CompactLogix L2 system drawings

CompactLogix L2 system drawings
4
3
Embedded
Communication Port
B
1
1769-L23-QBFC1B
Isolated Serial
Non-Isolated Serial
EtherNet/IP Connections
n/a
Memory
512KB
Embedded I/O
(pre-configured in
Logix 5000)
16 DC in, 16 DC out
4 Analog in,
2 Analog out.
4 High speed
counters (250KHz)
Expansion
2 Additional
1769 modules
CompactLogix Configuration
• Embedded Power Supply
• Embedded I/O 16 DC In, 16 DC Out,
4 Analog In, 2 Analog Out
4 High Speed Counters
CompactLogix Capacity
• L23-QBFC1B has 512K of memory and
supports 2 additional I/O modules or
1 additional comm/specialty module
• Supports Ladder Programming, Function Block
Diagram, Structured Text and Sequential
Function Chart
B
HMI Performance
12 tags/display and 200
alarm tags typical update
time is 1 sec
CompactLogix L23
QBFC-1B
PanelView Plus 600
HMI Capacity
• 25 screens
• 250 tags per screen
DeviceNet Configuration
• DeviceNet requires a power supply to
provide power to devices on the network.
• Several media options are available
• Can extend distance with repeaters
DeviceNet Capacity
• Up to 63 nodes
• Trunkline can be up to
500 m without repeaters
• Each device can be up to 6 m
(20 ft) from the trunk
DeviceNet
Cat. Number
2
PV+ 600
DeviceNet
Ultra 3000
CompactBlock I/O
Ultra 3000 Performance
• Intelligent high resolution
absolute encoders
• Automatic motor recognition
capability
• Sercos, DeviceNet and analog
communications
A
Ultra 3000 Capacity
• 100-480V AC Options, single
and three-phase input
• 7.5A to 150A peak current
capability
• Eight selectable general
purpose inputs
• Four selectable general purpose
outputs and relay output
Ultra 3000 Configuration
• 7 segment LED for status
and error codes
• Configuration with Ultraware
• Serial port for RS-232/RS-485
communications
• Indexing drive option
PowerFlex 4-Class Capacity
• 0.5 - 15 HP
• 120V - 600V
• 24vDC digital I/O
• Analog I/O
1606
Power Supply
Point I/O
PowerFlex 4-Class Performance
• V/Hz or SVC (PowerFlex40/40P)
• Slip compensation
40:1 speed range
• "Multi-Drive" feature allows up to
5 drives per node
• Serial peripheral interface
(19.2K bps)
Point I/O Capacity
• The maximum is 63 Point I/O modules per adapter
• The adapter supplies 1 amp of current to the
Point I/O backplane, enough for
13 digital I/O modules.
•To connect additional I/O modules, add 1734-EP24VDC
Expansion Power Units as needed. Each one passes
1.3 amps of current to the modules on its right -enough for 17 digital modules.
• Other I/O modules draw more current so refer to
the published specs.
Note: Performance is what we tested,
not the max capacity
3
E3
Overload
PowerFlex 4-Class Configuration
• Built-in operator display for
configuration and monitoring
• Remote (Nema 1 & 4) HIM
options
• DriveExecutive software
tool options
Publication IASIMP-QR011B-EN-P – September, 2011
Superseded IASIMP-QR011A-EN-P – April, 2008
4
Ultra 3000
PowerFlex 4Component Class Drive
2
CompactBlock I/O
• Base blocks contain a maximum of
16 digital or 4 analog I/O.
• Built-in DeviceNet or PROFIBUS DP
network adapter.
•Thermocouple and RTD base blocks are
also available.
• CompactBlock LDX digital I/O base blocks
support up to three expansion blocks, for a
maximum of 64 I/O points
• Inputs and outputs are powered by an
external 24V dc source that is independent
of the network.
L23 DeviceNet
Drawing
1
A
Bill of Material
Qty
Catalog #
Description
Qty
Catalog #
System: Controller Hardware
1
1769-L23
COMPACTLOGIX L23-QBFC1B PROCESSOR
1
2711P-T6C5D PANELVIEW PLUS 600 COLOR TOUCH
TERMINAL, RS232 & USB, DC PS
HMI Hardware
Distributed I/O Hardware - Point I/O
1
1734-ADN
1734 DEVICENET ADAPTER
1
1734-FPD
FIELD POTENTIAL DISTRIBUTOR
1
1734-IA2
120 VAC 2 CHANNEL INPUT MODULE
1
1734-OA2
120/230 VAC 2 CHANNEL OUTPUT
2
1734-TB
MODULE
MODULE BASE W/ REMOVABLE
IEC SCREW TERMINALS
Distributed I/O Hardware - CompactBlock
1
1790D-T4T0 DNET LDX 4 INPUT THERMOCOUPLE
BASE TERMINAL BLOCK
1
1790-T16BVOVX 24 LDX, VDC 16 UNIVERSAL IN
EXPANSION TERMINAL BLOCK
1
1790-TOW8X 8 LDX, RELAY OUTPUT EXPANSION
TERMINAL BLOCK
1
2098-DSD-XXX 25A 460V, Three-phase with
DeviceNet
PanelView Plus
Description
Drive Hardware
1
22A-A1P5N114
POWERFLEX 4 DRIVE
1
22-COMM-D POWERFLEX 4DEVICENET INTERFACE
1
22-XCOMM-DC
EXTERNAL DSI COMM BASE KIT
Note: PowerFlex drives come in many variations - before
ordering, you will need to identify voltage rating, horsepower,
enclosure type. In addition, you may wish to add on optional equipment, such as HIM module or Brake Resister. Please refer to the
PowerFlex Selection Guide for additional details on
selecting the right drive for you application.
1
2098-DSD-XXX 25A 460V, Ultra 3000 Drive
Three-phase with DeviceNet
Qty
1
Catalog #
Description
Distributed Devicenet Devices
193-EC1AB
E3 ELECTRONIC OVERLOAD
RELAY, 100-C09...C23, 1-5A
CONFIGURATION TOOL REQUIRED
1
9324-RLS200ENE*
RSLOGIX 5000 MINI
LADDER ONLY
Note: CompactLogix Controllers can be programmed using
RSLogix 5000 Mini, Lite, Standard, or Pro. If you plan to use the
four programming languages purchase the Lite edition.
1
9701-VWM015AENE FACTORY TALK VIEW
MACHINE EDITION
1 9357-DNETL3
RSNETWORX FOR DEVICENET
About this Configuration: L23 DeviceNet System
This CompactLogix based system with two integrated serial ports and an add-on DeviceNet communication module
offer an economical solution to serve a variety of applications. It matches the basic layout of a classic control
system, but provides the functionality of the Integrated Architecture.
About the Products
Logix Controllers
• A common set of controls, networks, and programming software available in multiple hardware platforms
• Multiple control disciplines in a single controller - sequential / drives / process
• Multiple Program Languages available in all controllers - Ladder Diagram, Function Block, Structured Text,
and Sequential Function Chart
• Embedded RS-232 port provides remote access as well as ASCII, DH-485, DF-1,
Modbus Master/Slave and bridging to other networks enabling remote device configuration
• Tag-based architecture instead of addresses
•
•
•
•
Reuse tags from Logix controllers by choosing them from a list
4” – 15” screen sizes available
Touchscreen, keypad or combination
Integrated EtherNet/IP and RS-232 communications (most models), add-on communications for
many other networks
• Advanced Operator Interface features such as trending, expressions, data logging, animation.
CompactBlock LDX I/O
•
•
•
•
•
•
CompactBlock LDX I/O is ideally suited for light industrial and commercial applications.
Compact design of hardware lets it fit into shallow enclosures and confined areas.
DeviceNet and PROFIBUS DP are supported.
Up to 64 points can be addressed on a single network node.
I/O types include AC/DC, analog, RTD, and thermocouple.
Choice of D-shell connector for convenient disconnection or fixed screw terminals for I/O connections.
PowerFlex Drives
•
•
•
•
Serves applications ranging from 0.2 kW (0.25 hp) to 6,770 kW (9,000 hp).
Common set of networks, operator interface and programming for all PowerFlex drives
Communication Options – Ethernet/IP, ControlNet, Devicenet, DH Plus, RIO, 3rd party networks
Hundreds of pieces of status and diagnostic information are shared with Logix controllers directly
Point I/O
•
•
•
•
•
Available in IP-20 or IP-67 styles
Densities from 2-8 points per module
Removable screw or spring terminals without rewiring
Mounts horizontally or vertically with no derating required
Supports EtherNet/IP, ControlNet, DeviceNet and 3rd party networks
Ultra 3000
• 230V serves applications from 0.5 to 15kW, continuous output current 2.5 to 65 Amps with peak
output current from 7.5 to 150 Amps.
• 460V serves applications from 3 to 22 kW, continuous output current from 7 to 47 Amps with peak
output current from 14 to 94 Amps.
• Built-in support for multi-turn absolute encoders with option to supply external logic power to maintain
position during power loss.
• Ultra 3000i's built-in indexing capability can eliminate the need for a motion controller or PLC Card
for point to point positioning moves.
• RSLogix 5000 is only software required for both sequential and motion control.
For More Information and Help
For more information contact your local distributor or Rockwell Automation sales representative.
• www.ab.com
• Publication Library
• My Support
• A – Z Product Directory
4
3
2
1
CompactLogix L2 Comparison
1769-L23E-QB1B
1769-L23E-QBFC1B
Embedded
Communication Port
Insolated Serial
EtherNet/IP with
(MSG + I/O)
Insolated Serial
EtherNet/IP with
(MSG + I/O)
EtherNet/IP Connections
8 TCP/IP-32 CIP
8 TCP/IP-32 CIP
Memory
512KB
512KB
Embedded I/O
(pre-configured in
Logix 5000)
16 DC in.
16 DC out.
16 DC in, 16 DC out
4 Analog in,
2 Analog out.
4 High speed
counters (250KHz)
Expansion
2 Additional
1769 modules
2 Additional
1769 modules
CompactLogix Capacity
• L23E-QBFC1B has 512K of memory and
supports 2 additional I/O modules or
1 additional comm/specialty module
• Supports Ladder Programming, Function Block
Diagram, Structured Text and Sequential
Function Chart
Ethernet Performance
EtherNet/IP provides
excellent drive and I/O
control performance
along with HMI,
information processing
and many commercial
technologies.
CompactLogix Configuration
• Embedded Power Supply
• Embedded I/O 16 DC In, 16 DC Out,
4 Analog In, 2 Analog Out
4 High Speed Counters
B
CompactLogix L23E
I/O
QBFC1B
I/O
B
Cat. Number
CompactLogix Performance
• Ethernet/IP connections:
8 TCP/IP - 32 CIP
PanelView Plus 600
HMI Capacity
25 screens
250 tags per screen
PV+ 600
1 2
3 4
HMI Performance
12 tags/display and 200 alarm
tags typical updage time
is 1 sec
1 2
3 4
Stratix 6000
PowerFlex 4-Class Configuration
• Built-in operator display for
configuration and monitoring
• Remote (Nema 1 & 4) HIM
options
• DriveExplorer and
DriveExecutive software
tool options
PowerFlex 4Component Class
Drive
A
PowerFlex 4-Class Capacity
• 0.5 - 15 HP
• 120V - 600V
• 24vDC digital I/O
• Analog I/O
• Internal EtherNet/IP
adapter on PowerFlex 40
PowerFlex 4-Class Performance
• V/Hz or SVC (PowerFlex 40/40P)
• Slip compensation
• 40:1 speed range
• EtherNet/IP allows complete
access to data in drive
• "Multi-Drive" feature allows up to
5 drives per node
• Serial peripheral interface
(19.2K bps)
Note: Performance is what we tested,
not the max capacity
Publication IASIMP-QR011B-EN-P – September, 2011
Superseded IASIMP-QR011A-EN-P – April, 2008
4
Point I/O
Point I/O Capacity
• The maximum is 63 Point I/O modules per adapter
• The adapter supplies 1 amp of current to the
13 digital I/O modules.
• To connect additional I/O modules, add 1734-EP24VDC
Expansion Power Units as needed. Each one passes
1.3 amps of current to the modules on its right -enough for 17 digital modules.
• Other I/O modules draw more current so refer to
the published specs.
3
2
A
L23E Drawing
1
Bill of Material
Qty
1
1
1
1
Catalog #
Description
System: Controller Hardware
1769-L23E COMPACTLOGIX L23E PROCESSOR
1769-IQ16
16 POINT 24 VD SINKING/
SOURCING INPUT MODULE
1769-OB16
16 POINT 24 VDC SOURCING
OUTPUT MODULE
2711P-T6C20D
HMI Hardware
PANELVIEW PLUS 600 COLOR
TOUCH TERMINAL,
ETHERNET/RS232, DC PS
Distributed I/O Hardware - Point I/O
1
1
1
1
1734-AENT
1734-FPD
1734-IA2
1734-OA2
2
1734-TB
1
1794-PS13
1734 ETHERNET/IP ADAPTER
FIELD POTENTIAL DISTRIBUTOR
120 VAC 2 CHANNEL INPUT MODULE
120/230 VAC 2 CHANNEL OUTPUT
MODULE
MODULE BASE W/ REMOVABLE
IEC SCREW TERMINALS
85-264 VAC TO 24 VDC 1.3A
POWER SUPPLY
Qty
1
1
About this Configuration: L23E System
Catalog #
Description
Drive Hardware
22A-A1P5N114
22-COMM-E
POWERFLEX 4 DRIVE
POWERFLEX 4 ETHERNET
INTERFACE
Note: PowerFlex drives come in many variations - before
ordering, you will need to identify voltage rating, horsepower,
enclosure type. In addition, you may wish to add on optional equipment, such as HIM module or Brake Resister. Please
refer to the PowerFlex Selection Guide for additional details
on selecting the right drive for you application.
CONFIGURATION TOOL REQUIRED
1
9324-RLS200ENE*
RSLOGIX 5000 MINI
LADDER ONLY
Note: CompactLogix Controllers can be programmed using
RSLogix 5000 Mini, Lite, Standard, or Pro. If you plan to use the
four programming languages purchase the Lite edition.
1
9701-VWM015AENE FACTORYTALK VIEW
MACHINE EDITION
1 9357-DNETL3
RSNETWORX FOR DEVICENET
This CompactLogix based system with integrated EtherNet/IP offers a single network solution for high-speed
I/O control, drive control and controller-to-controller interlocking as well as easy integration with the business system, the Internet and commercial Ethernet technologies. Devices connected to Ethernet/IP feature
embedded web pages that provide diagnostics information for troubleshooting from any standard web browser.
About the Products
Logix Controllers
• A common set of controls, networks, and programming software available in multiple hardware platforms
• Multiple control disciplines in a single controller - sequential / motion / drives / process
• Multiple Program Languages available in all controllers - Ladder Diagram, Function Block, Structured
Text,
and Sequential Function Chart
• Embedded RS-232 port provides remote access as well as ASCII, DH-485, DF-1, Modbus Master/Slave
and bridging to other networks enabling remote device configuration
• Tag-based architecture instead of addresses
PanelView Plus
•
•
•
•
Reuse tags from Logix controllers by choosing them from a list
4” – 15” screen sizes available
Touchscreen, keypad or combination
Integrated EtherNet/IP and RS-232 communications (most models), add-on communications for
many other networks
• Advanced Operator Interface features such as trending, expressions, data logging, animation.
PowerFlex Drives
•
•
•
•
Serves applications ranging from 0.2 kW (0.25 hp) to 6,770 kW (9,000 hp).
Common set of networks, operator interface and programming for all PowerFlex drives
Communication Options – Ethernet/IP, ControlNet, Devicenet, DH Plus, RIO, 3rd party networks
Hundreds of pieces of status and diagnostic information are shared with Logix controllers directly
Point I/O
•
•
•
•
•
Available in IP-20 or IP-67 styles
Densities from 2-8 points per module
Removable screw or spring terminals without rewiring
Mounts horizontally or vertically with no derating required
Supports EtherNet/IP, ControlNet, DeviceNet and 3rd party networks
For More Information and Help
For more information contact your local distributor or Rockwell Automation sales representative.
• www.ab.com
• Publication Library
• My Support
• A – Z Product Directory
4
3
2
1
CompactLogix L2 Comparison
1769-L23E-QB1B
Embedded
Communication Port
Insolated Serial
EtherNet/IP with
(MSG + I/O)
Insolated Serial
EtherNet/IP with
(MSG + I/O)
EtherNet/IP Connections
8 TCP/IP-32 CIP
8 TCP/IP-32 CIP
Memory
512KB
512KB
Embedded I/O
(pre-configured in
Logix 5000)
16 DC in.
16 DC out.
16 DC in, 16 DC out
4 Analog in,
2 Analog out.
4 High speed
counters (250KHz)
Expansion
2 Additional
1769 modules
2 Additional
1769 modules
B
1769-L23E-QBFC1B
CompactLogix Configuration
• Embedded Power Supply
• Embedded I/O 16 DC In, 16 DC Out,
4 Analog In, 2 Analog Out
4 High Speed Counters
CompactLogix Capacity
• L23E-QB1B has 512K of memory and supports
2 additional I/O modules or 1 additional
comm/specialty module
• Supports Ladder Programming, Function Block
Diagram, Structured Text and Sequential
Function Chart
B
CompactLogix L23E
HMI Performance
12 tags/display 200 alarm
tags typical update time
is 1 sec
DeviceNet Configuration
• DeviceNet requires a power supply to
provide power to devices on the network.
• Several media options are available
• Can extend distance with repeaters
DeviceNet Capacity
• Up to 63 nodes
• Trunkline can be up to
500 m without repeaters
• Each device can be up to 6 m
(20 ft) from the trunk
DeviceNet
Cat. Number
PanelView Plus 600
HMI Capacity
• 20 screens
• 250 tags per screen
DeviceNet
PV+ 600
Ultra 3000
CompactBlock I/O
Ultra 3000 Performance
• Intelligent high resolution
absolute encoders
• Automatic motor recognition
capability
• Sercos, DeviceNet and analog
communications
A
Ultra 3000 Capacity
• 100-480V AC Options, single
and three-phase input
• 7.5A to 150A peak current
capability
• Eight selectable general
purpose inputs
• Four selectable general purpose
outputs and relay output
Ultra 3000 Configuration
• 7 segment LED for status
and error codes
• Configuration with Ultraware
• Serial port for RS-232/RS-485
communications
• Indexing drive option
PowerFlex 4-Class Capacity
• 0.5 - 15 HP
• 120V - 600V
• 24vDC digital I/O
• Analog I/O
1606
Power Supply
3
E3
Overload
Point I/O
PowerFlex 4-Class Configuration
• Built-in operator display for
configuration and monitoring
• Remote (Nema 1 & 4) HIM
options
• DriveExecutive software
tool options
PowerFlex 4-Class Performance
• V/Hz or SVC (PowerFlex 40/40P)
• Slip compensation
40:1 speed range
• "Multi-Drive" feature allows up to
5 drives per node
• Serial peripheral interface
(19.2K bps)
Point I/O Capacity
• The maximum is 63 Point I/O modules per adapter
• The adapter supplies 1 amp of current to the
Point I/O backplane, enough for
13 digital I/O modules.
•To connect additional I/O modules, add 1734-EP24VDC
Expansion Power Units as needed. Each one passes
1.3 amps of current to the modules on its right -enough for 17 digital modules.
• Other I/O modules draw more current so refer to
the published specs.
Note: Performance is what we tested,
not the max capacity
Publication IASIMP-QR011B-EN-P – September, 2011
Superseded IASIMP-QR011A-EN-P – April, 2008
4
Ultra 3000
PowerFlex 4Component Class Drive
2
CompactBlock I/O
• Base blocks contain a maximum of
16 digital or 4 analog I/O.
• Built-in DeviceNet adapter.
•Thermocouple and RTD base blocks are
also available.
• CompactBlock LDX digital I/O base blocks
support up to three expansion blocks, for a
maximum of 64 I/O points
• Inputs and outputs are powered by an
external 24V dc source that is independent
of the network.
L23E withDeviceNet
Drawing
1
A
Bill of Material
Qty
Catalog #
Description
Qty
Catalog #
System: Controller Hardware
1
1769-L23
COMPACTLOGIX L23-QBFC1B PROCESSOR
Drive Hardware
1
HMI Hardware
1
2711P-T6C5D PANELVIEW PLUS 600 COLOR
TOUCH TERMINAL, PS232 & USB, DC PS
Distributed I/O Hardware - Point I/O
1
1734-ADN
1734 DEVICENET ADAPTER
1
1734-FPD
FIELD POTENTIAL DISTRIBUTOR
1
1734-IA2
120 VAC 2 CHANNEL INPUT MODULE
1
1734-OA2
120/230 VAC 2 CHANNEL OUTPUT
MODULE
2
1734-TB
MODULE BASE W/ REMOVABLE
IEC SCREW TERMINALS
Distributed I/O Hardware - CompactBlock
1
1790D-T4T0 DNET LDX 4 INPUT THERMOCOUPLE
BASE TERMINAL BLOCK
1
1790-T16BVOVX 24 LDX, VDC 16 UNIVERSAL IN
EXPANSION TERMINAL BLOCK
1
1790-TOW8X 8 LDX, RELAY OUTPUT EXPANSION
TERMINAL BLOCK
Description
22A-A1P5N114
POWERFLEX 4 DRIVE
1
22-COMM-D POWERFLEX 4DEVICENET INTERFACE
1
22-XCOMM-DC
EXTERNAL DSI COMM BASE KIT
Note: PowerFlex drives come in many variations - before
ordering, you will need to identify voltage rating, horsepower,
enclosure type. In addition, you may wish to add on optional equipment, such as HIM module or Brake Resister. Please refer to the
PowerFlex Selection Guide for additional details on
selecting the right drive for you application.
1
2098-DSD-XXX 25A 460V, Ultra 3000 Drive
Three-phase with DeviceNet
Qty
1
Catalog #
Description
Distributed Devicenet Devices
193-EC1AB
E3 ELECTRONIC OVERLOAD
RELAY, 100-C09...C23, 1-5A
CONFIGURATION TOOL REQUIRED
1
9324-RLS200ENE*
RSLOGIX 5000 MINI
LADDER ONLY
Note: CompactLogix Controllers can be programmed using
RSLogix 5000 Mini, Lite, Standard, or Pro. If you plan to use the
four programming languages purchase the Lite edition.
1
9701-VWM015AENE FACTORY TALK VIEW
MACHINE EDITION
1 9357-DNETL3
RSNETWORX FOR DEVICENET
PanelView Plus
•
•
•
•
Reuse tags from Logix controllers by choosing them from a list
4” – 15” screen sizes available
Touchscreen, keypad or combination
Integrated EtherNet/IP and RS-232 communications (most models), add-on communications for
many other networks
• Advanced Operator Interface features such as trending, expressions, data logging, animation.
CompactBlock LDX I/O
•
•
•
•
•
•
CompactBlock LDX I/O is ideally suited for light industrial and commercial applications.
Compact design of hardware lets it fit into shallow enclosures and confined areas.
DeviceNet and PROFIBUS DP are supported.
Up to 64 points can be addressed on a single network node.
I/O types include AC/DC, analog, RTD, and thermocouple.
Choice of D-shell connector for convenient disconnection or fixed screw terminals for I/O connections.
PowerFlex Drives
•
•
•
•
Serves applications ranging from 0.2 kW (0.25 hp) to 6,770 kW (9,000 hp).
Common set of networks, operator interface and programming for all PowerFlex drives
Communication Options – Ethernet/IP, ControlNet, Devicenet, DH Plus, RIO, 3rd party networks
Hundreds of pieces of status and diagnostic information are shared with Logix controllers directly
Point I/O
•
•
•
•
•
Available in IP-20 or IP-67 styles
Densities from 2-8 points per module
Removable screw or spring terminals without rewiring
Mounts horizontally or vertically with no derating required
Supports EtherNet/IP, ControlNet, DeviceNet and 3rd party networks
Ultra 3000
About this Configuration: L23E with DeviceNet System
This CompactLogix based system with two integrated serial ports and an add-on DeviceNet communication module
offer an economical solution to serve a variety of applications. It matches the basic layout of a classic control
system, but provides the functionality of the Integrated Architecture.
About the Products
Logix Controllers
• A common set of controls, networks, and programming software available in multiple hardware platforms
• Multiple control disciplines in a single controller - sequential / drives / process
• Multiple Program Languages available in all controllers - Ladder Diagram, Function Block, Structured Text,
and Sequential Function Chart
• Embedded RS-232 port provides remote access as well as ASCII, DH-485, DF-1,
Modbus Master/Slave and bridging to other networks enabling remote device configuration
• Tag-based architecture instead of addresses
• 230V serves applications from 0.5 to 15kW, continuous output current 2.5 to 65 Amps with peak
output current from 7.5 to 150 Amps.
• 460V serves applications from 3 to 22 kW, continuous output current from 7 to 47 Amps with peak
output current from 14 to 94 Amps.
• Built-in support for multi-turn absolute encoders with option to supply external logic power to maintain
position during power loss.
• Ultra 3000i's built-in indexing capability can eliminate the need for a motion controller or PLC Card
for point to point positioning moves.
• RSLogix 5000 is only software required for both sequential and motion control.
For More Information and Help
For more information contact your local distributor or Rockwell Automation sales representative.
• www.ab.com
• Publication Library
• My Support
• A – Z Product Directory
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement