CYP | PU-107 | Specifications | CYP PU-107 Specifications

PU-1107-KIT
Pure Digital v1.3 HDMI over
Single CAT6 Extender Set with
Repeater Function
OPERATION MANUAL
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 August 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
 To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision
History

Version No
V1
Date
20100412
Summary of Change
Preliminary release
Table of Contents
1.
2.
3.
4.
5.
6.
7.
Introduction................................................................................... 1
Applications.................................................................................. 1
Package Contents....................................................................... 1
System Requirements................................................................... 1
Features......................................................................................... 2
Specifications............................................................................... 3
Operation Controls and Functions.............................................. 4
7.1 Front Panel..................................................................... 4
7.2 Rear Panel..................................................................... 5
8. Connection and Installation . .................................................... 6
9. Acronyms.................................................................................... 7
1. Introduction
The HDMI 1.3 transmitter and receiver over ONE CAT 6 is a tool for extending
your HDMI signal over long distances to a compatible display. Instead of
using expensive HDMI cables, your existing CAT 6 cables/sockets can be
utilized to perform advanced functions like transferring Deep Color (12 bits/
color) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) digital audio, with a bandwidth up to 225MHz. The
HDMI 1.3 Transmitter and receiver, over ONE CAT6 extender is your substantial
HDMI extender tool.
2. Applications
 Distribute HDMI signals over long distances
 Showroom display
 Hypermarket display
 Lecture room display
3. Package Contents
 HDMI v1.3 Transmitter x 1
 HDMI v1.3 Receiver x 1
 5V DC Power Supply adaptor x 2
 Operation Manual x 1
4. System Requirements
Input HDMI source equipment and output HDMI display with connection
cables and one CAT6 cable.
1
5. Features
 HDMI 1.3, HDCP 1.1 and DVI1.1 compliant.
 Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/






color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) Digital audio .
Uses one CAT-6 cable for data/DDC transmission.
Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
Cable testing showed that with 1080p 8bit or 12bit resolution the HDMI input source can be 20meters away.
Cable testing showed that with 1080p 8bit resolution the HDMI output device can be 15meters away and with 1080p 12bit resolution it can be 10 meters away.
When transmitting a signal in 1080p 8bit resolution the CAT6 operating distance is 45 meters, and when the signal is in 12bit resolution the CAT6 operating distance is 10meters.
Supports xvYCC
2
6. Specifications
Frequency Bandwidth
2.25Gbps (single link)
Transmitter
Input/Output Ports
1 x HDMI Female port/1 x CAT6
Receiver
Output/Input Ports
1 x HDMI Female port/1 x CAT6
Power Supply
5V/1A DC (US/EU standards, CE/FCC/UL certified)
ESD Protection
Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm)
78.5 (W) X 102 (d) X 30 (H) / Tx
78.5 (W) x 72 (D) x 30 (H) / Rx
Weight(g)
182 / Tx
90 / Rx
Chassis Material
Aluminum
Silkscreen Color
Silver
Power Consumption
TX: 3.5W RX:2W
Operating Temperature
0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature
-20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity
20~90% RH (non-condensing)
3
7. Operation Controls and Functions
7.1 Front Panel
CH-1107TX
HDMI INPUT
①
①
②
③
CH-107RX
DC 5V
DC 5V
②
②
HDMI OUT
③
HDMI INPUT: This slot is where you connect the HDMI or DVI output
port of your source equipment such as DVD/Blu Ray players or Set-top-
boxes with an HDMI cable or link up with another receiver unit from the same family to extend a signal over long distances.
DC 5V: This is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC outlet.
HDMI OUTPUT: This slot is where you connect the HDMI or DVI input port of your display such as an HDTV or HD monitor or link up with another receiver unit from the same family to extend a signal over long distances.
4
7.2 Rear Panel
CH-1107TX
EDID
CH-107RX
CAT6 OUT
CAT6 IN
②
②
10 Bit
TV/STD 8 Bit
12 Bit
①
① EDID Control Switcher: Switch the EDID between STD and TV. Switch to
STD to use the built-in EDID or switch to TV to use the TV’s EDID. The default factory setting is TV, leave as is when the display is working properly.
Note: 1.When EDID is switched to STD the unit will use its built-in EDID which supports:
Video → 1080p 8-bit, 10-bit or 12-bit (max)
Audio → PCM 2CH
2.The EDID selection will only be activated when the unit is re-plugged and powered on.
② CAT6 OUT/IN: Connect the CAT6 output of the transmitter with the CAT6 input of the receiver.
Note: A. This system was tested with CAT-6E/23AWG cables, so if using cables of another type, results may vary.
B. Cable distance tested with PS3 120G & 40" Samsung LED 12 bit LCD TV.
C.The figures provided in this manual are for reference only; actual performance may depend on the source and display used along with the type cable.
5
8. Connection and Installation
CAT6
Cable
DVD
CH-1107TX
CH-107RX
6
HDMI
HDMI
HDMI
Cable
HDMI
HDMI
HDMI
Cable
LCD TV
A
Acronyms
Acronym
Complete Term
CAT6
Category 6 Cable
EDID
Extended display identification data
HDMI
High-Definition Multimedia Interface
7
www.cypeurope.com
Download PDF