Do-more H2 Series PLC System Specifications General Specifications Operating Temperature

Do-more H2 Series PLC System Specifications General Specifications Operating Temperature
Prices as of April 15, 2015. Check Web site for most current prices.
Do-more H2 Series PLC System
Specifications
General Specifications
General Specifications
Operating Temperature
32°F to 131°F (0°C to 55°C)
Storage Temperature
–4°F to 158°F (–20°C to 70°C)
Ambient Humidity
30% to 95% relative humidity (non–condensing)
Environmental Air
No corrosive gases
Vibration
MIL STD 810C, Method 514.2
IEC60068-2-6
JIS C60068-2-6 (Sine wave vibration test)
Shock
MIL STD 810C, Method 516.2
IEC60068-2-27
JIS C60068-2-27
Noise Immunity
Agency Approvals
NEMA ICS3-304
UL508 (File No. E157382, E316037)
CE (EN61131-2)
Book 1 (14.2)
eDH-18
Do-more H2 PLCs
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
CPU Modules
Company
Information
Control Systems
Overview
CLICK PLC
Specifications
Feature
Total Memory (bytes)
Ladder Memory (instruction words)
V-Memory (words)
Non-volatile V Memory (words)
D-memory (DWORDs)
Non-volatile D Memory (DWORDs)
R-memory (REAL DWORDs)
Non-volatile R Memory (REAL DWORDs)
Boolean execution/K
Stage Programming
Number of Stages
Handheld Programmer
Programming Software for Windows
Built-In communications ports
Program Memory
Total I/O points available
H2-DM1
$299.00
Local I/O points available
Ethernet Remote I/O Discrete points
Ethernet Remote I/O Analog I/O Channels
Max Number of Ethernet slaves per Channel
I/O points per Remote Channel
Discrete I/O Module Point Density
Slots per Base
262,144 bytes
65,536 instruction words
Configurable up to 65536 (4096 default)
Configurable up to 65536 (4096 default)
Configurable up to 65536 (4096 default)
Configurable up to 65536 (4096 default)
Configurable up to 65536 (4096 default)
Configurable up to 65536 (4096 default)
50 uSec
Yes
128 per Program code-block; number of code-blocks configurable to memory limit
No
FREE Do-more Designer
USB, RS-232,
USB, RS-232
Ethernet (10/100 Base-T)
Flash ROM
X, Y, each configurable up to 65536 (2048 default); WX, WY (analog in/
out) each configurable up to 65536 (256 default)
256
131,072
32,768
16
32,768
3/4/6/9
>160
Control relays
Special relays (system defined)
Special registers (system defined)
Timers
Counters
System Date/Time structures
User Date/Time structures
ASCII String/Byte buffer structures
Configurable up to 65536 (2048 default)
DL Classic Client memory
Immediate I/O
Interrupt input (hardware / timed)
Subroutines
Drum Timers
Table Instructions
Loops
Math
ASCII
PID Loop Control, Built In
Time of Day Clock/Calendar
Run Time Edits
Supports True Force
Internal Diagnostics
Password security
System error log
User error log
Battery backup
>170
1024
512
Configurable up to 65536 (256 default)
Configurable up to 65536 (256 default)
8
Configurable up to 65536 (32 default)
Configurable up to memory limit (192 default)
Yes, configurable up to memory limit, default 1024 input bits, 1024 coil
bits, 2048 input registers, 2048 holding registers
Up to memory limit, default 512 X, 512 Y, 512 C, 2048 V
No
No
Program and Task code-blocks, up to memory limit
Yes, up to memory limit
Yes
FOR/NEXT, WHILE/WEND, REPEAT/UNTIL loops
>60 operators and functions: Integer, Floating Point, Trigonometric,
Statistical, Logical, Bitwise, Timing
Yes, IN/OUT, Serial, Ethernet TCP and UDP; 11 output script commands
Yes, configurable to memory limit (over 2,000)
Yes
Yes
Yes
Yes
Multi-user, credentialed, session-based security
Yes
Yes
Yes (Battery included)
Book 1 (14.2)
www.automationdirect.com/do-more-plcs
Do-more H2 PLCs
Do-More
PLCs Overview
Do-More H2
PLC
Do-More T1H
PLC
DirectLOGIC
PLCs Overview
DirectLOGIC
DL05/06
DirectLOGIC
DL105
DirectLOGIC
DL205
DirectLOGIC
DL305
DirectLOGIC
DL405
Productivity
Controller
Overview
Productivity
3000
4/8/12/16/32
Number of instructions available
Modbus Client memory
H2-DM1E
$399.00
H2-DM1E
H2-DM1
eDH-19
Universal
Field I/O
Software
C-More
HMI
C-More Micro
HMI
ViewMarq
Industrial
Marquees
Other HMI
Communications
Appendix
Book 1
Terms and
Conditions
Prices as of April 15, 2015. Check Web site for most current prices.
CPU Modules
H2-DM1
H2-DM1E
LED Status Indicators
PWR
RUN
ROM
Indicator
USB
TX
RX
ERR
PWR
H2-DM1
H2
2-DM1
2
DM1
RUN
H2-DM1TERM
RUN
N
USB
PGM
PWR
PORT
RUN
ROM
ERR
S-232
PWRRRS-232
S
ERIAL
SERIAL
H2-DM1E
H2
2-DM1E
2
DM1E
E
RUN
ROM
ERR
STOP
STO
OP
ETH
USB
TX
RX
RUN
USB
ETH
USB
TX
Book 1 (14.2)
ER
ER
TERM
E
USB
1 T
0
H
PGM
Do-more
H2 PLCs
/ E
PORT
1 R
0 N
Low Battery
Green
CPU is in RUN Mode
Yellow
Red
Forces are Active
CPU is updating Non-volatile
Memory
CPU Fatal Error
Green
Ethernet Link Good
Yellow
TX
RX
Yellow
Ethernet Activity
Green
USB Receive Activity
Yellow
USB Transmit Activity
Green
RS-232 Transmit Activity
Green
RS-232 Receive Activity
RX
Mode Switch Functions
Mode Switch Position
CPU Action
PORT
eDH-20
Base Power ON
STOP
PLC Mode
Switch
USB E
H2-DM1E
H2
2-DM1E
2
DM1E
PGM
RUN
Green
Yellow
ERR
ETH
H2-DM1E
ER
ER
TERM
RS-232
SERIAL
ROM
LED Indicators
Status
Description
STOP
RUN (Run Program)
CPU is forced into RUN Mode if no errors are encountered.
TERM (Terminal)
RUN, PROGRAM and DEBUG modes are available.
In this mode, the mode of operation can be changed
through the Programming Software.
STOP (Stop Program)
CPU is forced into STOP Mode.
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
CPU Modules
Company
Information
Control Systems
Overview
CLICK PLC
Communication Ports
Do-More
PLCs Overview
USB Port
Do-More H2
PLC
Used exclusively for programming and monitoring via a PC running
Do-more Designer.
Do-More T1H
PLC
USB Port Specifications
DirectLOGIC
PLCs Overview
Description
Standard USB 2.0 Slave input for programming and online
monitoring, with built-in surge protection. Not compatible
with older full speed USB devices.
Cables
USB Type A to USB Type B:
(ADC part #)
USB-CBL-AB3 (3 ft.)
DirectLOGIC
DL05/06
DirectLOGIC
DL105
USB-CBL-AB6 (6 ft.)
DirectLOGIC
DL205
USB-CBL-AB10 (10 ft.)
USB-CBL-AB15 (15 ft.)
DirectLOGIC
DL305
Pin
Description
1
2
3
4
5V
Bus Voltage Sense
D-
Data -
D+
Data +
0V
Ground
DirectLOGIC
DL405
Productivity
Controller
Overview
Productivity
3000
Universal
Field I/O
RS-232 Port
RJ-12 style connector used for:
• Connection to a PC running Do-more
Designer
• Modbus RTU Master connections
• Modbus RTU Slave connections
• ASCII Incoming and Outgoing
communications
• Custom Protocol Incoming and
Outgoing communications
RS-232 Port Specifications
Software
Baud Rates
C-More Micro
HMI
Description
Non-isolated, full duplex RS-232 DTE port used for programming, online
monitoring or can connect the CPU as a Modbus RTU or ASCII master or
slave to a peripheral device. Includes ESD and built-in surge protection.
1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
+5V Cable Power
Source
Maximum Output
Load (TXD/RTS)
Minimum Output
Voltage Swing
Output Short Circuit
Protection
Cable Options
220 mA maximum at 5V, +/- 5%. Reverse polarity and overload protected.
(ADC part #)
FA-CABKIT
C-More
HMI
ViewMarq
Industrial
Marquees
3 KV, 1,000 pf
+/-5V
Other HMI
+/-15 mA
Communications
D2-DSCBL
Appendix
Book 1
FA-ISOCON for converting RS-232 to isolated RS-422/485
Terms and
Conditions
Pin
1
2
3
4
5
6
Description
0V
Power (-) connection (GND)
5V
Power (+) connection (220 mA max.)
RXD
Receive Data (RS-232)
TXD
Transmit Data (RS-232)
RTS
Request to Send (RS-232)
CTS
Clear to Send (RS-232)
For a list of protocols supported by each port, please refer to the Communications topic of the Do-more H2 Series PLC Overview
in this section.
Book 1 (14.2)
www.automationdirect.com/do-more-plcs
Do-more H2 PLCs
eDH-21
Prices as of April 15, 2015. Check Web site for most current prices.
CPU Modules
Ethernet Port
RJ-45 style connector used for:
• Connection to a PC running Do-more
Designer
• Modbus TCP Client connections (Modbus
requests sent from the CPU)
• Modbus TCP Server connections (Modbus
requests received by the CPU)
• Ethernet Expansion I/O Master
Ethernet Port Specifications
Description
Standard transformer isolated Ethernet port with built-in surge
protection for programming, online monitoring, Modbus/TCP
client/server connections (fixed IP or DHCP) and Ethernet
Expansion I/O capabilities.
Transfer Rate
Cables
10/100 Mbps
Use a Patch (straight through) cable when a switch or hub
is used.
Use a Crossover cable when a switch or hub is not used.
For a list of protocols supported by each port, please refer to the Communications topic of the Do-more H2 Series PLC Overview
in this section.
Book 1 (14.2)
eDH-22
Do-more H2 PLCs
1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
CPU Modules
Company
Information
Control Systems
Overview
Battery Specifications
A battery is included with the Do-more
CPU and is used to retain the Time and
Date along with any Tagname values that
are set up as retentive. It is recommended
that the battery be replaced once every
five years or when one year of cumulative
OFF time has been exceeded.
CLICK PLC
H2-DM1 and H2-DM1E
Battery Replacement
Part # D0-MC-BAT.
Do-More H2
PLC
Do-More T1H
PLC
DirectLOGIC
PLCs Overview
Up to two hours is allowed to change out
a battery without loss of data.
DirectLOGIC
DL05/06
DirectLOGIC
DL105
D0-MC-BAT is $3.00.
DirectLOGIC
DL205
Battery
D0-MC-BAT
Do-More
PLCs Overview
DirectLOGIC
DL305
Coin type, 3.0V Lithium
battery, number CR2032
DirectLOGIC
DL405
Productivity
Controller
Overview
Productivity
3000
Universal
Field I/O
Software
C-More
HMI
C-More Micro
HMI
ViewMarq
Industrial
Marquees
Other HMI
Communications
Appendix
Book 1
Terms and
Conditions
Book 1 (14.2)
www.automationdirect.com/do-more-plcs
Do-more H2 PLCs
eDH-23
Prices as of April 15, 2015. Check Web site for most current prices.
CPU Modules
Ethernet Expansion I/O
With Do-more Designer Software version V1.1 and newer, the
H2-DM1E CPU’s built-in Ethernet port can be configured as
an Ethernet Expansion I/O master. Much like the H2-ERM100
module, the Ethernet Expansion I/O feature allows expansion
beyond the local chassis to slave I/O using the onboard highspeed Ethernet link.
The Ethernet Expansion I/O network uses Category 5 UTP
cables for cable runs up to 100 meters (328 ft.) with extended
distances achieved through Ethernet switches.
It is highly recommended that a dedicated network be used with
the Ethernet Expansion I/O feature. Ethernet Expansion I/O
networks and ECOM/office networks should be isolated from
one another to prevent network delays.
The onboard Ethernet port can support up to 16 slave devices.
The slave I/O modules supported are:
• H2-EBC100
• T1H-EBC100 (Terminator I/O)
• GS-EDRV100 (GS Drives)
Stride
Ethernet
Switch
Do-more H2-DM1E CPU
H2-DM1E
DirectLOGIC
DL205 I/O with
H2-EBC100
Module
C-more Operator
Interface
GS-EDRV100
Terminator I/O
with T1H-EBC100
Module
GS
Drive
Book 1 (14.2)
eDH-24
Do-more H2 PLCs
1-800-633-0405
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement