Audio international | DVD-024-01/03-x | Operating instructions | Audio international DVD-024-01/03-x Operating instructions

Guide to Operations
Digital Video Disc Player
Model #’s: DVD-024-0x-x
Document #560037
7300 Industry Drive, North Little Rock, AR 72117
Phone: 501-955-2929 Fax: 501-955-2988
AUDIO INTERNATIONAL, INC.
8/99
The DVD-024-0x-x has been engineered to meet aircraft use requirements.
READ THIS MANUAL COMPLETELY BEFORE
OPERATING YOUR DIGITAL VIDEO DISC PLAYER
If you have any questions, please contact Audio International, Inc. See the last
page of this booklet for the nearest AI representative.
PROPRIETARY NOTICE: Despite any copyright notice, the data and information disclosed herein contains
confidential, proprietary designs owned by Audio International Incorporated. Neither this data nor the data
contained herein shall be reproduced, used or disclosed to anyone without the written authorization of Audio
International Incorporated.
2
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
(This page intentionally left blank)
3
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
8/99
AUDIO INTERNATIONAL, INC.
8/99
TABLE OF CONTENTS
Product Features………………………………………………………………………………………..
Warnings…………………………………………………………………………………………………
Cautions………………………………………………………………………………………………….
General Care…………………………………………………………………………………………….
Introduction………………………………………………………………………………………………
Illustration of Front Panel……………………………………………………………………………….
Infrared Remote Unit……………………………………………………………………………………
Operating Instructions…………………………………………………………………………………..
Basic Playback-Playing Back a Disc…………………………………………………………..
Basic Playback-Locating a Specific Title, Chapter, or Track……………………………….
Advanced Playback-Playing Repeatedly……………………………………………………..
Advanced Playback-Playing in a Favorite Order…………………………………………….
Advanced Playback-Zooming a Picture……………………………………………………….
Advanced Playback-Selecting the Camera Angle…………………………………………...
Advanced Playback-Selecting a Language…………………………………………………..
Advanced Playback-Selecting Subtitles………………………………………………………
Advanced Playback-Using the On-Screen Display………………………………………….
Function Setup-Customizing the Function Settings……………………….…………………
Function Setup-Setting the Parental Lock…………………………………………………….
Troubleshooting ……..………………………………………………………………………………….
Appendix……………………………………………………………………………….………………...
Authorized Representatives……………………………………………………………………………
4
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
Page #
5
6
7
8
9
10
11
12
12
15
17
18
20
21
22
23
25
26
32
35
36
38
AUDIO INTERNATIONAL, INC.
8/99
PRODUCT FEATURES
•
Custom Design for Aircraft:
Operates directly from 28 VDC
Compact, lightweight package
•
Multiple Control Options:
Optional infrared remote controllable
RS-485 digital data bus compatible
•
High Quality Output:
Audio: Hi-fidelity, Digital Stereo
Video: 720 Pixels/Horizontal Line
•
Playback Options:
Accepts DVD & Audio CD’s
8 Language & 32 Subtitle Options
Frame-by-frame Disc Advance
Choice of Camera Viewing Angles
Favorite Segment Programming
•
Product Compatibility:
Video Disc Sizes 8 cm or 12 cm (single or double sided)
Audio CD Disc Sizes 8 cm or 12 cm
DVD-024-01-x, Analog output only, NTSC only, Region 1
DVD-024-03-x, Analog output only, NTSC or PAL, Multi-Region
DVD-024-04-x, Digital output (optical) only, NTSC or PAL, MultiRegion
5
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
WARNINGS
•
DO NOT look directly into the laser beam through the disc tray,
etc. Eyesight may be damaged.
•
DO NOT place fingers in disc tray when the tray is moving.
Tray may close on fingers causing injury.
•
DO NOT attempt to open the cabinet.
qualified personnel.
•
DO NOT place foreign objects into openings. Contact with
foreign objects may result in dangerous voltage or electric
shock.
•
DO NOT place unit near strong magnetic fields.
•
DO NOT place unit near radiators and other heat sources.
STOP
6
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
Refer servicing to
AUDIO INTERNATIONAL, INC.
8/99
CAUTIONS
•
DO NOT drop the unit, subject it to heavy impact, or place heavy
objects on the unit.
•
DO NOT use this unit other than for its intended purpose. Doing so
might lead to electric shock or injury.
•
DO NOT use near water, moisture, or volatile sprays. Do not use
any type of solvent when cleaning (surface damage may occur).
•
DO NOT use in cold, unheated cabin area. Moisture condensation
may damage the internal parts. Wait for the cabin to warm.
•
DO NOT expose to sunlight or bright light. Damage to the sensor
will result.
CAUTION
7
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
GENERAL CARE
•
When playing a disc for the first time, check that there are no burrs stuck in the
center hole of the disc.
•
Do not touch the playback side of the disc. Do not apply tape to either side of the
disc.
•
Do not store discs in hot locations or in areas exposed to direct sunlight. Do not
store in damp moist areas.
•
Remove discs from the player and return to their cases after each use. Do not
stack loose discs or prop them against anything.
•
To clean dirty discs, wipe gently with a soft cloth. Start from the center of the
disc and move outward in a circular motion. Do not clean with solvents or other
chemicals.
•
Dust or fingerprints on the disc may cause sound or picture difficulties.
•
When cleaning heavy dirt from the unit, soak a soft cloth in a weak detergent
solution. Wring out excess liquid and gently wipe the unit. Dry the unit
thoroughly with a soft cloth. Do not use liquid or aerosol cleaners.
8
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
INTRODUCTION
•
Before setup or playing a disc, ensure that aircraft power is applied to the player. There
are no on/off controls on the unit.
•
Activate monitors and speakers from the appropriate control panels.
supplied through headphones and/or speakers per system design.
•
The names and functions of the DVD front panel are as follows:
Audio will be
1.
Open/Close Button - To eject or load a disc from or into the DVD unit onto the
disc tray.
2.
Play Button - To start playback of a DVD disc or audio CD.
3.
Skip (Forward) Button - To advance to the next track.
4.
Skip (Backward) Button – To skip to a previous track.
5.
Pause Button - To pause disc or CD playback.
6.
Stop Button - To stop the disc or CD.
9
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
ILLUSTRATION OF FRONT PANEL
Refer to the following illustration for location of the buttons on the front panel of the unit.
Front Panel Controls
Disc Insertion Slot
10
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
INFRARED REMOTE UNIT
Most of the advanced features outlined in this manual are
performed using the Infrared Remote Unit. Refer to this
diagram for button locations.
To replace the batteries, remove the battery compartment
cover on the back of the unit.
Load four (4) AAA batteries into the unit ensuring the
positive (+) and negative (-) terminals on the battery ends
match the markings inside the remote control unit.
For best results, use the remote control within
seven (7) meters of the remote infrared sensor
in the aircraft cabin.
11
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
OPERATING INSTRUCTIONS
Basic Playback - Playing Back a Disc
1.
To open the disc tray, press the OPEN/CLOSE button (
disc tray will eject forward.
) on the player. The
2.
To play a DVD or CD disc, place the desired disc on the disc tray with the
playback side down. Since the DVD will accept either an 8 cm or 12 cm disc,
ensure that the disc is placed on the correct guide. Press the OPEN/CLOSE
button. The disc tray closes and playback starts.
3.
To start playback from a menu screen using the remote , press
/
/
/
or the number buttons to select the desired title. Press ENTER. The DVD video
player starts playback from the selected title.
4.
To pause playback (still mode), press the Pause/Step button
during
playback. To resume normal playback, press the PLAY button. Audio is muted
during still mode.
5.
To stop playback, press
. The DVD player returns to chapter 1 or track 1.
12
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
6.
To remove the disc, press the OPEN/CLOSE button (
). Remove the disc
after the disc tray opens completely. Be sure to press the OPEN/CLOSE button
to close the disc tray after the disc has been removed.
7.
Discs may be played x2, x8, or x30 the normal speed, although sound and
subtitles are not included in the high-speed playback of DVD discs. However,
when audio CD’s are played back using fast-forward or fast-reverse, sound is
audible.
To play back a disc at x2 the normal speed, during normal playback, press REV
(
) button or FWD (
) button. The playback becomes x2 the normal
speed. Each time you press the REV or FWD button, the playback speed
changes. Repeat preceding steps to play back a disc at x8 or x30 the normal
speed. Press PLAY to resume normal playback.
8.
To advance a DVD video disc frame by frame, press
during still mode.
Each time the PAUSE/STEP button is pressed, the picture advances one frame.
To resume normal playback, press PLAY ( ).
13
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
9.
To play back a DVD disc in slow motion, during playback, press the SLOW
button. The playback speed will reduce to half of the normal speed. Each time
the SLOW button is pressed, the slow-motion speed changes: 1/2 normal speed,
1/8 normal speed, 1/16 normal speed. To return to normal playback, press the
PLAY ( ) button. Audio is muted during slow-motion playback.
10.
To stop playback and resume from the same location, press
(STOP) at the
location desired. The DVD video player memorizes the location where playback
was stopped. Press LAST
to resume playback from the aforementioned
location. The LAST PLAY function is canceled when the DVD disc has been
ejected, an adjustment or change is made to the parental lock function, or a disc
menu language setting is made.
14
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Basic Playback - Locating a Specific Title, Chapter, or Track
1.
To locate a specific title using the title menu function, press TITLE on the remote.
The title menu appears on the monitor screen. Press
/
/
/
to select
the desired title. If the titles in the title menu are assigned a number, the
selection can be directly selected by pressing its assigned number with the
number buttons. Press ENTER. The DVD player starts playback from chapter 1
(track 1) of the selected title. If different instructions appear on the monitor,
follow the monitor screen instructions. If the title menu is displayed during
playback and the TITLE button is pressed again without selecting any title, the
DVD video player resumes playback from the point where the TITLE button was
first pressed.
2.
To locate a specific title by title number, press “T”. Press the corresponding
number buttons on the number keypad for the desired title. Press PLAY (
)
to start playback from chapter 1 of the selected title. The highlight next to the
TITLE and CHAPTER can be shifted by pressing the
/
buttons. Pressing
the CLEAR button resets the TITLE and CHAPTER numbers. To clear the
TITLE, CHAPTER display, press the “T” button several times.
15
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
3.
To locate a specific chapter or track number, press “T”. Press
to highlight the
space next to CHAPTER. Press the corresponding number buttons on the
number keypad of the chapter or track desired. The +10 button may be utilized
to select numbers from 10 through 99. Press PLAY ( ) to start playback from
the selected chapter or track. To locate a specific track number on an audio CD,
press the corresponding number buttons of the chapter or track on the number
keypad. Press PLAY (
) to start playback from the chapter or track selected.
4.
To locate consecutive chapters or tracks, press SKIP
or
repeatedly to display the chapter or track number desired. The DVD player starts
playback from the selected chapter or track. When the SKIP
button is
pressed, the DVD player starts playback from the beginning of the current
chapter or track. When the SKIP
button is pressed twice, the DVD player
starts playback from the beginning of the preceding chapter or track. Press the
SKIP
to locate succeeding chapters or tracks.
5.
To locate a specific location within a title, press the “T” button twice. Press the
number buttons on the number keypad to enter a time (hours, minutes, seconds).
Press PLAY ( ) to start playback from the specified location.
16
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Advanced Playback-Playing Repeatedly
1.
To repeat a title, chapter or track, select the title/chapter/track you want to repeat.
Press REPEAT. Each time the REPEAT button is pressed, the repeat mode
changes as follows:
a.
DVD video disc
Chapter Repeat – repeats the same chapter
Title Repeat – repeats the same title
Repeat Off – resumes normal playback
b.
Audio CD
Track Repeat – repeats the same track
All Repeat – Repeats the entire disc
Repeat off – resumes normal playback
To resume normal playback, press CLEAR.
Œ
Œ
Œ
Œ
Œ
Œ
2.
To repeat a specific segment repeatedly, press A-B RPT at the beginning of the
segment (point A) you want to play repeatedly. Press A-B RPT again at the end
of the segment (point B). The DVD video player automatically returns to point A
and starts repeat playback of the selected segment (A-B). To resume normal
playback, press CLEAR. (NOTE: A segment can only be specified within the
current title.)
17
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Advanced Playback - Playing in a Favorite Order
1.
The DVD player automatically plays back titles, chapter, or tracks in the order in
which they were programmed. Insert a disc into the player and press MEMORY
while the player is in the stop mode. The following menu will appear on the
monitor screen:
MEMORY
SELECT
1. T - - C - -
6. T - - C - -
2. T - - C - -
7. T - - C - -
3. T - - C - -
8. T - - C - -
4. T - - C - -
9. T - - C - -
5. T - - C - -
EXIT RETURN
10. T - - C - NEXT
PRESS (0) – ( 9)
ENTER SET
T: Title number
C: Chapter number
18
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
2.
8/99
Select the items desired in order by pressing the number buttons corresponding
with the selection, then ENTER each item. Each time the
or
button is
pressed, the – indication next to T and C will be highlighted in turn. Highlight the
desired selection then press the corresponding number buttons.
If the MEMORY button is pressed during memory playback, the programmed
items will be displayed. The title, chapter, and track numbers not included on the
disc cannot be selected. If the MEMORY or RETURN button is pressed while
the MEMORY menu appears on the monitor screen, the MEMORY menu
disappears. The programmed items will be cleared when the DVD video player
is turned “off” or if the disc is removed.
Press PLAY while the MEMORY menu appears on the monitor screen and the
DVD video player will start memory playback.
3.
To change the programmed items, while the MEMORY menu appears on the
monitor screen, press
or
to move the highlighted bar to the item to be
changed. Change the item following the instructions above.
19
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
4.
To cancel the programmed items, while the MEMORY menu appears on the
monitor screen, press
or
to move the highlighted bar to the desired
selection. Press the CLEAR button.
5.
To resume normal playback from memory playback, press the CLEAR button
and the MEMORY indicator will disappear.
Advanced Playback - Zooming a Picture
1.
An area within a picture can be magnified. Press ZOOM during normal playback
or slow motion. The DVD video player will magnify in the center of the picture.
By pressing
/
/
/
during zoom playback, the zoom point shifts. If the
zoom point reaches the limit, the color of “ZOOM” changes. If the CLEAR button
is pressed, the zoom point will return to the center of the picture.
The Zoom function does not work during still playback. Zoom does not work on
the sub-pictures such as subtitles or menu screens included on DVD video discs.
3.
To resume normal playback, press ZOOM during zoom playback.
20
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Advanced Playback - Selecting the Camera Angle
1.
Some DVD titles include scenes shot from multiple camera angles. While
playing back a title that contains at least one scene recorded from multiple
angles, the angle icon indicator illuminates in the DVD display. To use this
feature, press ANGLE while playing back a scene recorded with multiple angles.
Press the ANGLE button while the angle icon in the DVD display is flashing.
Press ANGLE or
button while the angle number appears on the monitor
screen. Each time the ANGLE or
button is pressed, the camera angle
changes. The
button cycles backwards. The camera angle can be changed
directly by pressing the number buttons corresponding to its angle number
instead of using the
or
buttons.
The camera angle can be changed during still playback. The camera angle
changes to the new setting when normal playback is resumed.
2.
To turn “off” the angle number indication, press CLEAR.
21
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Advanced Playback - Selecting a Language
1.
A preferred language and sound recording system can be selected from those
included on the DVD video disc. Press AUDIO during playback.
AUDIO 1
ENG
PCM
2CH
Current audio
setting
Audio
Channel
Recording system
Language
Position Number
The abbreviation of the language appears instead of the language name. Refer
to the appendix for the list of languages and their abbreviations.
2.
Press AUDIO or
button while the audio setting appears on the monitor screen.
Each time the AUDIO or
is pressed, the audio settings included on the DVD
video disc change accordingly. (The
button cycles backwards.) When the
DVD video player or a disc is replaced, the player returns to the initial default
setting. When a sound that is not included on the disc is selected, the DVD video
player plays a prior sound programmed on the disc.
4.
To turn “off” the audio setting indication, press CLEAR.
22
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Advanced Playback - Selecting Subtitles
1.
Displayed subtitles can be selected from those included on the DVD video disc.
Press SUBTITLE ON/OFF during playback to activate subtitles. The current
subtitle setting appears at the top of the screen for approximately 3 seconds. To
turn off the subtitles, press SUBTITLE ON/OFF and the subtitles disappear.
Some DVD video discs are set to display subtitles automatically, and cannot be
turned “off” even if the subtitle function is “off”. During some scenes, the subtitles
may not appear immediately after the SUBTITLE ON/OFF button is pressed.
2.
To select a Subtitle Language, press SUBTITLE during playback. The
abbreviation of the language appears instead of the language name. Refer to
the appendix for languages and their abbreviations. Press SUBTITLE or
button while the subtitle setting appears on the monitor screen. Each time the
SUBTITLE or
button is pressed, the subtitle languages included on the DVD
video disc will change. (The
cycles backwards.)
3.
To turn “off” the subtitle setting indication, press CLEAR. When the DVD video
player is turned “on” or a disc is replaced, the player returns to the initial default
setting. When a subtitle language which is not included on the disc has been
selected, the DVD video player plays a prior language programmed on the disc.
During some scenes, the subtitles may not appear immediately after the subtitle
language has been changed by pressing the
or
buttons.
23
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Advanced Playback - Using the On-Screen Display
1.
The current title number, track number, and total playing time of the disc can be
viewed on the monitor screen. Press DISPLAY during the stop mode. The
current title number, first chapter number in the current title and operational
status will be displayed. When an audio CD is in the DVD video player, the
TOTAL indicator and total playing time of the disc will appear on the monitor
screen.
2.
To turn “off” the on-screen display, press DISPLAY again.
3.
During playback for DVD’s, press DISPLAY for the on-screen display feature to
indicate the current title number, the current chapter number, the remaining time
in the current title, the remaining time in the current chapter, and the elapsed
time of the current title appear in the on-screen display. Press DISPLAY again
during playback and the on-screen display turns “off”.
4.
During playback for audio CD’s, press DISPLAY for the on-screen display feature
to indicate the current track number, the remaining time in the current track, the
remaining time of the disc, and the elapsed time of the current track appear in the
on-screen display. Press DISPLAY again during playback and the on-screen
display turns off.
24
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Function Setup-Customizing the Function Settings
1.
Displaying the SET UP MENU screen:
The default settings can be changed to customize the performance to your
preference.
SET UP MENU
AUDIO SETTING
FUNCTION
DISPLAY
The SET UP MENU screen will ask you to select a setting category from AUDIO
SETTING, FUNCTION and DISPLAY. The selected category will provide the
setting details using the succeeding screen.
Press SET UP during the stop mode. The SET UP MENU screen will appear.
Press
or
buttons to select the category. Press ENTER. The SET UP
MENU screen disappears if the SET UP button is pressed while it is displayed.
25
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
2.
8/99
To Specify Audio Settings:
After selecting AUDIO SETTING on the SET UP MENU screen, press
or
to select the item. Press ENTER. The setting screen of the selected item will
appear.
When AUDIO is selected, select a preferred language by pressing
/ /
/
and then press ENTER. Some DVD video discs contain special output sound
that describe the actions on-screen for visually impaired persons. When you set
the DESCRIPTIVE SERVICE setting to “on” by pressing the AUDIO button, the
DVD video player automatically plays back this special feature. Some DVD
video discs may not include pre-selected languages. In this case, the DVD video
player automatically plays back the disc’s initial language offering.
When AUDIO OUT SEL. Is selected, select the output sound type AC-3 or PCM
by pressing
or
and then pressing ENTER. Select the output sound type
according to the system connection.
26
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
When D RANGE CONTROL is selected, select “ON” or “OFF” by pressing
or
and then press ENTER. By selecting “ON”, the dynamic range is
reduced. By selecting “OFF”, the full dynamic range is maintained. This function
works on playback of Dolby Digital (AC-3) recorded discs only. The level of
Dynamic Range Reduction may differ depending on the DVD video discs.
The VOCAL KARAOKE setting is not intended for use with the DVD-024-0x-x
unit.
Press SET UP and the setting screen will disappear. If the RETURN button is
pressed while a menu appears on the screen, the screen will return to the
previous menu screen displayed.
3.
To Specify Function Settings:
After FUNCTION is selected on the SET UP MENU, press
or
to select the
item and press ENTER. The setting screen of the selected item will appear.
27
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
When BLACK LEVEL is selected, select a preferred black level by pressing
or
and then press ENTER. Normal is standard black level and enhanced
is expanded black level.
When TITLE STOP is selected, select “ON” or “OFF” by pressing
or
and then press ENTER. A selection of “OFF” allows the player to continue after
playback of a title is completed, and a selection of “ON” allows the player to stop
after playback of a title is completed.
The REMOTE CONFIRM setting is not intended for use with the DVD-024-0x-x
unit.
When OSD is selected, select “ON” or “OFF” by pressing
or
and then
press ENTER. A selection of “ON” allows for the operational modes to be
displayed on-screen (e.g. PLAY), and a selection of “OFF” allows for the
operational modes not to be displayed.
Press SET UP and the setting screen will disappear. If the RETURN button is
pressed while a menu appears on the screen, the screen will return to the
previous menu screen displayed.
28
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
4.
8/99
To Specify Display Settings:
After DISPLAY is selected on the SET UP MENU screen, press
or
and then press ENTER. The setting screen of the selected item will appear.
When SCREEN DISPLAY is selected, select a preferred language by pressing
or
and then press ENTER.
When TV SHAPE is selected, select the TV type by pressing
or
and then
press ENTER. 16:9 (WIDE) is selected when a 16:9 wide monitor is connected
and 4:3 (NORMAL) is selected when a 4:3 normal screen is connected. If
NORMAL is selected, select PS (Pan-Scan; displays pictures cropped to fill the
screen; either or both sides of the picture are cut off) or LB (Letter Box; displays
theatrical images with masking bars above and below the picture) by pressing
or
and then press ENTER.
When ANGLE ICON is selected, select “ON” or “OFF” by pressing
or
then press ENTER. If ON is selected, the angle icon automatically appears in
white on the monitor while a scene recorded from multiple angles is played back.
When the angle number is displayed on the monitor by pressing the ANGLE
button, the angle icon is lit in red. If OFF is selected, the angle icon is not
displayed.
29
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
When SUBTITLE is selected, select a preferred language by pressing / /
/
then press ENTER. Some DVD video discs contain special subtitles, an
enhancement of closed captioning for hearing impaired persons. When the set
EXTENDED FEATURES is “ON”, press the SUBTITLE button and the DVD video
player will automatically display these special subtitles. Some DVD video discs
may not include pre-selected language. In this case, the DVD video player
automatically displays subtitles consistent with the disc’s initial language setting.
When DISC MENU is selected, select a preferred language by pressing
/
/
/
then press ENTER. To change the language while a disc is
inserted, press the TITLE or MENU button to display the disc menu. Press the
SET UP button. If the disc menu has only one language, the display does not
appear. Press the SET UP button repeatedly to select the language. Press the
ENTER button. The disc menu is displayed in the selected language.
Press SET UP and the setting screen will disappear. If the RETURN button is
pressed while a menu appears o the screen, the previous menu screen will be
displayed.
30
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
Function Setup - Setting the Parental Lock
DVD video discs equipped with the parental lock function are rated according to their content.
The contents allowed by a parental lock level and the way a DVD video disc can be controlled
may vary from disc to disc. For example, if the disc allowed editing out of violent scenes
unsuitable for children and replace them with more suitable scenes, or lock out playback of the
disc altogether.
1.
To set the parental lock function, press SET UP during the stop mode. The SET
UP MENU will appear on the monitor screen. Press the number “9” on the
numerical keypad twice. The PARENTAL LOCK screen will appear on the
monitor.
2.
Press the number buttons on the numerical keypad to create a personal 4-digit
security code and then press ENTER. If a mistake is made before ENTER has
been pressed, press the CLEAR button and enter the 4-digit security code again.
3.
Press
or
to select “On” and press ENTER. A menu will appear on the
monitor screen. Press
or
to select the country whose standards were
used to rate the DVD video disc and press ENTER. Another menu will appear.
31
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
4.
8/99
Press
or
to select the parental lock level and press ENTER. DVD video
discs rated higher than the level selected cannot be played unless the parental
lock function has been cancelled. The parental lock level is equivalent to the
following USA movie ratings:
LEVEL 1:G
LEVEL 3:PG
LEVEL 4:PG13
LEVEL 6:R
LEVEL 7:NC-17
The parental lock levels for “CAN” (Canada) are included for future use. Check
the appropriate parental lock level when buying a DVD video disc equipped with
the parental lock feature.
5.
Press SET UP and the SET UP MENU will disappear.
6.
To change the parental lock level, press the number buttons on the numerical
keypad to enter the 4-digit security code. Return to step 3. If a mistake is made,
press the CLEAR button and enter the correct 4-digit security code.
32
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
7.
To change the 4-digit security code, follow step 1 in these instructions. Press the
STOP button four times while the security code menu appears on the monitor
screen. The 4-digit security code is cleared. Press the number buttons to create
a new 4-digit security code and press the ENTER button. Follow steps 3 – 6
above. DVD video discs may or may not respond to the parental lock settings.
Make sure this function works with the DVD video discs selected.
8.
To cancel the parental lock function, follows step 1 above. Press the number
buttons on the numerical keypad to enter the 4-digit security code and press the
ENTER button. Press
or
to select “OFF” and press the ENTER button.
The SET UP MENU will appear. Press the SET UP button. The SET UP MENU
disappears and the parental lock function is cancelled.
9.
If the RETURN button is pressed while a menu appears on the screen, the
previous menu screen will be displayed.
33
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
TROUBLESHOOTING
PROBLEM
Playback not functioning
Remote buttons not
operating
CAUSE
SOLUTION
Disc not in the disc tray
Insert a disc in the tray
Disc upside down or not aligned in
guide
Reposition disc
Incompatible disc in tray
Replace disc
Dirty disc
Clean the disc
Parental lock activated
Change or cancel parental lock feature
Menu on the monitor
Remote too far from sensor
Exit the current menu
Move closer to the sensor
Batteries weak or worn
Replace batteries
34
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
AUDIO INTERNATIONAL, INC.
8/99
APPENDIX
Languages and Abbreviations
Abbreviation
--CHI
DUT
ENG
FRE
GER
ITA
JPN
KOR
MAY
SPA
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
Language
None
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abknazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Abbreviation
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
Language
Bulgarian
Bihari
Bislama
Bengali
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Rhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Abbreviation
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
35
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
Language
Irish
Scot Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlinqua
Interlinque
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
AUDIO INTERNATIONAL, INC.
8/99
Abbreviation
Language
Abbreviation
KM
KN
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Napali
Norwegian
Occitan
Afan-Oromo
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
Language
Oriya
Panjabi
Polish
Pashto
Portuguese
Quechua
Rhaeto-Rom
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serba
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serian
Siswati
Abbreviation
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
WO
XH
ZU
36
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
Language
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukraninian
Urdu
Uzbek
Vietnamese
Wolof
Xhosa
Zulu
AUDIO INTERNATIONAL, INC.
8/99
AUTHORIZED REPRESENTATIVES
Audio International, Inc. – Home Office
7300 Industry Drive
North Little Rock, AR 72117
Phone (501) 955-2929
Fax (501) 955-2988
Audio International, Inc. – Midwest Operations
8925 West Maple Street, Suite #1
Wichita, KS 67209
Phone (316) 729-6499
Fax (316) 729-5697
Audio International, Inc. – Canadian Operations
200 Cote Vertu Road West
Dorval, Quebec H4S-1Y9
Phone (514) 636-8240, Ext 2459
Fax (514) 636-5298
Audio International, Inc. – Western Operations
1255 Aero Park Blvd.
Tucson, AZ. 82706
Phone (520) 294-7088
Fax (520) 294-4410
37
Document #560037, Rev. IR, Model No.: DVD-024-0x-x
Download PDF