East Coast Datacom RDS Router Delay Simulator Operations manual

Below you will find brief information for Router Delay Simulator RDS. This unit is a device that allows you to simulate network delays by connecting two Routers or DTE devices within proximity of each other. It provides selectable data rates of up to 2.048 Mbps. This allows you to test and preconfigure Routers for reliable network operation. It has status LED's, Dip Switches for configuration, and a three year warranty.

PDF Download
Document
Router Delay Simulator RDS Operations Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Simulates network delays
  • Connects two Routers or DTE devices
  • Data rates up to 2.048Mbps
  • User selectable delay times
  • Status LEDs
  • Dip switches for configuration
  • Three year warranty

Frequently asked questions

The Router Delay Simulator (RDS) allows Router(DTE)-to-Router(DTE) connections at data rates up to 2.048Mbps while simulating network delays. This allows users to test and pre-configure Routers (with software applications) and other critical DTE equipment for reliable network operation while simulating network delay times.

The delay time is controlled via Dip Switch S2. The delay time range is from 5ms to 1.280 seconds. Delay time is not effected by clock rate.

Yes, the RDS can be cascaded with multiple RDS units to provide long delay times. This is accomplished via a cross over cable from the first clock source and setting the remaining RDS units to external clock on one of the selected ports.
Preparing document for printing…
0%