BRK P1200 Low Profile Battery Powered Photoelectric Smoke Alarm Specification
Advertisement
Advertisement
S M O K E
A L A R M
P H O T O E L E C T R I C
CAT.
PR700 Series
9V Battery Powered
LOW PROFILE DESIGN
Sleek, contemporary design blends into any décor.
PHOTOELECTRIC
Photoelectric technology is generally more sensitive at detecting large particles, which tend to be produced in greater amounts by smoldering fires.
SILENCE FEATURE
Silences nuisance alarms.
TAMPER RESISTANT
Locks alarm to mounting bracket to prevent removal of battery and/or alarm. Perfect for apartment, dormitory or hotel applications.
9V BATTERY
INCLUDED
Description:
BRK PR700 (model P1200) is a single station smoke alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined in standard
NFPA 101. BRK PR700 has been fully tested and complies with, UL217, CSFM,
NFPA 72, and NFPA 101 and other agencies that model their codes after the above agencies. It meets building codes where battery operated smoke alarms with silence are required and with model building codes published by the ICC.
BRK PR700 is a state of the art smoke alarm designed to provide early warning of a fire. It features a fully insect screened Photoelectric smoke sensing chamber, an 85dB horn, a supervised 9V battery power supply, a full function test switch, a silence feature to silence unwanted nuisance alarms, a red LED light that indicates
DC power or alarm. It also features a tamper resistant locking pin that locks alarm to the mounting bracket to prevent removal of battery or alarm. Perfect for apartment, dormitory or hotel applications. The sleek, low profile design complements any décor. When voltage drops to a pre-set warning level, the horn will “chirp” approximately once per minute to indicate a fresh battery is needed. Designed for wall or ceiling mounting. Includes mounting anchors and screws.
Available in the following versions:
PR700B Silence with Carbon Zinc Battery
PR700AB Silence with Alkaline Battery
PR700LB Silence with Lithium Battery
Listed to
UL 217
Standard
CAT.
PR700 Series
TOP VIEW
5.2”
SIDE VIEW
1.13”
ARCHITECTURAL AND ENGINEERING SPEC
MOUNTING
BRACKET
The smoke alarm shall be a BRK Model P1200 (cat. no. PR700) and shall provide at a minimum the following features and functions:
1. A photoelectric smoke sensing chamber.
2. The unit shall be capable of self restoring.
3. A fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms.
4. Powered by a replaceable 9V battery and a solid state piezo horn rated at 85dB at
10 ft.
5. A visual LED power-on indicator to confirm unit is receiving power or is in alarm.
6. A full function test button. The test button should check all alarm functions by stimulating the chamber to simulate a smoke condition, causing the unit to alarm.
Model P1200 also has a silence feature to silence unwanted nuisance alarms.
7. A tamper resistant locking pin that locks alarm to the mounting bracket to prevent removal of battery.
8. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 90%.
9. The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.
10. The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72,
NFPA 101, ICC.
TECHNICAL SPECS
Alarm Dimensions: 5.2”Dia. x 1.13”H
Weight: 6.0 oz
Operating Voltage: 9V Battery Powered
Temperature Range: 40°F (4°C) to 100°F (38°C)
Humidity Range: 10% to 95% relative humidity (RH)
Audio Alarm:
Test/Silence:
85dB at 10 feet
Electronically simulates smoke condition, causing the unit to alarm. Press and hold test/silence button.
Alarm Reset:
Smoke Sensor:
Automatic when smoke clears
Photoelectric
Indicator Lights/Sounds:
DC Power: Intermittent Red LED
Local Alarm:
Listing:
Audio alarm and rapidly flashing Red LED
Listed to UL217 Standard
SHIPPING SPECS
Individual Carton Dimensions 5.31 ”L x 1.38”D x 5.31”H
Weight
Cube
UPC
Master Carton Dimensions
Master Pack
Weight
Cube:
I2of5:
Pallet Information
Cases per Layer
Number of Layers:
Cases per Pallet:
INSTALLATION OF ALARM
Installation of this smoke alarm must conform to NFPA 72. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual in sections titled “Recommended Locations for Smoke Alarms” and “Locations to Avoid for
Smoke Alarms”.
Units per Pallet:
Cube:
Weight:
THE PARTS OF THIS ALARM
2
7
3
6
36
8
288
1,728
55.4 ft3
972 lbs.
0.46 lbs.
0.02 ft3
PR700B: 0 29054 01444 3
PR700AB: 0 29054 01495 5
PR700LB: 0 29054 01496 2
8.88 ”L x 5.63”W x 5.88”H
6
3.2 lbs.
0.17 ft3
PR700B: 500 29054 01444 8
PR700AB: 600 29054 01495 7
PR700LB: 600 29054 01496 4
4
6
1
1. Test/Silence button
2. LED alarm light
3. Install 9V battery here
4. Locking tab slot (Break out Tab)
5. Mounting bracket
6. Mounting Slots
7. Horn brkelectronics.com
4
5
©2014 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM3205

Public link updated
The public link to your chat has been updated.
Advertisement