2 09-13

2 09-13
2 09-13
1
2 09-13
SUBJECT
DATE
Cooling System Drain Procedure
February 2013
Additions, Revisions, or Updates
Publication Number / Title
Platform
Section Title
Change
DDC-SVC-MAN-0081
DD Platform
Cooling System
Changed order of steps in procedure, added torque specifications
in last step.
All information subject to change without notice.
2 09-13 Copyright © 2013 DETROIT DIESEL CORPORATION
3
2 Cooling System Drain Procedure
2
Cooling System Drain Procedure
Drain as follows:
WARNING: PERSONAL INJURY
To avoid injury, never remove any engine component while the engine is running.
NOTE: Change the coolant only after the vehicle has cooled and no residual pressure is present.
1. Place the transmission in neutral and set the parking brake.
2. Remove the coolant reservoir cap.
3. Loosen the coolant drain plug (1) located on the left side of the engine block and attach a hose to the plug.
NOTICE: Coolant is a hazardous material and needs to be disposed in an environmentally responsible manner.
4. Collect the used antifreeze in a suitable container and if necessary, dispose of the solution in an environmentally
responsible manner according to state and federal Environmental Protection Agency (EPA) recommendations.
4
All information subject to change without notice.
Copyright © 2013 DETROIT DIESEL CORPORATION 2 09-13
2 09-13
5. Close drain plug. Torque to 30 N·m (22 lb·ft).
All information subject to change without notice.
2 09-13 Copyright © 2013 DETROIT DIESEL CORPORATION
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement