Ectaco | Partner EEL400T | User manual | Ectaco Partner EEL400T User manual

ECTACO Partner® B–3
Travel Phrasebook
USER MANUAL
Ectaco, Inc. assumes no responsibility for any damage or loss resulting from the use
of this manual.
Ectaco, Inc. assumes no responsibility for any loss or claims by third parties which
may arise through the use of this product.
Ectaco, Inc. assumes no responsibility for any damage or loss caused by deletion of
data as a result of malfunction, repairs, or battery replacement. Be sure to back up
all important data on other media to protect against its loss.
The contents of this manual are subject to change without notice.
No part of this manual shall be reproduced, stored in a retrieval system, or
transmitted by any means, electronic, mechanical, photocopying, recording, or
otherwise, without permission from Ectaco, Inc.
Partner® is a registered trademark of ECTACO, Inc.
Vector Ultima™ is a trademark of ECTACO, Inc.
© 1990-2005 ECTACO, Inc., Long Island City, NY, 11106 USA. All rights reserved.
© 2000 Franklin Electronic Publishers, Inc.
Copyright © 2000 by Audible, Inc. All rights reserved.
simpliWrite® is the property of ART, Advanced Recognition Technologies, Copyright
© 1999.
Program Copyright © 2000 Intellisync for eBookMan, Puma Technology, Inc.
(d/b/a PUMATECH, Inc.) All rights reserved.
eBookMan is a registered trademark of Franklin Electronic Publishers, Inc.
AudibleReady is a registered trademark of Audible, Inc.
Puma Technology, the Puma Technology logo, Intellisync, and the Intellisync logo
are trademarks of Puma Technology, Inc. d/b/a PUMATECH, Inc. that may be
registered in some jurisdictions.
iambic® is a registered trademark of Iambic Partners.
simpliWrite® software is licensed by ART, Advanced Recognition Technologies,
Copyright (c) 2000. ART DISCLAIMS ALL WARRANTIES WITH RESPECT TO THE
USE OF SUCH SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
AudibleReady is a trademark of Audible, Inc. Copyright © 2000 by Audible, Inc. All
rights reserved.
This software is the property of Audible, Inc. Possession and use of this software
must conform strictly to the license agreement between Franklin and Audible, Inc.,
and possession does not convey any rights to disclose, reproduce or permit others to
use the software without the specific written authorization of Audible, Inc.
ECTACO Partner® B-3 Travel Phrasebook
User Manual
CONTENTS
INTRODUCTION-----------------------------------------------------6
GETTING STARTED -----------------------------------------------8
General View ---------------------------------------------------------------- 8
Power Supply ---------------------------------------------------------------- 8
MultiMedia Card ------------------------------------------------------------ 9
Control Pad ---------------------------------------------------------------- 10
Main Menu ----------------------------------------------------------------- 11
Control Wheel ------------------------------------------------------------- 11
Opening and Closing Programs -------------------------------------- 12
On-screen Keyboard----------------------------------------------------- 12
SETUP---------------------------------------------------------------- 12
Interface Language1 ----------------------------------------------------Select Date ----------------------------------------------------------------Select Time ---------------------------------------------------------------Volume ---------------------------------------------------------------------Password ------------------------------------------------------------------Sounds ---------------------------------------------------------------------Pen Language ------------------------------------------------------------Shutoff Time --------------------------------------------------------------Time Format, Date Format, Numbers ------------------------------Week Start ----------------------------------------------------------------Double-click ----------------------------------------------------------------
12
12
12
12
13
13
13
13
13
13
13
APPLICATIONS --------------------------------------------------- 14
Phrasebook ---------------------------------------------------------------Self-Learning Mode (Flash Cards) ----------------------------------Address Book-------------------------------------------------------------Calculator ------------------------------------------------------------------Date Book ------------------------------------------------------------------
1
where available
4
14
15
16
17
17
ECTACO Partner® B-3 Travel Phrasebook
User Manual
Memo Book ---------------------------------------------------------------Music Player --------------------------------------------------------------ToDo Book ----------------------------------------------------------------Voice Memo---------------------------------------------------------------Currency Conversion ---------------------------------------------------Local Time-----------------------------------------------------------------Metric Conversion -------------------------------------------------------World Time -----------------------------------------------------------------
18
18
19
19
20
20
20
20
PC COMMUNICATION------------------------------------------- 21
5
ECTACO Partner® B-3 Travel Phrasebook
User Manual
INTRODUCTION
Congratulations on purchasing ECTACO Partner® B-3! You are now the owner of the
versatile, handheld electronic device which will serve you as a comprehensive
phrasebook, personal organizer, and a music player.
ECTACO Partner® B-3 features:
™ Total of 14,000 travel oriented phrases
™ Human pronunciation of phrases in the phrasebook
™ Self-Learning Mode (Flash Cards)
™ Music Player (additional MMC required)
™ Address Book
™ Calculator
™ Date Book with audio reminders
™ Memo Book
™ ToDo Book
™ Voice Memo
™ Currency and metric converters
™ Local and World time with map illustration
™ Bilingual interface2
™ High-speed data exchange and synchronization with PC
™ Password protection
™ Search function
™ High resolution touch screen
™ MMC slot
™ USB port
™ Headphone jack
This model features a break-through combination of two input methods − a welldesigned on-screen keyboard and a high-resolution touch-sensitive handwriting area
which makes character input simple, fast and accurate.
2
where available
6
ECTACO Partner® B-3 Travel Phrasebook
User Manual
♦ Note: As continuous efforts are made by the manufacturer to ensure better
quality and performance of the product, some characteristics or the design of the
actual device you purchased may slightly differ from those described in this manual.
7
ECTACO Partner® B-3 Travel Phrasebook
User Manual
GETTING STARTED
General View
The general view and external appliances of ECTACO Partner® B-3 are shown
below:
• Press the On/Off button to turn the device on. When the device is on, press and
hold the On/Off button for approximately two seconds to turn on the backlight. Press
and hold the On/Off button once again to turn the backlight off.
• Use the connecting cable provided in the standard package to connect ECTACO
Partner® B-3 to the LS-101 loudspeaker.
• Tap the screen with the supplied pointing device called the stylus which, when not
in use, is conveniently kept in a special slot at the side of the device's back panel.
• In most windows or dialog boxes, tap OK or Done to accept changes or Cancel to
exit without saving any changes.
♦ Note: If, for some reason, using the stylus does not provide the desired effect,
you may need to recalibrate the screen (see Launcher Menu on page 11).
Power Supply
ECTACO Partner® B-3 is powered by two AAA (LR03) batteries. ECTACO Partner®
LS-101 loudspeaker is powered by four AAA (LR03) batteries. If the battery power
runs too low, the unit will start up when you press the On/Off button but will then shut
off automatically. When this happens, please replace the batteries immediately to
avoid the risk of losing user data.
8
ECTACO Partner® B-3 Travel Phrasebook
User Manual
♦ Note: Make sure the battery is inserted in the battery compartment before
connecting your device to a PC.
How to replace the batteries
• Press the On/Off button to turn the device off.
• Make sure the device is not on a hard surface – if the On/Off button is pressed
accidentally, user data may be lost.
♦ Note: To avoid data loss, never try to remove the batteries from the device
when the power is on. If you experience difficulties turning the device off, press the
RESET button on the back of the device and restart the system.
• Remove the battery compartment cover.
• Remove the used batteries and replace them with new ones.
♦ Note: Do not mix old and new batteries.
• Make sure to place the batteries according to the polarity marks (+ -) inside the
battery compartment.
• Put back the battery compartment cover. Make sure the cover sits in place
properly.
♦ Note: You have one minute to replace the batteries without risk of losing the data
stored in RAM. Do not exceed the one-minute limit! Neither the manufacturer nor
the dealer may be held responsible for the loss of user data.
MultiMedia Card
ECTACO Partner® B-3 MultiMedia Card is included in the standard package. Please
insert the card into the MMC slot before you turn the device on.
♦ Note: Always make sure the device is turned off before installing or removing
the MMC. Use the On/Off button to turn the device off.
Installing MMC
• Put your thumb on the MMC slot cover and slide it off.
• Slide the MMC into the compartment with the contacts face up and the label face
down. Push the card gently until it clicks into place.
• Snap the cover back on and then turn on the device.
9
ECTACO Partner® B-3 Travel Phrasebook
User Manual
The operating system installation will take about 2 minutes.
• To perform screen calibration, tap the center of the target with the stylus. Repeat
the process with three more targets, which will appear one after another.
Removing MMC
• To remove the MMC, first turn the device off. Push the card in slightly. You will
hear a click and the card will pop out.
Soft Reset
• Tap
to go to the Main Menu and then tap
to open the Launcher Menu.
• Tap Restart system on the Launcher Menu.
• In the Ready for Restart screen, tap Restart now.
If the Launcher Menu is not accessible, use the RESET button.
Hard Reset
After a hard reset all user data will be lost.
• To perform the hard reset, keep the On/Off button pressed while pressing the
RESET button.
Control Pad
Control Pad Elements and Their Functions
Launcher icon
Menu icon
Handwriting area
Scroll area
Switch to the Main Menu.
Show the available menus. Menus shortcuts, where
available, are shown to the right of the menu items.
Write letters in the Letter input area "abc", punctuation
in the Punctuation input area ":-)", and numbers in the
Number input area "123".
Scroll the screen content.
10
ECTACO Partner® B-3 Travel Phrasebook
User Manual
Main Menu
ECTACO Partner® B-3 Main Menu contains a row of three tabs at the bottom of the
screen and the universal indicator. The tabs are named as follows: Phrasebook,
Organizer, and Extras.
• Use the Phrasebook tab to access Phrasebook and Self-Learning Mode (Flash
Cards).
• Use the Organizer tab to access the following applications: Address Book,
Calculator, Date Book, Memo Book, Music Player, ToDo Book, and Voice Memo.
• Use the Extras tab to access the following applications: Setup, Currency
Conversion, Local Time, Metric Conversion, and World Time.
Universal indicator is a graphic item located in the lower right corner of the Main
Menu. By default, it shows the current time.
• Tap the universal indicator a few times to successively display the current date,
percent of remaining battery power, battery power graphic, and the amount of
available memory in the device.
Launcher Menu
• When in the Main Menu, tap
to invoke the Launcher Menu.
♦ Note: To perform the MMC Backup operation, please use a re-writable MMC (64
MB or above).
Handwriting Guide
• When in the Main Menu, tap
and then select Handwriting Guide.
• Tap the arrows ,
to scroll through each screen of the Handwriting Guide.
♦ Note: Before you input accented characters (where available), please make sure
you have selected the appropriate Pen Language (see page 13).
Control Wheel
• Turn or push the control wheel to select, open, or hear an entry pronounced,
where available.
• Turn the control wheel to scroll one page when reading a text.
11
ECTACO Partner® B-3 Travel Phrasebook
User Manual
♦ Note: The control wheel turns up and down; it does not spin. Please do not put
excessive force on the control wheel.
• Turn the control wheel to control the volume when listening to music.
Opening and Closing Programs
• To open a program, tap its corresponding icon.
• To return to the Main Menu without closing the program, tap
return to the program, tap
• To exit a program, tap
. To immediately
once again.
in the top right corner, or use the File / Exit command.
On-screen Keyboard
• To invoke the on-screen keyboard, draw a line straight up outside the Handwriting
area or tap
, where available.
SETUP
• Tap the Setup icon from the Extras tab to launch the application.
Interface Language3
• Tap ▼ next to Interface and then select the desired language.
The device will reboot and then all the messages and menus will appear in the
chosen language.
Select Date
• Tap anywhere on the date field to change the date or view another date.
Select Time
• Tap the up and down arrows to change the hour and minute.
• When 12-hour format is set, tap AM or PM to toggle between AM and PM.
Volume
• To increase or decrease the volume, move the slider to the right or left.
3
where available
12
ECTACO Partner® B-3 Travel Phrasebook
User Manual
Password
Setting the Password
• Tap
to open the Enter password screen.
• Specify a password up to 8 characters in length. Tap OK.
• Retype the password for confirmation. Tap OK.
Changing or Clearing the Password
• Tap
to open the Enter password screen.
• Input the current password. Tap OK.
• Specify a new one. When clearing the password, leave the filed blank. Tap OK.
• Retype the new password for confirmation. Tap OK.
♦ Note: Always remember your password. If you forget it, you will have to reset the
system, which may cause irrevocable loss of user data.
Disabling or Enabling the Password
• Go to the Main Menu, tap
and then select Disable Password.
• To re-enable the password, tap
and then select Enable Password. This
option will require password entry when the device is turned on.
Sounds
• Select the Quiet Mode check box to turn the device sounds off.
♦ Note: Music files, and the Date Book alarm are not affected by this option.
Pen Language
Allows you to activate character recognition for several languages, where available.
Shutoff Time
Allows you to set the time that elapses before the device automatically turns off.
Time Format, Date Format, Numbers
• To set the format for the time, date, or numbers, tap ▼ and then select the
desired format.
Week Start
• Tap ▼ and then select Monday or Sunday.
Double-click
Allows you to set the speed at which the screen recognizes taps from the stylus.
13
ECTACO Partner® B-3 Travel Phrasebook
User Manual
APPLICATIONS
Touch buttons
Button(s) Function(s)
Pronounce translation (in Phrasebook)
Change the operating mode (in Phrasebook)
Phrasebook setup
Change the direction of translation
Add the highlighted entry to a set of flash cards
Invoke the on-screen keyboard
Change the font size (three font sizes available)
,
Go to the previous or next entry respectively
Open a new record template
Delete a record
Create a new set (in Self-Learning Mode)
Rename the selected set (in Self-Learning Mode)
Reset statistics for the currently viewed set (in Self-Learning Mode)
Open the Edit set or Set setup screen (in Self-Learning Mode)
Display the List of sets (in Self-Learning Mode)
Create a set of 50 randomly chosen entries (in Self-Learning Mode)
Phrasebook
ECTACO Partner® B-3 substitutes for an interpreter in standard situations, such as
registering at a hotel, shopping, visiting bank etc. You simply choose the appropriate
phrase and the loudspeaker will pronounce its translation.
• Open the Phrasebook application. You will see the topics list.
Please navigate to the desired subtopics and phrases lists as described below.
• Use the control wheel or stylus to highlight the desired topic.
• To open the selected topic or subtopic, just tap it once again or push the control
wheel.
• To hear the translation pronounced, tap
or push the control wheel.
• To go up one level, just close the current window by tapping .
14
ECTACO Partner® B-3 Travel Phrasebook
User Manual
Phrases Mode, Useful Words Mode, Search Mode
• Tap
and then select Phrases mode (default setting), Useful words mode, or
Search mode.
In the Phrases mode the application shows full sentences, some of which have
changeable parts. These are shown in bold and underlined. For example, when
viewing the phrase How frequent are the flights? you can tap the flights and
change it to the trains. The phrase translation will change accordingly.
Switching to the Useful words mode is available in most topics. In this mode, the
application shows words and speech patterns pertaining to the topic.
Use the Search mode to find the desired phrase by a keyword. You may input a
whole phrase (for example, Thank you) or a single word (thank).
• In the search screen, enter the desired word and then tap on the Search button.
• When the desired phrase has appeared in search results, tap Stop and then tap
on your phrase. The search screen will close and the program will show you the
phrase with its translation in the respective topic.
♦ Note: To reduce the search time, please open the desired topic before you start
searching. Also, set the Start from option in the search screen to Current view. Clear
the Case sensitive and Whole words check boxes to broaden your search.
Phrasebook Setup
• Tap
to open the Phrasebook setup screen.
• Select the appropriate gender options under Speaking and Addressed to.
• Select the desired Font size.
Adding Entries to Flash Cards
• To add an entry to a set of flash cards, tap
, then select the desired set and
tap Add.
♦ Note: The Phrasebook and Self-Learning Mode (Flash Cards) applications use
the same database. When both applications are running simultaneously, the Object
is in use message may appear at certain operations. This is normal, just close either
of the applications by tapping .
Self-Learning Mode (Flash Cards)
ECTACO Partner® B-3 will help you enlarge your vocabulary quickly and advance
considerably in learning a foreign language.
• In the beginning, please select the desired language by tapping
.
You will see the Set setup screen.
15
and then tap
ECTACO Partner® B-3 Travel Phrasebook
User Manual
to create a new set.
• Tap
By default, the first set is named my set 1. Once you have created your set(s), tap
to close the Set setup screen and return the Edit set screen.
• Choose the desired set by tapping ▼ in the upper part of the screen, next to
Current set.
• To fill the current set with the Phrasebook entries, select the desired entry and
then tap
.
• Use
to create a set of 50 randomly chosen entries.
When you have filled the desired set, you are ready to start learning.
• Tap to close the Edit set screen. The Flash Cards screen will be shown.
• Use the available touch buttons (see page 14).
The number of unlearned cards in a set is recorded for each game. This information
is displayed on the screen. For example, Left: 10 means you have 10 cards
unlearned.
• Tap the Drop button to set a card apart.
• To go to the next card, tap Next >>.
• Select the Always show translation option to have the program show you
translation in each card.
• Alternatively, tap on the Show Translation message to see the translation. To hide
the translation, just tap on it.
to display the List of sets. Here you can select a new set for the game.
• Tap
♦ Note: You cannot select an empty set.
Your goal is to learn all cards in your set. You may quit the game and resume playing
at any time. Just launch the application to start playing beginning from where you
left.
Address Book
Your ECTACO Partner® B-3 includes Address Book, a standard organizer program
for storing names, telephone numbers, street and electronic addresses.
Creating a Record
• Tap New.
• Tap in the data entry column next to the desired label.
• To see additional labels, tap the button for the desired view and then tap in the
data entry column next to the desired label. Tap ▼ to see the drop-down list and
select the name you want. Enter your information in every view and field you want.
• In the Personal view, tap Details to select the phone number you want displayed.
16
ECTACO Partner® B-3 Travel Phrasebook
User Manual
Editing Entries
•
•
•
•
•
1) Tap the desired entry and then tap in the data field you want to change.
Enter or edit information in any view and field.
Tap Done or to save your changes and return to the Contacts List.
2) Or, hold your stylus down on the entry.
Select Edit on the appeared menu.
Custom Fields
• From the Contacts List, tap
and then select File / Custom Fields.
• Tap in the field of the label you want to edit and specify the desired label name.
• Use File / Preferences to set the desired sort order.
Searching for an Entry
• When in the Contacts List, tap on the line next to Search and enter the first letter
or letters of the entry you want to find.
Deleting Entries
• In the Contacts List, hold your stylus down on the entry you want to delete.
• Tap Delete on the appeared pop-up menu.
Menus
The File menu is available in the Contacts List and the Edit menu is available in each
of the four views when the cursor is blinking.
• When the program is running, tap
to display the available menus.
Calculator
ECTACO Partner® B-3 includes a standard calculator with 10-digit display capacity.
• Use this program as a standard pocket calculator.
Date Book
A standard organizer program for scheduling.
Adding Appointments
•
♦
•
•
Tap Go To, select the desired month and day and then tap Select.
Note: You must be in the Daily View to add appointments to your schedule.
Tap on the desired line in the data entry column and enter your appointment.
Tap the time approximate slot for your appointment to set a start and end time.
to display the Recurrence screen.
• In the Edit window, tap
• Tap the check box next to Daily, Monthly, Weekly, or Yearly.
• Tap a button (S M T W T F S) to set the day of the week for the recurring event.
17
ECTACO Partner® B-3 Travel Phrasebook
• In the Edit window, use
User Manual
to set the time when the alarm will sound.
Views
The Daily View displays the schedule for the selected day. It is the first screen you
see when you enter Date Book. To return to this view from another screen, tap
• Use
.
to return to the current date.
The Weekly View displays the schedule for a single week. Tap
Weekly View.
to go to the
• Tap
at the bottom of the screen to see the week’s schedule as a list.
• Tap
at the bottom of the screen to see the week’s schedule as a grid.
• The Monthly View displays the schedule for any single month. Just tap
.
Menus
There are two menus in Date Book: File and Edit. The File menu is available in the
Weekly and Monthly Views and both menus are available in the Daily View.
• When the program is running, tap
to display the available menus.
Memo Book
The Memo Book application provides you with a storage place for your notes.
• To add a memo, tap New and enter your memo. Tap Done to save it.
• Tap ▼ to see the Sort drop-down list.
• To view the whole memo, tap the number of the desired memo.
Editing Memos
• Tap the memo you want to edit.
• Place the cursor where you want to edit and then add or delete text. Tap Done.
Menus
There are two menus in Memo Book: File and Edit. The File menu is available in the
memo list and both menus are available in the Edit screen.
• When the program is running, tap
to display the available menus.
Music Player
ECTACO Partner® B-3 includes Music Player, a program allowing you to play music.
The program supports MP3 files.
• To download MP3 files into your device, please use ECTACO Desktop Manager
and a re-writable MMC (64 MB or above).
18
ECTACO Partner® B-3 Travel Phrasebook
User Manual
♦ Note: If the source MP3 file is in a wrong encoding, Music Player may not be able
to recognize it or even may stop responding. Use the Active Programs menu to stop
the program in this case.
Buttons
– Play,
Rewind.
– Pause playing,
– Stop playing,
– Fast forward,
–
Menus
• When the program is running, tap
to display the available menus.
ToDo Book
ToDo Book is a standard organizer program for managing your tasks.
Adding Entries
•
•
•
•
Tap New and enter a todo text.
Tap the Priority icon and select Low ( ), Normal ( ), or High ( ).
Tap Edit to add settings.
Tap on the completion check box to mark/unmark a todo as completed.
Editing Entries
• Place the cursor in a todo where you want to edit and make your changes.
• To delete a todo, hold the stylus down on the task. On the appeared menu, tap
Delete.
Menus
There are two menus in ToDo Book: File and Edit. The File menu is available when
no todo is selected in the ToDo List. When a todo is selected, both menus are
available.
• When the program is running, tap
to display the available menus.
Voice Memo
Voice Memo allows you to record memos and play them back.
Buttons
– Record a memo. This button changes to Stop when you are recording or
listening.
– Stop the memo recording or playing.
Pause playing.
– Fast forward.
– Play the memo.
– Rewind.
Menus
• When the program is running, tap
to display the available menus.
19
–
ECTACO Partner® B-3 Travel Phrasebook
User Manual
Currency Conversion
Allows you to instantly calculate cross rates for combinations of over 20 currencies.
Setting and Checking Rates
• Tap on the currency name to open the Currency setup window.
• Change/specify the Currency name and/or Currency rate. Tap Save.
. The Currency setup window
• To add user-defined currencies to the list, tap
will open. Enter the desired data into the Currency name and Currency rate fields.
Conversion
• Set the cursor position to the desired field in the right column of the table.
• Enter the value. The conversion is performed while you are typing.
Local Time
The Local Time application shows: the name of the city and country representing the
local time zone and a map of the corresponding continent, the current date, and the
current time.
to the left of the city or country name to open the list of cities or counties
• Tap
respectively.
• To add a new city to the list, tap
to open the New city template.
• Use
to hear the announcement of the displayed time.
• Use
to turn Daylight Saving Time (DST) on or off.
Metric Conversion
With ECTACO Partner® B-3 you may easily convert units of measure.
• Choose a subsection by tapping ▼ in the upper left corner of the screen.
• Set focus to the desired field by tapping in it and then enter the value.
The conversion is performed while you are typing.
World Time
Using ECTACO Partner® B-3, you may view current times in cities around the globe,
along with appropriate map illustrations.
to the left of the city or country name to open the list of cities or counties
• Tap
respectively.
• To add a new city to the list, tap
• Use
to open the New city template.
to hear the announcement of the displayed time.
20
ECTACO Partner® B-3 Travel Phrasebook
• Use
User Manual
to turn Daylight Saving Time (DST) on or off.
PC COMMUNICATION
Using the USB cable and ECTACO Desktop Manager software you may exchange
data between your ECTACO Partner® B-3 and a personal computer. This will allow
you to keep a backup copy of user data. When prompted to specify a path to the
device driver, go to the folder into which you have installed ECTACO Desktop
Manager, then open the USB_Driver folder and select ebookman.sys. The default
path is C:\Program Files\Ectaco\Desktop Manager\USB_Driver.
Toolbar
The ECTACO Desktop Manager toolbar buttons perform the following functions:
– synchronize data between your PC and ECTACO Partner® B-3.
the upper folder.
– display files in the Contents folder.
the Library folder in the Contents pane.
the Contents view.
– go to
– display files from
– switch from the Connection view to
– switch from the Contents view to the Connection view.
Views
In the Connection view, if ECTACO Desktop Manager detects the device, the image
on the screen will show the connection.
The Contents view uses two list panes to organize and display files stored on your
PC (the Contents pane) and content stored in the device (the Device pane).
• Right-click on a file or folder to access its context menu.
Menus
File
Menu Item
Synchronize
Send to device
Send to PC
Copy to Library Folder
Copy to Contents
Folder
Function
Synchronize all files between the current Contents
directory and the device.
Move a highlighted file from the Contents pane to the
Device pane.
Move a highlighted file from the Device pane to the
Contents pane.
Copy a highlighted file to the Library folder.
Copy a highlighted file to the Contents folder.
21
ECTACO Partner® B-3 Travel Phrasebook
Unpack
Delete
Properties
Open
Change to Contents
Folder
Change to Library
Folder
Change Folder
Change Sync Folder
Exit
User Manual
Expand a zipped seb file.
Remove a highlighted file or folder.
Display the properties of the highlighted file: name, type,
size, publisher, and security.
Open a highlighted folder.
Change the directory in the Contents pane to the Contents
folder.
Change the directory in the Contents pane to the Library
folder.
Change the folder displayed in the Contents pane.
Change the folder from which content is synchronized to
the device.
Close ECTACO Desktop Manager.
View
Menu Item
Function
Display information about the device.
Display or hide the toolbar. By default, the toolbar is
displayed.
Switch Panes
Switch the Contents and Device panes.
Refresh
Reload the active pane.
♦ Note: Due to a difference in the file systems of ECTACO Partner® B-3 and PC,
file sizes shown in the Contents pane may slightly differ from those shown in the
Device pane.
Device Info
Toolbar
22
Download PDF