™, TwidoSuite™, Uni-TE™, Uni-Telway™, Unity™, Unity™ Pro, Vijeo®, Vijeo® Designer™, Vijeo Look™
and X-Way™ are trademarks or registered trademarks of Schneider Electric. Other trademarks used herein are the property of their respective owners.
1/0
2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contents chapter 1
Operator dialog terminals
1.1 - Magelis® Small Panels
Selection guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2
b Architectures, connection to automation systems. . . . . . . . . . . . . . . . . . . . . . . 1/4
1
b Magelis STO/STU Small Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/12
b Magelis XBT N Small Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/13
b Magelis XBT R Small Panels
v. with 4-line matrix screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/15
2
b Equivalent product tables for Magelis XBT P to XBT R . . . . . . . . . . . . . . . . . . 1/17
b Magelis XBT RT Small Panels
v. with 10-line matrix screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/19
b Separate parts for Magelis XBT N/R/RT Small Panels . . . . . . . . . . . . . . . . . . 1/21
3
1.2 - Magelis® Advanced Panels
Selection guide������������������������������������������������������������������������������������������������� 1/24
b Magelis XBT GT Advanced Panels
v. 3.8”, 5.7”, 7.5”, 10.4”, 12.1”, 15” screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/50
4
b Magelis XBT GK Advanced Panels
v. 5.7”, 10.4” screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/51
b Magelis XBT GH Advanced Panels
v. 5.7” screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/51
b Magelis XBT GTW Advanced Panels
v. 8.4”, 12”, 15” screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/52
b Separate parts for
Magelis XBT GT/GK/GH/GTW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/53
b Wiring system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/60
b Equivalent product tables for
Magelis XBT F, XBT FC to XBT GT and XBT F to XBT GK. . . . . . . . . . . . . . . . 1/64
b Equivalent product tables for
Magelis XBT G to XBT GT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/65
b Dimensions, mounting
v. Magelis XBT N/R/RT Small Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/68
v. Magelis XBT GT Advanced Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/68
v. Magelis XBT GK/GH/GTW Advanced Panels. . . . . . . . . . . . . . . . . . . . . . . 1/69
1/1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection guide
1
Operator dialog terminals
Magelis® XBT N, XBT R and XBT RT
Small Panels
Applications
Display of text messages
Type of terminal
Small Panels with keypad
1
2
3
Display
4
Type
Green back-lit LCD,
height 5.5 mm
or
Green, orange or red back-lit LCD,
height 4.34 to 17.36 mm
Capacity
2 lines of 20 characters or
1 to 4 lines of 5 to 20 characters
Data entry
Via keypad with
8 keys (4 customizable)
Memory capacity
Application
Expansion by PCMCIA type II
512 KB Flash
–
Functions
Maximum number of pages
128/200 application pages
256 alarm pages
40 to 50
Alphanumeric
–
–
Depending on model
Access to the PLC real-time clock
–
–
Variables per page
Representation of variables
Recipes
Curves
Alarm logs
Real-time clock
Alarm relay
Buzzer
Communication
Asynchronous serial link
Downloadable protocols
Printer link
RS 232C/RS 485
Uni-TE™, Modbus®, and for PLC brands:
Allen-Bradley, Omron, Mitsubishi, Siemens
RS 232C serial link (2)
Development software
Operating system
Vijeo Designer™ Lite (page 3/7) (on Windows® 2000, Windows XP® and Windows Vista®)
Magelis®
Terminal type
XBT N
Pages
1/2
1/13
(1)Only XBT RT511.
(2)Depending on model.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
1
Display of text messages
Control and parametering of data
Display of text messages and/or semi-graphics
Control and parametering of data
Small Panels with keypad
Small Panels with touch screen and keypad
1
2
Green, orange or red back-lit LCD,
height 4.34 to 17.36 mm
Green, orange or red back-lit LCD (198 x 80 pixels),
height 4 to 16 mm
1 to 4 lines of 5 to 20 characters
2 to 10 lines of 5 to 33 characters
Via keypad with
12 function keys or numeric entry (depending on context)
+ 8 service keys
Via keypad with
4 function keys
8 service keys
512 KB Flash
–
512 KB Flash EPROM
–
128/200 application pages
256 alarm pages
40 to 50
Alphanumeric
–
–
Yes
Access to the PLC real-time clock
–
–
200 application pages
256 alarm pages
50
Alphanumeric, bargraph, buttons, lights
–
Yes
Yes
3
4
Via touch screen and keypad with
10 function keys
2 service keys
Yes (1)
RS 232C/RS 485
Uni-TE™, Modbus®, and for PLC brands:
Allen-Bradley, Omron, Mitsubishi, Siemens
RS 232C serial link (2)
Vijeo Designer™ Lite (page 3/7) (on Windows XP® and Windows Vista®)
Magelis®
XBT R
XBT RT
1/15
1/19
1/3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Architectures
1
Architectures, connection to automation
systems
Architectures,
connection to automation systems
Magelis® operator dialog terminals communicate with automation system
equipment:
b Via serial link.
b Via fieldbus.
b In network architectures.
b By integration into an architecture with Ethernet TCP/IP network.
Point-to-point or multidrop connection with PLC via serial link
2
Modicon ® M340 PLC
Twido ® PLC
XBT RT terminal
XBT N terminal
3
Quantum™ PLC
Modicon M340 PLC
Modbus ® protocol network
4
All terminals incorporate an RS 232C, RS 422/485
asynchronous serial link as standard.
The use of Uni-TE™ and Modbus® protocols means that
communication can be set up easily with Schneider
Electric Modicon PLCs. Modicon.
Third party protocols provide connection to PLCs offered
by the main suppliers on the market:
b DF1, DH485 for Allen-Bradley PLCs.
b Sysmac® Way for Omron PLCs.
b MPI/PPI for Siemens Simatic S7 PLCs.
b Mitsubishi Melsec® FX PLC.
Modbus
XBT GT terminal
XBT GK terminal
XBT GT terminal
1/4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Architectures (continued)
1
Operator dialog terminals
Architectures, connection to automation
systems
Network
manager
Integration in an architecture with Ethernet TCP/IP network
@
XBT GTW
XBT GT
Quantum™
Automation platforms provide transparent routing of
Uni-TE™ or Modbus® messages from a TCP/IP network to
a Uni-TE or Modbus network and vice versa.
Web Gate
XBT GK
+ Web server
Premium™ + Web server
The various services offered for the terminals are:
b Modbus TCP/IP messaging (for XBT GT, XBT GK,
XBT GH and XBT GTW, access with Ethernet TCP/IP
Modbus protocol).
b Browse function with XBT GTW or standard PC.
b Web Gate function:
Diagnostics for remote control of the application.
b FTP server:
Transfer of data files with the terminal.
Data Sharing function:
Data exchanges on Ethernet between 8 terminals
(maximum).
2
3
Altivar® 71
Ethernet TCP/IP
4
XBT GH
Advantys™ STB
XBT GK
®
™
Premium
1
Twido®
XBT GT
TSX Micro™
1/5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction
Operator dialog terminals
Magelis® XBT N, XBT R and XBT RT
Small Panels
Introduction
Magelis® XBT N and Magelis® XBT R/RT terminals are
used to display messages and variables.
In addition, Magelis XBT RT terminals can display
small graphic elements.
1
The various keys can be used to:
b Modify variables
b Control a device
b Navigate within the operator dialog application
2
XBT R411
XBT N400
Alarm messages can be printed out from models that
have a printer port.
3
4
XBT RT511
On XBT RT terminals, the touch screen can also be
used to modify variables, control devices and navigate
within the dialog application.
Operation
All Magelis terminals have the same user interface:
b A configurable touch screen, on XBT RT only
(“touch-sensitive” mode)
b 2 service keys ( , ) configurable for contextual link
or control, on XBT N/R and XBT RT (“entry”/“control”
modes)
b 2 non-configurable service keys (ESC, ENTER)
“Entry” customization
“Control” customization
1/6
b In addition to these keys:
v On XBT N terminals: 4 customizable service keys
which can be configured as function keys (“control”
mode) or service keys (“entry” mode)
v On XBT R terminals: 4 non-configurable service
keys and 12 function or numeric entry keys
(depending on context)
v On XBT RT terminals in “control” or “entry” mode: 4
customizable, configurable function keys. 4 nonconfigurable service keys.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction (continued)
Configuration
Operator dialog terminals
Magelis® XBT N, XBT R and XBT RT
Small Panels
Magelis® terminals can be configured using Vijeo
Designer™ Lite software, in a Windows environment.
The Vijeo Designer Lite software uses the concept of
pages: each page can be viewed in its entirety.
A 2, 4, or 10-line window, depending on the terminal
model to be configured, is used to view the screen of
this virtual terminal.
The symbol databases of TwidoSoft™, PL7™ and
Concept™ applications can be imported into the Vijeo
Designer Lite operator dialog application.
1
2
3
Vijeo Designer™ Lite
Communication
XBT N and XBT R/RT terminals communicate with
PLCs via an integrated serial link in either point-topoint or multidrop mode, depending on the model.
XBT N terminal
4
The communication protocols used are those of
Schneider Electric PLCs (Uni-TE™, Modbus®)
and those of the main manufacturers on the market.
Twido® controller
1/7
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Functions
Operator dialog terminals
Magelis® XBT N, XBT R and XBT RT
Small Panels
Functions
XBT N/R/RT terminals have function and service keys on the front panel (according
to “control” or “entry” configuration).
XBT RT terminals have a touch screen which can be configured in “touch-sensitive”
operating mode.
1
“F” function keys
The function keys are defined for the whole application.
The number of function keys depends on the model:
b F1, F2, F3, F4 on XBT N
b F1 to F12 on XBT R
b F1 to F10 or F1...F4 according to configuration on XBT RT
They can provide the following functions:
b Access to a page
b Pulsed control
b Toggle command
2
3
In addition, with the XBT R terminal, if the MOD key is pressed, the 12 function keys
become numeric entry keys 1 to 0, +/- and ..
“R” function keys for XBT RT (“entry” mode)
The R1, R2, R3 and R4 function keys on the XBT RT are defined for the pages
displayed. They can be used to:
b Access a page
b Latch memory bits
b Toggle memory bits (ON/OFF)
b Set memory bits to one/zero
An icon can be displayed on the screen, above the Ri keys. This icon is defined
using the Vijeo Designer™ Lite software.
4
Matrix touch screen (5 x 11 cells) for XBT RT
The touch screen can be configured to be active on XBT RT (“touch-sensitive”
mode).
This is used to:
b Access a page
b Latch/toggle memory bits
b Modify a numeric field via a virtual numeric keypad
Service keys
,
, MOD, ENTER, , are used to modify the
b Service keys , ESC, DEL,
parameters of the automation system.
They perform the following actions:
ESC
Cancel an entry, suspend or stop a current action, go up one level in a menu
DEL
MOD
Delete the character selected in entry mode
Select the variable field to enter. Authorize the entry of the next field, on
each press, from left to right and top to bottom.
ENTER Confirm a selection or an entry, acknowledge an alarm
b The “arrow” keys are used to:
v Change page in a menu
v Display current alarms
v Change digit in a variable field during input
v Activate the function associated with a functional link
v Move up and down within a page (XBT N40p)
v Select the value of a digit
v Select a value in a selection list
v Increment or decrement the value of a variable field
1/8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT N, XBT R and XBT RT
Small Panels
Description of XBT N terminals
XBT N terminals include:
2
3
On the front panel
1 A communication monitoring lamp (model XBT N401)
2 A backlit ultra bright LCD display: 122 x 32 pixels (matrix) or 2 lines of 20
characters (alphanumeric)
3 2 non-customizable control or contextual link keys
4 An “alarm” lamp (model XBT N401)
5 Six service keys, 4 of which (shown in frame) can be configured as function keys
and customized with labels
6 2 system lamps in entry mode or 4 lamps that can be controlled by PLC in control
mode (model XBT N401)
1
2
XBT N200
5
Supplied separately
1
2
3
7
8
9
3
4
XBT N401
5
b A sheet of labels including:
7 An “entry” label
8 A “control” label, F1, F2, F3 and F4
9 4 blank customizable labels
b 2 spring clips for mounting the terminal on a panel
4
6
On the rear panel
XBT N200/N400 terminals
1 An RJ 45 connector for point-to-point serial link and connection of the 5 V c
power supply (provided by the PLC)
XBT N401/N410/NU400 terminals
1
XBT N200
2 A removable screw terminal block for the 24 V c external power supply
3 A 25-way female SUB-D connector for multidrop serial link
4 An 8-way female mini-DIN connector for serial printer link
(model XBT N401)
2
XBT N401
3
4
1/9
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description (continued)
Magelis® XBT N, XBT R and XBT RT
Small Panels
Description of XBT R terminals with keypad
XBT R terminals include:
2
1
3
2
5
7
3
On the front panel:
1 A communication monitoring lamp (model XBT R411)
2 A backlit ultra bright LCD display: 122 x 32 pixels (matrix)
3 Two non-customizable control or contextual link keys
4 An “alarm” lamp (model XBT R411)
5 Six service keys
6 2 system lamps (model XBT R411)
7 12 function or numeric entry keys (depending on context) that can be customized
with labels
8 12 lamps (for model XBT R411), that can be controlled by the PLC
Supplied separately:
XBT R400
1
2
6
9
10
4
3
4
5
7
b A sheet of labels comprising:
9 A “control” label, F1, F2, ...F12
102 blank customizable labels
b 4 spring clips for mounting the terminal on a panel
XBT R411
8
On the rear panel
XBT R400 terminals
1 An RJ 45 connector for point-to-point serial link and connection of the 5 V c
power supply (provided by the PLC)
XBT R410/R411 terminals
1
2 A removable screw terminal block for the 24 V c external power supply
3 A 25-way female SUB-D connector for multidrop serial link
4 An 8-way female mini-DIN connector for serial printer link (model XBT R411)
XBT R400
2
XBT R411
1/10
3
4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description (continued)
Magelis® XBT N, XBT R and XBT RT
Small Panels
2
Description of XBT RT terminals with touch screen and keypad
XBT RT terminals include:
1
1
On the front panel:
XBT RT terminals
1
2
3
4
2
3
A backlit ultra bright LCD display: 198 x 80 pixels (matrix)
2 service keys
Configurable function or service keys that can be customized using labels
Matrix touch screen, 11 x 5 cells
2
XBT RT511 terminal
5
6
7
8
4
A communication monitoring lamp
A “touch panel or keys being pressed” lamp
An “alarm” lamp
6 or 10 lamps, depending on the configuration, that can be controlled by the PLC
Supplied separately:
3
9
4
10
XBT RT 500
11
5
6
12
13
7
8
XBT RT511
b 2 sheets of labels comprising:
9 A configurable “control” label, F1 to F4
10A blank customizable “control” label
11An “entry” label, R1 to R4
12A “touch sensitive” label, F1 to F10
132 blank customizable “touch-sensitive” labels
On the rear panel
XBT RT500 terminal
1 An RJ 45 connector for point-to-point serial link and connection of the 5 V c
power supply (provided by the PLC).
XBT RT511 terminal
1
2 A removable screw terminal block for the 24 V c external power supply
3 An RJ45 connector for multidrop serial link
4 An 8-way female mini-DIN connector for serial printer link
XBT RT500
4
3
2
XBT RT511
1/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
1
With graphic screen
Type
Display
2
Magelis® STO/STU Small Panels
Functions
Communication
Specifications
LCD screen size / Resolution
3.4” / monochrome (200 X 80 pixels)
3.5” / QVGA (320 X 240 pixels)
Type
Green, orange, red
TFT 65 536 colors
White, pink, red
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves / Alarm logs
Yes, with log / Yes, incorporated
Serial link
1 RJ45 (RS 232 - RS 485)
Networks
–
–
Ethernet, IEEE 802.3
10/100 BASE-T, RJ45
3
Downloadable protocols
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley), Siemens (Simatic®)
Uni-TE™, Modbus®, Modbus TCP
Development software
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7) or Vijeo
Designer Limited Edition
Dimensions W x D x H
113×28×78mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon® Premium™, Modicon® Quantum™, Modicon® M340™
Compact Flash card slot
No
USB port
1 Host type A + 1 Device type miniB
Front: 98×16×81mm
Rear: 118×30×98mm
4
Built-in Ethernet TCP/IP
No
Supply voltage
24 VDC
References
HMI STO511
1/12
No
Yes
HMI STO512
HMI STU655
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT N Small Panels
1
With matrix, semi-graphic screen
Type
Display
Specifications
Capacity
Type
2 lines, 20 characters
Back-lit LCD
1 to 4 lines, 5 to 20 characters
Back-lit LCD
green
2
3 colors
green, orange, red
Data entry
Function
Communication
Via keypad with 8 keys (4 customizable keys)
Representation of variables
Alphanumeric
Alphanumeric, bargraph, curves, button and light
Alarm log
No
Yes
Serial link
1 RJ45 (RS 232 - RS 485)
1 Sub-D25 (RS 232 - RS 485) + 1 miniDin RS232 (2)
Uni-TE™, Modbus Master
Uni-TE, Modbus Master, Siemens, Rockwell,
Downloadable protocols
Yes
Yes
Omron, Mitsubishi, Zelio® (2)
Development software
Vijeo Designer™ Lite (on Windows XP® and Windows Vista®)
Dimensions W x D x H
132 x 37 x 74 mm
Compatibility with PLCs
Twido®, Modicon TSX Micro™,
Twido, Modicon TSX Micro,
Modicon Premium™, Modicon M340™
Modicon Premium, Modicon Quantum, Modicon
Momentum™, Modicon M340, Zelio® (2)
Supply voltages
5 VDC or PLC power supply
24 VDC
References
XBTN200
XBTN410
XBTN400
3
4
XBTN401
(1) Except XBTN200: alphanumeric screen.
(2) For XBTN401 only
With matrix, semi-graphic screen, dedicated
Type
Display
Specifications
Capacity
1 to 4 lines, 5 to 20 characters
Type
Back-lit LCD
Back-lit LCD
green
3 colors (green, orange, red)
Data entry
Function
Communication
Via keypad with 8 keys
Representation of variables
Alphanumeric, bargraph, curves, button and light
Alarm log
Yes
Serial link
1 Sub-D25
1 miniDin RS232 + 1 Sub-D25
Downloadable protocols
Modbus®
Zelio®
Development software
Vijeo Designer™ Lite (on Windows XP® and Windows Vista®)
Dimensions W x D x H
132 x 37 x 74 mm
Compatibility with PLCs
Motor starter
Zelio
Tesys® Model U
(including connection cable)
Supply voltages
24 VDC
References
XBTNU400
XBTNSR2 (3)
(3) Including: 1 XBTN401 + 1 cable SR2CBL08 for Zelio
Introduction:
pages 1/6 to 1/7
Dimensions:
page 1/68
1/13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References
Magelis® XBT N Small Panels
Magelis® Small Panels
Downloadable exchange Compatible PLCs
protocol
1
Supply voltage
Type of screen
Reference
Weight
kg
Green backlit
LCD
XBTN200
0.360
Green backlit
LCD (122 x 32
pixels)
XBTN400
0.360
Terminal with 2 lines of 20 characters (with alphanumeric screen)
Uni-TE™, Modbus®
Twido®, Nano™, TSX Micro™, 5 c via PLC
Premium™, Modicon® M340™ terminal port
Terminals with 4 lines of 20 characters (with matrix screen)
XBT N200
Uni-TE, Modbus
2
5 V c via PLC
terminal port
Twido (1), Nano, TSX Micro, 24 V c external
Premium, TSX series 7,
supply
Momentum™, Quantum™
Other Modbus slave devices,
Modicon M340
XBT N400/N410/NU400
3
Twido, Nano, TSX Micro™,
Premium, Modicon M340
Modbus
TeSys® model U motor
starters (3)
Altivar® drives
24 V c external
supply
Green backlit
XBTN410
LCD (122 x 32
pixels)
Green, orange
XBTN401
and red backlit
LCD (2) (122 x 32
pixels)
Green backlit
XBTNU400
LCD (122 x 32
pixels)
0.380
0.380
0.380
XBT N401
Software
4
Description
Configuration software
Operating system
Windows 2000®, Windows XP®, and Windows Vista®
Reference
See pages
3/7 and 3/17
Details
Reference
–
Accessories (4)
521377
Description
MOD
ESC
DEL
XBT ZN01
Flush mounting accessory Kit for applications requiring a higher degree of All XBT N
dust and damp protection or customization of the
panel, using a flat metal strip (not included)
XBTZN01
Weight
kg
–
Protective sheets
All XBT N
XBTZN02
–
XBT N200/400
XBT N401 XBT
NU400
–
XBLYN00
XBLYN01
–
–
XBTZNCO
–
10 peel-off sheets
521373
Sheets of re-usable labels 10 sheets of 6 labels
Mechanical adaptors for
substitution of XBT H
MOD
ESC
For use with
From XBT H0p2p1/H0p1010 to XBT N410
From XBT H811050 to XBT N410
R
ENTE
DEL
XBT ZN02
Connection cables and accessories (5)
Description
Adaptor cable
Zelio controller cable
Compatibility Types of
connector
XBT N200 XBT RJ45-RJ45
N400 (6)
Physical
link
RS 232C
RS 485
Protocol
Length Reference
Modbus®,
Uni-TE™
0.1 m
XBTZN999
Weight
kg
–
XBTN401
XBTR411
XBTRT511
–
Zelio® Logic
2.5m
SR2CBL08
–
Zelio® SR2/
SR3
(1)Connection via integrated port or optional serial port on the Twido programmable controller.
(2)Also has 4 indicator LEDs.
(3)Factory preloaded application for monitoring, diagnostics and adjustment of 1 to 8 TeSys
model U motor starters.
(4)Other accessories (see page 1/20).
(5)Other connection cables and accessories (see pages 1/20 to 1/23).
(6)Adaptor cable included with new version XBT N200/N400 terminals. The XBT ZN999 adaptor
is for use with new version XBT N200/N400 terminals and the XBT Z978 cable (replaced by
XBT Z9780), or with the old version XBT N200/N400 terminals and the new XBT Z9780
cable.
Note: The new version XBT N terminal can be distinguished externally from the old version as it has
the Schneider Electric logo on the front panel (on the left above the screen).
Introduction:
pages 1/6 to 1/7
1/14
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT R Small Panels
1
With matrix, semi-graphic screen
Type
Display
Specifications
Capacity
4 lines, 20 characters
Type
Back-lit LCD
Back-lit LCD, 3 colors
green
green, orange, red
Data entry
2
Via keypad with 20 keys (12 customizable keys)
Function
Representation of variables
Alarm log
Yes
Yes
Communication
Serial link
1 RJ45 (RS 232 - RS 485)
1 Sub-D25 (RS 232 - RS 485) + 1 miniDin (RS232)
Downloadable protocols
Alphanumeric, bargraph, curves, button and light
Uni-TE™, Modbus® Master
Yes
3
Uni-TE,Modbus Master/Slave (1), Siemens, Rockwell,
Omron, Mitsubishi, Zelio (1)
Development software
Vijeo Designer™ Lite (on Windows XP® and Windows Vista®)
Dimensions W x D x H
137 x 37 x 118 mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™,
Twido, Modicon TSX Micro, Modicon Premium, Modicon®
Modicon Premium™, Modicon M340™ Quantum™, Modicon® Momentum™, Modicon M340, Zelio (1)
Supply voltages
5 VDC or PLC power supply
24 VDC
References
XBTR400
XBTR410
XBTR411
4
(1) For XBTR411 only
Introduction:
pages 1/6 to 1/7
Dimensions:
page 1/68
1/15
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References
Magelis® XBT R Small Panels
Magelis® Small Panels
Downloadable exchange Compatible PLCs
protocol
1
Type of screen
Reference
Weight
kg
Twido®, Nano, TSX Micro™, 5 V c via PLC
Premium™, Modicon® M340™ terminal port
Green backlit
LCD (122 x 32
pixels)
XBTR400
0.550
Twido (1), Nano, TSX Micro, 24 V c external
Premium, TSX series 7,
supply
Momentum™, Quantum™
Other Modbus slave devices,
Modicon M340
Green backlit
XBTR410
LCD (122 x 32
pixels)
Green, orange
XBTR411
and red backlit
LCD (2) (122 x 32
pixels)
0.550
Terminals with 4 lines of 20 characters (with matrix screen)
Uni-TE™, Modbus®
XBT R400/R410
2
0.550
Software
3
Description
Configuration software
XBT R411
Operating system
Windows 2000® and Windows XP®
Reference
See pages
3/7 and 3/17
–
Accessories (3)
Description
DA573255
4
Supply voltage
ESC
F1
DEL
1
F2
7
F3
8
F4
9
R
ENTE
MOD
5
+/-
0
6
F6
F5
F11
F10
F9
F8
F7
4
3
2
F12
.
Details
Flush mounting accessory Kit for applications requiring a higher degree of All XBT R
dust and damp protection or customization of the
panel, using a flat metal strip (not included)
XBTZR01
Weight
kg
–
Protective sheets
XBTZR02
–
XBT R400/R410 XBLYR00
–
XBT R411
XBLYR01
–
–
XBTZRCO
–
10 peel-off sheets
For use with
All XBT R
Reference
XBT ZR01
DA573256
Sheets of re-usable labels 10 sheets of 6 labels
ESC
F1
DEL
1
7
F7
F2
F8
2
8
3
F3
F9
9
4
F4
MOD
5
0
F10
F5
F11
R
ENTE
+/-
6
F6
F12
.
Mechanical adaptor for
substitution of XBT P
From XBT P01p010/P02p010 to XBT R410
From XBT P02p110 to XBT R411
XBT ZR02
(1)Connection via integrated port or optional serial port on the Twido PLC.
(2)Also has 16 indicator LEDs.
(3)Other accessories (see pages 1/20 to 1/23).
Introduction:
pages 1/6 to 1/7
1/16
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Substitution
Magelis® Smart Panels
Equivalent product tables for XBT P to XBT R
Equivalent product tables - XBT P terminals to XBT R terminals
Old range XBT P
XBT R range
Mechanical adaptor (1)
XBTP011010
XBTR410
XBTZRCO
XBTP012010
XBTR410
XBTZRCO
XBTP021010
XBTR410
XBTZRCO
XBTP021110
XBTR411
XBTZRCO
XBTP022010
XBTR410
XBTZRCO
XBTP022110
XBTR411
XBTZRCO
(1)Mechanical adaptor for mounting XBT R terminal in place of the substituted XBT P terminal.
XBT R410
XBT R411
1
2
XBT ZRCO
Equivalent product table - cables for connection to Schneider Electric PLCs
3
Summary
Old range XBT P
Type of link
Serial port, 25-way SUB-D
RS 232C/RS 485/RS 422
XBT R range
Type of link
Serial port, 25-way SUB-D
RS 232C/RS 485
Cable
Existing cable, see below
Printer port, 9-way SUB-D
(model XBT P02p110)
Printer port, 8-way mini-DIN
(model XBT R411)
XBTZ926
(new cable)
4
Equivalent product table - cables
Old range XBT P
Type of terminal
XBT R range
Type of
Type of link
Length
terminal
Twido®, Modicon® TSX Micro™, Modicon® Premium™, 8-way mini-DIN terminal port, Uni-TE™ (V1/V2), Modbus® protocol
XBT P
RS 485 serial port,
2.5 m
XBTZ968
XBT R
RS 485 serial port, 2.5 m
25‑way SUB-D
25-way SUB-D
5m
XBTZ9681
5m
2.5 m
XBTZ9680
2.5 m
angled
angled
Modicon Premium with TSX SCY 2160p, 25-way female SUB-D connector, Uni-TE (V1/V2) protocol
XBT P
RS 485 serial port,
2.5 m
XBTZ918
XBT R
RS 485 serial port, 2.5 m
25-way SUB-D
25-way SUB-D
Modicon® Quantum™, 9-way male SUB-D connector, Modbus protocol
XBT P
RS 232C serial port,
2.5 m
XBTZ9710
XBT R
RS 232C serial port, 2.5 m
25-way SUB-D
25-way SUB-D
Advantys™ STB, HE13 connector (network interface module, NIM), Modbus protocol
XBT P
RS 232C serial port,
2.5 m
XBTZ988
XBT R
RS 232C serial port, 2.5 m
25-way SUB-D
25-way SUB-D
Modicon Momentum™ M1, RJ45 connector (port 1), Modbus protocol
XBT P
RS 232C serial port,
2.5 m
XBTZ9711
XBT R
RS 232C serial port, 2.5 m
25-way SUB-D
25-way SUB-D
TeSys® U starters, Altivar® 31/61/71 drives, Altistart® 48 starters, RJ45 connector, Modbus protocol
XBT P
RS 485 serial port,
2.5 m
XBTZ938
XBT R
RS 485 serial port, 2.5 m
25‑way SUB-D
25-way SUB-D
LT6 P multifunction protection relay, 9-way female SUB-D connector, Modbus protocol
XBT P
RS 232C serial port,
2.5 m
XBTZ938
XBT R
RS 232C serial port, 2.5 m
25-way SUB-D
25-way SUB-D
Type of link
Length Reference
Reference
XBTZ968
XBTZ9681
XBTZ9680
XBTZ918
XBTZ9710
XBTZ988
XBTZ9711
XBTZ938
XBTZ938
Equivalent product table - cables for application transfer to PC and printer cable
Old range XBT P
Type of terminal
Type of link
Cables for application transfer to PC
XBT P
25-way SUB-D/
9-way SUB-D
25-way SUB-D/USB
Serial printer cable
XBT P
Printer port,
9-way SUB-D
Length Reference
2.5 m
XBTZ915
2.5 m
XBTZ915 +
SR2CBL06 adaptor
2.5 m
XBTZ936
XBT R range
Type of
Type of link
terminal
Length
Reference
XBT R
25-way SUB-D/
9-way SUB-D
25-way SUB-D/
USB
2.5 m
XBTZ915
2.5 m
XBTZ915 + SR2CBL06 adaptor
Printer port,
8-way mini-DIN
2.5 m
XBTZ926
XBT R
1/17
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Substitution (continued)
Magelis® Smart Panels
Equivalent product tables for XBT P to XBT R
Compatibility table - Downloadable third party protocols
PLC brand
1
2
Allen-Bradley
GE Fanuc
Omron
Siemens
Compatibility
XBT P
b
b
b
b
b
Protocol name
XBT R
b
DF1/DH485
SNPX
Sysmac® Way
PPI
AS511, 3964R, MPI
–
b (on RS 232)
b
–
Equivalent product table - Cables for connection to third party PLCs
Omron CQM1 & CVM1, Sysmac® PLCs
3
Old range XBT P
Type of
Type of
terminal
connectors
Sysmac® Way protocol
XBT P
25-way SUB-D/
9-way SUB-D
Serial
port
Length Reference
RS 232
2.5 m
XBTZ9740
XBT R range
Type of terminal
Type of
connectors
Serial
port
25-way SUB-D/
9-way SUB-D
RS 232C 2.5 m
Type of
connectors
Serial
port
XBT R
AP SLC5
XBT R
AP PLC5
XBT R
AP Micro-logix
25-way SUB-D/
9-way SUB-D
25-way SUB-D/
25-way SUB-D
25-way SUB-D/
Micro-logix 1000
RS 232C 2.5 m
XBTZ9730
RS 232C 2.5 m
XBTZ9720
RS 232C 2.5 m
XBTZ9731
XBT R
Length Reference
XBTZ9740
Rockwell, Allen-Bradley PLCs
4
Old range XBT P
Type of
Type of
terminal
connectors
DF1 protocol
XBT P
25-way SUB-D/
AP SLC5
9-way SUB-D
XBT P
25-way SUB-D/
AP PLC5
25-way SUB-D
XBT P
25-way SUB-D/
AP
Micro-logix 1000
Micro-logix
DH 485 point-to-point protocol
XBT P
25-way SUB-D/
AP
Micro-logix 1000
Micro-logix
DH 485 multidrop protocol
XBT P
25-way SUB-D/
SLC500
9‑way SUB-D
with AIC
gateway
Serial
port
Length Reference
XBT R range
Type of terminal
Length Reference
RS 232C 2.5 m
XBTZ9730
RS 232C 2.5 m
XBTZ9720
RS 232C 2.5 m
XBTZ9731
RS 232C 2.5 m
XBTZ9732
XBT R
AP Micro-logix
25-way SUB-D/
Micro-logix 1000
RS 232C 2.5 m
XBTZ9732
RS 232C 2.5 m
XBTZ9730
XBT R
25-way SUB-D/
AP SLC5 with AIC Micro-logix 1000
gateway
RS 232C 2.5 m
XBTZ9732
Siemens Simatic® PLCs
Old range XBT P
Type of
Type of
terminal
connectors
PPI (S7) protocol
XBT P
25-way SUB-D/
9‑way SUB-D
Serial
port
Length Reference
RS 485
2.5 m
XBTZ9721
XBT R range
Type of terminal
XBT R
Type of
connectors
Serial
port
Length Reference
25-way SUB-D/
9-way SUB-D
RS 485
2.5 m
Type of
connectors
Serial
port
Length Reference
XBTZ9721
Equivalent product table - Connection to Uni-Telway™ serial link
Old range XBT P
Type of
Type of
Serial
terminal
connectors
port
On subscriber socket TSX SCA 62
XBT P
25-way SUB-D/
RS 485
15‑way SUB-D
On cable connector TSX P ACC 01
XBT P
25-way SUB-D/
RS 485
8-way mini-DIN
Length Reference
XBT R range
Type of terminal
1.8 m
XBTZ908
XBT R
25-way SUB-D/
15-way SUB-D
RS 485
1.8 m
XBTZ908
2.5 m
5m
XBTZ968
XBTZ9681
XBT R
25-way SUB-D/
8-way mini-DIN
RS 485
2.5 m
5m
XBTZ968
XBTZ9681
Type of
connectors
Serial
port
Length Reference
XBT R
25-way SUB-D/
15-way SUB-D
RS 485/
RS422
1.8 m
XBTZ908
XBT R
25-way SUB-D/RJ45
RS 485
2.5 m
XBTZ938
Equivalent product table - Connection to Modbus® serial link
Old range XBT P
Type of
Type of
Serial
Length Reference
terminal
connectors
port
On subscriber socket TSX SCA 64
XBT P
25-way SUB-D/
RS 485/ 1.8 m
XBTZ908
15-way SUB-D
RS422
On 8 port splitter box LU9 GC3
XBT P
25-way SUB-D/RJ45 RS 485 2.5 m
XBTZ938
1/18
XBT R range
Type of terminal
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT RT Small Panels
1
With semi-graphic and touchscreen
Type
Display
Specifications
Capacity
10 lines, 33 characters
Type
Back-lit LCD green
Functions
Representation of variables
Alphanumeric, bargraph, curves, button and light
Alarm log
Yes
Communication
Serial link
1 RJ45 (RS 232 - RS 485) + 1 miniDin (RS232) (2)
Data entry
2
Back-lit LCD green, orange, red
Via keypad with 12 keys (10 customizable keys) or touchscreen
Yes
3
Downloadable protocols
Uni-TE™, Modbus® Master, Siemens, Rockwell, Omron, Mitsubishi
Development software
Vijeo Designer™ Lite (on Windows XP® and Windows Vista®)
Dimensions W x D x H
137 x 37 x 118 mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon Premium™, Modicon M340™, Modicon Quantum™, Zelio® (1)
Supply voltages
5 VDC or PLC power supply
24 VDC
References
XBTRT500
XBTRT511
4
(1) For XBTRT511 only
Introduction:
pages 1/6 to 1/7
Dimensions:
page 1/68
1/19
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References
Magelis® XBT RT Small Panels
Magelis Small Panels
Downloadable exchange Compatible PLCs
protocol
1
Type of screen
Reference
Weight
kg
Twido®, Nano, TSX Micro™, 5 V c via PLC
Premium™, Modicon® M340™ terminal port
Green backlit
LCD (198 x 80
pixels)
XBTRT500
0.550
Twido, Nano, TSX Micro™,
24 V c external
Premium, TSX Series 7,
supply
™
™
Momentum , Quantum ,
other Modbus slave devices,
Modicon M340
Green, orange
XBTRT511
and red backlit
LCD (198 x 80
pixels) + 13
indicator LEDs +
buzzer
–
Terminal with 10 lines of 30 characters (with matrix screen)
Uni-TE™, Modbus®
XBT RT500
2
3
Software
XBT RT511
Description
Configuration software
Operating system
Windows 2000®, Windows XP® and Windows Vista®
Reference
See pages
3/7 and 3/17
Details
Reference
–
Accessories (1)
Description
DA573255
4
Supply voltage
R
ENTE
MOD
ESC
F1
DEL
1
F2
7
F3
8
F4
9
+/-
F11
DA573256
XBT ZR01
ESC
F1
DEL
1
7
F7
F2
F8
2
8
3
F3
F9
9
4
F4
0
F10
MOD
5
F5
+/-
F11
XBT ZR02
R
ENTE
6
F6
F5
0
F10
F9
F8
F7
5
4
3
2
6
F6
.
F12
.
For use with
Flush mounting accessory Kit for applications requiring a higher degree of All XBTRT
dust and damp
protection or customization of the panel, using a
flat metal strip (not included)
Protective sheets
10 peel-off sheets
All XBTRT
XBTZR01
Weight
kg
–
XBTZR02
–
Sheets of re-usable labels 10 sheets of 6 labels
XBTRT500
XBLYRT00
–
XBTRT511
XBLYRT01
–
–
XBTZRCO
–
Mechanical adaptor for
substitution
XBT P/PM
F12
Description
Downloading adaptor (2)
Zelio controller cable
Compatibility Type of
connector
XBTRT500
RJ45-RJ45
XBTN401
XBTR411
XBTRT511
Physical
link
RS 485
Zelio SR2/SR3 –
Protocol
Modbus
Length Reference
m
0.2
XBTZRT999
Zelio® Logic
2.5m
SR2CBL08
Weight
kg
–
–
(1)Other accessories, see page 1/21.
Other connection cables and accessories, see pages 1/21 to 1/23.
(2)Also included in kit XBT Z 945.
Introduction:
pages 1/6 to 1/7
1/20
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References
Separate parts for Magelis® XBT N/R/RT
Small Panels
Accessories
Type
Sold in
lots of
1
Unit reference
XBT ZRT PW
Weight
kg
–
XBT RT downloading adaptor XBT RT500/511
(2)
1
XBT ZRT999
–
Spring clips
(replacement parts)
XBT N/R/RT/GT
12
XBT Z3002
0.200
Power supply connector
XBT N/R/RT
10
XBT Z3004
0.200
External 5 V adaptor (1)
Compatibility
XBT N200/N400
XBT R400
XBT RT500
Connection to PCs and printers
Use
Compatibility
Cables for PC connection, RS XBT N401/N410/NU400 XBT
232C serial port
R410/R411
1
2
3
Length
2.5 m
Connector,
peripheral end
9-pin male SUB-D
Reference
XBT Z915
Weight
kg
0.200
0.200
XBT N200/N400/R400
XBT RT500/RT511
2.5 m
9-pin male SUB-D
and
mini-DIN (PS/2)
XBT Z945
USB cable for PC connection
(3)
XBT N/R/RT
–
USB type A male
TSX CUSB 485
XBT adaptor for USB cable
XBT N/R/RT
2m
Set of 2 cables
XBT Z925
RJ45/RJ45
RJ45/25-pin SUB-D
–
Serial printer cable
XBT N/R/RT
2.5 m
25-pin female SUB-D XBT Z926
0.220
4
–
(1)Use a c 5 V power supply: ABL 8MEM 05040.
(2)Cable XBT Z945 included.
(3)Adaptor XBT Z925 to be used with the cable.
1/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Separate parts for Magelis® XBT N/R/RT
Small Panels
Cables for connecting Magelis® terminals
Type of PLC
to be connected
1
Type of
connector
Physical Protocol
link
Length
Reference
Weight
kg
Direct connection of terminals XBT N/R/RT (XBT N200/N400/R400/RT500/RT511) to
Schneider Electric PLCs
2
Twido®, Modicon® Nano™,
Modicon® TSX Micro™,
Modicon® Premium™
Mini-DIN
Modicon® M340™
RJ45
RS 485
RS 485
Modbus®/
Uni-TE™
2.5 m
XBT Z9780
–
10 m
XBT Z9782 (1)
–
Modbus®
2.5 m
XBT Z9980
–
10 m
XBT Z9982 (1)
–
Direct connection of terminals XBT N/R (XBT N410/N401/R410/R411) to Schneider Electric PLCs
3
4
Twido, Modicon Nano, Modicon Terminal port,
TSX Micro, Modicon Premium 8-pin female
mini-DIN
RS 485
Uni-TE
(V1/V2) and
Modbus
2.5 m
XBT Z968
0.180
5m
XBT Z9681
0.340
2.5 m (2)
XBT Z9680
Modicon Premium
with TSX SCY 2160p
25-pin female SUB-D
0.170
RS 485
Uni-TE
(V1/V2)
2.5 m
XBT Z918
0.230
Modicon® Quantum™
9-pin male SUB-D
RS 232
Modbus
2.5 m
XBT Z9710
0.210
Advantys™ STB
HE13 (NIM)
RS 232
Modbus
2.5 m
XBT Z988
0.170
Modicon® Momentum™ M1
(Port 1)
RJ45
RS 232
Modbus
2.5 m
XBT Z9711
0.210
Modicon M340
RJ45
RS 485
Modbus
2.5 m
XBT Z938
0.210
Direct connection of terminals XBT N/R/RT (XBT N401/R411/RT511) to Schneider Electric PLCs via the
2nd mini-DIN serial port and Vijeo Designer™ Lite 1.3 minimum
Zelio® Logic
Programming port
–
Zelio
3m
SR2 CBL 08
–
XBT Z9715
–
Direct connection of terminals XBT RT500/RT511 to Advantys™ STB I/O (3)
Advantys™ STB
HE13 (NIM)
RS 232
Modbus
2.5 m
Direct connection of terminals XBT (XBT NU400/N410/N401/R410/R411) to Schneider Electric motor
starters and drives
Starter-controllers TeSys® U, T RJ45
Drives Altivar® 31/38/58/71
Soft starter ATS 48
Lexium® 05, Preventa™ XPSMC
RS 485
Modbus
2.5 m
XBT Z938
0.210
Direct connection of terminals XBT (XBT N200/N400/R400/RT500/RT511) to Schneider Electric motor
starters and drives (4)
Starter-controllers TeSys U, T RJ45
Drives Altivar® 31/38/58/71
Soft starter ATS 48
Lexium 05, Preventa XPSMC
RS 485
Modbus
2.5 m
XBT Z9980
–
Direct connection of terminals XBT (XBT N410/N401/R410/R411) to third party PLCs
Allen-Bradley SLC5
PLC5
9-pin male SUB-D
25-pin female SUB-D
RS 232
RS 232
DF1
DF1
2.5 m
2.5 m
XBT Z9730
XBT Z9720
0.210
0.210
Micro-logix
Micro-logix 1000
RS 232
DF1
DH485
2.5 m
2.5 m
XBT Z9731
XBT Z9732
0.210
–
Mitsubishi
FX
8-pin female
Mini-DIN
RS 232/ Melsec FX
RS 422
converter
2.5 m
XBT Z980
Omron
CPM1, CPM2,
CJ1, CS1
9-pin male SUB-D
RS 232
Sysmac® Way
2.5 m
XBT Z9740
0.210
Siemens
S7 (PG)
9-pin male SUB-D
RS 485
PPI
2.5 m
XBT Z9721
0.210
–
(1)For XBT N200/N400/R400/RT500 use cable with adaptor XBT ZRT PW and a c 5 V power supply.
(2)Elbowed SUB-D connector.
(3)For XBT RT500 use a cable with adaptor XBT ZRT PW and a c 5 V power supply.
(4)For Magelis XBT N200/N400/R400/RT500 use a cable with adaptor XBT ZRT PW and a c 5 V power supply.
1/22
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Separate parts for Magelis® XBT N/R/RT
Small Panels
Cables for connecting Magelis® terminals (continued)
Direct connection of terminals XBT RT500/ RT511 to third party PLCs (1)
Allen-Bradley SLC5
Micro-logix
9-pin male SUB-D
Micro-logix 1000
RS 232
RS 232
DF1
DF1
2.5 m
2.5 m
XBT Z9734
XBT Z9733
–
–
Mitsubishi
FX
8-pin female
Mini-DIN
RS 232/ RS
422
converter
Melsec FX
2.5 m
XBT Z980 + (2)
–
Omron
CPM1, CPM2,
CJ1, CS1
9-pin male SUB-D
RS 232
Sysmac® Way
2.5 m
XBT Z9743
–
Siemens
S7 (PG)
9-pin male SUB-D
RS 485
PPI
2.5 m
XBT ZG9721
0.210
1
2
Bus and network connections for terminals XBT N410/N401/R410/R411
Type of bus/network
Uni-Telway™ serial link
Modbus® serial link
Tap-off
units
Type of connector
Length
Reference
Weight
kg
Subscriber socket TSX
SCA 62
Connection box TSX P
ACC 01
15-pin female SUB-D
1.8 m
XBT Z908
0.240
8-pin female mini-DIN
2.5 m
5m
XBT Z968
XBT Z9681
0.180
0.340
Subscriber socket TSX
SCA 64
8 port Modbus
splitter box LU9 GC3,
Modbus tap-off,
TWD XCA ISO,
TWD XCA T3RJ
15-pin female SUB-D
1.8 m
XBT Z908
0.240
RJ45
2.5 m
XBT Z938
0.210
3
4
Bus and network connections for terminals XBT RT511
Type of bus/network
Tap-off units
Type of connector
Length
Reference
Weight
kg
Uni-Telway serial link
Connection box TSX P
ACC 01
8-pin female mini-DIN
2.5 m
XBT Z9780
0.180
Modbus serial link
8 port Modbus
splitter box LU9 GC3,
Modbus tap-off,
TWD XCA ISO,
TWD XCA T3RJ
RJ45
2.5 m
XBT Z9980
–
(1)For XBT RT500 use a cable with adaptor XBT ZRT PW and a c 5 V power supply.
(2)Adaptor XBT ZG939 to be used with cables with “+ (3)” after the reference.
1/23
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection guide
1
Operator dialog terminals
Magelis® XBT GT, XBT GK, XBT GH, XBT GTW
Advanced Panels
Applications
Display of text messages, graphic objects and synoptic views
Control and parametering of data
Type of terminal
Touch screen Advanced Panels
2
3
Display
Type
Back-lit monochrome (amber Back-lit monochrome or color Back-lit color STN LCD or TFT
or red mode) STN LCD
STN LCD or back-lit color TFT LCD (640 x 480 pixels)
(320 x 240 pixels) or TFT LCD LCD (320 x 240 pixels)
Size
3.8" (monochrome or color)
Data entry
4
Memory capacity
Functions
7.5" (color)
32 MB Flash EPROM
Via touch screen
Static function keys
–
Dynamic function keys
–
Service keys
–
Alphanumeric keys
–
Application
32 MB Flash EPROM
16 MB Flash EPROM
Expansion
–
By 128, 256, 512 MB, 1, 2 or 4 GB CF card (except XBT GT2110)
Maximum number of pages
Limited by internal Flash
EPROM memory capacity
Limited by internal Flash EPROM memory capacity or CF card
memory capacity
Variables per page
Representation of variables
Recipes
Curves
Alarm logs
Real-time clock
Digital inputs/outputs
Unlimited (8000 variables max.)
Alphanumeric, bitmap, bargraph, gauge, tank, tank level indicator, curves, polygon, button, light
32 groups of 64 recipes comprising 1024 ingredients max.
Yes, with log
Yes
Built-in
–
1 input (reset) and 3 outputs
(alarm, buzzer, run)
–
1 audio input (microphone),
1 composite video input (digital
or analog camera), 1 audio
output (loudspeaker) (1)
Multimedia inputs/outputs
Communication
5.7" (monochrome or color)
Asynchronous serial link
Uni-TE™ (2), Modbus®, Modbus TCP/IP (1) and for PLC brands: Mitsubishi, Omron,
Allen-Bradley and Siemens
RS 232C/RS 485 (COM1)
RS 232C/RS 422/485 (COM1) and RS 485 (COM2)
USB ports
Bus and networks
1
–
Printer link
USB port for parallel printer
Downloadable protocols
1
2
Modbus Plus™ and Fipway® with USB gateway, Profibus DP
and DeviceNet™ with optional card
Ethernet TCP/IP (10BASE-T/100BASE-TX) (1)
RS 232C (COM1) serial link, USB port for parallel printer
Development software
Operating system
Vijeo Designer™ (page 3/17) (on Windows XP® and Windows Vista®)
Magelis
Magelis
Magelis®
(200 MHz RISC CPU)
(133 MHz RISC CPU)
(266 MHz RISC CPU)
Terminal type
XBT GT11/13
Pages
1/24
XBT GT21/22/23
XBT GT42/43
1/32
1/34
1/36
(1) Depending on model.
(2) Uni-TE version V2 for Twido controller and TSX Micro/Premium platform.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
Touch screen Advanced Panels
2
Back-lit color STN LCD or TFT LCD (640 x 480
pixels)
Back-lit color TFT LCD (800 x 600 pixels)
Back-lit color TFT LCD (1024 x 768 pixels)
10.4" (color)
12.1" (color)
15" (color)
3
Via touch screen
–
4
–
–
–
32 MB Flash EPROM
By 128, 256, 512 MB, 1, 2 or 4 GB Compact Flash card
Limited by internal Flash EPROM memory capacity or CF card memory capacity
Unlimited (8000 variables max.)
Alphanumeric, bitmap, bargraph, gauge, tank, tank level indicator, curves, polygon, button, light
32 groups of 64 recipes comprising 1024 ingredients max.
Yes, with log
Yes
Built-in
1 input (reset) and 3 outputs (alarm, buzzer, run)
1 audio input (microphone), 1 composite video input (digital or analog camera), 1 audio output (loudspeaker) (1)
Uni-TE™ (2), Modbus®, Modbus TCP/IP (1) and for PLC brands: Mitsubishi, Omron, Allen-Bradley and Siemens
RS 232C/RS 422/485 (COM1) and RS 485 (COM2)
2
Modbus Plus™ with USB gateway
Ethernet TCP/IP (10BASE-T/100BASE-TX)
RS 232C (COM1) serial link, USB port for parallel printer
Vijeo Designer™ (page 3/17) (on Windows XP® and Windows Vista®)
Magelis®
(266 MHz RISC CPU)
XBT GT52/53
XBT GT63
XBT GT73
1/37
1/39
1/39
1/25
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection guide
1
Operator dialog terminals
Magelis® XBT GT, XBT GK, XBT GH, XBT GTW
Advanced Panels
Applications
Display of text messages, graphic objects and synoptic views
Control and parametering of data
Type of terminal
Advanced Panels with keypad
2
3
Display
Type
Color TFT LCD
(320 x 240 pixels) or monochrome STN LCD
Color TFT LCD
(640 x 480 pixels)
Size
5.7" (monochrome or color)
10.4" (color)
Data entry
4
Memory capacity
Functions
Communication
Via keypad and/or touch screen (configurable) and/or by industrial pointer
Static function keys
10
12
Dynamic function keys
14
18
Service keys
8
Alphanumeric keys
12
Application
16 MB Flash EPROM
Expansion
By 128, 256, 512 MB, 1, 2 or 4 GB Compact Flash card
Maximum number of pages
Variables per page
Representation of variables
Recipes
Curves
Alarm logs
Real-time clock
Digital inputs/outputs
Limited by internal Flash EPROM memory capacity or CF card memory capacity
Unlimited (8000 variables max.)
Alphanumeric, bitmap, bargraph, gauge, tank, tank level indicator, curves, polygon, button, light
32 groups of 64 recipes comprising 1024 ingredients max.
Yes, with log
Yes
Built-in
–
1 input - 3 outputs
Multimedia inputs/outputs
–
Downloadable protocols
Uni-TE™ (2), Modbus®, Modbus TCP/IP (1) and for PLC brands: Mitsubishi, Omron,
Allen-Bradley and Siemens
Asynchronous serial link
RS 232C/RS 422/485 (COM1)
RS 485 (COM2)
1
2
Modbus Plus™, Fipway® with USB gateway, Profibus DP and DeviceNet™ with optional card
Ethernet TCP/IP (10BASE-T/100BASE-TX)
RS 232C (COM1) serial link, USB port for parallel printer
USB ports
Bus and networks
Printer link
32 MB Flash EPROM
–
Development software
Operating system
Vijeo Designer™ (page 3/17) (on Windows XP® and Windows Vista®)
Magelis®
(266 MHz RISC CPU)
Terminal type
XBT GK 21/23
Pages
1/26
XBT GK 53
1/41
1/42
(1) Depending on model.
(2) Uni-TE version V2 for Twido controller and TSX Micro/Premium platform.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Display of text messages, graphic objects and synoptic views
Control and parametering of data
Portable Advanced Panels
1
Open touch screen Advanced Panels
2
Color TFT LCD
(640 x 480 pixels)
Color TFT LCD
(800 x 600 pixels)
Color TFT LCD
(800 x 600 pixels)
Color TFT LCD
(1024 x 768 pixels)
5.7" (color)
8.4" (color)
12" (color)
15" (color)
Via touch screen
Via touch screen
11
–
–
–
–
–
–
–
32 MB Flash EPROM
1 GB CF system card included with
terminal, expandable to 4 GB
3
4
2 GB CF system card included with terminal,
expandable to 4 GB
By 128, 256, 512 MB, 1, 2 or 4 GB Compact Flash card
Limited by internal Flash EPROM memory capacity or CF card memory capacity
Unlimited (8000 variables max.)
Alphanumeric, bitmap, bargraph, gauge, tank, tank level indicator, curves, polygon, button, light
32 groups of 64 recipes comprising 1024 ingredients max.
Yes, with log
Yes
Built-in
–
1 audio output
Uni-TE™ (2), Modbus®, Modbus TCP/IP Uni-TE (2), Modbus®, Modbus TCP/IP (1) and for PLC brands: Mitsubishi, Omron, Allen-Bradley and Siemens
and for PLC brands: Mitsubishi,
Omron, Rockwell Automation and
Siemens
RS 232C/RS 422-485 (COM1)
RS 232C (COM1)
RS 232C (COM1)
RS 232C (COM1)
RS 232C (COM2)
RS 232C (COM2 )
1
4
4 + 1 front mounted
–
Modbus Plus™ with USB gateway
1 Ethernet port (10BASE-T/100BASE-TX) 1 Ethernet TCP/IP port (10BASE-T/100BASE-TX) and 1 Ethernet port (10BASE-T/100BASE-TX/1 GB)
–
RS 232C (COM1 or COM2) serial link, USB port for parallel printer
Vijeo Designer™ (page 3/17) (on Windows XP® and Windows Vista®)
Windows XP® Embedded
Magelis®
(266 MHz RISC CPU)
XBT GH 2460
XBT GTW 450
1/44
1/47
(1) Depending on model.
(2) Uni-TE version V2 for Twido controller and TSX Micro/Premium platform.
XBT GTW 652
XBT GTW 750
1/47
1/48
1/27
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction
Operator dialog terminals
Magelis® XBT GT, XBT GK, XBT GH, XBT GTW
Advanced Panels
Introduction
1
2
3
Touch screen terminals with monochrome or color screen in 6 sizes from 3.8" to 15"
The Magelis® offer includes:
b Range of 16 touch screen terminals (XBT GT) available with a wide choice of
screen sizes (3.8", 5.7", 7.5", 10.4" 12.1" and 15") in various versions (monochrome,
color, STN or TFT).
b Range of 3 keypad/touch screen terminals (XBT GK), sizes 5.7" and 10.4"
(monochrome, color).
b Range of 2 open touch screen terminals (XBT GTW), sizes 8.4" and 15" with
Windows XP Embedded for open access to new automation functions.
b Portable touch screen terminal (XBT GH) with 5.7" color screen and safety
devices (emergency stop, enabling grip switch, etc.).
4
Operation
Magelis XBT terminals feature new information and communication technologies
which, depending on model, include:
b High level of communication (on-board Ethernet, multilink, Web server and FTP).
b External storage of data (Compact Flash memory card and USB Memory Stick) for
storing production data and backing up applications.
b Multimedia data with integrated image and sound management (digital or
analog camera).
b Peripheral management: printers, bar code readers, loudspeakers, etc.
1/28
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Functions,
description
Operator dialog terminals
Magelis® XBT GT, XBT GK, XBT GH, XBT GTW
Advanced Panels
Configuration
Magelis® XBT terminals can be configured using Vijeo Designer™ VJD ppD TGS
VppM software, in a Windows XP® or Windows Vista® environment.
The advanced ergonomics of the Vijeo Designer VJD ppD TGS VppM software,
designed around several functional windows, enables quick and simple
development of a project. This version enables composite video signal processing
from a camera or camcorder.
See pages 3/8 to 3/10.
1
2
3
Video sequence display
Communication
4
XBT GTW
XBT GT
Twido®
Modicon® M340™
Modbus® / Uni-Telway™
XBT GK
Ethernet TCP/IP
Premium™
XBT GT
Quantum™
XBT GH
Modicon M340
CANopen
Advantys™ STB
Altivar® 71
Magelis® XBT terminals communicate with PLCs via one or two integrated serial
links, using communication protocols:
b Schneider Electric (Uni-TE™, Modbus®)
b Third party: Mitsubishi Electric, Omron, Allen-Bradley and Siemens
Magelis multifunction terminals can be connected, depending on the model, to
Ethernet TCP/IP networks using Modbus TCP or third party protocols, and to
fieldbuses (FIPWAY®, Modbus Plus™, DeviceNet™, Profibus DP).
1/29
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Functions,
description (continued)
Operator dialog terminals
Magelis® XBT GT, XBT GK, XBT GH, XBT GTW
Advanced Panels
Functions
Magelis® XBT terminals provide the following functions:
b display of animated synoptic views with 8 types of animation (pressing touch
panel, changing of color, filling, movement, rotation, size, visibility and value display),
b control, modification of numeric and alphanumeric variables,
b display of date and time,
b real-time and trending curves with log,
b alarm display, alarm log and management of alarm groups,
b multiwindow management,
b operator initiated page calls,
b multilingual application management (10 languages at the same time),
b recipes management,
b data processing via Java script,
b application and log storage on external Compact Flash application memory card
(multifunction range) or USB key,
b serial printer and bar code reader management (multifunction range),
b sound messages management (multifunction range),
composite video signal management from camera or camcorder on XBT GT and
digital video signal (Webcam) management on XBT GTW.
1
2
3
XBT terminals have been designed for Transparent Ready® architectures and
equipment (combination of Web and Ethernet TCP/IP technologies).
4
Therefore, all terminals with an Ethernet port integrate an FTP server for data file
transfer and a Web Gate function for remote access to the application of the XBT
terminal from a PC with an Internet browser.
The latest version of Vijeo Designer™ therefore allows terminal XBT to browse
HTML pages.
The flexibility of embedded Windows XP® enables Internet Explorer® or Microsoft
Office® Readers (.pdf, .doc, .xls, .ppt documents) to be used on XBT GTW touch
screen/open terminals while a Vijeo Designer™ application is running.
1/30
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Functions,
description (continued)
Magelis® XBT GT, XBT GK, XBT GH, XBT GTW
Advanced Panels
Operating modes of the terminals
The following illustrations show the equipment that can be connected to XBT
terminals according to their two operating modes.
1
Editing mode
Ethernet network (1)
2
USB
Memory
Stick
XBT GT
XBT GK
XBT GH
XBT GTW
PC running Vijeo
Designer™ software
3
Connection cable
XBT ZG915/925/935
Compact Flash
memory card (2)
4
Operating mode
Modicon® M340™ PLC
USB hub
Bar code reader (3)
Bar code reader
(3)
Memory
Stick
Ethernet network (1)
XBT Z915
Serial
printer
Mouse
Serial
printer (4)
XBT GT
XBT GK
Keyboard
XBT GH + XBT ZGJBOX
XBT GTW
TSX PCX 1031
Twido®
COM1
USB
Compact Flash
memory card (2)
XBT Z9780
COM2 (7)
Alarm
(beacon) (5)
Modicon® Premium™
Camera (6)
Microphone (6)
Loudspeaker (5)
(1)With XBT GTpp30/XBT GTpp40, XBT GKpp30/XBT GTWppp0/XBT GH2460.
(2)Memory card, except XBT GT11/13/2110.
(3) Validated with DataLogic Gryphon bar code reader.
(4) Validated with Hewlett Packard printer via USB/PIO converter.
(5)With all XBT GT, XBT GK and XBT GTW multifunction 7.5" to 15".
(6)With multimedia XBT GT 7.5" to 15" XBT GTp340.
(7)With XBT GT and XBT GK 5.7" mini screen.
Improve environmental resistance with Conformal Coating
The Conformal Coating service offer consists of varnishing the electronic cards to
prolong the service life of the terminals and allow their use in corrosive
environments. The varnishing increases resistance to condensation, dusty
atmospheres and chemical corrosion (sulphurous and halogenous atmospheres).
For further information on this offer, please consult our Customer Care Center.
1/31
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GT Advanced Panels with
3.8" screen
Description
1
Magelis® XBT GT1105/1135/1335 Advanced Panels
Front panel
The front panels of Magelis® XBT GT1105/1135/1335 Advanced Panels feature:
1
1 Touch screen for displaying synoptic views (3.8” amber or red mode
monochrome, color TFT)
2 Control lamp indicating the operating mode of the terminal
2
3
2
Rear panel
3
The rear panels of Magelis® XBT GT1105/1135/1335 Advanced Panels include:
1 Removable screw terminal block for the 24 V c power supply
2 RJ45 connector for RS 232C or RS 485 serial link connection to PLCs (COM1)
3 USB type A host connector for connecting peripherals, transferring applications and
Modicon® M340™ terminal port communication
4 Switch for polarization of the serial link, used on RS 485 Modbus®
4
On XBT GT1135/1335 only
5 RJ45 connector for Ethernet TCP/IP link, 10/100BASE-T
1
Specifications:
page 1/33
1/32
4
2
5
References:
pages 1/50 to 1/59
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT GT Advanced Panels with
3.8" screen
1
Type
Display
Functions
Communication
Specifications
LCD screen size / Resolution
3.8” / QVGA
Type
STN monochrome, amber or red
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
TFT 256 color
Curves / Alarm logs
Yes, with log / Yes, incorporated
Serial link
1 RJ45 (RS 232 - RS 485)
Networks
–
2
Ethernet, IEEE 802.3
10/100 BASE-T, RJ45
Downloadable protocols
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley),
Siemens (Simatic®), Uni-TE™, Modbus®, Modbus TCP
Development software
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7)
Dimensions W x D x H
130 3 41 3 104 mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon Premium™, Modicon Quantum™, Modicon M340™
Compact Flash card slot
No
USB port Host type A
1
1
Built-in Ethernet TCP/IP
No
Yes
Supply voltage
24 VDC
References
XBTGT1105
Description:
page 1/32
References:
pages 1/50 to 1/59
XBTGT1135
3
1
4
XBTGT1335
Dimensions:
page 1/68
1/33
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GT Advanced Panels with
5.7" screen
Description
1
Magelis® XBT GT2110 and multifunction XBT GT2p20 & XBT GT2p30 Advanced Panels
2
1
The front panel features:
1 Touch screen for displaying synoptic views (5.7” monochrome or color)
2 Multicolor lamp (green, orange and red) indicating the operating mode of the
terminal
2
3
4
The rear panel includes:
4
3
1 Removable screw terminal block for the 24 V c power supply
2 USB type A host connector for connecting peripherals, transferring applications
and Modicon® M340™ terminal port communication
3 9-way male SUB-D connector for RS 232C or RS 422/485 serial link to PLCs
(COM1)
4 Expansion unit interface for fieldbus communication card (DeviceNet,
Profibus DP) (1)
5 Switch for polarization of the COM2 serial link, used on Modbus®
6 RJ45 connector for RS 485 serial link (COM2)
7 Compact Flash memory card slot, with cover (except XBT GT2110 optimum
model).
5
2
1
6
7
8
On XBT GT2130 and GT2330 only:
8 RJ45 connector for Ethernet TCP/IP link, 10BASE-T/100BASE-TX
(1) Connection accessories required (see pages 1/55 to 1/59).
Specifications:
page 1/35
1/34
References:
pages 1/50 to 1/59
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT GT Advanced Panels with
5.7" screen
1
Type
Display
Specifications
LCD screen size / Resolution 5.7” / QVGA
Type
Functions
Communication
5.7” / VGA
STN Monochrome
STN, color
Blue
backlighting
4096 colors
Black and White
backlighting
TFT, color 65536 colors
High brightness
backlighting
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves / Alarm logs
Yes, with log / Yes, incorporated
Serial link
1 Sub-D9 (RS 232/RS 422 - RS 485) + 1 RJ45 (RS 485)
Networks
–
–
Ethernet,
IEEE 802.3
10/100
BASE-T,
RJ45
–
Ethernet,
IEEE 802.3
10/100
BASE-T,
RJ45
Ethernet
10/100
BASE-T
Ethernet,
IEEE 802.3
10/100
BASE-T,
RJ45
Downloadable protocols
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley), Siemens (Simatic®)
Uni-TE™, Modbus®, Modbus TCP/IP
Development software
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7)
Dimensions W x D x H
167.5 3 60 3 135 mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon Premium™, Modicon Quantum™, Modicon M340™, Modicon
Momentum™
Compact Flash card slot
No
USB port Host type A
1
Video in
No
4
2
Built-in Ethernet TCP/IP
No
24 VDC
References
XBTGT2110
References:
pages 1/50 to 1/59
3
Yes
Supply voltage
Description:
page 1/34
2
No
Yes
No
Yes
Yes
Yes
XBTGT2120
XBTGT2130
XBTGT2220
XBTGT2330
XBTGT2930
XBTGT2430
Dimensions:
page 1/68
1/35
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GT Advanced Panels with
7.5" screen
Description
1
Magelis® XBT GT4230 & 43p0 Advanced Panels
The front panel features:
1 Touch screen for displaying synoptic views (7.5” color STN or 7.5” color TFT,
depending on the model)
2 Multicolor lamp (green, orange and red) indicating the operating mode of the
terminal
1
2
2
3
The rear panel includes:
1
2 3
4
5
6
1 Removable screw terminal block for the 24 V c power supply
2 9-way male SUB-D connector for RS 232C or RS 422/485 serial link to PLCs
(COM1)
3 RJ45 connector for RS 485 serial link (COM2) with switch for polarization of the
link used on Modbus®
4 Expansion unit interface for fieldbus communication card (DeviceNet, Profibus
DP) (1)
5 RJ45 connector for Ethernet TCP/IP link, 10BASE-T/100BASE-TX, with an
activity LED
6 USB type A host connector for connecting peripherals, transferring applications and
Modicon® M340™ terminal port communication
7 Slot for Compact Flash memory card, with pivoting cover
8 Removable I/O connector, 12 spring terminals for loudspeaker connection, one
input (reset) and 3 outputs (alarm, buzzer, run).
7
4
10 9
8
On XBT GT4340 only:
9 Mini-jack connector for connecting a microphone
10RCA connector for connecting a digital or analog video camera (NTSC/PAL)
(1) Connection accessories required (see pages 1/55 to 1/59).
Specifications:
page 1/38
1/36
References:
pages 1/50 to 1/59
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GT Advanced Panels with
10.4" screen
Description
Magelis® XBT GT5230 & XBT GT53p0 Advanced Panels
The front panel features:
1
1 Touch screen for displaying synoptic views (10.4”
color STN or 10.4” color TFT, depending on model)
2 Multicolor lamp (green, orange and red) indicating
the operating mode of the terminal
1
2
2
3
The rear panel includes:
1
2
3
10
4
9
8
1 Removable screw terminal block for the 24 V c
power supply
2 Slot for Compact Flash memory card, with pivoting
cover
3 Removable I/O connector (1), 12 spring terminals
for loudspeaker connection, one input (reset) and 3
outputs (alarm, buzzer, run).
4 Expansion unit interface for fieldbus communication
card (DeviceNet, Profibus DP) (2)
5 RJ45 connector for Ethernet TCP/IP link, 10BASET/100BASE-TX with an activity LED
6 Two USB type A host connectors for connecting
peripherals, transferring applications and Modicon®
M340™ terminal port communication
7 RJ45 connector for RS 485 serial link (COM2) with
switch for polarization of the link used on Modbus®
8 9-way male SUB-D connector for RS 232C or RS
422/485 serial link to PLCs (COM1)
5
7
6
4
On XBT GT5340 only:
9 Mini-jack connector for connecting a microphone
10RCA connector for connecting a digital or analog
video camera (NTSC/PAL)
(1)On the XBT GT5230 model, this removable connector is
located on the rear panel of the terminal.
(2) Connection accessories required (see pages 1/55 to 1/59).
Specifications:
page 1/38
References:
pages 1/50 to 1/59
Dimensions:
page 1/68
1/37
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT GT Advanced Panels with
7.5" and 10.4" screen
1
Type
2
Display
Functions
Communication
3
Specifications
7.5” / VGA
Type (color)
STN
TFT
TFT
STN
TFT
TFT
TFT
Number of colors
4096
65536
65536
4096
65536
65536
65536
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves / Alarm logs
Yes, with log / Yes, incorporated
Serial link
1 Sub-D9 (RS 232/RS 422 - RS 485) + 1 RJ45 (RS 485)
Networks
Ethernet, IEEE 802.3 10/100 BASE-T, RJ 45
Downloadable protocols
10.4” / VGA
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley), Siemens (Simatic®)
Uni-TE™, Modbus®, Modbus TCP/IP
Development software
4
10,4” / SVGA
LCD screen size / Resolution
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7)
Dimensions W x D x H (mm)
215x60x170
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon Premium™, Modicon Quantum™, Modicon M340™
Compact Flash card slot
Yes
USB port Host type A
1
1
1
2
2
2
2
Video in
No
No
Yes
No
No
Yes
No
Built-in Ethernet TCP/IP
Yes
Supply voltage
24 VDC
References
XBTGT4230 XBTGT4330 XBTGT4340 XBTGT5230 XBTGT5330 XBTGT5340 XBTGT5430
Description:
pages 1/36 to 1/37
1/38
References:
pages 1/50 to 1/59
313x56x239
271x57x213
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GT Advanced Panels with
12.1" and 15" screen
Description
Magelis® XBT GT63p0 & XBT GT7340 Advanced Panels
The front panel features:
1
1 Touch screen for displaying synoptic views (12.1” or
15” color TFT, depending on model)
2 Multicolor lamp (green, orange and red) indicating
the operating mode of the terminal
1
2
2
3
4
15” screen
12.1” screen
The rear panel includes:
3
2
1
4
1 Removable screw terminal block for the 24 V c
power supply
2 Slot for Compact Flash memory card, with pivoting
cover
3 Removable I/O connector, 12 spring terminals for
loudspeaker connection, one input (reset) and 3
outputs (alarm, buzzer, run).
4 Expansion unit interface for fieldbus communication
card (DeviceNet, Profibus DP) (1)
5 RJ45 connector for Ethernet TCP/IP link, 10BASET/100BASE-TX, with an activity LED
6 Two USB type A host connectors for connecting
peripherals, transferring applications and Modicon®
M340™ terminal port communication
7 RJ45 connector for RS 485 serial link (COM2) with
switch for polarization of the link used on Modbus®
8 9-way male SUB-D connector for RS 232C or RS
422/485 serial link to PLCs (COM1)
5
12.1” screen
10
1
9
2
8
3
7
6
4
On XBT GT6340 and XBT GT7340 only:
9 Mini-jack connector for connecting a microphone
10RCA connector for connecting a digital or analog
video camera (NTSC/PAL)
5
(1) Connection accessories required (see pages 1/55 to 1/59).
15” screen
10
Specifications:
page 1/40
9
8
References:
pages 1/50 to 1/59
7
6
Dimensions:
page 1/68
1/39
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT GT Advanced Panels with
12.1" and 15" screen
1
Type
2
Display
4
LCD screen size / Resolution 12,1” / SVGA
Type (color)
Functions
3
Specifications
Communication
15” / XGA
TFT
TFT
TFT
Number of colors
65536
65536
65536
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves / Alarm logs
Yes, with log / Yes, incorporated
Serial link
1 Sub-D9 (RS 232/RS 422 - RS 485) + 1 RJ45 (RS 485)
Networks
Ethernet, IEEE 802.3 10/100 BASE-T, RJ 45BASE-T, RJ 45
Downloadable protocols
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley),
Siemens (Simatic®), Uni-TE™, Modbus®, Modbus TCP/IP
Development software
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7)
Dimensions W x D x H (mm)
313x56x239
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon Premium™, Modicon Quantum™, Modicon M340™
Compact Flash card slot
Yes
USB port Host type A
2
Video in
No
Built-in Ethernet TCP/IP
Yes
Supply voltage
24 VDC
References
XBTGT6330
Description:
page 1/39
1/40
References:
pages 1/50 to 1/59
395x60x294
Yes
Yes
XBTGT6340
XBTGT7340
Dimensions:
page 1/68
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GK Advanced Panels with
5.7" screen
Details
Magelis® XBT GK2120 & XBT GK2330 Advanced Panels
The front panel features:
3
1
2
7
1 Touch screen for displaying synoptic views (5.7” monochrome or color)
configurable using Vijeo® Designer™ software
2 Multicolor lamp (green, orange and red) indicating the operating mode of the
terminal
3 14 dynamic keys (Ri) with 3-color LED (green, orange, red)
4 10 static keys (Ri) with 3-color LED (green, orange, red) and customizable labels
5 Industrial pointer “
” , configurable using Vijeo Designer™
6 12 alphanumeric keys (0...9, +/-, .) with successive pressing to access characters
(A...Z)
7 8 service keys:
5
Move the cursor to the right or left in an input field
ENTER
Confirm a selection or an entry
Shift
Access the second of the functions marked on the key
4
-1
+1
2
3
Delete the character to the left of the cursor
6
1
4
Increment or decrement a numeric field value or activate the next or
previous object
Exit Entry Mode
ESC
Display the terminal configuration menu
Shift
+
Shift
+ ENTER Copy the current screen
Shift
+
ESC
Delete the whole field
The rear panel includes:
4
3
76 5
1 removable screw terminal block for 24 V c power supply
2 USB type A host connector for connecting peripherals, transferring applications and
Modicon® M340™ terminal port communication
3 9-way male SUB-D connector for RS 232C or RS 422/485 serial link to PLCs
(COM1)
4 Expansion unit interface for fieldbus communication card (Profibus DP,
DeviceNet™) (1)
5 Switch for polarization of the COM2 serial link, used on Modbus®
6 RJ45 connector for RS 485 serial link (COM2)
7 Slot for Compact Flash memory card, with cover
8
On GK2330 only:
8 RJ45 connector for Ethernet TCP/IP link, 10BASE-T/100BASE-TX
1
2
(1) Connection accessories required (see pages 1/55 to 1/59).
Specifications:
page 1/43
References:
pages 1/50 to 1/59
Dimensions:
page 1/69
1/41
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GK Advanced Panels with
10.4" screen
Description
1
Magelis® XBT GK5330 Advanced Panels
The front panel includes:
3
2
1
1 Touch screen for displaying synoptic views (10.4” color TFT) configurable using
Vijeo® Designer™ software
2 Multicolor lamp (green, orange and red) indicating the operating mode of the
terminal
3 18 dynamic keys (Ri) with 3-color LED (green, orange, red)
4 12 static keys (Fi) with 3-color LED (green, orange, red) and customizable labels
5 Industrial pointer “
” , configurable using Vijeo Designer
6 12 alphanumeric keys (0...9, +/-, .) with successive pressing to access characters
(A...Z)
7 8 service keys:
2
3
Delete the character to the left of the cursor
7
Move the cursor to the right or left in an input field
6
5
4
4
ENTER
Confirm a selection or an entry
Shift
Access the second of the functions marked on the key
-1
+1
Increment or decrement a numeric field value or activate the next or
previous object
Exit Entry Mode
ESC
Display the terminal configuration menu
Shift
+
Shift
+ ENTER
Copy the current screen
Shift
+
Delete the whole field
ESC
The rear panel features:
4
2
1 3
Specifications:
page 1/43
1/42
8
1 Removable screw terminal block for 24 V c power supply
2 Slot for Compact Flash memory card, with pivoting cover
3 Removable I/O connector, 12 spring terminals for loudspeaker connection, one
input (reset) and 3 outputs (alarm, buzzer, run)
4 Expansion unit interface for fieldbus communication card (DeviceNet™,
Profibus DP)
5 RJ45 connector for Ethernet TCP/IP link, 10BASE-T/100BASE-TX with an activity
LED
6 Two USB type A host connectors for connecting peripherals, transferring
applications and Modicon® M340™ terminal port communication
7 RJ45 connector for RS 485 serial link (COM2) with switch for polarization of the
link used on Modbus®
8 9-way male SUB-D connector for RS 232C or RS 422/485 serial link to PLCs
(COM1)
7
6 5
References:
pages 1/50 to 1/59
Dimensions:
page 1/69
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
Operator dialog terminals
Magelis® XBT GK Advanced Panels with
5.7" and 10.4" screen
1
Type
Display
Data entry
Functions
Communication
Specifications
Screen size / Resolution
5.7” / QVGA
Type
STN monochrome
TFT Color
black and white
65536 colors
Soft function keys with LED
14
18
Static function keys with LED
10 + legends
12 + legends
Service keys / Alphanumeric keys
8 / 12
Touchscreen and industrial pointer
Yes
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves
Yes, with log
Alarm logs
Yes
Serial link
1 Sub-D9 (RS 232/RS 422 - RS 485) + 1 RJ45 (RS 485)
Networks
–
2
10.4” / VGA
3
4
Ethernet, IEEE 802.3 10/100 BASE-T, RJ 45
Downloadable protocols
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley),
Siemens (Simatic®), Uni-TE™, Modbus®, Modbus TCP/IP
Development software
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7)
Compact Flash card slot
Yes
Dimensions W x D x H
220.3x88x265mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon Premium™, Modicon Quantum™, Modicon M340™
USB port
1
1
2
Video in
No
No
No
Built-in Ethernet TCP/IP
No
Yes
Supply voltage
24 VDC
References
XBTGK2120
Description:
pages 1/41 to 1/42
References:
pages 1/50 to 1/59
296x91x332mm
XBTGK2330
197x92.6x147mm
XBTGK5330
Dimensions:
page 1/69
1/43
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GH Advanced Panels with
5.7" screen
Description
1
1
Overview
The Magelis® XBT GH2460 1 is a hand-held graphic terminal with a 5.7" touch
screen.
It enables connection on the Ethernet network or Modbus at each point where a
junction box XBT ZGJBOX 3 is installed.
Connection between the terminal and junction box is made by an XBT ZGHL3 or
XBT ZGHL10 cable 2.
2
2
3
3
Ethernet
Modbus®
4
5
2
4
1
3
Magelis® Advanced Panels XBT GH2460
Front panel features:
1 Graphical display touch screen (5.7" color), configurable using Vijeo® Designer™
software.
2 Multicolor LED (green, orange and red) indicating the operating mode of the
terminal.
3 11 function keys Fi.
4 Operating button with O.P. signalling LED (green) for touch screen validation.
5 Emergency stop button with 2 NC safety contacts and 1 NO auxiliary contact for
stopping the machine if required.
12
6
7
8
Rear panel features:
6 A type USB host connector for peripheral connection, application transfer (with
protective cover).
7 Slot for Compact Flash memory card (also protected by the cover).
8 Power On/Off key switch for the Magelis XBT GH
9 3-position enabling grip switch. The OK signal is only sent when the grip is in the
center position.
1024-pin connector for plugging-in the 3 m or 10 m flexible interface cable between
the Magelis XBT GH and the junction box.
11Stylus for the touch screen.
12Two holes for inserting changeable legends on the function keys.
11
9
10
Specifications:
page 1/46
1/44
References:
pages 1/50 to 1/59
Dimensions:
page 1/69
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Description (continued)
Description (continued)
Operator dialog terminals
Magelis® XBT GH Advanced Panels with
5.7" screen
Magelis® Junction box XBT ZGJBOX for XBT GH
It includes:
2
1
2
3
4
9-pin SUB-D connector for RS 232C or RS 422/485 serial link to PLCs (COM1).
Power On/Off switch for the junction box.
RJ45 connector for Ethernet TCP/IP, 10BASE-T/100BASE-TX link.
24-way screw terminal block for connecting the c 24 V supply and output signals
from the Magelis XBT GH terminal.
5 Link status LED with the Magelis XBT GH, 3 colors (green, orange and red).
6 2 coding wheels for configuring the station number on the junction box.
7 24-pin connector for connecting the Magelis XBT GH terminal using the 3 m or
10 m (XBT ZGHL3 or XBT ZGHL10) flexible cable.
5
7
7
1
2
1
3
3
6
4
Flexible cables XBT ZGHL3 and XBT ZGHZ10
For connecting the Magelis XBT GH terminals to their XBT ZGJBOX junction box.
Specifications:
page 1/46
References:
pages 1/50 to 1/59
4
Dimensions:
page 1/69
1/45
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT GH Advanced Panels with
5.7" screen
1
Type
2
Display
Data entry
Safety components
3
4
Functions
Specifications
Screen size / Resolution
5.7" / VGA
Type (color)
TFT
Number of colors
65 536
Function keys
11 + label
Operaton key
1 with LED (validation touchscreen)
Key Switch
Yes for ON/OFF
3 positions Enable switch
Yes, OK signal in intermediate position only
Emergency stop
Yes, red with 2 safe contacts and one auxiliary contact
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves / Alarm historic
Yes, with log / Yes, incorporated
Connection
24-pins connector (communication, alimentation, I/O)
Downloadable protocols
Mitsubishi (Melsec®), Omron (Sysmac®), Rockwell Automation (Allen-Bradley), Siemens (Simatic®)
Uni-TE™, Modbus®, Modbus TCP/IP
Development software
Vijeo Designer™ VJDpppTGpVppM (on Windows XP®, Windows Vista® and Windows 7)
Compact Flash card slot
Yes
Dimensions W x D x H (mm)
224 x 174 x 87.1
USB port
1
Supply voltage
24 VDC
Reference
XBT GH2460
Type of connector
2 x 24-pins speed connectors
Length
3m
10 m
Reference
XBTZGHL3
XBTZGHL10
Communcation
Serial link
1 SubD9 (RS232 / RS422 - RS 425)
Network
1 Ethernet RJ45 IEEE 802.3 10/100 T-BASE,
Connection
24 pins connector
Interface cable 3 or 10 m
Screw terminals blocks
For alimentation 24 VDC, state of I/O safety components
Reference
Description:
pages 1/44 to 1/45
1/46
XBTZGJBOX
References:
pages 1/50 to 1/59
Dimensions:
page 1/69
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GTW Advanced Panels with
8.4" and 12" screen
Magelis® XBT GTW terminals
1
2
3
65
3
2
8.4" touch screen front panel, XBT GTW 450
The touch screen front panel of terminal XBT GTW 450 features:
1 8.4" SVGA active matrix color TFT LCD screen (maximum display area 800 x 600
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), terminal on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
Lower faces, 8.4"
All expansion slots and connection elements are accessible from the rear of the
terminal, with the following elements located on the lower face:
1 Removable screw terminal block for connecting c 24 V power supply.
2 Two Compact Flash memory card slots, one for the card containing the operating
system and integrated software, and the other open.
3 Two 9-pin male SUB-D connectors marked COM1 and COM2 for the RS 232
serial link.
4 Four USB 2.0 ports.
5 Two RJ45 connectors for Ethernet 10/100 Mps and Ethernet 10/100 Base-TX/
1 GB link.
6 Mini-jack connector for loudspeaker.
1
4
2
3
4
1
3
8 7 5
1
4
Specifications:
page 1/49
6
2
3
4
12" touch screen front panel, XBT GTW 652
The touch screen front panel of terminal XBT GTW 652 features:
1 15" SVGA active matrix color TFT LCD screen (maximum display area 800 x 600
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), terminal on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
4 Dust and moisture protected USB port.
1
2
1
Lower faces and side, 12"
All expansion slots and connection elements are accessible from the rear of the
terminal, with the following elements located on the lower face:
1 Removable screw terminal block for connecting c 24 V power supply.
2 Slot for the Compact Flash memory card containing the operating system and
integrated software.
3 25-pin female SUB-D connector marked RAS for product monitoring and
diagnostics.
4 Two 9-pin male SUB-D connectors marked COM1 and COM2 for the RS 232
serial link.
5 Four USB 2.0 ports.
6 Mini-DIN PS/2 connector for connecting external keyboard.
7 Two RJ45 connectors for Ethernet 10/100 Mbps and Ethernet 10/100 Base-TX/
1 GB link.
8 Slot for 2 additional type II PCMCIA cards.
9 Mini-jack connector for loudspeaker.
4
References:
pages 1/50 to 1/59
Dimensions:
page 1/69
1/47
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Description
Magelis® XBT GTW Advanced Panels with
15" screen
Magelis® XBT GTW terminals
1
1
2
3
4
2
3
1
3
9
7 6 8
4
2
4
5
15" touch screen front panel, XBT GTW 750
The touch screen front panel of terminal XBT GTW 750 features:
1 15" XGA active matrix color TFT LCD screen (maximum display area 1024 x 768
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), terminal on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
4 Dust and moisture protected USB port.
Lower faces, 15"
All expansion slots and connection elements are accessible from the rear of the
terminal, with the following elements located on the lower face:
1 Removable screw terminal block for connecting c 24 V power supply.
2 Slot for the Compact Flash memory card containing the operating system and
integrated software.
3 25-pin female SUB-D connector marked RAS for product monitoring and
diagnostics.
4 Two 9-pin male SUB-D connectors marked COM1 and COM2 for the RS 232
serial link.
5 Four USB 2.0 ports.
6 Mini-DIN PS/2 connector for connecting external keyboard.
7 Two RJ45 connectors for Ethernet 10/100 Mbps and Ethernet 10/100 Base-TX/
1 GB link.
8 Slot for 2 additional type II PCMCIA cards.
9 Mini-jack connector for loudspeaker.
Pre-installed software
In addition to Windows XP® Embedded, terminals XBT GTW also have the following
software on the Compact Flash System card:
b Vijeo Designer™ Run Time, unlimited use after activation of authorization code
b Vijeo® Citect® Web Client dll on XBT GTW652/750
b Internet Explorer®.
b Adobe® Acrobat® Reader.
b Microsoft® Word/Excel®/PowerPoint® viewer
b Framework .Net® on XBT GTW 652 and 750
Specifications:
page 1/49
1/48
References:
pages 1/50 to 1/59
Dimensions:
page 1/69
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Specifications
Magelis® XBT GTW Advanced Panels with
8.4", 12" and 15" screen
1
Type
Specifications
Pre-installed Software
OS: Windows XP® Embedded, Internet Explorer®, Microsoft Office®, Adobe® Acrobat® Reader, .NET®, Vijeo Designer™ Run
Time unlimited
–
2
Vijeo® Citect® Web Client
Touchscreen
8.4 LCD TFT
12 LCD TFT
15 LCD TFT
Resolution
SVGA 800 x 600
SVGA 800 x 600
XGA 1024 x 768
1 x USB
3
Font panel ports
–
1 x USB
Processor
Celeron® M @ 600 MHz
Celeron M @ 1 GHz
Celeron M @ 600 MHz
RAM
512MB ► 1024MB
512MB ► 1024MB
512MB ► 1024MB
Storage
CF 1GB expandable to 4GB
CF 2GB expandable to 4GB
CF 2GB expandable to 4GB
Extension
–
1 x PCMCIA slot
1 PCMCIA slot (for 1 type III card or 2 type I cards)
(for 1 type II card)
Ethernet ports
2 (10/100/1G + 10/100)
2 (10/100/1G + 10/100)
2 (10/100/1G + 10/100)
Ports I/O
4 x USB, 2 x RS232
4 x USB, 1 x RS232
4 x USB, 2 x RS232
Power supply
24 VDC
24 VDC
24 VDC
Dimension
230 x 177 x 65
313 x 239 x 60
395 x 294 x 65
References
XBTGTW450
XBTGTW652
XBTGTW750
Specifications:
pages 1/47 to 1/48
References:
pages 1/50 to 1/59
4
Dimensions:
page 1/69
1/49
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References
Magelis® XBT GT Advanced Panels
Monochrome touch screen terminals (1)
1
Type of screen
XBT GT1105/1135
Number
of ports
Application Compact
Flash
memory
capacity
memory
Composite Number of Reference
video
Ethernet
input
ports
1 COM1
1 USB
32 MB
No
1 COM1
1 COM2
1 USB
16 MB
No
16 MB
Yes
Weight
kg
Optimum, 3.8" screen
STN
amber or red
No
-
XBT GT1105
1
XBT GT1135
No
-
XBT GT2110
1.000
No
-
XBT GT2120
1.000
1
XBT GT2130
1.000
Optimum, 5.7" screen
2
STN
blue mode
XBT GT21p0/2220/2330
Multifunction, 5.7" screen
STN
Black and white
3
1 COM1
1 COM2
1 USB
Color touch screen terminals (1)
Type of screen
XBT GT4230/43p0
Application Compact
Flash
memory
capacity
memory
Composite Onboard
video
Ethernet
input
Reference
Weight
1 COM1
1 USB
32 MB
No
No
1
XBT GT1335
1.000
kg
Optimum, 3.8" screen
TFT
4
Number
of ports
Multifunction, 5.7" screen
XBT GT53p0
STN
1 COM1
1 COM2
1 USB
16 MB
Yes
No
-
XBT GT2220
1.000
TFT
1 COM1
1 COM2
1 USB
16 MB
Yes
No
1
XBT GT2330
1.000
Multifunction, 7.5" screen
STN
1 COM1
1 COM2
1 USB
32 MB
Yes
No
1
XBT GT4230
1.800
TFT
1 COM1
1 COM2
1 USB
32 MB
Yes
No
1
XBT GT4330
1.800
Yes
1
XBT GT4340
1.800
Multifunction, 10.4" screen
XBT GT63p0
STN
1 COM1
1 COM2
2 USB
32 MB
Yes
No
1
XBT GT5230
3.000
TFT
1 COM1
1 COM2
2 USB
32 MB
Yes
No
1
XBT GT5330
2.500
Yes
1
XBT GT5340
2.500
Multifunction, 12.1" screen
TFT
1 COM1
1 COM2
2 USB
32 MB
Yes
No
1
XBT GT6330
3.000
Yes
1
XBT GT6340
3.000
Yes
1
XBT GT7340
5.600
Multifunction, 15" screen
TFT
XBT GT7340
1/50
1 COM1
1 COM2
2 USB
32 MB
Yes
(1)Fixing kit (screw clamps), USB connectors locking device (except XBT GT 11p0) and service
instructions included with terminals. XBT GT setting-up documentation, in electronic format,
is included with Vijeo Designer™ configuration software, see page 3/17.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Operator dialog terminals
Magelis® XBT GK/GH Advanced Panels
Keypad/touch screen terminals (1)
Type of screen
Number
of ports
Application Compact
Flash
memory
capacity
memory
Composite Number of Reference
video
Ethernet
input
ports
Weight
32 MB
Yes
No
-
XBT GK2120
–
32 MB
Yes
No
1
XBT GK2330
–
32 MB
Yes
No
1
XBT GK5330
–
kg
Multifunction, 5.7" screen
STN
Black and white
XBT GK2120/2330
1 COM1
1 COM2
1 USB
Multifunction, 5.7" screen
TFT
Color mode
1 COM1
1 COM2
1 USB
1
2
Multifunction, 10.4" screen
TFT
Color mode
1 COM1
1 COM2
2 USB
XBT GK5330
4
Hand-held touch screen terminal
Type of screen
Number
of ports
3
Application Compact
Flash
memory
capacity
memory
Composite Number of Reference
video
Ethernet
input
ports
32 MB
No
Weight
kg
Multifunction, 5.7" screen
TFT
Color mode
1
XBT GH2460 (2)
Usage
Length
Reference
Specifically for terminal XBT GH, it enables:
bb c 24 V supply to terminal XBT GH
bb connection of various safety inputs/outputs,
bb connection on multiprotocol serial link
(9-pin SUB-D) or Ethernet TCP/IP (RJ45).
Can be mounted on 35 mm DIN rail.
–
XBT ZGJBOX (2) (3)
–
XBT ZGHL3 (2)
–
XBT ZGHL10 (2)
–
1 COM1
1 USB
Yes
–
Connection components
Description
XBT GH2460
Junction box for XBT GH
XBT ZGJBOX
XBT ZGHLpp
Interface cable for XBT GH Connecting terminal XBT GH to junction box XBT 3 m
ZGJBOX
10 m
Weight
kg
(1) Fixing kit (spring clips), USB connectors locking device, customizable legend sheets and
service instructions included with terminals.
(2) Terminal XBT GH is connected to junction box XBT ZGJBOX using cable XBT ZGHLpp, to
be ordered separately (see table above). Description on page 1/44.
(3) A junction box is required at each XBT GH terminal connection point.
1/51
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Magelis® XBT GTW Advanced Panels
Open touch screen terminals (1)
Type of screen
1
Application Compact
memory
Flash
capacity
memory
Video
input
Number of Reference
Ethernet
ports
Weight
kg
Multifunction, 8.4" screen
TFT
2
Number
of ports
XBT GTW450
1 COM1
1 COM2
4 USB
256 MB
1 GB
No
RAM
expandable
expandable to 4 GB
to 1 GB, for
system and
application
2
XBT GTW450
3.500
512 MB
2 GB
No
RAM
expandable
expandable to 4 GB
to 1 GB, for
system and
application
2
XBT GTW652
3.800
256 MB
2 GB
No
RAM
expandable
expandable to 4 GB
to 1 GB, for
system and
application
2
XBT GTW750
6.000
Multifunction, 12" screen
TFT
3
1 COM1
1 COM2
5 USB
XBT GTW652
Multifunction, 15" screen
4
TFT
1 COM1
1 COM2
5 USB
(1) Fixing kit (screw clamps), USB connectors locking device and service instructions included
with terminals. XBT setting-up documentation, in electronic format, is included with Vijeo
Designer™ configuration software, see page 3/17.
XBT GTW750
1/52
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Separate parts for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Separate parts
Description
XBT ZGMppp
Compact
Flash
memory
cards
Size - software
Compatible with
Reference
128 MB, blank
All terminals XBT except
XBT GT1ppp/GT2110
XBT ZGM128
0.050
XBT ZGM256
0.050
512 MB, blank
MPC YN0 0CFE 00N
0.050
1 GB, blank
MPC YN0 0CF1 00N
–
2 GB, blank
MPC YN0 0CF2 00N
–
4 GB, blank
MPC YN0 0CF4 00N
–
XBT GTW 450
MPC YN1 1CF1 10H
–
2 GB, with following software pre-installed:
XBT GTW 750
Windows XP® Embedded SP2 in 9 languages
(English, French, Italian, German,
Portuguese, Russian, Spanish, Swedish,
Chinese), .NET RT®, Vijeo® Citect® Web
Client and Office Readers
MPC YN52 CF2 20T
–
2 GB, with following software pre-installed:
XBT GTW 750
Windows XP Embedded SP2 in 9 languages
(English, French, Italian, German, ,
Portuguese, Russian, Spanish, Swedish,
Chinese), .NET RT, Vijeo Designer Run Time
and Office Readers
MPC YN52 CF2 20H
Includes panel mounting fixings and seals
8.4" models
MPC ST1 1NpJ 00T
MPC YK1 0MNT KIT
–
12" models
MPC ST2 1NpJ20p
MPC YK2 0MNT KIT
–
15" models
MPC ST5 2NDJ 10
MPC YK5 0MNT KIT
–
256 MB, blank
1 GB, Vijeo Designer™ RT Edition software
in 6 languages pre-installed
Maintenance
kits
Protective
sheets
(5 peel-off
sheets)
Weight
kg
2
3
–
4
–
XBT GT1105/GT1135/GT1335
XBT ZG60
–
–
XBT GT1100/GT1130
XBT ZG61
–
–
XBT GT21p0/GT2220/GT2330
XBT ZG62
0.200
–
XBT GT4230/GT43p0
XBT ZG64
0.200
–
XBT GT53p0
XBT ZG65
0.200
–
XBT GT5230/GT63p0
XBT ZG66
0.200
–
XBT GK 2pp0/GH2460
XBT ZG68
–
–
XBT GK 5330
XBT ZG69
–
XBT GT7340/XBT GTW750
MPC YK5 0SPS KIT
–
0.200
–
XBT GTW450
MPC YK1 0SPS KIT
–
–
XBT GTW652
MPC YK2 0SPS KIT
–
–
Terminals XBT GT
(number of spring clips
depending on terminal)
XBT Z3002
–
Wall mounting Fixing components for mounting terminal XBT
kit
GH on a wall
Terminal XBT GH
XBT ZGWMKT
–
Neck strap
For use with hand-held terminal XBT GH
Terminal XBT GH
XBT ZGNSTP
–
Emergency
stop button
protection
For avoiding accidental operation of the
Emergency stop button
Terminal XBT GH
XBT ZGESGD
–
Spring fixing
clips
Sold in lots
of 12
1
1/53
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Operator dialog terminals
Spare parts for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Separate components (continued)
Description
1
From XBT F032p10 to XBT GT2pp0
Mechanical adaptors for
substituting previous version From XBT G2110 to XBT GT2pp0
Magelis® range terminals
From XBT F034ppp to XBT GT53p0
From XBT G5330 to XBT GT5330
XBT ZGCOp
2
3
Details
XBT ZGUSB
Weight
kg
–
XBT ZGCO1
–
–
XBT ZGCO2
–
–
XBT ZGCO3
–
–
XBT ZGCO4
–
Remote USB port for
terminals: XBT
GT2pp0 to GT7340
GT1pp5, GKppp, GTWppp
Enables remote location of USB port on rear of
1m
terminal XBT, either on panel or enclosure door (Ø 21
mm fixing device)
XBT ZGUSB
–
Adaptor for Compact Flash
cards
Enables a PC with a PCMCIA card slot to be adapted
to take a Compact Flash card
XBT ZGADT
0.050
Spare parts
Description
Seals
4
Back-lighting lamps
USB fastening
Sold in lots of 5
For use with
–
Reference
Weight
kg
XBT GH (for junction box)
XBT ZG5H
–
XBT GT1100/GT1130/GT1105/GT1135/GT1335
XBT ZG51
0.030
XBT GT21p0/GT2220/GT2330
XBT ZG52
0.030
XBT GT4230/GT43p0
XBT ZG54
0.030
XBT GT53p0
XBT ZG55
0.030
XBT GT5230/GT63p0
XBT ZG56
0.030
XBT GT7340
XBT ZG57
0.030
XBT GK2pp0
XBT ZG58
–
XBT GK5330
XBT ZG59
–
XBT GT5230
XBT ZG43
0.100
XBT GT53p0
XBT ZG45
0.200
XBT GT53p0 PV u 3
XBT ZG45B
0.200
XBT GT63p0
XBT ZG46
0.200
XBT GT7340
XBT ZG47
0.200
XBT GT1pp0/GT2pp0/GT4pp0
XBT ZGCLP1
–
XBT GT1pp5/GT5pp0/GT6pp0/GT7pp0
XBT ZGCLP2
–
XBT GK
XBT ZGCLP3
–
Fixing kit
4 clamps and screws (max. tightening torque: 0.5 Nm).
lncluded with all XBT GT terminals
XBT ZG FIX
0.100
Extension connector
protector
XBT GT/GK except XBT GT1ppp
XBT ZGCNC
0.030
Power supply connector
Sold in lots of 5
XBT GT1ppp/GT2ppp
XBT GT4ppp
XBT GK2ppp
XBT ZGPWS1
0.030
XBT GT5ppp/6ppp/7ppp
XBT GK5ppp
XBT GTWppp
XBT ZGPWS2
–
XBT GT4ppp/5ppp/6ppp/7ppp, XBT GK5ppp
XBT ZGAUX
–
Auxiliary connector
Sheets of customizable labels XBT GK2pp0
Sold in lots of 10
XBT GK5ppp
1/54
Length Reference
XBL YGK2
0.030
XBL YGK5
–
XBT GH
XBT YGH2
–
Stylus
Sold in lots of 5
XBT GH
XBT ZGPEN
–
Emergency stop button
protector
XBT GH
XBT ZGESD
–
Hand strap
XBT GH
XBT ZGHSTP
–
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Connection accessories for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Application transfer cables - terminal to PC
Type of terminal
(terminal side connector)
XBT GT2pp0...GT7340,
XBT GT1pp5, XBT GK,
XBT GH
XBT GTW
Connector (PC side)
Type
Length Reference
(1)
USB
TTL
2m
Type
Length Reference
Printer connection cables
Type of printer
Connector (printer side)
Serial printer (2) for
25-pin female SUB-D
terminals XBT GT/GK/GTW
(except XBT GT1ppp)
RS 232C (COM1) 2.5 m
XBT ZG935
XBT Z915
Weight
kg
0.290
Weight
kg
0.200
Adaptors and isolation units for terminals XBT
Physical link
(XBT GT terminal side)
Length Reference
Adaptor for XBT
25-pin SUB-D
GT1ppp
connector
(COM1 port)
XBT GT2pp0...7340/
XBT GK (COM2 port)
RJ45 connector
0.2 m
XBT ZG939
–
Adaptors for XBT
25-pin SUB-D
GT2pp0...7340/XBT connector
GK (COM1 port)
XBT GTW (COM1
and COM2 ports)
9-pin SUB-D connector, RS
485
9-pin SUB-D connector, RS
232C
0.2 m
XBT ZG909
–
0.2 m
XBT ZG919
–
Description
Type of connector
(automation product side)
Usage
Weight
kg
Link to be isolated
Reference
2
3
These 3 adaptors are used with the connection cables to suit the application. For example, using cable XBT
Z968 with “+ (2) ”, i.e. adaptor XBT ZG909, enables connection of a Twido® controller (via its terminal port) to
an XBT GT2pp0 terminal (via its COM1 port).
Description
1
4
Weight
kg
Serial link isolation - Connection to serial port of terminal XBT
RS 232C/RS 485
XBT ZGI232
–
units for XBT
- Isolated link on 9-pin SUB-D connector (3) (COM1)
GT2pp0...7340/XBT - Unit power supply via the USB port of the
RS 485 (COM2)
XBT ZGI485
–
GK
terminal. Incorporates a USB hub
(1)Cable included (according to model) with Vijeo Designer software packages, see page 3/17.
(2)Parallel printer, see page 1/31.
(3)Male connector for XBT ZGI232, female connector for XBT ZGI485.
XBT ZGI485
1/55
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Connection accessories for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Cables for connecting XBT GT to other Schneider Electric products
Automation product Type of
type
connector
(automation
product side)
Terminal port,
Twido®, Nano™,
Modicon® TSX
8-pin female
Micro™,
mini-DIN
Modicon® Premium™
1
2
3
Protocol Type of XBT terminal,
physical link
On XBT
port
Length Reference
Uni-TE™ XBT GT1ppp, RS 485
(V1/V2),
Modbus® XBT GT2pp0...7340,
XBT GK, RS 485
XBT GT2pp0...7340,
XBT GK, RS 485
COM1
2.5 m
XBT Z9780
kg
0.180
COM2
10 m
XBT Z9782
–
COM1
2.5 m
5m
2.5 m
XBT Z968 + (2)
XBT Z9681 + (2)
XBT Z9018
XBT GTWpp,
COM1
RS 232
XBT GH (Junction box)
2.5 m
TSX PCX 1031
Modbus XBT GT1ppp,
COM1
RS 485
XBT GT2pp0...7340,
COM2
XBT GK, RS 485
XBT GT2pp0...7340,
COM1
XBT GK, RS 485
XBT GH (Junction box)
2.5 m
XBT Z9980
0.230
10 m
XBT Z9982
–
1.8 m
XBT Z938 + (2)
2.5 m
XBT Z9008
1.8 m
BMX XCA USB H018
0.230
4.5 m
BMX XCA USB H045
–
XBT GT2pp0...7340,
COM1
XBT GK, RS 485
XBT GH (Junction box)
TSX PCX 1031
Modicon® M340™
Modicon® M238™
4
RJ45
USB
Terminal XBT GT (4)
port
XBT GK/GTW
USB
Weight
0.180
0.340
0.170
–
0.230
–
Modicon Premium
25-pin
with TSX SCY 2160p female
SUB-D
Uni-TE XBT GT1ppp, RS 485 COM1
(V1/V2)
XBT GT2pp0...7340,
COM1
XBT GK, RS 485
XBT GH (Junction box)
2.5 m
XBT Z918 + (1)
0.230
2.5 m
XBT Z918 + (2)
0.230
Modicon® Quantum™ 9-pin
female
SUB-D
Modbus XBT GT1ppp, RS 232C
COM1
2.5 m
XBT Z9710 + (1)
0.210
XBT GT2pp0...7340,
COM1
XBT GK/GTW, RS 232C
XBT GH (Junction box)
2.5 m
3.7 m
XBT Z9710 + (3)
990 NAA 263 20
0.210
0.290
Advantys™ STB
Modbus XBT GT1ppp, RS 232C
2.5 m
XBT Z988 + (1)
0.220
Modicon®
Momentum™ M1
HE13
(NIM,
network
interface
module)
XBT Z9715
–
2m
STB XCA 4002
0.210
2.5 m
XBT Z988 + (3)
0.220
COM1
2.5 m
XBT Z9711 + (1)
0.210
XBT GT2pp0...7340.
COM1
XBT GK, XBT GTW RS
232C
XBT GH (Junction box)
2.5 m
XBT Z9711 + (3)
0.210
3m
2.5 m
10 m
VW3 A8 306 R30
XBT Z9980
XBT Z9982
0.060
–
–
2.5 m
XBT Z9008
XBT GT2pp0...7340,
COM1
XBT GK/GTW, RS 232C
XBT GH (Junction box)
RJ45
(port 1 of
Momentum
M1)
TeSys® U, T starters RJ45
Altivar® 31/61/71
speed drives
Altistart® 48 starters
Lexium® 05
Preventa™ XPSMC
COM1
Modbus XBT GT1ppp, RS 232C
Modbus XBT GT1ppp,
RS 485
XBT GT2pp0...7340,
XBT GK, RS 485
COM1
COM2
XBT GT2pp0...7340,
COM1
XBT GK, RS 485
XBT GH (Junction box)
–
(1)Adaptor XBT ZG939 to be used with cables with “ + (1) ” after the reference, see page 1/55.
(2)Adaptor XBT ZG909 to be used with cables with “ + (2) ” after the reference, see page 1/55.
(3)Adaptor XBT ZG919 to be used with cables with “ + (3) ” after the reference, see page 1/55.
(4)Except XBT GT1pp0.
1/56
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Connection accessories for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Cables and adaptors for connecting XBT terminals to third party PLCs
Mitsubishi (Melsec®) PLCs
Description
Driver used
Type of XBT
terminal
Type of connectors
(fitted to cable, excluding adaptor)
Connection cable, GT2pp0...7340/ 9-pin SUB-D/25-pin SUB-D
GK/
A CPU (SIO)
GH (Junction
box)
XBT ZG9772
XBT ZG9731
Physical Length Reference
link
(COM1)
RS 422
5m
XBT ZG9773
Weight
kg
–
Connection cable, GT2pp0...7340 9-pin SUB-D/9-pin SUB-D
Q Link (SIO)
/GK/GTW/
GH (Junction
box)
RS 232C 5 m
XBT ZG9772
–
Connection cable, GT2pp0...7340 9-pin SUB-D/mini-DIN
Q CPU (SIO)
/GK/GTW/
GH (Junction
box)
RS 232C 5 m
XBT ZG9774
–
Connection cable, GT2pp0...7340 9-pin SUB-D/25-pin SUB-D
A Link (SIO)
/GK/GTW/
GH (Junction
box)
RS 232C 5 m
XBT ZG9731
–
Connection cable, GT2pp0...7340 9-pin SUB-D/mini-DIN
FX (CPU)
/GK/
GH (Junction
box)
RS 422
5m
XBT ZG9775
–
RS 422
5m
XBT Z980 + (1)
GT1ppp
25-pin SUB-D/mini-DIN
1
Cable for 2 port
adaptor,
FX (CPU),
A CPU (SIO)
QnA CPU (SIO)
GT2pp0...7340 9-pin SUB-D/free wires other end
/GK/
GH (Junction
box)
RS 422
5m
XBT ZG9778 + (4)
–
Adaptor unit
FX (CPU),
A CPU (SIO)
QnA CPU (SIO)
GT2pp0...7340 2 port unit
/GK/
Screw terminals/2 x 9-pin SUB-D
GH (Junction
box)
RS 422
–
XBT ZG979
–
2
3
4
Omron (Sysmac®) PLCs
Description
Driver used
Type of XBT
terminal
Connection cables, GT1ppp
Link (SIO)
Type of connectors
(fitted to cable, excluding adaptor)
25-pin SUB-D/9-pin SUB-D
GT2pp0...7340 9-pin SUB-D/9-pin SUB-D
/GK/GTW/
9-pin SUB-D/25-pin SUB-D
GH (Junction
box)
Connection cables, GT1ppp
FINS (SIO)
25-pin SUB-D/9-pin SUB-D
GT2pp0...7340 9-pin SUB-D/9-pin SUB-D
/GK/GTW/
GH (Junction
box)
Physical Length Reference
link
(COM1)
RS 232C 2.5 m
XBT Z9740 + (1)
XBT Z9743
RS 232C 5 m
XBT ZG9740
RS 232C 5 m
XBT ZG9731
RS 232C 2.5 m
XBT Z9740 + (1)
XBT Z9743
XBT ZG9740
RS 232C 5 m
Weight
kg
0.210
–
–
–
0.210
–
–
(1)Adaptor XBT ZG939 to be used with cables with “ + (1) ” after the reference, see page 1/55.
(4)Cable XBT ZG9778 to be used with 9-pin female/female SUB-D adaptor XBT ZGCOM1.
1/57
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
References (continued)
Connection accessories for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Cables and adaptors for connecting XBT GT terminals to third party PLCs (continued)
Rockwell Automation (Allen-Bradley) PLCs
1
Description
Driver used
Connection
cables,
DF1 Full Duplex
2
3
XBT ZG9731
Connection
cables,
DH485
Type of XBT
terminal
Type of connectors
(fitted to cable, excluding adaptor)
Physical
link
(COM1)
Length Reference
GT1ppp
25-pin SUB-D/9-pin SUB-D
RS 232C
2.5 m
XBT Z9730 + (1)
25-pin SUB-D/8-pin mini-DIN
RS 232C
2.5 m
XBT Z9731 + (1)
GT2pp0...7340 9-pin SUB-D/25-pin SUB-D
/GK/GTW/
GH (Junction
box)
RS 232C
5m
XBT ZG 9731
–
GT1ppp
RS 232C
2.5 m
XBT Z9734
–
kg
XBT Z9733
25-pin SUB-D/9-pin SUB-D
Weight
0.210
–
0.210
25-pin SUB-D/8-pin mini-DIN
RS 485
5m
XBT Z9732 + (1)
–
GT2pp0...7340 25-pin SUB-D/8-pin mini-DIN
/GK/
GH (Junction
box)
RS 485
5m
XBT Z9732 + (2)
–
Type of connectors
(fitted to cable, excluding adaptor)
Physical
link
Length Reference
RJ45/9-pin SUB-D
RS 485
(COM1)
2.5 m
XBT ZG9721
–
GT2pp0...7340 RJ45/9-pin SUB-D
/GK
RS 485
(COM2)
GT2pp0...7340 9-pin SUB-D/9-pin SUB-D
/GK/GTW/
GH (Junction
box)
RS 232C
(COM1)
3m
XBT ZG9292
–
GT2pp0...7340 RJ45/free wires other end
/GK
RS 485 (4) 3 m
(COM2)
VW3 A8 306 D30
RJ45/9-pin SUB-D
RS 485 (4) 2.5 m
(COM2)
XBT ZG9721
Type of connectors
(fitted to cable, excluding adaptor)
Physical
link
Length Reference
RS 422
(COM1)
2.5 m
XBT ZG9722
RS 422
(COM1)
–
XBT ZG949 + (5)
–
RS 485
(COM2)
–
XBT ZG949 + (6)
–
Siemens (Simatic®) PLCs
Description
Driver used
4
Type of XBT
terminal
Connection cable, GT1ppp
PPI, S7 200
Connection
cables,
MPI port, S7
300/400
Weight
kg
0.150
–
Customizable cables
Description
Driver used
Universal cable,
RS 422
Type of XBT
terminal
GT2pp0...7340 9-pin SUB-D/free wires other end
/GK/
GH (Junction
box)
Universal adaptor, GT2pp0...7340 9-pin SUB-D/Screw terminal
RS 422/485
/GK/
GH (Junction 9-pin SUB-D/Screw terminal
block)
Weight
kg
0.210
(1)Adaptor XBT ZG939 to be used with cables with “ + (1) ” after the reference, see page 1/55.
(2)Adaptor XBT ZG909 to be used with cables with “ + (2) ” after the reference, see page 1/55.
(4)Non isolated RS 485 serial link, 12 Mbps (187.5 kbps with XBT GT11p0/2110).
(5)Cable to be created by user and used in conjunction with 9-pin female/female SUB-D adaptor
XBT ZGCOM1.
(6)Cable to be created by user and used in conjunction with isolation unit XBT ZGI485 and 9-pin
male/female SUB-D adaptor XBT ZGCOM2.
1/58
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Operator dialog terminals
Connection accessories for Magelis®
XBT GT/GK/GH/GTW Advanced Panels
Connecting XBT terminals via serial links and Ethernet network
Type of
bus/network
TSX SCA 62
TSX P ACC 01
Uni-Telway™
serial link
Tap-off units
Subscriber
socket
TSX SCA 62
Connection
box TSX P
ACC01
Modbus®
serial link
TSX SCA 64
Subscriber
socket TSX
SCA 64
LU9 GC3
T-connector
Ethernet TCP/IP
network
With
integrated
cable, RJ45
fitted
Hubs
RJ45
499 NEH/NOH
Switches 499
NES, 499 NMS,
499 NSS and
499 NOS
Weight
kg
0.150
1
0.240
2.5 m
XBT Z9780
0.180
2.5 m
XBT Z9018
–
3m
VW3 A8 306
0.150
1.8 m
XBT Z908 + (2)
0.240
GT1ppp (COM1)
3m
2.5 m
VW3 A8 306R30
XBT Z9980
0.060
–
GT2pp0...7340/GK
(COM1)
2.5 m
XBT Z9008
–
GT1ppp (COM1)
GT2pp0...7340/GK
(COM2)
1m
VW3 A8 306 TF10
–
GTpp30/pp40
GKpp30
GTWppp
GH (Junction box)
2m
5m
12 m
40 m
80 m
490 NTW 000 02
490 NTW 000 05
490 NTW 000 12
490 NTW 000 40
490 NTW 000 80
–
–
–
–
–
8-pin female GT1ppp (COM1)
mini-DIN
GT2pp0...7340/GK
(COM2)
GT2pp0...7340/GK
(COM1)
GH (Junction box)
15-pin female GT1ppp (COM1)
SUB-D
GT2pp0...7340/GK
(COM2)
GT2pp0...7340/GK
(COM1)
GH (Junction box)
8 port Modbus RJ45
splitter box
LU9 GC3
2 port tap-off
box
TWDXCAISO
TWDXCAT3RJ
VW3 A8 306 TF10
TWDXCAISO
Connector Type of XBT terminal Length Reference
(tap-off unit
side)
15-pin female GT1ppp (COM1)
3m
VW3 A8 306
SUB-D
GT2pp0...7340/GK
(COM2)
GT2pp0...7340/GK
1.8 m
XBT Z908 + (2)
(COM1)
GH (Junction box)
2
3
4
GH (Junction box)
Connecting XBT terminals to fieldbus
Type of
bus/network
Fipway®,
Fipio®
Modbus Plus™
Connection components
Type of XBT terminal
Reference
Weight
kg
–
USB gateway
XBT GT/GK (3)
TSXCUSBFIP
USB gateway
XBT GT/GK (3)
XBTZGUMP
–
XBT GTW
TSXCUSBMBP
–
Profibus DP
Card on Bus expansion
XBT GT/GK (3)
XBTZGPDP
–
DeviceNet™
Card on Bus expansion
XBT GT/GK (3)
XBTZGDVN
–
Modular regulated switch mode power supplies ABL 7RM (4)
Input voltage/
Output voltage
100...240/24 V
single-phase wide
range mains supply,
47...63 Hz
ABL 7RM240p
Use with
XBT
GT1100...6340
/GK/GH
GT7340/GTW
Nominal
power
30 W
Nominal
current
1.3 A
Reference
60 W
2.5 A
ABL 7RM24025
ABL 7RM2401
Weight
kg
0.182
0.255
(2)Adaptor XBT ZG909 to be used with cables with “ + (2) ” after the reference, see page 1/55.
(3)Except XBT GT1ppp.
(4)Dimensions: H x W x D = 90 x 72 x 59 mm. For further information, please refer to our “Power
supplies, splitter boxes and interfaces” catalog.
1/59
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Connections
Magelis® Advanced Panels
Wiring system
XBT GT11p5 terminals and Schneider Electric products
1
XBT ZG939
RS 232C
2
Modicon® Quantum™
XBT Z9711, RJ45
Modicon® Momentum™ M1
XBT Z988, HE 13
Advantys™ STB
XBT Z9715, HE 13
Twido®
XBT Z9780, mini-DIN
Nano™
XBT 9782, mini-DIN
XBT GT 1ppp
3
XBT Z9710, 9-way SUB-D
XBT GT 1pp5
COM1 port
RJ45
USB port
XBT GT1pp5
RS 485
XBT ZG939
XBT Z968, 8-way mini-DIN
Modicon® TSX Micro™
XBT Z9681, 8-way mini-DIN
Modicon® Premium™
XBT Z9680, 8-way mini-DIN
TSX P ACC 01
XBT Z918, 25-way SUB-D
TSX SCY2160p
XBT Z938, RJ45
VW3 A8 306 Rp0, RJ45
XBT Z9980
4
TeSys® U
Altivar® 31/61/71
Altistart® 48
Lexium® 05
LU9 GC3
XBT Z908, 15-way SUB-D
VW3 A8 306, 15-way SUB-D
TSX SCA 62/64 (box)
VW3 A8 306TF10 (T-junction)
XBT Z9982
XBT Z9980
Modicon® M340™
BMXXCAUSBH018
1/60
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Connections (continued)
Operator dialog terminals
Magelis® Advanced Panels
Wiring system
XBT GT2pp0/GT7340/GKpppp terminals and
Schneider Electric products
990 NAA 26320, 9-way SUB-D
XBT ZG919
+ XBT ZGI232
if isolation
RS 232C
Modicon® Quantum™
1
XBT Z9710, 9-way SUB-D
XBT Z9711, RJ45
Momentum™ M1
XBT Z988, HE 13
Advantys™ STB
STB XCA 4002, HE 13
Modicon® M340™
TSX PCX 1031, mini-DIN
2
Twido®
XBT Z9018, mini-DIN
COM1 port
9-way SUB-D
RS 485
XBT GT2pp0
to
XBT GK7340
XBT Z9008
XBT ZG909
XBT Z968, 8-way mini-DIN
Modicon® TSX Micro™
XBT ZG939
XBT Z968p, 8-way mini-DIN (2)
Modicon® Premium™
XBT Z9780, 8-way mini-DIN
XBT GKpppp
COM2 port
(1)
RJ45
USB port
RS 485
RS 485
Nano™
TSX P ACC 01 (box)
XBT Z9782
VW3 A8 306 Rp0, RJ45
XBT Z938, RJ45
XBT Z9980
3
4
TeSys® U
Altivar 31/61/71
®
Altistart® 48
Lexium® 05
LU9 GC3 (splitter box)
Modicon® Quantum
XBT Z918, 25-way SUB-D
TSX SCY2160p
XBT Z908, 15-way SUB-D
VW3 A8 306, 15-way SUB-D
TSX SCA 62/64
VW3 A8 306TF10 (T-junction)
XBT Z9982
XBT Z9980
Modicon® M340
BMXXCAUSBH018
(1) XBT GK USB port only
(2)p defines the length:
- 0, length 2.5 m (angled version)
- 1, length 5 m
- 6, length 16 m
- 7, length 20 m
- 8, length 25 m
1/61
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Connections (continued)
Operator dialog terminals
Magelis® Advanced Panels
Wiring system
XBT GT11p5 terminals and third party PLCs
1
XBT ZG939
RS 232C
2
XBT Z9743, 9-way SUB-D
Omron, Sysmac® FINS (SIO)
User cable
Mitsubishi, Melsec®
XBT Z9731, 8-way mini-DIN
Rockwell Micro-Logix,
DF1-Full Duplex
XBT Z9730, 9-way SUB-D
RS 485
XBT GT1ppp
Omron, Sysmac® Link (SIO)
XBT Z9733, 8-way mini-DIN
COM1 port
RJ45
3
XBT Z9740, 9-way SUB-D
Rockwell SLC5, DF1 & DH 485
XBT Z9734, 9-way SUB-D
XBT ZG939
XBT Z9732, RJ45
Rockwell Micro-Logix, DH 485
VW3 A8 306 D30, fl.leads
Siemens S7, PPI
XBT ZG9721, 9-way SUB-D
Siemens S7, PPI
4
1/62
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Connections (continued)
Magelis® Advanced Panels
Wiring system
XBT GT2pp0/GT7340/GKpppp terminals and third party PLCs
XBT ZG979, term. block
XBT ZGCOM1
XBT ZG9778, fl. leads
XBT ZG9775, 8-way mini-DIN
Mitsubishi FX CPU, A CPU,
QnA CPU, Melsec®
Mitsubishi FX CPU, Melsec
XBT ZG949, term. block
RS 422
COM1 port
9‑way SUB-D
2
XBT ZG9722, fl. leads
RS 422 serial devices
XBT ZG9773, 25-way SUB-D
Mitsubishi A CPU, Melsec
Omron CQM1, CVM1, Sysmac®
RS 232C
XBT ZG9731, 25-way SUB-D
+ XBT ZGI232
if isolation
XBT GT2pp0
to
XBT GK7340
XBT ZG919
XBT GKpppp COM2 port
RJ45
1
Mitsubishi A Link, Melsec
Rockwell, DF1-Full Duplex
3
XBT ZG9772, 9-way SUB-D
Mitsubishi Q Link, Melsec
4
XBT ZG9774, 8-way mini-DIN
Mitsubishi Q CPU, Melsec
XBT ZG9740, 9-way SUB-D
Omron CQM1, CVM1, Sysmac
XBT Z9730, 9-way SUB-D
XBT Z9731, 25-way SUB-D
RS 485
XBT Z9720, 25-way SUB-D
RS RS
485485
XBT Z9740, 9-way SUB-D
XBT Z979, 9-way SUB-D
Siemens S7, Simatic® MPI
XBT ZG9292, 9-way SUB-D
XBT ZG909
XBT Z9732, RJ45
Rockwell Micro-Logix, DH 485
XBT ZG939
XBT Z9721, 9-way SUB-D
Siemens S7, Simatic PPI
XBT ZG9721, 9-way SUB-D
Siemens S7, Simatic PPI & MPI
VW3 A8 306 D30, fl.leads
XBT ZGCOM2
XBT ZG949, term. block
RS 485 serial devices
Application transfer from XBT GT terminals to PC
XBT GT1100/1130
8-way mini-DIN
XBT GT2pp0
to
XBT GT7340
USB type A
XBT ZG915, 9-way SUB-D
XBT ZG925, type A
Serial port
USB port
XBT ZG935, type A
XBTGT1pp5
1/63
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Substitution
1
Operator dialog terminals
Magelis® Advanced Panels
Equivalent product tables for XBT F, XBT FC to XBT GT
and XBT F to XBT GK
Equivalent product table - Magelis®
XBT F 5" color touch screen terminals to XBT GT terminals
1
Old range XBT F
XBT F032110
XBT F032310
New range XBT GT
XBT GT2220
XBT GT2220
Mechanical adaptor
XBT ZGCO1
XBT ZGCO1
Equivalent product table - Magelis®
XBT F 10" color touch screen terminals to XBT GT terminals
2
Old range XBT F
XBT F034310
XBT F034110
XBT F034510
XBT F034610
New range XBT GT
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
Mechanical adaptor
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
Equivalent product table - Magelis®
XBT FC 5" terminals to XBT GT terminals
3
Old range XBT FC
XBT FC022310
New range XBT GT
XBT GT2220
Mechanical adaptor
XBT ZGCO1
Equivalent product table - Magelis®
XBT FC 10" terminals to XBT GT terminals
4
Old range XBT FC
XBT FC044310
XBT FC044510
XBT FC044610
XBT FC064310
XBT FC064510
XBT FC064610
XBT FC084310
XBT FC084510
XBT FC084610
New range XBT GT
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
XBT GT5330
Mechanical adaptor
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
XBT ZGCO3
Equivalent product table - Magelis®
XBT F 5" and 10" color keypad terminals to XBT GK terminals
Old range XBT F
New range XBT GK
XBT F011110
XBT GK2330/GK2120
XBT F011310
XBT GK2330/GK2120
XBT F023110
XBT GK5330
XBT F023310
XBT GK5330
XBT F024110
XBT GK5330
XBT F024510
XBT GK5330
XBT F024610
XBT GK5330
The dimensions of the products are identical.
1/64
Mechanical adaptor
–
–
–
–
–
–
–
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Substitution (continued)
0
Operator dialog terminals
Magelis® Advanced Panels
Equivalent product tables for XBT G to XBT GT
Equivalent product table - Magelis®
XBT G terminals to XBT GT terminals
Old range XBT G
XBT GT5330
XBT ZGCO4
XBT G2110
XBT G2120
XBT G2130
XBT G2220
XBT G2330
XBT G4320
XBT G4330
XBT G5230
XBT G5330
XBT G6330
XBT ZG MBP
New range XBT GT
Requires
Vijeo Designer u V4.3
XBT GT2110
XBT GT2120
XBT GT2130
XBT GT2220
XBT GT2330
XBT GT4330
XBT GT4330
XBT GT5230
XBT GT5330
XBT GT6330
XBT ZG UMP
1
Mechanical adaptor (1)
XBT ZGCO2
–
–
–
–
–
–
–
XBT ZGCO4
–
Modbus Plus™ network connection
Equivalent product table - Connection cables to Schneider Electric products
2
3
Summary
Old range XBT G
Type of link
COM1, RS 232C, SUB-D 25
COM1, RS 485, SUB-D 25
COM2, RS 232C, SUB-D 9
New range XBT GT2pp0...GT6330
Type of link
Cable + adaptor reference
COM1, RS 232C, SUB-D 9
Existing cable + XBT ZG919
COM2, RS 485, RJ45
Existing cable + RS 485/RS
232C converter + XBT ZG939
COM1, RS 485, SUB-D 9
Existing cable + XBT ZG909
COM2, RS 485, RJ45
Existing cable + XBT ZG939
COM1, RS 232C, SUB-D 9
Existing cable
COM2, RS 485, RJ45
Existing cable + RS 485/RS
232C converter + XBT ZG939
4
Equivalent product table - Connection cables
Old range XBT G2pp0...G6330
New range XBT GT2pp0...GT6330
Type of
Type of link
Length Reference
Type of
Type of link
Length
New reference
terminal
terminal
Cable + adaptor
Twido®, Modicon® TSX Micro™, Modicon® Premium™, 8-way female mini-DIN terminal port, Uni-TE (V1/V2), Modbus® protocol
XBT G
COM1, RS 485
2.5 m
XBT Z968
XBT GT
COM1, RS 485
2.5 m
XBT Z968 + XBT ZG909
SUB-D 25
SUB-D 9
5m
XBT Z9681
5m
XBT Z9681 + XBT ZG909
XBT G
COM2, RS 232C
2.5 m
TSX PCX 1031
XBT GT
COM1, RS 232C
2.5 m
TSX PCX 1031
SUB-D 9
SUB-D 9
XBT GT
COM2, RS 485
2.5 m
XBT Z9780
RJ45
Modicon Premium with TSX SCY 2160p, 25-pin female SUB-D connector, Uni-TE (V1/V2) protocol
XBT G
COM1, RS 485
2.5 m
XBT Z918
XBT GT
COM1, RS 485
2.5 m
XBT Z918 + XBT ZG909
SUB-D 25
SUB-D 9
Modicon® Quantum™, 9-pin male SUB-D connector, Modbus® protocol
XBT G
COM1, RS 232C
2.5 m
XBT Z9710
XBT GT
COM1, RS 232C
2.5 m
XBT Z9710 + XBT ZG919
SUB-D 25
SUB-D 9
3.7 m
990 NAA 26320
Advantys™ STB, HE13 connector (NIM), Modbus protocol
XBT G
COM2, RS 232C
2m
STB XCA 4002
XBT GT
COM1, RS 232C
2m
STB XCA 4002
SUB-D 9
SUB-D 9
Modicon® Momentum™ M1, RJ45 connector (port 1), Modbus protocol
XBT G
COM1, RS 232C
2.5 m
XBT Z9711
XBT GT
COM1, RS 232C
2.5 m
XBT Z9711 + XBT ZG919
SUB-D 25
SUB-D 9
TeSys® U starters, Altivar® 31/61/71 drives, Altistart® 48 starters, RJ45 connector, Modbus protocol
XBT G
COM1, RS 485
2.5 m
XBT Z938
XBT GT
COM1, RS 485
2.5 m
XBT Z938 + XBT Z909
SUB-D 25
SUB-D 9
XBT GT
COM2, RS 485
3m
VW3 A8 306 R30
RJ45
(1)Mechanical adaptor for mounting terminal XBT GT when replacing an XBT G terminal.
1/65
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Substitution (continued)
0
Operator dialog terminals
Magelis® Advanced Panels
Equivalent product tables for XBT G to XBT GT
Equivalent product table - Application transfer cables to PC and printer cables
1
2
3
Old range XBT G2pp0...G6330
Type of
Type of link
terminal
Application transfer cables to PC
XBT G
Mini-DIN/SUB-D 9
Mini-DIN/USB
Serial printer cable
XBT G
COM2, RS 232C
Parallel printer cable
XBT G
Centronics type,
Epson ESC/P
Length Reference
New reference
2m
2m
XBT ZG915
XBT ZG925
XBT GT
USB/USB
2m
XBT ZG935
2.5 m
XBT Z915
XBT GT
COM1, RS 232C
2.5 m
XBT Z915
XBT ZG946
XBT GT
USB,
Hewlett Packard model
Connection via USB/PIO converter
(not supplied by Schneider
Electric)
Centronics type,
Epson ESC/P
XBT Z925
XBT Z935
2m
Equivalent product table - Connection cables to third party PLCs
Mitsubishi (Melsec®) PLCs
Old range XBT G2pp0...G6330
Type of
Type of
Physical Length Substituted
terminal
connectors
link
reference
4
New range XBT GT2pp0...GT6330
Type of
Type of link
Length
terminal
Q Link (SIO) protocol
XBT G
SUB-D 25/SUB-D 9 COM1, 3 m
XBT ZG9771
RS 232C
A Link (SIO) protocol
XBT G
SUB-D 25/SUB-D 25 COM1, 5 m
XBT ZG973
RS 232C
SUB-D 25/SUB-D 9 COM1, 3 m
XBT ZG9771
RS 232C
Q FX (CPU) protocol
XBT G
SUB-D 25/SUB-D 25 COM1, 5 m
XBT ZG9770
RS 422
2 port adaptor, FX (CPU), A CPU (SIO) and QnA CPU (SIO) protocols
XBT G
SUB-D 25/free wires COM1, 5 m
XBT ZG9777
other end
RS 422
Adaptor unit, FX (CPU), A CPU (SIO) and QnA CPU (SIO) protocols
XBT G
2-port unit
COM1, –
XBT ZG979
Screw terminals/
RS 422
2 x SUB-D 9
Adaptor unit, A Link (SIO) and Q Link (SIO) protocols
XBT G
1 port unit
COM1, –
XBT ZG989
Screw terminals/
RS 422
1 x SUB-D 25
1/66
New range XBT GT2pp0...GT6330
Type of
Type of
terminal
connectors
Physical Length New reference
link
+
adaptor
XBT GT
SUB-D 9/SUB-D 9
COM1,
5m
RS 232C
XBT ZG9772
XBT GT
SUB-D 9/SUB-D 25 COM,1
5m
RS 232C
XBT ZG9731
XBT GT
SUB-D 9/mini-DIN
COM1,
RS 422
5m
XBT ZG9775
XBT GT
SUB-D 9/free wires COM1,
other end
RS 422
5m
XBT ZG9778
+ XBT ZGCOM1
XBT GT
2 port unit
Screw terminals/
2 x SUB-D 9
COM1,
RS 422
–
XBT ZG979
XBT GT
–
–
–
–
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Substitution (continued)
0
Operator dialog terminals
Magelis® Advanced Panels
Equivalent product tables for XBT G to XBT GT
Equivalent product table - Connection cables to third party PLCs (continued)
Omron (Sysmac®) PLCs
Old range XBT G2pp0...G6330
Type of
Type of
Physical Length
terminal
connectors
link
Link (SIO) protocol
XBT G
SUB-D 9/SUB-D 9 COM2, 5 m
RS 232C
SUB-D 25/SUB-D 25 COM1, 5 m
RS 232C
FINS (SIO) protocol
XBT G
SUB-D 25/SUB-D 9 COM1, 2.5 m
RS 232C
Substituted
reference
New range XBT GT2pp0...GT6330
Type of
Type of
terminal
connectors
XBT ZG9740
XBT GT
XBT ZG973
XBT Z9740
XBT GT
1
Physical Length New reference
link
COM1,
5m
RS 232C
SUB-D 9/SUB-D 25 COM1,
5m
RS 232C
XBT ZG9740
SUB-D 9/SUB-D 9
XBT ZG9740
SUB-D 9/SUB-D 9
COM1,
5m
RS 232C
XBT ZG 9731
2
Rockwell Automation (Allen-Bradley) PLCs
Old range XBT G2pp0...G6330
Type of
Type of
Physical Length Substituted
terminal
connectors
link
reference
DF1 Full Duplex protocol
XBT G
SUB-D 25/SUB-D 25 COM1, 5 m
RS 232C
XBT ZG973
New range XBT GT2pp0...GT6330
Type of
Type of
terminal
connectors
XBT GT
3
Physical Length New reference
link
SUB-D 9/SUB-D 25 COM1,
5m
RS 232C
XBT ZG 9731
4
Siemens (Simatic®) PLCs
Old range XBT G2pp0...G6330
Type of
Type of
Physical Length Substituted
terminal
connectors
link
reference
MPI (S7-300/400) protocol
XBT G
SUB-D 25/SUB-D 9 COM1, 3 m
XBT ZG929
RS 232C
New range XBT GT2pp0...GT6330
Type of
Type of
terminal
connectors
XBT GT
SUB-D 9/SUB-D 9
RJ45/SUB-D 9
Adaptor unit, RK512/3964F (S7-300/400) protocol
XBT G
1 port unit
COM1, 3 m
XBT ZG989
Screw terminals/
RS 422
1 x SUB-D 25
XBT GT
–
Physical Length New reference
link
COM1,
3m
RS 232C
COM2,
2.5 m
RS 485
XBT ZG9292
–
–
–
XBT ZG9721
1/67
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Dimensions,
mounting
Magelis® XBT N/R/RT Small Panels
Magelis® XBT GT Advanced Panels
Dimensions
XBT RT
b
b
6
a
a
132
132
132
137
137
137
XBT N200/N400
XBT N401/N410
XBT NU400
XBT R400
XBT R410/R411
XBT RT
6
a
a1 (1)
–
–
–
160
160
160
b
74
74
74
118
118
118
b1 (1)
104
104
104
146
146
146
P1 (2)
78
–
–
78
–
79
a
P2 (3)
–
–
104
–
–
104
P3 (4)
–
58
–
–
58
58
P4 (5)
–
104
–
–
104
104
(1)With fixing clips (included with product).
(2)P1: depth with RJ45 cable XBT Z9780 (for Twido®, TSX Micro™ and Premium™).
(3)P2: depth with 25-pin SUB-D cable XBT Z938 (for TeSys® model U and variable speed drives Altivar® 61/71).
(4)P3: depth with 25-pin SUB-D elbowed connector XBT Z9680 (for Twido, TSX Micro and Premium) or XBT Z998 (for Advantys™ STB).
(5)P4: depth with 25-pin SUB-D cable XBT Z68/Z9681 (for Twido, TSX Micro and Premium).
Dimensions
XBT GT2110
XBT GT2120/GT2130/GT2220/GT2330
60
a
118
204
135
123
92
104
155,5
167,5
5
130
5
XBT GT4230/GT4330/GT4340
59,5
XBT GT1100/GT1130/GT1335
170
4
6
159
3
b
2
P
XBT R
P
XBT N
P
1
5
215
XBT GT1100/1130: a = 41; XBT GT1335: a = 40
XBT GT 7340
258,5
270,5
5
5
Mounting
Graphic terminals
G
XBT N
XBT R
XBT RT
XBT GT1100/GT1130/GT1335
XBT GT2110/GT2120/GT2130/GT2220/GT2330
XBT GT4230/GT4330/GT4340
XBT GT5230/GT6330/GT6340
XBT GT5330/GT5340
XBT GT7340
H
r
T = panel thickness
XBT N references:
page 1/14
1/68
XBT R references:
page 1/16
294
282
200,5
239
227
313
5
383
212,5
301
60
57
XBT GT 5330/GT 5340
56
XBT GT 5230 and XBT GT 6330/GT 6340
XBT RT references:
page 1/20
395
Cut-out for flush mounting
H (± 0.4 mm) G (± 0.5 mm) r
63
119.4
1.5 max.
105.2
119.6
1.5 max.
105.2
119.6
1.5 max.
92.5 (+1/-0) 118 (+1/-0) 3 max.
123.5 (+1/-0) 156 (+1/-0) 3 max.
159.5 (+1/-0) 204.5 (+1/-0) 3 max.
227.5 (+1/-0) 301.5 (+1/-0) 3 max.
201 (+1/-0) 259 (+1/-0) 3 max.
282.5 (+1/-0) 383.5 (+1/-0) 3 max.
T
1.5...6
1.5...6
1.5...6
1.6...5
1.6...5
1.6...10
1.6...10
1.6...10
1.6...10
XBT GT references:
page 1/50
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Operator dialog terminals
Dimensions,
mounting
Magelis® XBT GK, XBT GH, XBT GTW
Advanced Panels
Dimensions
XBT GH 2460
XBT GK2120/GK2330/GK5330
1
5
107,5
87,1
6,7
XBT GTW 450
224
177
174
a
c
b
2
65
230
3
XBT GK2120/2330: a = 265, b = 60.3, c = 220.3
XBT GK5330: a = 332, b = 72.7, c = 296
XBT GTW 652
XBT GTW 750
5
5
60
294
239
4
313
60
395
Mounting
Graphic terminals
G
XBT GK2120/GK2330
XBT GK5330
XBT GTW 450
XBT GTW 652
XBT GTW 750
H
r
Cut-out for flush mounting
H
G
r
243 (+/-0.4) 209 (+/-0.4) 3 max.
309 (+/-0.4) 285 (+/-0.4) 3 max.
165.5 (+1/-0) 218.5 (+1/-0) 3 < r < 4
227.5 (+1/-0) 301.5 (+1/-0) 3 < r < 4
282.5 (+1/-0) 383.5 (+1/-0) 3 < r < 4
T
1.6...10
1.6...10
1.6...10
1.6...10
1.6...10
T = panel thickness
XBT GK/GH references:
page 1/51
XBT GTW references:
page 1/52
1/69
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
1/70
2/0
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contents chapter 2
Industrial PCs
2.1 - Magelis® Smart Embedded Panels and
Magelis® Compact iPC PC Panels
Selection guide �������������������������������������������������������������������������������������������������� 2/2
1
b Magelis Smart Embedded Panels 8.4", 12", 15" . . . . . . . . . . . . . . . . . . . . . . . . 2/4
b Magelis Compact iPC PC Panels 8.4", 12", 15" . . . . . . . . . . . . . . . . . . . . . . . . 2/12
b Equivalent product tables for Magelis Smart Embedded Panels . . . . . . . . . . . 2/22
b Equivalent product tables for Magelis Compact iPC PC Panels. . . . . . . . . . . . 2/23
2.2 - Magelis® Smart BOX, Magelis® Compact PC BOX,
Magelis® Flex PC BOX and Front Panels
Selection guide ������������������������������������������������������������������������������������������������ 2/24
2
3
b Magelis Smart BOX���������������������������������������������������������������������������������������� 2/39
b Magelis Compact PC BOX������������������������������������������������������������������������������ 2/40
b Magelis Flex PC BOX������������������������������������������������������������������������������������� 2/41
b Front panels for Magelis Flex PC BOX������������������������������������������������������������ 2/43
4
b Separate parts for Magelis Flex PC BOX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/44
b Separate parts for all Magelis iPC ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2/45
b Dimensions, mounting������������������������������������������������������������������������������������ 2/46
b Connections���������������������������������������������������������������������������������������������������� 2/50
2.3 - Magelis® iDisplay flat screens
Selection guide ������������������������������������������������������������������������������������������������ 2/52
b Magelis iDisplay flat screens�������������������������������������������������������������������������� 2/54
2.4 - Magelis® HMI Controller
b Magelis XBT GC Compact HMI Controller������������������������������������������������������ 2/55
2/1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Selection guide
Magelis® Smart Embedded Panels and
Magelis® Compact iPC PC Panels
Applications
Embedded Panels
Model
Magelis® Smart panels
1
2
3
4
8.4" screen
SVGA (800 x 600)
Data entry via touch screen
12" screen
XGA (1024 x 768)
12" screen
SVGA (800 x 60)
Data entry via touch screen
15" screen
XGA (1024 x 768)
Data entry via touch screen
p
Model
CPU
p
p
Magelis Smart panels
Processor
Intel® Celeron® M 600 MHz
Intel Celeron M 1 GHz
Intel Celeron M 600 MHz
Storage
Compact Flash, 1 GB
expandable to 4 GB
Compact Flash, 2 GB
expandable to 4 GB
Compact Flas, 2 GB
expandable to 4 GB
RAM
256 MB expandable to 1024 MB 512 MB expandable to 1024 MB 256 MB expandable to 1024 MB
DVD-ROM drive
–
Floppy disk drive
–
Expansion slots available
–
1 PCMCIA slot
type II
Ethernet TCP/IP network
I/O ports
2 RJ45 ports:
1 x 10/100/1000BASE-T
1 x 10/100BASE-T
On front panel
–
1 x USB 2.0
Other
4 x USB 2.0,
1 x COM1, 1 x COM2
1 x audio
4 x USB 2.0,
1 x COM1,
1 x audio,
1 x RAS
4 x USB 2.0,
1 x COM1, 1 x COM2,
1 x audio,
1 x RAS
MPC ST2 1NAJ 20T (1)
MPC ST2 1NDJ 20T
(1)
MPC ST5 2NAJ 20T
MPC ST5 2NDJ 20T
MPC ST5 2NAJ 20H (3)
Windows XP® Embedded SP2
Operating system
General Purpose
(Hard Disk)
Client Edition
a 100...240 V
HMI Edition, Vijeo
Designer™ Run Time
a 100...240 V
c 24 V
Heavy Duty (Flash Client Edition
Disk)
HMI Edition, Vijeo
Designer Run Time
Vijeo Citect Bundle
Heavy Duty
(Compact Flash)
Client Edition
c 24 V
a 100...240 V
a 100...240 V
a 100...240 V
c 24 V
HMI Edition (1), Vijeo
Designer Run Time
Page(s)
1 PCMCIA slot
1 x type III or 2 x type I
a 100...240 V
MPC ST1 1NAJ 00T
MPC ST1 1NDJ 00T
MPC ST1 1NAJ 00H (3)
c 24 V (2)
2/9
(1) HMI Edition with license VJDSNRTMPC (sold separately).
(2) The HMI Edition, Vijeo Designer Run Time , c 24 V version is covered by reference XBT
GTW, see page 1/52.
(3) HMI Runtime Editions will soon be replaced by the client edition + VJDSNRTMPC.
For example, MPCST52NAJ20H will become MPCST52NAJ20T + VJDSNRTMPC.
2/2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
0
PC Panels
1
2
Magelis® Compact iPC
p
p
3
p
4
Magelis Compact iPC
Intel® Celeron® M 1 GHz
Intel Celeron M 1.5 GHz
Pentium® M 1.6 GHz
Hard disk u 80 GB
Hard disk u 160 GB or Flash Disk u 15 GB
Hard disk u 80 GB or Flash Disk u 15 GB
512 MB expandable to 1024 MB
512 MB expandable to 2 GB
–
–
Yes
–
–
Yes
1 PCI bus slot
1 PCI bus slot
1 PCMCIA slot
1 x type III/type I
1 PCI bus slot
1 PCMCIA slot
1 x type III or 2 x type II
2 RJ45 ports:
1 x 10/100/1000BASE-T
1 x 10/100BASE-T
–
1 x USB 2.0
4 x USB 2.0,
1 x COM1, 1 x COM2,
1 x audio
4 x USB 2.0,
1 x COM1,
1 x audio,
1 x RAS
4 x USB 2.0,
1 x COM1, 1 x COM2, 1 x COM3, 1 x COM4,
3 x audio,
1 x RAS
MPC KT1 2NAX 00N
MPC KT2 2NAX 20N (1)
MPC KT1 2NAX 00H (3)
(1)
MPC KT5 5NAX 20N
MPC KT5 5NDX 20N
MPC KT5 5NAX 20H (3)
MPC KT5 5NDX 20H (3)
MPC KT5 5MAX 20N
MPC KT5 5MAX 20H (3)
Windows XP® Pro
MPC KT2 2MAX 20N (1)
(1)
MPC KT2 2MAX 20L/V
2/19 and 2/20
2/3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Introduction
Magelis® Smart Embedded Panels
Introduction
Magelis® Smart embedded panels combine all the benefits of an industrial PC
with those of an operator terminal for client applications developed in the Windows®
operating system. Simple and user-friendly, it offers the flexibility of Windows XP®
Embedded for standard client applications such as Internet Explorer®, Outlook®
Express, Microsoft Office® readers, etc. As an operator terminal, Magelis Smart is, of
course, open to HMI Vijeo Designer™ applications as well as to Vijeo® Citect® Web
Client SCADA client applications.
1
2
Complementing the Magelis Compact iPC and PC BOX ranges, this renewed range
offers “All in One” products that meet the needs of machine manufacturers, system
integrators and users. They are more compact, very easy to install/set-up and open
to Web technologies.
With identical dimensions and same screen size as the Magelis XBT GT terminals,
and equally compatible with Vijeo Designer™ software, Magelis Smart (and Compact
iPC) industrial PCs are the natural extension to the earlier terminals. They provide
optimal flexibility for all operator dialog applications, from the simplest to the most
advanced.
3
Magelis® Smart industrial PCs
Magelis Smart industrial PCs are built around an IP 65 front panel with an 8.4", 12"
or 15" color TFT LCD screen and a high definition analog touch panel.
They have two built-in Ethernet TCP/IP ports:
v 1 x 10/100/1000BASE-T
v 1 x 10/100BASE-T
These two ports make the terminal perfectly suited for use with Transparent Ready®
architectures and equipment (combination of Web and Ethernet TCP/IP
technologies).
4
Magelis Smart is available in two pre-installed software configurations, supplied on a
1 GB or 2 GB Compact Flash memory card.
b Magelis® Smart Client Edition enables the viewing of Web pages, either locally
or remotely, with the same level of ease. A “ready to use” thin client station, Magelis
Smart integrates the following software components:
v Internet Explorer® browser and Outlook® Express message client,
v JVM® (Java® Virtual Machine),
v Windows® Terminal Services Client for client/server architectures,
v Office Reader for access to device documentation (.pdf, .doc, .xls and .ppt
documents).
v Vijeo® Citect® Web Client for Magelis Smart 12" and 15".
These components can be used for the system diagnostics, viewing and setting of
Schneider Electric Transparent Ready® products, as well as for access to
FactoryCast™ services (see “Transparent Ready, embedded Web servers).
Magelis Smart 12" becomes HMI Edition following activation of a license (ref.
VJDSNRTMPC), which is sold separately (one license per station).
b Magelis® Smart Edition HMI utilizes Vijeo Designer™ Run Time, as well as
offering the same functions as the Client Edition and same readiness for use after
initial start-up. It also features Vijeo Designer Run Time control software.
Magelis Smart is based on standard Windows XP Embedded SP2 technologies.
As well as built-in Ethernet TCP/IP ports, Magelis Smart also has a PCMCIA card
slot that can be used for network access (Modbus®, Modbus Plus™, Fipway®, etc.).
The Magelis Smart has particularly generous USB connectivity capabilities, featuring
4 or 5 (1) USB ports, depending on the model.
With ultra-slim (depths of 60 and 65 mm), Magelis Smart is particularly robust due to
a construction that does not include any vulnerable components (hard disk, fan,
CD-ROM drive, etc.). Windows XP Embedded and the component software tools are
pre-loaded onto a “ready to use” Compact Flash memory.
(1)4 + 1 on front panel.
Architecture:
page 2/5
2/4
Description:
pages 2/6 to 2/7
Specifications:
page 2/8
References:
pages 2/9 to 2/10
Dimensions:
page 2/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Architecture
Magelis® Smart Embedded Panels
Architecture examples
Connections to Vijeo Citect architectures
Browser
Magelis®
Smart
JVM
Vijeo® Citect®
Server
Windows XP®
Embedded
Ethernet TCP/IP
Premium™
Premium™
Quantum™
Advantys™ STB
Advantys STB
HMI applications in traditional architectures (Fipway®, Modbus Plus™)
Magelis®
Smart
Vijeo
Designer™
Browser
JVM
Windows XP®
Embedded
Premium™
Quantum™
Momentum™
Uni-Telway™
OR
Modbus®
Premium
Modicon® M340™
With its double integrated Ethernet port, Magelis®
Smart embedded panels can be integrated into “full
Ethernet” architectures, such as Transparent Ready®.
Transparent Ready devices with this type of
architecture enable transparent communication on the
Ethernet TCP/IP network.
Communication services and Web services assure the
sharing and distribution of data between levels 1, 2 and
3 of the Transparent Ready architecture.
Used as a Client station, Magelis Smart makes it easier
to implement Web Client solutions for:
b Base servers embedded in field devices (Advantys™
STB/Momentum™ distributed I/O, Altivar® 71/38/58
starters, OSItrack™ identification systems, etc.)
b FactoryCast™ Web servers embedded in Modicon®
PLCs (TSX Micro™, Premium™ and Quantum™) or the
FactoryCast gateway.
The following services are available as standard
(without the need for additional programming): alarm
management, synoptic view management and Web
home pages created by the user.
b FactoryCast HMI Web servers embedded in
Modicon Premium and Quantum PLCs also provide
basic data management services, automatic e-mail
sending triggered by specific process events and
arithmetic and logic calculations for data
preprocessing.
b Web Client Vijeo® Citect®: With the pre-installed
Vijeo Citect Web Client software and by using Internet
Explorer®, Magelis Smart 12" and 15" are web clients of
a Vijeo Citect server. The Web Client license must be
activated on the Vijeo Citect server.
1
2
3
4
The combined offer comprised of Smart industrial PC
and pre-installed Vijeo Designer™ control software
allows them to be used in mono-network architectures
such as Uni-Telway™/Modbus® or Fipway®/Modbus
Plus™. For Uni-Telway, an RS 485 TSX SCP 114 card
(1) needs to be inserted into a PCMCIA slot.
For a Modbus link, one of the built-in RS 232C COM
ports is used.
For Fipway or Modbus Plus, network interfaces need to
be added:
b Fipway network with the PCMCIA TSX FPP 20 (1) or
TSX CUSB FIP card. (1).
b Modbus Plus network with the PCMCIA card TSX
MBP 100 or the PCI bus card 416 NHM 300 30.
The built-in Ethernet TCP/IP port allows Modicon® PLC
stations to be connected to levels 2 and 3 of
communication architectures, if required.
Ready to use, Magelis Smart 8.4" MPC ST1 1NAJ 00H
and Magelis Smart 15" MPC ST5 2NAJ 20H (page 2/9)
can be used with these HMI applications without the
addition of separate components.
Magelis Smart 12" MPC ST2 1NpJ 20T becomes HMI
Edition following activation of a license (ref.
VJDSNRTMPC), which is sold separately (one license
per station).
(1)Requires the “X-Way drivers” CD-ROM, TLX CD DRV20M.
Introduction:
page 2/4
Description:
pages 2/6 to 2/7
Specifications:
page 2/8
References:
pages 2/9 to 2/10
Dimensions:
page 2/11
2/5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Description
Magelis® Smart Embedded Panels
Magelis® Smart Embedded Panels
1
1
8.4" touch screen front panel MPC ST1 1NpJ 00p
2
The touch screen front panel of the industrial PC MPC ST1 1NpJ 00p includes:
1 8.4" SVGA active matrix color TFT LCD screen (maximum display area 800 x 600
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
3
2
Lower and left-hand sides, 8.4"
1
6 5
3
4
3
Expansion slots and connection elements are accessible from the rear of the PC,
with the following elements located on the lower and left-hand sides:
1 Removable screw terminal block for connecting c 24 V power supply.
2 Slot for the Compact Flash memory card containing the operating system and
integrated software.
3 Two 9-pin male SUB-D connectors marked COM1 and COM2 for the RS 232
serial link.
4 Four USB 2.0 ports.
5 Two RJ45 connectors for Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
6 Mini-jack connector for loudspeaker.
4
2
Note: AC versions have an On/Off switch.
12" touch screen front panel MPC ST2 1NpJ 20T
The touch screen front panel of the industrial PC MPC ST2 1NpJ 20T includes:
1 12" SVGA active matrix color TFT LCD screen (maximum display area 800 x 600
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 2 lamps marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
4 Dust and moisture protected USB port.
1
2
3
4
Lower and left-hand sides, 12"
1
2
3
8 7 5
1
Expansion slots and connection elements are accessible from the rear of the PC,
with the following elements located on the lower and left-hand sides:
1 Removable screw terminal block for connecting AC supply.
2 Slot for the Compact Flash memory card containing the operating system and
integrated software.
3 One 9-pin male SUB-D connector marked COM1 for the RS 232 serial link.
4 Four USB 2.0 ports.
5 Two RJ45 connectors for Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
6 Slot for 1 additional type II PCMCIA card.
7 Mini-jack connector for loudspeaker.
8 RAS connector.
Note: AC versions have an On/Off switch.
Introduction:
page 2/4
2/6
4
6
Architecture:
page 2/5
4
Specifications:
page 2/8
References:
pages 2/9 to 2/10
Dimensions:
page 2/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Description (continued)
Industrial PCs
Magelis® Smart Embedded Panels
15" touch screen front panel MPC ST5 2NpJ 20p
1
2
3
4
The touch screen front panel of the Magelis® industrial PC MPC ST5 2NpJ 20p
features:
1 15" XGA active matrix color TFT LCD screen (maximum display area 1024 x 768
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing Compact Flash memory, etc.).
4 Dust and moisture protected USB port.
1
2
Lower and left-hand sides, 15"
1
3 8
2
6
4
7
5
Expansion slots and connection elements are accessible from the rear of the PC,
with the following elements located on the lower and left-hand sides:
1 Removable screw terminal block for connecting c 24 V power supply.
2 Slot for the Compact Flash memory card containing the operating system and
integrated software.
3 25-pin female SUB-D connector marked RAS for diagnostics.
4 Two 9-pin male SUB-D connectors marked COM1 and COM2 for the RS 232
serial link.
5 Four USB 2.0 ports.
6 Two RJ45 connectors for Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
7 Slot for 2 additional PCMCIA cards.
8 Mini-jack connector for loudspeaker.
3
4
Note: AC versions have an On/Off switch.
Introduction:
page 2/4
Architecture:
page 2/5
Specifications:
page 2/8
References:
pages 2/9 to 2/10
Dimensions:
page 2/11
2/7
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Specifications
Magelis® Smart Embedded Panels
Specifications
1
Front panel characteristics
Touch screen
2
3
Smart 8.4"
Smart 12"
Smart 15"
MPC ST1 1NpJ 00p
MPC ST2 1NpJ 20T
MPC ST5 2NpJ 20p
8.4" SVGA active matrix color 12" SVGA active matrix color
15" XGA active matrix color
TFT LCD
TFT LCD
TFT LCD
800 x 600
1024 x 768
262144
16 777 216
u 250 cd/m2, adjustable
u 200 cd/m2, adjustable
Horizontal 160°, vertical 160°
Analog resistive, 1 million cycles
ON LED: PC switched ON - DISK LED: accessing Compact Flash system card
–
1 USB port, protected by IP 65 cover
Aluminum alloy with IP 65 membrane on treated steel frame
Polyethylene sheet
IP 65
IP 65 (when USB port on front IP 65, Nema® 4 (when USB
port on front panel not in use)
panel not in use)
Type
Type
Definition
Number of colors
Brightness
Optimum viewing angle
Touch panel
Front panel
Signalling
I/O ports
Material
Screen protection
Degree of protection
CPU characteristics
Type
Processor
Storage
4
Internal hard disk
Compact Flash card
RAM (1 memory slot)
MB
CD-ROM drive
Floppy disk drive
Expansion slots PCMCIA cards
PCI port
Built-in I/O ports Ethernet TCP/IP port
USB ports
Serial port COM1
Serial port COM2
Audio
PS/2 keyboard port
PS/2 pointing device port
Operating system
Pre-installed software
Power supply
Voltage
Frequency
Micro-breaks
Consumption
Material
Mounting
Environment
Certifications
Immunity to interference
Temperature
Operation
Storage
Relative humidity
Operating altitude
Storage altitude
Vibration resistance
Introduction:
page 2/4
2/8
Architecture:
page 2/5
Smart 8.4"
MPC ST1 1NpJ 00p
Intel® Celeron® M 600 MHz
–
1 primary slot with a 1 GB min.
card, expandable to 4 GB,
loaded with the OS and
software + 1 extra secondary
slot
SDRAM, 256 minimum,
expandable to 1024
–
–
–
Smart 12"
Smart 15"
MPC ST2 1NpJ 20T
MPC ST5 2NpJ 20p
Intel Celeron M 1 GHz
Intel Celeron M 600 MHz
–
–
1 slot with a 2 GB minimum card, expandable to 4 GB, loaded
with the OS and software
SDRAM, 512,
SDRAM, 256 minimum,
expandable to 1024
expandable to 1024
–
–
–
–
1 slot (taking a maximum of
1 slot (taking a maximum of 1 x
1 x type II card)
type III card or 2 x type I cards)
–
–
–
2 RJ45 ports, links: 1 x 10/100/1000BASE-T and 1 x 10/100BASE-T
4 USB 2.0 ports
1 RS 232C link (9-pin male SUB-D connector)
1 RS 232C link (9-pin male
–
1 RS 232C link (9-pin male
SUB-D connector)
SUB-D connector)
1 mini-jack LINE output
–
–
Windows XP® Embedded SP2 installed (1)
Internet Explorer® (1)
Adobe® Acrobat® Reader, Microsoft® Word/Excel®/PowerPoint® reader (1)
Vijeo Designer™ Run Time (1) (2)
–
Vijeo® Citect® Web Client
–
Framework .NET
c 24 V
c 24 V
c 24 V
a 100 to 240 V with external
a 100 to 240 V (voltage limits a 100 to 240 V
AC power supply
85 to 265 V), conforming to EN
61131-2
Hz
–
50/60 (frequency limits 47/63), –
conforming to EN 61131-2
ms
5
5 (c)
5
10 (a)
40 W max.
40 W max. (c)
90 W max.
95 VA max. (a)
Treated steel
On panel or enclosure door (8 fixing bolts included)
UL 508, CSA 142, IEC 61131-2
–
UL 1604 (HazLoc Class 1 Div 2)
(DC version only)
High frequency interference, conforming to IEC 61131-2, EN 61000-6-2, FCC (Class A)
Electromagnetic emissions, EN 55011 (Group 1, Class A), EN 61000-3-2, EN 61000-3-3
°C
0 to + 50
°C
- 20 to + 60
- 10 to + 60
- 20 to + 60
%
10 to 85
m
0 to 3000 max.
m
0 to 12 000 max.
9.8 at 10 to 25 Hz/3 axes for 30 minutes
m/s2
(1)Installed in Compact Flash memory.
(2) See references on page 2/9.
Description:
References:
Dimensions:
pages 2/6 to 2/7
pages 2/9 to 2/10
page 2/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
References
Magelis® Smart Embedded Panels
References
Magelis® Smart
Magelis® Smart industrial PCs are “rugged” PCs that do not include components
likely to impair reliability (hard disk, CD-ROM drive, etc). They are fitted with an 8.4",
12" or 15" active matrix back-lit color TFT LCD touch screen.
b The 8.4" model MPC ST1 1NDJ 00T has a c 24 V power supply. For use on AC it
requires an external AC power supply.
Models MPC ST1 1NAJ 00p include an external AC power supply for mounting in
the back of the cabinet.
b The 12" models MPC ST2 1NpJ 20T and 15" models MPC ST5 2NpJ 20p are
available in c 24 V and a 100 to 240 V versions.
Magelis Smart industrial PCs feature the Windows XP® Embedded SP2 operating
system and two “ready to use” editions:
b Client Edition: MPC STp pNpJ p0T, with the following application software
pre-installed on Compact Flash memory card:
v Internet Explorer® for browsing the Web (Internet/Intranet),
v Windows® Terminal Services Client for client/server architectures,
vReaders for Microsoft® Word (.doc), Excel® (.xls), PowerPoint® (.ppt) and
Acrobat® (.pdf) files.
b HMI Edition - Vijeo Designer RT: MPC STp pNpJ p0p, with the software listed
above pre-installed on Compact Flash card, plus:
v Vijeo Designer™ Run Time software.
Smart - 8.4" Heavy Duty screen
With 1 GB Compact Flash
Supply voltage
c 24 V
a 100 to 240 V
MPC ST1 1NpJ 00p
RAM Processor
Expansion
slots available
Celeron® M 600 MHz –
256 MB expandable
to 1024 MB
Celeron M 600 MHz
256 MB expandable
to 1024 MB
Edition
Reference
Client Edition
MPC ST1 1NDJ 00T
Weight
kg
3.500
Client Edition
MPC ST1 1NAJ 00T
3.500
HMI Edition
MPC ST1 1NAJ 00H (2)
- Vijeo Designer™ RT
1
2
3
4
3.500
Smart - 12" Heavy Duty screen
With 2 GB Compact Flash
Supply voltage
c 24 V
a 100 to 240 V
MPC ST2 1NAJ 10p
RAM Processor
Expansion
slots available
1 PCMCIA
Celeron M 1 GHz
512 MB, expandable
to 1024 MB
Celeron M 1 GHz 1 PCMCIA
512 MB, expandable
to 1024 MB
Edition
Reference
Client Edition (1)
MPC ST2 1NDJ 20T
Weight
kg
3.800
Client Edition (1)
MPC ST2 1NAJ 20T
3.800
Edition
Reference
Client Edition
MPC ST5 2NDJ 20T
Weight
kg
6.000
Client Edition
MPC ST5 2NAJ 20T
6.000
HMI Edition
Vijeo Designer RT
MPC ST5 2NAJ 20H (2)
6.000
Smart - 15" Heavy Duty screen
With 2 GB Compact Flash
Supply voltage
c 24 V
a 100 to 240 V
RAM Processor
Expansion
slots available
Celeron M 600 MHz 2 PCMCIA
256 MB minimum,
expandable to
1024 MB
Celeron M 600 MHz 2 PCMCIA
256 MB minimum,
expandable to
1024 MB
MPC ST5 2NpJ 20p
(1) HMI Edition version following activation of a Magelis iPC Runtime with Vijeo Designer V5.1
minimum license.
(3) HMI Runtime Editions will soon be replaced by the client edition + VJDSNRTMPC.
For example, MPCST52NAJ20H will become MPCST52NAJ20T + VJDSNRTMPC.
Introduction:
page 2/4
Architecture:
page 2/5
Description:
pages 2/6 to 2/7
Specifications:
page 2/8
Dimensions:
page 2/11
2/9
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Industrial PCs
Magelis® Smart Embedded Panels
Separate components for Smart
Description
1
RAM expansion
2
Size - software
Compatible with
Reference
512 MB
8.4" models
MPC ST1 1NpJ 00p
MPC YK0 5RAM 512
Weight
kg
–
12" models
MPC ST2 1NpJ 20p
MPC YK0 5RAM 512
–
15" models
MPC ST5 2NpJ 20p
MPC YK0 5RAM 512
–
8.4" models
MPC ST1 1NpJ 00p
MPC YK2 2RA1 024
–
12" models
MPC ST2 1NpJ 20p
MPC YK2 2RA1 024
–
15" models
MPC ST5 2NpJ 20p
MPC YK2 2RA1 024
–
All Smart models
1024 MB
Compact Flash
memory cards
3
XBT ZGM128
0.050
256 MB, blank
XBT ZGM256
0.050
512 MB, blank
MPC YN0 0CFE 00N
0.050
1 GB, blank
MPC YN0 0CF1 00N
–
2 GB, blank
MPC YN0 0CF2 00N
–
128 MB, blank
MPC YN0 0CF4 00N
–
1 GB, Client Edition software
pre-installed
8.4" models
MPC ST1 1NpJ 00p
MPC YN1 1CF1 10T
–
1 GB, HMI Edition Vijeo Designer™ RT
software pre-installed
8.4" models
MPC ST1 1NpJ 00p
MPC YN1 1CF1 10H (1)
–
2 GB, with pre-installed software:
Windows XP® Embedded SP2 in 9
languages (English, French, German,
Italian, Portuguese, Russian, Spanish,
Swedish and Chinese), Framework
.NET® RT, Web Application and Vijeo
Designer™ Run Time
8.4" models
MPC ST1 1NpJ 00p
MPC YN1 1CF2 10H (1)
–
2 GB, Client Edition, with pre-installed 15" models
software: Windows XP Embedded SP2 MPC ST5 2NpJ 20p
in 9 languages (English, French,
German, Italian, Portuguese, Russian,
Spanish, Swedish and Chinese),
Framework .NET RT, Vijeo® Citect® Web
Client, Office Readers
MPC YN5 2CF2 20T
–
2 GB, Client Edition, with pre-installed 15" models
software: Windows XP Embedded SP2 MPC ST5 2NpJ 20p
in 9 languages (English, French,
German, Italian, Portuguese, Russian,
Spanish, Swedish and Chinese),
Framework .NET RT, Vijeo Citect Web
Client, Vijeo Designer Run Time, Office
Readers
MPC YN5 2CF2 20H (1)
–
4 GB, blank
4
PCMCIA adaptor for
Compact Flash card
Enables a Smart industrial PC to
receive the 2nd Compact Flash card
required by Vijeo Designer™ at the
PCMCIA slot
All Smart models.
All Compact Flash
memory cards
XBT ZGADT
Maintenance kits
Includes panel mounting fixings and
seals
8.4" models
MPC ST1 1NpJ 00T
MPC YK1 0MNT KIT
–
12" models
MPC ST2 1NpJ 20p
MPC YK2 0MNT KIT
–
15" models
MPC ST5 2NDJ 10T
MPC YK5 0MNT KIT
–
Protective film for Smart industrial PCs 8.4" models
MPC ST1 1NpJ 00T
MPC YK1 0SPS KIT
–
12" models
MPC ST2 1NpJ 20p
MPC YK2 0SPS KIT
–
15" models
MPC ST5 2NDJ 10T
MPC YK5 0SPS KIT
–
Screen protection
Replacement power
supply connector
AC connector
All Smart models
MPC YN0 0PWA CTE
with AC power supply
MPC STp pNAJ p0p
0.050
–
(1) HMI Runtime Editions will soon be replaced by the client edition + VJDSNRTMPC.
For example, MPCST52NAJ20H will become MPCST52NAJ20T + VJDSNRTMPC.
Introduction:
page 2/4
2/10
Architecture:
page 2/5
Description:
pages 2/6 to 2/7
Specifications:
page 2/8
Dimensions:
page 2/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Dimensions
Magelis® Smart Embedded Panels
Dimensions
MPC ST1 1NpJ00p/MPC ST2 1NpJ 20p/MPC ST5 2NpJ 20p
1
5
Cut-out
C
2
D
B
(1)
p
MPC ST1 1NpJ 00p
MPC ST2 1NpJ 20p
MPC ST5 2NpJ 20p
Introduction:
page 2/4
Architecture:
page 2/5
Description:
pages 2/6 to 2/7
A
A
230
313
395
3
(1)3 < r < 4
B
177
239
294
Specifications:
page 2/8
C
218.5+10
301.5 +10
383.5 +10
D
165.5 +10
227.5 +10
282.5 +10
p
65.0
60.0
60.0
4
References:
pages 2/9 to 2/10
2/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction
Industrial PCs
Magelis® Compact iPC
PC Panels
Introduction
Magelis® Compact iPC provides an easy means of optimizing machine solutions,
from the simplest to the most advanced.
1
With identical dimensions to Magelis XBT GT (1) terminals, Magelis Compact iPC
industrial PCs are a logical extension (like Magelis® Smart panels).
Complementing the Magelis PC BOX range, this range of Magelis Compact iPC
industrial PCs offers compact “All in One” products that meet the needs of machine
manufacturers, system integrators and users. They are more compact, very easy to
install/set-up and open to Web technologies.
2
Magelis® Compact iPC
Like Magelis Smart, Magelis Compact iPC industrial PCs are built around an IP 65
front panel with an 8.4", 12" or 15" color TFT LCD screen and a high definition analog
touch panel.
3
Although compact in size, the Magelis Compact iPC is an open PC designed for
open-ended solutions. It offers:
b The choice of 3 processor speeds: 1 GHz (Intel® Celeron® M), 1.5 GHz (Intel
Celeron M) or 1.6 GHz (Intel® Pentium® M).
4
b The characteristics common to all 3 sizes of Magelis Compact iPC:
v 512 MB expandable RAM,
v optional expansion on PCI bus (1 slot),
v UL 508 certification,
v availability in a 100 to 240 V version
The 8.4" has a Celeron® M 1 GHz processor.
The 12" has a Celeron M 1.5 GHz processor, its hard disk (u 160 GB) is replaceable
and it has a SATA interface. It is also available with a Flash Disk u 15 GB and, for
this, a type II PCMCIA slot is provided.
The 15" has a Pentium™ M 1.6 GHz processor, a hard disk u 80 GB or a Flash Disk
u 15 GB depending on model and 2 slots for PCMCIA card that can take 1 type III or
2 type I cards. In addition, the 15" model is also available with c 24 V power supply.
Magelis Compact iPC also features:
b 512 MB to 1024 MB RAM (8.4" and 12"), 512 MB to 2 GB RAM (15"),
b 2 Ethernet TCP/IP ports:
v 1 x 10/100/1000BASE-T,
v 1 x 10/100BASE-T,
b USB 2.0 ports,
b a 100 to 240 V, 50/60 Hz power supply,
b Various standard serial/parallel ports.
b DVD drive (reader/writer) for 15".
The Magelis Compact iPC is supplied with the Windows XP® Pro operating system.
Combined software package
This offer includes Vijeo Designer™ Run Time control software or Vijeo® Citect®
supervisory software as well as the hardware.
This offer provides an industrial system that is suited to specific application needs, at
a competitive cost.
(1)Identical screen size.
Architecture:
page 2/13
2/12
Description:
pages 2/14 to 2/15
Specifications:
pages 2/16 to 2/18
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Architecture
Magelis® Compact iPC
PC Panels
Architecture examples
Connections to Transparent Ready® architectures
JVM® (Java
Virtual
Machine)
Browser
Magelis®
Compact
iPC
Vijeo®
Citect®
Windows XP® Pro
Ethernet TCP/IP
Premium
Premium™
Quantum™
Advantys™ STB
Advantys STB
The built-in Ethernet ports on the Magelis® Compact
iPC allow it to be integrated into “full Ethernet”
architectures, such as Transparent Ready®.
Transparent Ready devices with this type of
architecture enable transparent communication on the
Ethernet TCP/IP network.
Communication services and Web services assure the
sharing and distribution of data between levels 1, 2 and
3 of the Transparent Ready architecture.
Used as a Client station, the Magelis® Compact iPC
makes it easier to implement Web Client solutions in
relation to:
b Base servers embedded in field devices (Advantys™
STB/Momentum™ distributed I/O, Altivar® 71/38/58
starters, OSItrack™ identification systems, etc.)
b FactoryCast™ Web servers embedded in Modicon®
PLCs (TSX Micro™, Premium™ and Quantum™) or the
FactoryCast gateway.
The following services are available as standard
(without the need for additional programming): alarm
management, synoptic view management and Web
home pages created by the user.
b FactoryCast HMI Web servers embedded in
Modicon Premium and Quantum PLCs also provide
basic data management services, automatic e-mail
sending triggered by specific process events, and
arithmetic and logic calculations for data
preprocessing.
1
2
3
4
In addition, Vijeo® Citect® supervisory software is
provided pre-installed on Heavy Duty type (15 GB
minimum Flash Disk) Compact iPC models with 15"
screen MPC KT 55 MAX 20L and MPC KT 55 MAX
20V.
HMI applications in traditional architectures (Fipway®, Modbus Plus™)
Magelis®
Compact
iPC
Premium™
Windows XP® Pro
Quantum™
Momentum™
Uni-Telway™
OR
The built-in Ethernet TCP/IP port allows Modicon PLC
stations to be connected to levels 2 and 3 of
communication architectures, if required.
Modbus®
Modicon®
M340™
Introduction:
page 2/12
Vijeo
Designer™
The combined offer comprising the Compact iPC
industrial PC and pre-installed Vijeo Designer™ control
software allows them to be used in mono-network
architectures such as Modbus® or Fipway®/Modbus
Plus®. For a Modbus link, one of the built-in RS 232C
COM ports is used.
For Fipway or Modbus Plus, network adaptors need to
be added:
b Fipway network with adaptor TSX CUSB FIP.
b Modbus Plus network with adaptor TSX CUSB MBP.
Premium
Description:
pages 2/14 to 2/15
Specifications:
pages 2/16 to 2/18
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
2/13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Description
Magelis® Compact iPC
PC Panels
Description of the Compact iPC
8.4" touch screen front panel MPC KT1 2NAX 00p
1
The touch screen front panel of the 8.4" industrial PCs MPC KT1 2NAX 00p is comprised of:
1 8.4" SVGA active matrix color TFT LCD screen (maximum display area 800 x 600
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing hard disk memory, etc.).
1
2
3
6
2
3
Lower faces, 8.4"
3 7
1
Expansion slots and connection elements are accessible from the rear of the PC, with the
following elements located on the lower side:
1 Connector for plugging-in the a 100 to 240 V power cable.
2 Vent fitted with a dust filter and fan.
3 Slot for additional Compact Flash memory card.
4 Two 9-pin male SUB-D connectors marked COM1 and COM2 for serial links (see
details on page 2/16).
5 Four USB 2.0 ports.
6 Two RJ45 connectors for the Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
7 Slot for a PCI bus expansion card.
2
4
4
6
Note: AC versions have an On/Off switch.
5
12" touch screen front panel MPC KT2 2pAX 20N
The touch screen front panel of the 12" industrial PCs MPC KT2 2pAX 20N is comprised of:
1 12" XGA active matrix color TFT LCD screen (maximum display area 1024 x 768
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing hard disk memory, etc.).
4 Sealing plate to maintain the IP 65 degree of protection when in place, and when
removed, provides access to:
v USB 2.0 port.
v “Pencil point” RESET button for restarting the processor.
1
2
3
4
Lower and left-hand sides, 12"
8
2
3
4
9
7
1
5
6
Expansion slots and connection elements are accessible from the rear of the PC, with the
following elements located on the lower, left-hand and right-hand sides:
1 Connector for plugging-in the a 100 to 240 V power cable.
2 Vent fitted with a dust filter and fan.
3 Slot for additional Compact Flash memory card.
4 One 9-pin male SUB-D port marked COM1 for serial links (see details on
page 2/16).
5 Four USB 2.0 ports.
6 Slot for 1 additional PCMCIA card.
7 Two RJ45 connectors for the Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
8 Slot for a PCI bus expansion card.
9 RAS port.
Note: AC versions have an On/Off switch.
Introduction:
page 2/12
2/14
Architecture:
page 2/13
Specifications:
pages 2/16 to 2/18
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Description (continued)
Magelis® Compact iPC
PC Panels
9
15" touch screen front panel MPC KT5 5pAX 20p
The touch screen front panel of the 8.4" industrial PCs MPC KT5 5pAX 20p is comprised of:
1 15" XGA active matrix color TFT LCD screen (maximum display area 1024 x 768
points) with high definition analog touch panel.
2 Aluminum alloy front panel with IP 65 membrane (mounted on a treated steel
frame).
3 Two LEDs marked:
v ON (green), PC switched on,
v DISK (green), accessing IDE bus (accessing hard disk memory, etc.).
4 Sealing plate to maintain the IP 65 degree of protection when in place, and when
removed, provides access to:
v USB 2.0 port,
v “Pencil point” RESET button for restarting the processor.
1
2
3
4
6
8
9-10-11
7
1
2
3
4
5
Lower faces, 15"
Expansion slots and connection elements are accessible from the rear of the PC, with
the following elements located on the lower side:
1 Connector for plugging-in the a 100 to 240 V power cable.
2 Two vents, each fitted with a dust filter and fan.
3 Slot for additional Compact Flash memory card.
4 Four 9-pin male SUB-D connectors marked COM1, COM2, COM3 and COM4 for
serial links (see details on page 2/16).
5 Four USB 2.0 ports.
6 Slot for 2 additional PCMCIA cards.
7 Two RJ45 connectors for the Ethernet link:
v 1 x 10/100/1000 Mbps
v 1 x 10/100 Mbps
8 Slot for a PCI bus expansion card.
9 DVD drive (reader/writer).
103.5" floppy disk drive.
11VGA port.
1
2
3
4
Note: AC versions have an On/Off switch.
Introduction:
page 2/12
Architecture:
page 2/13
Specifications:
pages 2/16 to 2/18
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
2/15
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Specifications
Magelis® Compact iPC
8.4" PC Panels
Specifications
1
Front panel characteristics
Type
Touch screen
2
3
Compact iPC 8.4"
MPC KT1 2pAX 00p
8.4”
SVGA active matrix color TFT LCD
Size
Type
Definition
Number of colors
Brightness
Optimum viewing angle
Touch panel
Front panel
800 x 600
262 144
u 200 cd/m2, adjustable
Horizontal 120°, vertical 100°
Analog resistive, 1 million cycles
ON LED: switched on,
Disk LED: accessing hard disk
–
Aluminum alloy with IP 65 membrane on treated steel frame
Polyethylene sheet
IP 65
Signalling
I/O ports
Material
Screen protection
Degree of protection
CPU characteristics
Type
4
Processor
Internal hard disk
Flash Disk
RAM
With Windows XP® Pro
Memory slot
DVD-ROM drive (reader)
Floppy disk drive
Expansion slots PCMCIA cards
MB
PCI port
Built-in I/O ports Ethernet TCP/IP port
USB ports
Serial port COM1
Serial port COM2
Audio
PS/2 keyboard port
PS/2 pointing device port
Operating system
Power supply
Voltage
Frequency
Micro-breaks
Consumption
Material
Mounting
Environment
Certifications
Hz
ms
VA
Immunity to interference
Temperature
Operation
Storage
Relative humidity
Operating altitude
Storage altitude
Vibration resistance
Introduction:
page 2/12
2/16
Architecture:
page 2/13
°C
°C
%
m
m
m/s2
Compact iPC 8.4"
MPC KT1 2NAX 00p
Intel® Celeron® M 1 GHz
u 80 GB IDE, 2.5"
–
512 to 1GB SDRAM
1 slot
–
–
–
1 PCI bus slot
2 RJ45 ports, links:
1 x 10/100/1000BASE-T
1 x 10/100BASE-T
4 USB 2.0 ports
1 RS 232C link (9-pin male SUB-D connector)
1 RS 232C link (9-pin male SUB-D connector)
1 line out
–
–
Windows XP® Pro
a 100 to 240 V (voltage limits 85 to 265 V), conforming to EN 61131-2
50/60 (frequency limits 47/63), conforming to EN 61131-2
20
120 max.
Treated steel
On panel or enclosure door (8 fixing bolts included)
UL 508, CSA 142, IEC 61131-2
High frequency interference, conforming to IEC 61131-2, EN 61000-6-2, FCC (Class A)
Electromagnetic emissions, EN 55011 (Group 1, Class A), EN 61000-3-2, EN 61000-3-3
+ 5 to + 50
- 20 to + 60
10 to 85
0 to 3000 max.
0 to 12 000 max.
9.8 at 10 to 25 Hz/3 axes for 30 minutes
Description:
pages 2/14 to 2/15
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Specifications (continued)
Magelis® Compact iPC
12" PC Panels
Specifications
Front panel characteristics
Type
Touch screen
Size
Type
Definition
Number of colors
Brightness
Optimum viewing angle
Touch panel
Front panel
1
Compact iPC 12"
MPC KT2 2pAX 20N
12”
XGA active matrix color TFT LCD
1024 x 768
262 144
u 250 cd/m2, adjustable
Horizontal 120°, vertical 100°
Analog resistive, 1 million cycles
ON LED: switched on,
Disk LED: accessing hard disk
1 USB port (12 Mbps), protected by IP 65 cover
Aluminum alloy with IP 65 membrane on treated steel frame
Polyethylene sheet
IP 65
Signalling
I/O ports
Material
Screen protection
Degree of protection
2
3
CPU characteristics
Type
Compact iPC 12"
MPC KT2 2NAX 20N
Intel® Celeron® M 1.3 GHz
u 160 GB IDE, 2.5", replaceable by user
Processor
Internal hard disk
Flash Disk
RAM
With Windows XP® Pro
Memory slot
DVD-ROM drive (reader)
Floppy disk drive
Expansion slots PCMCIA cards
MB
PCI port
Built-in I/O ports Ethernet TCP/IP port
USB ports
Serial port COM1
Serial port COM2
Audio
1 line out
Hz
ms
VA
Immunity to interference
Temperature
Operation
Storage
Relative humidity
Operating altitude
Storage altitude
Vibration resistance
Introduction:
page 2/12
Architecture:
page 2/13
°C
°C
%
m
m
m/s2
u 15 GB IDE, 2.5", replaceable by user
4
–
512 to 1 GB SDRAM
1 slot
–
–
1 slot (taking a maximum of 1 x type II card)
1 PCI bus slot
2 RJ45 ports, links:
1 x 10/100/1000BASE-T
1 x 10/100BASE-T
4 USB 2.0 ports
1 RS 232C link (9-pin male SUB-D connector)
–
PS/2 keyboard port
PS/2 pointing device port
Operating system
Power supply
Voltage
Frequency
Micro-breaks
Consumption
Material
Mounting
Environment
Certifications
MPC KT2 2MAX 20N
–
–
Windows XP® Pro
a 100 to 240 V (voltage limits 85 to 265 V), conforming to EN 61131-2
50/60 (frequency limits 47/63), conforming to EN 61131-2
10
120 max.
Treated steel
On panel or enclosure door (8 fixing bolts included)
UL 508, IEC 61131-2, cUL
High frequency interference, conforming to IEC 61131-2, EN 61000-6-2, FCC (Class A)
Electromagnetic emissions, EN 55011 (Group 1, Class A), EN 61000-3-2, EN 61000-3-3
+ 5 to + 50
- 10 to + 60
10 to 85
0 to 3000 max.
0 to 12 000 max.
9.8 at 10 to 25 Hz/3 axes for 30 minutes
Description:
pages 2/14 to 2/15
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
2/17
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Specifications (continued)
Magelis® Compact iPC
15" PC Panels
Specifications
1
Front panel characteristics
Type
Touch screen
2
3
Compact iPC 15"
MPC KT5 5ppX 20p
15”
SVGA active matrix color TFT LCD
Size
Type
Definition
Number of colors
Brightness
Optimum viewing angle
Touch panel
Front panel
1024 x 768
16 777 216
u 250 cd/m2, adjustable
Horizontal 120°, vertical 100°
Analog resistive, 1 million cycles
ON LED: switched on,
Disk LED: accessing hard disk
1 USB port (12 Mbps), protected by IP 65 cover
Aluminum alloy with IP 65 membrane on treated steel frame
Polyethylene sheet
IP 65
Signalling
I/O ports
Material
Screen protection
Degree of protection
CPU characteristics
Type
4
Processor
Internal hard disk
Flash Disk
RAM
With Windows XP® Pro
Memory slot
DVD-ROM drive (reader/writer)
Floppy disk drive
Expansion slots PCMCIA cards
MB
PCI port
Built-in I/O ports Ethernet TCP/IP port
USB ports
Serial port COM1
Serial port COM2
1 PCI bus slot
2 RJ45 ports, links:
1 x 10/100/1000BASE-T
1 x 10/100BASE-T
4 USB 2.0 ports
1 RS 232C link (9-pin male SUB-D connector)
1 RS 232C link (9-pin male SUB-D connector)
Serial port COM3
1 RS 232C link (9-pin male SUB-D connector)
Serial port COM4
1 RS 232C link (9-pin male SUB-D connector)
Audio
1 line out
1 line in
1 mic in
Windows XP® Pro
c 24 V
a 100 to 240 V (voltage limits 85 to 265 V),
conforming to EN 61131-2
50/60 (frequency limits 47/63), conforming to
EN 61131-2
Operating system
Power supply
Voltage
Consumption
Material
Mounting
Environment
Frequency
Hz
Micro-breaks
ms
VA
Certifications
Immunity to interference
Temperature
Operation
Storage
Relative humidity
Operating altitude
Storage altitude
Vibration resistance
Introduction:
page 2/12
2/18
Compact iPC 15"
MPC KT5 5ppX 20p
MPC KT5 5MAX 20p
Pentium® M 1.6 GHz
u 80 GB IDE, 2.5"
–
–
u 15 GB
512 to 2 GB SDRAM
2 slots
Yes
3.5", 1.44 MB
2 slots (taking a maximum of 1 x type III card or 2 x type I cards)
Architecture:
page 2/13
°C
°C
%
m
m
m/s2
Windows XP Pro and Vijeo Designer™ RT
a 100 to 240 V (voltage limits 85 to 265 V),
conforming to EN 61131-2
–
20
150 max.
Treated steel
On panel or enclosure door (8 fixing bolts included)
UL 508, UL 1604, (Haz Loc Class 1 Div 2), cULus, CSA, IEC 61131-2
High frequency interference, conforming to IEC 61131-2, EN 61000-6-2, FCC (Class A)
Electromagnetic emissions, EN 55011 (Group 1, Class A), EN 61000-3-2, EN 61000-3-3
+ 5 to + 50 (+ 5...+ 45 when writing DVD)
- 20 to + 60
10 to 85
0 to 3000 max.
0 to 12 000 max.
9.8 at 10 to 25 Hz/3 axes for 30 minutes
Description:
pages 2/14 to 2/15
References:
pages 2/19 to 2/21
Dimensions:
page 2/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
References
Magelis® Compact iPC
PC Panels
References
Compact iPC industrial PCs
Magelis® Compact iPCs are “rugged” industrial PCs suited to industrial environments.
They are compact, have a wide performance range and are open to Windows XP® Pro
applications.
Powered by an a 100 to 240 V or c 24 V supply, they are fitted with an 8.4", 12" or
15" active matrix back-lit color TFT LCD touch screen. There is a USB port on the
front panel (except 8.4") in addition to the standard USB ports, a hard disk u 80 GB
or u 160 GB or a Flash Disk u 15 GB, as well as a slot for a PCI card and at least 1
slot for a PCMCIA card.
1
2
Compact iPC - Hardware
b The 8.4" models MPC KT1 2pAX 00p (Intel® Celeron® M 1 GHz processor) feature
two Ethernet ports: 1 x 10/100BASE-T and 1 x 10/100/1000BASE-T (RJ45
connectors). They also have a total of 4 USB ports.
b The 12" models MPC KT2 2pAX 20Np (Intel Celeron M 1.5 GHz processor)
feature two Ethernet ports: 1 x 10/100BASE-T and 1 x 10/100/1000BASE-T (RJ45
connectors). They also have a total of 5 USB ports, 1 of which is on the front panel.
The disk is replaceable by the user.
b The 15" models MPC KT5 5ppX 20p (Intel Pentium M 1.6 GHz processor) feature
two Ethernet ports: 1 x 10/100BASE-T and 1 x 10/100/1000BASE-T (RJ45
connectors). They also have a total of 5 USB ports, 1 of which is on the front panel.
Compact iPC - Software package
Magelis® Compact iPC hardware is also available in “package” form, which includes
either Vijeo Designer™ RT or Vijeo® Citect® application software.
3
4
d The use of Vijeo Designer on Magelis Compact iPC industrial PCs requires HMI
Edition-Vijeo Designer RT version for MPC KT1 2NpX 00H (8.4") (1) or MPC KT5
5NpX 20H (15") or activation of a Vijeo Designer license (ref. VJDSNRTMPC) for the
MPC KT2 2NpX 20N (12").
The Vijeo Citect edition of the Magelis iPC complies with the general sales policy for
this software. It is comprised of the DVD with the software and documentation, the
USB key with the user rights already registered and one year technical support. The
software can be used immediately. Updates and license upgrades are available by
providing the key number and are subject to the usual conditions.
This type of offer enables users to acquire, at an attractive price, a pre-installed and
tested industrial-grade system, which is correctly dimensioned to suit software
application requirements. It is supported across the entire Schneider Electric sales
network.
Vijeo Designer™ Runtime for iPC
Magelis® iPC products have traditionally been sold with the choice of units with or
without Vijeo Runtime installed. Vijeo Designer Runtime for Magelis iPC products
can be purchased and installed separately using part number VJDSNRTMPC.
Begining in mid-2010 iPC part numbers for units including the runtime pre installed
will be phased out. It will no longer be necessary to order specific products with
runtime already installed.
(1) HMI Runtime Editions will soon be replaced by the client edition + VJDSNRTMPC.
For example, MPCST52NAJ20H will become MPCST52NAJ20T + VJDSNRTMPC.
Introduction:
page 2/12
Architecture:
page 2/13
Description:
pages 2/14 to 2/15
Specifications:
pages 2/16 to 2/18
Dimensions:
page 2/21
2/19
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
References (continued)
Magelis® Compact iPC
PC Panels
General Purpose Compact iPC with 8.4" screen
With hard disk
1
MPC KT1 2NAX 00N
Processor
Supply voltage
Celeron® M 1 GHz
a 100 to 240 V
RAM
512 MB
expandable
to 1024 MB
Expansion
slots available
1 PCI
Edition
Reference
Client Edition
MPC KT1 2NAX 00N
Weight
kg
4.500
HMI Edition,
Vijeo Designer™ RT
MPC KT1 2NAX 00H
4.500
Edition
Reference
2
General Purpose Compact iPC with 12" screen
With hard disk
Processor
Supply voltage
Celeron M 1.5 GHz
a 100 to 240 V
3
MPC KT2 1NAX 00N
Expansion
slots available
512 MB
1 PCI
expandable 1 x type II
to 1024 MB PCMCIA
Client Edition
Weight
kg
MPC KT2 2NAX 20N (1)
4.500
Client Edition
MPC KT2 2MAX 20N (1)
Expansion
slots available
512 MB
1 PCI
expandable 1 x type III or
to 2 GB
2 x type I
PCMCIA
Edition
Reference
Client Edition
MPC KT5 5NAX 20N
Weight
kg
4.500
HMI Edition,
Vijeo Designer RT
MPC KT5 5NAX 20H
4.500
512 MB
1 PCI
expandable 1 x type III or
to 2 GB
2 x type I
PCMCIA
Client Edition
MPC KT5 5NDX 20N
4.500
HMI Edition,
Vijeo Designer RT
MPC KT5 5NDX 20H
4.500
Edition
Reference
Client Edition
MPC KT5 5MAX 20N
Weight
kg
4.500
HMI Edition,
Vijeo Designer RT
MPC KT5 5MAX 20H
4.500
Vijeo® Citect® Light 1200 I/O MPC KT5 5MAX 20L
4.500
MPC KT5 5MAX 20V
4.500
With 15 GB Flash Disk
Celeron M 1.5 GHz
a 100 to 240 V
4
RAM
512 MB
1 PCI
expandable 1 x type II
to 1024 MB PCMCIA
4.500
General Purpose Compact iPC with 15" screen
With hard disk
Processor
Supply voltage
Pentium® M 1.6 GHz
a 100 to 240 V
MPC KT5 5NAX 20N
c 24 V
RAM
Heavy Duty Compact iPC with 15" screen
With Flash Disk (15 GB min.)
Processor
Supply voltage
Pentium M 1.6 GHz
a 100 to 240 V
RAM
Expansion
slots available
512 MB
1 PCI
expandable 1 x type III or
to 2 GB
2 x type I
PCMCIA
Vijeo® Citect® Full 500 I/O
(1) HMI Edition with license VJDSNRTMPC (sold separately).
Introduction:
page 2/12
2/20
Architecture:
page 2/13
Description:
pages 2/14 to 2/15
Specifications:
pages 2/16 to 2/18
Dimensions:
page 2/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
References (continued),
dimensions
Magelis® Compact iPC
PC Panels
Separate components for Compact iPC
Description
RAM expansion
Details
Compatible with (1)
Reference
512 MB
8.4" models, Celeron® M
MPC KT1 2NAX 00p
12" models, Celeron M
MPC KT2 2pAX 00p
15" models, Pentium® M
MPC KT5 5pAX 20p
MPC YK0 5RAM 512
Weight
kg
–
MPC YK0 5RAM 512
–
MPC YK0 5RAM 512
–
8.4" models, Celeron M
MPC KT1 2NAX 00p
12" models, Celeron M
MPC KT2 2pAX 00p
15" models, Pentium M
MPC KT5 5pAX 20p
MPC YK2 2RA1 024
–
1024 MB
MPC YK2 2RA1 024
160 GB
12" Compact iPC
MPC YNK2 MSD 20N
MPC YNK2 SHD 20N
–
Flash disk
u 15 GB
12" Compact iPC
MPC KT2 2MAX 20N
MPC YNK2 MSD 20N
–
Replacement power
supply connector
AC connector
All Compact iPCs
with AC power supply
MPC KTp ppAX p0p
MPC YN0 0PWA CTE
–
Maintenance kits
Includes panel mounting
fixings and seals
8.4" models
MPC KT1 2NAX 00p
12" models
MPC KT2 2pAX 00p
15" models
MPC KT5 5pAX 20p
MPC YK1 0MNT KIT
8.4" models
MPC KT1 2NAX 00p
12" models
MPC KT2 2NAX 00p
15" models
MPC KT5 5NAX 20p
MPC YK1 0SPS KIT
Protective film for Compact
iPC
2
MPC YK2 2RA1 024
Hard disk
Screen protection
1
MPC YK2 0MNT KIT
–
MPC YK5 0MNT KIT
–
MPC YK2 0SPS KIT
–
MPC YK5 0SPS KIT
–
3
4
(1)And software package variants when available.
Dimensions
MPC KT1 2pAX 00p/MPC KT2 2pAX 00p/MPC KT5 5ppX 20p
5
Cut-out
C
D
B
(1)
p
MPC KT1 2pAX 00p
MPC KT2 2pAX 00p
MPC KT5 5ppX 20p
Introduction:
page 2/12
Architecture:
page 2/13
Description:
pages 2/14 to 2/15
A
A
230
313
395
(1) 3 < r < 4
B
177
239
294
Specifications:
pages 2/16 to 2/18
C
218.5+10
301.5+10
383.5+10
D
165.5+10
227.5+10
282.5
p
120
103.0
103.0
References:
pages 2/19 to 2/21
2/21
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Substitution
1
Industrial PCs
Magelis® Smart Embedded Panels
Equivalent product tables
Magelis® Smart 12" equivalent product table
Type
1
2
Old range
New range
Client Edition
MPC ST2 1NAJ 10T
MPC 21 NAJ 20T
HMI Edition
MPC ST2 1NAJ 10R
MPC ST2 1NAJ 20T +
license VJD SNRTPMVppM
Magelis® Smart 15" equivalent product table
Type
3
Old range
New range
Client Edition
MPC ST5 2NDJ 00T
MPC ST5 2NDJ 20T
Web Client Edition
MPC ST5 2NDJ 10T
MPC ST5 2NDJ 20T
HMI Edition
MPC ST5 2NDJ 10R
XBT GTW 750
4
2/22
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Substitution
0
Industrial PCs
Magelis® Compact iPC
PC Panels
Equivalent product tables
Magelis® Compact iPC 12" equivalent product table
Old range
New range (1)
600 MHz - Windows® 2000
Type
MPC KT2 2NAA 00N
MPC KT2 2NAX 20N
600 MHz - Windows XP® Pro
MPC KT2 2NAX 00N
MPC KT2 2NAX 20N
600 MHz, Windows XP Pro and
Vijeo Designer RT
MPC KT2 2NAX 00R
MPC KT2 2NAX 20N plus
Vijeo Designer™ Run Time
license VJD SNR TMPV ppM
1
2
Magelis® Compact iPC 15" equivalent product table
Old range
New range (1)
667 MHz - Windows 2000
Type
MPC KT5 2NAA 00N
MPC KT5 5NAX 20N
667 MHz - Windows XP Pro
MPC KT5 2NAX 00N
MPC KT5 5NAX 20N
1.7 GHz - Windows 2000
MPC KT5 5NAA 00N
MPC KT5 5NAX 20N
1.7 GHz - Windows XP Pro
MPC KT5 5NAX 00N
MPC KT5 5NAX 20N
667 MHz VL RT - Windows 2000
and Vijeo Look™ RT 1024
MPC KT5 2NAA 00A
MPC KT5 5NAX 20N +
VJL SMD RTL V26M
1.7 GHz VL RT - Windows 2000
and Vijeo Look RT 1024
MPC KT5 5NAA 00A
MPC KT5 5NAX 20N +
VJL SMD RTL V26M
1.7 GHz VL BT - Windows 2000
and Vijeo Look BT 1024
MPC KT5 5NAA 00B
MPC KT5 5NAX 20N +
VJL SMD BTL V26M
667 MHz VL RT - Windows XP Pro MPC KT5 2NAX 00A
and Vijeo Look RT 1024
MPC KT5 5NAX 20N +
VJL SMD BTL V26M
1.7 GHz VL RT - Windows XP Pro
and Vijeo Look RT 1024
MPC KT5 5NAX 00A
MPC KT5 5NAX 20N +
VJL SMD RTL V26M
1.7 GHz VL BT - Windows XP Pro
and Vijeo Look BT 1024
MPC KT5 5NAX 00B
MPC KT5 5NAX 20N +
VJL SMD BTL V26M
667 MHz VD RT - Windows XP Pro MPC KT5 2NAX 00R
and Vijeo Designer™ RT
MPC KT5 5NAX 20H
1.7 GHz VD RT - Windows XP Pro MPC KT5 5NAX 00R
and Vijeo Designer RT
MPC KT5 5NAX 20H
3
4
(1) Windows XP Pro pre-installed.
2/23
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Selection guide
Magelis® Smart BOX
Magelis® Compact PC BOX
Application
Embedded Boxes
Model
Smart BOX
Compatible screen
iDisplay
1
2
3
CPU
4
General Purpose
(Hard Disk)
Heavy Duty
(Compact Flash)
Processor
Intel® Celeron® M 600 MHz
Intel Celeron M 1GHz
Storage
1 GB minimum Compact Flash, expandable to 4
GB
Hard disk u 80 GB
RAM
256 MB minimum, expandable to 1024 MB
512 MB, expandable to 1024 MB
DVD-ROM drive
–
–
Expansion slots
–
1 PCI bus slot
Ethernet TCP/IP network
2 RJ45 ports: 1 x 10/100/1000BASE-T and 1 x 10/100BASE-T
I/O ports
4 x USB 2.0,
2 x RS432,
1 x VGA RGB video port
Operating system
Windows XP® Embedded SP2 (6 languages)
2/24
Windows XP® Pro pre-installed
Base (Windows XP)
a 100...240 V
MPC KN0 2NAX 00N
HMI edition, Vijeo
Designer™ Run Time
a 100...240 V
MPC KN0 2NAX 00H
Client Edition
a 100...240 V
a 100...240 V
MPC SN0 1NAJ 00T
MPC SN0 1NDJ 00T
MPC SN0 1NAJ 00H
c 24 V
MPC SN0 1NAJ 00H
c 24 V
HMI Edition, Vijeo
Designer Run Time
Pages
Compact PC BOX
2/39
2/40
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Selection guide
Magelis® Flex PC BOX
and Front Panels
Applications
Flex PC BOX
1
2
Model
Flex PC BOX F
Compatible screen
Front Panel, iDisplay
CPU
Flex PC BOX H
Processor
Intel® Celeron® M 1.86 GHz or Core Duo 2 GHz
Storage
1 or 2 hard disks u 160 GB, Flash Disk u 15 GB
RAM
512 MB expandable to 2 GB
DVD-ROM drive
Yes, DVD reader, DVD reader/writer available as option.
Expansion slots
2 PCI bus slots
Ethernet TCP/IP network
2 RJ45 ports: 1 x 10/100/1000BASE-T and 1 x 10/100BASE-T
I/O ports
4 x USB 2.0,
4 x RS432,
1 x DIO
1 x DVI-I video port (RGB support)
Operating system
Windows XP® Pro pre-installed
3
4
4 PCI bus slots
a 100...240 V
MPC FN0 pNAX 00N
MPC HN0 pNpX 00N
c 24 V
MPC FN0 pNDX 00N
MPC HN0 5NDX 00N
Heavy Duty (Flash Base (Windows XP)
Disk)
a 100...240 V
MPC FN0 5MAX 00N
MPC HN0 5MAX 00N
HMI edition, Vijeo
Designer™ Run Time
a 100...240 V
MPC FN0 5MAX 00H
MPC HN0 5MAX 00H
Vijeo® Citect® Edition
a 100...240 V
MPC FN0 5MAX 00V
MPC HN0 5MAX 00V
Pages
2/41
2/42
Applications
Screens for Flex PC BOX
Model
Front Panel
General Purpose
(Hard Disk)
12" screen
TFT (800 x 600)
15" screen
TFT (1024 x 768)
19" screen
TFT (1280 x 1024)
Pages
Base (Windows XP)
Data entry via keyboard and touch screen
MPC YB2 0NNN 00N
MPC YT5 0NNN 00N
Data entry via touch screen
MPC YB5 0NNN 00N
Data entry via keyboard and touch screen
MPC YT9 0NNN 00N
Data entry via touch screen
2/43
2/25
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Introduction
Magelis® Smart BOX, Magelis® Compact PC BOX,
Magelis® Flex PC BOX and Front Panels
Introduction
1
For situations where the HMI needs to be separated from a CPU operating in a
Windows® environment, Magelis® BOX industrial PCs offer a variety of solutions with
graded power ratings, designed to meet the HMI and SCADA requirements for both
process applications and machines:
b Connection to standard PC hardware:
v Network: two Ethernet ports (10/100/1G and 10/100).
v USB: four USB ports for storage, WiFi connection, etc.
v Printers: numerous printers are supported.
2
b Applications processed in the Microsoft® Windows® environment:
v SCADA,
v Use of multimedia data: audio, images, video,
v Support for all types of Office® files: Microsoft® Word, Excel®, PowerPoint®, etc.
v Third-party software run in Windows.
3
b Integration in distributed architectures:
v Client/server architecture
v Access to Intranet/Internet network.
Magelis® Flex PC BOX H and 19" Front Panel
The Magelis BOX range consists of four CPUs and two screen families:
4
b Embedded BOX Smart BOX, with Intel® Celeron® M 600 MHz processor, data
storage on 1 GB Compact Flash card, 256 MB of memory, expandable to 1024 MB.
b Compact PC BOX, with Intel Celeron M 1 GHz processor, data storage on hard
disk ≥ 80 GB, 512 MB memory, expandable to 1024 MB; expansion slot available for
PCI card.
b Flex PC BOX F, with Intel Celeron M 1.86 GHz or Core Duo 2 GHz processor,
data storage on one or two hard disks ≥ 80 GB, 16 GB Flash Disk, 512 MB memory,
expandable to 2 GB; two expansion slots for PCI card.
b Flex PC BOX H. As Flex PC BOX F, but with four expansion slots for PCI card.
Magelis® Flex PC BOX F and 15" Front Panel
Compatible flat screens:
b Magelis® iDisplay (industrial display) in two sizes:
v 15" with touch screen, with or without keyboard,
v 19" with touch screen.
Smart BOX and Compact PC BOX CPUs are only compatible with the Magelis
iDisplay.
b Magelis® iPC front panel (for Flex PC BOX CPUs only) in 3 sizes:
v 12" with touch screen and keyboard,
v 15" with touch screen, with or without keyboard,
v 19" with touch screen.
b Magelis Flex PC BOX F and Magelis Flex PC BOX H CPUs can be connected to a
Magelis iPC Front Panel. Depending on the requirements of the application, they
may also be connected to a second Magelis iDisplay interface.
Magelis® Compact PC BOX
Magelis® Smart BOX
References:
pages 2/39 to 2/43
2/26
Dimensions:
pages 2/46 to 2/49
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction (continued)
2
Industrial PCs
Magelis® Smart BOX, Magelis® Compact PC BOX,
Magelis® Flex PC BOX and Front Panels
Introduction (continued)
General Purpose and Heavy Duty versions
Embedded BOX and PC BOX CPUs are available in three versions (1): General
Purpose, Heavy Duty and Optimized.
b General Purpose: Version for “standard” industrial environments, ambient
temperatures generally ranging between 5 °C and 35 °C, and moderate shock and
vibration conditions. General Purpose models feature industrial hard disks:
v Magelis® Compact PC BOX: 80 GB minimum hard disk
v Magelis® Flex PC BOX F/H: 160 GB minimum hard disk
b Heavy Duty: “Rugged” versions of industrial PCs, designed to operate in
environments where harsher conditions prevail in terms of both temperature
(between 0 °C and 50 °C) and vibrations, due to their storage media:
v Magelis Flex PC BOX F/H: 15 GB minimum hard disk
b Optimized: Versions of industrial PCs that are completely solid-state (not a single
moving part is used). They are designed to operate in harsh environments (0 °C to
50 °C) and require no maintenance. These PCs use Windows XP® Embedded
operating systems and a Compact Flash card for storage purposes:
v Embedded Box Smart BOX: 1 GB Compact Flash minimum, expandable to 4 GB.
Integrated diagnostics
Diagnostic functions, specifically designed to simplify maintenance work, are
integral features of the Smart BOX, Compact PC BOX and Flex PC BOX F/H CPUs.
They include:
b Monitoring of the internal temperature of the CPU, with information provided as
follows if set values are exceeded:
v the display of an on-screen message,
v a change in state on a DIO output,
v the starting-up of a system task, for example: sending an e-mail,
v log: in the Windows Event Manager.
1
2
3
4
b Monitoring of the integrity of the hard disk on every startup.
The Magelis® Flex PC BOX F/H CPUs have an integrated RAS interface (2)
comprised of:
- 1 alarm output
- 1 reset input
- 1 general purpose input
- 1 general purpose output
Combined HMI Edition and Vijeo® Citect® Edition offers
The combined HMI Edition offers feature the Smart BOX, Compact PC BOX and
Flex PC BOX F/H CPUs, along with Vijeo Designer™ Run Time software.
The combined Vijeo® Citect® Edition offers feature the Flex PC BOX F/H CPUs,
along with Vijeo Citect Full 500 I/O software.
The Vijeo Citect edition of the Magelis iPC complies with the general sales policy for
this software. It is comprised of the DVD with the software and documentation, the
USB key with the user rights already registered, and one year technical support. The
software can be used immediately. Updates and license upgrades are available by
providing the key number and subject to the usual conditions.
This type of offer enables users to acquire, at an attractive price, a pre-installed and
tested industrial-grade system, which is correctly dimensioned to suit software
application requirements, and is supported across the entire Schneider Electric
sales network.
(1) Excluding Embedded Box Smart BOX, which is available in Optimized version only.
(2) RAS: reliability, availability, serviceability.
References:
pages 2/39 to 2/43
Dimensions:
pages 2/46 to 2/49
2/27
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Introduction,
description
2
Magelis® Smart BOX
Magelis® Smart BOX CPUs
Introduction
1
2
Magelis® Smart BOX CPUs are designed to operate in harsh industrial environments
and offer state-of-the-art technology.
Four Magelis Smart BOX MPC SN0 1NpJ 00p CPU models are available. Key
characteristics are:
b Optimized type with 1 GB Compact Flash mass memory
b Celeron® M 600 MHz processor
b Windows XP® Embedded SP2 operating system pre-installed on all Client Edition
MPC SN0 1NpJ 00T and HMI Edition MPC SN0 1NpJ 00H models.
Magelis® Smart BOX: MPC SN0 1NpJ 00p
The CPUs differ in respect to the following functions and characteristics:
b Vijeo Designer™ Run Time pre-installed on HMI Edition MPC SN0 1NpJ 00H
models.
b a 100 - 240 V power supply for Magelis Smart BOX MPC SN0 1NAJ 00p models,
external AC/DC adaptor included with product.
c 24 V power supply for MPC SN0 1NDJ 00p models.
3
4
7
5
2
3
6
1
Description
4
Magelis® Smart BOX CPUs feature the following elements:
89
10
12
Specifications:
page 2/29
2/28
1 Slot for 1 GB primary (system) Compact Flash card.
2 Slot for secondary Compact Flash card.
3 1 Ethernet 10/100 Base-T port and 1 Ethernet 10/100/1000 Base-T port.
4 4 USB ports.
5 RGB video port: connector for external screen, iDisplay for example.
6 Audio output for loudspeaker.
7 Connectors for COM1 and COM2 ports.
8 Status and power supply LED.
9 Disk access LED.
10Power supply connector.
11Attachment point for USB holder.
12Reset switch.
11
References:
page 2/39
Dimensions:
pages 2/46
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
2
Industrial PCs
Magelis® Smart BOX
Specifications of Magelis® Smart BOX CPUs
Type
Heavy Duty Magelis® Smart BOX
1
MPC SN0 1NpJ 00p
Processor
Storage
RAM
Built-in I/O ports
Ethernet ports
Intel® Celeron® M 600 MHz
1 GB Compact Flash, expandable to 4 GB
256 MB SDRAM, expandable to 1024 MB
1 Ethernet TCP/IP 10/100BASE-T link (RJ45 connector)
1 Ethernet TCP/IP 10/100/1000 BASE-T link (RJ45 connector)
USB
4 USB 2.0 links
Serial links
2: COM1, COM2, RS 232 type (9-pin male SUB-D connector)
Video
1 connection for external RGB video screen
Audio
1 audio output for loudspeakers (mini-jack connector)
Operating system
Windows XP® Embedded, 6 languages depending on Edition.
v HMI Edition: English, French, German, Italian, Spanish and Chinese (simplified).
v Client Edition: English, French, German, Italian, Spanish and Swedish.
Compatible screen from the Magelis offer
Power supply
AC
Voltages
Frequency
Micro-breaks
DC
Voltages
Micro-breaks
Consumption
AC
DC
Material
Mounting
iDisplay
2
3
a 100...240 V (voltage limits 98...264 V), conforming to EN 61131-2
50/60 Hz (frequency limits 47/63 Hz), conforming to EN 61131-2
10 ms
c 24 V (voltage limits 23...25 V)
1 ms max.
130 VA
40 W max.
Nickel plated steel
Horizontal or on wall (in enclosure). Supplied with set of 2 fixings for mounting
4
Environmental characteristics of Magelis® Smart BOX CPUs
Type
MPC SN0 1NpJ 00p
Degree of protection
IP 20
Standards: IEC/EN 60529, NEMA 250, EN 61131-2
Pollution level
Designed for use in environments with pollution level 2
Temperature
In operation
0 to 50 °C, conforming to EN 61131-2, UL 1604
For storage
- 20 to 60 °C, conforming to IEC 60068-2-2 tests Bb and Ab, IEC 60068-2-14 test Na and EN
61131-2
Operating altitude
0...2000 m. Standard EN 61131-2
Vibration resistance
Shock resistance
In operation
0.075 mm amplitude from 10 to 57.6 Hz
1 g amplitude from 57.6 to 150 Hz
Standard EN 61131-2
Out of service
(in storage)
3.5 mm amplitude from 5 to 9 Hz
1 g amplitude from 9 to 150 Hz
Standard EN 61131-2
In operation
15 g peak for 11 ms. Standard IEC 60068-2-27 test Ea and EN 61131-2
Humidity
10 to 90% RH
- wet-bulb temperature: 29 °C max.
- without condensation
Immunity to interference
High frequency interference
Conforming to EN 61131-2, IEC 61000-4-3/6 level 3
Electromagnetic waves
Class A/EN 55022/55011
Information Technology
Equipment
IEC/EN 60950
C-Tick, N998
Industrial Control Equipment
UL 508, CSA 22.2, n° 142
ATEX
II 3 Gas and dust (zone 2/22)
Certifications
Description:
page 2/28
References:
page 2/39
Dimensions:
pages 2/46
2/29
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Introduction,
description
2
Magelis® Compact PC BOX
Magelis® Compact PC BOX CPUs
Introduction
1
Magelis® Compact PC BOX CPUs are designed to operate in either standard
industrial or harsh industrial environments and offer state-of-the-art technology.
The main characteristics of the Compact PC BOX MPC KN0 2NAX 00N CPUs are:
b Celeron® M 1 GHz processor.
b PCI card expansion: 1 slot.
b a 100-240 V power supply.
b Windows XP® Pro SP2 operating system pre-installed.
b Hard disk mass memory ≥ 80 GB..
2
3
Magelis® Compact PC BOX: MPC KN0 2NAX 00N
5
1
Description
2
Magelis® Compact PC BOX CPUs feature the following elements:
1 1 Ethernet 10/100 Base-T port and 1 Ethernet 10/100/1000 Base-T port.
2 4 USB ports.
3 RGB video port: connector for external iDisplay screen.
4 Audio output for loudspeaker.
5 Connectors for COM1 and COM2 ports.
6 Status and power supply LED.
7 Disk access LED.
8 Power supply connector.
9 Reset switch.
10On/Off switch.
11Cooling fan.
12PCI expansion unit interface.
13Slots for 2 Compact Flash cards.
4
3
10
11
13
6 7
8
9
Specifications:
page 2/31
2/30
4
12
References:
page 2/40
Dimensions:
pages 2/46
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
2
Industrial PCs
Magelis® Compact PC BOX
Specifications of Magelis® Compact PC BOX CPUs
Type
General Purpose Magelis® Compact PC BOX
1
MPC KN0 2NAX 00N
Hard disk
Processor
Storage
RAM
Slots for Compact Flash cards
Expansion slots
Built-in I/O ports
Ethernet ports
USB
Serial links
Video
Audio
Floppy disk drive
Operating system
Compatible screens from the Magelis® offer
Power supply
AC
Voltages
Frequency
Micro-breaks
Isolation
Consumption
PCI expansion
Capacity
Consumption
Material
Mounting
Intel® Celeron® M 1 GHz
Hard disk u 80 GB
512 MB SDRAM, expandable to 1024 MB
2
1 PCI 2.2 bus slot
1 Ethernet TCP/IP 10/100BASE-T link (RJ45 connector)
1 Ethernet TCP/IP 10/100/1000 BASE-T link (RJ45 connector)
4 USB 2.0 links (at rear)
2: COM1, COM2, RS 232 type (9-pin male SUB-D connector)
1 connection for external RGB video screen
1 audio output for loudspeakers (mini-jack connector)
1
Windows XP® Pro SP2 pre-installed
iDisplay
2
3
a 100...240 V (voltage limits 85...265 V)
50/60 Hz (frequency limits 47/63 Hz), conforming to EN 61131-2
20 ms max.
a 1500 V, 20 mA for 1 minute
120 VA
4
-c 5 V, 1.5 A
-c 12 V, 0.5 A
-c 12 V, 0.1 A
-c 3.3 V, 0.5 A
10.9 W between 5 °C and 45 °C (ambient air temperature)
Linear decrease to 7.6 W between 45 °C and 50 °C
Nickel plated steel
In enclosure, horizontally or on wall. Supplied with set of 2 fixings.
Environmental characteristics of Magelis® Compact PC BOX CPUs
Type
MPC KN0 2NAX 00N
Degree of protection
IP 20
Standards: IEC/EN 60529, NEMA 250, EN 61131-2
Pollution level
Temperature
Designed for use in environments with pollution level 2
In operation
5 to 50 °C, conforming to EN 61131-2, UL 1604
Storage
- 20 to 60 °C, conforming to IEC 60068-2-2 tests Bb and Ab, IEC 60068-2-14 test Na and EN
61131-2
Operating altitude
Vibration resistance
Shock resistance
0...2000 m. Standard EN 61131-2
In operation
75 mm amplitude from 10 to 57.6 Hz
1 g amplitude from 57.6 to 150 Hz
Standard EN 61131-2
Out of service
(in storage)
3.5 mm amplitude from 5 to 9 Hz
1 g amplitude from 9 to 150 Hz
Standard EN 61131-2
In operation
15 g peak for 11 ms. Standard IEC 60068-2-27 test Ea and EN 61131-2
Humidity
Immunity to interference
Certifications
Description:
page 2/30
10 to 85% RH
- wet-bulb temperature: 29 °C max.
- without condensation
High frequency interference
Conforming to EN 61131-2, IEC 61000-4-3/6 level 3
Electromagnetic waves
Class A/EN 55022/55011
Information Technology
Equipment
IEC/EN 60950
C-Tick, N998
Industrial Control Equipment
UL 508, CSA 22.2, n° 142
References:
page 2/40
Dimensions:
pages 2/46
2/31
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction
Industrial PCs
Magelis® Flex PC BOX
Magelis® Flex PC BOX CPUs
Introduction
1
Magelis® Flex PC BOX high-end CPUs are designed to respond to the most
rigorous, demanding industrial applications requiring optimum processor power and
PCI card expansion.
Magelis Flex PC BOX F: MPC FN0 pppX 00p, with 2 PCI card slots
Magelis Flex PC BOX H: MPC HN0 pppX 00p, with 4 PCI card slots.
2
Two Magelis® Flex PC BOX families are available. A General Purpose version for
standard industrial environments, and a Heavy Duty version for industrial
environments where harsher conditions prevail.
b General Purpose with hard disk ≥ 160 GB, two processor levels and basic RAM
that can be expanded to 2 GB.
3
Magelis® Flex PC BOX F: MPC FN0 pppX 00p
v Intel® Celeron® M 1.86 GHz processor, standard memory: 512 MB
v Core Duo M 2 GHz processor, standard memory: 1024 MB
General Purpose Magelis® Flex PC BOX F/H models are available with a c 24 V or
a 100...240 V power supply, in Base Windows XP® Edition only.
b Heavy Duty with Core Duo M 2 GHz processor, standard RAM: 1024 MB
expandable to 2 GB, 16 GB Flash Disk in versions:
v “HMI Edition”, featuring pre-installed Vijeo Designer™ Run Time software.
v “Vijeo® Citect® Edition” featuring pre-registered Vijeo® Citect® software.
v “Base Windows XP®”.
Heavy Duty Magelis Flex PC BOX F/H CPUs are only available with an a 100...240 V
power supply.
4
All Magelis® Flex PC BOX F/H CPUs can be connected either directly or remotely to
a Magelis Front Panel type flat screen or remotely to a Magelis iDisplay flat screen,
and feature:
v 2 Ethernet TCP/IP ports with RJ45 connector, one of which is 10/100/1000BASE-T,
v 4 USB ports (12 Mbps),
v 4 serial COM ports (RS 232),
v 1 DVD-ROM drive (reader), with option of replacement by a CD/DVD drive
(reader/writer) MPC YN0 0CDW 30N.
v 1 RAS port.
1 DVI-I video port with RGB support, making it possible to connect a Magelis®
iDisplay screen in addition to the main Magelis Front Panel, for example.
Magelis® Flex PC BOX H: MPC HN0 pppX 00p
System Monitor
The System Monitor function featured in Flex PC BOX F/H CPUs enables the
monitoring of several parameters or system functions:
- CPU temperature,
- fan speed,
- supply voltages,
- disk,
- back lighting, etc.
System Monitor controls the handy RAS port in order to signal an alarm (by means of
a digital output), or to initiate a Flex PC BOX restart. Alerts are also signalled in the
form of a pop-up message or a Windows alarm (Event Viewer).
RAID 1 option
The RAID 1 option MPC YN0 0RAI D0N (for General Purpose versions only)
involves configuring a second disk within the system with a mirror image of the first
disk. This increases the system’s tolerance to disk errors and enables it to function
provided that at least one disk is operational. The defective disk can be replaced
without the need to stop the Flex PC BOX. The option includes a disk cartridge with a
capacity ≥ 80 GB and RAID software for installation.
Flex PC BOX with Battery Backup
The Flex PC BOX equipped with Battery Backup MPC HN0 5NBX 00N (for Flex PC
BOX H only) enables the system to continue operating for about 5 minutes
(depending on the system load) in the event of a power failure. UL 60950 certification
only.
Description:
page 2/33
2/32
Specifications:
pages 2/34 to 2/35
References:
pages 2/41 to 2/42
Dimensions:
pages 2/47
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Description
1
Magelis® Flex PC BOX
2
Magelis® Flex PC BOX CPUs
6
8
Description
1
Magelis® Flex PC BOX CPUs feature the following elements:
11
4
3
10
5
7 14 9
12
Introduction:
page 2/32
Specifications:
pages 2/34 to 2/35
13
1 PCI expansion slots.
- Magelis Flex PC BOX F CPUs: 2 PCI cards.
- Magelis Flex PC BOX H CPUs: 4 PCI cards.
2 1 Ethernet 10/100 Base-T port and 1 Ethernet 10/100/1000 Base-T port.
3 4 USB ports.
4 DVI I interface.
5 4 connectors for COM1 to COM4 ports.
6 2 hard disk slots.
7 1 slot for Compact Flash card.
8 1 slot for DVD-ROM drive (reader).
9 4 LEDs:
- 2 disk status LEDs
- 1 power supply/RAS access LED
- 1 disk access LED.
10Audio output for loudspeaker.
11Reset switch.
12Cooling fan.
13Power supply connector and On/Off switch (AC supply models only).
14RAS port.
2
3
4
Note: AC versions have an On/Off switch.
References:
pages 2/41 to 2/42
Dimensions:
pages 2/47
2/33
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
2
Industrial PCs
Magelis® Flex PC BOX
Specifications of Magelis® Flex PC BOX CPUs
1
2
3
4
Type
General Purpose Flex PC BOX
Heavy Duty Flex PC BOX
MPC pN0 pNpX 00p
Hard disk
MPC pN0 5pAX 00p
Flash disk
Processor
Storage
Intel® Celeron® M 1.86 GHz or Core Duo 2 GHz
Hard disk u 80 GB,
Flash disk ≥ 16 GB,
option of adding additional hard disk
option of adding additional Flash disk
RAID function
Option
RAM
512 MB SDRAM, expandable to 2 GB
DVD drive (reader/writer)
Video controller
Video memory
–
Yes
Built-in
–
64 MB max.
Built-in I/O ports
- 1 Ethernet TCP/IP 10/100/1000 BASE-T link (RJ45 connector)
- 1 Ethernet TCP/IP 10/100BASE-T link (RJ45 connector)
- 4 USB ports (12 Mbps)
- 4 COM1 to COM4 RS 232 serial links (9-pin male SUB-D connector)
- 1 connection for DVI-I external video screen (29-pin connector)
RAS interface (1)
On 9-pin female SUB-D connector
- 1 alarm output
- 1 x 2 channel general purpose input
- 1 x 2 channel general purpose output
- 1 reset input
Expansion slots
- 2 PCI bus slots for MPC FN0 pppX 00p
- 4 PCI bus slots for MPC HN0 pppX 00p
Slot for Flash card memory
1 Compact Flash card reader (type I/II compatible)
Audio port
Stereo output for loudspeakers (mini-jack stereo)
Video
DVI-I, 29-pin
Operating system
Windows XP® Pro SP2 pre-installed
Compatible screens
- Front Panels
- iDisplay
Power supply
AC
Voltage
Frequency
Consumption
Micro-breaks
Isolation
a 100...240 V (voltage limits a 85 to 265 V)
50/60 Hz (frequency limits 47 to 63 Hz), conforming to EN 61131-2
120 VA max.
20 ms max.
a 1500 V, 20 mA for 1 minute
DC
Voltage
Consumption
Micro-breaks
Isolation
PCI expansion
Capacity
c 24 V (voltage limits c 19.8...28.8 V)
120 W max.
5 ms max.
c 1000 V, 10 mA for 1 minute
Consumption
10.9 W max. between 5 °C and 45 °C (ambient air temperature)
Linear decrease to 7.6 W between 45 °C and 50 °C
Nickel plated steel
In a type 4X or 12 enclosure
Material
Mounting
-c 5 V, 1.5 A
-c 12 V, 0.5 A
-c 12 V, 0.1 A
-c 3.3 V, 0.5 A
Specifications of Flash disk (Heavy Duty Flex PC BOX only)
Capacity
16 GB
Average time between 2 failures at 25 °C
> 4 000 000 hours
Data integrity
< 1 non-recoverable error per 1014 bits read
(1) RAS: reliability, availability, serviceability.
Introduction:
page 2/32
2/34
Description:
page 2/33
References:
pages 2/41 to 2/42
Dimensions:
pages 2/47
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications (continued)
Industrial PCs
Magelis® Flex PC BOX
Environmental characteristics of Magelis® Flex PC BOX CPUs
Type
Degree of protection
Hard disk
Flash disk
1
Designed for use in environments with pollution level 2. Standard: IEC/EN 61010-1
For operation
5 to 50 °C, conforming to EN 61131-2, UL 1604 (5...45 °C when writing DVD)
For storage
- 20 to 60 °C, conforming to IEC/EN 60068-2-2 tests Bb and Ab, IEC/EN 60068-2-14 test Na
and EN 61131-2
Operating altitude
Vibration resistance
Heavy Duty Magelis® Flex PC BOX
IP 65/NEMA®4x/12 for the screen front panels. IP 20 for screen sides and back panels, and for
the control units as a whole. Standards: IEC/EN 60529, NEMA 250, EN 61131-2
Pollution level
Temperature
General Purpose Magelis® Flex PC BOX
0...2000 m. Standard EN 61131-2
In operation
75 mm amplitude from 10 to 57.6 Hz
1 g amplitude from 57.6 to 150 Hz.
Standard EN 61131-2
Out of service
(in storage/transport)
3.5 mm amplitude from 10 to 57.6 Hz
1 g amplitude from 57.6 to 150 Hz
Standard EN 61131-2
Shock resistance
In operation
15 g for 11 ms. Standard IEC/EN 60068-2-27 test Ea and EN 61131-2
Ambient humidity
In operation
10 to 85% RH
- wet-bulb temperature: 29 °C max.
- without condensation
Storage humidity
2
3.5 mm amplitude from 5 to 9 Hz
1 g amplitude from 9 to 150 Hz
Standard EN 61131-2
3
10 to 85% RH
- wet-bulb temperature: 29 °C max.
- without condensation
Conforming to EN 61131-2
4
Immunity to interference
High frequency interference
Conforming to EN 61131-2, IEC 61000-4-3/6 level 3
Electromagnetic emissions
Class A/EN 55022/55011
Information Technology
Equipment
IEC/EN 60950
Industrial Control Equipment
UL 508/cUL, UL 1604/cUL (HazLoc Class 1 Div 2 cULus)
ATEX
For the c 24 V version only, II 3 gas and dust (zone 2/22)
Certifications
Introduction:
page 2/32
Description:
page 2/33
References:
pages 2/41 to 2/42
Dimensions:
pages 2/47
2/35
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Introduction
Front Panels for Magelis® Flex PC BOX
Introduction
The Front Panel flat screens are designed for use with Magelis® Flex PC BOX F/H
CPUs.
1
The screens feature TFT LCD technology and are available in 3 sizes:
b 12"
MPC YB2 0NNN 00N with data entry via touch screen and keyboard, SVGA
800 x 600 resolution.
2
b 15"
MPC NB5 0NAN 00N with data entry via touch screen and keyboard,
MPC YT5 0NNN 00N with data entry via touch screen,
both with XGA 1024 x 768 resolution.
MPC YB2 0NNN 00N
b 19"
MPC YT9 0NNN 00N with data entry via touch screen, SXGA 1280 x 1024
resolution.
3
All models feature:
v a USB port on the front (with protective cover),
v a pointing device.
4
MPC NB5 0NAN 00N
.
MPC YT5 0NNN 00N
MPC YT9 0NNN 00N
Description:
page 2/37
2/36
Specifications:
page 2/38
References:
page 2/43
Dimensions:
pages 2/48 to 2/49
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Description
2
Industrial PCs
Front Panels for Magelis® Flex PC BOX
Description
5
1
6
7
8
9
10
2 11
4
3
12" and 15" Front Panel with touch screen and keyboard
MPC YB2 0NNN 00N/MPC NB5 0NAN 00N
Front Panels MPC YB2 0NNN 00N/MPC NB5 0NAN 00N with touch screen and
keyboard feature the following:
1 An active matrix color TFT LCD screen with high definition analog touch panel:
- SVGA 800 x 600 for the 12" Front Panel MPC YB2 0NNN 00N
- XGA 1024 x 768 for the 15" Front Panel MPC NB5 0NAN 00N
2 A USB cover for access to:
- a type A USB connector.
- a hardware reset button.
3 A mouse button and left/right-click buttons.
4 20 function and character keys, F1...F20.
5 20 special function and character keys, R1...R20.
6 A key for switching between function/alphanumeric mode with an LED to indicate
that character entry is active.
7 Window navigation keys.
8 Numeric keys.
9 Cursor keys.
10Enter key.
11Two LEDs:
- A power supply/RAS access LED
- An IDE/disk access LED.
1
2
3
4
On the rear panel:
A connection port for the Magelis® Flex PC BOX.
1
2
15 " and 19" Front Panel with touch screen MPC YT5/YT9 0NNN 00N
Front Panels MPC YT5/YT9 0NNN 00N with touch screen feature the following:
1 An active matrix color TFT LCD screen with high definition analog touch panel:
- XGA 1024 x 768 for the 15" Front Panel MPC YT5 0NNN 00N
- SXGA 1280 x 1024 for the 19" Front Panel MPC YT9 0NNN 00N
2 A type A USB connector with cover.
3 A power supply/RAS access LED.
4 A disk access/IDE LED.
On the rear panel:
A connection port for the Magelis® Flex PC BOX.
3 4
Introduction:
page 2/36
Specifications:
page 2/38
References:
page 2/43
Dimensions:
pages 2/48 to 2/49
2/37
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications
2
Industrial PCs
Front Panels for Magelis® Flex PC BOX
Specifications of Front Panels
1
2
3
Type
MPC
YB2 0NNN 20N
YT5 0NNN 00N
Screen
Type
12" SVGA active
matrix color TFT LCD
15" XGA active matrix color TFT LCD
19" SXGA active
matrix color TFT LCD
Definition
800 x 600
1024 x 768
1280 x 1024
Number of colors
262 144
Brightness
u 200 cd/ma2, adjustable
Data entry
Via
Keyboard and touch
screen
Touch screen
Keyboard and touch
screen
Touch screen
Keyboard
Alphanumeric keys
70 standard IBM keys
–
70 standard IBM keys
–
User function keys
2 x 20 keys
–
2 x 20 keys
–
Touch panel
Front panel
4
Pointing device
Built-in
USB port
1
On any Magelis® Flex PC BOX CPU
Power supply
From Magelis® Flex PC BOX CPU
2/38
YT9 0NNN 00N
Analog resistive, resolution: 1024 x 1024
Mounting
Introduction:
page 2/36
YB5 0NAN 00N
Description:
page 2/37
References:
page 2/43
Dimensions:
pages 2/48 to 2/49
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References
2
Industrial PCs
Magelis® Smart BOX
Magelis® Smart BOX CPUs
Magelis® Smart BOX CPUs accept iDisplay flat screens and are equipped with:
b An Intel® Celeron® M 600 MHz processor.
b A 1 GB Compact Flash card.
b 256 MB of RAM as standard, expandable to 1024 GB.
b Two Ethernet TCP/IP ports:
v 10/100BASE-T, 10/100 Mbps (RJ45 connector)
v 10/100/1000 BASE-T, 10/100/1000 Mbps (RJ45 connector).
b Four USB ports, 12 Mbps.
b Two serial COM ports (RS 232).
b An RGB video port.
b A pre-installed Windows XP® Embedded SP2 operating system.
MPC SN0 1NpJ 00p
1
2
Heavy Duty Magelis® Smart BOX
With 1 GB Compact Flash minimum, expandable to 4 GB
Processor
Supply voltage
Celeron® M 600 MHz
a 100 to 240 V
RAM
256 MB
expandable
to 1 GB
Expansion
slots available
–
Celeron M 600 MHz
c 24 V
Edition
Reference
Client Edition
MPC SN0 1NAJ 00T
Weight
kg
2.800
HMI Edition, Vijeo Designer MPC SN0 1NAJ 00H
RT
2.800
MPC SN0 1NDJ 00T
2.800
HMI Edition, Vijeo Designer MPC SN0 1NDJ 00H
RT
2.800
Client Edition
3
4
Separate parts for Magelis® Smart BOX
Description
Compact Flash
memory card
Description:
page 2/28
Specifications:
page 2/29
Specifications
Compatible with
2 GB, with Windows XP
Smart BOX
Embedded SP2 software in 6
languages (English, French,
German, Italian, Spanish and
simplified Chinese) and
Framework .NET pre-installed
Reference
MPC YN1 1CF2 10M
Weight
kg
2.800
Dimensions:
pages 2/46
2/39
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
2
Industrial PCs
Magelis® Compact PC BOX
Magelis® Compact PC BOX CPUs
Magelis® Compact PC BOX CPUs accept iDisplay flat screens and are equipped
with:
b An Intel® Celeron® M 1 GHz processor.
b A hard disk u 80 GB.
b 512 MB of RAM as standard, expandable to 1024 GB.
b Two Ethernet TCP/IP ports:
v 10/100BASE-T, 10/100 Mbps (RJ45 connector)
v 10/100/1000 BASE-T, 10/100/1000 Mbps (RJ45 connector).
b A PCI bus slot.
b Four USB ports, 12 Mbps.
b Two serial COM ports (RS 232).
b An RGB video port.
b A pre-installed Windows XP® Pro SP2 operating system.
1
2
MPC KN0 2NAX 00N
3
General Purpose Compact BOX
With disk drive u 80 GB
Processor
Supply voltage
Celeron M 1 GHz
a 100 to 240 V
4
Description:
page 2/30
2/40
Specifications:
page 2/31
RAM
512 MB
expandable
to 1024 MB
Expansion
slots available
1 PCI bus
Edition
Reference
Client Edition
MPC KN0 2NAX 00N
Weight
kg
3.500
HMI Edition,
Vijeo Designer™ RT
MPC KN0 2NAX 00H
3.500
Dimensions:
pages 2/46
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
2
Industrial PCs
Magelis® Flex PC BOX
Magelis® Flex PC BOX CPUs
Magelis® Flex PC BOX CPUs accept iDisplay and Front Panel flat screens. They are
equipped with:
b An Intel® Celeron® M 1.86 GHz or Core Duo 2 GHz processor.
b Either one or two hard disks u 80 GB or a 16 GB Flash disk.
b RAM expandable to 2 GB:
v 512 MB standard memory with Celeron M processor
v 1024 MB standard memory with Core® Duo® M processor
b DVD-ROM drive (reader)
b Two Ethernet TCP/IP ports:
v 10/100BASE-T, 10/100 Mbps (RJ45 connector)
v 10/100/1000 BASE-T, 10/100/1000 Mbps (RJ45 connector).
b Two or four PCI bus slots.
b Four USB ports, 12 Mbps.
b Four serial COM ports (RS 232).
b One DIO
b A DVI-I video port with RGB support.
b A pre-installed Windows XP® Pro operating system.
MPC FN0 pNpX 00N
General Purpose Magelis® Flex PC BOX F
With hard disk u 160 GB
Processor
Supply voltage
Celeron M 1.86 GHz
a 100 to 240 V
RAM
512 MB
expandable
to 2 GB
Expansion
slots available
2 PCI bus
Edition
Reference
Base Windows XP
MPC FN0 2NAX 00N
Weight
kg
6.000
MPC FN0 2NDX 00N
6.000
MPC FN0 5NAX 00N
6.000
MPC FN0 5NDX 00N
6.000
Celeron M 1.86 GHz
c 24 V
Core Duo 2 GHz
a 100 to 240 V
1024 MB
expandable
to 2 GB
Core Duo 2 GHz
c 24 V
1
2
3
4
Heavy Duty Magelis® Flex PC BOX F
With Flash Disk u 15 GB
Processor
Supply voltage
Core Duo 2 GHz
a 100 to 240 V
Core Duo 2 GHz
a 100 to 240 V
Description:
page 2/33
Specifications:
page 2/34 to 2/35
RAM
1024 MB
expandable
to 2 GB
Expansion
slots available
2 PCI bus
1024 MB
2 PCI bus
expandable
to 2 GB
Edition
Reference
Base Windows XP
MPC FN0 5MAX 00N
Weight
kg
6.000
HMI Edition,
Vijeo Designer™ RT
MPC FN0 5MAX 00H
6.000
Vijeo® Citect® Edition
Full 500 I/O
MPC FN0 5MAX 00V
6.000
Dimensions:
pages 2/47
2/41
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Industrial PCs
Magelis® Flex PC BOX
General Purpose Magelis® Flex PC BOX H
General Purpose with hard disk u 160 GB
1
2
2
Processor
Supply voltage
Celeron® M 1.86 GHz
a 100 to 240 V
Core Duo 2 GHz
a 100 to 240 V
MPC HN0 pNpX 00N
3
RAM
512 MB
expandable
to 2 GB
1024 MB
expandable
to 2 GB
Expansion
slots available
4 PCI bus
Edition
Reference
Base Windows XP®
MPC HN0 2NAX 00N
Weight
kg
7.500
MPC HN0 5NAX 00N
7.500
MPC HN0 5NBX 00N (1)
7.500
MPC HN0 5NDX 00N
7.500
Core Duo 2 GHz
a 100 to 240 V
with backup battery
Core Duo 2 GHz
c 24 V
Heavy Duty Magelis® Flex PC BOX H
With Flash Disk u 15 GB
Processor
Supply voltage
Core Duo 2 GHz
a 100 to 240 V
4
RAM
1024 MB
expandable
to 2 GB
Expansion
slots available
4 PCI bus
Edition
Reference
Base Windows XP
MPC HN0 5MAX 00N
Weight
kg
7.500
HMI Edition,
Vijeo Designer™ RT
MPC HN0 5MAX 00H
7.500
Vijeo® Citect® Full 500 I/O
MPC HN0 JMAX 00V
7.500
(1) UL 60950 certified, not UL 508 certified.
Description:
page 2/33
2/42
Specifications:
page 2/34 to 2/35
Dimensions:
pages 2/47
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Industrial PCs
Front Panels for Magelis® Flex PC BOX
Front Panels for Magelis® Flex PC BOX
Screen size
MPC YB2 0NNN 00N
Type of screen
Data entry via
Reference
12"
SVGA color TFT
(800 x 600)
Touch screen and
keyboard
MPC YB2 0NNN 00N
Weight
kg
–
15"
XGA color TFT
(1024 x 768)
Touch screen
MPC YT5 0NNN 00N
–
Touch screen and
keyboard
MPC NB5 0NAN 00N
–
Touch screen
MPC YT9 0NNN 00N
–
19"
SXGA color TFT
(1280 x 1024)
1
2
3
4
MPC YT5 0NNN 00N
MPC NB5 0NAN 00N
MPC YT9 0NNN 00N
Description:
page 2/37
Specifications:
page 2/38
Dimensions:
pages 2/48 to 2/49
2/43
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Industrial PCs
Separate parts for Magelis® Flex PC BOX
Separate parts for Magelis® Flex PC BOX
Description
1
2
MPC YN0 0HDS 30N
3
MPC YN0 0FSE 00N
4
MPC YN0 0BBU 00N
RAID redundant hard disk Removable cartridge u 160 GB Flex PC BOX
and RAID software
MPC YN0 0RAI D0N
Weight
kg
–
Hard disk
Removable cartridge u 160 GB Flex PC BOX
MPC YN0 0HDS 30N
–
Flash Disk
Removable cartridge u 15 GB Flex PC BOX
MPC YN0 0MSD 00N
–
PCI expansion
Adaptor for 2 PCI cards
Flex PC BOX
MPC YN0 0FSE 00N
–
Maintenance kit
–
Flex PC BOX
MPC YN0 0MKT 00N
–
DVD drive (reader/writer)
CD/DVD (reader/writer)
Flex PC BOX
MPC YN0 0CDW 30N
–
RAM expansion
512 MB
Flex PC BOX
MPC YFR AM05 12N
–
1 GB
Flex PC BOX
MPC YFR AM10 24N
–
2 GB
Flex PC BOX
MPC YFR AM20 48N
–
Mechanical mounting interface Flex PC BOX
for replacing an old Front
Panel by a new one (see table
below)
MPC YN0 0FPF R1N
–
MPC YN0 0FPF R2N
–
MPC YN0 0FPF R3N
–
Screen adaptor
Frame 1
Screen adaptor
Frame 2
Screen adaptor
Frame 3
Specifications
Compatible with
Reference
Screen adaptor selection table
To:
From:
MPC YB2 0NNN 00N
MPC YT5 0NNN 00N
MPC YB5 0NNN 00N
MPC NA2 0NNN 00N
MPC NB2 0NNN 00N
MPC NT2 0NNN 00N
MPC NA5 0NNN 00N
MPC NA5 0NNN 10N
MPC NB5 0NNN 00N
MPC NB5 0NNN 10N
MPC NT5 0NNN 00N
MPC NT5 0NNN 10N
Adaptor
Color code
MPC YN0 0FPF R1N
(Frame 1)
MPC YN0 0FPF R2N
(Frame 2)
MPC YN0 0FPF R3N
(Frame 3)
Adaptation not possible
2/44
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References (continued)
Industrial PCs
Separate parts for all Magelis® iPC ranges
Separate parts for all the Magelis® iPC ranges
Description
Protective sheets
(5 peel off sheets)
Description
Power supply
connector
Size
Reference
8.4" models
MPC YK10 SPS KIT
Weight
kg
–
12" models
MPC YK20 SPS KIT
–
15" models
MPC YK50 SPS KIT
0.200
19" models
MPC YK90 SPS KIT
–
Details
Reference
Replacement connector for
MPC YN0 0PWA CTE
AC supply voltage, for all Magelis
iPC industrial PCs
and iDisplay screens.
1
2
Weight
kg
–
3
4
2/45
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Dimensions
2
Industrial PCs
Magelis® Smart BOX
Magelis® Compact PC BOX
Dimensions
1
Magelis® Smart BOX MPC SN01 NpJ 00p
a
217
a
b
c
a1
a2
b1
c1
c2
c3
164
65
130
15
160
217
238
255
Mounting
2
c3
c2
c1
a2
a
c
b1
a1
b
b
3
4
Magelis® Compact PC BOX MPC KN02 pAX 00p
a
217
a
b
c
d
a1
a2
b1
c1
c2
c3
164
119
65
130
15
160
217
238
255
Mounting
c3
c
c1
b1
a1
b
d
b
2/46
a2
c2
a
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Dimensions (continued),
mounting
2
Magelis® Flex PC BOX
Dimensions (continued)
Magelis® FLEX PC BOX MPC pN0 ppX 00p
MPC FN0 pppX 00p
MPC HN0 pppX 00p
a
b
c
d
e
f
g
a1
a2
a3
b1
c1
c2
c3
243
243
125
176
161
161
38
38
12
12
277
277
289
289
255
255
14
14
6
6
275
275
243
243
258
258
270
270
c
1
g
d
2
b
Mounting
c3
a
e
f
a2
c2
3
c1
g
b1
4
a
e
f
a3
b
a1
d
c
Mounting
The Magelis® Smart BOX, Magelis® Compact PC BOX and Magelis® FLEX PC BOX CPUs are mounted either horizontally or on a wall, using
the fixing sets supplied. Use M4 screws.
2/47
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Dimensions (continued)
Front Panels for Magelis® Flex PC BOX
Dimensions (continued)
1
2
Front Panel MPC Ypp 0NNN 00N
a
b
A
B
12" touch screen and keyboard MPC YB2 0NNN 00N
425
325
383.5
282.5
15" touch screen and keyboard MPC NB5 0NAN 00N
488
367
441.5
313.5
15" touch screen
MPC YT5 0NNN 00N
425
325
383.5
282.5
19" touch screen
MPC YT9 0NNN 00N
460
390
419.5
352.5
Type
Reference
a
a
a
a
b
b
b
b
3
4
Cut-out
A
3<r<4
B
r
2/48
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Dimensions (continued)
Front Panels for Magelis® Flex PC BOX
Dimensions (continued)
Front Panel assemblies - Magelis® Flex PC BOX
a
b
c
d
e
f
12" touch screen and keyboard MPC YB2 0NNN 00N
Type
Reference
425
243
325
10
193.5
244.5
15" touch screen and keyboard MPC NB5 0NAN 00N
488
333.4
367
10
193
244
15" touch screen
MPC YT5 0NNN 00N
425
304
325
10
193
244
19" touch screen
MPC YT9 0NNN 00N
460
441
390
12.7
206.5
258.5
1
2
a
3
c
(2)
b
(1)
4
d
e
(1)
f
(2)
(1) Magelis® Flex PC BOX F CPU with 2 PCI slots.
(2) Magelis® Flex PC BOX H with 4 PCI slots.
2/49
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Connections
Magelis® Smart BOX
Magelis® Compact PC BOX
Magelis® Flex PC BOX
XBT GTW terminals and Smart BOX, Compact PC BOX and Flex PC
BOX Industrial PCs
1
Connections to Schneider Electric devices
2
990 NAA 26320, SUB-D 9
XBT ZG919
+ XBT ZGI232
if with isolation
RS 232C
3
XBT Z9710, SUB-D 9
XBT Z9711, RJ45
Momentum™ M1
XBT Z988, HE 13
Advantys™ STB D I/O
STB XCA 4002, HE 13
TSX PCX 1031, mini-DIN
4
COM1 port
(SUB-D 9)
Modicon® Quantum™ PLC
Twido®
Nano™
Modicon® TSX Micro™
Modicon® Premium™
XBT GTW
Smart BOX
Compact iPC
BOX
Flex PC BOX
TSX P ACC 01 (tap junction)
RS 485
2/50
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Connections (continued)
Industrial PCs
Magelis® Smart BOX
Magelis® Compact PC BOX
Magelis® Flex PC BOX
XBT GTW terminals and Smart BOX, Compact PC BOX and Flex PC
BOX Industrial PCs
Connections to third-party devices
COM1 port
(SUB-D 9)
XBT GTW
Smart BOX
Compact iPC
BOX
Flex PC BOX
Omron CQM1, CVM1, Sysmac®
RS 232C
XBT ZG9731, SUB-D 25
+ XBT ZGI232
if with isolation
Mitsubishi A Link, Melsec®
1
2
Rockwell, DF1-Full Duplex
XBT ZG919
XBT Z9730, SUB-D 9
3
XBT Z9731, SUB-D 25
XBT Z9720, SUB-D 25
XBT ZG9772, SUB-D 9
Mitsubishi Q Link, Melsec®
XBT ZG9774, mini-DIN 8
Mitsubishi Q CPU, Melsec®
XBT ZG9740, SUB-D 9
Omron CQM1, CVM1, Sysmac®
XBT Z9740, SUB-D 9
XBT Z979, SUB-D 9
4
Siemens S7, Simatic® MPI
2/51
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection guide
Industrial PCs
Magelis® iDisplay flat screens
1
2
3
15" touch & keypad
15" touch
19" touch
Touchscreen
15” LCD TFT
15” LCD TFT
19” LCD TFT
Resolution
XGA 1024 x 768
XGA 1024 x 768
SXGA 1280 x 1024
Front side port
1 x USB
1 x USB
1 x USB
Video ports
1 x VGA & 1 x DVI
1 x VGA & 1 x DVI
1 x VGA & 1 x DVI
Touchscreen ports
1 x USB & 1 x RS 232
1 x USB & 1 x RS 232
1 x USB & 1 x RS 232
Power supply
100 to 240VAC
100 to 240VAC
100 to 240VAC
UL508, CSA
Certification
UL508, CSA
UL508, CSA
Dimensions
483 x 365 x 65
395 x 294 x 60
460 x 390 x 65
References
MPCNB50NAN00N
MPCYT50NAN00N
MPCYT90NAN00N
4
2/52
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction,
specifications
Industrial PCs
2
Magelis® iDisplay flat screens
Introduction
Magelis® iDisplay screens are monitors with industrial flat screens designed for
use with PCs.
Two screen sizes are available: 15" and 19" to meet your requirements. Featuring
the latest TFT LCD technology, Magelis iDisplay screens offer high quality visibility
and extended service life. Their touch screen interface enables easy creation of
user-friendly and high performance HMIs.
The Magelis® iDisplay screen MPC NB5 0NAN 00N also has a 70-key (standard
IBM) keyboard and user function keys (2 x 20 keys).
Certified in accordance with PLC product standards and designed for use in severe
industrial environments, these screens provide excellent size/dimensions ratio. They
can be installed easily on machines and/or equipment, and are suitable for use in all
types of environments.
MPC YT5 0NAN 00N
With identical dimensions and same screen size as Magelis® Smart and Compact
iPC industrial PCs, Magelis iDisplay screens can be used to visualise the
development of installations with optimum ease and simplicity.
1
2
3
Architecture
Touch panel entry
4
USB or RS232C
Image
VGA or DVI-D
MPC NB5 0NAN 00N
Specifications of Magelis® iDisplay flat screens
Type
MPC YT5 0NAN 00N
MPC NB5 0NAN 00N
MPC YT9 0NAN 00N
Environment
Product certifications
Temperature
Operation
Storage
UL 508, CSA, IEC 61131-2
UL 1604, UL 508, IEC 61131-2 UL 508, CSA, IEC 61131-2
0 to + 50 °C, conforming to EN 61131-2, UL
- 10 to + 60 °C, conforming to - 20 to + 60 °C
IEC 68-2-2
tests Bb and Ab, IEC 68-2-14
test Na and EN 61131-2
Electrical characteristics
Power supply
Voltages
a 100...240 V (voltage limits
98...264 V), conforming to EN
61131- 2
a 100...240 V
Frequency
50/60 Hz (frequency limits
47/63 Hz), conforming to EN
61131-2
y 20 ms
120 VA
50/60 Hz
Micro-breaks
Consumption
a 100...240 V (voltage limits
85...265 V), conforming to EN
61131-2
10 ms
200 VA
Functional characteristics
Screen
Type
Size
Resolution
Number of colors
Brightness
Back-lighting (service life)
Touch panel
Keyboard
Inputs
Outputs
Image
Touch panel
Active matrix color TFT LCD
15”
XGA 1024 x 768
16 777 216
u 200 cd/m2, adjustable
50 000 hours
Analog resistive, 35 million cycles
–
70 standard IBM keys
2 x 20 function keys
VGA or DVI-D port
USB or RS 232C port
19”
SXGA 1280 x 1024
–
2/53
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
References,
dimensions
Industrial PCs
2
Magelis® iDisplay flat screens
References
Description
1
Specifications
Flat screen for flush
15", XGA
mounting, IP 65 front
(1024 x 768)
panel, supplied with 3 m
long cable.
19", SXGA
(1280 x 1024)
2
Interface
Reference
Touch
MPC YT5 0NAN 00N
Weight
kg
–
Touch and
keyboard
MPC NB5 0NAN 00N
–
Touch
MPC YT9 0NAN 00N
–
Separate components
Description
3
Reference
Maintenance kit:
fixings + seals for
Magelis® iPC 19"
MPC YK9 0MNT KIT
Weight
kg
–
Protective film
for screen on
Magelis® iPC 19"
MPC YK9 0SPS KIT
–
4
Dimensions
iDisplay flat screens MPC YTp 0NAN 00N and MPC NB5 0NAN 00N
b
c
p
a
Cut-out
a1
b1
(1)
(1)3 < r < 4
MPC YT5
MPC NB5
MPC YT9
a
395
483
460
b
294
365
390
c
5
10
12.7
p
60
31
65
a1
383.5 +10
441.5 +10
419.5 +10
b1
282.5 +10
313.5 +10
352.5 +10
Mounting
Magelis® iDisplay flat screens can be mounted on a panel or enclosure door using
the fixing parts (3 x 4 spring clips) included with each screen.
2/54
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Industrial PCs
Specifications
Magelis® XBT GC Compact HMI Controller
1
Type
Specifications
Display
Functions
Communication
LCD screen size / Resolution
3.8” / QVGA
5.7” / QVGA
Type
STN monochrome, amber or red
STN monochrome, gray
Representation of variables
Alphanumeric, bitmap, bargraph, gauge, button, light, clock, flashing light, keypad
Curves / Alarm logs
Yes, with log / Yes, incorporated
2
STN 4096 colors
Control
5 languages IEC
Serial link
–
1 Sub9 (RS 232/RS 422 - RS 485)
Networks
–
–
3
Ethernet, IEEE 802.3
10/100 BASE-T, RJ45
Downloadable protocols
Mitsubishi (Melsec ), Omron (Sysmac ), Rockwell Automation (Allen-Bradley), Siemens (Simatic )
Development software
SoMachine® (on Windows XP® and Windows Vista®)
®
®
®
Uni-TE™, Modbus®, Modbus TCP
Dimensions W x D x H
130x76x104mm
Compatibility with PLCs
Twido®, Modicon® TSX Micro™, Modicon® Premium™, Modicon® Quantum™, Modicon® M340™
Compact Flash card slot
No
207x76x157mm
USB port Host type A
1
1
1
Built-in Ethernet TCP/IP
No
No
Yes
Integrated I/O
12I/6O 24 VDC
16I/16O 24 VDC
Extensions
2 modules TM2
3 modules TM2
or CANopen module
or CANopen module
Supply voltage
References
4
24 VDC
Source Output
XBTGC1100T
XBTGC2120T
XBTGC2230T
Sink Output
XBTGC1100U
XBTGC2120U
XBTGC2230U
Extensions
Type of module
CANopen Master
Specifications
Class M10 limited 16 slaves, Standard DS301 V4.O2
References
XBTZGCCAN
Type of module
Digital Inputs / Outputs
Specifications
8I
24 VDC
Screw terminal
16I
24 VDC
Screw terminal
16I
24 VDC
HE10
32I
24 VDC
HE10
8I
120 VAC
Screw terminal
4I 24 VDC
4O Relays
Screw terminal
References
TM2DDI8DT
TM2DDI16DT
TM2DDI16DK
TM2DDI32DK
TM2DAI8DT
TM2DMM8DRT TM2DMM24DRF
16I 24 VDC
8O Relays
Screw terminal
Type of module
Digital Inputs / Outputs
Specifications
8O Transistor
24 VDC
Screw terminal
16O Transistor
24 VDC
HE10
32O Transistor
24 VDC
HE10
8O Relays
230 VAC 30 VDC
Screw terminal
16O Relays
230 VAC 30 VDC
Screw terminal
Source Output
TM2DD08TT
TM2DD016TK
TM2DD032TK
TM2DRA8RT
TM2DRA16RT
Sink Output
TM2DD08UT
TM2DD016UK
TM2DD032UK
–
–
References
Type of module
Analog Inputs / Outputs
Specifications
2I Current/Voltage
2I Thermocouple
4I Current/Voltage
Temperature
8I Current/Voltage
8I Temperature
8I PTC
References
TM2AMI2HT
TM2AMI2LT
TM2AMI4LT
TM2AMI8HT
TM2ARI8LRJ
TM2ARI8HT
TM2ARI8LT
Type of module
Analog Inputs / Outputs
Specifications
1O Current/Voltage
2O Voltage
2I Current/Voltage
1O Current/Voltage
2I Temperature
1O Current/Voltage
4I Current/Voltage
2O Current/Voltage
References
TM2AMO1HT
TM2AVO2HT
TM2AMM3HT
TM2ALM3LT
TM2AMM6HT
2/55
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
2/56
3/0
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contents chapter 3
Magelis® HMI software
3.1 - Configuration software
Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/2
b Vijeo Designer™ Lite configuration software. . . . . . . . . . . . . . . . . . . . . . . . . . . 3/7
1
b Vijeo Designer configuration software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/17
2
3
4
3/1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Selection guide
Applications
Magelis® HMI software
Traditional architecture, HMI executed on PC platform or dedicated terminal
1
Configuration software for operator dialog applications
2
Target products
3
Functions
4
Development of
graphics
applications
Type
Magelis® XBT N, R, RT (1)
Operating system on terminals
Proprietary Magelis®
Reading/writing of PLC variables
Yes
Display of variables
Data processing
Yes
–
Sharing of variables between HMI
applications
Saving of variables to external
database
–
Native library of graphic objects
Container
Active X®
JavaBeans®
Curves and alarms
Scripts
Yes
–
–
Yes (2)
–
–
Online modification of applications
–
Communication between PLCs and HMI application
Via I/O drivers
Uploading of applications
Yes
Simulation of HMI applications
Yes
Redundancy
–
Recipe management
–
Report printing
–
Access security
Linked to user profiles
Software compatible with OS
Windows® 2000, Windows XP® or Windows Vista®
Type of software
Vijeo Designer™ Lite
Pages
3/2
3/7
(1)Magelis® XBT terminals behave transparently on restoration of power.
(2)Depending on model
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
3
Traditional architecture, HMI executed on PC platform or dedicated terminal
1
Configuration software for operator dialog applications
2
Magelis® STO/STU, XBT GT, GK, GH, GTW (1)
Magelis® Smart, Compact iPC and PC BOX® (1)
3
Except Magelis® XBT GTW: Windows XP® embedded
Yes
Yes
Yes, using expression editor or Java® programming
4
–
–
Yes
–
Yes
Yes, with log
Java®
–
Via I/O drivers
Yes
Yes
–
Yes
Real-time alarms, log data
Linked to user profiles
Windows XP® or Windows Vista®
Vijeo Designer™
3/17
3/3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Introduction
Magelis® HMI software
Vijeo Designer™ Lite configuration software
1
2
Vijeo Designer™ Lite configuration software enables the creation of simple operator
dialog applications on Magelis® XBT N, R and RT Small Panel products. It also
enables transparent recovery of all applications for Magelis XBT N and R produced
using its predecessor: XBT L1000.
For simplified installation and improved consistency, Vijeo Designer™ Lite retains the
main characteristics of Vijeo Designer™ software (ergonomics, interface ...) which
has become the standard for the HMI field.
3
Configuration
Vijeo Designer Lite software enables fast and easy creation of different types of
pages (application page, alarm pages, help pages...) and the installation of
navigation between pages.
4
It offers:
- Graphic objects developed for Magelis XBT RT (bar charts, trend curves...)
- Character fonts Byzantine, simplified Chinese, Cyrillic, Japanese
- Project reports
- Application simulation on PC
- Six languages: English, French, German, Italian, Spanish and Chinese.
Number of licenses
Composition
Single (1)
Without cable With USB cable References
VJDSNDTMSVppM
VJDSUDTMSVppM
Software is delivered on CD-ROM and can be executed under Windows® 2000,
Windows XP® and Windows Vista®. pp represents version number.
These references are downloadable on Schneider-Electric.com
References:
page 3/7
3/4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Functions
Magelis® HMI software
Vijeo Designer™ Lite configuration software
Graphics editor
The graphics editor in Vijeo Designer™ Lite makes it easy for developers of userinterface applications to create pages based on objects:
b Point, line, rectangle, ellipse
b Text and image
b Graphic, trend curve, button, indicator
b Enumerated list and scrolling text
2
Symbols library
Symbols library
1
The symbols library makes the process of creating pages even more efficient.
It contains pictograms which are easily recognizable within an industrial context as
well as drawings of the main components used in automation.
With Vijeo Designer Lite, the user can instantaneously link these graphic symbols
with function keys on the terminal.
3
Links with PLC variables
Vijeo Designer™ Lite also enables the user to link symbols with the internal variables
of Schneider Electric PLCs by importing TwidoSoft™, PL7™ and Concept™
automation database files.
4
Communication table
Communication table
The Communication table in Vijeo Designer Lite provides the user with an easy way
of configuring all data exchanged between the Magelis® compact XBT terminal and
the main device.
The Communication table can also be used to define:
b Access to data: read/write
b All the alarm conditions
Simulator
Vijeo Designer™ Lite makes it possible to simulate the entire user-interface application
at design office level without using a Magelis® compact terminal or a PLC.
The simulator program can be used to thoroughly check the following application
characteristics:
b Navigation between pages
b Entry of variable data
b Variable display
b Alarm display
Application printing
Simulation
The print function for Vijeo Designer Lite can be used with part or all of the HMI
application. It is possible to send the data to a printer or to print to file.
New features of Vijeo Designer™ Lite 1.3
b Direct support of Zelio® Logic on XBTN401, XBTR411, XBTRT511
b All XBTRT graphical objects are now available on XBT N/R
b 3 new graphical objects : enumerated list of text & bitmap, static text
b Enhancement of Windows Vista® support (user mode)
b Enhancement of Simplified Chinese support
b Support of ‘Little Endian’ / ‘Big Endian’ mode in all protocols
b New option for alarm on-line printing
References:
page 3/7
3/5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Magelis® HMI software
Specifications
Vijeo Designer™ Lite configuration software
Specifications of Vijeo Designer™ Lite applications
Schneider Electric protocols
1
Vijeo Designer™ Lite supports Schneider Electric protocols:
- Modbus® RTU Master, Slave
- Uni-Telway™
Specifications of the Vijeo Designer™ Lite software
2
Operating system compatibility
Windows® 2000
Windows XP® Professional
Windows Vista® Professional, 32-bit
Application validation
Calculation of the maximum memory space occupied by the application.
Verification of the capacity of the target (Magelis® compact XBT terminal) configured to run the
application:
- Physical memory capacity
- Available functions
If applicable:
- Disabling of application upload/download
- Direction towards sections of the online help, which will provide tips for optimizing the
application
Interface languages
Vijeo Designer Lite software screens and online help available in English, French, German,
Italian, Simplified Chinese and Spanish
Documentation
Available in electronic format in English, French, German, Italian, Simplified Chinese and
Spanish. Not available in hard copy
User licenses
Four types of license are available:
- Single: one station
- Group: 3 stations
- Team: 10 stations
- Facility: unlimited number of stations on one site
Supplied with or without transfer cable(s), for serial link or USB port
(see table of references for each Magelis® compact terminal on page 3/7).
Registration
Recommended (via fax, e-mail or web site www.schneider-electric.us//swregistration), provides
access to additional resources such as application examples, etc.
3
4
Third-party protocols
Mitsubishi
Omron
Rockwell Automation
Siemens
Vijeo Designer Lite also supports the following protocols and PLCs:
Melsec® FX protocol (CPU)
Sysmac® protocols
Allen-Bradley protocols: DF1-Full Duplex, RS DataHighway 485
Simatic® PPI protocols
References:
page 3/7
3/6
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Magelis® HMI software
References
Vijeo Designer™ Lite configuration software
References
All licenses for the Vijeo Designer™ Lite configuration software listed below include a CD-ROM
containing:
v Vijeo Designer Lite V1.3 software
v User documentation in electronic format
v The communication protocols described on page 3/6.
v XBT L1001 development software for converting existing XBT applications
1
Single-station licenses
Designation
License type
Single
Vijeo Designer™
Lite configuration (1 station)
software
Application transfer cable included
PC-side port Terminal side
Magelis® XBT/
Magelis® iPC
–
– (1)
Reference
Weight
kg
VJDSNDTMSV13M
0.125
USB
VJDSUDTMSV13M
0.675
Number of stations (1)
Reference
Multi-station licenses
Designation
License type
2
3
Weight
kg
Group, Team and Facility licenses are no longer required for Vijeo Designer™ Lite. There are no
restrictions for number of users per license for Vijeo Designer Lite 1.3. Vijeo Designer Lite 1.3 can be
downloaded free of charge from www.schneider-electric.us/
(1)Separate parts: For application transfer cables (PC to XBT N/R/RT terminal), see page 1/20.
3/7
4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Magelis® HMI software
Introduction
Vijeo Designer™ configuration software
1
Navigator
Application
2
Vijeo Designer™ configuration software enables creation of automated system
control operator dialog applications for Magelis® STO/STU, XBT GT, GK, GTW, GH
terminals and Smart & Compact iPC and PC BOX. It also enables management of
the multimedia functions of XBT GTW and Smart & Compact iPC (video and audio),
as well as offering users of Ethernet terminals and iPC remote access via a Web
browser (WEB Gate function).
3
Configuration
Vijeo Designer™ configuration software enables fast, simple processing of operator
dialog projects thanks to its ergonomics, developed around 6 configurable windows.
4
Property
Inspector
Feedback zone
Animated
graphical
objects
library
It also offers comprehensive application management tools, including:
- Project creation; projects comprising one or several targets (terminal or iPC).
- Recipe editor (32 groups of 256 recipes of max- 1024 ingredients).
- User action list (eg- script) for application adaptability.
- Application variable cross-referencing.
- Vectorial graphic library for more attractive graphic screens.
- Application block diagram documentation.
- Simulation mode for simple design office application testing.
- High-performance graphic editor for simple block diagram creation (over 30
animated pre-configured generic objects).
- Support of layers and masks for faster development.
- Data sharing (up to 300 variables on 8 terminals).
- Management of 40 alphabets (including simplified Chinese, Korean, Arabic and Hebrew)
with the opportunity to have 15 languages per application and dynamic change.
- Programmable controller database sharing (Unity™ Pro, PL7™, Concept™,
TwidoSoft™, ProWORX™, ModSoft™), process variables or operators actions
- Advanced traceability function (periodic, at event or on request).
- Project backup on terminal for simple maintenance.
- User-friendly data recovery tool.
- Support of standard USB peripherals (USB key up to 4 GB).
- Support of external USB keyboards and mice.
- Integration with Schneider Electric equipment (buffer diag., variables access, Unity
DDT and unlocated variables.)
- Event-triggered e-mail funtion
- Over 35 third party protocols
- Multilingual software: English, French, German, Italian, Spanish, Portuguese and
Simplified Chinese.
- Printing function
The Vijeo Designer™ Limited Edition, downloadable or free access allows you to
configure the Magelis STO/STU.
Number of licenses
Composition Single (1)
Without cable With USB cable References
Group (3)
Without cable VJDGNDTGSVppM
Team (10)
Without cable VJDTNDTGSVppM
Facility (Unlimited)
Without cable
VJDFNDTGSVppM
VJDSNDTGSVppM
VJDSUDTGSVppM
The software is supplied on DVD and runs under Windows XP®, Windows Vista®
and Windows 7. pp represent the version number.
Runtime for Magelis® iPC
Composition Single (1)
Without cable 3/8
References
VJDSNRTMPC
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Functions
Magelis® HMI software
Vijeo Designer™ configuration software
Graphics editor
The graphics editor in Vijeo Designer™ offers interface consistency for simple objects
as well as for more sophisticated ones. It enables application developers to create
mimics easily based on:
b Simple objects to be configured:
v Points, lines, rectangles, ellipses, arcs
v Bar graphs, gauges, tanks, fillers, pie charts, curves
v Polylines, polygons, regular polygons, Bézier curves, scales
v Texts, images or alarm summary, etc.
b Preconfigured advanced objects: Switches, radio buttons, indicators, buttons,
tanks, bar graphs, potentiometers, selector switches, text or number fields,
enumerated lists, etc.
b Screen masks and skeletons for type applications
Object animations
8 types of graphic-object animation support the rapid creation of animated mimics for:
b Pressing the touch panel
b Change of color
b Filling
b Movement
b Rotation
b Size
b Visibility
b Display of associated value
1
2
3
4
Library of animated graphic objects
The library of animated graphic objects makes the creation of mimics very efficient
thanks to the numerous "ready-made" animation objects. It includes more than 4000
"industrial" vector images in 2 or 3 dimensions. Simply "drag and drop" the object
using the mouse to position it on the mimic being created.
User-defined objects can be added to this library using the same simple "drag and
drop" method.
Java® scripts
Vijeo Designer™ supports the processing of information using Java® language
scripts. This function facilitates the running of complex animations, the automation of
tasks within the terminal, and the management of calculations to relieve the load on
the PLC programs.
The scripts (50 lines, max.) can be associated with:
b Variables
b Operator actions
b Screens
b The application itself
User-customizable resources
To enable applications to be customized in accordance with customer requirements,
Vijeo Designer™ features a new resource concept, i.e. the possibility of defining
styles (colors, images, character fonts, text lists).
To customize a generic application in accordance with customer requirements
quickly, simply assign these styles to the objects concerned.
The resource concept is supported by the following native objects: Meter, Bar Graph,
Slider, Potentiometer, Selector, Text List and Image List.
3/9
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Functions (continued)
Magelis® HMI software
Vijeo Designer™ configuration software
Advanced functions
1
2
Data Manager: Transfer recipes, videos, images, etc. via
Ethernet or USB, by simply clicking the mouse.
3
4
Based on new information technologies, Vijeo Designer™ features a large number of
advanced functions for processing a higher volume of data, both faster and more
reliably:
b Multimedia data management in the following formats:
v Image display (jpeg, bmp, emf and png files)
v Text display and processing (txt files)
v Sound-message processing (wav files)
b Alarm or curve logs recorded
b In/out zoom function for a focused analysis of trend curve displays
b Alarm management. All variables can be categorized as "Alarms" and can be
customized in respect to visualization and acknowledgment. These Boolean and
analog-threshold type alarms can be printed in real time.
b Multimode application transfer: via serial link, USB, Ethernet and Compact Flash
memory card (on multifunction terminals)
b Back-up of application source files on the terminal or iPC to facilitate maintenance
b User-friendly data exchange between PC and terminal using the Data Manager
tool
b Integrated FTP server for downloading/uploading recipes via Ethernet TCP/IP and
restoring logs to XBT GT/GK/GTW and Magelis® iPC terminals
b Multiport communication for multifunction terminals - 2 serial links and 1 Ethernet
network can be active simultaneously.
b Action table for associating a particular behavior with an event
b Using a USB memory stick (up to 2 GB) to download an application, retrieve data
or exchange recipes
WEB Gate remote connection
Vijeo Designer™ can provide a WEB Gate remote connection for any platform
equipped with an Ethernet port and Compact Flash or hard disk memory. This
includes: XBT GT/GK/GTW (XBT GT2110 and higher), Magelis® Smart, Compact
iPC HMI edition and PC BOX.
Alarm management
WEB Gate supports remote visualization of Vijeo Designer™ applications
with Internet Explorer® on any PC running Windows XP® or Windows Vista®. The size
of the page displayed is determined by the terminal.
WEB Gate supports the display of pages similar to those in the Vijeo Designer
application, or of different pages, including: startup pages and navigation pages that
can be differentiated in order to indicate the type of access (terminal/WEB Gate).
It is possible to have more than one connection at the same time, with the number of
connections depending on the size of the application.
WEB Gate's high-security mode reduces risk of applications jamming as a result of
variables being modified via the terminal and WEB Gate at the same time.
For increased confidentiality:
b WEB Gate access can be restricted to only those PCs whose IP address appears
in the licensing list.
b Some Vijeo Designer functions are not supported by WEB Gate:
v Application shutdown, restart
v Terminal configuration
v Read an acoustic animation (sound file)
v Display a recorded video sequence
WEB Maintenance remote diagnostics
In addition to WEB Gate, Vijeo Designer™ features the embedded diagnostics
service WEB Maintenance - Transparent Ready® WEB Server Class B15 (1) - this
server's navigation bar features an option for accessing the WEB Gate function.
Note: Terminals programmed using Vijeo Designer can be accessed directly via their names.
This function is supported by the DHCP and DNS network services.
Report printing
(1)Please consult our "Control and automation, Ethernet TCP/IP and the Web" catalog.
3/10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Magelis® HMI software
Specifications Vijeo Designer™ configuration software
Specifications of Vijeo Designer™ applications
General characteristics
Number of targets
32, either XBT GT/GK/GTW terminals or Magelis® Smart HMI edition, Compact iPC HMI edition
and PC BOX industrial PCs
Number of internal and external
variables
Number of lines per Java® script
8000
Sharing data between terminals
Up to 300 variables between 8 terminals, without router PLC.
Proprietary protocol above TCP/IP.
Internationalization
Up to 15 languages supported by 34 western alphabets, 4 Asian alphabets,
2 middle eastern alphabets:
1
50 (1)
2
Western
alphabets
Afrikaans
Belarusian
Spanish
Dutch
Lithuanian
Romanian
Swedish
Albanian
Bulgarian
Estonian
Hungarian
Macedonian
Russian
Czech
German
Catalan
Finnish
Indonesian
Norwegian
Serbian
Turkish
English
Croatian
French
Italian
Polish
Slovak
Ukrainian
Basque
Danish
Greek
Latvian
Portuguese
Slovenian
Asian alphabets Simplified
Korean
Japanese
Taiwanese
Chinese
Middle eastern Hebrew
Arabic
alphabets
Functions
Languages can be programmed or selected dynamically via the menu.
The character fonts are embedded in the application.
The process is based on the export/import of texts in CSV format, which can be edited by the
translator (each text is stamped with a unique ID).
Keyboards that Three types of keyboard are available:
can be used to - Standard AZERTY or QWERTY
enter data
- Alphabetical
- Compact, suitable for small screens and for pages with priority display zones
Storage of
- The application source code can be stored either on the terminal or on the iPC.
source code
- A password provides confidentiality.
- On request, the application can be verified each time the terminal starts up by means of a
CRC calculation High Security function).
3
4
Specifications of pages
Internal or external variables
Objects
Switches
Pop-up windows
Number of lines per Java script
800
800
30
3
50 (1)
Library of graphic objects
Number of objects available
Type
Can be expanded?
> 4000
2D and 3D "industrial" vector images
Yes
Recipes
Number of groups
Composition of a group
Multilingual support
32
Up to 1024 ingredients for 256 recipes
Complete for labels and ingredients
Action tables
Number of actions
Composition
Action type
100
Maximum of 16 commands per action
- Periodic
- Planned
- Conditioned
- Event-based
(1)Indicative data for a script executed cyclically
3/11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications (continued) Magelis® HMI software
Vijeo Designer™ configuration software
Specifications of Vijeo Designer™ applications (continued)
Alarms
1
2
No. of alarms activated, record
or logs
Type
9999
Easy customization
Any alarm-type variable can be customized in respect of visualization and acknowledgment.
Associated reflex functions
Any alarm-type variable can be associated with reflex functions linked to the appearance of the
alarm concerned:
- Action on appearance
- Action on selection
- Message for the alarm bar, etc.
Any variable (internal or external, Boolean or analog-threshold) can act as an alarm.
Integrated diagnostics
The PLC "Diag buffer" function
can be accessed via the
following protocols:
3
Modicon®
M340™
Unity™ Pro
Modicon®
Premium™
PL7™
Modicon®
Premium™
Unity Pro
Modicon®
Quantum™
Unity Pro
UNITE series
UNITE-TCP/IP XWAY™
UMAS Modbus® TCP
UMAS Modbus RTU
UMAS Modbus Plus™
UMAS UNITE series
UMAS UNITE-TCP/IP XWAY
UMAS Modbus TCP USB PPP
4
Accessible
Not accessible
Video functions
Platform
3/12
XBT GT terminals
XBT GTW terminals
Magelis® Smart HMI edition
Magelis® Compact iPC HMI edition
PC BOX
Video source
NTSC, PAL video channel
Webcam
Input format
Composite video (chrominance+luminance)
via RCA plug
Webcam via USB port
Display resolution
NTSC: 640 x 480 pixels
PAL: 768 x 576 pixels
Depending on webcam characteristics (usually
640 x 480 pixels)
Duration of dynamic
memorization
10 mins. max., can be configured,
in circular memory (MPEG-4 format)
–
Recording of sequences
Media
Compact Flash card
Compact Flash card
Hard disk
Number of sequences
Up to 200
Recording format
Simple MPEG-4 profile
Recording resolution
320 x 240 pixels
Typical recording rate
3.2 MB/minute
Determined by the CODEC used on the PC
Typical capacity
Up to 28 sequences lasting up to 10 minutes
can be stored on a 1 GB Compact Flash card.
Determined by the space available on the hard
disk
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications (continued) Magelis® HMI software
Vijeo Designer™ configuration software
Specifications of Vijeo Designer™ applications (continued)
Screen capture
Format
Resolution
Ranges supported
Video window included
Backup
Format
XBT GT 1105 terminals and
higher
Magelis® Compact iPC industrial
PCs
Transfer
JPEG
Display resolution
XBT GT terminals (XBT GT 1105 and higher),
Magelis® Smart HMI edition, Magelis® Compact iPC HMI edition and PC BOX industrial PCs
Yes
JPEG
On Compact Flash card
2
On Compact Flash card
On hard disk
Via USB memory stick or Data Manager on the terminal or on an iPC equipped with an Ethernet
connection or USB port
Printing
XBT GT 1105 terminals and
higher
With the Magelis® Smart and
Compact iPC HMI edition
industrial PCs and later
1
Via USB port (1) or Ethernet port, with a compatible printer (2):
PCL5
- HP Officejet Pro™
- HP LaserJet®
PCL3
- HP Deskjet™ series
- HP Business InkJet™
- HP Officejet Pro™
- HP LaserJet®
- HP Photosmart™ series
ASCII
With any printer equipped with a suitable driver for Microsoft Windows®
3
4
Creating and printing reports and barcodes
Creating reports
Report printing
XBT G
terminals
Reports are created in the same way and with the same WYSIWYG editor as for Vijeo
Designer™ pages.
Text printer via:
Parallel port
COM port
XBT GT
terminals
Text printer via:
COM port
USB port with PIO adapter
NB: printers with a USB port and network printers are not supported.
Magelis® iPC,
PC BOX
Based on Windows printing configuration, using a text printer via:
Parallel port
COM port
Network
Barcode printing
Can be done by sending special characters to switch the printer to barcode printing mode
Main barcode types supported:
UPC-A
UPC-E
JAN/EAN8
JAN/EAN13
ITF
CODE39
CODE93
CODE128
CODABAR (NW-7)
Internet Explorer® browser object
Support
Possible functions
Pages created in Vijeo Designer™ for Magelis® Smart, Compact and iPC HMI edition can
feature a Microsoft Internet Explorer browser object.
Display, in all or part of the Vijeo Designer screen page, of:
- HTML format pages: e.g., web sites, pages from Microsoft Office®, Microsoft Word, Excel®
and Powerpoint® documents saved in HTML format
- Documents in Adobe® pdf format
- Macromedia Flash® presentations
- Video sequence (streaming) originating from a video server on IP
- Any other Active X® featuring a USB port
(1)A printer can be connected to the USB port of XBT GT terminals (XBT GT 1105 and higher) as
long as the printer connection is serial or parallel. A serial-to-USB or parallel-to-USB
conversion cable is also required.
(2)For a complete list of Hewlett Packard and other manufacturer printers supported, please
consult your Regional Sales Office.
3/13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications (continued) Magelis® HMI software
Vijeo Designer™ configuration software
Specifications of Vijeo Designer™ applications (continued)
Displaying user documentation pages on the XBT GT/GK
1
Support
User documentation stored on the Compact Flash card of the XBT GT/GK can be displayed
with Vijeo Designer™, provided it is in HTML V4.01 CSS 1.0 format.
Most DTP software supports export to HTML format: Adobe Acrobat®, Microsoft® Word,
Microsoft Powerpoint®, etc.
Schneider Electric applications
Support
2
Possible functions
3
Pages created with Vijeo Designer for Magelis® Smart, Compact iPC and PC BOX can run
Schneider Electric software in a window that is independent of the Windows® system.
It is also possible to run frequently-used application software as and when required, including:
- Unity™ Pro
- TwidoSuite™
- Advantys™ STB configuration software
- PL7™
- PowerSuite™, etc.
Traceability, logs
Vijeo Designer offers increased flexibility for implementing data traceability by means of
sampling and management of log files. Every variable can be written in a recording group. All
data is time and date-stamped (based on GMT) to facilitate comparison of data from different
sites. Time Zone and DST are also supported so that local characteristics such as the change
from winter to summer time can be taken into account.
A recording group defines the following elements:
Recording type
4
Storage media
Maximum size
Capacity
Target terminal
- Periodic
- Event-based
- Compact Flash memory card
- SRAM terminal memory (for alarms)
- Hard disk (Magelis® Compact iPC and PC BOX)
- Maximum number of recordings
- Maximum file size
The designer of the application concerned is entirely free to select the number of variables
sampled and the sampling frequency (these will be determined by the media present on the
target). The following are typical example values:
XBT GT/GK
XBT GTW
Magelis® Smart HMI PC BOX
edition
Magelis® Compact
iPC HMI edition
Number of variables sampled
100
250
Target storage medium
Maximum duration and size of
samples per variable
Compact Flash card
Up to 5 years of recordings
Up to 8 MB of samples per variable
Hard disk
Data Manager
The user-friendly Data Manager tool is used to transfer data from and to a terminal.
This copyright-free program does not require Vijeo Designer to be installed and can be installed
independently for the following types of transfer:
Logs
Recipes
Project
Video sequences,
screen captures
- Recovery of log data for variables
- Conversion into a single CSV format file
- Transfer from and to terminal
- Modification using an integrated editor
- Download to PC of the project stored on the Compact Flash memory card
- Download to PC
Data sharing
Vijeo Designer™ offers the possibility of sharing data between terminals (this option simply
needs to be configured).
The system works without a router PLC. Up to 300 variables can be shared between a
maximum of 8 terminals.
The exchange protocol is a TCP/IP proprietary upper layer.
The high-security mode reduces risk of applications jamming, which can occur when attempts
are made to modify a variable via more than one terminal at the same time.
3/14
Restrictions
Vijeo Designer™ imposes the following restrictions on the sharing of data:
Sharing of external variables on
the terminal
These variables cannot be used in the following objects:
- Trend graphs
- Data graphs
These variables cannot be saved via the terminal.
System and recipe
variables
The direct sharing of these variables by means of configuration settings is not supported.
However, sharing can be programmed using the ReadFromVar and WriteToVar functions.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications (continued) Magelis® HMI software
Vijeo Designer™ configuration software
Specifications of Vijeo Designer™ applications (continued)
Terminal access security
Type of right
Number of users per group of
rights
Number of groups of rights
Automatic locking
Access to all or some of the objects in Vijeo Designer™ can be made subject to users proving
that they are in possession of sufficient rights (user name and password).
- Application: pages, buttons with confirmation, etc.
- Data Manager: access via FTP service
- Web Gate: intranet/extranet access (IP address filtering)
Up to 100
Up to 20
If active: automatic blocking of access via keyboard if no entries are made for a set period of
time
1
2
Target security
BIOS
Run-Time Vijeo Designer™
Vijeo Designer™ can increase the confidentiality of applications on Magelis® Smart HMI edition,
Compact iPC HMI edition and PC BOX by putting protection mechanisms in place at two levels:
- Disabling of startup via peripheral connected to USB port
- Disabling of USB ports
- Password protection for BIOS access
- Hiding of Windows® taskbar
- Disabling of toggling between tasks (ALT+TAB)
- Disabling of Windows Security Manager (CTRL+ALT+DEL), including the Task Manager
- Disabling of Windows shortcuts
- Disabling of the "Windows logo" key on the keyboard
- Disabling of shortcut to exit run time (CTRL+Z)
3
4
Schneider Electric protocols
Vijeo Designer™ supports Schneider Electric protocols:
- Modbus® RTU Master
- Modbus TCP/IP Master
- Modbus Plus™ (1)
- ELAU® PacDrive®
- Uni-Telway™
- UniTE TCP/IP
- USB terminal port for Modicon® M340™ CPUs
- FIPIO® (5), FIPWAY® (5)
All Schneider Electric drivers offer IEC access to input and output
bits/words: Modbus (RTU and TCP/IP), Modbus Plus (GMU and USB), Uni-Telway, Xway™.
Direct I/O access authorizes access to hardware input and output registers.
Register addresses comply with the syntax of IEC standards and the address rules for UNITY™
configuration software (%I, %IW, %Q, %QW).
If requested by the user, the variables associated with a PLC can be read
("on demand scan" function).
The DDT and unlocated variables of Unity™ Pro are supported.
Third-party protocols
Mitsubishi
Vijeo Designer™ also supports the following protocols and PLCs:
Melsec® protocols: A/Q CPU (SIO), A/Q Ethernet (TCP), A Link (SIO), QnA CPU (SIO), Q
Ethernet (UDP), FX (CPU), FX 3U (CPU).
Except for Melsec-A Link (SIO), Mitsubishi serial link protocols do not work on the RJ45 port (1).
Omron
Sysmac® protocols: FINS (SIO), LINK (SIO), FINS (Ethernet) and Trajexia.
OMRON serial link protocols do not work on the RJ45 port. (2)
Rockwell Automation
Allen-Bradley protocols: DF1-Full Duplex, RS DataHighway 485, Ethernet IP (3) (PLC5,
SLC500, MicroLogix, ControlLogix®), Ethernet IP native (2) (ControlLogix),
DeviceNet Slave (6)
Siemens
Simatic® protocols: MPI (S7-300/400), MPI Direct, RK512/3964R (S7-300/400), PPI, Siemens
Ethernet.
The S7-300/400 MPI Adapter and RK512/3964R - RS485 connection serial link protocols do
not work on the RJ45 port. (2)
Profibus DP protocol: via XBT ZG PDP (4)
(1)Via USB cable: XBT ZG UMP for XBT GT 2ppp and higher, TSX C USB MBP for Smart and
Compact iPC
(2)They are supported on XBT GT (SUB-D connector, XBT GT2 and higher).
(3)Certified ODVA compatibility
(4)Certified by Profibus Foundation
(5)Via the USB FIPIO® module: TSX CUSB FIP
(6)Via the DeviceNet module: XBT ZGDVN
3/15
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Specifications (continued),
services
Magelis® HMI software
Vijeo Designer™ configuration software
Specifications of the Vijeo Designer™ software (continued)
1
2
Operating system
compatibility
Windows XP® Professional
Windows Vista®
Graphic library
Library of vector graphic objects shared with Vijeo® Citect®
Number of objects available
Type
Can be expanded?
> 4000
2D and 3D "industrial" vector images
Yes
Application
validation
Calculation of the maximum memory space occupied by the application.
Verification of the capacity of the target (XBT GT terminal, Magelis® Smart and Compact iPC
HMI edition) configured to run the application:
- Limits of the physical memory
- Available functions
If applicable:
- Disabling of application upload/download
- Direction towards sections of the online help, which will provide tips for optimizing the
application
Interface
languages
Vijeo Designer™ software screens and online help available in English, French, German, Italian,
Simplified Chinese, and Spanish
Documentation
Available in electronic format in English, French, German, Italian, Simplified Chinese, and
Spanish. Not available in hard copy
Self-learning
Multimedia tool (1 hour 30 minutes) in English/French included
User
licenses
Four types of license are available:
- Single: one station
- Group: 3 stations
- Team: 10 stations
- Facility: Unlimited number of stations on one site
Supplied with or without transfer cable(s) for USB port: XBT ZG 935,
see table of references for each Magelis® terminal on page 3/17.
Saving
Recommended (via fax, e-mail or web site www.schneider-electric.us//swregistration), provides
access to additional resources such as application examples, etc.
3
4
Services
Switch2VijeoDesigner:
migration of XBTL 1000
applications
The Switch2VijeoDesigner service offer makes it even easier to migrate XBTL 1000
applications created on XBT F terminals to Vijeo Designer™ applications for use on XBT GT/GK
terminals.
The service provides:
Analysis of the complexity of migration: hardware, software, communication with PLCs, etc.
Analysis of the new functional requirements
Proposal for migration methodology
The possible deliverables include:
Simple conversion
Full migration of complex machines
Migration to SCADA system
Standardization process for multiple machines
For more information on this service offer, please consult your Regional Sales Office.
3/16
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Magelis® HMI software
References
Vijeo Designer™ configuration software
References
All licenses for the Vijeo Designer™ configuration software listed below include a DVD containing:
v Vijeo Designer software, including:
- Copyright-free stand-alone installation of Data Manager
v User documentation in electronic format, including:
- Online help
- User manual for the supported targets
- Setup manual for the different protocols supported
v A multimedia self-learning tool lasting 1 hour 30 minutes in English/French
v The communication protocols described on page 3/15
VJD SUD TGS V50M
1
2
Note: Vijeo Designer V5.1 supports applications created with any version of Vijeo Designer ≥ V4.5.
When updating an earlier application, please contact your Regional Sales Office
for Schneider Electric.
Single-station licenses
Designation
Vijeo Designer™
configuration
software
License type
Application transfer cable included
PC-side port Terminal side
Magelis® XBT/
Magelis® iPC
Reference
Weight
kg
Single
(1 station)
–
– (1)
VJDSNDTGSV51M
0.125
USB
XBT GT/GK/GTW
Magelis® Smart HMI
edition
Magelis® Compact iPC
HMI edition
PC BOX
VJDSUDTGAV51M
0.330
3
4
Multistation licenses
Designation
Vijeo Designer
configuration
software
License type
Number of stations (1)
Reference
Weight
Group
3
VJDGNDTGSV51M
0.125
Team
10
VJDTNDTGSV51M
0.125
Facility
Unlimited number of stations
on one site
VJDFNDTGSV51M
0.125
Runtime licenses
Designation
Reference
Vijeo Designer Runtime Software for Mageilis iPC
VJDSNRTMPC
Weight
0.125
(1)Separate parts: for application transfer cables (PC to Magelis terminal XBT GT/GK/GTW),
see page 1/57.
3/17
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
3/18
4/0
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Contents chapter 4
Services
4.1 - Technical appendices
b Certifications for automation products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/2
1
4.2 - Index
b Product reference index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4/5
2
3
4
4/1
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Technical appendices
Certifications for automation products
EC regulations
Some countries require certain electrical components to undergo certification by law. This
certification takes the form of a certificate of conformity to the relevant standards and is
issued by the official body in question. Where applicable, certified devices must be labelled
accordingly. Use of electrical equipment on board merchant vessels generally implies that
it has gained prior approval (i.e. certification) by certain shipping classification societies.
1
Abbrev. name
CSA
C-Tick
GOST
UL
Abbrev. name
IACS
ABS
BV
DNV
GL
LR
RINA
RMRS
RRR
2
3
Certification body
Canadian Standards Association
Australian Communication Authority
Scientific research institute for GOST standards
Underwriters Laboratories
Classification society
International Association of Classification Societies
American Bureau of Shipping
Bureau Veritas
Det Norske Veritas
Germanischer Lloyd
Lloyd’s Register
Registro Italiano Navale
Russian Maritime Register of Shipping
Russian River Register
Country
Canada
Australia, New Zealand
CIS, Russia
USA
Country
International
USA
France
Norway
Germany
UK
Italy
CIS, Russia
The tables below provide an overview of the situation as at 01/02/2009 in terms of
which certifications (listed next to their respective bodies) have been granted or are
pending for our automation products. Up-to-date information on which certifications
have been obtained by products bearing the Schneider Electric brand can be viewed
on our web site: www.schneider-electric.us/
4
Product certifications
Certifications
C-Tick
Certified
Certification
pending
Hazardous
locations
Class I, div 2 (1)
UL
USA
Advantys™ OTB
Advantys™ STB
Advantys™ Telefast® ABE 7
ConneXium™
Magelis® iPC, Magelis XBT GTW (3)
Magelis® XBT GT
Magelis® XBT GK
Magelis® XBT N/R
Magelis® XBT RT
Modicon® M340™
Modicon® Momentum™
Modicon® Premium™
Modicon® Quantum™
Modicon® Quantum Safety
Modicon® TSX Micro™
Phaseo®
(3) (5)
(6)
Twido®
CSA
Canada
ACA
Australia
GOST
CIS, Russia
(2)
(2)
(2)
(2)
(2)
(6)
ATEX
Europe
FM
Cat. 3 G
(2)
UL
CSA/UL
CSA
CSA/UL
CSA/UL
CSA
CSA
FM (2)
CSA
TÜV Rheinland
(2)
Cat. 3 G-D
Cat. 3 G-D
Cat. 3 G-D
SIL 2 (4)
CSA/UL (6)
(1)Hazardous locations: According to UL 1604, CSA 22.2 N° 213 and FM 3611, certified
products are only approved for use in hazardous locations categorized as Class I, division 2,
groups A, B, C and D, or in non-classified locations.
(2)Depends on product; please visit our web site: www.schneider-electric.us/
(3)North American certification cULus (Canada and USA)
(4) According to IEC 61508. Certified by TÜV Rheinland for integration into a safety function of
up to SIL2 level.
(5)Except for power supplies and function modules in the Universal range: UL certification
pending
(6) Except for AS-Interface module TWD NOI 10M3; e only.
Specific certifications
BG
Germany
SIMTARS
Australia
AS-Interface Europe
®
4/2
USA, Canada
Safety module TSX DPZ 10D2A (Modicon TSX Micro™)
Safety modules TSX PAY 262/282 (Modicon Premium)
Modicon TSX Micro automation platform
Modicon Premium (PL7) automation platform
Master module TWD NOI 10M3 (Twido)
Master module TSX SAZ 10 (Modicon TSX Micro)
Master modules TSX SAY 1000 (Modicon Premium)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Technical appendices
Certifications for automation products
EC regulations
Merchant navy certifications
Shipping classification societies
1
Certified
Certification
pending
ABS
BV
DNV
GL
LR
RINA
RMRS
RRR
USA
France
Norway
Germany
UK
Italy
CIS
CIS
Advantys™ OTB
(1)
Advantys™ STB
Advantys™ Telefast® ABE 7
ConneXium™
Magelis® iPC, Magelis XBT GTW
Magelis® XBT GT
Magelis® XBT GK
Magelis® XBT N/R
Magelis® XBT RT
(2)
Modicon® M340™
Modicon® Momentum™
Modicon® Premium™ (3)
(2)
Modicon® Quantum™
Modicon® TSX Micro™
Phaseo®
Twido®
2
(2)
3
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(4)
(4)
(4)
(2)
4
(1)Also covers US Navy requirements ABS-NRV part 4.
(2)Depends on product; please visit our web site: www.schneider-electric.us/.
(3)Modicon Premium, also certified by KRS (Korean Register of Shipping).
(4)Except for: Compact bases TWD LCpp40DRF, Extreme base TWD LEDCK1,
communication modules 499 TWD 01100, TWD NCO1M and TWD NOI 10M3 and tap
junctions TWD XCA ISO/T3RJ.
Certifications pending for I/O extension modules (discrete TM2 D and analog TM2 A).
EC regulations
European Directives
The open nature of the European markets assumes harmonization between the
regulations set by different European Union member states.
European Directives are texts whose aim is to remove restrictions on free circulation
of goods and which must be applied within all European Union states.
Member states are obligated to incorporate each Directive into their national
legislation, while at the same time withdrawing any regulation that contradicts it.
Directives - and particularly those of a technical nature with which we are concerned
- merely set out the objectives to be fulfilled (referred to as "essential requirements").
The manufacturer is obligated to implement any and all measures to ensure that its
products meet the requirements of each Directive that applies to its equipment.
As a general rule, the manufacturer certifies compliance with essential requirements
of the Directive(s) that apply to its product by applying a e mark. The e mark has
been applied to our products where applicable.
Significance of the e mark
b The appearance of a e mark on a product indicates the manufacturer's
certification that the product conforms to the relevant European Directives; this is a
prerequisite for placing a product which is subject to the requirements of one or more
Directives on the market and for allowing its free circulation within European Union
states.
b The e mark is intended for use by those responsible for regulating national
markets.
Where electrical equipment is concerned, conformity to standards indicates that the
product is fit for use. Only a warranty by a well-known manufacturer can provide
assurance of a high level of quality.
As far as our products are concerned, one or more Directives are likely to apply in
each case; in particular:
b The Low Voltage Directive (2006/95/EC)
b The Electromagnetic Compatibility Directive (2004/108/EC)
b The ATEX e Directive (94/9/EC)
4/3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
1
2
3
4
4/4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Product reference index
4
490 NTW 000 02
490 NTW 000 05
490 NTW 000 12
490 NTW 000 40
490 NTW 000 80
9
990 NAA 263 20
MPC YK2 0MNT KIT
1/59
1/59
1/59
1/59
1/59
1/56
1/65
A
ABL 7RM2401
ABL 7RM24025
1/59
1/59
B
BMX XCA SB H018
BMX XCA USB H045
1/56
1/56
H
HMI STO511
HMI STO512
HMI STU655
1/12
1/12
1/12
M
MPC 21 NAJ 20T
MPC FN0 2NAX 00N
MPC FN0 2NDX 00N
MPC FN0 5MAX 00H
MPC FN0 5MAX 00N
MPC FN0 5MAX 00V
MPC FN0 5NAX 00N
MPC FN0 5NDX 00N
MPC HN0 2NAX 00N
MPC HN0 5MAX 00H
MPC HN0 5MAX 00N
MPC HN0 5NAX 00N
MPC HN0 5NBX 00N
MPC HN0 5NDX 00N
MPC HN0 JMAX 00V
MPC KN0 2NAX 00H
MPC KN0 2NAX 00N
MPC KT1 2NAX 00H
MPC KT1 2NAX 00N
MPC KT2 2MAX 20N
MPC KT2 2NAX 20N
MPC KT5 5MAX 20H
MPC KT5 5MAX 20L
MPC KT5 5MAX 20N
MPC KT5 5MAX 20V
MPC KT5 5NAX 20H
MPC KT5 5NAX 20N
MPC KT5 5NDX 20H
MPC KT5 5NDX 20N
MPC NB5 0NAN 00N
MPC SN0 1NAJ 00H
MPC SN0 1NAJ 00T
MPC SN0 1NDJ 00H
MPC SN0 1NDJ 00T
MPC ST1 1NAJ 00H
MPC ST1 1NAJ 00T
MPC ST1 1NDJ 00T
MPC ST2 1NAJ 20T
MPC ST2 1NAJ 20T
MPC ST2 1NDJ 20T
MPC ST5 2NAJ 20H
MPC ST5 2NAJ 20T
MPC ST5 2NDJ 20T
MPC ST5 2NDJ 20T
MPC YB2 0NNN 00N
MPC YB5 0NNN 00N
MPC YFR AM05 12N
MPC YFR AM10 24N
MPC YFR AM20 48N
MPC YK0 5RAM 512
MPC YK1 0MNT KIT
MPC YK1 0SPS KIT
2/22
2/41
2/41
2/41
2/41
2/41
2/41
2/41
2/42
2/42
2/42
2/42
2/42
2/42
2/42
2/40
2/40
2/20
2/20
2/20
2/20
2/23
2/20
2/20
2/20
2/20
2/20
2/23
2/20
2/23
2/20
2/20
2/43
2/48
2/49
2/54
2/39
2/39
2/39
2/39
2/9
2/9
2/9
2/22
2/9
2/9
2/9
2/9
2/22
2/9
2/43
2/44
2/48
2/49
2/44
2/44
2/44
2/44
2/10
2/21
1/53
2/10
2/21
1/53
2/10
2/21
2/45
MPC YK2 0SPS KIT
MPC YK2 2RA1 024
MPC YK5 0MNT KIT
MPC YK5 0SPS KIT
MPC YK50 SPS KIT
MPC YK9 0MNT KIT
MPC YK9 0SPS KIT
MPC YK90 SPS KIT
MPC YN0 0CDW 30N
MPC YN0 0CF1 00N
MPC YN0 0CF2 00N
MPC YN0 0CF4 00N
MPC YN0 0CFE 00N
MPC YN0 0FPF R1N
MPC YN0 0FPF R2N
MPC YN0 0FPF R3N
MPC YN0 0FSE 00N
MPC YN0 0HDS 30N
MPC YN0 0MKT 00N
MPC YN0 0MSD 00N
MPC YN0 0PWA CTE
MPC YN0 0RAI D0N
MPC YN1 1CF1 10H
MPC YN1 1CF1 10T
MPC YN1 1CF2 10H
MPC YN1 1CF2 10M
MPC YN5 2CF2 20H
MPC YN5 2CF2 20T
MPC YNK 2MSD 20N
MPC YNK 2SHD 20N
MPC YT5 0NAN 00N
MPC YT5 0NNN 00N
MPC YT9 0NAN 00N
MPC YT9 0NNN 00N
S
SR2 CBL 08
STB XCA 4002
T
TM2 ALM 3LT
TM2 AMI 2HT
TM2 AMI 2LT
TM2 AMI 4LT
TM2 AMI 8HT
TM2 AMM 3HT
TM2 AMM 6HT
TM2 AMO 1HT
TM2 ARI 8HT
TM2 ARI 8LRJ
TM2 ARI 8LT
TM2 AVO 2HT
TM2 DAI 8DT
TM2 DD0 16TK
TM2 DD0 16UK
TM2 DD0 32TK
TM2 DD0 32UK
TM2 DD0 8TT
TM2 DD0 8UT
TM2 DDI 16DK
TM2 DDI 16DT
TM2 DDI 32DK
TM2 DDI 8DT
TM2 DMM 24DRF
TM2 DMM 8DRT
TM2 DRA 16RT
TM2 DRA 8RT
1/53
2/10
2/21
1/53
2/10
2/21
2/45
2/10
2/21
1/53
2/10
2/21
2/10
2/21
1/53
2/45
2/54
2/54
2/45
2/44
1/53
2/10
1/53
2/10
1/53
2/10
1/53
2/10
2/44
2/44
2/44
2/44
2/44
2/44
2/44
2/10
2/21
2/45
2/44
1/53
2/10
2/10
2/10
2/39
1/53
2/10
1/53
2/10
2/21
2/21
2/54
2/43
2/44
2/48
2/49
2/54
2/43
2/48
2/49
1/14
1/20
1/22
1/56
1/65
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
2/55
TSX CUS B 485
TSX PCX 1031
TSX CUS BFIP
TSX CUS BMBP
TSX PCX 1031
V
VJD FND TGS V51M
VJD GND TGS V51M
VJD SND TGS V51M
VJD SND TMS V13M
VJD SNR TMPC
VJD SUD TGA V51M
VJD SUD TMS V13M
VJD TND TGS V51M
VJL SMD BTL V26M
VJL SMD RTL V26M
VW3 A8 306
VW3 A8 306 TF10
VW3 A8 306 D30
VW3 A8 306 R30
X
XBL YGK2
XBL YGK5
XBL YN00
XBL YN01
XBL YR00
XBL YR01
XBL YRT00
XBL YRT01
XBT GC1100T
XBT GC1100U
XBT GC2120T
XBT GC2120U
XBT GC2230T
XBT GC2230U
XBT GH 2460
XBT GK 2120
XBT GK 2330
XBT GK 5330
XBT GT 1105
XBT GT 1135
XBT GT 1335
XBT GT 2110
XBT GT 2120
XBT GT 2130
XBT GT 2220
XBT GT 2330
XBT GT 4230
XBT GT 4330
XBT GT 4340
XBT GT 5230
XBT GT 5330
XBT GT 5340
XBT GT 6330
XBT GT 6340
XBT GT 7340
XBT GTW 450
XBT GTW 652
XBT GTW 750
XBT GTW 750
XBT N200
XBT N400
XBT N401
XBT N410
XBT NSR2
XBT NU400
XBT R400
XBT R410
XBT R411
XBT RT500
XBT RT511
XBT YGH2
XBT Z3002
XBT Z3004
XBT Z9008
XBT Z9018
XBT Z908
1/21
1/56
1/59
1/59
1/65
3/17
3/17
3/17
3/7
3/17
3/17
3/7
3/17
2/23
2/23
1/59
1/59
1/58
1/56
1/59
1/65
1/54
1/54
1/14
1/14
1/16
1/16
1/20
1/20
2/55
2/55
2/55
2/55
2/55
2/55
1/51
1/51
1/51
1/51
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/50
1/52
1/52
2/22
1/52
1/14
1/14
1/14
1/14
1/13
1/14
1/16
1/16
1/16
1/20
1/20
1/54
1/21
1/53
1/21
1/56
1/59
1/56
1/59
1/18
1/23
1/59
XBT Z915
XBT Z918
XBT Z925
XBT Z926
XBT Z935
XBT Z938
XBT Z945
XBT Z968
XBT Z9680
XBT Z9681
XBT Z9710
XBT Z9711
XBT Z9715
XBT Z9720
XBT Z9721
XBT Z973
XBT Z9730
XBT Z9731
XBT Z9732
XBT Z9733
XBT Z9734
XBT Z9740
XBT Z9743
XBT Z9780
XBT Z9782
XBT Z980
XBT Z988
XBT Z9980
XBT Z9982
XBT ZG FIX
XBT ZG43
XBT ZG45
XBT ZG45B
XBT ZG46
XBT ZG47
XBT ZG51
XBT ZG52
XBT ZG54
XBT ZG55
XBT ZG56
XBT ZG57
XBT ZG58
XBT ZG59
XBT ZG5H
XBT ZG60
XBT ZG61
XBT ZG62
XBT ZG64
1/17
1/21
1/55
1/66
1/17
1/22
1/56
1/65
1/21
1/66
1/17
1/21
1/66
1/17
1/18
1/22
1/23
1/56
1/65
1/21
1/17
1/18
1/22
1/23
1/56
1/65
1/17
1/22
1/17
1/18
1/22
1/23
1/56
1/65
1/17
1/22
1/56
1/65
1/17
1/22
1/56
1/65
1/22
1/56
1/18
1/22
1/18
1/22
1/58
1/18
1/22
1/18
1/22
1/58
1/18
1/22
1/58
1/23
1/58
1/23
1/58
1/18
1/22
1/57
1/67
1/23
1/57
1/22
1/23
1/56
1/59
1/65
1/22
1/56
1/22
1/23
1/57
1/17
1/22
1/56
1/22
1/23
1/56
1/59
1/22
1/56
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/54
1/53
1/53
1/53
1/53
XBT ZG65
XBT ZG66
XBT ZG68
XBT ZG69
XBT ZG909
XBT ZG915
XBT ZG919
XBT ZG925
XBT ZG929
XBT ZG9292
XBT ZG935
XBT ZG939
XBT ZG946
XBT ZG949
XBT ZG9721
XBT ZG9722
XBT ZG973
XBT ZG9731
XBT ZG9740
XBT ZG9771
XBT ZG9772
XBT ZG9773
XBT ZG9774
XBT ZG9775
XBT ZG9777
XBT ZG9778
XBT ZG979
XBT ZG989
XBT ZGADT
XBT ZGAUX
XBT ZGCCAN
XBT ZGCLP1
XBT ZGCLP2
XBT ZGCLP3
XBT ZGCNC
XBT ZGCO1
XBT ZGCO2
XBT ZGCO3
XBT ZGCO4
XBT ZGCOM1
XBT ZGDVN
XBT ZGESD
XBT ZGESGD
XBT ZGHL10
XBT ZGHL3
XBT ZGHSTP
XBT ZGI232
XBT ZGI485
XBT ZGJBOX
XBT ZGM128
XBT ZGM256
XBT ZGNSTP
XBT ZGPDP
XBT ZGPEN
XBT ZGPWS1
XBT ZGPWS2
XBT ZGUMP
XBT ZGUSB
XBT ZGWMKT
XBT ZN01
XBT ZN02
XBT ZN999
XBT ZNCO
XBT ZR01
XBT ZR02
XBT ZRCO
XBT ZRT PW
XBT ZRT999
1/53
1/53
1/53
1/53
1/55
1/66
1/55
1/66
1/67
1/58
1/67
1/55
1/66
1/55
1/66
1/58
1/23
1/58
1/67
1/58
1/66
1/67
1/57
1/58
1/66
1/67
1/57
1/66
1/67
1/66
1/57
1/66
1/57
1/57
1/57
1/66
1/66
1/57
1/66
1/57
1/66
1/66
1/67
1/54
2/10
1/54
2/55
1/54
1/54
1/54
1/54
1/54
1/64
1/54
1/65
1/54
1/64
1/54
1/65
1/66
1/59
1/54
1/53
1/51
1/51
1/54
1/55
1/55
1/51
1/53
2/10
1/53
2/10
1/53
1/59
1/54
1/54
1/54
1/59
1/54
1/53
1/14
1/14
1/14
1/14
1/16
1/20
1/16
1/20
1/16
1/20
1/21
1/20
1/21
4/5
1
2
3
4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
ART. 821230
8001 Knightdale Blvd.
Knightdale, NC 27545
Tel: 919-266-3671
The information and dimensions in this catalog are provided for the convenience of our customers.
While this information is believed to be accurate, Schneider Electric reserves the right to make
updates and changes without prior notification and assumes no liability for any errors or omissions.
19 Waterman Avenue
Toronto, Ontario M4B 1Y2
Tel: 416-752-8020
Design: Schneider Electric
Photos: Schneider Electric
© 2010 Schneider Electric. All rights reserved.
MKTED206071EN-US
http://www.schneider-electric.us/
Schneider Electric USA, Inc.
06/2010
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2010
Magelis® Human/Machine Interfaces
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Download PDF