FT Mechanism Assembly 40mm

FT Mechanism Assembly 40mm
0666050/1
IM-S02-17
ST Issue 1
FT Mechanism Assembly 40mm
Installation and Maintenance Instructions
In line with our policy of continuous product
improvement, we have found it beneficial to
add a baffle plate over the inlet port.
This eliminates any risk of flow from the inlet
port affecting the correct operation of the float.
Inlet
Port
When fitting the mechanism please assemble
the baffle plate supplied under the mechanism
retaining bolts. The correct positioning is shown
on sketch.
Inlet
Baffle
Inlet
Port
Baffle Arrangement used on 40 mm:FT 10, FT 46
FT 43, FT 44 and FT 47 (horizontal only)
Printed in the
IM-S02-17
STUK
Issue 1
© Copyright 1996
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement