Edimax | IR-112E | User manual | Edimax IR-112E User manual

IR-112E
User Manual
10-2013 / v1.0
COPYRIGHT
Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties, merchantability, or fitness for any particular purpose.
Any software described in this manual is sold or licensed as is. Should the
programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all necessary
servicing, repair, and any incidental or consequential damages resulting from
any defect in the software. Edimax Technology Co., Ltd. reserves the right to
revise this publication and to make changes from time to time in the contents
hereof without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more information about this product,
please refer to the user manual on the CD-ROM. The software and
specifications are subject to change without notice. Please visit our website
www.edimax.com for updates. All brand and product names mentioned in this
manual are trademarks and/or registered trademarks of their respective holders.
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License
version 2. The program is free software and distributed without any warranty of
the author. We offer, valid for at least three years, to give you, for a charge no
more than the costs of physically performing source distribution, a complete
machine-readable copy of the corresponding source code.
Edimax Technology Co., Ltd.
Add: No. 3, Wu-Chuan 3rd Rd., Wu-Ku Industrial Park, New Taipei City, Taiwan
(R.O.C.)
Tel: +886-2-77396888
Email: sales@edimax.com.tw
1
CONTENTS Chapter I
Introduction ................................................................................................ 4
1.1
Highlights of your new Network IP Camera ..........................................................4
1.2
Safety Instructions ...............................................................................................5
1.3
Packaging Contents .............................................................................................6
1.4
Familiar with your new Network IP Camera..........................................................7
1.5
Installation of the Network IP Camera ..................................................................8
Chapter II
Using Network IP Camera by Web Interface ............................................... 10
2.1 Locate the IP address of Network IP Camera ............................................................. 10
2.2 Connect to IP Camera’s Web User Interface and Install ActiveX Plugin ....................... 12
2.3 Viewing Live Video ................................................................................................... 15
2.4 Client Settings .......................................................................................................... 17
Chapter III Advanced Configuration ................................................................................ 19
3-1 System ..................................................................................................................... 20
3-2 Security.................................................................................................................... 22
3-3 Network................................................................................................................... 24
3-3-1 ‘General’ setup page .................................................................................................. 24
3-3-2 ‘Advanced’ setup page ............................................................................................... 26
3-4 IP Filter .................................................................................................................... 28
3-5 Video ....................................................................................................................... 31
3-5-1 Image Setting ............................................................................................................. 32
3-5-2 Video Setting .............................................................................................................. 34
3-5-3 Overlay Setting........................................................................................................... 37
3-6 Motion..................................................................................................................... 38
3-7 Event ....................................................................................................................... 40
3-7-1 Settings ...................................................................................................................... 41
2
3-7-2 Media ......................................................................................................................... 43
3-7-3 Event Server ............................................................................................................... 44
3-8 Recording to Micro SD Card ...................................................................................... 48
3-9 SDHC........................................................................................................................ 49
3-10 Log ......................................................................................................................... 51
3-11 Device Info ............................................................................................................. 52
3-12 Maintenance .......................................................................................................... 53
3-13 Language................................................................................................................ 54
Chapter V
Troubleshooting ........................................................................................ 55
Notice According to GNU General Public License Version 2 ............................................. 61
3
Chapter I
Introduction
1.1 Highlights of your new Network IP Camera
Congratulates on purchasing this high-resolution 3Mega pixels
network IP Camera! This IP Camera provides 3Mega pixels
high-resolution video quality, with the advanced megapixel lens,
you can view images remotely in more detail than conventional
close-circuit cameras.
Other highlights of this network IP Camera include:
 IR illumination distance over 15 meters.
 Mechanical IR-cut filter removable.
 Up to 1080P resolution at 10 FPS.
 H.264/MPEG4/MJPEG multiple streams output for live monitoring
and high resolution recording.
 Event management by motion detection
 Built-in SD-card slot for local storage, which can act like a
stand-alone DVR.
 Support mobile phone remote monitoring
 ONVIF compliant.
 Support IEEE802.3af Power over Ethernet (PoE) standard.
4
1.2 Safety Instructions
Please follow the safety instructions listed below when you’re using this
Network IP Camera, or you would harm this camera and/or yourself! Also,
the warranty will become void if you disobey these safety instructions.
 This Network IP Camera is sophisticated electronic device; do not drop
it from high places.
 This IP Camera is not a toy; keep it out from the reach of children.
 Do not insert any accessories of this IP Camera into your body.
 Make sure lens set is secured when you’re using this IP Camera, lens set
may fall down if it’s not properly secured, and cause damage to human
and itself.
 If you want to use this IP Camera at any place that may be spilled by
water or dirt; a secure and water-proof camera housing is required.
 Do not pull any cord that is connected to this IP Camera by force.
 IP Camera will become hot after long time of use. Refrain from touch IP
Camera with hand, or cover this IP camera with paper or cloth.
 If the IP Camera falls into water when powered, do not attempt to
retrieve it back by yourself! Find a qualified electric technician for help.
5
1.3 Packaging Contents
Please check the contents of your new Network IP Camera when you
unpack the package. If any item is missing, please contact your dealer of
purchase for help.
Item No.
Description
Quantity
1
Network camera
1
2
Sun shield kit
1
3
Screw
1
4
CDROM
1
5
Quick installation guide
1
6
1.4 Familiar with your new Network IP Camera
No.
1
2
3
4
5
Description
IR-LED
Day/night sensor
Lens: Fixed focal length.
DC 5Volt/2A input
Network, RJ45 connector
[Cable ASSIGNMENT]
Item
Description
1
DC 5Volt/2A input
2
Network, RJ45 connector, two LED index, orange color is power index,
green is network index
7
1.5 Installation of the Network IP Camera
Please follow the instructions below to setup your new IP camera.
1. Connect Ethernet cable to LAN port.
2. Plug DC power adapter to power outlet on the wall.
3. Connect DC power cable to IP Camera’s DC power connector.
4. If everything’s ok, you should see the left LED light on LAN port light up.
If not, please recheck every step and try again, or ask your dealer of
purchase for help.
5. Remove the front glass mask to fine tune lens focus. When lens focus
fine tune ready, then screw the glass mask to the end position which
can not do any more.
8
6. Remove the front cover to find the Micro-SD card slot.
7. Find the screws in the package, use screwdriver to fix the sun shield on
the device’s main body.
8. Secure the wall mouting metal bracket on the wall then secure the
bullet camera on the bracket. There ae two spots available.
9
Chapter II Using Network IP Camera by Web
Interface
2.1 Locate the IP address of Network IP Camera
You can use your new Network IP Camera by its web user interface via web
browser. Currently the viewing system requirement for Network IP camera
is:
■
OS: Microsoft Windows XP / Vista / Win7
■
Browser: IE8 / IE9 (32bits)
■
Cell phone: 3GPP player
■
Quick
Time: 7.0experience
or above we recommend that you use
Note: For
best viewing
Microsoft Windows Internet Explorer 8 or 9.
You must know the IP address of IP Camera before you can connect to it.
By default, the network camera automatically obtains an IP address from
the DHCP server on your local network. Check your DHCP server’s IP
address lease table to find the network camera’s IP address, or use the
EdiView Finder utility included in the CD.
Note: We recommend that you use Microsoft Windows to install your
network camera - Mac is not supported.
1. Insert the CD into your CD-ROM drive. When the wizard appears, click
“Setup Utility” to install the “EdiView Finder” software.
10
Note: The contents of the CD-ROM can also be downloaded
from the Edimax website:
http://www.edimax.com/en/index.php
2. After the installation is complete, double-click the “EdiView_Finder”
icon to execute the application.
3. Press ‘Discover’ button to search for all IP Cameras on your local
network (make sure all IP Cameras are powered on and connect to local
network first). When you find any IP Camera, you can double click on it
or click ‘Link’ button to connect to it by your web browser.
If you need to change a certain IP Camera’s IP address, you can also click
on the IP Camera you wish to change IP address, then click ‘Change IP’
button to change select IP Camera’s IP address setting.
If you no longer need to use this utility, click ‘Exit’ button to close it.
Please note:
If you have several network connections, such as “Wireless
Function”, please disable the “Wireless Functions” or / and other
network connections that is not connected to IP camera,, or IP
finder may fail to search IP camera!
11
2.2 Connect to IP Camera’s Web User Interface and Install
ActiveX Plugin
When you know the IP address of IP Camera, you can connect to it by
Internet Explorer web browser by entering its IP address in address bar.
The use login screen will appear when you get connected:
IP Camera’s administrator username and password are ‘admin’ and
‘1234’(lower case) by default. Click ‘OK’ button or press ‘ENTER’ key on
your keyboard when you finish entering username and password.
When you connect to IP Camera for the first time, you’ll see the following
message. This message prompts you that you need to install ActiveX
plug-in before you can see the video from IP Camera.
For IE 8:
Right click the indication bar and click:‘‘Install This Add-on for All Users on
This Computer…’ to install ActiveX plugin.
12
For IE 9:
Click ‘Install’ button located at the bottom of IE to install ActiveX plugin.
If you’re prompted that:
‘Windows Firewall has blocked some features of this program’
Click ‘Allow access’, or IP Camera will not be able to function properly.
13
When you’re installing Internet Explorer plugin, you may also be prompted
that if you want to allow changes to be made to your computer:
Click ‘Yes’ to allow changes.
After ActiveX plugin is installed, you should be able to see the video stream
from camera.
NOTE:
If this is the first time you use this IP Camera, you can refer to
chapter 2.4 for instructions on Setup Wizard, which will guide
you to complete the software setup of your new IP Camera.
14
2.3 Viewing Live Video
After ActiveX control is installed, you can view IP camera’s video by web
browser. Just connect to IP camera by web browser and login, then you
can see live video from IP camera:
There are various controls on web page, here are descriptions of every
control item:
Item
Description
‘Home’ button
This button is visible in all setup pages of IP camera, and
you can go back to live video view by clicking this button
when you’re in other page.
Stream
This camera supports H.264 only. H.264 required less
network bandwidth and this will help when network
connection is slow.
Client Settings
Open ‘Client Setting’ menu.
Configuration
Open ‘Configuration’ menu.
Language
Open language menu, you can switch web interface to
other language.
Available languages: English, Simplified Chinese,
Traditional Chinese and Japanese
Original size /
Switches live image view between original size (full size:
Fit screen
2M pixels) and fit screen (smaller size).
If you want to see video in detail, switch to original size. If
/
your computer monitor’s resolution is not enough and
you want to see full image view, switch to fit screen and
image size will adjust automatically.
15
‘Connect’ button
Start live video view.
‘Disconnect’ button
Stop live video view.
‘Snapshot’ button
Take a snapshot or camera
video and save image file
on your computer. When
you click this button, a new
window will appear:
Click ‘Save’ button when
you see the image you wish
to save, and you’ll be
prompted to indicate the
folder on your computer to
save image file. If you changed your mind and don’t want
to save image file, click ‘Cancel’.
‘Start Video Record’ Click this button to record video and save video file on
button
your computer.
‘Enable Digital
Zoom’ button
This function will enlarge video view digitally from 1X to
10X. Move the bar up to see objects in screen in detail.
The blue square in the small screen at the left top side
high lights the zoom in range.
Please note: that digital zoom uses computer algorithm to
enlarge the video and some details may lost. If you need
to focus on detail of specific objects in video view, please
use optical zoom ring on lens set of IP camera.
16
2.4 Client Settings
In ‘Client Settings’ menu, you configure basic IP camera settings like data
transfer protocol and data storage folder.
To access ‘Client Settings’ menu, click ‘Client Settings’ button on the left.
The following screen will appear:
17
Here are the descriptions of every setup item:
Item
Description
RTSP/RTP over TCP
Select this option to use RTSP (Real-Time Streaming
Protocol) to transfer video data over TCP.
*Refer to the application note ‘RTSP/RTP over TCP/UDP’
for details.
RTSP/RTP over UDP
Select this option to use RTSP (Real-Time Streaming
Protocol) to transfer video data over UDP.
*Refer to the application note ‘RTSP/RTP over TCP/UDP’
for details.
HTTP
Select this option to use HTTP (Hyper-Text Transfer
Protocol) to transfer video data.
If you don’t know which one you should use, select ‘RTSP’.
Folder
Select a folder on your computer to save recorded video.
Click ‘Browse’ button and you’ll be prompted to select a
folder.
Prefix
When saving video files, the characters you typed in
‘Prefix’ field will be used as leading characters of video
file’s name.
For example, the default setting of ‘Prefix’ is ‘CLIP’, and
video file’s named will be ‘CLIPxxxx’, where xxxx is a 4-digit
serial number.
Add date and time
Check this box to add data and time to the ending part of
suffix to file name
video file’s filename, so you can see the date and time the
video file is created directly from its filename.
When you finish with above settings, click ‘Apply’ button to save changes.
18
Chapter III Advanced Configuration
If you wish to configure IP camera’s settings, you can access IP camera’s
‘Configuration’ menu, which provides various kinds of system setting.
To access configuration menu, click ‘Configuration’ button on the left.
The ‘Configuration’ submenu will appear, please pick a setup item you
wish to configure.
19
3-1 System
In this menu, you can configure basic IP camera settings like hostname and
time.
Here are the descriptions of every setup item:
Item
Description
Host Name
Input the IP camera’s hostname here, it can be any
meaningful words or characters that will help you to identify
this IP camera. You can use IP camera’s installation location
as host name, and this will help you to identify IP camera
when you have many IP cameras installed.
Indicator LED
The LED lights located at the back of IP camera is switched
on by default. But, if you don’t want other people to know
the status of this IP camera (so they will know this IP camera
is operating etc.), you can select ‘Off’ and LED lights will be
switched off.
Camera Date and
Time
Here shows the date and time.
20
Timezone
Daylight Saving
Keep the current
date and time
Synchronize with
computer time
Synchronize with
NTP Server
Select the time zone of residence from dropdown menu to
keep correct date and time.
If the area you live uses daylight saving, check this box;
otherwise do not check this box to keep time correct.
Select this option and date / time setting will not be
changed when you click ‘Apply’ in the page.
You can check ‘Camera Date and Time’ item in this page to
know IP camera’s current date and time setting.
Select this item and IP camera will use your computer’s time
as its time.
Select this item and IP camera will keep its date and time
setting synchronized with specified time server (NTP
server). Please input NTP server’s IP address or host name
in ‘NTP Server Address’ field, and select time update
interval from ‘Update Interval’ dropdown menu.
Please note that if this IP camera can’t access Internet, you
must have a time server on local area network, or set the
time manually.
Set Manually
Set IP camera’s date and time manually. Please set current
date and time by ‘Date’ and ‘Time’ dropdown menu.
When you finish with above settings, click ‘Apply’ button to save changes.
21
3-2 Security
In this menu, you can configure IP camera’s login account.
There are three kinds of account:
- Administrator (Can view IP camera’s video and make changes of camera
setting)
- User (Can view IP camera’s video and see LOG, and change Client
Setting and language)
- Guest (Can view IP camera’s video , and change language )
There can be multiple users, but only one administrator is allowed, and
you can’t change administrator’s user name (it will always be
‘administrator’).
22
Here are the descriptions of every setup item:
Item
Description
Password / Retype Here lists all users existed in IP camera. If you want to
Password
remove one user, click it in the list, and then click ‘Remove’
(Administrator)
button.
If no user is existed, ‘New Account’ message will be shown
here.
Account List
Input new user’s username here. User name must be
greater than 1 character and less than 32 characters.
User Name
Input this user’s password in both ‘Password’ and ‘Retype
Password’ field.
Authority
To define this user’s access privilege, select ‘User’ or ‘Guest’
in dropdown menu.
When you finish inputting new user’s information, click
‘New’ button to create a new user.
23
3-3 Network
In this menu, you can configure IP camera’s network setting.
3-3-1 ‘General’ setup page
Setup IP address for this IP camera. This IP camera supports both IPv4 and
IPv6 IP address.
Here are the descriptions of every setup item:
Item
LAN
Description
Select this option to assign an IP address to LAN port (or obtain
an address from DHCP server automatically).
Available options are:
DHCP IPv4: Obtain an IPv4 IP address from DHCP server on LAN
automatically.
DHCP IPv4 / IPv6: Obtain both IPv4 and IPv6 address from DHCP
server on LAN automatically.
Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP camera
24
manually. If you don’t have a DHCP server on your local area
network, you must use this option to specify an IP address.
IP Address(IPv4): Input IPv4 IP address*
IP Address(IPv6): Input IPv6 IP address*
Prefix Length: Input IPv6 IP address’ prefix length (0-128)
Subnet Mask: Input subnet mask
Gateway: Input gateway address
Primary DNS: Input DNS server’s IP address
Secondary DNS: Input backup DNS server’s IP address, you
can leave this field blank.
* You can leave this field blank, if you only wish to use IPv4 or
IPv6 IP address.
Enable UPnP Discovery: Check this b ox to enable other devices
on network to discover the presence of this IP camera by UPnP.
It’s recommended to enable this function.
PPPoE
HTTP Port
Enable UPnP Port Mapping: When UPnP is enabled, check this
box to enable UPnP’s port mapping.
Select this option to use PPPoE to connect to network. You have
to input PPPoE username and password assigned by network
operator to get connected.
Input IP camera’s web connection port number here. When this
port number is changed, you need to change web browser’s port
number you used to connect to IP camera.
For example, IP camera’s IP address is 192.168.2.3, and if you
changed HTTP port number to 82, please input
25
RTSP Port
RTP Data
Port
‘http://192.168.2.3:82’ in web browser’s address bar to access IP
camera’s web configuration interface.
Input RTSP port number. When this port number changes, you
must change corresponding settings in external network devices
(NVR or CMS software) so they can receive this IP camera’s video.
Input RTP data port number here.
When you finish with above settings, click ‘Apply’ button to save changes.
3-3-2 ‘Advanced’ setup page
You can setup advanced network settings in this page. This page is
intended for advanced settings only, and this IP camera will work fine even
you don’t make any changes to this page.
Here are the descriptions of every setup item:
26
Item
Multicast
Description
Enable video multicast:
Multicast Group Address: Input multicast group
address here, must be an address between 232.0.0.0 to
232.255.255.255.
Multicast video port: Input port number for video multicast
here.
Multicast RCTP video port: Input port number for RCTP video
here.
Multicast audio port: Input port number for audio here.
Multicast RCTP audio port: Input port number for RCTP audio
here.
Multicast TTL: Input TTL value for multicast here.
Bonjour
QoS
If you’re using MacOS and you have Bonjour installed, you can
use it to discover this IP camera.
Enable QoS to improve the data transfer priority of this IP
camera (Your local area network must support QoS).
You can select Video / Audio’s QoS DSCP value (0 to 63), or
both video and audio.
DDNS
Enable DDNS support if your ISP assigns dynamic IP address to
27
you. You must register a dynamic IP service first. Currently this
IP camera supports Dyndns, TZO and No-IP dynamic IP
service.
Provider: Select dynamic IP service provider.
Host Name: Input the host name you obtained from dynamic
IP service provider.
User name: Input user name used to login dynamic IP service
provider.
Password: Input the password used to login dynamic IP
service provider.
HTTPS
Check ‘Enable HTTPS’ box to enable HTTPS channel to encrypt
transferred data. You can also define HTTPS port number in
‘HTTPS Port’ field if you don’t want to use default value ‘443’.
When you finish, click ‘Apply’ to save changes.
3-4 IP Filter
When this IP camera is directly connected to Internet and not protected by
firewall, this function acts like a mini built-in firewall to protect the safety
of this IP camera and avoid attacks from hackers.
28
29
Here are the descriptions of every setup item:
Item
Description
Enable Filter
Check this box to enable IP address filter, uncheck this
Box to disable this function.
Accepted IP list Here lists all IP address that can build connections to this IP
camera. If you want to remove a set of IP address from the
list, click on the IP address and click ‘Remove’ button.
IP Address
Input the starting and ending IP address of IP address you
(Accepted IP list) wish to accept connections here. IP camera will only accept
connections established from these IP address.
If you want to specify one IP address only, input the
same IP address in both field.
Click ‘New’ button to add IP address into accepted
IP list.
Deny IP list
Here lists all IP address that cannot build connections to this
IP camera. If you want to remove a set of IP address from the
list, click on the IP address and click ‘Remove’ button.
IP Address
Input the starting and ending IP address of IP address you
(Accepted IP list) wish to deny connections here. IP camera will deny
connections established from these IP address.
If you want to specify one IP address only, input the same IP
address in both field.
Click ‘New’ button to add IP address into deny
IP list.
When you finish with above settings, click ‘Apply’ button to save changes.
30
3-5 Video
You can adjust the image of the IP camera in this menu.
There are 3 sub-menus in this menu: Image Setting, Video Setting, and
Overlay, which can be accessed by tabs on the top:
31
3-5-1 Image Setting
You can adjust the image parameters in this page.
Here are the descriptions of every setup item:
Item
Description
Brightness / Control the image parameters. Click ‘ - ‘ to decrease value, or click
Contrast /
‘ + ‘ to increase value. You can also input the value in the field
Saturation / directly.
Sharpness
Default
Set all above values to default value ‘128’.
Mirror
Check ‘Vertical’ or ‘Horizontal’ box to flip the image vertically or
32
Exposure
Mode
Power Line
Frequency
Condition
(AWB)
IR-cut
(Day/Night)
horizontally, this will help to correct the orientation of image when
IP camera is hanged bottom-up by camera holder.
You can click both ‘Vertical’ and ‘Horizontal’ box at the same time.
The default setting is Auto. Camera is able to adjust Exposure
related settings automatically.
This camera is able to adjust the exposure setting automatically by
default. In this page, it allows user to define the exposure setting
manually.
Set up the values of exposure value, exposure time and gain to
create a profile and click “Apply” to enable it.
Select the frequency of power line of the place you’re using this IP
camera. This will help to reduce the flicker of certain lights in the
image.
Select the condition that you’ll be using this IP camera from
dropdown menu.
- outdoor: Outdoor environment using.
- indoor: Indoor environment using.
- B/W: You’ll be using this IP camera in dark places where lights
are insufficient.
- Tungsten: Low color temperature environment using.
An IR-cut filter is built in this IP camera to reduce the effect of IR
lights (which will change the color of image and makes it looks
33
Day
different than what you see through your eye), and most of IR lights
are coming from sunlight.
You can select the behavior or IR-cut filter:
- Auto: IR filter will act automatically. If you don’t know if you
should use IR filter, select this option.
- Always ON(B/W): IR filter is always on.
- Always OFF(Color): IR filter is always off.
IR-cut filter will only be switched on when there’s sunlight. You can
define the starting and ending time when IR-cut filter should be
switched on by select ‘Schedule’ and define starting and ending
time by dropdown menu.
When you finish with above settings, click ‘Apply’ button to save changes.
3-5-2 Video Setting
You can adjust the video transfer parameters in this page.
34
Here are the descriptions of every setup item:
Item
Description
H.264
Select the compression of main stream: H.264.
Video
Select video resolution.
Resolution - H.264:
1920x1080 (1080p)
720x480 (D1)
/ 1280x960 (960p)
/ 640x480 (VGA)
/ 1280x720 (720p)
/ 320x240 (QVGA)
- MPEG4:
1920x1080 (1080p) / 1280x960 (960p) / 1280x720 (720p)
720x480 (D1)
/ 640x480 (VGA)
/ 320x240 (QVGA)
Please note that some video resolution is not available when video
encoder is ‘MPEG4’.
Frame
Rate
Rate
Control
When network speed is insufficient, select a lower video resolution
will help.
Select video frame rate. Please note that some frame rate is not
available when video encoder is ‘H.264’.
When network speed is insufficient, select a lower frame rate will
help.
Select video bit rate. You can control bit rate by both ‘Video quality’
and ‘Bitrate’:
- Video quality: There are 5 levels of video quality, select ‘very high’
to improve video quality but consumes more network bandwidth,
and select ‘very low’ will decrease video quality and consumes
less network bandwidth.
- Bitrate: Input video’s bit rate directly. It must an integer between
512 and 4000. Higher bit rate provides better video quality, but
35
consumes more network bandwidth.
When you finish with above settings, click ‘Apply’ button to save changes.
Note:
MJPEG options are only available for portable devices like cell phone.
The ‘Mobile View’ is used to enable cell phone monitoring function.
Please download APP from iPhone and Android APP store.
36
3-5-3 Overlay Setting
You can adjust the video overlay parameters in this page.
Here are the descriptions of every setup item:
Item
Description
Enable Time
Check this box to enable overlaying time stamp on video.
Stamp
Remove the
Check this box to remove time stamp’s background color. You
background color may find this will help the readability of time stamp text in
of the text
some cases.
(for Time Stamp)
Enable Text
Check this box to display certain text on video, this will help
Display
when you need to identify certain IP camera when you have a
lot of IP cameras.
Please input the text in ‘Text’ field. You can input up to 15
characters.
Remove the
Check this box to remove custom text’s background color. You
37
background color
of the text (Text)
Enable Image
Overlay
may find this will help the readability of text in some cases.
Check this box to overlay a specific image on video, so you can
show certain text / picture on the video and help people to
identify this IP camera.
Click ‘Browse’ button to pick a picture on your computer, then
click ‘Update’ button to use the picture. Please note that there
are certain restrictions:
- Select .bmp / .jpg / .jpeg image files only.
- Image’s resolution should be less than 160 x 128, and can
be divided by 4.
- Do not upload image files that size is greater than 64KB.
When you finish with above settings, click ‘Apply’ button to save changes.
3-6 Motion
This IP camera is capable to detect object’s motion, so IP camera will only
record when there’s motion and save disk storage space.
Motion detection is performed by examine the movement of objects in
rectangular motion detection area. You can define up to 3 motion
detection areas.
38
Here are the descriptions of every setup item:
Item
Description
Enable Motion Check this box to enable motion detection.
Detection
Enable
Check this box to enable this motion detection window. You can
(Window 1 to
select window 1 to 3 to enable up to 3 motion detection
Window 3)
windows. When a motion detection window is enabled, a
rectangular will appear on camera’s view, with its title on the
top.
- To move / resize a motion detection window:
Title
(Window 1 to
Window 3)
- Move: Use the mouse to drag the title text.
- Resize: Use the mouse the drag the four corners
(upper-left/right, lower-left/right) to resize it. If you only want
to adjust width or height, drag the four sidebars (top, bottom,
left, and right).
Input characters in title field to change motion detection area’s
title text so you can identify it.
Please note that you have to click ‘Apply’ button and the text will
39
change.
Percentage
Select the percentage of pixel change that will trigger motion
detection alert. Select a lower percentage so you can detect tiny
changes in motion detection area.
Sensitivity
Select the sensitivity level that will trigger motion detection
alert. Select a higher sensitivity so you can detect tiny changes in
motion detection area. It will show blue bar when window are
detecting moving object through the window range.
When you finish with above settings, click ‘Apply’ button to save changes.
Once the window detects motion, one blue flexible bar will appear at the
bottom edge. One video file will be saving at this moment if the ftp server
was enabled.
3-7 Event
When there’s an event, you can use this setup page to define what IP
camera should do, like send an Email or trigger digital output to activate
external alarm.
There are three setup pages:
1. Setting: Define a new event and manage events.
2. Media: Define what kind of media file should be saved on designate
media.
40
3. Event Server: Define the details of remote server.
Please refer to following sections for detailed instructions.
3-7-1 Settings
This page lists all existing events. You can click ‘Modify’ button to edit an
existing event, or ‘Remove’ to delete an existing event.
To create a new even, just click “New” button to add an Event setting.
41
To add a new event, click ‘New’ button and the descriptions of every setup
item is listed below:
Item
Enable Setting
Title
Motion
Detection
Enable
Schedule Time
Enable FTP
Enable EMAIL
Enable Samba
(Net Storage)
Enable SD
CARD
Description
Check this box to enable this event. If you just want to disable
this event temporarily, you can uncheck this box to keep this
event and disabling while not deleting it.
Input any description text for this event so you can identify it
quickly. You can use alphabets, numbers, and symbols
include: !$-.@^_~ (no spaces allowed).
Check this box and this event will be activated when one of
motion detection window detects motion.
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and select time from
dropdown list. If you select ‘Always’ as time, this event will be
activated during all the day.
Check this box and IP camera will save file on FTP server (refer
to ‘FTP Server’ setting in ‘Event Server’ tab) when this event is
activated.
Check this box and IP camera will send an Email to designated
recipient address (refer to ‘SMTP Server’ setting in ‘Event
Server’ tab) when this event is activated.
Check this box and IP camera will save file on samba server
(refer to ‘Samba Server’ setting in ‘Event Server’ tab) when this
event is activated.
Check this box and IP camera will save file on Micro-SD card
when this event is activated. A working Micro-SD card must be
inserted into IP camera in advance.
42
3-7-2 Media
You can define what kind of media file should be saved on designated
media.
Here are the descriptions of every setup item:
Item
Description
One Snapshot Save a picture file when event is triggered.
Maximum
Save a H.264 video clip. You can also select the recording
Video File Size length before and / or after the time when event is triggered in
‘Pre Event’ and ‘Post’ Event’.
For example, if you set ‘Pre Event’ to ‘5’ and ‘Post Event’ to 5’,
and an event is triggered at 14:10:30, then the video file will
be 10 seconds long, starting from 14:10:20 to 14:10:30.
Tips: You may want to know what happened before event is
triggered in many cases, especially when object is outside of
motion detection window.
Note: If the “Pre Event” set to “0” second, the “Post Event”
cannot set to “0” second.
When you finish with above settings, click ‘Apply’ button to save changes.
43
3-7-3 Event Server
You can define the details of remote media server: FTP (File), SMTP (Email),
and Samba (File).
A Samba server can be any computer running windows operating system
with network neighbor function enabled. Many stand-alone network file
server also support samba server function.
Enable FTP server then it will show the related items of FTP server setting.
44
Here are the descriptions of every setup item:
Item
Description
Enable FTP
Check this box to enable FTP server upload.
Server
- FTP Server: Input FTP server’s IP address or hostname.
- Port: Input FTP server’s port number. In most cases it should be
default value ‘21’.
- User Name: Input FTP server’s username.
- Password: Input FTP server’s password.
- File Path Name: Input the path where you want to save file on
FTP server, like ‘upload/record’. If you want to save file on this
FTP user’s home directory, you can leave this field blank.
- Enable Passive Mode: Check this box to force IP camera to
communicate with FTP server in passive mode (Some FTP
Server may only work when you check this box, while others
don’t).
- Test FTP: Click this button to test FTP server settings above
immediately.
Enable SMTP Server then UI shows the items as below.
45
Item
SMTP Server
Description
Check this box to enable Email send.
- SMTP Server: Input SMTP server’s IP address or hostname.
- Port: Input SMTP server’s port number. In most cases it should
be default value ‘25’.
- Sender Email Address: Input the sender’s email address that
will appear in the Email send by IP camera. This will help you to
identify the Email sent by this IP camera, and may help when
you have anti-spam software installed (you can set this Email
address to ‘White List’ in your anti-spam software)
- Receiver #1 Email Address: Input primary recipient’s Email
address. This field is required.
- Receiver #2 Email Address: Input backup recipient’s Email
address. This field is optional.
- Subject: Input Email titles that will appear in the Email send by
IP camera. This will help you to identify the Email sent by this IP
camera.
- Authentication: Check this box when authentication is required
by the Email server you’re using. You also need to input Email
server’s username and password in corresponding field.
- Requires SSL Encryption: If your Email server required SSL
encryption, check this box. Please note that some Email server
uses different port number than standard port 25 when SSL
encryption is used.
- STARTTLS: If your Email server required STARTTLS encryption,
check this box. Please note that some Email server uses
different port number than standard port 25 when STARTTLS
encryption is used.
- Test SMTP: Click this button to test SMTP server settings above
immediately.
46
Enable SMTP Server then UI shows the items as below.
Item
Description
Samba Server Check this box to enable Samba server file upload.
- Samba Server Address: Input Samba server’s IP address or
hostname.
- Path: Input the path where you want to save file on Samba
server, like ‘upload/record’. If you want to save file on this
user’s home directory, you can leave this field blank.
- User Name: Input Samba server’s username.
- Password: Input Samba server’s password.
* Username and password can NOT leave blank.*
- Test SMB: Click this button to test Samba server settings above
immediately.
Tips: Some samba server does not have username and password
check, you can just input samba server address and path to
access the file storage space.
When you finish with above settings, click ‘Apply’ button to save changes.
47
3-8 Recording to Micro SD Card
When a Micro SD card is inserted into IP camera, you can save video files
on it.
Note:
1. Be sure that the Micro SD Card format should be FAT32. The NTFS
format cannot be supported by this camera.
2. Unlink motion detection; this function will record video at specified
time period on selected weekday(s).
Here are the descriptions of every setup item:
Item
Description
Enable External
Check this box to record video on Micro-SD card.
storage Recording
Maximum Size of
Input the maximum size of every video file from 1MB to
Each File
50MB. IP camera will start a new video file when a
recording video file reaches the size limit stated here.
Recording
Define the recording schedule. You can check Sun to Sat
Schedule
boxes to represent a weekday, and specify time period in
‘From’ and ‘To’ field. Select ‘Always’ to record 24 hours in
selected weekday(s).
When you finish with above settings, click ‘Apply’ button to save changes.
48
3-9 SDHC
The IP camera module has an optional Micro-SD card slot PCBA board. The
standard module does not include this board. The UI shows the capacity is
0 MB when the module without Micro-SD card slot and memory card.
If you need the function please check the option when you place the order
of the IP camera module.
Once the module equipped Micro-SD card slot and Micro-SD card is
inserted, the UI will show the capacity of the Micro-SD card like the image
hereunder.
There are two UI pages to show the record on the Micro-SD card. They are
mapping to the setting of “Recording to SD card” and “Event” accordingly.
Click “All file” to list all files. You also can define the range and click
“Search” to sort the files needed. It shows likes the images in the next
49
page.
Set the time range then click “Search” then shows the records like below.
50
3-10 Log
You can check the usage log of IP camera here.
In this page, you can click:
1. First page / Final page: Jump to first / final page of log.
2. Previous / Next: Jump to previous or next page of log.
3. Remove: Clear log. You’ll be prompted for confirmation.
51
3-11 Device Info
You can check the information and network settings of this IP camera. The
information are very useful when you need to repair or fix the problem of
this IP camera.
An example of device info page looks like this:
52
3-12 Maintenance
You can do some maintenance job about this IP camera here.
Here are the descriptions of every setup item:
Item
Description
Reboot
Click this button to reboot the IP camera. This function is useful
when you find IP camera is not working properly.
Reset
Clear all settings of IP camera and reset to factory default setting.
Backup
Backup IP camera’s setting and save it on your computer.
Backup to
Backup IP camera’s setting and save it on Micro SD card. A Micro
Micro SD card SD card must be inserted into Micro SD card slot when you click
device
this button, or you’ll receive an error message.
Restore
Restore a previously-saved configuration file saved on your
computer. Click ‘Browse’ button to select a file on your computer
first, then click ‘Restore’ button.
Restore from
Restore IP camera’s configuration which is previously-saved on
SD card device Micro-SD card.
Upgrade
Upgrade IP camera’s firmware. Click ‘Browse’ button to select a
firmware image file on your computer first, then click ‘Upgrade’
button.
53
3-13 Language
You can change the display language of web interface.
Click ‘Language’ button and select one language. More languages may
available in latest firmware file.
54
Chapter V Troubleshooting
Please don’t panic when you found this IP Camera is not working properly.
Before you send this IP Camera back to us, you can do some simple checks
to save your time:
Problem
Possible solution(s)
description
Can’t
1) Please check the IP address of IP Camera again.
connect to 2) Please make sure the network cable is correctly
IP Camera
connected to your local area network.
3) Please make sure power cable is correctly connected to
IP Camera.
4) Please make sure IP Camera is switched on (the LED
lights on IP Camera will light up).
No IP
1) ‘Auto search’ function only works on IP Cameras located
Camera
on local area network.
found
No image
1) If the place where IP camera is installed is too dark, try
to add some lights when possible.
2) Check if there’s anything covering the lens.
RTSP URL
1) Main Stream (H.264/MPEG4)
RTSP://IP address :RTSP port/stream1
2) MJPEG
RTSP://IP address :RTSP port/stream2
3) Mobile View
RTSP://IP address :RTSP port/mobile
55
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 2.5cm (1 inch) during normal
operation.
Federal Communications Commission (FCC) RF Exposure Requirements
SAR compliance has been established in the laptop computer(s) configurations with PCMCIA
slot on the side near the center, as tested in the application for certification, and can be used in
laptop computer(s) with substantially similar physical dimensions, construction, and electrical
and RF characteristics. Use in other devices such as PDAs or lap pads is not authorized. This
transmitter is restricted for use with the specific antenna tested in the application for
certification. The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication
terminal equipment and the mutual recognition of their conformity (R&TTE). The R&TTE
Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it.
However, special attention must be paid to the dangers of electric shock and static electricity
when working with electrical equipment. All guidelines of this and of the computer
manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
56
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria,
Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also
authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not Intended for Use
None
57
EU Declaration of Conformity
English:
This equipment is in compliance with the essential requirements and
other relevant provisions of Directive 2004/108/EC.
French:
Cet équipement est conforme aux exigences essentielles et autres
dispositions de la directive 2004/108/EC.
Czechian: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými
ustanoveními směrnic 2004/108/EC.
Polish:
Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi
warunkami określonymi Dyrektywą UE 2004/108/EC.
Romanian: Acest echipament este în conformitate cu cerinţele esenţiale şi alte
prevederi relevante ale Directivei 2004/108/EC.
Russian:
Это оборудование соответствует основным требованиям и
положениям Директивы 2004/108/EC.
Magyar:
Ez a berendezés megfelel az alapvető követelményeknek és más
vonatkozó irányelveknek 2004/108/EC.
Türkçe:
Bu cihaz 2004/108/EC direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Ukrainian: Обладнання відповідає вимогам і умовам директиви 2004/108/EC.
Slovakian: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia
smerníc 2004/108/EC.
German:
Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien
2004/108/EC.
Spanish:
El presente equipo cumple los requisitos esenciales de la Directiva
2004/108/EC.
Italian:
Questo apparecchio è conforme ai requisiti essenziali e alle altre
disposizioni applicabili della Direttiva 2004/108/EC.
Dutch:
Dit apparaat voldoet aan de essentiële eisen en andere van toepassing
zijnde bepalingen van richtlijn 2004/108/EC.
Portugese: Este equipamento cumpre os requesitos essênciais da Directiva
2004/108/EC.
Norwegian: Dette utstyret er i samsvar med de viktigste kravene og andre relevante
regler i Direktiv 2004/108/EC.
Swedish:
Denna utrustning är i överensstämmelse med de väsentliga kraven och
övriga relevanta bestämmelser i direktiv 2004/108/EC.
Danish:
Dette udstyr er i overensstemmelse med de væ sentligste krav og andre
relevante forordninger i direktiv 2004/108/EC.
Finnish:
Tämä laite täyttää direktiivien 2004/108/EC oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
---------------------------------------------------------------------------------------------------------------------58
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or
general waste. It should be handed over to the applicable collection point for the
recycling of electrical and electronic equipment, or returned to the supplier for
disposal.
59
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European EMC
directive (2004/108/EC).
Equipment:
Model No.:
2M IP CAMERA BULLET
IR-112E
Report No.:
T130711D02-E
The following European standards for essential requirements have been followed:
EN 55022: 2010 (Class A)
CISPR 22: 2008 (Ed 6.0)
AS/NZS CISPR 22: 2009 with Amdt I (2010)
EN61000-3-2:2006 +A1: 2009+A2: 2009
EN61000-3-3:2008
EN 55024:2010
(IEC61000-4-2:2008
IEC 61000-4-3:2006 +A1:2007+A2: 2010
IEC 61000-4-4:2012
IEC 61000-4-5:2005
IEC 61000-4-6:2008
IEC 61000-4-8:2009
IEC 61000-4-11: 2004)
Edimax Technology Co., Ltd.
No. 3, Wu Chuan 3rd Road,
Wu-Ku Industrial Park,
New Taipei City, Taiwan
Date of Signature: September, 25, 2013
Signature:
Printed Name:
Title:
60
Albert Chang
Director
Edimax Technology Co., Ltd.
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License version 2. The program
is free software and distributed without any warranty of the author. We offer, valid for at least three
years, to give you, for a charge no more than the costs of physically performing source distribution, a
complete machine-readable copy of the corresponding source code.
Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das
Programm ist eine sog. „Free Software“, der Autor stellt das Programm ohne irgendeine
Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen Zeitraum von drei Jahren an, eine
vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu stellen – zu nicht
höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is
not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This General Public License applies to
most of the Free Software Foundation’s software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change
the software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to
ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the
recipients all the rights that you have. You must make sure that they, too, receive or can get the source
code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and passed on,
we want its recipients to know that what they have is not the original, so that any problems introduced
by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger
that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any patent must be licensed for
everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
61
0. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The ‘“Program’“,
below, refers to any such program or work, and a ‘“work based on the Program’“ means either the
Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is
addressed as ‘“you’“.
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running the Program is not restricted, and the output from the Program is
covered only if its contents constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and give any other recipients of the Program a copy of this License along
with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based
on the Program, and copy and distribute such modifications or work under the terms of Section 1 above,
provided that you also meet all of these conditions:
a)
You must cause the modified files to carry prominent notices stating that you changed the
files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be licensed as a whole at no charge to all
third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it,
when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no
warranty (or else, saying that you provide a warranty) and that users may redistribute the
program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an
announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of derivative or collective works
based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you also do one of the
following:
a)
Accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a
charge no more than your cost of physically performing source distribution, a complete
62
c)
machine-readable copy of the corresponding source code, to be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for software interchange; or,
Accompany it with the information you received as to the offer to distribute corresponding
source code. (This alternative is allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an
executable work, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything that
is normally distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place counts as distribution of
the source code, even though third parties are not compelled to copy the source along with the object
code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and
will automatically terminate your rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses terminated so long as such parties
remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants
you permission to modify or distribute the Program or its derivative works. These actions are prohibited
by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any
work based on the Program), you indicate your acceptance of this License to do so, and all its terms and
conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients’
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties
to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute the Program at all.
For example, if a patent license would not permit royalty-free redistribution of the Program by all those
who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of
the free software distribution system, which is implemented by public license practices. Many people
have made generous contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of
this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Program under this License may add
an explicit geographical distribution limitation excluding those countries, so that distribution is
63
permitted only in or among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License
from time to time. Such new versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this
License which applies to it and ‘“any later version’“, you have the option of following the terms and
conditions either of that version or of any later version published by the Free Software Foundation. If
the Program does not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of
our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM ‘“AS
IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
64
65
Download PDF