Samsung | SCH-U350 | User manual | Samsung SCH-U350 User manual

SCH-U350 Series
P O R T A B L E
M O B I L E
D U A L - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein Rd.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel:
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungtelecom.com/support
GH68-24320A
U350.02_CG12_CB_072209_F5
Printed in Korea.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
Nuance®, VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..............................................4
Navigate Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Section 5: Understanding Your Contacts .................... 25
Section 2: Understanding Your Phone ...........................8
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . 9
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 12
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Section 3: Call Functions ............................................. 16
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 16
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 17
Making a Call — Quick Search Dialing . . . . . . . . . . . . . . . . . . 18
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 18
Responding to a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
The In-Use Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Section 4: Menu Navigation ......................................... 24
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1
Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 25
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 29
Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Contacts Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Sending a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Section 6: Entering Text ............................................... 38
Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 38
Entering Text in Alpha (Abc) Mode . . . . . . . . . . . . . . . . . . . . . 39
Entering Text in T9 Word Mode . . . . . . . . . . . . . . . . . . . . . . . 39
Entering Upper and Lower Case Letters . . . . . . . . . . . . . . . . . 40
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Entering Emoticons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Section 7: Messaging ................................................... 42
Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 42
Message Send Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
48
51
52
Section 8: Alltel Shop ................................................... 54
Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Section 9: Alltel Web .................................................... 55
Launching Alltel Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Alltel Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Alltel Web Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
55
56
56
Section 10: Camera ...................................................... 57
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57
59
60
60
63
65
66
Section 11: Multimedia ................................................ 67
Using My Images Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using My Ringtones Gallery . . . . . . . . . . . . . . . . . . . . . . . . . .
Using My Sounds Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
67
68
69
Section 12: Tools .......................................................... 72
Accessing Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . 72
Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
72
76
79
81
82
83
84
85
85
88
Section 13: Change Your Settings ............................... 89
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Section 14: Phone Info ............................................... 102
Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Icon Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Section 15: Health and Safety Information ............... 103
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . 103
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 104
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . 104
2
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 105
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Using Your Phone Near Other Electronic Devices . . . . . . . . . 114
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Other Medical Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 116
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 118
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 119
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 120
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Section 16: Warranty Information ............................. 123
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 123
End User License Agreement for Software . . . . . . . . . . . . . . 126
Index ............................................................................ 131
3
Section 1: Getting Started
This section explains how to start using your Samsung SCH-u350
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 131.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 103.
Notes and Tips
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu,
or sub-menu.
• Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight Use the Navigation key (
) to move a highlighting
effect onto a menu item or screen item of interest.
select
➔
After “highlighting” a menu item or screen item,
press the OK key (
) to launch, access, or save a
highlighted menu item or screen field of interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings ➔ Call Settings ➔ Call Answer...”
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Getting Started
4
Use the Travel Adapter
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1.
Low battery indicator
Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Five bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Incorrect
+
Correct
2.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector at the bottom end of your
phone.
5
Contact your Wireless Provider and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
1.
Insert the top end of the
Remove the Battery
1.
2.
Press down on the battery
cover release latch (1) and slide
the cover (2) toward the bottom
the gold contacts on the
end of the phone.
inside of the battery to
2.
to turn off
the phone (if on).
battery first, matching
those on the phone.
Press and hold
3.
Lift the battery (3) up and
Press lightly on the
away from the phone,
bottom end of the battery
bottom end first.
down into the phone until it slips into place.
3.
Place the battery cover over
the battery and slide the
battery cover into place.
Getting Started
6
Turn Your Phone On
1.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Open the flip on your phone, as
shown.
2.
Press
Setting Up Your Voicemail
.
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: As with any other radio-transmitting
device, do not touch the antenna while
using your phone as this can affect call
quality and can cause the phone to
operate at a higher power level than is
necessary.
3.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
The phone begins searching for a
1.
network signal.
4.
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
Once the phone finds a signal,
Press
2.
the time, date, and day appear in
the second line of the display.
Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
1.
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting.
Turn Your Phone Off
2.
You are prompted to enter your password.
䊳
Press and hold
powers off.
7
for two or more seconds. Your phone
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
• Domestic and international voice and text messaging service (available
on participating networks).
• High speed data (CDMA 2000 1x Technology)
• Bluetooth® Wireless Technology (see Note)
• Global Positioning (GPS) Technology
• PIM Functions
• Picture (MMS) Messaging
• Text (SMS) Messaging
• E-mail Messaging
• Built-in VGA Digital Camera
• Voice Dial
Note: The SCH-u350 phone supports the wireless Headset, Handsfree,
Object Push, and File Transfer profiles for Bluetooth® wireless
technology. The u350 does not support Bluetooth OBEX profiles.
Features
1.
Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
2.
Camera Lens — The lens of your built-in camera.
Understanding Your Phone
8
3.
Front Display — Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on.
4.
Headset Connector — Used to connect a wired headset or
TTY/TDD device to your phone. (For more information,
refer to “TTY Mode” on page 95.)
5.
Camera Key — Press and hold to launch the Camera
feature of your phone and take pictures, with the phone
open or closed.
6.
Speakerphone Key — Press and hold to turn Speakerphone
mode On and Off. (For more information, refer to
“Speakerphone Mode” on page 15.)
7.
Power / Accessory Connector — Used to connect charging
accessories or any available accessory cables to your
phone.
9
Open View (Front) of Your Phone
Features
1.
Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
2.
5.
6.
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
OK Key — Pressing when navigating through a menu
phone.
11. END Key — Ends a call. If you press and hold the END key,
Left Soft Key — Used to navigate through menus and
the power goes On or Off. When you receive an incoming
applications and to select the choice indicated at the
call, press to send the call to voicemail.
12. Right Soft Key — Used to navigate through menus and
SEND Key — Lets you place or receive a call. In standby
applications and to select the choice indicated at the
mode, press the key once to access the recent call log.
bottom right corner of the Main Display.
Voicemail Key — Lets you speed dial your Voicemail
13. Navigation Key — In Menu mode, lets you scroll through
account to review your voice messages.
the phone menu options. In Standby mode, lets you access
Special Function Keys — Enter special characters. Perform
preset functions and one user-defined function.
various functions.
7.
letters, and characters.
10. CLR Key — Deletes characters from the display when you
strength, and so on.
bottom left corner of the Main LCD.
4.
Alpha-numeric Keys — Use these keys to enter numbers,
status icons, message indicators and contents, signal
accepts the highlighted choice in a menu.
3.
9.
Microphone — Lets the other caller hear you clearly when
14. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
you are speaking to them.
8.
Voice Recognition Key — Used to launch VoiceSignal voice
recognition system.
Understanding Your Phone
10
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, Left (
) and Right
( ).
Left Soft Key
Some functions of the Left soft key ( ) are as follows:
• In standby mode, press the Shop soft key ( ) to launch the Alltel
Shop screen. (For more information, refer to “Alltel Shop” on
page 54.)
• When the Left soft key function is Edit, press the Edit soft key ( ) to
edit a Contacts entry.
Right Soft Key
Some functions of the Right soft key ( ) are as follows:
• In standby mode, press the Messages soft key ( ) to launch the
Messages menu.
• When the Right soft key function is Options, press the Options soft key
( ) and a pop-up menu appears.
• When the Right soft key function is Back, press the Back soft key ( )
to back up one menu level.
OK Key
• In standby mode, press the OK key (
) to launch the Main Menu.
• In a menu, press
to accept the highlighted selection.
11
• In camera mode, press
to take a photo or to create a Picture
message.
• When the OK key function is Edit, press the Edit key (
) to edit a
Draft message.
SEND Key
The SEND key ( ) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to
and from your phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch back to
the other call.
CLR Key
The CLR key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
• If you enter an incorrect character, briefly press
to backspace
(and delete) the character.
• To erase the entire sentence, press and hold
.
• To back up one menu level, briefly press
.
END Key
• Press and hold the END key (
) to turn your phone on or off.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the
last input.
Understanding the Display Screen
1.
display shows icons that indicate
network status, battery power,
signal strength, connection type,
Navigation Key
Use the directional keys on the Navigation key (
) to
browse menus, sub-menus, and lists. Each directional key also
acts as a shortcut to launch applications.
and more.
2.
Camera Key
Use the Camera key (
) on the right side of the phone to
activate the camera built into your phone and to take pictures.
Speakerphone Key
Use the Speakerphone key (
) on the right side of the phone
to enable or disable Speakerphone mode.
The second line of the display
can show additional icons, such
as the Auto Answer icon shown in this screen sample.
Volume Key
Use the Volume key (
) on the left side of the phone
to adjust ringer volume (in standby mode), to adjust voice call
volume (during a call), and to browse menu items.
The top line of your phone’s
3.
The center portion of the display shows information such
as call progress information, messages, and photos.
4.
The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key (
the OK key (
) will display the Alltel Shop screen, pressing
) will display the Main Menu, and pressing
the Right soft key (
) will show the Messages menu.
Display Screen Icons
Your u350 phone can show you definitions of the icons that
appear on the top line of the display.
Understanding Your Phone
12
To access the Icon Glossary:
䊳
In standby mode, select Menu ➔ Phone Info ➔ Icon
Glossary. A list appears showing the icons that can appear
on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
– Example: “Save Message?”
• Reconfirm
– Example: “Erase All Messages?”
• Performing
– Example: “Sending...” “Connecting...”
• Completed
– Example: “Message Saved”
• Information
– Example: “New Message”
• Error
– Example: “System Error!”
• Warning
– Example: “Low Battery,” “Memory Full!”
13
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight setting.
(For more information, refer to “Backlight” on page 91.)
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except
or
, by pressing only the
key, or by opening the
phone’s flip. (For more information, refer to “Call Answer” on
page 94.)
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key
(
), then choose the input mode from the pop-up menu using
the Navigation key. Optional input modes are T9 Word, Abc, ABC,
Symbols, and 123. (For more information, refer to “Text Entry
Modes” on page 38.)
key to display a list of menu options. (For more information, refer
to “The In-Use Options Menu” on page 20.)
Tip: You can cycle between T9 Word, Abc, and 123 by repeatedly pressing
and holding the
key until the phone beeps.
Enter/Exit Silent Mode
Standby Mode
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
To enter Silent Mode:
In standby mode, you will see the time, day, and date as well as
all phone status icons.
then press SET (
In standby mode, enter a phone number, and press
(
to
䊳
Press
) Down until “Silence All” appears in the display,
).
While your phone is in standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
) Up until “Silence All”
disappears from the display and the desired ringer value
to return to standby mode.
Receive Messages in Standby Mode
While in Silent mode and standby mode, repeatedly press
the Volume key (
place a call.
2.
In standby mode, repeatedly press the Volume key
To exit Silent Mode:
Place Calls in Standby Mode
1.
䊳
appears, then press SET (
).
Vibrate Mode
䊳
In standby mode, repeatedly press the Volume key
(
) down until “Vibrate” appears in the display,
then press SET (
).
Note: The Volume key is on the left side of phone.
Understanding Your Phone
14
Adjust the Ringer
• Exiting Camera Mode — Press the
To adjust the Ringer volume, while in standby mode, press the
Volume key up or down.
1.
In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
• Silence All
• Alarm Only
• Vibrate
2.
• 1 Beep
• Low
• Low/Medium
• Medium
• Medium/High
• High
When you are satisfied with the setting, press SET (
Press and hold the Speakerphone key (
) until
“Speaker On” appears in the display.
).
Your phone returns to standby mode.
Note: The Vibrate icon (
) appears in the display when the phone is in
Vibrate mode. The No Ring icon ( ) appears in the display when the
phone is in Silence All mode.
Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures. (For more information, refer to
“Camera” on page 57.)
• Entering Camera Mode — In standby mode, press and hold the
Camera key (
), on the right side of the phone, then select
Take Photo.
15
Lets you use your phone handsfree or to share a call with other
people nearby.
• To place your phone in Speakerphone Mode:
䊳
Options are:
key.
Speakerphone Mode
Caution!: Keep the phone away from you ear while in Speakerphone Mode.
(For more information, refer to “Responsible Listening” on
page 112.)
• To disable Speakerphone Mode:
䊳
Press and hold
display.
until “Speaker Off” appears in the
Section 3: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
Making a Call — Number Entry Dialing
1.
With the phone on, enter the number you wish to call using
the keypad.
2.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Press
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
to place the call.
Dialing Emergency Numbers
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
1.
With the phone on, enter 911 using the keypad.
2.
Press
to place the call.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Note: You can specify other numbers than 911 as emergency numbers using
the Emergency # settings. (For more information, refer to “Emergency
#” on page 98.)
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number. You
can use special “pause” characters to let you enter the phone
number and a password or account number in a single string
before pressing
.
Tip: Instead of manually entering the passwords or account numbers each
time you call an automated system, you can store the numbers in your
Contacts along with pauses.
Call Functions
16
1.
Enter the number you wish to call, then press the Options
soft key. The following options appear in the display:
• P Pause — a hard pause (waits for input from you followed by
pressing
).
• T Pause — a four-second pause.
Tip: You can create pauses longer than four seconds by entering multiple T
Pauses.
2.
Press
to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
dial) numbers for your contacts. (For more information, refer to
“Assigning Speed Dial Numbers” on page 31.)
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
17
Example: For Speed Dial number 003, press and hold
until the name
and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 099 are special Two-Touch
dialing locations.
Select the desired pause to enter it into your number
sequence.
3.
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Example: For Speed Dial number 013, briefly press
, then press and hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For Speed Dial number 113, briefly press
, briefly press
again, then press and hold
until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (four-second) T Pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) P Pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and press
your dialing sequence.
to continue
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored in your
Contacts list by pressing the number keys that correspond to the
first few letters of a Contact name.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any telephone number not
stored in your contact list by speaking the individual digits in the
number (Digit Dialing).
Voice Dialing Tips:
Note: For information on activation, see “Quick Search” on page 100.
• Wait for the beep before speaking.
Quick Search Dialing a Contact
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
To find and dial a Contact, do the following:
1.
• When saying a name, say the first name then the last name.
In standby mode, press the number keys that correspond
1.
to the first few letters of the Contact name, as shown.
2.
3.
Highlight the desired Contact name, then press
pronounced through the earpiece.
2.
to call
Your u350 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Say, “Call”.
You are prompted to “Say the name or #”.
the number.
Making a Call — Voice Dialing
key.
“Say a Command” appears in the display and is
Press the Up navigation key. The Contact list Find screen
appears showing the desired Contact name.
In standby mode, press and hold the
3.
For a number:
• Speak clearly and say the telephone number of the person you
want to call. For example, say “7 8 1 5 5 5 9 2 0 0."
Call Functions
18
If it recognizes the digits, Voice Dial repeats and dials the number. If
Voice Dial is not sure it has recognized the digits, it displays a choice list
of up to three numbers and prompts you with “Did you say?” followed
by the first number on the list.
• Say “Yes” to confirm the name or “No” to hear the next name, or
use the keypad to select the correct name from the list. (For more
information, refer to “Choice Lists” on page 73.)
4. For a Contact:
• Speak clearly and say the name of the entry in your Contacts list,
first name followed by last name (if any).
– If the name is recognized, Voice Dial repeats the name and dials the
number.
– If Voice Dial is not sure which name you said, it displays a choice list of
up to three names and prompts you with “Did you say?” followed by the
first name on the list.
• Say “Yes” to confirm the name or “No” to hear the next name, or
use the keypad to select the correct name from the list. (For more
information, refer to “Choice Lists” on page 73.)
– Press the Repeat soft key to say the name again.
– Press
to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it (that is,
Home, Work, Mobile, and so on), Voice Dial displays the possible
choices and prompts you with “Which number?”
• Say one of the following number types:
– “Home”
19
– “Work”
– “Mobile”
Voice Dial dials the specified number.
Responding to a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including: Silence All, Alarm Only,
Vibrate, 1 Beep, Low, Low/Medium, Medium, Medium/High, or
High, and/or different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the
following events occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voicemail.
Answering an Incoming Call
䊳
Press the
key. The ring tone and/or vibration stop and
the caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
. (For more information, refer to “Call Settings” on
page 94.)
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
䊳
During an incoming call, press the Ignore soft key. The
caller is forwarded to your voice mail.
The In-Use Options Menu
Note: If the call is disconnected while accessing the In-Use Options menu,
the In-Use Options menu disappears from the display and the phone
returns to standby mode.
While in a call, press Options (
Tip: You can block sound going to the other party(ies) on this call by pressing
the Mute / Unmute soft key. This can reduce noise on conference calls.
You can launch Speakerphone mode to conduct this call hands-free by
pressing Options ➔ Speakerphone.
Adjusting the Call Volume
You can access numerous menus and features during a call.
1.
• Connect Bluetooth — Connects a Bluetooth device, such as a
headset, in place of the phone’s earpiece and microphone.
• Speakerphone — Enables Speakerphone mode to share the call
with others nearby.
2. Select a menu option or press
to exit the menu.
). The following menu
items appear in the display:
• Contacts — The Contacts Find screen appears in the display.
• Call History — View, respond to, and manage your recent
outgoing, incoming, and missed calls.
• Message — The Messages menu appears in the display. (For
more information, refer to “Messaging” on page 42)
During a call, repeatedly press the Volume key (
) — left
side of the phone — up or down until the desired Voice Calls
volume level appears in the display and is heard from the
earpiece.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed voice calls and about data calls. You can also view times
for your last call and the time totals for all calls.
Note: In cases where there is a Contacts match for a Calls log entry, the
Contact name appears in the display instead of the number.
Call Functions
20
Review the Outgoing / Incoming / Missed / All Calls Log
4.
Press the Msg soft key. The following options appear in
the display:
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
1.
• Text Message — Lets you send a text message to the selected
number called.
• Picture Message — Lets you send a picture message to the
selected number called.
In standby mode, press Menu, then select Calls ➔
Outgoing / Incoming / Missed / All Calls. A list of your
outgoing calls appears in the display.
2.
To view information about a call, select it.
3.
Press the Options soft key. A pop-up menu containing the
Note: For more information, refer to “Creating and Sending New Messages”
on page 42.
5.
following options appears in the display:
• Save — Save the number to your Contacts.
• Details — Calls to Contacts Only — Shows the entry for the called
Contact.
• Erase — Erase the selected call from your Outgoing call log.
• Lock/Unlock — Protect the selected call from being erased.
• Erase All — Erase all calls from your Outgoing call log.
• View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
Select an option to perform its function.
Data Calls
Your phone retains information about the last 90 data calls and
stores them in the Data call log. You can review the Data call log
for the time, date, and duration of a data call, as well as other
information.
1.
In standby mode, press Menu, then select Calls ➔
Data Call. A list of your data calls appears in the display.
2.
To view information about a call, select it.
3.
Press the Options soft key. A pop-up menu containing the
following options appears in the display:
• Erase — Erase the selected data call from your Data Call log.
21
• Lock / Unlock — Protect the selected data call from being
erased.
• Erase All — Erase all calls from your Outgoing call log.
• Data Counter — Shows the total data Transmitted during the call,
Received during the call, Total data transmitted and received during
the call, the date and time the Data Counters were last reset, and
the Lifetime Data Counter.
4. Select an option to perform its function.
Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
• Roaming Calls — View the total calls duration on your phone
while roaming since the last reset.
• All Calls — View the duration of the total call, incoming, outgoing,
and data calls made with or recieved by your phone since the last
reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Calls — View the duration of all calls since your phone
was activated.
Note: Although Total call timers can be reset to 0, the Lifetime Calls timer
can never be reset.
2.
Calls), highlight it and press the Reset soft key.
Note: Call Timer is not for billing purposes.
1.
In standby mode, press Menu, then select Calls ➔
Call Timer. The following options appear in the display:
• Last Call — View the duration of your last call.
• Outgoing Calls — View the duration of the total outgoing calls
made with your phone while within your Wireless Provider’s
network and since the last reset.
• Incoming Calls — View the duration of the total incoming calls
received by your phone while within your Wireless Provider’s
network and since the last reset.
To reset a single counter (except Last Reset and Lifetime
3.
To reset all counters except Lifetime Calls, press the Reset
All soft key.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Data Counter is not for billing purposes.
1.
In standby mode, press Menu ➔ Calls ➔ Data Counter.
Call Functions
22
The following options appear in the display:
• Transmitted — View the total amount of data transmitted by your
phone since the last reset.
• Received — View the total amount of data received by your phone
since the last reset.
• Total — View the total amount of data sent or received by your
phone since the last reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
Note: Although Total data counters can be reset to 0, the Lifetime Data
Counter can never be reset.
2.
To reset a single counter (except Last Reset and Lifetime
Data Counter), highlight it and press the Reset soft key.
3.
To reset all counters except Lifetime Data Counter, press
the Reset All soft key.
Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon ( )
23
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
• Home only — Your phone is available for normal operation only in the
designated coverage area.
• Automatic-A — Your Wireless Provider’s Preferred Roaming List (PRL)
of networks is used to acquire service. If no preferred networks are
found, any digital “A” system is acquired.
• Automatic-B — Your Wireless Provider’s PRL is used to acquire
service. If no preferred networks are found, any digital “B” system is
acquired.
Note: For more information, refer to “System Select” on page 100.
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of the menus available with your phone.
Alltel Web
Menu Navigation
Access menus using the Menu key ( ), the Navigation key
(
), the soft keys (
), or a shortcut.
1.
In standby mode, press Menu (
Music
). The Main Menu
Contacts
appears in the display.
2.
Use the Navigation key (
3.
Press
) to browse phone menus.
to access a menu or sub-menu highlighted in
the display.
Return to the Previous Menu
Press
or Back (
Wallpaper
) to return to the previous menu.
Using Menu Item Number Shortcuts
You can also access menus and sub-menus using menu item
numbers. This method is often called a “shortcut.” To shortcut to
a menu or sub menu, press Menu ( ), then enter the menu
and/or sub menu number(s) for the feature in question.
1.
In standby mode, press the Navigation key Up/Down/Left/Right
(as illustrated below) to launch a corresponding function, feature,
or application.
). The main menu
appears in the display.
Navigate Using Shortcuts
Navigation Key Shortcuts
In standby mode, press Menu (
2.
Press the number of the menu, sub menu, and so on to
arrive at the desired feature.
Example: Pressing Menu ➔ 8 ➔ 5 ➔ 3 takes you to your phone’s Language
setting.
Menu Navigation
24
Section 5: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
Your Contacts List
Each phone number can be up to 32 digits in length, including
pauses. Contact names can be up to 32 characters in length. You
can also specify a memory location for each entry, and you can
restrict access to the Contacts list to prevent unauthorized use.
Tip: Speed Dialing allows you to call numbers stored in your Contacts list
faster. (For more information, refer to “Making a Call — Speed Dialing”
on page 17.)
) and select Contacts.
The following Contacts sub-menus and options appear in
the display:
25
1.
From the Contacts menu, select Add New Contact. The New
Contact screen appears in the display with the Name field
highlighted.
2.
Enter a name or phrase to associate with the type using
the keypad. (For more information, refer to “Entering Text”
on page 38.)
3.
4.
Highlight each field.
Enter a phone number (Mobile, Home, Work, or Mobile 2) or
an e-mail address (E-Mail) for the new Contacts entry.
Access the Contacts Menu
In standby mode, press Menu (
You can add an new entry to your Contacts list or add information
to an existing entry.
Using the Add New Contact Option
Your Contacts list can store up to 1000 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
䊳
Adding a New Contacts Entry
5.
If desired, assign the new Contact to a Group. This lets you
send messages to and find this Contact and other related
contacts. (For more information, refer to “Renaming a
Contacts Group” on page 35.)
6.
7.
If desired, select a unique Ringtone and/or MsgRingtone to
2.
display showing the following options:
“Ringer Type” on page 92.)
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
If desired, enter an additional phone number (Fax) or email address (E-Mail 2) for the new Contacts entry.
8.
If desired, select an identifying image by highlighting the
photo ID field and pressing the Set soft key. The My Images
screen appears in the display. (For more information, refer
to “Using My Images Gallery” on page 67.)
9.
Press SAVE (
Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.
Creating a new Contacts entry:
3.
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
After you press
to end your call, the call time, length
of call, phone number, and name of the other party (if
available) appear in the display.
Select Create New. The following (number type) icons
appear in the display:
) to save the new Contacts entry.
Saving a Number from a Call
1.
Press the Save soft key. The Save screen appears in the
identify this new Contact. (For more information, refer to
4.
Mobile
Home
Mobile 2
Fax
Work
Select the number type that matches your new entry. The
New Contact screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
entry, see “Using the Add New Contact Option” on
page 25.)
Understanding Your Contacts
26
Storing Number from a Calls Log
Adding the number to an existing Contacts entry:
5.
Use the navigation keys to highlight Update Existing, then
press
. The Update Existing screen appears in the
display showing your current Contacts list.
6.
You can store numbers from the Calls logs to your Contacts.
1.
In standby mode, press Menu (
2.
Select from the following Calls logs:
Enter the first few characters of the Contacts entry name
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
A list of your calls appears in the display.
under which you will store the saved number. (For more
information on finding a Contacts entry, see “Using the Add
New Contact Option” on page 25.)
7.
Select the desired Contacts entry. The following (number
type) icons appear in the Update Existing screen:
Mobile
Home
Work
), then select Calls.
3.
4.
Highlight the number you wish to store in Contacts.
Press the Options soft key and select Save. The following
options appear in the display:
Mobile 2
8.
Fax
Select the appropriate unassigned number type. The Edit
Contact screen appears in the display.
9.
Make any added changes you wish to the Contacts entry.
(For more information, refer to “Editing an Existing Contact
Entry” on page 29.)
10. Press SAVE (
27
) to save the entry.
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
5. For more information on saving the number, see “Saving a
Number from a Call” on page 26.
Finding a Contacts Entry
4.
Voice Method
name, or use the keypad to select the correct name from
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
In standby mode, press and hold
for Voice Service.
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
the list. (For more information, refer to “Choice Lists” on
page 73.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press
.
5. The contact information for the name you selected appears
in the display.
To look up information for a specific contact:
1.
Say “Lookup”.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
1.
VoiceSignal prompts you to “Say the name or #.”
3.
Say “Yes” to confirm the name or “No” to hear the next
• Press Menu ( ) and select Contacts ➔ Find.
• Press the Navigation key Down.
The FIND screen appears in the display with an
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
In standby mode, do one of the following:
alphabetical list of Contacts showing.
2.
Enter the first few characters of the name of the contact as
it appears in your Contacts list.
Understanding Your Contacts
28
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3.
When the desired Contacts entry is listed in the display,
This option lets you find a Contacts list entry by one of its phone
numbers.
1.
In standby mode, enter the first few numbers of the
highlight the contact using the navigation keys (if
Contacts list entry you wish to find (such as the area code
necessary). Then, do one of the following:
or area code and exchange — for example, 888-987).
• To dial the number associated with the named Contact, press .
• To change the information about the contact, press the Edit soft
key.
• To show information about the contact, press VIEW ( ).
• To access other options, press the Options soft key. The following
options appear in the display:
– New Contact — Lets you add a new number to your Contacts list or to
the selected contact.
– Erase — Lets you delete the highlighted contact.
– Send Message — Lets you send a text or picture message to the
selected contact.
– Call — Lets you place a call to the highlighted contact.
– Send Name Card With Bluetooth — Lets you send a Name Card
containing the selected Contact’s information to another Bluetooth
device.
29
– Set as/Remove Speed Dial — Lets you assign a speed dial number
to a contact. You can select the number by either entering it in the Go To
box or by using the Navigation key, then press
to set the number.
Search by Number
2.
Press the Options soft key, select the Search option. The
FIND screen appears in the display listing all phone
numbers in your Contacts list that contain the entered
digits.
3.
Highlight the desired Contacts entry. Then do one of the
following:
• To dial the highlighted number, press .
• To display information about the Contacts entry associated with the
highlighted number, press VIEW ( ). From the View Contact
screen, you can erase or edit the selected Contacts entry.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
seconds and then automatically sends the remaining digits.
Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
Tip: You can enter multiple four-second pauses to extend the length of a
pause. For example, two consecutive four-second pauses cause a total
pause time of eight seconds.
3.
Highlight a number stored in this contact entry.
4.
To backspace and delete numbers, press
5.
To clear all numbers in the highlighted field, press and hold
.
.
When you’re finished editing the entry, press
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
Note: You can also add numbers (such as a Fax number) to the entry, assign
it to a Group, and add other information.
6.
from you.
• T pause — A four-second pause stops the calling sequence for four
page 28.)
2.
• P pause — A hard pause stops the calling sequence until further input
. Your
changes are saved and a confirmation message appears in
the display.
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
1.
In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
2.
Press the Options soft key. The following pause options are
available:
• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a four-second pause.
3. Select the pause option of your choice to enter it into your
number sequence.
Understanding Your Contacts
30
4.
When you’re finished entering the number and pauses,
6.
press the Save soft key to store the number in your
Contacts.
highlighted pause into your number sequence.
7.
Add Pauses to an Existing Contacts Entry
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 28.)
2.
Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
When you’re finished entering pauses, press
to save
your changes to the number in your Contacts list.
Assigning Speed Dial Numbers
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options popup menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
3.
Highlight a number stored in this contact entry.
4.
Use the Left and Right navigation keys to place the cursor
(For more information, refer to “Finding a Contacts Entry”
where you want to add a pause (usually at the right-hand
on page 28.)
end of the number).
5.
Press the Options soft key. The following menu options
appear in the display:
• Set Speed Dial / Remove speed dial — lets you assign or remove
a Speed Dial number for this Contacts entry.
• Set as default — your phone automatically dials this number when
you find this Contacts entry and press the
key.
• P pause — a hard pause (awaits input from you).
• T pause — a four-second pause.
31
Select the pause option of your choice to enter the
1.
2.
Find and highlight the desired entry in the Contacts list.
Do one of the following:
Using the Options soft key:
3.
Press the Options soft key. The following menu options
appear in the display:
• New Contact — Lets you add a new number to your Contacts list
or to the selected contact.
• Erase — Lets you delete the highlighted contact.
• Send Message — Lets you send a text or picture message to the
selected contact.
• Call — Lets you place a call to the highlighted contact.
• Send Name Card With Bluetooth — Lets you send a Name Card
containing the selected Contact’s information to another Bluetooth
device.
• Set as Speed Dial — Lets you assign a speed dial number to a
contact. You can select the number by either entering it into the Go
To box or using the navigation keys, then press
to set the
number.
4. Select Set as Speed Dial. The Speed Dial menu appears in
the display.
5.
6.
Select an unassigned Speed Dial number to assign it to the
Press the Options soft key. The following menu options
appear in the display:
• Set Speed Dial / Remove speed dial — lets you assign or remove
a Speed Dial number for this Contacts entry.
• Set as default — your phone automatically dials this number when
you Find this Contacts entry and press .
• P pause — a hard pause (awaits input from you).
• T pause — a four-second pause.
10. Select Set as/Remove Speed Dial. The Speed Dials screen
appears in the display. (If a speed dial number has been
assignment.
set previously, you can remove it by pressing
Press the Yes soft key to assign the selected Speed Dial
has been set, continue with the next step.)
Using the Edit soft key:
Press the Edit soft key. The Edit Contact screen appears in
the display with the Contact name highlighted.
8.
9.
selected Contact. You are prompted to confirm the
number.
7.
Note: If a Contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you speed dial that Contact.
Highlight a number stored in this Contact entry.
. If none
11. Select an unassigned Speed Dial number to assign it to the
selected Contact. You are prompted to confirm the
assignment.
12. Press the Yes soft key to assign the selected Speed Dial
number. The Edit Contact screen appears in the display.
13. Press
to save the new Speed Dial number assignment.
Understanding Your Contacts
32
Add a Number or E-Mail Address to an Existing Entry
1.
information, refer to “Finding a Contacts Entry” on
page 28.)
2.
Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3.
Highlight a number field or the E-Mail field in this Contacts
entry.
4.
Enter the phone number or e-mail address for the new
Contacts entry.
5.
Press
to add the number or E-Mail address to the
existing entry.
Edit an Existing E-Mail Address
1.
Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 28.)
2.
Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3.
Highlight the E-Mail or E-Mail 2 field (labeled with the @
symbol).
33
4.
Use the keypad to edit the e-mail address. (For more
information, refer to “Entering Text” on page 38.)
Find the desired entry in the Contacts list. (For more
• To insert the @ symbol, do the following:
– Press the Left soft key. A pop-up menu appears in the display with Abc
highlighted.
– Highlight Shortcuts, then press
.
– Highlight the @ symbol, and press
.
– Enter the remainder of the E-Mail address using the keypad. (For more
information, refer to “Entering Text” on page 38.)
• To add the domain type to the end of the E-Mail address, do the
following:
– Press the Left soft key. A pop-up menu appears in the display with Abc
highlighted.
– Highlight Shortcuts, then press
.
– Select the desired domain type (such as, .com, .net, or .edu) to add to
the E-Mail address.
5. Press
to save your changes.
Speed Dial Numbers
You can assign and change Speed Dial numbers for Contacts
entries.
1.
In standby mode, press Menu (
) and select Contacts ➔
Speed Dial. The Speed Dial list appears in the display.
Tip: You can also assign a Speed Dial number when creating or editing a
Contacts entry. For more information, refer to “Assigning Speed Dial
Numbers” on page 31
2.
3.
Highlight a Speed Dial number.
Press SET (
1.
3.
• Press the Mark All soft key to add all Contacts to the Group.
• Select each Contact to be added to the Group.
Check marks appear to the left of the selected Contacts.
To save the new setting, press the Yes soft key. To discard
the new setting, press the No soft key.
Contacts Groups
4.
Contacts Groups let you group Contacts according to a common
characteristic and let you quickly and easily send messages to
multiple Contacts.
Accessing the Group List
䊳
In standby mode, press Menu (
Press the Done soft key. The selected Contact(s) is (are)
added to this Group.
Removing a Contact From a Contacts Group
1.
In the Group List, select the Group from which you wish to
remove a Contact. A list of the Contacts in the Group
) and select Contacts ➔
Group. The Group List screen appears in the display, listing
the available Contacts Groups.
To mark the Contacts you wish to add to this Group, do one
of the following:
. You are
prompted to confirm the new Speed Dial setting.
5.
Press the Options soft key and select Add. The Add
Contacts screen appears in the display.
). The Set Speed Dial screen appears in the
Enter or highlight a Contact entry, then press
In the Group List, highlight the Group to which you wish to
add one or more Contacts.
2.
display.
4.
Adding One or More Contacts to a Contacts Group
appears in the display.
2.
Highlight the Contact to be removed and press the Remove
soft key. You are prompted to confirm the removal.
Understanding Your Contacts
34
3.
To remove this Contact from the Group, press the Yes soft
key. The Contact is removed from the Group and returned
Adding a Contacts Group
1.
to the General Group.
To keep this Contact in this Group, press
Group screen appears in the display.
.
2.
Sending a Message to Contacts in a Contacts Group
1.
2.
3.
In the Group List, highlight the Group to which you wish to
Enter a name for the new Contacts Group. (For more
information, refer to “Entering Text” on page 38.)
3.
To create the new Contacts Group with the name you
send a message.
entered, press SAVE (
Press the Options soft key and select Send Message. The
appears in the display, with your new Contacts Group
Send To screen appears in the display.
added.
• Press the Mark All soft key to send a message to all Contacts in the
Group.
• Select each Contact in the Group to receive the message.
Check marks appear to the left of the selected Contacts.
Renaming a Contacts Group
Use this option to rename a Group in your Contacts list.
1.
In standby mode, press Menu (
2.
Highlight the Group (other than General) that you wish to
rename, then press the Options soft key and select
(Text or Picture) that you wish to send. (For more
Rename.
information, refer to “Creating and Sending New
3.
The Rename Group screen appears in the display. The
current name of the selected Group shows with a flashing
cursor at the end of the name.
35
) and select Contacts ➔
Group.
Press the Done soft key and select the type of message
Messages” on page 42.)
). The Group List screen re-
To discard your entry, press the Cancel soft key.
To mark the Contacts you wish to recieve a message, do
one of the following:
4.
From the Group List, press the New soft key. The New
4.
Enter a new Group name using the keypad. (For more
3.
5.
Press
to save the changed group name.
Erasing a Contacts Group
Erasing a Contacts Group does not erase any Contacts. All
Contacts assigned to the Group return to the General Group.
1.
In the Group List, highlight the Group you wish to erase.
2.
Press the Options soft key and select Erase. You are
Sending a Contacts Entry
Use the Send Name Card With Bluetooth option to send one or
more selected Contacts entries to another, compatible phone or
other device over a Bluetooth connection.
1.
on page 28.)
2.
To erase this Contacts Group, press the Yes soft key. The
appears in the display with the highlighted Contacts entry
Contacts return to the General Group.
Deleting a Contacts Entry
1.
on page 28.)
2.
marked.
3.
Press the Options soft key and select Erase. The phone
Highlight another Contacts entry you wish to send and
press MARK (
Find and highlight the desired entry in the Contacts list.
(For more information, refer to “Finding a Contacts Entry”
Press the Options soft key, then select Send Name Card
With Bluetooth. The Send Name Card With Bluetooth screen
Group is removed from the Group List and the assigned
To keep this Contacts Group, press the No soft key.
Find and highlight the desired entry in the Contacts list.
(For more information, refer to “Finding a Contacts Entry”
prompted to verify your erasure.
3.
To erase the selected Contact entry, press the Yes soft key.
To keep the selected Contact entry, press the No soft key.
information, refer to “Entering Text” on page 38.)
) to mark the entry for sending. Repeat
this step for all other Contacts entries you wish to send.
4.
When you have marked all the entries you wish to send,
press the Done soft key. The Choose device screen
appears in the display.
prompts you to confirm the erasure.
Understanding Your Contacts
36
5.
Use the Up and Down navigation keys to highlight the
name of the receiving device, then press
. Your phone
automatically connects with the other device and sends
the selected Contact entries.
Note: For information on turning off the Bluetooth connection, see
“Bluetooth” on page 76.
Memory Info
Use the Memory sub-menu to view the amount of Contacts
entries you have stored, as well as the remaining memory.
䊳
In standby mode, press Menu (
) and select Contacts ➔
Memory Info. The amounts of memory used and remaining
for Contacts entries appear in the display.
37
Section 6: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.
Text Entry Modes
You can compose text messages using alphabetical characters,
symbols, and numbers. Each method of character entry (symbol,
number, and so on) is called a text entry mode. There are four
text entry modes, as indicated:
• Alpha—Alphabetical text entry mode. Options are:
– ABC — All upper case
– Abc — Initial capital
– abc — All lower case
• Symbols — Symbol entry mode. Enter symbols into your message by
pressing the corresponding number that appears above it in the
display.
• 123 — Number entry. Enter numbers by pressing the corresponding
key on the keypad.
• T9 Word — Predictive text mode. Press each key only once to enter
the letter of the word that you’re spelling.
Your current mode of text entry [Abc, 123, or T9 Word] is indicated
in the lower left part of the display when composing a text
message.
Changing the Text Entry Mode
1.
While composing a text message, press the Left soft key
(
). A pop-up menu containing the following options
appears in the display:
• T9 Word
• Abc
• ABC
• 123
• Symbols
• Emoticons
• Add T9 Word
Abc is highlighted. Use the Up and Down navigation keys
to choose any of the other four text entry modes. Uses of
the text entry modes are explained in greater detail in
“Messaging” on page 42.
Entering Text
38
Entering Text in Alpha (Abc) Mode
1.
or abbreviations pops-up at the bottom of the text entry
screen.
Enter characters while in Alpha (Abc) mode by pressing the
key with the desired characters (such as, pressing
once for “G”).
2.
Press the key repeatedly until the desired character
appears in the display (such as, pressing
3.
two times
2.
desired word, review the word appearing in the text entry
Pause briefly and the displayed character is accepted and
field and pop-up list.
Press the
3.
key to enter a space.
T9 Word recognizes commonly used words for a sequence of
keypresses and inserts the word into your message. Using T9
mode is much faster than the more traditional method Alpha
mode, since T9 requires only one key press per letter of the word
that you are spelling.
Note: See “Changing the Text Entry Mode” on page 38 for instructions on
changing text entry modes.
While in T9 Word mode, press each key that corresponds to
a desired letter, in sequence, one time. A list of words and/
39
If the word in the text entry field is not the one you meant
to enter, use the Up and Down navigation keys to highlight
Entering Text in T9 Word Mode
1.
When you have completed pressing all the keys for the
for “H”).
inserted into your message.
4.
Example: If you press the key sequence
, the word “Bad” is
likely to appear in the text entry field. In the pop-up list, “Bad”,
“Ace”, and “Caf” appear.
the desired word in the pop-up list.
Example: When you press the key sequence
, the word “And”
appears on the screen. Suppose the word you want is “cod”. Just
press the Up and Down navigation keys until “Cod” is highlighted
in the display.
4.
Press
to accept the highlighted word.
For practice, enter the word “SAMSUNG” into your
message by pressing each of the following keys only once:
Note: In Add T9 Word mode, you enter a word using the same multiple
keypress method as when in Abc text entry mode.
4.
S
A
M
S
U
N
G
T9 Word recognizes that the most commonly used word for
the sequence of keys you just pressed is “Samsung.”
Press
. The word is added to the T9 dictionary.
Entering Upper and Lower Case Letters
In Abc and T9 Word modes, you can select to enter only upper
case letters (ABC/T9 WORD), only lower case letters (abc/T9
word), or a mix of the two (Abc/T9 Word).
1.
While in T9 Word or Abc mode, repeatedly press the
Tip: To enter words not likely to be in the T9 Word dictionary, such as
uncommon abbreviations or slang, try changing the text entry mode
from T9 Word to Abc, abc, or ABC.
key to change the capitalization setting.
Adding Words to the T9 Word Dictionary
capitalization setting.
If pressing the keys corresponding to a word you want to enter
and then scrolling through the pop-up list does not display that
word, do the following:
1.
Clear the word using the
2.
Change the text entry mode to Add T9 Word.
For example, if the left soft key label is ABC, and you want
to enter the word “BALL”, press the
key until the left
soft key label changes to abc, then enter the word “ball”.
key.
Note: See “Changing the Text Entry Mode” on page 38 for instructions on
changing the text entry mode to Add T9 Word.
3.
The left soft key label changes to indicate the current
Tip: To enter a capital letter within a word, such as “SimTam”, change the
capitalization setting to Abc at the beginning of the word and before
entering the “T”. The capitalization setting will automatically change to
abc after you enter each upper case letter.
Enter the word you want to add to the T9 Word dictionary.
Entering Text
40
Entering Numbers
3.
Note: See “Changing the Text Entry Mode” on page 38 for instructions on
changing text entry modes.
䊳
Repeat steps 1 and 2 to insert as many symbols into your
message as desired.
Enter numbers into a text message while in number mode (123).
Entering Emoticons
Emoticons mode enables you to enter emoticons such as :) or
;-) into message text.
While in 123 mode, press the key labeled with the number
that you wish to insert into your message. For example,
press
to enter the number ‘4’ in your message.
Entering Symbols
Note: See “Changing the Text Entry Mode” on page 38 for instructions on
changing text entry modes.
1.
Symbol mode enables you to enter symbols such as @ or % into
message text.
While in Emoticons mode, use the Prev soft key and the
Next soft key to page through the emoticons, if necessary.
2.
Press the key that corresponds to the emoticon that you
wish to enter. For example, press
for the :0 emoticon.
Note: See “Changing the Text Entry Mode” on page 38 for instructions on
changing text entry modes.
1.
While in Symbols mode, use the Prev soft key and the Next
2.
Press the key that corresponds to the symbol that you wish
soft key to page through the symbols, if necessary.
to enter. For example, press
for an exclamation point
(!).
Note: You can also use the navigation keys to highlight the desired symbol
and then press
to enter the selected symbol into your message.
41
Note: You can also use the navigation keys to highlight the desired emoticon
and then press
to enter the selected emoticon into your message.
3.
Repeat steps 1 and 2 to insert as many emoticons into
your message as desired.
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text and picture messages.
Creating and Sending a Text Message
1.
In standby mode, press the Message soft key, then select
Create Message ➔ Text Message. The Create Txt Msg
screen appears in the display showing the To list.
Tip: You can also access Messages by pressing Menu (
Messages.
2.
) and select
Address your message by selecting contacts and/or
– Groups
– Recent Calls
Select Contacts. The Add Contacts screen appears in the display.
For more information, refer to “Finding a Contacts Entry” on
page 28.
Highlight a Contact. Use the Left and Right navigation keys to highlight a
phone Number or E-Mail address for the highlighted Contact. Press
MARK ( ) to mark your selection.
To add the selected contacts to the To list, press the Done soft key.
The Create Txt Msg screen appears in the display showing the
populated To list.
• To enter recipient e-mail address(es), press and hold the
key
to change the text entry mode from 123 to T9 word or abc. (For
more information, refer to “Add a Number or E-Mail Address
to an Existing Entry” on page 33.)
3. When you are finished addressing your message, press
. The Text field appears in the display.
entering number(s) or e-mail address(es) of message
recipient(s):
• To select a mobile number or e-mail address using your Contacts
list, press the Add soft key. The following options appear in the
display:
– Contacts
4.
Enter the text for your message using the keypad. (For
more information, refer to “Entering Text” on page 38.)
Messaging
42
5.
At any point while composing a message, you can set
4.
message send options by pressing the Options soft key.
(For more information, refer to “Message Send Options”
more information, refer to “Entering Text” on page 38.)
5.
on page 46.)
6.
6.
) to send your message.
7.
1.In standby mode, press the Message soft key, then select
) and select
Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s). (For more information, refer to “Creating and
Sending a Text Message” on page 42. See Step 2.)
3.
After addressing your picture message, the Subject field
becomes highlighted.
43
To set message send options, press the Options soft key.
(For more information, refer to “Send Picture Messages in
Create Message ➔ Picture Message. The Create Pic Msg
screen appears in the display showing the To list.
2.
Enter the message text using the keypad. (For more
information, refer to “Entering Text” on page 38.)
Creating and Sending a Picture Message
Tip: You can also access Messages by pressing Menu (
Messages.
Press the Down navigation key. The Text field becomes
highlighted.
Once you’re finished composing your message, press
SEND (
If desired, enter the Subject text using the keypad. (For
Camera Mode” on page 44.)
8.
To add a picture to the message, highlight the Picture field.
• Press the Picture soft key to access the picture gallery. If there are
no pictures in the gallery, press the Camera soft key to launch the
camera, then take a picture. With pictures in the gallery, thumbnail
images appear in the display. Then, do the following:
– Highlight a picture in the gallery.
– To expand the highlighted picture to fill the display, Press the View soft
key.
– To activate the phone’s camera and take a new picture, Press the
Camera soft key. (For more information, refer to “Camera” on
page 57.)
9.
Once you have highlighted a photo, press
. The Create
12. At any point while composing a message, you can set
Pic Msg screen appears in the display with the selected
message send options by pressing the Options soft key.
photo in the Picture field.
(For more information, refer to “Message Send Options”
on page 46.)
10. To add a sound file to your message, highlight the Sound
filed and press the Sounds soft key. The Record New option
13. Once you’re finished composing your picture message, do
and a list of sound files appear in the display with the
one of the following:
Record New option highlighted.
• Press SEND ( ) to send the message.
• Press the Options soft key. For more information, refer to “Send
Picture Messages in Camera Mode” on page 44.
11. Record a new sound file or select a listed sound file.
• If you select the Record New option, the Record New screen
appears in the display. Press REC ( ) to begin recording.
• Wait for the beep, then start speaking. As it is recording the phone
displays a countdown timer that shows the seconds remaining for
the recording.
– To pause the recording, press the Pause soft key. When a memo is
paused, press the Resume soft key to continue recording.
– To stop recording, press SAVE ( ). The Record New option and a
list of sound files appear in the display with the Record New option
highlighted.
• Select your new sound file. The Create Pic Msg screen reappears
in the display with your selected sound file in the Sound field.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
message composer.
1.
In standby mode, press and hold the Camera key
(
), then select Take Photo. The camera viewfinder
screen appears in the display.
Messaging
44
2.
Using the display as a viewfinder, when the image that you
wish to send appears in the display, press Take (
) to
take a picture.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, Recent Calls, and OnlineAlbum. These options allow you to find
and add recipients to the Send To: list.
6.
Note: For more information about using the camera feature in your phone,
see “Camera” on page 57.
The Subject: field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
information, refer to “Entering Text” on page 38.)
3.
Press Send (
) to save the picture and begin delivery
process. You are prompted to send a copy of the picture to
7.
Press the Down navigation key until the Text: field is
highlighted, then enter the message text using the keypad.
AlltelMyPics.net. The following options appear in the
(For more information, refer to “Entering Text” on
display:
page 38.)
• Yes
• No
4. Select the desired option. The Create Pic Msg screen then
appears in the display with the To: list showing.
8.
Your new picture appears in the Picture field.
9.
If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 10.
Note: If you select the Yes option, “Online Album” appears as the first
addressee in the To: list.
5.
Enter the phone number or E-Mail address of the recipient
of the Picture message, then press
45
.
• Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
– Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select the desired option to insert a sound into your message.
10. At any point while composing a message, you can set
message send options by pressing the Options soft key.
(For more information, refer to “Message Send Options”
on page 46.)
11. Press
to send the message. “Connecting...” followed
by “Sending Message” appear in the display and a
progress bar indicates the send status.
Message Send Options
You can set priority, validity, and other options before you send a
message. Which options appear in the Send Options list depends
on what type of message you have composed and what message
field you have highlighted.
1.
After you’ve composed a Text or Picture message, press
the Options soft key. The following are Send Options that
can appear in the display:
• Edit Send To — Lets you add, delete, or change numbers or EMail addresses in a Text message Send To: list.
• Preview — Lets you view a Picture message as the recipient will
see it.
• Add Quick Text — Lets you add Quick Text to a message Subject
(Picture messages only) and/or to the message text.
• Save As Draft — Saves this message in the Drafts folder.
• Priority Level — Lets you assign a High, Normal, or Low (Picture
messages only) priority to the message.
• Validity Period — Lets you set a Date and Time when this
message will no longer be available to the recipient. After the set
period of time, your message is recalled.
• Deferred Delivery — Lets you set a Date and Time when this
message will be delivered.
• Enh. Delivery Ack / Delivery Ack — Set to On to be alerted when
your message is received by the addressee.
• Remove Picture — Removes the picture from a Picture message.
• Remove Sound — Removes the sound file from a Picture
message.
• Add To Contacts — Lets you add the addressee numbers or EMail addresses to your Contacts list.
2. Select a desired option and a value for that option. You’re
returned to the Create Msg screen.
Receiving New Messages
When you receive a message in standby mode, one of the
following occurs:
• If Auto View and Auto Scroll are both set to On — An alert sounds
(unless turned off) and the message text automatically appears in the
Messaging
46
display and scrolls slowly to the end of the message. (For more
information, refer to “Text Message Settings” on page 53.)
• If Auto View is set to Off — An alert sounds (unless turned off) and a
New Message notification appears in the display along with the
closed envelope icon (
). The date and time of the message and
the following options also appear in the display:
– View Now — Opens the message where you have the option to
Forward, Reply With Copy, Save Picture, Save Sound, Save Quick Text,
Go To URL, Lock, Add To Contacts, Callback, or view Message Info.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.
Receive Messages While in a Call
When you receive a message while in a call, one of the following
occurs:
• If Auto View and Auto Scroll are both set to On — The message text
automatically appears in the display and scrolls slowly to the end of
the message. (For more information, refer to “Text Message
Settings” on page 53.)
• A New Message notification appears in the display along with the
closed envelope icon (
). The date and time of the message and,
for Text messages only, the following options also appear in the
display:
47
– View Now — Opens the message where you have the option to
Forward, Reply With Copy, Save Quick Text, Go To URL, Lock, Add To
Contacts, Callback, or view Message Info.
Note: You cannot view a new Picture message during a call.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.
Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Voice Mail Setup
Before callers can leave voice mail messages, you must first set
up your account. For more information, refer to “Setting Up Your
Voicemail” on page 7 and to “General Message Settings” on
page 52.
Checking your Voicemail
1.
In standby mode, press and hold
until you’re
connected to your Wireless Provider’s voicemail system. A
recorded message prompts you for a password.
2.
Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.
Tip: You can also access your Voicemail by using the entries in the Voicemail
folder. For more information, refer to “Voicemail” on page 47.
Message Folders
Inbox
Received messages of all types (except Voice Mail) are stored in
the Inbox.
1.
In standby mode, press the Message soft key, then select
Inbox, to open the Inbox folder.
2.
Highlight a message, then do one of the following:
• To delete the message, press the Erase soft key.
• To view the highlighted message, press OPEN ( ) then proceed
to Step 3.
• To access other options, press the Options soft key. The following
options appear in the display:
– Reply — Lets you compose and send a message to the sender.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
– Forward — Lets you forward the message to other E-Mail addresses
or mobile phone numbers.
– Lock / Unlock — Blocks or allows erasure of the selected message.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
– Erase Multiple — Deletes selected/all unlocked messages from the
Inbox folder.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
• To return to the Messages menu, press
.
3. While viewing a selected message, do one of the following:
• To delete the message, press the Erase soft key.
• To compose and send a message to the sender of the highlighted
message, press REPLY ( ).
• Press the Options soft key, The following options appear in the
display:
– Go To URL — Lets you browse any Internet address included in the
message.
– Play Again — Picture Messages only — Replay a sound file included
with a message.
– Forward — Lets you forward the message to other E-Mail addresses
or mobile phone numbers.
– Reply With Copy — Text Message only — Lets you reply to a
message and include a copy of the original message.
Messaging
48
– Save Pic — Picture Messages only — Saves a copy of the image
included in the selected message to the images Gallery.
– Save Sound — Picture Messages only — Saves the sound file in the
message to the My Sounds gallery.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Lock / Unlock — Block or allow changes to the selected message.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
– Callback — Lets you call the originator of the message.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
• To return to the Inbox list, press
.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
more information, refer to “Lock Phone” on page 97.)
Outbox
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
49
Tip: Verify whether and when a message or e-mail was successfully
received by enabling the Delivery Ack message send option. (For more
information, refer to “Send Picture Messages in Camera Mode” on
page 44.)
1.
In standby mode, press the Message soft key, then select
Outbox. A list of your outgoing messages appears in the
display.
2.
Highlight a message, then do one of the following:
• To delete the message, press the Erase soft key.
• To view the highlighted message, press OPEN ( ) then proceed
to Step 3.
• Press the Options soft key. The following options appear in the
display:
– Forward — Send the message to another addressee.
– Resend — Re-send the message.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
– Erase Multiple — Erase selected/all messages in the Outbox folder.
– Message Info — Lets you display status information about picture
messages.
Select an option to perform the function for that option.
3.
• To return to the Messages menu, press
.
While viewing a selected message, do one of the following:
• To delete the message, press the Erase soft key.
• To resend a message to the original addressee, press Resend
( ).
• Press the Options soft key. The following options appear in the
display:
– Go To URL — Go to a URL included in this message.
– Play Again — Picture Messages only — Replay a sound file included
with a message.
– Forward — Send the message to another addressee.
– Erase — Picture Messages only — Delete the message from the
Outbox folder.
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Save Quick Text — Save the message text in the Quick Text folder.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
– Call / Callback — Lets you call the recipient of the message.
– Message Info — Lets you display status information about picture
messages.
Select an option to perform the function for that option.
• To return to the Outbox list, press
.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
1.
In standby mode, press the Message soft key, then select
Drafts. A list of your draft messages appears in the display.
2.
Use the navigation keys to highlight the message that you
wish to edit, then do one of the following:
• To delete the message, press the Erase soft key.
• To view the highlighted message, press EDIT ( ) then proceed to
one of the following screens:
– Text Message — Create Txt Msg screen showing the To field
appears in the display.
– Picture Message — Create Pic Msg screen showing the To list
appears in the display. Change or add numbers and addresses, then
press
.
Proceed to Step 3.
• Press the Options soft key. The following options appear in the
display:
– Send — Send the message to the current addressee(s).
– Lock / Unlock — Block a message from being erased or free a
message to be erased.
– Add To Contacts — Lets you add the addressee numbers or E-Mail
addresses to your Contacts list.
Messaging
50
– Save Quick Text — Save the message text in the Quick Text folder.
– Erase Multiple — Erase selected/all messages in the Drafts folder.
Select an option to perform the function for that option.
• To return to the Messages menu, press
.
3. If you press EDIT ( ) in the Text screen/field, do one of
Voicemail. A Voicemail status screen indicating the number
of new messages in your voice mailbox, their urgency, and
any callback numbers appears in the display.
2.
the following:
• To send the message, press SEND ( ).
• To exit the message, press
. You are prompted to save your
changed message to the Drafts folder.
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1.
51
In standby mode, press the Message soft key, then select
to call your voice mailbox and listen to your
voice messages.
the following:
• To change text options, press the Left soft key. (For more
information, refer to “Entering Text” on page 38.)
• To send the message, press SEND ( ).
• Press the Options soft key. (For more information, refer to
“Message Send Options” on page 46.)
4. Once you’re finished composing your message, do one of
Press
Note: You can, in standby mode, also press and hold
mailbox.
to dial your voice
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messages
menu, open the message folder where the message to be deleted is
stored, then select and delete the message from the Option menu
while viewing the message content.
1.
In standby mode, press the Message soft key, then select
Erase Messages. The following options appear in the
display:
• Inbox — Lets you delete all messages from your Inbox.
• Outbox — Lets you delete all messages from your Outbox.
• Drafts — Lets you delete all draft messages from the Drafts folder.
• All Messages — Lets you delete all messages from all message
folders.
2. Select the folder containing the messages that you wish to
delete. You are prompted to confirm the erasure of all
messages in that folder.
3.
To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.
Message Settings
The Msg Settings options let you define numerous message
settings such as ringer types and save options.
1.
In standby mode, press the Message soft key, then select
Msg Settings. The following options appear in the display:
• General — Lets you set default option values for Text, Picture, and
Voice messages.
• Text Message — Lets you set default message text option values
for both Text and Pic messages.
• Picture Message — Lets you set default picture message option
values.
2. Select the desired option to perform the function(s) for that
option.
General Message Settings
1.
In standby mode, press the Message soft key, then select
Msg Settings ➔ General. The following options appear in
the display:
• Auto Save — Lets you set whether to automatically save to the
Outbox folder, to discard, or to prompt you to save unsent
messages when you exit them.
• Auto Erase — Automatically erase the oldest read message after
memory is full.
• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• Voicemail # — Lets you update your Voicemail access number.
• Entry Mode — Lets you set the default text entry mode [T9 Word,
Abc/ABC (alphabetically), or 123 (numerical)] for composing
message text.
• Callback # — Lets you disable, enable, and update the callback
number that can be inserted in outgoing messages.
• Signature — Lets you disable, enable, and update the text
signature that can be inserted in outgoing messages.
• Reminder — Lets you set the message receipt reminder to play
Once, Every 2 Minutes, Every 15 Minutes, or not to play (Off).
2. Select the desired sub-menu to enter the sub-menu and
change the selected message settings.
Messaging
52
Text Message Settings
1.
In standby mode, press the Message soft key, then select
Msg Settings ➔ Text Message. The following options
appear in the display:
• Auto View — Automatically view messages as they are received.
• Auto Scroll — When set to On, the phone automatically scrolls
message text, letting you see the complete message text without
using the navigation keys.
• Message View — To view multiple text messages exchanged with
a selected Contact as a “chat” session, select Chat. To view text
messages individually, select Normal.
2. Select the desired sub-menu to enter the sub-menu and
change the selected message settings.
Picture Message Settings
1.
In standby mode, press the Message soft key, then select
Msg Settings ➔ Picture Message. The following option
appears in the display:
• Auto Receive — Lets you choose whether to be prompted to
retrieve picture messages from your provider’s e-mail server or to
automatically retrieve all picture messages as they are received by
the server.
2. Select Auto Receive to enter the sub-menu and change the
selected message setting.
53
Section 8: Alltel Shop
This section explains the Alltel Shop features where users can
download multimedia, applications, games, and check news and
sports.
Finding Applications
With Axcess Shop, you can download full featured applications
over the air including games, personalized ring tones, pictures,
and more.
䊳
In standby mode, press Menu (
), then select Alltel Shop.
Note: The first time you launch Alltel Shop, the warning message “Browse &
Download use airtime. Press Remove not to show this again.” pops up in
your display. To have this message repeat the next time you launch
Alltel Shop, press the Continue soft key. To stop this message
repeating, press the Remove soft key.
The Alltel Shop screen appears in the
display with the Mobile Shop icon
highlighted. You have the following
options:
• Select an application on your phone that
you wish to launch.
• Select the Settings icon to Order Apps,
Move Apps, Manage Apps, change the
Main Menu View, or View the Alltel Apps
log.
• Select the Help icon to review the
following topics:
– Buying New Apps
– What do I pay?
– Charges
– Canceling Subscription
– Demo Apps
– Removing Apps
– Disabled Apps
– Restoring Apps
– Expired Apps
• Select the Mobile Shop icon. The Mobile
Shop menu appears in the display. You
can use the items in this menu to browse
or search for, purchase, and download applications.
Alltel Shop
54
Section 9: Alltel Web
This section outlines how to launch Alltel Web, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application.
With Alltel Web, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Alltel Web, your phone connects to the Internet and the
service indicator icon with a red arrow (
) appears in the
display.
Note: The first time you launch Alltel Web, the warning message “Browse &
Download use airtime.” pops up in your display. To have this message
repeat the next time you launch Alltel Web, press the Continue soft key.
To stop this message repeating, press the Remove soft key.
A list of categories (each representing one or more web
sites) appears in the display.
2.
Alltel Web ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching Alltel Web
1.
In standby mode, do one of the following to launch Alltel
Web:
• Press the Navigation key Up.
• Press Menu ( ), then select Alltel Web.
55
Highlighted the desired category, then press the
soft
key to enter the category list.
Stored Web Content
Exit Alltel Web
䊳
To exit Alltel Web, press
.
Using Alltel Web
When you use Alltel Web, some of the keys operate differently
than during a normal phone call. Alltel Web presents on-screen
items in any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
Alltel Web soft keys
The bottom of the Alltel Web display is a bar that contains
browser commands. The Left and Right (
) soft keys on
the keypad are used to execute the command that appears above
them in the display. These are called “soft keys” because their
functions change depending on the application.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally press
to
select a link when it is highlighted.
Pound/Space Key — Press to insert a space when
entering text.
Number 1 thru 9 — Use the number keys to select items
in a menu if they are numbered.
End Key — Press to exit the Alltel Web and return the
phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
Right Soft Key — Press to activate the command that
appears above it in the display.
How Alltel Web Keys Work
The following table lists Alltel Web keys and their functions.
Navigation keys — Use to browse lists and options.
CLR Key — A browse, back-up key. Press once to back
up one page. Press and hold to go back to home page.
Press to clear the last number, letter, or symbol entered.
Press and hold to completely clear the display.
Asterisk/Shift Key — Press before entering text to
enable uppercase characters.
Last Key — Press to enter a zero (0), or to move to the
last item in a menu.
Alltel Web
56
Section 10: Camera
Use your U350 phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share
them with family and friends. It’s fun, and as easy to use as a
traditional point-and-click camera. This section explains how you
can do the following:
• Take pictures with your phone’s built-in digital camera.
• Send and receive pictures taken with your phone’s camera.
• Set the several options associated with the camera that help you take
crisp, clear pictures.
Taking Pictures
Taking Snap Shots (Single Pictures)
To take a single picture using the current
camera settings, do the following:
In standby mode, press and hold the
Camera key (
) on the right side
of the phone, then select Take Photo.
The camera view finder screen
57
(For more information, refer to “Screen Layouts” on
page 59.)
Note: You can also activate the camera by pressing the Menu soft key, then
selecting Multimedia ➔ Camera.
2.
Using the display as a viewfinder, point the camera at your
subject.
3.
Taking pictures with the built-in camera is as simple as launching
the Camera, choosing a subject, pointing the lens (located on the
front of your phone’s flip, near the hinge), and pressing a button.
1.
appears in the display.
When the image that you wish to capture appears in the
display, press the Camera key (
(
) or the Take key
). The photo you’ve taken appears in the display.
• To save the picture to memory, press the Save soft key.
• To send the photo as part of a Picture message, press the Send
soft key.
• To erase the photo, press the Cancel soft key.
Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. For more information, refer to “Camera Options”
on page 60.
Taking Multi Shot Pictures
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1.
In standby mode, press and hold the Camera key (
• Frame shot — Lets you select and add a colorful frame to the next
photo.
3. Select Series Shot or Mosaic Shot (2x2 or 3x3).
4.
your subject.
5.
Press the Take key (
) or the Camera key (
). The
camera takes one picture (Single Shot), multiple pictures in
quick succession (Series Shot), multiple shots for a single
)
on the right side of the phone, then select Take Photo. The
picture (Mosaic Shot), or one picture including a selected
camera view finder screen appears in the display. (For
frame (Frame shot).
more information, refer to “Screen Layouts” on page 59.)
6.
Press the Options soft key, then highlight the
icon.
The following options appear in the display:
• Single Shot — Take one photo with each press of the Camera
button.
• Series Shot — Lets you take a series of 5 photos.
• Mosaic Shot — Lets you take 4 (2x2) or 9 (3x3) shots combined in
a single photo.
To save the picture(s) to memory, press the Save soft key.
To discard the pictures, press the Cancel soft key.
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.
2.
Using the display as a viewfinder, point the camera lens at
You are prompted to confirm the erasure.
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in
a few easy steps.
1.
In standby mode, press and hold the Camera key (
)
on the right side of the phone, then select Take Photo. The
camera view finder screen appears in the display.
Camera
58
2.
Using the display as a viewfinder, take the desired picture
Screen Layouts
by pressing the Camera key (
Camera Screen
).
The photo review screen appears in the display.
3.
Press the Send key (
).
4.
Enter the recipient’s phone number or e-mail address
using the keypad.
5.
Press the OK key (
) to save the address(es).
6.
Select other message fields as needed. (For more
information, refer to “Send Picture Messages in Camera
Mode” on page 44, and see “Creating and Sending a
Picture Message” on page 43.)
7.
When you are finished composing your message, press
SEND soft key to send the Picture message to the intended
recipient(s).
When you activate your phone’s camera,
the second line of the display is reserved for
the current camera resolution setting and
the picture counter. The center of the
display shows a viewfinder image of the
subject at which the camera is pointed.
Camera Screen Icons
The following icons appear in the Camera screen when the Icon
Display Camera setting is set to On.
Shooting Mode — Indicates Camera shooting mode to
take a Single Shot picture (shown), multiple Series Shot
(
) pictures in automatic succession, a multiple
Mosaic Shot (
) (2x2 or 3x3) picture, a single picture
).
in a Frame shot (
Size — Indicates Camera resolution setting [640x480
), or 128x96 (
)]. (For more
(shown), 320x240 (
information, refer to “Size” on page 61.)
Night Shot — Indicates whether your phone is ready to
take photos in low light: Off (shown) or On (
).
59
Self Timer in use — Delays the camera shutter from Off
[0 seconds (as shown)] to 2 Sec. (
), 5 Sec. (
), or
10 Sec. (
) after you press the Camera key (
).
Quality — Indicates camera’s picture quality setting
from Super Fine (shown) and Fine ( ), to Normal
( ). (For more information, refer to “Quality” on
page 62.)
White Balance — Indicates the current photo White
Balance setting [Auto (shown), Sunny ( ),
Cloudy (
), Tungsten ( ), and Fluorescent (
)].
(For more information, refer to “White Balance” on
page 62.)
Color Effect — Replaces the natural colors in the
viewfinder screen and in your next picture(s) with
shades of a single, selected color (available colors are:
Normal, Black&White, Sepia, Negative, Green, Aqua).
Memory Counter — Indicates the maximum number
of photos you can take at the current Resolution and
Quality settings.
Zoom — Enlarges the image from 0 up to x7 when
you press the Navigation key Up or Down.
Brightness — Brightens or darkens the image from -4
to +4 when you press the Navigation key Left or
Right.
Saving Pictures
After you’ve taken a picture, you can do any of the following:
• Save the picture by pressing the Save soft key. The Save Options
menu pops-up in the display with the following options:
– Save to Default Storage — Saves the picture in the My Images folder
in phone memory. (For more information, refer to “The Photo
Gallery” on page 66.)
– Set As — Saves the picture in the My Images folder and assigns it as
Main Wallpaper, Front Wallpaper, or as a Picture ID for one of your
Contacts.
– Save to AltelMyPics.net Only — Saves the picture to your Wireless
Provider’s server.
• Send the picture to someone else in a Picture message by pressing
the Send soft key.
Note: Before the Create Pic Msg screen appears, you are prompted to save a
copy of the picture to your Wireless Provider’s server.
For a detailed procedure, see “Send Picture Messages in Camera
Mode” on page 44.
• Discard the picture by pressing the Cancel soft key.
Camera Options
The Camera Option buttons let you adjust the default camera
settings to suite available lighting, the subject of the photo, or the
purpose of the photo.
Camera
60
Shooting Mode
Size
Shooting Mode lets you select Fun Frames and/or take multiple
pictures in succession when you press the Camera key (
).
1.
Change the size (in bytes) of your pictures using the Size setting.
1.
In camera mode, press the Options soft key, then highlight
In camera mode, press the Options soft key, then highlight
/
/
/
.
The following options are available:
• Single shot — 1 picture taken when your press the Camera key
(
).
• Series Shot — 5 new pictures taken in automatic succession.
• Mosaic Shot — 4 or 9 new shots taken in succession as you press
the Camera key (
) and combined into a single picture in an
array.
• Frame shot — Adds a selected colorful frame to your next picture.
2. Select the desired option and setting. The related icon
appears in the display.
/
. The following options are available:
viewfinder screen.
Note: The Size setting affects zoom capabilities. When Size is set to 640x480
pixels, zoom is not available. When Size is set to any value lower than
640x480 pixels, zoom settings 1 – 8 are available.
Night Shot
Night Shot lets you take pictures in low light conditions.
Note: When the Shooting Mode option is set to a value other than Single,
either a Series Shot progress bar (
) or a Mosaic
shot icon (
or
) appears in the viewfinder screen.
When you press the Camera key (
/
• 640x480 pixels
• 320x240 pixels
• 128x96 pixels
2. Select the desired option. You’re returned to the camera
), the camera takes
several pictures in rapid succession (Series and Mosaic).
1.
In camera mode, press the Options soft key, then highlight
/
. The following options appear in the display:
• Off
• On
2. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
61
Self Timer
1.
1.
In camera mode, press the Options soft key, then highlight
. The following options are available:
• Off
• 2 Sec.
• 5 Sec.
• 10 Sec.
2. Select the desired Self Timer option. If you select 2, 5, or
10, the Self Timer icon appears in the camera screen in the
display.
When you press the Camera key (
/
. The following options appear in the
display:
• Super Fine
• Fine
• Normal
2. Select the quality setting of your choice. You’re returned to
the camera viewfinder screen.
White Balance
White Balance allows you to adjust video quality according to
available light.
1.
), the countdown
In camera mode, press the Options soft key, then highlight
/
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
In camera mode, press the Options soft key, then highlight
/
/
/
/
. The following options
timer indicates the time remaining before the camera
appear in the display:
takes the picture.
• Auto — The camera automatically adjusts color balance to
available light.
• Sunny — Use this setting when taking photos in full sun.
• Cloudy — Use this setting when taking photos in cloudy
conditions.
• Tungsten — Use this setting when taking photos under
incandescent lights.
Tip: To stop or disable the Self Timer without resetting it, press
.
Quality
You can affect how much your picture is compressed, thereby
reducing it’s overall size, not to be confused with picture Size
(resolution).
Camera
62
• Fluorescent — Use this setting when taking photos under
fluorescent lights.
2. Select the White Balance you wish to use. The camera
2.
the camera viewfinder screen.
viewfinder screen appears in the display with your
When you take your next picture, the phone’s display
selected White Balance applied.
The next time you press the Camera key (
previews your subject image with the selected color effect.
), the
camera applies the selected White Balance to your photo.
Color Effects
Change the look of your pictures with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.
In camera mode, press the Options soft key, then highlight
. The following options pop-up:
Note: To disable Color Effects, choose Normal.
•
•
•
•
•
63
• Aqua — Subjects and pictures appear in an aqua hue.
Select the color effect of your choice. You’re returned to
Normal — Subjects and pictures appear with a normal hue.
Black&White — Subjects and pictures appear in black and white.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Negative — Subjects and pictures appear in inverted colors.
Green — Subjects and pictures appear in a greenish hue.
Camera Settings
When you change a setting, your change is retained until you
change that setting or reset all your camera settings.
Auto Save
1.
In camera mode, press the Options soft key, then highlight
(
) and select Auto Save. The following options appear in
the display:
• Off
• On
2. Select the automatic save setting of your choice. You’re
returned to the camera viewfinder screen.
Icon Display
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
1.
In camera mode, press the Options soft key, then highlight
(
) and select Icon Display. The following options appear
in the display:
• Display All — All Camera display icons appear in the Camera view
finder screen.
• Guideline — Removes the Camera display icons (if displayed) and
displays a crosshatch pattern in the Camera view finder screen.
Camera display icons appear when you press the Options soft key.
• No Icons — Removes the Camera display icons (if displayed) from
the Camera view finder screen. Camera display icons appear when
you press the Options soft key.
View Mode
1.
In camera mode, press the Options soft key, then highlight
(
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds act as an
audible reminder that your camera has taken a picture.
1.
(
• Landscape — Shows a wider, more panoramic view of the
subject.
• Portrait — Shows a narrower, more vertically oriented view of the
subject.
2. Select the view mode setting of your choice. You’re
returned to the camera viewfinder screen.
) and select Shutter Sound. The following shutter
sounds appear in the display:
• Off
• Shutter 1
• Shutter 2
• Shutter 3
2. Select the shutter sound setting of your choice. You’re
) and select View Mode. The following options appear
in the display:
In camera mode, press the Options soft key, then highlight
returned to the camera viewfinder screen.
Alltel MyPics Reminder
This option lets you control the Alltel MyPics prompt that pops-up
when you send a picture.
1.
In camera mode, press the Options soft key, then highlight
(
) and select AlltelMyPics Reminder. The available
options are:
• On — Saves the picture and displays the Send to AlltelMyPics.net
menu when you press the Send soft key, before displaying the
Create Pic Msg screen.
Camera
64
• Off — Saves the picture and displays the Create Pic Msg screen
when you press the Send soft key.
2. Select the Reminder setting of your choice. You’re returned
display, and the screen image enlarges to show the affects
of your changes.
to the camera viewfinder screen.
The next time you press the Camera key (
Reset Settings
This option lets you reset the Camera’s settings to their factory
default values.
䊳
In camera mode, press the Options soft key, then highlight
(
) and select Reset Settings. You are prompted to
confirm the reset.
• To reset the Camera settings, select Yes.
• To keep the current Camera settings, select No.
selected Zoom setting.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
1.
2.
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (x1 – x7) enlarges your pictures (x1 is
normal).
Note: Zoom is not available if the Size option is set to 640x480.
In camera mode, press the Navigation key Left or Right.
The Brightness adjustment appears in the display.
Camera Adjustments
Zoom
), the
Camera takes an enlarged picture, according to your
To brighten your next picture(s), press the Navigation key
Up. To darken your next picture(s), press the Navigation
key Down. (The screen image lightens or darkens to show
the affects of your changes).
The next time you press the Camera key (
), the
camera takes a lighter or darker picture according to your
䊳
In camera mode, press the Navigation key Up and Down to
adjust the Zoom. The Zoom adjustment appears in the
65
selected Brightness setting.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1.
In the Camera viewfinder screen, press the Gallery soft
key. Any pictures that you’ve saved are listed with their
thumbnail images in the display.
2.
• Lock/Unlock — Prevent/allow erasure of the currently highlighted
or displayed image.
• Slide Show — View all of your pictures as a slide show.
• Picture Info — View the Name, Date and Time created,
Resolution, and Size of the currently highlighted or displayed image.
5. Select the desired option to perform its function or to enter
its sub-menu.
To launch the Camera and take new pictures, press the
Camera soft key.
3.
4.
To view a picture, press the VIEW soft key.
For more options, press the Options soft key. The following
additional options pop-up:
• Send — Send the currently highlighted or displayed image as part
of a Picture message.
• Online Album — Automatically sends a copy of the highlighted
image to your Wireless Provider’s online server.
• Set As — Assign the currently highlighted or displayed image as
the Main Wallpaper, the Picture ID for a Contact, or the Front
Wallpaper.
• Erase Files — Delete one or more marked images from the My
Images folder.
• Rename — Change the name of the picture file.
Camera
66
Section 11: Multimedia
Your phone contains galleries where you can, store, access, and
manage your photos (see “Camera” on page 57), downloaded
images and ringtones, sound recordings (voice memos), and
shuffle sets (images and melodies).
– Send — Send to someone as part of a Picture message. (See “Send
Picture Messages in Camera Mode” on page 44 for more
information.)
– Online Album — Lets you access pictures stored in your album on
your Wireless Provider’s server.
– Set As — Lets you set the highlighted picture as the Main Wallpaper,
a Picture ID for one of your Contacts, or as the Front Wallpaper.
– Erase Files — Delete one or more marked images from the My
Images folder.
– Rename — Change the file name for the highlighted picture.
– Lock / Unlock — Block/permit erasure of the highlighted image.
– Slide Show — View all of your pictures as a slide show.
– Picture Info — View the Name, Date and Time created, Resolution,
and Size of the currently highlighted or displayed image.
Using My Images Gallery
My Images lets you manage your photos and pictures you
download, and lets you choose the pictures that appear in your
phone’s display when you turn it on or off, while in standby mode
(wallpaper), and as image IDs for your contacts.
1.
In standby mode, press Menu (
), then select Multimedia
➔ My Images. A multiple-page matrix of thumbnail views
of saved photos and images appears in the display.
Note: You can also access My Images while in Camera mode, by pressing the
Gallery soft key.
2.
Highlight an image or photo, then do one of the following:
• To take new photos, press the Camera soft key.
• To expand the highlighted picture to fill the screen, press VIEW
( ).
• To access other options, press the Options soft key. The following
options appear in the display:
67
3.
Select the desired option to launch it’s function.
To return to the previous menu, press
standby mode, press
. To return to
.
Using My Ringtones Gallery
My Ringtones lets you assign ringtones for calls, alarms, and
other alerts.
1.
In standby mode, press Menu (
), then select Multimedia
➔ My Ringtones. A list of ringtones appears in the display.
2.
Highlight a ringtone, then do one of the following:
• To assign the highlighted ringtone to be used as a Ringtone,
Contact ID, or Alert Tone, press the Set As soft key.
• To hear the ringtone, press PLAY ( ).
• To show the Title, File Size, and File Type for the highlighted
ringtone, press the Info soft key.
3. To return to the previous menu, press
. To return to
standby mode, press
), then select Multimedia
The following options appear in the display:
• Record New — Lets you record voice memos.
• A list of recorded voice memo files and melodies.
Recording Voice Memos
In standby mode, press Menu (
), then select Multimedia
➔ My Sounds➔ Record New. The Record New screen
appears in the display.
2.
Press REC (
Press SAVE (
) to stop recording and save the voice
memo.
Using and Managing Voice Memos
1.
2.
➔ My Sounds.
1.
4.
In standby mode, press Menu (
), then select Multimedia
➔ My Sounds.
My Sounds lets you record and manage voice memo files and
lets you assign melodies as ringers or alerts.
In standby mode, press Menu (
Press the Pause / Resume soft key to pause/resume
recording.
.
Using My Sounds Gallery
1.
3.
) to begin recording a voice memo.
Highlight a saved voice memo file, then do one of the
following:
• To erase the selected voice memo file, if it is unlocked, press the
Erase soft key.
• To listen to the voice memo, press PLAY ( ).
• To access other options, press the Options soft key. The following
options appear in the display:
– Send — Send to someone as part of a Picture message. (See “Send
Picture Messages in Camera Mode” on page 44 for more
information.)
– Set As — Assign the highlighted ringtone to be used as a Ringtone,
Contact ID, or as the Alert Tone.
– Rename — Change the name of the voice memo file.
– Lock / Unlock — Block/permit erasure of the highlighted image.
– Erase All — Erase all unlocked voice memos.
Multimedia
68
➔ Shuffle. The following options appear in the display:
– Sound Info — Shows the title, size, type, and date for the file.
Using and Managing Melodies
1.
In standby mode, press Menu (
), then select Multimedia
➔ My Sounds.
2.
When you highlight a melody file, you have the following
options:
1.
• To hear the melody, press PLAY ( ).
• To access the following options, press the Options soft key:
– Send — Send to someone as part of a Picture message. (See “Send
Picture Messages in Camera Mode” on page 44 for more
information.)
– Set As — Assign the highlighted ringtone to be used as a Ringtone,
Contact ID, or as the Alert Tone.
– Erase All — Erase all unlocked melodies.
– Sound Info — Shows the title, size, and type for the file.
Select the desired option to launch it’s function.
3. To return to the previous menu, press
. To return to
standby mode, press
.
69
Note: If you have no Image Shuffle set, “No Image Shuffle” appears in the
Image Shuffle screen.
2.
Press the Add soft key. The following options appear in the
display:
• My Images — Lists available downloaded image files.
• Preset Images — Lists available preloaded image files.
3. Select the desired images folder. A 2-by-2 matrix of
thumbnail images appears in the display.
Highlight an image to be included in the Image Shuffle,
then press MARK (
The Shuffle option lets you assign images and/or melody files to
Shuffle sets and to be shown and played in random order.
In standby mode, press Menu (
From the Shuffle menu, select Image Shuffle. The Image
Shuffle screen appears in the display.
4.
Setting Up Shuffle
1.
• Image Shuffle — Lists assigned preloaded and downloaded
image files that can be shown in random sequence as Wallpaper.
• Melody Shuffle — Lists assigned preloaded and downloaded
melody files that can be played in random sequence as ringers.
Image Shuffle
), then select Multimedia
) or press the Options soft key. The
following options appear in the display:
• View — Toggles the highlighted image between full screen and
thumbnail views.
• Mark All / Unmark All — Marks/unmarks all available files in this
folder for inclusion in/exclusion from the Image Shuffle.
5. Select the desired option to invoke. Repeat Steps 4 and 5
as needed.
6.
Once you have marked all the files you want to include in
The following options appear in the display:
• On — Activates the Image Shuffle for assignment as the Wallpaper
in the background of your phone’s idle screen.
• Off — Deactivates the Image Shuffle.
10. Select the desired option, you are returned to the Shuffle
sub-menu.
the Shuffle, press the Done soft key. You are prompted to
confirm saving your selections.
• To save your selections to the Image Shuffle, press the Yes soft key.
• To discard your selections, press the No soft key.
You are returned to the Image Shuffle screen that shows
thumbnail views of your selected images.
7.
Melody Shuffle
1.
display:
• Erase — Discards the highlighted image from the Image Shuffle.
• Erase All — Discards all images from the Image Shuffle.
8. When you are satisfied with the images assigned to your
Image Shuffle, press
to return to the Shuffle sub-
menu.
Highlight the Image Shuffle option, then press the Set As
From the Shuffle menu, select Melody Shuffle. The Melody
Shuffle screen appears in the display.
To delete any or all images from your Image Shuffle, press
the Options soft key. The following options appear in the
9.
Note: Once you create an Image Shuffle, it is ready to be assigned using the
Wallpaper setting. (For more information, refer to “Wallpaper” on
page 89.)
Note: If you have no Melody Shuffle set, “No Melody Shuffle” appears in the
Melody Shuffle screen.
2.
Press the Add soft key. The following options appear in the
display:
• My Ringtones — Lists available preloaded and downloaded
ringtone files.
• My Sounds — Lists available preloaded and downloaded melody
files.
soft key.
Multimedia
70
3.
Select the desired sound files folder. A list of ringtones or
• To erase your selections from the Melody Shuffle, press the Yes soft
key.
• To keep your selections in the Melody Shuffle, press the No soft
key.
You are returned to the Melody Shuffle screen which shows
melodies appears in the display.
4.
Highlight a ringtone or melody to be included in the Melody
Shuffle, then press MARK (
) or the Mark All soft key to
mark the desired file(s).
5.
Once you have marked all the files you want to include in
When you are satisfied with the sound files assigned to
the Melody Shuffle, press the Done soft key. You are
your Melody Shuffle, press
prompted to save your selections:
sub-menu.
• To save your selections to the Melody Shuffle, press the Yes soft
key.
• To discard your selections, press the No soft key.
You are returned to the Melody Shuffle screen which shows
a list of your selected ringtones and/or melodies.
6.
a list of your selected ringtones and/or melodies.
7.
To delete any or all sound files from your Image Shuffle,
press the Options soft key. The following options appear in
8.
to return to the Shuffle
Highlight the Melody Shuffle option, then press the Set As
soft key. The following options appear in the display:
• On — Activates the Melody Shuffle for assignment as the call
ringer.
• Off — Deactivates the Melody Shuffle.
9. Select the desired option, you are returned to the Shuffle
sub-menu.
the display:
• Erase — Discards the highlighted sound file from the Melody
Shuffle.
• Erase All — Discards all sound files from the Melody Shuffle.
You are prompted to erase your selections:
71
Note: Once you create a Melody Shuffle, it is ready to be assigned using the
Ringer Type setting. (For more information, refer to “Ringer Type” on
page 92.)
Section 12: Tools
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.
Accessing Your Phone’s Tools
To launch the Tools menu:
䊳
In standby mode, press Menu (
), then select Tools. The
Tools menu appears in the display.
Voice Service
Your u350 includes VoiceSignal, state-of-the-art voice
recognition software that lets you use your voice to dial numbers,
access your Contacts list, and open Tools. To access your
phone’s voice recognition, do the following:
1.
At the Tools menu, select Voice Service. The following
options appear in the display:
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see “Using Voice Dial” on page 18 and
see “Voice Method” on page 28 for more information.)
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
refer to “Digit Dialing” on page 74.)
2.
Highlight the desired sub-menu, then press
.
Voice Commands
1.
To access the Voice Commands menu, do one of the
following:
• In standby mode, press and hold the
key.
• From the Tools menu, select Voice Service ➔ Voice
Commands.
Note: You can also set your phone to start VoiceSignal when you open the flip
or connect an optional headset to the phone. (For more information,
refer to “Voice Launch” on page 75)
“Say a Command” appears in the display and is
pronounced through the earpiece, followed by a list of
available commands:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by
saying the digits in the number. (For more information, refer to
“Using Voice Dial” on page 18.)
• Send Text — Lets you access Create Text Message.
Tools
72
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
• Go to — Lets you access the following list of your phone’s features
and functions:
– Messages
– Axcess Shop
– Axcess Web
– Contacts
– Calls
– Next Menu — Lets you access the Multimedia, Tools, Settings,
and Phone Info features and functions.
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status, Signal, Coverage, Battery, or My
Phone #.
2. Speaking clearly, say the command that you want to use.
If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
Choice Lists
When VoiceSignal cannot recognize a name or number, it
displays a choice list of up to three possible choices, and
prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists with name
dialing, digit dialing, and contacts.
To change the way VoiceSignal uses choice lists:
1.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Choice Lists.
2.
Highlight the Choice List behavior you prefer:
• Automatic — VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On — VoiceSignal always displays a choice list, even when
there is only one choice.
• Always Off — VoiceSignal never displays a choice list.
3. Press the OK soft key or
to accept the new setting.
Press
to discard the new setting and return to the
Voice Settings menu.
73
Sensitivity
1.
2.
• Use Adapt Digits in a quiet place.
From the Tools menu, select Voice Service ➔ Voice Settings
• Make sure you wait for the beep before starting to speak.
➔ Sensitivity.
• Speak clearly, and say each digit distinctly.
Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less spoken
commands or names.
3.
Press the OK soft key or
Press
to accept the new setting.
to discard the new setting and return to the
Voice Settings menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Digit Dialing ➔ Adapt Digits. Your phone displays text
describing the Adapt Digits process.
2.
Press the OK soft key or
. Your phone displays the first
digit sequence and “Please say” plays through the speaker
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
followed by the four digits appearing in the display.
3.
Wait for the beep and say the digits using your normal tone
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
of voice. After a moment, the phone plays back the
Tips for Adapting Digit Dialing:
• If the recording was good, say “Yes.”
recording and prompts “Did the recording sound ok?”
Tools
74
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4.
After 10 sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
6.
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1.
Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “Adaptation complete”
plays through the speaker and you are returned to the Digit
Dialing menu.
Reset Digits
•
•
•
•
Prompts — On/Off — Enables or disables audio prompts.
Digits — On/Off — Enables or disables digit playback.
Names — On/Off — Enables or disables name playback.
Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone’s audio name
playback.
2. Highlight the desired option, then press
.
3.
Highlight the desired setting.
4.
Press the OK soft key or
Press
To reset digit dialing to factory default settings, do the following:
1.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Digit Dialing ➔ Reset Digits. The phone prompts you to
confirm digit reset.
2.
Press the OK soft key or
or press the Back soft key or
75
to reset your digit adaptation,
to cancel.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Sound. The following options appear in the display:
After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
5.
Sound
to accept the new setting.
to discard the new setting and return to the
Voice Settings menu.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1.
From the Tools menu, select Voice Service ➔ Voice Settings
➔ Voice Launch. The following options appear in the
Bluetooth
display:
• Key Only — Press and hold
to activate VoiceSignal for one
call.
• Key/EarMic — Attach a headset to your phone. Press and hold
or press and hold the button on the headset to activate
VoiceSignal.
• Key/Flip — Open the flip or press and hold
to activate
VoiceSignal.
2. Highlight the option you want.
3.
Press the OK soft key or
Press
to accept the new setting.
to discard the new setting and return to the
Voice Settings menu.
About
This option causes the About VoiceSignal screen to appear in the
display, showing version and build information about the
VoiceSignal software included on your phone.
䊳
From the Tools menu, select Voice Service ➔ Voice Settings
➔ About.
The About Nuance screen appears in the display showing
the version level of the Vsuite software currently installed
on your phone.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
To turn Bluetooth support on:
䊳
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings ➔ Enable.
Tools
76
“Bluetooth set to on” and the gray Bluetooth On icon (
)
3.
appear in the display.
display.
From the Tools menu, select Bluetooth ➔ Bluetooth
4.
Highlight the device you want to pair with your phone.
Settings ➔ Disable.
5.
Press PAIR (
phone. You are prompted to enter the passkey or PIN for
the gray Bluetooth On icon (
the selected device.
) disappears.
6.
. (See the
From the Tools menu, select Bluetooth ➔ Add New
messages appear to inform you that your phone is paired
Device.
with the device and to prompt you to connect to the paired
device.
If Bluetooth is off, you are prompted to “Turn Bluetooth
on?”. Press the Yes soft key to turn Bluetooth on.
Note: Press the No soft key to leave Bluetooth off and return to the Bluetooth
sub menu.
“Place device you are connecting to in discoverable mode”
appears in the display.
Place the Bluetooth device in discoverable mode. (See the
device user manual for more information.)
77
Enter the device passkey or PIN and press
device user manual for more information.) Pop-up
To search for available Bluetooth devices:
2.
) to pair the highlighted device with the
“Bluetooth set to off” appears in the display and the and
Add New Device
1.
. Your phone searches for available Bluetooth
devices. The names of available devices appear in the
To turn Bluetooth support off:
䊳
Press
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
7.
To connect your phone and the new device, press the Yes
soft key.
Note: If you are pairing and connecting to another phone or to a personal
computer, you are prompted to select Always Ask (prompt you to
accept/refuse) or Always Connect (no prompt) in response to
connection attempts by the new device.
Registered List
This menu provides a list of Bluetooth
wireless technology devices discovered by
your handset.
1.
From the Tools menu, select
Bluetooth ➔ Registered List. A list
of registered Bluetooth devices
appears in the display.
Connecting to a Bluetooth Device
From the Registered List,
1.
Highlight a device and press the Options soft key. The
following options appear in the display:
• Remove Device — Deletes the device from the Registered List.
• Rename Device — Lets you change or replace the device name,
as needed.
• Incoming Security — Lets you specify whether to Always Ask
before accepting connections with this device or to Always
Connect.
• Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
• Get Files — Lets you retrieve files from this device.
• Send Name Card — Lets you send Contact entry information to
this device.
2. Select the desired option.
1.
Select a device.
2.
If you are unable to connect with the device a pop-up
Bluetooth Settings
appears in the display. Press the Yes soft key to retry.
Enable/Disable
Disconnecting from a Bluetooth Device
From the Registered List,
䊳
Highlight the device and press the Off soft key.
Managing Your Registered List
From the Registered List,
Selecting this option turns Bluetooth on or off. (For more
information, see “Turn Bluetooth On/Off” on page 76)
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
Tools
78
Device Name
Shows your handset’s name. You may change this name. Enter
the text and press
.
Supported Profiles
Lists the Bluetooth profiles your phone supports. Selecting a
profile shows a description of that profile.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
Calendar
Calendar allows you to view the current,
past, or future month in calendar format.
While viewing the calendar, the current date
is highlighted, and days with scheduled
events are surrounded by a box.
2.
Calendar screen:
• Left/Right navigation keys — Move the highlighting back/ahead
one day per keypress.
• Up/Down navigation keys — Move the highlighting back/ahead
one week per keypress.
• Up/Down volume keys — Moves the date and screen back/
ahead one month per keypress.
• Options key — Press to access the Go To Date (highlights a date
you enter) and the Go To Today (highlights today’s date) options.
Add a New Event
1.
From the Tools menu, select
highlighted. The month and year appear at the top of the
display.
2.
3.
Press Add. The New Event screen appears in the display
with the Appointment Name option highlighted.
highlighted. The month and year appear at the top of the
display.
Navigate to a desired date. (For more information, refer to
“Navigating the Calendar” on page 79.)
Calendar.
The calendar appears in the display with the current date
From the Tools menu, select Calendar.
The calendar appears in the display with the current date
Navigating the Calendar
1.
Use the following controls to highlight a date in the
4.
Enter the Appointment Name using the keypad. (For more
information, refer to “Entering Text” on page 38.)
79
5.
Use the Up/Down navigation keys to highlight the following
6.
To store this Event in your Calendar, press SAVE (
). An
New Event options:
alarm will notify you prior to the Event, if Reminder is set to
• Start Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
• Start Time — Populated with the current time (rounded to the
nearest half-hour). To change the time, use the keypad.
– Use the Left/Right navigation keys to select AM or PM.
• End Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
• End Time — Populated with a time one half-hour later that Start
Time. To change the time, use the keypad.
– Use the Left/Right navigation keys to select AM or PM.
• Alert — Select Tone / Vibrate using the Left/Right navigation keys.
– To select a particular Tone, use the Up/Down navigation keys to highlight
the current Tone and press the Left/Right navigation key. The Alert
Tone menu appears in the display. (For more information, refer to
“Ringer Type” on page 92.)
• Reminder — Select Once / Every 2 Minutes / Every 15 Minutes /
Off using the Left/Right navigation keys.
• Alert Time — Select 15 Min. Before / 30 Min. Before / 1 Hour
Before / 3 Hours Before / 5 Hours Before / 1 Day Before / On
Time / 5 Min. Before / 10 Min. Before using the Left/Right
navigation keys.
a value other than Off.
View/Change an Event
1.
From the Tools menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
2.
Navigate to a desired date. (For more information, refer to
“Navigating the Calendar” on page 79.)
3.
To open the highlighted date and show a list of Events,
press VIEW (
4.
).
Highlight an Event to view, then press VIEW (
) to display
the specifics of the highlighted Event.
5.
To scroll the Event contents, use the Up/Down navigation
keys.
6.
To change the event details, press the Edit soft key. (For
more information, refer to “Add a New Event” on
page 79.)
Tools
80
7.
8.
To return to the Events list, press
.
• Monthly — Returns you to the Calendar screen.
• Erase — Remove this event from the Calendar.
• Erase All — Erase all events from the Calendar.
9. Select an option to invoke its function.
Memo Pad
Create notes and store them in Memo Pad.
Notes that you create in Memo Pad can’t be
prioritized or assigned an alert. Return to
Memo Pad anytime to review and edit your
notes.
Create a Memo
From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.
2.
To add a Memo, press Add. A numbered Memo screen
appears in the display.
3.
Enter Memo text using the keypad. (For more information,
refer to “Entering Text” on page 38.)
81
When you’re finished entering details for the Memo, press
OK (
For other options, press Options. The following options
appear in the display:
1.
4.
5.
). The Memo is saved.
To discard this Memo and return to the Memo Pad screen,
press Cancel.
Review, Edit, and Erase Memos
1.
From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.
2.
To review a Memo:
• Highlight a Memo and press VIEW ( ). The numbered Memo
view screen appears in the display.
• Use the Up/Down navigation keys to scroll the Memo text.
3. To edit a Memo:
• From the Memo Pad screen, highlight the Memo and press
Options. The following options appear in the display:
– Edit — Change the currently highlighted Memo.
– Erase — Erase the highlighted Memo.
– Erase all — Erase all of the unlocked memos.
– Lock / Unlock — Prevent/allow erasure of the highlighted Memo.
Select Edit. The numbered Memo edit screen appears in the display.
• From the Memo view screen, press Edit. The numbered Memo
edit screen appears in the display.
• Use the keypad to change the Memo text. (For more information,
refer to “Entering Text” on page 38.)
• When you’re finished changing the Memo, press
. The
changed Memo is saved.
4. To erase a Memo:
• From the Memo Pad screen, highlight the Memo and press
Options. The following options appear in the display:
– Edit — Change the currently highlighted memo.
– Erase — Erase the highlighted memo.
– Erase all — Erase all of the unlocked memos.
– Lock / Unlock — Prevent/allow erasure of the highlighted memo.
Select Erase. You are prompted to confirm the erasure.
• From the Memo view screen, press Options. The following options
appear in the display:
– Erase — Erase the Memo you are viewing.
– Add New Memo — Add a new Memo to Memo Pad.
– Lock / Unlock — Prevent/allow erasure of the Memo you are viewing.
Select Erase. You are prompted to confirm the erasure.
• To erase the Memo, press Yes. To keep the Memo, press No.
Alarm Clock
Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm occurs at the specified time on the next day.
Set an Alarm
1.
From the Tools menu, select Alarm
Clock. The following options appear
in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Select the alarm clock that you wish to set. The selected
Set Alarm screen appears in the display with the Alarm
option highlighted and with the current time showing
above it.
3.
Use the Up/Down navigation keys to highlight the following
Set Alarm options:
• Alarm — Use the Left/Right navigation keys to select On or Off.
• Time — Populated with the current time. To change the time, use
the keypad.
– Use the Left/Right navigation keys to select AM or PM.
Tools
82
• Frequency — Use the Left/Right navigation keys to select Daily /
Mon.–Fri. / Weekends / Once.
• Ringer — Select Tone / Vibrate using the Left/Right navigation
keys.
– To select a particular Tone, use the Up/Down navigation keys to highlight
the current Tone, then press the Left/Right navigation key. The Alert
Tone menu appears in the display. (For more information, refer to
“Ringer Type” on page 92.)
4. When you’re finished entering the time and frequency for
the alarm, press SAVE. If the Alarm is set to On, the alarm
icon (
) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
• To silence the alarm, press
.
• If the alarm was set as a Daily alarm, the alarm icon remains in the top
of the display.
• If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
Turn Off an Alarm
1.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
83
• Alarm 2
• Alarm 3
2. Highlight the Alarm you wish to turn off, then press
Options. The following options appear in the display:
• Off — Disables the highlighted Alarm and retains the current
settings.
• Reset Alarm — Disables the highlighted Alarm and resets the
Alarm settings to default values.
• Reset All — Disables all Alarms and resets all Alarm settings to
default values.
3. Select the desired option to turn the selected Alarm(s) off.
World Time
World Time lets you view the time of day or
night in any of the 24 different time zones
around the world.
Note: To use World Time, you need to subscribe to
your Wireless Provider’s digital service.
1.
From the Tools menu, select World
Time. A world map appears in the
display.
2.
Use the Left/Right navigation keys to browse cities and
their current times.
PST/PDT : Los Angeles
3.
The following cities are supported.
PST/PDT :
San Francisco
MST/MDT : Denver
MST/MDT : Phoenix
CST/CDT : Chicago
CST/CDT : Dallas
EST/EDT : New York
EST/EDT : Miami
Caracas
La Paz
Newfoundland
Buenos Aires
Brasilia
Mid Atlantic
Cape Verde
London
Lisbon
Rome
Paris
Do one of the following:
• To show Daylight Savings Time (DST) for the displayed time zone,
press the DST On soft key [the DST on icon ( ) appears]; or
press the DST Off soft key to display standard time.
• To set the displayed time zone as the home time zone for your
phone, press the Options soft key and select Set as home zone.
You are prompted to confirm the Home Zone change. To save your
change, press the Yes soft key. The home zone marker moves to
the displayed time zone.
• To keep the displayed time zone as a second, default time zone,
press
. You are returned to the Tools menu.
• To discard the displayed time zone and close the World Time
screen, press
. You are returned to the Tools menu.
Berlin
Athens
Helsinki
Istanbul
Moscow
Jidda
Nairobi
Tehran
Abu Dhabi
Kabul
Tashkent
Mumbai
New Delhi
Colombo
Kathmandu
Alma-ata
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Adelaide
Guam
Calculator. The Calculator screen
Sydney
Okhotsk
Wellington
appears in the display.
Auckland
Samoa
Midway
Calculator
You can perform calculations, including
addition, subtraction, multiplication and
division using your phone.
1.
From the Tools menu, select
HAST/HADT : Honolulu HAST/HADT : Hawaii AKST/AKDT : Alaska
Tools
84
2.
Enter the first number in your equation using the keypad.
(Numbers can be up to 9 digits long, and can include a
decimal point followed by up to 2 more digits.)
Stop Watch
You can use this function to set a stop
watch.
• Press
to enter a decimal point.
• Press
to change the sign for a number to a negative.
3. Press Operator to add parentheses [( )] to your equation or
1.
to enter a Power exponent (^), such as, 3^2, which is the
2.
Watch. The Stop Watch screen
appears in the display.
equivalent of 32.
4.
Press the Clear soft key to clear current entries.
5.
Use the Navigation keys (as shown in the Calculator
• [ + ] Addition
• [ x ] Multiplication
• [ - ] Subtraction
• [ ÷ ] Division
6. Use the keypad to enter the second number into your
equation.
7.
85
Press
to perform the calculation and view the result.
Press
to start, stop, and resume
the Stop Watch count.
3.
Press Record at the start of each succeeding event/lap to
record the completion time for the previous event/lap. You
can record up to eight event/lap times.
screen) to set the type of calculation that you wish to
perform. Your choices are as follows.
From the Tools menu, select Stop
4.
Press Reset to reset the Stop Watch and to erase all Stop
Watch (lap) times recorded.
Converter
The conversion menu provides the
following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
Currency — Reviewing/Editing Exchange Rates
• Temperature
Using Converters
To convert a currency, length, weight, volume, area, or
temperature, do the following:
1.
From the Tools menu, select Converter. The following list of
1.
From the Tools menu, select Converter ➔ Currency.
converters appears in the display:
2.
Press the Rate soft key. The Exchange Rate list appears in
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
2. Select the conversion feature you wish to use.
3.
the display.
3.
4.
key.
Highlight a currency whose exchange rate you wish to
change.
5.
Use the keypad keys to change the selected U.S. Dollar
(USD)-based exchange rate value.
Enter the quantity you want converted in the From field.
Note: To include a decimal point, press the
). The Edit Exchange Rate list appears in
rates.
6.
The converted quantity appears in the To field.
Press EDIT (
the display showing U.S. Dollar (USD)-based exchange
Use the Navigation key to select the units to be converted
From and To.
4.
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
Press
to save the changed exchange rate. The
Exchange Rate list appears in the display.
7.
To change any other exchange rates, repeat Steps 3 – 6.
8.
Press the Cancel soft key to return to the Converter screen.
Tools
86
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The Exchange Rate list for the From
currency appears in the display.
3.
4.
Press the Add soft key. The Add Exchange Rate screen
Note: Press the
9.
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
appears in the display with the Base field highlighted.
1.
Use the Left/Right navigation key to select the Base
2.
Press the Down navigation key to highlight the Currency
Enter an identifier of up to 5 characters for the new
currency using the keypad. (For more information, refer to
“Entering Text” on page 38.)
7.
Highlight the Exchange Rate field.
8.
Enter a decimal exchange rate for the new currency using
the keypad.
87
From the Tools menu, select Converter ➔ Currency.
Press Rate. The Exchange Rate list for the From currency
appears in the display.
3.
Highlight the user-added currency exchange rate to be
erased.
field.
6.
To add the new exchange rate to the list, press SAVE.
Currency — Erasing Exchange Rates
currency to be converted from.
5.
key to enter the decimal point.
The Exchange Rate field only accepts up to five digits after the decimal
point.
4.
Press Erase. You are prompted to confirm the erasure.
Note: The Erase soft key is undefined for preloaded Exchange Rates. This
prevents you from erasing them.
5.
To erase the selected exchange rate, press Yes. To keep
the selected exchange rate, press No.
Tip Calculator
7.
Tip Calculator automatically calculates the
following amounts:
• Gratuity (tip)
• Individual payment (for groups)
The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
Calculations are based on the total amount
of the check, a selected gratuity
percentage, and the number of people
paying.
1.
From the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
2.
Enter the total amount of the bill using the keypad.
Note: To include a decimal point, press the
3.
key.
If needed, press the Down navigation key to highlight the
Tip field.
4.
Enter a tip percentage using the keypad.
5.
If needed, press the Down navigation key to highlight the #
Paying field.
6.
Enter the number of persons paying using the keypad.
Tools
88
Section 13: Change Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Settings Menu
䊳
To access the Settings menu, press Menu (
), then select
Settings. The Settings menu appears in the display.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
䊳
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
1.
From the Settings menu, select Location. The following
options appear in the display:
• Location On — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
89
From the Settings menu, select Display Settings. The
following options appear in the display.
Wallpaper
Wallpaper lets you choose the pictures that appear in your
phone’s displays while in standby mode.
1.
From the Settings menu, select Display Settings ➔
Wallpaper. The following options appear in the display:
• Main Screen
• Front Screen
Note: When you select Front Screen, your Wallpaper selection automatically
changes the Clock Format setting for the Front Clock to Off.
• Buy Wallpaper — Launches Alltel Web to let you download
additional images.
2. Select the sub-menu you wish to enter.
The following options appear in the display:
• My Images — Select a picture to appear in the background of the
display when the phone is in standby mode.
• Preset Images — Select a preset image to appear in the
background of the display when the phone is in standby mode.
• Image Shuffle — Select the Image Shuffle composed of selected
images to appear in the background of the display when the phone
is in standby mode.
Clock Format
Clock Format lets you choose whether to show the time in the
display in digital or analog format. You can set both the Main
Clock and the Front Clock.
1.
From the Settings menu, select Display Settings ➔ Clock
Format.
2.
Select Main Clock or Front Clock. The following options
appear in the display:
• Main Clock
• Front Clock
Note: The Clock Format setting for the Front Clock automatically changes to
Off when you change the Wallpaper setting for the Front Screen. (For
more information, refer to “Wallpaper” on page 89.)
3.
Highlight the desired setting, then press
to save the
setting.
Theme
Theme lets you select the color scheme your phone uses to
highlight menu items and scroll bar positions.
1.
From the Settings menu, select Display Settings ➔ Theme.
The following options appear in the display:
Change Your Settings
90
2.
Select the desired theme. You are returned to the Display
2.
Settings menu, now showing the selected theme.
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 38.)
Dialing Font Size
With Zoom-out enabled, Dialing Font Size adjusts the size of the
numbers that appear in the dialing screen when you dial more
than 10 digits. This lets you see as many of the digits you’ve
dialed as possible.
1.
From the Settings menu, select Display Settings ➔ Dialing
Font Size. The following options appear in the display:
• Normal
• Large
2. Select the desired dialing font size value.
Banner
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1.
From the Settings menu, select Display Settings ➔ Banner.
The Banner text entry screen appears in the display.
Note: If necessary, press and hold
91
Enter a word or short phrase (up to 12 characters) to
to erase an existing banner.
3.
Press
to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1.
From the Settings menu, select Display Settings ➔
Backlight. The following sub-menus appear in the display:
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
10, 15, and 30 Seconds and Always On (this setting uses much
more power than the timed settings).
• Keypad — Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 7, 10, 15, and
30 Seconds and Always On (this setting uses much more power
than the timed settings).
• Brightness — Use the Left and Right soft keys to select between
any of 6 optional settings.
• Charging Light — Sets the amount of time the main display
backlight remains on with the phone charging. Optional settings are
7, 10, 15, and 30 Seconds and Always On (this setting uses much
more power than the timed settings).
2. Select a Backlight option a setting for the option.
Options are:
Front Contrast
Set the Front (Sub) LCD contrast to your preference.
• Silence All
• Low/Medium
• Alarm Only
• Medium
• Vibrate
• Medium/High
• 1 Beep
• High
• Low
1.
At the Settings menu, select Display Settings ➔ Front
2.
Use the Left and Right navigation keys to adjust the
you wish. When you are satisfied with the setting, press
contrast for the Front Display. The results of your
SET (
adjustments appear in the display.
menu.
Contrast. The Front Contrast screen appears in the display.
3.
Press
to save your new contrast setting.
Sounds Settings
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.
Master Volume
You can set the master volume setting on your phone. This
setting if for all sounds other than the ring tones.
1.
From the Settings menu, select Sounds Settings ➔ Master
2.
Press the Navigation key Left or Right to select the setting
). Your phone returns to the Sounds Settings
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
1.
From the Settings menu, select Sounds Settings ➔ Ringer
Type.
The following options appear in the display:
• Voice Calls — Lets you set which ringtone, sound file, and/or one
of a set of ringtones and/or sound files plays when you receive a
voice call.
Volume.
Change Your Settings
92
• Messages — Lets you set which ringtone or sound file plays when
you receive a Text Message, Picture Message, and/or Voicemail
message.
• Buy a Ringtone — Connects you with the network and lets you
buy a ringtone.
2. Select the desired sub-menu. The following sub-menu
options appear in the display:
• For Voice Calls, the following options appear in the display:
– My Ringtones
– My Sounds
– Melody Shuffle (For more information, refer to “Setting Up
Shuffle” on page 69.)
• For Messages, the following options appear in the display:
– Text Message
– Picture Message
– Voicemail
3. Select the desired sub-menu option, then select the
desired ringer.
Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1.
93
From the Settings menu, select Sounds Settings ➔ Alerts.
The following Alerts options appear in the display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On/Off — Plays a melody when the phone is being turned
on or off.
2. Select the desired Alert option.
3.
Select the desired value for the selected Alert.
Key Tone
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1.
From the Settings menu, select Sounds Settings ➔ Key
Tone. The following sub-menus appear in the display:
• Tone Level (volume)
• Tone Length
2. Select the desired Key Tone sub-menu.
• For Tone Level, do the following:
– Use the Volume keys or Navigation key to set the keypad tones volume.
– Press
to save your setting and return to the Key Tone sub-menu.
• For Tone Length, do the following:
– Highlight Normal or Long.
– Press
to save your setting and return to the Key Tone sub-menu.
Vibrating Alert
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
1.
From the Settings menu, select Sounds Settings ➔
Vibrating Alert.
2.
menu.
Call Answer
You can select a specific answer mode when you receive an
incoming call.
From the Settings menu, select Call Settings ➔ Call
Answer.
The following call answer settings appear in the display:
• Any Key — Press any key except
or the Volume key to answer
an incoming call.
• Talk Key — Press
to answer an incoming call.
to answer an incoming
Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 94)
2.
Select the desired call answering method.
Call Alert
1.
From the Settings menu, select Call Settings ➔ Call Alert.
The following Call Alert settings appear in the display:
Select On or Off. You are returned to the Sound Settings
Call Settings
1.
• Flip Open — Open the flip or press
call.
• Ring Only — Phone rings for an incoming call.
• Caller ID + Ring — Phone rings and the display shows caller ID for
an incoming call.
• Name Repeat — Phone repeats displaying Contact name or caller
ID.
2. Select the desired call alerting method.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1.
From the Settings menu, select Call Settings ➔ Auto
Answer. The following settings appear in the display:
• Off — Disables automatic answering of calls
Change Your Settings
94
• After 1 Second — Phone automatically answers calls after 1
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
• After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Select the desired call automatic answering method.
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the power/accessory connector on the left side of
the phone. TTY Mode must be enabled before you can use your
phone with a TTY device.
1.
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1.
From the Settings menu, select Call Settings ➔ Auto Retry.
The following settings appear in the display:
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
2. Select the desired call automatic retrying method.
95
From the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the
current TTY Mode setting.
Note: The “Enabling TTY may impair headset use and non-TTY accessory
performance” message pops up when you select TTY Mode.
2.
To access the TTY Mode settings, press the Yes soft key. To
return to the Call Settings sub-menu, press the No soft key.
3.
If you press the Yes soft key, the following settings appear
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece
• TTY + Talk — Enables TTY mode and microphone
• TTY + Hear — Enables TTY mode and earpiece
• TTY Off — Disables TTY mode
4. Select the desired TTY Mode.
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1.
From the Settings menu, select Call Settings ➔ Voice
2.
Shortcut Key
Shortcut Key lets you set which feature, function, or application
launches when you press the Navigation key Up, Down, Left, or
Right while in standby mode.
1.
settings appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
2. Select the desired Voice Privacy setting.
Phone Settings
Airplane Mode
1.
From the Settings menu, select Phone Settings ➔ Airplane
Mode.The following settings appear in the display:
• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
At the Phone Settings sub-menu, select Shortcut Key ➔
Up Key / Right Key / Down Key / Left Key. The following
Privacy. The following settings appear in the display:
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
Select the desired Airplane Mode setting.
2.
• Alltel Shop
• Wallpaper
• Calculator
• Alltel Web
• My Ringtones
• Stop Watch
• Messages
• My Sounds
• Converter
• Inbox
• Calendar
• Tip Calculator
• Contacts
• Memo Pad
• Bluetooth
• Recent Calls
• Alarm Clock
• Music
• Voice Commands
• World Time
Select the desired setting.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
1.
From the Settings menu, select Phone Settings ➔
Language.
Change Your Settings
96
The following settings appear in the display:
• English
• Spanish
2. Select the desired Language setting.
Security
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1.
From the Settings menu, select Phone Settings ➔ Security.
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
3. Select the desired phone Lock mode setting.
Change Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
3.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then select Lock Phone. The following
phone Lock mode settings appear in the display:
97
Enter the lock code, then select Change Lock Code. You’re
prompted to enter the new lock code.
You’re prompted to enter the lock code.
2.
From the Settings menu, select Phone Settings ➔ Security.
Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
4.
Enter the new lock code again. Your new Lock Code is
stored.
Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.
Emergency #
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Store Emergency Numbers
1.
From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Emergency #.
3.
Select from the three emergency number entries.
4.
Enter an emergency number (up to 32 digits in length).
5.
Press
to save the number that you entered.
Call Emergency Numbers in Lock Mode
1.
In standby mode, enter the emergency number.
2.
Press
to place the call.
Reset Phone
Reset Phone returns all Settings to their factory default values.
1.
From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Note: The default lock code is the last four digits of your telephone number.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Change Your Settings
98
2.
Enter the lock code, then select Reset Phone. You are
prompted to confirm that you want to restore default
settings (except for the Contacts and Voice Dial).
• To return to the Security sub-menu without resetting the phone,
press the No soft key.
• To restore default settings, press the Yes soft key.
Erase All Contacts
Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
1.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then select Erase All Contacts. You are
prompted to confirm erasure of all Contacts entries.
Note: This procedure does not delete your Photo Gallery. The Photo Gallery
needs to be deleted separately.
3.
To erase all entries, press the Yes soft key. To keep the
current entries and return to the Security sub-menu, press
the No soft key.
99
Restrictions lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
1.
From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Restrictions.
3.
Select Outgoing Calls or Incoming Calls. The following
options appear in the display:
From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
2.
Restrictions
• Allow All — No restriction on selected calls.
• Allow None — Restrict (block) all selected calls.
• Allow Contacts — Restrict selected calls from/to numbers not in
your Contacts list.
4. Select the desired call Restrictions setting.
NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
1.
From the Settings menu, select Phone Settings ➔ NAM
Selection. The following options appear in the display:
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, this function is enabled. In digital service
mode, setting Airplane Mode to Off also disables Set Time. (For more
information, refer to “Airplane Mode” on page 96.)
off and back on.
System Select
The System Select menu allows you to select the roaming setting
for your phone.
1.
From the Settings menu, select Phone Settings ➔ System
Select.
The following roaming options appear in the display:
• Home only — Your phone is available for normal operation only
within your designated coverage area.
• Automatic-A — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital “A” system is acquired.
• Automatic-B — Your Wireless Provider’s PRL is used to acquire
service. If no preferred networks are found, any digital “B” system
is acquired.
2. Select desired roaming option.
Set Time
Use the Set Time option to set the current date and time.
1.
From the Settings menu, select Phone Settings ➔ Set Time.
The following options appear in the display:
• Set Date
• Set Time
2. Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Enter the current date using your keypad.
The month and day must be entered using two digits each. The year
must be entered using all four digits.
– Press
to save your date setting.
• For Set Time, the Set Time screen appears in the display.
– Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12/
24-hour format.
– Use the Left and Right navigation keys to select AM, PM, or 24 Hours.
– Press
to save the your time setting.
Quick Search
Quick Search is an easy way to locate Contacts.
Change Your Settings
100
1.
From the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
• On — Quick Search is enabled.
• Off — Quick Search is disabled.
2. Select the desired Quick Search setting.
Searching for a Contact
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the Contact name.
For example, to search for “Carol” you could enter:
C
2.
A
Press the Navigation key Up. The Find
screen appears in the display with
the first Contact name matching your
entry highlighted.
3.
Select the desired Contact and press
to call the Contact.
101
Memory Info
Memory Info lets you quickly and easily review and manage your
phone memory usage. To access Memory Info, do the following:
1.
From the Settings menu, select Memory Info.
The following information appears in the display:
• Total Used memory usage
• Available unused memory
• My Photos memory usage
• My Ringtones memory usage
• My Sounds memory usage
• Applications memory usage
2. Press
to return to the Memory Info menu.
Section 14: Phone Info
This section explains Phone Info options that let you identify the
hardware and software versions of your phone and let you
identify the phone number assigned to your phone.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1.
In standby mode, press MENU (
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1.
Your phone’s hardware and software version information
appears in the display.
Phone Info ➔ Phone Number. The phone number assigned
2.
To return to the Phone Info menu, press
), then select
Phone Info ➔ Version.
), then select
by your Wireless Provider appears in the display.
In standby mode, press MENU (
2.
To return to the Phone Info menu, press
.
.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1.
In standby mode, press MENU (
), then select
Phone Info ➔ Icon Glossary. A list shows of the icons that
can appear on the top line of the display.
2.
To return to the Phone Info menu, press
.
Phone Info
102
Section 15: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
103
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• Head: 1.09 W/Kg.
• Body-worn: 1.17 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp for more
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
104
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
105
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
Health and Safety Information
106
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
107
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
108
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
109
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Health Protection Agency:
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
Health and Safety Information
110
3.
Position your wireless phone within easy reach. Be able to
7.
may be distracting. Make people you are talking with
from the road. If you get an incoming call at an
aware you are driving and suspend conversations that
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
have the potential to divert your attention from the road.
8.
if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.
or medical emergencies.
9.
Use your wireless phone to help others in emergencies. If
Do not take notes or look up phone numbers while driving.
you see an auto accident, crime in progress or other
Jotting down a "to do" list or flipping through your address
serious emergency where lives are in danger, call 9-1-1 or
book takes attention away from your primary
other local emergency number, as you would want others
responsibility, driving safely.
6.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
weather conditions. Rain, sleet, snow, ice and even heavy
5.
Do not engage in stressful or emotional conversations that
access your wireless phone without removing your eyes
Dial sensibly and assess the traffic; if possible, place calls
to do for you.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
111
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
112
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
113
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet: http://www.cdc.gov
1-888-232-6348 TTY
Internet: http://www.cdc.gov/niosh/topics/noise/
default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
Health and Safety Information
114
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
115
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
Health and Safety Information
116
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
117
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Health and Safety Information
118
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
119
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
Health and Safety Information
120
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
121
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
122
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
123
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
Warranty Information
124
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
125
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
126
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
127
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
Warranty Information
128
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
129
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2009 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
130
Index
A
Accessing Your Phone’s Tools 72
Adding a New Contacts Entry 25
Airplane Mode 96
Alarm Clock 82
Set an Alarm 82
Turn Off the Alarm 83
When an Alarm Sounds 83
Alltel Shop 54
Auto Scroll 53
Auto View 53
Axcess Web
How Axcess Web Keys Work 56
Launching Axcess Web 55
Using Axcess Web 55
Using Links 56
B
Battery
Charging 4
Low Battery Indicator 5
Removal 6
Travel Adapter 5
131
Bluetooth
Add New Device 77
Registered List 78
Settings 78
Turn On/Off 76
C
Calculator 84
Calendar 79
Call Functions
Adjusting the Call Volume 20
Answering a Call 19
Call Log 20
Making a Call — Number Entry
Dialing 16
Making a Call — Speed Dialing 17
Making a Call — Voice Dialing 18
Call Settings
Auto Answer 94
Auto Retry 95
Call Alert 94
Call Answer 94
Camera
Brightness 65
Options 60
Photo Gallery 66
Save Pictures 60
Shooting Mode 61
Camera mode 15
Camera Options
Size 61
Contacts List
Open 25
Converters 85
Creating and Sending New Messages
Picture (Pic) Message 43
Text Message 42
D
Display Settings
Backlight 91
Banner 91
Clock Format 90
Dialing Font Size 91
Front Contrast 92
Theme Color 90
Wallpaper 89 90
,
E
Emergency Calls 16
Entering Text
Alpha (Abc) Mode 38 39
Entering Numbers 41
Entering Symbols 41
Entering Upper and Lower Case
Letters 40
Text Entry Modes 38
Exit Axcess Web 55
,
G
Gallery
Image 67
Gallery, photo 66
Getting Started
Activating Your Phone 5
Understanding this User Manual 4
Voicemail 7
H
HAC 115
Health and Safety Information 103
I
Icon Glossary 102
Image Shuffle
Setting Up 69
Wallpaper 89
In-Use Menu 20
K
Key Tone 93
L
Language 96
M
Making a Call
Number Entry Dialing 16
Quick Search Dialing 18
Speed Dialing 17
Voice Dialing 18
Making a Call — Quick Search
Dialing 18
Melody Shuffle
Ringer Type 92
Setting UP 70
Memo Pad 81
Memory Info 101
Menu Navigation
In-Use Options 20
Keypad Shortcuts 24
Return to Previous Menu 24
Message Folders
Drafts folder 50
Inbox 48
Messages and Lock Mode 49
Outbox 49
Voicemail 51
Message Send Options 46
Message Setting 52
Message Settings
General 52
Picture 53
Text 53
Messaging
Erasing Messages 51
Message Settings 52
Mode
Camera 15
M-Ratings 115
N
NAM selection 99
Navigation key shortcuts 24
Notes and tips 4
Notes, description 4
Number Entry Dialing 16
P
Phone
Command Keys 11
132
Display Screen 12
Display Screen Icons 12
Features 8
Modes 13
View, Open, Front 9
View,Closed 8
Phone Info
Icon Glossary 102
Phone Number 102
Version 102
Phone Number 102
Phone Safety 114
Phone Settings
Airplane Mode 96
Language 96
NAM selection 99
Quick Search 100
Set Time 100
Shortcut Key 96
System Select 100
Photos
Sending 58
Taking Multi Shot Pictures 58
Taking Snap Shots 57
Picture (Pic) message 43
133
Picture Messages
Send in Camera Mode 44
Q
Quick Search
Making a Call 18
Searching for a Contact 101
Setup 100
R
Receiving New Messages 46
While in a Call 47
Return to Previous Menu 24
Ringer Volume Setting 15
Roaming 23
S
SAR values 103
Save Pictures 60
Screen Layouts 59
Searching
For a Contact 101
Security Settings
Change Lock 97
Emergency # 98
Erase Contacts 99
Lock Phone 97
Resetting Your Phone 98
Restriction 99
Set Time 100
Settings
Call Settings 94
Display 89
Phone 96
Security 97
Sound 92
Setup
Location 89
Voicemail 47
Silent Mode 14
Sound Settings
Alerts 93
Key Tone 93
Master Volume 92
Ringer Type 92
Speakerphone Key 15
Speed Dialing 17
One-Touch Dialing 17
Three Touch Dialing 17
Two-Touch Dialing 17
Standard Limited Warranty 123
Standby Mode 14
Stop Watch 85
T
Taking Pictures 57
Text Conventions 4
Text message 42
Text Message Settings
Auto Scroll 53
Auto View 53
Tip Calculator 88
Tip, description 4
Tools
Alarm Clock 82
Bluetooth 76
Calculator 84
Calendar 79
Converter 85
Memo Pad 81
Stop Watch 85
Tip Calculator 88
World Time 83
Tools Menu
Accessing 72
T-Ratings 115
TTY Mode 95
U
UL Certification 104
Understanding Your Contacts 25
Adding a New Contact Entry 25
Deleting a Contact Entry 36
Editing an Existing Contact Entry 29
Finding a Contact Entry 28
Memory 37
Pauses 30
Using the Add New Contact Option 25
World Time 83
Y
Your Contacts List 25
V
Version 102
Voice Dialing 18
Voice Service
Adapt Digits 74
Command Tips 73
Commands 72
Making a Call 18
Settings 73
Sound 75
Voicemail
Checking 47
Listening To 7
Setup 47
W
Wallpaper 89
Warranty Information 123
134
Download PDF