7165-102
Pub. DS7165-102
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Model 7165-102
Multi-Party Flush-Mount Subset
General Information
This data sheet applies to the Model 7165-102 Multi-Party Flush-Mount Subset, which is intended for use
in GAI-Tronics Page/Party® and SmartSeries systems. The remote subset includes a pressbar handset, a
handset cradle, and a five-party rotary selector switch.
The Model 7165-102 Multi-Party Flush-Mount Subset must be installed with a certified remote subset
amplifier and a certified Model 7245 Enclosure for proper operation. The subset must be mounted in an
indoor location within eight feet of the enclosure.
Specifications
Construction/finish..................................................... 16-gauge cold-rolled steel/gray polyurethane enamel
Handset microphone ............................................................................. Dynamic, noise-canceling, 10 ohms
Receiver ........................................................................ Dynamic, 150 ohms, hearing aid compatible
Cable .......................................................................................................... Retractile, 6-foot extended
Material ............................................................................................................................... Gray ABS
External controls ........................................................... Handset pressbar for paging; rotary selector switch
Mounting ................................................... Flush-mount or similar location; four 0.25-inch mounting holes
Temperature range ............................................................................... −22 F to 158 F (−30 C to +70 C)
Connections...................................................................... 8-foot cable with connector, hard-wired to subset
Front panel dimensions ........................................................... 6.00 H  6.00 W inches (152.4  152.4 mm)
Behind panel ................................................................................................................ 2.5 inches (63.5 mm)
Cutout dimensions ........................................ 5.00 W  4.88 H  2.50 D inches (127.0  124.0  63.5 mm)
Shipping weight .................................................................................................................. 3.9 lbs. (1.77 kg)
Approvals
NRTL certified for use in US and Canada .............................................. Class I, Div. 2, Groups A, B, C, D,
when connected to a certified GAI-Tronics Model 7245 Amplifier Enclosure
using a certified GAI-Tronics Model 723 Amplifier
Temperature Code.................................................................................... T3C (Maximum ambient = 70º C)
CE Mark
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Model 7165-102 Flush-Mount Multi-Party Subset
Figure 1. Model 7165-102 Flush-Mount Subset
Outline
f:\standard ioms - current release\data sheets\ds7165-102.doc
04/13
Pub. DS7165-102
Page: 2 of 2
Figure 2. Model 7165-102 Flush-Mount Subset
Side View
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement