HIGHER PROFITS THROUGH LOWER ENERGY USAGE. Master-Bilt’s Energy Saver program highlights many refrigeration products, options and features that reduce your store’s electricity usage and add to your bottomline. Product/Feature Energy-Saving Function Where Used ENERGY STAR® qualification LED lighting Numerous models Cabinet refrigeration systems designed for optimum energy efficiency and may be eligible for rebate programs. LEDs use less electricity than fluorescent lights with electromagnetic ballasts and introduce less heat into the refrigerated space which reduces the workload on the refrigeration system’s compressor. The less the compressor operates, the more energy is saved. LEDs also last up to 50,000 hours. MBWA-1 digital alarm/ Door open alarm prevents door from being left open. light management Optional light management system automatically turns off system lights after a programmed interval. Glass Sentry II The Glass Sentry II anti-sweat control module is designed to save energy by turning off glass door and frame heaters when no door heat is necessary. EC motors on fans Amount of torque and current required to start ECMs is low, making them more efficient. ECMs run cooler, reducing heat load to refrigerated space which makes the compressor run less. 4" thick walk-in panels Standard 4-inch panel with R-32 rating meets federal EISA requirements for freezers and surpasses R-25 requirements for coolers. 5" and 6" thick walk-in Thickness of panels produces a higher R-factor and energy panels efficiency which surpasses federal EISA requirements. 6-inch panels also meet “LEED 2009 for Retail: New Construction and Major Renovations” requirements. Low energy or energy V-series doors have a PVC thermal break between the free standard walk-in door and frame which minimizes heat transfer between entry doors the refrigerated space and the outside. Cooler doors don't require anti-sweat heat and freezer doors only require a low wattage heater in the frame. Scroll compressors Up to 20% increase in efficiency vs. reciprocating compressors. Scrolls are also 50% more reliable than reciprocating types. See the complete Energy Saver list. Standard in numerous cabinets and optional in walk-ins An option on walk-in coolers and freezers An option on glass door walk-in coolers and freezers Standard on single phase walk-in evaporator coils and numerous cabinets Standard thickness on all walk-in coolers and freezers For the latest product information and specifications go to www.master-bilt.com/products. An option on walk-in coolers and freezers Standard on walk-in coolers and freezers 908 Highway 15 North • New Albany, MS 38652 Phone: 800-647-1284 • Fax: 800-232-3966 www.master-bilt.com Optional on walk-in cooler and freezer refrigeration systems and rack systems Due to continuous product enhancements, we reserve the right to change specifications without notice. 1465-3/15-web ©2015 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A. MAKE THE MOST OF YOUR SALES SPACE FROM FRONT OF THE HOUSE TO BACK. For all your merchandising and cold storage needs, Master-Bilt supplies the right refrigeration MASTER CONTROLLER REVERSE CYCLE DEFROST SYSTEM The Master Controller Reverse Cycle Defrost system is an optional electronic controller for Master-Bilt walk-in cooler and freezer refrigeration systems. It completely removes frost build-up in coils and works much faster than electric defrost heaters. Its patented design also saves up to 27% more energy than an all-mechanical system. RACK REFRIGERATION SYSTEMS Reduce energy usage and in-store noise level with a remote rack refrigeration system. A rack system, typically roof-mounted, supplies refrigeration for inside equipment and usually requires only a single roof penetration point. ENDLESS MERCHANDISERS Endless models can be used as stand-alone units or combined for a continuous line up for as many cooler and/or freezer doors as needed. Choose from remote or self-contained refrigeration systems to fit sales space requirements. for markets of all sizes. Our equipment is designed to be energy-saving, durable and easy to install. ENTER BACK Just a few examples: • Parallel rack refrigeration systems save 20% or more in energy usage compared to a single compressor unit. • Most of our self-contained glass door merchandisers are ENERGY STAR® qualified and meet Department of Energy requirements. • Master-Bilt can supply a walk-in that meets WALK-IN COOLERS & FREEZERS From storage to merchandising, Master-Bilt walk-in coolers and freezers provide the right amount of temperature-controlled space. GLASS DOOR MERCHANDISERS Make the most of sales space and capture more purchases from beverages, frozen food and more with Master-Bilt’s diverse line of glass door merchandisers, most of which are ENERGY STAR® qualified. “LEED 2009 for Retail: New Construction and Major Renovations” prescriptives. • Walk-ins and merchandisers are made to handle heavy day-to-day usage. • Walk-ins feature cam-lock construction for easy assembly and future expansion as needed. BAKERY & DELI MERCHANDISERS These merchandisers fit the bill for highly effective display of meats, cheeses, desserts and pastries. OPEN DISPLAY MERCHANDISERS Offering the ultimate in easy product access, open air merchandisers are available in both high-capacity vertical models and low profile point-of-purchase units. COUNTERTOP MERCHANDISERS Boost impulse sales for beverages, and frozen novelties by placing these mobile merchandisers in high traffic areas. NOVELTY MERCHANDISERS Available in a wide variety of sizes and in curved or flat lid, these models are ideal for showcasing ice cream, popsicles and much more. Standard casters make it easy to relocate throughout a store as needed.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project