Arrow Pneumatics | RH203 | Specifications | Arrow Pneumatics RH203 Specifications

CATALOGS
CATALOGS
CATALOGS
CATALOGS
A R R O W
FILTERS
P N E U M A T I C S
REGULATORS
LUBRICATORS
ACCESSORIES
A R R O W
P N E U M A T I C S
Arrow Pneumatics manufactures a broad range
of air preparation products. They include: particulate,
oil removing, coalescing and absorbing filters; regulators;
lubricators; sintered bronze exhaust mufflers, speed
controls and in-line filters; aftercoolers, refrigerated
and regenerative air dryers.
Technology expertise, patented design features,
high quality standards and timely reaction to industry
demands have established Arrow Pneumatics as
a leader in the compressed air preparation field.
Arrow Pneumatics has a staff of qualified sales
engineers to assist you with solutions to compressed
air system needs and is committed to the future of
compressed air technology.
COMPRESSED
AIR SYSTEMS
Compressed air powered equipment and
machinery are critical elements in the
productivity, efficiency and economy of
today’s industry, and quality air is the
essential ingredient. High speed pneumatic
production lines operate efficiently because
of air dryers and filters that remove
moisture and impurities from the air and
regulators and lubricators which help
eliminate downtime.
AIR DRYERS
Water in a compressed air system,
if not removed, can damage production
machinery, rust pipes, shorten component
life, clog air lines and reduce air flow,
resulting in costly downtime and defective
product. Dryers remove water vapor from
the air. Installing a dryer removes this water
vapor before it condenses in the line or in
downstream equipment.
FILTERS
Particulate filters remove harmful oil and
water condensate, pipe scale, dirt and rust
from your compressed air system. This
prevents corrosive damage to compressed
air equipment and finished products.
Typically, particulate filters are installed
upstream of regulators to prevent valve
failure. They are also used as pre-filters to
oil removing and coalescing filters to insure
high efficiency and long element life in
applications such as paint spraying,
instrumentation and pharmaceuticals.
2
▼
,,
,,
,,
Compressed Air Systems
Certain pneumatic systems require air
virtually free of oil and oil vapors. In these
instances, oil removal may be achieved with
the use of a coalescing filter.
REGULATORS
Pneumatic equipment that operates at
higher than recommended pressure can
cause excess torque, force and wear and
can waste compressed air. Operating below
specified pressure can cause machines to
fail to meet their design performance
specifications. Therefore, precise air
pressure control is essential to efficient
operation of air-powered equipment. An
air line regulator is a specialized control
valve which reduces upstream supply
pressure level to a specified constant
downstream pressure.
LUBRICATORS
Most pneumatic system components and
most pneumatic tools require oil lubrication
for proper operation and long service life.
Too little oil can cause excessive wear and
premature failure. Too much oil is wasteful
and can become a contaminant, particularly
when carried over with the air exhaust.
Pneumatic equipment can be lubricated by
the use of an air-line lubricator. Filtered and
regulated air enters the lubricator and is
mixed with oil in an aerosol mist. The
lubricated air is then routed to the
operating system.
FILTRATION SELECTION CHART
APPLICATION
●
General Industrial
FEATURES
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
General Industrial Use where Oil
Exists in Supply
Air Cylinders, Valves, Motors
Pneumatic Machinery
General Paint Spraying
●
Instrumentation
Blow Molding
Air Blowing on Finished Product
Bottling Industry
Paint Spraying (critical)
●
Critical Instrumentation
Food/Dairy/Beverage
Clean Rooms
Pharmaceutical
●
APPLICATION
●
●
●
●
Any Industrial Location that
Cannot Tolerate Moisture or Oil
Residue in Compressed Air
Spray Painting
Pneumatic Machinery
Climate Control
General Purpose Liquid
Removal and Particle Removal
with Low Pressure Drop and
Long Life
General Purpose Liquid Removal
with Extra Fine Particle
Retention
General Purpose Liquid Removal
with Fine Particle Retention and
Less Pressure Drop
Oil Removal with Long Element
Life and Sub Micron Particle
Retention
High Efficiency Oil and
Water Removal and
Sub Micron Particle Retention
High Efficiency Oil Removal,
Sub Micron Particle Retention;
and Oil Vapor and Odor
Removal
SUGGESTED INSTALLATION AT POINT OF USE
FILTER
AIR SUPPLY
FILTER
AIR SUPPLY
●
Pre-Filter Removes Bulk
Liquid and Particulate Matter
which may Clog or
Harm Heat Exchanger
Oil Removal Filters Remove
Oil Carryover not Removed
by Dryer
F3-3
FILTER
AIR SUPPLY
AIR SUPPLY
AIR SUPPLY
AIR SUPPLY
F3-5
PRE-FILTER
OIL REMOVING FILTER
F3
F4
PRE-FILTER
COALESCING FILTER
F3
F5
PRE-FILTER
COALESCING FILTER
ADSORBING FILTER
F3
F5A
F6
SUGGESTED INSTALLATION WHEN USED WITH REFRIGERATED AIR DRYERS
FEATURES
●
F3
COMPRESSOR
AFTER COOLER
*PRE-FILTER
REFRIGERATED AIR DRYER
OIL REMOVAL FILTER
SEE CAT.
NO. X1024
F3
SEE CAT.
NO. X1020
F4
SEE CAT.
NO. X1024
SEPARATOR
APPLICATION
●
●
●
●
Outside Dryer Locations
Instrument Air with
Extra Low Dewpoints
Micro Processor Industry
Replacement of Nitrogen
●
Separator and Pre-Filter Remove
Bulk Liquid and Oil Residue
which Contaminates Desiccant
After Filter Removes Fine
Desiccant Dust Carryover
F5 (OPT.)
SUGGESTED USE WHEN USED WITH REGENERATIVE DESICCANT DRYERS
FEATURES
●
* OPTIONAL WITH ARROW DRYERS
BUT REQUIRED WITH MOST OTHER
REFRIGERATED DRYERS.
COMPRESSOR
AFTER COOLER
PRE-FILTER
COALESCING FILTER
REGENERATIVE DRYER
SEE CAT.
NO. X1024
F3
F5
SEE CAT.
NO. X1005
SEE CAT.
NO. X1024
F3
SEPARATOR
AFTER FILTER
TECHNICAL DATA
USAGE
Series F3 Particulate
Bulk Liquid (Water, Oil) and
Particle Removal
Series F4
Oil Removal
Coalescing Style
Economical Liquid Oil and
Oil Aerosol Removal
Series F5
Coalescing Style
High Efficiency Removal of Water,
Oil Aerosols; Plus Sub Micron
Particle Retention
Series F6
Adsorbing, Charcoal
Impregnated Coalescing Style
Removal of Oil Vapors and
Oil Associated Odors as well as
Solid Particulate Contaminates.
Requires F5A Pre-Filter
SUFFIX
PARTICLE SIZE
REMOVAL
D.O.P.
EFFICIENCY
REMAINING OIL
CONTENT BY
WEIGHT
(Intake of 50 ppm)
___3
___5
Std
Extra Fine
Fine
General
3 µ ABSOLUTE
5 µ NOMINAL
40 µ NOMINAL
Std
General
.9 µ
95%
2.5 ppm
A
Extra High
Efficiency
High
Efficiency
.01 µ
99.9999%
.0005 ppm
.03 µ
99.97%
.015 ppm
90%
.0001 ppm
Std
Std
DRY
PRESSURE
DROP
MATERIAL
5 psig at
Nominal Rated
Flow for
Std. Element
Cellulose
Porous Bronze
Porous Bronze
.5 to 2.5 psig
Borosilicate
Micro Glass
Fibers
.5 to 2.5 psig
Borosilicate
Micro Glass
Fibers
.5 to 2.5 psig
Borosilicate
Micro Glass Fibers
Impregnated with
Activated Charcoal
Particles
Filtration Selection Chart
▼
ARROW FILTER SERIES
3
PARTICULATE FILTERS
Arrow F3 series particulate filters
remove harmful oil/water condensate,
pipe scale, dirt and rust from your
compressed air system. This prevents
corrosive damage to compressed air
equipment and finished products.
Typically, particulate filters are installed
upstream of regulators to prevent valve
failure. They are also used as pre-filters to
oil removing and coalescing filters to
insure high efficiency and long element
life in applications such as paint spraying,
instrumentation and pharmaceuticals.
Each filter is equipped with a highly
efficient baffling system for maximum
bulk liquid and dirt particle removal.
The Arrow heavy-duty, cleanable porous
bronze element removes fine particles.
Particle removal can be tailored to specific
needs with either the 40 or 5 micron
bronze element. An optional 3 micron
absolute pleated fiber element is also
offered for extra-fine particle removal.
The Arrow 3 micron absolute element is a
high efficiency filter element with solid
particulate removal in the 90% efficiency
range down to .28 microns. The Beta
efficiency rating is 99.5%. The element is
constructed of pleated cloth fibers and rib
supports for strength. Both ends have
urethane 50 durometer elastomer seals to
LEGEND
insure particulate entrapment. The pleated
fiber design gives this element 10 times
▼
▼
the surface area of similar nominal rated
elements. This increased surface area
▼
provides a long element life and the same
▼
pressure drop characteristics as our
current 40 micron element. When used as
a pre-filter to a coalescing filter, it will
increase the life of the coalescing element
4
▼
by 4 to 6 times.
Particulate Filters
!
– Air Containing Liquid
and Particulate
– Clean Air
– Liquid and Particulate
IMPORTANT: Particulate filters only remove water in its liquid state.
Water vapors will pass through a particulate filter and condense
into liquid as the temperature in the air line drops. Liquid
condensation may have a harmful effect on certain applications.
We recommend installing an ARROW dryer for complete
removal of liquid condensation from the system.
Miniature Particulate Filters
Body black coated zinc
Baffle plastic
Seals Buna N
SPECIFICATIONS
WARNING! Polycarbonate plastic bowls
could rupture if exposed to incompatible
chemicals whether inside or outside the
bowl. If such chemicals are present, use a
metal bowl.
Elements
20 micron sintered bronze
●
5 micron sintered bronze
●
Polycarbonate Bowl
●
●
FEATURES
●
●
●
20 micron sintered bronze element
High strength, recleanable
1 oz. polycarbonate bowl
Manual twist drain
Bowl Kits
● Polycarbonate. . . . . . . . . . . . BKF300
● Polycarbonate with
overnight drain . . . . . . . . . . . BKF300J
● Metal . . . . . . . . . . . . . . . . . . BKF300M
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 175˚F
Element Kits
● 20 micron 2-pack . . . . . . . . . EKF300
●
5 micron 2-pack . . . . . . . . . EKF300-5
Piston Drain
Note: Z option is differential drain which opens & ejects
Drain Kit
● Piston drain kit . . . . . . . . . . . PKF300
water only when a differential pressure is created at the
start of air flow. The piston drain lifts up (approx. 1
OPTIONS
add suffix to part number in alpha and
numeric order
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psig.
J Overnight drain for
polycarbonate bowl . . . . . . . F300-01J
Push to manually drain.
K Overnight drain for
metal bowl . . . . . . . . . . . . . F300-01KM
Twist to manually drain.
M Metal bowl . . . . . . . . . . . . . F300-01M
Z Piston drain . . . . . . . . . . . . F300-01Z
-5 5 micron element . . . . . . . . F300-01-5
second) & closes, it will not operate again until the flow
stops, then starts back up again.
●
●
●
Max. pressure 175 psig
Operating temperature range
40˚F to175˚F
Mounting Bracket . . . . . . . . . FBK3
PERFORMANCE CHARACTERISTICS FOR 20 MICRON ELEMENT
* 5 micron element calculate a 10% less flow.
DIMENSIONS
A
B
A
PIPE
SIZE
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
/8 9
F300-01
27
/49
F300-02
27
1
C
1
A
B
C
WEIGHT
(LBS.)
1 oz.
11/2
1
45/8
.5
1 oz.
11/2
1
45/8
.5
DIMENSIONS (INCHES)
/2
/2
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Particulate Filters
▼
●
KITS
Max. pressure 150 psig
Operating temperature range
40˚F to 125˚F
5
Tri Star Particulate Filters
●
OPTIONS
SPECIFICATIONS
add suffix to part number in alpha and
numeric order
WARNING! Polycarbonate plastic bowls
could rupture if exposed to incompatible
chemicals whether inside or outside the
bowl. If such chemicals are present, use a
metal bowl.
Float Drain
An internal float rises as condensate accumulates in a filter bowl to activate the drain.
F Internal float drain. . . . . . . . F352F
Polycarbonate Bowl
● Max. supply pressure 150 psig
● Operating temperature range
40˚F to 125˚F
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
J Overnight drain for
polycarbonate bowl . . . . . . . F352J
Push to manually drain.
K Overnight drain for
metal bowl . . . . . . . . . . . . . F352KM
Twist to manually drain.
M Black coated
metal bowl . . . . . . . . . . . . . F352M
W Black coated
metal bowl with sight . . . . . F352W
-5 5 micron element . . . . . . . . F352-5
-3 3 micron absolute element . F352-3
Metal Bowl
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
Metal Bowl with Sight
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Internal Float Drain
● Buna N float
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
Body black coated aluminum
Bowl Guard nickel plated steel
Baffle plastic
Vane plastic
Seals Buna N
FEATURES
●
●
●
●
40 micron sintered bronze element
offers depth filtration. High strength,
recleanable
5 oz. polycarbonate bowl with
nickel plated steel bowl guard
Manual push drain on polycarbonate bowl
In-line or modular installation
A
A
A
B
B
D
6
▼
C
Particulate Filters
C
3 Micron Absolute
The new Arrow 3 micron absolute element
is a high efficiency particulate removal
element. Unlike nominal rated particulate
elements, the 3 micron absolute is
Element Kits
40 micron 2-pack . . . . . . . . . EK35
●
5 micron 2-pack . . . . . . . . . EK35-5
●
3 micron absolute 2-pack . . EK35-3
Elements
● 40 micron sintered bronze standard
●
5 micron sintered bronze
●
3 micron absolute pleated fiber
●
KITS
●
qualified to an efficiency rating of 99.5%
solid particulate removal at 3 microns,
and maintains 95% efficiency ratings
to .3 microns.
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF35
● Replacement sight kit . . . . . . WK45
Internal float drain kit . . . . . . 5200
Bowl Kits
● Polycarbonate with guard . . . BKF35
● Black coated metal . . . . . . . . BKF45M
● Black coated metal
with sight . . . . . . . . . . . . . . . BKF45W
REMOVAL EFFICIENCY RATING*
PARTICLE
SIZE
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK5
5 MICRON
NOMINAL
ARROW
3 MICRON
ABSOLUTE
.3 µ
19.2%
95.0%
.5 µ
28.8%
97.6%
1.0 µ
35.1%
97.6%
3.0 µ
89.7%
99.5%
* Beta Filtration Rating
β 3 = 200
Features:
Element media is cellulous and
synthetic fibers with a resin binder.
The pleated design has 10 times the
surface area of sintered nominal rated
elements and increases particle
collection.
●
PERFORMANCE CHARACTERISTICS FOR 40 MICRON ELEMENT
* 5 micron element reduces flow by 10%
●
End seals consist of 50 durometer
Urethane to prevent solid particulate
leakage past the element.
●
Solid rib supports add extra strength
and prevent element collapse under
high differential pressure loads.
●
Flow and pressure drop identical to
40 micron element.
DIMENSIONS
PIPE
SIZE
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
DIMENSIONS (INCHES)
A
B
C
D
WEIGHT
(LBS.)
/49
F352
48
5 oz.
23/4
3
/4
61/4
21/2
1.2
/89
F353
75
5 oz.
23/4
3
/4
61/4
21/2
1.2
/29
F354
100
5 oz.
23/4
3
/4
61/4
21/2
1.2
/49
F352W
48
6 oz.
23/4
3
/4
67/8
21/2
1.7
/89
F353W
75
6 oz.
23/4
3
/4
67/8
21/2
1.7
/29
F354W
100
6 oz.
23/4
3
/4
67/8
21/2
1.7
1
3
1
1
3
1
Applications:
● Air gauging equipment
● Instrument air
● After filter for desiccant dryer
Particulate Filters
▼
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
7
MidFlow Particulate Filters
SPECIFICATIONS
Elements
40 micron sintered bronze
●
5 micron sintered bronze
●
3 micron absolute pleated fiber
Metal Bowl
●
Zinc, black coated
●
Max. supply pressure 250 psig
●
Operating temperature range
40˚F to 200˚F
●
KITS
●
Metal Bowl with sight
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
FEATURES
●
●
●
●
40 micron sintered bronze element
offers depth filtration. High strength,
recleanable
10 oz. or 20 oz. black coated metal
bowl with liquid level sight
Manual twist drain
High Flow, low pressure drop
OPTIONS
add suffix to part number in alpha and
numeric order
Float Drain
An internal float rises as condensate accumulates in a filter bowl to activate the drain.
F Internal float drain. . . . . . . . F373FW
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psi.
K Overnight drain . . . . . . . . . . F373KW
Twist to manually drain.
M Metal bowl
without sight glass . . . . . . . F373M
5 5 micron element . . . . . . . . F373W5
3 3 micron absolute element . F373W3
Bowl Kits
● Metal with sight . . . . . . . . . . BKF47W
BKF48W
● Metal without sight . . . . . . . . BKF47M
BKF48M
Internal Float Drain
● Buna N float
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
Element Kits
● 40 micron. . . . . . . . . . . . . . . EK37, EK38
● 5 micron . . . . . . . . . . . . . . . EK37-5, EK38-5
●
3 micron absolute . . . . . . . . EK37-3, EK38-3
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF37
RKF38
● Replacement sight kit . . . . . . WK47
Body black coated aluminum
Baffle plastic
Seals Buna N
Vane plastic
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
PERFORMANCE CHARACTERISTICS FOR 40 MICRON ELEMENT
* 5 micron element reduces flow by 10%.
DIMENSIONS
A
B
PIPE
SIZE
BOWL
CAPACITY
/89
F373W
110
10 oz.
33/4
13/32
75/8
2.7
/89
F383W
110
20 oz.
33/4
13/32
107/8
3.8
/29
F374W
160
10 oz.
33/4
13/32
75/8
2.7
/29
F384W
165
20 oz.
33/4
13/32
107/8
3.8
/49
F376W
230
10 oz.
33/4
13/32
75/8
2.7
/49
F386W
245
20 oz.
33/4
13/32
107/8
3.8
3
1
C
1
3
3
▼
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Particulate Filters
DIMENSIONS (INCHES)
A
B
C
MODEL NO.
MAX. FLOW
SCFM*
3
8
Internal float drain kit . . . . . . 5200
WEIGHT
(LBS.)
High Flow Particulate Filters
SPECIFICATIONS
KITS
Metal Bowl
● Steel, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Metal Bowl with sight
Steel, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Element Kits
● 40 micron. . . . . . . . . . . . . . . EKF329
●
5 micron . . . . . . . . . . . . . . . EKF329-5
●
3 micron absolute . . . . . . . . EKF329-3
Bowl Kits
● Metal with sight . . . . . . . . . . BKF329W
● Metal without sight . . . . . . . . BKF329M
●
●
●
●
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF329
● Replacement sight kit . . . . . . WK35
Internal Float Drain
● Buna N float
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
40 micron sintered bronze element
offers depth filtration. High strength,
recleanable.
Metal bowl is standard with
liquid level sight
Manual twist drain
Internal float drain. . . . . . . . . 5200
Body black coated aluminum
Baffle plastic
Seals Buna N
Vane aluminum
OPTIONS
add suffix to part number in alpha and
numeric order
Elements
● 40 micron sintered bronze
●
5 micron sintered bronze
●
3 micron absolute pleated fiber
D Differential pressure gauge . F329-10
DWFloat Drain
An internal float rises as condensate accumulates in a filter bowl to activate the drain.
F Internal float drain. . . . . . . . F329-08FW
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psi.
K Overnight drain
for metal bowl . . . . . . . . . . F329-08KW
Twist to manually drain
5 5 micron element . . . . . . . F329-08W5
3 3 micron absolute element . F329-08W3
PERFORMANCE CHARACTERISTICS
For Metal Bowl without sight delete W
* 5 micron element reduces flow by 10%
DIMENSIONS
A
B
PIPE
SIZE
BOWL
CAPACITY
/49
F329-06W
260
29 oz.
55/32
13/16
913/32
3.7
19
F329-08W
300
29 oz.
55/32
15/16
913/32
3.7
11/49
F329-10W
400
29 oz.
51/4
11/2
1011/32
6.3
11/29
F329-12W
425
29 oz.
51/4
11/2
1011/32
6.3
B
3
C
F329-10W, F329-12W
C
DIMENSIONS (INCHES)
A
B
C
MODEL NO.
MAX. FLOW
SCFM*
WEIGHT
(LBS.)
F329-06W, F329-08W
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Particulate Filters
▼
A
9
High Flow Particulate Filters
Elements
40 micron pleated fiber
●
5 micron pleated fiber
●
3 micron absolute pleated fiber
SPECIFICATIONS
●
Metal Bowl
● Steel, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
KITS
●
Metal Bowl with sight
● Steel, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
FEATURES
●
●
●
40 micron pleated fiber element
offers depth filtration. High strength,
recleanable.
Metal bowl is standard
Twist drain
OPTIONS
add suffix to part number in alpha and
numeric order
D Differential pressure gauge . F358HF-08D
Float Drain
An internal float rises as condensate accumulates in a filter bowl to activate the drain.
F Internal float drain. . . . . . . . F358HF-08F
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It clears
accumulated condensate from a filter bowl when
pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psi.
K Overnight drain . . . . . . . . . . F358HF-08K
Twist to manually drain.
W Metal bowl
with sight glass. . . . . . . . . . F358HF-08W
-3 3 micron
absolute element . . . . . . . . . F358HF-08-3
Internal float drain. . . . . . . . . 5200
Bowl Kits
● Metal with sight . . . . . . . . . . BKF364W
● Metal without sight . . . . . . . . BKF364
Element Kits
● 40 micron. . . . . . . . . . . . . . . EKF358
●
3 micron . . . . . . . . . . . . . . . EKF358-3
Internal Float Drain
● Buna N float
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF508
● Replacement sight kit . . . . . . WK35
Body black coated aluminum
Baffle plastic
Seals Buna N
Vane aluminum
PERFORMANCE CHARACTERISTICS FOR 40 MICRON ELEMENT
* 5 micron element reduces flow by 10%
A
DIMENSIONS
B
C
BOWL
CAPACITY
MAX. FLOW
SCFM*
MODEL NO.
19
F358HF-08
50 oz.
460
51/4
11/2
141/2
11
11/49
F358HF-10
50 oz.
500
51/4
11/2
141/2
9
11/29
F358HF-12
50 oz.
550
51/4
11/2
141/2
7.8
▼
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
10
Particulate Filters
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
WEIGHT
(LBS.)
High Flow Particulate Filters
SPECIFICATIONS
KITS
Metal Bowl
• Black coated aluminum
●
Max. supply pressure 250 psig
●
Operating temperature range
40˚F to 200˚F
●
Bowl Kits
● Metal with sight . . . . . . . . . . BKF510W
● Metal without sight . . . . . . . . BKF510
● Metal with sight . . . . . . . . . . BKF518W
● Metal without sight . . . . . . . . BKF518
Metal Bowl with sight
• Black coated aluminum
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
FEATURES
●
●
●
40 micron standard element offers depth
filtration for 11/29 and 29. High strength,
recleanable.
Metal bowl is standard
Twist drain
Float for External Drain . . . . . 5200
Element Kits
●
40 micron . . . . . . . . . . . . . . EKF3N1
●
3 micron . . . . . . . . . . . . . . EKF3N1-3
●
40 micron . . . . . . . . . . . . . . EKF3NHF
●
3 micron . . . . . . . . . . . . . . EKF3NHF-3
Body black coated aluminum
Baffle plastic
Seals Buna N
Repair Kits
Repair kit . . . . . . . . . . . . . . . RKF3N1
RKF519
● Replacement sight kit . . . . . . BSF510
●
OPTIONS
add suffix to part number in alpha and
numeric order
D Differential pressure gauge . F3N1-12D
T External Float Drain . . . . . . . F3N1-12T
W Metal bowl
with sight glass. . . . . . . . . . F3N1-12W
-3 3 micron
absolute element . . . . . . . . F3N1-12-3
PERFORMANCE CHARACTERISTICS FOR 40 MICRON ELEMENT
1
1
1
* 5 micron element reduces flow by 10%
A
DIMENSIONS
C
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
MODEL NO.
BOWL
CAPACITY
11/29
F3N1-12
100 oz.
910
61/2
2
173/4
13
29
F3N1-16
100 oz.
910
61/2
2
173/4
13
39
F3NHF-24
200 oz.
1300
75/8
21/4
271/2
18
MAX. FLOW
SCFM*
WEIGHT
(LBS.)
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Particulate Filters
▼
B
11
COALESCING FILTERS
A coalescing filter functions in a different
way from a standard particulate filter. Air
flows from inside to outside through a
coalescing media. Coalescing, by
definition, means “to come together”. It is
a continuous process by which small
aerosols come in contact with the fibers
in the filter media, uniting with other
collected aerosols and growing to emerge
as a droplet on the downstream surface of
the media which by its weight is gravitationally drained away. For maximum
performance and efficiency, coalescing
filters should be preceded by an
F3 particulate filter.
1) Molded, bonded urethane
rubber end seals, seal on
face and bore to ensure
that all aerosols will pass
through media.
2) High efficiency borosilicate
glass fiber media coalesces
and removes finest oil
aerosols, Arrows unique
tapered layer structure
reduces wet pressure drop
and extends element life.
F4 oil removing filters offer general
industrial filtration with low pressure drop
and long element life. They are often used
with older compressors where downstream oil carryover is excessive and
when longer element life and low pressure
drop are a concern.
3) The borosilicate core is
additionally protected by
polyester wraps before and
after the core to prevent
bulging through the
support ribs under load.
F5 coalescing filters are used for high
filtration of oil aerosols and sub micron
particles. They are often used with critical
instrumentation; paint spraying
equipment; more sophisticated air
systems; blow molding bottling; in the
food industry, and where air blows on a
finished product. The .01 micron grade
“A” element is offered for the most critical
filtration applications, such as those
found in clean rooms.
F6 adsorber filters were engineered
specifically for critical applications that
will not tolerate the presence of oil
vapors. If the compressed air has been
prepared by a suitable refrigerated dryer
and F5 oil removing filter, the F6 Adsorber
will insure oil concentrations of .01 PPM
by weight. In all cases, an F5A coalescing
filter must precede an F6 Adsorber filter.
To prevent any particle migration downstream, an F3 with 3 micron element
should be installed downstream for total
system protection.
4) Chemical resistant plastic
inner and outer support
ribs strengthen element
structure and prevent
damage to the element
under high differential
pressures and reverse flow
conditions.
5) Fiberglass drain layer
provides drainage vehicle,
prevents reentrainment of
droplets, and is not
affected by synthetic oils
and high temperatures.
Outer netting prevents
drain layer bulging and is
color coded to identify
element type.
!
12
▼
IMPORTANT: Oil captured by Arrow Coalescing Filters will not retrain
Coalescing Filters
and move downstream.
Tri●Star Oil Removing Filters
SPECIFICATIONS
Body black coated aluminum
Baffle plastic
Seals Buna N
Metal Bowl
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
KITS
●
Bowl Kits
● Metal bowl without sight . . . . BKF45M
● Metal bowl with sight . . . . . . BKF45W
Metal Bowl with Sight
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
●
●
●
●
●
●
●
Element Kit
● .9 micron 2-pack. . . . . . . . . . EK45
Orange netting or dot
Internal Float Drain Note: limits bowl
temperature and pressure rating.
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
.9 micron element
Low pressure drop
Long element life
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection requires
changing element at regular intervals.
6 oz. black coated metal bowl
with liquid level sight
Manual drain
In-line or modular installation
Internal float drain. . . . . . . . . 5200
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF45
● Replacement sight kit . . . . . . WK45
● Indicator pop-up kit . . . . . . . DPK-05
Element
● .9 micron borosilicate glass fiber
D.O.P. Efficiency: 95%, Particle size
removal, Remaining oil content by wt.:
2.5 PPM
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK5
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
Float Drain
F Internal float drain . . . . . . . . F452FW
For Metal Bowl without sight delete W
A
DIMENSIONS
PIPE
SIZE
B
D
BOWL
CAPACITY
DIMENSIONS (INCHES)
A
B
C
D
WEIGHT
(LBS.)
/49
F452W
27
6 oz.
23/4
3
75/8
21/2
1.7
/89
F453W
45
6 oz.
23/4
3
75/8
21/2
1.7
/29
F454W
53
6 oz.
23/4
3
75/8
21/2
1.7
1
C
MODEL NO.
MAX. FLOW
SCFM*
3
1
/4
/4
/4
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
▼
A
13
MidFlow Oil Removing Filters
SPECIFICATIONS
●
●
●
●
●
●
Metal Bowl with Sight
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
●
KITS
Internal Float Drain
Note: limits bowl temperature and
pressure rating.
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
●
Elements
.9 micron borosilicate glass filter
D.O.P. Efficiency: 95%, Particle size
removal, Remaining oil content by wt.:
2.5 PPM
Metal Bowl
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
.9 micron element
Low pressure drop
Long element life
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection requires
changing element at regular intervals.
10 oz. or 20 oz. black coated
metal bowl with liquid level sight
Manual twist drain
Body black coated aluminum
Baffle plastic
Seals Buna N
Internal float drain. . . . . . . . . 5200
Bowl Kits
● 10 oz. with sight . . . . . . . . . . BKF47W
● 10 oz. without sight. . . . . . . . BKF47M
● 20 oz. with sight . . . . . . . . . . BKF48W
● 20 oz. without sight . . . . . . . BKF48M
Element Kits
● .9 micron . . . . . . . . . . . . . . . EK47
Orange netting or dot
EK48
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF47
RKF48
● Replacement sight kit . . . . . . WK47
● Indicator pop-up kit . . . . . . . DPK-05
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
Float Drain
F Internal float drain . . . . . . . . F473FW
M Metal bowl
without sight glass . . . . . . . F473M
A. F473
B. F474
C. F476
D. F483
E. F484
F. F486
DIMENSIONS
A
A
PIPE
SIZE
B
10 oz.
33/4
11/8
81/4
3
2.7
/89
F483W
84
20 oz.
33/4
11/8
111/2
3
3.6
/29
F474W
83
10 oz.
33/4
11/8
81/4
3
2.7
/29
F484W
116
20 oz.
33/4
11/8
111/2
3
3.6
/49
F476W
98
10 oz.
33/4
11/8
81/4
3
2.7
/49
F486W
172
20 oz.
33/4
11/8
111/2
3
3.6
1
3
3
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
WEIGHT
(LBS.)
66
1
14
DIMENSIONS (INCHES)
A
B
C
D
F473W
3
C
BOWL
CAPACITY
/89
3
D
MODEL NO. MAX. FLOW
SCFM*
High Flow Oil Removing Filters
SPECIFICATIONS
●
●
●
●
Metal Bowl with sight
● Steel, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
●
KITS
.9 micron element
Manual twist drain
Low pressure drop
Long element life
OPTIONS
add suffix to part number in alpha and
numeric order
D Differential pressure gauge . F408-10D
Element Kits
● .9 micron F405 . . . . . . . . . . . EKF405
● .9 micron F408 . . . . . . . . . . . EKF408
Orange netting or dot
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF505
● Repair kit . . . . . . . . . . . . . . . RKF508
● Replacement sight kit 405 . . . WK35
● Replacement sight kit 408 . . . WK35
Body black coated aluminum
Baffle aluminum
Seals Buna N
Float Drain
An internal float rises as condensate accumulates in a filter bowl to activate the drain.
F Internal float drain. . . . . . . . F405-06FW
F408-08FW
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psi
Internal float drain kit . . . . . . 5200
Bowl Kits
● Metal with sight F405 . . . . . . BKF329W
● Metal without sight F405. . . . BKF329M
● Metal with sight F408 . . . . . . BKF364W
● Metal without sight F408. . . . BKF364
Internal Float Drain
● Buna N float
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
●
Elements
.9 micron borosilicate glass fiber
D.O.P. Efficiciency: 95%, Particle size
removal, Remaining oil content by wt.:
2.5 PPM
Metal Bowl
● Steel, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
PERFORMANCE CHARACTERISTICS
twist to manually drain . . . . . . . F408-08KW
For Metal Bowl without sight delete W
A
A
DIMENSIONS
B
B
BOWL
CAPACITY
MAX. FLOW
SCFM*
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
MODEL NO.
WEIGHT
(LBS.)
3
/49
F405-06W
29 oz.
185
47/8
13/16
913/32
3.7
19
F405-08W
29 oz.
185
47/8
13/16
913/32
3.7
19
F408-08W
60 oz.
300
47/8
13/16
1413/32
6.0
11/49
F408-10DW
60 oz.
300
55/32
33/4
163/4
6.3
11/29
F408-12DW
60 oz.
400
55/32
33/4
163/4
6.3
C
C
F405-06W
F405-08W
F408-08W
F408-10DW, F408-12DW
Coalescing Filters
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
15
High Flow Oil Removing Filters
SPECIFICATIONS
KITS
Metal Bowl
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Bowl Kits
● Metal without sight F410. . . . BKF510
● Metal with sight F410 . . . . . . BKF510W
● Metal without sight F418. . . . BKF518
● Metal with sight F418 . . . . . . BKF518W
● Metal without sight F428. . . . BKF528
● Metal with sight F428 . . . . . . BKF528W
Metal Bowl with sight
● Black coated Aluminum
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Gauge Optional
FEATURES
●
●
●
.9 micron element
Low pressure drop
Long element life
OPTIONS
add suffix to part number in alpha order
D Differential pressure gauge . F410-08D
T External Float Drain . . . . . . . F410-08T
W Metal bowl
with sight glass . . . . . . . . . .F410-08W
Float for External Drain . . . . . 5200
Element Kit
● .9 micron . . . . . . . . . . . . . . . EKF410, EKF418,
Orange netting or dot
EKF428
Body black coated aluminum
Baffle plastic
Seals Buna N
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511
● Replacement sight kit . . . . . . BSF510
Element
● .9 micron borosilicate glass filter
D.O.P. Efficiciency: 95%, Particle size
removal, Remaining oil content by
wt.: 2.5 PPM
PERFORMANCE CHARACTERISTICS
DIMENSIONS
A
PIPE
SIZE
B
MAX. FLOW
SCFM*
100 oz.
420
61/2
2
21
16
1 /49
F410-10
100 oz.
420
1
6 /2
2
21
16
1 /29
F410-12
100 oz.
475
6 /2
1 /29
F418-12
200 oz.
1
29
29
29
F410-16
F418-16
F428-16
100 oz.
200 oz.
300 oz.
2
21
16
590
1
6 /2
2
3
28 /4
19
475
1
6 /2
2
21
16
590
1
6 /2
2
3
28 /4
19
840
1
2
39
23
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
WEIGHT
(LBS.)
F410-08
1
16
DIMENSIONS (INCHES)
A
B
C
19
1
C
MODEL NO.
BOWL
CAPACITY
1
6 /2
Miniature Coalescing Filters
Elements
.03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM
● .01 micron borosilicate glass fiber
D.O.P. Efficiency: 99.999%, Particle
removal size, Remaining oil content by wt.:
.0005 PPM
SPECIFICATIONS
●
Polycarbonate Bowl
● Max. pressure 150 psig
● Operating temperature range
40˚F to 125˚F
Metal Bowl
● Black coated Aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 175˚F
Piston Drain
KITS
●
●
Note: Z option is differential drain which opens & ejects
FEATURES
●
●
●
Bowl Kits
● 1 oz. poly. bowl. . . . . . . . . . . BKF300
● 1 oz. poly. bowl
with piston drain. . . . . . . . . . BKF300J
● 1 oz. metal bowl . . . . . . . . . . BKF300M
● 1 oz. metal bowl
with overnight drain . . . . . . . BKF300KM
water only when a differential pressure is created at the
start of air flow. The piston drain lifts up (approx. 1
.03 micron fiber element
1 oz. polycarbonate bowl
Manual twist drain
second) & closes, it will not operate again until the flow
stops, then starts back up again.
●
OPTIONS
●
add suffix to part number in alpha order
A .01 micron element . . . . . . . F500-02A
Overnight Drains
When a compressed air system is shut
down, an overnight drain clears
accumulated condensate from a filter bowl
when the pressure falls to 3 psig or less.
J Overnight drain for
polycarbonate bowl . . . . . . .F500-02J
Push to manually drain.
K Overnight drain for
metal bowl . . . . . . . . . . . . .F500-02KM
Twist to manually drain.
M Metal bowl . . . . . . . . . . . . .F500-02M
Z Piston drain . . . . . . . . . . . .F500-02Z
Operating pressure range 30 to 175 psig
Operating temperature range
40˚F to 120˚F
Element Kits
● .03 micron 2-pack. . . . . . . . . EKF500
Clear net or no color
● .01 micron 2-pack. . . . . . . . . EKF500A
Red net or dot
Body
● Black coated aluminum
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK3
PERFORMANCE CHARACTERISTICS
A
DIMENSIONS
B
A
PIPE
SIZE
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
/8 9
F500-01
15
1 oz.
/49
F500-02
15
1 oz.
1
C
1
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
18
Coalescing Filters
Piston drain . . . . . . . . . . . . . PKF300
Overnight Metal (K). . . . . . . . CKFK
DIMENSIONS (INCHES)
A
B
C
11/2
11/2
/2
WEIGHT
(LBS.)
1
41/2
.5
1
41/2
.5
/2
Tri●Star Coalescing Filters
SPECIFICATIONS
●
Body Black coated aluminum
Baffle plastic
Seals Buna N
KITS
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
.03 micron fiber element
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection requires
changing element at regular intervals.
Low pressure drop
6 oz. black coated metal bowl with
liquid level sight
Black coated aluminum housing
Manual drain
In line or modular installation
●
●
●
●
●
●
Bowl Kits
● Metal without sight . . . . . . . . BKF45M
● Metal with sight . . . . . . . . . . BKF45W
Element Kits
● .03 micron 2-pack. . . . . . . . . EK55
Clear net no color
● .01 micron 2-pack. . . . . . . . . EK55A
Red net or dot
Internal Float Drain
plastic, metal, brass, Buna N seal
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
OPTIONS
Internal float drain kit . . . . . . 5200
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF45
● Replacement sight kit . . . . . . WK35
● Indicator Pop-up kit . . . . . . . DPK-05
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK3
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM
add suffix to part number in alpha order
A .01 micron element . . . . . . . F552AW
Float Drain
F Internal float drain . . . . . . . . F552FW
PERFORMANCE CHARACTERISTICS
For Metal Bowl without sight delete W
A
DIMENSIONS
A
B
D
PIPE
SIZE
BOWL
CAPACITY
/49
F552W
24
6 oz.
23/4
3
75/8
21/2
1.7
/89
F553W
37
6 oz.
23/4
3
75/8
21/2
1.7
/29
F554W
37
6 oz.
23/4
3
75/8
21/2
1.7
1
C
DIMENSIONS (INCHES)
A
B
C
D
MODEL NO.
MAX. FLOW
SCFM*
3
1
/4
/4
/4
WEIGHT
(LBS.)
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
▼
●
●
Metal Bowl with Sight nickel plated zinc
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
FEATURES
.01 micron borosilicate glass fiber
D.O.P. Efficiency: 99.999%, Particle size
removal, Remaining oil content by wt.:
.0005 PPM
19
MidFlow Coalescing Filters
SPECIFICATIONS
●
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
KITS
●
Metal Bowl with Sight
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
.03 micron fiber element
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection requires
changing element at regular intervals.
Low pressure drop
10 oz. or 20 oz. black coated metal
bowl with liquid level sight
Manual drain
●
●
●
●
●
●
Element Kits
● .03 micron . . . . . . . . . . . . . .
Clear net no color . . . . . . . . .
● .01 micron . . . . . . . . . . . . . .
Red net or dot . . . . . . . . . . .
Body Black coated aluminum
Baffle plastic
Seals Buna N
add suffix to part number in alpha order
A .01 micron element . . . . . . . F573AW
Float Drain
F Internal float drain . . . . . . . . F573FW
K Overnight drain . . . . . . . . . . F573KW
M Black coated metal bowl . . . F573M
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
PERFORMANCE CHARACTERISTICS
DIMENSIONS
A
A
PIPE
SIZE
B
WEIGHT
(LBS.)
10
33/4
11/8
81/4
3
2.7
/89
F583W
72
20
33/4
11/8
111/2
3
3.6
/29
F574W
55
10
33/4
11/8
81/4
3
2.7
/29
F584W
90
20
33/4
11/8
111/2
3
3.6
/49
F576W
60
10
33/4
11/8
81/4
3
2.7
/49
F586W
110
20
33/4
11/8
111/2
3
3.6
1
3
3
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
▼
DIMENSIONS (INCHES)
B
C
D
48
1
Coalescing Filters
A
F573W
3
C
MODEL NO. MAX. FLOW BOWL
SCFM* CAPACITY
/89
3
D
20
EK57
EK58
EK57A
EK58A
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF47, RKF48
● Replacement sight kit . . . . . . WK37
● Indicator Pop-up kit . . . . . . .DPK-05
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM
OPTIONS
Internal float drain kit . . . . . . 5200
Overnight Metal (K) . . . . . . . .CKFK
Bowl Kits
● 10 oz. with sight . . . . . . . . . . BKF47W
● 10 oz. without sight. . . . . . . . BKF47M
● 20 oz. with sight . . . . . . . . . . BKF48W
● 20 oz. without sight . . . . . . . BKF48M
Internal Float Drain Note: limits bowl
temperature and pressure ratings
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
.01 micron borosilicate glass fiber, D.O.P.
Efficiency: 99.999%, Particle size
removal, Remaining oil content by wt.:
.0005 PPM
High Flow Coalescing Filters
SPECIFICATIONS
Elements
.03 micron borosilicate glass filter
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM
● .01 micron borosilicate glass filter
D.O.P. Efficiency: 99.999%, Particle size
removal, Remaining oil content by wt.:
.0005 PPM
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Metal Bowl with sight
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
KITS
Internal float drain kit . . . . . . 5200
Overnight Drain Kit (K) . . . . . CKFK
Bowl Kits
● Metal with sight F505 . . . . . . BKF329W
● Metal without sight F505. . . . BKF329M
● Metal with sight F508 . . . . . . BKF364W
● Metal without sight F508. . . . BKF364M
Element Kits
● .03 micron 505 (Clear net) . . EKF505
● .01 micron 505 (Red net) . . . EKF505A
● .03 micron 508 (Clear net) . . EKF508
● .01 micron 508 (Red net) . . . EKF508A
Repair Kits
● Repair kit 505 . . . . . . . . . . . . RKF505
● Repair kit 508 . . . . . . . . . . . . RKF508
● Replacement sight kit . . . . . . WK35
●
●
Internal Float Drain
● Buna N float
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
●
●
●
.03 micron fiber element
Manual drain
Low pressure drop
Body black coated aluminum
Baffle aluminum
Seals Buna N
OPTIONS
add suffix to part number in alpha and
numeric order
A .01 micron element . . . . . . . F505-06A
D Differential pressure gauge . F508-10D
Float Drain
F Internal float drain . . . . . . . . F505-06FW
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psi.
Twist to manually drain . . . . F508-08KW
PERFORMANCE CHARACTERISTICS
For Metal Bowl without sight delete W
A
A
DIMENSIONS
B
B
DIMENSIONS (INCHES)
A
B
C
MODEL NO.
BOWL
CAPACITY
MAX. FLOW
SCFM*
/49
F505-06W
29 oz.
185
47/8
13/16
913/32
3.7
19
F505-08W
29 oz.
185
47/8
13/16
913/32
3.7
19
F508-08W
60 oz.
300
47/8
13/16
1413/32
6.0
11/49
F508-10W
60 oz.
300
55/32
33/4
163/4
6.3
11/29
F508-12W
60 oz.
400
55/32
33/4
163/4
6.3
PIPE
SIZE
3
WEIGHT
(LBS.)
C
C
F505-06W
F505-08W
F505-08W
F508-10DW, F508-12DW
Coalescing Filters
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
21
High Flow Coalescing Filters
SPECIFICATIONS
KITS
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Bowl Kit
● Metal with sight . . . . . . . . . . BKF510W
● Metal without sight
. . . . . . . BKF510
● Metal with sight . . . . . . . . . . BKF518W
● Metal without sight
. . . . . . . BKF518
● Metal with sight . . . . . . . . . . BKF528W
● Metal without sight
. . . . . . . BKF528
Metal Bowl with Sight
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Gauge Optional
FEATURES
●
●
●
.03 micron fiber element
Low pressure drop
Manual drain
OPTIONS
add suffix to part number in alpha order
A .01 micron element . . . . . . . F510-08A
D Differential pressure gauge . F510-08D
T External Float Drain . . . . . . . F510-08T
W Metal bowl
with sight glass. . . . . . . . . . F510-08W
Float for External Drain . . . . .5200
Body Black coated aluminum
Baffle plastic
Seals Buna N
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM
● .01 micron borosilicate glass fiber
D.O.P. Efficiency: 99.999%, Particle size
removal, Remaining oil content by wt.:
.0005 PPM
Element Kits
● .03 micron . . . . . . . . . . . . . . EKF510,
Clear net no color . . . . . . . . . EKF518, EKF528
● .01 micron . . . . . . . . . . . . . . EKF510A,
Red net or dot . . . . . . . . . . . EKF518A, EKF528A
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511, RKF519,
RKF529
● Replacement sight kit . . . . . . BSF510
PERFORMANCE CHARACTERISTICS
DIMENSIONS
A
B
C
MAX. FLOW
SCFM*
19
F510-08
100 oz.
310
61/2
2
21
16
11/49
F510-10
100 oz.
310
61/2
2
21
16
11/29
F510-12
100 oz.
415
61/2
2
21
16
11/29
F518-12
200 oz.
515
61/2
2
283/4
19
415
1
6 /2
2
21
16
515
1
6 /2
2
3
28 /4
19
6 /2
2
39
23
29
29
F510-16
F518-16
100 oz.
200 oz.
▼
29
F528-16
300 oz.
765
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
22
Coalescing Filters
DIMENSIONS (INCHES)
A
B
C
MODEL NO.
BOWL
CAPACITY
PIPE
SIZE
1
WEIGHT
(LBS.)
High Flow Coalescing Filters
SPECIFICATIONS
KITS
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Metal Bowl with Sight
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Gauge Optional
FEATURES
●
●
.03 micron fiber element
Low pressure drop
Manual drain
OPTIONS
add suffix to part number in alpha order
A .01 micron element . . . . . . . F511-24A
D Differential pressure gauge . . F511-24D
T External Float Drain . . . . . . . F511-24T
W Metal bowl
with sight glass. . . . . . . . . . F511-24W
Element Kits
● .03 micron . . . . . . . . . . . . . . EKF511
Clear net no color
EKF519
EKF529
● .01 micron . . . . . . . . . . . . . . EKF511A
Red net or dot
EKF519A
EKF529A
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511
RKF519
RKF529
● Replacement sight kit . . . . . . BSF510
Body Black coated aluminum
Baffle plastic
Seals Buna N
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM
● .01 micron borosilicate glass fiber
D.O.P. Efficiency: 99.999%, Particle size
removal, Remaining oil content by wt.:
.0005 PPM
PERFORMANCE CHARACTERISTICS
DIMENSIONS
A
B
C
DIMENSIONS (INCHES)
A
B
C**
PIPE
SIZE
MODEL NO.
BOWL
CAPACITY
39
F511-24
100 oz.
620
75/8
21/4
2211/16
21
39
F519-24
200 oz.
770
75/8
21/4
313/16
24
39
F529-24
300 oz.
1100
75/8
21/4
417/16
28
MAX. FLOW
SCFM*
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
WEIGHT
(LBS.)
** Add 3/4” to height (c) if ordered with gauge
Coalescing Filters
▼
●
Float for External Drain . . . . .5200
Bowl Kits
● Metal with sight . . . . . . . . . . BKF510W
● Metal without sight . . . . . . . . BKF510
● Metal with sight . . . . . . . . . . BKF518W
● Metal without sight . . . . . . . . BKF518
● Metal with sight . . . . . . . . . . BKF529W
● Metal without sight . . . . . . . . BKF529
23
Tri●Star Adsorber Filters
downstream for total system protection.
Body Black coated aluminum
Baffle plastic
Seals Buna N
SPECIFICATIONS
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
Bowl Kits
Metal bowl without sight . . . . BKF45M
● Metal bowl with sight . . . . . . BKF45W
●
Metal Bowl with Sight
● Zinc black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Protects end processes from gaseous oil
contamination and rids compressed air of
offensive oily odors
Removes hydrocarbons for use in
analytical instruments
Low pressure drop
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection
requires changing element at regular
intervals.
6 oz. black coated metal bowl with
liquid level sight
Black coated aluminum housing
Manual drain
In-line or modular installation
●
●
●
●
●
●
●
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF45
● Replacement sight kit . . . . . . WK35
● Indicator Pop-up kit . . . . . . . DPK-05
Element
● Multi-wrapped layers of impregnated
activated charcoal particles to increase
purification qualities. If the compressed
air has been prepared by a suitable
refrigerated dryer and F5A Oilescer filter,
the F6 Absorber will insure oil concentrations of .0015 PPM by weight. In all
cases, an F5 Oilescer must precede an F6
Absorber. To prevent any particle
migration downstream an F3 with 3
micron element should be installed
FEATURES
●
Element Kits
● Charcoal wrapped 2-pack . . . EK65
Clear net no color
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK5
APPLICATIONS
●
●
●
Food plants
Pharmaceutical
Instrumentation
PERFORMANCE CHARACTERISTICS
OPTIONS
For Metal Bowl without sight delete W
A
DIMENSIONS
A
B
D
PIPE
SIZE
BOWL
CAPACITY
/49
F652W
24
6 oz.
23/4
3
/4
75/8
21/2
1.7
/89
F653W
37
6 oz.
23/4
3
/4
75/8
21/2
1.7
/29
F654W
37
6 oz.
23/4
3
/4
75/8
21/2
1.7
1
C
3
1
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
24
Coalescing Filters
DIMENSIONS (INCHES)
A
B
C
D
MODEL NO.
MAX. FLOW
SCFM*
WEIGHT
(LBS.)
MidFlow Adsorber Filters
Body Black coated aluminum
Baffle plastic
Seals Buna N
SPECIFICATIONS
Metal Bowl
● Zinc black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
Bowl Kits
Metal bowl without sight . . . . BKF47M
● Metal bowl with sight . . . . . . BKF47W
●
Metal Bowl with Sight
● Zinc black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Element
● Multi-wrapped layers of impregnated
activated charcoal particles to increase
purification qualities. If the compressed
air has been prepared by a suitable
refrigerated dryer and F5A Oilescer filter,
the F6 Absorber will insure oil concentrations of .0015 PPM by weight. In all
cases, an F5 Oilescer must precede an F6
Absorber. To prevent any particle
migration downstream an F3 with 3
micron element should be installed
downstream for total system protection.
FEATURES
●
●
●
●
●
●
●
Element Kits
● Charcoal wrapped 2-pack . . . EK67, EK68
Clear net no color
Protects end processes from gaseous oil
contamination and rids compressed air of
offensive oily odors
Removes hydrocarbons for use in
analytical instruments
Low pressure drop
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection requires
changing element at regular intervals.
10 oz./20 oz. black coated metal bowl
with liquid level sight
Black coated aluminum housing
Manual drain
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF47, RKF48
● Replacement sight kit . . . . . . WK37
● Indicator Pop-up kit . . . . . . . DPK-05
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
APPLICATIONS
●
●
●
Food plants
Pharmaceutical
Instrumentation
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
M Metal bowl
without sight glass . . . . . . . . F673M
DIMENSIONS
A
PIPE
SIZE MODEL NO.
B
BOWL
CAPACITY
A
DIMENSIONS (INCHES)
B
C
D
WEIGHT
(LBS.)
/89
F673W
48
10 oz.
33/4
11/8
81/4
3
2.7
/89
F683W
72
20 oz.
33/4
11/8
111/2
3
3.8
/29
F674W
56
10 oz.
33/4
11/8
81/4
3
2.7
/29
F684W
90
20 oz.
33/4
11/8
111/2
3
3.8
/49
F676W
60
10 oz.
33/4
11/8
81/4
3
2.7
/49
F686W
110
20 oz.
33/4
11/8
111/2
3
3.8
3
D
3
C
MAX. FLOW
SCFM*
1
1
3
3
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
▼
A
25
High Flow Adsorber Filters
SPECIFICATIONS
Body Black coated aluminum
Metal Bowl
● Steel, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
(Note: F608 Series blue aluminum)
Baffle aluminum
Seals Buna N
Bowl Kits
● Metal bowl with sight . . . . . . BKF329W
● Metal bowl without sight . . . . BKF329M
● Metal bowl with sight . . . . . . BKF364W
● Metal bowl without sight . . . . BKF364
Metal Bowl with sight
● Steel, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Element
FEATURES
●
●
●
●
●
●
Protects end processes from gaseous oil
contamination and rids compressed air of
offensive oily odors
Removes hydrocarbons for use in
analytical instruments
Low pressure drop
Black coated bowl
Manual drain
OPTIONS
Multi-wrapped layers of impregnated activated
charcoal particles to increase purification
qualities. If the compressed air has been
prepared by a suitable refrigerated dryer and F5A
Oilescer filter, the F6 Absorber will insure oil
concentrations of .0015 PPM by weight. In all
cases, an F5 Oilescer must precede an F6
Absorber. To prevent any particle migration
downstream an F3 with 3 micron element should
be installed downstream for total system
protection.
A
C
26
▼
F608-10DW, F608-12DW
Coalescing Filters
●
●
Food plants
Pharmaceutical
Instrumentation
DIMENSIONS
B
B
F605-06W
F605-08W
F608-08W
APPLICATIONS
PERFORMANCE CHARACTERISTICS
For Metal Bowl without sight delete W
C
Repair Kit
● Repair kit . . . . . . . . . . . . . . . RKF505
RKF508
● Replacement sight kit . . . . . . WK35
●
add suffix to part number in alpha order
D Differential pressure gauge . . F608-10D
A
Element Kits
● Charcoal wrapped 605 . . . . . EKF605
Clear net no color
● Charcoal wrapped 608 . . . . . EKF608
BOWL
CAPACITY
MAX. FLOW
SCFM*
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
MODEL NO.
3
/49
F605-06W
29 oz.
185
47/8
13/16
913/32
3.7
19
F605-08W
29 oz.
185
47/8
13/16
913/32
3.7
19
F608-08W
60 oz.
300
47/8
13/16
1413/32
6.0
11/49
F608-10W
60 oz.
300
51/4
11/2
163/4
6.3
11/29
F608-12W
60 oz.
400
51/4
11/2
163/4
6.3
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
WEIGHT
(LBS.)
High Flow Adsorber Filters
SPECIFICATIONS
KITS
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Bowl Kits
● Metal bowl with sight . . . . . . BKF510W
● Metal bowl without sight . . . . BKF510M
● Metal bowl with sight . . . . . . BKF518W
● Metal bowl without sight . . . . BKF518M
● Metal bowl with sight . . . . . . BKF528W
● Metal bowl without sight . . . . BKF528M
Metal Bowl with Sight
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Gauge Optional
FEATURES
●
●
●
Protects end processes from gaseous oil
contamination and rids compressed air of
offensive oily odors
Removes hydrocarbons for use in
analytical instruments
Low pressure drop
Manual drain
OPTIONS
add suffix to part number in alpha order
D Differential pressure gauge . F610-10D
T External Float Drain . . . . . . . F610-10T
W Metal bowl
with sight glass. . . . . . . . . . F610-10W
Element Kits
● Charcoal wrapped 2-pack . . . EKF610, EKF618,
Clear net no color . . . . . . . . . EKF628
Body Black coated aluminum
Baffle plastic
Seals Buna N
Element
●
Multi-wrapped layers of impregnated activated
charcoal particles to increase purification
qualities. If the compressed air has been
prepared by a suitable refrigerated dryer and F5A
Oilescer filter, the F6 Absorber will insure oil concentrations of .0015 PPM by weight. In all cases,
an F5 Oilescer must precede an F6 Absorber. To
prevent any particle migration downstream an F3
with 3 micron element should be installed
downstream for total system protection.
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511
RKF519
RKF529
● Replacement sight kit . . . . . . BSF510
APPLICATIONS
●
●
●
Food plants
Pharmaceutical
Instrumentation
PERFORMANCE CHARACTERISTICS
DIMENSIONS
A
B
C
BOWL
CAPACITY
MAX. FLOW
SCFM*
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
MODEL NO.
WEIGHT
(LBS.)
19
F610-08
100 oz.
420
61/2
2
21
16
11/49
F610-10
100 oz.
420
61/2
2
21
16
11/29
F610-12
100 oz.
475
61/2
2
21
16
11/29
F618-12
200 oz.
590
61/2
2
283/4
19
29
F610-16
100 oz.
475
61/2
2
21
16
29
F618-16
200 oz.
590
61/2
2
283/4
19
29
F628-16
300 oz.
840
61/2
2
39
23
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
▼
●
Float for External Drain . . . . .5200
27
High Flow Adsorber Filters
Gauge Optional
FEATURES
●
●
●
●
Protects end processes from gaseous oil
contamination and rids compressed air of
offensive oily odors
Removes hydrocarbons for use in
analytical instruments
Low pressure drop
Manual drain
OPTIONS
add suffix to part number in alpha order
D Differential pressure gauge . . F611-24D
T External Float Drain . . . . . . . . F611-24T
W Metal bowl
with sight glass . . . . . . . . . . . F611-24W
SPECIFICATIONS
KITS
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
Bowl Kits
● Metal bowl with sight . . . . . . BKF510W
● Metal bowl without sight . . . . BKF510M
● Metal bowl with sight . . . . . . BKF518W
● Metal bowl without sight . . . . BKF518M
● Metal bowl with sight . . . . . . BKF528W
● Metal bowl without sight . . . . BKF528M
Metal Bowl with Sight
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Element Kits
● Charcoal wrapped 2-pack . . . EKF611, EKF619,
Clear net no color . . . . . . . . . EKF629
Body Black coated aluminum
Baffle plastic
Seals Buna N
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511
RKF519
RKF529
● Replacement sight kit . . . . . . BSF510
Element
●
Multi-wrapped layers of impregnated activated
charcoal particles to increase purification qualities. If the compressed air has been prepared by
a suitable refrigerated dryer and F5A Oilescer
filter, the F6 Absorber will insure oil concentra
tions of .0015 PPM by weight. In all cases, an F5
Oilescer must precede an F6 Absorber. To
prevent any particle migration downstream an F3
with 3 micron element should be installed
downstream for total system protection.
APPLICATIONS
●
●
●
DIMENSIONS
B
C
▼
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
MODEL NO.
BOWL
CAPACITY
39
F611-24
100 oz.
620
75/8
21/4
2211/16
21
39
F619-24
200 oz.
770
75/8
21/4
313/16
24
39
F629-24
300 oz.
1100
75/8
21/4
417/16
28
MAX. FLOW
SCFM*
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
Food plants
Pharmaceutical
Instrumentation
PERFORMANCE CHARACTERISTICS
A
28
Float for External Drain . . . . .5200
WEIGHT
(LBS.)
MidFlow Two-in-One Coalescing Filters
SPECIFICATIONS
KITS
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
●
●
Bowl Kits
● 10 oz. with sight . . . . . . . . . . BKF47W
● 10 oz. without sight. . . . . . . . BKF47M
● 20 oz. with sight . . . . . . . . . . BKF48W
● 20 oz. without sight . . . . . . . BKF48M
Metal Bowl with Sight
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
●
●
●
●
3 Micron absolute protection for .03
micron coalescing element
Pop-up indicator indicates abnormal
condition such as plugged element or
excessive flow. Critical protection requires
changing element at regular intervals.
Low pressure drop
10 oz. or 20 oz. black coated metal
bowl with liquid level sight
Manual drain
Repair Kits
●
Body Black coated aluminum
Baffle plastic
Seals Buna N
●
●
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM with 3 micron absolute
protection
OPTIONS
add suffix to part number in alpha order
Float Drain
F Internal float drain . . . . . . . . F773FW
K Overnight drain . . . . . . . . . . F773KW
M Black coated metal bowl . . . F773M
Repair kit . . . . . . . . . . . . . . . RKF47, RKF48
Replacement sight kit . . . . . . WK37
Indicator Pop-up kit . . . . . . .DPK-05
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
PERFORMANCE CHARACTERISTICS
A. F773W - 3/8”
B. F774W - 1/2”
C. F776W - 3/4”
D. F783W - 3/8”
E. F784W - 1/2”
F. F786W - 3/4”
DIMENSIONS
A
A
PIPE
SIZE
B
A
DIMENSIONS (INCHES)
B
C
D
WEIGHT
(LBS.)
/89
F773W
48
10
33/4
11/8
81/4
3
2.7
/89
F783W
72
20
33/4
11/8
111/2
3
3.6
/29
F774W
55
10
33/4
11/8
81/4
3
2.7
/29
F784W
90
20
33/4
11/8
111/2
3
3.6
/49
F776W
60
10
33/4
11/8
81/4
3
2.7
/49
F786W
110
20
33/4
11/8
111/2
3
3.6
3
D
3
C
MODEL NO. MAX. FLOW BOWL
SCFM* CAPACITY
1
1
3
3
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
Coalescing Filters
▼
●
Element Kits
● .03 micron . . . . . . . . . . . . . . EK77
Clear net no color . . . . . . . . . EK78
Internal Float Drain Note: limits bowl
temperature and pressure ratings
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
Internal float drain kit . . . . . . 5200
Overnight Metal (K) . . . . . . . .CKFK
29
High Flow Two-in-One Coalescing Filters
SPECIFICATIONS
.03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM with 3 micron absolute
protection
●
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
KITS
●
Metal Bowl with sight
● Zinc, black coated
● Max. supply pressure 250 psig
● Operating temperature range
40˚F to 160˚F
●
●
●
Internal Float Drain
● Buna N float
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psig
● Operating temperature range
40˚F to 120˚F
FEATURES
●
Internal float drain kit . . . . . . 5200
Overnight Drain Kit (K) . . . . . CKFK
Bowl Kits
● Metal with sight F505 . . . . . . BKF329W
● Metal without sight F505. . . . BKF329M
● Metal with sight F508 . . . . . . BKF364W
● Metal without sight F508. . . . BKF364M
Element Kits
● .03 micron 505 (Clear net) . . EKF705
● .03 micron 508 (Clear net) . . EK708
●
3 Micron absolute protection for .03
micron coalescing element
Manual drain
Low pressure drop
OPTIONS
Repair Kits
● Repair kit 505 . . . . . . . . . . . . RKF505
● Repair kit 508 . . . . . . . . . . . . RKF508
● Replacement sight kit . . . . . . WK35
Body black coated aluminum
Baffle aluminum
Seals Buna N
Elements
add suffix to part number in alpha and
numeric order
D Differential pressure gauge . F708-10D
Float Drain
F Internal float drain . . . . . . . . F705-06FW
Overnight Drains
An overnight drain operates when a
compressed air system is shut down. It
clears accumulated condensate from a filter
bowl when pressure falls to 3 psig or less.
It then closes when pressure rises to 6 psi.
Twist to manually drain . . . . F708-08KW
PERFORMANCE CHARACTERISTICS
A. F705-06W - 3/4”
F705-08W - 1”
B. F708-08W - 1”
F708-10DW - 1 1/4”
C. F708-12DW - 1 1/2”
For Metal Bowl without sight delete W
A
A
DIMENSIONS
B
B
DIMENSIONS (INCHES)
A
B
C
MODEL NO.
BOWL
CAPACITY
MAX. FLOW
SCFM*
3
/49
F705-06W
29 oz.
185
47/8
13/16
913/32
3.7
19
F705-08W
29 oz.
185
47/8
13/16
913/32
3.7
19
F708-08W
60 oz.
300
47/8
13/16
1413/32
6.0
11/49
F708-10W
60 oz.
300
55/32
33/4
163/4
6.3
11/29
F708-12W
60 oz.
400
55/32
33/4
163/4
6.3
PIPE
SIZE
WEIGHT
(LBS.)
C
C
F705-06W
F705-08W
F705-08W
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
30
▼
F708-10W, F708-12W
Coalescing Filters
High Flow Two-in-One Coalescing Filters
SPECIFICATIONS
KITS
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
Gauge Optional
●
Bowl Kit
● Metal with sight . . . . . . . . . . BKF510W
● Metal without sight
. . . . . . . BKF510
● Metal with sight . . . . . . . . . . BKF518W
● Metal without sight
. . . . . . . BKF518
● Metal with sight . . . . . . . . . . BKF528W
● Metal without sight
. . . . . . . BKF528
Metal Bowl with Sight
● Black Coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Element Kits
● .03 micron . . . . . . . . . . . . . . EKF710,
Clear net no color . . . . . . . . . EKF718, EKF728
Body Black coated aluminum
Baffle plastic
Seals Buna N
FEATURES
●
●
3 Micron absolute protection for .03
micron coalescing element
Low pressure drop
Manual drain
OPTIONS
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM with 3 micron absolute
protection
add suffix to part number in alpha order
D Differential pressure gauge . F710-08D
T External Float Drain . . . . . . . F710-08T
W Metal bowl
with sight glass. . . . . . . . . . F710-08W
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511, RKF519,
RKF529
● Replacement sight kit . . . . . . BSF510
PERFORMANCE CHARACTERISTICS
A. F710-08 - 1”
F710-10 - 1 1/4”
B. F710-12 - 1 1/4”
F710-16 - 2”
C. F718-12 - 1 1/2”
F718-16 - 2”
D. F728-16 - 2”
A
DIMENSIONS
B
MODEL NO.
BOWL
CAPACITY
MAX. FLOW
SCFM*
19
F710-08
100 oz.
420
61/2
2
21
16
1 /49
F710-10
100 oz.
420
1
6 /2
2
21
16
1 /29
F710-12
100 oz.
475
6 /2
1
1 /29
F718-12
200 oz.
29
F710-16
29
F718-16
1
C
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
1
2
21
16
590
1
6 /2
2
3
28 /4
19
100 oz.
475
61/2
2
21
16
200 oz.
590
61/2
2
283/4
19
61/2
2
39
23
29
F728-16
300 oz.
840
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
1
WEIGHT
(LBS.)
Coalescing Filters
▼
●
Float for External Drain . . . . .5200
31
High Flow Two-in-One Coalescing Filters
SPECIFICATIONS
KITS
Metal Bowl
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
Gauge Optional
Bowl Kits
● Metal with sight . . . . . . . . . . BKF510W
● Metal without sight . . . . . . . . BKF510
● Metal with sight . . . . . . . . . . BKF518W
● Metal without sight . . . . . . . . BKF518
● Metal with sight . . . . . . . . . . BKF529W
● Metal without sight . . . . . . . . BKF529
Metal Bowl with Sight
● Black coated aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 160˚F
Element Kits
● .03 micron . . . . . . . . . . . . . . EKF711
Clear net no color
EKF719
EKF729
Repair Kits
● Repair kit . . . . . . . . . . . . . . . RKF511
RKF519
RKF529
● Replacement sight kit . . . . . . BSF510
Body Black coated aluminum
Baffle plastic
Seals Buna N
FEATURES
●
●
●
3 Micron absolute protection for .03
micron coalescing element
Low pressure drop
Manual drain
OPTIONS
Elements
● .03 micron borosilicate glass fiber
D.O.P. Efficiency: 99.97%, Particle size
removal, Remaining oil content by wt.:
.015 PPM with 3 micron absolute
protection
add suffix to part number in alpha order
D Differential pressure gauge . SF711-24D
T External Float Drain . . . . . . . F711-24T
W Metal bowl
with sight glass . . . . . . . . . . F711-24W
Float for External Drain . . . . .5200
●
PERFORMANCE CHARACTERISTICS
A. F711-24 - 3”
B. F719-24 - 3”
C. F729-24 - 3”
A
DIMENSIONS
B
C
MODEL NO.
BOWL
CAPACITY
39
F711-24
100 oz.
620
75/8
21/4
2211/16
21
39
F719-24
200 oz.
770
75/8
21/4
313/16
24
39
F729-24
300 oz.
1100
75/8
21/4
417/16
28
MAX. FLOW
SCFM*
▼
* Flow scfm based on 2.5 psi ▲ p @ 100 psig inlet.
32
Coalescing Filters
DIMENSIONS (INCHES)
A
B
C
PIPE
SIZE
WEIGHT
(LBS.)
REGULATORS
Pneumatic devices are designed to work
at a certain pressure. Most devices will
operate at pressures in excess of that
recommended. However, operating at
higher pressures can cause excess
torque, force and wear and can waste
compressed air. The best operation and
life of the device can be obtained by using
the proper pressure level. A regulator is
used to reduce and maintain the pressure
at a level suitable for the device.
Arrow’s quality Regulators include the
Miniature Series which are high
performance, low cost regulators for the
O.E.M. market and low flow applications
up to 25 scfm. Arrow’s Tri•Star Series are
compact, lightweight regulators
engineered for superior performance in a
wide range of applications where air flow
does not exceed 100 scfm. Arrow’s
Midflow Series regulators are compact
and available in 3/8”, 1/2”, 3/4” & 1”
with air flows exceeding 200 SCFM.
Arrow’s High Flow Series heavy duty
regulators are for rigorous applications
requiring constant pressure for flows up
to 700 scfm.
The General Purpose Precision Series
features state-of-the-art engineering for
precision control in critical tolerance
applications. These regulators are
available in standard and pilot operated
models for both low and high flow
applications. The Arrow Precision
Regulator lineup can be tailored to fit your
specific needs. All Arrow regulators are
easily panel mounted. All Arrow
regulators are designed with a micro seat
finish to ensure no reduced pressure
Regulators
▼
creep.
33
Miniature Air Regulators
SPECIFICATIONS
KITS
Body
● Zinc, black coated
Panel Mounting Kit
● Ring only,
panel hole size 13/169 . . . . . . . PK1611
Bonnet
● Glass filled nylon
Diaphragm Kits
● Relieving . . . . . . . . . . . . . . . RK260
● Non-relieving . . . . . . . . . . . . RK260N
Seals
● Buna N
Bracket Kit see page 65
● Bracket and ring . . . . . . . . . . BR1611
Supply Pressure
● 250 psig
Operating Pressure Range
● 5 to 125 psig standard
● 3 to 60 psig optional
● 3 to 20 psig optional
FEATURES
●
●
●
●
●
●
Micro seat finish to ensure
no reduced pressure creep
Diaphragm operation
Relieving style standard
Three position non-rising adjustment
knob; push to lock, pull to adjust,
detach to make tamper resistant
Easily panel mounted
Tamper-proof cap included
Operating Temperature Range
● 40˚F to 120˚F
Gauge Ports
● 1/89 standard, full flow
OPTIONS
add suffix to part number in alpha order
B 2-Position mechanical
Lock Knob . . . . . . . . . . . R162B
G Gauge (5-160 psi) . . . . . . R162G
I Instrument pressure . . . . R162I
3 to 20 psi adjustment
L Low pressure . . . . . . . . . R162L
3 to 60 psi adjustment
N Non-relieving . . . . . . . . . R162N
P Panel mount . . . . . . . . . . R162P
U No gauge ports . . . . . . . . R162U
PERFORMANCE CHARACTERISTICS
5-125 psi
3-60 psi
DIMENSIONS
A
/89
R161
25
11/2
1
23/4
11/4
6
/49
R162
25
11/2
1
23/4
11/4
6
D
1
C
+
B
34
▼
A
Regulators
DIMENSIONS (INCHES)
B
C
D
MODEL NO.
MAX. FLOW
SCFM
PIPE
SIZE
1
/2
/2
WEIGHT
(OZS.)
Miniature Air Regulators
SPECIFICATIONS
KITS
Body
● Glass filled nylon
Panel Mounting Kit
● Ring only,
panel hole size 13/169 . . . . . . . PK1611
Bonnet
● Glass filled nylon
Diaphragm Kits
● Relieving . . . . . . . . . . . . . . . RK260
● Non-relieving . . . . . . . . . . . . RK260N
Seals
● Buna N
Bracket Kit see page 65
● Bracket and ring . . . . . . . . . . BR1611
Supply Pressure
● 250 psig
FEATURES
●
●
●
●
●
●
●
Applications
● Non-relieving diaphragm can be used on
liquid applications
Operating Pressure Range
● 5 to 125 psig standard
● 3 to 60 psig optional
● 3 to 20 psig optional
Micro seat finish to ensure
no reduced pressure creep
Diaphragm operation
Relieving style standard
Three position non-rising adjustment
knob; push to lock, pull to adjust,
detach to make tamper resistant
Easily panel mounted
Tamper-proof cap included
Lightweight
Operating Temperature Range
● 40˚F to 120˚F
Gauge Ports
● 1/89 standard, full flow
OPTIONS
PERFORMANCE CHARACTERISTICS
add suffix to part number in alpha order
B 2-Position Mechanical
Lock Knob . . . . . . . . . . . R262B
G Gauge (0-160 psi) . . . . . . R262G
I Instrument pressure . . . . R262I
3 to 20 psi adjustment
L Low pressure . . . . . . . . . R262L
3 to 60 psi adjustment
N Non-relieving . . . . . . . . . R262N
P Panel mount . . . . . . . . . . R262P
U No gauge ports . . . . . . . . R262U
V All 1/49 ports . . . . . . . . . . R262V
Y1 Viton diaphragm/valve set R262Y1
Y2 EDPM diaphragm/valve set R262Y2
5-125 psi
3-60 psi
DIMENSIONS
A
/89
R261
25
11/2
1
23/4
11/4
2
/49
R262
25
11/2
1
23/4
11/4
2
D
1
C
DIMENSIONS (INCHES)
B
C
D
MODEL NO.
MAX. FLOW
SCFM
PIPE
SIZE
1
/2
/2
WEIGHT
(0ZS.)
+
B
Regulators
▼
A
35
Miniature Water Regulators
SPECIFICATIONS
KITS
Body
● Glass filled nylon
Panel Kit
● Ring only
panel hole size 13/169 . . . . . . . PK1611
Bonnet
● Glass filled nylon
Diaphragm Kit
● Non-relieving . . . . . . . . . . . . RK260N
Seals
● Buna N elastomer standard
FEATURES
●
●
●
●
●
●
●
●
●
Micro seat finish ensuring no reduced
pressure creep
Sonic welded, leak-tight, non-relieving
diaphragm assembly
Water hammer and vibration dampner
Three position adjustment knob:
“push” to lock, “pull” to adjust and
“detach” to make tamper resistant
Excellent flow characteristics due to the
large open outlet orifice
Flexibility of design, offering all stainless
internals and three elastomer selections
Plastic (glass-filled nylon) construction
One standard gauge port full flow
Tamper-proof cap included
Spring
● 316 stainless steel
Mini Mounting Bracket see page 65
● Bracket and Ring . . . . . . . . . BR1611
Valve
● 316 stainless steel
APPLICATIONS
●
Flow
● 5 gpm
●
Supply Pressure
● 250 psig
●
Operating Pressure Range
● 5 to 125 psig
●
●
R360 series miniature water pressure
regulator meets all pending restrictions
on the use of brass in water systems.
Prevent water hammer effect.
Vending machines that require a
water mixer
Drinking fountains
Home water filtration systems
Operating Temperature Range
● 40˚F to 120˚F
Gauge Port
● (1) 1/89 standard, full flow
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
B 2-Position Mechanical
Lockout Knob . . . . . . . . . . . R362B
G Gauge (0-160 psi) . . . . . . . . R362G
I Instrument pressure . . . . . . R362I
3 to 20 psi adjustment
L Low pressure . . . . . . . . . . . R362L
3 to 60 psi adjustment
P Panel mount . . . . . . . . . . . . R362P
U No gauge port . . . . . . . . . . . R362U
V All 1/49 ports . . . . . . . . . . . . R362V
Y1 Viton diaphragm/valve set . . R362Y1
Y2 EDPM diaphragm/valve set . R362Y2
5-125 psi
3-60 psi
DIMENSIONS
A
/89
R361
5
11/2
1
23/4
11/4
3
/49
R362
5
11/2
1
23/4
11/4
3
D
1
C
+
B
36
▼
A
Regulators
DIMENSIONS (INCHES)
B
C
D
MODEL NO.
MAX. FLOW
GPM
PIPE
SIZE
1
/2
/2
WEIGHT
(OZS.)
Push-to-Connect Regulators
Operating Pressure Range
5 to 125 psig
SPECIFICATIONS
●
Body
● Glass filled nylon
Operating Temperature Range
● 40˚F to 120˚F
Bonnet
● Glass filled nylon
Gauge Ports
● (2) 1/89 Standard, full flow R240 only
Seals
● Buna N
FEATURES
●
●
●
●
●
●
●
●
●
●
Diaphragm Kit
● Relieving . . . . . . . . . . . . . . . RK260
● Non-relieving . . . . . . . . . . . . RK260N
Supply Pressure
● 250 psig
Mounting Kits see page 65
● Bracket & Ring
. . . . . . . . . .BR1611
● Ring Only . . . . . . . . . . . . . . .PK1611
Fast installation time
Eliminates inlet and outlet fittings
No pipe sealant
Quick disconnect
No tools needed
Reduces potential leak points
Micro-finish valve seat ensures no
reduced creep
Reduces potential leak points
Easily panel mounted
Tamper proof cap included
Lightweight
PERFORMANCE CHARACTERISTICS
R242 - Air
5-125 psi
3-60 psi
OPTIONS
R342 - Water
add suffix to part number in alpha order
B 2 Position Mechanical . . . . . . . R242B
Lock Knob
G Gauge (0-160 psi) . . . . . . . . . . R242G
I Instrument pressure (3-20psi) . R242G
L Low Pressure (3 - 60 psi) . . . . R242L
N Non-relieving . . . . . . . . . . . . . . R242N
P Panel mount . . . . . . . . . . . . . . R242P
Y1 Viton diaphragm/valve set . . . . R242Y1
Y2 EDPM diaphragm/valve set . . . R242Y2
5-125 psi
3-60 psi
DIMENSIONS
MODEL NO.
MAX. FLOW
SCFM
A
1
/49
R242
30
23/16
19/16
23/4
2.9
1
/4”
R342
5
23/16
19/16
23/4
2.9
PIPE
SIZE
DIMENSIONS (INCHES)
B
C
WEIGHT
(OZ.)
C
B
A
Regulators
▼
●
KITS
Spring
● 316 Stainless Steel
37
Tri●Star Regulators
SPECIFICATIONS
KITS
Body
● Black coated aluminum
Repair Kits
● Diaphragm kit relieving . . . . . DK35
● Diaphragm kit
Non-relieving . . . . . . . . . . . . DK35N
● Valve kit . . . . . . . . . . . . . . . . VK35
Bonnet
● Glass filled nylon
Mounting Kits see page 65
● Bracket kit . . . . . . . . . . . . . . RBK5
● Panel mounting kit ring only
panel hole size 13/169 . . . . . . . PKR35
● Panel mount
bracket and ring . . . . . . . . . . PMKR35
Seals
● Buna N Elastomer standard
Seat
● Brass
FEATURES
●
●
●
●
●
●
●
●
●
Supply Pressure
● 250 psig
Micro finished brass seat to ensure
no reduced pressure creep
Reinforce diaphragm for
repeated accuracy
Minimal pressure droop due to
efficient aspiration
Three position non-rising adjustment
knob; push to lock, pull to adjust,
detach to make tamper resistant
Relieving style standard
In-line or modular installation
Easily panel mounted
Tamper-proof cap included
High scfm flow due to efficient aspiration
Operating Pressure Range
● 5 to 125 psig
Operating Temperature Range
● 40˚F to 120˚
Gauge Port
● 1/49 full flow
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
G Gauge (0-160 psi) . . . . . . . . R354G
H High pressure . . . . . . . . . . . R354H
10 to 250 psi adjustment
I Instrument pressure . . . . . . . . R354I
3 to 20 psi adjustment
L Low pressure . . . . . . . . . . . R354L
3 to 60 psi adjustment
N Non-relieving . . . . . . . . . . . R354N
P Panel mount . . . . . . . . . . . . R354P
T Tee handle adjustment . . . . . R354T
DIMENSIONS
D
TEE HANDLE
T Option
Add 3/16 to C
▼
A
Regulators
/49
R352
50
2 21/32
17/32
53/8
/89
R353
80
2 21/32
17/32
/29
R354
100
2 21/32
17/32
3
1
+
B
38
MODEL NO.
MAX. FLOW
SCFM
1
C
DIMENSIONS (INCHES)
B
C
D
PIPE
SIZE
A
E
(WIDTH)
WEIGHT
(LBS.)
2 3/4
2 1/4
1.0
53/8
2 3/4
2 1/4
1.0
53/8
2 3/4
2 1/4
1.0
MidFlow Regulators
KITS
SPECIFICATIONS
Repair Kits
● Diaphragm kit relieving . . . . . DK35
● Diaphragm kit
Non-relieving . . . . . . . . . . . . DK35N
● Valve kit . . . . . . . . . . . . . . . . VK37
Body
● Black coated aluminum
Bonnet
● Glass filled nylon
Mounting Kits see page 65
● Bracket kit . . . . . . . . . . . . . . RBK7
● Panel mounting kit ring only
panel hole size 13/169 . . . . . . . PKR35
● Panel mount
bracket and ring . . . . . . . . . . PMKR35
Seals
● Buna N Elastomer standard
Seat
● Brass
FEATURES
●
●
●
●
●
●
●
●
Micro finished brass seat to ensure
no reduced pressure creep
Reinforce diaphragm for
repeated accuracy
Minimal pressure droop due to
efficient aspiration
Three position non-rising adjustment
knob; push to lock, pull to adjust,
detach to make tamper resistant
Relieving style standard
Easily panel mounted
Tamper-proof cap included
High scfm flow due to efficient aspiration
Supply Pressure
● 250 psig
Operating Pressure Range
● 5 to 125 psig
Operating Temperature Range
● 40˚F to 120˚
Gauge Port
● 1/49 full flow
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
G Gauge (0-160 psi) . . . . . . . . R373G
H High pressure . . . . . . . . . . . R373HT
10 to 250 psi adjustment - Must use
T-handle option
I Instrument pressure . . . . . . . . R373I
3 to 20 psi adjustment
L Low pressure . . . . . . . . . . . R373L
3 to 60 psi adjustment
N Non-relieving . . . . . . . . . . . R373N
P Panel mount . . . . . . . . . . . . R373P
T Tee handle adjustment . . . . . R373T
DIMENSIONS
D
MODEL NO.
MAX. FLOW
SCFM
/89
R373
170
37/16
113/32
57/8
/29
R374
215
37/16
113/32
3
/49
R376
220
37/16
19
R378
250
37/16
3
C
TEE HANDLE
T Option
Add 3/16 to C
DIMENSIONS (INCHES)
B
C
D
PIPE
SIZE
1
A
(WIDTH)
E
WEIGHT
(LBS.)
2 3/4
2 1/4
1.3
57/8
2 3/4
2 1/4
1.3
113/32
57/8
2 3/4
2 1/4
1.3
113/32
57/8
2 3/4
2 1/4
1.3
B
Regulators
▼
A
39
High Flow Regulators
SPECIFICATIONS
KITS
Body
● Black coated aluminum
Repair Kit
● Piston relieving . . . . . . . . . . . DK39
● Piston non-relieving . . . . . . . DK39N
● Valve . . . . . . . . . . . . . . . . . . VK39
● Spring (5-125 psi) . . . . . . . . SK39
● Spring (3-60 psi) . . . . . . . . . SK39L
● Spring (10-200 psi) . . . . . . . SK39H
● Spring cage . . . . . . . . . . . . . SC39
Bonnet
● Die cast aluminum, black coated
Seals
● Buna N Elastomer standard
Seat
● Brass
Supply Pressure
● 250 psig
FEATURES
●
●
●
●
●
Mounting Kits see page 65
● Bracket Kit . . . . . . . . . . . . . .RBK39
● Panel mounting kit ring only . PKR35
panel hole size 1-3/169
Micro finished brass seat to ensure
no reduced pressure creep
Relieving style piston standard
High scfm flow due to efficient aspiration
Hard epoxy corrosion protection
Available in 1”, 1-1/4”, 1-1/2” NPT sizes
OPTIONS
add suffix to part number in alpha order
G Gauge (0-160 psi) . . . . . . . . R398G
H High pressure . . . . . . . . . . . R398H
10 to 250 psi adjustment
L Low pressure . . . . . . . . . . . R398L
3 to 60 psi adjustment
P Panel mount . . . . . . . . . . . . R398P
Operating Pressure Range
● 5 to 125 psig
Operating Temperature Range
● 40˚F to 120˚F
Gauge Ports
● 1/49
PERFORMANCE CHARACTERISTICS
DIMENSIONS
D
MODEL NO.
MAX. FLOW
SCFM
A
19
R398
600
47/8
21/32
11/4”
R3910
700
47/8
11/2”
R3912
700
47/8
PIPE
SIZE
D
WEIGHT
(LBS.)
91/2
41/4
3.4
21/32
91/2
41/4
3.3
21/32
91/2
41/4
3.2
DIMENSIONS (INCHES)
B
C
C
B
40
▼
A
Regulators
Adjustable High Performance Regulators
Bleed Rates
● Continuous 5.0 scfh or .08 scfm
OPTIONS
G Gauge (0-160 psi) . . . . . . . . P14-OG
H High pressure . . . . . . . . . . . P14-04H
P14 only: 10 to 250 psi adjustment
L Low pressure . . . . . . . . . . . P14-04L
P14 Only: 3 to 60 psi adjustment
NB No bleed . . . . . . . . . . . . . . . P14-04NB
SP Std. pressure P10 only . . . . P10-04SP
KITS
Panel Mounting Kit
● Panel mount kit
9
/169 bonnet . . . . . . . . . . . . . . PMKR35
● Panel mounting ring . . . . . . . PKR35
Diaphragm Kit
● Diaphragm kit relieving
P10 . . . . . . . . . . . . . . . . . . . RKP10R
● Diaphragm kit relieving
P14-03, P14-04. . . . . . . . . . . RKP10R
● Diaphragm kit P14-02 . . . . . . RKP14
SPECIFICATIONS
FEATURES
●
●
●
●
●
●
●
Micro finished brass seat to ensure
no reduced pressure creep
Reinforce diaphragm for
repeated accuracy
Minimal pressure droop due to
efficient aspiration
Relieving style standard
In-line or modular installation
Easily panel mounted
High scfm flow due to efficient aspiration
Continuous bleed
Mounting Kits see page 65
● Mounting bracket . . . . . . . . . RBK5
● Panel mount nut . . . . . . . . . . PKR35
Applications
● Pneumatic instrumentation
● Controllers and transmitters
● Valve operators, positioners
● Cylinder loading and
braking pressure control
● Roll loading
● Air and force balance hoists
● Electric pneumatic proportional modules
● Precise torque control of
air operated tools
PERFORMANCE CHARACTERISTICS
Inverse Ratio Performance – P10
Initial
Pressure
Reduced
Pressure
Variance
-25
-20 -15 -10
-5
0 +5 +10 +15 +20 +25
+2
+1
0
0
+1
0
0
0
-1
-2
-3
Inverse Ratio Performance – P14
Reduced
Pressure
Variance
+1.5 +1.2 +1 +.6 +.4 0 -.3 -.7 -1 -1.3 -1.5
DIMENSIONS
D
MODEL NO.
/49
P10-02
30
3-25
221/32 113/32
61/4
33/4
21/4
1.1
/89
P10-03
30
3-25
221/32 113/32
61/4
33/4
21/4
1.1
/49
P14-02
40
5-125
221/32 113/32
61/4
33/4
21/4
1.1
/89
P14-03
50
5-125
221/32 113/32
61/4
33/4
21/4
1.1
/29
P14-04
70
5-125
221/32 113/32
61/4
33/4
21/4
1.1
1
C
3
1
3
B
1
MAX. FLOW
MANUAL
SCFM*
RANGE PSIG
DIMENSIONS (INCHES)
B
C
D
PIPE
SIZE
A
E
(WIDTH)
WEIGHT
(LBS.)
A
Regulators
▼
●
Body
● Black coated aluminum
Bonnet
● Glass filled nylon
Seals
● Buna N Elastomer standard
Diaphragm
● Reinforced Buna N
Valve
● Brass and Buna N Disc
Seat
● Brass
Supply Pressure
● 250 psig
Reduced Press Flow
● P10: 3 to 25 psig, P14: 5 to 125 psig
Operating Temperature Range
● 40˚F to 120˚F
Gauge Ports
● 1/49 npt
41
Miniature Integral Filter/Regulators
FEATURES
●
●
●
●
●
●
●
Micro seat finish to ensure
no reduced pressure creep
Diaphragm operation
Relieving style standard
Three position non-rising adjustment
knob; push to lock, pull to adjust,
detach to make tamper resistant
Easily panel mounted
Tamper-proof cap included
20 micron filter
OPTIONS
add suffix to part number in alpha and
numeric order
B 2-Position Mechanical
Lockout Knob . . . . . . . . . . . B742B
G Gauge (0-160 psi) . . . . . . . . B742G
I Instrument pressure . . . . . . B742I
3 to 20 psi Adjustment
J Overnight drain plastic bowl . . B742J
K Overnight drain metal bowl . . . B742K
L Low pressure . . . . . . . . . . . . B742L
3 to 60 psi adjustment
M Metal bowl . . . . . . . . . . . . . B742M
N Non-relieving . . . . . . . . . . . B742N
P Panel mount . . . . . . . . . . . . B742P
Z Piston drain . . . . . . . . . . . . B742Z
5 5 Micron element . . . . . . . . B7425
SPECIFICATIONS
KITS
Body
● Zinc, black coated
Bonnet
● Glass filled nylon
Polycarbonate Bowl
● Max. pressure 150 psig
● Operating temperature range
40˚F to 125˚F
Metal Bowl aluminum
● Max. pressure 250 psig
● Operating temperature range
40˚F to 175˚F
Piston Drain metal
Note: limits bowl temperature and
pressure rating
● Max. pressure 150 psig
● Operating temperature range
40˚F to175˚F
Body nickel plated zinc
Baffle plastic
Seals Buna N
Elements
● 20 micron sintered bronze
●
5 micron sintered bronze
Bowl Kits
● Polycarbonate bowl. . . . . . . . BKF300
● Metal bowl . . . . . . . . . . . . . . BKF300M
Element Kit
● 20 micron element 2-pack . . . EKF300
● Regulator bonnet repair . . . . RB260
Diaphragm Kit
● Relieving diaphragm . . . . . . . RK260
Mounting Kits see page 65
● Mounting bracket and ring . . . BR1611
● Mounting bracket ring only . . . PK1611
- psig
PERFORMANCE CHARACTERISTICS
Air Flow - scfm @ 100 psig
A
DIMENSIONS
D
PIPE
SIZE
DIMENSIONS (INCHES)
A
B
C
D
MODEL NO.
MAX. FLOW
SCFM
BOWL
CAPACITY
WEIGHT
(LBS.)
/89
B741
20
1 oz.
15/8
23/16
61/4
11/4
.6
/49
B742
20
1 oz.
15/8
23/16
61/4
11/4
.6
B
1
1
42
▼
C
Regulators
Tri●Star Integral Filter/Regulators
SPECIFICATIONS
WARNING! Polycarbonate plastic bowls
could rupture if exposed to incompatible
chemicals whether inside or outside the
bowl. If such chemicals are present, use a
metal bowl. Refer to page 64 for details.
Body
● Black coated aluminum
Bonnet
● Glass filled nylon
Seals
● Buna N Elastomer standard
Polycarbonate Bowl
● Max. pressure 150 psi
● Operating temperature range
40˚F to 125˚F
Metal Bowl
● Zinc, black epoxy coated
● Max. pressure 200 psi
● Operating temperature range
40˚F to 175˚F
Metal Bowl with Sight Gauge
● Max. pressure 250 psi
● Operating temperature range
40˚F to 175˚F
FEATURES
●
●
●
●
●
40 micron element
Manual drain
Relieving regulator
Zero creep, machined brass valve seat
3-position, non-rising adjustment knob
Tamper-proof cap included
OPTIONS
add suffix to part number in alpha and
numeric order
F Internal float drain . . . . . . . . B752F
G Gauge . . . . . . . . . . . . . . . . . B752G
H High pressure . . . . . . . . . . . . B752H
10 to 250 psi adjustment
I Instrument pressure . . . . . . B752I
3 to 20 psi adjustment
J Overnight drain plastic bowl B752J
K Overnight drain metal bowl . B752KM
L Low pressure . . . . . . . . . . . . B752L
3 to 60 psi adjustment
M 6 oz. metal bowl without sight . B752M
P Panel mount . . . . . . . . . . . . B752P
T Tee handle adjustment . . . . . B752T
W 6 oz. metal bowl with sight . . . B752W
-5 5 micron element . . . . . . . . B752-5
-3 3 micron element . . . . . . . . B752-3
Internal float drain. . . . . . . . . 5200
Bowl Kits
● Polycarbonate . . . . . . . . . . . . BKF35
● Metal . . . . . . . . . . . . . . . . . . BKF45M
● Metal with sight . . . . . . . . . . BKF45W
Element Kits
● 40 micron 2-pack . . . . . . . . . EK35
● 5 micron 2-pack . . . . . . . . . . EK35-5
● 3 micron absolute 2-pack . . . EK35-3
Diaphragm Kits
● Relieving . . . . . . . . . . . . . . . DK35
Mounting Kits see page 65
● Mounting bracket . . . . . . . . . RBK5
● Panel mount nut
. . . . . . . . . PKR35
DIMENSIONS
PIPE
SIZE
E
D
●
PERFORMANCE CHARACTERISTICS
A
A
KITS
B
BOWL
CAPACITY
A
DIMENSIONS (INCHES)
B
C
D
E
WEIGHT
(LBS.)
/49
B752
50
5 oz.
221/32 45/32
93/4
21/4
23/4
1.75
/89
B753
80
5 oz.
221/32 45/32
93/4
21/4
23/4
1.75
/29
B754
100
5 oz.
221/32 45/32
93/4
21/4
23/4
1.75
Regulators
1
3
C
MAX. FLOW
MODEL NO.
SCFM
▼
●
Internal Float Drain
plastic, metal, brass, Buna N seal
Note: limits bowl temperature and
pressure rating
● Operating pressure range 30 to 175 psi
● Operating temperature range
40˚F to 125˚F
1
43
LUBRICATORS
Most pneumatically operated equipment
such as valves, cylinders, and air tools,
require some form of lubrication to
reduce equipment maintenance and
prolong life.
Air driven devices can be lubricated by
using an air line lubricator, a device for
adding lubricating oil in aerosol form into
the compressed air line. The air passing
through the lubricator transports the
lubricant to air tools, cylinders or other air
driven devices where the lubricant is
deposited on moving and sliding surfaces
to reduce friction and wear.
Arrow offers four distinct types:
Miniature, Arrowfog, Ultrafog, Wick Style.
Miniature Fog-Type lubricators are
designed for low air flow applications
where space is limited.
Arrowfog in TriStar and Midflow
lubricators are the most popular units for
applications that do not require extremely
fine oil particles or long distance
lubrication. They produce oil particles of
2.5 micron. Arrowfog sends all metered
oil down line in fog droplets;
accommodates a wide range of
applications.
Arrow Ultrafog in Tri-Star and Midflow
lubricators produce extremely fine, .4
micron oil particles. Due to their size,
these molecules remain in suspension
and are carried further downstream than
the particles from an Arrowfog. Arrow
Ultrafog allows precise adjustment
control. Atomizes oil droplets to a fine
mist for reclassification in the bowl before
sending lighter particles of oil down line.
Lubricators
▼
Arrowick lubricators are economical and
reliable for lubricating tools or cylinders
that run constantly. The Arrowick
automatically maintains the same air-oil
ratio regardless of variations in air flow.
The average droplet size is 3 microns.
Arrowick uses an adjustable saturated
wick to send particles or oil down line.
44
Miniature Fog Lubricators
SPECIFICATIONS
KITS
WARNING! Polycarbonate plastic bowls
could rupture if exposed to incompatible
chemicals whether inside or outside the
bowl. If such chemicals are present, use a
metal bowl.
Bowl Kits
● Polycarbonate . . . . . . . . . . . . BK1811
● Metal . . . . . . . . . . . . . . . . . . BK1811M
● Repair kit . . . . . . . . . . . . . . . RK1812
● Dome Kit . . . . . . . . . . . . . . . AK35
Body
● Zinc, black coated
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK3
Polycarbonate Bowl
Max. pressure 150 psi
● Operating temperature range
40˚F to 125˚F
●
FEATURES
●
●
●
●
●
●
●
Metal Bowl
1 oz. polycarbonate bowl
Optional metal bowl
Visible drip rate
Easy to refill
Fine adjustment screw
Requires only .1 cfm of air flow to operate
Automatically adjusts oil mist delivery
with air flow variations
●
●
●
Black coated aluminum
Max. pressure 200 psi
Operating temperature range
40˚F to 175˚F
Recommended Oil
● SAE 10 oil or lighter
● Atomized average 2 micron
● .1 scfm to establish drip rate
OPTIONS
add suffix to part number in alpha order
M Metal bowl . . . . . . . . . . . 1812M
PERFORMANCE CHARACTERISTICS
DIMENSIONS
A
C
B
PIPE
SIZE
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
/8 9
L181
16
1 oz.
/49
L182
16
1 oz.
1
C
1
DIMENSIONS (INCHES)
A
B
C
WEIGHT
(LBS.)
11/2
2
5
.4
13/8
2
5
.4
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Lubricators
▼
A
45
Tri●Star Series 3 Arrowfog Lubricators
Metal Bowl with Sight
Zinc, black coated
● Max. pressure range 200 psig
● Operating temperature range
40˚F to 175˚F
Recommended Oil
● SAE 10 oil or lighter
● Atomized average 2 micron
OPTIONS
●
add suffix to part number in alpha order
M 6 oz. black coated
metal bowl . . . . . . . . . . . . .L354M
W 6 oz. black coated
metal bowl with sight . . . . . L354W
SPECIFICATIONS
WARNING! Polycarbonate plastic bowls could
rupture if exposed to incompatible chemicals
whether inside or outside the bowl. If such
chemicals are present, use a metal bowl.
●
●
●
●
Bowl Kits
● Polycarbonate . . . . . . . . . . . . BKL35
● Metal bowl without sight . . . . BKL45M
● Metal bowl with sight . . . . . . BKL45W
Body
● Black coated aluminum
Polycarbonate Bowl with Bowl Guard
● Max. pressure 150 psig
● Operating temperature range
40˚F to 125˚F
Metal Bowl
● Zinc, black coated
● Max. pressure 200 psig
● Operating temperature range
40˚F to 175˚F
FEATURES
●
KITS
Aluminum housing
Oil delivery at low air flow
approximately 2 scfm
Lubricator may be filled without
shutting down air line
3-position non-rIsing adjustment knob;
push to lock, pull to adjust, detach for
tamper resistant
Can be converted on-line to Ultrafog
lubricator with interchangeable module
Part # RKL452
Repair Kits
● For L350 . . . . . . . . . . . . . . . . RKL352
● Dome kit . . . . . . . . . . . . . . . . AK35
● Fill plug kit . . . . . . . . . . . . . . FK35
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK5
Applications
● Air tools
● Air motors
● Single point lubrication
PERFORMANCE CHARACTERISTICS
A
A
D
DIMENSIONS
PIPE
SIZE
B
BOWL
CAPACITY
16
5 oz.
23/4
21/8
7”
21/2
1.0
/89
L353
82
5 oz.
23/4
21/8
7”
21/2
1.0
/29
L354
142
5 oz.
23/4
21/8
7”
21/2
1.0
1
▼
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Lubricators
WEIGHT
(LBS.)
L352
3
46
DIMENSIONS (INCHES)
A
B
C
D
/49
1
C
MODEL NO.
MAX. FLOW
SCFM*
MidFlow Series 3 Arrowfog Lubricators
SPECIFICATIONS
●
●
●
Bowl Kits
● Metal bowl with sight . . . . . . BKL47W
● Metal bowl without sight . . . . BKL47M
● Metal bowl with sight . . . . . . BKL48W
● Metal bowl without sight . . . . BKL48M
Body
● Black coated aluminum
Metal Bowl
● Zinc, black coated
● Max. pressure 200 psig
● Operating temperature range
40˚F to 175˚F
Metal Bowl with Sight
● Zinc, black coated
● Max. pressure range 200 psig
● Operating temperature range
40˚F to 175˚F
Recommended Oil
● SAE 10 oil or lighter
● 3 scfm to establish drip rate
● Atomized average 2 micron droplet
FEATURES
●
KITS
Oil delivery at low air flow
approximately 2 scfm
Lubricator may be filled without
shutting down air line
3-position non-rising adjustment knob;
push to lock, pull to adjust, detach for
tamper resistant
Can be converted on-line to Ultrafog
lubricator with interchangeable module
Part # RKL452
Repair Kits
● For L370 . . . . . . . . . . . . . . . . RKL372
● For L380 . . . . . . . . . . . . . . . . RKL382
● Dome kit . . . . . . . . . . . . . . . . AK35
● Fill plug kit . . . . . . . . . . . . . . FK37
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
M 6 oz. black coated
metal bowl . . . . . . . . . . . . . L373M
A
D
DIMENSIONS
B
PIPE
SIZE
DIMENSIONS (INCHES)
A
B
C
D
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
/89
L373W
82
10 oz.
33/4
25/16
813/32
3
2.4
/89
L383W
82
20 oz.
33/4
25/16
1119/32
3
3.3
/29
L374W
142
10 oz.
33/4
25/16
813/32
3
2.4
/29
L384W
142
20 oz.
33/4
25/16
1119/32
3
3.3
/49
L376W
142
10 oz.
33/4
25/16
813/32
3
2.4
/49
L386W
142
20 oz.
33/4
25/16
1119/32
3
3.3
Lubricators
▼
A
3
3
WEIGHT
(LBS.)
C
1
1
3
3
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
47
Tri●Star Series 4 Ultrafog Lubricators
OPTIONS
Metal Bowl with Sight
● Zinc, black coated
● Max. pressure range 200 psig
● Operating temperature range
40˚F to 175˚F
add suffix to part number in alpha order
M 6 oz. black coated
metal bowl . . . . . . . . . . . . . L454M
W 6 oz. black coated
metal bowl with sight . . . . . L454W
Recommended Oil
● SAE 10 oil or lighter
● 2 scfm to establish drip rate
● Atomized average .6 micron
● 1 out of 28 drops travel downstream
● Cannot be filled under pressure
SPECIFICATIONS
WARNING! Polycarbonate plastic bowls
could rupture if exposed to incompatible
chemicals whether inside or outside the
bowl. If such chemicals are present, use a
metal bowl.
Body
● Black coated aluminum
Polycarbonate Bowl with Bowl Guard
● Max. pressure 150 psig
● Operating temperature range
40˚F to 125˚F
Metal Bowl
● Zinc, black coated
● Max. pressure 200 psig
● Operating temperature range
40˚F to 175˚F
FEATURES
●
●
●
●
●
●
5 oz. polycarbonate bowl w/steel
bowl guard
Aluminum housing, black coated
Oil delivery at low air flow
approximately 2 scfm
3-position non-rising adjustment knob;
push to lock, pull to adjust, detach for
tamper resistant
Convert on-line to Arrowfog with
interchangeable module #RKL352
In line modular installation
KITS
Bowl Kits
● Metal . . . . . . . . . . . . . . . . . . BKL45M
● Metal with sight . . . . . . . . . . BKL45W
Repair Kits
● Adjustment dome kit . . . . . . . AK35
● Fill plug . . . . . . . . . . . . . . . . FK35
● For Ultrafog . . . . . . . . . . . . . RKL452
● Sight kit . . . . . . . . . . . . . . . . WK45
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK5
Applications
● Multiple lubrication points
PERFORMANCE CHARACTERISTICS
A
DIMENSIONS
A
PIPE
SIZE
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
B
D
L452
16
5 oz.
23/4
21/8
7”
21/2
1.0
/89
L453
82
5 oz.
23/4
21/8
7”
21/2
1.0
/29
L454
142
5 oz.
23/4
21/8
7”
21/2
1.0
3
1
▼
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
48
Lubricators
WEIGHT
(LBS.)
/49
1
C
DIMENSIONS (INCHES)
A
B
C
D
MidFlow Series 4 Ultrafog Lubricators
FEATURES
●
●
●
●
Aluminum housing
Oil delivery at low air flow
approximately 2 scfm
3-position non-rising adjustment knob;
push to lock, pull to adjust, detach for
tamper resistant
Convert on-line to Arrowfog with
interchangeable module #RKL352
SPECIFICATIONS
KITS
Body
● Black coated aluminum
Metal Bowl
● Zinc, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 125˚F
Metal Bowl with Sight
● Zinc, black coated
● Max. pressure range 200 psig
● Operating temperature range
40˚F to 175˚F
Recommended Oil
● SAE 10 oil or lighter
● 2 scfm to establish drip rate
● Atomized average .6 micron
● 1 out of 28 drops travel downstream
● Cannot be filled under pressure
Bowl Kits
● Metal bowl without sight . . . . BKL47M
● Metal bowl with sight . . . . . . BKL47W
Repair Kits
● For L350 . . . . . . . . . . . . . . . . RKL470
● Dome kit . . . . . . . . . . . . . . . . AK37
● Fill plug kit . . . . . . . . . . . . . . FK47
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . FBK7
OPTIONS
PERFORMANCE CHARACTERISTICS
add suffix to part number in alpha order
M 6 oz. black coated
metal bowl . . . . . . . . . . . . . L472M
A
D
DIMENSIONS
B
PIPE
SIZE
DIMENSIONS (INCHES)
A
B
C
D
MODEL NO.
MAX. FLOW
SCFM*
BOWL
CAPACITY
/89
L473W
82
10 oz.
33/4
25/16
813/32
3
2.4
/89
L483W
82
20 oz.
33/4
25/16
1119/32
3
3.3
/29
L474W
142
10 oz.
33/4
25/16
813/32
3
2.4
/29
L484W
142
20 oz.
33/4
25/16
1119/32
3
3.3
/49
L476W
142
10 oz.
33/4
25/16
813/32
3
2.4
/49
L486W
142
20 oz.
33/4
25/16
1119/32
3
3.3
Lubricators
▼
A
3
3
WEIGHT
(LBS.)
C
1
1
3
3
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
49
Arrowick Lubricators
SPECIFICATIONS
KITS
Body
● Black coated aluminum
Bowl Kits
● 29 oz. metal . . . . . . . . . . . . . BK4106M
● 29 oz. metal with sight . . . . . BK4106W
● 2 qt. metal with sight . . . . . . BK4106LCM
Metal Bowl
● Steel, black coated
● Max. pressure 250 psig
● Operating temperature range
40˚F to 200˚F
Repair Kits
● For 4106, 4106LCM, 4108,
and 4108LCM . . . . . . . . . . . . RK4106
● For 4112 and 4112LCM . . . . RK4112
● Sight kit . . . . . . . . . . . . . . . . WK35
Recommended Oil
● SAE 10 oil or lighter
● 30 scfm to establish drip rate
FEATURES
●
●
●
●
●
●
●
●
Simple, trouble free design. It cannot be
over-filled, and has greater bowl capacity
which extends interval between filling
Can be used downstream of 4 way valves
because it accommodates reverse flow
Bowl fills all the way to the top
It can be filled under pressure no need to
shut down air
Tamper-proof internal adjustment
Porous bronze oil metering diffuser
introduces smallest possible oil particles
to the air
No small orifices to clog and
stop oil delivery
Automatically maintains air-oil ratio
regardless of variations in air flow
Droplet Size
● 3 micron or less
Applications
● Single point
● Flow can be reversed
Minimum Air Flow
for Lubrication
Model No.
4106
4106LCM
4108
4108LCM
4112
4112LCM
Air Flow SCFM
30 SCFM
30 SCFM
30 SCFM
30 SCFM
50 SCFM
50 SCFM
PERFORMANCE CHARACTERISTICS
OPTIONS
add suffix to part number in alpha order
W metal bowl w/sight glass . . 4108W
DIMENSIONS
PIPE
SIZE
A
B
▼
Lubricators
DIMENSIONS (INCHES)
A
B
C
WEIGHT
(LBS.)
4106
175
29 oz.
47/8
11/8
87/8
3.5
19
4108
175
29 oz.
47/8
11/8
87/8
3.5
11/29
4112
175
29 oz.
51/4
11/4
9
3.5
/49
4106LCM
175
60 oz.
47/8
11/8
131/2
6.0
19
4108LCM
175
60 oz.
47/8
11/8
131/2
6.0
11/29
4112LCM
175
60 oz..
51/4
11/4
131/2
6.0
3
50
BOWL
CAPACITY
/49
3
C
MODEL NO.
MAX. FLOW
SCFM*
* Flow scfm based on 5.0 psi ▲ p @ 100 psig inlet.
Miniature Filter/Regulator/Lubricator Combinations
Miniature
PIPE
SIZE
COMBINATION NUMBER
/89
7681
1
/49
1
7682
COMPONENTS
FILTER
REGULATOR
DROP LUBE
F300-01
R161G
L181
F300-02
R162G
C
APPROX.
WEIGHT
(LBS.)
APPROX. DIMENSIONS
BOWL CAPACITY
(OUNCES)
B
A
1
51/49
29
61/29
1.3
L182
1
5 /49
29
61/29
1.3
L181
1
31/49
23/169
61/49
1.1
1
3 /49
2 /169
6 /49
1.1
1
FILTER/REGULATOR
/89
1
/49
1
7622
B741G
B742G
L182
1
3
1
Combinations with Regulators include gauge.
Combinations are boxed assembled.
A
A
B
B
C
C
Filter/Regulator/Lubricator Combinations
▼
NOTE:
7621
51
Tri●Star Modular Filter/Regulator/Lubricator Combinations
High Performance • Flexibility • Compact • Lightweight
●
●
●
●
●
A screwdriver is the only tool needed to connect or
disconnect units
Insert interlocking feature allows simple installation
in any location
Installation or removal from one plane –
without disturbing existing piping
Regulator mounting can be either up or down
Unique design allows side, top, individual and
custom mounting
52
▼
,,,,,
,,,,,
Filter/Regulator/Lubricator Combinations
●
●
●
●
●
Regulator and lubricator adjustments are made thru three
position – tamper resistant adjusting knobs.
Engineered to permit use with standard size pipe nipples
Available in 1/4˝, 3/8˝ and 1/2˝ pipe sizes and insert pipe sizes
1
/4˝, 3/8˝, 1/2˝ and 3/4˝
Special optional diverter blocks supply air to secondary
locations
Unlimited adaptation to air preparation systems
Tri●Star Filter/Regulator/Lubricator Combinations
PIPE
SIZE
C
D
VC
N
STYLE
DROP LUBE
BOWL
CAPACITY
(OUNCES)
APPROX.
WEIGHT
(LBS.)
COMPONENTS
COMBINATION
NUMBER*
FILTER
REGULATOR
/49
Tri•Star*
33352
F352
R352G
L352
5
3.3
/49
(please reference chart
below for further Tri•Star
information)
33452
F352
R352G
L452
5
3.3
33353
F353
R353G
L353
5
3.3
/89
33453
F353
R353G
L453
5
3.3
/29
33354
F354
R354G
L354
5
3.4
/29
33454
F354
R354G
L454
5
3.4
/49
33356
F354
R354G
L454
5
3.4
1
1
/89
3
3
1
1
3
FILTER/REGULATOR
/49
70352
B752G
L352
5
3.0
/89
70353
B753G
L353
5
3.0
/29
70354
B754G
L354
5
4.1
1
3
1
Combinations with Regulators include gauge.
Combinations are boxed assembled.
STYLE
COMBINATION NUMBER
FILTER STYLE
REGULATOR STYLE
LUBRICATOR STYLE
C – With End Port Inserts
0 – No Filter
0 – No Regulator
0 – No Lubricator
D – Without End Port
Inserts
3 – Particulate
3 – Standard Relieving
3 – Arrowfog
VC – With OSHA Lockout
N – Nipple
4 – .09 Micron
Oil Removing
5 – .03 Oilescer
4 – Ultrafog
SERIES
5 – 5 oz. Plastic Bowl or
6 oz. Metal Bowl
PIPE SIZE
2 – 1/49
3 – 3/89
4 – 1/29
6 – 3/49
6 – Vapor Removal
7 – Filter/Regulator
Filter/Regulator/Lubricator Combinations
▼
NOTE:
53
Tri●Star Filter/Regulator/Lubricator Combinations
▲
▲
VC3 Unit
VC7 Unit
8˝
111/8˝
13/8˝
13/8˝
7 1/2˝
▲
▲
C3 Unit
93/4˝
C7 Unit
71/8˝
101/4˝
/4˝
3
/4˝
3
7 1/2˝
93/4˝
▲
▲
D3 Unit
D7 Unit
53/4˝
8 7/8˝
3
/4˝
3
/4˝
7 1/2˝
93/4˝
▲
▲
N3 Unit
N7 Unit
5 3/4˝
8 7/8˝
3
/4˝
3
7 1/2˝
/4˝
54
▼
93/4˝
Filter/Regulator/Lubricator Combinations
Tri•Star Inserts & Accessories
▲
The Tri•Star Outboard
Diverter block attaches to
the outlet port of any
Tri•Star unit and allows air
to be diverted to up to 31/49
outlets. Includes locking
plate and “O” rings, and it
will accept the Tri•Star
mounting bracket.
Description
/49 NPT Outboard Diverter Kit
Tri•Star Connector Insert
Tri•Star insert slides are
designed to guide the
insert to an interlocking
position on the unit body.
The design of the slide
also provides a unique
safety feature, should the
insert plates be removed
while the air line is under
pressure, the interlocking
slide will prevent
blowing away.
1
Arrow’s 3-way OSHA lockout valve exhausts
all downstream pressure when closed and
can be locked in
the closed position
with customer supplied pad lock.
These valves will
handle all Tri•Star
system air flows
and will exhaust 6
scfm @ 100 psi.
Model No.
V252
V253
V254
▲
▲
OSHA Lockout, 3-Way Valve
Model No.
IK50
Description
/49 OSHA Lockout Valve
3
/89 OSHA Lockout Valve
1
/29 OSHA Lockout Valve
▲
▲
IBK5 wall mounting
bracket for Modular
Tri•Star FRL units
permit bracket
mounting from inlet
and outlet ports, slide
valve and diverter
blocks
IK52
IK53
IK54
IK56
Tri•Star Pipe Port Insert
Any of four separate Tri•Star
ports permit instant pipe sizing
of every Tri•Star filter, regulator
and lubricator. Available in 1/49,
3 9 1 9
/8 , /2 , and 3/49 pipe sizes for
inlets and outlet ports. Zinc
diecase metal. A special Tri•Star
locking design prevents backing
out of lock plate screws and
keeps the screws in place when
the plate is removed.
Model No.
IK05
IK52
IK53
IK54
IK56
1
Mounting Bracket
Description
Tri•Star Connector Insert
Description
“O” Rings for Modulars
1
/49 NPT Pipe Port Insert
3
/89 NPT Pipe Port Insert
1
/29 NPT Pipe Port Insert
3
/49 NPT Pipe Port Insert
Tri•Star Diverter
The unique Tri•Star
diverter permits a portion
of filtered air to be
branched before entering
the regulator and sends it
to another location; or
when installed after the
regulator, it will divert a
portion of regulated air.
The diverter is also used
when pressure drop
readings are required.
Model No.
DK52
DK53
Description
/49 NPT Inboard Diverter Kit
/89 NPT Inboard Diverter Kit
1
3
Filter/Regulator/Lubricator Combinations
▼
▲
Tri•Star Outboard Diverter
Model No.
DK54
Modular Components & Accessories
55
MidFlow & High Flow Filter/Regulator/Lubricator Combinations
MidFlow
FILTER
REGULATOR
DROP LUBE
BOWL CAPACITY
(OUNCES)
B
C
APPROX.
WEIGHT
(LBS.)
/89
N33373W
F373W
R373
L373W
10
125/8
21/4
81/2
91/2
/89
N33383W
F383W
R373
L383W
20
125/8
21/4
111/2
101/4
/29
N33374W
F374W
R374
L374W
10
125/8
21/4
81/2
91/2
/29
N33384W
F384W
R374
L384W
20
125/8
21/4
111/2
101/4
/49
N33376W
F376W
R376
L376W
10
125/8
21/4
81/2
91/2
/49
N33386W
F386W
R376
L386W
20
125/8
21/4
111/2
101/4
PIPE
SIZE
3
Mid Flow
High Flow
3
1
1
3
3
COMBINATION
NUMBER
COMPONENTS
APPROX. DIMENSIONS
A
COMBINATION NUMBERING SYSTEM FOR MIDFLOW
STYLE
FILTER STYLE
N – Nipple
0 – No Filter
3 – Particulate
REGULATOR STYLE
0 – No Regulator
3 – Standard Relieving
4 – .09 Micron
Oil Removing
LUBRICATOR STYLE
0 – No Lubricator
3 – Arrowfog
SERIES
Bowl Type
PIPE SIZE
7 – 10 oz. Metal Bowl
3 – 3/89
W-Metal bowl w/sight
8 – 20 oz. Metal Bowl
4 – /29
M-Metal Bowl w/o sight
1
6 – 3/49
4 – Ultrafog
5 – .03 Oilescer
6 – Vapor Removal
Hi g h F lo w
PIPE
SIZE
COMBINATION
NUMBER
FILTER
REGULATOR
DROP LUBE
BOWL CAPACITY
(OUNCES)
OPTIONAL
MOUNTING
BRACKET
A
B
C
APPROX.
WEIGHT
(LBS.)
19
3548M
F329
R378T
4108
29
ACA-7 (Req. 2)
157/89
13/169
7 1/89
11.8
COMPONENTS
APPROX. DIMENSIONS
A
A
B
B
C
C
56
▼
Midflow
Filter/Regulator/Lubricator Combinations
Highflow
The compressed air flow path through
the dryer assures desiccant packing and
maximum utilization of the desiccant’s
adsorption qualities. The compressed air
enters the dryer (1) and is dispersed
through a 70 micron polypropylene
element (2) for the removal of particles.
The air is then distributed uniformly
through the full desiccant bed (3) to the
bottom of the intake tube (4). The intake
tube is protected by a 40 micron porous
bronze element (5). As the desiccant
adsorbs moisture, a dramatic and highly
visible color change from dark blue to
light pink is evident. The color change
works its way through the desiccant as
the adsorbative qualities of the desiccant
are diminished. Once the color change is
visible through the exclusive sight dome
(6), the full desiccant bed has reached its
maximum drying capacity and must be
either changed or regenerated. Dry air
exits through the inside diameter of the
intake tube (7) and out the outlet port of
the unit (8).
IN-LINE DESICCANT DRYER
ADSORPTION
Adsorption means the attraction of a
substance – the adsorbate – to, and its
subsequent accumulation on, the surface
of a solid material – the adsorbant –
which is caused by physical forces of
attraction. Adsorbants are substances
which are permeated by a large number of
very fine pores which give rise to a large
internal surface area. This, in turn,
determines the adsorption capacity of the
adsorbant, since a large internal surface
can accommodate more adsorbate.
Other factors which influence the amount
of adsorbate are: temperature, relative
humidity and pressure.
REGENERATION PROCESS
Regeneration is accomplished by heating
the desiccant to a temperature of 275°F
in a drying oven. Regeneration is
complete when the desiccant returns
to its blue color.
In-Line Desiccant Dryer
▼
For extended life and protection of the
desiccant and equipment being serviced,
an F3 Prefilter and F5 Coalescing filter
should be used as a prefiltering system
ahead of the dryer.
57
In-Line Desiccant Dryer
SPECIFICATIONS
FEATURES
●
●
D05-03
●
●
●
●
●
●
●
Bowl
● D05-03: Metal with sight gauge
● D10 & D 25: Metal with sight gauge
● D10-04XL: Metal with sight gauge
Available in capacities from .5 to 50 scfm
Compact sizes are ideal for portable or
original equipment
Drying efficiency can be tailored to
your needs down to -30°F pressure
dew point
Highly visible color change from blue
to pink through exclusive sight-glass
highlights the need for service
Exclusive hard spherical bead resists
attrition and dusting and can be recharged
Exclusive intake flow design takes air
through entire supply of desiccant for
maximum drying capacity
Built-in particulate after-filter prevents
downstream dust
Needs no electrical connection
No “purge air” lost as with
regenerative dryers
Desiccant
● Silica gel
Maximum Pressure
● 250 psig
Operating Temperature Range
● 0˚F to 120˚F
APPLICATIONS
●
●
●
●
●
D10-04
●
●
Always install an F5 coalescing filter
upstream of the D05, D10 & D25
For compressed air service only
Not to be used on life support systems
or breathing air systems
Dry air for parts blowoff
Paint spray systems
Air gauging equipment
Laboratory air
KITS
Replacement Desiccant
No. 34189 – 6 pack of 1 qt. jars
No. 34417 – 4-1 gallon jugs
Check the exhaust element to avoid high
pressure drop due to desiccant dust
entrapment. We recommend replacement
of the exhaust element.
D05, D10 & D10XL Use:
Element Kit EKD10 (1-pack each)
D25 Use: Element Kit EKD25 (1-pack each)
D25-06
A
B
B
B
DIMENSIONS
A
A
PIPE
SIZE
MODEL
NO.
MAX. FLOW
SCFM*
SCF*
/89
D05-03
.5 to 5
830
/29
D10-04
5 to 15
/29
D10-04XL
15 to 25
/49
D25-06
25 to 50 12500
3
C
C
C
C
1
1
3
D05-03
D25-06
58
▼
D10-04
D10-04XL
In-Line Desiccant Dryer
DESICCANT DESICCANT
WEIGHT
CHARGE
(LBS.)
5
/8
DIMENSIONS (INCHES) WEIGHT
(LBS.)
A
B
C
10 oz.
33/4
11/8
81/4
2.7
2500
1
1 /4
1 Qt.
7
4 /8
1
1 /8
7
8 /8
5
5000
21/2
2 Qt.
47/8
11/8
131/2
7
6
1 Gal.
6 /4
* SCFM and SCF based on 70°F inlet temp. @ 100 psig
3
2
3
17 /4
23
StageAir Drying System
HOW IT WORKS
OPTIONS
FIRST AND SECOND STAGE
●
●
●
The StageAir Drying System is a point-of-use
drying system and is protected by an OSHA
Lockout valve which exhausts all downstream
pressure when closed, and can be locked in
the closed position with customer supplied
padlock, exhaust 6 SCFM at 100 PSIG to
prevent element damage.
KITS
Internal Float Drain . . . . . . . .5200
Element Kits
● 5 micron . . . . . . . . . . . . . . . .EK35-5
● .01 micron . . . . . . . . . . . . . .EK55A
●
THIRD STAGE COALESCING FILTER
●
Note: When pressurizing, open slide valve
slowly to prevent element burst.
During Stage 3, fine filtration takes place. Here,
99.99 percent of oil aerosols and microscopic
particles down to .01 micron absolute are
removed from the air. The pop-up indicator
alerts customer that an element change is
necessary.
Desiccant Kit
● 6-Pk. of 1 Qt. Jars . . . . . . . . .34189
● 4 - 1 Gal. Jugs . . . . . . . . . . .34417
Mounting Kit see page 65
● Mounting kit . . . . . . . . . . . . . ABK10
FOURTH STAGE DESICCANT AIR DRYER
●
●
●
As the air enters the desiccant dryer, it is
dispersed through a 70 micron element. The
element distributes air evenly through the
desiccant bed. The desiccant absorbs the water
vapor from the air, producing a –40°F pressure
dew point.
To remove traces of desiccant dust before the
air leaves the system, the air passes through a
40 micron filter element. The air is now clean
and dry, and has been properly treated for use
with your air operated system.
Applications
● Paint Spray
● Air Gauging Equipment
● Lab Air
The clear indicator sight glass shows a color
change in the desiccant from blue to pink
which indicates a desiccant recharge.
DIMENSIONS
A
PIPE
SIZE
B
MODEL
NO.
MAX. FLOW
SCFM* SCF*
DESICCANT
WEIGHT
(LBS.)
DIMENSIONS (INCHES)
A
B
C
WEIGHT
(LBS.)
/29
VC7510
5 to 15
2,500
11/4
141/4
4
111/4
10
/29
VC7510XL
15 to 25
5,000
21/2
141/4
4
161/4
13.5
/49
VC7525
25 to 50 12,500
6
161/2
4
201/8
24.25
1
1
C
3
* SCFM and SCF based on 70°F inlet temp. @ 100 psig
In-Line Desiccant Dryer
▼
●
To order options for the VC7500 series,
simply add the appropriate suffix, as listed
below, to the part number in the alphabetical/numerical order.
3 3 micron absolute element
(particulate filter)
F Float drain
J Overnight Drain
The StageAir desiccant air drying system
begins with the dual stage integral
filter/regulator
First, the air enters the particulate filter, which
has a 5 micron cleanable sintered bronze
element. In this stage, corrosive moisture, pipe
scale, dirt and rust are removed from the air
line protecting the precision parts in the
regulator.
Next, the air enters a high-performance
regulator, which reduces primary
pressure to a desired pressure setting.
59
ACCESSORIES
▲
Economatic Drains
Arrow developed the heavy duty
ECONOMATIC drain valve to be a low
cost answer to leaking, clogging,
noise and other problems caused by
float-type drains.
SPECIFICATIONS
Adjustable Cycle Time
● 1-60 minutes
Adjustable Drain Time
1-30 seconds
●
A solenoid controlled by a solid state
timer opens and closes the ECONOMATIC
drain valve in 1 to 60 minute cycle times
and 1 to 30 second blow down times.
Both times are individually adjusted.
Maximum Working Pressure
200 psig
●
Maximum Fluid Temperature
+165˚F
● NEMA one enclosure
● Voltage: 115V / 1 ph / 60Hz
● 0.25 amps
● Buna-N seals
● 6´ heavy duty grounded power plug
●
The drain is designed with a manual
override switch with indicator light.
ECONOMATIC drains also feature a spring
loaded softseat solenoid which eliminates
valve noise and assures leak-proof
shutoff.
Purge Rate
● 16 scfm open flow @ 100 psig
Installation of the drain is simple and
quick – thread on and plug in.
Mounting Kit see page 65
Mounting kit . . . . . . . . . . . . . BR5702
●
DIMENSIONS
Model No.
Connection
NPT
/49
/29
5702S
1
5704S
1
Dimensions (inches)
A
B
C
3 /49
41/169
1
3 /169
315/169
4 /169
43/169
15
3
Weight
1.365
1.745
▲
Y Strainer – furnished with each Economatic Drain
A Y Strainer installed ahead of an external
drain, traps large debris and sludge;
prevents malfunctions and extends the
life of automatic drains.
FEATURES
● Cast brass manufactured in the U.S.
●
300 psi maximum working pressure
●
50 mesh stainless steel screen can be
cleaned or replaced without removal of
strainer from the line
●
3
/89 removable plug for quick draining
DIMENSIONS
60
▼
Model No.
Accessories
Connection
NPT
/49
S202
1
S204
1
/29
Dimensions (inches)
A
B
C
/329
11
/169
15
2 /649
25/89
27
2 /169
211/169
11
Weight
10.5 oz.
12 oz.
Accessories
▲
T53 Automatic Drain
A
A
B
D
C
APPLICATIONS
● Drop Leg Drain
● External Filter Drain
Internal Float Drain - 5200
Automatically drains collected liquids when internal float indicates
accumulation. Saves air loss. For standard size filter.
DIMENSIONS
Model No.
T53-02
T53-04
Connection
FPT
/49
1 9
/2
1
Dimensions (INCHES)
A
B
C
D
Weight
(lbs.)
23/4
31/4
61/2
21/4
1.0
2 /4
1
1
1
1.0
3
3 /4
6 /2
2 /4
Overnight Bowl Drains
Arrow’s Automatic Overnight drain operates when a compressed air system
is shut down. It clears accumulated condensate from a filter bowl when
pressure falls to 3 psig or less. Available for either plastic or metal bowls.
Model J - For plastic bowls - push to manually drain
Model K - For metal bowls - twist to manually drain
Kit Ordering #
32008
CKFK
Accessories
▼
The T53 series float type drain is provided
with a top threaded port. This drain features a protective stainless steel screen
with an umbrella baffle, providing a large
sump area for oil sludge and dirt. It is
used to give continued performance and
low maintenance to drain accumulated
water and oil from drain lines, receiver
tanks, condensate drop legs and filters.
61
Accessories
▲
▲
Slide Valve
Arrow’s new slide valve is a 3 way OSHA lockout valve which
exhausts all downstream pressure when closed, and can be
locked in the closed position with customer supplied padlock.
3-Way Slide Valves (Open or close and exhaust) Meet
O.S.H.A. Lockout Standard 29CFR 1910.147 - The 3-way slide
valve is for use in the main line, upstream of equipment. When
closed, it shuts off the upstream air and exhausts the downstream air.
Body is black coated zinc. Slide is 5% Teflon, high-impact,
safety yellow plastic. Seals are pre-lubricated Buna O-rings.
Screws are black coated steel.
Maximum operating pressure: 250 PSIG
Maximum operating flow: 140 SCFM
Operating temperatures: 35°F to 150°F
Exhaust bleed at 100 PSI: 7 SCFM
Mini In-Line Desiccant Dryer (-30°F Dew Point)
Used at the point-of-use, this patented, disposable, mini in-line
desiccant dryer removes all traces of water vapor, oil vapor and
dirt. It is often used directly upstream of blow guns or spray
guns as final protection for critical parts blow off and paint
spraying. Install in either direction; it functions in both
directions. A 40 micron, porous bronze element removes fine
dirt particles, an oil removing media removes oil vapor, and
desiccant beads adsorb water vapor. The see-through housing
shows desiccant color change, which indicates that the dryer
needs to be replaced.
SPECIFICATIONS
Housing
● Polycarbonate material allows clear desiccant visibility
Guard
● Nylon guard
Maximum Flow Capacity: 15 scfm
Maximum Pressure: 125 psi
Maximum Temperature: 130˚ F
APPLICATIONS
● Parts blow off
● Paint guns
B
Valve Type
62
▼
3 Way
OSHA Lockout Valve
Customer to Supply Lock
Accessories
Standard Line
With Threaded Ports
Model
Port Size
V202
V203
V204
/49
/89
1
/29
A
1
DIMENSIONS
3
Connection
NPT/FPT
Model
No.
1/4”
DFD-10
Dimensions (Inches)
A
B
3
3 /4”
1 11/16”
Weight
2.8 oz.
Accessories
Miniature Relief Valves
E291, E292
Miniature, diaphragm operated relief valves with exceptional sensitivity. Ideally suited for applications
requiring gradual proportional relief. 3 position knob pushes to lock and can be removed for tamper
resistance.
11/4”
Ordering Information
Pipe
Size
1
/8”
1
/4”
1
/8”
1
/4”
21/4”
11/2”
Model
No.
E291
E292
E191
E192
Options
B - 2-Position Mechanical Lockout Knob
G - Gauge (0-160 psi)
I - Instrumentation pressure, 1 - 15 psig
Maximum Temperature Range
● 40°F to 120°F
L - low pressure 0 - 50 psig
P - panel mount nut
U - No Gauge Ports
V - All 1/4” Ports (4)
Air Relief Capacity - SCFM
11/4”
Instrumentation
Spring Range
1 to 15
5.0
10.0
.1
.3
.3
.7
.5
2.3
21/4”
Range (psig)
Set Pressure (psig)
Rated Flow @ 10%*
Rated Flow @ 20%*
Rated Flow @ 30%
Low Pressure
Spring Range
15 to 30
20.0
40.0
.5
4.0
2.8
15.0
6.8
25.0
Standard Pressure
Spring Range
50 to 125
60.0
80.0
.2
5.5
6.5
14.0
15.0
23.0
Reseat @ 51% of Set Pressure
1) Rated flows in SCFM are taken at percentage of pressure over set pressure.
2) The relief valve will not function as a pressure regulator - excess pressure must be vented to
atmosphere.
PRESSURE SWITCH
The PDA4 pressure switch can be installed anywhere in a pneumatic or hydraulic system. It is often used
to protect air compressors and pneumatically operated equipment from damage caused by
over-pressurization. The unit can be set in a normally open or closed position in an adjustable actuation
range from 25 PSIG to 95 PSIG with 5 2% repeatability. The pressure switch has standard 18” wire
leads of 300 V, 22 SWG. For simple installation, thread the unit into the gauge port of a regulator or pipe
tee.
Construction: Zinc die cast and plastic housing, and NEMA 13 electrical enclosure which is U.L. approved.
Max. operating pressure: 300 PSI
Operating temperatures: 35°F to 180°F
Part
No.
PDA4
NPT Overall
Length
1
/4”
15/8”
Dia.
Wt.
Lbs.
Voltage
11/8”
.25
125/150/VAC
Inductive Resistive
5 AMP
7 AMP
Standard Electrical Circuit
Wire Color
Black
Green
Red
Circuit
Common
Normally Closed
Normally Open
Note: 20% differential for reset, and 1% repeatability when operated within recommended conditions.
Accessories
▼
E191, E192
11/2”
Die cast black coated body, brass seat.
Buna N Diaphragm
Specifications
● E291, E191 all 1/8” ports
● E292, E192 1/4” ports
● With 1/8” gauge ports
Maximum Pressure Range
● 150 PSI
11/2”
11/2”
Description
All Plastic non-corrosive parts.
63
Pressure Gauges & Accessories
▲
FUNCTION
Allows exact determination of pressure
drop across element. Divided into three
sections, each marked for easy understanding. The differential pressure gauge
is the best tool available for determining
element maintenance requirements.
Delta ‘P’ Gauge
Reed Switch Specifications
Max. Voltage Max Switch
Switching
Current
100 AC/DC
.30 AMPS
Max. Carrying
Current
Contact
Rating
1 AMP
10 VA
Color
Indicates
Green
Clean
Pressure Drop
0-6 psi
Yellow
Change
6-9 psi
Red
Dirty
9-12 psi
GAUGE MODELS
● DP10-A* - Replacement unit only
Basic model with 3/8-24 slotted bolts
● DP10-AE*
Basic model with 3/8-24 slotted bolts and
Reed Switch
● DP10-B
Gauge with Remote Mounting Block
● DP10-BE
Gauge with Remote Mounting Block
and Reed Switch
KITS AND ACCESSORIES
● MK-10
Mounting Kit for vertical or wall mounting
● TK-10
1 9
/4 Tubing Kit with Connector Fittings
Maximum Pressure:
● 300 psig / 20 bar
Maximum Temperature:
● 200˚ F / 93˚ C
Weight:
● .33 Lb. / 1.5 Kg
Bolt Threads:
● 3/8 -24 Inches
Bolt Material:
● Glass filled Nylon
* Model No. DP10-A & DP10-AE to mount directly on existing filter head for
replacement only.
** Model No. DP10-B & DP10-BE remote model with slotted bolts & mounting
block.
Note: To order pre-mounted units, adds suffix “D” to filter #.
▲
Pressure Gauges
PART
NO.
1481C
1481A
1481
1481B
1681C
1681A
1681
29 face,
29 face,
29 face,
29 face,
DESCRIPTION
1 9
/4 center back mount
1 9
/4 center back mount
1 9
/4 center back mount
1 9
/4 center back mount
11/29 face, 1/89 center back mount
11/29 face, 1/89 center back mount
11/29 face, 1/89 center back mount
PRESSURE
RANGE
0-30
0-60
0-160
0-300
psi
psi
psi
psi
0-30 psi
0-60 psi
0-160 psi
USED ON
Tri•Star
Tri•Star II
High Flow
Mini
Regulators
and
Mini Integral
▲
Regulator Accessories
Arrow regulators may be panel mounted to improve machine design
and overall appearance, they are convenient for control panel or
console mounting.
Suffix Q Tri-Star & Midflow
Suffix P Tri-Star & Midflow
Suffix P
(1500 Series Regulators)
Panel Mounting Regulators
64
▼
,,
,,
,,
,,
Accessories
,,,
,,,
,,,
,,,
Regulator
Suffix
Model
for Panel Mt.
Tri-Star, Midflow & Precision Series
P
Tri-Star, Midflow & Precision Series
Q
1588
P
Panel
Hole Size
113/16”
9/16”
3/4”
Dimensions & Max.
A
B
C
1/2”
11/4” 222/32”
31/2” 223/32” 5/16”
1/4”
5”
43/4”
Brackets
▲
▲
Miniature Mounting Brackets
BR1611 Bracket & Ring
PK1611 Ring Only
1.72
Use with Model #
5702S
ÀÀÀÀÀÀÀ
€€€€€€€
@@@@@@@
,,,,,,,
ÀÀÀÀÀÀÀ
€€€€€€€
@@@@@@@
,,,,,,,
ÀÀÀÀÀÀÀ
€€€€€€€
@@@@@@@
,,,,,,,
ÀÀÀÀÀÀÀ
€€€€€€€
@@@@@@@
,,,,,,,
741
742
▲
Use with Model #
R161 R242 R342 7681
R162 R261 R361 7682
R262 R362 7621
7622
▲
FBK5
BR5702 Bracket
FBK7 Midflow Brackets
Use with Model #
F373 F383 L373 L383
F374 F384 L374 L384
F376 F386 L376 L386
Use with Model #
F352
F353
F354
L352
L353
L354
L452
L453
L454
▲
▲
RBK5
ACA Pipe Brackets
Mounting bracket for Tri•Star, Midflow, and
precision regulators listed below. Also can
be used for Tri-Star FRL Combination units.
Mounting bracket for use with
Tri-Star FRL’s.
Example: N33354
PKR35
,,,,,,,
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
,,,,,,,
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
,,,,,,,
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
,,,,,,,
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
Model NPT
Use with Model #
ACA-5
ACA-6
ACA-7
R352 P10-02 P14-02
R353 P10-03 P14-03
R354
P14-04
Use with Model #
VC7510
VC7510XL
VC7525
FBK3 Bracket
1.50
/4”, 3/8” 21/2”
1
/2”, 3/4” 21/2”
1”
21/2”
B
C
/
3/16”
3/16”
/
5
1 /32”
11/2”
3 16”
3 4”
D
E
37/8” 21/16”
37/8”
37/8”
▲
▲
F
2.31
.40
.35
.70
.30
.22
.44
1.00
.73
.32
2.58
1.20
1.50
1.60
1.72
3.50
2.51
ÀÀÀÀÀÀ
,,,,,,
@@@@@@
€€€€€€
,,,,,,
@@@@@@
€€€€€€
ÀÀÀÀÀÀ
,,,,,,
@@@@@@
€€€€€€
ÀÀÀÀÀÀ
,,,,,,
@@@@@@
€€€€€€
ÀÀÀÀÀÀ
Use with Model #
Use with Model #
F300-01 L181
F300-02 L182
F500-01
F500-02
R373
R376
Accessories
G
5/8”
/
13
5
1 /16” 1 /16” 5/8”
15/8” 111/16” 5/8”
15 16”
RBK7 Bracket
▼
▲
ABK-10
A
1
65
R374
R378
Q U A L I T Y A I R P R E P ARA TION EQUIPMENT
A R R O W
REFRIGERATED AIR DR Y E R S
P N E U M A T I C S
REGENERATIVE AIR DRYERS
SINTERED PRODUCTS
Distributed by:
Arrow Pneumatics, Inc.
2111 W. 21ST Street
Broadview, Illinois 60155-4627
Voice: (847) 438-9100
Fax:
(708) 343-1907
Internet: www.arrowpneumatics.com
X2008
Revised 4/98
X2008
Revised 5/00
Fluid Power Accessories
PNEUMATIC EXHAUST MUFFLERS
BREATHER VENTS
Breather Vents
2,3
Exhaust Mufflers
2-5
Reclassifiers / Mufflers
6,7
Speed Control Mufflers
8,9
In-Line Filter Bushings
10
In-Line Filters
SPEED CONTROL MUFFLERS
IN-LINE FILTERS
IN-LINE TOOL FILTER
10-12
Economatic Drains
13
Air Flow Check Valves
13
Pressure Snubbers
14
Lockout Slide Valves
14
Pressure Switch
15
Differential Pressure Indicator
15
Mini In-Line Desiccant Dryer
15
Arrow Pneumatics
Fluid Power Accessories
BREATHER VENTS
These breather vents have many applications, including
vacuum relief or pressure equalization on gear boxes, oil
tanks or reservoirs. Common uses can be found on single
acting cylinders or valves to prevent dirt and foreign
particles from entering ports open to the atmosphere.
Units have a nickel plated steel insert. All have standard pipe
thread fittings for quick assembly and removal for cleaning.
The filter element within the standard breather vent is rated
for 40 micron filtration and can also be obtained for 20 or 90
micron filtration on special order.
part no.
NPT
See performance charts for flow characteristics.
ASP-1BV
ASP-2BV
ASP-3BV
ASP-4BV
ASP-6BV
ASP-8BV
ASP-10BV
ASP-12BV
Maximum operating pressure: 150 PSI
Operating temperatures: 35ºF to 300ºF
part no.
BSP
thread
size
overall
length
ASP-1BVBS
ASP-2BVBS
ASP-3BVBS
ASP-4BVBS
---------
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
7/16”
7/16”
9/16”
5/8”
11/16”
3/4”
7/8”
7/8”
1 1/16”
1”
1 5/16” 1 5/16”
dia.
2”
.01
.02
.04
.06
.10
.23
.41
.56
dia.
weight
lbs.
1 13/32” 1 11/16”
1 1/2”
weight
lbs.
PNEUMATIC EXHAUST MUFFLERS
Quiet Flow muffler/filters utilize porous sintered bronze
directly bonded to nickel plated steel pipe thread fillings
to diffuse air and muffle noise from the exhaust ports or
valves, cylinders and air tools. These units offer a
combination of small size with the greatest possible
sound deadening qualities to reduce exhaust noise to
acceptable levels within OSHA noise requirements.
In addition, these units are used as filters for gasoline, oil
and air. Standard unit contains a 40 micron element, and
20 or 90 micron units are available on special order.
Model ASP-420 is a female thread (1/2” - 20) muffler for
use on exhaust ports of most solenoid valves. It can be
used with “exhaust to atmosphere” valves, including
Skinner, Peter Paul, Allied, KIP, Pre Dyne or any muffler
using 1/2” - 20 threads on the sleeve.
part no.
NPT
ASP-M*
ASP-1
ASP-2
ASP-3
ASP-4
ASP-6
ASP-8
ASP-10
ASP-12
ASP-420**
See performance chart for flow information
and sound characteristics.
Maximum operating pressure: 300 PSI
Operating temperatures: 35oF to 300oF
part no.
BSP
--ASP-1BS
ASP-2BS
ASP-3BS
ASP-4BS
consult
consult
consult
consult
factory
factory
factory
factory
---
* Furnished with gasket.
** Female threads -- fits most
solenoid valve exhaust ports.
thread
size
overall
length
10”-32 45/64” 5/16”
1 1/8”
1/8”
7/16”
1 3/8”
1/4”
9/16”
1 1/2” 11/16”
3/8”
1 7/8”
1/2”
7/8”
2 1/4” 1 1/16”
3/4”
2 7/8” 1 5/16”
1”
1 1/4” 3 1/4” 1 11/16”
2”
1 1/2” 3 11/16”
5/8”
1/2”-20 1 3/16”
.01
.02
.04
.06
.10
.18
.34
.62
.88
.04
FEM
Arrow Pneumatics, Inc. has a long reputation as a world-leading manufacturer of sintered bronze elements
and products. This reputation is built on producing high quality products with an ongoing commitment to
exceed customer expectations.
All products are manufactured in the U.S.A. and marked with our logo to assure you are receiving
genuine Arrow Pneumatics, Inc. sintered bronze components.
When it comes to features, performance and value, look for Arrow Pneumatics, Inc.
elements and products.
-2-
logo-marked sintered bronze
Fluid Power Accessories
Arrow Pneumatics
FLOW CHARACTERISTICS -- BREATHER VENTS
FLOW CHARACTERISTICS -- PNEUMATIC EXHAUST MUFFLERS
SOUND CHARACTERISTICS -- PNEUMATIC EXHAUST MUFFLERS
ASP-1: 1/8”
back
flow
pressure (SCFM)
(PSIG)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ASP-2: 1/4”
ASP-3: 3/8”
ASP-4: 1/2”
ASP-6: 3/4”
ASP-8: 1”
dB
flow
(SCFM)
dB
flow
(SCFM)
dB
flow
(SCFM)
dB
flow
(SCFM)
dB
flow
(SCFM)
dB
4
72
5
75
9.5
81
17
92
32
99
45
109
5
72
8
75
14
83
28
94
50
101
68
107
6
73
12
76
16.5
83
35
98
63
101
84
106
7
73
15
82
18.5
83
42
99
75
102
104
106
7
76
16
83
20
84
48
100
88
102
122
106
9
78
19
84
22
84
53
101
101
102
138
106
11
80
21
84
23.5
85
57
101
112
103
154
106
Inlet pressure 100 psi.
-3-
ASP-10: 1 1/4”
ASP-12: 1 1/2”
flow
(SCFM)
dB
flow
(SCFM)
dB
38
102
52
111
54
103
82
112
70
107
108
111
85
106
126
110
110
105
150
109
131
105
162
109
154
105
---
---
Arrow Pneumatics
Fluid Power Accessories
SUPER QUIET FLOW
ECONOMY PNEUMATIC SILENCERS / MUFFLERS
A new concept in muffler design incorporates a 50 mesh,
self-cleaning, stainless steel screen in a strong, protective
glass-filled nylon housing which is ultrasonically welded
for maximum strength.
This unit offers greater flow with less pressure drop than the ASP
Series, while reducing noise levels. See performance charts for
flow information and sound characteristics.
Maximum operating pressure: 150 PSI
Operating temperatures: 35oF to 120oF
SOUND CHARACTERISTICS -- PNEUMATIC SILENCERS / MUFFLERS
-4-
part
no.
NPT
overall
length
diameter
weight
lbs.
SQF-1
SQF-2
SQF-3
SQF-4
1/8”
1/4”
3/8”
1/2”
2 7/64”
2 15/64”
3 27/64”
3 35/64”
13/16”
13/16”
1 1/4”
1 1/4”
.02
.03
.09
.09
Fluid Power Accessories
Arrow Pneumatics
SUPER QUIET FLOW
HEAVY-DUTY METAL PNEUMATIC SILENCERS / MUFFLERS
Units 1/8” through 1” feature a 50 mesh, self-cleaning, stainless steel screen,
corrosion-resistant aluminum shell, high flow and minimal back pressure.
When installed on the exhaust ports of pneumatic valves, metal pneumatic
silencers are a quick and inexpensive way to help reduce work area noise.
At the same time, they protect the inside of pneumatic valves from
contamination which can enter through the exhaust ports.
part
no.
NPT
female
overall
length
flats
weight
lbs.
ASQF-1F
ASQF-2F
ASQF-3F
ASQF-4F
ASQF-6F
ASQF-8F
ASQF-10F
ASQF-12F
ASQF-16F
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
1 7/8”
1 7/8”
3 1/4”
3 1/4”
4 5/8”
4 5/8”
5 1/2”
5 1/2”
6 7/16”
5/8”
5/8”
1”
1”
1 5/8”
1 5/8”
2 1/2”
2 1/2”
3”
.05
.06
.23
.38
.56
.58
.75
.81
1.62
part
no.
NPT
male
overall
length
flats
weight
lbs.
ASQF-1M
ASQF-2M
ASQF-3M
ASQF-4M
ASQF-6M
ASQF-8M
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1
1
3
3
4
4
5/8”
5/8”
1”
1”
1 5/8”
1 5/8”
.06
.06
.21
.23
.56
.58
7/8”
7/8”
1/4”
1/4”
5/8”
5/8”
See performance charts for flow information and sound characteristics.
SHELL CONSTRUCTION: Aluminum.
Maximum supply pressure: 300 PSI
Operating temperatures: 35oF to 160oF
CAUTION: Operation at temperatures approaching
32oF could result in freeze up due to air line moisture.
FLOW CHARACTERISTICS -- PNEUMATIC SILENCERS / MUFFLERS
-5-
Arrow Pneumatics
Fluid Power Accessories
SUPER QUIET FLOW RECLASSIFIERS / MUFFLERS
PATENTED
Used Reclassifier
Element RemovesMuffler Stays in Place
The reclassifier / muffler is used to treat exhaust air in many in-plant and white
room pneumatic operations. It can be installed as a completely new unit or its
patented coalescing reclassifier element can be purchased separately for installation
on existing ASQF mufflers.
MEETS OSHA LIMITS SET TO REDUCE SOUND LEVELS
AND EXHAUSTED OIL MIST.
Per OSHA 1910.95, a worker must not be exposed to sound levels above 90 dBA for any
eight-hour work shift of a 40-hour work week. Per OSHA 29CFR 1910.10, a worker’s
cumulative exposure to oil mist must not exceed 4.32 particles per million (PPM) in any
eight-hour work shift of a 40-hour work week. Based on an intake of 50 PPM at 100 PSIG,
the reclassifier / muffler reduces the exhausted oil mist to .015 PPM. The reservoir has a
drain plug that is also designed for use with continuous 1/4” drain tubing.
PATENTED
WRAP
DESIGN
Maximum operating conditions: 160 SCFM, 300 PSIG
Maximum operating temperature: 160oF
RECLASSIFIER / MUFFLER
part
no.*
RQM20-1M
RQM20-1F
RQM20-2M
RQM20-2F
RQM40-3M
RQM40-3F
RQM40-4M
RQM40-4F
RQM80-6M
RQM80-6F
RQM80-8F
RQM80-8F
NPT
overall
length
1/8”
RECLASSIFIER REPLACEMENT ELEMENT
width
reservoir
capacity
weight
lbs.
3 1/8”
1 5/8”
.5 oz.
.075
1/4”
3 1/8”
1 5/8”
.5 oz.
.075
3/8”
4 3/4”
2 7/16”
1.4 oz.
.220
1/2”
4 3/4”
2 7/16”
1.4 oz.
.220
3/4”
6 1/4”
3 5/16”
3.5 oz.
.575
1”
6 1/4”
3 5/16”
3.5 oz.
.575
part
no.
RQMK20
RQMK20
RQMK20
RQMK20
RQMK40
RQMK40
RQMK40
RQMK40
RQMK80
RQMK80
RQMK80
RQMK80
overall
length
width
weight
lbs.
2 3/4”
1 5/8”
.04
2 3/4”
1 5/8”
.04
4 5/16”
2 7/16”
.10
4 5/16”
2 7/16”
.10
5 1/2”
3 5/16”
.21
5 1/2”
3 5/16”
.21
*Suffix F designates female thread, M male thread.
FLOW CHARACTERISTICS -- RECLASSIFIERS / MUFFLERS
-6-
Fluid Power Accessories
Arrow Pneumatics
SOUND CHARACTERISTICS -- RECLASSIFIERS / MUFFLERS
-7-
Arrow Pneumatics
Fluid Power Accessories
SPEED CONTROL MUFFLERS
Quiet Flow speed control mufflers provide an infinite
variation of metering air flow at an acceptable sound
level on exhaust ports of air valves with complete safety.
With linear adjusting ability, the speed of an operating
cylinder or air tool may be increased or decreased with
the adjusting screw. The final position is then locked in
place by the lock nut. Objectionable exhaust air noise is
eliminated by the surrounding sleeve of sintered bronze.
Complete safety in operation is featured in Quiet Flow
speed control mufflers. The sintered bronze sleeve is held
securely in position and protected by an integral shroud.
Unit contains a 40 micron element.
NPT
max adj
flow
SCFM
approx
height
full oper
hex
weight
lbs
ASP-1SC
ASP-2SC
ASP-3SC
ASP-4SC
ASP-6SC
ASP-8SC
1/8”
1/4”
3/8”
1/2”
3/4”
1”
20
30
40
60
70
100
1 5/16”
1 9/16”
1 5/8”
2”
2 3/8”
2 1/2”
1/2”
9/16”
11/16”
7/8”
1 1/16”
1 5/16”
.07
.09
.14
.25
.42
.56
ASP-1SCH
ASP-2SCH
ASP-3SCH
ASP-4SCH
1/8”
1/4”
3/8”
1/2”
30
40
60
70
1 9/16”
1 5/8”
2”
2 3/8”
9/16”
11/16”
7/8”
1 1/16”
.09
.14
.25
.42
part
no.*
High flow units offer more surface area
for increased flow.
Maximum operating pressure: 300 PSI
Operating temperatures: 35oF to 300oF
*Suffix H indicates high flow.
FLOW CHARACTERISTICS VS. ADJUSTMENT - SPEED CONTROL MUFFLERS
-8-
Fluid Power Accessories
Arrow Pneumatics
FLOW CHARACTERISTICS VS. ADJUSTMENT
SOUND CHARACTERISTICS VS. ADJUSTMENT
-9-
Arrow Pneumatics
Fluid Power Accessories
IN-LINE TOOL FILTER
This unique, compact in-line filter provides low
pressure drop, high air flow and is designed for
air tools. The inlet can be attached directly to
pneumatic air tools, protecting the tool with a
40 micron sintered metal element. The bronze
element has a large surface area allowing long
service before cleaning. But best of all the
filter weighs less than 1/2 ounce.
Maximum operating pressure: 500 PSIG
Operating temperatures: 35oF to 300oF
part
no.
9132
NPT
male x female
overall
length
hex
weight
oz
1/4”
1 9/16”
5/8”
.5
IN-LINE NIPPLE FILTERS
This inexpensive disposable in-line nipple filter
is ideal for the filtration of water, oil and air.
It is compact and lightweight and can be installed
at the point of use. Unique unit construction
features a brass fitting that contains a conically
shaped, porous sintered bronze filter element.
The shape of the filter element is conical, rather
than disc, to provide a larger filtering flow and
a true, uninterrupted axial flow.
The porous sintered bronze element is available in
the nominal filtration rating of 40 or 90 microns to
insure minimum pressure drop.
Maximum operating pressure: 300 PSI
Operating temperatures: 35oF to 300oF
FLOW CHARACTERISTICS -- IN-LINE NIPPLE FILTERS
- 10 -
part
no.
NPT
ASP3101-40
ASP3101-90
ASP3102-40
ASP3102-90
ASP3103-40
ASP3103-90
ASP3104-40
ASP3104-90
1/8”
1/8”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
overall
length
1
1
1
1
1
1
1/4”
1/4”
1/2”
1/2”
3/4”
3/4”
2”
2”
hex
weight
lbs
7/16”
7/16”
9/16”
9/16”
11/16”
11/16”
7/8”
7/8”
.04
.04
.08
.08
.14
.14
.86
.86
Fluid Power Accessories
Arrow Pneumatics
AIR / OIL IN-LINE FILTERS
This in-line filter is designed specifically for the
protection of small air tools, such as impact
wrenches, nut runners, grinders and screwdrivers.
It reduces downtime, prevents costly tool repairs
and extends tool life.
The all-anodized, lightweight aluminum housing
is compact and can be used directly before the
air tool. Elements can be replaced quickly at
nominal cost.
The standard element is 40 micron, which
insures minimum pressure drop. Elements
can be obtained in 20 or 90 micron filtration
on special order.
part
no.*
9071
9072
9073
9074
9074M
9076
9076M
NPT
overall
length
diameter
weight
lbs
element
& seal
spring
kit
1/8”
1/4”
3/8”
1/2”
1/2”
3/4”
3/4”
2 5/16”
2 5/16”
2 5/16”
3 1/4”
3 13/16”
3 1/4”
3 13/16”
3/4”
3/4”
3/4”
1 1/2”
1 1/2”
1 1/2”
1 1/2”
.08
.08
.08
.46
.46
.46
.46
EK9072
EK9072
EK9072
EK9074
EK9074
EK9074
EK9074
SK9072
SK9072
SK9072
SK9052
SK9052
SK9052
SK9052
*Use Suffix V for viton seals. For 90 or 20 micron elements, use micron size as dash
number and add to part no. (i.e. 9072-20; EK9072-20).
The in-line filter can also be used in low pressure
hydraulic applications. When using for hydraulic
applications, a 20 micron element is recommended. Special viton O-rings are available for oil
systems where chemical action may be a problem.
Maximum operating pressure: 500 PSI
Operating temperatures: 35oF to 200oF
For viton: 35oF to 400oF
FLOW CHARACTERISTICS -- AIR / OIL IN-LINE FILTERS
- 11 -
Arrow Pneumatics
Fluid Power Accessories
HYDRAULIC IN-LINE FILTERS
This hydraulic in-line filter provides protection for small,
high pressure systems up to 3,000 PSI. By using this filter
at the pressure side of a pump, foreign particles 25 microns
and larger, such as those created by pump wear, are
removed before damage can result to the valving in the
system. A sintered bronze element ensures protection
against crushing should dirt accumulate and increase
pressure drop across the element.
The unique construction features an anodized aluminum
housing for light weight, and a conically shaped sintered
bronze element positioned by a retaining spring to allow
true, uninterrupted axial flow. Special viton O-rings are
available for oil systems where chemical action may be a
problem. The standard 25 micron bronze filter element can
be easily cleaned or replaced. Nominal filtration ratings of
90, 40, or 10 microns available.
Maximum operating pressure: 3000 PSI
Operating temperatures: 35oF to 200oF
For viton: 35oF to 400oF
part
no.*
9052
9053
9054
9056
9152
9153
NPTF
1/4”
3/8”
1/2”
3/4”
9/16”-18 SAE
3/4”-16 SAE
overall
length
3 1/4”
3 1/4”
4 15/16”
4 15/16”
3 1/4”
3 1/4”
diameter
1
1
1
1
1
1
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
weight
lbs
element
& seal
spring
kit
.46
.46
.83
.83
.46
.46
EK9052
EK9052
EK9054
EK9054
EK9052
EK9052
SK9052
SK9052
SK9054
SK9054
SK9052
SK9052
*Use Suffix V for viton seals. For 90, 40, or 10 micron elements, use micron size as dash number and add to part no. (i.e. 9052-10; EK9052-10).
HYDRAULIC IN-LINE FILTERS -- TEE-TYPE
This in-line filter provides protection for small, high pressure systems up to 5,000 PSI. The design is similar in performance to the model 9052 and 9053 filters, with the added
convenience of a cleanable element that can be removed
without breaking line connections. A filter access cap simply
unscrews for easy element cleaning and replacement.
The anodized aluminum housing is lightweight. Porting is
1/4”, 3/8” or 9/16”-18 SAE NPT pipe. Viton O-rings are
offered for oil systems where chemical action may be a
problem. The standard bronze filter element is 25 micron.
Nominal filtration ratings of 90, 40, or 10 microns available.
Maximum operating pressure: 5,000 PSI
Operating temperatures: 35oF to 200oF
For viton: 35oF to 400oF
part
no.*
9052T
9053T
9152T
NPT
1/4”
3/8”
9/16”-18 SAE
overall
length
diameter
weight
lbs
element
& seal
spring
kit
3 3/16”
3 3/16”
3 3/16”
2 1/8”
2 1/8”
2 1/8”
.93
.93
.93
EK9052
EK9052
EK9052
SK9052T
SK9052T
SK9052T
*Use Suffix V for viton seals. For 90, 40, or 10 micron elements, use micron size
as dash number and add to part no. (i.e. 9052T-10; EK9052-10).
FLOW CHARACTERISTICS -- HYDRAULIC IN-LINE FILTERS
- 12 -
Fluid Power Accessories
Arrow Pneumatics
ECONOMATIC DRAINS
ECONOMATIC drains are used to automatically drain filters,
tanks, drain legs, aftercoolers and receivers. To trap large debris
and sludge, a Y-strainer is included with the drain.
The drain can be set for manual operation or the drain interval
and duration times can be preset. The drain interval can be
adjusted between one to 60 minutes and the drain duration can
be set from one to 30 seconds. The drain features: solid state
adjustable controls, a corrosion-resistant, waterproof, molded
solenoid coil, Buna N seals, a brass and stainless valve, a rustand corrosion-proof NEMA 1 enclosure, an indicator light, and
a heavy-duty, grounded, six-foot power cord.
part
no.
5702S
5704S
NPT
length
dimensions
depth
height
weight
lbs.
1/4”
1/2”
4 15/16”
5 7/16”
4 7/16”
4 7/16”
3 11/16”
4 3/16”
1.6
2.4
Maximum operating pressure: 200 PSIG
Maximum fluid temperature: 165oF
Ambient temperatures: 35oF to 165oF
Voltage: 115/1/60 Amps: .25
AIR FLOW CHECK VALVES
These are designed to protect workers from accidents caused by air hose
whip, a potentially dangerous situation that occurs when air hoses snap
while under high pressure loads.
When an air hose ruptures, the flow check valve senses an increase in air
flow and automatically reduces the flow to a safe level. As a reminder to
shut off the air supply before replacing the ruptured hoses, the check valve
has an exhaust bleed rate of 9 SCFM at 100 PSI.
These units are easy to install. The inlet pipe port of the check valve is
threaded into the compressed air line upstream of the air hose. The air
hose is threaded into the outlet port of the check valve.
part
no.
5074
5076
NPT
shut off
range*
SCFM
overall
length
flats
weight
lbs.
1/2”
3/4”
85 +/- 10
100 +/- 10
3 7/8”
3 7/8”
1 1/2”
1 1/2”
.44
.40
*Based on an inlet pressure of 100 PSIG.
FLOW CHARACTERISTICS -- AIR FLOW CHECK VALVES
- 13 -
CONSTRUCTION: Protective, yet lightweight,
anodized aluminum housing.
Maximum operating pressure: 300 PSI
Maximum temperature: 160oF
Arrow Pneumatics
Fluid Power Accessories
PRESSURE SNUBBERS
These units protect pressure instruments from sudden shock and ensure accurate gauge
readings without surges and fluctuations. They use a brass housing with a porous bronze
element and are capable of handling pressures to 10,000 PSI maximum. Unit also serves
as an excellent mini in-line filter. Dry seal pipe threads are standard. SAE threads available
upon special request.
Each unit is packaged with five
elements of different micron
ratings to allow each user to
adjust snubbing capacity for
the specific application. Low
cost and designed for quick
and simple change of elements
make cleaning unnecessary.
RECOMMENDED ELEMENT POROSITY RATING
recommended
application
micron
rating
color
code
40
30
25
20
10
none
black
brown
green
red
part
no.
NPT
overall
length
diameter
weight
lbs.
1/4” M 1/4” F
1 3/8”
3/4”
.15
602
602-E
viscose fluids (over 500 SSU)
med. type oils (225 to 500 SSU)
water and light oils (30 to 225 SSU)
low viscosity fluids (under 30 SSU)
air and other gases
Maximum operating pressure: 10,000 PSI
Operating temperatures: 35oF to 300oF
.03
5 replacement elements for 602.
Specify micron rating desired.*
*Example: 602-E-40
LOCKOUT SLIDE VALVES
Lockout slide valves protect workers performing service on equipment powered by
pneumatic, hydraulic or electrical energy. With a customer-supplied padlock, they
allow equipment to be locked out from the energy source. A standard industrial
grade padlock with 1/4” diameter shackle is recommended.
THREE-WAY SLIDE VALVES MEET OSHA LOCKOUT STANDARD
29CRF 1910.147 when used with a customer-supplied padlock and identification
tag. The three-way slide valve is for use in the main line, upstream of equipment.
When closed, it shuts off the upstream air and exhausts the downstream air.
Body is black e-coat. Slide is 5% Teflon, high-impact, safety yellow plastic.
Seals are pre-lubricated Buna O-rings. Screws are black coated steel.
Maximum operating pressure: 250 PSIG
Maximum operating flow: 140 SCFM
Operating temperatures: 35oF to 150oF
Exhaust bleed at 100 PSI: 7 SCFM
part
no.
V202
V203
V204
NPTF
1/4”
3/8”
1/2”
avg.
Cv
2.7
6.4
6.4
overall
length
3 1/8”
3 1/8”
3 1/8”
width
depth
1 11/16”
1 11/16”
1 11/16”
1 15/16”
1 15/16”
1 15/16”
weight
lbs.
.40
.40
.40
FLOW CHARACTERISTICS -- LOCKOUT SLIDE VALVES
- 14 -
Fluid Power Accessories
Arrow Pneumatics
PRESSURE SWITCH
The PDA4 pressure switch can be installed anywhere in a pneumatic or hydraulic system.
It is often used to protect air compressors and pneumatically operated equipment from damage
caused by over-pressurization. The unit can be set in a normally open or closed position in an
adjustable actuation range from 10 PSIG to 110 PSIG with a +/-2% repeatability.
The pressure switch has standard 18” wire leads of 300 V, 22 SWG.
For simple installation, thread the unit into the gauge port of a regulator or pipe tee.
CONSTRUCTION: Zinc die cast and plastic housing, and NEMA 13 electrical enclosure
which is UL approved.
Maximum operating pressure:
300 PSI
Operating temperatures: 35oF to
180oF
part
no.
PDA4
NPT
overall
length
diameter
weight
lbs.
voltage
inductive
resistive
1/4”
1 5/8”
1 1/8”
.25
125/150/VAC
5 AMP
7 AMP
standard electrical current
WIRE COLOR
CIRCUIT
black
green
red
common
normally closed
normally open
Note: 20% differential for reset, and 1% repeatability when operated within recommended conditions.
MINI IN-LINE DESICCANT DRYER (-40OF DEW POINT)
Used at the point-of-use, this patented, disposable, mini in-line desiccant dryer removes all
traces of water vapor, oil vapor and dirt. It is often used directly upstream of blow guns or
spray guns as final protection for critical parts blow off and paint spraying. Install in either
direction; it functions in both directions. A 40 micron, porous bronze element removes
fine dirt particles, an oil-removing media removes oil vapor and desiccant beads absorb
water vapor. The see-through housing shows desiccant color change, which indicates that
the dryer needs to be replaced. Full charge is a blue color, when the color changes to dark
pink, filter needs to be replaced.
CONSTRUCTION: The housing is made of polycarbonate material which allows
clear desiccant visibility. The large opening in the nylon guard shows color change
when dryer needs replacing.
Maximum operating pressure: 125 PSI
Maximum flow capacity: 15 SCFM
Operating temperatures: 35oF to 130oF
part no.
DFD-10
NPT/FPT
1/4”
dimensions (inches)
length
diameter
3 3/4”
1 11/16”
weight
oz.
2.8
ARROW INLINE Y-STRAINER
The Arrow inline Y strainer, when installed before a valve or drain will trap large
debris and sludge. This application prevents malfunctions and extends the life of
valves or drains.
Maximum pressure: 300 PSI WOG
150 Steam
CONSTRUCTION: Cast bronze housing and cap, stainless steel 50 mesh screen
3/8” Brass plug standard for quick draining.
Special Feature: Maintenance can be done without removal of unit from line.
DIMENSIONS
model
no.
S202
S204
- 15 -
NPT
A
dimensions
B
C
weight
oz.
1/4”
1/2”
15/32”
11/16”
2 5/8”
2 7/8”
2 11/16”
2 11/16”
10.5
12.6
ARROW PNEUMATICS, INC. WARRANTY
LIMITED WARRANTY -- Arrow Pneumatics warrants each Fluid Power and Sintered Product against defects in material and workmanship for a period of one year from date of original shipment. In the event of such defects within the warranty period, the
Company will, at its option, replace or recondition the product without charge. This shall constitute the exclusive remedy for breach
of warranty, and the Company shall not be responsible for any incidental or consequential damages, including without limitation
damages or other costs resulting from labor charges, delays, vandalism, fouling caused by foreign material, damage from adverse air
conditions, chemicals, or any other circumstances over which the Company has no control. This warranty shall be invalidated by any
abuse, misuse, misapplication or improper installation of the product.
THE COMPANY MAKES NO OTHER WARRANTY. ALL OTHER WARRANTIES, ORAL OR WRITTEN, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A SPECIFIC PURPOSE ARE HEREBY
EXCLUDED AND DISCLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
The liability of the company for all loss or damage resulting from nonconforming goods or tender, including breach of any and all
warranties, shall be limited to refund of the purchase of the particular goods with respect to which the loss or damage occurred.
Arrow Pneumatics, Inc. has a long reputation as a world-leading manufacturer of sintered bronze elements and
products. This reputation is built on producing high quality products with ongoing commitment to meet customer
expectations.
All products are manufactured in the U.S.A. and marked with a
Arrow Pneumatics, Inc. sintered bronze components.
logo to assure you are receiving genuine
Wen it comes to features, performance and value, look for Arrow Pneumatics, Inc.
bronze elements and products.
ARROW PNEUMATICS, INC
2111 W. 21st Street Broadview, IL 60155 (847)438-9100
logo marked sintered
FAX (708)343-1907
X3000 August 2000
Refrigerated
Dry Air Technology
b y
A r r o w
Quality Air Preparation Equipment
P n e u m a t i c s
STEP 1
STEP 4
Hot, moist air from the air
compressor enters the heat
exchanger where it is cooled.
Air is now sent back to the airto-air heat exchanger where it
is reheated for plant use.
STEP 2
Air now moves from the
air-to-air heat exchanger
to the refrigerant-to-air
heat exchanger where it
is cooled to 35ºF.
Hot Gas Bypass System
Controls refrigerant suction pressure in
refrigerant - to - air heat exchanger. This
allows trouble-free operation under zero
load without danger of freeze-up.
Instruments
Full instrumentation
permits complete monitoring
of dryer operation under all
operating conditions.
Suction Line Accumulator
Included on all units 1/2 h.p. and larger; protects
compressor under varying loads by preventing
liquid refrigerant from returning to refrigerant
compressor, which could cause damage.
STEP 3
Chilled air now enters
the separator where the
moisture is separated
from the incoming air.
The air is now at 35ºF
dew point
Modular
Construction
Main heat exchangers 100% copper
tubing, an air-to-air and a refrigerantto-air, are made up of a stack of individual coils with a common header at
each end. Each double tube coil is
individually fed by a refrigerant line
from the expansion valve to eliminate
hot spots and insure the most efficient
cooling of air in the inner tube.
Heavy Duty Automatic Drain
Trouble-free, heavy-duty steel, ball float
type, is externally mounted for easy
monitoring and service.
Refrigerant Feeder
Assembly
Refrigerant is metered in equal
amounts to each coil so refrigerant is
evenly spread throughout the entire
heat exchanger system. Utilizes quick
response expansion valves instead of
cheaper capillary tubes.
-1-
Controls
Highest quality controls are used
throughout:
• Oil pressure safety switch
protects compressor in case of
low oil pressure.
• Water regulating valve,
standard on water cooled units,
conserves water usage.
• Low pressure and high pressure
cutout switches protect
refrigerator system from unsafe
operating conditions.
Arrow’s Exclusive
Spiral Fin Heat Exchanger
Arrow spiral fin tubing acts as a cold mechanical separator.
sThe fins create turbulent flow and rotate the moisture laden air as
it passes through the tubing. The turbulent flow and centrifugal
forces generated cause the moisture and fog to condense rapidly
and completely into water droplets. These droplets are trapped in
the grooves between the fins and are easily removed by a
mechanical separator.
. . .Versus Smooth Tube Heat Exchanger
By contrast, smooth tubing does not effectively tumble the air to
cause all the molecules to come into contact with the cold tubing.
Additionally, laminar flow does not permit effective condensation,
and much of the condensate leaves the tube in the form of fog. A
mechanical separator will not remove this fog and it is passed into
the air stream in the form of a much higher dew point.
New! Braze Plate Design
New Arrow brazed plate heat exchangers in our “F-Series” dryers, Models F-10/20 thru
F-150, provide turbulent flow, high heat transfer coefficients, lower pressure drops, in a
compact size. These heat exchangers are made up of corrugated “herringbone” patterned AISI
316 type stainless steel channel plates. These plates are brazed together by using 99.9% pure
copper, at all contact points and creates a completely hermetically sealed unit.. They are helium
leak tested for internal and external leaks down to a volumetric equivalent to less than
2.8 grams of R-22 refrigerant per year. Arrow Pneumatics has incorporated this design in the
new “F-Series” line of dryers. Our goals are to provide you with quality products adding higher
efficiencies, reduced cabinet sizes, simplified installations and lower shipping costs
Automatic Pump-Down System
Runs for a short period after dryer is shut down to pump
accumulated refrigerant from low pressure side of refrigerant
system. Standard on all larger units. This prevents liquid
refrigerant from migrating back to the compressor during shutdown, which could cause any refrigerant compressor to fail.
Crankcase Heater
Standard on 1-1/2 hp. and larger units. Keeps liquid
refrigerant from contaminating compressor lubricating
oil by heating refrigerant above evaporation point.
Further protection for your system.
Semi-Hermetic Compressor
Semi-hermetic compressors are standard on 500 CFM to 2,500
CFM “C” series cycling dryers, as well as all units 3,000 cfm and
above. These refrigerant compressors are more efficient and have a
longer life than hermetic compressors.
They provide substantial energy
savings at less than full-load
conditions.
-2-
ARROW PNEUMATICS
Manufactures a wide range of environmentally-friendly, CFC-free refrigerant air dryers to accommodate flows
from 5 scfm to 15,000 scfm to meet your compressed air system needs.
F-05/10 thru F-30/40
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Entire Heat Exchanger Thermally Insulated
Stainless Steel Heat Exchanger
Built-in 40 Micron Particulate Filter
R-134A Refrigerant
Compressor Thermal Overload
Mechanical Moisture Separator with Automatic
Float Type Drain @ 99.97% Efficiency
• Constant Pressure Expansion Valve
• Refrigerant Suction Pressure Gauge*
*F-10/20 & F-30/40
• Electrical Cord with Grounded Plug
(115 volt units only)
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
F-50
•
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Entire Heat Exchanger Thermally Insulated
Stainless Steel Heat Exchanger
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
R-134A Refrigerant
Compressor Thermal Overload
Mechanical Moisture Separator
with Zero Air Loss Demand Drain
• Thermal Expansion Valve
• Refrigerant Suction Pressure Gauge
• 6 ft. Electrical Cord with Grounded
Plug (115 volt units only)
• Hot Gas Bypass System
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
F-70/100 & F-125
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Entire Heat Exchanger Thermally Insulated
Stainless Steel Heat Exchanger
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
Compressor Thermal Overload
Mechanical Moisture Separator
with zero air loss demand drain
• Thermostatic Expansion Valve
• Refrigerant Suction Pressure Gauge
• 6 ft. Electrical Cord with Grounded Plug
(115 volt units only)
• Suction Line Accumulator
• R-22 Refrigerant
• Air or Water Cooled Condensers*
*F125 Only
• Hot Gas Bypass System
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
F-150
• Pressure Dew Point as low as 35°F
• Entire Heat Exchanger Thermally Insulated
• Stainless Steel Heat Exchanger
• Built--in 90 Micron Particulate Filter
• Power Light On/Off Switch
• Compressor Thermal Overload
• Corrosion Resistant Coalescing Separator with 2
stage Separation and Zero Loss Demand Drain
• Thermostatic Expansion Valve
• Refrigerant Suction Pressure Gauge
-3-
• Air Inlet Temperature Gauge
• Air Inlet Pressure Gauge
• Max Operating Pressure Rated at 250 psi
• Suction Line Accumulator
• R-22 Refrigerant
• Hot Gas Bypass System
• Air or Water Cooled Condensers
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
Low dew point protection prevents frosting or freeze-up, and makes Arrow Pneumatics refrigerant air dryers the most requested
in the industry.
A-200
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Spiral Fin Tubing
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
R-22 Refrigerant
Mechanical Moisture Separator
with Zero Air Loss Demand Drain
• Thermostatic Expansion Valve
• Hot Gas Bypass System
• Suction Line Accumulator
•
•
•
•
•
•
•
•
•
Refrigerant Sight Glass
Refrigerant Filter-Dryer
Air or Water Cooled Condensers
Air Inlet Temperature Gauge
Refrigerant Suction Pressure Gauge
Air Inlet Pressure Gauge
One Year Warranty
Max. Operating Pressure Rated @ 250 psi
Five Year Heat Exchanger Warranty
A-250 & A-300
•
•
•
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Spiral Fin Tubing
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
R-22 Refrigerant
Mechanical Moisture Separator
with Zero Air Loss Demand Drain
Thermostatic Expansion Valve
Hot Gas Bypass System
Suction Line Accumulator
Refrigerant Sight Glass
•
•
•
•
•
•
•
Refrigerant Filter-Dryer
Air or Water Cooled Condensers
Refrigerant Suction Pressure Gauge
Air Inlet Temperature Gauge
Air Inlet Pressure Gauge
Digital Display Panel
Low Refrigerant Pressure
Safety Switch
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
• Five Year Heat Exchanger Warranty
Models 3512 thru 3519
• “C” Series Cycling Dryers Available
• Produce 340 to 1600 SCFM of Air
with a Pressure Dew Point as low as 35°F
• Spiral Fin Tubing
• Heavy-duty Automatic Drain Standard
• Mechanical Water Separator
• Refrigerant Filter Standard
• Digital Panel Display
• Quick Response Expansion Valve S tandard
-4-
• Hot Gas Bypass Valve Standard
• Crankcase Heater Standard
• Automatic Pump-down System
Standard on 3514 and up
• Suction Line Accumulator Standard
• Water Regulating Valve Standard on Water
Cooled Units
• One Year Warranty
• Five Year Heat Exchanger Warranty
3500 Series Continued and High Temperature 3-in-1 Dryers
Models 3521 thru 3560W
• “C” Series Cycling Dryers Available
• Produce 2,000 scfm to 5,000 scfm
of Air with a 35°F Pressure Dew Point at 100 psig
• NEMA 12 Electrical Enclosure
Standard (3523 and larger)
• Full Instrumentation to Monitor Performance
• Energy Savings up to 56% Available with Optional
Cylinder Uploaders
• Spiral Fin Tubing
• Heavy-duty Automatic Drain
• Mechanical Water Separator
•
•
•
•
•
•
•
Refrigerant Filter
Quick Response Expansion Valve
Hot Gas Bypass System
Suction Line Accumulator
Crankcase Heater
Automatic Pump-down System
Water Regulating Valve Standard on
Water Cooled Units
• Unsafe Condition Indicator Lights
• Five Year Heat Exchanger Warranty
Models 4041W thru 4046W
• Produce 5,000 scfm to 15,000 scfm
of Air with a 39°F Pressure Dew
Point at 100 psig
• 25 h.p. to 60 h.p. Motor, Carlyle
Semi Hermetic Compressor
• High Efficiency Motor and Starter
• Fused Disconnect Switch Standard
• NEMA 12 Electrical Enclosure
• Full Instrumentation to Monitor
Performance
• Power Factor Correction Equipment
Available
• Full Safety Controls with Everload
Protection for Compressor and Motor
• Unsafe Condition Shutdowns
• Energy Savings Up to 56% Available
with Optional Cylinder Unloaders
High Temperature 3-in-1 Air Dryers
• Flow Capacity Range 21- 400 SCFM
• 3-in-1 Design Eliminates the Need for
an Aftercooler, Separator and Drain
Trap Before the Air Dryer
• Pressure Dew Point as Low as 35°F
• Handles Inlet Air Temperature
Up to 180°F
• All Copper Spiral Fin Tube-In-Tube
Heat Exchanger Provides Maximum
Efficiency for Heat Transfer and
Moisture Separation
• Includes Monitoring Instrumentation,
Separator and DrainTrap
• 6 ft. Electrical Cord with Grounded Plug on
Models 3528 - 3531 with 115 volts
• Refrigeration Systems Utilize
Environmentally Safe R-134A
Refrigerant or R-22 Refrigerant
• Refrigerant Suction Pressure Gauge
• One Year Warranty
• Five Year Heat Exchanger Warranty
Note: 3528 – 3531 Max. Operating Pressure Rated@ 250 psi
-5-
Arrow Pneumatics refrigerant air dryers are energy efficient, with air-to-air and refrigerant-to-air heat exchangers to reduce energy consumption. Our “C” series cycling dryers are now available on 500 CFM and above units by using semi-hermetic compressors and
head unloaders.
“C” SERIES CYCLING DRYER
Arrow Model Numbers 3514C through 3560C
• Significant Energy Savings
• Longer Compressor Life Because of
Reduced Cycling Wear
•More BTU’s/HR Capacity per KW with
Semi-Hermetic Compressor
•No Dew Point Spikes which are Typical
with Other Types of Cycling Dryers
• Semi-hermetic Compressors have a
Three Times Longer Life than
Hermetic Compressors
•Superior Heat Exchanger Design with
Spiral Fin Tube Construction
Semi-Hermetic Compressor Performance
R-22 Refrigerant
Model
Flow
Energy
# of
Energy
1st Step
2nd Step
In/Outlet
Capacity
Step
Full Load
Savings Unloader KW Savings
Cylinders HP Connections Unloaders
Unloader
KW
SCFM
KW
3514-*C
3514W-*C
500
500
4
4
3
3
3” NPT
3” NPT
1 Step
1 Step
4.07
3.20
2.32
1.82
43%
43%
N/A
N/A
3515-*C
3515W-*C
625
625
4
4
3
3
3” NPT
3” NPT
1 Step
1 Step
4.07
3.20
2.32
1.82
43%
43%
N/A
N/A
3516-*C
3516W-*C
750
750
4
4
5
5
3” NPT
3” NPT
1 Step
1 Step
5.04
4.17
2.87
2.38
43%
43%
N/A
N/A
3517-*C
3517W-*C
1000
1000
4
4
5
5
4” FLG
4” FLG
1 Step
1 Step
6.51
5.25
3.71
2.99
43%
43%
N/A
N/A
3518-*C
3518W-*C
3519-*C
3519W-*C
1200
1200
4
4
6
6
6
6
5
5
6.5
6.5
10
10
4”
4”
6”
6”
6”
6”
1
1
2
2
2
2
Step
Step
Step
Step
Step
Step
7.13
5.87
9.37
8.11
14.56
13.30
4.06
3.35
43%
43%
28%
28%
28%
28%
N/A
N/A
4.12
3.57
6
6
4
10
10
15
6” FLG
6” FLG
6” FLG
2 Step
2 Step
1 Step
13.30
14.81
18.06
6
4
6
4
6
10
15
25
15
25
6”
6”
6”
6”
8”
2
1
2
1
2
Step
Step
Step
Step
Step
13.30
19.57
18.90
16.55
27.02
4
20
8” FLG
1 Step
16.55
3521-*C
3521W-*C
3548W-*C
3522-*C
3523-*C
3549W-*C
3524-*C
3550-*C
3550W-*C
3560-*C
3560W-*C
1600
1600
2000
2000
2300
2500
3000
3000
3750
4000
4000
5000
5000
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
All capacities above are based on design conditions of 100°F inlet, 100 PSIG and 100°F ambient.
-6-
6.75
5.84
10.48
9.58
9.58
10.48
10.29
9.58
11.10
14.45
9.43
20.93
9.43
28%
28%
43%
28%
43%
28%
43%
28%
43%
6.41
5.85
5.85
56%
56%
56%
56%
6.41
N/A
5.85
N/A
10.00
56%
56%
0%
56%
0%
56%
N/A
14.55
N/A
0%
56%
0%
* Voltage Codes
-3 - 208/3/60 or 200-240/3/50
-4 - 460/3/60 or 380/3/50
-5 - 575/3/60
Model
Maximum
Heat
Rejection
BTU/Hr.
Flow
Air Line
Drain Refrig.
Capacity at Listed
Conn.
Connect. Comp.
Dew Point SCFM In & Out
H.P.
Rating
Max.
Std.
Cool
Volt.
Water
Air
Code Instrum.
Flow GPM
Panel
Flow 85°F In,
CFM 95°F Out
Air
Cooled
Water
Cooled
1/6
1,050
----------
125
----------
1, 2
A
16
1/2” FPT 3/8” OD
1/6
1,560
----------
125
----------
1, 2
B
16
1/2” FPT 3/8” OD
1/4
2,420
----------
125
----------
1, 2
B
16
1” FPT
3/8” OD
1/4
3,316
----------
185
----------
1, 2
B
16
124
1” FPT
3/8” OD
1/2
6,000
----------
350
----------
1,2
B
16
Air
Air
125
156
1” FPT
3/8” OD
3/4
9,325
8,770
800
1.5
1, 2
B
16
Air or Water
F-150
150
175
1 1/2” FPT
1/2” FPT
1
9,325
8,900
800
1.7
1, 2, 4
D
16
A-200
200
240
2” MPT
1/2” FPT
1
9,500
8,900
800
1.7
1, 2, 4
D
4, 5,12, 13, 16
A-250
250
290
2” MPT
1/2” FPT
1-3/4
19,170
17,600
1125
2.7
2, 3, 4
E
4, 5, 12, 13, 16
A-300
300
350
2” MPT
1/2” FPT
1-3/4
19,170
17,600
1125
3.5
2, 3, 4
E
4,5, 12, 13, 16
3512
340
420
3” NPT
1/2” NPT 1-3/4
22,930
21,915
2000
4.4
2, 3, 4
F
1-7, 9, 12, 13, 15-17
Air or Water
3513
400
489
3” NPT
1/2” NPT
2
30,470
28,940
2000
5.8
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3514
500
600
3” NPT
1/2” NPT
3
43,625
41,720
2100
8.3
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3515
625
750
3” NPT
3/4” NPT
3
43,625
41,720
2100
8.3
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3516
750
900
3” NPT
3/4” NPT
4
57,170
54,925
4200
11
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3517
1000
1250
4” FLG
3/4” NPT 5-1/2
73,600
70,030
5000
14
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3518
1200
1500
4” FLG
3/4” NPT 5-1/2
80,500
77,280
5000
14.6
3, 4, 5
F
1-7, 9, 12, 13, 15-17
3519
1600
1920
6” FLG
3/4” NPT 7-1/2 114,510
109,345 5600
21.9
3, 4, 5
F
3521
2000
2400
6” FLG
3/4” NPT
10
139,407 5600
27.5
3, 4, 5
G
3548W
2300
2750
6” FLG
3/4” NPT
12
----------
30.2
3, 4, 5
3522
2500
3000
6” FLG
3/4” NPT
12
----------
3, 4, 5
3523
3000
3600
6” FLG
3/4” NPT
15
3549W
3000
3600
6” FLG
3/4” NPT
10
3524
3750
4500
6” FLG
3/4” NPT
15
3550W
4000
5000
6” FLG
3/4” NPT
15
3560W
5000
5750
8” FLG
3/4” NPT
20
4041W
5000
5750
8” FLG
3/4” NPT
25
4042W
6250
7200
8” FLG
3/4” NPT
25
4043W
7500
8625
8” FLG
3/4” NPT
35
4044W
10000 11500 10” FLG 3/4” NPT
40
4045W
12500 14375 12” FLG 3/4” NPT
50
4046W
15000 17250 12” FLG 3/4” NPT
60
35°F
50°F
F-05/10
10
12
3/8” OD 3/8” OD
F-10/20
20
25
F-30/40
40
50
F-50
50
62
F-70/100 100
F-125
2
2
2
2
Dimensions
(inches)
Cond.
Type
Optional
Instrum.
Height
Width
Length
13.5
13
15
13.5
16
16
27.5
13
14
14
20
18
22
22
30
27.5
Air or Water 27.5
Air or Water 42
Air or Water 42
Air or Water 42
20
20
29
29
29
30
30
38
38
38
44.5
44.5
44.5
38
38
38
42
42
42
Air or Water
59
59
72
72
38
38
38
38
50
50
50
50
1-7, 9, 12, 13, 15-17
Air or Water
87
38
50
1-7, 9-15
Air or Water
G
1-7, 10-14, 19
Water
H
2-7, 10, 11, 13, 14,19
Air
56
57
57
57
72
80
98
98
Air
Air
Air
2
194,263 169,008 11600
2
207,640
----------
11600
----------
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Air
91
98
98
98
2
----------
191,600
----------
38.3
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Water
98
57
2
266,120
----------
11600
----------
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Air
2
----------
255,240
----------
51
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Water
98
106
2
----------
281,250
----------
63
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Water
2
----------
313,000
----------
68
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
2
----------
373,000
----------
75
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
2
----------
468,000
----------
94
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
3
----------
565,000
----------
113
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
3
----------
713,000
----------
143
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
3
----------
878,000
----------
176
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
159,937
2
----------
158,604
Wt.
Lbs.
KW
Input5
50
58
78
.20
83
163
190
190
.48
.26
.40
.51
1.28
1.34
435
477
505
716
1.34
718
807
1136
1147
2.75
1500
1570
2117
3024
7.15
2.37
2.37
2.01
3.75
3.75
4.38
7.15
8.90
11.40
3400
8.70
14.56
98
4076
4538
3698
57
57
98
80
5000
5000
19.57
109
79
57
56
80
140
5000
5000
16.55
82
88
103
56
60
65
108
120
72
75
141 6500
140 7700
150 10000
150 13000
18.06
13.30
16.55
24.70
26.30
37.00
32.00
42.00
160 15500 57.00
High Temperature 3-in-1 Dryers
1
Flow Capacity
CFM at
160°F Saturated
Model
3528
3529
3530
3531
3532
3533
3534
3535
3536
Refrig.
Air Line
Comp.
Connect. Drain
H.P.
100 PSIG 140 PSIG In & Out Connect. Rating
21
30
50
70
105
135
36.8
56
81
130
187
220
300
400
280
365
480
21.9
1” NPT
1” NPT
1”
1”
2”
3”
3”
3”
NPT
NPT
NPT
NPT
NPT
NPT
3/8” OD
3/8” OD
3/8” OD
1/4
1/2
3/4
3/8” OD
1
1/2” NPT 1-3/4
1/2” NPT
2
1/2” NPT
3
3/4” NPT
4
3” NPT 3/4” NPT 5-1/2
Maximum
Heat
Rejection
BTU/Hr.
Air
Cooled
3900
6500
9900
16140
25500
32900
54000
65600
88000
Cool
Std.
Air
Flow Volt. Instrum.
CFM Code Panel
1, 2
1, 2
1, 2
800
1125 1, 2, 4
1125 2, 3, 4
2000 3, 4
2100 3, 4
4200 3, 4
185
350
5000
3, 4
Dimensions
(inches)
Optional
Instrum.
B
16
B
B
C
16
16
1, 16
C
K
K
K
K
1, 16
1, 16
Condense.
4
Type
Height Width Length
Air
Air
1-5, 7,8,10-14,16
Air
Air
Air
Air
Air
Air
1-5,7,8,10-14,16
Air or Water
1-5,7,8,10-14,16
NOTES:
1. All capacities above are based on design conditions of 100°F inlet, 100 psig, and 100°F ambient - except 3-in-1 dryers, which are based on
160°F inlet and 100°F ambient temperature.
2. Semi-hermetic compressor available on all “C” Series Cycling Dryers (Models 3514 thru 3522). Refer to X1022.
3. Single or Dual compressor offered or open drive.
4. Water regulating valve furnished with all water cooled units.
5. KW figures for water cooled models are 15% less than figures shown. Figures include total electric draw under maximum load, including
fan motors, indicators, etc.
• Dryers rating 250 psi max. working pressure; std. drain trap rated for 250 psi max. up to A-300, 200 psi and larger sizes.
• On models F-70/100 and larger, an electronic drain (model 5702S) may be substituted for the std. float type drain for an additional charge.
This must be noted on your P.O.
-7-
Wt.
Lbs.
KW
5
Input
.40
.51
27.5
20
30
141
27.5
27.5
31.5
20
20
27.5
30
30
34
158
200
288
42
49.5
49.5
63.5
63.5
29.5
38.5
38.5
38.5
38.5
40
44
44
52
52
508
698
768
1113
1190
1.28
1.73
2.01
2.75
4.38
5.75
7.15
VOLTAGE CODE
Standard
Export
1
2
3
4
5
-
115/1/60
208-230/1/60
208-230/3/60
460/3/60
575/3/60
100/1/50
200-240/1/50
200-240/3/50
380/3/50
Air Flow Ratings of ARROW Dryers
STANDARD INSTRUMENT PANEL
A B
C
D
E
F
G
H
I
J
K
Air dryer rated flows are based upon design conditions
of 100°F inlet, 100 psig, 100°F ambient. If these conditions vary, the rated flows will vary in accordance
with the following general rules and tables.
On/Off Switch
Power On Light
Compressor On Light
Air Inlet Temp. Gauge
Air Inlet Pressure Gauge
Air Outlet Pressure Gauge
High Temperature Light
1) As Inlet Air Temperature increases, Flow Capacity will decrease:
Air Dew Point Temp. Gauge
Digital Temp. Display*
Inlet Air Temperature
90°F
95°F
100°F 110°F 120°F
Differential Pressure Gauge
Flow Capacity Multiplier:
1.23
1.13
1.00
Refrigerant Suction
Pressure Gauge
0.83
0.69
2) As Air Line Pressure increases, Flow Capacity will increase:
Refrigerant Discharge
Pressure Gauge
Air Line Pressure:
Refrigerant Temp. Gauge
Flow Capacity Multiplier:
Hi/Low Refrigerant
Pressure Light
60 psig 80psig 100 psig120 psig 150 psig
.88
.95
1.00
1.04
1.08
3) As Ambient Air Temperature increases, Flow Capacity will decrease:
Low Oil Pressure Light
Ambient Air Temperature
80°F
90°F
100°F
110°F
Cooling Water Temp.
Gauges (In & Out)
Flow Capacity Multiplier:
1.14
1.07
1.00
.92
4) As the Dew Point increases, Flow Capacity will increase:
If design conditions (100°F, 100 psig, 100°F ambient) remain the
same, but a higher dew point is acceptable, the Flow Capacity will
increase approximately in accordance with the following multipliers:
Evaporator Pressure Gauge
NEMA 12 Enclosure
* Digital panel displays ambient air temp., compressor suction temp.,
compressor discharge temp., and inlet air temp.
Notes:
1) Second gauge on models 4042W and 4043W is an
evaporator pressure gauge when an evaporator pressure
valve is used.
2) Electric Power Cords - 6 ft. electrical cord with grounded plug
is standard on all F-10/20 thru F-70/100 115V units.
OPTIONAL INSTRUMENTATION
AND FEATURES
1) Power On Light
2) High Inlet Air Temperature Light
3) High Refrigerant Discharge Pressure Light
4) Low Ambient Fan Cut-Out Switch
5) Dead System Shutdown Light
6) Condensate Drain Alarm
7) Air Outlet Temperature Gauge
8) Refrigerant Discharge Pressure Gauge
9) Cooling Water Temperature In/Out
10) Air Dew Point Temperature
11) Air Flow Gauge
12) NEMA 12 or NEMA 13 Enclosures
13) Waterproof Enclosure with NEMA 4 Wiring
14) Fused Disconnect Switch
15) High Pressure Package
16) Electric Drain
17) Air Outlet Pressure
18) Refrigerant Temperature
19) Capacity Pressure Unloaders
Dew Point
39°F
45°F
50°F
Flow Capacity Multiplier:
1.05
1.15
1.20
These figures are simply general rules, multipliers, and formulas to help
you select a dryer; however, they do not apply to 3-in-1 dryers.
MOISTURE REMOVAL DATA
TEMP. AT
RECEIVER TANK
120
100
90
80
SYSTEM
TEMP.
70
70
70
70
LBS. CONDENSED
PER 100 CFM
.05613
.02455
.01399
.005965
LBS.PER
8 HR. SHIFT
26.94
11.78
6.718
2.863
GALLONS
PER 8 HR. SHIFT
3.23
1.41
.81
.34
120
100
90
80
50
50
50
50
.06386
.03227
.02172
.01369
30.65
15.49
10.43
6.571
3.67
1.86
1.25
.79
120
100
90
80
35
35
35
35
.06714
.03556
.02501
.01698
32.23
17.07
12.00
8.149
3.86
2.05
1.44
.98
NOTE: 8.3453 LBS. PER GALLON
-8-
INSTRUMENTATION
3 Gauge Instrument Panel Includes:* Refrigerant Suction
Pressure Gauge, Air Inlet Pressure Gauge, Air Inlet Temperature
Gauge and Power Indicator Light.
*Standard on models F-150 & A-200
Optional Instrumentation: Low Ambient Cut Out and Dead System
Shutdown Light. (A-200 Only)
3 Gauge Instrument Panel with Digital Display Includes:*
Refrigerant Suction Pressure Gauge, Inlet Air Pressure Gauge,
Efficiency Pressure Gauge and Power On/Off Switch. Digital
Temperature Display Provides: Ambient, Compressor Suction,
Compressor Discharge and Inlet Air Temperatures
*Standard on models A250 & A-300
Optional Instrumentation: Low Ambient Cut Out and Dead System
Shutdown Light
4 Gauge Instrument Panel with Digital Display Includes:*
Refrigerant Discharge Pressure Gauge,
Refrigerant Suction Pressure Gauge, Inlet Air Pressure Gauge,
Efficiency Pressure Gauge and Power On/Off Switch. Digital
Temperature Display Provides: Ambient, Compressor Suction,
Compressor Discharge and Inlet Air Temperatures
*Standard on models 3512 through 3519
Optional Temperature Readouts Include: Air Outlet
Temperature, Refrigerant Temperature and Cooling Water In/Out
Optional Gauges Include: Air Outlet Pressure Gauge
Instrumentation Panel for High Capacity Dryers
Includes*: Refrigerant Suction Pressure Gauge, Air Inlet Pressure
Gauge, Air Outlet Pressure Gauge, Air Inlet Temperature Gauge,
Refrigerant Temperature, and Refrigerant Discharge Pressure Gauge.
*Standard on models 3548W through 4046W
Optional Instrumentation: Air Outlet Temperature, Air Dew Point
Temperature, Air Flow Gauge, Cooling Water Temperature In/Out,
High Inlet Air Temperature Light, High Discharge Pressure Light, Low Oil
Pressure Light, Low Ambient Cut Out, Dead System Shutdown Light and
Condensate Drain Alarm
-9-
WARRANTY
Arrow refrigerated type compressed air dryers are warranted to be free
from defects in material and workmanship, when used under conditions
recommended by the manufacturer, for a period of twelve (12) months from
the date of start-up not to exceed eighteen (18) months from date shipped
from factory. Products purchased from warehouse stock are warranted for
a period of twelve (12) months from date of shipment from that warehouse provided Arrow is furnished full name, address and date of shipment
information.
The patented modular heat exchanger used on models A-200 through 3560
is warranted for five (5) years. This warranty is limited to the replacement
of the heat exchanger, F.O.B. factory, and is subject to the same restrictions
as outlined below concerning misuse, abuse or accident.
This warranty applies to equipment installed, operated and maintained in
accordance with the procedures and recommendations as outlined in the
owner’s manual published by Arrow Pneumatics.
The electric drain trap is warranted to be free from mechanical defects for a
period of ninety (90) days.
Air cooled aftercoolers, watercooled aftercoolers and moisture separators
are warranted to be free from defects in material and workmanship, when
used under conditions recommended by the manufacturer, for a period of
twelve (12) months from the date of shipment from the factory or regional
warehouse.
During the period of this warranty, Arrow Pneumatics will repair or replace
(at Arrow’s option), free of charge, F.O.B. its plant, any defective part or
assembly, if such defect occurred in normal service and was not due to
apparent misuse, abuse or accident.
Before any warranty service work is started, it must first be authorized by
Arrow Pneumatics. Please contact our Warranty Department at
(847) 540-2133. Unauthorized service voids the warranty and any
resulting charges will not be reimbursed by Arrow Pneumatics.
The foregoing warranty is exclusive and in lieu of all other warranties,
written, oral or implied, and the company makes no warranty of merchantibility or fitness for any particular purpose or use. In no event shall the
company be liable for special, incidental or consequential damages or losses arising out of or caused by products which may prove to be defective,
including, but not limited to loss of revenues and loss of profits.
- 10 -
A R R O W
P N E U M A T I C S
Your Local Distributor
Arrow Pneumatics, Inc.
500 North Oakwood Road
Lake Zurich, Illinois 60047
Voice:
Fax:
Internet:
(847) 438-9100
(847) 438-7110
www.arrowpneumatics.com
X1020A
Refrigerated
Dry Air Technology
b y
A r r o w
Quality Air Preparation Equipment
P n e u m a t i c s
STEP 1
STEP 4
Hot, moist air from the air
compressor enters the heat
exchanger where it is cooled.
Air is now sent back to the airto-air heat exchanger where it
is reheated for plant use.
STEP 2
Air now moves from the
air-to-air heat exchanger
to the refrigerant-to-air
heat exchanger where it
is cooled to 35ºF.
Hot Gas Bypass System
Controls refrigerant suction pressure in
refrigerant - to - air heat exchanger. This
allows trouble-free operation under zero
load without danger of freeze-up.
Instruments
Full instrumentation
permits complete monitoring
of dryer operation under all
operating conditions.
Suction Line Accumulator
Included on all units 1/2 h.p. and larger; protects
compressor under varying loads by preventing
liquid refrigerant from returning to refrigerant
compressor, which could cause damage.
STEP 3
Chilled air now enters
the separator where the
moisture is separated
from the incoming air.
The air is now at 35ºF
dew point
Modular
Construction
Main heat exchangers 100% copper
tubing, an air-to-air and a refrigerantto-air, are made up of a stack of individual coils with a common header at
each end. Each double tube coil is
individually fed by a refrigerant line
from the expansion valve to eliminate
hot spots and insure the most efficient
cooling of air in the inner tube.
Heavy Duty Automatic Drain
Trouble-free, heavy-duty steel, ball float
type, is externally mounted for easy
monitoring and service.
Refrigerant Feeder
Assembly
Refrigerant is metered in equal
amounts to each coil so refrigerant is
evenly spread throughout the entire
heat exchanger system. Utilizes quick
response expansion valves instead of
cheaper capillary tubes.
-1-
Controls
Highest quality controls are used
throughout:
• Oil pressure safety switch
protects compressor in case of
low oil pressure.
• Water regulating valve,
standard on water cooled units,
conserves water usage.
• Low pressure and high pressure
cutout switches protect
refrigerator system from unsafe
operating conditions.
Arrow’s Exclusive
Spiral Fin Heat Exchanger
Arrow spiral fin tubing acts as a cold mechanical separator.
sThe fins create turbulent flow and rotate the moisture laden air as
it passes through the tubing. The turbulent flow and centrifugal
forces generated cause the moisture and fog to condense rapidly
and completely into water droplets. These droplets are trapped in
the grooves between the fins and are easily removed by a
mechanical separator.
. . .Versus Smooth Tube Heat Exchanger
By contrast, smooth tubing does not effectively tumble the air to
cause all the molecules to come into contact with the cold tubing.
Additionally, laminar flow does not permit effective condensation,
and much of the condensate leaves the tube in the form of fog. A
mechanical separator will not remove this fog and it is passed into
the air stream in the form of a much higher dew point.
New! Braze Plate Design
New Arrow brazed plate heat exchangers in our “F-Series” dryers, Models F-10/20 thru
F-150, provide turbulent flow, high heat transfer coefficients, lower pressure drops, in a
compact size. These heat exchangers are made up of corrugated “herringbone” patterned AISI
316 type stainless steel channel plates. These plates are brazed together by using 99.9% pure
copper, at all contact points and creates a completely hermetically sealed unit.. They are helium
leak tested for internal and external leaks down to a volumetric equivalent to less than
2.8 grams of R-22 refrigerant per year. Arrow Pneumatics has incorporated this design in the
new “F-Series” line of dryers. Our goals are to provide you with quality products adding higher
efficiencies, reduced cabinet sizes, simplified installations and lower shipping costs
Automatic Pump-Down System
Runs for a short period after dryer is shut down to pump
accumulated refrigerant from low pressure side of refrigerant
system. Standard on all larger units. This prevents liquid
refrigerant from migrating back to the compressor during shutdown, which could cause any refrigerant compressor to fail.
Crankcase Heater
Standard on 1-1/2 hp. and larger units. Keeps liquid
refrigerant from contaminating compressor lubricating
oil by heating refrigerant above evaporation point.
Further protection for your system.
Semi-Hermetic Compressor
Semi-hermetic compressors are standard on 500 CFM to 2,500
CFM “C” series cycling dryers, as well as all units 3,000 cfm and
above. These refrigerant compressors are more efficient and have a
longer life than hermetic compressors.
They provide substantial energy
savings at less than full-load
conditions.
-2-
ARROW PNEUMATICS
Manufactures a wide range of environmentally-friendly, CFC-free refrigerant air dryers to accommodate flows
from 5 scfm to 15,000 scfm to meet your compressed air system needs.
F-05/10 thru F-30/40
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Entire Heat Exchanger Thermally Insulated
Stainless Steel Heat Exchanger
Built-in 40 Micron Particulate Filter
R-134A Refrigerant
Compressor Thermal Overload
Mechanical Moisture Separator with Automatic
Float Type Drain @ 99.97% Efficiency
• Constant Pressure Expansion Valve
• Refrigerant Suction Pressure Gauge*
*F-10/20 & F-30/40
• Electrical Cord with Grounded Plug
(115 volt units only)
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
F-50
•
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Entire Heat Exchanger Thermally Insulated
Stainless Steel Heat Exchanger
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
R-134A Refrigerant
Compressor Thermal Overload
Mechanical Moisture Separator
with Zero Air Loss Demand Drain
• Thermal Expansion Valve
• Refrigerant Suction Pressure Gauge
• 6 ft. Electrical Cord with Grounded
Plug (115 volt units only)
• Hot Gas Bypass System
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
F-70/100 & F-125
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Entire Heat Exchanger Thermally Insulated
Stainless Steel Heat Exchanger
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
Compressor Thermal Overload
Mechanical Moisture Separator
with zero air loss demand drain
• Thermostatic Expansion Valve
• Refrigerant Suction Pressure Gauge
• 6 ft. Electrical Cord with Grounded Plug
(115 volt units only)
• Suction Line Accumulator
• R-22 Refrigerant
• Air or Water Cooled Condensers*
*F125 Only
• Hot Gas Bypass System
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
F-150
• Pressure Dew Point as low as 35°F
• Entire Heat Exchanger Thermally Insulated
• Stainless Steel Heat Exchanger
• Built--in 90 Micron Particulate Filter
• Power Light On/Off Switch
• Compressor Thermal Overload
• Corrosion Resistant Coalescing Separator with 2
stage Separation and Zero Loss Demand Drain
• Thermostatic Expansion Valve
• Refrigerant Suction Pressure Gauge
-3-
• Air Inlet Temperature Gauge
• Air Inlet Pressure Gauge
• Max Operating Pressure Rated at 250 psi
• Suction Line Accumulator
• R-22 Refrigerant
• Hot Gas Bypass System
• Air or Water Cooled Condensers
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
Low dew point protection prevents frosting or freeze-up, and makes Arrow Pneumatics refrigerant air dryers the most requested
in the industry.
A-200
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Spiral Fin Tubing
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
R-22 Refrigerant
Mechanical Moisture Separator
with Zero Air Loss Demand Drain
• Thermostatic Expansion Valve
• Hot Gas Bypass System
• Suction Line Accumulator
•
•
•
•
•
•
•
•
•
Refrigerant Sight Glass
Refrigerant Filter-Dryer
Air or Water Cooled Condensers
Air Inlet Temperature Gauge
Refrigerant Suction Pressure Gauge
Air Inlet Pressure Gauge
One Year Warranty
Max. Operating Pressure Rated @ 250 psi
Five Year Heat Exchanger Warranty
A-250 & A-300
•
•
•
•
•
•
•
•
•
•
Pressure Dew Point as low as 35°F
Spiral Fin Tubing
Built-in 40 Micron Particulate Filter
Power Light On/Off Switch
R-22 Refrigerant
Mechanical Moisture Separator
with Zero Air Loss Demand Drain
Thermostatic Expansion Valve
Hot Gas Bypass System
Suction Line Accumulator
Refrigerant Sight Glass
•
•
•
•
•
•
•
Refrigerant Filter-Dryer
Air or Water Cooled Condensers
Refrigerant Suction Pressure Gauge
Air Inlet Temperature Gauge
Air Inlet Pressure Gauge
Digital Display Panel
Low Refrigerant Pressure
Safety Switch
• Max. Operating Pressure Rated @ 250 psi
• One Year Warranty
• Five Year Heat Exchanger Warranty
Models 3512 thru 3519
• “C” Series Cycling Dryers Available
• Produce 340 to 1600 SCFM of Air
with a Pressure Dew Point as low as 35°F
• Spiral Fin Tubing
• Heavy-duty Automatic Drain Standard
• Mechanical Water Separator
• Refrigerant Filter Standard
• Digital Panel Display
• Quick Response Expansion Valve S tandard
-4-
• Hot Gas Bypass Valve Standard
• Crankcase Heater Standard
• Automatic Pump-down System
Standard on 3514 and up
• Suction Line Accumulator Standard
• Water Regulating Valve Standard on Water
Cooled Units
• One Year Warranty
• Five Year Heat Exchanger Warranty
3500 Series Continued and High Temperature 3-in-1 Dryers
Models 3521 thru 3560W
• “C” Series Cycling Dryers Available
• Produce 2,000 scfm to 5,000 scfm
of Air with a 35°F Pressure Dew Point at 100 psig
• NEMA 12 Electrical Enclosure
Standard (3523 and larger)
• Full Instrumentation to Monitor Performance
• Energy Savings up to 56% Available with Optional
Cylinder Uploaders
• Spiral Fin Tubing
• Heavy-duty Automatic Drain
• Mechanical Water Separator
•
•
•
•
•
•
•
Refrigerant Filter
Quick Response Expansion Valve
Hot Gas Bypass System
Suction Line Accumulator
Crankcase Heater
Automatic Pump-down System
Water Regulating Valve Standard on
Water Cooled Units
• Unsafe Condition Indicator Lights
• Five Year Heat Exchanger Warranty
Models 4041W thru 4046W
• Produce 5,000 scfm to 15,000 scfm
of Air with a 39°F Pressure Dew
Point at 100 psig
• 25 h.p. to 60 h.p. Motor, Carlyle
Semi Hermetic Compressor
• High Efficiency Motor and Starter
• Fused Disconnect Switch Standard
• NEMA 12 Electrical Enclosure
• Full Instrumentation to Monitor
Performance
• Power Factor Correction Equipment
Available
• Full Safety Controls with Everload
Protection for Compressor and Motor
• Unsafe Condition Shutdowns
• Energy Savings Up to 56% Available
with Optional Cylinder Unloaders
High Temperature 3-in-1 Air Dryers
• Flow Capacity Range 21- 400 SCFM
• 3-in-1 Design Eliminates the Need for
an Aftercooler, Separator and Drain
Trap Before the Air Dryer
• Pressure Dew Point as Low as 35°F
• Handles Inlet Air Temperature
Up to 180°F
• All Copper Spiral Fin Tube-In-Tube
Heat Exchanger Provides Maximum
Efficiency for Heat Transfer and
Moisture Separation
• Includes Monitoring Instrumentation,
Separator and DrainTrap
• 6 ft. Electrical Cord with Grounded Plug on
Models 3528 - 3531 with 115 volts
• Refrigeration Systems Utilize
Environmentally Safe R-134A
Refrigerant or R-22 Refrigerant
• Refrigerant Suction Pressure Gauge
• One Year Warranty
• Five Year Heat Exchanger Warranty
Note: 3528 – 3531 Max. Operating Pressure Rated@ 250 psi
-5-
Arrow Pneumatics refrigerant air dryers are energy efficient, with air-to-air and refrigerant-to-air heat exchangers to reduce energy consumption. Our “C” series cycling dryers are now available on 500 CFM and above units by using semi-hermetic compressors and
head unloaders.
“C” SERIES CYCLING DRYER
Arrow Model Numbers 3514C through 3560C
• Significant Energy Savings
• Longer Compressor Life Because of
Reduced Cycling Wear
•More BTU’s/HR Capacity per KW with
Semi-Hermetic Compressor
•No Dew Point Spikes which are Typical
with Other Types of Cycling Dryers
• Semi-hermetic Compressors have a
Three Times Longer Life than
Hermetic Compressors
•Superior Heat Exchanger Design with
Spiral Fin Tube Construction
Semi-Hermetic Compressor Performance
R-22 Refrigerant
Model
Flow
Energy
# of
Energy
1st Step
2nd Step
In/Outlet
Capacity
Step
Full Load
Savings Unloader KW Savings
Cylinders HP Connections Unloaders
Unloader
KW
SCFM
KW
3514-*C
3514W-*C
500
500
4
4
3
3
3” NPT
3” NPT
1 Step
1 Step
4.07
3.20
2.32
1.82
43%
43%
N/A
N/A
3515-*C
3515W-*C
625
625
4
4
3
3
3” NPT
3” NPT
1 Step
1 Step
4.07
3.20
2.32
1.82
43%
43%
N/A
N/A
3516-*C
3516W-*C
750
750
4
4
5
5
3” NPT
3” NPT
1 Step
1 Step
5.04
4.17
2.87
2.38
43%
43%
N/A
N/A
3517-*C
3517W-*C
1000
1000
4
4
5
5
4” FLG
4” FLG
1 Step
1 Step
6.51
5.25
3.71
2.99
43%
43%
N/A
N/A
3518-*C
3518W-*C
3519-*C
3519W-*C
1200
1200
4
4
6
6
6
6
5
5
6.5
6.5
10
10
4”
4”
6”
6”
6”
6”
1
1
2
2
2
2
Step
Step
Step
Step
Step
Step
7.13
5.87
9.37
8.11
14.56
13.30
4.06
3.35
43%
43%
28%
28%
28%
28%
N/A
N/A
4.12
3.57
6
6
4
10
10
15
6” FLG
6” FLG
6” FLG
2 Step
2 Step
1 Step
13.30
14.81
18.06
6
4
6
4
6
10
15
25
15
25
6”
6”
6”
6”
8”
2
1
2
1
2
Step
Step
Step
Step
Step
13.30
19.57
18.90
16.55
27.02
4
20
8” FLG
1 Step
16.55
3521-*C
3521W-*C
3548W-*C
3522-*C
3523-*C
3549W-*C
3524-*C
3550-*C
3550W-*C
3560-*C
3560W-*C
1600
1600
2000
2000
2300
2500
3000
3000
3750
4000
4000
5000
5000
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
FLG
All capacities above are based on design conditions of 100°F inlet, 100 PSIG and 100°F ambient.
-6-
6.75
5.84
10.48
9.58
9.58
10.48
10.29
9.58
11.10
14.45
9.43
20.93
9.43
28%
28%
43%
28%
43%
28%
43%
28%
43%
6.41
5.85
5.85
56%
56%
56%
56%
6.41
N/A
5.85
N/A
10.00
56%
56%
0%
56%
0%
56%
N/A
14.55
N/A
0%
56%
0%
* Voltage Codes
-3 - 208/3/60 or 200-240/3/50
-4 - 460/3/60 or 380/3/50
-5 - 575/3/60
Model
Maximum
Heat
Rejection
BTU/Hr.
Flow
Air Line
Drain Refrig.
Capacity at Listed
Conn.
Connect. Comp.
Dew Point SCFM In & Out
H.P.
Rating
Max.
Std.
Cool
Volt.
Water
Air
Code Instrum.
Flow GPM
Panel
Flow 85°F In,
CFM 95°F Out
Air
Cooled
Water
Cooled
1/6
1,050
----------
125
----------
1, 2
A
16
1/2” FPT 3/8” OD
1/6
1,560
----------
125
----------
1, 2
B
16
1/2” FPT 3/8” OD
1/4
2,420
----------
125
----------
1, 2
B
16
1” FPT
3/8” OD
1/4
3,316
----------
185
----------
1, 2
B
16
124
1” FPT
3/8” OD
1/2
6,000
----------
350
----------
1,2
B
16
Air
Air
125
156
1” FPT
3/8” OD
3/4
9,325
8,770
800
1.5
1, 2
B
16
Air or Water
F-150
150
175
1 1/2” FPT
1/2” FPT
1
9,325
8,900
800
1.7
1, 2, 4
D
16
A-200
200
240
2” MPT
1/2” FPT
1
9,500
8,900
800
1.7
1, 2, 4
D
4, 5,12, 13, 16
A-250
250
290
2” MPT
1/2” FPT
1-3/4
19,170
17,600
1125
2.7
2, 3, 4
E
4, 5, 12, 13, 16
A-300
300
350
2” MPT
1/2” FPT
1-3/4
19,170
17,600
1125
3.5
2, 3, 4
E
4,5, 12, 13, 16
3512
340
420
3” NPT
1/2” NPT 1-3/4
22,930
21,915
2000
4.4
2, 3, 4
F
1-7, 9, 12, 13, 15-17
Air or Water
3513
400
489
3” NPT
1/2” NPT
2
30,470
28,940
2000
5.8
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3514
500
600
3” NPT
1/2” NPT
3
43,625
41,720
2100
8.3
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3515
625
750
3” NPT
3/4” NPT
3
43,625
41,720
2100
8.3
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3516
750
900
3” NPT
3/4” NPT
4
57,170
54,925
4200
11
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3517
1000
1250
4” FLG
3/4” NPT 5-1/2
73,600
70,030
5000
14
3, 4, 5
F
1-7, 9, 12, 13, 15-17
Air or Water
3518
1200
1500
4” FLG
3/4” NPT 5-1/2
80,500
77,280
5000
14.6
3, 4, 5
F
1-7, 9, 12, 13, 15-17
3519
1600
1920
6” FLG
3/4” NPT 7-1/2 114,510
109,345 5600
21.9
3, 4, 5
F
3521
2000
2400
6” FLG
3/4” NPT
10
139,407 5600
27.5
3, 4, 5
G
3548W
2300
2750
6” FLG
3/4” NPT
12
----------
30.2
3, 4, 5
3522
2500
3000
6” FLG
3/4” NPT
12
----------
3, 4, 5
3523
3000
3600
6” FLG
3/4” NPT
15
3549W
3000
3600
6” FLG
3/4” NPT
10
3524
3750
4500
6” FLG
3/4” NPT
15
3550W
4000
5000
6” FLG
3/4” NPT
15
3560W
5000
5750
8” FLG
3/4” NPT
20
4041W
5000
5750
8” FLG
3/4” NPT
25
4042W
6250
7200
8” FLG
3/4” NPT
25
4043W
7500
8625
8” FLG
3/4” NPT
35
4044W
10000 11500 10” FLG 3/4” NPT
40
4045W
12500 14375 12” FLG 3/4” NPT
50
4046W
15000 17250 12” FLG 3/4” NPT
60
35°F
50°F
F-05/10
10
12
3/8” OD 3/8” OD
F-10/20
20
25
F-30/40
40
50
F-50
50
62
F-70/100 100
F-125
2
2
2
2
Dimensions
(inches)
Cond.
Type
Optional
Instrum.
Height
Width
Length
13.5
13
15
13.5
16
16
27.5
13
14
14
20
18
22
22
30
27.5
Air or Water 27.5
Air or Water 42
Air or Water 42
Air or Water 42
20
20
29
29
29
30
30
38
38
38
44.5
44.5
44.5
38
38
38
42
42
42
Air or Water
59
59
72
72
38
38
38
38
50
50
50
50
1-7, 9, 12, 13, 15-17
Air or Water
87
38
50
1-7, 9-15
Air or Water
G
1-7, 10-14, 19
Water
H
2-7, 10, 11, 13, 14,19
Air
56
57
57
57
72
80
98
98
Air
Air
Air
2
194,263 169,008 11600
2
207,640
----------
11600
----------
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Air
91
98
98
98
2
----------
191,600
----------
38.3
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Water
98
57
2
266,120
----------
11600
----------
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Air
2
----------
255,240
----------
51
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Water
98
106
2
----------
281,250
----------
63
3, 4, 5
H
2-7, 10, 11, 13, 14,19
Water
2
----------
313,000
----------
68
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
2
----------
373,000
----------
75
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
2
----------
468,000
----------
94
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
3
----------
565,000
----------
113
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
3
----------
713,000
----------
143
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
3
----------
878,000
----------
176
3, 4, 5
J
2-5, 7,10,11, 13, 14, 19
Water
159,937
2
----------
158,604
Wt.
Lbs.
KW
Input5
50
58
78
.20
83
163
190
190
.48
.26
.40
.51
1.28
1.34
435
477
505
716
1.34
718
807
1136
1147
2.75
1500
1570
2117
3024
7.15
2.37
2.37
2.01
3.75
3.75
4.38
7.15
8.90
11.40
3400
8.70
14.56
98
4076
4538
3698
57
57
98
80
5000
5000
19.57
109
79
57
56
80
140
5000
5000
16.55
82
88
103
56
60
65
108
120
72
75
141 6500
140 7700
150 10000
150 13000
18.06
13.30
16.55
24.70
26.30
37.00
32.00
42.00
160 15500 57.00
High Temperature 3-in-1 Dryers
1
Flow Capacity
CFM at
160°F Saturated
Model
3528
3529
3530
3531
3532
3533
3534
3535
3536
Refrig.
Air Line
Comp.
Connect. Drain
H.P.
100 PSIG 140 PSIG In & Out Connect. Rating
21
30
50
70
105
135
36.8
56
81
130
187
220
300
400
280
365
480
21.9
1” NPT
1” NPT
1”
1”
2”
3”
3”
3”
NPT
NPT
NPT
NPT
NPT
NPT
3/8” OD
3/8” OD
3/8” OD
1/4
1/2
3/4
3/8” OD
1
1/2” NPT 1-3/4
1/2” NPT
2
1/2” NPT
3
3/4” NPT
4
3” NPT 3/4” NPT 5-1/2
Maximum
Heat
Rejection
BTU/Hr.
Air
Cooled
3900
6500
9900
16140
25500
32900
54000
65600
88000
Cool
Std.
Air
Flow Volt. Instrum.
CFM Code Panel
1, 2
1, 2
1, 2
800
1125 1, 2, 4
1125 2, 3, 4
2000 3, 4
2100 3, 4
4200 3, 4
185
350
5000
3, 4
Dimensions
(inches)
Optional
Instrum.
B
16
B
B
C
16
16
1, 16
C
K
K
K
K
1, 16
1, 16
Condense.
4
Type
Height Width Length
Air
Air
1-5, 7,8,10-14,16
Air
Air
Air
Air
Air
Air
1-5,7,8,10-14,16
Air or Water
1-5,7,8,10-14,16
NOTES:
1. All capacities above are based on design conditions of 100°F inlet, 100 psig, and 100°F ambient - except 3-in-1 dryers, which are based on
160°F inlet and 100°F ambient temperature.
2. Semi-hermetic compressor available on all “C” Series Cycling Dryers (Models 3514 thru 3522). Refer to X1022.
3. Single or Dual compressor offered or open drive.
4. Water regulating valve furnished with all water cooled units.
5. KW figures for water cooled models are 15% less than figures shown. Figures include total electric draw under maximum load, including
fan motors, indicators, etc.
• Dryers rating 250 psi max. working pressure; std. drain trap rated for 250 psi max. up to A-300, 200 psi and larger sizes.
• On models F-70/100 and larger, an electronic drain (model 5702S) may be substituted for the std. float type drain for an additional charge.
This must be noted on your P.O.
-7-
Wt.
Lbs.
KW
5
Input
.40
.51
27.5
20
30
141
27.5
27.5
31.5
20
20
27.5
30
30
34
158
200
288
42
49.5
49.5
63.5
63.5
29.5
38.5
38.5
38.5
38.5
40
44
44
52
52
508
698
768
1113
1190
1.28
1.73
2.01
2.75
4.38
5.75
7.15
VOLTAGE CODE
Standard
Export
1
2
3
4
5
-
115/1/60
208-230/1/60
208-230/3/60
460/3/60
575/3/60
100/1/50
200-240/1/50
200-240/3/50
380/3/50
Air Flow Ratings of ARROW Dryers
STANDARD INSTRUMENT PANEL
A B
C
D
E
F
G
H
I
J
K
Air dryer rated flows are based upon design conditions
of 100°F inlet, 100 psig, 100°F ambient. If these conditions vary, the rated flows will vary in accordance
with the following general rules and tables.
On/Off Switch
Power On Light
Compressor On Light
Air Inlet Temp. Gauge
Air Inlet Pressure Gauge
Air Outlet Pressure Gauge
High Temperature Light
1) As Inlet Air Temperature increases, Flow Capacity will decrease:
Air Dew Point Temp. Gauge
Digital Temp. Display*
Inlet Air Temperature
90°F
95°F
100°F 110°F 120°F
Differential Pressure Gauge
Flow Capacity Multiplier:
1.23
1.13
1.00
Refrigerant Suction
Pressure Gauge
0.83
0.69
2) As Air Line Pressure increases, Flow Capacity will increase:
Refrigerant Discharge
Pressure Gauge
Air Line Pressure:
Refrigerant Temp. Gauge
Flow Capacity Multiplier:
Hi/Low Refrigerant
Pressure Light
60 psig 80psig 100 psig120 psig 150 psig
.88
.95
1.00
1.04
1.08
3) As Ambient Air Temperature increases, Flow Capacity will decrease:
Low Oil Pressure Light
Ambient Air Temperature
80°F
90°F
100°F
110°F
Cooling Water Temp.
Gauges (In & Out)
Flow Capacity Multiplier:
1.14
1.07
1.00
.92
4) As the Dew Point increases, Flow Capacity will increase:
If design conditions (100°F, 100 psig, 100°F ambient) remain the
same, but a higher dew point is acceptable, the Flow Capacity will
increase approximately in accordance with the following multipliers:
Evaporator Pressure Gauge
NEMA 12 Enclosure
* Digital panel displays ambient air temp., compressor suction temp.,
compressor discharge temp., and inlet air temp.
Notes:
1) Second gauge on models 4042W and 4043W is an
evaporator pressure gauge when an evaporator pressure
valve is used.
2) Electric Power Cords - 6 ft. electrical cord with grounded plug
is standard on all F-10/20 thru F-70/100 115V units.
OPTIONAL INSTRUMENTATION
AND FEATURES
1) Power On Light
2) High Inlet Air Temperature Light
3) High Refrigerant Discharge Pressure Light
4) Low Ambient Fan Cut-Out Switch
5) Dead System Shutdown Light
6) Condensate Drain Alarm
7) Air Outlet Temperature Gauge
8) Refrigerant Discharge Pressure Gauge
9) Cooling Water Temperature In/Out
10) Air Dew Point Temperature
11) Air Flow Gauge
12) NEMA 12 or NEMA 13 Enclosures
13) Waterproof Enclosure with NEMA 4 Wiring
14) Fused Disconnect Switch
15) High Pressure Package
16) Electric Drain
17) Air Outlet Pressure
18) Refrigerant Temperature
19) Capacity Pressure Unloaders
Dew Point
39°F
45°F
50°F
Flow Capacity Multiplier:
1.05
1.15
1.20
These figures are simply general rules, multipliers, and formulas to help
you select a dryer; however, they do not apply to 3-in-1 dryers.
MOISTURE REMOVAL DATA
TEMP. AT
RECEIVER TANK
120
100
90
80
SYSTEM
TEMP.
70
70
70
70
LBS. CONDENSED
PER 100 CFM
.05613
.02455
.01399
.005965
LBS.PER
8 HR. SHIFT
26.94
11.78
6.718
2.863
GALLONS
PER 8 HR. SHIFT
3.23
1.41
.81
.34
120
100
90
80
50
50
50
50
.06386
.03227
.02172
.01369
30.65
15.49
10.43
6.571
3.67
1.86
1.25
.79
120
100
90
80
35
35
35
35
.06714
.03556
.02501
.01698
32.23
17.07
12.00
8.149
3.86
2.05
1.44
.98
NOTE: 8.3453 LBS. PER GALLON
-8-
INSTRUMENTATION
3 Gauge Instrument Panel Includes:* Refrigerant Suction
Pressure Gauge, Air Inlet Pressure Gauge, Air Inlet Temperature
Gauge and Power Indicator Light.
*Standard on models F-150 & A-200
Optional Instrumentation: Low Ambient Cut Out and Dead System
Shutdown Light. (A-200 Only)
3 Gauge Instrument Panel with Digital Display Includes:*
Refrigerant Suction Pressure Gauge, Inlet Air Pressure Gauge,
Efficiency Pressure Gauge and Power On/Off Switch. Digital
Temperature Display Provides: Ambient, Compressor Suction,
Compressor Discharge and Inlet Air Temperatures
*Standard on models A250 & A-300
Optional Instrumentation: Low Ambient Cut Out and Dead System
Shutdown Light
4 Gauge Instrument Panel with Digital Display Includes:*
Refrigerant Discharge Pressure Gauge,
Refrigerant Suction Pressure Gauge, Inlet Air Pressure Gauge,
Efficiency Pressure Gauge and Power On/Off Switch. Digital
Temperature Display Provides: Ambient, Compressor Suction,
Compressor Discharge and Inlet Air Temperatures
*Standard on models 3512 through 3519
Optional Temperature Readouts Include: Air Outlet
Temperature, Refrigerant Temperature and Cooling Water In/Out
Optional Gauges Include: Air Outlet Pressure Gauge
Instrumentation Panel for High Capacity Dryers
Includes*: Refrigerant Suction Pressure Gauge, Air Inlet Pressure
Gauge, Air Outlet Pressure Gauge, Air Inlet Temperature Gauge,
Refrigerant Temperature, and Refrigerant Discharge Pressure Gauge.
*Standard on models 3548W through 4046W
Optional Instrumentation: Air Outlet Temperature, Air Dew Point
Temperature, Air Flow Gauge, Cooling Water Temperature In/Out,
High Inlet Air Temperature Light, High Discharge Pressure Light, Low Oil
Pressure Light, Low Ambient Cut Out, Dead System Shutdown Light and
Condensate Drain Alarm
-9-
WARRANTY
Arrow refrigerated type compressed air dryers are warranted to be free
from defects in material and workmanship, when used under conditions
recommended by the manufacturer, for a period of twelve (12) months from
the date of start-up not to exceed eighteen (18) months from date shipped
from factory. Products purchased from warehouse stock are warranted for
a period of twelve (12) months from date of shipment from that warehouse provided Arrow is furnished full name, address and date of shipment
information.
The patented modular heat exchanger used on models A-200 through 3560
is warranted for five (5) years. This warranty is limited to the replacement
of the heat exchanger, F.O.B. factory, and is subject to the same restrictions
as outlined below concerning misuse, abuse or accident.
This warranty applies to equipment installed, operated and maintained in
accordance with the procedures and recommendations as outlined in the
owner’s manual published by Arrow Pneumatics.
The electric drain trap is warranted to be free from mechanical defects for a
period of ninety (90) days.
Air cooled aftercoolers, watercooled aftercoolers and moisture separators
are warranted to be free from defects in material and workmanship, when
used under conditions recommended by the manufacturer, for a period of
twelve (12) months from the date of shipment from the factory or regional
warehouse.
During the period of this warranty, Arrow Pneumatics will repair or replace
(at Arrow’s option), free of charge, F.O.B. its plant, any defective part or
assembly, if such defect occurred in normal service and was not due to
apparent misuse, abuse or accident.
Before any warranty service work is started, it must first be authorized by
Arrow Pneumatics. Please contact our Warranty Department at
(847) 540-2133. Unauthorized service voids the warranty and any
resulting charges will not be reimbursed by Arrow Pneumatics.
The foregoing warranty is exclusive and in lieu of all other warranties,
written, oral or implied, and the company makes no warranty of merchantibility or fitness for any particular purpose or use. In no event shall the
company be liable for special, incidental or consequential damages or losses arising out of or caused by products which may prove to be defective,
including, but not limited to loss of revenues and loss of profits.
- 10 -
A R R O W
P N E U M A T I C S
Your Local Distributor
Arrow Pneumatics, Inc.
500 North Oakwood Road
Lake Zurich, Illinois 60047
Voice:
Fax:
Internet:
(847) 438-9100
(847) 438-7110
www.arrowpneumatics.com
X1020A
A R R O W
FILTERS
REGULATORS
P N E U M A
LUBRICATORS
T I C S
ACCESSORIES
H E A T L E S S
REGENERATIVE DRYERS
Twin tower regenerative air dryers are the dryers of choice
when traditional refrigerated dryers do not provide sufficient air
quality required for today’s applications. Arrow’s reliable ”RH”
series of heatless twin tower regenerative dryers normally
produce –40°F and can optionally be as low as –100°F dew
points. The dryer utilizes activated alumina for efficient drying of
compressed air and will operate under extreme environmental
conditions. Activated alumina is aluminum oxide that is highly
porous and exhibits tremendous surface area (350 sq.
meters/gram). Activated alumina is resistant to thermal shock
and abrasion. It has a smooth, uniform ball size that prevents
channeling of the air flow, which maintains low bed velocities.
This maintains air contact time for efficient moisture removal and
minimal pressure drop.
Height
Arrow’s microprocessor dryer controls are housed in a NEMA 4
rated enclosure and provide control of pneumatically piloted
valves chosen for long life and high air flow.
Operation
Compressed air saturated with water vapor passes through the
inlet valve and flows upward through the desiccant in tower “A”.
Tower “A” is said to be “on line”. The activated alumina desiccant
adsorbs the water vapor in the compressed air and the pressure
dew point is lowered to a minimum of –40°F. The dried air then
passes through a check valve assembly to the outlet piping and
then to the factory tools or equipment.
While the air is being dried in tower “A”, the desiccant in tower
“B” that adsorbed moisture in the previous cycle is simultaneously
regenerated. Tower “B” is “off line”. At the start of the regeneration
cycle, tower “B” is depressurized from the operating pressure to
atmospheric pressure with a downward air flow and passes
through the purge valve and out the purge muffler. Regeneration
continues with a portion of the dry air from tower “A” passing
through an orifice assembly and downward through tower “B”
out to atmosphere.
This process takes about ten minutes to complete, with the drying
cycle using about five minutes to provide the desired dew point.
The regeneration cycle takes approximately 30 seconds less
to allow for repressurization before switchover. The complete
operation therefore consists of two cycles, one for drying and
the other for regeneration. Required purge air is generally 15%
of rated flow. As pressure is a direct function of purge air, the
higher the pressure, the lower the purge. All Arrow Pneumatics
heatless regenerative dryers have a 2 psi maximum pressure
drop at standard conditions.
Width
Depth
Model
No.
Capacity
SCFM
Pipe Size
Connection
Height
Inches
Width
Inches
Depth
Inches
Weight
Lbs.
RH203
RH204
RH205
RH206
RH207
RH208
RH209
RH210
RH211
RH212
RH213
RH214
RH215
RH216
RH217
RH218
RH219
RH220
RH221
RH222
RH223
RH224
35
50
75
100
125
150
200
250
300
350
400
500
650
750
900
1,100
1,300
1,500
1,800
2,100
2,500
3,000
3/4” NPT
3/4” NPT
3/4” NPT
1” NPT
1” NPT
1-1/2” NPT
1-1/2” NPT
1-1/2” NPT
2” NPT
2” NPT
2” NPT
2” NPT
2-1/2” NPT
2-1/2” NPT
2-1/2” NPT
3” FLG
3” FLG
3” FLG
3” FLG
3” FLG
4” FLG
4” FLG
40
40
40
64
64
75
75
75
68
68
86
86
97
97
97
97
97
122
122
122
122
122
44
44
44
44
44
49
49
49
51
51
51
51
67
67
67
72
72
96
96
96
108
108
24
24
24
24
24
36
36
36
36
36
36
36
36
36
36
36
36
60
60
60
60
60
360
508
599
627
657
739
797
855
918
1,124
1,187
1,245
1,905
2,022
2,197
2,500
3,350
3,775
4,550
5,725
6,500
8,500
1) Specifications and dimensions are subject to change without notice.
3) Standard operating pressure is 150 psig maximum.
2) Standard design conditions are 100°F inlet, 100 psig and 100˚F
ambient. For other than standard design conditions or capacities up to
12,000 scfm, consult your factory representative.
4) Standard voltage is 120V/1ph/60Hz
5) Pre and after filters must be used with all regenerative air dryers.
6) Maximum pressure drop of 2 psi
Standard Features of
Heatless Regenerative Dryers
Fully automatic to provide the most efficient operation.
Panel mounted gauges provide accurate monitoring
of tower pressures.
Adjustable purge regulator is utilized to control purge
air for optimum dryer efficiency.
Indicator lights display tower operating status.
Visual moisture indicator detects increase in dew point
on outlet air flow.
Reliable pneumatic valve operation is achieved by using poppet,
butterfly and check valves. All valves are non-lubricated to provide
maximum dependability and maintenance free operation.
Controlled repressurization gradually increases pressure in
the tower to eliminate line surges and desiccant attrition.
Removable stainless steel diffuser screens disperse air flow
for maximum desiccant capacity and to allow uniform air
distribution throughout the desiccant bed.
NEMA 4 electrical construction.
TOWER ”A”
TOWER ”B”
O P T I O N S O F H E AT L E S S R E G E N E R AT I V E D RY E R S
Universally accepted 120V/1ph/60Hz power requirements
for easy connection.
Power on indicator to show dryer is energized and functioning.
Tower relief valves to prevent overpressurization.
Dew Point Demand Plus
220V/1ph/60Hz
ASME coded and stamped vessels.
Dew Point Demand
Pre-Piped Connection with Pre and
after Filters
Separate fill and drain ports for easy desiccant change.
High Humidity Alarm
–100°F Pressure Dew Point
Pre-Piped Filter Package with Three
Valve Dryer Bypass
Remote Alarm Contacts
Pre-Piped Filter Package with Seven
Valve Dryer Bypass
Remote Alarm Dry Contacts
NEMA 7 Explosion Proof
Electrical Construction
RS-232 Serial Communications
Interface
Microprocessor controls provide reliable sequencing of
dryer functions.
Control air line filter with replaceable element to protect
pneumatic circuitry.
Exhaust purge muffler for quiet operation.
Pressure alarm package indicates failure to shift, failure to
depressurize, failure to repressurize and failure to purge.
Total Pneumatic Controls
Low Ambient Package
See pages 8 and 9 for descriptions of optional features.
3
E X T E R N A L LY
HEATED
REGENERATIVE DRYERS
The Arrow Pneumatics externally heated twin tower regenerative
dryers combine the high reliability of our “RH” series desiccant
dryer and adds external heaters to form the “RE” series dryer.
Dew points, normally –40°F, can optionally be as low as
–100°F. Purge air is approximately 7% of rated flow, thus
reducing the operating costs of the heated twin tower
regenerative dryers compared to heatless regenerative dryers.
Purge air in the “RE” series is heated by a 100% efficient incoloy
sheath electric heater housed in an externally mounted shell.
A thermostat controls the temperature of the heater allowing
long life and energy savings. The heater and purge piping are
insulated for safety and further energy savings. Arrow “RE” series
heated dryers have microprocessor controls housed in a NEMA 4
rated enclosure. Pneumatically actuated valves have been chosen
for long life and high air flow.
Height
Operation
Regeneration of the “RE” series dryers is similar to the twin tower
regenerative dryers in that the airflow is reversed between
operation and regeneration. Compressed air saturated with
water vapor passes through the inlet valve and flows downward
through the desiccant in tower “A”. Tower “A” is said to be
“on-line”. The activated alumina desiccant adsorbs water vapor in
the compressed air and the pressure dew point is lowered to a
minimum of –40˚F. The dried air then passes through the outlet
valve to the factory tools and/or equipment.
While the air is being dried in tower “A”, the desiccant in tower
“B” that absorbed moisture in the previous cycle is simultaneously
regenerated. Tower “B” is “off line”. At the start of the regeneration
cycle, tower “B” is depressurized from the operating pressure
to atmospheric pressure with an upward air flow which passes
through the purge valve and out the purge muffler. Regeneration
continues with dried purge air from tower “A” that is expanded
to atmospheric pressure to lower its vapor pressure. This purge air
is heated and passes through an orifice assembly and upward
through tower “B” out to atmosphere. The temperature of the
heater can be adjusted for better efficiencies. The combination
of heated and lowered vapor pressure air allows for efficient
and cost effective desiccant regeneration.
The entire process therefore consists of two cycles, one for
drying and the other for regeneration. This process takes 8 hours
to complete, with the drying cycle using 4 hours to provide
the desired dew point, and regeneration cycle taking 4 hours;
3 hours for heating and 1 hour for cooling. As pressure is a
direct function of purge air, the higher the pressure, the lower the
purge. All Arrow Pneumatics externally heated regenerative dryers
have a 2 psi maximum pressure drop at standard conditions.
Width
Model
No.
RE231
RE232
RE233
RE234
RE235
RE236
RE237
RE238
RE239
RE240
RE241
RE242
RE243
RE244
RE245
RE246
RE247
RE248
RE249
RE250
Capacity
Heater
SCFM Power (KW)
50
.75
75
1.25
100
1.50
150
2.00
200
2.50
250
3.00
300
4.00
350
4.00
400
5.00
500
6.00
650
6.50
750
7.50
900
9.00
1,100
12.00
1,300
12.00
1,500
15.00
1,800
20.00
2,100
20.00
2,500
24.00
3,000
30.00
Depth
Pipe Size
Connection
3/4” NPT
3/4” NPT
1” NPT
1-1/2” NPT
1-1/2” NPT
1-1/2” NPT
2” NPT
2” NPT
2” NPT
2” NPT
2-1/2” NPT
2-1/2” NPT
2-1/2” NPT
3” FLG
3” FLG
3” FLG
3” FLG
3” FLG
4” FLG
4” FLG
Height Width Depth Weight
Inches Inches Inches Lbs.
40
44
24
440
40
44
24
600
64
44
24
760
75
49
36
930
75
49
36 1,050
75
49
36 1,330
68
51
36 1,525
68
51
36 1,700
86
51
36 1,940
86
51
36 2,275
97
67
36 2,650
97
67
36 3,170
97
67
36 3,750
97
72
36 4,175
97
72
36 4,580
122
96
60 5,020
122
96
60 5,410
122
96
60 6,040
122
108
60 8,720
122
108
60 9,880
1) Specifications and dimensions are subject to change without notice.
3) Standard operating pressure is 150 psig maximum.
2) Standard design conditions are 100°F inlet, 100 psig and 100˚F
ambient. For other than standard design conditions or capacities up to
12,000 scfm, consult your factory representative.
4) Standard voltage for RE231 thru RE233 is 120V/1ph/60Hz.
RE234 thru RE250 is 480V/3ph/60Hz.
5) Pre and after filters must be used with all regenerative air dryers.
6) Maximum pressure drop of 2 psi
Standard Features of Externally
Heated Regenerative Dryers
Externally mounted heater allows easy element service and
efficiently conducts heat uniformly throughout the desiccant
eliminating localized hot spots, desiccant fusing and heater
burnouts. Heater elements are incoloy sheathed for long,
trouble free service.
Heater thermostat controls and maintains user adjusted
regeneration temperature to account for changing flow
or seasonal moisture variations.
Interlock circuit protects units from heater burnout due
to loss of purge air flow.
Non-lubricated control valves are pneumatically actuated
to provide maximum dependability and maintenance
free operation.
Fully automatic to provide the most efficient operation.
Panel mounted gauges provide accurate monitoring of
tower pressures and temperatures.
Adjustable purge regulator is utilized to control purge air
for optimum dryer efficiency.
Indicator lights display tower operating status.
TOWER ”A”
TOWER ”B”
O P T I O N S O F E X T E R N A L LY
H E AT E D R E G E N E R AT I V E D RY E R S
Dew Point Demand Plus
Dew Point Demand
Pre-Piped Connection with Pre and
after Filters
Visual moisture indicator detects increase in dew point on
outlet air flow.
Controlled repressurization gradually increases pressure in
the tower to eliminate line surges and desiccant attrition.
Removable stainless steel diffuser screens disperse air flow
for maximum desiccant capacity and to allow uniform air
distribution throughout the desiccant bed.
Pre-Piped Filter Package with Three
Valve Dryer Bypass
NEMA 4 electrical construction.
Pre-Piped Filter Package with Seven
Valve Dryer Bypass
Tower relief valves to prevent overpressurization.
Remote Alarm Contacts
Remote Alarm Dry Contacts
Power Saver Thermal Control
Separate fill and drain ports for easy desiccant change.
NEMA 7 Explosion Proof
Electrical Construction
Heater Overtemp Alarm
Microprocessor controls provide reliable sequencing
of dryer functions.
High Humidity Alarm
–100°F Pressure Dew Point
Low Ambient Package
RS-232 Serial Communications
Interface
220V/1ph/60Hz
See pages 8 and 9 for descriptions of optional features.
Power on indicator to show dryer is energized and functioning.
ASME coded and stamped vessels.
Control air line filter with replaceable element to protect
pneumatic circuitry.
Exhaust purge muffler for quiet operation.
Pressure alarm package indicates failure to shift, failure to
depressurize, failure to repressurize and failure to purge.
5
B L O W E R
PURGE REGENERATIVE DRYERS
Arrow Pneumatics “BP” series blower purge regenerative
dryers are more economical to operate than heated or heatless
regenerative dryers. An external blower supplies heated
atmospheric air as the purge air source for regeneration.
This allows total air compressor capacity for plant operations.
Eliminating the use of compressed air as purge allows the plant to
more economically size the compressor only for plant operations.
The blower purge offers the same easy maintenance features
found in our heated regenerative dryer. The blower is designed
for industrial applications and has an intake filter that protects
the blower and dryer from damaging air born particles.
Operation
Our “BP” series blower purge dryers are fully automatic meaning
purge air from compressor is not needed. Regeneration is similar
to that of the “RE” series dryers in that the drying air flow is
downward and is reversed between operation and regeneration.
Compressed air saturated with water vapor passes through the
inlet valve and flows downward through Tower “A”. Tower “A”
is said to be “on-line.” The activated alumina desiccant adsorbs
water vapor in the compressed air and the pressure dew point
is lowered to a minimum of –40°F. The dried air then passes
through the outlet valve to the factory tools or equipment.
While the air is being dried in tower “A”, the desiccant in
tower “B” that absorbed moisture in the previous cycle is
simultaneously regenerated. Tower “B” is “off line”. At the start
of the regeneration cycle, tower “B” is depressurized from the
operating pressure to atmospheric pressure with an upward air
flow which passes through the purge valve and out the purge
muffler. Regeneration continues with purge air being generated
by an external blower. This purge air is heated and passes
upward through tower “B” out to atmosphere. The temperature
of the heater can be adjusted for better efficiencies. The
combination of heated and lowered vapor pressure air allows
for efficient and cost effective desiccant regeneration.
The entire process therefore consists of two cycles, one for
drying and the other for regeneration. This process takes 8 hours
to complete, with the drying cycle using 4 hours to provide the
desired dew point, and regeneration cycle taking 4 hours;
3 hours for heating and 1 hour for cooling.
Model Capacity
No.
SCFM
BP123
200
BP144
350
BP183
600
BP204
800
BP244 1,100
BP304 1,500
BP325 2,100
BP366 3,000
BP425 4,000
BP485 5,000
BP545 6,500
BP605 8,000
BP665 10,000
BP725 12,000
Heater
KW
6.00
9.00
15.00
20.00
36.00
40.00
50.00
75.00
105.00
140.00
175.00
230.00
280.00
340.00
Blower
Pipe Size Height
KW
Connection Inches
0.75 1-1/2” NPT
74
1.12
2” NPT
88
1.50 2-1/2” NPT
80
2.24
3” FLG
92
3.73
3” FLG
98
7.46
4” FLG
94
7.46
4” FLG
101
11.19
6” FLG
106
11.19
6” FLG
109
14.92
6” FLG
111
22.38
6” FLG
117
37.30
8” FLG
126
55.95
8” FLG
130
74.60
10” FLG
134
1) Specifications and dimensions are subject to change without notice.
3) Standard operating pressure is 150 psig maximum.
2) Standard design conditions are 100°F inlet, 100 psig and 100˚F
ambient. For other than standard design conditions or capacities up to
12,000 scfm, consult your factory representative.
4) Standard Voltage 480V/3ph/60Hz
5) Pre and after filters must be used with all regenerative air dryers.
Weight
Lbs.
1,375
2,260
2,900
4,150
5,600
7,425
8,675
11,200
15,500
17,700
20,900
26,400
31,600
37,800
Standard Features of Blower
Purge Regenerative Dryers
Externally mounted heater allows easy element service and
efficiently conducts heat uniformly throughout the desiccant
eliminating localized hot spots, desiccant fusing and heater
burnouts. Heater elements are incoloy sheathed for long,
trouble free service.
Heater thermostat controls and maintains user adjusted
regeneration temperature to account for changing flow
or seasonal moisture variations.
Interlock circuit protects units from heater burnout due to loss
of purge air flow.
Non-lubricated control valves are pneumatically actuated to
provide maximum dependability and maintenance free operation.
Fully automatic to provide the most efficient operation.
TOWER ”A”
TOWER ”B”
Panel mounted gauges provide accurate monitoring of
tower pressures and temperatures.
Indicator lights display tower operating status.
Visual moisture indicator detects increase in dew point on
outlet air flow.
OPTIONS OF BLOWER PURGE
R E G E N E R AT I V E D RY E R S
Dew Point Demand Plus
Controlled repressurization gradually increases pressure in
the tower to eliminate line surges and desiccant attrition.
Removable stainless steel diffuser screens disperse air flow
for maximum desiccant capacity and to allow uniform air
distribution throughout the desiccant bed as applicable.
Pre-Piped Filter Package with Three
Valve Dryer Bypass
NEMA 4 electrical construction.
Tower relief valves to prevent overpressurization.
Remote Alarm Contacts
Pre-Piped Filter Package with Seven
Valve Dryer Bypass
Remote Alarm Dry Contacts
Heater Overtemp Alarm
Separate fill and drain ports for easy desiccant change.
NEMA 7 Explosion Proof
Electrical Construction
Blower Purge Cool Down Loop
Microprocessor controls provide reliable sequencing of
dryer functions.
Low Ambient Package
RS-232 Serial Communications
Interface
Control air line filter with replaceable element to protect
pneumatic circuitry.
Power Saver Thermal Control
High Humidity Alarm
Dew Point Demand
Pre-Piped Connection with Pre and
after Filters
Power on indicator to show dryer is energized and functioning.
ASME coded and stamped vessels.
Exhaust purge muffler for quiet operation.
Heavy-duty blower designed for long life with intake filter
to protect the blower and dryer from damaging particles.
Butterfly throttle valve controls amount of purge air.
See pages 8 and 9 for descriptions of optional features.
Pressure alarm package indicates failure to shift, failure to
depressurize, failure to repressurize and failure to purge.
7
O P T I O N A L
FEATURES
Dew Point Demand Plus
(PICTURED) Dew Point Demand Plus is an energy saving system that
allows the user to program a controller for the desired dew point.
This system regenerates the “off-line” vessel completely and allows that
vessel to remain idle, while the “on-line” vessel dries service air. Outlet
air flow is continuously sampled and once the desired dew point is
reached a “tank switch-over” occurs and a new cycle begins. This
option saves a significant amount of “purge air” each year thereby
providing energy saving. This option includes a programmable digital
display, an extremely accurate sensor and a high humidity alarm.
DEW POINT DEMAND PLUS
Dew Point Demand
(PICTURED) Dew Point Demand is a cost effective alternative to Dew
Point Demand Plus. This system operates similar to the Dew Point
Demand Plus but does not have the digital display, high humidity
alarm or an adjustable dew point “tank switchover”. The “tank
switchover” occurs at a fixed –40˚F dew point.
High Humidity Alarm
This option continuously monitors the outlet air stream for dew point
performance. If a high humidity condition should occur, a panel
mounted visual alarm is energized.
RS-232 Serial Communications Interface
Allows serial port connections for computer monitoring of dryer
functions and operating statuses.
Heater Overtemp Alarm
Should a heater overtemperature condition exist, the integrated
overtemperature sensor automatically shuts down the heater until it
cools down to an acceptable temperature range. The sensor then
resets itself and heater operation will begin again. A panel mounted
visual alarm is energized during the overtemperature condition.
Remote Alarm Contacts
Contacts will be supplied for each alarm allowing an easy
connection method for energizing remote visual or audible alarms.
A 120-volt signal is sent when a failure occurs.
Remote Alarm Dry Contacts
This option closes a contact in the event of a failure condition
allowing the customer supplied alarm circuit to be activated.
Maximum voltage and current are 120 volt, 3 amperes.
–100˚F Pressure Dew Point
This option lowers the dew point from the standard –40˚F to –100˚ F
On heatless dryers, the cycling time is adjusted accordingly and a
repressurizing system is added. On the heated dryers, a split bed
of activated alumina and molecular sieve is added.
Low Ambient Package
Low ambient temperature protection is accomplished by encasing
both towers with a rugged insulation. This insulation along with
heat trace cables eliminates “freeze-ups” from low ambient
conditions such as cold outdoor or unheated indoor installations.
DEW POINT DEMAND
Power Saver Thermal Control
This option monitors the temperature of the purge air flow from
the regenerating tower. When the set regeneration temperature
is reached, the heater shuts off. Power Saver minimizes the
electrical energy used during regeneration when you have low
dryer moisture loading. This also prevents dew point spikes
and excessive temperature spikes at tower switchover.
NEMA 7 ENCLOSURE
Blower Purge Cool Down Loop
This option uses dry air from the “on-line” tower to cool and
“polish” the desiccant in the regenerating tower. This feature
ensures –40˚F dew points are maintained during tank switchover.
NEMA 7 Electrical Construction
(PICTURED) For applications where an explosion proof enclosure
and electrical construction are required. NEMA 7 enclosures are
capable of withstanding and containing internal explosions so
that an explosive atmosphere surrounding the enclosure will not
be ignited. Enclosed heat generating devices shall not cause
external surfaces to reach temperatures capable of igniting
explosive surrounding atmospheres.
Total Pneumatic Controls
For applications where electricity is unavailable or undesired,
such as remote field applications or duty in explosive
environments. This option uses an air driven timer and
control valves in place of electronic components.
Pre-piped Connection With Pre and After Filters
Prefilter and afterfilter mounted to dryer with integral piping ready
to install in system. See following page for filters included.
3-Valve Bypass w/Pre-piped Connection
Prefilter and afterfilter mounted to dryer with integral
piping and 3 bypass valves for bypassing filters and dryer.
Ready to install in system. See following page for filters included.
7-Valve Bypass w/Pre-piped Connection
Prefilter and afterfilter mounted to dryer with integral
piping and 7 bypass valves for individually bypassing either
filter and/or dryer. Ready to install in system. See following
page for filters included.
O P T I O N A L
O P T I O N A L
FEATURES
9
F I L T E R
PACKAGE
H E AT L E S S R E G E N E R AT I V E D R Y E R
R E C O M M E N D E D F I LT E R S
Dryer
Model
Dryer In/Out
Pipe Size
Dryer
SCFM
Prefilter
Model
Afterfilter
Model
RH203
RH204
RH205
RH206
RH207
RH208
RH209
RH210
RH211
RH212
RH213
RH214
RH215
RH216
RH217
RH218
RH219
RH220
RH221
RH222
RH223
RH224
3/4” NPT
3/4” NPT
3/4” NPT
1” NPT
1” NPT
1-1/2” NPT
1-1/2” NPT
1-1/2” NPT
2” NPT
2” NPT
2” NPT
2” NPT
2-1/2” NPT
2-1/2” NPT
2-1/2” NPT
3” FLG
3” FLG
3” FLG
3” FLG
3” FLG
4” FLG
4” FLG
35
50
75
100
125
150
200
250
300
350
400
500
650
750
900
1100
1300
1500
1800
2100
2500
3000
F505-06DF
F505-06DF
F505-06DF
F508-08DF
F508-08DF
F510-12DT
F510-12DT
F510-12DT
F510-16DT
F510-16DT
F518-16DT
F518-16DT
F519-24DT
F529-24DT
F529-24DT
F5AX2M-24DF
F5AX2M-24DF
F5AX2L-24DF
F5AX2L-24DF
F5AX3L-32DF
F5AX4L-48DF
F5AX4L-48DF
F329-06-3
F329-06-3
F329-06-3
F329-08-3
F329-08-3
F329-12-3
F329-12-3
F329-12-3
F3N1-16-3
F3N1-16-3
F3N1-16-3
F3N1-16-3
F3NHF-24-3
F3NHF-24-3
F3NHF-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX2M-32-3
F3AX3L-48-3
F3AX3L-48-3
E X T E R N A L LY H E A T E D R E G E N E R A T I V E D R Y E R
R E C O M M E N D E D F I LT E R S
Dryer
Model
Dryer In/Out
Pipe Size
Dryer
SCFM
Prefilter
Model
Afterfilter
Model
RE231
RE232
RE233
RE234
RE235
RE236
RE237
RE238
RE239
RE240
RE241
RE242
RE243
RE244
RE245
RE246
RE247
RE248
RE249
RE250
3/4” NPT
3/4” NPT
1” NPT
1-1/2” NPT
1-1/2” NPT
1-1/2” NPT
2” NPT
2” NPT
2” NPT
2” NPT
2-1/2” NPT
2-1/2” NPT
2-1/2” NPT
3” FLG
3” FLG
3” FLG
3” FLG
3” FLG
4” FLG
4” FLG
50
75
100
150
200
250
300
350
400
500
650
750
900
1100
1300
1500
1800
2100
2500
3000
F505-06DF
F505-06DF
F508-08DF
F510-12DT
F510-12DT
F510-12DT
F510-16DT
F510-16DT
F518-16DT
F518-16DT
F519-24DT
F529-24DT
F529-24DT
F5AX2M-24DF
F5AX2M-24DF
F5AX2L-24DF
F5AX2L-24DF
F5AX3L-32DF
F5AX4L-48DF
F5AX4L-48DF
F329-06-3
F329-06-3
F329-08-3
F329-12-3
F329-12-3
F329-12-3
F3N1-16-3
F3N1-16-3
F3N1-16-3
F3N1-16-3
F3NHF-24-3
F3NHF-24-3
F3NHF-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX2M-24-3
F3AX3L-48-3
F3AX3L-48-3
Note: For Blower Purge Regenerative Models BP123 thru BP725, consult factory for recommended pre and afterfilters.
Model
RH
RE
BP
Description
Heatless Regenerative Dryer
Externally Heated Regenerative Dryer
Blower Purge Regenerative Dryer
Dryer Size
RH
SCFM
203
35
204
50
205
75
206
100
207
125
208
150
209
200
210
250
211
300
212
350
213
400
214
500
215
650
216
750
217
900
218
1100
219
1300
220
1500
221
1800
222
2100
223
2500
224
3000
Dew Point
A
B
Voltage
1
2
3
4
RE
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
SCFM
50
75
100
150
200
250
300
350
400
500
650
750
900
1100
1300
1500
1800
2100
2500
3000
BP
123
144
185
205
245
305
325
365
366
425
485
545
605
665
725
Dew Point Control & Monitoring Options
1
None
2
Dew Point Demand Plus
3
Dew Point Demand
4
Dew Point Demand and High Humidity Alarm
5
High Humidity Alarm
SCFM
200
350
600
800
1100
1500
2100
2500
3000
4000
5000
6500
8000
10000
12000
Heater Options (RE Dryers Only)
A
None
B
Heater Overtemp Alarm
C
Power Saver Thermal Control
D
Heater Overtemp Alarm and Power Saver
Remote Alarm Contacts Options
1
None
2
Remote Alarm Contacts (120V)
3
Remote Alarm Dry Contacts
Pre-Piping and Bypass Options
A
None
B
Pre-piped Filter Package
C
Pre-piped Filter PKG W/3 Valve Dryer Bypass
D
Pre-piped Filter PKG W/7 Valve Dryer Bypass
RS-232 Interface Option
1
None
2
RS-232 Serial Communications Interface
Low Ambient Options
A
None
B
Low Ambient Insulation
–40˚ F
–100˚ F
Cool Down Loop Option (BP Dryers only)
1
None
2
Blower Purge Cool Down Loop
120V/1ph/60Hz
480V/3ph/60Hz
220V/1ph/60Hz
220V/3ph/60Hz
Electrical Construction
A
NEMA 4
B
NEMA 7
C
Total Pneumatic Controls (RH Dryers Only)
Cool Down Loop Option
Low Ambient Option
RS-232 Interface Option
Pre-piping and Bypass
Options
Remote Alarm
Contacts Options
Heater Options
Dew Point Control and
Monitoring Options
Electrical Construction
Voltage
Dew Point
Dryer Size
Model
R H 2 0 3 A 1 A 3 A 2 A 1 A 1
11
Arrow Pneumatics, Inc.
500 North Oakwood Road
Lake Zurich, Illinois 60047
Voice: (847) 438-9100
Fax:
(847) 438-7110
Internet: www.arrowpneumatics.com
Energy Saving
Dry Air Technology
b y A r r o w P n e u m a t i c s
“C” SERIES CYCLING DRYER
Arrow Model Numbers 3514C through 3560C
Features
Significant energy savings
Longer compressor life because of
reduced cycling wear
Semi-hermetic compressors have a 3
times longer life than hermetic compressors
More BTU’s/HR capacity per KW with
Semi-Hermetic Compressor
No Dew Point spikes that occur with
cycling type dryers
Superior heat exchanger design with
spiral fin tube construction
THE BEST COMBINATION IN THE REFRIGERATED AIR DRYER BUSINESS
SEMI HERMETIC COMPRESSORS
Long Life Compressors (3 Times Longer than Hermetic Design)
High Flow Oil Pump
Much More Cooling Capacity (BTU/HR) than Hermetic Design
Head Unloaders Provide for Greater Energy Savings at Less than
Full Load Conditions
Environmentally Friendly R-22 Refrigerant (R134A Refrigerant
Available)
Field Repairable and Rebuildable
High Efficiency Motors
ARROW PNEUMATICS SPIRAL FIN TUBE HEAT EXCHANGER DESIGN
100% Copper Tube within a Tube Design
Exclusive Spiral Fin Tube in Evaporator Elimintates
Laminar Flow and Acts as a Cold Mechanical
Separator to Eliminate Fog and Mist
Large Inlet and Outlet Manifolds Assures EvenAir
Flow Through Tubes
Refrigerant Feeder Assembly Delivers Precise Amounts of
Refrigerant to Each Tube
Most Efficient Separator Design on the Market
Why specify a semi-hermetic compressor with head unloaders for a refrigerated air dryer?
Refrigerated air dryers rarely handle the same amount of compressed air at the same inlet temperature for any extended period of time.
The BTU’s/Hr. load on the dryer is constantly changing because the demand for compressed air in most plants varies from one minute to
the next and from one shift to the next. Not only does the CFM requirements constantly change but the inlet temperature to the dryer
varies dramatically depending on ambient temperatures. When sizing an air dryer, it is necessary to know all the conditions of the
application, like the maximum pressures and temperatures the dryer will encounter. Knowing this information is most important to the
performance and reliability of the dryer which is selected.
Refrigerated air dryers per industry standards are rated at a given CFM at 100°F inlet air temperature, 100°F ambient temperature and
100 PSIG operating pressure. The chart below shows how the performance of the dryer changes as the above design conditions
change.
Design
Actual
Affect on
Conditions
Conditions
Performance
Air Flow %
100%
50%
Reduces Load 50%
Inlet Air Temperature
100°F
75°F
Reduces Load 44%
Ambient Air Temperature
100°F
80°F
Reduces Load 14%
As you can see knowing the actual operating conditions for the application, a properly sized “C” SERIES dryer can be selected to reduce
the customers operating costs.
HERE’S HOW IT WORKS!
An Arrow “C” Series Refrigerated Air Dryer equipped with a semi-hermetic compressor and head unloaders will reduce the KW input to
the dryer and save electricity at times when the dryer is operating at less than fully loaded conditions. Dryers equipped with four cylinder compressors can be unloaded to 1/2 of their full rated capacity and dryers equipped with six cylinder compressors can be unloaded
to 2/3rds and 1/3rd of their full rated capacity. A typical plant operating 6000 hours per year could expect significant savings with the
combination of an efficient semi-hermetic compressor and head unloaders. The semi-hermetic compressor is more efficient and at full
load uses less power than a regular hermetic compressor.
An average plant operating 6000 hours per year will, realistically, operate the dryer 1/3rd of the time fully loaded, 1/3rd of the time
2/3rds loaded, and 1/3rd of the time 1/3rd loaded.
The cost to operate a 1500 CFM dryer fully loaded without head unloaders for 6000 hours would be:
6000 HRS X 8.11 KW X .10 KWH = $4,866
To operate the same dryer fully loaded on the 1st shift, 2/3rds loaded on the 2nd shift and 1/3rd loaded on the 3rd shift would be:
2000 hours X 8.11 KW X $.10 KWH = $1,622
2000 hours X 6.75 KW X $.10 KWH = $1,166
2000 hours X 4.12 KW X $.10 KWH = $714
The total electrical cost would be $3,502 compared to $4,866 or a savings of $1,364 per year.
Semi-Hermetic Compressor Performance
R-22 Refrigerant
Model
3514-*C
3514W-*C
3515-*C
3515W-*C
3516-*C
3516W-*C
3517-*C
3517W-*C
3518-*C
3518W-*C
3519-*C
3519W-*C
3521-*C
3521W-*C
3548W-*C
3522-*C
3523-*C
3549W-*C
3524-*C
3550-*C
3550W-*C
3560-*C
3560W-*C
Flow
Energy
# of
Energy
1st Step
2nd Step
In/Outlet
Capacity
Step
Full Load
HP
Savings
Cylinders
Savings
Unloader KW
Unloader KW
Connections Unloaders
SCFM
KW
500
500
625
625
750
750
1000
1000
1200
1200
1600
1600
2000
2000
2300
2500
3000
3000
3750
4000
4000
5000
5000
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
4
6
4
6
4
6
4
3
3
3
3
5
5
5
5
5
5
6.5
6.5
7.5
7.5
10
10
15
10
15
25
15
25
20
3” NPT
3” NPT
3” NPT
3” NPT
3” NPT
3” NPT
4” FLG
4” FLG
4” FLG
4” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
6” FLG
8” FLG
8” FLG
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
1
2
1
2
1
2
1
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
Step
4.07
3.20
4.07
3.20
5.04
4.17
6.51
5.25
7.13
5.87
9.37
8.11
14.56
13.30
13.30
14.81
18.06
13.30
19.57
18.90
16.55
27.02
16.55
2.32
1.82
2.32
1.82
2.87
2.38
3.71
2.99
4.06
3.35
6.75
5.84
10.48
9.58
9.58
10.48
10.29
9.58
11.10
14.45
9.43
20.93
9.43
43%
43%
43%
43%
43%
43%
43%
43%
43%
43%
28%
28%
28%
28%
28%
28%
43%
28%
43%
28%
43%
28%
43%
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4.12
3.57
6.41
5.85
5.85
6.41
N/A
5.85
N/A
10.00
N/A
14.55
N/A
56%
56%
56%
56%
56%
56%
0%
56%
0%
56%
0%
56%
0%
All capacities above are based on design conditions of 100°F inlet, 100 PSIG and 100°F ambient.
* - Voltage Code
-3 - 208/3/60 or 200-240/3/50
-4 - 460/3/60 or 380/3/50
-5 - 575/3/60
Arrow Pneumatics, Inc.
500 North Oakwood Road
Lake Zurich, Illinois 60047
Voice:
Fax:
Internet:
(847) 438-9100
(847) 438-7110
www.arrowpneumatics.com
X1022A
Mini-Regenerative
Dry Air Technology
M I N I - H E A T L E S S
REGENERATIVE
DRYERS
Twin tower Mini-regenerative air dryers are the desiccant dryer
of choice for low flow applications. Arrow’s reliable series of
heatless twin tower dryers produce dew points as low as -40OF
but can be configured to create dew points as low as -100OF.
S TA N D A R D F E AT U R E S
Fully automatic to provide the most efficient operation
Panel mounted gauges provide accurate monitoring of tower pressures
Reliable pneumatic valve operation is achieved by an electrically
activated spool valve and a shuttle check valve. All valves are nonlubricated to provide maximum dependability and maintenance free
operation.
Removable stainless steel diffuser screens disperse air flow for maximum desiccant capacity and to allow uniform air distribution throughout the desiccant bed.
Solid-state controls provide reliable sequencing or dryer functions
Power-On lighted switch to show dryer is energized and functioning
Exhaust Purge muffler for quiet operation
Universally accepted 120V/1ph/60Hz power requirements for easy
connection.
Six foot cord included
A P P L I C AT I O N S
O P T I O N A L F E AT U R E S
CNC Machines
-100OF Pressure Dew Point
Low dew point instrument air
220v/1ph/60Hz
Prevent air line freeze-ups
BENEFITS
Pressurizing of electronic cabinets
Cabinet designed for wall mounting
Medical and dental equipment
Tamper resistant: All components fully enclosed
Paint spray systems
Dry air instantly - no waiting
Plastic molding
Low to zero maintenance
Dry powder coating
Long lasting desiccant
Auto body repair shops
No electrician required
Arrow Pneumatics, Inc.
500 North Oakwood Road
Lake Zurich, Illinois 60047
Voice:
Fax:
Internet:
(847) 438-9100
(847) 438-7110
www.arrowpneumatics.com
Cycle One
Wet compressed air enters the dryer and is directed into
Tower A through the inlet switching valve.(1) The wet air
passes through the desiccant bed while the activated
alumina strips moisture leaving dry service air. A portion
of this extremely dry air passes though the orificed
shuttle check valve(2) and flows downward through Tower
B, drying out the saturated desiccant and exhausting out
of the purge muffler.(3)
Cycle Two
Dry Outlet Air
Dry Outlet Air
2
Orificed Shuttle
Check Valve
Tower
A
This “regenerating operation” is actually two cycles, one
for drying service air, and one for drying desiccant. After
approximately five minutes, the switching valve redirects
flow, repeating the cycle.
Tower
B
Required purge air is generally 15% of rated flow.
Tower
A
Tower
B
1
Inlet Switching Valve
All Arrow Pneumatic mini-regen dryers have less than
a 2 psi maximum pressure drop at standard conditions.
Drying Air Flow
Regenerating Air Flow
3
Purge Muffler
3
Wet Inlet Air
Wet Inlet Air
Purge Muffler
Dimensions
Model
RH105A1
Height (H)
inches
22
Width (W)
inches
10
Depth (D)
inches
5
Weight
(lbs)
50
RH110A1
22
10
5
60
RH115A1
30
12
8
70
RH120A1
30
12
8
80
RH125A1
30
12
8
90
D
H
180º
w
3.25”
Specifications
Model
Capacity
SCFM
Purge Flow
SCFM
In/Out
conn.
RH105A1
5
.71
1/2” NPT
RH110A1
10
1.41
1/2” NPT
RH115A1
15
2.12
1/2” NPT
RH120A1
20
2.82
1/2” NPT
RH125A1
25
3.53
1/2” NPT
1) Capacities are based on 100º inlet temp. 100ºF ambient
temp and 100PSIG inlet
2) Maximum working pressure is 150 PSIG
3) Coalescing filters must be installed before all mini-regenerative dryers to
protect desiccant from oil contamination
4) Particulate filters must be installed after all mini-regenerative dryers to
filter desiccant dust
5) Standard Voltage is 120v/1ph/60Hz
6) Amp draw 0.5 amps
RECOMMENDED FILTERS FOR ARROW MINI REGENERATIVE AIR DRYER
Dryer Model
Pre-Filter
Inlet/Outlet Conn.
After Filter
Outlet
Inlet
Inlet/Outlet Conn.
RH105
F552FW
1/4" NPT
F352-3
1/4" NPT
RH110
F552FW
1/4" NPT
F352-3
1/4" NPT
RH115
F554FW
1/2" NPT
F354-3
1/2" NPT
RH120
F554FW
1/2" NPT
F354-3
1/2" NPT
RH125
F554FW
1/2" NPT
F354-3
1/2" NPT
*”F” suffix indicates an internal float drain
*-3” suffix indicates 3 micron filter
Arrow Pneumatics, Inc.
500 North Oakwood Road
Lake Zurich, Illinois 60047
Voice:
Fax:
Internet:
(847) 438-9100
(847) 438-7110
www.arrowpneumatics.com
X1019
Download PDF